41 ofertas

Año de construcción: usado
Ubicación: Land-pressing force: 7 to.
piston stroke: approx. 80 mm
table size: 290 x 340 mm
height: 180 mm
total power consumption: ca. 1,5 kw / 380 v
machine weight: approx. 700 kg
machine dimensions: 780 x 1000 x 1600 mm (w x d x h)

accessories / equipment:

light barrier
2. hd-triggering
machine lamp

all technical data are created according to our best knowledge and existing documents.
each party has the opportunity to visit the press advance under power. PRESSING FORCE: 7 TO. PISTON STROKE: APPROX. 80 MM TABLE SIZE: 290 X 340 MM HEIGHT: 180 MM TOTAL POWER CONSUMPTION: CA. 1,5 KW / 380 V MACHINE WEIGHT: APPROX. 700 KG MACHINE DIMENSIONS: 780 X 1000 X 1600 MM (W X D X H) ACCESSORIES / EQUIPMENT: LIGHT BARRIER 2. HD-TRIGGERING MACHINE LAMP ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS. EACH PARTY HAS THE OPPORTUNITY TO VISIT THE PRESS ADVANCE UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Precio: 6.200 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-ie four pillar die-cutting machine is designed in sturdy welded steel construction. due to your design, this machine has good torsional stability and good the same running properties. this means that the machine outside of the center of the table runs largely parallel to. the pillars are ver bundles, which in turn is brought by a hydraulic cylinder to the downward movement column pair with a tie rod. the two tie rods are connected to two constant velocity shafts to ensure of a better concurrency via knee lever left and right. with automatic lubrication of the column. the machine is equipped with baking supports.

bridge cutting machine with back movable bridge
punching power: 1300kn (130 tons)
table size: 1700x900mm
id: 60-185 mm
electricity: 400v / 50 hz
stroke: 20-160mm the four-column cutting machine is designed in a very solid welded steel construction. due to its design, the machine is almost torsion-resistant and runs with a high degree of griff, which means that it closes almost parallel even under full off-centre load. each pair of column is connected to a tension rod. the downward movement of the tension rod is actuated by one lateral hydraulic cylinder. with automatic lubrication of the column guidance. the machine is equipped with low point limitation.
beam cutting machine with receding beam
cutting force: (130 tons) 1300kn
table size: 1700x900mm
daylight: 60-185 mm
operating voltage: 400v / 50 hz
stroke: 20-160mm IE FOUR PILLAR DIE-CUTTING MACHINE IS DESIGNED IN STURDY WELDED STEEL CONSTRUCTION. DUE TO YOUR DESIGN, THIS MACHINE HAS GOOD TORSIONAL STABILITY AND GOOD THE SAME RUNNING PROPERTIES. THIS MEANS THAT THE MACHINE OUTSIDE OF THE CENTER OF THE TABLE RUNS LARGELY PARALLEL TO. THE PILLARS ARE VER BUNDLES, WHICH IN TURN IS BROUGHT BY A HYDRAULIC CYLINDER TO THE DOWNWARD MOVEMENT COLUMN PAIR WITH A TIE ROD. THE TWO TIE RODS ARE CONNECTED TO TWO CONSTANT VELOCITY SHAFTS TO ENSURE OF A BETTER CONCURRENCY VIA KNEE LEVER LEFT AND RIGHT. WITH AUTOMATIC LUBRICATION OF THE COLUMN. THE MACHINE IS EQUIPPED WITH BAKING SUPPORTS. BRIDGE CUTTING MACHINE WITH BACK MOVABLE BRIDGE PUNCHING POWER: 1300KN (130 TONS) TABLE SIZE: 1700X900MM ID: 60-185 MM ELECTRICITY: 400V / 50 HZ STROKE: 20-160MM THE FOUR-COLUMN CUTTING MACHINE IS DESIGNED IN A VERY SOLID WELDED STEEL CONSTRUCTION. DUE TO ITS DESIGN, THE MACHINE IS ALMOST TORSION-RESISTANT AND RUNS WITH A HIGH DEGREE OF GRIFF, WHICH MEANS THAT IT CLOSES ALMOST PARALLEL EVEN UNDER FULL OFF-CENTRE LOAD. EACH PAIR OF COLUMN IS CONNECTED TO A TENSION ROD. THE DOWNWARD MOVEMENT OF THE TENSION ROD IS ACTUATED BY ONE LATERAL HYDRAULIC CYLINDER. WITH AUTOMATIC LUBRICATION OF THE COLUMN GUIDANCE. THE MACHINE IS EQUIPPED WITH LOW POINT LIMITATION. BEAM CUTTING MACHINE WITH RECEDING BEAM CUTTING FORCE: (130 TONS) 1300KN TABLE SIZE: 1700X900MM DAYLIGHT: 60-185 MM OPERATING VOLTAGE: 400V / 50 HZ STROKE: 20-160MM
Vendedor: tech.co Glaser GmbH
Año de construcción: usado
Ubicación: Land-pressure:400 t<br/>stroke:400 mm<br/>table surface area:980 x 960 mm<br/>dimensions:2100 x 2120 x 3600 mm<br/>total power requirement:55 kw<br/>weight of the machine ca.:21 t<br/>daylight opening:630 mm<br/>column daylight:1000 mm<br/>stand round side:370 mm<br/>ram head width:980 mm<br/>plunger depth:950 mm<br/>t-slots h 12     650:28 mm<br/>adjustable pressure retention time :0-6 sec<br/>table height above ground level:850 mm<br/>mechanical fixed stop, hand adjustable: <br/>start-up lock-restart lock: <br/>lockable operating mode selector switch: <br/>set-up-tap, sensitive in slow motion: <br/>non-contacting limit switches for stroke setting: <br/>hub switching selectable off-or pressure-dependent: <br/>adjustable pressure adjustment via handwheel with disc scale and pressure gauge for press force disp: <br/>electric stroke counter: <br/>control lights: <br/>automatic backflow control: <br/>guard grille for rear and lateral stand passages: <br/>sick light curtain control c-4000 standard 750 protective range height 750 mm: <br/>macrolone protective disc at the front, above c 4000: <br/>painting: struck varnish according to ral clay according to specification: <br/>two-hand security circuit: <br/>foot single hub shift: <br/>oil cooling as a water heat exchanger thermostatically controlled:2760 ?<br/>oil cooling as an air cooler:3960 ?<br/>sync control to link the press to feeding devices:710 ?<br/>press control as memory programmable control, type s7-1500 with siemens control display kp700:10980 ?<br/>pressure setting via kp 700:3780 ?<br/>dritrolled relief for operation with tool springs:1980 ?<br/><br/> PRESSURE:400 T
STROKE:400 MM
TABLE SURFACE AREA:980 X 960 MM
DIMENSIONS:2100 X 2120 X 3600 MM
TOTAL POWER REQUIREMENT:55 KW
WEIGHT OF THE MACHINE CA.:21 T
DAYLIGHT OPENING:630 MM
COLUMN DAYLIGHT:1000 MM
STAND ROUND SIDE:370 MM
RAM HEAD WIDTH:980 MM
PLUNGER DEPTH:950 MM
T-SLOTS H 12 650:28 MM
ADJUSTABLE PRESSURE RETENTION TIME :0-6 SEC
TABLE HEIGHT ABOVE GROUND LEVEL:850 MM
MECHANICAL FIXED STOP, HAND ADJUSTABLE:
START-UP LOCK-RESTART LOCK:
LOCKABLE OPERATING MODE SELECTOR SWITCH:
SET-UP-TAP, SENSITIVE IN SLOW MOTION:
NON-CONTACTING LIMIT SWITCHES FOR STROKE SETTING:
HUB SWITCHING SELECTABLE OFF-OR PRESSURE-DEPENDENT:
ADJUSTABLE PRESSURE ADJUSTMENT VIA HANDWHEEL WITH DISC SCALE AND PRESSURE GAUGE FOR PRESS FORCE DISP:
ELECTRIC STROKE COUNTER:
CONTROL LIGHTS:
AUTOMATIC BACKFLOW CONTROL:
GUARD GRILLE FOR REAR AND LATERAL STAND PASSAGES:
SICK LIGHT CURTAIN CONTROL C-4000 STANDARD 750 PROTECTIVE RANGE HEIGHT 750 MM:
MACROLONE PROTECTIVE DISC AT THE FRONT, ABOVE C 4000:
PAINTING: STRUCK VARNISH ACCORDING TO RAL CLAY ACCORDING TO SPECIFICATION:
TWO-HAND SECURITY CIRCUIT:
FOOT SINGLE HUB SHIFT:
OIL COOLING AS A WATER HEAT EXCHANGER THERMOSTATICALLY CONTROLLED:2760 ?
OIL COOLING AS AN AIR COOLER:3960 ?
SYNC CONTROL TO LINK THE PRESS TO FEEDING DEVICES:710 ?
PRESS CONTROL AS MEMORY PROGRAMMABLE CONTROL, TYPE S7-1500 WITH SIEMENS CONTROL DISPLAY KP700:10980 ?
PRESSURE SETTING VIA KP 700:3780 ?
DRITROLLED RELIEF FOR OPERATION WITH TOOL SPRINGS:1980 ?

Vendedor: Hidrobrasil GmbH
Año de construcción: usado
Ubicación: Land-cutting force: 1250kn, table dimensions: 800x650mm, working height: 1030-1195mm, max. daylight: 183mm, max. stroke: 165mm, min. back stroke: 15mm, length: 2370mm, width: 1300mm, height: 1810mm, weight: 3t.  CUTTING FORCE: 1250KN, TABLE DIMENSIONS: 800X650MM, WORKING HEIGHT: 1030-1195MM, MAX. DAYLIGHT: 183MM, MAX. STROKE: 165MM, MIN. BACK STROKE: 15MM, LENGTH: 2370MM, WIDTH: 1300MM, HEIGHT: 1810MM, WEIGHT: 3T.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-pressure:160 t<br/>stroke:300 mm<br/>table surface area:1000 x 700 mm<br/>dimensions:2500 x 2500 x 3400 mm<br/>total power requirement:30 kw<br/>weight of the machine ca.:10 t<br/>daylight opening:600 mm<br/>column daylight:1100 mm<br/>stand round side:300 mm<br/>ram head width:1000 mm<br/>plunger depth:650 mm<br/>t-slots h 12     650:22 mm<br/>adjustable pressure retention time :0-6 sec<br/>plunger bore, Ø h7:40 mm<br/>table height above ground level:850 mm<br/>table fall through hole:80 mm<br/>two user manuals with awf card and complete electrical and hydraulic plans: <br/>mechanical fixed stop, hand adjustable:100 mm<br/>lockable operating mode selector switch: <br/>set-up-tap, sensitive in slow motion: <br/>non-contacting limit switches for stroke setting: <br/>hub switching selectable off-or pressure-dependent: <br/>adjustable pressure adjustment via handwheel with disc scale and pressure gauge for press force disp: <br/>electric stroke counter: <br/>control lights: <br/>automatic backflow control: <br/>sick light curtain control c-4000 standard 750 protective range height 750 mm: <br/>lacquering: structural varnish according to ral 7035: <br/><br/> PRESSURE:160 T
STROKE:300 MM
TABLE SURFACE AREA:1000 X 700 MM
DIMENSIONS:2500 X 2500 X 3400 MM
TOTAL POWER REQUIREMENT:30 KW
WEIGHT OF THE MACHINE CA.:10 T
DAYLIGHT OPENING:600 MM
COLUMN DAYLIGHT:1100 MM
STAND ROUND SIDE:300 MM
RAM HEAD WIDTH:1000 MM
PLUNGER DEPTH:650 MM
T-SLOTS H 12 650:22 MM
ADJUSTABLE PRESSURE RETENTION TIME :0-6 SEC
PLUNGER BORE, Ø H7:40 MM
TABLE HEIGHT ABOVE GROUND LEVEL:850 MM
TABLE FALL THROUGH HOLE:80 MM
TWO USER MANUALS WITH AWF CARD AND COMPLETE ELECTRICAL AND HYDRAULIC PLANS:
MECHANICAL FIXED STOP, HAND ADJUSTABLE:100 MM
LOCKABLE OPERATING MODE SELECTOR SWITCH:
SET-UP-TAP, SENSITIVE IN SLOW MOTION:
NON-CONTACTING LIMIT SWITCHES FOR STROKE SETTING:
HUB SWITCHING SELECTABLE OFF-OR PRESSURE-DEPENDENT:
ADJUSTABLE PRESSURE ADJUSTMENT VIA HANDWHEEL WITH DISC SCALE AND PRESSURE GAUGE FOR PRESS FORCE DISP:
ELECTRIC STROKE COUNTER:
CONTROL LIGHTS:
AUTOMATIC BACKFLOW CONTROL:
SICK LIGHT CURTAIN CONTROL C-4000 STANDARD 750 PROTECTIVE RANGE HEIGHT 750 MM:
LACQUERING: STRUCTURAL VARNISH ACCORDING TO RAL 7035:

Vendedor: Hidrobrasil GmbH
Año de construcción: usado
Ubicación: Land-nominal force: 100t, max. istallation height: 435mm, stroke adjustment: 150mm, ram surface: 600x340mm, table dimensions: 580x450mm, connected load: 11kw.  NOMINAL FORCE: 100T, MAX. ISTALLATION HEIGHT: 435MM, STROKE ADJUSTMENT: 150MM, RAM SURFACE: 600X340MM, TABLE DIMENSIONS: 580X450MM, CONNECTED LOAD: 11KW.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-pressure:200 t<br/>stroke:300 mm<br/>table surface area:1800 x 1000 mm<br/>dimensions:2800 x 2140 x 3600 mm<br/>total power requirement:30 kw<br/>weight of the machine ca.:24 t<br/>daylight opening:600 mm<br/>column daylight:1850 mm<br/>stand round side:400 mm<br/>ram head width:1850 mm<br/>plunger depth:820 mm<br/>t-slots h 12     650:22 mm<br/>adjustable pressure retention time :0-6 sec<br/>table height over floor, with pit for drawing pillow:850 mm<br/>table height over hallway, without pit for pull pillow:1150 mm<br/>hole pattern for drawing pillows:94 x Ø 30 mm<br/>plunger bore, Ø h7:60 mm<br/>mechanical fixed stop, hand adjustable: <br/>start-up lock-restart lock: <br/>lockable operating mode selector switch: <br/>set-up-tap, sensitive in slow motion: <br/>non-contacting limit switches for stroke setting: <br/>hub switching selectable off-or pressure-dependent: <br/>adjustable pressure adjustment via handwheel with disc scale and pressure gauge for press force disp: <br/>electric stroke counter: <br/>control lights: <br/>automatic backflow control: <br/>guard grille for rear and lateral stand passages: <br/>painting: struck varnish according to ral clay according to specification: <br/>two-hand security circuit: <br/>foot single hub shift: <br/>sick-light curtain control leuze mlc 750-protection range height 750 mm: <br/>makrolon-protective glass front, above the light barrier: <br/>electric control: plc, siemens model s7: <br/>oil cooling as a water heat exchanger thermostatically controlled:2760 ?<br/>oil cooling as an air cooler:3960 ?<br/>sync control to link the press to feeding devices:710 ?<br/>pressure setting via kp 700:3780 ?<br/>dritrolled relief for operation with tool springs:1980 ?<br/>pressure setting via kp 700:3780 ?<br/>draw pressure setting table via kp700:3780 ?<br/>draw pressure setting progressive/degressive:1960 <br/><br/> PRESSURE:200 T
STROKE:300 MM
TABLE SURFACE AREA:1800 X 1000 MM
DIMENSIONS:2800 X 2140 X 3600 MM
TOTAL POWER REQUIREMENT:30 KW
WEIGHT OF THE MACHINE CA.:24 T
DAYLIGHT OPENING:600 MM
COLUMN DAYLIGHT:1850 MM
STAND ROUND SIDE:400 MM
RAM HEAD WIDTH:1850 MM
PLUNGER DEPTH:820 MM
T-SLOTS H 12 650:22 MM
ADJUSTABLE PRESSURE RETENTION TIME :0-6 SEC
TABLE HEIGHT OVER FLOOR, WITH PIT FOR DRAWING PILLOW:850 MM
TABLE HEIGHT OVER HALLWAY, WITHOUT PIT FOR PULL PILLOW:1150 MM
HOLE PATTERN FOR DRAWING PILLOWS:94 X Ø 30 MM
PLUNGER BORE, Ø H7:60 MM
MECHANICAL FIXED STOP, HAND ADJUSTABLE:
START-UP LOCK-RESTART LOCK:
LOCKABLE OPERATING MODE SELECTOR SWITCH:
SET-UP-TAP, SENSITIVE IN SLOW MOTION:
NON-CONTACTING LIMIT SWITCHES FOR STROKE SETTING:
HUB SWITCHING SELECTABLE OFF-OR PRESSURE-DEPENDENT:
ADJUSTABLE PRESSURE ADJUSTMENT VIA HANDWHEEL WITH DISC SCALE AND PRESSURE GAUGE FOR PRESS FORCE DISP:
ELECTRIC STROKE COUNTER:
CONTROL LIGHTS:
AUTOMATIC BACKFLOW CONTROL:
GUARD GRILLE FOR REAR AND LATERAL STAND PASSAGES:
PAINTING: STRUCK VARNISH ACCORDING TO RAL CLAY ACCORDING TO SPECIFICATION:
TWO-HAND SECURITY CIRCUIT:
FOOT SINGLE HUB SHIFT:
SICK-LIGHT CURTAIN CONTROL LEUZE MLC 750-PROTECTION RANGE HEIGHT 750 MM:
MAKROLON-PROTECTIVE GLASS FRONT, ABOVE THE LIGHT BARRIER:
ELECTRIC CONTROL: PLC, SIEMENS MODEL S7:
OIL COOLING AS A WATER HEAT EXCHANGER THERMOSTATICALLY CONTROLLED:2760 ?
OIL COOLING AS AN AIR COOLER:3960 ?
SYNC CONTROL TO LINK THE PRESS TO FEEDING DEVICES:710 ?
PRESSURE SETTING VIA KP 700:3780 ?
DRITROLLED RELIEF FOR OPERATION WITH TOOL SPRINGS:1980 ?
PRESSURE SETTING VIA KP 700:3780 ?
DRAW PRESSURE SETTING TABLE VIA KP700:3780 ?
DRAW PRESSURE SETTING PROGRESSIVE/DEGRESSIVE:1960

