6 ofertas

Año de construcción: usado
Ubicación: Land-used, year 2001.

ima avantage is 8200 a single-sided automatic edge shipping glue and finishing machine

in law execution
edge gluing with synthetic resin hot melt adhesive

technical data:
edging material:
a) veneer / coils and strips
b) plastic / coils and strips
c) solid wood mouldings
= edge height approx. 14-55 mm
edge thickness = approx. 0.4 20 mm
plate thickness = approx. 10-50 mm
min. panel width = 60 mm
min. panel length = 150 mm
max edge cross section:
-bar = approx. 20 x 50 mm
-pvc = approx. 3 x 55 mm
plates recusal from
the chain conveyor = 35 mm
drive for speed of
8-20 m / min, mech. infinitely variable

feed speed 4-20 m / min.

imatronic 121 with system software - integrated software plc replaced separate programmable machine controller
programming largely s5 compatible
-integrated control with maximum 64 routes features

486-compact pc industrial design with front panel (protection class ip 65),
hard disk 200 mb (minimum), ram 4 mb
floppy drive 3â½ "1.44 mb, screen color lcd

trimming unit 08.376
formatted to the edges after milling/calibration
workpieces or for milling of lateral grooves.
profiles, or folding
with 2 motors a 3.0 kw, 12000 rpm, 200 hz,
motor 1 in the tracking and motor 2 in the opposite direction working,

spotlight 300 lg, 1,5 kw, to the
preheating the workpiece edge

gluing unit 283.1513, straight edge 3 mm + bars

min. length of strip - simple/multiple roller 150 mm
min bar length 300 mm
min. strip height 14 mm
strip height 50 mm
maximum bar length at high hood 1200 mm

gluing unit designed for the pure mode,.

glue specification 0.8 l for pur glue
compl. m. cartridge & connectors

before melting pan approx. 1 l
regulated with a heating capacity 3 x 400 w

08.421, 2 motors, the top pressure mounted end-trimming unit
to the caps of the front and rear edges or edges overhang.
for caps cuts flush or with a chamfer, with 2 hm - cap saw blade 160 x 22 mm z = 48
min. plate recusal: approx. 30 mm + max edge or strip thickness
min. panel length: approx. 150 mm
min. distance between 2 pieces approx. 650 mm
maximum working speed: 20 m / min.
front / hinterkantentastschuh aussteuerbar
with 1 motor 660 w, 400 v, 200 hz, 12000 rpm,.
max edge height 55 mm maximum edge thickness 20 mm
static frequency converter for motors
> 0.75 to 1.5 kw, incl. filter and braking resistor mains connection 3-phase, 400-480 v, +/-5%, 50/60 hz hor. pneum.. swivel device 0 + 10 â° for caps 08.421 per motor
with pneumatic ausrã¼ckbarer page keying, manually positioned on digital display.

milling unit 08.055 for 2 motors with heights keying, groping at the side,
up to 30 degrees, without tools with mechanical digital display 09 for the horizontal and vertical adjustment with single suction nozzle
before milling from above and below
with 1 motor of 1850 w, 400 v, 200 hz, 12000 rpm
20 degrees tilting working ikl658078 in the opposite direction
static frequency converter for motors > 2.2 to 4.0 kw, incl. filter and braking resistor mains connection 3-phase, 400-480 v, +/-5%, 50/60 hz ikl658648 motor with hsk holder
with side key skid for 1 motor, for the cracks, plate off and profile milling, ikl658805 2 st
linear axis for vertical motor positioning of the height of keying, fine adjustment

2 st pneumatic adjustment of the automatic upgrade at thin / thick edge or decommissioning at last

sound swallowing/guard for compound and 1 milling unit, suction connector 2 x 80 upwards,
locking mechanism according to the regulations of the bg

multiple processing unit 08.346,
to the fine milling and profile milling of the upper longitudinal edge as well as the front and rear edge.
with height and page keying,.
pneumatic feed motion horizontally and vertically.
with manual motor positioning in axle and radial direction via digital display, with 1 motor 660 w, 400 v, 200 hz, 12000 rpm,.
with quick change facility, without any tools, including static frequency converters with automatic brake device. height 235 mm,.
min. workpiece recusal 35 mm + edge thickness min. distance between 2 pieces: approx. 600 mm maximum speed: approx. 16 m / min. min. workpiece thickness at the corners copy 16 mm.

linear axis for horizontal motor positioning of the page scanner for automatic program change (radius - bevel) and fine adjustment at the mfa
with vertical positioning on 2 fixed points for automatic program change (e.g. bar/plastic edge)
 
tool hsk-25r to the copy / cut for r1-r3 only original equipment

multiple processing unit 08.346,
to the fine milling and profile milling the bottom lengthwise edge, as well as the front and rear edge, with height and page scanner,,
pneumatic feed motion horizontally and vertically. with manual motor positioning in
axle and radial direction via digital display, with 1 motor 660 w, 400 v, 200 hz, 12000 rpm,
with quick change facility, without any tools, including static frequency converter,.
with automatic brake device, height 235 mm,.
min. workpiece recusal 35 mm + edge thickness min. distance between 2 pieces: approx. 600 mm maximum speed: approx. 16 m / min.
min. werkstã¼ckdick corners copying 16 mm.
linear axis for horizontal motor positioning of the page scanner for automatic program change (radius - bevel) and fine adjustment at the mfa
with vertical positioning on 2 fixed points for automatic program change (e.g. bar/plastic edge) ikl0079659 79659 1 st
tool hsk-25r to the copy / cut for r1-r3 only original equipment

sound swallowing/guard with 2 hood suction nozzle ã?100 mm, below the transport chain, length 1200 mm

groove/groove/profile milling unit 08.183,
for cutting through side or bottom grooves, rebates or profiles, 1 motor
flã¤chennuten max to workpiece recusal minus 10 mm, swivel, without keying,
maximum engine power 3 kw without tool
with mechanical digital readout for the horizontal and vertical adjustment
 with 1 motor 3.0 kw, 12000 rpm, 200 hz, kns 51
maximum machining cross-section ca 20 m / min. approx. 70 qmm
working in the tracking
static frequency converter for motors
> 2.2 to 4.0 kw, incl. filter and braking resistor mains connection 3-phase, 400-480 v, +/-5%, 50/60 hz electro-pneumatic control of usage for the groove/groove/profilfrã¤sagg
sound swallowing/guard length 600-1050 mm

course reserve for 1 kantenschleif-unit with pre-wiring

profile scraping unit 08.519
the after scraping a upper and lower machined viertelkreisprofiles on glued on plastic edging materials, with pre-set hm scraper tools.
with height keying, side momentary mechanical digital display 09 for the horizontal and vertical adjustment, with electro-pneumatic horizontal jackshaft device for the upper and lower pulling blades unit with electro-pneumatic vertical release device for the lower unit of scraper
with single suction nozzle.
height 235 mm, min. workpiece thickness 16 mm iklr2 2 st
r = 2 mm
 
1 adjustment axis vertically for the profile scraper 08.519
dust-catching box for profile scraping unit

course reserve for 1 profile scraper with pre-wiring

auto-sensing scraping unit 08.50
to remove hot melt adhesives from the periphery of workpiece upper and subpages, controllable, with 2 cutting plates,
workpiece recusal min with 2 air nozzles to clean blow of the scraper 30 mm

course reserve for detergent indication with pre-wiring

fasschleif/buffing unit 08.612, not oscillating, after cleaning the top and bottom flush milled kantenmateriales or thick edges, polishing pivots on a vertical and horizontal axis
with 2 motors 0.25 kw, 230/400v, 50 hz, 1500 rpm.
with 1 polishing wheel diameter. 40 x 200 x 18
height 235 mm

pneumatic release device for the buffing unit 08.612

1 set of schwabbelscheiben2 st
for the aforementioned buffing unit 08.612 running in sticky-brite
complete with mounts
 
smoothness aggregate 08.53
to smooth the milled and
drawn out pvc/abs profile edge, for r = 1,3-4 mm, 1 upper and 1 lower smoothness zone,
min. workpiece thickness with horizontal pneumatic clutch device 16 mm

machine is still connected and can be seen in operation.
sale from location near stuttgart

the technical description comes from the original-from the manufacturer
 

heavy equipment and machinery and equipment, without warranty.
technical data, year of manufacture and condition no warranty! bought as seen!
subject to prior sale

delivery: from site's terms & conditions apply

USED, YEAR 2001. IMA AVANTAGE IS 8200 A SINGLE-SIDED AUTOMATIC EDGE SHIPPING GLUE AND FINISHING MACHINE IN LAW EXECUTION EDGE GLUING WITH SYNTHETIC RESIN HOT MELT ADHESIVE TECHNICAL DATA: EDGING MATERIAL: A) VENEER / COILS AND STRIPS B) PLASTIC / COILS AND STRIPS C) SOLID WOOD MOULDINGS = EDGE HEIGHT APPROX. 14-55 MM EDGE THICKNESS = APPROX. 0.4 20 MM PLATE THICKNESS = APPROX. 10-50 MM MIN. PANEL WIDTH = 60 MM MIN. PANEL LENGTH = 150 MM MAX EDGE CROSS SECTION: -BAR = APPROX. 20 X 50 MM -PVC = APPROX. 3 X 55 MM PLATES RECUSAL FROM THE CHAIN CONVEYOR = 35 MM DRIVE FOR SPEED OF 8-20 M / MIN, MECH. INFINITELY VARIABLE FEED SPEED 4-20 M / MIN. IMATRONIC 121 WITH SYSTEM SOFTWARE - INTEGRATED SOFTWARE PLC REPLACED SEPARATE PROGRAMMABLE MACHINE CONTROLLER PROGRAMMING LARGELY S5 COMPATIBLE -INTEGRATED CONTROL WITH MAXIMUM 64 ROUTES FEATURES 486-COMPACT PC INDUSTRIAL DESIGN WITH FRONT PANEL (PROTECTION CLASS IP 65), HARD DISK 200 MB (MINIMUM), RAM 4 MB FLOPPY DRIVE 3½ "1.44 MB, SCREEN COLOR LCD TRIMMING UNIT 08.376 FORMATTED TO THE EDGES AFTER MILLING/CALIBRATION WORKPIECES OR FOR MILLING OF LATERAL GROOVES. PROFILES, OR FOLDING WITH 2 MOTORS A 3.0 KW, 12000 RPM, 200 HZ, MOTOR 1 IN THE TRACKING AND MOTOR 2 IN THE OPPOSITE DIRECTION WORKING, SPOTLIGHT 300 LG, 1,5 KW, TO THE PREHEATING THE WORKPIECE EDGE GLUING UNIT 283.1513, STRAIGHT EDGE 3 MM + BARS MIN. LENGTH OF STRIP - SIMPLE/MULTIPLE ROLLER 150 MM MIN BAR LENGTH 300 MM MIN. STRIP HEIGHT 14 MM STRIP HEIGHT 50 MM MAXIMUM BAR LENGTH AT HIGH HOOD 1200 MM GLUING UNIT DESIGNED FOR THE PURE MODE,. GLUE SPECIFICATION 0.8 L FOR PUR GLUE COMPL. M. CARTRIDGE & CONNECTORS BEFORE MELTING PAN APPROX. 1 L REGULATED WITH A HEATING CAPACITY 3 X 400 W 08.421, 2 MOTORS, THE TOP PRESSURE MOUNTED END-TRIMMING UNIT TO THE CAPS OF THE FRONT AND REAR EDGES OR EDGES OVERHANG. FOR CAPS CUTS FLUSH OR WITH A CHAMFER, WITH 2 HM - CAP SAW BLADE 160 X 22 MM Z = 48 MIN. PLATE RECUSAL: APPROX. 30 MM + MAX EDGE OR STRIP THICKNESS MIN. PANEL LENGTH: APPROX. 150 MM MIN. DISTANCE BETWEEN 2 PIECES APPROX. 650 MM MAXIMUM WORKING SPEED: 20 M / MIN. FRONT / HINTERKANTENTASTSCHUH AUSSTEUERBAR WITH 1 MOTOR 660 W, 400 V, 200 HZ, 12000 RPM,. MAX EDGE HEIGHT 55 MM MAXIMUM EDGE THICKNESS 20 MM STATIC FREQUENCY CONVERTER FOR MOTORS > 0.75 TO 1.5 KW, INCL. FILTER AND BRAKING RESISTOR MAINS CONNECTION 3-PHASE, 400-480 V, +/-5%, 50/60 HZ HOR. PNEUM.. SWIVEL DEVICE 0 + 10 ° FOR CAPS 08.421 PER MOTOR WITH PNEUMATIC AUSRüCKBARER PAGE KEYING, MANUALLY POSITIONED ON DIGITAL DISPLAY. MILLING UNIT 08.055 FOR 2 MOTORS WITH HEIGHTS KEYING, GROPING AT THE SIDE, UP TO 30 DEGREES, WITHOUT TOOLS WITH MECHANICAL DIGITAL DISPLAY 09 FOR THE HORIZONTAL AND VERTICAL ADJUSTMENT WITH SINGLE SUCTION NOZZLE BEFORE MILLING FROM ABOVE AND BELOW WITH 1 MOTOR OF 1850 W, 400 V, 200 HZ, 12000 RPM 20 DEGREES TILTING WORKING IKL658078 IN THE OPPOSITE DIRECTION STATIC FREQUENCY CONVERTER FOR MOTORS > 2.2 TO 4.0 KW, INCL. FILTER AND BRAKING RESISTOR MAINS CONNECTION 3-PHASE, 400-480 V, +/-5%, 50/60 HZ IKL658648 MOTOR WITH HSK HOLDER WITH SIDE KEY SKID FOR 1 MOTOR, FOR THE CRACKS, PLATE OFF AND PROFILE MILLING, IKL658805 2 ST LINEAR AXIS FOR VERTICAL MOTOR POSITIONING OF THE HEIGHT OF KEYING, FINE ADJUSTMENT 2 ST PNEUMATIC ADJUSTMENT OF THE AUTOMATIC UPGRADE AT THIN / THICK EDGE OR DECOMMISSIONING AT LAST SOUND SWALLOWING/GUARD FOR COMPOUND AND 1 MILLING UNIT, SUCTION CONNECTOR 2 X 80 UPWARDS, LOCKING MECHANISM ACCORDING TO THE REGULATIONS OF THE BG MULTIPLE PROCESSING UNIT 08.346, TO THE FINE MILLING AND PROFILE MILLING OF THE UPPER LONGITUDINAL EDGE AS WELL AS THE FRONT AND REAR EDGE. WITH HEIGHT AND PAGE KEYING,. PNEUMATIC FEED MOTION HORIZONTALLY AND VERTICALLY. WITH MANUAL MOTOR POSITIONING IN AXLE AND RADIAL DIRECTION VIA DIGITAL DISPLAY, WITH 1 MOTOR 660 W, 400 V, 200 HZ, 12000 RPM,. WITH QUICK CHANGE FACILITY, WITHOUT ANY TOOLS, INCLUDING STATIC FREQUENCY CONVERTERS WITH AUTOMATIC BRAKE DEVICE. HEIGHT 235 MM,. MIN. WORKPIECE RECUSAL 35 MM + EDGE THICKNESS MIN. DISTANCE BETWEEN 2 PIECES: APPROX. 600 MM MAXIMUM SPEED: APPROX. 16 M / MIN. MIN. WORKPIECE THICKNESS AT THE CORNERS COPY 16 MM. LINEAR AXIS FOR HORIZONTAL MOTOR POSITIONING OF THE PAGE SCANNER FOR AUTOMATIC PROGRAM CHANGE (RADIUS - BEVEL) AND FINE ADJUSTMENT AT THE MFA WITH VERTICAL POSITIONING ON 2 FIXED POINTS FOR AUTOMATIC PROGRAM CHANGE (E.G. BAR/PLASTIC EDGE) TOOL HSK-25R TO THE COPY / CUT FOR R1-R3 ONLY ORIGINAL EQUIPMENT MULTIPLE PROCESSING UNIT 08.346, TO THE FINE MILLING AND PROFILE MILLING THE BOTTOM LENGTHWISE EDGE, AS WELL AS THE FRONT AND REAR EDGE, WITH HEIGHT AND PAGE SCANNER,, PNEUMATIC FEED MOTION HORIZONTALLY AND VERTICALLY. WITH MANUAL MOTOR POSITIONING IN AXLE AND RADIAL DIRECTION VIA DIGITAL DISPLAY, WITH 1 MOTOR 660 W, 400 V, 200 HZ, 12000 RPM, WITH QUICK CHANGE FACILITY, WITHOUT ANY TOOLS, INCLUDING STATIC FREQUENCY CONVERTER,. WITH AUTOMATIC BRAKE DEVICE, HEIGHT 235 MM,. MIN. WORKPIECE RECUSAL 35 MM + EDGE THICKNESS MIN. DISTANCE BETWEEN 2 PIECES: APPROX. 600 MM MAXIMUM SPEED: APPROX. 16 M / MIN. MIN. WERKSTüCKDICK CORNERS COPYING 16 MM. LINEAR AXIS FOR HORIZONTAL MOTOR POSITIONING OF THE PAGE SCANNER FOR AUTOMATIC PROGRAM CHANGE (RADIUS - BEVEL) AND FINE ADJUSTMENT AT THE MFA WITH VERTICAL POSITIONING ON 2 FIXED POINTS FOR AUTOMATIC PROGRAM CHANGE (E.G. BAR/PLASTIC EDGE) IKL0079659 79659 1 ST TOOL HSK-25R TO THE COPY / CUT FOR R1-R3 ONLY ORIGINAL EQUIPMENT SOUND SWALLOWING/GUARD WITH 2 HOOD SUCTION NOZZLE �100 MM, BELOW THE TRANSPORT CHAIN, LENGTH 1200 MM GROOVE/GROOVE/PROFILE MILLING UNIT 08.183, FOR CUTTING THROUGH SIDE OR BOTTOM GROOVES, REBATES OR PROFILES, 1 MOTOR FLäCHENNUTEN MAX TO WORKPIECE RECUSAL MINUS 10 MM, SWIVEL, WITHOUT KEYING, MAXIMUM ENGINE POWER 3 KW WITHOUT TOOL WITH MECHANICAL DIGITAL READOUT FOR THE HORIZONTAL AND VERTICAL ADJUSTMENT WITH 1 MOTOR 3.0 KW, 12000 RPM, 200 HZ, KNS 51 MAXIMUM MACHINING CROSS-SECTION CA 20 M / MIN. APPROX. 70 QMM WORKING IN THE TRACKING STATIC FREQUENCY CONVERTER FOR MOTORS > 2.2 TO 4.0 KW, INCL. FILTER AND BRAKING RESISTOR MAINS CONNECTION 3-PHASE, 400-480 V, +/-5%, 50/60 HZ ELECTRO-PNEUMATIC CONTROL OF USAGE FOR THE GROOVE/GROOVE/PROFILFRäSAGG SOUND SWALLOWING/GUARD LENGTH 600-1050 MM COURSE RESERVE FOR 1 KANTENSCHLEIF-UNIT WITH PRE-WIRING PROFILE SCRAPING UNIT 08.519 THE AFTER SCRAPING A UPPER AND LOWER MACHINED VIERTELKREISPROFILES ON GLUED ON PLASTIC EDGING MATERIALS, WITH PRE-SET HM SCRAPER TOOLS. WITH HEIGHT KEYING, SIDE MOMENTARY MECHANICAL DIGITAL DISPLAY 09 FOR THE HORIZONTAL AND VERTICAL ADJUSTMENT, WITH ELECTRO-PNEUMATIC HORIZONTAL JACKSHAFT DEVICE FOR THE UPPER AND LOWER PULLING BLADES UNIT WITH ELECTRO-PNEUMATIC VERTICAL RELEASE DEVICE FOR THE LOWER UNIT OF SCRAPER WITH SINGLE SUCTION NOZZLE. HEIGHT 235 MM, MIN. WORKPIECE THICKNESS 16 MM IKLR2 2 ST R = 2 MM 1 ADJUSTMENT AXIS VERTICALLY FOR THE PROFILE SCRAPER 08.519 DUST-CATCHING BOX FOR PROFILE SCRAPING UNIT COURSE RESERVE FOR 1 PROFILE SCRAPER WITH PRE-WIRING AUTO-SENSING SCRAPING UNIT 08.50 TO REMOVE HOT MELT ADHESIVES FROM THE PERIPHERY OF WORKPIECE UPPER AND SUBPAGES, CONTROLLABLE, WITH 2 CUTTING PLATES, WORKPIECE RECUSAL MIN WITH 2 AIR NOZZLES TO CLEAN BLOW OF THE SCRAPER 30 MM COURSE RESERVE FOR DETERGENT INDICATION WITH PRE-WIRING FASSCHLEIF/BUFFING UNIT 08.612, NOT OSCILLATING, AFTER CLEANING THE TOP AND BOTTOM FLUSH MILLED KANTENMATERIALES OR THICK EDGES, POLISHING PIVOTS ON A VERTICAL AND HORIZONTAL AXIS WITH 2 MOTORS 0.25 KW, 230/400V, 50 HZ, 1500 RPM. WITH 1 POLISHING WHEEL DIAMETER. 40 X 200 X 18 HEIGHT 235 MM PNEUMATIC RELEASE DEVICE FOR THE BUFFING UNIT 08.612 1 SET OF SCHWABBELSCHEIBEN2 ST FOR THE AFOREMENTIONED BUFFING UNIT 08.612 RUNNING IN STICKY-BRITE COMPLETE WITH MOUNTS SMOOTHNESS AGGREGATE 08.53 TO SMOOTH THE MILLED AND DRAWN OUT PVC/ABS PROFILE EDGE, FOR R = 1,3-4 MM, 1 UPPER AND 1 LOWER SMOOTHNESS ZONE, MIN. WORKPIECE THICKNESS WITH HORIZONTAL PNEUMATIC CLUTCH DEVICE 16 MM MACHINE IS STILL CONNECTED AND CAN BE SEEN IN OPERATION. SALE FROM LOCATION NEAR STUTTGART THE TECHNICAL DESCRIPTION COMES FROM THE ORIGINAL-FROM THE MANUFACTURER HEAVY EQUIPMENT AND MACHINERY AND EQUIPMENT, WITHOUT WARRANTY. TECHNICAL DATA, YEAR OF MANUFACTURE AND CONDITION NO WARRANTY! BOUGHT AS SEEN! SUBJECT TO PRIOR SALE DELIVERY: FROM SITE'S TERMS & CONDITIONS APPLY
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-drilling capacity diameter max.: 25 ( in steel st.60) mm<br/>drilling capacity diameter min.: 3 (4) mm<br/>bore depth: 1000 mm<br/>numbers of pallets: 2 <br/>size of pallet: 1000 x 800 mm<br/>control: siemens 840 d <br/>number of controlled axis: 5 <br/>travel -x axis: 2000 mm<br/>travel -y axis: 1000 mm<br/>travel -z axis: 1500 (1340) mm<br/>travel -w axis: 1000 mm<br/>b-axis (table): 360° deg<br/>workpiece dia.: max. 1700 (störkreis) mm<br/>spindle turning speed range: 1250/2950/6880/15000 u/min<br/>output: 7/16/7/2 (100 %) kw<br/>output: 8,4/19,2/8,4/2,4 (60 %) kw<br/>torque: 60/55/12/1,5 nm<br/>feed speed: 0 - 15000 (z) m/min.<br/>feed speeds: 100 - 10000 (x) mm/min<br/>feed speeds: 100 - 10000 (y) mm/min<br/>feed speeds: 100 - 10000 (w) mm/min<br/>table load: 5000 (nutzlast) dan<br/>total power requirement: 32 (100a) kw<br/>weight of the machine ca.: 16650 kg<br/>dimensions of the machine ca.: 7,8 x 6,15 x 3,26 m<br/>cnc deephole boring machine with pallet-changer<br/>former purchase price according to the present order confirmation<br/>from the previous owner 433.202,27 euros<br/><br/>equipment:<br/>pallet changer with two pallets<br/>housing<br/>15 off boring bars<br/>machine documentation in german language<br/>coolant equipment<br/>chip (swarf) conveyor<br/><br/>machine in very good condition, now stored in our warehouse in düsseldorf (not<br/>under power).<br/><br/>equipment / accessories:<br/>pallet changer with two pallets<br/>housing<br/>15 off boring bars<br/>machine documentation in german language<br/>coolant equipment<br/>chip (swarf) conveyor<br/><br/>the previous owner ist he company multivac.<br/>multivac is the leader in horizontal thermoforming packaging solutions. <br/>with our thermoforming machines pack efficiently and economically a wide range <br/>of products such. <br/>as food, industrial and consumer products and medical and pharmaceutical <br/>products.<br/><br/>some more technical details:<br/>cnc deep hole drilling machine with pallet changer<br/><br/>technical specifications:<br/>scope of application<br/>deep drilling<br/>spindle number 1<br/>bore slide stroke 1500 mm, with 2 steadies 1340 mm<br/>drilling method single-fluted gun drill<br/>drilling depth max. 1000 mm with 2 steadies<br/>drilling (in steel st.60)<br/>min. diameter 4 mm (standard)<br/>min. diameter 3 mm (optional)<br/>max. diameter 25 mm<br/>with single-fluted gun drill<br/><br/>boring drive<br/>manufacturer fortuna, msl-rz 210 fl 15/7<br/>without spindle cooling, with lifetime grease filling, with ptc,<br/>with temperature sensor, with sealing air connection 0,8 bar<br/>speeds 1250/2950/6880/15000 rpm<br/>power 7/16/7/2 kw at 100%<br/>power 8.4 / 19.2 / 8.4 / 2.4 kw at 60%<br/>torque 60/55/12 / 1.5 nm<br/><br/>z-axis<br/>feed speeds 0-15000 mm / min.<br/>rapid traverse rate 15 m / min.<br/>engine power 20 nm at 2000 rpm<br/>integrated encoder type ern 1387<br/>feed force 1000 dan<br/>travel 1500 mm (1340 mm with 2 steadies)<br/><br/>x axis <br/>roller monorail rue 55<br/>feed speeds from 100 to 10000 mm / min.<br/>rapid traverse 15 m / min.<br/>engine power 27 nm at 2000 rpm<br/>integrated encoder type ag 612<br/>travel 2000 mm<br/><br/>y-axis<br/>roller monorail rue 55<br/>feed speeds from 100 to 10000 mm / min.<br/>rapid traverse 15 m / min.<br/>engine power 27 nm at 2000 rpm<br/>integrated encoder type ern 1387<br/>travel 1000 mm<br/><br/><br/>w-axis<br/>roller monorail rue 55<br/>feed speeds from 100 to 10000 mm / min.<br/>rapid traverse rate 15 m / min.<br/>engine power 27 nm at 2000 rpm<br/>integrated encoder type ag 612<br/>travel  1000 mm<br/><br/>worktable<br/>clamping size 1000 x 800 mm<br/>angle measurement directly display on the screen, 360 deg continuously <br/>rotatably.<br/>b-axis integrated rotary encoder type rod 426<br/>max. table load 5000 dan<br/>transport capacity 25000 nm<br/>t-slots along 7 piece<br/>aligning slots lengthwise and crosswise 1<br/>centering 1<br/><br/>nc table<br/>type pktf<br/>size 45<br/>engine power 27 nm<br/>speed 3000 rpm<br/>reduction 1: 180 + 1: 2<br/>clamping hydraulically<br/>clamping force 34 kn<br/>max. turning speed 10 1 / min.<br/>dividing accuracy +/- 6.75 <br/><br/>voltage<br/>operating voltage 400 v<br/>frequency 50 hz<br/>control voltage 230 v / 24 v<br/>total power 32 kw<br/>cross section 35 mm²<br/>fuse 100 a<br/>rated current 72 a<br/><br/>main dimensions<br/>length x width x height approx. 7800 x 6150 x 3260 mm<br/>transport weight 15 t<br/><br/>coolant system<br/>cooling lubricant emulsion<br/>km-1000 l container with level indicator<br/>submersible pump 100 ltr. at 5 bar<br/>submersible pump 20 ltr. at 0.52 bar<br/>high-pressure pump unit 56 l / min. at 80 bar, 75 l / min. at 70 bar<br/>?rollensieb? filter flow rate 100 l / min.<br/>submersible pump 100 ltr. at 0.5 bar<br/>chip conveying chips amount approximately 25 kg / h<br/><br/>description of the machine:<br/>the complete solution with high-frequency spindle and coolant system in<br/>machine bed is integrated for machining different workpieces suitable.<br/><br/>the drilling machine is equipped with a circular dividing table.<br/>the rotary indexing table is individually displaced.<br/><br/>the workpiece clamping, drill bushing and editing tools (possibly<br/>steady rest) are select the workpiece to be machined accordingly<br/><br/>(additional equipment).<br/>processing methods<br/>this boring machine is designed for deep drilling (single-fluted gun drill).<br/><br/>processing unit<br/>the spindle unit is mounted on a feed slide with linear rolling guides <br/>assembled. <br/>the feed drive is infinitely adjustable.<br/>the rapid traverse speed is determined by the nc program (parameters)<br/>and monitored.<br/><br/>the spindle speed is infinitely variable (frequency controlled) the<br/>performance data for the main and feed drives through the digital<br/>drive technology is available directly from the inverters.<br/><br/>the spindle bearing is a precision spindle bearing with lifetime grease <br/>lubrication.<br/><br/>sealing air against the penetration of the cooling lubricant.<br/><br/>workpiece clamping<br/>the nc rotary table has a clamping area of 1000 x 800 mm.<br/>the rotary indexing table is adjustable by electric motors. the position<br/>is detected by a rotary encoder and displayed in the control picture.<br/>the rotary indexing table is hydraulically clamped in the basic position.<br/>the surface of the circular table top section is as pallet clamping station<br/>educated.<br/><br/>the traveling column (x-axis) is mounted on linear roller guides.<br/>the feed drive is adjustable. the positioning of the traveling column<br/>via the the nc program.<br/><br/>steady rest<br/>the steady rest serves to support the drill pipe. the steady rest bush<br/>reduces the drill pipe and machining vibrations. the retreat is<br/>determined via a roller chain and set.<br/><br/>additional equipment<br/>the coolant system with high-pressure diaphragm piston pump, chip conveyor<br/>?rollensieb? filter, mud pump, submersible pump pumps the cleaned cooling<br/>lubricant for drilling.<br/><br/>cnc control consisting of a siemens sinumerik 840 d including<br/>plc s7-300, slimline operator panel (op31) with color display and operating and<br/>control panel with override function.<br/><br/>nc / plc<br/>the machine is equipped with an nc control for deep hole drilling machines and a<br/>memory programming controller (plc) equipped.<br/><br/>equipment:<br/>fully protective housing<br/>separate electric cabinet<br/>machine documentation in german language<br/>various drill spindles, 15 pcs.<br/><br/><br/><br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> DRILLING CAPACITY DIAMETER MAX.: 25 ( IN STEEL ST.60) MM
DRILLING CAPACITY DIAMETER MIN.: 3 (4) MM
BORE DEPTH: 1000 MM
NUMBERS OF PALLETS: 2
SIZE OF PALLET: 1000 X 800 MM
CONTROL: SIEMENS 840 D
NUMBER OF CONTROLLED AXIS: 5
TRAVEL -X AXIS: 2000 MM
TRAVEL -Y AXIS: 1000 MM
TRAVEL -Z AXIS: 1500 (1340) MM
TRAVEL -W AXIS: 1000 MM
B-AXIS (TABLE): 360° DEG
WORKPIECE DIA.: MAX. 1700 (STöRKREIS) MM
SPINDLE TURNING SPEED RANGE: 1250/2950/6880/15000 U/MIN
OUTPUT: 7/16/7/2 (100 %) KW
OUTPUT: 8,4/19,2/8,4/2,4 (60 %) KW
TORQUE: 60/55/12/1,5 NM
FEED SPEED: 0 - 15000 (Z) M/MIN.
FEED SPEEDS: 100 - 10000 (X) MM/MIN
FEED SPEEDS: 100 - 10000 (Y) MM/MIN
FEED SPEEDS: 100 - 10000 (W) MM/MIN
TABLE LOAD: 5000 (NUTZLAST) DAN
TOTAL POWER REQUIREMENT: 32 (100A) KW
WEIGHT OF THE MACHINE CA.: 16650 KG
DIMENSIONS OF THE MACHINE CA.: 7,8 X 6,15 X 3,26 M
CNC DEEPHOLE BORING MACHINE WITH PALLET-CHANGER
FORMER PURCHASE PRICE ACCORDING TO THE PRESENT ORDER CONFIRMATION
FROM THE PREVIOUS OWNER 433.202,27 EUROS

EQUIPMENT:
PALLET CHANGER WITH TWO PALLETS
HOUSING
15 OFF BORING BARS
MACHINE DOCUMENTATION IN GERMAN LANGUAGE
COOLANT EQUIPMENT
CHIP (SWARF) CONVEYOR

MACHINE IN VERY GOOD CONDITION, NOW STORED IN OUR WAREHOUSE IN DüSSELDORF (NOT
UNDER POWER).

EQUIPMENT / ACCESSORIES:
PALLET CHANGER WITH TWO PALLETS
HOUSING
15 OFF BORING BARS
MACHINE DOCUMENTATION IN GERMAN LANGUAGE
COOLANT EQUIPMENT
CHIP (SWARF) CONVEYOR

THE PREVIOUS OWNER IST HE COMPANY MULTIVAC.
MULTIVAC IS THE LEADER IN HORIZONTAL THERMOFORMING PACKAGING SOLUTIONS.
WITH OUR THERMOFORMING MACHINES PACK EFFICIENTLY AND ECONOMICALLY A WIDE RANGE
OF PRODUCTS SUCH.
AS FOOD, INDUSTRIAL AND CONSUMER PRODUCTS AND MEDICAL AND PHARMACEUTICAL
PRODUCTS.

SOME MORE TECHNICAL DETAILS:
CNC DEEP HOLE DRILLING MACHINE WITH PALLET CHANGER

TECHNICAL SPECIFICATIONS:
SCOPE OF APPLICATION
DEEP DRILLING
SPINDLE NUMBER 1
BORE SLIDE STROKE 1500 MM, WITH 2 STEADIES 1340 MM
DRILLING METHOD SINGLE-FLUTED GUN DRILL
DRILLING DEPTH MAX. 1000 MM WITH 2 STEADIES
DRILLING (IN STEEL ST.60)
MIN. DIAMETER 4 MM (STANDARD)
MIN. DIAMETER 3 MM (OPTIONAL)
MAX. DIAMETER 25 MM
WITH SINGLE-FLUTED GUN DRILL

BORING DRIVE
MANUFACTURER FORTUNA, MSL-RZ 210 FL 15/7
WITHOUT SPINDLE COOLING, WITH LIFETIME GREASE FILLING, WITH PTC,
WITH TEMPERATURE SENSOR, WITH SEALING AIR CONNECTION 0,8 BAR
SPEEDS 1250/2950/6880/15000 RPM
POWER 7/16/7/2 KW AT 100%
POWER 8.4 / 19.2 / 8.4 / 2.4 KW AT 60%
TORQUE 60/55/12 / 1.5 NM

Z-AXIS
FEED SPEEDS 0-15000 MM / MIN.
RAPID TRAVERSE RATE 15 M / MIN.
ENGINE POWER 20 NM AT 2000 RPM
INTEGRATED ENCODER TYPE ERN 1387
FEED FORCE 1000 DAN
TRAVEL 1500 MM (1340 MM WITH 2 STEADIES)

X AXIS
ROLLER MONORAIL RUE 55
FEED SPEEDS FROM 100 TO 10000 MM / MIN.
RAPID TRAVERSE 15 M / MIN.
ENGINE POWER 27 NM AT 2000 RPM
INTEGRATED ENCODER TYPE AG 612
TRAVEL 2000 MM

Y-AXIS
ROLLER MONORAIL RUE 55
FEED SPEEDS FROM 100 TO 10000 MM / MIN.
RAPID TRAVERSE 15 M / MIN.
ENGINE POWER 27 NM AT 2000 RPM
INTEGRATED ENCODER TYPE ERN 1387
TRAVEL 1000 MM


W-AXIS
ROLLER MONORAIL RUE 55
FEED SPEEDS FROM 100 TO 10000 MM / MIN.
RAPID TRAVERSE RATE 15 M / MIN.
ENGINE POWER 27 NM AT 2000 RPM
INTEGRATED ENCODER TYPE AG 612
TRAVEL 1000 MM

WORKTABLE
CLAMPING SIZE 1000 X 800 MM
ANGLE MEASUREMENT DIRECTLY DISPLAY ON THE SCREEN, 360 DEG CONTINUOUSLY
ROTATABLY.
B-AXIS INTEGRATED ROTARY ENCODER TYPE ROD 426
MAX. TABLE LOAD 5000 DAN
TRANSPORT CAPACITY 25000 NM
T-SLOTS ALONG 7 PIECE
ALIGNING SLOTS LENGTHWISE AND CROSSWISE 1
CENTERING 1

NC TABLE
TYPE PKTF
SIZE 45
ENGINE POWER 27 NM
SPEED 3000 RPM
REDUCTION 1: 180 + 1: 2
CLAMPING HYDRAULICALLY
CLAMPING FORCE 34 KN
MAX. TURNING SPEED 10 1 / MIN.
DIVIDING ACCURACY +/- 6.75

VOLTAGE
OPERATING VOLTAGE 400 V
FREQUENCY 50 HZ
CONTROL VOLTAGE 230 V / 24 V
TOTAL POWER 32 KW
CROSS SECTION 35 MM²
FUSE 100 A
RATED CURRENT 72 A

MAIN DIMENSIONS
LENGTH X WIDTH X HEIGHT APPROX. 7800 X 6150 X 3260 MM
TRANSPORT WEIGHT 15 T

COOLANT SYSTEM
COOLING LUBRICANT EMULSION
KM-1000 L CONTAINER WITH LEVEL INDICATOR
SUBMERSIBLE PUMP 100 LTR. AT 5 BAR
SUBMERSIBLE PUMP 20 LTR. AT 0.52 BAR
HIGH-PRESSURE PUMP UNIT 56 L / MIN. AT 80 BAR, 75 L / MIN. AT 70 BAR
?ROLLENSIEB? FILTER FLOW RATE 100 L / MIN.
SUBMERSIBLE PUMP 100 LTR. AT 0.5 BAR
CHIP CONVEYING CHIPS AMOUNT APPROXIMATELY 25 KG / H

DESCRIPTION OF THE MACHINE:
THE COMPLETE SOLUTION WITH HIGH-FREQUENCY SPINDLE AND COOLANT SYSTEM IN
MACHINE BED IS INTEGRATED FOR MACHINING DIFFERENT WORKPIECES SUITABLE.

THE DRILLING MACHINE IS EQUIPPED WITH A CIRCULAR DIVIDING TABLE.
THE ROTARY INDEXING TABLE IS INDIVIDUALLY DISPLACED.

THE WORKPIECE CLAMPING, DRILL BUSHING AND EDITING TOOLS (POSSIBLY
STEADY REST) ARE SELECT THE WORKPIECE TO BE MACHINED ACCORDINGLY

(ADDITIONAL EQUIPMENT).
PROCESSING METHODS
THIS BORING MACHINE IS DESIGNED FOR DEEP DRILLING (SINGLE-FLUTED GUN DRILL).

PROCESSING UNIT
THE SPINDLE UNIT IS MOUNTED ON A FEED SLIDE WITH LINEAR ROLLING GUIDES
ASSEMBLED.
THE FEED DRIVE IS INFINITELY ADJUSTABLE.
THE RAPID TRAVERSE SPEED IS DETERMINED BY THE NC PROGRAM (PARAMETERS)
AND MONITORED.

THE SPINDLE SPEED IS INFINITELY VARIABLE (FREQUENCY CONTROLLED) THE
PERFORMANCE DATA FOR THE MAIN AND FEED DRIVES THROUGH THE DIGITAL
DRIVE TECHNOLOGY IS AVAILABLE DIRECTLY FROM THE INVERTERS.

THE SPINDLE BEARING IS A PRECISION SPINDLE BEARING WITH LIFETIME GREASE
LUBRICATION.

SEALING AIR AGAINST THE PENETRATION OF THE COOLING LUBRICANT.

WORKPIECE CLAMPING
THE NC ROTARY TABLE HAS A CLAMPING AREA OF 1000 X 800 MM.
THE ROTARY INDEXING TABLE IS ADJUSTABLE BY ELECTRIC MOTORS. THE POSITION
IS DETECTED BY A ROTARY ENCODER AND DISPLAYED IN THE CONTROL PICTURE.
THE ROTARY INDEXING TABLE IS HYDRAULICALLY CLAMPED IN THE BASIC POSITION.
THE SURFACE OF THE CIRCULAR TABLE TOP SECTION IS AS PALLET CLAMPING STATION
EDUCATED.

THE TRAVELING COLUMN (X-AXIS) IS MOUNTED ON LINEAR ROLLER GUIDES.
THE FEED DRIVE IS ADJUSTABLE. THE POSITIONING OF THE TRAVELING COLUMN
VIA THE THE NC PROGRAM.

STEADY REST
THE STEADY REST SERVES TO SUPPORT THE DRILL PIPE. THE STEADY REST BUSH
REDUCES THE DRILL PIPE AND MACHINING VIBRATIONS. THE RETREAT IS
DETERMINED VIA A ROLLER CHAIN AND SET.

ADDITIONAL EQUIPMENT
THE COOLANT SYSTEM WITH HIGH-PRESSURE DIAPHRAGM PISTON PUMP, CHIP CONVEYOR
?ROLLENSIEB? FILTER, MUD PUMP, SUBMERSIBLE PUMP PUMPS THE CLEANED COOLING
LUBRICANT FOR DRILLING.

CNC CONTROL CONSISTING OF A SIEMENS SINUMERIK 840 D INCLUDING
PLC S7-300, SLIMLINE OPERATOR PANEL (OP31) WITH COLOR DISPLAY AND OPERATING AND
CONTROL PANEL WITH OVERRIDE FUNCTION.

NC / PLC
THE MACHINE IS EQUIPPED WITH AN NC CONTROL FOR DEEP HOLE DRILLING MACHINES AND A
MEMORY PROGRAMMING CONTROLLER (PLC) EQUIPPED.

EQUIPMENT:
FULLY PROTECTIVE HOUSING
SEPARATE ELECTRIC CABINET
MACHINE DOCUMENTATION IN GERMAN LANGUAGE
VARIOUS DRILL SPINDLES, 15 PCS.





THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-baler bts-mf550hd<br/>  <br/>  height: 3500mm<br/>  width: 2115mm<br/>  depth: 1200mm<br/>  weight: 1935kg<br/>  transportation ht: 2500mm<br/>  power supply: 380-400v (three phase)<br/>  motor: 11kw 32 amp<br/>  compaction force: up to 50 ton<br/>  noise level: 75 decibels<br/>  <br/>  bale<br/>  height: 1200mm<br/>  width: 1500mm<br/>  depth: 769mm<br/>  weight: up to 610kg (depends on material)<br/>  cycle times: 50 seconds<br/>  <br/>  loading aperture<br/>  height: 880mm<br/>  width: 1500mm<br/>  depth: 769mm<br/>  <br/>  features <br/>  o extended cylinders produce a more compact bale <br/>  o can bale a variety of waste products including tyres, pet-bottles, textiles, computer screens and other heavy duty materials <br/>  o fully automated bale ejector, simplifies removal of bale <br/>  o retaining claw system to reduce spring back<br/>  o ce-certified<br/>  o made in europe <br/>  <br/>  optional extras <br/>  o vertical door <br/>  o plc controls (automatic bale cycle)<br/>  o unique patented prong shaper design eliminates the need for pallets when lifting, stacking and transporting bales<br/>  <br/>  up to 80 tyres in one bale<br/>  up to 26 ton in a 40ft container<br/>  up to 300 tyres per hour<br/>  up to 70% storage saving<br/>  up to 55% transport saving; ready for operation BALER BTS-MF550HD

HEIGHT: 3500MM
WIDTH: 2115MM
DEPTH: 1200MM
WEIGHT: 1935KG
TRANSPORTATION HT: 2500MM
POWER SUPPLY: 380-400V (THREE PHASE)
MOTOR: 11KW 32 AMP
COMPACTION FORCE: UP TO 50 TON
NOISE LEVEL: 75 DECIBELS

BALE
HEIGHT: 1200MM
WIDTH: 1500MM
DEPTH: 769MM
WEIGHT: UP TO 610KG (DEPENDS ON MATERIAL)
CYCLE TIMES: 50 SECONDS

LOADING APERTURE
HEIGHT: 880MM
WIDTH: 1500MM
DEPTH: 769MM

FEATURES
O EXTENDED CYLINDERS PRODUCE A MORE COMPACT BALE
O CAN BALE A VARIETY OF WASTE PRODUCTS INCLUDING TYRES, PET-BOTTLES, TEXTILES, COMPUTER SCREENS AND OTHER HEAVY DUTY MATERIALS
O FULLY AUTOMATED BALE EJECTOR, SIMPLIFIES REMOVAL OF BALE
O RETAINING CLAW SYSTEM TO REDUCE SPRING BACK
O CE-CERTIFIED
O MADE IN EUROPE

OPTIONAL EXTRAS
O VERTICAL DOOR
O PLC CONTROLS (AUTOMATIC BALE CYCLE)
O UNIQUE PATENTED PRONG SHAPER DESIGN ELIMINATES THE NEED FOR PALLETS WHEN LIFTING, STACKING AND TRANSPORTING BALES

UP TO 80 TYRES IN ONE BALE
UP TO 26 TON IN A 40FT CONTAINER
UP TO 300 TYRES PER HOUR
UP TO 70% STORAGE SAVING
UP TO 55% TRANSPORT SAVING; READY FOR OPERATION
Vendedor: Beckmann Technik & Service KG
Año de construcción: usado
Ubicación: Land-1 mehrzweck-flächen-schleifautomat\r\nheesemann\r\ntype: hsm .3 qlkld\r\nschleifbreite 1.300 mm\r\nneumaschine\r\n\r\nständeraufbau mit transportbett\r\nmit durchgehendem transportteppich, vorschubgeschwindigkeit 3  - 15 m/min. frequenzgeregelt, konstante arbeitshöhe 880 mm, maschinenoberteil entsprechend der werkstückdicke (3 - 160 mm) motorisch verstellbar,  integrierte schaltschränke. \r\n\r\n1 andruckwalze (Ø 50 mm), pendelnd, im einlauf der maschine, inkl. Übermaßkontrolle\r\n\r\n1 industrie-pc 7\r\n7-zoll-tft color-display, 800 x 480 punktauflösung, 512 mb micro-sd-flash-karte, betriebssystem windows embedded compact 7, touch-screen-ausführung, anzeige produktions- und stillstandzeiten. ethernet-anschluss möglich. mit programmspeicher für 100 programme, werte für motorgeschwindigkeiten, schleifbeginn, schleifende, schleifkantenintensität und schleifdruck werden gespeichert und nach wahl des programms automatisch eingestellt. \r\n\r\n1 querschleifaggregat\r\nschleifbandabmessungen:4.800 x 150 mm\r\nbandgeschwindigkeit:2,0 - 20 m/s\r\nantriebsleistung:15 kw frequenzumformer\r\nstufenlose einstellung der schleifbandgeschwindigkeiten, in verbindung mit zusätzlichem rotor zur bandausblasung, verschleißfreie bremseinrichtung, drucklamellenbandsystem, bandabstrahleinrichtung werkstückabhängig gesteuert, abschaltbar.\r\n\r\n1 längsschleifaggregat\r\nschleifbandabmessungen: 2.620 x 1.350 mm\r\nbandgeschwindigkeiten: 1,8 - 18 m/s\r\nantriebsleistung: 15 kw frequenzumformer\r\nstufenlose einstellung der schleifbandgeschwindigkeiten, verschleißfreie bremseinrichtung, automatischer ausgleich von eventuell unterschiedlichen bandkantenlängen, einschl. schleifbandabstrahleinrichtung.\r\neinschl. gleich-und gegenlauf;\r\nvordere kalibrierumlenkwalze Ø98 mm, glatt, über terminal zuschaltbar. \r\n1 längsschleifaggregat mit drucklamellenbandsystem\r\nschleifbandabmessungen: 2.620 x 1.350 mm\r\nbandgeschwindigkeiten: 1,8 - 9 m/s (bis 18 m/s ohne drucklamellenband)\r\nantriebsleistung: 15 kw frequenzumformer\r\nstufenlose einstellung der schleifbandgeschwindigkeiten, verschleißfreie bremseinrichtung, automatischer ausgleich von eventuell unterschiedlichen bandkantenlängen, schleifband im gegenlauf arbeitend, exzentrisch verstellbare antriebswalzen, die es ermöglichen, das aggregat für unterschiedliche drucklamellenbanddicken sowie den einsatz des aggregates ohne drucklamellenband einzustellen. einschl. schleifbandabstrahleinrichtung.\r\n\r\n3 druckbalken mit computergesteuertem selektiv - druckregelungssystem csd® (10 jahre gewährleistung)\r\nmit stufenloser druckanpassung der einzelnen andruckelemente, für freie, mehrgleisige beschickung. abstand der steuerrollen 21 mm. werkstücktoleranzaus­gleich bis 2 mm durch wartungsfreie andruckmagnete. arbeitsbreite sowie schleifbeginn und -ende des druckbalkens werden elektronisch gesteuert. während ein werkstück durch die maschine läuft, ermöglichen die andruckelemente mittels elektrischer hubmagnete eine stufenlose regulierung der andruckkraft jedes einzelnen druckschuhs. diese innovative csd®-technologie garantiert jederzeit einen proportional gleichen druck im hinblick auf die auflagefläche des druckschuhs auf dem werkstück. durch diese stufenlose, dynamische steuerung der andruckkraft ist das risiko des durchschleifens an den kanten so gut wie ausgeschlossen. außerdem ist das elektromagnetische csd®-system wartungsfrei, da kein verschmutzen wie bei pneumatikelementen möglich ist. \r\n\r\n1 bürstenwalzenaggregat\r\nhöhenverstellbar, einschl. absaughaube\r\nbürstenbesatz: fibre\r\ndurchmesser: 120 mm\r\nantriebsleistung: 0,75 kw\r\n\r\n1 werkstücksaugspannanlage\r\nfür den sicheren transport von werkstücken kürzer als 500 mm in vorschubrichtung, einschl.  integrierter ventilator, antriebsleistung 2,2 kw \r\n\r\nenergymanagement-system ems\r\n\r\nbandauflageseite: links \r\nterminal: frontseite links \r\nbetriebsspannung: 400 volt, 50 hz\r\n\r\n\r\nbeschreibung und bilder zeigen beispielhaft die maschinenserie. tatsächliche konfiguration kann nach kundenwunsch angepasst werden.\r\n\r\n 1 MEHRZWECK-FLäCHEN-SCHLEIFAUTOMAT\R\NHEESEMANN\R\NTYPE: HSM .3 QLKLD\R\NSCHLEIFBREITE 1.300 MM\R\NNEUMASCHINE\R\N\R\NSTäNDERAUFBAU MIT TRANSPORTBETT\R\NMIT DURCHGEHENDEM TRANSPORTTEPPICH, VORSCHUBGESCHWINDIGKEIT 3 - 15 M/MIN. FREQUENZGEREGELT, KONSTANTE ARBEITSHöHE 880 MM, MASCHINENOBERTEIL ENTSPRECHEND DER WERKSTüCKDICKE (3 - 160 MM) MOTORISCH VERSTELLBAR, INTEGRIERTE SCHALTSCHRäNKE. \R\N\R\N1 ANDRUCKWALZE (Ø 50 MM), PENDELND, IM EINLAUF DER MASCHINE, INKL. ÜBERMAßKONTROLLE\R\N\R\N1 INDUSTRIE-PC 7\R\N7-ZOLL-TFT COLOR-DISPLAY, 800 X 480 PUNKTAUFLöSUNG, 512 MB MICRO-SD-FLASH-KARTE, BETRIEBSSYSTEM WINDOWS EMBEDDED COMPACT 7, TOUCH-SCREEN-AUSFüHRUNG, ANZEIGE PRODUKTIONS- UND STILLSTANDZEITEN. ETHERNET-ANSCHLUSS MöGLICH. MIT PROGRAMMSPEICHER FüR 100 PROGRAMME, WERTE FüR MOTORGESCHWINDIGKEITEN, SCHLEIFBEGINN, SCHLEIFENDE, SCHLEIFKANTENINTENSITäT UND SCHLEIFDRUCK WERDEN GESPEICHERT UND NACH WAHL DES PROGRAMMS AUTOMATISCH EINGESTELLT. \R\N\R\N1 QUERSCHLEIFAGGREGAT\R\NSCHLEIFBANDABMESSUNGEN:4.800 X 150 MM\R\NBANDGESCHWINDIGKEIT:2,0 - 20 M/S\R\NANTRIEBSLEISTUNG:15 KW FREQUENZUMFORMER\R\NSTUFENLOSE EINSTELLUNG DER SCHLEIFBANDGESCHWINDIGKEITEN, IN VERBINDUNG MIT ZUSäTZLICHEM ROTOR ZUR BANDAUSBLASUNG, VERSCHLEIßFREIE BREMSEINRICHTUNG, DRUCKLAMELLENBANDSYSTEM, BANDABSTRAHLEINRICHTUNG WERKSTüCKABHäNGIG GESTEUERT, ABSCHALTBAR.\R\N\R\N1 LäNGSSCHLEIFAGGREGAT\R\NSCHLEIFBANDABMESSUNGEN: 2.620 X 1.350 MM\R\NBANDGESCHWINDIGKEITEN: 1,8 - 18 M/S\R\NANTRIEBSLEISTUNG: 15 KW FREQUENZUMFORMER\R\NSTUFENLOSE EINSTELLUNG DER SCHLEIFBANDGESCHWINDIGKEITEN, VERSCHLEIßFREIE BREMSEINRICHTUNG, AUTOMATISCHER AUSGLEICH VON EVENTUELL UNTERSCHIEDLICHEN BANDKANTENLäNGEN, EINSCHL. SCHLEIFBANDABSTRAHLEINRICHTUNG.\R\NEINSCHL. GLEICH-UND GEGENLAUF;\R\NVORDERE KALIBRIERUMLENKWALZE Ø98 MM, GLATT, üBER TERMINAL ZUSCHALTBAR. \R\N1 LäNGSSCHLEIFAGGREGAT MIT DRUCKLAMELLENBANDSYSTEM\R\NSCHLEIFBANDABMESSUNGEN: 2.620 X 1.350 MM\R\NBANDGESCHWINDIGKEITEN: 1,8 - 9 M/S (BIS 18 M/S OHNE DRUCKLAMELLENBAND)\R\NANTRIEBSLEISTUNG: 15 KW FREQUENZUMFORMER\R\NSTUFENLOSE EINSTELLUNG DER SCHLEIFBANDGESCHWINDIGKEITEN, VERSCHLEIßFREIE BREMSEINRICHTUNG, AUTOMATISCHER AUSGLEICH VON EVENTUELL UNTERSCHIEDLICHEN BANDKANTENLäNGEN, SCHLEIFBAND IM GEGENLAUF ARBEITEND, EXZENTRISCH VERSTELLBARE ANTRIEBSWALZEN, DIE ES ERMöGLICHEN, DAS AGGREGAT FüR UNTERSCHIEDLICHE DRUCKLAMELLENBANDDICKEN SOWIE DEN EINSATZ DES AGGREGATES OHNE DRUCKLAMELLENBAND EINZUSTELLEN. EINSCHL. SCHLEIFBANDABSTRAHLEINRICHTUNG.\R\N\R\N3 DRUCKBALKEN MIT COMPUTERGESTEUERTEM SELEKTIV - DRUCKREGELUNGSSYSTEM CSD® (10 JAHRE GEWäHRLEISTUNG)\R\NMIT STUFENLOSER DRUCKANPASSUNG DER EINZELNEN ANDRUCKELEMENTE, FüR FREIE, MEHRGLEISIGE BESCHICKUNG. ABSTAND DER STEUERROLLEN 21 MM. WERKSTüCKTOLERANZAUS­GLEICH BIS 2 MM DURCH WARTUNGSFREIE ANDRUCKMAGNETE. ARBEITSBREITE SOWIE SCHLEIFBEGINN UND -ENDE DES DRUCKBALKENS WERDEN ELEKTRONISCH GESTEUERT. WäHREND EIN WERKSTüCK DURCH DIE MASCHINE LäUFT, ERMöGLICHEN DIE ANDRUCKELEMENTE MITTELS ELEKTRISCHER HUBMAGNETE EINE STUFENLOSE REGULIERUNG DER ANDRUCKKRAFT JEDES EINZELNEN DRUCKSCHUHS. DIESE INNOVATIVE CSD®-TECHNOLOGIE GARANTIERT JEDERZEIT EINEN PROPORTIONAL GLEICHEN DRUCK IM HINBLICK AUF DIE AUFLAGEFLäCHE DES DRUCKSCHUHS AUF DEM WERKSTüCK. DURCH DIESE STUFENLOSE, DYNAMISCHE STEUERUNG DER ANDRUCKKRAFT IST DAS RISIKO DES DURCHSCHLEIFENS AN DEN KANTEN SO GUT WIE AUSGESCHLOSSEN. AUßERDEM IST DAS ELEKTROMAGNETISCHE CSD®-SYSTEM WARTUNGSFREI, DA KEIN VERSCHMUTZEN WIE BEI PNEUMATIKELEMENTEN MöGLICH IST. \R\N\R\N1 BüRSTENWALZENAGGREGAT\R\NHöHENVERSTELLBAR, EINSCHL. ABSAUGHAUBE\R\NBüRSTENBESATZ: FIBRE\R\NDURCHMESSER: 120 MM\R\NANTRIEBSLEISTUNG: 0,75 KW\R\N\R\N1 WERKSTüCKSAUGSPANNANLAGE\R\NFüR DEN SICHEREN TRANSPORT VON WERKSTüCKEN KüRZER ALS 500 MM IN VORSCHUBRICHTUNG, EINSCHL. INTEGRIERTER VENTILATOR, ANTRIEBSLEISTUNG 2,2 KW \R\N\R\NENERGYMANAGEMENT-SYSTEM EMS\R\N\R\NBANDAUFLAGESEITE: LINKS \R\NTERMINAL: FRONTSEITE LINKS \R\NBETRIEBSSPANNUNG: 400 VOLT, 50 HZ\R\N\R\N\R\NBESCHREIBUNG UND BILDER ZEIGEN BEISPIELHAFT DIE MASCHINENSERIE. TATSäCHLICHE KONFIGURATION KANN NACH KUNDENWUNSCH ANGEPASST WERDEN.\R\N\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 7.767 €
Ubicación:
o oszillation motor-connection 24 volt by pwm controllable ( for example: tangential knife ) or
24 volt constant for motor break by st-plug

o 2 relais for maximum 1200 watt by software switchable (up from win pcnc light), 230 volt,
max. 6,0 a / plug (for example air compressor, cooling, exhaust, dust extraction).

o 0 - 10 volt for connecting a hf converter for an high frequency spindle
o 12 status-leds for monitoring all important function (power, toggle, move, x, y, z, c; overheat,

emergency stop, relais: spindle / cooling, short circuit)

o connection possibility of 4 end- or. reference switches and one emergency stop switch

o motor connection by d-sub 9-pin. (c-axis: 15-pin.)

o emergency-stop switch

o overheating protection

o short circuit protection



--------------------------------------------------------------------------------

fresadora fresatrice fraiseuse jyrsintae ???????? ?????? fraisage machin freesmachine frezesanas masina frezavimo masinos ????????? ?????? frezarka freza fraesmaskin frézovací stroj frézka ?????; new ready for operation .gif" alt="Land-specifications / technical data s-1400/t

cnc-router and cnc-engraver / engraving machine


(attention: pictures are showing the type with trapezium spindles, thats the only different to the t-series )





with the purchase of the t-variation of high-z cnc-router you get a proven technology with a certain icing of the cake in tÜv-certified quality. high-z/t cnc-routers are conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed.



because of the used ball screws the high-z/t cnc-machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. at the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible.



with this 3d-cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min.



here's a video on a unloaded drive with the new high-z / t.


this 3d-cnc-milling machine series is usable in the industrial field as well as for works like engraving, milling, drilling, measuring, cutting and measuring out systems as for example adhering of adhesive on 3d outlines.



with the s-1400 cnc-routers you are able to mill in almost all materials. additional linear rail ways from hiwin at x-axis are making the machine extreme stable. with the two trapezium nuts at x and y axis you are able to adjust backlash too.



high quality components and a optional underframe leave none wishes open. so you are able to do that too: milling in a big metall sheet cabinet. work further like a professional and arrange a demonstration today in our house.



all cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. also, all machines are equipped with an emergency stop button. an additional emergency stop you find in front of the controller.






basic equipment of all high-z cnc-milling machines:


software construcam-3d limited ( from s-720 and s-400/t ) included !!

to use the software cad cam construcam in full screen, you need the milling software version win pcnc economy upward





contact free reference switch and emergency stop button as well as 22mm thick linear guide ways and individually adapted screw nuts !!





--------------------------------------------------------------------------------



equipment / productdetails:





odrive : 4 stepping motor by nanotec with 1600 steps/rev (1/8 step)
o2 motors for constant tension and compression during milling operation on x-axis
oguide ways x 22mm and y axle 30 mm / z axis 16mm, grinded and with 61hrc hardened surface
ofeed through of long workpieces possible, because there's no belt drive at the end of the x-axle

oadditional linear guide rails 15mm from hiwin for the x axis

oball bearings at both sides of ball screws on x and y axis

otraverse speed of rapid feed: max. 7000 mm/min
otechnical resolution : 0,0079375 mm ( 1/8 schritt )
oreversal error max.: +/- 10µm ( 0,01mm )

otable size / clamping area: 1730 x 880 mm
otraverse paths: x=1400 mm; y=780 mm; z= 110 mm
oreference- and limit switch on all axes
odouble safety emergency stop button
oenergy chain for clean cabling
ototal dinemsions incl motors: l x w x h = appr. 1750 x 1040 x 500mm
omilling motor anchorage: euroneck Ø43mm
oincl. software win pcnc light (optional win pcnc economy, usb or professional)

oincl. software construcam-3d limited ( recommended sell price full version 1902.81 eur)

omodular frame for universal application ( shown underframe optional, 980 euro incl vat )
oweight appr. 76 kg
ocomplete machine with included 4 driver microstep controller 4x 2.1 ampere, t-groove plate and kress milling motor 1050 watt incl. 8mm collet

oan approx. 30-minute long introduction during pick up and an unlimted telephone support are included.

oan approx. 2 hours long introduction and an installation of software on your brought note book/ pc as well as a explanation of fundamental terms of corel draw etc. possible, too.



--------------------------------------------------------------------------------



technical data contained in the price tÜv-certified control system, tailored to the cnc milling machine / cnc engraving machine:



o 4-channel stepper motor -cnc-controller with actual smd-technology

o main voltage 115 - 240 volt / 47 - 63 hz.

o motor current 4 x 3,5 ampere

o microstep controller resolution 1/10-step / 2000 steps/rev.

o 4 connections for 4 brushless motor / stepper motor

o connection with parallel port and software win pcnc light, economy or usb with win pcnc usb or

profi version. ( also possible:mach3, usbcnc, nc-easy linux emc and linux cnc and much other

stepper driver software.)

o "sleep-function" for controlling current down

o oszillation motor-connection 24 volt by pwm controllable ( for example: tangential knife ) or
24 volt constant for motor break by st-plug

o 2 relais for maximum 1200 watt by software switchable (up from win pcnc light), 230 volt,
max. 6,0 a / plug (for example air compressor, cooling, exhaust, dust extraction).

o 0 - 10 volt for connecting a hf converter for an high frequency spindle
o 12 status-leds for monitoring all important function (power, toggle, move, x, y, z, c; overheat,

emergency stop, relais: spindle / cooling, short circuit)

o connection possibility of 4 end- or. reference switches and one emergency stop switch

o motor connection by d-sub 9-pin. (c-axis: 15-pin.)

o emergency-stop switch

o overheating protection

o short circuit protection



--------------------------------------------------------------------------------

fresadora fresatrice fraiseuse jyrsintae ???????? ?????? fraisage machin freesmachine frezesanas masina frezavimo masinos ????????? ?????? frezarka freza fraesmaskin frézovací stroj frézka ?????; new ready for operation " style="height: 18px;"> SPECIFICATIONS / TECHNICAL DATA S-1400/T

CNC-ROUTER AND CNC-ENGRAVER / ENGRAVING MACHINE


(ATTENTION: PICTURES ARE SHOWING THE TYPE WITH TRAPEZIUM SPINDLES, THATS THE ONLY DIFFERENT TO THE T-SERIES )





WITH THE PURCHASE OF THE T-VARIATION OF HIGH-Z CNC-ROUTER YOU GET A PROVEN TECHNOLOGY WITH A CERTAIN ICING OF THE CAKE IN TÜV-CERTIFIED QUALITY. HIGH-Z/T CNC-ROUTERS ARE CONCEIVED FOR ONCE MORE PRECISION (REPETITION PRECISION APPROX. 0,02MM) AND ESPECIALLY FOR HIGHER TRAVERSE SPEED.



BECAUSE OF THE USED BALL SCREWS THE HIGH-Z/T CNC-MACHINES ACHIEVES A FANTASTIC PRECISION AND AN ALMOST UNMEASURABLE BACK LASH OF APPROX. 0,01MM. AT THE SAME TIME THERE ARE HIGH TRAVERSE SPEEDS UP TO APPROX. 108MM / SEC. ( 6.500 MM/MIN ) POSSIBLE.



WITH THIS 3D-CNC-MACHINE YOU'RE ABLE TO CARRY OUT AN ENGRAVE AND MILL SPEEDS OF APPROX. 4500 MM/MIN. AND EXPRESS TRAVELS UP TO 6500MM/MIN.



HERE'S A VIDEO ON A UNLOADED DRIVE WITH THE NEW HIGH-Z / T.


THIS 3D-CNC-MILLING MACHINE SERIES IS USABLE IN THE INDUSTRIAL FIELD AS WELL AS FOR WORKS LIKE ENGRAVING, MILLING, DRILLING, MEASURING, CUTTING AND MEASURING OUT SYSTEMS AS FOR EXAMPLE ADHERING OF ADHESIVE ON 3D OUTLINES.



WITH THE S-1400 CNC-ROUTERS YOU ARE ABLE TO MILL IN ALMOST ALL MATERIALS. ADDITIONAL LINEAR RAIL WAYS FROM HIWIN AT X-AXIS ARE MAKING THE MACHINE EXTREME STABLE. WITH THE TWO TRAPEZIUM NUTS AT X AND Y AXIS YOU ARE ABLE TO ADJUST BACKLASH TOO.



HIGH QUALITY COMPONENTS AND A OPTIONAL UNDERFRAME LEAVE NONE WISHES OPEN. SO YOU ARE ABLE TO DO THAT TOO: MILLING IN A BIG METALL SHEET CABINET. WORK FURTHER LIKE A PROFESSIONAL AND ARRANGE A DEMONSTRATION TODAY IN OUR HOUSE.



ALL CNC-MACHINES ARE BEING DELIVERED WITH BLACK ENERGY-CHAINS ON ALL AXIS, WHICH ALLOWS A BETTER CABLING MANAGEMENT. ALSO, ALL MACHINES ARE EQUIPPED WITH AN EMERGENCY STOP BUTTON. AN ADDITIONAL EMERGENCY STOP YOU FIND IN FRONT OF THE CONTROLLER.






BASIC EQUIPMENT OF ALL HIGH-Z CNC-MILLING MACHINES:


SOFTWARE CONSTRUCAM-3D LIMITED ( FROM S-720 AND S-400/T ) INCLUDED !!

TO USE THE SOFTWARE CAD CAM CONSTRUCAM IN FULL SCREEN, YOU NEED THE MILLING SOFTWARE VERSION WIN PCNC ECONOMY UPWARD





CONTACT FREE REFERENCE SWITCH AND EMERGENCY STOP BUTTON AS WELL AS 22MM THICK LINEAR GUIDE WAYS AND INDIVIDUALLY ADAPTED SCREW NUTS !!





--------------------------------------------------------------------------------



EQUIPMENT / PRODUCTDETAILS:





ODRIVE : 4 STEPPING MOTOR BY NANOTEC WITH 1600 STEPS/REV (1/8 STEP)
O2 MOTORS FOR CONSTANT TENSION AND COMPRESSION DURING MILLING OPERATION ON X-AXIS
OGUIDE WAYS X 22MM AND Y AXLE 30 MM / Z AXIS 16MM, GRINDED AND WITH 61HRC HARDENED SURFACE
OFEED THROUGH OF LONG WORKPIECES POSSIBLE, BECAUSE THERE'S NO BELT DRIVE AT THE END OF THE X-AXLE

OADDITIONAL LINEAR GUIDE RAILS 15MM FROM HIWIN FOR THE X AXIS

OBALL BEARINGS AT BOTH SIDES OF BALL SCREWS ON X AND Y AXIS

OTRAVERSE SPEED OF RAPID FEED: MAX. 7000 MM/MIN
OTECHNICAL RESOLUTION : 0,0079375 MM ( 1/8 SCHRITT )
OREVERSAL ERROR MAX.: +/- 10µM ( 0,01MM )

OTABLE SIZE / CLAMPING AREA: 1730 X 880 MM
OTRAVERSE PATHS: X=1400 MM; Y=780 MM; Z= 110 MM
OREFERENCE- AND LIMIT SWITCH ON ALL AXES
ODOUBLE SAFETY EMERGENCY STOP BUTTON
OENERGY CHAIN FOR CLEAN CABLING
OTOTAL DINEMSIONS INCL MOTORS: L X W X H = APPR. 1750 X 1040 X 500MM
OMILLING MOTOR ANCHORAGE: EURONECK Ø43MM
OINCL. SOFTWARE WIN PCNC LIGHT (OPTIONAL WIN PCNC ECONOMY, USB OR PROFESSIONAL)

OINCL. SOFTWARE CONSTRUCAM-3D LIMITED ( RECOMMENDED SELL PRICE FULL VERSION 1902.81 EUR)

OMODULAR FRAME FOR UNIVERSAL APPLICATION ( SHOWN UNDERFRAME OPTIONAL, 980 EURO INCL VAT )
OWEIGHT APPR. 76 KG
OCOMPLETE MACHINE WITH INCLUDED 4 DRIVER MICROSTEP CONTROLLER 4X 2.1 AMPERE, T-GROOVE PLATE AND KRESS MILLING MOTOR 1050 WATT INCL. 8MM COLLET

OAN APPROX. 30-MINUTE LONG INTRODUCTION DURING PICK UP AND AN UNLIMTED TELEPHONE SUPPORT ARE INCLUDED.

OAN APPROX. 2 HOURS LONG INTRODUCTION AND AN INSTALLATION OF SOFTWARE ON YOUR BROUGHT NOTE BOOK/ PC AS WELL AS A EXPLANATION OF FUNDAMENTAL TERMS OF COREL DRAW ETC. POSSIBLE, TOO.



--------------------------------------------------------------------------------



TECHNICAL DATA CONTAINED IN THE PRICE TÜV-CERTIFIED CONTROL SYSTEM, TAILORED TO THE CNC MILLING MACHINE / CNC ENGRAVING MACHINE:



O 4-CHANNEL STEPPER MOTOR -CNC-CONTROLLER WITH ACTUAL SMD-TECHNOLOGY

O MAIN VOLTAGE 115 - 240 VOLT / 47 - 63 HZ.

O MOTOR CURRENT 4 X 3,5 AMPERE

O MICROSTEP CONTROLLER RESOLUTION 1/10-STEP / 2000 STEPS/REV.

O 4 CONNECTIONS FOR 4 BRUSHLESS MOTOR / STEPPER MOTOR

O CONNECTION WITH PARALLEL PORT AND SOFTWARE WIN PCNC LIGHT, ECONOMY OR USB WITH WIN PCNC USB OR

PROFI VERSION. ( ALSO POSSIBLE:MACH3, USBCNC, NC-EASY LINUX EMC AND LINUX CNC AND MUCH OTHER

STEPPER DRIVER SOFTWARE.)

O "SLEEP-FUNCTION" FOR CONTROLLING CURRENT DOWN

O OSZILLATION MOTOR-CONNECTION 24 VOLT BY PWM CONTROLLABLE ( FOR EXAMPLE: TANGENTIAL KNIFE ) OR
24 VOLT CONSTANT FOR MOTOR BREAK BY ST-PLUG

O 2 RELAIS FOR MAXIMUM 1200 WATT BY SOFTWARE SWITCHABLE (UP FROM WIN PCNC LIGHT), 230 VOLT,
MAX. 6,0 A / PLUG (FOR EXAMPLE AIR COMPRESSOR, COOLING, EXHAUST, DUST EXTRACTION).

O 0 - 10 VOLT FOR CONNECTING A HF CONVERTER FOR AN HIGH FREQUENCY SPINDLE
O 12 STATUS-LEDS FOR MONITORING ALL IMPORTANT FUNCTION (POWER, TOGGLE, MOVE, X, Y, Z, C; OVERHEAT,

EMERGENCY STOP, RELAIS: SPINDLE / COOLING, SHORT CIRCUIT)

O CONNECTION POSSIBILITY OF 4 END- OR. REFERENCE SWITCHES AND ONE EMERGENCY STOP SWITCH

O MOTOR CONNECTION BY D-SUB 9-PIN. (C-AXIS: 15-PIN.)

O EMERGENCY-STOP SWITCH

O OVERHEATING PROTECTION

O SHORT CIRCUIT PROTECTION



--------------------------------------------------------------------------------

FRESADORA FRESATRICE FRAISEUSE JYRSINTAE ???????? ?????? FRAISAGE MACHIN FREESMACHINE FREZESANAS MASINA FREZAVIMO MASINOS ????????? ?????? FREZARKA FREZA FRAESMASKIN FRéZOVACí STROJ FRéZKA ?????; NEW READY FOR OPERATION
Vendedor: CNC-STEP GmbH & Co. KG
Año de construcción: usado
Precio: 29.900 €
Ubicación: Land-single sided edge banding machine\r\nbrand: ott\r\ntype: xm 2510 f\r\nyear: 2006\r\nright hand machine\r\n\r\nfor banding and processing :\r\nveneer, plastic and massive edges.\r\nedge thickness: 0,2 - 25 mm\r\n\r\ntechnical data: \r\n\r\nworkpiece dimensions:\r\nwidth min.: 70 mm\r\nheight min.: 8 mm\r\nheight max.: 60 mm\r\nlenght min.: 150 mm\r\nfeed speed: 10- 20 m/min - stepless\r\nworking height: 880 mm\r\ncompressed air supply: 6 bar 1 / 4 \r\n\r\nmachine dimensions:\r\nmachine height: 1.500 mm\r\nmachine width: 1.250 mm\r\nmachine length: 9.850 mm\r\nmachine weight: approx. 5.200 kg\r\n\r\nmachine equipped with:\r\n- double roller top pressure with electronical positioning\r\n- pneumat. control of all units from the central touch screen operation via beckhoff industry pc\r\n\r\n- cm - combimelt - gluing system:\r\nsuitable for the process of eva and pur hot melt as well as all usual cleaning granulates. several kind of glues with several working parameters (like dosing volume, pre-melting and working temperatures) are processable via individual working programs. \r\nbasic equipment: tank 2,5 l with filling pipe\r\n\r\ncontrol system\r\n- operation/control via a 15 inch coloured-touch-monitor, unlimited number of working programs alphanumeric memorizable, with several preselections for the processing units as well as working parameters for combi-melt - gluing system for full automatization and max. operation comfort. single frequency inverter for the individual switch of single processing motors.\r\n- hole recognition for blank out of cnc processings, cuts and similar steps (up to a route of 80mm) \r\n- network-compatible\r\n\r\nprocessing units\r\npremilling for process of chip board with 2 hf motors 2 x 3,0 kw, 12000 n, in working- and counter-working direction, distance controlled\r\n\r\nedge magazine for the automatical supply of strip edges with spiked rollers feed and pneumat. pressure beams. inclusive optical edge monitoring\r\nautomatical coil magazine\r\nautomatical stop of coil feed\r\n\r\nend trimming unit with 2 hf motors 250 hz, 14000 n, motors and saw blades pneumatical swivable via selector switch at operation panel or via program integration\r\n\r\nflush milling unit with 2 hf motors á 1,9 kw, 12000 n, 200 hz, for edge thickness up to 25 mm.\r\n\r\nmilling unit for fine or chamfer milling of massive edges, plastic and veneer edges,  chamfer depth adjustment  via program control 0-3 mm stepless. cleaning spindle function for rough milled massive wood edges with fine correction via operation panel with 2 hf-motors 0,75 kw, 250 hz, 14000n, 0 - 45 ° swivable, tracing on 2-sides.\r\n\r\nmillling unit for upper and lower lengthwise milling of radii on plastic, pvc and wood edges. with tracing on 2 sides and pneumatical postitioning via the control programm. with 2 hf-motors 0,4 kw 250 hz/14000 n, with fix tilt of  working spindles - 25° -.\r\n\r\nscraping unit\r\n\r\ncontour trimming with two separate working spindles for top or bottom. for the radius processing of frontal and rear fronts or postforming process. milling heads equipped with two automatical adjustable axes for depth and front adjustment as well with automatical edge thickness adjustment. detailed adjustments in processing programs memorizable.\r\n\r\nflat scraping unit with fine tracing device for hot melt rests remove in the area of joint with suction.\r\n\r\nrs cleaning set with 4 -fold spraying devices and fine buffing units for cleaning the surface\r\n- as - antistatic spraying device 2 fold, on glued joint\r\n\r\nuniversal milling unit\r\nfor grooving, rebating, profiling, with 1 hf-motor 3,5 kw, 150 hz, 8500 n, 30 mm spindle diameter 0 - 90° swivable, either in working or counter working direction. use control for fronts or sides via operator guidance - without tools.\r\n\r\nuniversal milling unit\r\nfor grooving, rebating, profiling, with 1 hf-motor 3,5 kw, 150 hz, 8500 n, 30 mm spindle diameter 0 - 90° swivable, either in working or counter working direction. use control for fronts or sides via operator guidance - without tools.\r\n\r\nautomat. lubrification\r\nheated infeed fence\r\n2-fold-magazine, automatical coil supply stop, for feed of each one edge coil with 800 and 400 mm diameter. with automatical change of coils via the operation panel.\r\n\r\nspecials:\r\nthe gluing height will be risen on a max. panel thickness of 65 mm. the standard process in the area of end trimming lengthwise process - milling and both scraping units are considered. on 65 mm thick panel materials max. 1 mm pvc edges should be processed. therefore a hold-down, back-moving device and cutting system is changed.\r\n\r\nautomatical contour trimming and rough milling unit can only process a panel thickness of 60 mm \r\n\r\n\r\nnote:\r\nthe specifications and descriptions are a copy of the order confirmation at that time. datas are for information and are not binding.\r\n\r\n SINGLE SIDED EDGE BANDING MACHINE\R\NBRAND: OTT\R\NTYPE: XM 2510 F\R\NYEAR: 2006\R\NRIGHT HAND MACHINE\R\N\R\NFOR BANDING AND PROCESSING :\R\NVENEER, PLASTIC AND MASSIVE EDGES.\R\NEDGE THICKNESS: 0,2 - 25 MM\R\N\R\NTECHNICAL DATA: \R\N\R\NWORKPIECE DIMENSIONS:\R\NWIDTH MIN.: 70 MM\R\NHEIGHT MIN.: 8 MM\R\NHEIGHT MAX.: 60 MM\R\NLENGHT MIN.: 150 MM\R\NFEED SPEED: 10- 20 M/MIN - STEPLESS\R\NWORKING HEIGHT: 880 MM\R\NCOMPRESSED AIR SUPPLY: 6 BAR 1 / 4 \R\N\R\NMACHINE DIMENSIONS:\R\NMACHINE HEIGHT: 1.500 MM\R\NMACHINE WIDTH: 1.250 MM\R\NMACHINE LENGTH: 9.850 MM\R\NMACHINE WEIGHT: APPROX. 5.200 KG\R\N\R\NMACHINE EQUIPPED WITH:\R\N- DOUBLE ROLLER TOP PRESSURE WITH ELECTRONICAL POSITIONING\R\N- PNEUMAT. CONTROL OF ALL UNITS FROM THE CENTRAL TOUCH SCREEN OPERATION VIA BECKHOFF INDUSTRY PC\R\N\R\N- CM - COMBIMELT - GLUING SYSTEM:\R\NSUITABLE FOR THE PROCESS OF EVA AND PUR HOT MELT AS WELL AS ALL USUAL CLEANING GRANULATES. SEVERAL KIND OF GLUES WITH SEVERAL WORKING PARAMETERS (LIKE DOSING VOLUME, PRE-MELTING AND WORKING TEMPERATURES) ARE PROCESSABLE VIA INDIVIDUAL WORKING PROGRAMS. \R\NBASIC EQUIPMENT: TANK 2,5 L WITH FILLING PIPE\R\N\R\NCONTROL SYSTEM\R\N- OPERATION/CONTROL VIA A 15 INCH COLOURED-TOUCH-MONITOR, UNLIMITED NUMBER OF WORKING PROGRAMS ALPHANUMERIC MEMORIZABLE, WITH SEVERAL PRESELECTIONS FOR THE PROCESSING UNITS AS WELL AS WORKING PARAMETERS FOR COMBI-MELT - GLUING SYSTEM FOR FULL AUTOMATIZATION AND MAX. OPERATION COMFORT. SINGLE FREQUENCY INVERTER FOR THE INDIVIDUAL SWITCH OF SINGLE PROCESSING MOTORS.\R\N- HOLE RECOGNITION FOR BLANK OUT OF CNC PROCESSINGS, CUTS AND SIMILAR STEPS (UP TO A ROUTE OF 80MM) \R\N- NETWORK-COMPATIBLE\R\N\R\NPROCESSING UNITS\R\NPREMILLING FOR PROCESS OF CHIP BOARD WITH 2 HF MOTORS 2 X 3,0 KW, 12000 N, IN WORKING- AND COUNTER-WORKING DIRECTION, DISTANCE CONTROLLED\R\N\R\NEDGE MAGAZINE FOR THE AUTOMATICAL SUPPLY OF STRIP EDGES WITH SPIKED ROLLERS FEED AND PNEUMAT. PRESSURE BEAMS. INCLUSIVE OPTICAL EDGE MONITORING\R\NAUTOMATICAL COIL MAGAZINE\R\NAUTOMATICAL STOP OF COIL FEED\R\N\R\NEND TRIMMING UNIT WITH 2 HF MOTORS 250 HZ, 14000 N, MOTORS AND SAW BLADES PNEUMATICAL SWIVABLE VIA SELECTOR SWITCH AT OPERATION PANEL OR VIA PROGRAM INTEGRATION\R\N\R\NFLUSH MILLING UNIT WITH 2 HF MOTORS á 1,9 KW, 12000 N, 200 HZ, FOR EDGE THICKNESS UP TO 25 MM.\R\N\R\NMILLING UNIT FOR FINE OR CHAMFER MILLING OF MASSIVE EDGES, PLASTIC AND VENEER EDGES, CHAMFER DEPTH ADJUSTMENT VIA PROGRAM CONTROL 0-3 MM STEPLESS. CLEANING SPINDLE FUNCTION FOR ROUGH MILLED MASSIVE WOOD EDGES WITH FINE CORRECTION VIA OPERATION PANEL WITH 2 HF-MOTORS 0,75 KW, 250 HZ, 14000N, 0 - 45 ° SWIVABLE, TRACING ON 2-SIDES.\R\N\R\NMILLLING UNIT FOR UPPER AND LOWER LENGTHWISE MILLING OF RADII ON PLASTIC, PVC AND WOOD EDGES. WITH TRACING ON 2 SIDES AND PNEUMATICAL POSTITIONING VIA THE CONTROL PROGRAMM. WITH 2 HF-MOTORS 0,4 KW 250 HZ/14000 N, WITH FIX TILT OF WORKING SPINDLES - 25° -.\R\N\R\NSCRAPING UNIT\R\N\R\NCONTOUR TRIMMING WITH TWO SEPARATE WORKING SPINDLES FOR TOP OR BOTTOM. FOR THE RADIUS PROCESSING OF FRONTAL AND REAR FRONTS OR POSTFORMING PROCESS. MILLING HEADS EQUIPPED WITH TWO AUTOMATICAL ADJUSTABLE AXES FOR DEPTH AND FRONT ADJUSTMENT AS WELL WITH AUTOMATICAL EDGE THICKNESS ADJUSTMENT. DETAILED ADJUSTMENTS IN PROCESSING PROGRAMS MEMORIZABLE.\R\N\R\NFLAT SCRAPING UNIT WITH FINE TRACING DEVICE FOR HOT MELT RESTS REMOVE IN THE AREA OF JOINT WITH SUCTION.\R\N\R\NRS CLEANING SET WITH 4 -FOLD SPRAYING DEVICES AND FINE BUFFING UNITS FOR CLEANING THE SURFACE\R\N- AS - ANTISTATIC SPRAYING DEVICE 2 FOLD, ON GLUED JOINT\R\N\R\NUNIVERSAL MILLING UNIT\R\NFOR GROOVING, REBATING, PROFILING, WITH 1 HF-MOTOR 3,5 KW, 150 HZ, 8500 N, 30 MM SPINDLE DIAMETER 0 - 90° SWIVABLE, EITHER IN WORKING OR COUNTER WORKING DIRECTION. USE CONTROL FOR FRONTS OR SIDES VIA OPERATOR GUIDANCE - WITHOUT TOOLS.\R\N\R\NUNIVERSAL MILLING UNIT\R\NFOR GROOVING, REBATING, PROFILING, WITH 1 HF-MOTOR 3,5 KW, 150 HZ, 8500 N, 30 MM SPINDLE DIAMETER 0 - 90° SWIVABLE, EITHER IN WORKING OR COUNTER WORKING DIRECTION. USE CONTROL FOR FRONTS OR SIDES VIA OPERATOR GUIDANCE - WITHOUT TOOLS.\R\N\R\NAUTOMAT. LUBRIFICATION\R\NHEATED INFEED FENCE\R\N2-FOLD-MAGAZINE, AUTOMATICAL COIL SUPPLY STOP, FOR FEED OF EACH ONE EDGE COIL WITH 800 AND 400 MM DIAMETER. WITH AUTOMATICAL CHANGE OF COILS VIA THE OPERATION PANEL.\R\N\R\NSPECIALS:\R\NTHE GLUING HEIGHT WILL BE RISEN ON A MAX. PANEL THICKNESS OF 65 MM. THE STANDARD PROCESS IN THE AREA OF END TRIMMING LENGTHWISE PROCESS - MILLING AND BOTH SCRAPING UNITS ARE CONSIDERED. ON 65 MM THICK PANEL MATERIALS MAX. 1 MM PVC EDGES SHOULD BE PROCESSED. THEREFORE A HOLD-DOWN, BACK-MOVING DEVICE AND CUTTING SYSTEM IS CHANGED.\R\N\R\NAUTOMATICAL CONTOUR TRIMMING AND ROUGH MILLING UNIT CAN ONLY PROCESS A PANEL THICKNESS OF 60 MM \R\N\R\N\R\NNOTE:\R\NTHE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATAS ARE FOR INFORMATION AND ARE NOT BINDING.\R\N\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more SCREEN types: