52 ofertas

Año de construcción: usado
Ubicación: Land-
manufacturer: mazak type: quick turn 28n
year of construction: 1994 control: mazatrol t plus
swing above bed: 510 mm
swing ã¼.planschlitten: 510 mm plan travel: 310 mm
longitudinal travel: 1010 mm
chuck diameter: schunk rota nck 250 three-jaw chuck
spindle bore: 80 mm
power: ca. 22 kw speed range from - to: 30-3000 rpm
dimensions approx.: 3235 x 1762 x 1850 lxwxh weight approx.: 5.300 kg equipment
axles: 2 tool carrier: 12 hollow clamping device: yes tailstock: yes
quill stroke automatic: yes
chip conveyor: yes

tool measurement

subject to error and sale.			
			
 MANUFACTURER: MAZAK TYPE: QUICK TURN 28N YEAR OF CONSTRUCTION: 1994 CONTROL: MAZATROL T PLUS SWING ABOVE BED: 510 MM SWING ü.PLANSCHLITTEN: 510 MM PLAN TRAVEL: 310 MM LONGITUDINAL TRAVEL: 1010 MM CHUCK DIAMETER: SCHUNK ROTA NCK 250 THREE-JAW CHUCK SPINDLE BORE: 80 MM POWER: CA. 22 KW SPEED RANGE FROM - TO: 30-3000 RPM DIMENSIONS APPROX.: 3235 X 1762 X 1850 LXWXH WEIGHT APPROX.: 5.300 KG EQUIPMENT AXLES: 2 TOOL CARRIER: 12 HOLLOW CLAMPING DEVICE: YES TAILSTOCK: YES QUILL STROKE AUTOMATIC: YES CHIP CONVEYOR: YES TOOL MEASUREMENT SUBJECT TO ERROR AND SALE.
Vendedor: Spantech GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 45 €
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 600 x 300 x 100 mm<br/>description: 2 pcs., 1 x schunk rota-s WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 300 X 100 MM
DESCRIPTION: 2 PCS., 1 X SCHUNK ROTA-S
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 905001
number: 1 pcs.
manufacturer: gildemeister
type: ctv 250
control: siemens 840 d slimline
year of constr.: 2017
state of preservation: second-hand machine
machine a (hours): 7,600
spindle a (hours): 4,900

description

turning

axes x/y/z/c
maximum turning length 200 mm
maximum swing over bed cover 350 mm
maximum chuck diameter 250 mm
max speed main spindle 5000 1/min
maximum performance main spindle in ed 10-40 / 100% 25 kw
maximum torque of main spindle in ed 10-40 / 100% 280 nm
main spindle spindle passage 57 mm
spindle diameter in front bearing spindle 120 mm
spindle flange size main spindle 170 h 5
axes on the main spindle unit x/z/c
travel in x/y/z main spindle unit 700 /-/ 300 mm
maximum rapid traverse in x/y/z main spindle unit 60 /-/ 40 m / min
full cylinder on the main spindle
coolant through the spindle

gun down
number of stations of which powered 12/12
tool holder in the vdi 40 turret
axes in the turret y
travel in x/y/z - 90 / - mm
tool mounting plate for additional block tool holder

more facilities

workpiece measuring probes (preparation)
splash panel with fully encapsulated workspace
lighting in the work area
hinged belt chip conveyor
coolant gun
reversible double cartridge filter
high pressure pump 12 bar
rotating part memory band
machine status light

accessories

pcs. 3 - jaw chuck schunk ncd 215-66 mm

general technical data

floor space of throughout the facility lxwxh) approx. 2800 x 2770 x 2650 mm
machine weight 6200 kg

comment

left model!
we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 905001 NUMBER: 1 PCS. MANUFACTURER: GILDEMEISTER TYPE: CTV 250 CONTROL: SIEMENS 840 D SLIMLINE YEAR OF CONSTR.: 2017 STATE OF PRESERVATION: SECOND-HAND MACHINE MACHINE A (HOURS): 7,600 SPINDLE A (HOURS): 4,900 DESCRIPTION TURNING AXES X/Y/Z/C MAXIMUM TURNING LENGTH 200 MM MAXIMUM SWING OVER BED COVER 350 MM MAXIMUM CHUCK DIAMETER 250 MM MAX SPEED MAIN SPINDLE 5000 1/MIN MAXIMUM PERFORMANCE MAIN SPINDLE IN ED 10-40 / 100% 25 KW MAXIMUM TORQUE OF MAIN SPINDLE IN ED 10-40 / 100% 280 NM MAIN SPINDLE SPINDLE PASSAGE 57 MM SPINDLE DIAMETER IN FRONT BEARING SPINDLE 120 MM SPINDLE FLANGE SIZE MAIN SPINDLE 170 H 5 AXES ON THE MAIN SPINDLE UNIT X/Z/C TRAVEL IN X/Y/Z MAIN SPINDLE UNIT 700 /-/ 300 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z MAIN SPINDLE UNIT 60 /-/ 40 M / MIN FULL CYLINDER ON THE MAIN SPINDLE COOLANT THROUGH THE SPINDLE GUN DOWN NUMBER OF STATIONS OF WHICH POWERED 12/12 TOOL HOLDER IN THE VDI 40 TURRET AXES IN THE TURRET Y TRAVEL IN X/Y/Z - 90 / - MM TOOL MOUNTING PLATE FOR ADDITIONAL BLOCK TOOL HOLDER MORE FACILITIES WORKPIECE MEASURING PROBES (PREPARATION) SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA HINGED BELT CHIP CONVEYOR COOLANT GUN REVERSIBLE DOUBLE CARTRIDGE FILTER HIGH PRESSURE PUMP 12 BAR ROTATING PART MEMORY BAND MACHINE STATUS LIGHT ACCESSORIES PCS. 3 - JAW CHUCK SCHUNK NCD 215-66 MM GENERAL TECHNICAL DATA FLOOR SPACE OF THROUGHOUT THE FACILITY LXWXH) APPROX. 2800 X 2770 X 2650 MM MACHINE WEIGHT 6200 KG COMMENT LEFT MODEL! WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 600 mm<br/>turning length: 1200 mm<br/>turning diameter over slide: 410 mm<br/>control: fanuc 210 is <br/>power capacity: 24/18 kw<br/>turning speeds: 3000 u/min<br/>rapid traverse: 15 m/min<br/>number of tapers in turret head: 8 <br/>spindle bore: 75 mm<br/>range l-w-h: 4,5 x 2,4 x 1,9 mm<br/>weight of the machine ca.: 5,5 t<br/>cnc lathe in good condition<br/><br/>- tailstock with mk 5<br/>- 3 jaw schuk schunk 315- 91<br/>- chipconveyor<br/><br/><br/><br/><br/> TURNING DIAMETER: 600 MM
TURNING LENGTH: 1200 MM
TURNING DIAMETER OVER SLIDE: 410 MM
CONTROL: FANUC 210 IS
POWER CAPACITY: 24/18 KW
TURNING SPEEDS: 3000 U/MIN
RAPID TRAVERSE: 15 M/MIN
NUMBER OF TAPERS IN TURRET HEAD: 8
SPINDLE BORE: 75 MM
RANGE L-W-H: 4,5 X 2,4 X 1,9 MM
WEIGHT OF THE MACHINE CA.: 5,5 T
CNC LATHE IN GOOD CONDITION

- TAILSTOCK WITH MK 5
- 3 JAW SCHUK SCHUNK 315- 91
- CHIPCONVEYOR




Vendedor: Klaus Rosenboom GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 905002
number: 1 pcs.
manufacturer: gildemeister
type: ctv 250
control: siemens 840 d slimline
year of constr.: 2017
state of preservation: second-hand machine
machine a (hours): 6,300
spindle a (hours): 4,400

description

turning

axes x/z/c
maximum turning length 200 mm
maximum swing over bed cover 350 mm
maximum chuck diameter 250 mm
max speed main spindle 5000 1/min
maximum performance main spindle in ed 10-40 / 100% 25 kw
maximum torque of main spindle in ed 10-40 / 100% 280 nm
main spindle spindle passage 57 mm
spindle diameter in front bearing spindle 120 mm
spindle flange size main spindle 170 h 5
axes on the main spindle unit x/z/c
travel in x/y/z main spindle unit 700 /-/ 300 mm
maximum rapid traverse in x/y/z main spindle unit 60 /-/ 40 m / min
full cylinder on the main spindle
coolant through the spindle
pneumatic work piece control

gun down
number of stations of which powered 12/12
tool holder in the vdi 40 turret
tool mounting plate for additional block tool holder

more facilities

splash panel with fully encapsulated workspace
lighting in the work area
hinged belt chip conveyor
coolant gun
reversible double cartridge filter
high pressure pump 12 bar
rotating part memory band
interface for automatic loading using bela de portal or robot
machine status light

accessories

pcs. 3 - jaw chuck schunk ncd 215-66 mm

general technical data

floor space of throughout the facility lxwxh) approx. 2800 x 2770 x 2650 mm
machine weight 6200 kg

comment

right model!
we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 905002 NUMBER: 1 PCS. MANUFACTURER: GILDEMEISTER TYPE: CTV 250 CONTROL: SIEMENS 840 D SLIMLINE YEAR OF CONSTR.: 2017 STATE OF PRESERVATION: SECOND-HAND MACHINE MACHINE A (HOURS): 6,300 SPINDLE A (HOURS): 4,400 DESCRIPTION TURNING AXES X/Z/C MAXIMUM TURNING LENGTH 200 MM MAXIMUM SWING OVER BED COVER 350 MM MAXIMUM CHUCK DIAMETER 250 MM MAX SPEED MAIN SPINDLE 5000 1/MIN MAXIMUM PERFORMANCE MAIN SPINDLE IN ED 10-40 / 100% 25 KW MAXIMUM TORQUE OF MAIN SPINDLE IN ED 10-40 / 100% 280 NM MAIN SPINDLE SPINDLE PASSAGE 57 MM SPINDLE DIAMETER IN FRONT BEARING SPINDLE 120 MM SPINDLE FLANGE SIZE MAIN SPINDLE 170 H 5 AXES ON THE MAIN SPINDLE UNIT X/Z/C TRAVEL IN X/Y/Z MAIN SPINDLE UNIT 700 /-/ 300 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z MAIN SPINDLE UNIT 60 /-/ 40 M / MIN FULL CYLINDER ON THE MAIN SPINDLE COOLANT THROUGH THE SPINDLE PNEUMATIC WORK PIECE CONTROL GUN DOWN NUMBER OF STATIONS OF WHICH POWERED 12/12 TOOL HOLDER IN THE VDI 40 TURRET TOOL MOUNTING PLATE FOR ADDITIONAL BLOCK TOOL HOLDER MORE FACILITIES SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA HINGED BELT CHIP CONVEYOR COOLANT GUN REVERSIBLE DOUBLE CARTRIDGE FILTER HIGH PRESSURE PUMP 12 BAR ROTATING PART MEMORY BAND INTERFACE FOR AUTOMATIC LOADING USING BELA DE PORTAL OR ROBOT MACHINE STATUS LIGHT ACCESSORIES PCS. 3 - JAW CHUCK SCHUNK NCD 215-66 MM GENERAL TECHNICAL DATA FLOOR SPACE OF THROUGHOUT THE FACILITY LXWXH) APPROX. 2800 X 2770 X 2650 MM MACHINE WEIGHT 6200 KG COMMENT RIGHT MODEL! WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 400 mm<br/>turning length: 650 mm<br/>turning diameter over bed slide: 270 <br/>control: siemens 840 d powerline <br/>spindle bore: 65 mm<br/>speeds: 4000 u/min<br/>number of tapers in turret head: 8 <br/>drive capacity - workpiece: 15/12 kw<br/>max. torque on the spindle: 400/320 <br/>range l-w-h: 2,2 x 1,6 x 1,9 mm<br/>weight of the machine ca.: 2,9 t<br/>used small cnc lathe with big spindle bore<br/><br/>- tailstock mk 4<br/>- dialog programming  siemens shop turn<br/>- some tool holders and jaws<br/>- ship box<br/>- 3 jaw chuck schunk rota tp 250-68<br/><br/><br/><br/><br/> TURNING DIAMETER: 400 MM
TURNING LENGTH: 650 MM
TURNING DIAMETER OVER BED SLIDE: 270
CONTROL: SIEMENS 840 D POWERLINE
SPINDLE BORE: 65 MM
SPEEDS: 4000 U/MIN
NUMBER OF TAPERS IN TURRET HEAD: 8
DRIVE CAPACITY - WORKPIECE: 15/12 KW
MAX. TORQUE ON THE SPINDLE: 400/320
RANGE L-W-H: 2,2 X 1,6 X 1,9 MM
WEIGHT OF THE MACHINE CA.: 2,9 T
USED SMALL CNC LATHE WITH BIG SPINDLE BORE

- TAILSTOCK MK 4
- DIALOG PROGRAMMING SIEMENS SHOP TURN
- SOME TOOL HOLDERS AND JAWS
- SHIP BOX
- 3 JAW CHUCK SCHUNK ROTA TP 250-68




Vendedor: Klaus Rosenboom GmbH
Año de construcción: usado
Ubicación: Land-nc cycle lathe, built 1998, contour knob, control system k, constant cutting speed.
umlaufdurchm. 550/500 mm
top width 1000 mm
material flow 70 mm
speed range approx. 2-3500 rpm.
quill stroke and cone 160 mm / mk 5
15/11 kw
weight approx. 3 t
accessories: guard travelling with, fixed bezel, chip conveyor, ready-steel holder with various inserts size 3, electric brakes, manual chuck schunk rota-s diameter. 200 mm. NC CYCLE LATHE, BUILT 1998, CONTOUR KNOB, CONTROL SYSTEM K, CONSTANT CUTTING SPEED. UMLAUFDURCHM. 550/500 MM TOP WIDTH 1000 MM MATERIAL FLOW 70 MM SPEED RANGE APPROX. 2-3500 RPM. QUILL STROKE AND CONE 160 MM / MK 5 15/11 KW WEIGHT APPROX. 3 T ACCESSORIES: GUARD TRAVELLING WITH, FIXED BEZEL, CHIP CONVEYOR, READY-STEEL HOLDER WITH VARIOUS INSERTS SIZE 3, ELECTRIC BRAKES, MANUAL CHUCK SCHUNK ROTA-S DIAMETER. 200 MM.
Vendedor: Schraag Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 600 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 1400 x 900 x 1000 mm<br/>description: 4 drawers with contents: various hand tools, drill bits, indexable inserts, lathe tools, collets, tools, schunk holders, jaw chuck accessories, tool holders, 6 of them the driven, various material, mobile WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 1400 X 900 X 1000 MM
DESCRIPTION: 4 DRAWERS WITH CONTENTS: VARIOUS HAND TOOLS, DRILL BITS, INDEXABLE INSERTS, LATHE TOOLS, COLLETS, TOOLS, SCHUNK HOLDERS, JAW CHUCK ACCESSORIES, TOOL HOLDERS, 6 OF THEM THE DRIVEN, VARIOUS MATERIAL, MOBILE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cnc lathe gildemeister ctx 400 series 2

with control siemens 810 d
year of construction: 2001 circulation o about bed rail: 570 mm
circulation o on plan management: 420 mm
plan travel: 220 mm
longitudinal travel: 635 mm
spindle bore: 79 mm
speed range: 25-5000 rpm with the following accessories:

sliding screen design with interior lighting
12 station vdi 30 turret
24 pcs. vdi 30 tool holders
3 jaw chuck schunk rota nc 0 250 mm (hydraulic) 3 set hard top jaws, 12 set of soft jaws
foot switch for chuck, foot switch for quill adjustment chip conveyor, transporter
oil mist extraction, revolving center point
tailstock with quill
coolant system
5 pcs. machine shoes
operating instructions CNC LATHE GILDEMEISTER CTX 400 SERIES 2 WITH CONTROL SIEMENS 810 D YEAR OF CONSTRUCTION: 2001 CIRCULATION O ABOUT BED RAIL: 570 MM CIRCULATION O ON PLAN MANAGEMENT: 420 MM PLAN TRAVEL: 220 MM LONGITUDINAL TRAVEL: 635 MM SPINDLE BORE: 79 MM SPEED RANGE: 25-5000 RPM WITH THE FOLLOWING ACCESSORIES: SLIDING SCREEN DESIGN WITH INTERIOR LIGHTING 12 STATION VDI 30 TURRET 24 PCS. VDI 30 TOOL HOLDERS 3 JAW CHUCK SCHUNK ROTA NC 0 250 MM (HYDRAULIC) 3 SET HARD TOP JAWS, 12 SET OF SOFT JAWS FOOT SWITCH FOR CHUCK, FOOT SWITCH FOR QUILL ADJUSTMENT CHIP CONVEYOR, TRANSPORTER OIL MIST EXTRACTION, REVOLVING CENTER POINT TAILSTOCK WITH QUILL COOLANT SYSTEM 5 PCS. MACHINE SHOES OPERATING INSTRUCTIONS
Vendedor: Martin Beschle Werkzeuge & Maschinen GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 130 €
Ubicación: Land-weight approx.: 270 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 330 mm<br/>description: - partly like new WEIGHT APPROX.: 270 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 330 MM
DESCRIPTION: - PARTLY LIKE NEW
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cnc universal lathe gildemeister nef 400

with control siemens sinumerik 840 d powerline
year of construction: 2008
o bed circulation: 400 mm
circulation o plan sliders: 270 mm
turning length: 650 mm
spindle bore: 65 mm
plan travel (x): 220 mm
plan travel (z): 700 mm
speed maximum 4000 u/min

with the following accessories:

sliding screen design with interior lighting
8 x turret vdi 30
24 pcs. vdi 30 tool holders
tailstock with quill
3 jaw chuck hydraulic 0 210 mm (schunk rota nck plus)
hydraulic chuck foot switch
chip conveyor
coolant system
chip tray
operating instructions CNC UNIVERSAL LATHE GILDEMEISTER NEF 400 WITH CONTROL SIEMENS SINUMERIK 840 D POWERLINE YEAR OF CONSTRUCTION: 2008 O BED CIRCULATION: 400 MM CIRCULATION O PLAN SLIDERS: 270 MM TURNING LENGTH: 650 MM SPINDLE BORE: 65 MM PLAN TRAVEL (X): 220 MM PLAN TRAVEL (Z): 700 MM SPEED MAXIMUM 4000 U/MIN WITH THE FOLLOWING ACCESSORIES: SLIDING SCREEN DESIGN WITH INTERIOR LIGHTING 8 X TURRET VDI 30 24 PCS. VDI 30 TOOL HOLDERS TAILSTOCK WITH QUILL 3 JAW CHUCK HYDRAULIC 0 210 MM (SCHUNK ROTA NCK PLUS) HYDRAULIC CHUCK FOOT SWITCH CHIP CONVEYOR COOLANT SYSTEM CHIP TRAY OPERATING INSTRUCTIONS
Vendedor: Martin Beschle Werkzeuge & Maschinen GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 200 €
Ubicación: Land-weight approx.: 220 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 330 mm<br/>description: - WEIGHT APPROX.: 220 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 330 MM
DESCRIPTION: -
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cnc multi-tasking lathe
nakamura super ntx-s
reference no.: 18038
mfg. year 2007
s/no. v300901
fanuc 16i-tb
luckbei-dialog system supercap
maximum turning diameter
-upper turret 390 mm
-lower turret 300 mm
maximum turning length 1,100 mm
max cash working capacity 65 mm
milling spindle ac 18.5/11 kw
milling spindle maximum speed 12,000 rpm
capto c6
servo controlled b-axis, 230â°
y-axis 160 mm
atc with 40 tools
main and sub spindle ac 22/18.5 kw
main and sub spindle maximum speed 4.500 rpm
12/24-station turret, all stations for driven tools
maximum speed of driven tools 3,600 rpm
2 off. 3-jawchuck 210 mm, schunk
coolant tank 250 liters
high pressure pumps
swarf conveyor
1 set of toolholders for lower turret
-static 9, 3-driven
weight 19,000 kg
ce-mark CNC MULTI-TASKING LATHE NAKAMURA SUPER NTX-S REFERENCE NO.: 18038 MFG. YEAR 2007 S/NO. V300901 FANUC 16I-TB LUCKBEI-DIALOG SYSTEM SUPERCAP MAXIMUM TURNING DIAMETER -UPPER TURRET 390 MM -LOWER TURRET 300 MM MAXIMUM TURNING LENGTH 1,100 MM MAX CASH WORKING CAPACITY 65 MM MILLING SPINDLE AC 18.5/11 KW MILLING SPINDLE MAXIMUM SPEED 12,000 RPM CAPTO C6 SERVO CONTROLLED B-AXIS, 230&ACIRC;&DEG; Y-AXIS 160 MM ATC WITH 40 TOOLS MAIN AND SUB SPINDLE AC 22/18.5 KW MAIN AND SUB SPINDLE MAXIMUM SPEED 4.500 RPM 12/24-STATION TURRET, ALL STATIONS FOR DRIVEN TOOLS MAXIMUM SPEED OF DRIVEN TOOLS 3,600 RPM 2 OFF. 3-JAWCHUCK 210 MM, SCHUNK COOLANT TANK 250 LITERS HIGH PRESSURE PUMPS SWARF CONVEYOR 1 SET OF TOOLHOLDERS FOR LOWER TURRET -STATIC 9, 3-DRIVEN WEIGHT 19,000 KG CE-MARK
Vendedor: TÖRNER CNC Maschinen
Año de construcción: usado
Precio: used machinery auction RESALE 200 €
Ubicación: Land-weight approx.: 210 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 330 mm<br/>description: - fwb315-425, cd32-70 / 150 etc.<br> - different manufacturers such as forkardt and schunk WEIGHT APPROX.: 210 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 330 MM
DESCRIPTION: - FWB315-425, CD32-70 / 150 ETC.
- DIFFERENT MANUFACTURERS SUCH AS FORKARDT AND SCHUNK
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-we sell fanuc type: m-6ib, production year 2005 with r-j3ib b driver with 61100 standard hours.
the robot is in good condition (maintenance service from preventive maintenance available).
we supply accessories to him:

1. stand
2. schunk pgn + 80/1 parallel gripper
3. valve terminal festo cpv10-vi-10p-10-c4-mp-n-y-2j2l + rw controlled externally from the plc
4. documentation WE SELL FANUC TYPE: M-6IB, PRODUCTION YEAR 2005 WITH R-J3IB B DRIVER WITH 61100 STANDARD HOURS. THE ROBOT IS IN GOOD CONDITION (MAINTENANCE SERVICE FROM PREVENTIVE MAINTENANCE AVAILABLE). WE SUPPLY ACCESSORIES TO HIM: 1. STAND 2. SCHUNK PGN + 80/1 PARALLEL GRIPPER 3. VALVE TERMINAL FESTO CPV10-VI-10P-10-C4-MP-N-Y-2J2L + RW CONTROLLED EXTERNALLY FROM THE PLC 4. DOCUMENTATION
Vendedor: BASTA machinery
Año de construcción: usado
Precio: used machinery auction RESALE 180 €
Ubicación: Land-weight approx.: 370 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 540 mm<br/>description: - fwb315 / ffa315<br> - several manufacturer, i.a. schunk and forkardt WEIGHT APPROX.: 370 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 540 MM
DESCRIPTION: - FWB315 / FFA315
- SEVERAL MANUFACTURER, I.A. SCHUNK AND FORKARDT
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-control: heidenhain manual plus 620
-tool holder: 8facher revolver, duplomatic.
-three jaw chuck êºschunkêº ã¸ 315 mm.
workspace
swing over bed 550 mm
swing over cross beam 350 mm
top width 1600 mm
maximum workpiece weight 1000 mm

work spindle
spindle nose 8
spindle bore 82 mm
spindle taper - metric 90

main drive
17 kw
automatic two speed gearbox 2 levels
spindle speed range 0-3000 rpm
1. level 0-600 rpm
2. level 20-3000 rpm
maximum torque at the spindle:
at the 1st level 1300 nm
at the 2nd stage of 295 nm
x-axis
max.verfahrweg 285 mm
rapid traverse 10'000 mm/min.

z axis
maximum travel distance 1590 mm
rapid traverse 10000 mm / min.

tailstock
quill diameter 90 mm
quill stroke 160 mm
inner cone morse 5 in pinole

dimensions of the machine
l x w x h 3238 x 1920 x 1755 mm
weight of machine 3400 kg
 CONTROL: HEIDENHAIN MANUAL PLUS 620 -TOOL HOLDER: 8FACHER REVOLVER, DUPLOMATIC. -THREE JAW CHUCK &ECIRC;&ORDM;SCHUNK&ECIRC;&ORDM; &ATILDE;&CEDIL; 315 MM. WORKSPACE SWING OVER BED 550 MM SWING OVER CROSS BEAM 350 MM TOP WIDTH 1600 MM MAXIMUM WORKPIECE WEIGHT 1000 MM WORK SPINDLE SPINDLE NOSE 8 SPINDLE BORE 82 MM SPINDLE TAPER - METRIC 90 MAIN DRIVE 17 KW AUTOMATIC TWO SPEED GEARBOX 2 LEVELS SPINDLE SPEED RANGE 0-3000 RPM 1. LEVEL 0-600 RPM 2. LEVEL 20-3000 RPM MAXIMUM TORQUE AT THE SPINDLE: AT THE 1ST LEVEL 1300 NM AT THE 2ND STAGE OF 295 NM X-AXIS MAX.VERFAHRWEG 285 MM RAPID TRAVERSE 10'000 MM/MIN. Z AXIS MAXIMUM TRAVEL DISTANCE 1590 MM RAPID TRAVERSE 10000 MM / MIN. TAILSTOCK QUILL DIAMETER 90 MM QUILL STROKE 160 MM INNER CONE MORSE 5 IN PINOLE DIMENSIONS OF THE MACHINE L X W X H 3238 X 1920 X 1755 MM WEIGHT OF MACHINE 3400 KG
Vendedor: Catalano Werkzeugmaschinen AG
Año de construcción: usado
Precio: used machinery auction RESALE 250 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 600 mm<br/>description: - several manufacturer, i.a. garant, holex, schunk, seco<br> WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 600 MM
DESCRIPTION: - SEVERAL MANUFACTURER, I.A. GARANT, HOLEX, SCHUNK, SECO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-control fs 100
robot yaskawa 5 kg
schunk grab 2-fold
20 pallets size 600x400 mm
pneumatic turning station
workpiece sensor


  CONTROL FS 100 ROBOT YASKAWA 5 KG SCHUNK GRAB 2-FOLD 20 PALLETS SIZE 600X400 MM PNEUMATIC TURNING STATION WORKPIECE SENSOR
Vendedor: WMH24
Año de construcción: usado
Ubicación: Land-weight approx.: 21500 kg<br/>dimensions (l x w x h) approx.: 8000 x 4500 x 3200 mm<br/>description: x= 2600 mm y=700 mm z=850 mm table clamping surface 3080 x 800 mm tool holder hsk a 63 speed 10,000 r / min tool changer 72 pcs. control heidenhain itnc 530 mm 2 x zero-point clamping system schunk extensive tool equipment approx. 2,800 hours of operation, (without tools and vices) machine can be inspected under power WEIGHT APPROX.: 21500 KG
DIMENSIONS (L X W X H) APPROX.: 8000 X 4500 X 3200 MM
DESCRIPTION: X= 2600 MM Y=700 MM Z=850 MM TABLE CLAMPING SURFACE 3080 X 800 MM TOOL HOLDER HSK A 63 SPEED 10,000 R / MIN TOOL CHANGER 72 PCS. CONTROL HEIDENHAIN ITNC 530 MM 2 X ZERO-POINT CLAMPING SYSTEM SCHUNK EXTENSIVE TOOL EQUIPMENT APPROX. 2,800 HOURS OF OPERATION, (WITHOUT TOOLS AND VICES) MACHINE CAN BE INSPECTED UNDER POWER
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-overview:
brand: traub
model: tnc 42
application type: turning
machine type: lathe
availability: immediately
construction year: 2004
production hours: 41067
location: italy
origin country: germany

general data:
measurements width: 4250 mm
measurements depth: 2800 mm
measurements height: 1917 mm
machine weight: 4800 kg

main drive:
number of spindle: 2
spindle speed range: 5600 1/min

control unit:
brand: traub
model: system tx 8h

movement:
x-axis movement: 140 mm
y-axis movement: ±35 mm
z-axis movement: 450 mm

workpiece:
workpiece drm: 192 mm
workpiece x: 140 mm
workpiece y: 450 mm

turret:
number of turrets: 2

media:
main electronic connection: 400 v /50 hz
power consumption: 18.5 kva
chip conveyer: yes
internal cooling: yes

additional equipment:
1-	33 tool holders capto (sandwik)
2-	1 motorized traub
3-	2 hidraulic clamps (hainbuch)
4-	1 self-centering tool (rohm)
5-	1 clamp holder (hainbuch)
6-	1 workpiece chucks (schunk)
7-	high pressure pump


see full technical specifications of this machine at:
abc://bit.ly/2qnuh6k OVERVIEW: BRAND: TRAUB MODEL: TNC 42 APPLICATION TYPE: TURNING MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY CONSTRUCTION YEAR: 2004 PRODUCTION HOURS: 41067 LOCATION: ITALY ORIGIN COUNTRY: GERMANY GENERAL DATA: MEASUREMENTS WIDTH: 4250 MM MEASUREMENTS DEPTH: 2800 MM MEASUREMENTS HEIGHT: 1917 MM MACHINE WEIGHT: 4800 KG MAIN DRIVE: NUMBER OF SPINDLE: 2 SPINDLE SPEED RANGE: 5600 1/MIN CONTROL UNIT: BRAND: TRAUB MODEL: SYSTEM TX 8H MOVEMENT: X-AXIS MOVEMENT: 140 MM Y-AXIS MOVEMENT: ±35 MM Z-AXIS MOVEMENT: 450 MM WORKPIECE: WORKPIECE DRM: 192 MM WORKPIECE X: 140 MM WORKPIECE Y: 450 MM TURRET: NUMBER OF TURRETS: 2 MEDIA: MAIN ELECTRONIC CONNECTION: 400 V /50 HZ POWER CONSUMPTION: 18.5 KVA CHIP CONVEYER: YES INTERNAL COOLING: YES ADDITIONAL EQUIPMENT: 1- 33 TOOL HOLDERS CAPTO (SANDWIK) 2- 1 MOTORIZED TRAUB 3- 2 HIDRAULIC CLAMPS (HAINBUCH) 4- 1 SELF-CENTERING TOOL (ROHM) 5- 1 CLAMP HOLDER (HAINBUCH) 6- 1 WORKPIECE CHUCKS (SCHUNK) 7- HIGH PRESSURE PUMP SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2QNUH6K
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 120 €
Ubicación: Land-weight approx.: 250 kg<br/>dimensions (l x w x h) approx.: 800 x 720 x 1180 mm<br/>description: - with 9 drawers<br> - content: metal pins, allen wrench, hook wrench, pliers, ring wrench, inserts, turning tools, jaws for 3-jaw chuck schunk, 1 x swb 250<br> - on mobile base WEIGHT APPROX.: 250 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 720 X 1180 MM
DESCRIPTION: - WITH 9 DRAWERS
- CONTENT: METAL PINS, ALLEN WRENCH, HOOK WRENCH, PLIERS, RING WRENCH, INSERTS, TURNING TOOLS, JAWS FOR 3-JAW CHUCK SCHUNK, 1 X SWB 250
- ON MOBILE BASE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-overview:
brand: traub
model: tnc 42
application type: turning
machine type: lathe
availability: immediately
construction year: 2003
production hours: 42050
location: italy
origin country: germany

general data:
measurements width: 4250 mm
measurements depth: 2800 mm
measurements height: 1917 mm
machine weight: 4800 kg

main drive:
number of spindle: 2
spindle speed range: 5600 1/min

control unit:
brand: traub
model: system tx 8h

movement:
x-axis movement: 140 mm
y-axis movement: ±35 mm
z-axis movement: 450 mm

workpiece:
workpiece drm: 192 mm
workpiece x: 140 mm
workpiece y: 450 mm

turret:
number of turrets: 2

media:
main electronic connection: 400 v /50 hz
power consumption: 18.5 kva
chip conveyer: yes
internal cooling: yes

additional equipment:
1-	33 tool holders capto (sandwik)
2-	1 motorized traub
3-	2 hidraulic clamps (hainbuch)
4-	1 self-centering tool (rohm)
5-	1 clamp holder (hainbuch)
6-	1 workpiece chucks (schunk)
7-	high pressure pump



see full technical specifications of this machine at:
abc://bit.ly/2pwhrbh
 OVERVIEW: BRAND: TRAUB MODEL: TNC 42 APPLICATION TYPE: TURNING MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY CONSTRUCTION YEAR: 2003 PRODUCTION HOURS: 42050 LOCATION: ITALY ORIGIN COUNTRY: GERMANY GENERAL DATA: MEASUREMENTS WIDTH: 4250 MM MEASUREMENTS DEPTH: 2800 MM MEASUREMENTS HEIGHT: 1917 MM MACHINE WEIGHT: 4800 KG MAIN DRIVE: NUMBER OF SPINDLE: 2 SPINDLE SPEED RANGE: 5600 1/MIN CONTROL UNIT: BRAND: TRAUB MODEL: SYSTEM TX 8H MOVEMENT: X-AXIS MOVEMENT: 140 MM Y-AXIS MOVEMENT: ±35 MM Z-AXIS MOVEMENT: 450 MM WORKPIECE: WORKPIECE DRM: 192 MM WORKPIECE X: 140 MM WORKPIECE Y: 450 MM TURRET: NUMBER OF TURRETS: 2 MEDIA: MAIN ELECTRONIC CONNECTION: 400 V /50 HZ POWER CONSUMPTION: 18.5 KVA CHIP CONVEYER: YES INTERNAL COOLING: YES ADDITIONAL EQUIPMENT: 1- 33 TOOL HOLDERS CAPTO (SANDWIK) 2- 1 MOTORIZED TRAUB 3- 2 HIDRAULIC CLAMPS (HAINBUCH) 4- 1 SELF-CENTERING TOOL (ROHM) 5- 1 CLAMP HOLDER (HAINBUCH) 6- 1 WORKPIECE CHUCKS (SCHUNK) 7- HIGH PRESSURE PUMP SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2PWHRBH
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-weight approx.: 300 kg<br/>dimensions (l x w x h) approx.: 800 x 2200 x 700 mm<br/>description: 1-axis-precision indexing device with manual clamping chuck schunk rota - s plus 200-52<br> including clamping plate, tailstock and various accessories<br> WEIGHT APPROX.: 300 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 2200 X 700 MM
DESCRIPTION: 1-AXIS-PRECISION INDEXING DEVICE WITH MANUAL CLAMPING CHUCK SCHUNK ROTA - S PLUS 200-52
INCLUDING CLAMPING PLATE, TAILSTOCK AND VARIOUS ACCESSORIES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-control: mazatrol matrix nexus 2
description
-tool magazine for 120 tools
-stand boost 200 mm
-renishaw measuring sensor
-4th axis kitagwa
-zero point clamping system from schunk
-various vices by schunk
-150 pcs. tool mounting sk 50
-high pressure cooling 30 bar
-conveyors
-1 set of manuals
x trail 1500 mm
y-way 800 mm
z-way 660 mm
1740 x 750 mm table size
table load of up to 2500 kg
spindle speed 10'000 rpm.
rapid 40 / 40 / 30 m / min.
recording	

 CONTROL: MAZATROL MATRIX NEXUS 2 DESCRIPTION -TOOL MAGAZINE FOR 120 TOOLS -STAND BOOST 200 MM -RENISHAW MEASURING SENSOR -4TH AXIS KITAGWA -ZERO POINT CLAMPING SYSTEM FROM SCHUNK -VARIOUS VICES BY SCHUNK -150 PCS. TOOL MOUNTING SK 50 -HIGH PRESSURE COOLING 30 BAR -CONVEYORS -1 SET OF MANUALS X TRAIL 1500 MM Y-WAY 800 MM Z-WAY 660 MM 1740 X 750 MM TABLE SIZE TABLE LOAD OF UP TO 2500 KG SPINDLE SPEED 10'000 RPM. RAPID 40 / 40 / 30 M / MIN. RECORDING
Vendedor: Catalano Werkzeugmaschinen AG
Año de construcción: usado
Precio: 55 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-cycle-controlled lathe gildemeister nef 320

with control manual plus 4110
year of construction: 2005
spindle bore: 50.8 mm
top width: 750 mm
o bed circulation: 320 mm
circulation o over cross slide: 150 mm
tip height: 160 mm
speed range: 10-4000 rpm infinitely variable with the following accessories:

sliding screen design with interior lighting
multifix tool holders
3 jaw chuck schunk rota - s plus 0 200 mm
1 set of soft jaws
icp contour programming
tailstock with retractable boring quill
chip tray
coolant system
operating instructions CYCLE-CONTROLLED LATHE GILDEMEISTER NEF 320 WITH CONTROL MANUAL PLUS 4110 YEAR OF CONSTRUCTION: 2005 SPINDLE BORE: 50.8 MM TOP WIDTH: 750 MM O BED CIRCULATION: 320 MM CIRCULATION O OVER CROSS SLIDE: 150 MM TIP HEIGHT: 160 MM SPEED RANGE: 10-4000 RPM INFINITELY VARIABLE WITH THE FOLLOWING ACCESSORIES: SLIDING SCREEN DESIGN WITH INTERIOR LIGHTING MULTIFIX TOOL HOLDERS 3 JAW CHUCK SCHUNK ROTA - S PLUS 0 200 MM 1 SET OF SOFT JAWS ICP CONTOUR PROGRAMMING TAILSTOCK WITH RETRACTABLE BORING QUILL CHIP TRAY COOLANT SYSTEM OPERATING INSTRUCTIONS
Vendedor: Martin Beschle Werkzeuge & Maschinen GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 660 mm<br/>turning length: 1045 mm<br/>control: mazatrol pc fusion 640mt <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>mazatrol pc fusion 640 mt<br/>milling spindle above for turning and milling tools (b-axis)<br/>2x c-axis<br/>y-axis<br/>120-fold magazine (tool taper capto c6)<br/>main spindle: 3-jaw chuck schunk / hainbuch collet chuck device<br/>sub spindle: 3-jaw chuck schunk / hainbuch collet chuck device<br/>software for hobbing<br/>option package 5 axes simultan working<br/>knoll high pressure coolant device 70bar<br/>irco short bar loading device<br/><br/>technische daten / technical details:<br/>umlaufdurchmesser über bett / rotary diameter over bed    660    mm<br/>umlaufdurchmesser über schlitten / rotary diameter over sledge    660    mm<br/>max. drehdurchmesser / max. turning diameter    660    mm<br/>max. durchmesser bei stangenarbeiten / max. diameter at bar working    65    mm<br/>verfahrweg x-achse / travel x-axis    580    mm<br/>verfahrweg z-achse / travel z-axis    1045    mm<br/>verfahrweg y-achse / travel y-axis    +-80    mm<br/>verfahrweg w-achse / travel w-axis    1050    mm<br/>schwenkbereich b-achse / swivel range b-axis    -30 / +195    °<br/>drehzahlbereich / spindle speed range    35-5000    upm / rpm<br/>werkzeugaufnahme frässpindel / tool taper milling spindle    capto c6    <br/>drehzahlbereich frässpindel /speed of milling spindle    15-12000    upm / rpm<br/>anzahl der magazinplätze / number of places in magazine    120    fach /fold<br/>eilgang x,y,z / rapid feed x,y,z    38/26/38    m/min<br/>antriebsleistung haupt-/ gegenspindel 30%ed / drive capacity main spindle / sub <br/>spindle 30%ed    22/18,5    kw<br/>gewicht der maschine / weight    9700    kg<br/>technische daten, zubehör und beschreibung der maschine sind unverbindlich -<br/>technical data, accessories and description of the machine are not binding.<br/><br/><br/><br/><br/><br/> TURNING DIAMETER: 660 MM
TURNING LENGTH: 1045 MM
CONTROL: MAZATROL PC FUSION 640MT
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
MAZATROL PC FUSION 640 MT
MILLING SPINDLE ABOVE FOR TURNING AND MILLING TOOLS (B-AXIS)
2X C-AXIS
Y-AXIS
120-FOLD MAGAZINE (TOOL TAPER CAPTO C6)
MAIN SPINDLE: 3-JAW CHUCK SCHUNK / HAINBUCH COLLET CHUCK DEVICE
SUB SPINDLE: 3-JAW CHUCK SCHUNK / HAINBUCH COLLET CHUCK DEVICE
SOFTWARE FOR HOBBING
OPTION PACKAGE 5 AXES SIMULTAN WORKING
KNOLL HIGH PRESSURE COOLANT DEVICE 70BAR
IRCO SHORT BAR LOADING DEVICE

TECHNISCHE DATEN / TECHNICAL DETAILS:
UMLAUFDURCHMESSER üBER BETT / ROTARY DIAMETER OVER BED 660 MM
UMLAUFDURCHMESSER üBER SCHLITTEN / ROTARY DIAMETER OVER SLEDGE 660 MM
MAX. DREHDURCHMESSER / MAX. TURNING DIAMETER 660 MM
MAX. DURCHMESSER BEI STANGENARBEITEN / MAX. DIAMETER AT BAR WORKING 65 MM
VERFAHRWEG X-ACHSE / TRAVEL X-AXIS 580 MM
VERFAHRWEG Z-ACHSE / TRAVEL Z-AXIS 1045 MM
VERFAHRWEG Y-ACHSE / TRAVEL Y-AXIS +-80 MM
VERFAHRWEG W-ACHSE / TRAVEL W-AXIS 1050 MM
SCHWENKBEREICH B-ACHSE / SWIVEL RANGE B-AXIS -30 / +195 °
DREHZAHLBEREICH / SPINDLE SPEED RANGE 35-5000 UPM / RPM
WERKZEUGAUFNAHME FRäSSPINDEL / TOOL TAPER MILLING SPINDLE CAPTO C6
DREHZAHLBEREICH FRäSSPINDEL /SPEED OF MILLING SPINDLE 15-12000 UPM / RPM
ANZAHL DER MAGAZINPLäTZE / NUMBER OF PLACES IN MAGAZINE 120 FACH /FOLD
EILGANG X,Y,Z / RAPID FEED X,Y,Z 38/26/38 M/MIN
ANTRIEBSLEISTUNG HAUPT-/ GEGENSPINDEL 30%ED / DRIVE CAPACITY MAIN SPINDLE / SUB
SPINDLE 30%ED 22/18,5 KW
GEWICHT DER MASCHINE / WEIGHT 9700 KG
TECHNISCHE DATEN, ZUBEHöR UND BESCHREIBUNG DER MASCHINE SIND UNVERBINDLICH -
TECHNICAL DATA, ACCESSORIES AND DESCRIPTION OF THE MACHINE ARE NOT BINDING.





Vendedor: Gustav Schönberger GmbH
Año de construcción: usado
Ubicación: Land-cycle-controlled lathe gildemeister nef 320
with control manual plus 4110
year of construction: 2003
spindle bore: 50.8 mm
top width: 750 mm
o bed circulation: 320 mm
circulation o over cross slide: 150 mm
tip height: 160 mm
speed range: 10-4000 rpm infinitely variable with the following accessories:

sliding screen design with interior lighting
parat tool holder with 11 pcs operations
3 jaw chuck schunk rota - s plus 0 200 mm
1 set of hard jaws, 6 set of soft jaws
1 live centre point
icp contour programming
tailstock with retractable boring quill
chip tray
coolant system
6 pcs. machine shoes
operating instructions CYCLE-CONTROLLED LATHE GILDEMEISTER NEF 320 WITH CONTROL MANUAL PLUS 4110 YEAR OF CONSTRUCTION: 2003 SPINDLE BORE: 50.8 MM TOP WIDTH: 750 MM O BED CIRCULATION: 320 MM CIRCULATION O OVER CROSS SLIDE: 150 MM TIP HEIGHT: 160 MM SPEED RANGE: 10-4000 RPM INFINITELY VARIABLE WITH THE FOLLOWING ACCESSORIES: SLIDING SCREEN DESIGN WITH INTERIOR LIGHTING PARAT TOOL HOLDER WITH 11 PCS OPERATIONS 3 JAW CHUCK SCHUNK ROTA - S PLUS 0 200 MM 1 SET OF HARD JAWS, 6 SET OF SOFT JAWS 1 LIVE CENTRE POINT ICP CONTOUR PROGRAMMING TAILSTOCK WITH RETRACTABLE BORING QUILL CHIP TRAY COOLANT SYSTEM 6 PCS. MACHINE SHOES OPERATING INSTRUCTIONS
Vendedor: Martin Beschle Werkzeuge & Maschinen GmbH
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 380 mm<br/>turning diameter over slide rest: 200 mm<br/>turning length: 800 mm<br/>turning speed range: 28 - 1250 u/min<br/>3-jaw chuck: Ø 250 mm<br/>spindle bore: 56 mm<br/>tool-holder: multifix gr. d <br/>live center: ja <br/>coolant: ja <br/>weight of the machine ca.: 1,9 t<br/>dimensions: ca. 2500 x 1100 x 1250 mm<br/>included:<br/>schunk 3-jaw chuck rota s250-62with diverse hardened base jaws, soft jaws and top jaws<br/>1 multifix tool holder, size d<br/>swarf container<br/><br/><br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 380 MM
TURNING DIAMETER OVER SLIDE REST: 200 MM
TURNING LENGTH: 800 MM
TURNING SPEED RANGE: 28 - 1250 U/MIN
3-JAW CHUCK: Ø 250 MM
SPINDLE BORE: 56 MM
TOOL-HOLDER: MULTIFIX GR. D
LIVE CENTER: JA
COOLANT: JA
WEIGHT OF THE MACHINE CA.: 1,9 T
DIMENSIONS: CA. 2500 X 1100 X 1250 MM
INCLUDED:
SCHUNK 3-JAW CHUCK ROTA S250-62WITH DIVERSE HARDENED BASE JAWS, SOFT JAWS AND TOP JAWS
1 MULTIFIX TOOL HOLDER, SIZE D
SWARF CONTAINER






Vendedor: WeMa A. Pigge GmbH
Año de construcción: usado
Ubicación: Land-overview:
brand: kuka
model: kr 100-2 ha
application type: robotics
machine type: robot
availability: immediately
construction year: 2009
production hours: 0
location: germany
origin country: germany


the cell consists of 3 kuka kr 100-2 ha with krc2 controller. two robots are equipped with arm extension. the tig welding robot has 2 additional axes for driving the tilt and turn table. the tilt and turn table has a capacity of approx. 1000 kg. the robots are equipped with kuka safe operation v2.1, motion cooperation 2.1 (the two on the linear axis) and touch sense 1.2. one of the two robots on the linear axis also has two additional axes for controlling the linear axis and the lathe chuck. the linear axis has a length of 8300 mm. due to a business change of the company the automation cell has never been used and comes with 0 production hours. the cell can also be customized according to your production needs.


additional equipment:

- one of the robots has a fixed precitec yw 52 f100/250 llk welding head with cross-jet. the welding head is equipped with a beam splitter module for connecting a kappa observation camera.

- the other two robots are equipped with schunk quick couplers swk210 and one with collision and overload protection opr 131 and can be equipped with various tools. 

- further technical data on request.
 OVERVIEW: BRAND: KUKA MODEL: KR 100-2 HA APPLICATION TYPE: ROBOTICS MACHINE TYPE: ROBOT AVAILABILITY: IMMEDIATELY CONSTRUCTION YEAR: 2009 PRODUCTION HOURS: 0 LOCATION: GERMANY ORIGIN COUNTRY: GERMANY THE CELL CONSISTS OF 3 KUKA KR 100-2 HA WITH KRC2 CONTROLLER. TWO ROBOTS ARE EQUIPPED WITH ARM EXTENSION. THE TIG WELDING ROBOT HAS 2 ADDITIONAL AXES FOR DRIVING THE TILT AND TURN TABLE. THE TILT AND TURN TABLE HAS A CAPACITY OF APPROX. 1000 KG. THE ROBOTS ARE EQUIPPED WITH KUKA SAFE OPERATION V2.1, MOTION COOPERATION 2.1 (THE TWO ON THE LINEAR AXIS) AND TOUCH SENSE 1.2. ONE OF THE TWO ROBOTS ON THE LINEAR AXIS ALSO HAS TWO ADDITIONAL AXES FOR CONTROLLING THE LINEAR AXIS AND THE LATHE CHUCK. THE LINEAR AXIS HAS A LENGTH OF 8300 MM. DUE TO A BUSINESS CHANGE OF THE COMPANY THE AUTOMATION CELL HAS NEVER BEEN USED AND COMES WITH 0 PRODUCTION HOURS. THE CELL CAN ALSO BE CUSTOMIZED ACCORDING TO YOUR PRODUCTION NEEDS. ADDITIONAL EQUIPMENT: - ONE OF THE ROBOTS HAS A FIXED PRECITEC YW 52 F100/250 LLK WELDING HEAD WITH CROSS-JET. THE WELDING HEAD IS EQUIPPED WITH A BEAM SPLITTER MODULE FOR CONNECTING A KAPPA OBSERVATION CAMERA. - THE OTHER TWO ROBOTS ARE EQUIPPED WITH SCHUNK QUICK COUPLERS SWK210 AND ONE WITH COLLISION AND OVERLOAD PROTECTION OPR 131 AND CAN BE EQUIPPED WITH VARIOUS TOOLS. - FURTHER TECHNICAL DATA ON REQUEST.
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-swing over bed: 810 mm<br/>swing diameter over face slide: 560 mm<br/>turning length: 2000 mm<br/>bed width: 480 mm<br/>radial face slide travel: 400 mm<br/>upper slide-adjustment: 180 kw<br/>spindle turning speed range: (24) 9 - 1800 u/min<br/>spindle bore: 106 mm<br/>feeds - longitudinal: 0,092 - 41 mm/u<br/>feeds - cross: 0,092 - 20 mm/u<br/>tailstock quill diameter: 115 mm<br/>tailstock quill stroke: 225 mm<br/>tailstock quill taper mt: 6 <br/>main drive motor: 22 kw<br/>max. torque on the spindle: 3200 nm<br/>max. workpiece weight between centres: 2000 kg<br/>workpiece weight in steadies max.: 2500 kg<br/>max. workpiece weight -without tailstock: 750 kg<br/>weight of the machine ca.: 4300 kg<br/>dimensions of the machine ca.: 4600 x 1900 x 1600 mm<br/>equipment:<br/>3-axis d.r.o make acu-rite<br/>4-jaw face plate make rÖhm, diameter 550 mm<br/>3-jaw chuck make schunk, rotas plus 400-102<br/>fixed steady rest passage 20 to 300 mm<br/>moving steady rest passage 20 to 180 mm<br/>rapid traverse in all axes<br/>automatic feed in upper slide<br/>taper turning attachment<br/>multifix toolholder size c with one insert<br/>longitudinal stop, plane stop<br/>halogen machine lamp<br/>coolant system<br/>back chip back wall<br/>machine documentation<br/><br/><br/><br/><br/><br/> SWING OVER BED: 810 MM
SWING DIAMETER OVER FACE SLIDE: 560 MM
TURNING LENGTH: 2000 MM
BED WIDTH: 480 MM
RADIAL FACE SLIDE TRAVEL: 400 MM
UPPER SLIDE-ADJUSTMENT: 180 KW
SPINDLE TURNING SPEED RANGE: (24) 9 - 1800 U/MIN
SPINDLE BORE: 106 MM
FEEDS - LONGITUDINAL: 0,092 - 41 MM/U
FEEDS - CROSS: 0,092 - 20 MM/U
TAILSTOCK QUILL DIAMETER: 115 MM
TAILSTOCK QUILL STROKE: 225 MM
TAILSTOCK QUILL TAPER MT: 6
MAIN DRIVE MOTOR: 22 KW
MAX. TORQUE ON THE SPINDLE: 3200 NM
MAX. WORKPIECE WEIGHT BETWEEN CENTRES: 2000 KG
WORKPIECE WEIGHT IN STEADIES MAX.: 2500 KG
MAX. WORKPIECE WEIGHT -WITHOUT TAILSTOCK: 750 KG
WEIGHT OF THE MACHINE CA.: 4300 KG
DIMENSIONS OF THE MACHINE CA.: 4600 X 1900 X 1600 MM
EQUIPMENT:
3-AXIS D.R.O MAKE ACU-RITE
4-JAW FACE PLATE MAKE RÖHM, DIAMETER 550 MM
3-JAW CHUCK MAKE SCHUNK, ROTAS PLUS 400-102
FIXED STEADY REST PASSAGE 20 TO 300 MM
MOVING STEADY REST PASSAGE 20 TO 180 MM
RAPID TRAVERSE IN ALL AXES
AUTOMATIC FEED IN UPPER SLIDE
TAPER TURNING ATTACHMENT
MULTIFIX TOOLHOLDER SIZE C WITH ONE INSERT
LONGITUDINAL STOP, PLANE STOP
HALOGEN MACHINE LAMP
COOLANT SYSTEM
BACK CHIP BACK WALL
MACHINE DOCUMENTATION





Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-the machines have been with us in the year 2013/2015/2016 in operation.

the 3 machines running all reliable and are in good condition.

always the same parts with 250gramm weight were manufactured.

our machines have the hã¤berle paternoster with alukassetten and a linear grippers from schunk with reverse unit.
the cartridges are ideal for loading with hm blanks from 3mm up to 25mm
hã¤berle software, cooling channel connection, weldonfã¤chen, full radius, allen can be ground and much more.
workpiece magazine up to 800 pieces

there are 3 machines to choose from:

machine 1: in the foreground is the latest machine from 2016.
machine 2: in the middle with the blue door is the machine from 2013
machine 3: in the background the machine from 2015

machine 1: starting 6/2016
the machine can now be sold/delivered to.

machine 2: commissioning 2013
the machine can now be sold/delivered to.

machine 3: start-up 2015
the machine can now be sold/delivered to.
 

i'm going to sell one of the 3 machines. on request all 3 together.
that doesn't matter, because all work reliably.
the machines can visit at any time in full operation and test all functions.

there is also a suitable centrifuge from ruma centrifuges. THE MACHINES HAVE BEEN WITH US IN THE YEAR 2013/2015/2016 IN OPERATION. THE 3 MACHINES RUNNING ALL RELIABLE AND ARE IN GOOD CONDITION. ALWAYS THE SAME PARTS WITH 250GRAMM WEIGHT WERE MANUFACTURED. OUR MACHINES HAVE THE H&ATILDE;&CURREN;BERLE PATERNOSTER WITH ALUKASSETTEN AND A LINEAR GRIPPERS FROM SCHUNK WITH REVERSE UNIT. THE CARTRIDGES ARE IDEAL FOR LOADING WITH HM BLANKS FROM 3MM UP TO 25MM H&ATILDE;&CURREN;BERLE SOFTWARE, COOLING CHANNEL CONNECTION, WELDONF&ATILDE;&CURREN;CHEN, FULL RADIUS, ALLEN CAN BE GROUND AND MUCH MORE. WORKPIECE MAGAZINE UP TO 800 PIECES THERE ARE 3 MACHINES TO CHOOSE FROM: MACHINE 1: IN THE FOREGROUND IS THE LATEST MACHINE FROM 2016. MACHINE 2: IN THE MIDDLE WITH THE BLUE DOOR IS THE MACHINE FROM 2013 MACHINE 3: IN THE BACKGROUND THE MACHINE FROM 2015 MACHINE 1: STARTING 6/2016 THE MACHINE CAN NOW BE SOLD/DELIVERED TO. MACHINE 2: COMMISSIONING 2013 THE MACHINE CAN NOW BE SOLD/DELIVERED TO. MACHINE 3: START-UP 2015 THE MACHINE CAN NOW BE SOLD/DELIVERED TO. I'M GOING TO SELL ONE OF THE 3 MACHINES. ON REQUEST ALL 3 TOGETHER. THAT DOESN'T MATTER, BECAUSE ALL WORK RELIABLY. THE MACHINES CAN VISIT AT ANY TIME IN FULL OPERATION AND TEST ALL FUNCTIONS. THERE IS ALSO A SUITABLE CENTRIFUGE FROM RUMA CENTRIFUGES.
Vendedor: CUTEC cutting technology e.K.
Año de construcción: usado
Precio: 1.250 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-magnification: 5-50 times.  MAGNIFICATION: 5-50 TIMES.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 450 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-cnc lathe contur dialog 800
year of manufacture 09/2002
control: siemens 810 d
rotary diameter 800 mm
centre distance 3000 mm

equipped with tieflochbohreinrichtung
auxiliary coolant pump 50 bar
support drilling console for the recording of drill rods diameter 100 mm

boring bar for storing turnplates diameter 100 x 1000 mm
heavy metal - vibration damped boring bars diameter 50 x 650 mm
multi deep hole drill bit diameter 80 x 550 mm
multi deep hole drill bit diameter 70 mm x 450 mm
ready manual 4-wd holder 24/50
9 piece tool holder wd 24/50
1 piece boring bar holder
4 - jaw chuck, rohm diameter 800 mm
schunk wedge bar chucks 3-jaw diameter 600 mm
1 lynette diameter 315 mm
1 heavy duty lynette diameter 650
1 lynette lightweight diameter 550 mm

the machine is located in a very good condition and can be visited like power. CNC LATHE CONTUR DIALOG 800 YEAR OF MANUFACTURE 09/2002 CONTROL: SIEMENS 810 D ROTARY DIAMETER 800 MM CENTRE DISTANCE 3000 MM EQUIPPED WITH TIEFLOCHBOHREINRICHTUNG AUXILIARY COOLANT PUMP 50 BAR SUPPORT DRILLING CONSOLE FOR THE RECORDING OF DRILL RODS DIAMETER 100 MM BORING BAR FOR STORING TURNPLATES DIAMETER 100 X 1000 MM HEAVY METAL - VIBRATION DAMPED BORING BARS DIAMETER 50 X 650 MM MULTI DEEP HOLE DRILL BIT DIAMETER 80 X 550 MM MULTI DEEP HOLE DRILL BIT DIAMETER 70 MM X 450 MM READY MANUAL 4-WD HOLDER 24/50 9 PIECE TOOL HOLDER WD 24/50 1 PIECE BORING BAR HOLDER 4 - JAW CHUCK, ROHM DIAMETER 800 MM SCHUNK WEDGE BAR CHUCKS 3-JAW DIAMETER 600 MM 1 LYNETTE DIAMETER 315 MM 1 HEAVY DUTY LYNETTE DIAMETER 650 1 LYNETTE LIGHTWEIGHT DIAMETER 550 MM THE MACHINE IS LOCATED IN A VERY GOOD CONDITION AND CAN BE VISITED LIKE POWER.
Vendedor: W&T EFRA
Año de construcción: usado
Precio: 250 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-cnc lathe

guild master md3it

year 1991

quick-action chuck schunk 200

control epl epm

turning diameter 280 mm

turning length 600 mm

without tailstock

8-werkzeurevolver

4-way powered

chip conveyor

automatic door

weight 4, 5to

area (lxwxh) 3500x2500x2100mm)
 CNC LATHE GUILD MASTER MD3IT YEAR 1991 QUICK-ACTION CHUCK SCHUNK 200 CONTROL EPL EPM TURNING DIAMETER 280 MM TURNING LENGTH 600 MM WITHOUT TAILSTOCK 8-WERKZEUREVOLVER 4-WAY POWERED CHIP CONVEYOR AUTOMATIC DOOR WEIGHT 4, 5TO AREA (LXWXH) 3500X2500X2100MM)
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: 300 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-; good, fully functional state ; GOOD, FULLY FUNCTIONAL STATE
Vendedor: Weigel – Consulting
Año de construcción: usado
Ubicación: Land-make: schunk<br/>type of machine: rota s 315-92<br/> MAKE: SCHUNK
TYPE OF MACHINE: ROTA S 315-92
Vendedor: Erdmann Export-Import
Año de construcción: usado
Precio: 13.000 €
Ubicación: Land-make: fanuc robot
model: lr mate 200ic / 5l
mfg date: 04/2012
serial: available only for serious inquiries
controls: fanuc system r-30ia mate
fanuc i trailer
robot pedestal
dual drawer tray system
dual fixture plates, to keep at least 100 stacked parts
exit slide for robots to fall / slide finished parts
individual pzn 50 gripper
side shutter door for haas
single locking entry gate
steel basethat robot base, dual drawer system and guard mount on electrical
control valve for existing schunk ksp vise
design, construction and integration work
(installed in eagan on your existing haas vf-2ss)
not included: vision system, quick change hook mount, 2. pzn gripper
the machine has less than 500 hours
asset in excellent condition MAKE: FANUC ROBOT MODEL: LR MATE 200IC / 5L MFG DATE: 04/2012 SERIAL: AVAILABLE ONLY FOR SERIOUS INQUIRIES CONTROLS: FANUC SYSTEM R-30IA MATE FANUC I TRAILER ROBOT PEDESTAL DUAL DRAWER TRAY SYSTEM DUAL FIXTURE PLATES, TO KEEP AT LEAST 100 STACKED PARTS EXIT SLIDE FOR ROBOTS TO FALL / SLIDE FINISHED PARTS INDIVIDUAL PZN 50 GRIPPER SIDE SHUTTER DOOR FOR HAAS SINGLE LOCKING ENTRY GATE STEEL BASETHAT ROBOT BASE, DUAL DRAWER SYSTEM AND GUARD MOUNT ON ELECTRICAL CONTROL VALVE FOR EXISTING SCHUNK KSP VISE DESIGN, CONSTRUCTION AND INTEGRATION WORK (INSTALLED IN EAGAN ON YOUR EXISTING HAAS VF-2SS) NOT INCLUDED: VISION SYSTEM, QUICK CHANGE HOOK MOUNT, 2. PZN GRIPPER THE MACHINE HAS LESS THAN 500 HOURS ASSET IN EXCELLENT CONDITION
Vendedor: Wichelhaus GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-make: schunk<br/>type of machine: rota s 315-92<br/> MAKE: SCHUNK
TYPE OF MACHINE: ROTA S 315-92
Vendedor: Erdmann Export-Import
Año de construcción: usado
Precio: 420 €
Ubicación: Land-DE Germany, 42699 Solingen
Vendedor: G. Folmer Industriebedarf
Año de construcción: usado
Ubicación: Land-diameter: 500 mm<br/>4-jaws chuck without jaws.<br/><br/><br/><br/><br/> DIAMETER: 500 MM
4-JAWS CHUCK WITHOUT JAWS.




Vendedor: SK Maschinen-Service GmbH
Año de construcción: usado
Precio: 790 €
Ubicación: Land-DE Germany, 42699 Solingen
Vendedor: G. Folmer Industriebedarf
Año de construcción: usado
Ubicación: Land-<br>other info: magnet table <br><p>make schunk 2 x</p>
<p>type mfr</p>
<p>year 2007</p>
<p>magnet mounting system</p>
<p>lenght = 590</p>
<p>width = 630</p>
<p>1 x schunk qu 04 controller</p>
<p>weight each 175 kg </p>
<p>resistance 1.7 ohm incl. inserts</p>
<p>
OTHER INFO: MAGNET TABLE

MAKE SCHUNK 2 X

TYPE MFR

YEAR 2007

MAGNET MOUNTING SYSTEM

LENGHT = 590

WIDTH = 630

1 X SCHUNK QU 04 CONTROLLER

WEIGHT EACH 175 KG

RESISTANCE 1.7 OHM INCL. INSERTS

Vendedor: Mach4metal
Año de construcción: usado
Precio: 290 €
Ubicación: Land-DE Germany, 42699 Solingen
Vendedor: G. Folmer Industriebedarf
Año de construcción: usado
Ubicación: Land-stock # 6006

angular grippers

manufacturer: schunk
condition: new

2-finger angular grippers sgb 40
STOCK # 6006 ANGULAR GRIPPERS MANUFACTURER: SCHUNK CONDITION: NEW 2-FINGER ANGULAR GRIPPERS SGB 40
Vendedor: Pro-tech Kunststofftechnologie GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more SCHUNK types: