13 ofertas

Año de construcción: usado
Ubicación: Land-(1) two units of 9000kw gas turbine(60hz) were overhauled in 2005.

1 unit operated for 10 hours and another unit operated for 1000 hours since 2005.

that is to say, these two units of 9000kw gas turbine are best gas turbines

with little use after overhaul in 2005.

(2) are 50 hz brand new 2 units of generator whose make year is 2013 in korea there.

when these two units of 50 hz brand new generator are attached to the two units of 9000kw gas turbine, they can be best used gas turbine 2 sets.

the cost of attaching these brand new 2 units of generator to the 9000kw gas turbine is 400,000usd.

in short, if you add 400,000usd to the previous price of 2 units of 9000kw gas turbine, that is the price of 2 sets of gas turbine.

(3) the korean engineering company that wants to change 60 hz of into 50 hz can install and test operate in the buyer's country.

more info on request

(1) TWO UNITS OF 9000KW GAS TURBINE(60HZ) WERE OVERHAULED IN 2005. 1 UNIT OPERATED FOR 10 HOURS AND ANOTHER UNIT OPERATED FOR 1000 HOURS SINCE 2005. THAT IS TO SAY, THESE TWO UNITS OF 9000KW GAS TURBINE ARE BEST GAS TURBINES WITH LITTLE USE AFTER OVERHAUL IN 2005. (2) ARE 50 HZ BRAND NEW 2 UNITS OF GENERATOR WHOSE MAKE YEAR IS 2013 IN KOREA THERE. WHEN THESE TWO UNITS OF 50 HZ BRAND NEW GENERATOR ARE ATTACHED TO THE TWO UNITS OF 9000KW GAS TURBINE, THEY CAN BE BEST USED GAS TURBINE 2 SETS. THE COST OF ATTACHING THESE BRAND NEW 2 UNITS OF GENERATOR TO THE 9000KW GAS TURBINE IS 400,000USD. IN SHORT, IF YOU ADD 400,000USD TO THE PREVIOUS PRICE OF 2 UNITS OF 9000KW GAS TURBINE, THAT IS THE PRICE OF 2 SETS OF GAS TURBINE. (3) THE KOREAN ENGINEERING COMPANY THAT WANTS TO CHANGE 60 HZ OF INTO 50 HZ CAN INSTALL AND TEST OPERATE IN THE BUYER'S COUNTRY. MORE INFO ON REQUEST
Vendedor: MPC ENGINEERING GMBH
Año de construcción: usado
Ubicación: Land-pressure: 100 t<br/>stroke: 400 mm<br/>daylight between the columns: 400 x 1000 mm<br/>dayligth: 900 mm<br/>: 250 mm<br/>diameter of piston: 90 mm<br/>liter capacity: 11,8 l<br/>work pressure of hydraulic: max. 250 bar<br/>return speed: 7,8 mm/sec<br/>pre-running speed: 6,2 mm/sec<br/>motor output: 4,0 kw<br/>weight of the machine ca.: 0,82 t<br/>dimensions of the machine ca.: 1,7 x 0,86 x 2,28 m<br/><br/><br/><br/><br/> PRESSURE: 100 T
STROKE: 400 MM
DAYLIGHT BETWEEN THE COLUMNS: 400 X 1000 MM
DAYLIGTH: 900 MM
: 250 MM
DIAMETER OF PISTON: 90 MM
LITER CAPACITY: 11,8 L
WORK PRESSURE OF HYDRAULIC: MAX. 250 BAR
RETURN SPEED: 7,8 MM/SEC
PRE-RUNNING SPEED: 6,2 MM/SEC
MOTOR OUTPUT: 4,0 KW
WEIGHT OF THE MACHINE CA.: 0,82 T
DIMENSIONS OF THE MACHINE CA.: 1,7 X 0,86 X 2,28 M




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-say mak workshop press

type shp 250

-cilinderslag 400 mm
-werkbreedte 1200 x 450 mm
-verplaatsbaar cilinder is
-pressure gauge
-met v-blokken
-noodstop
-weight 2250 kg
-power 7.5 kva
-documentatie
-400v

dutchmach
metal working machinery
enschede - netherlands

(3 km from the german border) SAY MAK WORKSHOP PRESS TYPE SHP 250 -CILINDERSLAG 400 MM -WERKBREEDTE 1200 X 450 MM -VERPLAATSBAAR CILINDER IS -PRESSURE GAUGE -MET V-BLOKKEN -NOODSTOP -WEIGHT 2250 KG -POWER 7.5 KVA -DOCUMENTATIE -400V DUTCHMACH METAL WORKING MACHINERY ENSCHEDE - NETHERLANDS (3 KM FROM THE GERMAN BORDER)
Vendedor: DutchMach
Año de construcción: usado
Ubicación: Land-pressure: 150 t<br/>stroke: 400 mm<br/>daylight between the columns: 1100 x 400 mm<br/>dayligth: 900 mm<br/>: 250 mm<br/>diameter of piston: 100 mm<br/>liter capacity: 17,1 l<br/>work pressure of hydraulic: max. 250 bar<br/>return speed: 6,9 mm/sec<br/>pre-running speed: 5,8 mm/sec<br/>motor output: 5,5 kw<br/>weight of the machine ca.: 1,2 t<br/>dimensions of the machine ca.: 1,8 x 0,9 x 2,45 m<br/><br/><br/><br/><br/> PRESSURE: 150 T
STROKE: 400 MM
DAYLIGHT BETWEEN THE COLUMNS: 1100 X 400 MM
DAYLIGTH: 900 MM
: 250 MM
DIAMETER OF PISTON: 100 MM
LITER CAPACITY: 17,1 L
WORK PRESSURE OF HYDRAULIC: MAX. 250 BAR
RETURN SPEED: 6,9 MM/SEC
PRE-RUNNING SPEED: 5,8 MM/SEC
MOTOR OUTPUT: 5,5 KW
WEIGHT OF THE MACHINE CA.: 1,2 T
DIMENSIONS OF THE MACHINE CA.: 1,8 X 0,9 X 2,45 M




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Precio: 150.000 €
Ubicación: Land-- used to make magdalenas, muffins in several shapes and other sponge products such as 400g sponge cakes <br>- products can be filled with creams, jam, chocolate<br>- trays for square magdalenas 50 x 50 x 20mm 35g <br>- tray size 800 x 520mm <br>- yom 1995<br>- most parts manufactured by sayoa (spain) <br>- 2000 trays per set on the line <br>- line speed depends on baking time required for product type and required cooling time depends on ambient temperatures <br>- approximately 750kg per hour <br>- trays pass under a paper case dispenser which uses a vacuum system. different feed magazines and deposit heads required for different case dimensions <br>- sayoa batter depositor, servo motor control, 20g up to 80g single dose. for larger deposits the machine can multidrop up to required volume <br>- sugar dusting unit using vibration deposit to dust batter <br>- termopan tunnel oven - gas oil; yom1996 <br>- steel mesh belt. 2.5m wide (3 trays); 18m long cooking area with 1m infeed and 1m outfeed <br>- 1 burner with 4 temperature zones, indirect fired. hot air circulated above and below. cooking time between 6 - 20 minutes possible. usually run at 15 minutes, depending on product.<br>- tray distribution on exit<br>- injector unit for filling chocolate, jam etc. hot oil heated hopper, pneumatic deposit system. different heads required for different products <br>- cooling tower, 9m long x 4.5m high. ambient cooling. 800mm single tray width indexing 5 at a time <br>- pneumatic product tray unloader placing product either into plastic trays which are fed into the line by hand or into a conveyor for individual flowpack wrapping <br>- packaging machinery not included <br>- line requires 4 to 6 operators depending on product and packing<br>- 380 volt, 50hz<br>- still installed but not in production since 2014; very good working condition - USED TO MAKE MAGDALENAS, MUFFINS IN SEVERAL SHAPES AND OTHER SPONGE PRODUCTS SUCH AS 400G SPONGE CAKES
- PRODUCTS CAN BE FILLED WITH CREAMS, JAM, CHOCOLATE
- TRAYS FOR SQUARE MAGDALENAS 50 X 50 X 20MM 35G
- TRAY SIZE 800 X 520MM
- YOM 1995
- MOST PARTS MANUFACTURED BY SAYOA (SPAIN)
- 2000 TRAYS PER SET ON THE LINE
- LINE SPEED DEPENDS ON BAKING TIME REQUIRED FOR PRODUCT TYPE AND REQUIRED COOLING TIME DEPENDS ON AMBIENT TEMPERATURES
- APPROXIMATELY 750KG PER HOUR
- TRAYS PASS UNDER A PAPER CASE DISPENSER WHICH USES A VACUUM SYSTEM. DIFFERENT FEED MAGAZINES AND DEPOSIT HEADS REQUIRED FOR DIFFERENT CASE DIMENSIONS
- SAYOA BATTER DEPOSITOR, SERVO MOTOR CONTROL, 20G UP TO 80G SINGLE DOSE. FOR LARGER DEPOSITS THE MACHINE CAN MULTIDROP UP TO REQUIRED VOLUME
- SUGAR DUSTING UNIT USING VIBRATION DEPOSIT TO DUST BATTER
- TERMOPAN TUNNEL OVEN - GAS OIL; YOM1996
- STEEL MESH BELT. 2.5M WIDE (3 TRAYS); 18M LONG COOKING AREA WITH 1M INFEED AND 1M OUTFEED
- 1 BURNER WITH 4 TEMPERATURE ZONES, INDIRECT FIRED. HOT AIR CIRCULATED ABOVE AND BELOW. COOKING TIME BETWEEN 6 - 20 MINUTES POSSIBLE. USUALLY RUN AT 15 MINUTES, DEPENDING ON PRODUCT.
- TRAY DISTRIBUTION ON EXIT
- INJECTOR UNIT FOR FILLING CHOCOLATE, JAM ETC. HOT OIL HEATED HOPPER, PNEUMATIC DEPOSIT SYSTEM. DIFFERENT HEADS REQUIRED FOR DIFFERENT PRODUCTS
- COOLING TOWER, 9M LONG X 4.5M HIGH. AMBIENT COOLING. 800MM SINGLE TRAY WIDTH INDEXING 5 AT A TIME
- PNEUMATIC PRODUCT TRAY UNLOADER PLACING PRODUCT EITHER INTO PLASTIC TRAYS WHICH ARE FED INTO THE LINE BY HAND OR INTO A CONVEYOR FOR INDIVIDUAL FLOWPACK WRAPPING
- PACKAGING MACHINERY NOT INCLUDED
- LINE REQUIRES 4 TO 6 OPERATORS DEPENDING ON PRODUCT AND PACKING
- 380 VOLT, 50HZ
- STILL INSTALLED BUT NOT IN PRODUCTION SINCE 2014; VERY GOOD WORKING CONDITION
Vendedor: Middle East Trading
Año de construcción: usado
Precio: 150.000 €
Ubicación: Land-- used to make magdalenas & muffins in several shapes. products can be filled with creams, jam, chocolate<br>- tray size 800 x 520mm <br>- line speed depends on baking time required for product type and cooling time required which can vary depending on ambient temperatures <br>- approximately 750kg per hour <br>- most of the line yom 1998. oven: yom is unknown<br>- campallano paper case dispenser <br>- guba batter feed tank with pump (1 available feeds lines 1 and 2), yom 1998<br>- sayoa depositor, pneumatic control<br>- 2 x gonver sugar dusting units, each set up for a different product (yom 2002)<br>- hispal tunnel oven 1.8m wide, 22m long cooking <br>- gas oil with 1 burner and 4 zones, indirect fired<br>- conveyors through filling injector unit, servo control. unit was installed in 2006 but never used except for trials<br>- cooling tower, 9m long x 4.5m high<br>- pneumatic tray unloader and distributor<br>- synchropack flowpack for multipacks, photocell, 1 up knife 25cm jaw width. adjustable folding box. (available separately)<br>- line requires 4 to 6 operators depending on product and packing. <br>- 380 volt, 50hz<br>- still installed but not in production since 2014; very good working condition - USED TO MAKE MAGDALENAS & MUFFINS IN SEVERAL SHAPES. PRODUCTS CAN BE FILLED WITH CREAMS, JAM, CHOCOLATE
- TRAY SIZE 800 X 520MM
- LINE SPEED DEPENDS ON BAKING TIME REQUIRED FOR PRODUCT TYPE AND COOLING TIME REQUIRED WHICH CAN VARY DEPENDING ON AMBIENT TEMPERATURES
- APPROXIMATELY 750KG PER HOUR
- MOST OF THE LINE YOM 1998. OVEN: YOM IS UNKNOWN
- CAMPALLANO PAPER CASE DISPENSER
- GUBA BATTER FEED TANK WITH PUMP (1 AVAILABLE FEEDS LINES 1 AND 2), YOM 1998
- SAYOA DEPOSITOR, PNEUMATIC CONTROL
- 2 X GONVER SUGAR DUSTING UNITS, EACH SET UP FOR A DIFFERENT PRODUCT (YOM 2002)
- HISPAL TUNNEL OVEN 1.8M WIDE, 22M LONG COOKING
- GAS OIL WITH 1 BURNER AND 4 ZONES, INDIRECT FIRED
- CONVEYORS THROUGH FILLING INJECTOR UNIT, SERVO CONTROL. UNIT WAS INSTALLED IN 2006 BUT NEVER USED EXCEPT FOR TRIALS
- COOLING TOWER, 9M LONG X 4.5M HIGH
- PNEUMATIC TRAY UNLOADER AND DISTRIBUTOR
- SYNCHROPACK FLOWPACK FOR MULTIPACKS, PHOTOCELL, 1 UP KNIFE 25CM JAW WIDTH. ADJUSTABLE FOLDING BOX. (AVAILABLE SEPARATELY)
- LINE REQUIRES 4 TO 6 OPERATORS DEPENDING ON PRODUCT AND PACKING.
- 380 VOLT, 50HZ
- STILL INSTALLED BUT NOT IN PRODUCTION SINCE 2014; VERY GOOD WORKING CONDITION
Vendedor: Middle East Trading
Año de construcción: usado
Ubicación: Land-say mak plate shear

type srgm h 1400 x 3

-capaciteit 1400 x 3 mm
-cn touchscreen achteraanslag besturing met various functies
-geknipte plaat gets voor-of achter de machine uit (dat kiest u op touchscreen)
-pneumatic plaathouder eighth
-plaathouders voor
-voetbediening
-noodstop
-400v

dutchmach
metal working machinery
enschede - netherlands

(3 km from the german border) SAY MAK PLATE SHEAR TYPE SRGM H 1400 X 3 -CAPACITEIT 1400 X 3 MM -CN TOUCHSCREEN ACHTERAANSLAG BESTURING MET VARIOUS FUNCTIES -GEKNIPTE PLAAT GETS VOOR-OF ACHTER DE MACHINE UIT (DAT KIEST U OP TOUCHSCREEN) -PNEUMATIC PLAATHOUDER EIGHTH -PLAATHOUDERS VOOR -VOETBEDIENING -NOODSTOP -400V DUTCHMACH METAL WORKING MACHINERY ENSCHEDE - NETHERLANDS (3 KM FROM THE GERMAN BORDER)
Vendedor: DutchMach
Año de construcción: usado
Precio: 7.350 €
Ubicación: Land-say mak round bending machine

type shyam 1550 x 140

-capaciteit 1550 x 4 mm
-electrically adjustable achterrol
-digital uitlezing
-roll harde
-walsen conisch
-bovenrol wegdraaibare
-remmotor
-voetbediening
-noodstop
-documentatie
-400v

price is plus vat

dutchmach
metal working machinery
enschede - netherlands

(3 km from the german border) SAY MAK ROUND BENDING MACHINE TYPE SHYAM 1550 X 140 -CAPACITEIT 1550 X 4 MM -ELECTRICALLY ADJUSTABLE ACHTERROL -DIGITAL UITLEZING -ROLL HARDE -WALSEN CONISCH -BOVENROL WEGDRAAIBARE -REMMOTOR -VOETBEDIENING -NOODSTOP -DOCUMENTATIE -400V PRICE IS PLUS VAT DUTCHMACH METAL WORKING MACHINERY ENSCHEDE - NETHERLANDS (3 KM FROM THE GERMAN BORDER)
Vendedor: DutchMach
Año de construcción: usado
Ubicación: Land-say mak workshop press

type srhp 250

-capaciteit 250 ton
-cilinderslag 400 mm
-werkbreedte 1200 x 1000 mm
-slaginstelling
-pressure gauge
-noodstop
-weight 3450 kg
-power 11 kva
-documentatie
-400v

price is plus vat

dutchmach
metal working machinery
enschede - netherlands

(3 km from the german border) SAY MAK WORKSHOP PRESS TYPE SRHP 250 -CAPACITEIT 250 TON -CILINDERSLAG 400 MM -WERKBREEDTE 1200 X 1000 MM -SLAGINSTELLING -PRESSURE GAUGE -NOODSTOP -WEIGHT 3450 KG -POWER 11 KVA -DOCUMENTATIE -400V PRICE IS PLUS VAT DUTCHMACH METAL WORKING MACHINERY ENSCHEDE - NETHERLANDS (3 KM FROM THE GERMAN BORDER)
Vendedor: DutchMach
Año de construcción: usado
Precio: 4.250 €
Ubicación: Land-say mak workshop press

type shp 100

-capaciteit 100 ton
-cilinderslag 400 mm
-werkbreedte 1000 mm
-verplaatsbaar cilinder is
-pressure gauge
-met v-blokken
-noodstop
-documentatie
-400v

price is plus vat

dutchmach
metal working machinery
enschede - netherlands

(3 km from the german border) SAY MAK WORKSHOP PRESS TYPE SHP 100 -CAPACITEIT 100 TON -CILINDERSLAG 400 MM -WERKBREEDTE 1000 MM -VERPLAATSBAAR CILINDER IS -PRESSURE GAUGE -MET V-BLOKKEN -NOODSTOP -DOCUMENTATIE -400V PRICE IS PLUS VAT DUTCHMACH METAL WORKING MACHINERY ENSCHEDE - NETHERLANDS (3 KM FROM THE GERMAN BORDER)
Vendedor: DutchMach
Año de construcción: usado
Precio: 4.950 €
Ubicación: Land-say mak workshop press

type wp 100

-capaciteit 150 ton
-cilinderslag 400 mm
-werkbreedte 1100 mm
-verplaatsbaar cilinder is
-pressure gauge
-met v-blokken
-noodstop
-documentatie
-400v

price is plus vat

dutchmach
metal working machinery
enschede - netherlands

(3 km from the german border) SAY MAK WORKSHOP PRESS TYPE WP 100 -CAPACITEIT 150 TON -CILINDERSLAG 400 MM -WERKBREEDTE 1100 MM -VERPLAATSBAAR CILINDER IS -PRESSURE GAUGE -MET V-BLOKKEN -NOODSTOP -DOCUMENTATIE -400V PRICE IS PLUS VAT DUTCHMACH METAL WORKING MACHINERY ENSCHEDE - NETHERLANDS (3 KM FROM THE GERMAN BORDER)
Vendedor: DutchMach
Año de construcción: usado
Precio: 1.450 €
Ubicación: Land-technical data:
-manufacturer: say-mak
-country of origin: turkey
-bj. approximately 2014
work range approx. 1000 x 0, 8 mm
-with foot pedal
-electric
weight approx. 300 kg
-roll diameter: 46 mm

TECHNICAL DATA: -MANUFACTURER: SAY-MAK -COUNTRY OF ORIGIN: TURKEY -BJ. APPROXIMATELY 2014 WORK RANGE APPROX. 1000 X 0, 8 MM -WITH FOOT PEDAL -ELECTRIC WEIGHT APPROX. 300 KG -ROLL DIAMETER: 46 MM
Vendedor: Hagen Busch Maschinenhandel
Año de construcción: usado
Precio: 1.950 €
Ubicación: Land-technical data:
-manufacturer: say-mak
-country of origin: turkey
-bj. approximately 2014
work range approx. 1050 x 2, 0 mm
-to the conical rollers
-with foot pedal
-electric
weight approx. 400 kg
-roll diameter: approx. 71 mm
 TECHNICAL DATA: -MANUFACTURER: SAY-MAK -COUNTRY OF ORIGIN: TURKEY -BJ. APPROXIMATELY 2014 WORK RANGE APPROX. 1050 X 2, 0 MM -TO THE CONICAL ROLLERS -WITH FOOT PEDAL -ELECTRIC WEIGHT APPROX. 400 KG -ROLL DIAMETER: APPROX. 71 MM
Vendedor: Hagen Busch Maschinenhandel
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)