13 ofertas

Año de construcción: usado
Ubicación: Land-center height: 275mm, swing in recess/ over bed/ over slide: 700/ 610/ 370mm, turning length: 500-8000mm.  CENTER HEIGHT: 275MM, SWING IN RECESS/ OVER BED/ OVER SLIDE: 700/ 610/ 370MM, TURNING LENGTH: 500-8000MM.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 9.500 €
Ubicación: Land-weight approx.: 5400 kg<br/>dimensions (l x w x h) approx.: 8000 x 3500 x 2200 mm<br/>description: - turning diameter over bed 560 mm,<br> - turning diameter over support 260 mm,<br> - turning length 3000 mm,<br> - control siemens 810 t,<br> - spindle speed 11 to 2240 rpm,<br> - spindle bore 72 mm,<br> - drive power 24 kw,<br> - total power requirement 43 kw,<br> chuck diameter 315 mm, steady rest fixed diameter 20 to 200 mm,<br> steady-rest with rotating diameter 20 to 120 mm WEIGHT APPROX.: 5400 KG
DIMENSIONS (L X W X H) APPROX.: 8000 X 3500 X 2200 MM
DESCRIPTION: - TURNING DIAMETER OVER BED 560 MM,
- TURNING DIAMETER OVER SUPPORT 260 MM,
- TURNING LENGTH 3000 MM,
- CONTROL SIEMENS 810 T,
- SPINDLE SPEED 11 TO 2240 RPM,
- SPINDLE BORE 72 MM,
- DRIVE POWER 24 KW,
- TOTAL POWER REQUIREMENT 43 KW,
CHUCK DIAMETER 315 MM, STEADY REST FIXED DIAMETER 20 TO 200 MM,
STEADY-REST WITH ROTATING DIAMETER 20 TO 120 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 9.500 €
Ubicación: Land-lathe 2 m schaerer 

made in german

german lathe 2 m between points
with motorized advances
with bushing, turret monoculars
high precision lathe with inverted bus system that does not create as much wear.   LATHE 2 M SCHAERER MADE IN GERMAN GERMAN LATHE 2 M BETWEEN POINTS WITH MOTORIZED ADVANCES WITH BUSHING, TURRET MONOCULARS HIGH PRECISION LATHE WITH INVERTED BUS SYSTEM THAT DOES NOT CREATE AS MUCH WEAR.
Vendedor: occasionmachines
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 520 mm<br/>turning diameter over slide rest: 310 mm<br/>turning length: 1000 mm<br/>swing in gap: 580 mm<br/>centre height: 250 mm<br/>bed width: 410 mm<br/>spindle bore: 62 mm<br/>spindle flange: camlock gr. 8 <br/>spindle turning speed range: 24: 9 - 1800 u/min<br/>drive: 15 kw<br/>weight of the machine ca.: 2,75 t<br/>dimensions of the machine ca.: 2,8 x 1,3 x 1,3 m<br/>electric 380 volt:  <br/>chuck: 300 mm<br/>cooling equipment:  <br/>following centers:  <br/>rapid transfer-steel holder  multifix :  <br/>german quality product<br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 520 MM
TURNING DIAMETER OVER SLIDE REST: 310 MM
TURNING LENGTH: 1000 MM
SWING IN GAP: 580 MM
CENTRE HEIGHT: 250 MM
BED WIDTH: 410 MM
SPINDLE BORE: 62 MM
SPINDLE FLANGE: CAMLOCK GR. 8
SPINDLE TURNING SPEED RANGE: 24: 9 - 1800 U/MIN
DRIVE: 15 KW
WEIGHT OF THE MACHINE CA.: 2,75 T
DIMENSIONS OF THE MACHINE CA.: 2,8 X 1,3 X 1,3 M
ELECTRIC 380 VOLT:
CHUCK: 300 MM
COOLING EQUIPMENT:
FOLLOWING CENTERS:
RAPID TRANSFER-STEEL HOLDER MULTIFIX :
GERMAN QUALITY PRODUCT
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 4.500 €
Ubicación: Land-lathe
saeed ud 630
built in 1969
machine number: 16615

round ã? bed 650mm
round ã? over slide 420mm
top width 1000 mm
three-jaw chuck ã?315
multifix
additional gear for slow speeds

more specifications: see machine card the following accessories are present on the machine:

copy setup
faceplate
2. feed
bezel

the machine has the dimensions approx. 3 m x 1.2 m x 1.4 m and a weight of approx. 4,000 kg.

the machine is in perfect condition and works perfectly.

for questions we are anytime even enacted at the disposal.

we look forward to a good cooperation and thank you for your interest in advance. LATHE SAEED UD 630 BUILT IN 1969 MACHINE NUMBER: 16615 ROUND &ATILDE;? BED 650MM ROUND &ATILDE;? OVER SLIDE 420MM TOP WIDTH 1000 MM THREE-JAW CHUCK &ATILDE;?315 MULTIFIX ADDITIONAL GEAR FOR SLOW SPEEDS MORE SPECIFICATIONS: SEE MACHINE CARD THE FOLLOWING ACCESSORIES ARE PRESENT ON THE MACHINE: COPY SETUP FACEPLATE 2. FEED BEZEL THE MACHINE HAS THE DIMENSIONS APPROX. 3 M X 1.2 M X 1.4 M AND A WEIGHT OF APPROX. 4,000 KG. THE MACHINE IS IN PERFECT CONDITION AND WORKS PERFECTLY. FOR QUESTIONS WE ARE ANYTIME EVEN ENACTED AT THE DISPOSAL. WE LOOK FORWARD TO A GOOD COOPERATION AND THANK YOU FOR YOUR INTEREST IN ADVANCE.
Vendedor: W&T EFRA
Año de construcción: usado
Precio: 1.299 €
Ubicación: Land-de Germany, 46325 Borken
Vendedor: Komplett-Konzept Verwertungs GmbH
Año de construcción: usado
Ubicación: Land-
producer: saeed
model: you 500 machines no.: 15104
construction year: ca. 1955 weight: 3000 kg
general information / technical data:
pre-owned lathes made in germany with original multifix tool holder control and spindle system in good condition.
speed: 24 pcs-9, 11, 14, 18, 22, 28, 36, 45, 56, 71, 90, 112, 140, 180, 224, 280, 355, 450, 560, 710, 900, 1120, 1400, 1800u/min
feed: 2 x 96 piece of mechanical transmission and change gears, with thread cutting function of transmission for metric and whitworth -, thread
tip height: 275 mm (160 mm above support) measured values
centre distance: 1750 mm (max. approx. 1500 mm between feed face and quill tailstock)
spindle passage: 60 mm dimensions machine: (w x d x h) 3400 mm x 1650 mm x 1500 mm
power supply/control voltage: 500volt 50 hz / 220v

optional accessories:
&bull; original multifix tool carrier system type "c" with 3 piece tool holders
&bull; 2 piece fixed steady rest different ã? (closed)
&bull; 1 piece 3 jaw power chuck chuck make forkardt ã?250mmmit feed key
&bull; 1 piece faceplate ã? 500 mm
&bull; coolant system
&bull; machine documentation
&bull; various fixed centres and lathe tools
comments:
the machine is with us in the camp under power and ready on the demonstration. the machine funktioniertmit a minor performance loss (approximately 20%) on the 400volt network. the machine has a preparation for a hydraulic copying device, the copy slide is missing!
 PRODUCER: SAEED MODEL: YOU 500 MACHINES NO.: 15104 CONSTRUCTION YEAR: CA. 1955 WEIGHT: 3000 KG GENERAL INFORMATION / TECHNICAL DATA: PRE-OWNED LATHES MADE IN GERMANY WITH ORIGINAL MULTIFIX TOOL HOLDER CONTROL AND SPINDLE SYSTEM IN GOOD CONDITION. SPEED: 24 PCS-9, 11, 14, 18, 22, 28, 36, 45, 56, 71, 90, 112, 140, 180, 224, 280, 355, 450, 560, 710, 900, 1120, 1400, 1800U/MIN FEED: 2 X 96 PIECE OF MECHANICAL TRANSMISSION AND CHANGE GEARS, WITH THREAD CUTTING FUNCTION OF TRANSMISSION FOR METRIC AND WHITWORTH -, THREAD TIP HEIGHT: 275 MM (160 MM ABOVE SUPPORT) MEASURED VALUES CENTRE DISTANCE: 1750 MM (MAX. APPROX. 1500 MM BETWEEN FEED FACE AND QUILL TAILSTOCK) SPINDLE PASSAGE: 60 MM DIMENSIONS MACHINE: (W X D X H) 3400 MM X 1650 MM X 1500 MM POWER SUPPLY/CONTROL VOLTAGE: 500VOLT 50 HZ / 220V OPTIONAL ACCESSORIES: &BULL; ORIGINAL MULTIFIX TOOL CARRIER SYSTEM TYPE "C" WITH 3 PIECE TOOL HOLDERS &BULL; 2 PIECE FIXED STEADY REST DIFFERENT &ATILDE;? (CLOSED) &BULL; 1 PIECE 3 JAW POWER CHUCK CHUCK MAKE FORKARDT &ATILDE;?250MMMIT FEED KEY &BULL; 1 PIECE FACEPLATE &ATILDE;? 500 MM &BULL; COOLANT SYSTEM &BULL; MACHINE DOCUMENTATION &BULL; VARIOUS FIXED CENTRES AND LATHE TOOLS COMMENTS: THE MACHINE IS WITH US IN THE CAMP UNDER POWER AND READY ON THE DEMONSTRATION. THE MACHINE FUNKTIONIERTMIT A MINOR PERFORMANCE LOSS (APPROXIMATELY 20%) ON THE 400VOLT NETWORK. THE MACHINE HAS A PREPARATION FOR A HYDRAULIC COPYING DEVICE, THE COPY SLIDE IS MISSING!
Vendedor: Wiemers AG
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 0800 mm<br/>turning diameter over slide rest: 500 mm<br/>turning length: 1500 mm<br/>centre height: 400 mm<br/>centre distance: 1500 mm<br/>spindle bore: 90 mm<br/>speeds: 28-900 u/min<br/>feeds longitudinal slide: 0,06 - 1,4 mm/u<br/>feeds cross slide: 0,024 - 0,518 mm/u<br/>weight of the machine ca.: 6 t<br/>dimensions of the machine ca.: 4,5 x 2,5 x 2,2 m<br/>voltage: 380 v<br/>main drive: 14,5 kw<br/>we supply one faceplate, one fixed steady rest and one multifix tool holder <br/>with one holder along with the machine. there is one set of change gears <br/>mounted on the reverse gear box.<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 0800 MM
TURNING DIAMETER OVER SLIDE REST: 500 MM
TURNING LENGTH: 1500 MM
CENTRE HEIGHT: 400 MM
CENTRE DISTANCE: 1500 MM
SPINDLE BORE: 90 MM
SPEEDS: 28-900 U/MIN
FEEDS LONGITUDINAL SLIDE: 0,06 - 1,4 MM/U
FEEDS CROSS SLIDE: 0,024 - 0,518 MM/U
WEIGHT OF THE MACHINE CA.: 6 T
DIMENSIONS OF THE MACHINE CA.: 4,5 X 2,5 X 2,2 M
VOLTAGE: 380 V
MAIN DRIVE: 14,5 KW
WE SUPPLY ONE FACEPLATE, ONE FIXED STEADY REST AND ONE MULTIFIX TOOL HOLDER
WITH ONE HOLDER ALONG WITH THE MACHINE. THERE IS ONE SET OF CHANGE GEARS
MOUNTED ON THE REVERSE GEAR BOX.




Vendedor: Wirths GmbH, Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 500 mm<br/>turning diameter over slide rest: - mm<br/>turning length: 1000 mm<br/>centre height: 260 mm<br/>hollow spindle diameter: 60 mm<br/>3-jaw-chuck diameter: 315 mm<br/>turning speeds: 9 - 1800 u/min<br/>quick change tool holder: parat <br/>weight of the machine ca.: 2,8 t<br/>3 changeable cassettes included<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 500 MM
TURNING DIAMETER OVER SLIDE REST: - MM
TURNING LENGTH: 1000 MM
CENTRE HEIGHT: 260 MM
HOLLOW SPINDLE DIAMETER: 60 MM
3-JAW-CHUCK DIAMETER: 315 MM
TURNING SPEEDS: 9 - 1800 U/MIN
QUICK CHANGE TOOL HOLDER: PARAT
WEIGHT OF THE MACHINE CA.: 2,8 T
3 CHANGEABLE CASSETTES INCLUDED




Vendedor: WeMa A. Pigge GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 660 mm<br/>turning length: 1500 mm<br/>control: siemens 820 t <br/>turning speeds: 3000 u/min<br/>turning diameter over slide: 355 mm<br/>centre height: 335 mm<br/>centre distance: 1650 mm<br/>spindle bore: 72 mm<br/>total power requirement: 23 kw<br/>weight of the machine ca.: 4,8 t<br/>dimensions of the machine ca.: 4,0x2,0x2,3 m<br/>quick change holder multifix c<br/>3-jaw chuck<br/>toolholder<br/>steady<br/><br/><br/><br/><br/> TURNING DIAMETER: 660 MM
TURNING LENGTH: 1500 MM
CONTROL: SIEMENS 820 T
TURNING SPEEDS: 3000 U/MIN
TURNING DIAMETER OVER SLIDE: 355 MM
CENTRE HEIGHT: 335 MM
CENTRE DISTANCE: 1650 MM
SPINDLE BORE: 72 MM
TOTAL POWER REQUIREMENT: 23 KW
WEIGHT OF THE MACHINE CA.: 4,8 T
DIMENSIONS OF THE MACHINE CA.: 4,0X2,0X2,3 M
QUICK CHANGE HOLDER MULTIFIX C
3-JAW CHUCK
TOOLHOLDER
STEADY




Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 520 mm<br/>turning diameter over slide rest: 310 mm<br/>turning length: 2500 mm<br/>swing in gap: 580 mm<br/>spindle bore: 62 mm<br/>spindle turning speed range: 9 - 1800 u/min<br/>feeds - longitudinal: 0,07 - 1,02 mm/u<br/>feeds - cross: 0,04 - 0,6 mm/u<br/>main drive motor: 15 kw<br/>total power requirement:  kw<br/>weight of the machine ca.: 3,6 t<br/>dimensions of the machine ca.: 4,8 x 1,4 x 1,6 m<br/>* support rapid traverse<br/>* quick-change steel holder<br/>* 3-jaw chuck, diameter 400 mm<br/>* faceplate, diameter 500 mm<br/>* steady rest, max. passage approx. 300 mm<br/>* steady rest, max. passage 160 mm<br/>* cooling system<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 520 MM
TURNING DIAMETER OVER SLIDE REST: 310 MM
TURNING LENGTH: 2500 MM
SWING IN GAP: 580 MM
SPINDLE BORE: 62 MM
SPINDLE TURNING SPEED RANGE: 9 - 1800 U/MIN
FEEDS - LONGITUDINAL: 0,07 - 1,02 MM/U
FEEDS - CROSS: 0,04 - 0,6 MM/U
MAIN DRIVE MOTOR: 15 KW
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 3,6 T
DIMENSIONS OF THE MACHINE CA.: 4,8 X 1,4 X 1,6 M
* SUPPORT RAPID TRAVERSE
* QUICK-CHANGE STEEL HOLDER
* 3-JAW CHUCK, DIAMETER 400 MM
* FACEPLATE, DIAMETER 500 MM
* STEADY REST, MAX. PASSAGE APPROX. 300 MM
* STEADY REST, MAX. PASSAGE 160 MM
* COOLING SYSTEM




Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-turning diameter: 560 mm<br/>turning length: 3000 mm<br/>control: siemens 810 t <br/>turning speeds: 11 - 2240 u/min<br/>turning diameter over bed slide: 260 <br/>spindle bore: 72 mm<br/>total power requirement: 43 kw<br/>weight of the machine ca.: 5,4 t<br/>dimensions of the machine ca.: 8x3,5x2,2 m<br/><br/><br/><br/><br/> TURNING DIAMETER: 560 MM
TURNING LENGTH: 3000 MM
CONTROL: SIEMENS 810 T
TURNING SPEEDS: 11 - 2240 U/MIN
TURNING DIAMETER OVER BED SLIDE: 260
SPINDLE BORE: 72 MM
TOTAL POWER REQUIREMENT: 43 KW
WEIGHT OF THE MACHINE CA.: 5,4 T
DIMENSIONS OF THE MACHINE CA.: 8X3,5X2,2 M




Vendedor: Emuk Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-<br>center height: 0 mm<br>center distance: 400 mm<br>spindle bore: 0 mm <br><p>make schaerer 112</p>
<p>type uda 1120 x 4</p>
<p>year 70 er</p>
<p>conventionel lathe centre height (mm)swing = 1.120</p>
<p>center distance (mm) dbc = 4.000</p>
<p>spindle bore 4 chuck 1.000</p>
<p>conical turn attachment</p>
<p>
CENTER HEIGHT: 0 MM
CENTER DISTANCE: 400 MM
SPINDLE BORE: 0 MM

MAKE SCHAERER 112

TYPE UDA 1120 X 4

YEAR 70 ER

CONVENTIONEL LATHE CENTRE HEIGHT (MM)SWING = 1.120

CENTER DISTANCE (MM) DBC = 4.000

SPINDLE BORE 4 CHUCK 1.000

CONICAL TURN ATTACHMENT

Vendedor: Mach4metal
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more SCHAERER types: