542 ofertas

Año de construcción: usado
Ubicación: Land-dough lamination line in u shape

technical specification:

- table profile width: 770mm
- conveyor belt width: 700mm
- electromechanical components: omron, weintek
- motor/ gear motor: tramec
- plc: omron	
- touch screen: weintek
all the parts are made in stainless steel and food grade materials.
electric plant: weintek touch-screen control console, 
with the possibility to memorize the line's settings and speeds.
the section is composed by:
section 'a'
1) n.1 dough extruder (3 cylinder)
2) n.3 flour duster
3) n.1 conveyor belt (multiroller -entry)
4) n.1 fat pump
5) n.1 sandwich folding system
6) n.1 satellite rollers
7) n.1 conveyor belt with folding
device
section 'b'
2) n.3 flour duster
3) n.1 conveyor belt (multiroller -entry)
6) n.1 satellite rollers
7) n.1 conveyor belt with folding device
section 'c'
2) n.2 flour duster
3) n.1 conveyor belt (multiroller -entry)
6) n.1 satellite rollers
line components description
pos. 1

dough extruder

(width of work: 600mm)

- 3 rolls extruder: n ° 2 uppers rollers grooved ø200mm, 
   n ° 1 lower roller thickness regulator with smooth profile ø200mm
- thickness can be change from 40mm to 7mm, adjustable by handwheel
- independent driving direct transmission with 2 motors from 0.37kw
- dough hopper with internal coating in ptfe and capacity of about 60dm3
- dough containment system isolated through pneumatic control walls
- machine mounted on wheels for quick cleaning
- stainless steel and food materials structure

pos. 2

flour duster
- standard flour duster for all types of conveyor belts
- width adjustable through side walls
- adjustable flour consumption
- independent driving with 0.18kw motor
- removable hopper with capacity of 10kg about

pos. 3
conveyor belt (satellite rollers-entry)
- 700mm width conveyor belt in polyurethane resin
- pulling system with integrated scrapers, powered by 0.37kw motor
- system completes of external scrapers
- optimized snap on system for fast cleaning
- stainless steel and food materials structure
delivery with commissioning and product run on request.
more info e.g. delivery time on request
 DOUGH LAMINATION LINE IN U SHAPE TECHNICAL SPECIFICATION: - TABLE PROFILE WIDTH: 770MM - CONVEYOR BELT WIDTH: 700MM - ELECTROMECHANICAL COMPONENTS: OMRON, WEINTEK - MOTOR/ GEAR MOTOR: TRAMEC - PLC: OMRON - TOUCH SCREEN: WEINTEK ALL THE PARTS ARE MADE IN STAINLESS STEEL AND FOOD GRADE MATERIALS. ELECTRIC PLANT: WEINTEK TOUCH-SCREEN CONTROL CONSOLE, WITH THE POSSIBILITY TO MEMORIZE THE LINE'S SETTINGS AND SPEEDS. THE SECTION IS COMPOSED BY: SECTION 'A' 1) N.1 DOUGH EXTRUDER (3 CYLINDER) 2) N.3 FLOUR DUSTER 3) N.1 CONVEYOR BELT (MULTIROLLER -ENTRY) 4) N.1 FAT PUMP 5) N.1 SANDWICH FOLDING SYSTEM 6) N.1 SATELLITE ROLLERS 7) N.1 CONVEYOR BELT WITH FOLDING DEVICE SECTION 'B' 2) N.3 FLOUR DUSTER 3) N.1 CONVEYOR BELT (MULTIROLLER -ENTRY) 6) N.1 SATELLITE ROLLERS 7) N.1 CONVEYOR BELT WITH FOLDING DEVICE SECTION 'C' 2) N.2 FLOUR DUSTER 3) N.1 CONVEYOR BELT (MULTIROLLER -ENTRY) 6) N.1 SATELLITE ROLLERS LINE COMPONENTS DESCRIPTION POS. 1 DOUGH EXTRUDER (WIDTH OF WORK: 600MM) - 3 ROLLS EXTRUDER: N ° 2 UPPERS ROLLERS GROOVED ø200MM, N ° 1 LOWER ROLLER THICKNESS REGULATOR WITH SMOOTH PROFILE ø200MM - THICKNESS CAN BE CHANGE FROM 40MM TO 7MM, ADJUSTABLE BY HANDWHEEL - INDEPENDENT DRIVING DIRECT TRANSMISSION WITH 2 MOTORS FROM 0.37KW - DOUGH HOPPER WITH INTERNAL COATING IN PTFE AND CAPACITY OF ABOUT 60DM3 - DOUGH CONTAINMENT SYSTEM ISOLATED THROUGH PNEUMATIC CONTROL WALLS - MACHINE MOUNTED ON WHEELS FOR QUICK CLEANING - STAINLESS STEEL AND FOOD MATERIALS STRUCTURE POS. 2 FLOUR DUSTER - STANDARD FLOUR DUSTER FOR ALL TYPES OF CONVEYOR BELTS - WIDTH ADJUSTABLE THROUGH SIDE WALLS - ADJUSTABLE FLOUR CONSUMPTION - INDEPENDENT DRIVING WITH 0.18KW MOTOR - REMOVABLE HOPPER WITH CAPACITY OF 10KG ABOUT POS. 3 CONVEYOR BELT (SATELLITE ROLLERS-ENTRY) - 700MM WIDTH CONVEYOR BELT IN POLYURETHANE RESIN - PULLING SYSTEM WITH INTEGRATED SCRAPERS, POWERED BY 0.37KW MOTOR - SYSTEM COMPLETES OF EXTERNAL SCRAPERS - OPTIMIZED SNAP ON SYSTEM FOR FAST CLEANING - STAINLESS STEEL AND FOOD MATERIALS STRUCTURE DELIVERY WITH COMMISSIONING AND PRODUCT RUN ON REQUEST. MORE INFO E.G. DELIVERY TIME ON REQUEST
Vendedor: bak-tec-Industries GmbH
Año de construcción: usado
Ubicación: Land-type um-44 e, no unknown manufacturingtag is missing, mounted on frame , cutter , material stainless steel , capacity 44 ltr, diameter 490 mm, depth 270 mm, with scraper (motor 0,75 kw, 220.380 volt -37 rpm), can be tilted , working pressure vacuum, with jacket , working pressure unknown, max. temperature unknown, motor , floorspace 1,3x1,1 m, total height 1,8 m, weight 400 kgcuttersgrinders > cutters what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! TYPE UM-44 E, NO UNKNOWN MANUFACTURINGTAG IS MISSING, MOUNTED ON FRAME , CUTTER , MATERIAL STAINLESS STEEL , CAPACITY 44 LTR, DIAMETER 490 MM, DEPTH 270 MM, WITH SCRAPER (MOTOR 0,75 KW, 220.380 VOLT -37 RPM), CAN BE TILTED , WORKING PRESSURE VACUUM, WITH JACKET , WORKING PRESSURE UNKNOWN, MAX. TEMPERATURE UNKNOWN, MOTOR , FLOORSPACE 1,3X1,1 M, TOTAL HEIGHT 1,8 M, WEIGHT 400 KGCUTTERSGRINDERS > CUTTERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-with planetary mixer, type: tpz 750
with automatic scraper, type: ths 15/14, linearly movable

technical data:
- capacity for hardened concrete, medium quality, continuous operation: ca. 20 m³/h
- capacity for hardened concrete with water dosing hygrometer: ca. 12 - 15 ³/h
- concrete dispensing height: 4,10 m
- number of dosing valves: 4
- number of dosing belts: 2 for light construction material
- number of silos for binder: 3 x 50 t
- dosing capacity of binder screws: 21 t/h
- weighing range of aggregate scale: 1500 kg
- weighing range of binder scale: 250 kg
- weighing range of additive scale: 5 kg
- drive power of mixer: 30 kw
- effective power of compressor with mu: 515 ltr./min., 10 bar
- capacity of compressors pressure vessel: 500 ltr.
- drive power of compressor with mu: 4 kw WITH PLANETARY MIXER, TYPE: TPZ 750 WITH AUTOMATIC SCRAPER, TYPE: THS 15/14, LINEARLY MOVABLE TECHNICAL DATA: - CAPACITY FOR HARDENED CONCRETE, MEDIUM QUALITY, CONTINUOUS OPERATION: CA. 20 M³/H - CAPACITY FOR HARDENED CONCRETE WITH WATER DOSING HYGROMETER: CA. 12 - 15 ³/H - CONCRETE DISPENSING HEIGHT: 4,10 M - NUMBER OF DOSING VALVES: 4 - NUMBER OF DOSING BELTS: 2 FOR LIGHT CONSTRUCTION MATERIAL - NUMBER OF SILOS FOR BINDER: 3 X 50 T - DOSING CAPACITY OF BINDER SCREWS: 21 T/H - WEIGHING RANGE OF AGGREGATE SCALE: 1500 KG - WEIGHING RANGE OF BINDER SCALE: 250 KG - WEIGHING RANGE OF ADDITIVE SCALE: 5 KG - DRIVE POWER OF MIXER: 30 KW - EFFECTIVE POWER OF COMPRESSOR WITH MU: 515 LTR./MIN., 10 BAR - CAPACITY OF COMPRESSORS PRESSURE VESSEL: 500 LTR. - DRIVE POWER OF COMPRESSOR WITH MU: 4 KW
Vendedor: I-V-W GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 29.900 €
Ubicación: Land-weight approx.: 3000 kg<br/>dimensions (l x w x h) approx.: 6260 x 950 x 1750 mm<br/>gluing unit: yes <br/>profile scraping unit: yes <br/>description: <h3>brandt, type ambition 1660 fc airtech</h3> - spread milling unit 2 x 2.2 kw, 200 hz<br> - glue aggregate<br> - cutting unit phase / right 2 x 0.35 kw<br> - milling unit 2 x 0.55 kw counterflow<br> - forming mill unit 4 x 0.3 kw wd 60<br> - profile scraping with quick change heads<br> - cleaning unit 2 engines<br> - electronic control power control pc20 + - extension walk-in ruler with 300 mm<br> - pu rolls instead of standard rolls 1600 - 1800<br> - interior lighting hood 3 lamps<br> - workpiece support shear version<br> - interface ligmatech zhr05 for 1600/1800<br> - motor height adjustment top pressure<br> - program relocation walk-in ruler<br> - program displacement pressure zone<br> - quickmelt application unit<br> - automatic edge insertion kdx 1210/1400<br> - automation package for machines with 1 milling unit<br> - pneumatic adjustment hoods phase / straight<br> - pneumatic adjustment of face milling<br> - program adjustment lateral feeler rollers<br> - pneumatic 2-point vertical vertical feeler roller<br> - pneumatic 2-point adjustment<br> - tool set r = 2 mm<br> - glue scrapers<br> - powertouch 2<br> - airtec - activation unit at 15<br> WEIGHT APPROX.: 3000 KG
DIMENSIONS (L X W X H) APPROX.: 6260 X 950 X 1750 MM
GLUING UNIT: YES
PROFILE SCRAPING UNIT: YES
DESCRIPTION:

BRANDT, TYPE AMBITION 1660 FC AIRTECH

- SPREAD MILLING UNIT 2 X 2.2 KW, 200 HZ
- GLUE AGGREGATE
- CUTTING UNIT PHASE / RIGHT 2 X 0.35 KW
- MILLING UNIT 2 X 0.55 KW COUNTERFLOW
- FORMING MILL UNIT 4 X 0.3 KW WD 60
- PROFILE SCRAPING WITH QUICK CHANGE HEADS
- CLEANING UNIT 2 ENGINES
- ELECTRONIC CONTROL POWER CONTROL PC20 + - EXTENSION WALK-IN RULER WITH 300 MM
- PU ROLLS INSTEAD OF STANDARD ROLLS 1600 - 1800
- INTERIOR LIGHTING HOOD 3 LAMPS
- WORKPIECE SUPPORT SHEAR VERSION
- INTERFACE LIGMATECH ZHR05 FOR 1600/1800
- MOTOR HEIGHT ADJUSTMENT TOP PRESSURE
- PROGRAM RELOCATION WALK-IN RULER
- PROGRAM DISPLACEMENT PRESSURE ZONE
- QUICKMELT APPLICATION UNIT
- AUTOMATIC EDGE INSERTION KDX 1210/1400
- AUTOMATION PACKAGE FOR MACHINES WITH 1 MILLING UNIT
- PNEUMATIC ADJUSTMENT HOODS PHASE / STRAIGHT
- PNEUMATIC ADJUSTMENT OF FACE MILLING
- PROGRAM ADJUSTMENT LATERAL FEELER ROLLERS
- PNEUMATIC 2-POINT VERTICAL VERTICAL FEELER ROLLER
- PNEUMATIC 2-POINT ADJUSTMENT
- TOOL SET R = 2 MM
- GLUE SCRAPERS
- POWERTOUCH 2
- AIRTEC - ACTIVATION UNIT AT 15
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land--thermal fluid
-double stack
-sediment scraper
-co2 equipment -THERMAL FLUID -DOUBLE STACK -SEDIMENT SCRAPER -CO2 EQUIPMENT
Vendedor: Europ-Equipement
Año de construcción: usado
Ubicación: Land-3 cylinders length 550 mm, cap. variable, moveable\r\ncylinder diameter 2 pcs. 200 mm, grooved\r\n                          1 pcs. 300 mm, smooth, include  scraper 3 CYLINDERS LENGTH 550 MM, CAP. VARIABLE, MOVEABLE\R\NCYLINDER DIAMETER 2 PCS. 200 MM, GROOVED\R\N 1 PCS. 300 MM, SMOOTH, INCLUDE SCRAPER
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land--electric power: 89 kw
-double stack
-sediment scraper
-mat teflon
-co2 equipment -ELECTRIC POWER: 89 KW -DOUBLE STACK -SEDIMENT SCRAPER -MAT TEFLON -CO2 EQUIPMENT
Vendedor: Europ-Equipement
Año de construcción: usado
Ubicación: Land-lifting cap.  800 kg, max tip-height 1900 mm\r\ntilting device in right hand design, 1 speed\r\nscraping device for automatic bowl emptying\r\n LIFTING CAP. 800 KG, MAX TIP-HEIGHT 1900 MM\R\NTILTING DEVICE IN RIGHT HAND DESIGN, 1 SPEED\R\NSCRAPING DEVICE FOR AUTOMATIC BOWL EMPTYING\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-fryer koppens brn 4500-600

-thermal fluid
-double stack
-sediment scraper
-mat teflon
-co2 equipment FRYER KOPPENS BRN 4500-600 -THERMAL FLUID -DOUBLE STACK -SEDIMENT SCRAPER -MAT TEFLON -CO2 EQUIPMENT
Vendedor: Europ-Equipement
Año de construcción: usado
Ubicación: Land-hook + bowl aluminium, contains approx. 120 l\r\nmotor for hook 27/22 kw, 380 v, 2930/1460 rpm.\r\nmotor for scraper  approx. 1,1 kw, 380 v, HOOK + BOWL ALUMINIUM, CONTAINS APPROX. 120 L\R\NMOTOR FOR HOOK 27/22 KW, 380 V, 2930/1460 RPM.\R\NMOTOR FOR SCRAPER APPROX. 1,1 KW, 380 V,
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-fryer meyn 600-5000 th

-thermal oil
-double stack
-sediment scraper FRYER MEYN 600-5000 TH -THERMAL OIL -DOUBLE STACK -SEDIMENT SCRAPER
Vendedor: Europ-Equipement
Año de construcción: usado
Ubicación: Land-make romabau/mirap, no 20129, new 1978, mounted on legs , reactor (1x), material stainless steel (1.4301), mirror polished inside, capacity 1443 ltr, vessel sizes dia. 1200x730mm, vessel insulated, dished bottom , dished top side , manhole dia. 225mm, outlet , working pressure vac/5 bar, test pressure 6,25 bar, half coil jacketed (48 ltr), working pressure 7 bar, test pressure 8,75 bar, max. temperature 135 degr. c., with propellor stirrer spiral stirrer (3x), motor 3,6 kw (ex), with anchor stirrer equipped with scrapers, motor 3,6 kw, 380 volt (ex), floorspace 1,6x1,6 m, total height 3,5 m, weight 1800 kgreactorsreactors > reactors what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE ROMABAU/MIRAP, NO 20129, NEW 1978, MOUNTED ON LEGS , REACTOR (1X), MATERIAL STAINLESS STEEL (1.4301), MIRROR POLISHED INSIDE, CAPACITY 1443 LTR, VESSEL SIZES DIA. 1200X730MM, VESSEL INSULATED, DISHED BOTTOM , DISHED TOP SIDE , MANHOLE DIA. 225MM, OUTLET , WORKING PRESSURE VAC/5 BAR, TEST PRESSURE 6,25 BAR, HALF COIL JACKETED (48 LTR), WORKING PRESSURE 7 BAR, TEST PRESSURE 8,75 BAR, MAX. TEMPERATURE 135 DEGR. C., WITH PROPELLOR STIRRER SPIRAL STIRRER (3X), MOTOR 3,6 KW (EX), WITH ANCHOR STIRRER EQUIPPED WITH SCRAPERS, MOTOR 3,6 KW, 380 VOLT (EX), FLOORSPACE 1,6X1,6 M, TOTAL HEIGHT 3,5 M, WEIGHT 1800 KGREACTORSREACTORS > REACTORS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-technical data:
-working height | 950 mm
-pneumatic connection | min. 6 bar
-total length | 4.770 mm

work piece and edge parameters:
-workpiece width min:
-at work-piece thickness 12-22 mm | 70 mm *.
-for panel thickness 23-40 mm | 120 mm *.
-at work-piece thickness 60-41 mm / 150 mm *.
* depending on the length of the workpiece
-workpiece overhang | 38 mm
-workpiece thickness. 8-60 mm
-edge height max. work piece height = | + 6 mm
-edge material role. 0.4-3 mm
-edge cross section max.
-for pvc. 135 mm â²
-for veneer | 100 mmâ²
-roll diameter max.        ⦠830 mm
-edge material strip | 0.4-8 mm
-edge cross section max.
-in strips. 360 mm â²
-if no radius is specified, is r = 2 mm
produced and delivered

overview of standard equipment:
gluing unit a8
end trimming unit chamfer/straight 2 x 0.18 kw
milling unit 2 x 0,55 kw counter running
contour trimming unit 1 x 0, 35 kw wd 40
profile scraper
schwabbelaggregat

amenities:
-feed variable 8-14 m / min - motor-driven height adjustment upper pressure
program adjustment compression zone
-quickmelt order unit
-automation package - 2 x multiple roles keying flush milling motor
-2 x special keying for scraper - glue joint scraper
-pu upper pressure rollers instead of rubber rollers
-interface electr. / mechan. zhr 01 /.
zhr 15
 TECHNICAL DATA: -WORKING HEIGHT | 950 MM -PNEUMATIC CONNECTION | MIN. 6 BAR -TOTAL LENGTH | 4.770 MM WORK PIECE AND EDGE PARAMETERS: -WORKPIECE WIDTH MIN: -AT WORK-PIECE THICKNESS 12-22 MM | 70 MM *. -FOR PANEL THICKNESS 23-40 MM | 120 MM *. -AT WORK-PIECE THICKNESS 60-41 MM / 150 MM *. * DEPENDING ON THE LENGTH OF THE WORKPIECE -WORKPIECE OVERHANG | 38 MM -WORKPIECE THICKNESS. 8-60 MM -EDGE HEIGHT MAX. WORK PIECE HEIGHT = | + 6 MM -EDGE MATERIAL ROLE. 0.4-3 MM -EDGE CROSS SECTION MAX. -FOR PVC. 135 MM &ACIRC;&SUP2; -FOR VENEER | 100 MM&ACIRC;&SUP2; -ROLL DIAMETER MAX. &ACIRC;&BRVBAR; 830 MM -EDGE MATERIAL STRIP | 0.4-8 MM -EDGE CROSS SECTION MAX. -IN STRIPS. 360 MM &ACIRC;&SUP2; -IF NO RADIUS IS SPECIFIED, IS R = 2 MM PRODUCED AND DELIVERED OVERVIEW OF STANDARD EQUIPMENT: GLUING UNIT A8 END TRIMMING UNIT CHAMFER/STRAIGHT 2 X 0.18 KW MILLING UNIT 2 X 0,55 KW COUNTER RUNNING CONTOUR TRIMMING UNIT 1 X 0, 35 KW WD 40 PROFILE SCRAPER SCHWABBELAGGREGAT AMENITIES: -FEED VARIABLE 8-14 M / MIN - MOTOR-DRIVEN HEIGHT ADJUSTMENT UPPER PRESSURE PROGRAM ADJUSTMENT COMPRESSION ZONE -QUICKMELT ORDER UNIT -AUTOMATION PACKAGE - 2 X MULTIPLE ROLES KEYING FLUSH MILLING MOTOR -2 X SPECIAL KEYING FOR SCRAPER - GLUE JOINT SCRAPER -PU UPPER PRESSURE ROLLERS INSTEAD OF RUBBER ROLLERS -INTERFACE ELECTR. / MECHAN. ZHR 01 /. ZHR 15
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 13.500 €
Ubicación: Land-serial number: 0-261-02-1540 <br/>weight approx.: 4000 kg<br/>dimensions (l x w x h) approx.: 9000 x2400x 2400 mm<br/>feed: 11-20 m/min<br/>edge thickness: 0,4 - 12 mm<br/>workpiece thickness: 8 - 60  mm<br/>joint trimming unit: ja  <br/>gluing unit: quickmelt <br/>snipping unit: hl 6210  2 x 0,35 kw <br/>rough trimming unit: bf 6230 2 x 0,55kw <br/>fine trimming unit: bf 6335 2x0,55 kw <br/>profile trimming unit: ff 6240 ( 4 motore 0,3 kw) <br/>universal trimming unit: nf3400 nut einheit/grooving unit 1,85kw <br/>flat scraping unit: zf 6600 <br/>profile scraping unit: zk 6510 <br/>total power approx: 18,5 kw<br/>edge magazine with: 1 -fold roller<br/>description: powerful brandt profiline kdn ( kdf) 780 edgebander<br> <br> the machine was later equipped with the joint trimming unit<br> - infeed fence adjustable by programm control<br> - pressure zone adjustable by programm control<br> - quickmelt gluing unit<br> - edge thickness adjustable by programm control<br> - automatic edge-feed<br> - pneumatic adjustment of snipping unit chamfer/straight<br> <br> 1st trimming unit equipped with<br>  , ,pneumatic 2-spot adjustment of vertical sensing rolls<br>  , ,pneumatic axial adjustment<br> <br> 2nd trimming unit equipped with<br>  , ,nc servo motor positioning for different edge<br>  , ,thickness and profiles<br> <br> grooving unit 1,84 kw with:<br>  , ,pneumatic set-in and out ( no intermittent control )<br>  , ,height adjustment by a motor driven axis<br> <br> profile scraper unit with:<br> pneumatic addjustment ( in/out)<br> <br> -interface for return conveying system<br> <br> - ligmatech return conveying system zhr 15.<br> function & specifications:<br> after panels have been edgebanded, they are automatically lifted upwards by a unique scissors action, transferred to a top feeder unit, which feeds the panels onto a gravity roller track for return to operator, crosswise fed panels are automatically rotated for lengthwis SERIAL NUMBER: 0-261-02-1540
WEIGHT APPROX.: 4000 KG
DIMENSIONS (L X W X H) APPROX.: 9000 X2400X 2400 MM
FEED: 11-20 M/MIN
EDGE THICKNESS: 0,4 - 12 MM
WORKPIECE THICKNESS: 8 - 60 MM
JOINT TRIMMING UNIT: JA
GLUING UNIT: QUICKMELT
SNIPPING UNIT: HL 6210 2 X 0,35 KW
ROUGH TRIMMING UNIT: BF 6230 2 X 0,55KW
FINE TRIMMING UNIT: BF 6335 2X0,55 KW
PROFILE TRIMMING UNIT: FF 6240 ( 4 MOTORE 0,3 KW)
UNIVERSAL TRIMMING UNIT: NF3400 NUT EINHEIT/GROOVING UNIT 1,85KW
FLAT SCRAPING UNIT: ZF 6600
PROFILE SCRAPING UNIT: ZK 6510
TOTAL POWER APPROX: 18,5 KW
EDGE MAGAZINE WITH: 1 -FOLD ROLLER
DESCRIPTION: POWERFUL BRANDT PROFILINE KDN ( KDF) 780 EDGEBANDER

THE MACHINE WAS LATER EQUIPPED WITH THE JOINT TRIMMING UNIT
- INFEED FENCE ADJUSTABLE BY PROGRAMM CONTROL
- PRESSURE ZONE ADJUSTABLE BY PROGRAMM CONTROL
- QUICKMELT GLUING UNIT
- EDGE THICKNESS ADJUSTABLE BY PROGRAMM CONTROL
- AUTOMATIC EDGE-FEED
- PNEUMATIC ADJUSTMENT OF SNIPPING UNIT CHAMFER/STRAIGHT

1ST TRIMMING UNIT EQUIPPED WITH
&NBSP,&NBSP,PNEUMATIC 2-SPOT ADJUSTMENT OF VERTICAL SENSING ROLLS
&NBSP,&NBSP,PNEUMATIC AXIAL ADJUSTMENT

2ND TRIMMING UNIT EQUIPPED WITH
&NBSP,&NBSP,NC SERVO MOTOR POSITIONING FOR DIFFERENT EDGE
&NBSP,&NBSP,THICKNESS AND PROFILES

GROOVING UNIT 1,84 KW WITH:
&NBSP,&NBSP,PNEUMATIC SET-IN AND OUT ( NO INTERMITTENT CONTROL )
&NBSP,&NBSP,HEIGHT ADJUSTMENT BY A MOTOR DRIVEN AXIS

PROFILE SCRAPER UNIT WITH:
PNEUMATIC ADDJUSTMENT ( IN/OUT)

-INTERFACE FOR RETURN CONVEYING SYSTEM

- LIGMATECH RETURN CONVEYING SYSTEM ZHR 15.
FUNCTION & SPECIFICATIONS:
AFTER PANELS HAVE BEEN EDGEBANDED, THEY ARE AUTOMATICALLY LIFTED UPWARDS BY A UNIQUE SCISSORS ACTION, TRANSFERRED TO A TOP FEEDER UNIT, WHICH FEEDS THE PANELS ONTO A GRAVITY ROLLER TRACK FOR RETURN TO OPERATOR, CROSSWISE FED PANELS ARE AUTOMATICALLY ROTATED FOR LENGTHWIS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-overview of aggregate loading:
-release agent spraying unit
-trimming unit
-gluing part a20 with 2 wheels
-trimming unit hl84
-milling unit
-contour trimming unit fk11 manual
-profile scraper pn10
-finish unit

1 base machine:
-feed ⦠18 - 25 m / min
-feed up with fk11 ⦠20 m / min
-working height ⦠950 mm
-pneumatic connection ⦠7-8 bar
-total length ⦠7755 mm

2. workpiece and kantenparmeter:
-workpiece width min:
-at work-piece thickness 12-22 mm ⦠60 mm *.
-for panel thickness 23-40 mm ⦠105 mm *.
* depending on the length of the workpiece
-workpiece overhang ⦠30 mm
-workpiece thickness ⦠12-40 mm
(workpiece thickness optional) ⦠8-60 mm
-edge material role ⦠0.3-3 mm
-edge cross section max: â¦
-for pvc ⦠135 mm â²
-for veneer ⦠100 mmâ²
-roll diameter max. ⦠830 mm
-edge material strip ⦠0.4-20 mm
-edge cross section max: â¦
-in strip ⦠900 mmâ²

3. aggregate loading:

3.1 release agent spraying unit top/bottom:

3.2 trimming unit:
-2 motors 3 kw, 150 hz., 9000 rpm
-electro-pneumatic control of both motors

3.3 a20 gluing unit with 2 roles:
consisting of:
workpiece preheating
quickmelt order unit
quick clamping system
magazine 2 roles manually
pressure zone c.

3.4 caps unit chamfer/straight hl84/0.8 kw:
-2 motors per 0.8 kw, 200 hz., 12000 rpm
-engines manually swiveling the chamfer caps

3.5 preliminary milling unit 1.5 kw:
-2 motors one above the other with x 1,5 kw, 200 hz.
and, 12000 1/min
-height with the upper pressure
-working in the opposite direction
-swivel range +/-1 degree

3.6 form milling aggregate fk 11 manual

i - change head kit manually adjustable
-2 exchange heads
-for manual adjustment on the different
edge thicknesses for chamfer milling or the
manual setup of chamfer milling on
radius milling
-maximum thickness of edges of chamfer radius tool:
-r 1.5 = 0.6 mm
-r 2.0 = 0.8 mm
-if r 3.0 = 1.0 mm
-chamfer angle 15 degrees

3.7 profile scraper pn10:
-to the chamfering or rounding of machined
pvc edge

3.8 finishaggregat, consisting of:
-glue joint scraper
-schwabbelaggregat

4. power control pc 22:

other accessories

carriage
folding for the rectangular insertion of workpieces at unilateral editing.
workpiece dimension 500 x 1600 mm

workpiece thickness 60 mm site. 40 mm
-preparation of the base machine and all
units up to the fã¼geaggregat! 
for workpiece thickness 60 mm
at reduced speed
up to 20 m / min.

workpiece thickness 8 mm
-preparation of the basic machine for
workpiece thickness of min. 8 mm instead of 12 mm
-only longitudinal processing without copying it corners
and possible without profile scraper
only for workpieces without top layer projection.

automation package chamfer/radius
-automatic adjustment infeed fence
-automatic adjustment of compression zone
-pneumatic adjustment of straigt on
straight line caps
-pneumatic adjustment of the cap motors
to flush - or ã?bestandskappen
-pneumatic adjustment before milling unit
to flush - or excess of jurisdiction milling
-automatic adjustment of straigt on
radius milling shape milling
-pneumatic adjustment pn10 and fa11
to the side driving away from the
workspace
-electronic height adjustment

workpiece management for fk device
with additional clamping workpiece length
min. 120 mm 
 OVERVIEW OF AGGREGATE LOADING: -RELEASE AGENT SPRAYING UNIT -TRIMMING UNIT -GLUING PART A20 WITH 2 WHEELS -TRIMMING UNIT HL84 -MILLING UNIT -CONTOUR TRIMMING UNIT FK11 MANUAL -PROFILE SCRAPER PN10 -FINISH UNIT 1 BASE MACHINE: -FEED &ACIRC;&BRVBAR; 18 - 25 M / MIN -FEED UP WITH FK11 &ACIRC;&BRVBAR; 20 M / MIN -WORKING HEIGHT &ACIRC;&BRVBAR; 950 MM -PNEUMATIC CONNECTION &ACIRC;&BRVBAR; 7-8 BAR -TOTAL LENGTH &ACIRC;&BRVBAR; 7755 MM 2. WORKPIECE AND KANTENPARMETER: -WORKPIECE WIDTH MIN: -AT WORK-PIECE THICKNESS 12-22 MM &ACIRC;&BRVBAR; 60 MM *. -FOR PANEL THICKNESS 23-40 MM &ACIRC;&BRVBAR; 105 MM *. * DEPENDING ON THE LENGTH OF THE WORKPIECE -WORKPIECE OVERHANG &ACIRC;&BRVBAR; 30 MM -WORKPIECE THICKNESS &ACIRC;&BRVBAR; 12-40 MM (WORKPIECE THICKNESS OPTIONAL) &ACIRC;&BRVBAR; 8-60 MM -EDGE MATERIAL ROLE &ACIRC;&BRVBAR; 0.3-3 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -FOR PVC &ACIRC;&BRVBAR; 135 MM &ACIRC;&SUP2; -FOR VENEER &ACIRC;&BRVBAR; 100 MM&ACIRC;&SUP2; -ROLL DIAMETER MAX. &ACIRC;&BRVBAR; 830 MM -EDGE MATERIAL STRIP &ACIRC;&BRVBAR; 0.4-20 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -IN STRIP &ACIRC;&BRVBAR; 900 MM&ACIRC;&SUP2; 3. AGGREGATE LOADING: 3.1 RELEASE AGENT SPRAYING UNIT TOP/BOTTOM: 3.2 TRIMMING UNIT: -2 MOTORS 3 KW, 150 HZ., 9000 RPM -ELECTRO-PNEUMATIC CONTROL OF BOTH MOTORS 3.3 A20 GLUING UNIT WITH 2 ROLES: CONSISTING OF: WORKPIECE PREHEATING QUICKMELT ORDER UNIT QUICK CLAMPING SYSTEM MAGAZINE 2 ROLES MANUALLY PRESSURE ZONE C. 3.4 CAPS UNIT CHAMFER/STRAIGHT HL84/0.8 KW: -2 MOTORS PER 0.8 KW, 200 HZ., 12000 RPM -ENGINES MANUALLY SWIVELING THE CHAMFER CAPS 3.5 PRELIMINARY MILLING UNIT 1.5 KW: -2 MOTORS ONE ABOVE THE OTHER WITH X 1,5 KW, 200 HZ. AND, 12000 1/MIN -HEIGHT WITH THE UPPER PRESSURE -WORKING IN THE OPPOSITE DIRECTION -SWIVEL RANGE +/-1 DEGREE 3.6 FORM MILLING AGGREGATE FK 11 MANUAL I - CHANGE HEAD KIT MANUALLY ADJUSTABLE -2 EXCHANGE HEADS -FOR MANUAL ADJUSTMENT ON THE DIFFERENT EDGE THICKNESSES FOR CHAMFER MILLING OR THE MANUAL SETUP OF CHAMFER MILLING ON RADIUS MILLING -MAXIMUM THICKNESS OF EDGES OF CHAMFER RADIUS TOOL: -R 1.5 = 0.6 MM -R 2.0 = 0.8 MM -IF R 3.0 = 1.0 MM -CHAMFER ANGLE 15 DEGREES 3.7 PROFILE SCRAPER PN10: -TO THE CHAMFERING OR ROUNDING OF MACHINED PVC EDGE 3.8 FINISHAGGREGAT, CONSISTING OF: -GLUE JOINT SCRAPER -SCHWABBELAGGREGAT 4. POWER CONTROL PC 22: OTHER ACCESSORIES CARRIAGE FOLDING FOR THE RECTANGULAR INSERTION OF WORKPIECES AT UNILATERAL EDITING. WORKPIECE DIMENSION 500 X 1600 MM WORKPIECE THICKNESS 60 MM SITE. 40 MM -PREPARATION OF THE BASE MACHINE AND ALL UNITS UP TO THE F&ATILDE;&FRAC14;GEAGGREGAT! FOR WORKPIECE THICKNESS 60 MM AT REDUCED SPEED UP TO 20 M / MIN. WORKPIECE THICKNESS 8 MM -PREPARATION OF THE BASIC MACHINE FOR WORKPIECE THICKNESS OF MIN. 8 MM INSTEAD OF 12 MM -ONLY LONGITUDINAL PROCESSING WITHOUT COPYING IT CORNERS AND POSSIBLE WITHOUT PROFILE SCRAPER ONLY FOR WORKPIECES WITHOUT TOP LAYER PROJECTION. AUTOMATION PACKAGE CHAMFER/RADIUS -AUTOMATIC ADJUSTMENT INFEED FENCE -AUTOMATIC ADJUSTMENT OF COMPRESSION ZONE -PNEUMATIC ADJUSTMENT OF STRAIGT ON STRAIGHT LINE CAPS -PNEUMATIC ADJUSTMENT OF THE CAP MOTORS TO FLUSH - OR &ATILDE;?BESTANDSKAPPEN -PNEUMATIC ADJUSTMENT BEFORE MILLING UNIT TO FLUSH - OR EXCESS OF JURISDICTION MILLING -AUTOMATIC ADJUSTMENT OF STRAIGT ON RADIUS MILLING SHAPE MILLING -PNEUMATIC ADJUSTMENT PN10 AND FA11 TO THE SIDE DRIVING AWAY FROM THE WORKSPACE -ELECTRONIC HEIGHT ADJUSTMENT WORKPIECE MANAGEMENT FOR FK DEVICE WITH ADDITIONAL CLAMPING WORKPIECE LENGTH MIN. 120 MM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: 1.000 €
Ubicación: Land-id-nr. 1-056-11-0400 ID-NR. 1-056-11-0400
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-facilities:
-patronenkleberauftrassystem
-trimming unit
-milling unit
-radius scraper
-buffing unit
 FACILITIES: -PATRONENKLEBERAUFTRASSYSTEM -TRIMMING UNIT -MILLING UNIT -RADIUS SCRAPER -BUFFING UNIT
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-technical specification:  <br/>- working length:    250 mm<br/>- plate thickness (max.):      1 mm<br/><br/><br/><br/><br/> TECHNICAL SPECIFICATION:
- WORKING LENGTH: 250 MM
- PLATE THICKNESS (MAX.): 1 MM




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-facilities:
-quick change of gluing unit for hot melt adhesive
-auto. edge magazine with rolling plate
-reinforced before caps shear - compression zone with pneum. pre-charged pressure roller and 2 free reproduction wheels
-power control pc 20 + control
-adjustable infeed fence
-trimming unit 2 x 2.2 kw
-pneum.. adjustment caps, scraper, program adjustment page key roles and pneum. 2-point adjustment vertical key roles
-trimming unit 2 x 0.18 kw
-milling unit 2 x 0,55 kw
-formffrã¤saggregat 1 x 0.35 kw
-scraping unit for pvc edgebanding
-surface scraping glue joint
-buffing unit

technical data
edge thickness 0.4-8 mm
roll away 3 x 45 mm
or 0.8 x 65 mm
workpiece thickness 8-60 mm
feed max approx. 11 m / min.
electric 400 v - 3 ph - 50 hz.
connected load approx. 10,5 kw
pneumatic connection 6bar
total length 4.780 mm FACILITIES: -QUICK CHANGE OF GLUING UNIT FOR HOT MELT ADHESIVE -AUTO. EDGE MAGAZINE WITH ROLLING PLATE -REINFORCED BEFORE CAPS SHEAR - COMPRESSION ZONE WITH PNEUM. PRE-CHARGED PRESSURE ROLLER AND 2 FREE REPRODUCTION WHEELS -POWER CONTROL PC 20 + CONTROL -ADJUSTABLE INFEED FENCE -TRIMMING UNIT 2 X 2.2 KW -PNEUM.. ADJUSTMENT CAPS, SCRAPER, PROGRAM ADJUSTMENT PAGE KEY ROLES AND PNEUM. 2-POINT ADJUSTMENT VERTICAL KEY ROLES -TRIMMING UNIT 2 X 0.18 KW -MILLING UNIT 2 X 0,55 KW -FORMFFR&ATILDE;&CURREN;SAGGREGAT 1 X 0.35 KW -SCRAPING UNIT FOR PVC EDGEBANDING -SURFACE SCRAPING GLUE JOINT -BUFFING UNIT TECHNICAL DATA EDGE THICKNESS 0.4-8 MM ROLL AWAY 3 X 45 MM OR 0.8 X 65 MM WORKPIECE THICKNESS 8-60 MM FEED MAX APPROX. 11 M / MIN. ELECTRIC 400 V - 3 PH - 50 HZ. CONNECTED LOAD APPROX. 10,5 KW PNEUMATIC CONNECTION 6BAR TOTAL LENGTH 4.780 MM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 2.700 €
Ubicación: Land-weight approx.: 1200 kg<br/>dimensions (l x w x h) approx.: 3500 x 1200 x 1800 mm<br/>feed: 11 m/min<br/>edge thickness: 0,4-3 mm<br/>workpiece thickness: 8-50 mm<br/>gluing unit: ja / yes <br/>snipping unit: ja / yes <br/>fine trimming unit: ja / yes <br/>flat scraping unit: ja / yes <br/>description: biesse artech lato 23s edgebander WEIGHT APPROX.: 1200 KG
DIMENSIONS (L X W X H) APPROX.: 3500 X 1200 X 1800 MM
FEED: 11 M/MIN
EDGE THICKNESS: 0,4-3 MM
WORKPIECE THICKNESS: 8-50 MM
GLUING UNIT: JA / YES
SNIPPING UNIT: JA / YES
FINE TRIMMING UNIT: JA / YES
FLAT SCRAPING UNIT: JA / YES
DESCRIPTION: BIESSE ARTECH LATO 23S EDGEBANDER
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-overview of aggregate loading:
-release agent spraying unit
-trimming unit
-gluing part a20 with 2 wheels
-trimming unit hl84
-milling unit
-contour trimming unit fk 11 manual
-profile scraper pn10
-profile scraper pn10
-finish unit

1 base machine:
-feed ⦠18 - 25 m / min
-feed up with fk13 ⦠20 m / min
-working height ⦠950 mm
-pneumatic connection ⦠7-8 bar
-total length ⦠8545 mm

2. workpiece and kantenparmeter:
-workpiece width min:
-at work-piece thickness 12-22 mm ⦠60 mm *.
-for panel thickness 23-40 mm ⦠105 mm *.
* depending on the length of the workpiece
-workpiece overhang ⦠30 mm
-workpiece thickness ⦠12-40 mm
(workpiece thickness optional) ⦠8-60 mm
-edge material role ⦠0.3-3 mm
-edge cross section max: â¦
-for pvc ⦠135 mm â²
-for veneer ⦠100 mmâ²
-roll diameter max. ⦠830 mm
-edge material strip ⦠0.4-20 mm
-edge cross section max: â¦
-in strip ⦠900 mmâ²

3. aggregate loading:

3.1 release agent spraying unit top/bottom

3.2 trimming unit:
-2 motors 3 kw, 150 hz., 9000 rpm
-electro-pneumatic control of both motors

3.3 a20 gluing unit with 2 roles:
consisting of:
workpiece preheating
quickmelt order unit
quick clamping system
magazine 2 roles manually
pressure zone c.
-order unit with fine fluting-

3.4 caps unit chamfer/straight hl84/0.8 kw:
-2 motors per 0.8 kw, 200 hz., 12000 rpm
-engines manually swiveling the chamfer caps

3.5 preliminary milling unit 1.5 kw:
-2 motors one above the other with x 1,5 kw, 200 hz.
and, 12000 1/min
-height with the upper pressure
-working in the opposite direction
-swivel range +/-1 degree

3.6 form milling aggregate fk 11 manual
the following tools was included with delivery:
-i change head set, autom. adjustable - i india radius cutter set for fk r = 2 mm 3.7 profile scraper pn10:
-to the chamfering or rounding of machined
pvc edges, with quick change heads

3.8 profile scraper pn10:
-to the chamfering or rounding of machined
pvc edges, with quick change heads

3.9 finishaggregat, consisting of:
-glue joint scraper
-schwabbelaggregat

4. power control pc 22:

change:
-customized exhaust hoods, so that higher edge overhangs can be driven. example: 25mm 16 mm panel thickness edge height (or 23 mm / 33 mm)

other accessories

workpiece thickness 60 mm site. 40 mm
-preparation of the base machine and all
units up to the fã¼geaggregat! 
for workpiece thickness 60 mm
at reduced speed
up to 20 m / min.

workpiece thickness 8 mm
-preparation of the basic machine for
workpiece thickness of min. 8 mm instead of 12 mm
-only longitudinal processing without copying it corners
and possible without profile scraper
only for workpieces without top layer projection.

workpiece support in scissor design
-with roll coating, max. 1000 mm extendable

remote control for ambition

automation package chamfer/radius
-automatic adjustment infeed fence
-automatic adjustment of compression zone
-pneumatic adjustment before milling unit to flush - or excess of jurisdiction milling
-multi scraper mn21 automatically instead of
2xpn10, to automatically convert different radius or chamfer
-electronic height adjustment

detergent spray unit top/bottom
 OVERVIEW OF AGGREGATE LOADING: -RELEASE AGENT SPRAYING UNIT -TRIMMING UNIT -GLUING PART A20 WITH 2 WHEELS -TRIMMING UNIT HL84 -MILLING UNIT -CONTOUR TRIMMING UNIT FK 11 MANUAL -PROFILE SCRAPER PN10 -PROFILE SCRAPER PN10 -FINISH UNIT 1 BASE MACHINE: -FEED &ACIRC;&BRVBAR; 18 - 25 M / MIN -FEED UP WITH FK13 &ACIRC;&BRVBAR; 20 M / MIN -WORKING HEIGHT &ACIRC;&BRVBAR; 950 MM -PNEUMATIC CONNECTION &ACIRC;&BRVBAR; 7-8 BAR -TOTAL LENGTH &ACIRC;&BRVBAR; 8545 MM 2. WORKPIECE AND KANTENPARMETER: -WORKPIECE WIDTH MIN: -AT WORK-PIECE THICKNESS 12-22 MM &ACIRC;&BRVBAR; 60 MM *. -FOR PANEL THICKNESS 23-40 MM &ACIRC;&BRVBAR; 105 MM *. * DEPENDING ON THE LENGTH OF THE WORKPIECE -WORKPIECE OVERHANG &ACIRC;&BRVBAR; 30 MM -WORKPIECE THICKNESS &ACIRC;&BRVBAR; 12-40 MM (WORKPIECE THICKNESS OPTIONAL) &ACIRC;&BRVBAR; 8-60 MM -EDGE MATERIAL ROLE &ACIRC;&BRVBAR; 0.3-3 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -FOR PVC &ACIRC;&BRVBAR; 135 MM &ACIRC;&SUP2; -FOR VENEER &ACIRC;&BRVBAR; 100 MM&ACIRC;&SUP2; -ROLL DIAMETER MAX. &ACIRC;&BRVBAR; 830 MM -EDGE MATERIAL STRIP &ACIRC;&BRVBAR; 0.4-20 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -IN STRIP &ACIRC;&BRVBAR; 900 MM&ACIRC;&SUP2; 3. AGGREGATE LOADING: 3.1 RELEASE AGENT SPRAYING UNIT TOP/BOTTOM 3.2 TRIMMING UNIT: -2 MOTORS 3 KW, 150 HZ., 9000 RPM -ELECTRO-PNEUMATIC CONTROL OF BOTH MOTORS 3.3 A20 GLUING UNIT WITH 2 ROLES: CONSISTING OF: WORKPIECE PREHEATING QUICKMELT ORDER UNIT QUICK CLAMPING SYSTEM MAGAZINE 2 ROLES MANUALLY PRESSURE ZONE C. -ORDER UNIT WITH FINE FLUTING- 3.4 CAPS UNIT CHAMFER/STRAIGHT HL84/0.8 KW: -2 MOTORS PER 0.8 KW, 200 HZ., 12000 RPM -ENGINES MANUALLY SWIVELING THE CHAMFER CAPS 3.5 PRELIMINARY MILLING UNIT 1.5 KW: -2 MOTORS ONE ABOVE THE OTHER WITH X 1,5 KW, 200 HZ. AND, 12000 1/MIN -HEIGHT WITH THE UPPER PRESSURE -WORKING IN THE OPPOSITE DIRECTION -SWIVEL RANGE +/-1 DEGREE 3.6 FORM MILLING AGGREGATE FK 11 MANUAL THE FOLLOWING TOOLS WAS INCLUDED WITH DELIVERY: -I CHANGE HEAD SET, AUTOM. ADJUSTABLE - I INDIA RADIUS CUTTER SET FOR FK R = 2 MM 3.7 PROFILE SCRAPER PN10: -TO THE CHAMFERING OR ROUNDING OF MACHINED PVC EDGES, WITH QUICK CHANGE HEADS 3.8 PROFILE SCRAPER PN10: -TO THE CHAMFERING OR ROUNDING OF MACHINED PVC EDGES, WITH QUICK CHANGE HEADS 3.9 FINISHAGGREGAT, CONSISTING OF: -GLUE JOINT SCRAPER -SCHWABBELAGGREGAT 4. POWER CONTROL PC 22: CHANGE: -CUSTOMIZED EXHAUST HOODS, SO THAT HIGHER EDGE OVERHANGS CAN BE DRIVEN. EXAMPLE: 25MM 16 MM PANEL THICKNESS EDGE HEIGHT (OR 23 MM / 33 MM) OTHER ACCESSORIES WORKPIECE THICKNESS 60 MM SITE. 40 MM -PREPARATION OF THE BASE MACHINE AND ALL UNITS UP TO THE F&ATILDE;&FRAC14;GEAGGREGAT! FOR WORKPIECE THICKNESS 60 MM AT REDUCED SPEED UP TO 20 M / MIN. WORKPIECE THICKNESS 8 MM -PREPARATION OF THE BASIC MACHINE FOR WORKPIECE THICKNESS OF MIN. 8 MM INSTEAD OF 12 MM -ONLY LONGITUDINAL PROCESSING WITHOUT COPYING IT CORNERS AND POSSIBLE WITHOUT PROFILE SCRAPER ONLY FOR WORKPIECES WITHOUT TOP LAYER PROJECTION. WORKPIECE SUPPORT IN SCISSOR DESIGN -WITH ROLL COATING, MAX. 1000 MM EXTENDABLE REMOTE CONTROL FOR AMBITION AUTOMATION PACKAGE CHAMFER/RADIUS -AUTOMATIC ADJUSTMENT INFEED FENCE -AUTOMATIC ADJUSTMENT OF COMPRESSION ZONE -PNEUMATIC ADJUSTMENT BEFORE MILLING UNIT TO FLUSH - OR EXCESS OF JURISDICTION MILLING -MULTI SCRAPER MN21 AUTOMATICALLY INSTEAD OF 2XPN10, TO AUTOMATICALLY CONVERT DIFFERENT RADIUS OR CHAMFER -ELECTRONIC HEIGHT ADJUSTMENT DETERGENT SPRAY UNIT TOP/BOTTOM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 9.500 €
Ubicación: Land-serial number: 0-261-06-4384 <br/>weight approx.: 2000 kg<br/>control: pc 16 <br/>dimensions (l x w x h) approx.: 4800 x 900 x 1750 mm<br/>feed: 11 m/min<br/>edge thickness: 0,4 - 8 mm<br/>workpiece thickness: 8 - 60 mm<br/>joint trimming unit: 2 x 2,2 kw <br/>gluing unit: ja / yes <br/>snipping unit: 2 x 0,18 kw <br/>rough trimming unit: 2 x 0,55 kw <br/>profile trimming unit: 1 x 0,35 kw <br/>profile scraping unit: ja / yes <br/>edge buffing unit: ja / yes <br/>edge magazine with: 1 -fold roller<br/>description:  -serial number: 0-261-06-4384 -edge thickness: 0.4 - 8mm -work piece thickness: 8 - 60 mm -feed: 11 m7min -flat milling unit: 2 x 2,2 kw, 12000 rpm -glue unit: yes -edge magazine with: roll and fixed length magazine 1-fold roll -snipping unit: 2 x 0.18 kw, 12000 rpm, pneumatically controlled 0-15 ° -milling unit: 2 x 0.55 kw, 2mm -form milling unit: 1 x 0.35 kw, 2mm -profile scraper: yes, pneumatically controlled -buffing unit: yes control: power control pc 16 SERIAL NUMBER: 0-261-06-4384
WEIGHT APPROX.: 2000 KG
CONTROL: PC 16
DIMENSIONS (L X W X H) APPROX.: 4800 X 900 X 1750 MM
FEED: 11 M/MIN
EDGE THICKNESS: 0,4 - 8 MM
WORKPIECE THICKNESS: 8 - 60 MM
JOINT TRIMMING UNIT: 2 X 2,2 KW
GLUING UNIT: JA / YES
SNIPPING UNIT: 2 X 0,18 KW
ROUGH TRIMMING UNIT: 2 X 0,55 KW
PROFILE TRIMMING UNIT: 1 X 0,35 KW
PROFILE SCRAPING UNIT: JA / YES
EDGE BUFFING UNIT: JA / YES
EDGE MAGAZINE WITH: 1 -FOLD ROLLER
DESCRIPTION: -SERIAL NUMBER: 0-261-06-4384 -EDGE THICKNESS: 0.4 - 8MM -WORK PIECE THICKNESS: 8 - 60 MM -FEED: 11 M7MIN -FLAT MILLING UNIT: 2 X 2,2 KW, 12000 RPM -GLUE UNIT: YES -EDGE MAGAZINE WITH: ROLL AND FIXED LENGTH MAGAZINE 1-FOLD ROLL -SNIPPING UNIT: 2 X 0.18 KW, 12000 RPM, PNEUMATICALLY CONTROLLED 0-15 ° -MILLING UNIT: 2 X 0.55 KW, 2MM -FORM MILLING UNIT: 1 X 0.35 KW, 2MM -PROFILE SCRAPER: YES, PNEUMATICALLY CONTROLLED -BUFFING UNIT: YES CONTROL: POWER CONTROL PC 16
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-overview of the unit assembly:-trimming unit 2 x 2.2 kw
-gluing unit a8
-trimming unit chamfer / straight 2 x 0.18 kw
-pneum.. adjustment caps chamfer/straight
-milling unit 2 x 0,55 kw 0 â°
-pneum.. 2-point adjustment - multifunction-contour trimming unit 2 x 0,4 kw - profile scraper with quick change heads - pneum. adjustment scraper - glue joint scraper
-buffing unit

facilities
-motorized adjustable infeed fence. extended to 300 mm
-automatic edge feeder
-motorized height adjustment
-pneum.. controlled entry lock
-workpiece support up to 600 mm telescopic
-control powercontrol pc 20 +.

technical data
-workpiece width min: - at work-piece thickness 8-22 mm 70 mm * - for panel thickness 23-40 mm 120 mm * - workpiece thickness 41-60 mm 150 mm * * depending on the length of workpiece - workpiece overhang 38 mm - thickness 8-60 mm - edge height max. = workpiece height + 6 mm - edge material  roll 0.4-3 mm - edge cross section max. 
-for pvc 135 mm 2 - for veneer 100 mmâ² - roll diameter of maximum 830 mm - edge material strip 0.4-8 mm - edge cross section max. 
-in strip 360 mmâ² - feed 8 - 14 m/min - feed max form milling machine 14 m/min - working height 950 mm - min. 6 bar - pneumatic connection total length 5.270 mm 
 OVERVIEW OF THE UNIT ASSEMBLY:-TRIMMING UNIT 2 X 2.2 KW -GLUING UNIT A8 -TRIMMING UNIT CHAMFER / STRAIGHT 2 X 0.18 KW -PNEUM.. ADJUSTMENT CAPS CHAMFER/STRAIGHT -MILLING UNIT 2 X 0,55 KW 0 &ACIRC;&DEG; -PNEUM.. 2-POINT ADJUSTMENT - MULTIFUNCTION-CONTOUR TRIMMING UNIT 2 X 0,4 KW - PROFILE SCRAPER WITH QUICK CHANGE HEADS - PNEUM. ADJUSTMENT SCRAPER - GLUE JOINT SCRAPER -BUFFING UNIT FACILITIES -MOTORIZED ADJUSTABLE INFEED FENCE. EXTENDED TO 300 MM -AUTOMATIC EDGE FEEDER -MOTORIZED HEIGHT ADJUSTMENT -PNEUM.. CONTROLLED ENTRY LOCK -WORKPIECE SUPPORT UP TO 600 MM TELESCOPIC -CONTROL POWERCONTROL PC 20 +. TECHNICAL DATA -WORKPIECE WIDTH MIN: - AT WORK-PIECE THICKNESS 8-22 MM 70 MM * - FOR PANEL THICKNESS 23-40 MM 120 MM * - WORKPIECE THICKNESS 41-60 MM 150 MM * * DEPENDING ON THE LENGTH OF WORKPIECE - WORKPIECE OVERHANG 38 MM - THICKNESS 8-60 MM - EDGE HEIGHT MAX. = WORKPIECE HEIGHT + 6 MM - EDGE MATERIAL ROLL 0.4-3 MM - EDGE CROSS SECTION MAX. -FOR PVC 135 MM 2 - FOR VENEER 100 MM&ACIRC;&SUP2; - ROLL DIAMETER OF MAXIMUM 830 MM - EDGE MATERIAL STRIP 0.4-8 MM - EDGE CROSS SECTION MAX. -IN STRIP 360 MM&ACIRC;&SUP2; - FEED 8 - 14 M/MIN - FEED MAX FORM MILLING MACHINE 14 M/MIN - WORKING HEIGHT 950 MM - MIN. 6 BAR - PNEUMATIC CONNECTION TOTAL LENGTH 5.270 MM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-manufacturer: brandt , type: kd 79/2 cf, year: 2002, min-max edge material mm: 0,5-3,0, min-max feed m/min: 18, axis control: no, premilling: yes, fine milling: yes, application of separation agent: no, ir zone: no, coil magazine: yes, strip magazin: yes, min.-max. batten magazine mm: yes, mitre stations: yes, pre-milling: yes, bevel milling: yes, 2 motors: yes, radius scraper: yes, flat scraper: yes, bonding part eva: yes, buffing unit: yes, top pressure belt/roller: rolle, work piece refeeding: yes, year :2002 MANUFACTURER: BRANDT , TYPE: KD 79/2 CF, YEAR: 2002, MIN-MAX EDGE MATERIAL MM: 0,5-3,0, MIN-MAX FEED M/MIN: 18, AXIS CONTROL: NO, PREMILLING: YES, FINE MILLING: YES, APPLICATION OF SEPARATION AGENT: NO, IR ZONE: NO, COIL MAGAZINE: YES, STRIP MAGAZIN: YES, MIN.-MAX. BATTEN MAGAZINE MM: YES, MITRE STATIONS: YES, PRE-MILLING: YES, BEVEL MILLING: YES, 2 MOTORS: YES, RADIUS SCRAPER: YES, FLAT SCRAPER: YES, BONDING PART EVA: YES, BUFFING UNIT: YES, TOP PRESSURE BELT/ROLLER: ROLLE, WORK PIECE REFEEDING: YES, YEAR :2002
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-facilities
-hot melt glue gluing part a20 for rolls
up to 3 mm and strip material up to 20 mm
-hl83 facet/straight unit
-extension running 500 mm
-workpiece support in a scissor version,
extendable up to 1000 mm
-autom. adjustment of the pressure zone
-pneum.. adjustment cap motor
-pneum.. adjustment of chamfer/straight
-milling unit 1.5 kw
-pneum.. adjustment before milling unit
-contour trimming unit fk 11 manual
i-wechelkopfsatz for profile milling
slide bevel cutter set for fk11 20 degrees (1st movement)
slide radius cutter set for fk11 r2 (2nd movement)
-for plasters in direction profile
-pneum.. adjustment for cleaning
-for plasters in direction glue joint
-use control glue grout scraper
-buffing unit up and down
-electr. height adjustment

technical data:
-feed infinitely variable 18 - 24 m / min.
-working height 950 mm
-minimum working width:
-55 mm workpiece thickness 22 mm
-100 mm workpiece thickness 60 mm
(depending on the length of the workpiece)
-workpiece projection 30 mm
-workpiece thickness 12-60 mm
-edge material strip max 0,4-20 mm
-edge cross-section strips up to 900 mm2 cross-section
-edge material role 0.3-3 mm
-max - pvc edge cross-section 135 mm2
-for veneer 100 mm2
-roll diameter of maximum 830 mm
-pneumatic connection 7-8 bar FACILITIES -HOT MELT GLUE GLUING PART A20 FOR ROLLS UP TO 3 MM AND STRIP MATERIAL UP TO 20 MM -HL83 FACET/STRAIGHT UNIT -EXTENSION RUNNING 500 MM -WORKPIECE SUPPORT IN A SCISSOR VERSION, EXTENDABLE UP TO 1000 MM -AUTOM. ADJUSTMENT OF THE PRESSURE ZONE -PNEUM.. ADJUSTMENT CAP MOTOR -PNEUM.. ADJUSTMENT OF CHAMFER/STRAIGHT -MILLING UNIT 1.5 KW -PNEUM.. ADJUSTMENT BEFORE MILLING UNIT -CONTOUR TRIMMING UNIT FK 11 MANUAL I-WECHELKOPFSATZ FOR PROFILE MILLING SLIDE BEVEL CUTTER SET FOR FK11 20 DEGREES (1ST MOVEMENT) SLIDE RADIUS CUTTER SET FOR FK11 R2 (2ND MOVEMENT) -FOR PLASTERS IN DIRECTION PROFILE -PNEUM.. ADJUSTMENT FOR CLEANING -FOR PLASTERS IN DIRECTION GLUE JOINT -USE CONTROL GLUE GROUT SCRAPER -BUFFING UNIT UP AND DOWN -ELECTR. HEIGHT ADJUSTMENT TECHNICAL DATA: -FEED INFINITELY VARIABLE 18 - 24 M / MIN. -WORKING HEIGHT 950 MM -MINIMUM WORKING WIDTH: -55 MM WORKPIECE THICKNESS 22 MM -100 MM WORKPIECE THICKNESS 60 MM (DEPENDING ON THE LENGTH OF THE WORKPIECE) -WORKPIECE PROJECTION 30 MM -WORKPIECE THICKNESS 12-60 MM -EDGE MATERIAL STRIP MAX 0,4-20 MM -EDGE CROSS-SECTION STRIPS UP TO 900 MM2 CROSS-SECTION -EDGE MATERIAL ROLE 0.3-3 MM -MAX - PVC EDGE CROSS-SECTION 135 MM2 -FOR VENEER 100 MM2 -ROLL DIAMETER OF MAXIMUM 830 MM -PNEUMATIC CONNECTION 7-8 BAR
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-weight approx.: 3500 kg<br/>dimensions (l x w x h) approx.: 5450 x 1000 x 1500 mm<br/>description: edgebander, edge banding machine<br> edge thickness from 0.4 up to 30 mm<br> worpiece thickness from 10 mm up to 60 mm<br> feed motor 1.50 kw<br> edge magazine for 1 edge roller<br> gluing unit<br> pressure group with (1+3) rollers<br> snipping unit, 2 motors<br> fine trimming unit, 2 x motor 2.20 kw-12000 rpm<br> profile scraper unit WEIGHT APPROX.: 3500 KG
DIMENSIONS (L X W X H) APPROX.: 5450 X 1000 X 1500 MM
DESCRIPTION: EDGEBANDER, EDGE BANDING MACHINE
EDGE THICKNESS FROM 0.4 UP TO 30 MM
WORPIECE THICKNESS FROM 10 MM UP TO 60 MM
FEED MOTOR 1.50 KW
EDGE MAGAZINE FOR 1 EDGE ROLLER
GLUING UNIT
PRESSURE GROUP WITH (1+3) ROLLERS
SNIPPING UNIT, 2 MOTORS
FINE TRIMMING UNIT, 2 X MOTOR 2.20 KW-12000 RPM
PROFILE SCRAPER UNIT
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-facilities:
-quickmelt gluing unit, glue specifying finely dosed glue role (either equal to or gegenlauf)
-auto. edge magazine rolls and lengths
-reinforced before cap scissors
-heavy pressure zone with main roller (pneumatic pressurizes) and 3 reprinted roles, including program adjustment
-motor adjustable - and height-adjustable top pressure
-electronic controller pc 20 +
-modem for remote service/maintenance
-noise control panel
-hood interior lighting
-infeed fence extended about adjustable program, and around 300 mm
-auto. edge feeder
-release indication workpiece
-trimming unit of 2 x 2, 2 kw, 200 hz, - auto-package ii for 2 fraes-machines
-chamfer/straight, with pneum unit. 
2-point adjustment
-milling unit 2 x 0,55 kw 0 degrees
-milling unit 2 x 0, 55 kw synchronous operation, program adjustment on edge thickness
-contour trimming unit up + down arrow 2 x 0, 35 kw
-scraping unit (chamfer/rounding) with quick change heads
-surface scraper (joint)
-detergent specifying workpiece
-buffing unit, 2 engines

technical data (basic machine):
edge thickness 0.4-12 mm
roll away 3 x 45 mm
or 0.8 x 65 mm
workpiece thickness 8-60 mm
feed variable 8 - 16 m / min.
(*) when you select the form thrower takes place
automatic switching to 11 m / min.
electric 400 v - 3 ph - 50 hz.
pneumatic connection of min. 6 bar
connected load approx. 15,5 kw
total length 6,360 mm
 FACILITIES: -QUICKMELT GLUING UNIT, GLUE SPECIFYING FINELY DOSED GLUE ROLE (EITHER EQUAL TO OR GEGENLAUF) -AUTO. EDGE MAGAZINE ROLLS AND LENGTHS -REINFORCED BEFORE CAP SCISSORS -HEAVY PRESSURE ZONE WITH MAIN ROLLER (PNEUMATIC PRESSURIZES) AND 3 REPRINTED ROLES, INCLUDING PROGRAM ADJUSTMENT -MOTOR ADJUSTABLE - AND HEIGHT-ADJUSTABLE TOP PRESSURE -ELECTRONIC CONTROLLER PC 20 + -MODEM FOR REMOTE SERVICE/MAINTENANCE -NOISE CONTROL PANEL -HOOD INTERIOR LIGHTING -INFEED FENCE EXTENDED ABOUT ADJUSTABLE PROGRAM, AND AROUND 300 MM -AUTO. EDGE FEEDER -RELEASE INDICATION WORKPIECE -TRIMMING UNIT OF 2 X 2, 2 KW, 200 HZ, - AUTO-PACKAGE II FOR 2 FRAES-MACHINES -CHAMFER/STRAIGHT, WITH PNEUM UNIT. 2-POINT ADJUSTMENT -MILLING UNIT 2 X 0,55 KW 0 DEGREES -MILLING UNIT 2 X 0, 55 KW SYNCHRONOUS OPERATION, PROGRAM ADJUSTMENT ON EDGE THICKNESS -CONTOUR TRIMMING UNIT UP + DOWN ARROW 2 X 0, 35 KW -SCRAPING UNIT (CHAMFER/ROUNDING) WITH QUICK CHANGE HEADS -SURFACE SCRAPER (JOINT) -DETERGENT SPECIFYING WORKPIECE -BUFFING UNIT, 2 ENGINES TECHNICAL DATA (BASIC MACHINE): EDGE THICKNESS 0.4-12 MM ROLL AWAY 3 X 45 MM OR 0.8 X 65 MM WORKPIECE THICKNESS 8-60 MM FEED VARIABLE 8 - 16 M / MIN. (*) WHEN YOU SELECT THE FORM THROWER TAKES PLACE AUTOMATIC SWITCHING TO 11 M / MIN. ELECTRIC 400 V - 3 PH - 50 HZ. PNEUMATIC CONNECTION OF MIN. 6 BAR CONNECTED LOAD APPROX. 15,5 KW TOTAL LENGTH 6,360 MM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 20.100 €
Ubicación: Land-weight approx.: 6000 kg<br/>dimensions (l x w x h) approx.: 7800 x 1200 x 2100 mm<br/>description: max. panel height 60 mm, pressure with rubber belt, panel support guides with positioning by nc, no. panel sizing / milling units 1 unit pre-milling unit, edge coil magazine no. positions 2, glue pot for hot melt glue, premelter for hot melt glue, no. edge processing units 7 processing unit end trimming unit, processing unit fine trimming unit to trim and round, processing unit corner rounding unit, processing unit edge scraping unit, processing unit glue scraping unit, processing unit buffing unit, processing unit air heating unit, control system cni, safety standard ce mark WEIGHT APPROX.: 6000 KG
DIMENSIONS (L X W X H) APPROX.: 7800 X 1200 X 2100 MM
DESCRIPTION: MAX. PANEL HEIGHT 60 MM, PRESSURE WITH RUBBER BELT, PANEL SUPPORT GUIDES WITH POSITIONING BY NC, NO. PANEL SIZING / MILLING UNITS 1 UNIT PRE-MILLING UNIT, EDGE COIL MAGAZINE NO. POSITIONS 2, GLUE POT FOR HOT MELT GLUE, PREMELTER FOR HOT MELT GLUE, NO. EDGE PROCESSING UNITS 7 PROCESSING UNIT END TRIMMING UNIT, PROCESSING UNIT FINE TRIMMING UNIT TO TRIM AND ROUND, PROCESSING UNIT CORNER ROUNDING UNIT, PROCESSING UNIT EDGE SCRAPING UNIT, PROCESSING UNIT GLUE SCRAPING UNIT, PROCESSING UNIT BUFFING UNIT, PROCESSING UNIT AIR HEATING UNIT, CONTROL SYSTEM CNI, SAFETY STANDARD CE MARK
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-facilities:
-quick change gluing unit (quickmelt)
for hot-melt glue.
-automatic edge magazine
-reinforced before cap scissors
-central adjustable top pressure
-noise control panel

standard unit assembly
-trimming unit chamfer/straight
-milling unit up and down
-fine / radius milling unit up and down
-eckenkopieraggragt
-scraping unit for pvc edges
-buffing unit 2 motors

technical data
edge thickness 0.4-8 mm
roll away 3 x 45 mm
workpiece thickness 8-40 mm
workpiece width of min. 65 mm
workpiece length of min. 160 mm
feed max approx. 11 m / min.
electric 400 v - 3 ph - 50 hz.
pneumatic connection of min. 6 bar
connected load approx. 7 kw
total length 5.240 mm
 FACILITIES: -QUICK CHANGE GLUING UNIT (QUICKMELT) FOR HOT-MELT GLUE. -AUTOMATIC EDGE MAGAZINE -REINFORCED BEFORE CAP SCISSORS -CENTRAL ADJUSTABLE TOP PRESSURE -NOISE CONTROL PANEL STANDARD UNIT ASSEMBLY -TRIMMING UNIT CHAMFER/STRAIGHT -MILLING UNIT UP AND DOWN -FINE / RADIUS MILLING UNIT UP AND DOWN -ECKENKOPIERAGGRAGT -SCRAPING UNIT FOR PVC EDGES -BUFFING UNIT 2 MOTORS TECHNICAL DATA EDGE THICKNESS 0.4-8 MM ROLL AWAY 3 X 45 MM WORKPIECE THICKNESS 8-40 MM WORKPIECE WIDTH OF MIN. 65 MM WORKPIECE LENGTH OF MIN. 160 MM FEED MAX APPROX. 11 M / MIN. ELECTRIC 400 V - 3 PH - 50 HZ. PNEUMATIC CONNECTION OF MIN. 6 BAR CONNECTED LOAD APPROX. 7 KW TOTAL LENGTH 5.240 MM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 11.400 €
Ubicación: Land-weight approx.: 3000 kg<br/>dimensions (l x w x h) approx.: 6750 x 1200 x 2100 mm<br/>description: max. panel height 60 mm, pressure with idle wheels, no. panel sizing / milling units 1 unit pre-milling unit, edge coil magazine, premelter for polyurethane glue nordson mc series, no. edge processing units 7 processing unit end trimming unit, processing unit fine trimming unit to trim and round, processing unit fine trimming unit to trim and round, processing unit corner rounding unit, processing unit edge scraping unit, processing unit glue scraping unit, processing unit buffing unit, control system power control pc 20, safety standard ce mark WEIGHT APPROX.: 3000 KG
DIMENSIONS (L X W X H) APPROX.: 6750 X 1200 X 2100 MM
DESCRIPTION: MAX. PANEL HEIGHT 60 MM, PRESSURE WITH IDLE WHEELS, NO. PANEL SIZING / MILLING UNITS 1 UNIT PRE-MILLING UNIT, EDGE COIL MAGAZINE, PREMELTER FOR POLYURETHANE GLUE NORDSON MC SERIES, NO. EDGE PROCESSING UNITS 7 PROCESSING UNIT END TRIMMING UNIT, PROCESSING UNIT FINE TRIMMING UNIT TO TRIM AND ROUND, PROCESSING UNIT FINE TRIMMING UNIT TO TRIM AND ROUND, PROCESSING UNIT CORNER ROUNDING UNIT, PROCESSING UNIT EDGE SCRAPING UNIT, PROCESSING UNIT GLUE SCRAPING UNIT, PROCESSING UNIT BUFFING UNIT, CONTROL SYSTEM POWER CONTROL PC 20, SAFETY STANDARD CE MARK
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-overview of aggregate loading:
-release agent spraying unit
-trimming unit
-gluing part a20 with 2 wheels
-trimming unit hl84
-milling unit
-contour trimming unit fk11 manual
-profile scraper pn10
-finish unit
-glue joint scraper
-schwabbelaggregat

power contraol pc 22

technical data:
-feed ⦠18 - 25 m / min
-feed up with fk11 ⦠20 m / min
-working height ⦠950 mm
-pneumatic connection ⦠7-8 bar
-total length ⦠7755 mm
-workpiece width min:
-at work-piece thickness 12-22 mm ⦠60 mm *.
-for panel thickness 23-40 mm ⦠105 mm *.
* depending on the length of the workpiece
-workpiece overhang ⦠30 mm
-workpiece thickness ⦠12-40 mm
(workpiece thickness optional) ⦠8-60 mm
-edge material role ⦠0.3-3 mm
-edge cross section max: â¦
-for pvc ⦠135 mm â²
-for veneer ⦠100 mmâ²
-roll diameter max. ⦠830 mm
-edge material strip ⦠0.4-20 mm
-edge cross section max: â¦
-in strip ⦠900 mmâ²

amenities:
-workpiece support scissor design kal
210/6
-workpiece thickness 60 mm site. 40 mm
-workpiece thickness 8 mm kal200/300/kfl500
-order unit pu (changeable
-qa glue container front piece (removable)
-automation package chamfer/radius
kal210/6/a20
-vertical double roll keying
-work guide for fk device
i change head set for form milling fk
-i india radius cutter set r = 1,5-3 mm ambition
-detergent spraying unit top/bottom
ambition
 OVERVIEW OF AGGREGATE LOADING: -RELEASE AGENT SPRAYING UNIT -TRIMMING UNIT -GLUING PART A20 WITH 2 WHEELS -TRIMMING UNIT HL84 -MILLING UNIT -CONTOUR TRIMMING UNIT FK11 MANUAL -PROFILE SCRAPER PN10 -FINISH UNIT -GLUE JOINT SCRAPER -SCHWABBELAGGREGAT POWER CONTRAOL PC 22 TECHNICAL DATA: -FEED &ACIRC;&BRVBAR; 18 - 25 M / MIN -FEED UP WITH FK11 &ACIRC;&BRVBAR; 20 M / MIN -WORKING HEIGHT &ACIRC;&BRVBAR; 950 MM -PNEUMATIC CONNECTION &ACIRC;&BRVBAR; 7-8 BAR -TOTAL LENGTH &ACIRC;&BRVBAR; 7755 MM -WORKPIECE WIDTH MIN: -AT WORK-PIECE THICKNESS 12-22 MM &ACIRC;&BRVBAR; 60 MM *. -FOR PANEL THICKNESS 23-40 MM &ACIRC;&BRVBAR; 105 MM *. * DEPENDING ON THE LENGTH OF THE WORKPIECE -WORKPIECE OVERHANG &ACIRC;&BRVBAR; 30 MM -WORKPIECE THICKNESS &ACIRC;&BRVBAR; 12-40 MM (WORKPIECE THICKNESS OPTIONAL) &ACIRC;&BRVBAR; 8-60 MM -EDGE MATERIAL ROLE &ACIRC;&BRVBAR; 0.3-3 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -FOR PVC &ACIRC;&BRVBAR; 135 MM &ACIRC;&SUP2; -FOR VENEER &ACIRC;&BRVBAR; 100 MM&ACIRC;&SUP2; -ROLL DIAMETER MAX. &ACIRC;&BRVBAR; 830 MM -EDGE MATERIAL STRIP &ACIRC;&BRVBAR; 0.4-20 MM -EDGE CROSS SECTION MAX: &ACIRC;&BRVBAR; -IN STRIP &ACIRC;&BRVBAR; 900 MM&ACIRC;&SUP2; AMENITIES: -WORKPIECE SUPPORT SCISSOR DESIGN KAL 210/6 -WORKPIECE THICKNESS 60 MM SITE. 40 MM -WORKPIECE THICKNESS 8 MM KAL200/300/KFL500 -ORDER UNIT PU (CHANGEABLE -QA GLUE CONTAINER FRONT PIECE (REMOVABLE) -AUTOMATION PACKAGE CHAMFER/RADIUS KAL210/6/A20 -VERTICAL DOUBLE ROLL KEYING -WORK GUIDE FOR FK DEVICE I CHANGE HEAD SET FOR FORM MILLING FK -I INDIA RADIUS CUTTER SET R = 1,5-3 MM AMBITION -DETERGENT SPRAYING UNIT TOP/BOTTOM AMBITION
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 2.400 €
Ubicación: Land-weight approx.: 14000 kg<br/>dimensions (l x w x h) approx.: 7800 x 12000 x 2050 mm<br/>description: edge thickness: min. 0.4 mm - max. 30 mm, workpiece thickness: min 8 mm - max. 60 mm, workpiece width min. 235 mm, maximum workpiece width approx. 3000 mm, total power: 115 kw, consisting in: 1 x squaring-edging combined machine ecr-216/72-uk9: double-end tenoner for squaring of pieces up to 3000 mm long, with 2 joint trimming units in each side, unilateral edgebander working the pieces for its left side with the following aggregates: gluing unit, edge magazine for 1 edge roller, pressure group with (1+3) rollers, snipping unit, fine trimming unit: 2 x 1.50 kw, profile trimming unit, profile scraper unit, spraying unit, edge buffing unit, 1 x driven roller conveyor 5600 mm long and roller width 2700 mm, 1 x unilateral edgebander uk-9c alu with the following aggregates: gluing unit, edge magazine for 1 edge roller, pressure group with (1+3) rollers, snipping unit, fine trimming unit: 2 x 1.50 kw, profile trimming unit, profile scraper unit, 1 x machine with a edge buffing group WEIGHT APPROX.: 14000 KG
DIMENSIONS (L X W X H) APPROX.: 7800 X 12000 X 2050 MM
DESCRIPTION: EDGE THICKNESS: MIN. 0.4 MM - MAX. 30 MM, WORKPIECE THICKNESS: MIN 8 MM - MAX. 60 MM, WORKPIECE WIDTH MIN. 235 MM, MAXIMUM WORKPIECE WIDTH APPROX. 3000 MM, TOTAL POWER: 115 KW, CONSISTING IN: 1 X SQUARING-EDGING COMBINED MACHINE ECR-216/72-UK9: DOUBLE-END TENONER FOR SQUARING OF PIECES UP TO 3000 MM LONG, WITH 2 JOINT TRIMMING UNITS IN EACH SIDE, UNILATERAL EDGEBANDER WORKING THE PIECES FOR ITS LEFT SIDE WITH THE FOLLOWING AGGREGATES: GLUING UNIT, EDGE MAGAZINE FOR 1 EDGE ROLLER, PRESSURE GROUP WITH (1+3) ROLLERS, SNIPPING UNIT, FINE TRIMMING UNIT: 2 X 1.50 KW, PROFILE TRIMMING UNIT, PROFILE SCRAPER UNIT, SPRAYING UNIT, EDGE BUFFING UNIT, 1 X DRIVEN ROLLER CONVEYOR 5600 MM LONG AND ROLLER WIDTH 2700 MM, 1 X UNILATERAL EDGEBANDER UK-9C ALU WITH THE FOLLOWING AGGREGATES: GLUING UNIT, EDGE MAGAZINE FOR 1 EDGE ROLLER, PRESSURE GROUP WITH (1+3) ROLLERS, SNIPPING UNIT, FINE TRIMMING UNIT: 2 X 1.50 KW, PROFILE TRIMMING UNIT, PROFILE SCRAPER UNIT, 1 X MACHINE WITH A EDGE BUFFING GROUP
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-qty. 1 second-hand rewinder
mfc.:	demag, bbc	built:	1967	operation speed:	max. 500 m/min.	
strip width:	690 - 1600 mm			thickness:	0.32 – 3.0  mm
edging width:		max. 2 x 60 mm		min. 2 x 3.5  mm
coil od:		1850 mm max.		coil weight:	30 t max.
consist of:	de-coiler	feeding device & driver	strip tension measurement unit
crop shear	damping roll	strip control unit 	edging shear		
scrap coiler	strip thickness measurement 	oiling machine	coiler
 QTY. 1 SECOND-HAND REWINDER MFC.: DEMAG, BBC BUILT: 1967 OPERATION SPEED: MAX. 500 M/MIN. STRIP WIDTH: 690 - 1600 MM THICKNESS: 0.32 – 3.0 MM EDGING WIDTH: MAX. 2 X 60 MM MIN. 2 X 3.5 MM COIL OD: 1850 MM MAX. COIL WEIGHT: 30 T MAX. CONSIST OF: DE-COILER FEEDING DEVICE & DRIVER STRIP TENSION MEASUREMENT UNIT CROP SHEAR DAMPING ROLL STRIP CONTROL UNIT EDGING SHEAR SCRAP COILER STRIP THICKNESS MEASUREMENT OILING MACHINE COILER
Vendedor: MET-TECH GMBH
Año de construcción: usado
Precio: used machinery auction RESALE 21.000 €
Ubicación: Land-weight approx.: 4500 kg<br/>dimensions (l x w x h) approx.: 7800 x 900 x 2000 mm<br/>description: max. panel height 60 mm, max. forward feed speed 28 m/min, pressure with rubber belt, panel support guides with positioning by nc, no. panel sizing / milling units 1 unit pre-milling unit, edge coil magazine no. positions 2, glue pot for hot melt glue, premelter for hot melt glue, no. edge processing units 6 processing unit end trimming unit, processing unit top and bottom rough trimming unit, processing unit corner rounding unit, processing unit edge scraping unit, processing unit glue scraping unit, processing unit buffing unit, control system winedge, safety standard ce mark WEIGHT APPROX.: 4500 KG
DIMENSIONS (L X W X H) APPROX.: 7800 X 900 X 2000 MM
DESCRIPTION: MAX. PANEL HEIGHT 60 MM, MAX. FORWARD FEED SPEED 28 M/MIN, PRESSURE WITH RUBBER BELT, PANEL SUPPORT GUIDES WITH POSITIONING BY NC, NO. PANEL SIZING / MILLING UNITS 1 UNIT PRE-MILLING UNIT, EDGE COIL MAGAZINE NO. POSITIONS 2, GLUE POT FOR HOT MELT GLUE, PREMELTER FOR HOT MELT GLUE, NO. EDGE PROCESSING UNITS 6 PROCESSING UNIT END TRIMMING UNIT, PROCESSING UNIT TOP AND BOTTOM ROUGH TRIMMING UNIT, PROCESSING UNIT CORNER ROUNDING UNIT, PROCESSING UNIT EDGE SCRAPING UNIT, PROCESSING UNIT GLUE SCRAPING UNIT, PROCESSING UNIT BUFFING UNIT, CONTROL SYSTEM WINEDGE, SAFETY STANDARD CE MARK
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-qty. 1 second-hand cut-to-length line
mfc.:     wean-damiron, robertson, siemens    		built: 	1964
coil weight:        25 t 		coil od:  	1850 mm max.
operation speed:  	241 m/min.                  sheet length:    	865 – 4300 mm
sheet width:     	450 – 1600 mm        	sheet thickness: 	0.3 – 3.0 mm                   
cutting accuracy:  	+/- 0.8 mm             	package weight: 	10 t max.
consist of:          decoiler	straighteners 		shear	 edging shear	
scrap chopper		loop pit	isotope thickness gauge	drum shear 	
sheet straightener	inspection stand 	stack unit 	guiding units
 QTY. 1 SECOND-HAND CUT-TO-LENGTH LINE MFC.: WEAN-DAMIRON, ROBERTSON, SIEMENS BUILT: 1964 COIL WEIGHT: 25 T COIL OD: 1850 MM MAX. OPERATION SPEED: 241 M/MIN. SHEET LENGTH: 865 – 4300 MM SHEET WIDTH: 450 – 1600 MM SHEET THICKNESS: 0.3 – 3.0 MM CUTTING ACCURACY: +/- 0.8 MM PACKAGE WEIGHT: 10 T MAX. CONSIST OF: DECOILER STRAIGHTENERS SHEAR EDGING SHEAR SCRAP CHOPPER LOOP PIT ISOTOPE THICKNESS GAUGE DRUM SHEAR SHEET STRAIGHTENER INSPECTION STAND STACK UNIT GUIDING UNITS
Vendedor: MET-TECH GMBH
Año de construcción: usado
Precio: used machinery auction RESALE 33.000 €
Ubicación: Land-weight approx.: 5800 kg<br/>dimensions (l x w x h) approx.: 8750 x 1300 x 1900 mm<br/>description: max. panel height 60 mm, pressure with rubber belt, panel support guides with positioning by nc, no. panel sizing / milling units 1 unit pre-milling unit, edge coil magazine no. positions 24, premelter for polyurethane glue nordson mc series, no. edge processing units 6 processing unit end trimming unit, processing unit top and bottom rough trimming unit, processing unit corner rounding unit, constructor model fk 13 automatic tool change, processing unit edge scraping unit, processing unit glue scraping unit, processing unit buffing unit, control system power control pc 22, safety standard ce mark WEIGHT APPROX.: 5800 KG
DIMENSIONS (L X W X H) APPROX.: 8750 X 1300 X 1900 MM
DESCRIPTION: MAX. PANEL HEIGHT 60 MM, PRESSURE WITH RUBBER BELT, PANEL SUPPORT GUIDES WITH POSITIONING BY NC, NO. PANEL SIZING / MILLING UNITS 1 UNIT PRE-MILLING UNIT, EDGE COIL MAGAZINE NO. POSITIONS 24, PREMELTER FOR POLYURETHANE GLUE NORDSON MC SERIES, NO. EDGE PROCESSING UNITS 6 PROCESSING UNIT END TRIMMING UNIT, PROCESSING UNIT TOP AND BOTTOM ROUGH TRIMMING UNIT, PROCESSING UNIT CORNER ROUNDING UNIT, CONSTRUCTOR MODEL FK 13 AUTOMATIC TOOL CHANGE, PROCESSING UNIT EDGE SCRAPING UNIT, PROCESSING UNIT GLUE SCRAPING UNIT, PROCESSING UNIT BUFFING UNIT, CONTROL SYSTEM POWER CONTROL PC 22, SAFETY STANDARD CE MARK
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-composition:

-adjustable guide on entry with numeric visor

-pre-milling unit  with 2 motors  2 x kw 2.2

-lamp zone to pre-heat the side of the panel

-gluing unit with electropneumatic regulation, glue opening

-reversal glue spreader roller

-guillotine to cut the edge abs

-numerical thickness of gluing

-nr. 3 counter-pressure rollers

-end cutting unit with 2 motors indipendent  0-15 ° adjustment from control panel

-trimmer unit

-rounding unit

-scraper unit

-glue scraping unit

-buffing unit

-box shavings

min / max workpiece thickness  mm. 8 - 60

edge thickness in strips mm. 0.4 - 8

edge thickness in roll max. mm. 3.0 x 45 / 1.0 x 65

working floor height on the ground mm. 950

engine power kw 10.5

suction power 2780 m3 / h speed 28 m / sec

compressed air consumption 350 nl / min

rated current 17a

volt. 380 - 50 hz

weight kg. 1690

machine length mm. 4860

year of manufacture 2010

ce declaration of conformity COMPOSITION: -ADJUSTABLE GUIDE ON ENTRY WITH NUMERIC VISOR -PRE-MILLING UNIT WITH 2 MOTORS 2 X KW 2.2 -LAMP ZONE TO PRE-HEAT THE SIDE OF THE PANEL -GLUING UNIT WITH ELECTROPNEUMATIC REGULATION, GLUE OPENING -REVERSAL GLUE SPREADER ROLLER -GUILLOTINE TO CUT THE EDGE ABS -NUMERICAL THICKNESS OF GLUING -NR. 3 COUNTER-PRESSURE ROLLERS -END CUTTING UNIT WITH 2 MOTORS INDIPENDENT 0-15 ° ADJUSTMENT FROM CONTROL PANEL -TRIMMER UNIT -ROUNDING UNIT -SCRAPER UNIT -GLUE SCRAPING UNIT -BUFFING UNIT -BOX SHAVINGS MIN / MAX WORKPIECE THICKNESS MM. 8 - 60 EDGE THICKNESS IN STRIPS MM. 0.4 - 8 EDGE THICKNESS IN ROLL MAX. MM. 3.0 X 45 / 1.0 X 65 WORKING FLOOR HEIGHT ON THE GROUND MM. 950 ENGINE POWER KW 10.5 SUCTION POWER 2780 M3 / H SPEED 28 M / SEC COMPRESSED AIR CONSUMPTION 350 NL / MIN RATED CURRENT 17A VOLT. 380 - 50 HZ WEIGHT KG. 1690 MACHINE LENGTH MM. 4860 YEAR OF MANUFACTURE 2010 CE DECLARATION OF CONFORMITY
Vendedor: VERGA ERCOLE di Roberto Verga & C. S.A.S
Año de construcción: usado
Precio: used machinery auction RESALE 3.900 €
Ubicación: Land-weight approx.: 2900 kg<br/>dimensions (l x w x h) approx.: 6800 x 1400 x 1800 mm<br/>description: max. panel height 55 mm, max. edge thickness 14 mm, pressure with idle wheels, panel support guides with positioning by nc, pre-milling unit, edge coil magazine, glue pot for hot melt glue, premelter for hot melt glue, end trimming unit, fine trimming unit to trim and round, corner rounding unit, edge scraping unit, glue scraping unit, buffing unit, safety standard ec mark WEIGHT APPROX.: 2900 KG
DIMENSIONS (L X W X H) APPROX.: 6800 X 1400 X 1800 MM
DESCRIPTION: MAX. PANEL HEIGHT 55 MM, MAX. EDGE THICKNESS 14 MM, PRESSURE WITH IDLE WHEELS, PANEL SUPPORT GUIDES WITH POSITIONING BY NC, PRE-MILLING UNIT, EDGE COIL MAGAZINE, GLUE POT FOR HOT MELT GLUE, PREMELTER FOR HOT MELT GLUE, END TRIMMING UNIT, FINE TRIMMING UNIT TO TRIM AND ROUND, CORNER ROUNDING UNIT, EDGE SCRAPING UNIT, GLUE SCRAPING UNIT, BUFFING UNIT, SAFETY STANDARD EC MARK
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-minimum panel length 120 mm
min/max thickness 8 / 45 mm
thickness 0,4-6 mm of the edge material
compressed air 6-7 bar
length 4400 mm
minimum panel width 75 mm
eckenrundungsfrã¤saggregat of max 40 mm
feed speed 10 m / min.
8kw 380v power 17a
glue tank with roller
printer manual
end trimming unit with medium frequency motor 12000 rpm and 0,2 of kw, with 2 blades for
front and rear flush caps
universal milling unit with 2 swivel medium frequency motors 0,55 kw (12000 rpm) for
flush-chamfer radius
eckenrundungsfrã¤sggregat fd40 for milling of edges and softforming plates or to the
corners round, with 2 motors per 0.27 kw for manipulating plates 10-40 mm thick and
a length of at least 120 mm
scraping unit with scraping r = 3mm for reworking of pvc edges on machined
radius
buffing unit for polishing of pvc and abs edges
surface scraper
the machine is with an electronic frequency converter and also with a programmable
plc control system equipped with an integrated security program for the supply of the plates. the
setting all the models easily via digital counter. the machine has
also has a sound safety cover, which when opened automatically the machining units
turns off.
missing: owner's manual, wiring diagram MINIMUM PANEL LENGTH 120 MM MIN/MAX THICKNESS 8 / 45 MM THICKNESS 0,4-6 MM OF THE EDGE MATERIAL COMPRESSED AIR 6-7 BAR LENGTH 4400 MM MINIMUM PANEL WIDTH 75 MM ECKENRUNDUNGSFR&ATILDE;&CURREN;SAGGREGAT OF MAX 40 MM FEED SPEED 10 M / MIN. 8KW 380V POWER 17A GLUE TANK WITH ROLLER PRINTER MANUAL END TRIMMING UNIT WITH MEDIUM FREQUENCY MOTOR 12000 RPM AND 0,2 OF KW, WITH 2 BLADES FOR FRONT AND REAR FLUSH CAPS UNIVERSAL MILLING UNIT WITH 2 SWIVEL MEDIUM FREQUENCY MOTORS 0,55 KW (12000 RPM) FOR FLUSH-CHAMFER RADIUS ECKENRUNDUNGSFR&ATILDE;&CURREN;SGGREGAT FD40 FOR MILLING OF EDGES AND SOFTFORMING PLATES OR TO THE CORNERS ROUND, WITH 2 MOTORS PER 0.27 KW FOR MANIPULATING PLATES 10-40 MM THICK AND A LENGTH OF AT LEAST 120 MM SCRAPING UNIT WITH SCRAPING R = 3MM FOR REWORKING OF PVC EDGES ON MACHINED RADIUS BUFFING UNIT FOR POLISHING OF PVC AND ABS EDGES SURFACE SCRAPER THE MACHINE IS WITH AN ELECTRONIC FREQUENCY CONVERTER AND ALSO WITH A PROGRAMMABLE PLC CONTROL SYSTEM EQUIPPED WITH AN INTEGRATED SECURITY PROGRAM FOR THE SUPPLY OF THE PLATES. THE SETTING ALL THE MODELS EASILY VIA DIGITAL COUNTER. THE MACHINE HAS ALSO HAS A SOUND SAFETY COVER, WHICH WHEN OPENED AUTOMATICALLY THE MACHINING UNITS TURNS OFF. MISSING: OWNER'S MANUAL, WIRING DIAGRAM
Vendedor: Wilhelm Bachmann GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 3.600 €
Ubicación: Land-weight approx.: 2000 kg<br/>dimensions (l x w x h) approx.: 5700 x 900 x 2000 mm<br/>description: max. panel height 45 mm, pressure with idle wheels, panel support guides, no. panel sizing / milling units 1 unit pre-milling unit, edge coil magazine, glue pot for hot melt glue, no. edge processing units 6 processing unit end trimming unit, processing unit fine trimming unit to trim and round, processing unit corner rounding unit, processing unit edge scraping unit, processing unit glue scraping unit, processing unit buffing unit, safety standard ce mark WEIGHT APPROX.: 2000 KG
DIMENSIONS (L X W X H) APPROX.: 5700 X 900 X 2000 MM
DESCRIPTION: MAX. PANEL HEIGHT 45 MM, PRESSURE WITH IDLE WHEELS, PANEL SUPPORT GUIDES, NO. PANEL SIZING / MILLING UNITS 1 UNIT PRE-MILLING UNIT, EDGE COIL MAGAZINE, GLUE POT FOR HOT MELT GLUE, NO. EDGE PROCESSING UNITS 6 PROCESSING UNIT END TRIMMING UNIT, PROCESSING UNIT FINE TRIMMING UNIT TO TRIM AND ROUND, PROCESSING UNIT CORNER ROUNDING UNIT, PROCESSING UNIT EDGE SCRAPING UNIT, PROCESSING UNIT GLUE SCRAPING UNIT, PROCESSING UNIT BUFFING UNIT, SAFETY STANDARD CE MARK
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land--machine in stock
-after reviewing the technical
-vg condition

technical parameters:

-adhesive glue tank granules
-shaft with the adhesive on the disc

-guillotine pre-cutting,
-adjustable pressure rollers

-power saw cutting excess fringes
-trimming excess edges, wyokoobrotowe mills, straight from the phase i in radius
-power scraper planes profile-clearance
-buffing

-the thickness of the workpieces 10-60 mm
-thickness of edging 0.4-5 mm
-the minimum width of the workpieces 65 mm

-feed 9 m/min
-demand electricity 5.8 kw
-demand compressed air 6 bar -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VG CONDITION TECHNICAL PARAMETERS: -ADHESIVE GLUE TANK GRANULES -SHAFT WITH THE ADHESIVE ON THE DISC -GUILLOTINE PRE-CUTTING, -ADJUSTABLE PRESSURE ROLLERS -POWER SAW CUTTING EXCESS FRINGES -TRIMMING EXCESS EDGES, WYOKOOBROTOWE MILLS, STRAIGHT FROM THE PHASE I IN RADIUS -POWER SCRAPER PLANES PROFILE-CLEARANCE -BUFFING -THE THICKNESS OF THE WORKPIECES 10-60 MM -THICKNESS OF EDGING 0.4-5 MM -THE MINIMUM WIDTH OF THE WORKPIECES 65 MM -FEED 9 M/MIN -DEMAND ELECTRICITY 5.8 KW -DEMAND COMPRESSED AIR 6 BAR " MACHINE OVERALL DIMENSIONS: -LENGTH: 3200 MM -WIDTH: 1100 MM -HEIGHT: 1600 MM -WEIGHT 660KG
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-crane magnet, lifting magnet, lifting magnet, lifting magnet, round magnet, scrap lifting magnet, scrap magnet<br /><br />-electric magnet<br />-with control new<br />-max lifting power 12,000 kg<br />-crane magnet dimensions 1020 / h500 mm<br />-eigen weight 1114 kg<br />-cabinet dimensions 1100/350 / h1090 mm<br />-weight 150 kg CRANE MAGNET, LIFTING MAGNET, LIFTING MAGNET, LIFTING MAGNET, ROUND MAGNET, SCRAP LIFTING MAGNET, SCRAP MAGNET

-ELECTRIC MAGNET
-WITH CONTROL NEW
-MAX LIFTING POWER 12,000 KG
-CRANE MAGNET DIMENSIONS 1020 / H500 MM
-EIGEN WEIGHT 1114 KG
-CABINET DIMENSIONS 1100/350 / H1090 MM
-WEIGHT 150 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land--machine in stock
-made in germany
-a known, reputable brand brandt

-year of manufacture 1996
-low cabin

technical specifications

-the thickness of the edge of 0.4-12 mm
-the thickness of the workpiece 10-55 mm
-the width of the workpiece – minimum 65 mm

-to review

-total power 9 kw
-feed rate 13 m/min

-cut the ball in
-up/down mill
-scraper plane

-making corners
-polishing machines

overall dimensions of the machine:

-length of 520 cm

width 100 cm

-height 185 cm
-weight approx. 2000 kg

-MACHINE IN STOCK -MADE IN GERMANY -A KNOWN, REPUTABLE BRAND BRANDT -YEAR OF MANUFACTURE 1996 -LOW CABIN TECHNICAL SPECIFICATIONS -THE THICKNESS OF THE EDGE OF 0.4-12 MM -THE THICKNESS OF THE WORKPIECE 10-55 MM -THE WIDTH OF THE WORKPIECE – MINIMUM 65 MM -TO REVIEW -TOTAL POWER 9 KW -FEED RATE 13 M/MIN -CUT THE BALL IN -UP/DOWN MILL -SCRAPER PLANE -MAKING CORNERS -POLISHING MACHINES OVERALL DIMENSIONS OF THE MACHINE: -LENGTH OF 520 CM WIDTH 100 CM -HEIGHT 185 CM -WEIGHT APPROX. 2000 KG
Vendedor: StanDrew
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-weight approx.: 140 kg<br/>dimensions (l x w x h) approx.: 1500 x 800 x 1500 mm<br/>description: motorized inclined conveyor belt for scraps WEIGHT APPROX.: 140 KG
DIMENSIONS (L X W X H) APPROX.: 1500 X 800 X 1500 MM
DESCRIPTION: MOTORIZED INCLINED CONVEYOR BELT FOR SCRAPS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-edgebander atila scm

-machine in stock
-after reviewing the technical
-vg condition

-year 2011
-ce mark

technical parameters:

-the maximum height of the wrapping element of 10 mm-55 mm
-the minimum material length: 140 mm

-feed 9 m/min
– manual height adjustment

-tank with adhesive
– the distemper-granules

-plate to the tape
-tape dispenser

-guillotine-pre cut veneers
-3 pressure rollers
-ball-cut veneers on front-back
-units for shaping edges (radial milling cutters)

scraper planes-to remove excess glue
polishing machines-the perfect smooth crown

-suitable for edging pvc/abs
-equipped with a cloth inside a element

-total power 6.1 kw
-power 3-phase
-intake air 6-8 atmospheres

machine overall dimensions:

-the length of the 3300mm
-width: 1200 mm
-height 1600 mm

-weight 1000 kg

-the machine is not painted
-very good condition

-exceptional strength, edge processing, which involves implementing rational and perfect finishing different profiles working in one pass EDGEBANDER ATILA SCM -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VG CONDITION -YEAR 2011 -CE MARK TECHNICAL PARAMETERS: -THE MAXIMUM HEIGHT OF THE WRAPPING ELEMENT OF 10 MM-55 MM -THE MINIMUM MATERIAL LENGTH: 140 MM -FEED 9 M/MIN – MANUAL HEIGHT ADJUSTMENT -TANK WITH ADHESIVE – THE DISTEMPER-GRANULES -PLATE TO THE TAPE -TAPE DISPENSER -GUILLOTINE-PRE CUT VENEERS -3 PRESSURE ROLLERS -BALL-CUT VENEERS ON FRONT-BACK -UNITS FOR SHAPING EDGES (RADIAL MILLING CUTTERS) SCRAPER PLANES-TO REMOVE EXCESS GLUE POLISHING MACHINES-THE PERFECT SMOOTH CROWN -SUITABLE FOR EDGING PVC/ABS -EQUIPPED WITH A CLOTH INSIDE A ELEMENT -TOTAL POWER 6.1 KW -POWER 3-PHASE -INTAKE AIR 6-8 ATMOSPHERES MACHINE OVERALL DIMENSIONS: -THE LENGTH OF THE 3300MM -WIDTH: 1200 MM -HEIGHT 1600 MM -WEIGHT 1000 KG -THE MACHINE IS NOT PAINTED -VERY GOOD CONDITION -EXCEPTIONAL STRENGTH, EDGE PROCESSING, WHICH INVOLVES IMPLEMENTING RATIONAL AND PERFECT FINISHING DIFFERENT PROFILES WORKING IN ONE PASS
Vendedor: StanDrew
Año de construcción: usado
Precio: used machinery auction RESALE 250 €
Ubicación: Land-weight approx.: 500 kg<br/>dimensions (l x w x h) approx.: 10500 x 800 x 2600 mm<br/>snipping unit: ja/yes <br/>flat scraping unit: ja/yes <br/>edge buffing unit: ja/yes <br/>description: material thickness: roll material 3mm,<br> edges 20 x 60 mm,<br> join,dome,flush milling top bottom,<br> chamfer milling, scraper,<br> subsequently mounted buffing and polishing<br> with cleaning fluid.<br> WEIGHT APPROX.: 500 KG
DIMENSIONS (L X W X H) APPROX.: 10500 X 800 X 2600 MM
SNIPPING UNIT: JA/YES
FLAT SCRAPING UNIT: JA/YES
EDGE BUFFING UNIT: JA/YES
DESCRIPTION: MATERIAL THICKNESS: ROLL MATERIAL 3MM,
EDGES 20 X 60 MM,
JOIN,DOME,FLUSH MILLING TOP BOTTOM,
CHAMFER MILLING, SCRAPER,
SUBSEQUENTLY MOUNTED BUFFING AND POLISHING
WITH CLEANING FLUID.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-
edge bander scm holzkraft me 35 preliminary milling

easy to use with all optional equipment: edge bander me 35, oklejaniem corners, also with oklejaniem solid wood strips to a thickness of 5 mm, it offers the best performance in okleiniarkach at this level.

these features, combined ease of use make me 35 the ideal machine for the companies manufacturing furniture.

advantages:

panel system: designed for a perfect finish. the best finish is guaranteed by a team move, which prevents the influence of feed rate on the covering, ensuring smooth movement of the disc.

an adhesive:

excellent performance when used with all types of wood. allows you to stick panels heights from 8 to 50 mm: a true record in its category!

high-frequency motors:

maximum reliability and accuracy. these motors provide the optimal level of trim. in addition, the lack of tape or other conventional propulsion systems prevents the effect of vibration on the quality of the finish.

access to all units.

precise and easy to use: one hand wheel with a numeric readout raises and leaves the pressure by allowing the automatic positioning of operating units depending on the thickness of the plate.

pre-milling unit (diamond cutter)
    power cutting front
    glue unit
    indexing roller team
    cutting unit 2 balls
    top-down milling unit
    unit radial scraper planes
    electrical adhesive scraper planes

manufacturer: holzkraft
technical data
veneer thickness 0.4-3 mm
max. the thickness of the veneer (tape) 5 mm
min. ÷ max. the height of the panel 8 ÷ 50 mm
min length/width panel 190/110 mm
feed speed 7 m/min
weight 540 kg EDGE BANDER SCM HOLZKRAFT ME 35 PRELIMINARY MILLING EASY TO USE WITH ALL OPTIONAL EQUIPMENT: EDGE BANDER ME 35, OKLEJANIEM CORNERS, ALSO WITH OKLEJANIEM SOLID WOOD STRIPS TO A THICKNESS OF 5 MM, IT OFFERS THE BEST PERFORMANCE IN OKLEINIARKACH AT THIS LEVEL. THESE FEATURES, COMBINED EASE OF USE MAKE ME 35 THE IDEAL MACHINE FOR THE COMPANIES MANUFACTURING FURNITURE. ADVANTAGES: PANEL SYSTEM: DESIGNED FOR A PERFECT FINISH. THE BEST FINISH IS GUARANTEED BY A TEAM MOVE, WHICH PREVENTS THE INFLUENCE OF FEED RATE ON THE COVERING, ENSURING SMOOTH MOVEMENT OF THE DISC. AN ADHESIVE: EXCELLENT PERFORMANCE WHEN USED WITH ALL TYPES OF WOOD. ALLOWS YOU TO STICK PANELS HEIGHTS FROM 8 TO 50 MM: A TRUE RECORD IN ITS CATEGORY! HIGH-FREQUENCY MOTORS: MAXIMUM RELIABILITY AND ACCURACY. THESE MOTORS PROVIDE THE OPTIMAL LEVEL OF TRIM. IN ADDITION, THE LACK OF TAPE OR OTHER CONVENTIONAL PROPULSION SYSTEMS PREVENTS THE EFFECT OF VIBRATION ON THE QUALITY OF THE FINISH. ACCESS TO ALL UNITS. PRECISE AND EASY TO USE: ONE HAND WHEEL WITH A NUMERIC READOUT RAISES AND LEAVES THE PRESSURE BY ALLOWING THE AUTOMATIC POSITIONING OF OPERATING UNITS DEPENDING ON THE THICKNESS OF THE PLATE. PRE-MILLING UNIT (DIAMOND CUTTER) POWER CUTTING FRONT GLUE UNIT INDEXING ROLLER TEAM CUTTING UNIT 2 BALLS TOP-DOWN MILLING UNIT UNIT RADIAL SCRAPER PLANES ELECTRICAL ADHESIVE SCRAPER PLANES MANUFACTURER: HOLZKRAFT TECHNICAL DATA VENEER THICKNESS 0.4-3 MM MAX. THE THICKNESS OF THE VENEER (TAPE) 5 MM MIN. ÷ MAX. THE HEIGHT OF THE PANEL 8 ÷ 50 MM MIN LENGTH/WIDTH PANEL 190/110 MM FEED SPEED 7 M/MIN WEIGHT 540 KG
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-internal diameter:250 mm<br/>grinding depth: mm<br/>swing diameter:455 mm<br/>workpiece length - max.:1200 mm<br/>table rotating:-4/+8 °<br/>table speeds:0-4000 mm/min<br/>max. workpiece weight:80 kg<br/>workhead - center taper:5 mk<br/>rotation speed of workhead :0 - 400 1/min<br/>workhead motor:4 kw<br/>3-jaw chuck:250 (selbstschließend) mm<br/>grinding motor:4 kw<br/>coolant pump:2,2 kw<br/>weight approx.:2,4 t<br/>machine dimensions:3200 x 2100 mm<br/>cnc controller:siemens 840 d oder sps von siemens <br/>servo motors: <br/>autom. sensing device for grinding wheel:option <br/>: <br/>linear scales and ballscrew:in allen achsen <br/>grinding wheel dresser: <br/>: <br/>fully enclosed: <br/>: <br/>technical documentation in german language: <br/>ce-design: <br/>signal lamp: <br/>face grinding attachement:durchmesser 125 mm<br/>clamping chuck:250 (selbstschließend), 1 satz harte backen, 1 satz weiche backen, 1 satz innen mm<br/>: <br/>magnetic and paper filter : <br/>levellig elements: <br/>frequency control main spindel engine:für die innenschleifeinrichtung <br/>internal grinding spindle:rpm 28.000, diam. 60 mm. min. diam. cap. 25 mm. x bohrung 50 mm, max. diam. cap. 100 mm. x bohrung 115 mm . <br/>internal grinding spindle:rpm 10.000, diam. 100 mm, min. diam. cap. 50 mm x bohrung 100 mm, max.diam. cap. 250 mm xbohrung 220 mm <br/>fixed steady rests:10-100 mm, 100-170 mm <br/><br/> performance and precision degree   robbi grinding machines are according to the international precision normes iso 2433. the table movement linearity is guaranteed by a max. deviation of  0,002 mm/mt.  the obtainable grinding roundness is :  0,4m (**)  (**)  for a test workpiece ground in our factory during machine testing        the cnc controls :  wheel head movement  (axis x) longitudinal table movement  (axis z) work head spindle rotation speed    the available programs permit the programming of the following grinding cycles  plunge  cylindrical pass   cylindrical pass with interpolation between table and wheel movement to grind taper workpieces radius   the software for the workpiece grinding operation is very simple and intuitive.   to facilitate the programming the software is equipped with an exemplifying graphics, to input the data for each parameter.      the software, has been specially studied, so as to permit also non specialised operators to programme without any problems complex workpieces.   when the workpiece grinding programme has been completed the cnc will automatically make up a summary list, where only the geometric parameters are evidenced.     this list permits with a  glance to verify the complete programme;  this operation is very helpful to verify eventual input data errors or to check rapidly a workpiece programme when reloaded from the file.        while the programme is in execution, it is possible to intervene and modify in real time the technologic parameters, such as:  increments, dwell inversion times, sparkout passes.   also, it is possible to intervene with the jog handwheel.      the grinding machine is composed of :    base  structure in normalised and stabilised cast iron with large ground guides.    the lubrication plant supplies a constant oil flow distributed over the complete length of the guides.    in the middle of the base, there is positioned the ball screw  for the table longitudinal movement.    on all the lower part of the perimeter are situated the recesses for machine levelling.  considering the base structure, usually a foundation is not required.    table   the table is manufactured in two parts, both are in normalised and stabilised cast iron.     the lower  part is composed of wide guides which are ground and accurately hand scrapped, for a better sliding.       the upper part, is swivelable in the two directions, suitable for grinding tapered workpieces.    it includes  a micrometric device with centesimal dial gauge for taper control.       workhead  the structure in normalised, stabilised and well ribbed cast iron, allows to support the workpiece weight and the force generated by the grinding operation.      the spindle rotates on high precision ball bearings, guaranteeing restricted tolerance and maximum rigidity in the working.      the spindle rotation is by means of a three phase motor with variable speed controlled by an inverter.  internal grinding spindle carriage  the structure is composed of a carriage, where the internal grinding spindle is located.    the working feed, is obtained by a re-circulating ball screw and preloaded nut.    the screw movement is assured by a brushless motor.       the incremental optic rule guarantees a wheelhead positioning precision of 0,001 mm.   internal grinding spindle  as there are many and various types of internal grinding spindles, according to the diameters and lengths that need to be ground, the machine is supplied without an internal grinding spindle, so that the customer may select which type is more suitable for his job.      the machine is manufactured standard with a belt transmission suitable for diam. mm. 60, diam. mm. 80 and diam. mm. 100 internal grinding spindles.      on request,  high frequency spindles may be assembled.   wheelhead  for face grinding the structure is composed of a carriage, where the face grinding device is located.    the positioning is obtained by an hydraulic cylinder.   the diamond dressing device is assembled on the face grinding device casing.   manual feed handwheels  electronic type, with double selection of the increments division 0.1 - 0.01 and 0.001 mm.  for wheelhead and table movements.     diamond dresser  the internal diamond dressing device is very strong and is positioned on the table.     it starts  hydraulically, when the dressing operation is selected, by the operator.     the dressing operation may be carried out manually or in automatic cycle.    equipment and electrical plant  in a cooled cabinet, separate from the machine.      hydraulic plant   the hydraulic power pack, is separate from the machine and activates the hydraulic diamond dresser and face grinding device.       lubrication plant the lubrication power pack, is separate from the machine and supplies continuous oil to the wheelhead guides.   the recovered oil is filtered and then resent to the power pack.     the re-circulating ball screw nut for the working feed, is grease lubricated.           coolant plant  large capacity tank for the coolant water, complete with electric equipment.       equipped with coolant magnet cleaner  and coolant paper roll cleaner.       protections  for the protection of the operator all movable parts are covered with suitable guards.     precisely: protection casing for belts, protection casing for grinding wheel and bellows for guides.   the machine is completely closed and the front protection is a sheet sliding doors with poly-carbonate shields.   a safety device, does not permit the automatic cycle to start if the front sliding doors are open.   INTERNAL DIAMETER:250 MM
GRINDING DEPTH: MM
SWING DIAMETER:455 MM
WORKPIECE LENGTH - MAX.:1200 MM
TABLE ROTATING:-4/+8 °
TABLE SPEEDS:0-4000 MM/MIN
MAX. WORKPIECE WEIGHT:80 KG
WORKHEAD - CENTER TAPER:5 MK
ROTATION SPEED OF WORKHEAD :0 - 400 1/MIN
WORKHEAD MOTOR:4 KW
3-JAW CHUCK:250 (SELBSTSCHLIEßEND) MM
GRINDING MOTOR:4 KW
COOLANT PUMP:2,2 KW
WEIGHT APPROX.:2,4 T
MACHINE DIMENSIONS:3200 X 2100 MM
CNC CONTROLLER:SIEMENS 840 D ODER SPS VON SIEMENS
SERVO MOTORS:
AUTOM. SENSING DEVICE FOR GRINDING WHEEL:OPTION
:
LINEAR SCALES AND BALLSCREW:IN ALLEN ACHSEN
GRINDING WHEEL DRESSER:
:
FULLY ENCLOSED:
:
TECHNICAL DOCUMENTATION IN GERMAN LANGUAGE:
CE-DESIGN:
SIGNAL LAMP:
FACE GRINDING ATTACHEMENT:DURCHMESSER 125 MM
CLAMPING CHUCK:250 (SELBSTSCHLIEßEND), 1 SATZ HARTE BACKEN, 1 SATZ WEICHE BACKEN, 1 SATZ INNEN MM
:
MAGNETIC AND PAPER FILTER :
LEVELLIG ELEMENTS:
FREQUENCY CONTROL MAIN SPINDEL ENGINE:FüR DIE INNENSCHLEIFEINRICHTUNG
INTERNAL GRINDING SPINDLE:RPM 28.000, DIAM. 60 MM. MIN. DIAM. CAP. 25 MM. X BOHRUNG 50 MM, MAX. DIAM. CAP. 100 MM. X BOHRUNG 115 MM .
INTERNAL GRINDING SPINDLE:RPM 10.000, DIAM. 100 MM, MIN. DIAM. CAP. 50 MM X BOHRUNG 100 MM, MAX.DIAM. CAP. 250 MM XBOHRUNG 220 MM
FIXED STEADY RESTS:10-100 MM, 100-170 MM

PERFORMANCE AND PRECISION DEGREE ROBBI GRINDING MACHINES ARE ACCORDING TO THE INTERNATIONAL PRECISION NORMES ISO 2433. THE TABLE MOVEMENT LINEARITY IS GUARANTEED BY A MAX. DEVIATION OF 0,002 MM/MT. THE OBTAINABLE GRINDING ROUNDNESS IS : 0,4M (**) (**) FOR A TEST WORKPIECE GROUND IN OUR FACTORY DURING MACHINE TESTING THE CNC CONTROLS : WHEEL HEAD MOVEMENT (AXIS X) LONGITUDINAL TABLE MOVEMENT (AXIS Z) WORK HEAD SPINDLE ROTATION SPEED THE AVAILABLE PROGRAMS PERMIT THE PROGRAMMING OF THE FOLLOWING GRINDING CYCLES PLUNGE CYLINDRICAL PASS CYLINDRICAL PASS WITH INTERPOLATION BETWEEN TABLE AND WHEEL MOVEMENT TO GRIND TAPER WORKPIECES RADIUS THE SOFTWARE FOR THE WORKPIECE GRINDING OPERATION IS VERY SIMPLE AND INTUITIVE. TO FACILITATE THE PROGRAMMING THE SOFTWARE IS EQUIPPED WITH AN EXEMPLIFYING GRAPHICS, TO INPUT THE DATA FOR EACH PARAMETER. THE SOFTWARE, HAS BEEN SPECIALLY STUDIED, SO AS TO PERMIT ALSO NON SPECIALISED OPERATORS TO PROGRAMME WITHOUT ANY PROBLEMS COMPLEX WORKPIECES. WHEN THE WORKPIECE GRINDING PROGRAMME HAS BEEN COMPLETED THE CNC WILL AUTOMATICALLY MAKE UP A SUMMARY LIST, WHERE ONLY THE GEOMETRIC PARAMETERS ARE EVIDENCED. THIS LIST PERMITS WITH A GLANCE TO VERIFY THE COMPLETE PROGRAMME; THIS OPERATION IS VERY HELPFUL TO VERIFY EVENTUAL INPUT DATA ERRORS OR TO CHECK RAPIDLY A WORKPIECE PROGRAMME WHEN RELOADED FROM THE FILE. WHILE THE PROGRAMME IS IN EXECUTION, IT IS POSSIBLE TO INTERVENE AND MODIFY IN REAL TIME THE TECHNOLOGIC PARAMETERS, SUCH AS: INCREMENTS, DWELL INVERSION TIMES, SPARKOUT PASSES. ALSO, IT IS POSSIBLE TO INTERVENE WITH THE JOG HANDWHEEL. THE GRINDING MACHINE IS COMPOSED OF : BASE STRUCTURE IN NORMALISED AND STABILISED CAST IRON WITH LARGE GROUND GUIDES. THE LUBRICATION PLANT SUPPLIES A CONSTANT OIL FLOW DISTRIBUTED OVER THE COMPLETE LENGTH OF THE GUIDES. IN THE MIDDLE OF THE BASE, THERE IS POSITIONED THE BALL SCREW FOR THE TABLE LONGITUDINAL MOVEMENT. ON ALL THE LOWER PART OF THE PERIMETER ARE SITUATED THE RECESSES FOR MACHINE LEVELLING. CONSIDERING THE BASE STRUCTURE, USUALLY A FOUNDATION IS NOT REQUIRED. TABLE THE TABLE IS MANUFACTURED IN TWO PARTS, BOTH ARE IN NORMALISED AND STABILISED CAST IRON. THE LOWER PART IS COMPOSED OF WIDE GUIDES WHICH ARE GROUND AND ACCURATELY HAND SCRAPPED, FOR A BETTER SLIDING. THE UPPER PART, IS SWIVELABLE IN THE TWO DIRECTIONS, SUITABLE FOR GRINDING TAPERED WORKPIECES. IT INCLUDES A MICROMETRIC DEVICE WITH CENTESIMAL DIAL GAUGE FOR TAPER CONTROL. WORKHEAD THE STRUCTURE IN NORMALISED, STABILISED AND WELL RIBBED CAST IRON, ALLOWS TO SUPPORT THE WORKPIECE WEIGHT AND THE FORCE GENERATED BY THE GRINDING OPERATION. THE SPINDLE ROTATES ON HIGH PRECISION BALL BEARINGS, GUARANTEEING RESTRICTED TOLERANCE AND MAXIMUM RIGIDITY IN THE WORKING. THE SPINDLE ROTATION IS BY MEANS OF A THREE PHASE MOTOR WITH VARIABLE SPEED CONTROLLED BY AN INVERTER. INTERNAL GRINDING SPINDLE CARRIAGE THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE INTERNAL GRINDING SPINDLE IS LOCATED. THE WORKING FEED, IS OBTAINED BY A RE-CIRCULATING BALL SCREW AND PRELOADED NUT. THE SCREW MOVEMENT IS ASSURED BY A BRUSHLESS MOTOR. THE INCREMENTAL OPTIC RULE GUARANTEES A WHEELHEAD POSITIONING PRECISION OF 0,001 MM. INTERNAL GRINDING SPINDLE AS THERE ARE MANY AND VARIOUS TYPES OF INTERNAL GRINDING SPINDLES, ACCORDING TO THE DIAMETERS AND LENGTHS THAT NEED TO BE GROUND, THE MACHINE IS SUPPLIED WITHOUT AN INTERNAL GRINDING SPINDLE, SO THAT THE CUSTOMER MAY SELECT WHICH TYPE IS MORE SUITABLE FOR HIS JOB. THE MACHINE IS MANUFACTURED STANDARD WITH A BELT TRANSMISSION SUITABLE FOR DIAM. MM. 60, DIAM. MM. 80 AND DIAM. MM. 100 INTERNAL GRINDING SPINDLES. ON REQUEST, HIGH FREQUENCY SPINDLES MAY BE ASSEMBLED. WHEELHEAD FOR FACE GRINDING THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE FACE GRINDING DEVICE IS LOCATED. THE POSITIONING IS OBTAINED BY AN HYDRAULIC CYLINDER. THE DIAMOND DRESSING DEVICE IS ASSEMBLED ON THE FACE GRINDING DEVICE CASING. MANUAL FEED HANDWHEELS ELECTRONIC TYPE, WITH DOUBLE SELECTION OF THE INCREMENTS DIVISION 0.1 - 0.01 AND 0.001 MM. FOR WHEELHEAD AND TABLE MOVEMENTS. DIAMOND DRESSER THE INTERNAL DIAMOND DRESSING DEVICE IS VERY STRONG AND IS POSITIONED ON THE TABLE. IT STARTS HYDRAULICALLY, WHEN THE DRESSING OPERATION IS SELECTED, BY THE OPERATOR. THE DRESSING OPERATION MAY BE CARRIED OUT MANUALLY OR IN AUTOMATIC CYCLE. EQUIPMENT AND ELECTRICAL PLANT IN A COOLED CABINET, SEPARATE FROM THE MACHINE. HYDRAULIC PLANT THE HYDRAULIC POWER PACK, IS SEPARATE FROM THE MACHINE AND ACTIVATES THE HYDRAULIC DIAMOND DRESSER AND FACE GRINDING DEVICE. LUBRICATION PLANT THE LUBRICATION POWER PACK, IS SEPARATE FROM THE MACHINE AND SUPPLIES CONTINUOUS OIL TO THE WHEELHEAD GUIDES. THE RECOVERED OIL IS FILTERED AND THEN RESENT TO THE POWER PACK. THE RE-CIRCULATING BALL SCREW NUT FOR THE WORKING FEED, IS GREASE LUBRICATED. COOLANT PLANT LARGE CAPACITY TANK FOR THE COOLANT WATER, COMPLETE WITH ELECTRIC EQUIPMENT. EQUIPPED WITH COOLANT MAGNET CLEANER AND COOLANT PAPER ROLL CLEANER. PROTECTIONS FOR THE PROTECTION OF THE OPERATOR ALL MOVABLE PARTS ARE COVERED WITH SUITABLE GUARDS. PRECISELY: PROTECTION CASING FOR BELTS, PROTECTION CASING FOR GRINDING WHEEL AND BELLOWS FOR GUIDES. THE MACHINE IS COMPLETELY CLOSED AND THE FRONT PROTECTION IS A SHEET SLIDING DOORS WITH POLY-CARBONATE SHIELDS. A SAFETY DEVICE, DOES NOT PERMIT THE AUTOMATIC CYCLE TO START IF THE FRONT SLIDING DOORS ARE OPEN.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-edgebander atilla-scm

-in stock, after the technical review
-very good condition, dtr
-year 2011

technical parameters:

-the maximum height of the wrapping element of 10 mm-55 mm
-the minimum material length: 140 mm

-feed 9 m/min
– manual height adjustment

-tank with adhesive
– the distemper-granules

-guillotine-pre cut veneers
-3 pressure rollers
-ball-cut veneers on front-back
-units for shaping edges (radial milling cutters)

scraper planes-to remove excess glue
polishing machines-the perfect smooth crown

-suitable for edging pvc/abs
-equipped with a cloth inside a element

-total power 6.1 kw
-power 3-phase
-intake air 6-8 atmospheres

-plate to the tape
-tape dispenser

overall dimensions:

-the length of the 3300mm with a
-width: 1200 mm
-height 1600 mm

-weight 1000 kg EDGEBANDER ATILLA-SCM -IN STOCK, AFTER THE TECHNICAL REVIEW -VERY GOOD CONDITION, DTR -YEAR 2011 TECHNICAL PARAMETERS: -THE MAXIMUM HEIGHT OF THE WRAPPING ELEMENT OF 10 MM-55 MM -THE MINIMUM MATERIAL LENGTH: 140 MM -FEED 9 M/MIN – MANUAL HEIGHT ADJUSTMENT -TANK WITH ADHESIVE – THE DISTEMPER-GRANULES -GUILLOTINE-PRE CUT VENEERS -3 PRESSURE ROLLERS -BALL-CUT VENEERS ON FRONT-BACK -UNITS FOR SHAPING EDGES (RADIAL MILLING CUTTERS) SCRAPER PLANES-TO REMOVE EXCESS GLUE POLISHING MACHINES-THE PERFECT SMOOTH CROWN -SUITABLE FOR EDGING PVC/ABS -EQUIPPED WITH A CLOTH INSIDE A ELEMENT -TOTAL POWER 6.1 KW -POWER 3-PHASE -INTAKE AIR 6-8 ATMOSPHERES -PLATE TO THE TAPE -TAPE DISPENSER OVERALL DIMENSIONS: -THE LENGTH OF THE 3300MM WITH A -WIDTH: 1200 MM -HEIGHT 1600 MM -WEIGHT 1000 KG
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-grinding diameter:630 mm<br/>grinding length:3000 mm<br/>centre height:320 mm<br/>table speed -stepless-:0,005-5 m/min<br/>min/max. table longitudinal travel:5/ 3350 mm<br/>table speeds:8 m/min<br/>grinding spindle- cross travel:420 mm<br/>workpiece-spindlehead motor:3,0 kw<br/>output of wheelhead motor:22 kw<br/>motor internal grinding:3 kw<br/>lubrication pump motor:0,11 kw<br/>weight of the machine ca.:15700 kg<br/>dimensions of the machine ca.:h1970/b3100/l12650 mm<br/>technical documentation: <br/>wheel flange suspension: <br/>luminating devices: <br/>work piece drivers: <br/>work piece driver 110 - 160 mm: <br/>wheel dresser fitted on the tale stock: <br/>splash gurads: <br/>complete sedimentation cooling equipment: <br/>open tailstocks dia 250 mm: <br/>centers morse 6: <br/>changing belt for used grinding wheel: <br/>balancing mandrel: <br/>extractor for grinding wheel flange: <br/>grinding wheel cover dia. 800 mm: <br/>grinding wheel flange for wheel width 63 - 100 mm: <br/>grinding wheel 750 x 100 x 305 mm: <br/><br/>40 % advance payment, by order confirmation 60 % before loading the machine  warranty: 12 month  one general overhauled cylindrical grinding machine, make tos,  type but/buc 63 x 3000 with new 2-axis cnc teach in control k 51/2 or alternatively siemens sinumerik 840 d.  our general overhauling includes: regrinding and scraping of all guide ways including lower and upper side of the table. replacement of all main components. complete new electric including cabinet according to \ GRINDING DIAMETER:630 MM
GRINDING LENGTH:3000 MM
CENTRE HEIGHT:320 MM
TABLE SPEED -STEPLESS-:0,005-5 M/MIN
MIN/MAX. TABLE LONGITUDINAL TRAVEL:5/ 3350 MM
TABLE SPEEDS:8 M/MIN
GRINDING SPINDLE- CROSS TRAVEL:420 MM
WORKPIECE-SPINDLEHEAD MOTOR:3,0 KW
OUTPUT OF WHEELHEAD MOTOR:22 KW
MOTOR INTERNAL GRINDING:3 KW
LUBRICATION PUMP MOTOR:0,11 KW
WEIGHT OF THE MACHINE CA.:15700 KG
DIMENSIONS OF THE MACHINE CA.:H1970/B3100/L12650 MM
TECHNICAL DOCUMENTATION:
WHEEL FLANGE SUSPENSION:
LUMINATING DEVICES:
WORK PIECE DRIVERS:
WORK PIECE DRIVER 110 - 160 MM:
WHEEL DRESSER FITTED ON THE TALE STOCK:
SPLASH GURADS:
COMPLETE SEDIMENTATION COOLING EQUIPMENT:
OPEN TAILSTOCKS DIA 250 MM:
CENTERS MORSE 6:
CHANGING BELT FOR USED GRINDING WHEEL:
BALANCING MANDREL:
EXTRACTOR FOR GRINDING WHEEL FLANGE:
GRINDING WHEEL COVER DIA. 800 MM:
GRINDING WHEEL FLANGE FOR WHEEL WIDTH 63 - 100 MM:
GRINDING WHEEL 750 X 100 X 305 MM:

40 % ADVANCE PAYMENT, BY ORDER CONFIRMATION 60 % BEFORE LOADING THE MACHINE WARRANTY: 12 MONTH ONE GENERAL OVERHAULED CYLINDRICAL GRINDING MACHINE, MAKE TOS, TYPE BUT/BUC 63 X 3000 WITH NEW 2-AXIS CNC TEACH IN CONTROL K 51/2 OR ALTERNATIVELY SIEMENS SINUMERIK 840 D. OUR GENERAL OVERHAULING INCLUDES: REGRINDING AND SCRAPING OF ALL GUIDE WAYS INCLUDING LOWER AND UPPER SIDE OF THE TABLE. REPLACEMENT OF ALL MAIN COMPONENTS. COMPLETE NEW ELECTRIC INCLUDING CABINET ACCORDING TO \"CE\". COMPLETE NEW PAINT (2 COLORS), 48 HOURS TEST RUN. WE GUARANTEE NEW MACHINE ACCURACY, TECHNICAL AND OPTICAL EXECUTION LIKE NEW WITH 12 MONTHS FULL WARRANTY.
Vendedor: GK Werkzeugmaschinen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more types: