143 ofertas

Año de construcción: usado
Ubicación: Land--1 cross slide 70.45,
-1 bed 70.12, 
-1 head stock 70-31 (mounted on bearings – last generation) - spindle w12,
-1 manual lever-operated collet quick-closing attachement 70-30.600,
-1 « fr. vögtle » 2 speed motor (1500/3000 rpm), power suppley 380[v],
-1 belt,
-1 multifix type a-a quick-change tool post,
-1 multifix type a-a tool holder.

price vat excluded, on request.

shipping in europe is possible.


more details on request. -1 CROSS SLIDE 70.45, -1 BED 70.12, -1 HEAD STOCK 70-31 (MOUNTED ON BEARINGS – LAST GENERATION) - SPINDLE W12, -1 MANUAL LEVER-OPERATED COLLET QUICK-CLOSING ATTACHEMENT 70-30.600, -1 « FR. VöGTLE » 2 SPEED MOTOR (1500/3000 RPM), POWER SUPPLEY 380[V], -1 BELT, -1 MULTIFIX TYPE A-A QUICK-CHANGE TOOL POST, -1 MULTIFIX TYPE A-A TOOL HOLDER. PRICE VAT EXCLUDED, ON REQUEST. SHIPPING IN EUROPE IS POSSIBLE. MORE DETAILS ON REQUEST.
Vendedor: SARL Kraffter
Año de construcción: usado
Precio: 280 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 4.500 €
Ubicación: Land-m
type of machine control and lathe make schaublin type 102 vm built 1970 control type conventional storage france country of origin switzerland delivery immediately cargo base stock haguenau france technical details

turning diameter over bed 305 mm turning diameter over support 150 mm turning length 450 mm centre height over bed 102 mm top width 450 mm spindle bore 20 mm speed range 3000 rpm power - spindle motor 1,5 kw taper in the tailstock quill mk 2 quill diameter 36 mm quill stroke 60 mm operating voltage 380 v total power 3 kw machine weight approx. 650 kg space requirement approx. 1760 x 600 1230 m additional information

super condition
 multi fix holder feed dia 100 mm
 chip pliers system
 uberholt 1997 duch scemama
 tip height 102 mm
 top width 450 mm
 leit.-/ spindle
 collets w20 available
 rotational speed: approx. 210 3000 rpm
 reduction gear

links.-right rotation
 2-stage drive
 l x w x h: ca. 1760 x 595 x 1230 mm
 weight: approx. 650 kg M TYPE OF MACHINE CONTROL AND LATHE MAKE SCHAUBLIN TYPE 102 VM BUILT 1970 CONTROL TYPE CONVENTIONAL STORAGE FRANCE COUNTRY OF ORIGIN SWITZERLAND DELIVERY IMMEDIATELY CARGO BASE STOCK HAGUENAU FRANCE TECHNICAL DETAILS TURNING DIAMETER OVER BED 305 MM TURNING DIAMETER OVER SUPPORT 150 MM TURNING LENGTH 450 MM CENTRE HEIGHT OVER BED 102 MM TOP WIDTH 450 MM SPINDLE BORE 20 MM SPEED RANGE 3000 RPM POWER - SPINDLE MOTOR 1,5 KW TAPER IN THE TAILSTOCK QUILL MK 2 QUILL DIAMETER 36 MM QUILL STROKE 60 MM OPERATING VOLTAGE 380 V TOTAL POWER 3 KW MACHINE WEIGHT APPROX. 650 KG SPACE REQUIREMENT APPROX. 1760 X 600 1230 M ADDITIONAL INFORMATION SUPER CONDITION MULTI FIX HOLDER FEED DIA 100 MM CHIP PLIERS SYSTEM UBERHOLT 1997 DUCH SCEMAMA TIP HEIGHT 102 MM TOP WIDTH 450 MM LEIT.-/ SPINDLE COLLETS W20 AVAILABLE ROTATIONAL SPEED: APPROX. 210 3000 RPM REDUCTION GEAR LINKS.-RIGHT ROTATION 2-STAGE DRIVE L X W X H: CA. 1760 X 595 X 1230 MM WEIGHT: APPROX. 650 KG
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Precio: 250 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 12.500 €
Ubicación: Land-
description

universal lathe of brand scvhaublin suitable for the tool, jig and fixture construction, training and mold

flow diameter: 135 mm
    turning length: 650 mm

technical data

circular diameter 135 mm
    top width 650 mm
    spindle bore 40 mm
    tailstock mk 4
    tool station multifix
    speed 55-3000 rpm
    weight 1300kg
    connection 380v

DESCRIPTION UNIVERSAL LATHE OF BRAND SCVHAUBLIN SUITABLE FOR THE TOOL, JIG AND FIXTURE CONSTRUCTION, TRAINING AND MOLD FLOW DIAMETER: 135 MM TURNING LENGTH: 650 MM TECHNICAL DATA CIRCULAR DIAMETER 135 MM TOP WIDTH 650 MM SPINDLE BORE 40 MM TAILSTOCK MK 4 TOOL STATION MULTIFIX SPEED 55-3000 RPM WEIGHT 1300KG CONNECTION 380V
Vendedor: AWM GmbH
Año de construcción: usado
Precio: 185 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-schaublin 70 high precision lathe with accessories:

-70-31 / 1 headstock w12 type spindle,
-70-10 / 1 bed,
-70-10 / 1 chip tray for bed 70-10,
-70-65 / 1 screw-operated tailstock,
-70-32.030 / 1 manual drawbar for w12 type collets,
-70-30.600 / 1 manual lever-operated quick-closing attachement,
-70-45 / 1 screw operated-carriage,
-70-10.100 / 1 rod for fixing of the carriage,
-1 three-phase motor 750/1500 [rpm],
-71006 + 71070 / 1 commutating and reversing switch,
-102-95.100  / 1 belt-tightening attachement with drive pulley 70-95.222 for milling and grinding attachement,
-70-95.120 / 1 endless belt Ø6 [mm] for milling and grinding attachements – new,
-1 milling attachement a.s. chappuis (2035 corcelles, switzerland) spindle type w12,
-70-87.550 / 1 grinding attachement,
-81 collets type w12 from Ø0.20 to 12.00 [mm],
-84-54.000 / 4 internal-gripping collets, finished,
-84-54.010 / 3 internal-gripping collets, unmachined,
-84-50.300 / 12 expanding arbors (Ø 7.2 – 8 – 11 – 12.4 – 12.6 – 13 – 14 – 15 – 17 mm),
-84-50.000 / 7 arbors with interchangeable expanding cast-iron bushes  (Ø 18 – 21 – 24 – 25 – 28 – 29.5 – 30 mm),
-82-50.006 / 30 external-gripping collets type w12, finished Ø33 [mm],
-82-50.007 / 6 external-gripping collets type w12, finished Ø49 [mm],
-82-50.008 / 10 external-gripping collets type w12, finished Ø65 [mm],
-82-50.009 / 5 external-gripping collets type w12, finished Ø81 [mm],
-82-50.010 / 5 external-gripping collets type w12, finished Ø97 [mm],
-70-25.221 / 4 closers for type w12 external-gripping collets sizes 2, 3, 4, 5,
-70-25.180 / 1 protective nut for spindle nose,
-1 faceplate Ø138 [mm] with 3 radial t slots of 7 [mm] and 21 m6 tapped holes,
-1 concentric 3 jaw chuck Ø80 [mm] pratt burnerd for internal and external gripping, mounted on adapter for spindle nose, with 1 safety ring and 1 key,
-1 set of 3 internal hardened jaws for Ø80 [mm] pratt burnerd chuck,
-1 set of 3 external hardened jaws for Ø80 [mm] pratt burnerd chuck,
-70-46.200 / 1 quick-clamping turret multifix original suisse type aa and its 2 locking levers,
-6 tools-holders multifix original suisse type aa,
-70-74.100 / 1 drill chuck on arbor, shank taper 2°, chuck capacity from 0.3 to 6.4 [mm] with 1 locking lever,
-70-74.041 / 1 revolving male center, 60° (with taper roller bearing), shank taper 2°,
-70-74.021 / 1 femalle center, 60°, shank taper 2°,
-70-74.011 / 1 half male center, 60°, shank taper 2°,
-70-25.001 / 1 male center, 60° type w12,
-2 chucks 6 jaws Ø100 [mm] type b for external gripping type w12,
-1 workbench thurmetall (switzerland) 1500 x 700 [mm], 50 [mm]beechwood bench – new,
-1 cabinet thurmetall (switzerland), 5 drawers – new,
-1 aluminium waldmann « taneo » lamp, high quality led lightning – new,
-1 magnifying glass waldmann – new,
-1 electrical cabinet, low voltage command 24 [v].

machine serviced and in excellent condition.


price vat excluded, on request.

shipping worldwide is possible.


more pictures and details on request. SCHAUBLIN 70 HIGH PRECISION LATHE WITH ACCESSORIES: -70-31 / 1 HEADSTOCK W12 TYPE SPINDLE, -70-10 / 1 BED, -70-10 / 1 CHIP TRAY FOR BED 70-10, -70-65 / 1 SCREW-OPERATED TAILSTOCK, -70-32.030 / 1 MANUAL DRAWBAR FOR W12 TYPE COLLETS, -70-30.600 / 1 MANUAL LEVER-OPERATED QUICK-CLOSING ATTACHEMENT, -70-45 / 1 SCREW OPERATED-CARRIAGE, -70-10.100 / 1 ROD FOR FIXING OF THE CARRIAGE, -1 THREE-PHASE MOTOR 750/1500 [RPM], -71006 + 71070 / 1 COMMUTATING AND REVERSING SWITCH, -102-95.100 / 1 BELT-TIGHTENING ATTACHEMENT WITH DRIVE PULLEY 70-95.222 FOR MILLING AND GRINDING ATTACHEMENT, -70-95.120 / 1 ENDLESS BELT Ø6 [MM] FOR MILLING AND GRINDING ATTACHEMENTS – NEW, -1 MILLING ATTACHEMENT A.S. CHAPPUIS (2035 CORCELLES, SWITZERLAND) SPINDLE TYPE W12, -70-87.550 / 1 GRINDING ATTACHEMENT, -81 COLLETS TYPE W12 FROM Ø0.20 TO 12.00 [MM], -84-54.000 / 4 INTERNAL-GRIPPING COLLETS, FINISHED, -84-54.010 / 3 INTERNAL-GRIPPING COLLETS, UNMACHINED, -84-50.300 / 12 EXPANDING ARBORS (Ø 7.2 – 8 – 11 – 12.4 – 12.6 – 13 – 14 – 15 – 17 MM), -84-50.000 / 7 ARBORS WITH INTERCHANGEABLE EXPANDING CAST-IRON BUSHES (Ø 18 – 21 – 24 – 25 – 28 – 29.5 – 30 MM), -82-50.006 / 30 EXTERNAL-GRIPPING COLLETS TYPE W12, FINISHED Ø33 [MM], -82-50.007 / 6 EXTERNAL-GRIPPING COLLETS TYPE W12, FINISHED Ø49 [MM], -82-50.008 / 10 EXTERNAL-GRIPPING COLLETS TYPE W12, FINISHED Ø65 [MM], -82-50.009 / 5 EXTERNAL-GRIPPING COLLETS TYPE W12, FINISHED Ø81 [MM], -82-50.010 / 5 EXTERNAL-GRIPPING COLLETS TYPE W12, FINISHED Ø97 [MM], -70-25.221 / 4 CLOSERS FOR TYPE W12 EXTERNAL-GRIPPING COLLETS SIZES 2, 3, 4, 5, -70-25.180 / 1 PROTECTIVE NUT FOR SPINDLE NOSE, -1 FACEPLATE Ø138 [MM] WITH 3 RADIAL T SLOTS OF 7 [MM] AND 21 M6 TAPPED HOLES, -1 CONCENTRIC 3 JAW CHUCK Ø80 [MM] PRATT BURNERD FOR INTERNAL AND EXTERNAL GRIPPING, MOUNTED ON ADAPTER FOR SPINDLE NOSE, WITH 1 SAFETY RING AND 1 KEY, -1 SET OF 3 INTERNAL HARDENED JAWS FOR Ø80 [MM] PRATT BURNERD CHUCK, -1 SET OF 3 EXTERNAL HARDENED JAWS FOR Ø80 [MM] PRATT BURNERD CHUCK, -70-46.200 / 1 QUICK-CLAMPING TURRET MULTIFIX ORIGINAL SUISSE TYPE AA AND ITS 2 LOCKING LEVERS, -6 TOOLS-HOLDERS MULTIFIX ORIGINAL SUISSE TYPE AA, -70-74.100 / 1 DRILL CHUCK ON ARBOR, SHANK TAPER 2°, CHUCK CAPACITY FROM 0.3 TO 6.4 [MM] WITH 1 LOCKING LEVER, -70-74.041 / 1 REVOLVING MALE CENTER, 60° (WITH TAPER ROLLER BEARING), SHANK TAPER 2°, -70-74.021 / 1 FEMALLE CENTER, 60°, SHANK TAPER 2°, -70-74.011 / 1 HALF MALE CENTER, 60°, SHANK TAPER 2°, -70-25.001 / 1 MALE CENTER, 60° TYPE W12, -2 CHUCKS 6 JAWS Ø100 [MM] TYPE B FOR EXTERNAL GRIPPING TYPE W12, -1 WORKBENCH THURMETALL (SWITZERLAND) 1500 X 700 [MM], 50 [MM]BEECHWOOD BENCH – NEW, -1 CABINET THURMETALL (SWITZERLAND), 5 DRAWERS – NEW, -1 ALUMINIUM WALDMANN « TANEO » LAMP, HIGH QUALITY LED LIGHTNING – NEW, -1 MAGNIFYING GLASS WALDMANN – NEW, -1 ELECTRICAL CABINET, LOW VOLTAGE COMMAND 24 [V]. MACHINE SERVICED AND IN EXCELLENT CONDITION. PRICE VAT EXCLUDED, ON REQUEST. SHIPPING WORLDWIDE IS POSSIBLE. MORE PICTURES AND DETAILS ON REQUEST.
Vendedor: SARL Kraffter
Año de construcción: usado
Ubicación: Land-grinding diameter max.: 0,1 - 6 mm mm<br/>regulating wheel width: 60 mm<br/>max. width of grinding wheel: 40 mm<br/>weight of the machine ca.: 0,5 t<br/>dimensions of the machine ca.:  m<br/>eso100 - präzisions-spitzenlos-rundschleifmaschine fu¨r miniatur- und<br/>kleinteile<br/><br/>-schleifbereich Ø 0,1 - 6 mm<br/>-spitzenloses durchgangsschleifen sowie einstechschleifen<br/>-schleifscheiben Ø 100 mm / regelscheiben Ø 60 mm -schleifscheibenbreite 40 mm<br/>-geringer platzbedarf<br/><br/>eso 100 - technische hauptdaten<br/>schleifbereich mit standardauflagen ?v?-form: 0.1 ? 6.0 mm<br/>schleifscheibe 100 x 40 x 25mm regelscheibe 60 x 40 x 25 mm <br/>schleifscheibendrehzahl 3?000-6?000 1/min regelscheibendrehzahl 0 ? 300 1/min <br/>antriebsleistung / schleifscheibe 1.1 kw antriebsleistung / regelscheibe 0.25 kw<br/>el. ausrüstung 3 x 400 volt 50 hz<br/><br/><br/><br/><br/> GRINDING DIAMETER MAX.: 0,1 - 6 MM MM
REGULATING WHEEL WIDTH: 60 MM
MAX. WIDTH OF GRINDING WHEEL: 40 MM
WEIGHT OF THE MACHINE CA.: 0,5 T
DIMENSIONS OF THE MACHINE CA.: M
ESO100 - PRäZISIONS-SPITZENLOS-RUNDSCHLEIFMASCHINE FU¨R MINIATUR- UND
KLEINTEILE

-SCHLEIFBEREICH Ø 0,1 - 6 MM
-SPITZENLOSES DURCHGANGSSCHLEIFEN SOWIE EINSTECHSCHLEIFEN
-SCHLEIFSCHEIBEN Ø 100 MM / REGELSCHEIBEN Ø 60 MM -SCHLEIFSCHEIBENBREITE 40 MM
-GERINGER PLATZBEDARF

ESO 100 - TECHNISCHE HAUPTDATEN
SCHLEIFBEREICH MIT STANDARDAUFLAGEN ?V?-FORM: 0.1 ? 6.0 MM
SCHLEIFSCHEIBE 100 X 40 X 25MM REGELSCHEIBE 60 X 40 X 25 MM
SCHLEIFSCHEIBENDREHZAHL 3?000-6?000 1/MIN REGELSCHEIBENDREHZAHL 0 ? 300 1/MIN
ANTRIEBSLEISTUNG / SCHLEIFSCHEIBE 1.1 KW ANTRIEBSLEISTUNG / REGELSCHEIBE 0.25 KW
EL. AUSRüSTUNG 3 X 400 VOLT 50 HZ




Vendedor: Emuk Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 37.500 €
Ubicación: Land-cnc lathe tornos - schaublin 180 r-tm spindle a2-6 CNC LATHE TORNOS - SCHAUBLIN 180 R-TM SPINDLE A2-6" (Ø68 MM), C AXIS, ROTATING TURNING TOOLS : -YEAR : 2001, -CN FANUC 18I, -SPINDLE A2-6": Ø 68 THROUGHT BORE [MM], -C AXIS : 0.001° (360000 POSITIONS), -12 STATION REVOLVER TURRET DUPLOMATIC BSV-N 160, -STANDARDIZED FIXING OF TOOL HOLDERS : VDI 30, -NUMBER OF ROTATING TOOL STATIONS : 6, -TURNING TOOLS SPINDLE SPEED : 30 TO 5000 [RPM], -MAXIMUM TOOL SIZE : 20 X 20 [MM], -INTEGRATED COOLING AND INDEXING IN BOTH ROTATION DIRECTION : YES, -HEIGHT OF CENTERS OVER BED : 280[MM], -HEIGHT OF CENTERS OVER CARRIAGE : 83 [MM], -MAXIMUM TURNING DIAMETER : 270 [MM], -MAXIMUM TURNING LENGHT : 635 [MM], -SPINDLE SPEED : 50 TO 4000 [RPM], -SPINDLE MOTOR POWER : 18.5 [KW], -TRANSVERSE STROKE, X AXIS: 231 [MM], -RESOLUTION, X AXIS (ON RADIUS) : 0.0005 [MM], -LONGITUDINAL STROKE, Z AXIS : 721 [MM], -RéSOLUTION, Z AXIS : 0.001 [MM], -TAIL STOCK OPERATED PNEUMATIC, SPINDLE TAPER : MORSE 5, -EXTERNAL Ø OF THE TAIL STOCK SPINDLE : 72 [MM], -TAILS STOCK SPINDLE STROKE : 80 [MM], -ADJUSTABLE PRESSING FORCE : 25 TO 440 [DAN], -COOLANT TANK CAPACITY : 120 [L], -COOLANT PUMP CAPACITY : 8 [L/MIN], -COOLANT PUMP PRESSURE : 5 [BAR]. -OVERALL DIMENSIONS : 2300 (LENGHT) X 1460 (DEPTH) X 1676 (HEIGHT) [MM], -APPROXIMATE NET WEIGHT OF THE MACHINE: 2740 [KG]. EQUIPEMENTS INCLUS: -5 TURNING TOOL HOLDERS VDI 30, -2 AXIAL ROTATING TURNING TOOL HOLDERS VDI 30, -2 ANGULAR/RADIAL ROTATING TURNING TOOL HOLDERS VDI 30, -1 COLLET CHUCK SMW AUTOBLOK KSZ FOR F60 COLLETS. MACHINE OVERHAULED (GEOMETRY, MéCHANIC, ELECTRICITY, PNEUMATIC). COMPLETE LISTING OF THE WORK DONE ON THE MACHINE ON DEMAND. MACHINE VISIBLE UNDER POWER. PRICE : 37,500.00€ VAT EXCL. EX WORKS LOADED ON TRUCK 73520 SAINT BéRON, FRANCE. SHIPPING POSSIBLE IN EUROPE AND WORLDWIDE. INSTALLATION AND FORMATION POSSIBLE IN FRANCE. MORE PICTURES AND TECHNICAL DETAILS ON DEMAND.
Vendedor: SARL Kraffter
Año de construcción: usado
Ubicación: Land-grinding diameter max.: 6 mm<br/>regulating wheel width: 60 mm<br/>max. width of grinding wheel: 40 mm<br/>grinding wheels: 100 mm max<br/>weight of the machine ca.: 0,5 t<br/>dimensions of the machine ca.: 1x0,8x1,2 m<br/>eso100 - pra¨zisions-spitzenlos-rundschleifmaschine fu¨r miniatur- und <br/>kleinteile<br/><br/>-schleifbereich Ø 0,1 - 6 mm<br/>-spitzenloses durchgangsschleifen sowie einstechschleifen<br/>-schleifscheiben Ø 100 mm / regelscheiben Ø 60 mm -schleifscheibenbreite 40 mm<br/>-geringer platzbedarf<br/><br/>eso 100 - technische hauptdaten<br/>schleifbereich mit standardauflagen ?v?-form: 0.1 ? 6.0 mm<br/>schleifscheibe 100 x 40 x 25mm regelscheibe 60 x 40 x 25 mm <br/>schleifscheibendrehzahl 3?000-6?000 1/min regelscheibendrehzahl 0 ? 300 1/min <br/>antriebsleistung / schleifscheibe 1.1 kw antriebsleistung / regelscheibe 0.25 kw<br/>el. ausrüstung 3 x 400 volt 50 hz<br/><br/><br/><br/><br/> GRINDING DIAMETER MAX.: 6 MM
REGULATING WHEEL WIDTH: 60 MM
MAX. WIDTH OF GRINDING WHEEL: 40 MM
GRINDING WHEELS: 100 MM MAX
WEIGHT OF THE MACHINE CA.: 0,5 T
DIMENSIONS OF THE MACHINE CA.: 1X0,8X1,2 M
ESO100 - PRA¨ZISIONS-SPITZENLOS-RUNDSCHLEIFMASCHINE FU¨R MINIATUR- UND
KLEINTEILE

-SCHLEIFBEREICH Ø 0,1 - 6 MM
-SPITZENLOSES DURCHGANGSSCHLEIFEN SOWIE EINSTECHSCHLEIFEN
-SCHLEIFSCHEIBEN Ø 100 MM / REGELSCHEIBEN Ø 60 MM -SCHLEIFSCHEIBENBREITE 40 MM
-GERINGER PLATZBEDARF

ESO 100 - TECHNISCHE HAUPTDATEN
SCHLEIFBEREICH MIT STANDARDAUFLAGEN ?V?-FORM: 0.1 ? 6.0 MM
SCHLEIFSCHEIBE 100 X 40 X 25MM REGELSCHEIBE 60 X 40 X 25 MM
SCHLEIFSCHEIBENDREHZAHL 3?000-6?000 1/MIN REGELSCHEIBENDREHZAHL 0 ? 300 1/MIN
ANTRIEBSLEISTUNG / SCHLEIFSCHEIBE 1.1 KW ANTRIEBSLEISTUNG / REGELSCHEIBE 0.25 KW
EL. AUSRüSTUNG 3 X 400 VOLT 50 HZ




Vendedor: Emuk Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 19.000 €
Ubicación: Land-
machine type cnc lathe - inclined bed machine make schaublin type 110 cnc built 1998 control type cnc storage france country of origin switzerland delivery immediately cargo base stock technical details

turning diameter 420 mm turning length 300 mm control fanuc 18 t c-axis 0.001 degree speed 1750-5000 r/min turret 8 powered tools turning diameter over bed 420 mm additional information

turning diameter over bed 420 mm
 spindle bore 32 mm
 turning diameter 120 mm
 sled:
 longitudinal travel (z axis) 300 mm
 plan travel (x-axis) 180 mm
 c axis live tools turret sled: number 1
 number of positions revolver 8
 driven tools revolver 8
 spindle retainer:
 camlock
 spindle speeds:
 continuously variable
 30 rpm
 up to 5000 rpm
 without reitstock-:

feeds:
 continuously variable
 length of 0 mm/min
 up to 10000 mm/min
 map of 0 mm/min
 up to 6000 mm/min
 rapid traverse 12 m / min
 connection 50 hz 3 x 380 volt
 kw spindle motor 150 100%
 total power consumption 18 kva
 machine weight 3250 kg

miscellaneous accessories:
 clamping tongs recording
 lighting
 coolant system
 splash guard cabin complete
 central lubrication system
 electronic handwheel
 interface rs 232
 workpiece remover
 chip conveyor / / tensioning clamp device
 10 piece tool holder
 5 powered holder
 rod loader samsys 3000 MACHINE TYPE CNC LATHE - INCLINED BED MACHINE MAKE SCHAUBLIN TYPE 110 CNC BUILT 1998 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN SWITZERLAND DELIVERY IMMEDIATELY CARGO BASE STOCK TECHNICAL DETAILS TURNING DIAMETER 420 MM TURNING LENGTH 300 MM CONTROL FANUC 18 T C-AXIS 0.001 DEGREE SPEED 1750-5000 R/MIN TURRET 8 POWERED TOOLS TURNING DIAMETER OVER BED 420 MM ADDITIONAL INFORMATION TURNING DIAMETER OVER BED 420 MM SPINDLE BORE 32 MM TURNING DIAMETER 120 MM SLED: LONGITUDINAL TRAVEL (Z AXIS) 300 MM PLAN TRAVEL (X-AXIS) 180 MM C AXIS LIVE TOOLS TURRET SLED: NUMBER 1 NUMBER OF POSITIONS REVOLVER 8 DRIVEN TOOLS REVOLVER 8 SPINDLE RETAINER: CAMLOCK SPINDLE SPEEDS: CONTINUOUSLY VARIABLE 30 RPM UP TO 5000 RPM WITHOUT REITSTOCK-: FEEDS: CONTINUOUSLY VARIABLE LENGTH OF 0 MM/MIN UP TO 10000 MM/MIN MAP OF 0 MM/MIN UP TO 6000 MM/MIN RAPID TRAVERSE 12 M / MIN CONNECTION 50 HZ 3 X 380 VOLT KW SPINDLE MOTOR 150 100% TOTAL POWER CONSUMPTION 18 KVA MACHINE WEIGHT 3250 KG MISCELLANEOUS ACCESSORIES: CLAMPING TONGS RECORDING LIGHTING COOLANT SYSTEM SPLASH GUARD CABIN COMPLETE CENTRAL LUBRICATION SYSTEM ELECTRONIC HANDWHEEL INTERFACE RS 232 WORKPIECE REMOVER CHIP CONVEYOR / / TENSIONING CLAMP DEVICE 10 PIECE TOOL HOLDER 5 POWERED HOLDER ROD LOADER SAMSYS 3000
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-turning diameter:115 mm<br/>turning length:325 mm<br/>control: <br/>turning diameter over bed:200 mm<br/>spindle passage:24 mm<br/>tailstock quill taper mt:3 <br/>turning speeds:5000 1/min<br/>rapid power traverse in x-and z direction:7,5 m/min<br/>turret (x-stations):8 (vdi 20) <br/>spindle motor:7,5 / 5,5 kw<br/>total power requirement: kva<br/>weight of the machine ca.:1,5 t<br/>machine dimensions lxwxh:1,7 x 1,25 x 1,66 m<br/><br/>multifix b toolholer system, 3 jaw chuck, 10 pcs. toolholders  approx. 48.900 working hours (machine on) TURNING DIAMETER:115 MM
TURNING LENGTH:325 MM
CONTROL:
TURNING DIAMETER OVER BED:200 MM
SPINDLE PASSAGE:24 MM
TAILSTOCK QUILL TAPER MT:3
TURNING SPEEDS:5000 1/MIN
RAPID POWER TRAVERSE IN X-AND Z DIRECTION:7,5 M/MIN
TURRET (X-STATIONS):8 (VDI 20)
SPINDLE MOTOR:7,5 / 5,5 KW
TOTAL POWER REQUIREMENT: KVA
WEIGHT OF THE MACHINE CA.:1,5 T
MACHINE DIMENSIONS LXWXH:1,7 X 1,25 X 1,66 M

MULTIFIX B TOOLHOLER SYSTEM, 3 JAW CHUCK, 10 PCS. TOOLHOLDERS APPROX. 48.900 WORKING HOURS (MACHINE ON)
Vendedor: S+B Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-top width: 450 mm spitzenhohe 102 mm spindle bore 20 mm rotating speeds: 90-3100 rpm revolover: 6 x approx. weight: 400 kg 
 TOP WIDTH: 450 MM SPITZENHOHE 102 MM SPINDLE BORE 20 MM ROTATING SPEEDS: 90-3100 RPM REVOLOVER: 6 X APPROX. WEIGHT: 400 KG
Vendedor: Bach Machines
Año de construcción: usado
Ubicación: Land-bar material dia.:32 mm<br/>turning length:295 mm<br/>turning speeds:30 - 6000 u/min<br/>number of tools:8 <br/>driven tools:ja / yes <br/>control:fanuc 18 tb <br/>total power requirement:8,5 kw<br/>weight of the machine ca.:2,3 plus  0,6 t<br/>dimensions of the machine ca.:1,50  x 1,85 x 1,95  plus stangenvorschub m<br/><br/>     collets    BAR MATERIAL DIA.:32 MM
TURNING LENGTH:295 MM
TURNING SPEEDS:30 - 6000 U/MIN
NUMBER OF TOOLS:8
DRIVEN TOOLS:JA / YES
CONTROL:FANUC 18 TB
TOTAL POWER REQUIREMENT:8,5 KW
WEIGHT OF THE MACHINE CA.:2,3 PLUS 0,6 T
DIMENSIONS OF THE MACHINE CA.:1,50 X 1,85 X 1,95 PLUS STANGENVORSCHUB M

COLLETS
Vendedor: S+B Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Precio: 5.900 €
Ubicación: Land-milling machine schaublin 13
    travels xyz: 320-175-375
    spindeltaper: iso30-
    spindelspeeds: 58-2000
    tablesize: 600x210mm
with angle table
2 axes powerfeeds and rapids
angle head iso 30
coolantsystem
very nice condition
 MILLING MACHINE SCHAUBLIN 13 TRAVELS XYZ: 320-175-375 SPINDELTAPER: ISO30- SPINDELSPEEDS: 58-2000 TABLESIZE: 600X210MM WITH ANGLE TABLE 2 AXES POWERFEEDS AND RAPIDS ANGLE HEAD ISO 30 COOLANTSYSTEM VERY NICE CONDITION
Vendedor: Veltman Machines BV
Año de construcción: usado
Ubicación: Land-<br>turning diameter: 270 mm<br>turning length: 500 mm<br>spindle bore: 28 mm<br>motor power: 0 hp/kw <br><p>make   schaublin swiss</p>
<p>type     125 c</p>
<p>year     80 er</p>
<p>specifications</p>
<p>swing over bed Ø  270 mm</p>
<p>swing over cross slide  250 mm</p>
<p>distance between centres   500 mm</p>
<p>spindle bore   28 mm</p>
<p>spindle speeds / ranges   3000 rpm</p>
<p>bed width   flatt guide ways mm</p>
<p>dimensions</p>
<p>length   1500 mm</p>
<p>width      700 mm</p>
<p>height     1300 mm</p>
<p>incl. heidenhain 3 axis droincl. collet deviceincl. threading</p>
<p>schaublin 125 c high swiss tool lathe</p>
<p>
TURNING DIAMETER: 270 MM
TURNING LENGTH: 500 MM
SPINDLE BORE: 28 MM
MOTOR POWER: 0 HP/KW

MAKE&NBSP; &NBSP;SCHAUBLIN SWISS

TYPE&NBSP; &NBSP; &NBSP;125 C

YEAR&NBSP; &NBSP; &NBSP;80 ER

SPECIFICATIONS

SWING OVER BED Ø&NBSP; 270 MM

SWING OVER CROSS SLIDE&NBSP; 250 MM

DISTANCE BETWEEN CENTRES&NBSP; &NBSP;500 MM

SPINDLE BORE&NBSP; &NBSP;28 MM

SPINDLE SPEEDS / RANGES&NBSP; &NBSP;3000 RPM

BED WIDTH&NBSP; &NBSP;FLATT GUIDE WAYS MM

DIMENSIONS

LENGTH&NBSP; &NBSP;1500 MM

WIDTH&NBSP; &NBSP; &NBSP; 700 MM

HEIGHT&NBSP; &NBSP; &NBSP;1300 MM

INCL. HEIDENHAIN 3 AXIS DROINCL. COLLET DEVICEINCL. THREADING

SCHAUBLIN 125 C HIGH SWISS TOOL LATHE

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land--digital display
-accessories available
tip height 125 mm
top width 500 mm
speed 45-3000 u/mm
feed 4-260 mm / min
camlock d1-3 spindle nose "
tailstock taper mk 2
turning diameter over bed 250 mm
swing over cross slide 120 mm
upper carriage travel 100 mm
cross travel 180 mm
dimension (w x d x h) 1500 x 850 x 1300 mm
weight approx. 							950 kg

-DIGITAL DISPLAY -ACCESSORIES AVAILABLE TIP HEIGHT 125 MM TOP WIDTH 500 MM SPEED 45-3000 U/MM FEED 4-260 MM / MIN CAMLOCK D1-3 SPINDLE NOSE " TAILSTOCK TAPER MK 2 TURNING DIAMETER OVER BED 250 MM SWING OVER CROSS SLIDE 120 MM UPPER CARRIAGE TRAVEL 100 MM CROSS TRAVEL 180 MM DIMENSION (W X D X H) 1500 X 850 X 1300 MM WEIGHT APPROX. 950 KG
Vendedor: Catalano Werkzeugmaschinen AG
Año de construcción: usado
Ubicación: Land-<br>center height: 100 mm<br>center distance: 375 mm<br>spindle bore: 20 mm <br><p>specifications</p>
<p>swing over bed Ø  200 mm</p>
<p>swing over cross slide  120 mm</p>
<p>distance between centres  375 mm</p>
<p>spindle bore  20 mm</p>
<p>power  1.5 hp kw</p>
<p>dimensions</p>
<p>length   1400 mm</p>
<p>width   1200 mm</p>
<p>height   1400 mm</p>
<p>
CENTER HEIGHT: 100 MM
CENTER DISTANCE: 375 MM
SPINDLE BORE: 20 MM

SPECIFICATIONS

SWING OVER BED Ø&NBSP; 200 MM

SWING OVER CROSS SLIDE&NBSP; 120 MM

DISTANCE BETWEEN CENTRES&NBSP; 375 MM

SPINDLE BORE&NBSP; 20 MM

POWER&NBSP; 1.5 HP KW

DIMENSIONS

LENGTH&NBSP; &NBSP;1400 MM

WIDTH&NBSP; &NBSP;1200 MM

HEIGHT&NBSP; &NBSP;1400 MM

Vendedor: Mach4metal
Año de construcción: usado
Precio: 3.900 €
Ubicación: Land-simens sinumerik,                           probably 3 system control
turning diameter over bed                                      520 mm
spindle bore                                                    42 mm
maximum turning diameter                                       220 mm
longitudinal travel (z axis)                                   375 mm
plan travel (x-axis)                                           210 mm
spindeldrehzahlberich                             30 u/min - 5,000 rpm
machine weight about                                             4.25 t
dimensions l/w/h approximately                 3.58 m / 2,35 m / 2.05 m 
remarks: the z axis should be, revised by agreement in the short run free, 
bj. around 1985
  SIMENS SINUMERIK, PROBABLY 3 SYSTEM CONTROL TURNING DIAMETER OVER BED 520 MM SPINDLE BORE 42 MM MAXIMUM TURNING DIAMETER 220 MM LONGITUDINAL TRAVEL (Z AXIS) 375 MM PLAN TRAVEL (X-AXIS) 210 MM SPINDELDREHZAHLBERICH 30 U/MIN - 5,000 RPM MACHINE WEIGHT ABOUT 4.25 T DIMENSIONS L/W/H APPROXIMATELY 3.58 M / 2,35 M / 2.05 M REMARKS: THE Z AXIS SHOULD BE, REVISED BY AGREEMENT IN THE SHORT RUN FREE, BJ. AROUND 1985
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Precio: 1.990 €
Ubicación: Land-simens sinumerik,                             probably 3 system control
turning diameter over bed                                        520 mm
spindle bore                                                      42 mm
maximum turning diameter                                         220 mm
longitudinal travel (z axis)                                     375 mm
plan travel (x-axis)                                             210 mm
spindeldrehzahlberich                               30 u/min - 5,000 rpm
machine weight about                                               4.25 t
dimensions l/w/h approximately                   3.58 m / 2,35 m / 2.05 m 

comments: part - carrier without control for spare parts recovery
   SIMENS SINUMERIK, PROBABLY 3 SYSTEM CONTROL TURNING DIAMETER OVER BED 520 MM SPINDLE BORE 42 MM MAXIMUM TURNING DIAMETER 220 MM LONGITUDINAL TRAVEL (Z AXIS) 375 MM PLAN TRAVEL (X-AXIS) 210 MM SPINDELDREHZAHLBERICH 30 U/MIN - 5,000 RPM MACHINE WEIGHT ABOUT 4.25 T DIMENSIONS L/W/H APPROXIMATELY 3.58 M / 2,35 M / 2.05 M COMMENTS: PART - CARRIER WITHOUT CONTROL FOR SPARE PARTS RECOVERY
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-travel x, y, z: 720 x 500 x 450 mm
the machine is in good technical condition, by prior arrangement, the opportunity to test. 4th integrated axis rotary table in the base table (round cut) 4-axis interpolation or slowed - 5-axis horizontal vertical spindle transfer automatically - ge fanuc series 16-m - built-in haidenhein rulers - internal hard drive - ethernet-communications - entrance memory cards - laser tool measurement - renishaw mp9 workpiece probe (0.001 mm) - heavy of zipper palette - chip remover - extra emulsion tank 5um filter - hsk 63a - 11kw spindle - 2-speed transmission 10-2950 / 3000-16000 rpm - threading - 64 tool positions 60 terminals hsk 63a (ea16 er32 er40, weldon, hydro, etc.) - several interchangeable pallets with 12 h 7 holes and others TRAVEL X, Y, Z: 720 X 500 X 450 MM THE MACHINE IS IN GOOD TECHNICAL CONDITION, BY PRIOR ARRANGEMENT, THE OPPORTUNITY TO TEST. 4TH INTEGRATED AXIS ROTARY TABLE IN THE BASE TABLE (ROUND CUT) 4-AXIS INTERPOLATION OR SLOWED - 5-AXIS HORIZONTAL VERTICAL SPINDLE TRANSFER AUTOMATICALLY - GE FANUC SERIES 16-M - BUILT-IN HAIDENHEIN RULERS - INTERNAL HARD DRIVE - ETHERNET-COMMUNICATIONS - ENTRANCE MEMORY CARDS - LASER TOOL MEASUREMENT - RENISHAW MP9 WORKPIECE PROBE (0.001 MM) - HEAVY OF ZIPPER PALETTE - CHIP REMOVER - EXTRA EMULSION TANK 5UM FILTER - HSK 63A - 11KW SPINDLE - 2-SPEED TRANSMISSION 10-2950 / 3000-16000 RPM - THREADING - 64 TOOL POSITIONS 60 TERMINALS HSK 63A (EA16 ER32 ER40, WELDON, HYDRO, ETC.) - SEVERAL INTERCHANGEABLE PALLETS WITH 12 H 7 HOLES AND OTHERS
Vendedor: CEE-Machines
Año de construcción: usado
Precio: 8.000 €
Ubicación: Land-schaublin 180cnn cnc lathe,.

date: 1998
9140 hours
ge fanuc series 20-ta control
manuals included
work light collet chuck, collets and approx 25 turret tool holder SCHAUBLIN 180CNN CNC LATHE,. DATE: 1998 9140 HOURS GE FANUC SERIES 20-TA CONTROL MANUALS INCLUDED WORK LIGHT COLLET CHUCK, COLLETS AND APPROX 25 TURRET TOOL HOLDER
Vendedor: Eduardo Fuerte S.L.
Año de construcción: usado
Ubicación: Land-digital display elesta
x path 700 mm
y-way 250 mm
z route 490 mm
spindle speeds 38-1510 u/min.
recording iso 40
feed 6-1050 mm / min
rapid traverse rate 3500 mm / min
clamping surface 1100 x 305 mm
universal milling head swiveling 0 â° 270â°
dimensions: 1930 x 1560 x 1720 mm
machine weight approx. 2100 kg
 DIGITAL DISPLAY ELESTA X PATH 700 MM Y-WAY 250 MM Z ROUTE 490 MM SPINDLE SPEEDS 38-1510 U/MIN. RECORDING ISO 40 FEED 6-1050 MM / MIN RAPID TRAVERSE RATE 3500 MM / MIN CLAMPING SURFACE 1100 X 305 MM UNIVERSAL MILLING HEAD SWIVELING 0 &ACIRC;&DEG; 270&ACIRC;&DEG; DIMENSIONS: 1930 X 1560 X 1720 MM MACHINE WEIGHT APPROX. 2100 KG
Vendedor: Catalano Werkzeugmaschinen AG
Año de construcción: usado
Ubicación: Land-tip height 125 mm
top width 500 mm
permissible diameter over the bank 270 mm
permissible diameter over the slide 130 mm
allowed the spindle hole diameter 28 mm
permissible diameter into the collet b32 24 mm
maximum diameter of the clamp 150 mm

headstock
camlock d1-3 spindle nose
used collets 32 b or b-32 up
three-phase motor with 50% power / 1 00% ed 7.5 / 5.5 kw
spindle speed, infinitely variable 0-5000 rpm.

sled
cross stroke in the x axis 180 mm
longitudinal stroke in the z 410 mm
resolution of the x-axis radius 0.0005 mm
the z axis resolution 0.001 mm
maximum turning tool cross section 16 x 16 mm
feeds
working feed in two axes, infinitely variable 0-5000 mm / min.
feed force in both axes: 500 dan
rapid advance in both axes 7.5 m / min.

cross handle tailstock (option)
inner cone of spindle morse 3
spindle outer diameter 45 mm
longitudinal stroke of spindle 160 mm

cooling
coolant tank capacity 42 litres

weight of the machine
net weight of the machine ca		1415 kg

space requirements
dimensions of the machine:
length x height x depth 1700 x 1650 x 1170 mm
 TIP HEIGHT 125 MM TOP WIDTH 500 MM PERMISSIBLE DIAMETER OVER THE BANK 270 MM PERMISSIBLE DIAMETER OVER THE SLIDE 130 MM ALLOWED THE SPINDLE HOLE DIAMETER 28 MM PERMISSIBLE DIAMETER INTO THE COLLET B32 24 MM MAXIMUM DIAMETER OF THE CLAMP 150 MM HEADSTOCK CAMLOCK D1-3 SPINDLE NOSE USED COLLETS 32 B OR B-32 UP THREE-PHASE MOTOR WITH 50% POWER / 1 00% ED 7.5 / 5.5 KW SPINDLE SPEED, INFINITELY VARIABLE 0-5000 RPM. SLED CROSS STROKE IN THE X AXIS 180 MM LONGITUDINAL STROKE IN THE Z 410 MM RESOLUTION OF THE X-AXIS RADIUS 0.0005 MM THE Z AXIS RESOLUTION 0.001 MM MAXIMUM TURNING TOOL CROSS SECTION 16 X 16 MM FEEDS WORKING FEED IN TWO AXES, INFINITELY VARIABLE 0-5000 MM / MIN. FEED FORCE IN BOTH AXES: 500 DAN RAPID ADVANCE IN BOTH AXES 7.5 M / MIN. CROSS HANDLE TAILSTOCK (OPTION) INNER CONE OF SPINDLE MORSE 3 SPINDLE OUTER DIAMETER 45 MM LONGITUDINAL STROKE OF SPINDLE 160 MM COOLING COOLANT TANK CAPACITY 42 LITRES WEIGHT OF THE MACHINE NET WEIGHT OF THE MACHINE CA 1415 KG SPACE REQUIREMENTS DIMENSIONS OF THE MACHINE: LENGTH X HEIGHT X DEPTH 1700 X 1650 X 1170 MM
Vendedor: Catalano Werkzeugmaschinen AG
Año de construcción: usado
Ubicación: Land-maximum permissible diameter 250 mm
largest turning diameter 250 mm
maximum turning length 500 mm
ideal workpiece length 120 mm
spindle 1a2-6
adaptation of accessories for schaublin collets b45 / f66
bar passage 65 mm
standard feed diameter 200 mm
hydraulic clamping cylinder, axial clamping force at 50 bar 6000 dan
spindle motor 1 - drive system lateral
power 100% / 60% de 15 / 18.5 kw
torque 134/164 nm
spindle torque 4000 min-1
ax c - lateral
resolution 0.001
axes x1, z1 - transverse x1 200 mm
resolution x1, radius 0.0005 mm
feed x1 20 m / min
longitudinal path z1 500 mm
resolution z1 0.001 mm
feed z1 30 m / min
y1 axis (option) - travel +/- 55 mm
resolution 0.001 mm
feed rate 7.5 m / min
number of tool stations 12
torque of rotating tools, 100% / 35% ed 9/16 nm
speed of rotating tools 4,000 min-1
switching time, pos / pos 0.14 sec.
reitstock - operation -
fixed cone (rotatable sleeve) -
longitudinal path z4 -
spindle 2 - spindle cup iso a2-6
adaptation of accessories for schaublin collets b45 / f66
bar passage 65 mm
standard feed diameter 200 mm
pneumatic clamping cylinder, clamping force axial at 6 bar 3800 dan
c-axis - rotary encoder side
resolution 0.001 mm
z3 axle (spindle 2) - longitudinal path z3 500 mm
resolution z3 0.001 mm
feed z3 30 m / min
axes x2, z2 - crossway x2 200 mm
resolution x2, radius 0.0005 mm
feed x2 20 m / min
longitudinal path z2 500 mm
resolution z2 0.001 mm
feed z2 30 m / min
lower revolver - turret type rotating tools
tool attachment vdi 30
tool orientation radial
number of tool stations 12
torque of rotating tools, 100% / 35% ed 9 / 16nm
speed of rotating tools 4000 min-1
switching time, pos./pos. 0.14 sec.
cnc - control by schaublin fanuc 18i

weight 7100 kg
total power requirement 38 kw
weight of the machine ca. 7,5 t
dimensions of the machine ca. 4.300 x 2.400 x 2.100 mm

accessories included:

bar loader.
rotary tools (photos)
tool holders. (photos) MAXIMUM PERMISSIBLE DIAMETER 250 MM LARGEST TURNING DIAMETER 250 MM MAXIMUM TURNING LENGTH 500 MM IDEAL WORKPIECE LENGTH 120 MM SPINDLE 1A2-6 ADAPTATION OF ACCESSORIES FOR SCHAUBLIN COLLETS B45 / F66 BAR PASSAGE 65 MM STANDARD FEED DIAMETER 200 MM HYDRAULIC CLAMPING CYLINDER, AXIAL CLAMPING FORCE AT 50 BAR 6000 DAN SPINDLE MOTOR 1 - DRIVE SYSTEM LATERAL POWER 100% / 60% DE 15 / 18.5 KW TORQUE 134/164 NM SPINDLE TORQUE 4000 MIN-1 AX C - LATERAL RESOLUTION 0.001 AXES X1, Z1 - TRANSVERSE X1 200 MM RESOLUTION X1, RADIUS 0.0005 MM FEED X1 20 M / MIN LONGITUDINAL PATH Z1 500 MM RESOLUTION Z1 0.001 MM FEED Z1 30 M / MIN Y1 AXIS (OPTION) - TRAVEL +/- 55 MM RESOLUTION 0.001 MM FEED RATE 7.5 M / MIN NUMBER OF TOOL STATIONS 12 TORQUE OF ROTATING TOOLS, 100% / 35% ED 9/16 NM SPEED OF ROTATING TOOLS 4,000 MIN-1 SWITCHING TIME, POS / POS 0.14 SEC. REITSTOCK - OPERATION - FIXED CONE (ROTATABLE SLEEVE) - LONGITUDINAL PATH Z4 - SPINDLE 2 - SPINDLE CUP ISO A2-6 ADAPTATION OF ACCESSORIES FOR SCHAUBLIN COLLETS B45 / F66 BAR PASSAGE 65 MM STANDARD FEED DIAMETER 200 MM PNEUMATIC CLAMPING CYLINDER, CLAMPING FORCE AXIAL AT 6 BAR 3800 DAN C-AXIS - ROTARY ENCODER SIDE RESOLUTION 0.001 MM Z3 AXLE (SPINDLE 2) - LONGITUDINAL PATH Z3 500 MM RESOLUTION Z3 0.001 MM FEED Z3 30 M / MIN AXES X2, Z2 - CROSSWAY X2 200 MM RESOLUTION X2, RADIUS 0.0005 MM FEED X2 20 M / MIN LONGITUDINAL PATH Z2 500 MM RESOLUTION Z2 0.001 MM FEED Z2 30 M / MIN LOWER REVOLVER - TURRET TYPE ROTATING TOOLS TOOL ATTACHMENT VDI 30 TOOL ORIENTATION RADIAL NUMBER OF TOOL STATIONS 12 TORQUE OF ROTATING TOOLS, 100% / 35% ED 9 / 16NM SPEED OF ROTATING TOOLS 4000 MIN-1 SWITCHING TIME, POS./POS. 0.14 SEC. CNC - CONTROL BY SCHAUBLIN FANUC 18I WEIGHT 7100 KG TOTAL POWER REQUIREMENT 38 KW WEIGHT OF THE MACHINE CA. 7,5 T DIMENSIONS OF THE MACHINE CA. 4.300 X 2.400 X 2.100 MM ACCESSORIES INCLUDED: BAR LOADER. ROTARY TOOLS (PHOTOS) TOOL HOLDERS. (PHOTOS)
Vendedor: 3axisgroup GmbH
Año de construcción: usado
Precio: 2.941 €
Ubicación: Land-technical data:

brand: schaublin

type: 102 n

top width: 450 mm
tip height: 102mmreitstock: mk 2
rotation speeds of 90 - 3100 rpm TECHNICAL DATA: BRAND: SCHAUBLIN TYPE: 102 N TOP WIDTH: 450 MM TIP HEIGHT: 102MMREITSTOCK: MK 2 ROTATION SPEEDS OF 90 - 3100 RPM
Vendedor: A-Z Maschinenwelt
Año de construcción: usado
Ubicación: Land-<br>center height: 0 mm<br>center distance: 0 mm<br>spindle bore: 0 mm<br>cnc brand: 0<br>cnc model: 0 <br>schaublin 102<br />
technical data<br />
centre height	 102 	 mm <br />
distance between centres	 450 	 mm <br />
swing over cross-slide	 120 	 mm <br />
swing over bed	 200 	 mm <br />
spindle hole	 20 	 mm <br />
inner taper type	 20 	 w <br />
taper spindle threaded	  	  <br />
spindle speeds:	  	  <br />
number (steps)	 12 	  <br />
from	 400 	 rpm <br />
up to	 3000 	 rpm <br />
taper in tailstock:	 2 	 mt <br />
voltage 50 hz 3x	 380 	 volt <br />
spindle motor	 1.5 	 hp <br />
machine´s weight about	 500 	 kg <br />
overall dimensions machine:	  	  <br />
length	 1000 	 mm <br />
width	 300 	 mm <br />
height	 300 	 mm <br />
various accessories
CENTER HEIGHT: 0 MM
CENTER DISTANCE: 0 MM
SPINDLE BORE: 0 MM
CNC BRAND: 0
CNC MODEL: 0
SCHAUBLIN 102
TECHNICAL DATA
CENTRE HEIGHT 102 MM&NBSP;
DISTANCE BETWEEN CENTRES 450 MM&NBSP;
SWING OVER CROSS-SLIDE 120 MM&NBSP;
SWING OVER BED 200 MM&NBSP;
SPINDLE HOLE 20 MM&NBSP;
INNER TAPER TYPE 20 W&NBSP;
TAPER SPINDLE THREADED &NBSP; &NBSP;
SPINDLE SPEEDS: &NBSP; &NBSP;
NUMBER (STEPS) 12 &NBSP;
FROM 400 RPM&NBSP;
UP TO 3000 RPM&NBSP;
TAPER IN TAILSTOCK: 2 MT&NBSP;
VOLTAGE 50 HZ 3X 380 VOLT&NBSP;
SPINDLE MOTOR 1.5 HP&NBSP;
MACHINE´S WEIGHT ABOUT 500 KG&NBSP;
OVERALL DIMENSIONS MACHINE: &NBSP; &NBSP;
LENGTH 1000 MM&NBSP;
WIDTH 300 MM&NBSP;
HEIGHT 300 MM&NBSP;
VARIOUS ACCESSORIES
Vendedor: Muller Machines SA
Año de construcción: usado
Ubicación: Land-axes	
x-axis	520 mm
y-axis	520 mm
z-axis	420 mm
	
working table	
pallet carrier, b-axis
table size	320x400 mm
max. table load	150 kgs
number of pallets	2
	
milling head	
horizontal and vertical
spindle speed	30-8000 rpm, 2 steps gearbox
spindle taper	iso 40
spindle drive	7.5 kw by 100%
	
feed rates	
cutting feedrate  x/y/z axis	0-15000 mm/min
rapid federate x/y/z axis	20 m/min
	
tool changer	
tool capacity	128
max. tool diameter	100 mm, without adjacent tools 150 mm
max. tool length	270 mm
max. tool weight	4 kgs.
	
cnc control	
fanuc 16-m, electronical handwheel
	
4.th. axis	
b-axis, resolution 0.001°
	
coolant equipment	
coolant equipment 350 lt. with chip conveyor
	
accessories	
complete service documentation in french language

condition	
machine from a school, have only 2880 machining hrs.
machine in good condition
 AXES X-AXIS 520 MM Y-AXIS 520 MM Z-AXIS 420 MM WORKING TABLE PALLET CARRIER, B-AXIS TABLE SIZE 320X400 MM MAX. TABLE LOAD 150 KGS NUMBER OF PALLETS 2 MILLING HEAD HORIZONTAL AND VERTICAL SPINDLE SPEED 30-8000 RPM, 2 STEPS GEARBOX SPINDLE TAPER ISO 40 SPINDLE DRIVE 7.5 KW BY 100% FEED RATES CUTTING FEEDRATE X/Y/Z AXIS 0-15000 MM/MIN RAPID FEDERATE X/Y/Z AXIS 20 M/MIN TOOL CHANGER TOOL CAPACITY 128 MAX. TOOL DIAMETER 100 MM, WITHOUT ADJACENT TOOLS 150 MM MAX. TOOL LENGTH 270 MM MAX. TOOL WEIGHT 4 KGS. CNC CONTROL FANUC 16-M, ELECTRONICAL HANDWHEEL 4.TH. AXIS B-AXIS, RESOLUTION 0.001° COOLANT EQUIPMENT COOLANT EQUIPMENT 350 LT. WITH CHIP CONVEYOR ACCESSORIES COMPLETE SERVICE DOCUMENTATION IN FRENCH LANGUAGE CONDITION MACHINE FROM A SCHOOL, HAVE ONLY 2880 MACHINING HRS. MACHINE IN GOOD CONDITION
Vendedor: Management & Services Greter
Año de construcción: usado
Ubicación: Land-<br>center height: 102 mm<br>center distance: 450 mm<br>spindle bore: 20 mm <br>schaublin 102n-80<br />
toolmakers lathe<br />
technical data<br />
centre height	102 	mm <br />
distance between centres	450 	mm <br />
swing over cross-slide	120 	mm <br />
swing over bed	200 	mm <br />
spindle hole	20 	mm <br />
inner taper type	20 	w <br />
taper spindle threaded	 	 <br />
spindle speeds:	 	 <br />
    stepless	 	 <br />
       from	55 	rpm <br />
       up to	3000 	rpm <br />
voltage 50 hz 3x	380 	volt <br />
spindle motor	1.5 	hp <br />
total power required	2.0 	hp <br />
machine´s weight about	550 	kg <br />
overall dimensions machine:	 	 <br />
    length	1400 	mm <br />
    width	510 	mm <br />
    height	1300 	mm 
CENTER HEIGHT: 102 MM
CENTER DISTANCE: 450 MM
SPINDLE BORE: 20 MM
SCHAUBLIN 102N-80
TOOLMAKERS LATHE
TECHNICAL DATA
CENTRE HEIGHT 102 MM&NBSP;
DISTANCE BETWEEN CENTRES 450 MM&NBSP;
SWING OVER CROSS-SLIDE 120 MM&NBSP;
SWING OVER BED 200 MM&NBSP;
SPINDLE HOLE 20 MM&NBSP;
INNER TAPER TYPE 20 W&NBSP;
TAPER SPINDLE THREADED &NBSP;
SPINDLE SPEEDS: &NBSP;
&NBSP; &NBSP; STEPLESS &NBSP;
&NBSP; &NBSP; &NBSP; &NBSP;FROM 55 RPM&NBSP;
&NBSP; &NBSP; &NBSP; &NBSP;UP TO 3000 RPM&NBSP;
VOLTAGE 50 HZ 3X 380 VOLT&NBSP;
SPINDLE MOTOR 1.5 HP&NBSP;
TOTAL POWER REQUIRED 2.0 HP&NBSP;
MACHINE´S WEIGHT ABOUT 550 KG&NBSP;
OVERALL DIMENSIONS MACHINE: &NBSP;
&NBSP; &NBSP; LENGTH 1400 MM&NBSP;
&NBSP; &NBSP; WIDTH 510 MM&NBSP;
&NBSP; &NBSP; HEIGHT 1300 MM&NBSP;
Vendedor: Muller Machines SA
Año de construcción: usado
Precio: 10.500 €
Ubicación: Land-toolroom lathe schaublin 135
    centre distance: 630mm
    centre height: 135mm
    spindlebore: 40mm
    spindelspeeds: 45-3000
with a set of c5 collets
scroll chuck 160mm with inner and outer jaws
multifix a qctp with 4 toolholders
powerfeed
tailstock
spindlespeed adjustable over variator
spindlenose camlock d1-4
no brake
 TOOLROOM LATHE SCHAUBLIN 135 CENTRE DISTANCE: 630MM CENTRE HEIGHT: 135MM SPINDLEBORE: 40MM SPINDELSPEEDS: 45-3000 WITH A SET OF C5 COLLETS SCROLL CHUCK 160MM WITH INNER AND OUTER JAWS MULTIFIX A QCTP WITH 4 TOOLHOLDERS POWERFEED TAILSTOCK SPINDLESPEED ADJUSTABLE OVER VARIATOR SPINDLENOSE CAMLOCK D1-4 NO BRAKE
Vendedor: Veltman Machines BV
Año de construcción: usado
Ubicación: Land-<br>table length: 1120 mm<br>table width: 510 mm<br>longitudinal x: 1020 mm<br>cross y: 510 mm<br>vertical z: 510 mm<br>positions atc: 20  <br>positions apc: 0  <br>cnc brand: fanuc<br>cnc model: 0-md <br>schaublin 100 cnc<br />
vertical machining center<br />
technical data<br />
table length	1120 	mm <br />
table width	510 	mm <br />
longitudinal travel (x-axis)	1020 	mm <br />
transversal travel (y axis)	510 	mm <br />
vertical travel (z axis)	510 	mm <br />
table load max.	70 	kg <br />
tool changer:	 	 <br />
number of tools	20 	 <br />
spindle nose:	bt 40 	 <br />
distance from vertical	 	 <br />
    spindle to table	155 - 665 	mm <br />
vertical spindle speeds:	 	 <br />
    stepless	 	 <br />
       from	1 	rpm <br />
       up to	8000 	rpm <br />
feed range	12000 	mm/min <br />
rapid traverse:	30 	m/min <br />
voltage 50 hz 3x	380 	volt <br />
spindle motor	13 	kw <br />
feed motor	1.4 	kw <br />
machine´s weight about	4620 	kg <br />
overall dimensions machine:	 	 <br />
    length	2955 	mm <br />
    width	2168 	mm <br />
    height	2576 	mm 
TABLE LENGTH: 1120 MM
TABLE WIDTH: 510 MM
LONGITUDINAL X: 1020 MM
CROSS Y: 510 MM
VERTICAL Z: 510 MM
POSITIONS ATC: 20  
POSITIONS APC: 0  
CNC BRAND: FANUC
CNC MODEL: 0-MD
SCHAUBLIN 100 CNC
VERTICAL MACHINING CENTER
TECHNICAL DATA
TABLE LENGTH 1120 MM&NBSP;
TABLE WIDTH 510 MM&NBSP;
LONGITUDINAL TRAVEL (X-AXIS) 1020 MM&NBSP;
TRANSVERSAL TRAVEL (Y AXIS) 510 MM&NBSP;
VERTICAL TRAVEL (Z AXIS) 510 MM&NBSP;
TABLE LOAD MAX. 70 KG&NBSP;
TOOL CHANGER: &NBSP;
NUMBER OF TOOLS 20 &NBSP;
SPINDLE NOSE: BT 40 &NBSP;
DISTANCE FROM VERTICAL &NBSP;
&NBSP; &NBSP; SPINDLE TO TABLE 155 - 665 MM&NBSP;
VERTICAL SPINDLE SPEEDS: &NBSP;
&NBSP; &NBSP; STEPLESS &NBSP;
&NBSP; &NBSP; &NBSP; &NBSP;FROM 1 RPM&NBSP;
&NBSP; &NBSP; &NBSP; &NBSP;UP TO 8000 RPM&NBSP;
FEED RANGE 12000 MM/MIN&NBSP;
RAPID TRAVERSE: 30 M/MIN&NBSP;
VOLTAGE 50 HZ 3X 380 VOLT&NBSP;
SPINDLE MOTOR 13 KW&NBSP;
FEED MOTOR 1.4 KW&NBSP;
MACHINE´S WEIGHT ABOUT 4620 KG&NBSP;
OVERALL DIMENSIONS MACHINE: &NBSP;
&NBSP; &NBSP; LENGTH 2955 MM&NBSP;
&NBSP; &NBSP; WIDTH 2168 MM&NBSP;
&NBSP; &NBSP; HEIGHT 2576 MM&NBSP;
Vendedor: Muller Machines SA
Año de construcción: usado
Ubicación: Land-built in 1961
conventional control
speed max. 3,000 rpm
collets divers
loop support
 BUILT IN 1961 CONVENTIONAL CONTROL SPEED MAX. 3,000 RPM COLLETS DIVERS LOOP SUPPORT
Vendedor: CNC Bote Johann Demmel
Año de construcción: usado
Ubicación: cnc turning lathe with slant bed 
cnc: fanuc o-t
technical data
centre height 110 mm 
distance between centres 300 mm 
swing over cross-slide 115 mm 
spindle hole 32 mm 
carriage:  
    longitudinal travel (z-axis) 295 mm 
    transversal strocke (x axis) 220 mm 
turret slide: number 1  
    number of positions turret 1 8  
    inner cone diameter 35 mm 
taper in spindle:  
    camlock  
    inner taper type f 35.gif" alt="Land-
turning diameter: 220 mm
turning length: 300 mm
turret positions: 8
cnc brand: fanuc
cnc model: o-t
schaublin 110 cnc "a2-4"
cnc turning lathe with slant bed 
cnc: fanuc o-t
technical data
centre height 110 mm 
distance between centres 300 mm 
swing over cross-slide 115 mm 
spindle hole 32 mm 
carriage:  
    longitudinal travel (z-axis) 295 mm 
    transversal strocke (x axis) 220 mm 
turret slide: number 1  
    number of positions turret 1 8  
    inner cone diameter 35 mm 
taper in spindle:  
    camlock  
    inner taper type f 35" style="height: 18px;">
TURNING DIAMETER: 220 MM
TURNING LENGTH: 300 MM
TURRET POSITIONS: 8
CNC BRAND: FANUC
CNC MODEL: O-T
SCHAUBLIN 110 CNC "A2-4"
CNC TURNING LATHE WITH SLANT BED&NBSP;
CNC: FANUC O-T
TECHNICAL DATA
CENTRE HEIGHT 110 MM&NBSP;
DISTANCE BETWEEN CENTRES 300 MM&NBSP;
SWING OVER CROSS-SLIDE 115 MM&NBSP;
SPINDLE HOLE 32 MM&NBSP;
CARRIAGE: &NBSP;
&NBSP; &NBSP; LONGITUDINAL TRAVEL (Z-AXIS) 295 MM&NBSP;
&NBSP; &NBSP; TRANSVERSAL STROCKE (X AXIS) 220 MM&NBSP;
TURRET SLIDE: NUMBER 1 &NBSP;
&NBSP; &NBSP; NUMBER OF POSITIONS TURRET 1 8 &NBSP;
&NBSP; &NBSP; INNER CONE DIAMETER 35 MM&NBSP;
TAPER IN SPINDLE: &NBSP;
&NBSP; &NBSP; CAMLOCK &NBSP;
&NBSP; &NBSP; INNER TAPER TYPE F 35
Vendedor: Muller Machines SA
Año de construcción: usado
Precio: 16.900 €
Ubicación: Land-characteristics :
-height of centers : 125 mm,
-distance bewteen centers : 500 mm,
-swing over bed : 270 mm,
-spindle speeds, infinitely variable 45 to 3000 rpm,
-spindle nose : camlock d1-3“,
-spindle taper : morse n°2, stroke 100 mm,
-spindle bore diameter : 28 mm,
-automatic feeding on z and x axis, infinitely variable by dc motor from 4 to 260 mm/min,
-c version : metric, witworth and module universal screwcutting gear box completely integrated to the machine,
-lever-operated retraction device for quicker annd easier screwcutting,
-foot brake-pedal – electrically operated brake,
-main driving motor : 2.05 kw,
-power supply : 380 v,
-net weight : approx. 1190 kg,
-dimensions : lenght 1473 mm, width 630mm, height 1280mm.

accessories / equipement included
-1 digital read out heidenhain type vrz 713 b, resolution 0.005 mm,
-1 « tripan suisse » tool post,
-14 « tripan suisse » tool holders,
-rapid collet holder system,
-complete coolant system,
-1 halogene lamp,
-1 set of 6 screwcutting gear wheels,
-technical and users manual.


machine in very good condition, visible under power.

loading included, shipping possible worldwide.  CHARACTERISTICS : -HEIGHT OF CENTERS : 125 MM, -DISTANCE BEWTEEN CENTERS : 500 MM, -SWING OVER BED : 270 MM, -SPINDLE SPEEDS, INFINITELY VARIABLE 45 TO 3000 RPM, -SPINDLE NOSE : CAMLOCK D1-3“, -SPINDLE TAPER : MORSE N°2, STROKE 100 MM, -SPINDLE BORE DIAMETER : 28 MM, -AUTOMATIC FEEDING ON Z AND X AXIS, INFINITELY VARIABLE BY DC MOTOR FROM 4 TO 260 MM/MIN, -C VERSION : METRIC, WITWORTH AND MODULE UNIVERSAL SCREWCUTTING GEAR BOX COMPLETELY INTEGRATED TO THE MACHINE, -LEVER-OPERATED RETRACTION DEVICE FOR QUICKER ANND EASIER SCREWCUTTING, -FOOT BRAKE-PEDAL – ELECTRICALLY OPERATED BRAKE, -MAIN DRIVING MOTOR : 2.05 KW, -POWER SUPPLY : 380 V, -NET WEIGHT : APPROX. 1190 KG, -DIMENSIONS : LENGHT 1473 MM, WIDTH 630MM, HEIGHT 1280MM. ACCESSORIES / EQUIPEMENT INCLUDED -1 DIGITAL READ OUT HEIDENHAIN TYPE VRZ 713 B, RESOLUTION 0.005 MM, -1 « TRIPAN SUISSE » TOOL POST, -14 « TRIPAN SUISSE » TOOL HOLDERS, -RAPID COLLET HOLDER SYSTEM, -COMPLETE COOLANT SYSTEM, -1 HALOGENE LAMP, -1 SET OF 6 SCREWCUTTING GEAR WHEELS, -TECHNICAL AND USERS MANUAL. MACHINE IN VERY GOOD CONDITION, VISIBLE UNDER POWER. LOADING INCLUDED, SHIPPING POSSIBLE WORLDWIDE.
Vendedor: SARL Kraffter
Año de construcción: usado
Ubicación: cnc turning lathe with slant bed 
cnc: fanuc o-t
technical data
centre height 110 mm 
distance between centres 300 mm 
swing over cross-slide 115 mm 
spindle hole 32 mm 
carriage:  
    longitudinal travel (z-axis) 295 mm 
    transversal strocke (x axis) 220 mm 
turret slide: number 1  
    number of positions turret 1 8  
    inner cone diameter 35 mm 
taper in spindle:  
    camlock  
    inner taper type f 35.gif" alt="Land-
turning diameter: 220 mm
turning length: 300 mm
turret positions: 8
cnc brand: fanuc
cnc model: o-t
schaublin 110 cnc "a2-4"
cnc turning lathe with slant bed 
cnc: fanuc o-t
technical data
centre height 110 mm 
distance between centres 300 mm 
swing over cross-slide 115 mm 
spindle hole 32 mm 
carriage:  
    longitudinal travel (z-axis) 295 mm 
    transversal strocke (x axis) 220 mm 
turret slide: number 1  
    number of positions turret 1 8  
    inner cone diameter 35 mm 
taper in spindle:  
    camlock  
    inner taper type f 35" style="height: 18px;">
TURNING DIAMETER: 220 MM
TURNING LENGTH: 300 MM
TURRET POSITIONS: 8
CNC BRAND: FANUC
CNC MODEL: O-T
SCHAUBLIN 110 CNC "A2-4"
CNC TURNING LATHE WITH SLANT BED&NBSP;
CNC: FANUC O-T
TECHNICAL DATA
CENTRE HEIGHT 110 MM&NBSP;
DISTANCE BETWEEN CENTRES 300 MM&NBSP;
SWING OVER CROSS-SLIDE 115 MM&NBSP;
SPINDLE HOLE 32 MM&NBSP;
CARRIAGE: &NBSP;
&NBSP; &NBSP; LONGITUDINAL TRAVEL (Z-AXIS) 295 MM&NBSP;
&NBSP; &NBSP; TRANSVERSAL STROCKE (X AXIS) 220 MM&NBSP;
TURRET SLIDE: NUMBER 1 &NBSP;
&NBSP; &NBSP; NUMBER OF POSITIONS TURRET 1 8 &NBSP;
&NBSP; &NBSP; INNER CONE DIAMETER 35 MM&NBSP;
TAPER IN SPINDLE: &NBSP;
&NBSP; &NBSP; CAMLOCK &NBSP;
&NBSP; &NBSP; INNER TAPER TYPE F 35
Vendedor: Muller Machines SA
Año de construcción: usado
Ubicación: Land-tip height 102 mm
top width 375 mm
headstock w 20
weight 370 kg
speed 3000 rpm.
 TIP HEIGHT 102 MM TOP WIDTH 375 MM HEADSTOCK W 20 WEIGHT 370 KG SPEED 3000 RPM.
Vendedor: Catalano Werkzeugmaschinen AG
Año de construcción: usado
Ubicación: Land-<br>table length: 600 mm<br>table width: 210 mm<br>longitudinal x: 260 mm<br>cross y: 150 mm<br>vertical z: 310 mm <br>schaublin 13<br />
universal milling machine<br />
technical data<br />
table length	600 	mm <br />
table width	210 	mm <br />
longitudinal travel (x-axis)	260 	mm <br />
transversal travel (y axis)	150 	mm <br />
vertical travel (z axis)	310 	mm <br />
distance from vertical spindle to table	310 	mm <br />
distance from horizontal spindle to table	410 	mm <br />
spindle speeds:	 	 <br />
    stepless	 	 <br />
       from	58 	rpm <br />
       up to	2000 	rpm <br />
taper in spindle	30 	iso 
TABLE LENGTH: 600 MM
TABLE WIDTH: 210 MM
LONGITUDINAL X: 260 MM
CROSS Y: 150 MM
VERTICAL Z: 310 MM
SCHAUBLIN 13
UNIVERSAL MILLING MACHINE
TECHNICAL DATA
TABLE LENGTH 600 MM&NBSP;
TABLE WIDTH 210 MM&NBSP;
LONGITUDINAL TRAVEL (X-AXIS) 260 MM&NBSP;
TRANSVERSAL TRAVEL (Y AXIS) 150 MM&NBSP;
VERTICAL TRAVEL (Z AXIS) 310 MM&NBSP;
DISTANCE FROM VERTICAL SPINDLE TO TABLE 310 MM&NBSP;
DISTANCE FROM HORIZONTAL SPINDLE TO TABLE 410 MM&NBSP;
SPINDLE SPEEDS: &NBSP;
&NBSP; &NBSP; STEPLESS &NBSP;
&NBSP; &NBSP; &NBSP; &NBSP;FROM 58 RPM&NBSP;
&NBSP; &NBSP; &NBSP; &NBSP;UP TO 2000 RPM&NBSP;
TAPER IN SPINDLE 30 ISO&NBSP;
Vendedor: Muller Machines SA
Año de construcción: usado
Ubicación: Land-make: star
model: kjr 16 cnc sliding head lathe 
year: 1990
condition: used
machine type: lathe 
location of machine: europe

machine details
year of manufacture: 1990,
control: yasnac in 5 axes (x-y-z-c and b),
maximum turning diameter: 16 mm,
head stock spindle speed: 300-10000 rpm,
spindle attachment: schaublin f20,
main spindle motor: 2,2 kw / 3,7 kw,
twin turret - number of tools 6 stations turret x 2 = 12,
x-power-driven attachment - spindle speed 225-4500 rpm,
y-power-driven attachment - spindle speed 225-4500 rpm,
b-back working attachment - spindle speed 225-4500 rpm,
3-spindle unit er11,
c-axes unit,
weight approx 2300 kg,

accessories:
17x tool holders
5x tool holders motorized
fire-extinguishing device co2
instruction book  MAKE: STAR MODEL: KJR 16 CNC SLIDING HEAD LATHE YEAR: 1990 CONDITION: USED MACHINE TYPE: LATHE LOCATION OF MACHINE: EUROPE MACHINE DETAILS YEAR OF MANUFACTURE: 1990, CONTROL: YASNAC IN 5 AXES (X-Y-Z-C AND B), MAXIMUM TURNING DIAMETER: 16 MM, HEAD STOCK SPINDLE SPEED: 300-10000 RPM, SPINDLE ATTACHMENT: SCHAUBLIN F20, MAIN SPINDLE MOTOR: 2,2 KW / 3,7 KW, TWIN TURRET - NUMBER OF TOOLS 6 STATIONS TURRET X 2 = 12, X-POWER-DRIVEN ATTACHMENT - SPINDLE SPEED 225-4500 RPM, Y-POWER-DRIVEN ATTACHMENT - SPINDLE SPEED 225-4500 RPM, B-BACK WORKING ATTACHMENT - SPINDLE SPEED 225-4500 RPM, 3-SPINDLE UNIT ER11, C-AXES UNIT, WEIGHT APPROX 2300 KG, ACCESSORIES: 17X TOOL HOLDERS 5X TOOL HOLDERS MOTORIZED FIRE-EXTINGUISHING DEVICE CO2 INSTRUCTION BOOK
Vendedor: CNC Management Ltd
Año de construcción: usado
Ubicación: Land-<br>table length: 1100 mm<br>table width: 305 mm<br>longitudinal x: 700 mm<br>cross y: 250 mm<br>vertical z: 490 mm <br>schaublin 53n<br />
universal milling machine <br />
technical data<br />
table length	1100 	mm <br />
table width	305 	mm <br />
longitudinal travel (x-axis)	700 	mm <br />
transversal travel (y axis)	250 	mm <br />
vertical travel (z axis)	490 	mm <br />
spindle speeds:	 	 <br />
    number (steps)	18 	 <br />
       from	38 	rpm <br />
       up to	1510 	rpm <br />
taper in spindle	40 	iso <br />
feeds steps:	18 	 <br />
    longitudinal from	12.0 	mm/min <br />
       up to	1050 	mm/min <br />
    transversal from	12.0 	mm/min <br />
       up to	1050 	mm/min <br />
    vertical from	6.0 	mm/min <br />
       up to	525 	mm/min
TABLE LENGTH: 1100 MM
TABLE WIDTH: 305 MM
LONGITUDINAL X: 700 MM
CROSS Y: 250 MM
VERTICAL Z: 490 MM
SCHAUBLIN 53N
UNIVERSAL MILLING MACHINE&NBSP;
TECHNICAL DATA
TABLE LENGTH 1100 MM&NBSP;
TABLE WIDTH 305 MM&NBSP;
LONGITUDINAL TRAVEL (X-AXIS) 700 MM&NBSP;
TRANSVERSAL TRAVEL (Y AXIS) 250 MM&NBSP;
VERTICAL TRAVEL (Z AXIS) 490 MM&NBSP;
SPINDLE SPEEDS: &NBSP;
&NBSP; &NBSP; NUMBER (STEPS) 18 &NBSP;
&NBSP; &NBSP; &NBSP; &NBSP;FROM 38 RPM&NBSP;
&NBSP; &NBSP; &NBSP; &NBSP;UP TO 1510 RPM&NBSP;
TAPER IN SPINDLE 40 ISO&NBSP;
FEEDS STEPS: 18 &NBSP;
&NBSP; &NBSP; LONGITUDINAL FROM 12.0 MM/MIN&NBSP;
&NBSP; &NBSP; &NBSP; &NBSP;UP TO 1050 MM/MIN&NBSP;
&NBSP; &NBSP; TRANSVERSAL FROM 12.0 MM/MIN&NBSP;
&NBSP; &NBSP; &NBSP; &NBSP;UP TO 1050 MM/MIN&NBSP;
&NBSP; &NBSP; VERTICAL FROM 6.0 MM/MIN&NBSP;
&NBSP; &NBSP; &NBSP; &NBSP;UP TO 525 MM/MIN
Vendedor: Muller Machines SA
Año de construcción: usado
Precio: 16.900 €
Ubicación: Land-characteristics :

-height of centers : 125 mm,
-distance bewteen centers : 500 mm,
-swing over bed : 270 mm,
-spindle speeds, infinitely variable 45 to 3000 rpm,
-spindle nose : camlock d1-3“,
-spindle taper : morse n°2, stroke 100 mm,
-spindle bore diameter : 28 mm,
-automatic feeding on z and x axis, infinitely variable by dc motor from 4 to 260 mm/min,
-c version : metric, witworth and module universal screwcutting gear box completely integrated to the machine,
-lever-operated retraction device for quicker annd easier screwcutting,
-foot brake-pedal – electrically operated brake,
-main driving motor : 2.05 kw,
-power supply : 380 v,
-net weight : approx. 1190 kg,
yler3bw
-dimensions : lenght 1473 mm, width 630mm, height 1280mm.


accessories / equipement included:

-rapid collet holder system,
-1 ladner 3 jaw concentric chuck Ø125 mm new never used in original box,
-2 sets of hard jaws ladner new,
-1 steady rest,
-1 set of 38 schaublin b32 collets,
-« original multifix suisse » tool post,
-5 tool holders,
-complete coolant system,
-1 halogene lamp,
-technical and users manual.

machine in very good condition, visible under power.

loading included, shipping possible worldwide.  CHARACTERISTICS : -HEIGHT OF CENTERS : 125 MM, -DISTANCE BEWTEEN CENTERS : 500 MM, -SWING OVER BED : 270 MM, -SPINDLE SPEEDS, INFINITELY VARIABLE 45 TO 3000 RPM, -SPINDLE NOSE : CAMLOCK D1-3“, -SPINDLE TAPER : MORSE N°2, STROKE 100 MM, -SPINDLE BORE DIAMETER : 28 MM, -AUTOMATIC FEEDING ON Z AND X AXIS, INFINITELY VARIABLE BY DC MOTOR FROM 4 TO 260 MM/MIN, -C VERSION : METRIC, WITWORTH AND MODULE UNIVERSAL SCREWCUTTING GEAR BOX COMPLETELY INTEGRATED TO THE MACHINE, -LEVER-OPERATED RETRACTION DEVICE FOR QUICKER ANND EASIER SCREWCUTTING, -FOOT BRAKE-PEDAL – ELECTRICALLY OPERATED BRAKE, -MAIN DRIVING MOTOR : 2.05 KW, -POWER SUPPLY : 380 V, -NET WEIGHT : APPROX. 1190 KG, YLER3BW -DIMENSIONS : LENGHT 1473 MM, WIDTH 630MM, HEIGHT 1280MM. ACCESSORIES / EQUIPEMENT INCLUDED: -RAPID COLLET HOLDER SYSTEM, -1 LADNER 3 JAW CONCENTRIC CHUCK Ø125 MM NEW NEVER USED IN ORIGINAL BOX, -2 SETS OF HARD JAWS LADNER NEW, -1 STEADY REST, -1 SET OF 38 SCHAUBLIN B32 COLLETS, -« ORIGINAL MULTIFIX SUISSE » TOOL POST, -5 TOOL HOLDERS, -COMPLETE COOLANT SYSTEM, -1 HALOGENE LAMP, -TECHNICAL AND USERS MANUAL. MACHINE IN VERY GOOD CONDITION, VISIBLE UNDER POWER. LOADING INCLUDED, SHIPPING POSSIBLE WORLDWIDE.
Vendedor: SARL Kraffter
Año de construcción: usado
Ubicación: Land-<br>center height: 102 mm<br>center distance: 470 mm<br>spindle bore: 20 mm <br>schaublin 102 n<br />
toolmakers lathe<br />
technical data<br />
centre height	102 	mm <br />
distance between centres	470 	mm <br />
swing over cross-slide	120 	mm <br />
swing over bed	200 	mm <br />
spindle hole	20 	mm <br />
inner taper type	20 	w <br />
taper spindle threaded	 	 <br />
spindle speeds:	 	 <br />
    stepless	 	 <br />
       from	50 	rpm <br />
       up to	5000 	rpm <br />
taper in tailstock:	2 	mt 
CENTER HEIGHT: 102 MM
CENTER DISTANCE: 470 MM
SPINDLE BORE: 20 MM
SCHAUBLIN 102 N
TOOLMAKERS LATHE
TECHNICAL DATA
CENTRE HEIGHT 102 MM&NBSP;
DISTANCE BETWEEN CENTRES 470 MM&NBSP;
SWING OVER CROSS-SLIDE 120 MM&NBSP;
SWING OVER BED 200 MM&NBSP;
SPINDLE HOLE 20 MM&NBSP;
INNER TAPER TYPE 20 W&NBSP;
TAPER SPINDLE THREADED &NBSP;
SPINDLE SPEEDS: &NBSP;
&NBSP; &NBSP; STEPLESS &NBSP;
&NBSP; &NBSP; &NBSP; &NBSP;FROM 50 RPM&NBSP;
&NBSP; &NBSP; &NBSP; &NBSP;UP TO 5000 RPM&NBSP;
TAPER IN TAILSTOCK: 2 MT&NBSP;
Vendedor: Muller Machines SA
Año de construcción: usado
Ubicación: Land-gr. turning diameter: bed gr 270 mm. turning length: 500 mm spindle bore: 28 mm spindle speeds: 0-5000 rpm rapid traverse x axis: 7.5 m / min rapid traverse z axis: 7.5 m / min spindle drive: 7,5/5,5 kw space: 1700 x 1170 x 1650 mm weight: 1415 kg 
 GR. TURNING DIAMETER: BED GR 270 MM. TURNING LENGTH: 500 MM SPINDLE BORE: 28 MM SPINDLE SPEEDS: 0-5000 RPM RAPID TRAVERSE X AXIS: 7.5 M / MIN RAPID TRAVERSE Z AXIS: 7.5 M / MIN SPINDLE DRIVE: 7,5/5,5 KW SPACE: 1700 X 1170 X 1650 MM WEIGHT: 1415 KG
Vendedor: Kurt Steiger Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: spindle speeds:  
    stepless  
       from 55 rpm 
       up to 3000 rpm 
taper in tailstock: 5 mt 
spindle diameter 60 mm .gif" alt="Land-
center height: 150 mm
center distance: 600 mm
spindle bore: 40 mm
schaublin 150
centre lathe 
technical data
centre height 150 mm 
distance between centres 600 mm 
swing over cross-slide 177 mm 
swing over bed 340 mm 
spindle hole 40 mm 
taper in spindelstock mk 5  
taper in spindle:  
    camlock d 1-4"  
spindle speeds:  
    stepless  
       from 55 rpm 
       up to 3000 rpm 
taper in tailstock: 5 mt 
spindle diameter 60 mm " style="height: 18px;">
CENTER HEIGHT: 150 MM
CENTER DISTANCE: 600 MM
SPINDLE BORE: 40 MM
SCHAUBLIN 150
CENTRE LATHE&NBSP;
TECHNICAL DATA
CENTRE HEIGHT 150 MM&NBSP;
DISTANCE BETWEEN CENTRES 600 MM&NBSP;
SWING OVER CROSS-SLIDE 177 MM&NBSP;
SWING OVER BED 340 MM&NBSP;
SPINDLE HOLE 40 MM&NBSP;
TAPER IN SPINDELSTOCK MK 5 &NBSP;
TAPER IN SPINDLE: &NBSP;
&NBSP; &NBSP; CAMLOCK D 1-4" &NBSP;
SPINDLE SPEEDS: &NBSP;
&NBSP; &NBSP; STEPLESS &NBSP;
&NBSP; &NBSP; &NBSP; &NBSP;FROM 55 RPM&NBSP;
&NBSP; &NBSP; &NBSP; &NBSP;UP TO 3000 RPM&NBSP;
TAPER IN TAILSTOCK: 5 MT&NBSP;
SPINDLE DIAMETER 60 MM&NBSP;
Vendedor: Muller Machines SA
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)