654 ofertas

Año de construcción: usado
Ubicación: Land-former printing factory, with interior dimensions of approx. 47.7 x 36.3 meters and a usable area of round about 1.730 square metres, up for immediate deconstruction. in its second life cycle, this hall could serve to establish a factory, workshop, warehouse, etc.. 

structural steel work: the roof structure consists of hot-rolled and primed / coated steel frames based on supports made of reinforced concrete. the longitudinal stiffness of the hall we by wind bracings in the roof level and vertical bracings in the side walls. the roof substructure consists from trapezoidal load bearing steel panels.

approximate dimensions: 
width of the hall: approx. 36.30 meters inner wall; 
hall length: approx. 47.70 meters inner wall; 
clear height: 5.05 meters to the lowest steel beams; 
eave height: 4.50 m / 5.25 meters; 
building height: approx. 9.00 meters at the roof top; 
 
roof cladding: 
bituminous membrane, insulation, load bearing panels made of profiled sheet steel; 
wall cladding: the facade of the building consists of 30x75cm light concrete slabs. 
 
location: berlin. visit by appointment. 
documentation: the construction documents are being searched for in the archive of building authority. 

availability: april / may 2019.  

export-price: on written request with full company details.   FORMER PRINTING FACTORY, WITH INTERIOR DIMENSIONS OF APPROX. 47.7 X 36.3 METERS AND A USABLE AREA OF ROUND ABOUT 1.730 SQUARE METRES, UP FOR IMMEDIATE DECONSTRUCTION. IN ITS SECOND LIFE CYCLE, THIS HALL COULD SERVE TO ESTABLISH A FACTORY, WORKSHOP, WAREHOUSE, ETC.. STRUCTURAL STEEL WORK: THE ROOF STRUCTURE CONSISTS OF HOT-ROLLED AND PRIMED / COATED STEEL FRAMES BASED ON SUPPORTS MADE OF REINFORCED CONCRETE. THE LONGITUDINAL STIFFNESS OF THE HALL WE BY WIND BRACINGS IN THE ROOF LEVEL AND VERTICAL BRACINGS IN THE SIDE WALLS. THE ROOF SUBSTRUCTURE CONSISTS FROM TRAPEZOIDAL LOAD BEARING STEEL PANELS. APPROXIMATE DIMENSIONS: WIDTH OF THE HALL: APPROX. 36.30 METERS INNER WALL; HALL LENGTH: APPROX. 47.70 METERS INNER WALL; CLEAR HEIGHT: 5.05 METERS TO THE LOWEST STEEL BEAMS; EAVE HEIGHT: 4.50 M / 5.25 METERS; BUILDING HEIGHT: APPROX. 9.00 METERS AT THE ROOF TOP; ROOF CLADDING: BITUMINOUS MEMBRANE, INSULATION, LOAD BEARING PANELS MADE OF PROFILED SHEET STEEL; WALL CLADDING: THE FACADE OF THE BUILDING CONSISTS OF 30X75CM LIGHT CONCRETE SLABS. LOCATION: BERLIN. VISIT BY APPOINTMENT. DOCUMENTATION: THE CONSTRUCTION DOCUMENTS ARE BEING SEARCHED FOR IN THE ARCHIVE OF BUILDING AUTHORITY. AVAILABILITY: APRIL / MAY 2019. EXPORT-PRICE: ON WRITTEN REQUEST WITH FULL COMPANY DETAILS.
Vendedor: THAL BAUSATZHALLEN
Año de construcción: usado
Precio: used machinery auction RESALE 43.340 €
Ubicación: Land-weight approx.: 4100 kg<br/>dimensions (l x w x h) approx.: 2650 x 1700 x 2850 mm<br/>description: hauser s35-400 thread cutting machine<br> <br> adjustment ranges in the x-axis (table slide) 500 mm, in the y-axis (cross slide) 300 mm, in the w-axis (grinding head) 450 mm<br> feed and processing speed in the x-and y-axis (cnc-controlled) 0-1200 mm/min, adjustment speed 0-1200 mm/min<br> in the w-axis three-phase drive approx. 900 mm/min<br> smallest display unit x, y, u 0,0001 mm, smallest display unit z 0,001 mm, smallest display unit c 0,0001°, zero point arbitrarily selectable<br> reason deviation x, y, 0,003 mm<br> usable table surface 600 x 380 mm, permissible table load max. 250 kg, width of the t-slots 10 mm, number of t-slots 6, distance between the t-slots 50 mm<br> grinding spindle speed infinitely variable, with electric motors 4500 - 80000 min1, with air turbines up to 100000 and 160000 min1<br> planetary speed c infinitely variable 5-250 mm1, nc/c infinitely variable 0-5 min1<br> with quick stroke z infinitely variable 0. 5-12000 min1, max- stroke frequency 4 hz<br> stroke length z infinitely variable (shz) max. 110 mm, stroke length z (manual operation) max. 120 mm, diameter 100 mm, weight compensation pneumatic<br> radial infeed of the grinding wheel nc/u 5. 5 mm<br> , cylindrical grinding (with disc diameter 100 mm, without intermediate plate max. diameter 230 mm, with intermediate plate max. diameter 360 mm<br> included angle max. 16°, grinding depth at max. angle max. 44 mm<br> , WEIGHT APPROX.: 4100 KG
DIMENSIONS (L X W X H) APPROX.: 2650 X 1700 X 2850 MM
DESCRIPTION: HAUSER S35-400 THREAD CUTTING MACHINE

ADJUSTMENT RANGES IN THE X-AXIS (TABLE SLIDE) 500 MM, IN THE Y-AXIS (CROSS SLIDE) 300 MM, IN THE W-AXIS (GRINDING HEAD) 450 MM
FEED AND PROCESSING SPEED IN THE X-AND Y-AXIS (CNC-CONTROLLED) 0-1200 MM/MIN, ADJUSTMENT SPEED 0-1200 MM/MIN
IN THE W-AXIS THREE-PHASE DRIVE APPROX. 900 MM/MIN
SMALLEST DISPLAY UNIT X, Y, U 0,0001 MM, SMALLEST DISPLAY UNIT Z 0,001 MM, SMALLEST DISPLAY UNIT C 0,0001°, ZERO POINT ARBITRARILY SELECTABLE
REASON DEVIATION X, Y, 0,003 MM
USABLE TABLE SURFACE 600 X 380 MM, PERMISSIBLE TABLE LOAD MAX. 250 KG, WIDTH OF THE T-SLOTS 10 MM, NUMBER OF T-SLOTS 6, DISTANCE BETWEEN THE T-SLOTS 50 MM
GRINDING SPINDLE SPEED INFINITELY VARIABLE, WITH ELECTRIC MOTORS 4500 - 80000 MIN1, WITH AIR TURBINES UP TO 100000 AND 160000 MIN1
PLANETARY SPEED C INFINITELY VARIABLE 5-250 MM1, NC/C INFINITELY VARIABLE 0-5 MIN1
WITH QUICK STROKE Z INFINITELY VARIABLE 0. 5-12000 MIN1, MAX- STROKE FREQUENCY 4 HZ
STROKE LENGTH Z INFINITELY VARIABLE (SHZ) MAX. 110 MM, STROKE LENGTH Z (MANUAL OPERATION) MAX. 120 MM, DIAMETER 100 MM, WEIGHT COMPENSATION PNEUMATIC
RADIAL INFEED OF THE GRINDING WHEEL NC/U 5. 5 MM
, CYLINDRICAL GRINDING (WITH DISC DIAMETER 100 MM, WITHOUT INTERMEDIATE PLATE MAX. DIAMETER 230 MM, WITH INTERMEDIATE PLATE MAX. DIAMETER 360 MM
INCLUDED ANGLE MAX. 16°, GRINDING DEPTH AT MAX. ANGLE MAX. 44 MM
,
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-type: tr 7 d 200.6,0/5s-84 m â²
built in 2000
total baking area: 84 mâ²
required thermal power total ca. 504 kw
number of baking chambers: 7
each baking chamber baking surface: 12 mâ²
usable bandwidth: 2 m
exterior, back doors, input and output-
fronts, both sides, show - and maintenance-
doors made of stainless steel

equipment each baking chamber:
special-hinge-plate belt miwe spb with average
going flat baking surface without mesh printing
band load up to 50 kg / m â²
electro mechanical belt drive
back height inside: 200 mm

incl. thermal oil: supply temperature: 320 â° c
thermo-oil backraumtermperatur up to 300 â° c
(info: thermo-oil was 2013 replaced/renewed)
the heating and humidification is performed by separate
guess low pressure steam boiler
accessories: loos low pressure steam boiler with water softener

incl. miwe boiler central hkz
boiler max power. 350 kw
with elco burner for natural gas
without tank tank!
year 2000 (2013 electrically partly renewed)

incl. miwe docking station ads
for fermentation car size: 2, 0 x 0, 6 x 1, 95 m (no car)
including safety device
built in 2000

incl. miwe butler
bandwidth/m: 2.0
step length/m: 1.20
with plc
tipping for rolls
built in 2000
 TYPE: TR 7 D 200.6,0/5S-84 M &ACIRC;&SUP2; BUILT IN 2000 TOTAL BAKING AREA: 84 M&ACIRC;&SUP2; REQUIRED THERMAL POWER TOTAL CA. 504 KW NUMBER OF BAKING CHAMBERS: 7 EACH BAKING CHAMBER BAKING SURFACE: 12 M&ACIRC;&SUP2; USABLE BANDWIDTH: 2 M EXTERIOR, BACK DOORS, INPUT AND OUTPUT- FRONTS, BOTH SIDES, SHOW - AND MAINTENANCE- DOORS MADE OF STAINLESS STEEL EQUIPMENT EACH BAKING CHAMBER: SPECIAL-HINGE-PLATE BELT MIWE SPB WITH AVERAGE GOING FLAT BAKING SURFACE WITHOUT MESH PRINTING BAND LOAD UP TO 50 KG / M &ACIRC;&SUP2; ELECTRO MECHANICAL BELT DRIVE BACK HEIGHT INSIDE: 200 MM INCL. THERMAL OIL: SUPPLY TEMPERATURE: 320 &ACIRC;&DEG; C THERMO-OIL BACKRAUMTERMPERATUR UP TO 300 &ACIRC;&DEG; C (INFO: THERMO-OIL WAS 2013 REPLACED/RENEWED) THE HEATING AND HUMIDIFICATION IS PERFORMED BY SEPARATE GUESS LOW PRESSURE STEAM BOILER ACCESSORIES: LOOS LOW PRESSURE STEAM BOILER WITH WATER SOFTENER INCL. MIWE BOILER CENTRAL HKZ BOILER MAX POWER. 350 KW WITH ELCO BURNER FOR NATURAL GAS WITHOUT TANK TANK! YEAR 2000 (2013 ELECTRICALLY PARTLY RENEWED) INCL. MIWE DOCKING STATION ADS FOR FERMENTATION CAR SIZE: 2, 0 X 0, 6 X 1, 95 M (NO CAR) INCLUDING SAFETY DEVICE BUILT IN 2000 INCL. MIWE BUTLER BANDWIDTH/M: 2.0 STEP LENGTH/M: 1.20 WITH PLC TIPPING FOR ROLLS BUILT IN 2000
Vendedor: Backservice Gaux GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 2.500 €
Ubicación: Land-weight approx.: 20000 kg<br/>dimensions (l x w x h) approx.: 8000 x 5000 x 5000 mm<br/>description: usable space 3500 x 2500 x 600 mm, cooker load capacity max. 2500 kg, heating time approx. 2 h, operating temperature max. 1000° c, working temperature 700 to 1000° c, heating medium natural gas, self disassembly is possible WEIGHT APPROX.: 20000 KG
DIMENSIONS (L X W X H) APPROX.: 8000 X 5000 X 5000 MM
DESCRIPTION: USABLE SPACE 3500 X 2500 X 600 MM, COOKER LOAD CAPACITY MAX. 2500 KG, HEATING TIME APPROX. 2 H, OPERATING TEMPERATURE MAX. 1000° C, WORKING TEMPERATURE 700 TO 1000° C, HEATING MEDIUM NATURAL GAS, SELF DISASSEMBLY IS POSSIBLE
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 8.820 €
Ubicación: Land-thread cutting device
freischneiden setup
drilling depth shut off programmable
drilling depth and speed display - digital
thread cutting device m30 (depending on elevation)
r1 spindle speed with continuous transmission speed series 100-2000 1 / min
r2 spindle speed with continuous transmission speed range 70-1400 1/min
drilling capacity 35/40 mm
spindle mk 4
drilling depth 160 mm
throat depth 300 mm
usable surface (pivoting) 590 x 450 mm
feed 0-300 mm / min stepless
table height with rack and pinion
machine dimensions (w x d x h) 610 x 850 x 1920 mm
motor three-phase 400 v pole changing bar 1,5/3,0 kw
weight 420 kg

including drilling package consisting: taper mandrel, chuck, vice and t - groove set. 
option: spindle stop and modulus of rupture of chip 660 eur

delivery: free house including packaging

not the right machine?
we do also other afloat products - ask for a quote!

flott base partner *. THREAD CUTTING DEVICE FREISCHNEIDEN SETUP DRILLING DEPTH SHUT OFF PROGRAMMABLE DRILLING DEPTH AND SPEED DISPLAY - DIGITAL THREAD CUTTING DEVICE M30 (DEPENDING ON ELEVATION) R1 SPINDLE SPEED WITH CONTINUOUS TRANSMISSION SPEED SERIES 100-2000 1 / MIN R2 SPINDLE SPEED WITH CONTINUOUS TRANSMISSION SPEED RANGE 70-1400 1/MIN DRILLING CAPACITY 35/40 MM SPINDLE MK 4 DRILLING DEPTH 160 MM THROAT DEPTH 300 MM USABLE SURFACE (PIVOTING) 590 X 450 MM FEED 0-300 MM / MIN STEPLESS TABLE HEIGHT WITH RACK AND PINION MACHINE DIMENSIONS (W X D X H) 610 X 850 X 1920 MM MOTOR THREE-PHASE 400 V POLE CHANGING BAR 1,5/3,0 KW WEIGHT 420 KG INCLUDING DRILLING PACKAGE CONSISTING: TAPER MANDREL, CHUCK, VICE AND T - GROOVE SET. OPTION: SPINDLE STOP AND MODULUS OF RUPTURE OF CHIP 660 EUR DELIVERY: FREE HOUSE INCLUDING PACKAGING NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER *.
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Precio: 5.890 €
Ubicación: Land-drilling depth and speed display - digital
thread cutting device m30 (depending on elevation)
r1 spindle speed with continuous transmission speed series 100-2000 1 / min
r2 spindle speed with continuous transmission speed range 70-1400 1/min
drilling capacity 35/40 mm
spindle mk 4
drilling depth 160 mm
throat depth 300 mm
usable surface (pivoting) 590 x 450 mm
feed by hand
table height with rack and pinion
machine dimensions (w x d x h) 610 x 850 x 1920 mm
motor three-phase 400 v pole changing bar 1,5/3,0 kw
weight 420 kg

including drilling package consisting: taper mandrel, chuck, vice and t - groove set. 

delivery: free house including packaging

not the right machine?
we do also other afloat products - ask for a quote!

flott base partner *. DRILLING DEPTH AND SPEED DISPLAY - DIGITAL THREAD CUTTING DEVICE M30 (DEPENDING ON ELEVATION) R1 SPINDLE SPEED WITH CONTINUOUS TRANSMISSION SPEED SERIES 100-2000 1 / MIN R2 SPINDLE SPEED WITH CONTINUOUS TRANSMISSION SPEED RANGE 70-1400 1/MIN DRILLING CAPACITY 35/40 MM SPINDLE MK 4 DRILLING DEPTH 160 MM THROAT DEPTH 300 MM USABLE SURFACE (PIVOTING) 590 X 450 MM FEED BY HAND TABLE HEIGHT WITH RACK AND PINION MACHINE DIMENSIONS (W X D X H) 610 X 850 X 1920 MM MOTOR THREE-PHASE 400 V POLE CHANGING BAR 1,5/3,0 KW WEIGHT 420 KG INCLUDING DRILLING PACKAGE CONSISTING: TAPER MANDREL, CHUCK, VICE AND T - GROOVE SET. DELIVERY: FREE HOUSE INCLUDING PACKAGING NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER *.
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Ubicación: Land-turning diameter: max. 260 mm<br/>turning length: 450 mm<br/>control: sinumerik siemens<br/>greates pass round over bed: 330 mm<br/>standard turning dia.: 200 mm<br/>main spindle::  <br/>max. rpm: 5.000 min/-1<br/>power capacity - main spindel: 11 / 16,5 kw<br/>max. torque: 166,5 nm<br/>spindle diameter in front bearing: 100 mm<br/>spindle bore: 68,5 mm<br/>max. bar capacity: 65 mm<br/>usable bar diameter: ( - ) mm<br/>max. chucking diameter: 210 mm<br/>spindle taper: 140h5 <br/>c-axis: 0,001 °<br/>axis stroke::  <br/>x-axis: 182,5 mm<br/>z-axis: 455 mm<br/>c-axis: 360 °<br/>turret::  <br/>number of toolpositions: 12 pos.<br/>number of driven toolspositions: 12 pos.<br/>tool taper: vdi 30 <br/>spindle speed - driven tool stations: max. 4.500 min -1<br/>power capacity - driven tool-stations: 8,4 kw<br/>max. torque: 20 nm<br/>tailstock::  <br/>tailstock adjustment: 396 mm<br/>tension force: 4 kn<br/>capture: mk 4 <br/>total power requirement: 21 kw<br/>weight of the machine ca.: 3,4 t<br/>dimensions of the machine ca.: 6,5 x 3,0 x 2,1 m<br/>documents:  <br/>chip conveyor:  <br/>coolantsystem:  <br/>c-axis:  <br/>turret:  <br/>cnc-turning- and millingcenter<br/>dmg mori - ecoturn 310 v3<br/><br/>- only ca. 600h operating-hours<br/><br/><br/><br/><br/> TURNING DIAMETER: MAX. 260 MM
TURNING LENGTH: 450 MM
CONTROL: SINUMERIK SIEMENS
GREATES PASS ROUND OVER BED: 330 MM
STANDARD TURNING DIA.: 200 MM
MAIN SPINDLE::
MAX. RPM: 5.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 11 / 16,5 KW
MAX. TORQUE: 166,5 NM
SPINDLE DIAMETER IN FRONT BEARING: 100 MM
SPINDLE BORE: 68,5 MM
MAX. BAR CAPACITY: 65 MM
USABLE BAR DIAMETER: ( - ) MM
MAX. CHUCKING DIAMETER: 210 MM
SPINDLE TAPER: 140H5
C-AXIS: 0,001 °
AXIS STROKE::
X-AXIS: 182,5 MM
Z-AXIS: 455 MM
C-AXIS: 360 °
TURRET::
NUMBER OF TOOLPOSITIONS: 12 POS.
NUMBER OF DRIVEN TOOLSPOSITIONS: 12 POS.
TOOL TAPER: VDI 30
SPINDLE SPEED - DRIVEN TOOL STATIONS: MAX. 4.500 MIN -1
POWER CAPACITY - DRIVEN TOOL-STATIONS: 8,4 KW
MAX. TORQUE: 20 NM
TAILSTOCK::
TAILSTOCK ADJUSTMENT: 396 MM
TENSION FORCE: 4 KN
CAPTURE: MK 4
TOTAL POWER REQUIREMENT: 21 KW
WEIGHT OF THE MACHINE CA.: 3,4 T
DIMENSIONS OF THE MACHINE CA.: 6,5 X 3,0 X 2,1 M
DOCUMENTS:
CHIP CONVEYOR:
COOLANTSYSTEM:
C-AXIS:
TURRET:
CNC-TURNING- AND MILLINGCENTER
DMG MORI - ECOTURN 310 V3

- ONLY CA. 600H OPERATING-HOURS




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-year of construction: 2006
hours of operation machine: 25.436 h (06.03.2019)
pressing force approx.: 850 kn
bending length approx.: 2210 mm
control: tasc 6000
working height approx.: 1050 mm
free stand round about: 1750 mm
usable height approx.: 615 mm
space requirements: 2840 x 3100 x 1740 mm
approximate weight machine: 7,800 kg
total connected load approx.: 17 kva

hours of operation a machine: 25.436 h (06.03.2019)
a hydraulic: 17.535 h (06.03.2019)
run-time compression beams: 2593 h (06.03.2019)

standard equipment
-stable machine frame in all-steel construction
-pressure bar with high flexural strength
-electro-hydraulic top drive proportional valves - modern block hydraulic - cnc back gauge with gear rack / bevel drive, for x - and r axes, risk free move the stop fingers from the front - top tool clamping hydraulically
substation stuff for ev matrices, hydraulic clamping, programmable shift (2 positions) - safety device, roll protection covers rear - enclosure air conditioning control
-tasc 6000
-network capability

advanced machine equipment
-increase height/stroke
-additional stop fingers 2-axis
-crowning cnc
-safety device bendguard
-acb preparation
-edition console
-tasc 6000 characters module topscad

technical data subject to change - subject to prior sale
the operating hours for delivery of the machine may differ from the hours recorded in the offer YEAR OF CONSTRUCTION: 2006 HOURS OF OPERATION MACHINE: 25.436 H (06.03.2019) PRESSING FORCE APPROX.: 850 KN BENDING LENGTH APPROX.: 2210 MM CONTROL: TASC 6000 WORKING HEIGHT APPROX.: 1050 MM FREE STAND ROUND ABOUT: 1750 MM USABLE HEIGHT APPROX.: 615 MM SPACE REQUIREMENTS: 2840 X 3100 X 1740 MM APPROXIMATE WEIGHT MACHINE: 7,800 KG TOTAL CONNECTED LOAD APPROX.: 17 KVA HOURS OF OPERATION A MACHINE: 25.436 H (06.03.2019) A HYDRAULIC: 17.535 H (06.03.2019) RUN-TIME COMPRESSION BEAMS: 2593 H (06.03.2019) STANDARD EQUIPMENT -STABLE MACHINE FRAME IN ALL-STEEL CONSTRUCTION -PRESSURE BAR WITH HIGH FLEXURAL STRENGTH -ELECTRO-HYDRAULIC TOP DRIVE PROPORTIONAL VALVES - MODERN BLOCK HYDRAULIC - CNC BACK GAUGE WITH GEAR RACK / BEVEL DRIVE, FOR X - AND R AXES, RISK FREE MOVE THE STOP FINGERS FROM THE FRONT - TOP TOOL CLAMPING HYDRAULICALLY SUBSTATION STUFF FOR EV MATRICES, HYDRAULIC CLAMPING, PROGRAMMABLE SHIFT (2 POSITIONS) - SAFETY DEVICE, ROLL PROTECTION COVERS REAR - ENCLOSURE AIR CONDITIONING CONTROL -TASC 6000 -NETWORK CAPABILITY ADVANCED MACHINE EQUIPMENT -INCREASE HEIGHT/STROKE -ADDITIONAL STOP FINGERS 2-AXIS -CROWNING CNC -SAFETY DEVICE BENDGUARD -ACB PREPARATION -EDITION CONSOLE -TASC 6000 CHARACTERS MODULE TOPSCAD TECHNICAL DATA SUBJECT TO CHANGE - SUBJECT TO PRIOR SALE THE OPERATING HOURS FOR DELIVERY OF THE MACHINE MAY DIFFER FROM THE HOURS RECORDED IN THE OFFER
Vendedor: mteg GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 39.000 €
Ubicación: Land-weight approx.: 2500 kg<br/>pressure: 20 to<br/>dimensions (l x w x h) approx.: 1550 x 1800 x 1965 mm<br/>description: <b>this is a demonstration machine in stock!</b><br> ergonomic press brake made of a rigid monoblock frame (mehaanite 700 n/mm²)<br> the machine has a direct drive via servo motor and ball screw which works on tension to avoid deformation.<br> in addition, the machine is equipped with a 6-axis backgauge, a teda quick tool clamp and an iris rapid bend safety device<br> <br> - serial number: fx85610002580<br> - bending capacity: 200 kn<br> - usable bending length: 850 mm<br> - y-axis travel stroke: 1956 mm<br> - y-axis speed: 200 mm/sec<br> - installation height(table to upper bending beam): 470 (395) mm<br> - x axis travel stroke (6 axes x1-x2-r1-r2-z1-z2): 375 mm<br> - r axis travel stroke (6 axes x1-x2-r1-r2-z1-z2: 180 mm<br> - z axis speed (6 axes x1-x2-r1-r2-z1-z2): 744 mm/sec<br> - x axis velocity (6 axes x1-x2-r1-r2-z1-z2): 1000 mm/sec<br> - r axis speed (6 axes x1-x2-r1-r2-z1-z2): 350 mm/sec<br> - z axis speed (6 axes x1-x2-r1-r2-z1-z2): 220 mm/sec<br> - wireless connection / wireless / usb-port: yes / 2<br> - main motor power: 1x5,2 kw<br> - connection power: 5 kwa<br> <br> <b>accessories:</b><br> - top promecam tool holder (without tools) with quick-release lever<br> - below tool holder for amada / promecam and wila plug-in matrices<br> - cnc control panasonic toughbook incl. battery, usb connection and wifi<br> - anti-reflective lcd touchscreen<br> - safety device dual laser<br> - rigid mehaanite monoblock cast iron body tensile strength 700n/mm²<br> - direct drive via servo motor and recirculating ball screw<br> - 2-axle backgauge moves<br> - ergonomic design<br> <br> <b>special accessories:</b><br> teda speed grip quick-change system top, for standard amada/promecam tools<br> 6 axes backgauge x1/x2/r1/r2/z1/z2<br> iris rapid bend, safety device, travels at rapid traverse to the mute point<br> <br> the machine can be transported by forkl WEIGHT APPROX.: 2500 KG
PRESSURE: 20 TO
DIMENSIONS (L X W X H) APPROX.: 1550 X 1800 X 1965 MM
DESCRIPTION: THIS IS A DEMONSTRATION MACHINE IN STOCK!
ERGONOMIC PRESS BRAKE MADE OF A RIGID MONOBLOCK FRAME (MEHAANITE 700 N/MM²)
THE MACHINE HAS A DIRECT DRIVE VIA SERVO MOTOR AND BALL SCREW WHICH WORKS ON TENSION TO AVOID DEFORMATION.
IN ADDITION, THE MACHINE IS EQUIPPED WITH A 6-AXIS BACKGAUGE, A TEDA QUICK TOOL CLAMP AND AN IRIS RAPID BEND SAFETY DEVICE

- SERIAL NUMBER: FX85610002580
- BENDING CAPACITY: 200 KN
- USABLE BENDING LENGTH: 850 MM
- Y-AXIS TRAVEL STROKE: 1956 MM
- Y-AXIS SPEED: 200 MM/SEC
- INSTALLATION HEIGHT(TABLE TO UPPER BENDING BEAM): 470 (395) MM
- X AXIS TRAVEL STROKE (6 AXES X1-X2-R1-R2-Z1-Z2): 375 MM
- R AXIS TRAVEL STROKE (6 AXES X1-X2-R1-R2-Z1-Z2: 180 MM
- Z AXIS SPEED (6 AXES X1-X2-R1-R2-Z1-Z2): 744 MM/SEC
- X AXIS VELOCITY (6 AXES X1-X2-R1-R2-Z1-Z2): 1000 MM/SEC
- R AXIS SPEED (6 AXES X1-X2-R1-R2-Z1-Z2): 350 MM/SEC
- Z AXIS SPEED (6 AXES X1-X2-R1-R2-Z1-Z2): 220 MM/SEC
- WIRELESS CONNECTION / WIRELESS / USB-PORT: YES / 2
- MAIN MOTOR POWER: 1X5,2 KW
- CONNECTION POWER: 5 KWA

ACCESSORIES:
- TOP PROMECAM TOOL HOLDER (WITHOUT TOOLS) WITH QUICK-RELEASE LEVER
- BELOW TOOL HOLDER FOR AMADA / PROMECAM AND WILA PLUG-IN MATRICES
- CNC CONTROL PANASONIC TOUGHBOOK INCL. BATTERY, USB CONNECTION AND WIFI
- ANTI-REFLECTIVE LCD TOUCHSCREEN
- SAFETY DEVICE DUAL LASER
- RIGID MEHAANITE MONOBLOCK CAST IRON BODY TENSILE STRENGTH 700N/MM²
- DIRECT DRIVE VIA SERVO MOTOR AND RECIRCULATING BALL SCREW
- 2-AXLE BACKGAUGE MOVES
- ERGONOMIC DESIGN

SPECIAL ACCESSORIES:
TEDA SPEED GRIP QUICK-CHANGE SYSTEM TOP, FOR STANDARD AMADA/PROMECAM TOOLS
6 AXES BACKGAUGE X1/X2/R1/R2/Z1/Z2
IRIS RAPID BEND, SAFETY DEVICE, TRAVELS AT RAPID TRAVERSE TO THE MUTE POINT

THE MACHINE CAN BE TRANSPORTED BY FORKL
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 8.100 €
Ubicación: Land-thread cutting device freischneiden device drilling depth shut off programmable drilling depth and speed display - digital thread cutter m24 (gradient-dependent) variable speed 125-2000 1 / min drilling capacity 25/30 mm spindle mk 3 drilling depth	125 mm projection of 280 mm-usable desk space (pivoting) 420 x 340 mm
feed 0-300 mm / min stepless adjustable anvil with rack machines dimensions (w x d x h) 520 x 820 x 1900 mm motor three-phase 400 v pole changing bar 1.5 / 2 kw weight 300 kg including drilling package, which includes: taper mandrel, chuck, vice and t - groove set. 
option: spindle stop and chip fracture module 690 eur delivery: free house including packaging not the right machine? 
we do also other afloat products - ask for a quote! 

flott base partner *. THREAD CUTTING DEVICE FREISCHNEIDEN DEVICE DRILLING DEPTH SHUT OFF PROGRAMMABLE DRILLING DEPTH AND SPEED DISPLAY - DIGITAL THREAD CUTTER M24 (GRADIENT-DEPENDENT) VARIABLE SPEED 125-2000 1 / MIN DRILLING CAPACITY 25/30 MM SPINDLE MK 3 DRILLING DEPTH 125 MM PROJECTION OF 280 MM-USABLE DESK SPACE (PIVOTING) 420 X 340 MM FEED 0-300 MM / MIN STEPLESS ADJUSTABLE ANVIL WITH RACK MACHINES DIMENSIONS (W X D X H) 520 X 820 X 1900 MM MOTOR THREE-PHASE 400 V POLE CHANGING BAR 1.5 / 2 KW WEIGHT 300 KG INCLUDING DRILLING PACKAGE, WHICH INCLUDES: TAPER MANDREL, CHUCK, VICE AND T - GROOVE SET. OPTION: SPINDLE STOP AND CHIP FRACTURE MODULE 690 EUR DELIVERY: FREE HOUSE INCLUDING PACKAGING NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER *.
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Ubicación: Land-turning diameter: max. 390 mm<br/>turning length: max. 424 mm<br/>control: fanuc 18 i-m  (msd 501-ii)<br/>greates pass round over bed: 680 mm<br/>swing dia. over traverse guideway: 510 mm<br/>standard turning dia.: 180 mm<br/>centre distance: 752 mm<br/>main spindle::  <br/>turning speed range - main spindle: 40 - 4.000 min/-1<br/>power capacity - main spindel: 11 / 7,5 kw<br/>spindle bearing diameter: 110 mm<br/>spindle bore: 76 mm<br/>max. bar capacity: 65 mm<br/>usable bar diameter: 65 mm<br/>spindle nose: jis a2-6 <br/>c-axis: 0,001 °<br/>subspindle::  <br/>spindle speed range subspindle: 60 - 6.000 min/-1<br/>power capacity - sub spindle: 7,5 / 5,5 kw<br/>spindle bearing diameter: 80 mm<br/>spindle bore: 43 mm<br/>usable bar diameter: - mm<br/>spindle nose: jis a2-5 <br/>c-axis: 0,001 °<br/>traverses subspindle: b: 505 mm<br/>turret::  <br/>number of turret: 2 <br/>number of toolpositions: 12 + 8 pos.<br/>number of driven toolspositions: 12 + 8 pos.<br/>spindle speed - driven tool stations: max. 3.000 min -1<br/>power capacity driven tool-stations: 1: 6,5 / 4,4 kw<br/>power capacity driven tool-stations: 2: 1,9 / 1,4 kw<br/>shank height for square tool: 25 mm<br/>drill shank diameter: max. 50 mm<br/>turret change time: 0,3 sec.<br/>feeds::  <br/>rapid traverse: x: 18 / z: 24 m/min<br/>feed speeds: max. 24.000 mm/min<br/>tipp feed: 0 - 1.260 mm/min<br/>axis stroke::  <br/>x-axis: 1: 235 (195 + 40) mm<br/>x-axis: 2: 175 (147 + 28) mm<br/>z-axis: 1: 520 mm<br/>z-axis: 2: 490 mm<br/>b-axis: 505 mm<br/>total power requirement: 51 kva<br/>weight of the machine ca.: 5,9 t<br/>dimensions of the machine ca.: 8,5 x 2,5 x 2,2 m<br/>documents:  <br/>chip conveyor:  <br/>coolantsystem:  <br/>bar feeder interface:  <br/>bar feeder: irco profimat 65.6-196.6 <br/>driven tools: 10x <br/>fixed tool-holders:  <br/>cnc - turning- and millingcenter<br/>mori seiki - zl 200 smc<br/><br/>- main- and subspindle<br/>- two turrets<br/>- tool drive<br/>- barloader irco profimat<br/><br/><br/><br/><br/> TURNING DIAMETER: MAX. 390 MM
TURNING LENGTH: MAX. 424 MM
CONTROL: FANUC 18 I-M (MSD 501-II)
GREATES PASS ROUND OVER BED: 680 MM
SWING DIA. OVER TRAVERSE GUIDEWAY: 510 MM
STANDARD TURNING DIA.: 180 MM
CENTRE DISTANCE: 752 MM
MAIN SPINDLE::
TURNING SPEED RANGE - MAIN SPINDLE: 40 - 4.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 11 / 7,5 KW
SPINDLE BEARING DIAMETER: 110 MM
SPINDLE BORE: 76 MM
MAX. BAR CAPACITY: 65 MM
USABLE BAR DIAMETER: 65 MM
SPINDLE NOSE: JIS A2-6
C-AXIS: 0,001 °
SUBSPINDLE::
SPINDLE SPEED RANGE SUBSPINDLE: 60 - 6.000 MIN/-1
POWER CAPACITY - SUB SPINDLE: 7,5 / 5,5 KW
SPINDLE BEARING DIAMETER: 80 MM
SPINDLE BORE: 43 MM
USABLE BAR DIAMETER: - MM
SPINDLE NOSE: JIS A2-5
C-AXIS: 0,001 °
TRAVERSES SUBSPINDLE: B: 505 MM
TURRET::
NUMBER OF TURRET: 2
NUMBER OF TOOLPOSITIONS: 12 + 8 POS.
NUMBER OF DRIVEN TOOLSPOSITIONS: 12 + 8 POS.
SPINDLE SPEED - DRIVEN TOOL STATIONS: MAX. 3.000 MIN -1
POWER CAPACITY DRIVEN TOOL-STATIONS: 1: 6,5 / 4,4 KW
POWER CAPACITY DRIVEN TOOL-STATIONS: 2: 1,9 / 1,4 KW
SHANK HEIGHT FOR SQUARE TOOL: 25 MM
DRILL SHANK DIAMETER: MAX. 50 MM
TURRET CHANGE TIME: 0,3 SEC.
FEEDS::
RAPID TRAVERSE: X: 18 / Z: 24 M/MIN
FEED SPEEDS: MAX. 24.000 MM/MIN
TIPP FEED: 0 - 1.260 MM/MIN
AXIS STROKE::
X-AXIS: 1: 235 (195 + 40) MM
X-AXIS: 2: 175 (147 + 28) MM
Z-AXIS: 1: 520 MM
Z-AXIS: 2: 490 MM
B-AXIS: 505 MM
TOTAL POWER REQUIREMENT: 51 KVA
WEIGHT OF THE MACHINE CA.: 5,9 T
DIMENSIONS OF THE MACHINE CA.: 8,5 X 2,5 X 2,2 M
DOCUMENTS:
CHIP CONVEYOR:
COOLANTSYSTEM:
BAR FEEDER INTERFACE:
BAR FEEDER: IRCO PROFIMAT 65.6-196.6
DRIVEN TOOLS: 10X
FIXED TOOL-HOLDERS:
CNC - TURNING- AND MILLINGCENTER
MORI SEIKI - ZL 200 SMC

- MAIN- AND SUBSPINDLE
- TWO TURRETS
- TOOL DRIVE
- BARLOADER IRCO PROFIMAT




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Precio: 7.990 €
Ubicación: Land-thread cutting device
freischneiden setup
drilling depth shut off programmable
drilling depth and speed display - digital
thread cutter m20 (depending on elevation)
variable speed of 125-4000 u/mon in two stages, stage change of belt apportionment.
drilling capacity 25/30 mm
spindle mk 3
drilling depth 125 mm
projection 280 mm
usable surface (pivoting) 420 x 340 mm
feed 0-300 mm / min stepless
table height with rack and pinion
machine dimensions (w x d x h) 520 x 820 x 1900 mm
motor three-phase 400 v pole changing bar 0.9 / 1.45 kw
weight 300 kg

including drilling package consisting: taper mandrel, chuck, vice and t - groove set. 

option: spindle stop and chip fracture module 690 eur

delivery: free house including packaging

not the right machine?
we do also other afloat products - ask for a quote!

flott base partner *.
 THREAD CUTTING DEVICE FREISCHNEIDEN SETUP DRILLING DEPTH SHUT OFF PROGRAMMABLE DRILLING DEPTH AND SPEED DISPLAY - DIGITAL THREAD CUTTER M20 (DEPENDING ON ELEVATION) VARIABLE SPEED OF 125-4000 U/MON IN TWO STAGES, STAGE CHANGE OF BELT APPORTIONMENT. DRILLING CAPACITY 25/30 MM SPINDLE MK 3 DRILLING DEPTH 125 MM PROJECTION 280 MM USABLE SURFACE (PIVOTING) 420 X 340 MM FEED 0-300 MM / MIN STEPLESS TABLE HEIGHT WITH RACK AND PINION MACHINE DIMENSIONS (W X D X H) 520 X 820 X 1900 MM MOTOR THREE-PHASE 400 V POLE CHANGING BAR 0.9 / 1.45 KW WEIGHT 300 KG INCLUDING DRILLING PACKAGE CONSISTING: TAPER MANDREL, CHUCK, VICE AND T - GROOVE SET. OPTION: SPINDLE STOP AND CHIP FRACTURE MODULE 690 EUR DELIVERY: FREE HOUSE INCLUDING PACKAGING NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER *.
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Precio: used machinery auction RESALE 240 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 600 x 800 x 600  mm<br/>description: esab compact 315 e welding device<br> <br> professional, welding power 50a/15v - 315a/30v WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 800 X 600 MM
DESCRIPTION: ESAB COMPACT 315 E WELDING DEVICE

PROFESSIONAL, WELDING POWER 50A/15V - 315A/30V
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 5.175 €
Ubicación: Land-ear-deep and speed display - digital thread cutter m20 (gradient-dependent) variable speed 125-4000 u/mon in two stages, stage change of belt apportionment. 

drilling capacity 525/30 mm of thread cutting capacity (depending on elevation) m20 spindle mk 3 drilling depth 125 mm projection of 280 mm-usable table surface (pivoting) 420 x 340 mm
feed rate of hand table height with rack machines dimensions (w x d x h) 520 x 820 x 1900 mm motor three-phase 400 v pole changing bar 0.9 / 1.45 kw weight 275 kg EAR-DEEP AND SPEED DISPLAY - DIGITAL THREAD CUTTER M20 (GRADIENT-DEPENDENT) VARIABLE SPEED 125-4000 U/MON IN TWO STAGES, STAGE CHANGE OF BELT APPORTIONMENT. DRILLING CAPACITY 525/30 MM OF THREAD CUTTING CAPACITY (DEPENDING ON ELEVATION) M20 SPINDLE MK 3 DRILLING DEPTH 125 MM PROJECTION OF 280 MM-USABLE TABLE SURFACE (PIVOTING) 420 X 340 MM FEED RATE OF HAND TABLE HEIGHT WITH RACK MACHINES DIMENSIONS (W X D X H) 520 X 820 X 1900 MM MOTOR THREE-PHASE 400 V POLE CHANGING BAR 0.9 / 1.45 KW WEIGHT 275 KG
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Precio: used machinery auction RESALE 2.780 €
Ubicación: Land-weight approx.: 4000 kg<br/>dimensions (l x w x h) approx.: 4200 x 1200 x 2300 mm<br/>description: sabi vertical bandsaw cutting performance 0°, round material 500 mm<br> cutting performance 0°, flat material 850 x 450 mm<br> right + left = 600 x 450 mm<br> cutting speed 15 - 105 m/min<br> blade dimensions 7425 x 51 x 1. 6 mm<br> working height 837 mm<br> saw motor power 7. 5 kw<br> incl. control panel<br> <b>without feed unit, infeed and outfeed belts</b> WEIGHT APPROX.: 4000 KG
DIMENSIONS (L X W X H) APPROX.: 4200 X 1200 X 2300 MM
DESCRIPTION: SABI VERTICAL BANDSAW CUTTING PERFORMANCE 0°, ROUND MATERIAL 500 MM
CUTTING PERFORMANCE 0°, FLAT MATERIAL 850 X 450 MM
RIGHT + LEFT = 600 X 450 MM
CUTTING SPEED 15 - 105 M/MIN
BLADE DIMENSIONS 7425 X 51 X 1. 6 MM
WORKING HEIGHT 837 MM
SAW MOTOR POWER 7. 5 KW
INCL. CONTROL PANEL
WITHOUT FEED UNIT, INFEED AND OUTFEED BELTS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-refrigeration screw compressor duopack sab 128 hf - 750 kw

this is a chiller package made by sabroe denmark in 2002, cooling capacity 750 kw, adjustable for 10-100% load. the package consist of two separate liquid cooling screw compressors type sab 128 hf (duopack) with their own electric motor, both operating with r22 refrigerant. units are built on a common base frame with an integrated horizontally mounted common oil separator, oil circulation pump, oil filter, suction- discharge- and safety valves. unit has local control unit unisab iii system. unit was dismantled in year 2014 and is ready for immediate shipment

lubrication oil of the refrigeration compressor is fed to the compressors during the compression process for lubrication, sealing, noise reduction and to remove some of the heat of compression. after the compression process, the oil is separated from the refrigerant in the oil separator. the refrigerant-oil mixture is led into the lower part of the vertical oil separator. there, the first step of oil separation is performed by a combined agglomerator/ demister. the lower part of the oil separator is also used as an oil receiver. the fine separation of the aerosol-type oil portion from the refrigerant is carried out in the upper part of the oil separator by means of coalescing cartridges. the oil separated in the fine section of the oil separator is returned to the compressors suction side via an additional injection orifice.

technical data
manufacturer: york sabroe denmark
manufacturing year: 2002
compressor type: sab 128 hf (duopack)
refrigerant: r 22
cooling capacity: 2 x 379 kw ( 0 /+40c)
swept volume: 2 x 454 m3/h
electric drives (compressor): 2 x 110 kw - 400/690 v 50hz (also suitable for 60hz)
control system: unisab iii   REFRIGERATION SCREW COMPRESSOR DUOPACK SAB 128 HF - 750 KW THIS IS A CHILLER PACKAGE MADE BY SABROE DENMARK IN 2002, COOLING CAPACITY 750 KW, ADJUSTABLE FOR 10-100% LOAD. THE PACKAGE CONSIST OF TWO SEPARATE LIQUID COOLING SCREW COMPRESSORS TYPE SAB 128 HF (DUOPACK) WITH THEIR OWN ELECTRIC MOTOR, BOTH OPERATING WITH R22 REFRIGERANT. UNITS ARE BUILT ON A COMMON BASE FRAME WITH AN INTEGRATED HORIZONTALLY MOUNTED COMMON OIL SEPARATOR, OIL CIRCULATION PUMP, OIL FILTER, SUCTION- DISCHARGE- AND SAFETY VALVES. UNIT HAS LOCAL CONTROL UNIT UNISAB III SYSTEM. UNIT WAS DISMANTLED IN YEAR 2014 AND IS READY FOR IMMEDIATE SHIPMENT LUBRICATION OIL OF THE REFRIGERATION COMPRESSOR IS FED TO THE COMPRESSORS DURING THE COMPRESSION PROCESS FOR LUBRICATION, SEALING, NOISE REDUCTION AND TO REMOVE SOME OF THE HEAT OF COMPRESSION. AFTER THE COMPRESSION PROCESS, THE OIL IS SEPARATED FROM THE REFRIGERANT IN THE OIL SEPARATOR. THE REFRIGERANT-OIL MIXTURE IS LED INTO THE LOWER PART OF THE VERTICAL OIL SEPARATOR. THERE, THE FIRST STEP OF OIL SEPARATION IS PERFORMED BY A COMBINED AGGLOMERATOR/ DEMISTER. THE LOWER PART OF THE OIL SEPARATOR IS ALSO USED AS AN OIL RECEIVER. THE FINE SEPARATION OF THE AEROSOL-TYPE OIL PORTION FROM THE REFRIGERANT IS CARRIED OUT IN THE UPPER PART OF THE OIL SEPARATOR BY MEANS OF COALESCING CARTRIDGES. THE OIL SEPARATED IN THE FINE SECTION OF THE OIL SEPARATOR IS RETURNED TO THE COMPRESSORS SUCTION SIDE VIA AN ADDITIONAL INJECTION ORIFICE. TECHNICAL DATA MANUFACTURER: YORK SABROE DENMARK MANUFACTURING YEAR: 2002 COMPRESSOR TYPE: SAB 128 HF (DUOPACK) REFRIGERANT: R 22 COOLING CAPACITY: 2 X 379 KW ( 0 /+40C) SWEPT VOLUME: 2 X 454 M3/H ELECTRIC DRIVES (COMPRESSOR): 2 X 110 KW - 400/690 V 50HZ (ALSO SUITABLE FOR 60HZ) CONTROL SYSTEM: UNISAB III
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 1.070 €
Ubicación: Land-weight approx.: 2200 kg<br/>dimensions (l x w x h) approx.: 2460 x 1675 x 2100 mm<br/>description: agie charmilles roboform 200 edm (electrical discharge machine)<br> <br> travels x= 320 mm, y= 220 mm, z= 320 mm, c= 360², working surface 560 x 400 mm, usable surface 880 x 550 mm, max. travel distance x= 320 mm, y= 220 mm, z= 320 mm, c= 360², max. travel distance load 300 dan, incl. switch cabinet WEIGHT APPROX.: 2200 KG
DIMENSIONS (L X W X H) APPROX.: 2460 X 1675 X 2100 MM
DESCRIPTION: AGIE CHARMILLES ROBOFORM 200 EDM (ELECTRICAL DISCHARGE MACHINE)

TRAVELS X= 320 MM, Y= 220 MM, Z= 320 MM, C= 360², WORKING SURFACE 560 X 400 MM, USABLE SURFACE 880 X 550 MM, MAX. TRAVEL DISTANCE X= 320 MM, Y= 220 MM, Z= 320 MM, C= 360², MAX. TRAVEL DISTANCE LOAD 300 DAN, INCL. SWITCH CABINET
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 22.750 €
Ubicación: Land-complete bending machine for pvc window window profiles
-hot air version
-the heated length is 3 metres.
-like new hardly used

the witte hot air bending system profiles are in the form of profile drag moved and thus at the same time formed. the result is a precise arc quality without reverse curls.
fast setting for segmental by calculation of the radius by using a formula.
-comfortable "one-man operation"
-the patented witte bending system is suitable for round arches, arches and special sheets after template. 

by the well-insulated furnace, the bending machine works particularly energy-consciously. the construction of the heat air generator is designed so that no hot air can escape needless even when the heating chamber.
numerous bending templates are included in the scope of delivery.
(for veka profile)
....................................................................................
complete bending line for pvc windows profiles
-hot-air version
-the heatable usable length is 3 meters.
-hardly used as new

with the hot-air bending system witte, the profiles are drawn into the profiles drawing mould and formed at the same time. the result is exact sheet quality without corrugations.
fast setting for stitch curves by calculating the radius using a formula.
-convenient one - man operation
-the patented witte bending system is suitable for round ark as well as for segment arches and special ark according to template. 

due to the well insulated heating furnace, the bending machine works particularly energy-conscious. the design of the heating air generator is such that no hot air can escape unnecessarily even when the heating chamber is open.
a lot of profile forms are included. (for veka system)

COMPLETE BENDING MACHINE FOR PVC WINDOW WINDOW PROFILES -HOT AIR VERSION -THE HEATED LENGTH IS 3 METRES. -LIKE NEW HARDLY USED THE WITTE HOT AIR BENDING SYSTEM PROFILES ARE IN THE FORM OF PROFILE DRAG MOVED AND THUS AT THE SAME TIME FORMED. THE RESULT IS A PRECISE ARC QUALITY WITHOUT REVERSE CURLS. FAST SETTING FOR SEGMENTAL BY CALCULATION OF THE RADIUS BY USING A FORMULA. -COMFORTABLE "ONE-MAN OPERATION" -THE PATENTED WITTE BENDING SYSTEM IS SUITABLE FOR ROUND ARCHES, ARCHES AND SPECIAL SHEETS AFTER TEMPLATE. BY THE WELL-INSULATED FURNACE, THE BENDING MACHINE WORKS PARTICULARLY ENERGY-CONSCIOUSLY. THE CONSTRUCTION OF THE HEAT AIR GENERATOR IS DESIGNED SO THAT NO HOT AIR CAN ESCAPE NEEDLESS EVEN WHEN THE HEATING CHAMBER. NUMEROUS BENDING TEMPLATES ARE INCLUDED IN THE SCOPE OF DELIVERY. (FOR VEKA PROFILE) .................................................................................... COMPLETE BENDING LINE FOR PVC WINDOWS PROFILES -HOT-AIR VERSION -THE HEATABLE USABLE LENGTH IS 3 METERS. -HARDLY USED AS NEW WITH THE HOT-AIR BENDING SYSTEM WITTE, THE PROFILES ARE DRAWN INTO THE PROFILES DRAWING MOULD AND FORMED AT THE SAME TIME. THE RESULT IS EXACT SHEET QUALITY WITHOUT CORRUGATIONS. FAST SETTING FOR STITCH CURVES BY CALCULATING THE RADIUS USING A FORMULA. -CONVENIENT ONE - MAN OPERATION -THE PATENTED WITTE BENDING SYSTEM IS SUITABLE FOR ROUND ARK AS WELL AS FOR SEGMENT ARCHES AND SPECIAL ARK ACCORDING TO TEMPLATE. DUE TO THE WELL INSULATED HEATING FURNACE, THE BENDING MACHINE WORKS PARTICULARLY ENERGY-CONSCIOUS. THE DESIGN OF THE HEATING AIR GENERATOR IS SUCH THAT NO HOT AIR CAN ESCAPE UNNECESSARILY EVEN WHEN THE HEATING CHAMBER IS OPEN. A LOT OF PROFILE FORMS ARE INCLUDED. (FOR VEKA SYSTEM)
Vendedor: M. Hille Import & Export technischer Anlagen
Año de construcción: usado
Precio: used machinery auction RESALE 2.800 €
Ubicación: Land-weight approx.: 3500 kg<br/>workpiece height: 1000 mm<br/>max. temperature: 80 °<br/>dimensions (l x w x h) approx.: 15300 x 3500 x 3608 mm<br/>description: bvl oberflÄchentechnik rotocleaner rc 1600 rw 2 st cleaning machine<br> technical data - usable height : 1.000 mm - diagonal : 1.600 mm - load capacity at regular load distribution : 2.000 kg - operating voltage : 3 x 400 v, n+pe, 50 hz data of washing tank - content of washing tank : 2.000 l - heater of washing tank : 91 kw, electrical - pump : 30 kw - injection pressure washing : 7 bar data of rinsing tank - content of washing tank : 1.000 l - heater of washing tank : 39 kw, electrical - pump : 7,5 kw - injection pressure rinse : 4,5 bar operating hours approx. 4700 h!  the complete loading unit is a part of the cleaning machine. WEIGHT APPROX.: 3500 KG
WORKPIECE HEIGHT: 1000 MM
MAX. TEMPERATURE: 80 °
DIMENSIONS (L X W X H) APPROX.: 15300 X 3500 X 3608 MM
DESCRIPTION: BVL OBERFLÄCHENTECHNIK ROTOCLEANER RC 1600 RW 2 ST CLEANING MACHINE
TECHNICAL DATA - USABLE HEIGHT : 1.000 MM - DIAGONAL : 1.600 MM - LOAD CAPACITY AT REGULAR LOAD DISTRIBUTION : 2.000 KG - OPERATING VOLTAGE : 3 X 400 V, N+PE, 50 HZ DATA OF WASHING TANK - CONTENT OF WASHING TANK : 2.000 L - HEATER OF WASHING TANK : 91 KW, ELECTRICAL - PUMP : 30 KW - INJECTION PRESSURE WASHING : 7 BAR DATA OF RINSING TANK - CONTENT OF WASHING TANK : 1.000 L - HEATER OF WASHING TANK : 39 KW, ELECTRICAL - PUMP : 7,5 KW - INJECTION PRESSURE RINSE : 4,5 BAR OPERATING HOURS APPROX. 4700 H! THE COMPLETE LOADING UNIT IS A PART OF THE CLEANING MACHINE.
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 990 €
Ubicación: Land-kemper

welding gas extraction

wall mounting for two welding stations

technical data:

flow 1300 mâ³/h

motor output 1,5 kw

voltage 400 v weight ca 200 kg mounting dimensions (wxhxd) 1300 x 1700 x 900

length approx. 3 m of suction arms

incl. mounting material to the wall fixing further technical data please take the nameplate

a vat invoice is created for you.
 KEMPER WELDING GAS EXTRACTION WALL MOUNTING FOR TWO WELDING STATIONS TECHNICAL DATA: FLOW 1300 M&ACIRC;&SUP3;/H MOTOR OUTPUT 1,5 KW VOLTAGE 400 V WEIGHT CA 200 KG MOUNTING DIMENSIONS (WXHXD) 1300 X 1700 X 900 LENGTH APPROX. 3 M OF SUCTION ARMS INCL. MOUNTING MATERIAL TO THE WALL FIXING FURTHER TECHNICAL DATA PLEASE TAKE THE NAMEPLATE A VAT INVOICE IS CREATED FOR YOU.
Vendedor: Fa. Schönknecht
Año de construcción: usado
Ubicación: Land-turning diameter: max. 420 mm<br/>turning length: max. 630 mm<br/>control: turn-plus  heidenhain<br/>greates pass round over bed: 570 mm<br/>swing dia. over traverse guideway: 420 mm<br/>axis stroke::  <br/>x-travel: 220 mm<br/>y-axis: +/-40 mm<br/>z-travel: 635 mm<br/>main spindle::  <br/>turning speed range - main spindle: 25 - 5.000 min/-1<br/>power capacity - main spindel: 21 kw<br/>max. torque: 240 nm<br/>max. chucking diameter: 250 mm<br/>spindle nose: 170h5 <br/>spindle bearing diameter: 120 mm<br/>spindle bore: 79 mm<br/>max. bar capacity: 65 mm<br/>usable bar diameter: ( - ) mm<br/>c-axis: 0,04 °<br/>turret::  <br/>number of toolpositions: 12 pos.<br/>number of driven toolspositions: 6 pos.<br/>power capacity - driven tool-stations: 1,4 kw<br/>tool taper: 30mm  din 69880<br/>tailstock::  <br/>diameter of quill: 80 mm<br/>tailstock: 550 mm<br/>taper of center: mk 4 <br/>clamping capacity: 1,5 kn<br/>total power requirement: 35 kw<br/>weight of the machine ca.: 5,4 t<br/>dimensions of the machine ca.: 4,0 x 2,5 x 2,0 m<br/>documents:  <br/>chip conveyor:  <br/>coolantsystem:  <br/>tailstock:  <br/>parts catcher:  <br/>bar feeder interface:  <br/>hydraulic system:  <br/>c-axis:  <br/>y-axis:  <br/>tool drive mechanisum:  <br/>turret:  <br/>cnc-turning- and millingcenter<br/>gildemeister - ctx 400 e<br/><br/>- tool-drive<br/>- c-axis<br/>- y-axis<br/>- tailstock<br/>- without chuck / without tools<br/><br/><br/><br/><br/> TURNING DIAMETER: MAX. 420 MM
TURNING LENGTH: MAX. 630 MM
CONTROL: TURN-PLUS HEIDENHAIN
GREATES PASS ROUND OVER BED: 570 MM
SWING DIA. OVER TRAVERSE GUIDEWAY: 420 MM
AXIS STROKE::
X-TRAVEL: 220 MM
Y-AXIS: +/-40 MM
Z-TRAVEL: 635 MM
MAIN SPINDLE::
TURNING SPEED RANGE - MAIN SPINDLE: 25 - 5.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 21 KW
MAX. TORQUE: 240 NM
MAX. CHUCKING DIAMETER: 250 MM
SPINDLE NOSE: 170H5
SPINDLE BEARING DIAMETER: 120 MM
SPINDLE BORE: 79 MM
MAX. BAR CAPACITY: 65 MM
USABLE BAR DIAMETER: ( - ) MM
C-AXIS: 0,04 °
TURRET::
NUMBER OF TOOLPOSITIONS: 12 POS.
NUMBER OF DRIVEN TOOLSPOSITIONS: 6 POS.
POWER CAPACITY - DRIVEN TOOL-STATIONS: 1,4 KW
TOOL TAPER: 30MM DIN 69880
TAILSTOCK::
DIAMETER OF QUILL: 80 MM
TAILSTOCK: 550 MM
TAPER OF CENTER: MK 4
CLAMPING CAPACITY: 1,5 KN
TOTAL POWER REQUIREMENT: 35 KW
WEIGHT OF THE MACHINE CA.: 5,4 T
DIMENSIONS OF THE MACHINE CA.: 4,0 X 2,5 X 2,0 M
DOCUMENTS:
CHIP CONVEYOR:
COOLANTSYSTEM:
TAILSTOCK:
PARTS CATCHER:
BAR FEEDER INTERFACE:
HYDRAULIC SYSTEM:
C-AXIS:
Y-AXIS:
TOOL DRIVE MECHANISUM:
TURRET:
CNC-TURNING- AND MILLINGCENTER
GILDEMEISTER - CTX 400 E

- TOOL-DRIVE
- C-AXIS
- Y-AXIS
- TAILSTOCK
- WITHOUT CHUCK / WITHOUT TOOLS




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Precio: 6.200 €
Ubicación: Land-duration / alb ear power 30/35 mm thread cutting capacity max m24 (steigungsabhã¤ngig) hand-reversing switch for forward link. 
undervoltage, thermal overload protection, spindle mk 3 drilling depth 125 mm projection 280 mm column diameter of 110 mm-usable surface of the table [bxl] 420 x 340 mm speed display scale drilling depth indicator scale drill depth stop with fine adjustment 
table height with rack and pinion motor three-phase of 400 v pole changing bar 1,5/2 kw spindle speed continuously 125 - 2000 1/min mechanical feed in 3 levels of 0.10/0.16/0, 25 mm / rev. 

including drilling package consisting: taper mandrel, chuck, vice and t - groove set. 

warranty: 3 years delivery: immediately, free delivery loaded: free house including packaging

not the right machine? 
we do also other afloat products - ask for a quote! 

flott base partner *.
 DURATION / ALB EAR POWER 30/35 MM THREAD CUTTING CAPACITY MAX M24 (STEIGUNGSABH&ATILDE;&CURREN;NGIG) HAND-REVERSING SWITCH FOR FORWARD LINK. UNDERVOLTAGE, THERMAL OVERLOAD PROTECTION, SPINDLE MK 3 DRILLING DEPTH 125 MM PROJECTION 280 MM COLUMN DIAMETER OF 110 MM-USABLE SURFACE OF THE TABLE [BXL] 420 X 340 MM SPEED DISPLAY SCALE DRILLING DEPTH INDICATOR SCALE DRILL DEPTH STOP WITH FINE ADJUSTMENT TABLE HEIGHT WITH RACK AND PINION MOTOR THREE-PHASE OF 400 V POLE CHANGING BAR 1,5/2 KW SPINDLE SPEED CONTINUOUSLY 125 - 2000 1/MIN MECHANICAL FEED IN 3 LEVELS OF 0.10/0.16/0, 25 MM / REV. INCLUDING DRILLING PACKAGE CONSISTING: TAPER MANDREL, CHUCK, VICE AND T - GROOVE SET. WARRANTY: 3 YEARS DELIVERY: IMMEDIATELY, FREE DELIVERY LOADED: FREE HOUSE INCLUDING PACKAGING NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER *.
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Precio: used machinery auction RESALE 150 €
Ubicación: Land-weight approx.: 120 kg<br/>dimensions (l x w x h) approx.: 1000 x 1100 x 1800 mm<br/>description: inner area approx. 600 x 600 x 500 mm, foot pedal control unit, machine suitable for sand/water jet cleaning of dies used at the draw bank lot 12 WEIGHT APPROX.: 120 KG
DIMENSIONS (L X W X H) APPROX.: 1000 X 1100 X 1800 MM
DESCRIPTION: INNER AREA APPROX. 600 X 600 X 500 MM, FOOT PEDAL CONTROL UNIT, MACHINE SUITABLE FOR SAND/WATER JET CLEANING OF DIES USED AT THE DRAW BANK LOT 12
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 4.885 €
Ubicación: Land-duration / alb ear power 30/35 mm thread cutting capacity max m24 (steigungsabhã¤ngig) hand-reversing switch for forward link. 
undervoltage, thermal overload protection, spindle mk 3 drilling depth 180 mm throat depth 260 mm column diameter of 110 mm-usable table surface [bxl] 420 x 340 mm speed display scale drilling depth indicator scale drill depth stop with fine adjustment 
table height with rack and pinion motor three-phase of 400 v pole changing bar 1,5/2 kw spindle speed continuously 125-2000 1 / min including drilling package consisting: taper mandrel, chuck, vice and t - groove set. 

warranty: 3 years delivery: immediately, free delivery loaded: free house including packaging not the right machine? 
we do also other afloat products - ask for a quote! 

flott base partner *.
 DURATION / ALB EAR POWER 30/35 MM THREAD CUTTING CAPACITY MAX M24 (STEIGUNGSABH&ATILDE;&CURREN;NGIG) HAND-REVERSING SWITCH FOR FORWARD LINK. UNDERVOLTAGE, THERMAL OVERLOAD PROTECTION, SPINDLE MK 3 DRILLING DEPTH 180 MM THROAT DEPTH 260 MM COLUMN DIAMETER OF 110 MM-USABLE TABLE SURFACE [BXL] 420 X 340 MM SPEED DISPLAY SCALE DRILLING DEPTH INDICATOR SCALE DRILL DEPTH STOP WITH FINE ADJUSTMENT TABLE HEIGHT WITH RACK AND PINION MOTOR THREE-PHASE OF 400 V POLE CHANGING BAR 1,5/2 KW SPINDLE SPEED CONTINUOUSLY 125-2000 1 / MIN INCLUDING DRILLING PACKAGE CONSISTING: TAPER MANDREL, CHUCK, VICE AND T - GROOVE SET. WARRANTY: 3 YEARS DELIVERY: IMMEDIATELY, FREE DELIVERY LOADED: FREE HOUSE INCLUDING PACKAGING NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER *.
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Precio: 680 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-usable length 750 mm, sheet thickness max. 2 mm, machine weight 900 kg
de:
zweiwalzen-rundbiegemaschine, fabr. stölting, typ bu-u, bj. 1998, ser.-nr. m179, nutzlänge 750 mm, blechstärke max. 2 mm, maschinengewicht 900
  USABLE LENGTH 750 MM, SHEET THICKNESS MAX. 2 MM, MACHINE WEIGHT 900 KG DE: ZWEIWALZEN-RUNDBIEGEMASCHINE, FABR. STöLTING, TYP BU-U, BJ. 1998, SER.-NR. M179, NUTZLäNGE 750 MM, BLECHSTäRKE MAX. 2 MM, MASCHINENGEWICHT 900
Vendedor: Hilco
Año de construcción: usado
Ubicación: Land-tube:   <br />mantel:       <br /> TUBE:
MANTEL:
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Precio: 30.000 €
Ubicación: Land-cap. 250 t, travel 60 mm, follow-up time 160 ms, safety distance 256 mm, table size 1,350 x 800 mm
de:
zweiständer-hydraulikpresse, fabr. fritz müller, typ kez 250-13,5/5.1.1, bj. 1984, auftragsnr. 210007a110, presskraft 250 t, nachlaufweg 60 mm, nachlaufzeit 160 ms, sicherheitsabstand 256 mm, tischmaß 1.350 x 800
 CAP. 250 T, TRAVEL 60 MM, FOLLOW-UP TIME 160 MS, SAFETY DISTANCE 256 MM, TABLE SIZE 1,350 X 800 MM DE: ZWEISTäNDER-HYDRAULIKPRESSE, FABR. FRITZ MüLLER, TYP KEZ 250-13,5/5.1.1, BJ. 1984, AUFTRAGSNR. 210007A110, PRESSKRAFT 250 T, NACHLAUFWEG 60 MM, NACHLAUFZEIT 160 MS, SICHERHEITSABSTAND 256 MM, TISCHMAß 1.350 X 800
Vendedor: Hilco
Año de construcción: usado
Ubicación: Land-basic machine complete with:\r\n\r\n- with automatic feed\r\n- circular saw unit 2,2 kw (3 hp) with pneumatic\r\n  height adjustment\r\n- axial mechanical adjustment of the saw, adjustment field \r\n  stepless from 0 to 2 mm \r\n- high-precision double ball bearing slides for the\r\n  moving parts\r\n- pressure beam controlled by two lateral\r\n  pneumatic cylinders, equipped with torsion bar \r\n- plastic cable chain\r\n- connecting piece Ø 120 mm  \r\n- hm- saw blade Ø 180 mm  \r\n- lubrication unit with filter complete with gearbox\r\n  and pressure gauge on the air line\r\n- service tools\r\n- safety devices\r\n  \r\ntype: fila 31  \r\nusable cutting length             3.100 mm  \r\n  \r\ntype: fila 37  \r\nusable cutting length             3.700 mm  \r\n  \r\ntype: fila 43  \r\nusable cutting length             4.300 mm BASIC MACHINE COMPLETE WITH:\R\N\R\N- WITH AUTOMATIC FEED\R\N- CIRCULAR SAW UNIT 2,2 KW (3 HP) WITH PNEUMATIC\R\N HEIGHT ADJUSTMENT\R\N- AXIAL MECHANICAL ADJUSTMENT OF THE SAW, ADJUSTMENT FIELD \R\N STEPLESS FROM 0 TO 2 MM \R\N- HIGH-PRECISION DOUBLE BALL BEARING SLIDES FOR THE\R\N MOVING PARTS\R\N- PRESSURE BEAM CONTROLLED BY TWO LATERAL\R\N PNEUMATIC CYLINDERS, EQUIPPED WITH TORSION BAR \R\N- PLASTIC CABLE CHAIN\R\N- CONNECTING PIECE Ø 120 MM \R\N- HM- SAW BLADE Ø 180 MM \R\N- LUBRICATION UNIT WITH FILTER COMPLETE WITH GEARBOX\R\N AND PRESSURE GAUGE ON THE AIR LINE\R\N- SERVICE TOOLS\R\N- SAFETY DEVICES\R\N \R\NTYPE: FILA 31 \R\NUSABLE CUTTING LENGTH 3.100 MM \R\N \R\NTYPE: FILA 37 \R\NUSABLE CUTTING LENGTH 3.700 MM \R\N \R\NTYPE: FILA 43 \R\NUSABLE CUTTING LENGTH 4.300 MM
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-cnc-abkantpresse (5301), fabr. trumpf trumabend v130, type, bj. 1998, masch.-nr. 885413, fabr.-nr. f1014f, maschinengewicht, nennpresskraft 1,300 12,950 kg kn, hub max. 365 mm, betriebsdruck max. 340 bar, nachlaufzeit 57 ms, 91 mm sicherheitsabstand, anschlussleistung, arbeitsbreite 23.0 kva max. 3,000 mm, ausstattungsmerkmale: 6-achs-maschine, cnc-steuerung, biegehilfe, winkelsensorik, fabr. de borja, type da69, abgel. betriebsstd. 29,712
   CNC-ABKANTPRESSE (5301), FABR. TRUMPF TRUMABEND V130, TYPE, BJ. 1998, MASCH.-NR. 885413, FABR.-NR. F1014F, MASCHINENGEWICHT, NENNPRESSKRAFT 1,300 12,950 KG KN, HUB MAX. 365 MM, BETRIEBSDRUCK MAX. 340 BAR, NACHLAUFZEIT 57 MS, 91 MM SICHERHEITSABSTAND, ANSCHLUSSLEISTUNG, ARBEITSBREITE 23.0 KVA MAX. 3,000 MM, AUSSTATTUNGSMERKMALE: 6-ACHS-MASCHINE, CNC-STEUERUNG, BIEGEHILFE, WINKELSENSORIK, FABR. DE BORJA, TYPE DA69, ABGEL. BETRIEBSSTD. 29,712
Vendedor: Hilco
Año de construcción: usado
Ubicación: Land-new stack turnover machine\r\nbrand: formetal \r\ntype rt.180 pl\r\nnew machine\r\n\r\ntechnical data:\r\nusable width of roller conveyor: 1.000/1.200 mm\r\nlength of roller conveyor:  3.300 mm\r\n\r\nmin. stack height: 1.150 mm, max. stack pelhöhe: 1.600 mm\r\nmin. stack width: 300 mm\r\nmax. stack length: 3.000 mm\r\nmax. stack weight: 2.800 kg\r\n\r\nin- and outfeed roller conveyor\r\n- roller Ø 89 mm\r\n- distance between roller 190 mm\r\n\r\n- drive with fix rotation speed motor 10,5 m/min.\r\n- installed electrical power:  5,0 kw\r\n- pneumatical door opening system\r\n\r\nstack turner rt.180pl 1000\r\nmax. stack width: 1.000 mm\r\nworking height (for roller conveyor width 1.000 mm): 250 mm\r\n\r\nstack turner rt.180pl 1200\r\nmax. stack width: 1.200 mm\r\nworking height (for roller conveyor width 1.200 mm): 400 mm\r\n\r\n NEW STACK TURNOVER MACHINE\R\NBRAND: FORMETAL \R\NTYPE RT.180 PL\R\NNEW MACHINE\R\N\R\NTECHNICAL DATA:\R\NUSABLE WIDTH OF ROLLER CONVEYOR: 1.000/1.200 MM\R\NLENGTH OF ROLLER CONVEYOR: 3.300 MM\R\N\R\NMIN. STACK HEIGHT: 1.150 MM, MAX. STACK PELHöHE: 1.600 MM\R\NMIN. STACK WIDTH: 300 MM\R\NMAX. STACK LENGTH: 3.000 MM\R\NMAX. STACK WEIGHT: 2.800 KG\R\N\R\NIN- AND OUTFEED ROLLER CONVEYOR\R\N- ROLLER Ø 89 MM\R\N- DISTANCE BETWEEN ROLLER 190 MM\R\N\R\N- DRIVE WITH FIX ROTATION SPEED MOTOR 10,5 M/MIN.\R\N- INSTALLED ELECTRICAL POWER: 5,0 KW\R\N- PNEUMATICAL DOOR OPENING SYSTEM\R\N\R\NSTACK TURNER RT.180PL 1000\R\NMAX. STACK WIDTH: 1.000 MM\R\NWORKING HEIGHT (FOR ROLLER CONVEYOR WIDTH 1.000 MM): 250 MM\R\N\R\NSTACK TURNER RT.180PL 1200\R\NMAX. STACK WIDTH: 1.200 MM\R\NWORKING HEIGHT (FOR ROLLER CONVEYOR WIDTH 1.200 MM): 400 MM\R\N\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-year of constr.: 2015
hours of operation machine: 8.429 h (06.03.2019)
pressing force approx.: 360 kn
bending length approx.: 1020 mm
control: tasc 6000
working height approx.: 1150 mm
free stand round about: 932 mm
usable height approx.: 300 mm
space requirements: 1805 x 1330 x 2380 mm
approximate weight machine: 2,600 kg
total connected load approx.: 6 kva

standard equipment

bejyws0sqk
a time program: 6.510 h
press bar runtime: 1: 058 h
cycles press bar: 2.185.654 pcs.

machine
-stable machine frame for standing and seated operation
-deformation enhanced press bar
-highly dynamic, electro. direct drive (torque motor)
-inductive length measuring system with temperature compensation
-enclosure air conditioning
-ergonomic machine design

control
-trump integrated tasc 6000
-numeric workshop programming
-windows xpe, pentium m 1.1 ghz clock frequency
-1 gb ram memory
-15-inch touch screen
-network capable

security
-side hinged doors
-rear protection cover
-2-button foot switch, for standing and seated operation
-ce marking

advanced facilities
-trailing stop system 6 axes

ergonomics package
-comfort plate (front)
-comfort footrest
-2 shelf brackets
-2 document shelves
-lighting of workroom front (led)
-control unit swivel
-sitting and standing support

productivity plus package
-bendguard (with block-laser)
-graphic workshop programming
-automatic tool clamping

technical data subject to change - subject to prior sale
the operating hours for delivery of the machine may differ from the hours recorded in the offer YEAR OF CONSTR.: 2015 HOURS OF OPERATION MACHINE: 8.429 H (06.03.2019) PRESSING FORCE APPROX.: 360 KN BENDING LENGTH APPROX.: 1020 MM CONTROL: TASC 6000 WORKING HEIGHT APPROX.: 1150 MM FREE STAND ROUND ABOUT: 932 MM USABLE HEIGHT APPROX.: 300 MM SPACE REQUIREMENTS: 1805 X 1330 X 2380 MM APPROXIMATE WEIGHT MACHINE: 2,600 KG TOTAL CONNECTED LOAD APPROX.: 6 KVA STANDARD EQUIPMENT BEJYWS0SQK A TIME PROGRAM: 6.510 H PRESS BAR RUNTIME: 1: 058 H CYCLES PRESS BAR: 2.185.654 PCS. MACHINE -STABLE MACHINE FRAME FOR STANDING AND SEATED OPERATION -DEFORMATION ENHANCED PRESS BAR -HIGHLY DYNAMIC, ELECTRO. DIRECT DRIVE (TORQUE MOTOR) -INDUCTIVE LENGTH MEASURING SYSTEM WITH TEMPERATURE COMPENSATION -ENCLOSURE AIR CONDITIONING -ERGONOMIC MACHINE DESIGN CONTROL -TRUMP INTEGRATED TASC 6000 -NUMERIC WORKSHOP PROGRAMMING -WINDOWS XPE, PENTIUM M 1.1 GHZ CLOCK FREQUENCY -1 GB RAM MEMORY -15-INCH TOUCH SCREEN -NETWORK CAPABLE SECURITY -SIDE HINGED DOORS -REAR PROTECTION COVER -2-BUTTON FOOT SWITCH, FOR STANDING AND SEATED OPERATION -CE MARKING ADVANCED FACILITIES -TRAILING STOP SYSTEM 6 AXES ERGONOMICS PACKAGE -COMFORT PLATE (FRONT) -COMFORT FOOTREST -2 SHELF BRACKETS -2 DOCUMENT SHELVES -LIGHTING OF WORKROOM FRONT (LED) -CONTROL UNIT SWIVEL -SITTING AND STANDING SUPPORT PRODUCTIVITY PLUS PACKAGE -BENDGUARD (WITH BLOCK-LASER) -GRAPHIC WORKSHOP PROGRAMMING -AUTOMATIC TOOL CLAMPING TECHNICAL DATA SUBJECT TO CHANGE - SUBJECT TO PRIOR SALE THE OPERATING HOURS FOR DELIVERY OF THE MACHINE MAY DIFFER FROM THE HOURS RECORDED IN THE OFFER
Vendedor: mteg GmbH
Año de construcción: usado
Ubicación: Land-cleaning brush machine\r\nmake: omma\r\ntype: spx-1400\r\n\r\nworking from top and bottom\r\nwith cross running cleaning system\r\n\r\nusable work-piece width 1400 mm (or on request)\r\nworking height 905 mm\r\nmax. work piece thickness 150 mm\r\nmin. work piece length 300 mm\r\nspeed 5 ? 25 m/min.\r\nbrushing speed approx. 92 m/min.\r\noperating side: right\r\n\r\n\r\nsystem components\r\n\r\n- upper and lower cross-cleaning-system with driven belt, equipt with special nylon brushes\r\n\r\n- special cleaning system for smallest particles,\r\nwith adjustable sprayer and extra storage tank for the cleaning fluid\r\n\r\n- mechanical wiping of the brushes\r\n\r\n- separate drives for the brushing unit and the feed\r\n\r\n- driven in- and out-feed rollers, rubber coated\r\n\r\n- electronical speed control by frequency converter\r\n\r\n- work piece adjustment by handwheel and high pecision display\r\n\r\n- thickness control with auto stop\r\n\r\n- water protected control unit\r\n\r\n- independent electric cabinet\r\n\r\n- ce certified\r\n\r\n- electric consents and analogic signals (0-10v)\r\n  to match the speed with infeed/outfeed motorized\r\n  conveyors (if present)\r\n\r\n- electronic photocell in front of the machine,\r\n  to activate on/off switching when a piece is\r\n  passing through. CLEANING BRUSH MACHINE\R\NMAKE: OMMA\R\NTYPE: SPX-1400\R\N\R\NWORKING FROM TOP AND BOTTOM\R\NWITH CROSS RUNNING CLEANING SYSTEM\R\N\R\NUSABLE WORK-PIECE WIDTH 1400 MM (OR ON REQUEST)\R\NWORKING HEIGHT 905 MM\R\NMAX. WORK PIECE THICKNESS 150 MM\R\NMIN. WORK PIECE LENGTH 300 MM\R\NSPEED 5 ? 25 M/MIN.\R\NBRUSHING SPEED APPROX. 92 M/MIN.\R\NOPERATING SIDE: RIGHT\R\N\R\N\R\NSYSTEM COMPONENTS\R\N\R\N- UPPER AND LOWER CROSS-CLEANING-SYSTEM WITH DRIVEN BELT, EQUIPT WITH SPECIAL NYLON BRUSHES\R\N\R\N- SPECIAL CLEANING SYSTEM FOR SMALLEST PARTICLES,\R\NWITH ADJUSTABLE SPRAYER AND EXTRA STORAGE TANK FOR THE CLEANING FLUID\R\N\R\N- MECHANICAL WIPING OF THE BRUSHES\R\N\R\N- SEPARATE DRIVES FOR THE BRUSHING UNIT AND THE FEED\R\N\R\N- DRIVEN IN- AND OUT-FEED ROLLERS, RUBBER COATED\R\N\R\N- ELECTRONICAL SPEED CONTROL BY FREQUENCY CONVERTER\R\N\R\N- WORK PIECE ADJUSTMENT BY HANDWHEEL AND HIGH PECISION DISPLAY\R\N\R\N- THICKNESS CONTROL WITH AUTO STOP\R\N\R\N- WATER PROTECTED CONTROL UNIT\R\N\R\N- INDEPENDENT ELECTRIC CABINET\R\N\R\N- CE CERTIFIED\R\N\R\N- ELECTRIC CONSENTS AND ANALOGIC SIGNALS (0-10V)\R\N TO MATCH THE SPEED WITH INFEED/OUTFEED MOTORIZED\R\N CONVEYORS (IF PRESENT)\R\N\R\N- ELECTRONIC PHOTOCELL IN FRONT OF THE MACHINE,\R\N TO ACTIVATE ON/OFF SWITCHING WHEN A PIECE IS\R\N PASSING THROUGH.
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-year 2011/07
table-piece door
usable mm.70x550
height ground mm.850
load force kg.1500
working dimensions - linear axes
x axis stroke - longitudinal 600 mm
y axis - cross mm.420
z axis stroke - vertical mm.370
work bath
nn.950x740x450 internal dimensions
containment capacity l.330
dielectric level mm.150 - 400
external dielectric bath
total dielectric requested l.560
electrode
max weight kg.50
distance between floor boards and door mm.200 electrode - 570
change electrode shuttle (linear)
max mm.75x75 footprint
maximum electrode length mm.200
max electrode weight 3kg
atc r 3 to 6 positions
axis r 2000 rev / min.
machine dimensions lxpx - 1852x2825x2570 mm
machine weight kg.5350
total installed power 10 kva YEAR 2011/07 TABLE-PIECE DOOR USABLE MM.70X550 HEIGHT GROUND MM.850 LOAD FORCE KG.1500 WORKING DIMENSIONS - LINEAR AXES X AXIS STROKE - LONGITUDINAL 600 MM Y AXIS - CROSS MM.420 Z AXIS STROKE - VERTICAL MM.370 WORK BATH NN.950X740X450 INTERNAL DIMENSIONS CONTAINMENT CAPACITY L.330 DIELECTRIC LEVEL MM.150 - 400 EXTERNAL DIELECTRIC BATH TOTAL DIELECTRIC REQUESTED L.560 ELECTRODE MAX WEIGHT KG.50 DISTANCE BETWEEN FLOOR BOARDS AND DOOR MM.200 ELECTRODE - 570 CHANGE ELECTRODE SHUTTLE (LINEAR) MAX MM.75X75 FOOTPRINT MAXIMUM ELECTRODE LENGTH MM.200 MAX ELECTRODE WEIGHT 3KG ATC R 3 TO 6 POSITIONS AXIS R 2000 REV / MIN. MACHINE DIMENSIONS LXPX - 1852X2825X2570 MM MACHINE WEIGHT KG.5350 TOTAL INSTALLED POWER 10 KVA
Vendedor: Industrialbay
Año de construcción: usado
Ubicación: Land-basic machine complete with:\r\n- circular saw unit 2,2 kw (3 hp) with pneumatic\r\n  height adjustment\r\n- axial mechanical adjustment of the saw, adjustment field \r\n  stepless from 0 to 2 mm \r\n- high-precision double ball bearing slides for the\r\n  moving parts\r\n- pressure beam controlled by two lateral\r\n  pneumatic cylinders, equipped with torsion bar \r\n- plastic cable chain\r\n- connecting piece Ø 120 mm  \r\n- hm- saw blade Ø 180 mm  \r\n- lubrication unit with filter complete with gearbox\r\n  and pressure gauge on the air line\r\n- service tools\r\n- safety devices\r\n  \r\ntype: fila 31  \r\nusable cutting length             3.100 mm  \r\n  \r\ntype: fila 37  \r\nusable cutting length             3.700 mm  \r\n  \r\ntype: fila 43  \r\nusable cutting length             4.300 mm BASIC MACHINE COMPLETE WITH:\R\N- CIRCULAR SAW UNIT 2,2 KW (3 HP) WITH PNEUMATIC\R\N HEIGHT ADJUSTMENT\R\N- AXIAL MECHANICAL ADJUSTMENT OF THE SAW, ADJUSTMENT FIELD \R\N STEPLESS FROM 0 TO 2 MM \R\N- HIGH-PRECISION DOUBLE BALL BEARING SLIDES FOR THE\R\N MOVING PARTS\R\N- PRESSURE BEAM CONTROLLED BY TWO LATERAL\R\N PNEUMATIC CYLINDERS, EQUIPPED WITH TORSION BAR \R\N- PLASTIC CABLE CHAIN\R\N- CONNECTING PIECE Ø 120 MM \R\N- HM- SAW BLADE Ø 180 MM \R\N- LUBRICATION UNIT WITH FILTER COMPLETE WITH GEARBOX\R\N AND PRESSURE GAUGE ON THE AIR LINE\R\N- SERVICE TOOLS\R\N- SAFETY DEVICES\R\N \R\NTYPE: FILA 31 \R\NUSABLE CUTTING LENGTH 3.100 MM \R\N \R\NTYPE: FILA 37 \R\NUSABLE CUTTING LENGTH 3.700 MM \R\N \R\NTYPE: FILA 43 \R\NUSABLE CUTTING LENGTH 4.300 MM
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 6.500 €
Ubicación: Land-rubber band machine drum diameter: 520 mm drum width: 650 mm maximum load weight: 130 kg maximum volume: 52 dm â³ electric motor: 4 kw electric total power: 8 kw filter unit of ragi  RUBBER BAND MACHINE DRUM DIAMETER: 520 MM DRUM WIDTH: 650 MM MAXIMUM LOAD WEIGHT: 130 KG MAXIMUM VOLUME: 52 DM &ACIRC;&SUP3; ELECTRIC MOTOR: 4 KW ELECTRIC TOTAL POWER: 8 KW FILTER UNIT OF RAGI
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Ubicación: Land-turning diameter: max. 455 mm<br/>turning length: 1.000 mm<br/>control: cnc it  heidenhain<br/>greates pass round over bed: 680 mm<br/>swing dia. over traverse guideway: 455 mm<br/>standard turning dia.: 315 mm<br/>x-travel: 320 mm<br/>z-travel: 1.097 mm<br/>main spindle::  <br/>turning speed range - main spindle: 18 - 3.600 min/-1<br/>power capacity - main spindel: 23 kw<br/>max. torque: 650 nm<br/>chucking diameter: 315 - max. 400 mm<br/>spindle diameter in front bearing: 140 mm<br/>spindle bore: 107 mm<br/>usable bar diameter: 91 mm<br/>c-axis: 0,025 °<br/>turret::  <br/>number of toolpositions: 12 pos.<br/>driven statition: 6 pos.<br/>tool taper: vdi 40 <br/>clamping diameter: max. 16 mm<br/>spindle speed - driven tools: max. 4.000 min -1<br/>power capacity - driven tools: 9,7 kw<br/>y-axis: 100 (+/- 50) mm<br/>tailstock::  <br/>diameter of quill: 120 mm<br/>quill stroke: 120 mm<br/>capture: mk 5 <br/>pressure center sleeve: 14.000 n<br/>feeds::  <br/>rapid traverse: x: 24 / z: 30 m/min<br/>feed force: x: 8 / z: 15 kn<br/>total power requirement: 58 kva<br/>weight of the machine ca.: 10,0 t<br/>dimensions of the machine ca.: 6,0 x 3,0 x 2,3 m<br/>documents:  <br/>chip conveyor:  <br/>coolantsystem:  <br/>tailstock:  <br/>c-axis:  <br/>hydraulic system:  <br/>y-axis:  <br/>turret:  <br/>tool drive mechanisum:  <br/>tool setter:  <br/>hollow chuck unit: 92,5mm <br/>cnc - turning- and millingcenter<br/>gildemeister - ctx 500 e / 1000 v4<br/><br/>- c-axis<br/>- y-axis<br/>- tool-drive<br/>- without tools<br/><br/><br/><br/><br/> TURNING DIAMETER: MAX. 455 MM
TURNING LENGTH: 1.000 MM
CONTROL: CNC IT HEIDENHAIN
GREATES PASS ROUND OVER BED: 680 MM
SWING DIA. OVER TRAVERSE GUIDEWAY: 455 MM
STANDARD TURNING DIA.: 315 MM
X-TRAVEL: 320 MM
Z-TRAVEL: 1.097 MM
MAIN SPINDLE::
TURNING SPEED RANGE - MAIN SPINDLE: 18 - 3.600 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 23 KW
MAX. TORQUE: 650 NM
CHUCKING DIAMETER: 315 - MAX. 400 MM
SPINDLE DIAMETER IN FRONT BEARING: 140 MM
SPINDLE BORE: 107 MM
USABLE BAR DIAMETER: 91 MM
C-AXIS: 0,025 °
TURRET::
NUMBER OF TOOLPOSITIONS: 12 POS.
DRIVEN STATITION: 6 POS.
TOOL TAPER: VDI 40
CLAMPING DIAMETER: MAX. 16 MM
SPINDLE SPEED - DRIVEN TOOLS: MAX. 4.000 MIN -1
POWER CAPACITY - DRIVEN TOOLS: 9,7 KW
Y-AXIS: 100 (+/- 50) MM
TAILSTOCK::
DIAMETER OF QUILL: 120 MM
QUILL STROKE: 120 MM
CAPTURE: MK 5
PRESSURE CENTER SLEEVE: 14.000 N
FEEDS::
RAPID TRAVERSE: X: 24 / Z: 30 M/MIN
FEED FORCE: X: 8 / Z: 15 KN
TOTAL POWER REQUIREMENT: 58 KVA
WEIGHT OF THE MACHINE CA.: 10,0 T
DIMENSIONS OF THE MACHINE CA.: 6,0 X 3,0 X 2,3 M
DOCUMENTS:
CHIP CONVEYOR:
COOLANTSYSTEM:
TAILSTOCK:
C-AXIS:
HYDRAULIC SYSTEM:
Y-AXIS:
TURRET:
TOOL DRIVE MECHANISUM:
TOOL SETTER:
HOLLOW CHUCK UNIT: 92,5MM
CNC - TURNING- AND MILLINGCENTER
GILDEMEISTER - CTX 500 E / 1000 V4

- C-AXIS
- Y-AXIS
- TOOL-DRIVE
- WITHOUT TOOLS




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-double power bag with grip hole reinforcement
equipped with:
usable welding and cutting width: 850 mm
bag width (feed length): 220-600 mm
bag height: 280-600 mm
number of lanes 1
maximum number of cycles (cycles / min) 70 cycles / minute
max unwind width 1200 mm
max unwinding diameter 1100 mm
servo
edge guide
photo cell
including - nordson gluing plant of 2002
 DOUBLE POWER BAG WITH GRIP HOLE REINFORCEMENT EQUIPPED WITH: USABLE WELDING AND CUTTING WIDTH: 850 MM BAG WIDTH (FEED LENGTH): 220-600 MM BAG HEIGHT: 280-600 MM NUMBER OF LANES 1 MAXIMUM NUMBER OF CYCLES (CYCLES / MIN) 70 CYCLES / MINUTE MAX UNWIND WIDTH 1200 MM MAX UNWINDING DIAMETER 1100 MM SERVO EDGE GUIDE PHOTO CELL INCLUDING - NORDSON GLUING PLANT OF 2002
Vendedor: Serin Graphische Maschinen
Año de construcción: usado
Precio: used machinery auction RESALE 8.200 €
Ubicación: Land-weight approx.: 12000 kg<br/>dimensions (l x w x h) approx.: 30000 x 4000 x 4300 mm<br/>description: composition: machine for loading and opening cardboard boxes comarme f-2000 (1998), roller conveyor for manual loading of the boxes, length 5000 mm, width 300 mm, scale unit and control box tesab ts300 (1998) capacity 25 kg, with sensors for waste , machine for closing the boxes comemn gem-f45 (1998), labeller al tech vb code (1998), palletizing system mariani pmt (1998), pallet packing machine spiropack r-125 / a (1998), see photos for technical data WEIGHT APPROX.: 12000 KG
DIMENSIONS (L X W X H) APPROX.: 30000 X 4000 X 4300 MM
DESCRIPTION: COMPOSITION: MACHINE FOR LOADING AND OPENING CARDBOARD BOXES COMARME F-2000 (1998), ROLLER CONVEYOR FOR MANUAL LOADING OF THE BOXES, LENGTH 5000 MM, WIDTH 300 MM, SCALE UNIT AND CONTROL BOX TESAB TS300 (1998) CAPACITY 25 KG, WITH SENSORS FOR WASTE , MACHINE FOR CLOSING THE BOXES COMEMN GEM-F45 (1998), LABELLER AL TECH VB CODE (1998), PALLETIZING SYSTEM MARIANI PMT (1998), PALLET PACKING MACHINE SPIROPACK R-125 / A (1998), SEE PHOTOS FOR TECHNICAL DATA
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-electronically controlled milling and edges in glue, rework and drilling centre to the commission-wise production of furniture parts,
solid wood or similar materials.
prepared for einwechselbares gluing unit.

base machine:
-bed stable heavy-duty compact linear guide system. preloaded gear rack drives and digital ac servo motors in the x - and y-axes
-unit carrier with linear guiding system,
ball screw and digital ac servo motor to the position of the z axis,
travel 535 mm
 
clamping table at baz211/40/k
-clamping table integrated into the machine bed
  a rigid steel construction with
  linear guides in the longitudinal direction to the
  adjustment of the clamping brackets

power control - control:
  
basic equipment:
-remote diagnostics via modem
  billing according a separate remote service contract
  if completed (not included)
-at baz211/40 + 52
  1 water ring vacuum pump with 100 m3/h
  (corresponds to power a 140 m3/h rotary vane vacuum pump) for clamping system
-pneumatic connection r 1/2 inch, 7 bar
-maximum speed:
-60 m/min in x - and y-direction
-30 m/min in z-direction

technical data:
-workpiece length
maximum 4000 mm for single occupancy
1375 mm pendant occupancy
1550 mm pendant occupancy for milling
with water meters diameter. 25 mm
-width of the work piece stop front: (operating side)
-max 1220 mm for milling tool
  diameter 25 mm
-max 1220 mm with glue
-1150 mm max for all units
-width of the work piece stop rear:
  (auxiliary fence table back)
-1350 mm for machining with tool
  diameter 25 mm
-max 1250 mm with glue
-max 1220 mm for all units
-workpiece thickness
-60 mm with standard clamp in use
  gluing unit
-max 300 mm incl. clamping device in use
  as a router
-up to 60 mm with standard clamp without
  constraint for aggregates and extraction
-in the radius milling min. 16 mm or
  2 x radius + 10 mm
-the specified dimensions are not the maximum possible editing values
  to equate per unit â?? see separate
  tables
-minimum size of the workpiece depending on:
  clamping devices, workpiece surface and contour
-working height bottom workpiece 950 mm
-soil conditions must comply with the foundation plan

7.5 kw liquid-cooled main spindle
-for hsk f63 - din 69893
  
spindle return stroke
-allows the use of the drill head with
  form milling tool in the main spindle
-tool length incl. sleeve
  up to 150 mm
  
c-axis with units - electronic interface
-for mounting of the machining and gluing aggregates with integrated pneumatic electrical electronics supply and actuator programming for cnc drawing

laser positioning aid for vacuum clamp

id: 7313 1 times
extra connectors for clamping devices

id: 7011 1 times
sicherheitsabschrankung side panel left + right

id: 7325 1 times
shuttle machining bxxx/30 /...

id: 7301 2 piece
lateral and longitudinal stop bolt

note
as the auxiliary stops right rear

id: 7207 6 pieces
stroke rail for console table b200

note:
to console 1 to 3 and 5 to 7

number: 1 times
extension boom b200
allows you to edit the width of a workpiece
in attack, rear
-1730 mm max for milling tool diameter 25 mm
-max 1600 mm for all units

id: 7450 1 piece
plate changer 18 x instead of 12 x optimat

id: 7403 1 piece
drill head instead of 17 spindles 12 spindles

id: 7515 1 piece
saw / drill unit swiveling f.wz changer
-unlimited swiveling about c-axis

id: 7547 1 piece
corner notching unit for wz changer
unlimited swiveling on c-axis.

id: 7523 1 piece
drilling / milling unit 4-spindle f. wz-changer
unlimited swiveling on c-axis.

id: 7565 1 piece
blow-off nozzle for wz changer by the edge of the workpiece

id: 7617 1 piece
gluing unit 360-degree optimat

id: 7607 1 piece
heiã?luftdã?se for gluing unit 360 degrees

number: 7633 1 piece
7703 before crosscutting station and 1 x roll number: 1 piece
combi-buendigfraes - after cleaning unit f. wz-w.

id: 7721 2 piece
wpl - radius cutter head

id: 7877 7 times
led position display system console 1300-1600 mm ELECTRONICALLY CONTROLLED MILLING AND EDGES IN GLUE, REWORK AND DRILLING CENTRE TO THE COMMISSION-WISE PRODUCTION OF FURNITURE PARTS, SOLID WOOD OR SIMILAR MATERIALS. PREPARED FOR EINWECHSELBARES GLUING UNIT. BASE MACHINE: -BED STABLE HEAVY-DUTY COMPACT LINEAR GUIDE SYSTEM. PRELOADED GEAR RACK DRIVES AND DIGITAL AC SERVO MOTORS IN THE X - AND Y-AXES -UNIT CARRIER WITH LINEAR GUIDING SYSTEM, BALL SCREW AND DIGITAL AC SERVO MOTOR TO THE POSITION OF THE Z AXIS, TRAVEL 535 MM CLAMPING TABLE AT BAZ211/40/K -CLAMPING TABLE INTEGRATED INTO THE MACHINE BED A RIGID STEEL CONSTRUCTION WITH LINEAR GUIDES IN THE LONGITUDINAL DIRECTION TO THE ADJUSTMENT OF THE CLAMPING BRACKETS POWER CONTROL - CONTROL: BASIC EQUIPMENT: -REMOTE DIAGNOSTICS VIA MODEM BILLING ACCORDING A SEPARATE REMOTE SERVICE CONTRACT IF COMPLETED (NOT INCLUDED) -AT BAZ211/40 + 52 1 WATER RING VACUUM PUMP WITH 100 M3/H (CORRESPONDS TO POWER A 140 M3/H ROTARY VANE VACUUM PUMP) FOR CLAMPING SYSTEM -PNEUMATIC CONNECTION R 1/2 INCH, 7 BAR -MAXIMUM SPEED: -60 M/MIN IN X - AND Y-DIRECTION -30 M/MIN IN Z-DIRECTION TECHNICAL DATA: -WORKPIECE LENGTH MAXIMUM 4000 MM FOR SINGLE OCCUPANCY 1375 MM PENDANT OCCUPANCY 1550 MM PENDANT OCCUPANCY FOR MILLING WITH WATER METERS DIAMETER. 25 MM -WIDTH OF THE WORK PIECE STOP FRONT: (OPERATING SIDE) -MAX 1220 MM FOR MILLING TOOL DIAMETER 25 MM -MAX 1220 MM WITH GLUE -1150 MM MAX FOR ALL UNITS -WIDTH OF THE WORK PIECE STOP REAR: (AUXILIARY FENCE TABLE BACK) -1350 MM FOR MACHINING WITH TOOL DIAMETER 25 MM -MAX 1250 MM WITH GLUE -MAX 1220 MM FOR ALL UNITS -WORKPIECE THICKNESS -60 MM WITH STANDARD CLAMP IN USE GLUING UNIT -MAX 300 MM INCL. CLAMPING DEVICE IN USE AS A ROUTER -UP TO 60 MM WITH STANDARD CLAMP WITHOUT CONSTRAINT FOR AGGREGATES AND EXTRACTION -IN THE RADIUS MILLING MIN. 16 MM OR 2 X RADIUS + 10 MM -THE SPECIFIED DIMENSIONS ARE NOT THE MAXIMUM POSSIBLE EDITING VALUES TO EQUATE PER UNIT &ACIRC;?? SEE SEPARATE TABLES -MINIMUM SIZE OF THE WORKPIECE DEPENDING ON: CLAMPING DEVICES, WORKPIECE SURFACE AND CONTOUR -WORKING HEIGHT BOTTOM WORKPIECE 950 MM -SOIL CONDITIONS MUST COMPLY WITH THE FOUNDATION PLAN 7.5 KW LIQUID-COOLED MAIN SPINDLE -FOR HSK F63 - DIN 69893 SPINDLE RETURN STROKE -ALLOWS THE USE OF THE DRILL HEAD WITH FORM MILLING TOOL IN THE MAIN SPINDLE -TOOL LENGTH INCL. SLEEVE UP TO 150 MM C-AXIS WITH UNITS - ELECTRONIC INTERFACE -FOR MOUNTING OF THE MACHINING AND GLUING AGGREGATES WITH INTEGRATED PNEUMATIC ELECTRICAL ELECTRONICS SUPPLY AND ACTUATOR PROGRAMMING FOR CNC DRAWING LASER POSITIONING AID FOR VACUUM CLAMP ID: 7313 1 TIMES EXTRA CONNECTORS FOR CLAMPING DEVICES ID: 7011 1 TIMES SICHERHEITSABSCHRANKUNG SIDE PANEL LEFT + RIGHT ID: 7325 1 TIMES SHUTTLE MACHINING BXXX/30 /... ID: 7301 2 PIECE LATERAL AND LONGITUDINAL STOP BOLT NOTE AS THE AUXILIARY STOPS RIGHT REAR ID: 7207 6 PIECES STROKE RAIL FOR CONSOLE TABLE B200 NOTE: TO CONSOLE 1 TO 3 AND 5 TO 7 NUMBER: 1 TIMES EXTENSION BOOM B200 ALLOWS YOU TO EDIT THE WIDTH OF A WORKPIECE IN ATTACK, REAR -1730 MM MAX FOR MILLING TOOL DIAMETER 25 MM -MAX 1600 MM FOR ALL UNITS ID: 7450 1 PIECE PLATE CHANGER 18 X INSTEAD OF 12 X OPTIMAT ID: 7403 1 PIECE DRILL HEAD INSTEAD OF 17 SPINDLES 12 SPINDLES ID: 7515 1 PIECE SAW / DRILL UNIT SWIVELING F.WZ CHANGER -UNLIMITED SWIVELING ABOUT C-AXIS ID: 7547 1 PIECE CORNER NOTCHING UNIT FOR WZ CHANGER UNLIMITED SWIVELING ON C-AXIS. ID: 7523 1 PIECE DRILLING / MILLING UNIT 4-SPINDLE F. WZ-CHANGER UNLIMITED SWIVELING ON C-AXIS. ID: 7565 1 PIECE BLOW-OFF NOZZLE FOR WZ CHANGER BY THE EDGE OF THE WORKPIECE ID: 7617 1 PIECE GLUING UNIT 360-DEGREE OPTIMAT ID: 7607 1 PIECE HEI&ATILDE;?LUFTD&ATILDE;?SE FOR GLUING UNIT 360 DEGREES NUMBER: 7633 1 PIECE 7703 BEFORE CROSSCUTTING STATION AND 1 X ROLL NUMBER: 1 PIECE COMBI-BUENDIGFRAES - AFTER CLEANING UNIT F. WZ-W. ID: 7721 2 PIECE WPL - RADIUS CUTTER HEAD ID: 7877 7 TIMES LED POSITION DISPLAY SYSTEM CONSOLE 1300-1600 MM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 350 €
Ubicación: Land-dimensions (l x w x h) approx.: 900 x 900 x 1700 mm<br/>description: serial number fvg 2002/750-2329, usable frame size 745 x 500 x 450 mm, connected load 230 v/275 w, pressure 0 to 10 bar, including various accessories and foot pedal DIMENSIONS (L X W X H) APPROX.: 900 X 900 X 1700 MM
DESCRIPTION: SERIAL NUMBER FVG 2002/750-2329, USABLE FRAME SIZE 745 X 500 X 450 MM, CONNECTED LOAD 230 V/275 W, PRESSURE 0 TO 10 BAR, INCLUDING VARIOUS ACCESSORIES AND FOOT PEDAL
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 19.500 €
Ubicación: Land-semi trailers tautliners coilmulde edscha kögel cargo sn 24 (396)
koegel-sn24-39601. jpg
category: trailers & trailer
net price: â?¬21000
kögel sn24-39601. jpgkoegel-sn24-39602.jpgkoegel-sn24-39603.jpgkoegel-sn24-39604.jpgkoegel-sn24-39605.jpgkoegel-sn24-39606.jpgkoegel-sn24-39607.jpgkoegel-sn24-39608.jpgkoegel-sn24-39609.jpgkoegel-sn24-39610.jpg
int: 396

tautliner coilmulden-longer trailers in top condition:

manufacturer kögel
type sn 24 (s24-1)
initial registration 03 / 2017
hu 05 / 2019, sp 11 / 2019
almost like new condition
tyres: lift axle 50%, central axis 80%, rear axle 60%
plane and portal door labeled

gvw (d) 36,000 kg (technically possible 42,000 kg)
unladen weight 7.710 kg
payload 28.290 kg

coil-dump, length 7.2 m according to vdi guideline 2700 for coil diameters of 900 to 2,100 mm
tautliner / curtainsiders (schiebegardinen-plane on both sides)
edscha-sliding hood (for crane shipments)
laderaummaÃ?e l x w x h in meters: 13,62 x 2.49 x 2.72

pallet stop rails with variofix hole pattern, left and right
13 zurr-eyelets on each side
3 pairs slider settings
ccra portal doors lock
floor 30 mm plywood, passable stacker axle load 7,200 kg
slide hood by versus, forwards and backwards to open
pallet box made of sheet for 30 euro pallets
rear right and left plastic tool box
document tray on the front of the face
fire extinguisher box
axis luftgeferdert lowering apparatus with lifting
first axle lifting

saf-intradisc-axles with 430 mm disc brakes, abs and elf and stability program
tyres: 385 / 65 r 22.5, fulda ecotonn  SEMI TRAILERS TAUTLINERS COILMULDE EDSCHA KöGEL CARGO SN 24 (396) KOEGEL-SN24-39601. JPG CATEGORY: TRAILERS & TRAILER NET PRICE: �21000 KöGEL SN24-39601. JPGKOEGEL-SN24-39602.JPGKOEGEL-SN24-39603.JPGKOEGEL-SN24-39604.JPGKOEGEL-SN24-39605.JPGKOEGEL-SN24-39606.JPGKOEGEL-SN24-39607.JPGKOEGEL-SN24-39608.JPGKOEGEL-SN24-39609.JPGKOEGEL-SN24-39610.JPG INT: 396 TAUTLINER COILMULDEN-LONGER TRAILERS IN TOP CONDITION: MANUFACTURER KöGEL TYPE SN 24 (S24-1) INITIAL REGISTRATION 03 / 2017 HU 05 / 2019, SP 11 / 2019 ALMOST LIKE NEW CONDITION TYRES: LIFT AXLE 50%, CENTRAL AXIS 80%, REAR AXLE 60% PLANE AND PORTAL DOOR LABELED GVW (D) 36,000 KG (TECHNICALLY POSSIBLE 42,000 KG) UNLADEN WEIGHT 7.710 KG PAYLOAD 28.290 KG COIL-DUMP, LENGTH 7.2 M ACCORDING TO VDI GUIDELINE 2700 FOR COIL DIAMETERS OF 900 TO 2,100 MM TAUTLINER / CURTAINSIDERS (SCHIEBEGARDINEN-PLANE ON BOTH SIDES) EDSCHA-SLIDING HOOD (FOR CRANE SHIPMENTS) LADERAUMMA�E L X W X H IN METERS: 13,62 X 2.49 X 2.72 PALLET STOP RAILS WITH VARIOFIX HOLE PATTERN, LEFT AND RIGHT 13 ZURR-EYELETS ON EACH SIDE 3 PAIRS SLIDER SETTINGS CCRA PORTAL DOORS LOCK FLOOR 30 MM PLYWOOD, PASSABLE STACKER AXLE LOAD 7,200 KG SLIDE HOOD BY VERSUS, FORWARDS AND BACKWARDS TO OPEN PALLET BOX MADE OF SHEET FOR 30 EURO PALLETS REAR RIGHT AND LEFT PLASTIC TOOL BOX DOCUMENT TRAY ON THE FRONT OF THE FACE FIRE EXTINGUISHER BOX AXIS LUFTGEFERDERT LOWERING APPARATUS WITH LIFTING FIRST AXLE LIFTING SAF-INTRADISC-AXLES WITH 430 MM DISC BRAKES, ABS AND ELF AND STABILITY PROGRAM TYRES: 385 / 65 R 22.5, FULDA ECOTONN
Vendedor: Umrath Handel & Verwertung
Año de construcción: usado
Precio: used machinery auction RESALE 350 €
Ubicación: Land-dimensions (l x w x h) approx.: 900 x 900 x 1700 mm<br/>description: serial number fvg 89/750-676, usable frame size 745 x 500 x 450 mm, connected load 220 v/ 275 w, air pressure 0 to 10 bar, including various accessories and foot pedal, including 1 jet pressure regulator micro peen 200 DIMENSIONS (L X W X H) APPROX.: 900 X 900 X 1700 MM
DESCRIPTION: SERIAL NUMBER FVG 89/750-676, USABLE FRAME SIZE 745 X 500 X 450 MM, CONNECTED LOAD 220 V/ 275 W, AIR PRESSURE 0 TO 10 BAR, INCLUDING VARIOUS ACCESSORIES AND FOOT PEDAL, INCLUDING 1 JET PRESSURE REGULATOR MICRO PEEN 200
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-technical data:
working width 630 mm
dimensions of machine table 640 x 1000 mm
working height min/max.		3.5 / 300 mm
maximum chip thickness 8 mm
minimum length of workpiece 260 mm
minimum workpiece width 10 mm
drum speed 4500 u/min
shaft diameter 120 mm
4 knives 35 x 3 x 640 mm
speed 5-8-12-18 m / min.
dust nozzle diameter 150 mm

basic equipment:
-motorized table hub with 2 speeds and micrometric adjustment
-tenth accurate digital display for working height
-machine table with 4 steel screws height adjustment
-1 ribbed feed roller steel
-1 rubber-sheathed excerpt reel steel
-interchangeable feed rollers
-7kw 50 hz motor performance, 7 kw 50 hz
-manual star-delta switch
-protection feature in the input and output
-emergency off switch on front of the machine
-emergency off switch on back of the machine
-safety microswitch on the cover
-lockable main switch
-thermal protection
-110v auxiliary circuits
-automatic motor brake
-ce declaration of conformity

incl. accessories at extra charge:
1 st. "tersa" cutter with disposable reversible knives
	complete with a set of blades
	note: for high chip thickness is the increased motor recommended

1 pc 9 kw 50 hz power (s6 40%)
	with automatic star-delta switch
	9kw 12ps 50 hz (11kw 15hp 60 hz) TECHNICAL DATA: WORKING WIDTH 630 MM DIMENSIONS OF MACHINE TABLE 640 X 1000 MM WORKING HEIGHT MIN/MAX. 3.5 / 300 MM MAXIMUM CHIP THICKNESS 8 MM MINIMUM LENGTH OF WORKPIECE 260 MM MINIMUM WORKPIECE WIDTH 10 MM DRUM SPEED 4500 U/MIN SHAFT DIAMETER 120 MM 4 KNIVES 35 X 3 X 640 MM SPEED 5-8-12-18 M / MIN. DUST NOZZLE DIAMETER 150 MM BASIC EQUIPMENT: -MOTORIZED TABLE HUB WITH 2 SPEEDS AND MICROMETRIC ADJUSTMENT -TENTH ACCURATE DIGITAL DISPLAY FOR WORKING HEIGHT -MACHINE TABLE WITH 4 STEEL SCREWS HEIGHT ADJUSTMENT -1 RIBBED FEED ROLLER STEEL -1 RUBBER-SHEATHED EXCERPT REEL STEEL -INTERCHANGEABLE FEED ROLLERS -7KW 50 HZ MOTOR PERFORMANCE, 7 KW 50 HZ -MANUAL STAR-DELTA SWITCH -PROTECTION FEATURE IN THE INPUT AND OUTPUT -EMERGENCY OFF SWITCH ON FRONT OF THE MACHINE -EMERGENCY OFF SWITCH ON BACK OF THE MACHINE -SAFETY MICROSWITCH ON THE COVER -LOCKABLE MAIN SWITCH -THERMAL PROTECTION -110V AUXILIARY CIRCUITS -AUTOMATIC MOTOR BRAKE -CE DECLARATION OF CONFORMITY INCL. ACCESSORIES AT EXTRA CHARGE: 1 ST. "TERSA" CUTTER WITH DISPOSABLE REVERSIBLE KNIVES COMPLETE WITH A SET OF BLADES NOTE: FOR HIGH CHIP THICKNESS IS THE INCREASED MOTOR RECOMMENDED 1 PC 9 KW 50 HZ POWER (S6 40%) WITH AUTOMATIC STAR-DELTA SWITCH 9KW 12PS 50 HZ (11KW 15HP 60 HZ)
Vendedor: Wilhelm Bachmann GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-weight approx.: 1000 kg<br/>dimensions (l x w x h) approx.: 1000 x 1300 x 2200 mm<br/>description: - machine no.: 3100-1663<br> - speed range of milling spindles: 1600 - 15000 rpm<br> - distance between spindles min./max.: 70/460 mm<br> - precision adjustment range of spindles vertical and horizontal: approx. 15 mm<br> - usable collet chucks: diameters 2,5/4/6/8 mm WEIGHT APPROX.: 1000 KG
DIMENSIONS (L X W X H) APPROX.: 1000 X 1300 X 2200 MM
DESCRIPTION: - MACHINE NO.: 3100-1663
- SPEED RANGE OF MILLING SPINDLES: 1600 - 15000 RPM
- DISTANCE BETWEEN SPINDLES MIN./MAX.: 70/460 MM
- PRECISION ADJUSTMENT RANGE OF SPINDLES VERTICAL AND HORIZONTAL: APPROX. 15 MM
- USABLE COLLET CHUCKS: DIAMETERS 2,5/4/6/8 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 11.050 €
Ubicación: Land-we offer a used lpg forklift trucks cesab drago e300 for sale.
the truck is available immediately. the painting was not renewed. for an additional fee of â?¬500 net, it is possible.

technical data:

year of construction: 2012
hours of operation (bra): 1780
serial number: ce365406
drive: lpg
lifting capacity (kg): 3000
lifting height (mm): 5005
mast: triplex
overall height (mm): 2352
free stroke (mm): 1656
fork length (mm): 1200
wheels: se (vol)

engine: toyota 4y

additional equipment:
sideshift
camera!

price loco: â?¬11,050 net

if you are interested please confirm contact for availability. WE OFFER A USED LPG FORKLIFT TRUCKS CESAB DRAGO E300 FOR SALE. THE TRUCK IS AVAILABLE IMMEDIATELY. THE PAINTING WAS NOT RENEWED. FOR AN ADDITIONAL FEE OF &ACIRC;?&NOT;500 NET, IT IS POSSIBLE. TECHNICAL DATA: YEAR OF CONSTRUCTION: 2012 HOURS OF OPERATION (BRA): 1780 SERIAL NUMBER: CE365406 DRIVE: LPG LIFTING CAPACITY (KG): 3000 LIFTING HEIGHT (MM): 5005 MAST: TRIPLEX OVERALL HEIGHT (MM): 2352 FREE STROKE (MM): 1656 FORK LENGTH (MM): 1200 WHEELS: SE (VOL) ENGINE: TOYOTA 4Y ADDITIONAL EQUIPMENT: SIDESHIFT CAMERA! PRICE LOCO: &ACIRC;?&NOT;11,050 NET IF YOU ARE INTERESTED PLEASE CONFIRM CONTACT FOR AVAILABILITY.
Vendedor: Regalux GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 9.000 €
Ubicación: Land-weight approx.: 2500 kg<br/>dimensions (l x w x h) approx.: 5400 x 1700 x 1900 mm<br/>description: hsi<br> · machine dimensions: from 2.600 x 1.740 x h 1.720 mm to 3.185 x 1.920 x h1.595.<br> · work top height: 895± 50 mm.<br> · max sealing dimensions: from 550 to 1.250 x unlimited length.<br> · max product dimensions: h 250 x from 480 to 1.200 x unlimited lenght.<br> · max reel dimensions: Ø 350 x from 750 to 1.400.<br> · output: 20 - 30 mt/min. 40 - 60 ppm.<br> · electric power supply: 380 volt - 50hz - 5 poli.<br> · installed power: 4 kw.<br> · machine weight: 700 kg.<br> · usable films: cryovac - ppt - ppe.<br> · air comsumption in litres: 300 n/l 6 bar.<br> <br> tunnel ts 70/40<br> · machine dimensions: from 1.600 x 990 x h 1.510 mm to 2.610 x 1.795 x h 1.850.<br> · work top height: 870 ± 50 mm.<br> · dimensions entered tunnel: from 400 x h 200 mm to 1.200 x h 50 mm.<br> · output: min. 4 - max 20 mt/min.<br> · electric power supply: 380 volt - 50hz - 5 poli.<br> · installed power: from 9 kw to 30 kw.<br> · machine weight: from 300 kg to 1.100 kg.<br> · usable films: cryovac - ppt - ppe.<br> see photo WEIGHT APPROX.: 2500 KG
DIMENSIONS (L X W X H) APPROX.: 5400 X 1700 X 1900 MM
DESCRIPTION: HSI
· MACHINE DIMENSIONS: FROM 2.600 X 1.740 X H 1.720 MM TO 3.185 X 1.920 X H1.595.
· WORK TOP HEIGHT: 895± 50 MM.
· MAX SEALING DIMENSIONS: FROM 550 TO 1.250 X UNLIMITED LENGTH.
· MAX PRODUCT DIMENSIONS: H 250 X FROM 480 TO 1.200 X UNLIMITED LENGHT.
· MAX REEL DIMENSIONS: Ø 350 X FROM 750 TO 1.400.
· OUTPUT: 20 - 30 MT/MIN. 40 - 60 PPM.
· ELECTRIC POWER SUPPLY: 380 VOLT - 50HZ - 5 POLI.
· INSTALLED POWER: 4 KW.
· MACHINE WEIGHT: 700 KG.
· USABLE FILMS: CRYOVAC - PPT - PPE.
· AIR COMSUMPTION IN LITRES: 300 N/L 6 BAR.

TUNNEL TS 70/40
· MACHINE DIMENSIONS: FROM 1.600 X 990 X H 1.510 MM TO 2.610 X 1.795 X H 1.850.
· WORK TOP HEIGHT: 870 ± 50 MM.
· DIMENSIONS ENTERED TUNNEL: FROM 400 X H 200 MM TO 1.200 X H 50 MM.
· OUTPUT: MIN. 4 - MAX 20 MT/MIN.
· ELECTRIC POWER SUPPLY: 380 VOLT - 50HZ - 5 POLI.
· INSTALLED POWER: FROM 9 KW TO 30 KW.
· MACHINE WEIGHT: FROM 300 KG TO 1.100 KG.
· USABLE FILMS: CRYOVAC - PPT - PPE.
SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land--working width 400 mm - length 1700 mm - 1 head - 1 head of sabrage -WORKING WIDTH 400 MM - LENGTH 1700 MM - 1 HEAD - 1 HEAD OF SABRAGE
Vendedor: Europ-Equipement
Año de construcción: usado
Precio: used machinery auction RESALE 9.000 €
Ubicación: Land-weight approx.: 2500 kg<br/>dimensions (l x w x h) approx.: 5400 x 1700 x 1900 mm<br/>description: hsi<br> · machine dimensions: from 2.600 x 1.740 x h 1.720 mm to 3.185 x 1.920 x h1.595.<br> · work top height: 895± 50 mm.<br> · max sealing dimensions: from 550 to 1.250 x unlimited length.<br> · max product dimensions: h 250 x from 480 to 1.200 x unlimited lenght.<br> · max reel dimensions: Ø 350 x from 750 to 1.400.<br> · output: 20 - 30 mt/min. 40 - 60 ppm.<br> · electric power supply: 380 volt - 50hz - 5 poli.<br> · installed power: 4 kw.<br> · machine weight: 700 kg.<br> · usable films: cryovac - ppt - ppe.<br> · air comsumption in litres: 300 n/l 6 bar.<br> <br> tunnel ts 70/40<br> · machine dimensions: from 1.600 x 990 x h 1.510 mm to 2.610 x 1.795 x h 1.850.<br> · work top height: 870 ± 50 mm.<br> · dimensions entered tunnel: from 400 x h 200 mm to 1.200 x h 50 mm.<br> · output: min. 4 - max 20 mt/min.<br> · electric power supply: 380 volt - 50hz - 5 poli.<br> · installed power: from 9 kw to 30 kw.<br> · machine weight: from 300 kg to 1.100 kg.<br> · usable films: cryovac - ppt - ppe.<br> see photo WEIGHT APPROX.: 2500 KG
DIMENSIONS (L X W X H) APPROX.: 5400 X 1700 X 1900 MM
DESCRIPTION: HSI
· MACHINE DIMENSIONS: FROM 2.600 X 1.740 X H 1.720 MM TO 3.185 X 1.920 X H1.595.
· WORK TOP HEIGHT: 895± 50 MM.
· MAX SEALING DIMENSIONS: FROM 550 TO 1.250 X UNLIMITED LENGTH.
· MAX PRODUCT DIMENSIONS: H 250 X FROM 480 TO 1.200 X UNLIMITED LENGHT.
· MAX REEL DIMENSIONS: Ø 350 X FROM 750 TO 1.400.
· OUTPUT: 20 - 30 MT/MIN. 40 - 60 PPM.
· ELECTRIC POWER SUPPLY: 380 VOLT - 50HZ - 5 POLI.
· INSTALLED POWER: 4 KW.
· MACHINE WEIGHT: 700 KG.
· USABLE FILMS: CRYOVAC - PPT - PPE.
· AIR COMSUMPTION IN LITRES: 300 N/L 6 BAR.

TUNNEL TS 70/40
· MACHINE DIMENSIONS: FROM 1.600 X 990 X H 1.510 MM TO 2.610 X 1.795 X H 1.850.
· WORK TOP HEIGHT: 870 ± 50 MM.
· DIMENSIONS ENTERED TUNNEL: FROM 400 X H 200 MM TO 1.200 X H 50 MM.
· OUTPUT: MIN. 4 - MAX 20 MT/MIN.
· ELECTRIC POWER SUPPLY: 380 VOLT - 50HZ - 5 POLI.
· INSTALLED POWER: FROM 9 KW TO 30 KW.
· MACHINE WEIGHT: FROM 300 KG TO 1.100 KG.
· USABLE FILMS: CRYOVAC - PPT - PPE.
SEE PHOTO
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more SAB types: