9 ofertas

Año de construcción: usado
Ubicación: Land-overhaul year: 2019 year: 1998-2016
blade max carbide 500/550 mm
saw motor power: 6 kw
speed saw motor in 6 steps: 2400 3200 min-1
cutting speed (500-550 mm) blade: 3800-5500 m / min
saw blade feed adjustable 0-40 mm / s
saw height control adjustable full electronic
workspace square 90â° max: 160 x 160 mm
workspace flat 90â° max: 380 x 60 mm work area round: 90 â° max: 165 mm
supply length: 10-9999 mm
nachschubgeschw.ac-servo max. 400 mm / s
compressed air connection of be 6 bar
gewicht(sã¤ge)ca.:2850 kg
the machine is both technically and optically dimensions lxbxh(sã¤ge)ca.:2900mm x 1725 mm x 2200 mm lxw 2900 x 1725 mm footprint after a retrofit in mint condition. 

the machine is efficiently usable by their equipment and construction methods for a wide range of applications. the positioning system ensures easy and very profitable operation of the plant. due to the powerful engine, short cycle times can be even when the saw different profiles or vollmaterialen be achieved. the soundproof cabin this reduces the noise emissions to a minimum. 

the machine will be overhauled on request in our house. among others were renewed following points:
-conversion to siemens s7 plc control
-conversion on siemens hmi control panel
-replace replace the ballscrew - servo motor and servo inverters
-replace the inverter for the main drive of the saw (optional)
-new electric components
-new pneumatic lines
-maintenance or replacement of all hydraulic cylinders and valve terminals
-revision of the extraction
-overhaul menzel minimal lubrication system
-replacing common wear parts
-overhaul of the soundproofing cabin

the machine is equipped with:
-sound insulation cabin - zero point adjustment (manualy)

warranty:
we take for our systems, unless otherwise agreed, a guarantee of 6 months for all outdated by us or exchanged parts. working time, as well as wearing parts are excluded from the warranty. 

optional:
-chain-type magazine for 6 m materials
-gap extension (for a high-quality cutting surface without return tracks)
-horizontal tension saw line
-gate stop in material feeding unit
-reinforced motor 11 kw
-roller conveyors
-delivery and installation in your home
-training your staff
 OVERHAUL YEAR: 2019 YEAR: 1998-2016 BLADE MAX CARBIDE 500/550 MM SAW MOTOR POWER: 6 KW SPEED SAW MOTOR IN 6 STEPS: 2400 3200 MIN-1 CUTTING SPEED (500-550 MM) BLADE: 3800-5500 M / MIN SAW BLADE FEED ADJUSTABLE 0-40 MM / S SAW HEIGHT CONTROL ADJUSTABLE FULL ELECTRONIC WORKSPACE SQUARE 90° MAX: 160 X 160 MM WORKSPACE FLAT 90° MAX: 380 X 60 MM WORK AREA ROUND: 90 ° MAX: 165 MM SUPPLY LENGTH: 10-9999 MM NACHSCHUBGESCHW.AC-SERVO MAX. 400 MM / S COMPRESSED AIR CONNECTION OF BE 6 BAR GEWICHT(SäGE)CA.:2850 KG THE MACHINE IS BOTH TECHNICALLY AND OPTICALLY DIMENSIONS LXBXH(SäGE)CA.:2900MM X 1725 MM X 2200 MM LXW 2900 X 1725 MM FOOTPRINT AFTER A RETROFIT IN MINT CONDITION. THE MACHINE IS EFFICIENTLY USABLE BY THEIR EQUIPMENT AND CONSTRUCTION METHODS FOR A WIDE RANGE OF APPLICATIONS. THE POSITIONING SYSTEM ENSURES EASY AND VERY PROFITABLE OPERATION OF THE PLANT. DUE TO THE POWERFUL ENGINE, SHORT CYCLE TIMES CAN BE EVEN WHEN THE SAW DIFFERENT PROFILES OR VOLLMATERIALEN BE ACHIEVED. THE SOUNDPROOF CABIN THIS REDUCES THE NOISE EMISSIONS TO A MINIMUM. THE MACHINE WILL BE OVERHAULED ON REQUEST IN OUR HOUSE. AMONG OTHERS WERE RENEWED FOLLOWING POINTS: -CONVERSION TO SIEMENS S7 PLC CONTROL -CONVERSION ON SIEMENS HMI CONTROL PANEL -REPLACE REPLACE THE BALLSCREW - SERVO MOTOR AND SERVO INVERTERS -REPLACE THE INVERTER FOR THE MAIN DRIVE OF THE SAW (OPTIONAL) -NEW ELECTRIC COMPONENTS -NEW PNEUMATIC LINES -MAINTENANCE OR REPLACEMENT OF ALL HYDRAULIC CYLINDERS AND VALVE TERMINALS -REVISION OF THE EXTRACTION -OVERHAUL MENZEL MINIMAL LUBRICATION SYSTEM -REPLACING COMMON WEAR PARTS -OVERHAUL OF THE SOUNDPROOFING CABIN THE MACHINE IS EQUIPPED WITH: -SOUND INSULATION CABIN - ZERO POINT ADJUSTMENT (MANUALY) WARRANTY: WE TAKE FOR OUR SYSTEMS, UNLESS OTHERWISE AGREED, A GUARANTEE OF 6 MONTHS FOR ALL OUTDATED BY US OR EXCHANGED PARTS. WORKING TIME, AS WELL AS WEARING PARTS ARE EXCLUDED FROM THE WARRANTY. OPTIONAL: -CHAIN-TYPE MAGAZINE FOR 6 M MATERIALS -GAP EXTENSION (FOR A HIGH-QUALITY CUTTING SURFACE WITHOUT RETURN TRACKS) -HORIZONTAL TENSION SAW LINE -GATE STOP IN MATERIAL FEEDING UNIT -REINFORCED MOTOR 11 KW -ROLLER CONVEYORS -DELIVERY AND INSTALLATION IN YOUR HOME -TRAINING YOUR STAFF
Vendedor: Lupberger Systemlösungen OHG
Año de construcción: usado
Precio: 39.500 €
Ubicación: Land-de Germany, 46325 Borken
Vendedor: Komplett-Konzept Verwertungs GmbH
Año de construcción: usado
Ubicación: Land-overhaul year 2018
year of manufacture 2010
saw blades carbide 500 mm
saw motor power 7,5 kw
speed saw motor 2000-38000 min-1
cutting speed blade 3100-6000 mm / min
saw blade feed adjustable 0-40 mm / s
working range 90 â° max: 460 x 50 mm
supply length
pneumatic:
single stroke: max 300 mm
servo controlled:
single stroke: max 300 mm
multiple hub: maximum 9999 mm

nachschubgeschw. servo-controlled replenishment unit 300 mm / s
compressed air connection of be 6 bar
gewicht(saege)ca.: 1000 kg
dimensions lxbxh(saege)ca.: 2100mm x2000mm x1600mm
hydraulikagregat) approx.: 900 mm x600mm x800mm

technical description pressta eisele profilma 540 retrofit

pressta eisele profilma 540 retrofit
fully automatic high-speed sawing machine for non-ferrous metals and plastics

the machine is both technically and optically after completed retrofit in mint condition.
the machine is efficiently usable by their equipment and construction methods for a wide range of applications. especially the saw distinguished by your multiple voltage in combination with the hydraulic stamping unit, full editing easier parts in large quantities. the programmed hmi control ensure a simple and very profitable operation of the system. the soundproof cabin this reduces the noise emissions to a minimum.

the machine will be overhauled on request in our house. among others are
following renewed:
-replacement of the plc control siemens s7
-replacement of the siemens hmi user interface
-replacement of the ball spindle (with option pack servo)
-replacement of servo motor and servo inverter (with option pack servo)
-replacement of pneumatic feed cylinder (if not option package servo)
-new electric components
-new pneumatic lines
-new pneumatic components
-overhaul or replacement of pneumatic cylinder
-renewal of the valve terminal
-tuning extraction performance
-minimum lubrication system overhaul
-general wear and tear parts
-overhaul of cabin
the machine is equipped with:
-sound insulation cabin
-mass tightening possible
-hydraulic cutting preparation

warranty:
we take for our systems, unless otherwise agreed, a 6 month warranty on all refurbished by us or exchanged parts. working time, as well as wearing parts are excluded from the warranty.

optional:
-flat magazine for automatic feeding of up to 6 m long materials
-roller conveyors for stock
-delivery and installation in your home
-training your staff     OVERHAUL YEAR 2018 YEAR OF MANUFACTURE 2010 SAW BLADES CARBIDE 500 MM SAW MOTOR POWER 7,5 KW SPEED SAW MOTOR 2000-38000 MIN-1 CUTTING SPEED BLADE 3100-6000 MM / MIN SAW BLADE FEED ADJUSTABLE 0-40 MM / S WORKING RANGE 90 ° MAX: 460 X 50 MM SUPPLY LENGTH PNEUMATIC: SINGLE STROKE: MAX 300 MM SERVO CONTROLLED: SINGLE STROKE: MAX 300 MM MULTIPLE HUB: MAXIMUM 9999 MM NACHSCHUBGESCHW. SERVO-CONTROLLED REPLENISHMENT UNIT 300 MM / S COMPRESSED AIR CONNECTION OF BE 6 BAR GEWICHT(SAEGE)CA.: 1000 KG DIMENSIONS LXBXH(SAEGE)CA.: 2100MM X2000MM X1600MM HYDRAULIKAGREGAT) APPROX.: 900 MM X600MM X800MM TECHNICAL DESCRIPTION PRESSTA EISELE PROFILMA 540 RETROFIT PRESSTA EISELE PROFILMA 540 RETROFIT FULLY AUTOMATIC HIGH-SPEED SAWING MACHINE FOR NON-FERROUS METALS AND PLASTICS THE MACHINE IS BOTH TECHNICALLY AND OPTICALLY AFTER COMPLETED RETROFIT IN MINT CONDITION. THE MACHINE IS EFFICIENTLY USABLE BY THEIR EQUIPMENT AND CONSTRUCTION METHODS FOR A WIDE RANGE OF APPLICATIONS. ESPECIALLY THE SAW DISTINGUISHED BY YOUR MULTIPLE VOLTAGE IN COMBINATION WITH THE HYDRAULIC STAMPING UNIT, FULL EDITING EASIER PARTS IN LARGE QUANTITIES. THE PROGRAMMED HMI CONTROL ENSURE A SIMPLE AND VERY PROFITABLE OPERATION OF THE SYSTEM. THE SOUNDPROOF CABIN THIS REDUCES THE NOISE EMISSIONS TO A MINIMUM. THE MACHINE WILL BE OVERHAULED ON REQUEST IN OUR HOUSE. AMONG OTHERS ARE FOLLOWING RENEWED: -REPLACEMENT OF THE PLC CONTROL SIEMENS S7 -REPLACEMENT OF THE SIEMENS HMI USER INTERFACE -REPLACEMENT OF THE BALL SPINDLE (WITH OPTION PACK SERVO) -REPLACEMENT OF SERVO MOTOR AND SERVO INVERTER (WITH OPTION PACK SERVO) -REPLACEMENT OF PNEUMATIC FEED CYLINDER (IF NOT OPTION PACKAGE SERVO) -NEW ELECTRIC COMPONENTS -NEW PNEUMATIC LINES -NEW PNEUMATIC COMPONENTS -OVERHAUL OR REPLACEMENT OF PNEUMATIC CYLINDER -RENEWAL OF THE VALVE TERMINAL -TUNING EXTRACTION PERFORMANCE -MINIMUM LUBRICATION SYSTEM OVERHAUL -GENERAL WEAR AND TEAR PARTS -OVERHAUL OF CABIN THE MACHINE IS EQUIPPED WITH: -SOUND INSULATION CABIN -MASS TIGHTENING POSSIBLE -HYDRAULIC CUTTING PREPARATION WARRANTY: WE TAKE FOR OUR SYSTEMS, UNLESS OTHERWISE AGREED, A 6 MONTH WARRANTY ON ALL REFURBISHED BY US OR EXCHANGED PARTS. WORKING TIME, AS WELL AS WEARING PARTS ARE EXCLUDED FROM THE WARRANTY. OPTIONAL: -FLAT MAGAZINE FOR AUTOMATIC FEEDING OF UP TO 6 M LONG MATERIALS -ROLLER CONVEYORS FOR STOCK -DELIVERY AND INSTALLATION IN YOUR HOME -TRAINING YOUR STAFF
Vendedor: Lupberger Systemlösungen OHG
Año de construcción: usado
Precio: 89.000 €
Ubicación: Land-cnc working centre\r\nbrand: homag\r\ntype: optimat baz 232/40 / k\r\nyear of construction: 2003\r\n\r\nsummary\r\n2 retractable and removable exchangeable feet\r\n\r\nclamping table\r\n- two-part worktable with 2 processing stations for pendulum assignment\r\n- for loading and unloading, the clamping table moves forwards out of the travel range of the machine\r\n- 8 clamping consoles with tubeless vacuum guide (4 consoles per table)\r\n\r\npower control\r\n- power control - pc85 control with plc control\r\n- color monitor 17 inches with pc keyboard and mouse\r\n\r\nsoftware:\r\n- woodwob 5.0 operating system.\r\n- woodwop for graphical, dialog-oriented creation of cnc programs incl. postprocessor\r\n- graphical tool database\r\n\r\ntechnical data:\r\n- workpiece length\r\n  max. 4200 mm for single use\r\n  max. 1850 mm with pendulum assignment\r\n- workpiece width\r\n  max. 1500 mm for milling with tool diam. 20 mm\r\n  max. 1400 mm with glueing\r\n  max. 1300 mm for all units\r\n\r\nplate changer 12-compartment\r\nfor tools and units with hsk f63\r\n\r\nunits - interface for main spindle\r\nfor connecting the processing units.\r\nincl. interface pneumatics and rotary actuator c-axis with torque and 3-point support.\r\ndrive for all units with swivel axis.\r\n\r\nsawing and trimming unit for tool changer\r\nautom. change in to the main spindle.\r\nfor grooves and cuts from above with any angle.\r\n\r\ndrive spindle / v / for glueing unit\r\nbuilt on the portal for receiving and driving the glueing unit.\r\nchange manually\r\n\r\ngluing unit 360 degrees\r\nfor 360 degree gluing joint, built in drive spindle / v /.\r\nfor straight edges with direct glue application.\r\nwith melting unit and granule container.\r\naggregate can be pivoted indefinitely over c-axis.\r\ninner radius min: r = 30 mm at 90 degrees corner (edge ??dependent)\r\nedge height max. 65 mm\r\n\r\ncombined flush milling and scraping unit\r\nto autom. change to the main spindle.\r\nsimultaneous processing from above and below.\r\n\r\nlaser system mr. beam\r\n- displays the positions of the vacuum clamps specified by the programmer in woodwop, regardless of the machine function.\r\n- the display is made by displaying the contour of the vacuum clamp (4-corner)\r\n\r\n7 side and longitudinal stop bolts\r\nindividually selectable, end position monitored, electromechanically controlled, stroke 140 mm\r\n\r\ncontrol unit for 4-fold occupancy\r\nextension for 2 x 2 clamping stations.\r\nseparate vacuum systems, individually monitored.\r\nnote\r\nmax. part size with 4-fold occupancy 700 mm\r\n\r\npre-snipping station and 2-drawer roll for b230\r\n- for processing of rolls\r\n- 2-fold roller plate with roll separating device for automatic edge changing for edges of the same height\r\n- roll diameter max. 800 mm\r\n- edge height max. 65 mm\r\n- edge length min. 350 mm\r\n- residual edge length monitoring with feed stop at 1800 mm\r\n\r\nchips and leftovers disposal\r\nchip conveyor behind the processing tables for the automatic disposal of chips and waste\r\n\r\ndrill head 17 spindles\r\neach spindle individually retrievable.\r\n11 spindles in the x direction, 7 spindles in the y direction.\r\narrangement of the spindles in t-shape.\r\n\r\nmain spindle 14.5 kw\r\nvector controlled three-phase induction motor\r\n\r\nspeed ??24000 rpm\r\n\r\ndrilling / milling unit 4 spindles for tool changer\r\n\r\ncombined flush cutting-scraping unit\r\npage 1 designed for flush trimming of the edge overhangs\r\npage 2 for finishing the pre-milled edges\r\n\r\ntrimming unit for gluing unit\r\n\r\nmilling unit horizontal\r\nto autom. change to the main spindle.\r\nhorizontal gear with horizontal shaft for holding saw or milling tools with bore.\r\n\r\ndiagnosis system woodscout\r\nsoftware package for graphic diagnostics of machine condition.\r\n- graphical plc diagnostics in different levels\r\n\r\n\r\nnote:\r\nthe technical data and descriptions are a copy of the order confirmation at that time. datas are for information and are not binding. CNC WORKING CENTRE\R\NBRAND: HOMAG\R\NTYPE: OPTIMAT BAZ 232/40 / K\R\NYEAR OF CONSTRUCTION: 2003\R\N\R\NSUMMARY\R\N2 RETRACTABLE AND REMOVABLE EXCHANGEABLE FEET\R\N\R\NCLAMPING TABLE\R\N- TWO-PART WORKTABLE WITH 2 PROCESSING STATIONS FOR PENDULUM ASSIGNMENT\R\N- FOR LOADING AND UNLOADING, THE CLAMPING TABLE MOVES FORWARDS OUT OF THE TRAVEL RANGE OF THE MACHINE\R\N- 8 CLAMPING CONSOLES WITH TUBELESS VACUUM GUIDE (4 CONSOLES PER TABLE)\R\N\R\NPOWER CONTROL\R\N- POWER CONTROL - PC85 CONTROL WITH PLC CONTROL\R\N- COLOR MONITOR 17 INCHES WITH PC KEYBOARD AND MOUSE\R\N\R\NSOFTWARE:\R\N- WOODWOB 5.0 OPERATING SYSTEM.\R\N- WOODWOP FOR GRAPHICAL, DIALOG-ORIENTED CREATION OF CNC PROGRAMS INCL. POSTPROCESSOR\R\N- GRAPHICAL TOOL DATABASE\R\N\R\NTECHNICAL DATA:\R\N- WORKPIECE LENGTH\R\N MAX. 4200 MM FOR SINGLE USE\R\N MAX. 1850 MM WITH PENDULUM ASSIGNMENT\R\N- WORKPIECE WIDTH\R\N MAX. 1500 MM FOR MILLING WITH TOOL DIAM. 20 MM\R\N MAX. 1400 MM WITH GLUEING\R\N MAX. 1300 MM FOR ALL UNITS\R\N\R\NPLATE CHANGER 12-COMPARTMENT\R\NFOR TOOLS AND UNITS WITH HSK F63\R\N\R\NUNITS - INTERFACE FOR MAIN SPINDLE\R\NFOR CONNECTING THE PROCESSING UNITS.\R\NINCL. INTERFACE PNEUMATICS AND ROTARY ACTUATOR C-AXIS WITH TORQUE AND 3-POINT SUPPORT.\R\NDRIVE FOR ALL UNITS WITH SWIVEL AXIS.\R\N\R\NSAWING AND TRIMMING UNIT FOR TOOL CHANGER\R\NAUTOM. CHANGE IN TO THE MAIN SPINDLE.\R\NFOR GROOVES AND CUTS FROM ABOVE WITH ANY ANGLE.\R\N\R\NDRIVE SPINDLE / V / FOR GLUEING UNIT\R\NBUILT ON THE PORTAL FOR RECEIVING AND DRIVING THE GLUEING UNIT.\R\NCHANGE MANUALLY\R\N\R\NGLUING UNIT 360 DEGREES\R\NFOR 360 DEGREE GLUING JOINT, BUILT IN DRIVE SPINDLE / V /.\R\NFOR STRAIGHT EDGES WITH DIRECT GLUE APPLICATION.\R\NWITH MELTING UNIT AND GRANULE CONTAINER.\R\NAGGREGATE CAN BE PIVOTED INDEFINITELY OVER C-AXIS.\R\NINNER RADIUS MIN: R = 30 MM AT 90 DEGREES CORNER (EDGE ??DEPENDENT)\R\NEDGE HEIGHT MAX. 65 MM\R\N\R\NCOMBINED FLUSH MILLING AND SCRAPING UNIT\R\NTO AUTOM. CHANGE TO THE MAIN SPINDLE.\R\NSIMULTANEOUS PROCESSING FROM ABOVE AND BELOW.\R\N\R\NLASER SYSTEM MR. BEAM\R\N- DISPLAYS THE POSITIONS OF THE VACUUM CLAMPS SPECIFIED BY THE PROGRAMMER IN WOODWOP, REGARDLESS OF THE MACHINE FUNCTION.\R\N- THE DISPLAY IS MADE BY DISPLAYING THE CONTOUR OF THE VACUUM CLAMP (4-CORNER)\R\N\R\N7 SIDE AND LONGITUDINAL STOP BOLTS\R\NINDIVIDUALLY SELECTABLE, END POSITION MONITORED, ELECTROMECHANICALLY CONTROLLED, STROKE 140 MM\R\N\R\NCONTROL UNIT FOR 4-FOLD OCCUPANCY\R\NEXTENSION FOR 2 X 2 CLAMPING STATIONS.\R\NSEPARATE VACUUM SYSTEMS, INDIVIDUALLY MONITORED.\R\NNOTE\R\NMAX. PART SIZE WITH 4-FOLD OCCUPANCY 700 MM\R\N\R\NPRE-SNIPPING STATION AND 2-DRAWER ROLL FOR B230\R\N- FOR PROCESSING OF ROLLS\R\N- 2-FOLD ROLLER PLATE WITH ROLL SEPARATING DEVICE FOR AUTOMATIC EDGE CHANGING FOR EDGES OF THE SAME HEIGHT\R\N- ROLL DIAMETER MAX. 800 MM\R\N- EDGE HEIGHT MAX. 65 MM\R\N- EDGE LENGTH MIN. 350 MM\R\N- RESIDUAL EDGE LENGTH MONITORING WITH FEED STOP AT 1800 MM\R\N\R\NCHIPS AND LEFTOVERS DISPOSAL\R\NCHIP CONVEYOR BEHIND THE PROCESSING TABLES FOR THE AUTOMATIC DISPOSAL OF CHIPS AND WASTE\R\N\R\NDRILL HEAD 17 SPINDLES\R\NEACH SPINDLE INDIVIDUALLY RETRIEVABLE.\R\N11 SPINDLES IN THE X DIRECTION, 7 SPINDLES IN THE Y DIRECTION.\R\NARRANGEMENT OF THE SPINDLES IN T-SHAPE.\R\N\R\NMAIN SPINDLE 14.5 KW\R\NVECTOR CONTROLLED THREE-PHASE INDUCTION MOTOR\R\N\R\NSPEED ??24000 RPM\R\N\R\NDRILLING / MILLING UNIT 4 SPINDLES FOR TOOL CHANGER\R\N\R\NCOMBINED FLUSH CUTTING-SCRAPING UNIT\R\NPAGE 1 DESIGNED FOR FLUSH TRIMMING OF THE EDGE OVERHANGS\R\NPAGE 2 FOR FINISHING THE PRE-MILLED EDGES\R\N\R\NTRIMMING UNIT FOR GLUING UNIT\R\N\R\NMILLING UNIT HORIZONTAL\R\NTO AUTOM. CHANGE TO THE MAIN SPINDLE.\R\NHORIZONTAL GEAR WITH HORIZONTAL SHAFT FOR HOLDING SAW OR MILLING TOOLS WITH BORE.\R\N\R\NDIAGNOSIS SYSTEM WOODSCOUT\R\NSOFTWARE PACKAGE FOR GRAPHIC DIAGNOSTICS OF MACHINE CONDITION.\R\N- GRAPHICAL PLC DIAGNOSTICS IN DIFFERENT LEVELS\R\N\R\N\R\NNOTE:\R\NTHE TECHNICAL DATA AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATAS ARE FOR INFORMATION AND ARE NOT BINDING.
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-overhaul year 2018
year of construction 1995-2005
saw blades carbide / hss 450 mm
power saw motor 5.5 kw
speed infinitely variable 10 - 60 min-1
cutting speed blade (450 mm) 15-75 m / min
saw height control infinitely adjustable electronic 5

workspace square 90â° max: 140 x 140 mm
workspace flat 90â° max: 240 x 80 mm
work area around 90â° max: 150 mm
supply length 5-9999 mm
supply ac servo max speed: 500 mm / s
(saw) approximate weight: 2100 kg
dimensions lxwxh (saw) about: 2500mm x 1300mm x 2100mm
footprint lxw 2500 mm x 1300 mm

the machine is efficiently usable by their equipment and construction methods for a wide range of applications. the hmi interface to control the machine ensures a simple and trouble-free operation of the system. due to the construction of the sawing machine, it is possible to realize a very accurate length tolerances.
the machine will be overhauled on request in our house. among other things, following points are renewed:
-conversion to siemens s7 plc control
-conversion on siemens hmi control panel
-replacement of ball screws
-replacement of servo motor and servo inverters
-replace the inverter for the main drive of the saw
-new electronic components
-maintenance or replacement of all hydraulic cylinders and valve terminals
-optimization and overhaul of the cooling system
-replacing common wear parts
-overhaul of the machine body

the machine is equipped with:
-fully automatic feeding
-fully automatic height control
-frequency controlled main saw motor
-hydraulic clamping of material
warranty:
we take for our systems, unless otherwise agreed, a 6 month warranty on all refurbished by us or exchanged parts. working time, as well as wearing parts are excluded from the warranty.
optional:
-extra long material feed device (2000 mm) cut to the rational large section lengths
-chain-type magazine for 6 m materials
-removal hook system for the sorting of the section pieces
-delivery and installation in your home
-training your staff
        OVERHAUL YEAR 2018 YEAR OF CONSTRUCTION 1995-2005 SAW BLADES CARBIDE / HSS 450 MM POWER SAW MOTOR 5.5 KW SPEED INFINITELY VARIABLE 10 - 60 MIN-1 CUTTING SPEED BLADE (450 MM) 15-75 M / MIN SAW HEIGHT CONTROL INFINITELY ADJUSTABLE ELECTRONIC 5 WORKSPACE SQUARE 90° MAX: 140 X 140 MM WORKSPACE FLAT 90° MAX: 240 X 80 MM WORK AREA AROUND 90° MAX: 150 MM SUPPLY LENGTH 5-9999 MM SUPPLY AC SERVO MAX SPEED: 500 MM / S (SAW) APPROXIMATE WEIGHT: 2100 KG DIMENSIONS LXWXH (SAW) ABOUT: 2500MM X 1300MM X 2100MM FOOTPRINT LXW 2500 MM X 1300 MM THE MACHINE IS EFFICIENTLY USABLE BY THEIR EQUIPMENT AND CONSTRUCTION METHODS FOR A WIDE RANGE OF APPLICATIONS. THE HMI INTERFACE TO CONTROL THE MACHINE ENSURES A SIMPLE AND TROUBLE-FREE OPERATION OF THE SYSTEM. DUE TO THE CONSTRUCTION OF THE SAWING MACHINE, IT IS POSSIBLE TO REALIZE A VERY ACCURATE LENGTH TOLERANCES. THE MACHINE WILL BE OVERHAULED ON REQUEST IN OUR HOUSE. AMONG OTHER THINGS, FOLLOWING POINTS ARE RENEWED: -CONVERSION TO SIEMENS S7 PLC CONTROL -CONVERSION ON SIEMENS HMI CONTROL PANEL -REPLACEMENT OF BALL SCREWS -REPLACEMENT OF SERVO MOTOR AND SERVO INVERTERS -REPLACE THE INVERTER FOR THE MAIN DRIVE OF THE SAW -NEW ELECTRONIC COMPONENTS -MAINTENANCE OR REPLACEMENT OF ALL HYDRAULIC CYLINDERS AND VALVE TERMINALS -OPTIMIZATION AND OVERHAUL OF THE COOLING SYSTEM -REPLACING COMMON WEAR PARTS -OVERHAUL OF THE MACHINE BODY THE MACHINE IS EQUIPPED WITH: -FULLY AUTOMATIC FEEDING -FULLY AUTOMATIC HEIGHT CONTROL -FREQUENCY CONTROLLED MAIN SAW MOTOR -HYDRAULIC CLAMPING OF MATERIAL WARRANTY: WE TAKE FOR OUR SYSTEMS, UNLESS OTHERWISE AGREED, A 6 MONTH WARRANTY ON ALL REFURBISHED BY US OR EXCHANGED PARTS. WORKING TIME, AS WELL AS WEARING PARTS ARE EXCLUDED FROM THE WARRANTY. OPTIONAL: -EXTRA LONG MATERIAL FEED DEVICE (2000 MM) CUT TO THE RATIONAL LARGE SECTION LENGTHS -CHAIN-TYPE MAGAZINE FOR 6 M MATERIALS -REMOVAL HOOK SYSTEM FOR THE SORTING OF THE SECTION PIECES -DELIVERY AND INSTALLATION IN YOUR HOME -TRAINING YOUR STAFF
Vendedor: Lupberger Systemlösungen OHG
Año de construcción: usado
Precio: 7.190 €
Ubicación: Land-cutting width: max. 310 mm<br/>cutting height: max. 125 mm<br/>saw blade diameter: 500 mm<br/>motor output: 5,5 kw<br/>speed: 2.800 u/min.<br/>required air-pressure: 6-8 bar<br/>working height: 900 +/- 20 mm<br/>dimensions (l/w/h): 4530x860x1300 mm<br/>salvador classic 50 - the semi-automatic cross-cut saw<br/>-------------------------------------------------- -<br/><br/>- structure completely made of lacquered, thick steel profiles, very stable<br/>- two-hand safety control in ergonomic position<br/>- cutting speed adjustable by pneumatic trimmer on the machine<br/>- system for compensating the weight of the cutting unit, for a long time<br/>life.<br/>- special amortizing system<br/>- upper pneumatic beam for pressing the workpiece with<br/>electropneumatic control<br/>- movement system of the low-pressure beam with new skf plain bearing with <br/>double<br/>- dust protection and automatic lubrication<br/>- electrical equipment according to ce standards<br/><br/><br/>technical specifications:<br/>-------------------------------<br/>cross section max. mm. 220x125, 260x100, 285x80, 310x50<br/>when sawing packages, the maximum height is mm. 100<br/><br/>sawing motor 5.5 kw<br/><br/>saw blade diameter 500 mm (z = 108, hole 35 mm)<br/><br/>speed ??2,800 u / min<br/><br/>suction nozzle diameter 1 x 120 mm, 1 x 100 mm<br/><br/>compressed air 6-8 bar<br/><br/>400 v, 50 hz, 3 phases<br/><br/>demonstration machine additionally equipped with:<br/>-------------------------------<br/>2 m inlet table with driven rollers<br/>rolls with load capacity 230 kg, diameter 60 mm, distance between the rollers <br/>250<br/>mm, depth 320 mm<br/><br/>2 m outlet with driven rollers<br/>rolls with load capacity 230 kg, diameter 60 mm, distance between the rollers <br/>250<br/>mm, depth 320 mm<br/><br/>2 pcs. strong mechanical-pneumatic stops with width 100 mm<br/><br/>further options such as longer inlet / outlet, stop systems on request!<br/><br/>(technical data according to manufacturer without warranty!)<br/><br/><br/><br/><br/> CUTTING WIDTH: MAX. 310 MM
CUTTING HEIGHT: MAX. 125 MM
SAW BLADE DIAMETER: 500 MM
MOTOR OUTPUT: 5,5 KW
SPEED: 2.800 U/MIN.
REQUIRED AIR-PRESSURE: 6-8 BAR
WORKING HEIGHT: 900 +/- 20 MM
DIMENSIONS (L/W/H): 4530X860X1300 MM
SALVADOR CLASSIC 50 - THE SEMI-AUTOMATIC CROSS-CUT SAW
-------------------------------------------------- -

- STRUCTURE COMPLETELY MADE OF LACQUERED, THICK STEEL PROFILES, VERY STABLE
- TWO-HAND SAFETY CONTROL IN ERGONOMIC POSITION
- CUTTING SPEED ADJUSTABLE BY PNEUMATIC TRIMMER ON THE MACHINE
- SYSTEM FOR COMPENSATING THE WEIGHT OF THE CUTTING UNIT, FOR A LONG TIME
LIFE.
- SPECIAL AMORTIZING SYSTEM
- UPPER PNEUMATIC BEAM FOR PRESSING THE WORKPIECE WITH
ELECTROPNEUMATIC CONTROL
- MOVEMENT SYSTEM OF THE LOW-PRESSURE BEAM WITH NEW SKF PLAIN BEARING WITH
DOUBLE
- DUST PROTECTION AND AUTOMATIC LUBRICATION
- ELECTRICAL EQUIPMENT ACCORDING TO CE STANDARDS


TECHNICAL SPECIFICATIONS:
-------------------------------
CROSS SECTION MAX. MM. 220X125, 260X100, 285X80, 310X50
WHEN SAWING PACKAGES, THE MAXIMUM HEIGHT IS MM. 100

SAWING MOTOR 5.5 KW

SAW BLADE DIAMETER 500 MM (Z = 108, HOLE 35 MM)

SPEED ??2,800 U / MIN

SUCTION NOZZLE DIAMETER 1 X 120 MM, 1 X 100 MM

COMPRESSED AIR 6-8 BAR

400 V, 50 HZ, 3 PHASES

DEMONSTRATION MACHINE ADDITIONALLY EQUIPPED WITH:
-------------------------------
2 M INLET TABLE WITH DRIVEN ROLLERS
ROLLS WITH LOAD CAPACITY 230 KG, DIAMETER 60 MM, DISTANCE BETWEEN THE ROLLERS
250
MM, DEPTH 320 MM

2 M OUTLET WITH DRIVEN ROLLERS
ROLLS WITH LOAD CAPACITY 230 KG, DIAMETER 60 MM, DISTANCE BETWEEN THE ROLLERS
250
MM, DEPTH 320 MM

2 PCS. STRONG MECHANICAL-PNEUMATIC STOPS WITH WIDTH 100 MM

FURTHER OPTIONS SUCH AS LONGER INLET / OUTLET, STOP SYSTEMS ON REQUEST!

(TECHNICAL DATA ACCORDING TO MANUFACTURER WITHOUT WARRANTY!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-plc control: plc b & r c220
saw blade 350-400 mm
motor power 15 kw
speed 1500-6000 min-1
cutting speed 1650-7500 m / min
saw height control: fully electronic
square maximum working range: 130 mm
flat maximum work area: 200 x 100 mm
round maximum working range: 130 mm
saw speed 0-40 mm / s adjustable
section length 5-900 mm (~ 9999 mm multiple hub)
nachschubgeschw. max 350 mm / s
(saw) approximate weight: 2100 kg
(magazine), approx.: 2000 kg
dimensions lxwxh (saw) approx.: 2000mm x 2000mm x 2200mm
(magazine) about: 7300mm x 3800mm x 1200mm
footprint lxw 9200 x 4200 mm

fully automatic high-speed sawing machine with supply chain magazine for non-ferrous metals and plastics

the machine is efficiently usable by their equipment and construction methods for a wide range of applications. the plc control ensure a simple and very profitable operation of the system. due to the powerful engine, short cycle times can be even when the saw different profiles or vollmaterialen be achieved. the soundproof cabin this reduces the noise emissions to a minimum.

the machine will be overhauled on request in our house. among other things, following points are renewed:
-conversion to siemens s7

-renewal of the ball screw
-new hydraulic hoses (hydraulic version)
-new pneumatic lines (pneumatic version)
-pneumatische-new and or hydraulic components
-overhaul of control valves
-optimization of suction power
-overhaul of the menzel minimal lubrication system
-replacing common wear parts
-overhaul of cabin
-renewal of all bearings and wear parts
-exchange of frequency inverters and servo power

the machine is equipped with:
-reinforced motor 15 kw
-minimization of material remaining piece
-sound insulation cabin
-gap extension (for a high-quality cutting surface without return tracks)

warranty:
we take for our systems, unless otherwise agreed, a 6 month warranty on all refurbished by us or exchanged parts. working time, as well as wearing parts are excluded from the warranty.

optional:
-bulk jig to the parallel saw cut of several workpieces
-hydraulic clamping system
-flat magazine for automatic feeding of up to 6 m long materials
-roller conveyors on supply side - roller conveyors on outlet side - delivery and installation in your home
-training your staff          PLC CONTROL: PLC B & R C220 SAW BLADE 350-400 MM MOTOR POWER 15 KW SPEED 1500-6000 MIN-1 CUTTING SPEED 1650-7500 M / MIN SAW HEIGHT CONTROL: FULLY ELECTRONIC SQUARE MAXIMUM WORKING RANGE: 130 MM FLAT MAXIMUM WORK AREA: 200 X 100 MM ROUND MAXIMUM WORKING RANGE: 130 MM SAW SPEED 0-40 MM / S ADJUSTABLE SECTION LENGTH 5-900 MM (~ 9999 MM MULTIPLE HUB) NACHSCHUBGESCHW. MAX 350 MM / S (SAW) APPROXIMATE WEIGHT: 2100 KG (MAGAZINE), APPROX.: 2000 KG DIMENSIONS LXWXH (SAW) APPROX.: 2000MM X 2000MM X 2200MM (MAGAZINE) ABOUT: 7300MM X 3800MM X 1200MM FOOTPRINT LXW 9200 X 4200 MM FULLY AUTOMATIC HIGH-SPEED SAWING MACHINE WITH SUPPLY CHAIN MAGAZINE FOR NON-FERROUS METALS AND PLASTICS THE MACHINE IS EFFICIENTLY USABLE BY THEIR EQUIPMENT AND CONSTRUCTION METHODS FOR A WIDE RANGE OF APPLICATIONS. THE PLC CONTROL ENSURE A SIMPLE AND VERY PROFITABLE OPERATION OF THE SYSTEM. DUE TO THE POWERFUL ENGINE, SHORT CYCLE TIMES CAN BE EVEN WHEN THE SAW DIFFERENT PROFILES OR VOLLMATERIALEN BE ACHIEVED. THE SOUNDPROOF CABIN THIS REDUCES THE NOISE EMISSIONS TO A MINIMUM. THE MACHINE WILL BE OVERHAULED ON REQUEST IN OUR HOUSE. AMONG OTHER THINGS, FOLLOWING POINTS ARE RENEWED: -CONVERSION TO SIEMENS S7 -RENEWAL OF THE BALL SCREW -NEW HYDRAULIC HOSES (HYDRAULIC VERSION) -NEW PNEUMATIC LINES (PNEUMATIC VERSION) -PNEUMATISCHE-NEW AND OR HYDRAULIC COMPONENTS -OVERHAUL OF CONTROL VALVES -OPTIMIZATION OF SUCTION POWER -OVERHAUL OF THE MENZEL MINIMAL LUBRICATION SYSTEM -REPLACING COMMON WEAR PARTS -OVERHAUL OF CABIN -RENEWAL OF ALL BEARINGS AND WEAR PARTS -EXCHANGE OF FREQUENCY INVERTERS AND SERVO POWER THE MACHINE IS EQUIPPED WITH: -REINFORCED MOTOR 15 KW -MINIMIZATION OF MATERIAL REMAINING PIECE -SOUND INSULATION CABIN -GAP EXTENSION (FOR A HIGH-QUALITY CUTTING SURFACE WITHOUT RETURN TRACKS) WARRANTY: WE TAKE FOR OUR SYSTEMS, UNLESS OTHERWISE AGREED, A 6 MONTH WARRANTY ON ALL REFURBISHED BY US OR EXCHANGED PARTS. WORKING TIME, AS WELL AS WEARING PARTS ARE EXCLUDED FROM THE WARRANTY. OPTIONAL: -BULK JIG TO THE PARALLEL SAW CUT OF SEVERAL WORKPIECES -HYDRAULIC CLAMPING SYSTEM -FLAT MAGAZINE FOR AUTOMATIC FEEDING OF UP TO 6 M LONG MATERIALS -ROLLER CONVEYORS ON SUPPLY SIDE - ROLLER CONVEYORS ON OUTLET SIDE - DELIVERY AND INSTALLATION IN YOUR HOME -TRAINING YOUR STAFF
Vendedor: Lupberger Systemlösungen OHG
Año de construcción: usado
Ubicación: Land-overhauled: 2018
year of construction: 1985-2017
saw band 275-315 mm
engine power 11.0 kw
cutting speed 225-1200 m / min
square maximum working range: 15-80 mm
round maximum working range: 15-90 mm
saw feed 2-100 mm / s adjustable
section length 5-250 mm
nachschubgeschw. max 1000 mm / s
(saw) approximate weight: 1500 kg
(magazine) about: 1000 kg
dimensions lxwxh (saw) approx.: 1100 x 1600mm x 2300mm
(magazine) about: 5500mm x 1400mm x 1600mm

the machine is suitable facilities and construction for mass editing of non-ferrous metals and is the predecessor of kastowa m9 kastospeed m9.
the saw line is currently in preliminary line status and can be visited only in original condition without function. the plant will be located after overhaul (retrofit) in like new condition, which is also guaranteed by our house.

the machine will be overhauled on request in our house. among other things, following points are renewed:

-new plc control siemens s7
-conversion to siemens hmi
-conversion to fully electronic section length choice (optional)
-new electric components
-new pneumatic lines
-reconditioned or replacement of pneumatic components
-new hydraulic lines
-reconditioned or substitute of all hydraulic components
-overhaul menzel minimal lubrication system
-replacing common wear parts
-overhaul of the loader
-addition of the safety concept

the machine is equipped with:

-anti-slip magazine for 4 m rods (optional 6 m)
-material supply unit hydraulic

warranty:
we take for our systems, unless otherwise agreed, a 6 month warranty on all refurbished by us or exchanged parts. working time, as well as wearing parts are excluded from the warranty.

optional:

-anti-slip magazine extension 6 m
-conversion to chip extraction
-conversion to manualy trapezoidal spindle stroke 0-800 mm
-conversion to the ball screw drive stop fully electronic 0-800 mm
-conversion of main saw drive to 18 kw
-delivery and installation in your home
-training your staff          OVERHAULED: 2018 YEAR OF CONSTRUCTION: 1985-2017 SAW BAND 275-315 MM ENGINE POWER 11.0 KW CUTTING SPEED 225-1200 M / MIN SQUARE MAXIMUM WORKING RANGE: 15-80 MM ROUND MAXIMUM WORKING RANGE: 15-90 MM SAW FEED 2-100 MM / S ADJUSTABLE SECTION LENGTH 5-250 MM NACHSCHUBGESCHW. MAX 1000 MM / S (SAW) APPROXIMATE WEIGHT: 1500 KG (MAGAZINE) ABOUT: 1000 KG DIMENSIONS LXWXH (SAW) APPROX.: 1100 X 1600MM X 2300MM (MAGAZINE) ABOUT: 5500MM X 1400MM X 1600MM THE MACHINE IS SUITABLE FACILITIES AND CONSTRUCTION FOR MASS EDITING OF NON-FERROUS METALS AND IS THE PREDECESSOR OF KASTOWA M9 KASTOSPEED M9. THE SAW LINE IS CURRENTLY IN PRELIMINARY LINE STATUS AND CAN BE VISITED ONLY IN ORIGINAL CONDITION WITHOUT FUNCTION. THE PLANT WILL BE LOCATED AFTER OVERHAUL (RETROFIT) IN LIKE NEW CONDITION, WHICH IS ALSO GUARANTEED BY OUR HOUSE. THE MACHINE WILL BE OVERHAULED ON REQUEST IN OUR HOUSE. AMONG OTHER THINGS, FOLLOWING POINTS ARE RENEWED: -NEW PLC CONTROL SIEMENS S7 -CONVERSION TO SIEMENS HMI -CONVERSION TO FULLY ELECTRONIC SECTION LENGTH CHOICE (OPTIONAL) -NEW ELECTRIC COMPONENTS -NEW PNEUMATIC LINES -RECONDITIONED OR REPLACEMENT OF PNEUMATIC COMPONENTS -NEW HYDRAULIC LINES -RECONDITIONED OR SUBSTITUTE OF ALL HYDRAULIC COMPONENTS -OVERHAUL MENZEL MINIMAL LUBRICATION SYSTEM -REPLACING COMMON WEAR PARTS -OVERHAUL OF THE LOADER -ADDITION OF THE SAFETY CONCEPT THE MACHINE IS EQUIPPED WITH: -ANTI-SLIP MAGAZINE FOR 4 M RODS (OPTIONAL 6 M) -MATERIAL SUPPLY UNIT HYDRAULIC WARRANTY: WE TAKE FOR OUR SYSTEMS, UNLESS OTHERWISE AGREED, A 6 MONTH WARRANTY ON ALL REFURBISHED BY US OR EXCHANGED PARTS. WORKING TIME, AS WELL AS WEARING PARTS ARE EXCLUDED FROM THE WARRANTY. OPTIONAL: -ANTI-SLIP MAGAZINE EXTENSION 6 M -CONVERSION TO CHIP EXTRACTION -CONVERSION TO MANUALY TRAPEZOIDAL SPINDLE STROKE 0-800 MM -CONVERSION TO THE BALL SCREW DRIVE STOP FULLY ELECTRONIC 0-800 MM -CONVERSION OF MAIN SAW DRIVE TO 18 KW -DELIVERY AND INSTALLATION IN YOUR HOME -TRAINING YOUR STAFF
Vendedor: Lupberger Systemlösungen OHG
Año de construcción: usado
Ubicación: Land-year of construction: 1992-2007
plc: siemens s7
blade 60-250 mm
power 1,5 kw
saw blade feed 0-20 mm / min
cutting speed: 30-170 m / min (steel)
800 - 2400 m/min (non-ferrous metals)
workspace square max: 50 mm
work area round: 5-70 mm
supply length 5-1000 mm
5-9999 (multiple stroke)
nachschubgeschw. max 500 mm / sec
(saw) approximate weight: 1500 kg
(magazine), approx.: 800 kg (optional)
dimensions lxwxh (saw) about: 2500 x 1000 x 2000mm
(magazine) about: 6500mm x 1500mm x 1300mm (optional)
footprint lxw 2500 mm x 1000 mm

the machine will be overhauled on request in our house. among other things, following points are renewed:
-conversion to siemens s7 plc control
-conversion on siemens hmi control panel
-replacement of pneumatic feed or replacement of ball screws
-replacement of servo motor and servo inverters
-replace the inverter for the main drive of the saw
-new electronic components
-new pneumatic lines
-maintenance or replacement of all pneumatic cylinder and valve terminals
-optimization of the extraction approach
-maintenance of the central and minimal lubrication system
-replacing common wear parts
-overhaul of the machine body

the machine is equipped with:
-extra long (1000mm) feed device for efficient sawing of large section lengths.
-minimum lubrication for optimal saw qualities
-spindle with gear ratio for steel

the machine is suitable facilities and construction for mass editing of steel in high-precision tolerance range.

warranty:
we take for our systems, unless otherwise agreed, a 6 month warranty on all refurbished by us or exchanged parts. working time, as well as wearing parts are excluded from the warranty.

optional:
-reconstruction of the saw unit on a gearless main drive for cutting non-ferrous metals and plastic materials (speed 1000 â?? 3000 / 1 min.).
-helical magazine 4 m
-helical magazine 6 m
-servo-controlled material feeding
-servo-controlled saw speed
-conversion to prismatic jaws (60 â°) for bulk voltage of round material
-removal system
-delivery and installation in your home
-training your staff             YEAR OF CONSTRUCTION: 1992-2007 PLC: SIEMENS S7 BLADE 60-250 MM POWER 1,5 KW SAW BLADE FEED 0-20 MM / MIN CUTTING SPEED: 30-170 M / MIN (STEEL) 800 - 2400 M/MIN (NON-FERROUS METALS) WORKSPACE SQUARE MAX: 50 MM WORK AREA ROUND: 5-70 MM SUPPLY LENGTH 5-1000 MM 5-9999 (MULTIPLE STROKE) NACHSCHUBGESCHW. MAX 500 MM / SEC (SAW) APPROXIMATE WEIGHT: 1500 KG (MAGAZINE), APPROX.: 800 KG (OPTIONAL) DIMENSIONS LXWXH (SAW) ABOUT: 2500 X 1000 X 2000MM (MAGAZINE) ABOUT: 6500MM X 1500MM X 1300MM (OPTIONAL) FOOTPRINT LXW 2500 MM X 1000 MM THE MACHINE WILL BE OVERHAULED ON REQUEST IN OUR HOUSE. AMONG OTHER THINGS, FOLLOWING POINTS ARE RENEWED: -CONVERSION TO SIEMENS S7 PLC CONTROL -CONVERSION ON SIEMENS HMI CONTROL PANEL -REPLACEMENT OF PNEUMATIC FEED OR REPLACEMENT OF BALL SCREWS -REPLACEMENT OF SERVO MOTOR AND SERVO INVERTERS -REPLACE THE INVERTER FOR THE MAIN DRIVE OF THE SAW -NEW ELECTRONIC COMPONENTS -NEW PNEUMATIC LINES -MAINTENANCE OR REPLACEMENT OF ALL PNEUMATIC CYLINDER AND VALVE TERMINALS -OPTIMIZATION OF THE EXTRACTION APPROACH -MAINTENANCE OF THE CENTRAL AND MINIMAL LUBRICATION SYSTEM -REPLACING COMMON WEAR PARTS -OVERHAUL OF THE MACHINE BODY THE MACHINE IS EQUIPPED WITH: -EXTRA LONG (1000MM) FEED DEVICE FOR EFFICIENT SAWING OF LARGE SECTION LENGTHS. -MINIMUM LUBRICATION FOR OPTIMAL SAW QUALITIES -SPINDLE WITH GEAR RATIO FOR STEEL THE MACHINE IS SUITABLE FACILITIES AND CONSTRUCTION FOR MASS EDITING OF STEEL IN HIGH-PRECISION TOLERANCE RANGE. WARRANTY: WE TAKE FOR OUR SYSTEMS, UNLESS OTHERWISE AGREED, A 6 MONTH WARRANTY ON ALL REFURBISHED BY US OR EXCHANGED PARTS. WORKING TIME, AS WELL AS WEARING PARTS ARE EXCLUDED FROM THE WARRANTY. OPTIONAL: -RECONSTRUCTION OF THE SAW UNIT ON A GEARLESS MAIN DRIVE FOR CUTTING NON-FERROUS METALS AND PLASTIC MATERIALS (SPEED 1000 &ACIRC;?? 3000 / 1 MIN.). -HELICAL MAGAZINE 4 M -HELICAL MAGAZINE 6 M -SERVO-CONTROLLED MATERIAL FEEDING -SERVO-CONTROLLED SAW SPEED -CONVERSION TO PRISMATIC JAWS (60 &ACIRC;&DEG;) FOR BULK VOLTAGE OF ROUND MATERIAL -REMOVAL SYSTEM -DELIVERY AND INSTALLATION IN YOUR HOME -TRAINING YOUR STAFF
Vendedor: Lupberger Systemlösungen OHG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)