93 ofertas

Año de construcción: usado
Ubicación: Land-pressing force: 160t, stroke length: 500mm, tool dimensions: 250-2400x650-1500mm, ram speed: 25-400mm/s, was overhauled in 2010.  PRESSING FORCE: 160T, STROKE LENGTH: 500MM, TOOL DIMENSIONS: 250-2400X650-1500MM, RAM SPEED: 25-400MM/S, WAS OVERHAULED IN 2010.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-: 200 to<br/>: 2.000 x 1.000 mm<br/>: 1.800 x 1.000 mm<br/>: 300 mm<br/>: 550 mm<br/>: 2.000 mm<br/>: 1.000 mm<br/>: 400 mm<br/>: 2.900 mm<br/>: 1.400 mm<br/>: 5.700 mm<br/>: 20.000 kg<br/>two hand operation<br/>central lubrication for ram guide<br/>light curtain on the front<br/>approved for hand insertion<br/>pressure/time- and travel dependent adjustable<br/>no users manual (documents about conversion, circuit diagrams available)<br/><br/>does comply with industrial safety regulations (amvo &, uvv) after complete conversion by company rosteck in 1998<br/><br/>revision of main cylinder by company schuler in 2017<br/><br/><br/><br/><br/>pressforce: 200 to<br/>table: 2.000 x 1.000 mm<br/>ram dimension: 	1.800 x 1.000 mm<br/>stroke: 300 mm<br/>distance ram-table: 550 mm<br/>rapid speed: 300 mm/sek.<br/>diatance between columns: 2.000 mm<br/>cushion in table: 1.550 x 650 mm, pressforce 40 to<br/>table height above ground level ca.: 1.000 mm<br/>lateral column pass: 400 mm<br/>length: 2.900 mm<br/>width: 1.400 mm<br/>height: 5.700 mm<br/>weight: 20.000 kg<br/><br/><br/><br/> : 200 TO
: 2.000 X 1.000 MM
: 1.800 X 1.000 MM
: 300 MM
: 550 MM
: 2.000 MM
: 1.000 MM
: 400 MM
: 2.900 MM
: 1.400 MM
: 5.700 MM
: 20.000 KG
TWO HAND OPERATION
CENTRAL LUBRICATION FOR RAM GUIDE
LIGHT CURTAIN ON THE FRONT
APPROVED FOR HAND INSERTION
PRESSURE/TIME- AND TRAVEL DEPENDENT ADJUSTABLE
NO USERS MANUAL (DOCUMENTS ABOUT CONVERSION, CIRCUIT DIAGRAMS AVAILABLE)

DOES COMPLY WITH INDUSTRIAL SAFETY REGULATIONS (AMVO &, UVV) AFTER COMPLETE CONVERSION BY COMPANY ROSTECK IN 1998

REVISION OF MAIN CYLINDER BY COMPANY SCHULER IN 2017




PRESSFORCE: 200 TO
TABLE: 2.000 X 1.000 MM
RAM DIMENSION: 1.800 X 1.000 MM
STROKE: 300 MM
DISTANCE RAM-TABLE: 550 MM
RAPID SPEED: 300 MM/SEK.
DIATANCE BETWEEN COLUMNS: 2.000 MM
CUSHION IN TABLE: 1.550 X 650 MM, PRESSFORCE 40 TO
TABLE HEIGHT ABOVE GROUND LEVEL CA.: 1.000 MM
LATERAL COLUMN PASS: 400 MM
LENGTH: 2.900 MM
WIDTH: 1.400 MM
HEIGHT: 5.700 MM
WEIGHT: 20.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-there are three identical machines available, pressing force: 160t, stroke length: 1000mm, tool dimensions: 250-1050x350-1200mm, connected load: 50kw, was overhauled in 2013.  THERE ARE THREE IDENTICAL MACHINES AVAILABLE, PRESSING FORCE: 160T, STROKE LENGTH: 1000MM, TOOL DIMENSIONS: 250-1050X350-1200MM, CONNECTED LOAD: 50KW, WAS OVERHAULED IN 2013.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-pressure:80 t<br/>throat: mm<br/>stroke:50 mm<br/>table area:875 x 695 mm<br/>ram surface:350 x 355 mm<br/>distance between columns:450 mm<br/>ram adjustment:71 mm<br/>no. of strokes:30 - 90 hub/min<br/>distance between table and ram (stroke down, adjustment up):480 mm<br/>total power requirement: kw<br/>weight of the machine ca.:6,2 t<br/>dimensions of the machine ca.:2,0 x 2,1 x 3,2 m<br/><br/> PRESSURE:80 T
THROAT: MM
STROKE:50 MM
TABLE AREA:875 X 695 MM
RAM SURFACE:350 X 355 MM
DISTANCE BETWEEN COLUMNS:450 MM
RAM ADJUSTMENT:71 MM
NO. OF STROKES:30 - 90 HUB/MIN
DISTANCE BETWEEN TABLE AND RAM (STROKE DOWN, ADJUSTMENT UP):480 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.:6,2 T
DIMENSIONS OF THE MACHINE CA.:2,0 X 2,1 X 3,2 M

Vendedor: Ambold Pressen GmbH
Año de construcción: usado
Ubicación: Land-pressing force: 160t, connected load: 59kw, was completely overhauled in 2016.  PRESSING FORCE: 160T, CONNECTED LOAD: 59KW, WAS COMPLETELY OVERHAULED IN 2016.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 400 €
Ubicación: Land-weight approx.: 1500 kg<br/>dimensions (l x w x h) approx.: 1500 x 1300 x 1950 mm<br/>description: inventory number 171044, pressing force 12.5 t, ram stroke 60 mm, with swivelling upper part, special device for processing of chain links, light barrer safety device, sheet decoiler, 4 machine shoes, foot release, with documentation (machine number does not match) WEIGHT APPROX.: 1500 KG
DIMENSIONS (L X W X H) APPROX.: 1500 X 1300 X 1950 MM
DESCRIPTION: INVENTORY NUMBER 171044, PRESSING FORCE 12.5 T, RAM STROKE 60 MM, WITH SWIVELLING UPPER PART, SPECIAL DEVICE FOR PROCESSING OF CHAIN LINKS, LIGHT BARRER SAFETY DEVICE, SHEET DECOILER, 4 MACHINE SHOES, FOOT RELEASE, WITH DOCUMENTATION (MACHINE NUMBER DOES NOT MATCH)
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 675.000 €
Ubicación: Land-press line
1 clearing 1100t + 800t
5 schuler 500t
8 abb robots PRESS LINE 1 CLEARING 1100T + 800T 5 SCHULER 500T 8 ABB ROBOTS
Vendedor: Macoab Homat S.L.
Año de construcción: usado
Precio: used machinery auction RESALE 400 €
Ubicación: Land-weight approx.: 1500 kg<br/>dimensions (l x w x h) approx.: 1100 x 1200 x 1900 mm<br/>description: pressing power 12.5 t, output 1.1 hp,ram stroke 6 to 60 mm, table approx. 480 x 280 mm, with protective screen control schwarz and swivelling upper part WEIGHT APPROX.: 1500 KG
DIMENSIONS (L X W X H) APPROX.: 1100 X 1200 X 1900 MM
DESCRIPTION: PRESSING POWER 12.5 T, OUTPUT 1.1 HP,RAM STROKE 6 TO 60 MM, TABLE APPROX. 480 X 280 MM, WITH PROTECTIVE SCREEN CONTROL SCHWARZ AND SWIVELLING UPPER PART
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-we have for sale a very nice schuler press, mechanic press, great condition, force: 1200t, single action, table 4800 x 2700 mm WE HAVE FOR SALE A VERY NICE SCHULER PRESS, MECHANIC PRESS, GREAT CONDITION, FORCE: 1200T, SINGLE ACTION, TABLE 4800 X 2700 MM
Vendedor: GORBREX Machinery Trade Sp.z o.o.
Año de construcción: usado
Precio: used machinery auction RESALE 400 €
Ubicación: Land-weight approx.: 1500 kg<br/>dimensions (l x w x h) approx.: 1500 x 1300 x 1950 mm<br/>description: inventory number 171041, pressing force 12.5 t, ram stroke 60 mm, with swivelling upper part, special device for processing of chain links, light barrier safety device, sheet decoiler, 4 machine shoes, foot release, with documentation (machine number does not match) WEIGHT APPROX.: 1500 KG
DIMENSIONS (L X W X H) APPROX.: 1500 X 1300 X 1950 MM
DESCRIPTION: INVENTORY NUMBER 171041, PRESSING FORCE 12.5 T, RAM STROKE 60 MM, WITH SWIVELLING UPPER PART, SPECIAL DEVICE FOR PROCESSING OF CHAIN LINKS, LIGHT BARRIER SAFETY DEVICE, SHEET DECOILER, 4 MACHINE SHOES, FOOT RELEASE, WITH DOCUMENTATION (MACHINE NUMBER DOES NOT MATCH)
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-.
to power 25
stroke rate 125/min
.
table 500 x 460 mm
throat depth 250 mm
stroke adjustment of 8-60 mm
tappet adjustment 50 mm
height of 340 mm
.
drive 1.5 kw
width x depth x height approx. 0.9 x 1.3 m x 2 m
.
-adjustable table
-foot switch with pneumatic release
.
 . TO POWER 25 STROKE RATE 125/MIN . TABLE 500 X 460 MM THROAT DEPTH 250 MM STROKE ADJUSTMENT OF 8-60 MM TAPPET ADJUSTMENT 50 MM HEIGHT OF 340 MM . DRIVE 1.5 KW WIDTH X DEPTH X HEIGHT APPROX. 0.9 X 1.3 M X 2 M . -ADJUSTABLE TABLE -FOOT SWITCH WITH PNEUMATIC RELEASE .
Vendedor: Schrenk Werkzeugmaschinen
Año de construcción: usado
Precio: used machinery auction RESALE 400 €
Ubicación: Land-weight approx.: 1500 kg<br/>dimensions (l x w x h) approx.: 1800 x 1200 x 2000 mm<br/>description: inventory number 171042, pressing force 20 t, stroke speed 125/min, ram stroke 8 to 80 mm, upper part of the machine is swivelling, column outreach approx. 200 mm, with belt unwinder, special tool for chain link processing, footswitch, 4 machine shoes, unidor tool monitoring un 6, light barriers WEIGHT APPROX.: 1500 KG
DIMENSIONS (L X W X H) APPROX.: 1800 X 1200 X 2000 MM
DESCRIPTION: INVENTORY NUMBER 171042, PRESSING FORCE 20 T, STROKE SPEED 125/MIN, RAM STROKE 8 TO 80 MM, UPPER PART OF THE MACHINE IS SWIVELLING, COLUMN OUTREACH APPROX. 200 MM, WITH BELT UNWINDER, SPECIAL TOOL FOR CHAIN LINK PROCESSING, FOOTSWITCH, 4 MACHINE SHOES, UNIDOR TOOL MONITORING UN 6, LIGHT BARRIERS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 1.000 €
Ubicación: Land-.
data as per nameplate
.
machine has a crack in the eccentric shaft!
.
is offered to slaughter out!
.
................................................................................................. . DATA AS PER NAMEPLATE . MACHINE HAS A CRACK IN THE ECCENTRIC SHAFT! . IS OFFERED TO SLAUGHTER OUT! . .................................................................................................
Vendedor: Schrenk Werkzeugmaschinen
Año de construcción: usado
Precio: used machinery auction RESALE 400 €
Ubicación: Land-weight approx.: 1500 kg<br/>dimensions (l x w x h) approx.: 1800 x 1200 x 2000 mm<br/>description: inventory number 171046, pressing force 20 t, stroke speed 125/min, ram stroke 8 to 80 mm, upper part of the machine is swivelling, column outreach approx. 200 mm, with belt unwinder, special tools for chain link processing, footswitch, 4 machine shoes, unidor tool monitoring un 6, light barriers WEIGHT APPROX.: 1500 KG
DIMENSIONS (L X W X H) APPROX.: 1800 X 1200 X 2000 MM
DESCRIPTION: INVENTORY NUMBER 171046, PRESSING FORCE 20 T, STROKE SPEED 125/MIN, RAM STROKE 8 TO 80 MM, UPPER PART OF THE MACHINE IS SWIVELLING, COLUMN OUTREACH APPROX. 200 MM, WITH BELT UNWINDER, SPECIAL TOOLS FOR CHAIN LINK PROCESSING, FOOTSWITCH, 4 MACHINE SHOES, UNIDOR TOOL MONITORING UN 6, LIGHT BARRIERS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-four pillar press 12, 5to schuler presse pressure power punch

four pillar press of schuler

according to the rating plate to 12.5

the machine was taken out of production some years ago because the production ran out.

since you stand in the camp.
we have taken it over so and sell them exactly so; unchecked - as"tinkering" or obtaining spare parts.

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)  FOUR PILLAR PRESS 12, 5TO SCHULER PRESSE PRESSURE POWER PUNCH FOUR PILLAR PRESS OF SCHULER ACCORDING TO THE RATING PLATE TO 12.5 THE MACHINE WAS TAKEN OUT OF PRODUCTION SOME YEARS AGO BECAUSE THE PRODUCTION RAN OUT. SINCE YOU STAND IN THE CAMP. WE HAVE TAKEN IT OVER SO AND SELL THEM EXACTLY SO; UNCHECKED - AS"TINKERING" OR OBTAINING SPARE PARTS. CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Precio: used machinery auction RESALE 400 €
Ubicación: Land-weight approx.: 1500 kg<br/>dimensions (l x w x h) approx.: 1800 x 1200 x 2000 mm<br/>description: pressing force 20 t, stroke speed 125/min, ram stroke 8 to 80 mm, upper part of the machine is swivelling, column outreach approx. 200 mm, with belt unwinder, special tools for chain link processing, footswitch, 4 machine shoes, unidor tool monitoring un 6, light barriers WEIGHT APPROX.: 1500 KG
DIMENSIONS (L X W X H) APPROX.: 1800 X 1200 X 2000 MM
DESCRIPTION: PRESSING FORCE 20 T, STROKE SPEED 125/MIN, RAM STROKE 8 TO 80 MM, UPPER PART OF THE MACHINE IS SWIVELLING, COLUMN OUTREACH APPROX. 200 MM, WITH BELT UNWINDER, SPECIAL TOOLS FOR CHAIN LINK PROCESSING, FOOTSWITCH, 4 MACHINE SHOES, UNIDOR TOOL MONITORING UN 6, LIGHT BARRIERS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-pressing force: 3500kn, stroke: 400mm, stroke speed: 16/min, adjustment: 300mm, frame opening: 2140mm, table dimensions: 2100x1420mm.  PRESSING FORCE: 3500KN, STROKE: 400MM, STROKE SPEED: 16/MIN, ADJUSTMENT: 300MM, FRAME OPENING: 2140MM, TABLE DIMENSIONS: 2100X1420MM.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 400 €
Ubicación: Land-weight approx.: 1500 kg<br/>dimensions (l x w x h) approx.: 1800 x 1200 x 2000 mm<br/>description: inventory number 111034, press force 20 t, lifting speed 125/min, ram stroke 8 to 80 mm, upper part of the machine is swivelling, column outreach approx. 200 mm, with belt unwinder, special tools for chain link processing, footswitch, 4 machine shoes, unidor tool monitoring un 6, light barrier WEIGHT APPROX.: 1500 KG
DIMENSIONS (L X W X H) APPROX.: 1800 X 1200 X 2000 MM
DESCRIPTION: INVENTORY NUMBER 111034, PRESS FORCE 20 T, LIFTING SPEED 125/MIN, RAM STROKE 8 TO 80 MM, UPPER PART OF THE MACHINE IS SWIVELLING, COLUMN OUTREACH APPROX. 200 MM, WITH BELT UNWINDER, SPECIAL TOOLS FOR CHAIN LINK PROCESSING, FOOTSWITCH, 4 MACHINE SHOES, UNIDOR TOOL MONITORING UN 6, LIGHT BARRIER
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-nominal pressing force: 5660kn, ram force: 3150kn, ram retraction force: 300kn, ram stroke: 900mm, ram surface: 1500x1000mm, open width between columns: 1510mm, rapid traverse: 300mm/s, length: 8400mm, width: 3200mm, weight: 39.7t.  NOMINAL PRESSING FORCE: 5660KN, RAM FORCE: 3150KN, RAM RETRACTION FORCE: 300KN, RAM STROKE: 900MM, RAM SURFACE: 1500X1000MM, OPEN WIDTH BETWEEN COLUMNS: 1510MM, RAPID TRAVERSE: 300MM/S, LENGTH: 8400MM, WIDTH: 3200MM, WEIGHT: 39.7T.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 400 €
Ubicación: Land-weight approx.: 1500 kg<br/>dimensions (l x w x h) approx.: 1800 x 1200 x 2000 mm<br/>description: inventory number 171045, pressing force 20 t, hoist speed 125/min, ram stroke 8 to 80 mm, upper part of the machine is swivelling, column outreach approx. 200 mm, with belt unwinder, special tool for chain link processing, footswitch, 4 machine shoes, unidor tool monitoring un 6, light barriers WEIGHT APPROX.: 1500 KG
DIMENSIONS (L X W X H) APPROX.: 1800 X 1200 X 2000 MM
DESCRIPTION: INVENTORY NUMBER 171045, PRESSING FORCE 20 T, HOIST SPEED 125/MIN, RAM STROKE 8 TO 80 MM, UPPER PART OF THE MACHINE IS SWIVELLING, COLUMN OUTREACH APPROX. 200 MM, WITH BELT UNWINDER, SPECIAL TOOL FOR CHAIN LINK PROCESSING, FOOTSWITCH, 4 MACHINE SHOES, UNIDOR TOOL MONITORING UN 6, LIGHT BARRIERS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-make: schuler
model: hydraulic press schuler hydrap 500
condition: used
machine type: other 
location of machine: poland 
documentation / manuals included? yes 
is tooling / spares included? yes

machine details
hydraulic press schuler hydrap 500

manufacturer: schuler

condition: very good, dismantled

technical details:

capacity:                                              500 t

bed size dimension:                              1500 x 1400mm

cutting shock damping:                         5000kn

function spring tool:                             200kn

quills bore in table:                               49 pcs

distance quills bores in x and y:            x – 150mm, y – 150mm MAKE: SCHULER MODEL: HYDRAULIC PRESS SCHULER HYDRAP 500 CONDITION: USED MACHINE TYPE: OTHER LOCATION OF MACHINE: POLAND DOCUMENTATION / MANUALS INCLUDED? YES IS TOOLING / SPARES INCLUDED? YES MACHINE DETAILS HYDRAULIC PRESS SCHULER HYDRAP 500 MANUFACTURER: SCHULER CONDITION: VERY GOOD, DISMANTLED TECHNICAL DETAILS: CAPACITY: 500 T BED SIZE DIMENSION: 1500 X 1400MM CUTTING SHOCK DAMPING: 5000KN FUNCTION SPRING TOOL: 200KN QUILLS BORE IN TABLE: 49 PCS DISTANCE QUILLS BORES IN X AND Y: X – 150MM, Y – 150MM
Vendedor: CNC Management Ltd
Año de construcción: usado
Ubicación: Land-press design:  <br/>- drive system: eccentric / crank:        <br/>press forces:  <br/>- total force (nominal):    125 to<br/>press table:  <br/>- table surface (left-right):   1000 mm<br/>- table surface (front-back):    800 mm<br/>slide:  <br/>- table surface (left-right):    880 mm<br/>- table surface (front-back):    710 mm<br/>slide (mechan. press):  <br/>- slide adjustment:    100 mm<br/>- stroke min.:     20 mm<br/>- stroke max.:    125 mm<br/>- stroke rate (min.):     40 /min<br/>- stroke rate (max.):    140 /min<br/>tool assembly dimensions:  <br/>- shut height (stroke down, adjustment up), bdc:    450 mm<br/>overall specifications (coil lines):  <br/>- sheet width max:    400 mm<br/>- sheet thickness max:      2 mm<br/>leveller unit:  <br/>- number of leveller rolls:      7  <br/>this machine has a coil feed line lara emae 400<br/>decoiler lara emae-61/300  nº 303-00-00658<br/>feeder/straightener lara emae-61/300 nº 303 00 00 660<br/>(300 mm x 2 mm)<br/><br/>press can be inspect under power:<br/>https://youtu.be/le3pylankba<br/>https://youtu.be/jk5bmdgaawg<br/><br/><br/><br/><br/> PRESS DESIGN:
- DRIVE SYSTEM: ECCENTRIC / CRANK:
PRESS FORCES:
- TOTAL FORCE (NOMINAL): 125 TO
PRESS TABLE:
- TABLE SURFACE (LEFT-RIGHT): 1000 MM
- TABLE SURFACE (FRONT-BACK): 800 MM
SLIDE:
- TABLE SURFACE (LEFT-RIGHT): 880 MM
- TABLE SURFACE (FRONT-BACK): 710 MM
SLIDE (MECHAN. PRESS):
- SLIDE ADJUSTMENT: 100 MM
- STROKE MIN.: 20 MM
- STROKE MAX.: 125 MM
- STROKE RATE (MIN.): 40 /MIN
- STROKE RATE (MAX.): 140 /MIN
TOOL ASSEMBLY DIMENSIONS:
- SHUT HEIGHT (STROKE DOWN, ADJUSTMENT UP), BDC: 450 MM
OVERALL SPECIFICATIONS (COIL LINES):
- SHEET WIDTH MAX: 400 MM
- SHEET THICKNESS MAX: 2 MM
LEVELLER UNIT:
- NUMBER OF LEVELLER ROLLS: 7
THIS MACHINE HAS A COIL FEED LINE LARA EMAE 400
DECOILER LARA EMAE-61/300 Nº 303-00-00658
FEEDER/STRAIGHTENER LARA EMAE-61/300 Nº 303 00 00 660
(300 MM X 2 MM)

PRESS CAN BE INSPECT UNDER POWER:
HTTPS://YOUTU.BE/LE3PYLANKBA
HTTPS://YOUTU.BE/JK5BMDGAAWG




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-force of pressure: 63 t projection: 250 mm table size: 500 x 710 mm durchfalloch in the table: 250/280 mm surface of the plunger: 280 x 450 mm slide adjustment: 63 mm stroke adjustment: 8-100 mm stroke rate: 140 / min drive motor: 380 v, 5 kw space: 1650 x 1300 x 2600 mm weight : approx. 3500 kg 
 FORCE OF PRESSURE: 63 T PROJECTION: 250 MM TABLE SIZE: 500 X 710 MM DURCHFALLOCH IN THE TABLE: 250/280 MM SURFACE OF THE PLUNGER: 280 X 450 MM SLIDE ADJUSTMENT: 63 MM STROKE ADJUSTMENT: 8-100 MM STROKE RATE: 140 / MIN DRIVE MOTOR: 380 V, 5 KW SPACE: 1650 X 1300 X 2600 MM WEIGHT : APPROX. 3500 KG
Vendedor: Kurt Steiger Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-pressure:     25 t<br/>throat:        mm<br/>stroke:        mm<br/>--------------------------------------------------:  <br/>press forces:  <br/>- total force (nominal):     25 to<br/>press table:  <br/>- table surface (left-right):    465 mm<br/>- table surface (front-back):    160 mm<br/>slide:  <br/>- slide force:     25 to<br/>- table surface (left-right):    220 mm<br/>- table surface (front-back):    160 mm<br/>- stroke rate (max.):    150 /min<br/>slide (mechan. press):  <br/>- stroke adjustment: yes:        <br/>- stroke min.:      5 mm<br/>- stroke max.:     75 mm<br/>tool assembly dimensions:  <br/>- shut height (stroke down, adjustment up), bdc:    270 mm<br/>electrical specifications:  <br/>- mains voltage:    400 v<br/>- mains frequency:     50 hz<br/>dimensions / weights:  <br/>- space requirements -left/right-:   1200 mm<br/>- space requirements -front/back-:   1200 mm<br/>- total height:   2200 mm<br/>- total weight approx.:   2000 kg<br/><br/><br/><br/><br/> PRESSURE: 25 T
THROAT: MM
STROKE: MM
--------------------------------------------------:
PRESS FORCES:
- TOTAL FORCE (NOMINAL): 25 TO
PRESS TABLE:
- TABLE SURFACE (LEFT-RIGHT): 465 MM
- TABLE SURFACE (FRONT-BACK): 160 MM
SLIDE:
- SLIDE FORCE: 25 TO
- TABLE SURFACE (LEFT-RIGHT): 220 MM
- TABLE SURFACE (FRONT-BACK): 160 MM
- STROKE RATE (MAX.): 150 /MIN
SLIDE (MECHAN. PRESS):
- STROKE ADJUSTMENT: YES:
- STROKE MIN.: 5 MM
- STROKE MAX.: 75 MM
TOOL ASSEMBLY DIMENSIONS:
- SHUT HEIGHT (STROKE DOWN, ADJUSTMENT UP), BDC: 270 MM
ELECTRICAL SPECIFICATIONS:
- MAINS VOLTAGE: 400 V
- MAINS FREQUENCY: 50 HZ
DIMENSIONS / WEIGHTS:
- SPACE REQUIREMENTS -LEFT/RIGHT-: 1200 MM
- SPACE REQUIREMENTS -FRONT/BACK-: 1200 MM
- TOTAL HEIGHT: 2200 MM
- TOTAL WEIGHT APPROX.: 2000 KG




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-pressing force: 40t, swing ausladung: 220mm, stroke: 8-88mm, stroke speed: 60-160/min, connected load: 4kw, length: 1500mm, width: 1450mm, height: 2300mm, weight: 2.3t.  PRESSING FORCE: 40T, SWING AUSLADUNG: 220MM, STROKE: 8-88MM, STROKE SPEED: 60-160/MIN, CONNECTED LOAD: 4KW, LENGTH: 1500MM, WIDTH: 1450MM, HEIGHT: 2300MM, WEIGHT: 2.3T.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-press design:  <br/>- drive system: eccentric / crank:        <br/>press forces:  <br/>- total force (nominal):     63 to<br/>press table:  <br/>- table surface (left-right):    710 mm<br/>- table surface (front-back):    500 mm<br/>- thickness of bolster plate:     85 mm<br/>slide:  <br/>- table surface (left-right):    450 mm<br/>- table surface (front-back):    280 mm<br/>slide (mechan. press):  <br/>- slide adjustment:     63 mm<br/>- stroke min.:     30 mm<br/>- stroke max.:    140 mm<br/>- variable speed: yes:        <br/>- stroke rate (max.):    125 /min<br/>tool assembly dimensions:  <br/>- shut height (stroke down, adjustment up), bdc:    275 mm<br/>electrical specifications:  <br/>- total power consumption:      5 kw<br/>dimensions / weights:  <br/>- total weight approx.:   3500 kg<br/>attachments (presses):  <br/>- foot engagement: yes:        <br/>video demo:<br/>https://youtu.be/k9ccv5mynki<br/><br/><br/><br/><br/> PRESS DESIGN:
- DRIVE SYSTEM: ECCENTRIC / CRANK:
PRESS FORCES:
- TOTAL FORCE (NOMINAL): 63 TO
PRESS TABLE:
- TABLE SURFACE (LEFT-RIGHT): 710 MM
- TABLE SURFACE (FRONT-BACK): 500 MM
- THICKNESS OF BOLSTER PLATE: 85 MM
SLIDE:
- TABLE SURFACE (LEFT-RIGHT): 450 MM
- TABLE SURFACE (FRONT-BACK): 280 MM
SLIDE (MECHAN. PRESS):
- SLIDE ADJUSTMENT: 63 MM
- STROKE MIN.: 30 MM
- STROKE MAX.: 140 MM
- VARIABLE SPEED: YES:
- STROKE RATE (MAX.): 125 /MIN
TOOL ASSEMBLY DIMENSIONS:
- SHUT HEIGHT (STROKE DOWN, ADJUSTMENT UP), BDC: 275 MM
ELECTRICAL SPECIFICATIONS:
- TOTAL POWER CONSUMPTION: 5 KW
DIMENSIONS / WEIGHTS:
- TOTAL WEIGHT APPROX.: 3500 KG
ATTACHMENTS (PRESSES):
- FOOT ENGAGEMENT: YES:
VIDEO DEMO:
HTTPS://YOUTU.BE/K9CCV5MYNKI




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-mechanical press schuler es2 400 t 

manufacturer: schuler 
model: es2 400 t
year of manufacture: 1978
condition: working.
press capacity 400 t
slide stroke 						610 mm
slide adjustment 					305 mm
die height 						1018 mm
bolster size 						2743 x 1524 mm
number of strokes 					20 spm
required power 					82 kw
table height over floor 				400 mm
die cushion capacity 					70 t
die cushion stroke 					203 m
weight app. 						120 t

stroke dia at four pressure points: 			400 x 190 mm
stroke dia for pressure transformer:
for pneumatic: 					200 mm
for hydraulic: 						30 mm
 
extending table:
pulling device in the table:
puller quantity: 2 pieces
pneumatic cushion quantity: 2 pieces
pressure plate surface on cushions: 		1170 x 977 mm
impact diameter: 					1000 mm
push stroke: 						203 mm
total force at pressure above 6 atm. : 		70 mp



 MECHANICAL PRESS SCHULER ES2 400 T MANUFACTURER: SCHULER MODEL: ES2 400 T YEAR OF MANUFACTURE: 1978 CONDITION: WORKING. PRESS CAPACITY 400 T SLIDE STROKE 610 MM SLIDE ADJUSTMENT 305 MM DIE HEIGHT 1018 MM BOLSTER SIZE 2743 X 1524 MM NUMBER OF STROKES 20 SPM REQUIRED POWER 82 KW TABLE HEIGHT OVER FLOOR 400 MM DIE CUSHION CAPACITY 70 T DIE CUSHION STROKE 203 M WEIGHT APP. 120 T STROKE DIA AT FOUR PRESSURE POINTS: 400 X 190 MM STROKE DIA FOR PRESSURE TRANSFORMER: FOR PNEUMATIC: 200 MM FOR HYDRAULIC: 30 MM EXTENDING TABLE: PULLING DEVICE IN THE TABLE: PULLER QUANTITY: 2 PIECES PNEUMATIC CUSHION QUANTITY: 2 PIECES PRESSURE PLATE SURFACE ON CUSHIONS: 1170 X 977 MM IMPACT DIAMETER: 1000 MM PUSH STROKE: 203 MM TOTAL FORCE AT PRESSURE ABOVE 6 ATM. : 70 MP
Vendedor: GORBREX Machinery Trade Sp.z o.o.
Año de construcción: usado
Precio: 50 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-total press weight: 162500 kg
nominal force: 1000 kn
maximum stroke length: 1350 mm
mounting height: 2500 mm
shutter speed: 144 mm / s
max. operating speed: 68 mm / s
operating speed at nominal force: 31 mm / s
max. tool base wxh: 4400 x 2300 mm
with a nominal force wxh: 1600x850 mm
min. tool height: 1150 mm
max. total tool weight: 60,000 kg
max. upper tool weight: 30,000 kg
permissible eccentric left-right hitch: 1500 knm
available eccentric front-to-back load: 800 knm
installed power: 110 kw
rated current: 275 
voltage: 400 v
frequency: 50 hz
operating hydraulic pressure: 280 bar
total oil volume: 1980 l    TOTAL PRESS WEIGHT: 162500 KG NOMINAL FORCE: 1000 KN MAXIMUM STROKE LENGTH: 1350 MM MOUNTING HEIGHT: 2500 MM SHUTTER SPEED: 144 MM / S MAX. OPERATING SPEED: 68 MM / S OPERATING SPEED AT NOMINAL FORCE: 31 MM / S MAX. TOOL BASE WXH: 4400 X 2300 MM WITH A NOMINAL FORCE WXH: 1600X850 MM MIN. TOOL HEIGHT: 1150 MM MAX. TOTAL TOOL WEIGHT: 60,000 KG MAX. UPPER TOOL WEIGHT: 30,000 KG PERMISSIBLE ECCENTRIC LEFT-RIGHT HITCH: 1500 KNM AVAILABLE ECCENTRIC FRONT-TO-BACK LOAD: 800 KNM INSTALLED POWER: 110 KW RATED CURRENT: 275 VOLTAGE: 400 V FREQUENCY: 50 HZ OPERATING HYDRAULIC PRESSURE: 280 BAR TOTAL OIL VOLUME: 1980 L
Vendedor: BASTA machinery
Año de construcción: usado
Precio: 60 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-hydraulic press schuler hydrap 315 

manufacturer:	schuler
model:	hpdzb 3150-3000/1300
new in:	2001
condition:	very  good

technical details

press capacity: 	315 t
table dimensions:	3 000 x 1 300 mm
min. die stamping dimensions:	2 000 x 866 mm
slide stroke:	800 mm
max. shut height:	1 300 mm
number of strokes per min (regulated):	13-46 
cusion capacity:	160 t
cusion stroke:	200 mm  HYDRAULIC PRESS SCHULER HYDRAP 315 MANUFACTURER: SCHULER MODEL: HPDZB 3150-3000/1300 NEW IN: 2001 CONDITION: VERY GOOD TECHNICAL DETAILS PRESS CAPACITY: 315 T TABLE DIMENSIONS: 3 000 X 1 300 MM MIN. DIE STAMPING DIMENSIONS: 2 000 X 866 MM SLIDE STROKE: 800 MM MAX. SHUT HEIGHT: 1 300 MM NUMBER OF STROKES PER MIN (REGULATED): 13-46 CUSION CAPACITY: 160 T CUSION STROKE: 200 MM
Vendedor: GORBREX Machinery Trade Sp.z o.o.
Año de construcción: usado
Precio: 190 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-technical details<br/>  pressure 080 t<br/>  table size 710 x 500 mm<br/>  hub 8-100 mm<br/>  projection 280 mm<br/>  stroke rate 65 stroke/min<br/>  gr. table - ram distance 300 mm<br/>  diarrhea opening in the table 200 mm<br/>  plunger area 430 x 280 mm<br/>  tappet bores x 50 x 80 mm deep<br/>  tappet adjustment 63 mm<br/>  total power 8 kw<br/>  machine weight approx.  4 t<br/>  dimensions (length/width/height) 1.6 x 1.5 x 2.6 m<br/>  <br/>  additional information<br/>  machine was audited annually by schuler service and is free until 9/2011. TECHNICAL DETAILS
PRESSURE 080 T
TABLE SIZE 710 X 500 MM
HUB 8-100 MM
PROJECTION 280 MM
STROKE RATE 65 STROKE/MIN
GR. TABLE - RAM DISTANCE 300 MM
DIARRHEA OPENING IN THE TABLE 200 MM
PLUNGER AREA 430 X 280 MM
TAPPET BORES X 50 X 80 MM DEEP
TAPPET ADJUSTMENT 63 MM
TOTAL POWER 8 KW
MACHINE WEIGHT APPROX. 4 T
DIMENSIONS (LENGTH/WIDTH/HEIGHT) 1.6 X 1.5 X 2.6 M

ADDITIONAL INFORMATION
MACHINE WAS AUDITED ANNUALLY BY SCHULER SERVICE AND IS FREE UNTIL 9/2011.
Vendedor: ATMH Werkzeugmaschinen-Handel GmbH
Año de construcción: usado
Precio: 450 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-force: 320 tons<br/>  windows: 200mm<br/>  daylight: 400mm<br/>  table: 530x530mm<br/>  ram: 400x400mm<br/>  95: 95mm<br/>  strokes per minute: 33-45-68<br/>  weight: 12 tons<br/>  height: 3400mm FORCE: 320 TONS
WINDOWS: 200MM
DAYLIGHT: 400MM
TABLE: 530X530MM
RAM: 400X400MM
95: 95MM
STROKES PER MINUTE: 33-45-68
WEIGHT: 12 TONS
HEIGHT: 3400MM
Vendedor: Köke Pressen
Año de construcción: usado
Ubicación: Land-pressure total: 1.500 ton ram stroke: 800 mm ram adjustment: 600 mm shut height (stroke down, adjustment up): 1.270 mm free frontal opening l-r: 5.060 mm table surface area : 5.000 x 2.700 mm ram surface area: 5.000 x 2.700 mm number of strokes: 6 - 12 s.p.m. height over floor approx.: 9.860 mm weight of machine approx.: 540 ton PRESSURE TOTAL: 1.500 TON RAM STROKE: 800 MM RAM ADJUSTMENT: 600 MM SHUT HEIGHT (STROKE DOWN, ADJUSTMENT UP): 1.270 MM FREE FRONTAL OPENING L-R: 5.060 MM TABLE SURFACE AREA : 5.000 X 2.700 MM RAM SURFACE AREA: 5.000 X 2.700 MM NUMBER OF STROKES: 6 - 12 S.P.M. HEIGHT OVER FLOOR APPROX.: 9.860 MM WEIGHT OF MACHINE APPROX.: 540 TON
Vendedor: Pressen HAAS GmbH
Año de construcción: usado
Ubicación: Land-pressing force: 800kn, clamping table dimensions: 900x670mm, stroke: 25mm, ram adjustment: 60mm, stroke speed: 100-500/min, including double coiler with straightener schuler a2hr 180-2: outer roll diameter: 1200mm, band width: 180mm max., clamping range on inner roll diameter: 360-510mm, uncoil speed: 0.1-60m/min, sheet thickness: 0.5-2mm, coil weight: 1.4t max.  PRESSING FORCE: 800KN, CLAMPING TABLE DIMENSIONS: 900X670MM, STROKE: 25MM, RAM ADJUSTMENT: 60MM, STROKE SPEED: 100-500/MIN, INCLUDING DOUBLE COILER WITH STRAIGHTENER SCHULER A2HR 180-2: OUTER ROLL DIAMETER: 1200MM, BAND WIDTH: 180MM MAX., CLAMPING RANGE ON INNER ROLL DIAMETER: 360-510MM, UNCOIL SPEED: 0.1-60M/MIN, SHEET THICKNESS: 0.5-2MM, COIL WEIGHT: 1.4T MAX.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-pressure: 125 t<br/>throat: 315 mm<br/>stroke: 20 - 160 mm<br/>table-size: 800 x 600 mm<br/>dimension of ram: 560 x 400 mm<br/>ram adjustment: 100 mm<br/>shut height (stroke down, adjustm. up): 370 mm<br/>number of strokes - idle run: 45 /min<br/>total power requirement: 17 kw<br/>weight of the machine ca.: 9 t<br/>dimensions of the machine ca.: 2,2 x 1,8 x 3,2 m<br/>machine has air clutch and brake. it has a second brake.<br/><br/><br/><br/><br/> PRESSURE: 125 T
THROAT: 315 MM
STROKE: 20 - 160 MM
TABLE-SIZE: 800 X 600 MM
DIMENSION OF RAM: 560 X 400 MM
RAM ADJUSTMENT: 100 MM
SHUT HEIGHT (STROKE DOWN, ADJUSTM. UP): 370 MM
NUMBER OF STROKES - IDLE RUN: 45 /MIN
TOTAL POWER REQUIREMENT: 17 KW
WEIGHT OF THE MACHINE CA.: 9 T
DIMENSIONS OF THE MACHINE CA.: 2,2 X 1,8 X 3,2 M
MACHINE HAS AIR CLUTCH AND BRAKE. IT HAS A SECOND BRAKE.




Vendedor: Wirths GmbH, Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-pressure 63 t<br/> stroke 9-99 mm<br/> total power requirement 7 kw PRESSURE 63 T
STROKE 9-99 MM
TOTAL POWER REQUIREMENT 7 KW
Vendedor: G. Folmer Industriebedarf
Año de construcción: usado
Ubicación: Land-pressure:    250 t<br/>throat:    400 mm<br/>stroke:    140 mm<br/>--------------------------------------------------:  <br/>press forces:  <br/>- total force (nominal):    250 to<br/>press table:  <br/>- table surface (left-right):   1150 mm<br/>- table surface (front-back):    850 mm<br/>slide:  <br/>- stroke:    140 mm<br/>- stroke rate (max.):     42 /min<br/>slide (mechan. press):  <br/>- stroke adjustment: yes:        <br/>- stroke min.:     30 mm<br/>- stroke max.:    140 mm<br/>- variable speed: no:        <br/>tool assembly dimensions:  <br/>- shut height (stroke down, adjustment up), bdc:    650 mm<br/>- throat (c-frame):    400 mm<br/>electrical specifications:  <br/>- total power consumption:   17.5 kw<br/>- mains voltage:    380 v<br/>dimensions / weights:  <br/>- total height:   1800 mm<br/>- height above floor level:   2800 mm<br/>- height under floor level:   3500 mm<br/>- total weight approx.:  16000 kg<br/>security lock, pneumatic compensator, pneumatic clutch-brake, automatic lubrication pump.<br/><br/><br/><br/><br/> PRESSURE: 250 T
THROAT: 400 MM
STROKE: 140 MM
--------------------------------------------------:
PRESS FORCES:
- TOTAL FORCE (NOMINAL): 250 TO
PRESS TABLE:
- TABLE SURFACE (LEFT-RIGHT): 1150 MM
- TABLE SURFACE (FRONT-BACK): 850 MM
SLIDE:
- STROKE: 140 MM
- STROKE RATE (MAX.): 42 /MIN
SLIDE (MECHAN. PRESS):
- STROKE ADJUSTMENT: YES:
- STROKE MIN.: 30 MM
- STROKE MAX.: 140 MM
- VARIABLE SPEED: NO:
TOOL ASSEMBLY DIMENSIONS:
- SHUT HEIGHT (STROKE DOWN, ADJUSTMENT UP), BDC: 650 MM
- THROAT (C-FRAME): 400 MM
ELECTRICAL SPECIFICATIONS:
- TOTAL POWER CONSUMPTION: 17.5 KW
- MAINS VOLTAGE: 380 V
DIMENSIONS / WEIGHTS:
- TOTAL HEIGHT: 1800 MM
- HEIGHT ABOVE FLOOR LEVEL: 2800 MM
- HEIGHT UNDER FLOOR LEVEL: 3500 MM
- TOTAL WEIGHT APPROX.: 16000 KG
SECURITY LOCK, PNEUMATIC COMPENSATOR, PNEUMATIC CLUTCH-BRAKE, AUTOMATIC LUBRICATION PUMP.




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-schuler a2- 80 double sided high speed power press
max pressure 80 tons
speed 100-500 spm
stroke 25 mm SCHULER A2- 80 DOUBLE SIDED HIGH SPEED POWER PRESS MAX PRESSURE 80 TONS SPEED 100-500 SPM STROKE 25 MM
Vendedor: MachTechnica Ltd.
Año de construcción: usado
Ubicación: Land-pressure: 080 t<br/>throat: 280 mm<br/>stroke: 8 - 100 mm<br/>table-size: 710 x 500 mm<br/>no. of strokes: 65 hub/min<br/>max. distance table - ram: 300 mm<br/>hole in the table: 200 mm<br/>ram surface: 430 x 280 mm<br/>ram drills x depth: 50 x 80 mm<br/>ram adjustment: 63 mm<br/>total power requirement: 8 kw<br/>weight of the machine ca.: 4 t<br/>dimensions (l/w/h): 1,6 x 1,5 x 2,6 m<br/>machine was checked each year by schuler service.<br/><br/><br/><br/><br/> PRESSURE: 080 T
THROAT: 280 MM
STROKE: 8 - 100 MM
TABLE-SIZE: 710 X 500 MM
NO. OF STROKES: 65 HUB/MIN
MAX. DISTANCE TABLE - RAM: 300 MM
HOLE IN THE TABLE: 200 MM
RAM SURFACE: 430 X 280 MM
RAM DRILLS X DEPTH: 50 X 80 MM
RAM ADJUSTMENT: 63 MM
TOTAL POWER REQUIREMENT: 8 KW
WEIGHT OF THE MACHINE CA.: 4 T
DIMENSIONS (L/W/H): 1,6 X 1,5 X 2,6 M
MACHINE WAS CHECKED EACH YEAR BY SCHULER SERVICE.




Vendedor: Wirths GmbH, Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-used electric three bending machine rollers with clutch

cylinder length approx. 1, 04 m

roll diameter: 75 mm

we can specify shipping costs upon request stating your postal code!

the machine works fine.

the shipping is free from stock wins.

scope of delivery: machine in the photos shown delivered by freight forwarding upon request.

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!) USED ELECTRIC THREE BENDING MACHINE ROLLERS WITH CLUTCH CYLINDER LENGTH APPROX. 1, 04 M ROLL DIAMETER: 75 MM WE CAN SPECIFY SHIPPING COSTS UPON REQUEST STATING YOUR POSTAL CODE! THE MACHINE WORKS FINE. THE SHIPPING IS FREE FROM STOCK WINS. SCOPE OF DELIVERY: MACHINE IN THE PHOTOS SHOWN DELIVERED BY FREIGHT FORWARDING UPON REQUEST. CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-pressure: 63 t<br/>throat: 315 mm<br/>stroke: 8-100 mm<br/>no. of strokes: 140 hub/min<br/>ram - range of adjustment: 63 mm<br/>table surface area: 1200x630 mm<br/>ram surface: 800x315 mm<br/>hole in the table: Ø 110 mm<br/>table height: 820 mm<br/>tool hole in ram: Ø 50 mm<br/>dayligth: 335 mm<br/>total power requirement: 7,5 kw<br/>weight of the machine ca.: 5 t<br/><br/><br/><br/><br/> PRESSURE: 63 T
THROAT: 315 MM
STROKE: 8-100 MM
NO. OF STROKES: 140 HUB/MIN
RAM - RANGE OF ADJUSTMENT: 63 MM
TABLE SURFACE AREA: 1200X630 MM
RAM SURFACE: 800X315 MM
HOLE IN THE TABLE: Ø 110 MM
TABLE HEIGHT: 820 MM
TOOL HOLE IN RAM: Ø 50 MM
DAYLIGTH: 335 MM
TOTAL POWER REQUIREMENT: 7,5 KW
WEIGHT OF THE MACHINE CA.: 5 T




Vendedor: Maschinen Schwartpaul GmbH
Año de construcción: usado
Ubicación: Land-manufacturer:	schuler
model:	hpdzb 5000-3000/1300
new in:	2001
condition:	very  good
technical details
press capacity: 	500 t
table dimensions:	3 000 x 1 300 mm
min. die stamping dimensions:	2 000 x 866 mm
slide stroke:	800 mm
max. shut height:	1 300 mm
number of strokes per minute (regulated):	17-60 
cusion capacity:	315 t
cusion stroke:	200 mm   MANUFACTURER: SCHULER MODEL: HPDZB 5000-3000/1300 NEW IN: 2001 CONDITION: VERY GOOD TECHNICAL DETAILS PRESS CAPACITY: 500 T TABLE DIMENSIONS: 3 000 X 1 300 MM MIN. DIE STAMPING DIMENSIONS: 2 000 X 866 MM SLIDE STROKE: 800 MM MAX. SHUT HEIGHT: 1 300 MM NUMBER OF STROKES PER MINUTE (REGULATED): 17-60 CUSION CAPACITY: 315 T CUSION STROKE: 200 MM
Vendedor: GORBREX Machinery Trade Sp.z o.o.
Año de construcción: usado
Ubicación: Land-pressure: 40 t<br/>throat: 250 mm<br/>stroke: 180 mm<br/>table area: 600x450 mm<br/>ram surface: 450x250 mm<br/>strokes per minute: 20-45 <br/>dayligth: 30 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 2,5 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> PRESSURE: 40 T
THROAT: 250 MM
STROKE: 180 MM
TABLE AREA: 600X450 MM
RAM SURFACE: 450X250 MM
STROKES PER MINUTE: 20-45
DAYLIGTH: 30 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 2,5 T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Ubicación: Land-gebr. gap eccentric presses make schuler
	model ped r160/400. no.: 75125/5 built in 1960

pressure power 160 to
	piston stroke 30-200 mm
	30-80 strokes / min
	overtravel distance 90 mm
	run-on time 250 ms
	safety distance 400 mm
	external dimensions:
	width 1700 mm
		2400 mm deep
		height 3300 mm
	weight approx.		10500 kg
	control equipped with presses security system power 1978 gummersbach.

GEBR. GAP ECCENTRIC PRESSES MAKE SCHULER MODEL PED R160/400. NO.: 75125/5 BUILT IN 1960 PRESSURE POWER 160 TO PISTON STROKE 30-200 MM 30-80 STROKES / MIN OVERTRAVEL DISTANCE 90 MM RUN-ON TIME 250 MS SAFETY DISTANCE 400 MM EXTERNAL DIMENSIONS: WIDTH 1700 MM 2400 MM DEEP HEIGHT 3300 MM WEIGHT APPROX. 10500 KG CONTROL EQUIPPED WITH PRESSES SECURITY SYSTEM POWER 1978 GUMMERSBACH.
Vendedor: RUDOLF BANDMANN WERKZEUGMASCHINEN e.K.
Año de construcción: usado
Ubicación: Land-sheet width: 5 mm<br/>plate thickness: 1000 mm<br/>distance between columns:  mm<br/>total power requirement: 4 kw<br/>weight of the machine ca.: 2,8 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> SHEET WIDTH: 5 MM
PLATE THICKNESS: 1000 MM
DISTANCE BETWEEN COLUMNS: MM
TOTAL POWER REQUIREMENT: 4 KW
WEIGHT OF THE MACHINE CA.: 2,8 T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-pressing force: 250 t	
engine power: 60 kw	
machine dimensions: 6225 x 3100 x 8425 mm	
machine weight : 132 t  PRESSING FORCE: 250 T ENGINE POWER: 60 KW MACHINE DIMENSIONS: 6225 X 3100 X 8425 MM MACHINE WEIGHT : 132 T
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-pressure: 250 t<br/>throat: 500 mm<br/>stroke: 30 - 220 mm<br/>no.of strokes: 40 /min.<br/>distance table/ram: 645 mm<br/>table surface area: 1140 x 980 mm<br/>table height over floor: 800 mm<br/>hole in the table: 450 / 500 mm<br/>passage to the back: 450 mm<br/>ram surface: 800 x 500 mm<br/>ram adjustment: 125 mm<br/>total power requirement: 18,50 kw<br/>weight of the machine ca.: 15,00 t<br/>dimensions of the machine ca.: b 1,70 x t 2,60 x h 3,50 m<br/><br/><br/><br/><br/> PRESSURE: 250 T
THROAT: 500 MM
STROKE: 30 - 220 MM
NO.OF STROKES: 40 /MIN.
DISTANCE TABLE/RAM: 645 MM
TABLE SURFACE AREA: 1140 X 980 MM
TABLE HEIGHT OVER FLOOR: 800 MM
HOLE IN THE TABLE: 450 / 500 MM
PASSAGE TO THE BACK: 450 MM
RAM SURFACE: 800 X 500 MM
RAM ADJUSTMENT: 125 MM
TOTAL POWER REQUIREMENT: 18,50 KW
WEIGHT OF THE MACHINE CA.: 15,00 T
DIMENSIONS OF THE MACHINE CA.: B 1,70 X T 2,60 X H 3,50 M




Vendedor: Frech GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)