Vendedor: Hidrobrasil GmbH
Año de construcción: usado
Precio: 2.400 €
Ubicación: Land-pressing force: 10t<br/>  table: 920 x 460 mm<br/>  stamp: 360 x 500 mm<br/>  installation height: lifting height: 60 mm<br/>  condition: good<br/>  footprint: facilities: weight: 1,2 t<br/>  dimensions: 1000 x 1200 x 1,900 mm PRESSING FORCE: 10T
TABLE: 920 X 460 MM
STAMP: 360 X 500 MM
INSTALLATION HEIGHT: LIFTING HEIGHT: 60 MM
CONDITION: GOOD
FOOTPRINT: FACILITIES: WEIGHT: 1,2 T
DIMENSIONS: 1000 X 1200 X 1,900 MM
Vendedor: Fa. Uwe Schlammer Handels- und Vermittlungsagentur
Año de construcción: usado
Ubicación: Land-pressure:160 t<br/>stroke:300 mm<br/>table surface area:700 x 700 mm<br/>dimensions:1700 x 1600 x 3500 mm<br/>total power requirement:30 kw<br/>weight of the machine ca.:9,5 t<br/>daylight opening:600 mm<br/>column daylight:750 mm<br/>stand round side:220 mm<br/>ram head width:700 mm<br/>plunger depth:560 mm<br/>t-slots h 12     650:22 mm<br/>adjustable pressure retention time :0-6 sec<br/>plunger bore, Ø h7:50 mm<br/>table height above ground level:850 mm<br/>table fall through hole:360 x 180 mm<br/>mechanical fixed stop, hand adjustable: <br/>start-up lock-restart lock: <br/>lockable operating mode selector switch: <br/>set-up-tap, sensitive in slow motion: <br/>non-contacting limit switches for stroke setting: <br/>hub switching selectable off-or pressure-dependent: <br/>adjustable pressure adjustment via handwheel with disc scale and pressure gauge for press force disp: <br/>electric stroke counter: <br/>control lights: <br/>automatic backflow control: <br/>guard grille for rear and lateral stand passages: <br/>two-hand security circuit: <br/>sick-light curtain control c-4000 standard 600 protection range height 600 mm: <br/>makrolon-protective glass front, above the fgs: <br/>painting: strucktur lacquer according to ral 6011: <br/><br/> PRESSURE:160 T
STROKE:300 MM
TABLE SURFACE AREA:700 X 700 MM
DIMENSIONS:1700 X 1600 X 3500 MM
TOTAL POWER REQUIREMENT:30 KW
WEIGHT OF THE MACHINE CA.:9,5 T
DAYLIGHT OPENING:600 MM
COLUMN DAYLIGHT:750 MM
STAND ROUND SIDE:220 MM
RAM HEAD WIDTH:700 MM
PLUNGER DEPTH:560 MM
T-SLOTS H 12 650:22 MM
ADJUSTABLE PRESSURE RETENTION TIME :0-6 SEC
PLUNGER BORE, Ø H7:50 MM
TABLE HEIGHT ABOVE GROUND LEVEL:850 MM
TABLE FALL THROUGH HOLE:360 X 180 MM
MECHANICAL FIXED STOP, HAND ADJUSTABLE:
START-UP LOCK-RESTART LOCK:
LOCKABLE OPERATING MODE SELECTOR SWITCH:
SET-UP-TAP, SENSITIVE IN SLOW MOTION:
NON-CONTACTING LIMIT SWITCHES FOR STROKE SETTING:
HUB SWITCHING SELECTABLE OFF-OR PRESSURE-DEPENDENT:
ADJUSTABLE PRESSURE ADJUSTMENT VIA HANDWHEEL WITH DISC SCALE AND PRESSURE GAUGE FOR PRESS FORCE DISP:
ELECTRIC STROKE COUNTER:
CONTROL LIGHTS:
AUTOMATIC BACKFLOW CONTROL:
GUARD GRILLE FOR REAR AND LATERAL STAND PASSAGES:
TWO-HAND SECURITY CIRCUIT:
SICK-LIGHT CURTAIN CONTROL C-4000 STANDARD 600 PROTECTION RANGE HEIGHT 600 MM:
MAKROLON-PROTECTIVE GLASS FRONT, ABOVE THE FGS:
PAINTING: STRUCKTUR LACQUER ACCORDING TO RAL 6011:

Vendedor: Hidrobrasil GmbH
Año de construcción: usado
Ubicación: Land-hydraulic punching and stamping machine

hydraulic punching and embossing machine
 HYDRAULIC PUNCHING AND STAMPING MACHINE HYDRAULIC PUNCHING AND EMBOSSING MACHINE
Vendedor: AGM Graphische Maschinen
Año de construcción: usado
Ubicación: Land-pressure:65 t<br/>stroke:300 mm<br/>table surface area:730 x 440 mm<br/>dimensions:1500 x 1400 x 3100 mm<br/>total power requirement:11 kw<br/>weight of the machine ca.:4,5 t<br/>daylight opening:550 mm<br/>column daylight:800 mm<br/>stand round side:150 mm<br/>ram head width:730 mm<br/>plunger depth:370 mm<br/>t-slots h 12     650:18 mm<br/>adjustable pressure retention time :0-6 sec<br/>plunger bore, Ø h7:50 mm<br/>table height above ground level:850 mm<br/>table fall through hole:350 x 125 mm<br/>table diarrhound hole with orbiting milling:380 x 155 mm<br/>mechanical fixed stop, hand adjustable: <br/>start-up lock-restart lock: <br/>lockable operating mode selector switch: <br/>set-up-tap, sensitive in slow motion: <br/>non-contacting limit switches for stroke setting: <br/>hub switching selectable off-or pressure-dependent: <br/>adjustable pressure adjustment via handwheel with disc scale and pressure gauge for press force disp: <br/>electric stroke counter: <br/>control lights: <br/>automatic backflow control: <br/>guard grille for rear and lateral stand passages: <br/>two-hand security circuit: <br/>sick-light curtain control c-4000 standard 600 protection range height 600 mm: <br/>makrolon-protective glass front, above the fgs: <br/>painting: strucktur lacquer according to ral 6011: <br/>tension lock in the pestle plate: <br/><br/> PRESSURE:65 T
STROKE:300 MM
TABLE SURFACE AREA:730 X 440 MM
DIMENSIONS:1500 X 1400 X 3100 MM
TOTAL POWER REQUIREMENT:11 KW
WEIGHT OF THE MACHINE CA.:4,5 T
DAYLIGHT OPENING:550 MM
COLUMN DAYLIGHT:800 MM
STAND ROUND SIDE:150 MM
RAM HEAD WIDTH:730 MM
PLUNGER DEPTH:370 MM
T-SLOTS H 12 650:18 MM
ADJUSTABLE PRESSURE RETENTION TIME :0-6 SEC
PLUNGER BORE, Ø H7:50 MM
TABLE HEIGHT ABOVE GROUND LEVEL:850 MM
TABLE FALL THROUGH HOLE:350 X 125 MM
TABLE DIARRHOUND HOLE WITH ORBITING MILLING:380 X 155 MM
MECHANICAL FIXED STOP, HAND ADJUSTABLE:
START-UP LOCK-RESTART LOCK:
LOCKABLE OPERATING MODE SELECTOR SWITCH:
SET-UP-TAP, SENSITIVE IN SLOW MOTION:
NON-CONTACTING LIMIT SWITCHES FOR STROKE SETTING:
HUB SWITCHING SELECTABLE OFF-OR PRESSURE-DEPENDENT:
ADJUSTABLE PRESSURE ADJUSTMENT VIA HANDWHEEL WITH DISC SCALE AND PRESSURE GAUGE FOR PRESS FORCE DISP:
ELECTRIC STROKE COUNTER:
CONTROL LIGHTS:
AUTOMATIC BACKFLOW CONTROL:
GUARD GRILLE FOR REAR AND LATERAL STAND PASSAGES:
TWO-HAND SECURITY CIRCUIT:
SICK-LIGHT CURTAIN CONTROL C-4000 STANDARD 600 PROTECTION RANGE HEIGHT 600 MM:
MAKROLON-PROTECTIVE GLASS FRONT, ABOVE THE FGS:
PAINTING: STRUCKTUR LACQUER ACCORDING TO RAL 6011:
TENSION LOCK IN THE PESTLE PLATE:

Vendedor: Hidrobrasil GmbH
Año de construcción: usado
Ubicación: Land-handeinlegesicher

force 7 to
table 250 x 280 mm
height approx. 240 mm
.
stroke 90 mm
badas079di
power 1,5 kw
.
wxdxh approx. 1 x 1.4 x 2.05 m
weight approx. 0.8 to
.
machine is handeinlegesicher and new uvv-tested! HANDEINLEGESICHER FORCE 7 TO TABLE 250 X 280 MM HEIGHT APPROX. 240 MM . STROKE 90 MM BADAS079DI POWER 1,5 KW . WXDXH APPROX. 1 X 1.4 X 2.05 M WEIGHT APPROX. 0.8 TO . MACHINE IS HANDEINLEGESICHER AND NEW UVV-TESTED!
Vendedor: Schrenk Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-pressure:300 t<br/>stroke:150 mm<br/>table surface area:830 x 920 mm<br/>dimensions:1800 x 2120 x 3760 mm<br/>total power requirement:55 kw<br/>weight of the machine ca.:20 t<br/>daylight opening:600  mm<br/>column daylight:850 mm<br/>stand round side:400 mm<br/>ram head width:820 mm<br/>plunger depth:850 mm<br/>t-slots h 12     650:28 mm<br/>adjustable pressure retention time :0-6 sec<br/>table height above ground level:850 mm<br/>table fall through hole:300 x 320 mm<br/>siemens control system: <br/>mechanical fixed stop, hand adjustable: <br/>start-up lock-restart lock: <br/>lockable operating mode selector switch: <br/>set-up-tap, sensitive in slow motion: <br/>non-contacting limit switches for stroke setting: <br/>hub switching selectable off-or pressure-dependent: <br/>adjustable pressure adjustment via handwheel with disc scale and pressure gauge for press force disp: <br/>electric stroke counter: <br/>control lights: <br/>automatic backflow control: <br/>guard grille for rear and lateral stand passages: <br/>sick light curtain control c-4000 standard 750 protective range height 750 mm: <br/>macrolone protective disc at the front, above c 4000: <br/>painting: struck varnish according to ral clay according to specification: <br/>two-hand security circuit: <br/>foot single hub shift: <br/>oil cooling as a water heat exchanger thermostatically controlled:2760 ?<br/>oil cooling as an air cooler:3960 ?<br/>sync control to link the press to feeding devices:710 ?<br/>press control as memory programmable control, type s7-1500 with siemens control display kp700:10980 ?<br/>pressure setting via kp 700:3780 ?<br/>dritrolled relief for operation with tool springs:1980 ?<br/><br/> PRESSURE:300 T
STROKE:150 MM
TABLE SURFACE AREA:830 X 920 MM
DIMENSIONS:1800 X 2120 X 3760 MM
TOTAL POWER REQUIREMENT:55 KW
WEIGHT OF THE MACHINE CA.:20 T
DAYLIGHT OPENING:600 MM
COLUMN DAYLIGHT:850 MM
STAND ROUND SIDE:400 MM
RAM HEAD WIDTH:820 MM
PLUNGER DEPTH:850 MM
T-SLOTS H 12 650:28 MM
ADJUSTABLE PRESSURE RETENTION TIME :0-6 SEC
TABLE HEIGHT ABOVE GROUND LEVEL:850 MM
TABLE FALL THROUGH HOLE:300 X 320 MM
SIEMENS CONTROL SYSTEM:
MECHANICAL FIXED STOP, HAND ADJUSTABLE:
START-UP LOCK-RESTART LOCK:
LOCKABLE OPERATING MODE SELECTOR SWITCH:
SET-UP-TAP, SENSITIVE IN SLOW MOTION:
NON-CONTACTING LIMIT SWITCHES FOR STROKE SETTING:
HUB SWITCHING SELECTABLE OFF-OR PRESSURE-DEPENDENT:
ADJUSTABLE PRESSURE ADJUSTMENT VIA HANDWHEEL WITH DISC SCALE AND PRESSURE GAUGE FOR PRESS FORCE DISP:
ELECTRIC STROKE COUNTER:
CONTROL LIGHTS:
AUTOMATIC BACKFLOW CONTROL:
GUARD GRILLE FOR REAR AND LATERAL STAND PASSAGES:
SICK LIGHT CURTAIN CONTROL C-4000 STANDARD 750 PROTECTIVE RANGE HEIGHT 750 MM:
MACROLONE PROTECTIVE DISC AT THE FRONT, ABOVE C 4000:
PAINTING: STRUCK VARNISH ACCORDING TO RAL CLAY ACCORDING TO SPECIFICATION:
TWO-HAND SECURITY CIRCUIT:
FOOT SINGLE HUB SHIFT:
OIL COOLING AS A WATER HEAT EXCHANGER THERMOSTATICALLY CONTROLLED:2760 ?
OIL COOLING AS AN AIR COOLER:3960 ?
SYNC CONTROL TO LINK THE PRESS TO FEEDING DEVICES:710 ?
PRESS CONTROL AS MEMORY PROGRAMMABLE CONTROL, TYPE S7-1500 WITH SIEMENS CONTROL DISPLAY KP700:10980 ?
PRESSURE SETTING VIA KP 700:3780 ?
DRITROLLED RELIEF FOR OPERATION WITH TOOL SPRINGS:1980 ?

Vendedor: Hidrobrasil GmbH
Año de construcción: usado
Ubicación: Land-to print performance 25
table 500 x 380 mm
height 380 mm
working stroke 100 mm
drive 7,5 kw
.
included:
2-hand release
-automatic cutting shock damping
-detailed description in the offer
.
-machine is handeinlegesicher and with new uvv testing TO PRINT PERFORMANCE 25 TABLE 500 X 380 MM HEIGHT 380 MM WORKING STROKE 100 MM DRIVE 7,5 KW . INCLUDED: 2-HAND RELEASE -AUTOMATIC CUTTING SHOCK DAMPING -DETAILED DESCRIPTION IN THE OFFER . -MACHINE IS HANDEINLEGESICHER AND WITH NEW UVV TESTING
Vendedor: Schrenk Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-pressure:200 t<br/>stroke:300 mm<br/>table surface area:1000 x 650 mm<br/>dimensions:1700 x 1300 x 3200 mm<br/>total power requirement:30 kw<br/>weight of the machine ca.:7 t<br/>daylight opening:600 mm<br/>column daylight:1050 mm<br/>stand round side:250 mm<br/>ram head width:720 mm<br/>plunger depth:560 mm<br/>t-slots h 12     650:22 mm<br/>adjustable pressure retention time :0-6 sec<br/>plunger bore, Ø h7:50 mm<br/>pulling power pullet cushion:500 kn<br/>pull surface pull cushion:600 x 350 mm<br/>hub pull cushion:100 mm<br/>table height above ground level:850 mm<br/>table diarrhea hole Ø, + hole image:250 mm<br/>mechanical fixed stop, hand adjustable: <br/>start-up lock-restart lock: <br/>lockable operating mode selector switch: <br/>set-up-tap, sensitive in slow motion: <br/>non-contacting limit switches for stroke setting: <br/>hub switching selectable off-or pressure-dependent: <br/>adjustable pressure adjustment via handwheel with disc scale and pressure gauge for press force disp: <br/>electric stroke counter: <br/>control lights: <br/>automatic backflow control: <br/>guard grille for rear and lateral stand passages: <br/>two-hand security circuit: <br/>foot single hub shift: <br/>engine hours counter: <br/>pulling cushion under the press table: <br/>sick light curtain control c-4000 standard 750 protective range height 750 mm: <br/>macrolone protective disc at the front, above c 4000: <br/>lacquering: structural varnish according to ral 7035: <br/>oil cooling as a water heat exchanger thermostatically controlled:2980 ?<br/>oil cooling as an air cooler:3360 ?<br/>sync control to link the press to feeding devices:760 ?<br/>dritrolled relief for operation with tool springs:1120 ?<br/>foot switch with plug:185 ?<br/>blowout device with adjustable blowing time:710 ?<br/>waldmann-machine light:195 ?<br/>press control as s7-1500 memory programmable control while maintaining lifting settings:4860 ?<br/>press control as a memory programmable s7-1500 control with siemens control display kp700:12860 ?<br/>pressure setting main cylinder via kp700 (only possible in conjunction with pos. 44):3570 ?<br/>pressure setting pulpit cushions via kp700 (only possible in conjunction with pos. 44):3570 ?<br/><br/> PRESSURE:200 T
STROKE:300 MM
TABLE SURFACE AREA:1000 X 650 MM
DIMENSIONS:1700 X 1300 X 3200 MM
TOTAL POWER REQUIREMENT:30 KW
WEIGHT OF THE MACHINE CA.:7 T
DAYLIGHT OPENING:600 MM
COLUMN DAYLIGHT:1050 MM
STAND ROUND SIDE:250 MM
RAM HEAD WIDTH:720 MM
PLUNGER DEPTH:560 MM
T-SLOTS H 12 650:22 MM
ADJUSTABLE PRESSURE RETENTION TIME :0-6 SEC
PLUNGER BORE, Ø H7:50 MM
PULLING POWER PULLET CUSHION:500 KN
PULL SURFACE PULL CUSHION:600 X 350 MM
HUB PULL CUSHION:100 MM
TABLE HEIGHT ABOVE GROUND LEVEL:850 MM
TABLE DIARRHEA HOLE Ø, + HOLE IMAGE:250 MM
MECHANICAL FIXED STOP, HAND ADJUSTABLE:
START-UP LOCK-RESTART LOCK:
LOCKABLE OPERATING MODE SELECTOR SWITCH:
SET-UP-TAP, SENSITIVE IN SLOW MOTION:
NON-CONTACTING LIMIT SWITCHES FOR STROKE SETTING:
HUB SWITCHING SELECTABLE OFF-OR PRESSURE-DEPENDENT:
ADJUSTABLE PRESSURE ADJUSTMENT VIA HANDWHEEL WITH DISC SCALE AND PRESSURE GAUGE FOR PRESS FORCE DISP:
ELECTRIC STROKE COUNTER:
CONTROL LIGHTS:
AUTOMATIC BACKFLOW CONTROL:
GUARD GRILLE FOR REAR AND LATERAL STAND PASSAGES:
TWO-HAND SECURITY CIRCUIT:
FOOT SINGLE HUB SHIFT:
ENGINE HOURS COUNTER:
PULLING CUSHION UNDER THE PRESS TABLE:
SICK LIGHT CURTAIN CONTROL C-4000 STANDARD 750 PROTECTIVE RANGE HEIGHT 750 MM:
MACROLONE PROTECTIVE DISC AT THE FRONT, ABOVE C 4000:
LACQUERING: STRUCTURAL VARNISH ACCORDING TO RAL 7035:
OIL COOLING AS A WATER HEAT EXCHANGER THERMOSTATICALLY CONTROLLED:2980 ?
OIL COOLING AS AN AIR COOLER:3360 ?
SYNC CONTROL TO LINK THE PRESS TO FEEDING DEVICES:760 ?
DRITROLLED RELIEF FOR OPERATION WITH TOOL SPRINGS:1120 ?
FOOT SWITCH WITH PLUG:185 ?
BLOWOUT DEVICE WITH ADJUSTABLE BLOWING TIME:710 ?
WALDMANN-MACHINE LIGHT:195 ?
PRESS CONTROL AS S7-1500 MEMORY PROGRAMMABLE CONTROL WHILE MAINTAINING LIFTING SETTINGS:4860 ?
PRESS CONTROL AS A MEMORY PROGRAMMABLE S7-1500 CONTROL WITH SIEMENS CONTROL DISPLAY KP700:12860 ?
PRESSURE SETTING MAIN CYLINDER VIA KP700 (ONLY POSSIBLE IN CONJUNCTION WITH POS. 44):3570 ?
PRESSURE SETTING PULPIT CUSHIONS VIA KP700 (ONLY POSSIBLE IN CONJUNCTION WITH POS. 44):3570 ?

Vendedor: Hidrobrasil GmbH
Año de construcción: usado
Ubicación: Land-pressing force: 160t, column width: 850mm, stroke: 400mm, ram surface: 800x700mm, ejector stroke: 300mm, security distance: 120mm, ejector pressure: 20t, max. overrun traverse: 14mm, table dimensions: 800x700mm, length: 1800mm, width: 1800mm, height: 4200mm, weight: 12t.  PRESSING FORCE: 160T, COLUMN WIDTH: 850MM, STROKE: 400MM, RAM SURFACE: 800X700MM, EJECTOR STROKE: 300MM, SECURITY DISTANCE: 120MM, EJECTOR PRESSURE: 20T, MAX. OVERRUN TRAVERSE: 14MM, TABLE DIMENSIONS: 800X700MM, LENGTH: 1800MM, WIDTH: 1800MM, HEIGHT: 4200MM, WEIGHT: 12T.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-pressure: 65 t<br/>throat: 220 mm<br/>stroke: 150 mm<br/>table surface area: 580x350 mm<br/>ram surface: 490x280 mm<br/>hole in the table: 180x180 mm<br/>table height: 860 mm<br/>tool hole in ram: Ø 40 mm<br/>weight of the machine ca.: 3,0 t<br/>dimensions of the machine ca.: 1300x1500x2500 mm<br/><br/><br/><br/><br/> PRESSURE: 65 T
THROAT: 220 MM
STROKE: 150 MM
TABLE SURFACE AREA: 580X350 MM
RAM SURFACE: 490X280 MM
HOLE IN THE TABLE: 180X180 MM
TABLE HEIGHT: 860 MM
TOOL HOLE IN RAM: Ø 40 MM
WEIGHT OF THE MACHINE CA.: 3,0 T
DIMENSIONS OF THE MACHINE CA.: 1300X1500X2500 MM




Vendedor: Maschinen Schwartpaul GmbH
Año de construcción: usado
Ubicación: Land-hydraulic swing arm cutting machines<br><br>die cutting machines for manual loading of materials and placement of dies are particularly useful for smaller batch sizes or smaller size parts.<br><br>schoen & cie modell n 1.1/4-1 <br>size 32 x 55 cm<br>table .50x93cm; good HYDRAULIC SWING ARM CUTTING MACHINES

DIE CUTTING MACHINES FOR MANUAL LOADING OF MATERIALS AND PLACEMENT OF DIES ARE PARTICULARLY USEFUL FOR SMALLER BATCH SIZES OR SMALLER SIZE PARTS.

SCHOEN & CIE MODELL N 1.1/4-1
SIZE 32 X 55 CM
TABLE .50X93CM; GOOD
Vendedor: 3p Vertriebsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-pressure total: 40 ton ram stroke: 150 mm daylight: 400 mm table surface area : 580 x 450 mm ram surface area: 490 x 280 mm side opening in the columns l ? r: 630 mm required power: 7,5 kw weight of machine approx.: 2,8 ton dimensions l x w x h: 1.550 x 1.400 x 2.470 mm PRESSURE TOTAL: 40 TON RAM STROKE: 150 MM DAYLIGHT: 400 MM TABLE SURFACE AREA : 580 X 450 MM RAM SURFACE AREA: 490 X 280 MM SIDE OPENING IN THE COLUMNS L ? R: 630 MM REQUIRED POWER: 7,5 KW WEIGHT OF MACHINE APPROX.: 2,8 TON DIMENSIONS L X W X H: 1.550 X 1.400 X 2.470 MM
Vendedor: Pressen HAAS GmbH
Año de construcción: usado
Precio: 164.000 €
Ubicación: Land-; good / operational ; GOOD / OPERATIONAL
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Ubicación: Land-pressure total: 65 ton stroke: 150 mm daylight: 400 mm table surface area : 480 x 350 mm ram surface area: 480 x 350 mm free frontal opening l-r: 550 mm required power: 4,5 kw dimensions l x w x h: 1.500 x 1.200 x 2.500 mm weight of machine approx.: 2,9 ton PRESSURE TOTAL: 65 TON STROKE: 150 MM DAYLIGHT: 400 MM TABLE SURFACE AREA : 480 X 350 MM RAM SURFACE AREA: 480 X 350 MM FREE FRONTAL OPENING L-R: 550 MM REQUIRED POWER: 4,5 KW DIMENSIONS L X W X H: 1.500 X 1.200 X 2.500 MM WEIGHT OF MACHINE APPROX.: 2,9 TON
Vendedor: Pressen HAAS GmbH
Año de construcción: usado
Ubicación: Land-double stand press hydraulic second-hand
make beautiful sh 12
year of construction 1980
pressure capacity 120 kn
table size 440 x 320 mm
height 330 mm
piston stroke 100 mm  DOUBLE STAND PRESS HYDRAULIC SECOND-HAND MAKE BEAUTIFUL SH 12 YEAR OF CONSTRUCTION 1980 PRESSURE CAPACITY 120 KN TABLE SIZE 440 X 320 MM HEIGHT 330 MM PISTON STROKE 100 MM
Vendedor: E-d-M GmbH
Año de construcción: usado
Ubicación: Land-pressure:200 t<br/>stroke:300 mm<br/>table surface area:1800 x 1000 mm<br/>dimensions:ca. 2800 x 2140 x 3600 mm<br/>total power requirement:30 kw<br/>pressure power:300 bar<br/>weight of the machine ca.:24 t<br/>daylight opening:600  mm<br/>column daylight:1850 mm<br/>stand round side:400 mm<br/>table height over floor, with pit for drawing pillow:850 mm<br/>table height over hallway, without pit for pull pillow:1150 mm<br/>ram head width:1850 mm<br/>plunger depth:820 mm<br/>t-slots h 12     650:22 mm<br/>hole pattern for drawing pillows:94 x Ø30 mm<br/>plunger bore, Ø h7:60 mm<br/>adjustable pressure retention time : sec<br/>siemens control system: <br/>mechanical fixed stop, hand adjustable: <br/>sick-light curtain control leuze mlc 750-protection range height 750 mm: <br/>start-up lock-restart lock: <br/>lockable operating mode selector switch: <br/>set-up-tap, sensitive in slow motion: <br/>non-contacting limit switches for stroke setting: <br/>hub switching selectable off-or pressure-dependent: <br/>adjustable pressure adjustment via handwheel with disc scale and pressure gauge for press force disp: <br/>electric stroke counter: <br/>control lights: <br/>makrolon-protective glass front, above the light barrier: <br/>automatic backflow control: <br/>guard grille for rear and lateral stand passages: <br/><br/> PRESSURE:200 T
STROKE:300 MM
TABLE SURFACE AREA:1800 X 1000 MM
DIMENSIONS:CA. 2800 X 2140 X 3600 MM
TOTAL POWER REQUIREMENT:30 KW
PRESSURE POWER:300 BAR
WEIGHT OF THE MACHINE CA.:24 T
DAYLIGHT OPENING:600 MM
COLUMN DAYLIGHT:1850 MM
STAND ROUND SIDE:400 MM
TABLE HEIGHT OVER FLOOR, WITH PIT FOR DRAWING PILLOW:850 MM
TABLE HEIGHT OVER HALLWAY, WITHOUT PIT FOR PULL PILLOW:1150 MM
RAM HEAD WIDTH:1850 MM
PLUNGER DEPTH:820 MM
T-SLOTS H 12 650:22 MM
HOLE PATTERN FOR DRAWING PILLOWS:94 X Ø30 MM
PLUNGER BORE, Ø H7:60 MM
ADJUSTABLE PRESSURE RETENTION TIME : SEC
SIEMENS CONTROL SYSTEM:
MECHANICAL FIXED STOP, HAND ADJUSTABLE:
SICK-LIGHT CURTAIN CONTROL LEUZE MLC 750-PROTECTION RANGE HEIGHT 750 MM:
START-UP LOCK-RESTART LOCK:
LOCKABLE OPERATING MODE SELECTOR SWITCH:
SET-UP-TAP, SENSITIVE IN SLOW MOTION:
NON-CONTACTING LIMIT SWITCHES FOR STROKE SETTING:
HUB SWITCHING SELECTABLE OFF-OR PRESSURE-DEPENDENT:
ADJUSTABLE PRESSURE ADJUSTMENT VIA HANDWHEEL WITH DISC SCALE AND PRESSURE GAUGE FOR PRESS FORCE DISP:
ELECTRIC STROKE COUNTER:
CONTROL LIGHTS:
MAKROLON-PROTECTIVE GLASS FRONT, ABOVE THE LIGHT BARRIER:
AUTOMATIC BACKFLOW CONTROL:
GUARD GRILLE FOR REAR AND LATERAL STAND PASSAGES:

Vendedor: Hidrobrasil GmbH
Año de construcción: usado
Ubicación: Land-hydraulic press good sh/lf 300
make; schã¶n
45527 hattingen/ruhr
model; sh/lf
pressing force 300 t

year of construction; 1980
weight; 14000 kg
mass; 2, 6m x 2m x 3, 8m

contact mr. saeed

see also our over 200 more offers. click on
"more offers of this provider"
(changes and errors in the technical data, information
and prices and subject to prior sale!) HYDRAULIC PRESS GOOD SH/LF 300 MAKE; SCH&ATILDE;&PARA;N 45527 HATTINGEN/RUHR MODEL; SH/LF PRESSING FORCE 300 T YEAR OF CONSTRUCTION; 1980 WEIGHT; 14000 KG MASS; 2, 6M X 2M X 3, 8M CONTACT MR. SAEED SEE ALSO OUR OVER 200 MORE OFFERS. CLICK ON "MORE OFFERS OF THIS PROVIDER" (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-pressure: 75 t<br/>distance between columns: 600 mm<br/>stroke: 150 mm<br/>table surface area: 580x410 mm<br/>ram surface: Ø 300 mm<br/>tool hole in ram: Ø 50 mm<br/>hole in the table: Ø 100 mm<br/>table height: 850 mm<br/>weight of the machine ca.: 6 t<br/>dimensions of the machine ca.: 1500x1500x2600 mm<br/><br/><br/><br/><br/> PRESSURE: 75 T
DISTANCE BETWEEN COLUMNS: 600 MM
STROKE: 150 MM
TABLE SURFACE AREA: 580X410 MM
RAM SURFACE: Ø 300 MM
TOOL HOLE IN RAM: Ø 50 MM
HOLE IN THE TABLE: Ø 100 MM
TABLE HEIGHT: 850 MM
WEIGHT OF THE MACHINE CA.: 6 T
DIMENSIONS OF THE MACHINE CA.: 1500X1500X2600 MM




Vendedor: Maschinen Schwartpaul GmbH
Año de construcción: usado
Ubicación: Land-hydraulic double straightside press schoen sh 30
year of construction 1989
30 to.
580 x 320 mm clamping surface
height 280 mm
stand width 630 mm
max stroke 100 mm
table diarrhea hole 150 x 250 mm  HYDRAULIC DOUBLE STRAIGHTSIDE PRESS SCHOEN SH 30 YEAR OF CONSTRUCTION 1989 30 TO. 580 X 320 MM CLAMPING SURFACE HEIGHT 280 MM STAND WIDTH 630 MM MAX STROKE 100 MM TABLE DIARRHEA HOLE 150 X 250 MM
Vendedor: E-d-M GmbH
Año de construcción: usado
Ubicación: Land-pressure: 100 t<br/>stroke: 150 mm<br/>table surface area: 580x450 mm<br/>ram surface: 600x400 mm<br/>hole in the table: 200x120 mm<br/>table height: 850 mm<br/>tool hole in ram: Ø 60 mm<br/>weight of the machine ca.: 8 t<br/>dimensions of the machine ca.: 2100x1500x2700 mm<br/><br/><br/><br/><br/> PRESSURE: 100 T
STROKE: 150 MM
TABLE SURFACE AREA: 580X450 MM
RAM SURFACE: 600X400 MM
HOLE IN THE TABLE: 200X120 MM
TABLE HEIGHT: 850 MM
TOOL HOLE IN RAM: Ø 60 MM
WEIGHT OF THE MACHINE CA.: 8 T
DIMENSIONS OF THE MACHINE CA.: 2100X1500X2700 MM




Vendedor: Maschinen Schwartpaul GmbH
Año de construcción: usado
Ubicación: Land-hydraulic double straightside press nice ute/pz 300
pressing force: 3,000 kn (to 300.)
table: 545 x 545 mm
height: 350 mm
stroke: 150 mm
machine abm. 1200 b x 1400 t x 2950 h
weight: ca. 5 tons.
	
  HYDRAULIC DOUBLE STRAIGHTSIDE PRESS NICE UTE/PZ 300 PRESSING FORCE: 3,000 KN (TO 300.) TABLE: 545 X 545 MM HEIGHT: 350 MM STROKE: 150 MM MACHINE ABM. 1200 B X 1400 T X 2950 H WEIGHT: CA. 5 TONS.
Vendedor: E-d-M GmbH
Año de construcción: usado
Ubicación: Land-pressure: 200 t<br/>stroke: 150 mm<br/>table surface area: 850x650 mm<br/>ram surface: 730x560 mm<br/>weight of the machine ca.: 8 t<br/>dimensions of the machine ca.: bxtxh 2000x2500x3600mm m<br/><br/><br/><br/><br/> PRESSURE: 200 T
STROKE: 150 MM
TABLE SURFACE AREA: 850X650 MM
RAM SURFACE: 730X560 MM
WEIGHT OF THE MACHINE CA.: 8 T
DIMENSIONS OF THE MACHINE CA.: BXTXH 2000X2500X3600MM M




Vendedor: Maschinen Schwartpaul GmbH
Año de construcción: usado
Precio: 5.000 €
Ubicación: Land-operating voltage: 380/400 volts, power: 1,1 kw, force 5 kn, safety distance: 100 mm, min., stopping factory 10 mm, max.

errors excepted!      OPERATING VOLTAGE: 380/400 VOLTS, POWER: 1,1 KW, FORCE 5 KN, SAFETY DISTANCE: 100 MM, MIN., STOPPING FACTORY 10 MM, MAX. ERRORS EXCEPTED!
Vendedor: Ingenieurbüro Lenhart
Año de construcción: usado
Ubicación: Land-pressure: 16 t<br/>throat: 250 mm<br/>stroke: 100 mm<br/>table surface area: 500x400 mm<br/>ram surface: 470x250 mm<br/>hole in the table: Ø 90 mm<br/>table height: 850 mm<br/>tool hole in ram: Ø 40 mm<br/>weight of the machine ca.: 2,5 t<br/>dimensions of the machine ca.: bxtxh 1200x1600x2200 mm<br/><br/><br/><br/><br/> PRESSURE: 16 T
THROAT: 250 MM
STROKE: 100 MM
TABLE SURFACE AREA: 500X400 MM
RAM SURFACE: 470X250 MM
HOLE IN THE TABLE: Ø 90 MM
TABLE HEIGHT: 850 MM
TOOL HOLE IN RAM: Ø 40 MM
WEIGHT OF THE MACHINE CA.: 2,5 T
DIMENSIONS OF THE MACHINE CA.: BXTXH 1200X1600X2200 MM




Vendedor: Maschinen Schwartpaul GmbH
Año de construcción: usado
Precio: 6.000 €
Ubicación: Land-operating voltage: 380/400 v, power: 1.5 kw, force 5 kn, clearance: 180 mm, min., trailing plant 12 mm, max.

errors excepted!      OPERATING VOLTAGE: 380/400 V, POWER: 1.5 KW, FORCE 5 KN, CLEARANCE: 180 MM, MIN., TRAILING PLANT 12 MM, MAX. ERRORS EXCEPTED!
Vendedor: Ingenieurbüro Lenhart
Año de construcción: usado
Ubicación: Land-pressure: 25 t<br/>throat: 250 mm<br/>stroke: 100 mm<br/>ram surface: 500x400 mm<br/>hole in the table: Ø 110 mm<br/>table height: 850 mm<br/>tool hole in ram: Ø 40 mm<br/>ram surface: Ø 150 mm<br/>weight of the machine ca.: 2,5 t<br/>dimensions of the machine ca.: 1500x2000x2200 mm<br/><br/><br/><br/><br/> PRESSURE: 25 T
THROAT: 250 MM
STROKE: 100 MM
RAM SURFACE: 500X400 MM
HOLE IN THE TABLE: Ø 110 MM
TABLE HEIGHT: 850 MM
TOOL HOLE IN RAM: Ø 40 MM
RAM SURFACE: Ø 150 MM
WEIGHT OF THE MACHINE CA.: 2,5 T
DIMENSIONS OF THE MACHINE CA.: 1500X2000X2200 MM




Vendedor: Maschinen Schwartpaul GmbH
Año de construcción: usado
Ubicación: Land-pressure: 160 t<br/>distance between columns: 850 mm<br/>stroke: 400 mm<br/>ram surface: 800x700 mm<br/>: 300 mm<br/>pressure of ejector: 20 t<br/>table surface area: 800x700 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 12 t<br/>dimensions of the machine ca.: 1800x1800x4200 m<br/><br/><br/><br/><br/> PRESSURE: 160 T
DISTANCE BETWEEN COLUMNS: 850 MM
STROKE: 400 MM
RAM SURFACE: 800X700 MM
: 300 MM
PRESSURE OF EJECTOR: 20 T
TABLE SURFACE AREA: 800X700 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 12 T
DIMENSIONS OF THE MACHINE CA.: 1800X1800X4200 M




Vendedor: Maschinen Schwartpaul GmbH
Año de construcción: usado
Ubicación: Land-pressure: 200 t<br/>distance between columns: 500 mm<br/>stroke: 150 mm<br/>ram surface: 320 mm<br/>table surface area: 470x400 mm<br/>weight of the machine ca.: 12 t<br/>dimensions of the machine ca.: 2000x2000x2700 mm<br/><br/><br/><br/><br/> PRESSURE: 200 T
DISTANCE BETWEEN COLUMNS: 500 MM
STROKE: 150 MM
RAM SURFACE: 320 MM
TABLE SURFACE AREA: 470X400 MM
WEIGHT OF THE MACHINE CA.: 12 T
DIMENSIONS OF THE MACHINE CA.: 2000X2000X2700 MM




Vendedor: Maschinen Schwartpaul GmbH
Año de construcción: usado
Ubicación: Land-pressure: 25 t<br/>distance between columns: 500 mm<br/>stroke: 100 mm<br/>dayligth: 280 mm<br/>table surface area: 440x320 mm<br/>ram surface: 460x240 mm<br/>hole in the table: Ø 100 mm<br/>table height: 850 mm<br/>tool hole in ram: Ø 40 mm<br/>total power requirement: 4,0 kw<br/>weight of the machine ca.: 1,0 t<br/>dimensions of the machine ca.: 1000x1000x2000 mm<br/><br/><br/><br/><br/> PRESSURE: 25 T
DISTANCE BETWEEN COLUMNS: 500 MM
STROKE: 100 MM
DAYLIGTH: 280 MM
TABLE SURFACE AREA: 440X320 MM
RAM SURFACE: 460X240 MM
HOLE IN THE TABLE: Ø 100 MM
TABLE HEIGHT: 850 MM
TOOL HOLE IN RAM: Ø 40 MM
TOTAL POWER REQUIREMENT: 4,0 KW
WEIGHT OF THE MACHINE CA.: 1,0 T
DIMENSIONS OF THE MACHINE CA.: 1000X1000X2000 MM




Vendedor: Maschinen Schwartpaul GmbH
Año de construcción: usado
Ubicación: Land-pressure: 300 t<br/>distance between columns: 1200 mm<br/>stroke: 300 mm<br/>column travel -side: 650 mm<br/>dayligth: 700 mm<br/>table surface area: 1180 x 1150 mm<br/>adjustment of stroke: 300 mm<br/>dimension of ram: 1200 x 1150 mm<br/>hole in the table: 610 x 510 mm<br/>quantity of oil: 1300 l<br/>total power requirement: 60,00 kw<br/>weight of the machine ca.: 12 t<br/>dimensions of the machine ca.: 3,00 x 4,80 x h4,20 m<br/>2 pressure stages, air cooler Öka-l4, damping, parallel bracket.<br/>with reel (schön zv 400) and sheet straightening apparatus. no drawing pillow!<br/>price is from location!<br/><br/><br/><br/><br/> PRESSURE: 300 T
DISTANCE BETWEEN COLUMNS: 1200 MM
STROKE: 300 MM
COLUMN TRAVEL -SIDE: 650 MM
DAYLIGTH: 700 MM
TABLE SURFACE AREA: 1180 X 1150 MM
ADJUSTMENT OF STROKE: 300 MM
DIMENSION OF RAM: 1200 X 1150 MM
HOLE IN THE TABLE: 610 X 510 MM
QUANTITY OF OIL: 1300 L
TOTAL POWER REQUIREMENT: 60,00 KW
WEIGHT OF THE MACHINE CA.: 12 T
DIMENSIONS OF THE MACHINE CA.: 3,00 X 4,80 X H4,20 M
2 PRESSURE STAGES, AIR COOLER ÖKA-L4, DAMPING, PARALLEL BRACKET.
WITH REEL (SCHöN ZV 400) AND SHEET STRAIGHTENING APPARATUS. NO DRAWING PILLOW!
PRICE IS FROM LOCATION!




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-pressure:0200 t<br/>distance between columns:1050 mm<br/>stroke:150 mm<br/>distance table/ram, max. stroke up, adjustment up:450 mm<br/>table surface area:1000 x 1200 mm<br/>table height over floor:850 mm<br/>side window:500 mm<br/>ram surface:1050 x 870 mm<br/>speed down:300 mm/s<br/>speed up:300 mm/s<br/>working speed:18 - 36 mm/s<br/>oil volume: l<br/>power requirement:37,0 kw<br/>weight:16,0 t<br/>dimensions (wxdxh):4,0 x 3,6 x 3,4 m<br/>list price: in running function in our warehouse: <br/>german safety: permitted for manual loading:uvv 11.064 - vbg 7n5.2 <br/>new electrical cabinet:yom 2008 <br/>drawing cushion in table:hydraulisch <br/>conrollable dependant on pressure/time and way: <br/>ram interlocking: <br/>cutting impact cushioning:hydraulisch <br/>two-hand operation: <br/>foundation pit:nicht erforderlich <br/><br/> PRESSURE:0200 T
DISTANCE BETWEEN COLUMNS:1050 MM
STROKE:150 MM
DISTANCE TABLE/RAM, MAX. STROKE UP, ADJUSTMENT UP:450 MM
TABLE SURFACE AREA:1000 X 1200 MM
TABLE HEIGHT OVER FLOOR:850 MM
SIDE WINDOW:500 MM
RAM SURFACE:1050 X 870 MM
SPEED DOWN:300 MM/S
SPEED UP:300 MM/S
WORKING SPEED:18 - 36 MM/S
OIL VOLUME: L
POWER REQUIREMENT:37,0 KW
WEIGHT:16,0 T
DIMENSIONS (WXDXH):4,0 X 3,6 X 3,4 M
LIST PRICE: IN RUNNING FUNCTION IN OUR WAREHOUSE:
GERMAN SAFETY: PERMITTED FOR MANUAL LOADING:UVV 11.064 - VBG 7N5.2
NEW ELECTRICAL CABINET:YOM 2008
DRAWING CUSHION IN TABLE:HYDRAULISCH
CONROLLABLE DEPENDANT ON PRESSURE/TIME AND WAY:
RAM INTERLOCKING:
CUTTING IMPACT CUSHIONING:HYDRAULISCH
TWO-HAND OPERATION:
FOUNDATION PIT:NICHT ERFORDERLICH

Vendedor: Vögtle Service GmbH
Año de construcción: usado
Ubicación: Land-pressure:060 t<br/>throat:400 mm<br/>stroke:600 mm<br/>distance table/ram, stroke up:700 mm<br/>table surface area:1120 x 700 mm<br/>table height over floor:850 mm<br/>ram surface:700 x 700 mm<br/>oil volume:275 l<br/>power capacity:7,5 kw<br/>weight:7,3 t<br/>dimensions (wxdxh):1,6 x 2,0 x 3,7 m<br/>list price: in running function in our warehouse: <br/>list price: in running function in our warehouse: <br/>german safety: permitted for manual loading:uvv 11.064 - vbg 7n5.2 § 20 <br/><br/> PRESSURE:060 T
THROAT:400 MM
STROKE:600 MM
DISTANCE TABLE/RAM, STROKE UP:700 MM
TABLE SURFACE AREA:1120 X 700 MM
TABLE HEIGHT OVER FLOOR:850 MM
RAM SURFACE:700 X 700 MM
OIL VOLUME:275 L
POWER CAPACITY:7,5 KW
WEIGHT:7,3 T
DIMENSIONS (WXDXH):1,6 X 2,0 X 3,7 M
LIST PRICE: IN RUNNING FUNCTION IN OUR WAREHOUSE:
LIST PRICE: IN RUNNING FUNCTION IN OUR WAREHOUSE:
GERMAN SAFETY: PERMITTED FOR MANUAL LOADING:UVV 11.064 - VBG 7N5.2 § 20

Vendedor: Vögtle Service GmbH
Año de construcción: usado
Ubicación: Land-pressure:0500 t<br/>distance between columns:1200 mm<br/>stroke:300 mm<br/>distance table/ram, stroke up:1000 mm<br/>table surface area:1150 x 1300 mm<br/>table height over floor:850 mm<br/>column travel -side:750 mm<br/>ram surface:1200 x 1180 mm<br/>power requirement:75,0 kw<br/>weight:40,0 t<br/>dimensions (wxdxh):2,95 x 3,0 x 4,15 m<br/>list price: in running function in our warehouse: <br/>german safety: permitted only for safe tools: <br/>conrollable dependant on pressure/time and way: <br/>cutting impact absorption:hydraulic <br/><br/> PRESSURE:0500 T
DISTANCE BETWEEN COLUMNS:1200 MM
STROKE:300 MM
DISTANCE TABLE/RAM, STROKE UP:1000 MM
TABLE SURFACE AREA:1150 X 1300 MM
TABLE HEIGHT OVER FLOOR:850 MM
COLUMN TRAVEL -SIDE:750 MM
RAM SURFACE:1200 X 1180 MM
POWER REQUIREMENT:75,0 KW
WEIGHT:40,0 T
DIMENSIONS (WXDXH):2,95 X 3,0 X 4,15 M
LIST PRICE: IN RUNNING FUNCTION IN OUR WAREHOUSE:
GERMAN SAFETY: PERMITTED ONLY FOR SAFE TOOLS:
CONROLLABLE DEPENDANT ON PRESSURE/TIME AND WAY:
CUTTING IMPACT ABSORPTION:HYDRAULIC

Vendedor: Vögtle Service GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more SCHOEN types: