185 ofertas

Año de construcción: usado
Ubicación: Land-mobile slow-speed shredder.
diesel engine: 490 hp

more capacity and torque than the standard version of dw 3060 buffalo.

rear discharge conveyor with overband magnetic separator
comb lengthening
hydr. self-propelled drive (crawler gear)
radio remote control MOBILE SLOW-SPEED SHREDDER. DIESEL ENGINE: 490 HP MORE CAPACITY AND TORQUE THAN THE STANDARD VERSION OF DW 3060 BUFFALO. REAR DISCHARGE CONVEYOR WITH OVERBAND MAGNETIC SEPARATOR COMB LENGTHENING HYDR. SELF-PROPELLED DRIVE (CRAWLER GEAR) RADIO REMOTE CONTROL
Vendedor: Hawamex Recycling und Umwelttechnik GmbH & Co. KG
Año de construcción: usado
Precio: 3.900 €
Ubicación: Land-manufacturer de breuk<br/>typ av-45/80<br/>year of construction 1990<br/>driving motor 45 kw<br/>screen size 95 x 30 mm<br/>in use for shred of paper, books, complete document files etc. <br/>comments: inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER DE BREUK
TYP AV-45/80
YEAR OF CONSTRUCTION 1990
DRIVING MOTOR 45 KW
SCREEN SIZE 95 X 30 MM
IN USE FOR SHRED OF PAPER, BOOKS, COMPLETE DOCUMENT FILES ETC.
COMMENTS: INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 8.900 €
Ubicación: Land-aztech is a leading manufacturer of industrial machinery on the polish and foreign markets. our company deals with sale of new and used machines, which are covered by 12 months warranty, as well as a service after the warranty period.  in our offer you will find also spare parts for machines.
hammer crusher with horizontal effect of a number of highly effective, we can produce not big dimensions even 25 tonnes per hour (other versions up to 200 tons per hour). it is a machine for crushing of medium and fine grains. its maximum load is 300 mm (other versions up to 1000 mm), allowing the possibility to obtain a finished product with a grit that is adapted to your needs thanks to the movable rack (in the form of a thick from 0.5 mm up to 50 mm to the outlet sieve) at the material outlet. the crusher is used to chop up hard, medium-hard and soft raw materials with low moisture content, such as: limestone, granite, asphalt, charcoal, coal e, stone, concrete, brick, ceramic tiles, aluminium.                                                                                                                                                  we have different kinds of new, never used hammer crushers with different capacities and capabilities in continuous sale.
model - km/po/e-400 x 600 net price: â?¬8.900,00
the most important features: hammers and side walls are made of durable manganese-steel manufactured.
the dimensions of the bottom sieve can be adjusted according to the product group.

admission: 400 x 600 mm
load size (mm) - up to 550
finished product (mm) - 0.5-50
capacity (t / st) - up to 15
motor (kw) - 18.5
weight (kg) - 1700
note:
1. the specified yield refers to a material with a density of 1000 kg / m3.
2. our products are constantly updated and improved, az tech sp. z o.o. reserves the right to, parameters and design without prior notification of the user; 
3. the above product configuration is not a default configuration. at the time of purchase, request a detailed consultation.
we invite you to familiarize yourself with our offer and to visit our outlet in the province of province.
if no machines are in our offer, whose technical parameters match your requirements, using create and we make them happy for you.
machines are usually immediately ex stock available or available within a few weeks. we produce the most popular models ever.
we invite you to contact us.
your conversation partner tel: 570 884 633

AZTECH IS A LEADING MANUFACTURER OF INDUSTRIAL MACHINERY ON THE POLISH AND FOREIGN MARKETS. OUR COMPANY DEALS WITH SALE OF NEW AND USED MACHINES, WHICH ARE COVERED BY 12 MONTHS WARRANTY, AS WELL AS A SERVICE AFTER THE WARRANTY PERIOD. IN OUR OFFER YOU WILL FIND ALSO SPARE PARTS FOR MACHINES. HAMMER CRUSHER WITH HORIZONTAL EFFECT OF A NUMBER OF HIGHLY EFFECTIVE, WE CAN PRODUCE NOT BIG DIMENSIONS EVEN 25 TONNES PER HOUR (OTHER VERSIONS UP TO 200 TONS PER HOUR). IT IS A MACHINE FOR CRUSHING OF MEDIUM AND FINE GRAINS. ITS MAXIMUM LOAD IS 300 MM (OTHER VERSIONS UP TO 1000 MM), ALLOWING THE POSSIBILITY TO OBTAIN A FINISHED PRODUCT WITH A GRIT THAT IS ADAPTED TO YOUR NEEDS THANKS TO THE MOVABLE RACK (IN THE FORM OF A THICK FROM 0.5 MM UP TO 50 MM TO THE OUTLET SIEVE) AT THE MATERIAL OUTLET. THE CRUSHER IS USED TO CHOP UP HARD, MEDIUM-HARD AND SOFT RAW MATERIALS WITH LOW MOISTURE CONTENT, SUCH AS: LIMESTONE, GRANITE, ASPHALT, CHARCOAL, COAL E, STONE, CONCRETE, BRICK, CERAMIC TILES, ALUMINIUM. WE HAVE DIFFERENT KINDS OF NEW, NEVER USED HAMMER CRUSHERS WITH DIFFERENT CAPACITIES AND CAPABILITIES IN CONTINUOUS SALE. MODEL - KM/PO/E-400 X 600 NET PRICE: &ACIRC;?&NOT;8.900,00 THE MOST IMPORTANT FEATURES: HAMMERS AND SIDE WALLS ARE MADE OF DURABLE MANGANESE-STEEL MANUFACTURED. THE DIMENSIONS OF THE BOTTOM SIEVE CAN BE ADJUSTED ACCORDING TO THE PRODUCT GROUP. ADMISSION: 400 X 600 MM LOAD SIZE (MM) - UP TO 550 FINISHED PRODUCT (MM) - 0.5-50 CAPACITY (T / ST) - UP TO 15 MOTOR (KW) - 18.5 WEIGHT (KG) - 1700 NOTE: 1. THE SPECIFIED YIELD REFERS TO A MATERIAL WITH A DENSITY OF 1000 KG / M3. 2. OUR PRODUCTS ARE CONSTANTLY UPDATED AND IMPROVED, AZ TECH SP. Z O.O. RESERVES THE RIGHT TO, PARAMETERS AND DESIGN WITHOUT PRIOR NOTIFICATION OF THE USER; 3. THE ABOVE PRODUCT CONFIGURATION IS NOT A DEFAULT CONFIGURATION. AT THE TIME OF PURCHASE, REQUEST A DETAILED CONSULTATION. WE INVITE YOU TO FAMILIARIZE YOURSELF WITH OUR OFFER AND TO VISIT OUR OUTLET IN THE PROVINCE OF PROVINCE. IF NO MACHINES ARE IN OUR OFFER, WHOSE TECHNICAL PARAMETERS MATCH YOUR REQUIREMENTS, USING CREATE AND WE MAKE THEM HAPPY FOR YOU. MACHINES ARE USUALLY IMMEDIATELY EX STOCK AVAILABLE OR AVAILABLE WITHIN A FEW WEEKS. WE PRODUCE THE MOST POPULAR MODELS EVER. WE INVITE YOU TO CONTACT US. YOUR CONVERSATION PARTNER TEL: 570 884 633
Vendedor: Frau Iwona Wo?kowicz
Año de construcción: usado
Ubicación: Land-manufacturer: vecoplan  streifenhacker, year: ca.1998, number of rotors: 1, knife type: wendemesser, kw power rotor: ca.7,5, feeding roller: 2, kw power feeding roller: 0,75, hopper volume: ca.400 x 200, rotations u/min: ca.2500, feeding width mm: ca.400, year :ca.1998 MANUFACTURER: VECOPLAN STREIFENHACKER, YEAR: CA.1998, NUMBER OF ROTORS: 1, KNIFE TYPE: WENDEMESSER, KW POWER ROTOR: CA.7,5, FEEDING ROLLER: 2, KW POWER FEEDING ROLLER: 0,75, HOPPER VOLUME: CA.400 X 200, ROTATIONS U/MIN: CA.2500, FEEDING WIDTH MM: CA.400, YEAR :CA.1998
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Precio: 8.900 €
Ubicación: Land-aztech is a leading manufacturer of industrial machinery on the polish and foreign markets. our company deals with sale of new and used machines, which are covered by 12 months warranty, as well as a service after the warranty period.  in our offer you will find also spare parts for machines.
hammer crusher with horizontal effect of a number of highly effective, we can produce not big dimensions even 25 tonnes per hour (other versions up to 200 tons per hour). it is a machine for crushing of medium and fine grains. its maximum load is 300 mm (other versions up to 1000 mm), allowing the possibility to obtain a finished product with a grit that is adapted to your needs thanks to the movable rack (in the form of a thick from 0.5 mm up to 50 mm to the outlet sieve) at the material outlet. the crusher is used to chop up hard, medium-hard and soft raw materials with low moisture content, such as: limestone, granite, asphalt, charcoal, coal e, stone, concrete, brick, ceramic tiles, aluminium.                                                                                                                                                  we have different kinds of new, never used hammer crushers with different capacities and capabilities in continuous sale.
model - km/po/e-400 x 600 net price: â?¬8.900,00
the most important features: hammers and side walls are made of durable manganese-steel manufactured.
the dimensions of the bottom sieve can be adjusted according to the product group.

admission: 400 x 600 mm
load size (mm) - up to 550
finished product (mm) - 0.5-50
capacity (t / st) - up to 15
motor (kw) - 18.5
weight (kg) - 1700
note:
1. the specified yield refers to a material with a density of 1000 kg / m3.
2. our products are constantly updated and improved, az tech sp. z o.o. reserves the right to, parameters and design without prior notification of the user; 
3. the above product configuration is not a default configuration. at the time of purchase, request a detailed consultation.
we invite you to familiarize yourself with our offer and to visit our outlet in the province of province.
if no machines are in our offer, whose technical parameters match your requirements, using create and we make them happy for you.
machines are usually immediately ex stock available or available within a few weeks. we produce the most popular models ever.
we invite you to contact us.
your conversation partner tel: 570 884 633

AZTECH IS A LEADING MANUFACTURER OF INDUSTRIAL MACHINERY ON THE POLISH AND FOREIGN MARKETS. OUR COMPANY DEALS WITH SALE OF NEW AND USED MACHINES, WHICH ARE COVERED BY 12 MONTHS WARRANTY, AS WELL AS A SERVICE AFTER THE WARRANTY PERIOD. IN OUR OFFER YOU WILL FIND ALSO SPARE PARTS FOR MACHINES. HAMMER CRUSHER WITH HORIZONTAL EFFECT OF A NUMBER OF HIGHLY EFFECTIVE, WE CAN PRODUCE NOT BIG DIMENSIONS EVEN 25 TONNES PER HOUR (OTHER VERSIONS UP TO 200 TONS PER HOUR). IT IS A MACHINE FOR CRUSHING OF MEDIUM AND FINE GRAINS. ITS MAXIMUM LOAD IS 300 MM (OTHER VERSIONS UP TO 1000 MM), ALLOWING THE POSSIBILITY TO OBTAIN A FINISHED PRODUCT WITH A GRIT THAT IS ADAPTED TO YOUR NEEDS THANKS TO THE MOVABLE RACK (IN THE FORM OF A THICK FROM 0.5 MM UP TO 50 MM TO THE OUTLET SIEVE) AT THE MATERIAL OUTLET. THE CRUSHER IS USED TO CHOP UP HARD, MEDIUM-HARD AND SOFT RAW MATERIALS WITH LOW MOISTURE CONTENT, SUCH AS: LIMESTONE, GRANITE, ASPHALT, CHARCOAL, COAL E, STONE, CONCRETE, BRICK, CERAMIC TILES, ALUMINIUM. WE HAVE DIFFERENT KINDS OF NEW, NEVER USED HAMMER CRUSHERS WITH DIFFERENT CAPACITIES AND CAPABILITIES IN CONTINUOUS SALE. MODEL - KM/PO/E-400 X 600 NET PRICE: &ACIRC;?&NOT;8.900,00 THE MOST IMPORTANT FEATURES: HAMMERS AND SIDE WALLS ARE MADE OF DURABLE MANGANESE-STEEL MANUFACTURED. THE DIMENSIONS OF THE BOTTOM SIEVE CAN BE ADJUSTED ACCORDING TO THE PRODUCT GROUP. ADMISSION: 400 X 600 MM LOAD SIZE (MM) - UP TO 550 FINISHED PRODUCT (MM) - 0.5-50 CAPACITY (T / ST) - UP TO 15 MOTOR (KW) - 18.5 WEIGHT (KG) - 1700 NOTE: 1. THE SPECIFIED YIELD REFERS TO A MATERIAL WITH A DENSITY OF 1000 KG / M3. 2. OUR PRODUCTS ARE CONSTANTLY UPDATED AND IMPROVED, AZ TECH SP. Z O.O. RESERVES THE RIGHT TO, PARAMETERS AND DESIGN WITHOUT PRIOR NOTIFICATION OF THE USER; 3. THE ABOVE PRODUCT CONFIGURATION IS NOT A DEFAULT CONFIGURATION. AT THE TIME OF PURCHASE, REQUEST A DETAILED CONSULTATION. WE INVITE YOU TO FAMILIARIZE YOURSELF WITH OUR OFFER AND TO VISIT OUR OUTLET IN THE PROVINCE OF PROVINCE. IF NO MACHINES ARE IN OUR OFFER, WHOSE TECHNICAL PARAMETERS MATCH YOUR REQUIREMENTS, USING CREATE AND WE MAKE THEM HAPPY FOR YOU. MACHINES ARE USUALLY IMMEDIATELY EX STOCK AVAILABLE OR AVAILABLE WITHIN A FEW WEEKS. WE PRODUCE THE MOST POPULAR MODELS EVER. WE INVITE YOU TO CONTACT US. YOUR CONVERSATION PARTNER TEL: 570 884 633
Vendedor: Frau Iwona Wo?kowicz
Año de construcción: usado
Precio: 1.200 €
Ubicación: Land-plummer block housings, plummer block housings, bearing blocks for shredders, shredders, watermill, hackers, granulator, granulator, cutting granulator<br /><br />-2 pieces plummer block housings made of steel for heavy use<br />-type bearing block inner diameter 320 mm<br />-installing bearings designation 22236/22330/23064/23138/23236<br />-installation bearings abbreviations 22236k / 22330k / 23064k / 23138k / 23236k<br />-with shaft seal washers<br />-1x existing used bearing 23138 cck / c3w33 with adapter sleeve h3038<br />-price for both bearings plus accessories<br />-dimensions 560/190 / h395 mm / piece<br />-weight about 200 kg / piece PLUMMER BLOCK HOUSINGS, PLUMMER BLOCK HOUSINGS, BEARING BLOCKS FOR SHREDDERS, SHREDDERS, WATERMILL, HACKERS, GRANULATOR, GRANULATOR, CUTTING GRANULATOR

-2 PIECES PLUMMER BLOCK HOUSINGS MADE OF STEEL FOR HEAVY USE
-TYPE BEARING BLOCK INNER DIAMETER 320 MM
-INSTALLING BEARINGS DESIGNATION 22236/22330/23064/23138/23236
-INSTALLATION BEARINGS ABBREVIATIONS 22236K / 22330K / 23064K / 23138K / 23236K
-WITH SHAFT SEAL WASHERS
-1X EXISTING USED BEARING 23138 CCK / C3W33 WITH ADAPTER SLEEVE H3038
-PRICE FOR BOTH BEARINGS PLUS ACCESSORIES
-DIMENSIONS 560/190 / H395 MM / PIECE
-WEIGHT ABOUT 200 KG / PIECE
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 35.000 €
Ubicación: Land-there is a single-shaft shredder type shredder zss 1200
year of built: 2007, which includes;
1.gebrauchter shredder zerma zss 1200e
about 7,000 hours of operation
built in 2007 with control cabinet
2.gebrauchtes sorting conveyor with metallsuchbrã¼cke s + s
3. form of sheet steel

manufacturer: zerma
power: 55 kw
inlet cross section approx. 1,500 x 1,100 mm
bejlvu7tyt
rotor diameter: 457 mm
rotor width: 1,200 mm
number of rotor blades: 81
weight: 5,500 kg
engine 55 kw
infeed hopper cross-section: length: 1920 mm, width: 1470 mm

suitability: comminution of plastics, waste and recyclables THERE IS A SINGLE-SHAFT SHREDDER TYPE SHREDDER ZSS 1200 YEAR OF BUILT: 2007, WHICH INCLUDES; 1.GEBRAUCHTER SHREDDER ZERMA ZSS 1200E ABOUT 7,000 HOURS OF OPERATION BUILT IN 2007 WITH CONTROL CABINET 2.GEBRAUCHTES SORTING CONVEYOR WITH METALLSUCHBR&ATILDE;&FRAC14;CKE S + S 3. FORM OF SHEET STEEL MANUFACTURER: ZERMA POWER: 55 KW INLET CROSS SECTION APPROX. 1,500 X 1,100 MM BEJLVU7TYT ROTOR DIAMETER: 457 MM ROTOR WIDTH: 1,200 MM NUMBER OF ROTOR BLADES: 81 WEIGHT: 5,500 KG ENGINE 55 KW INFEED HOPPER CROSS-SECTION: LENGTH: 1920 MM, WIDTH: 1470 MM SUITABILITY: COMMINUTION OF PLASTICS, WASTE AND RECYCLABLES
Vendedor: B&W Handelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-cutting width: 2x15   mm 	
year of production: 	2005
productivity: 	app  35 -40 sheet (din a4, 70g/m²) 	
price: 	to inquiry
supply: 400 v/2,2 kw 	
security leve: 	din 66399
p-4/o-3/t-4/e-3/f-1 

englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939   CUTTING WIDTH: 2X15 MM YEAR OF PRODUCTION: 2005 PRODUCTIVITY: APP 35 -40 SHEET (DIN A4, 70G/M²) PRICE: TO INQUIRY SUPPLY: 400 V/2,2 KW SECURITY LEVE: DIN 66399 P-4/O-3/T-4/E-3/F-1 ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 1.200 €
Ubicación: Land-hacker needed
fabr. garcia HACKER NEEDED FABR. GARCIA
Vendedor: S&F GmbH - Siebmaschinen und Fördertechnik
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 10.700 €
Ubicación: Land-thrust ground, crushers, shredders for chipboard, solid wood and the crushed pallets

machine is unfortunately no hour meter, it has gone but obviously still not much

a video of the current machine can be sent on request.

big gl 6
hopper size, approx. 800 x 1000 x 900 mm, throw 1300 x 800 mm
rotor length 800 mm, rotor diameter 252 mm
low-speed
engine 18, 5kw
sieve diameter top 15 mm, 12 mm
shaft 19 knives
the knives are freshly turned and rotate 5 x at least.
dust spout 200 mm
operating instructions
without shown orange cord.
original paint, top condition

dimensions approx. 2100 x 1350 x 1650 mm (lxwxh). weight approx. 1500kg.

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". THRUST GROUND, CRUSHERS, SHREDDERS FOR CHIPBOARD, SOLID WOOD AND THE CRUSHED PALLETS MACHINE IS UNFORTUNATELY NO HOUR METER, IT HAS GONE BUT OBVIOUSLY STILL NOT MUCH A VIDEO OF THE CURRENT MACHINE CAN BE SENT ON REQUEST. BIG GL 6 HOPPER SIZE, APPROX. 800 X 1000 X 900 MM, THROW 1300 X 800 MM ROTOR LENGTH 800 MM, ROTOR DIAMETER 252 MM LOW-SPEED ENGINE 18, 5KW SIEVE DIAMETER TOP 15 MM, 12 MM SHAFT 19 KNIVES THE KNIVES ARE FRESHLY TURNED AND ROTATE 5 X AT LEAST. DUST SPOUT 200 MM OPERATING INSTRUCTIONS WITHOUT SHOWN ORANGE CORD. ORIGINAL PAINT, TOP CONDITION DIMENSIONS APPROX. 2100 X 1350 X 1650 MM (LXWXH). WEIGHT APPROX. 1500KG. PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 7.500 €
Ubicación: Land-large wood chipper type gaz 102/1 / 22

dimensions: 2100 x 1800 x 1700 mm
cabinet and second hole screen with spare blades

ma number: 500-8168
year of constr.: 08.2007
hack power: materials and siebabhã¤ngig
hopper volume: 1.5 mâ³
operating voltage: 400 v, 3 ph
main drive motor power: 37 kw, 1.500 rpm
power hydraulics: 0.75 kw, 1.500 rpm
weight: ca. 2.100 kg
number of tools: 27 piece rotor speed: approx. 90 rpm
rotor diameter: 368 mm
v-belt length: 4 x spb 1900
hydraulic oil: approx. 20 ltr. / hlp 46
oil filling: 4.3 ltr. / shell tivela s320
turbo clutch: 4.0 ltr. / omv atf a
hedging: 63 a
stormaufnahme: 55 a
minimum cable cross-section up to 10 m in length: 16 mmâ²

inlet cross section: length: 1,200 mm
width: 1.00 mm
dust nozzle: diameter 200 mm
 LARGE WOOD CHIPPER TYPE GAZ 102/1 / 22 DIMENSIONS: 2100 X 1800 X 1700 MM CABINET AND SECOND HOLE SCREEN WITH SPARE BLADES MA NUMBER: 500-8168 YEAR OF CONSTR.: 08.2007 HACK POWER: MATERIALS AND SIEBABH&ATILDE;&CURREN;NGIG HOPPER VOLUME: 1.5 M&ACIRC;&SUP3; OPERATING VOLTAGE: 400 V, 3 PH MAIN DRIVE MOTOR POWER: 37 KW, 1.500 RPM POWER HYDRAULICS: 0.75 KW, 1.500 RPM WEIGHT: CA. 2.100 KG NUMBER OF TOOLS: 27 PIECE ROTOR SPEED: APPROX. 90 RPM ROTOR DIAMETER: 368 MM V-BELT LENGTH: 4 X SPB 1900 HYDRAULIC OIL: APPROX. 20 LTR. / HLP 46 OIL FILLING: 4.3 LTR. / SHELL TIVELA S320 TURBO CLUTCH: 4.0 LTR. / OMV ATF A HEDGING: 63 A STORMAUFNAHME: 55 A MINIMUM CABLE CROSS-SECTION UP TO 10 M IN LENGTH: 16 MM&ACIRC;&SUP2; INLET CROSS SECTION: LENGTH: 1,200 MM WIDTH: 1.00 MM DUST NOZZLE: DIAMETER 200 MM
Vendedor: Schutt-KARL GmbH
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-diesel engine: 609 hp

fine shredding  basket / screen
discharge conveyor
lift-axle
radio remote control DIESEL ENGINE: 609 HP FINE SHREDDING BASKET / SCREEN DISCHARGE CONVEYOR LIFT-AXLE RADIO REMOTE CONTROL
Vendedor: Hawamex Recycling und Umwelttechnik GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-this machine can be used for the comminution of plastics, rubber, paper, soft metals and in particular for the pre-, intermediate and final grinding of old cables. THIS MACHINE CAN BE USED FOR THE COMMINUTION OF PLASTICS, RUBBER, PAPER, SOFT METALS AND IN PARTICULAR FOR THE PRE-, INTERMEDIATE AND FINAL GRINDING OF OLD CABLES.
Vendedor: RETO RECYCLINGTECHNIK GmbH
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-stock# up5988 
second hand twin shaft shredder by pallmann (germany) type psd 300. milling chamber has internal dimensions 550 mm x 850 mm. two shafts are driven by el motor 37 kw and gearbox. machine is mounted on carbon steel supports. STOCK# UP5988 SECOND HAND TWIN SHAFT SHREDDER BY PALLMANN (GERMANY) TYPE PSD 300. MILLING CHAMBER HAS INTERNAL DIMENSIONS 550 MM X 850 MM. TWO SHAFTS ARE DRIVEN BY EL MOTOR 37 KW AND GEARBOX. MACHINE IS MOUNTED ON CARBON STEEL SUPPORTS.
Vendedor: Perry Machinery Poland
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-cutting width: 3,9 x 50  mm 	
year of production: 2001
productivity: app 40 sheet (din a4, 70g/m²) 	
price: 	to inquiry
supply: 2300 v / 1.6 kw 	
security leve: 	din 66399 p-3

englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939   CUTTING WIDTH: 3,9 X 50 MM YEAR OF PRODUCTION: 2001 PRODUCTIVITY: APP 40 SHEET (DIN A4, 70G/M²) PRICE: TO INQUIRY SUPPLY: 2300 V / 1.6 KW SECURITY LEVE: DIN 66399 P-3 ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-number 04113

chippers / shredders weima wl 6

used, very good condition
bj. 2010, 4468 operating hours
automatic start-up
motor 22 kw
rotor diameter 252 mm
rotor width 800 mm
rotor speed 90 rpm
v-blade 21 pieces
insertion funnel 1400 x 1200 mm
material shaft 100 x 800 x 1090 mm, approx. 1 m 3
dust nozzle 2 x 200 mm
sieve diameter 30 mm

outer dimensions 2000 x 1300 x 2200 mm lbh, 1.6 to
 
used machinery and equipment without further warranty.
on technical data and year of manufacture warranty!

subject to prior sale

delivery: from stock our general terms and conditions apply, see in the  
 NUMBER 04113 CHIPPERS / SHREDDERS WEIMA WL 6 USED, VERY GOOD CONDITION BJ. 2010, 4468 OPERATING HOURS AUTOMATIC START-UP MOTOR 22 KW ROTOR DIAMETER 252 MM ROTOR WIDTH 800 MM ROTOR SPEED 90 RPM V-BLADE 21 PIECES INSERTION FUNNEL 1400 X 1200 MM MATERIAL SHAFT 100 X 800 X 1090 MM, APPROX. 1 M 3 DUST NOZZLE 2 X 200 MM SIEVE DIAMETER 30 MM OUTER DIMENSIONS 2000 X 1300 X 2200 MM LBH, 1.6 TO USED MACHINERY AND EQUIPMENT WITHOUT FURTHER WARRANTY. ON TECHNICAL DATA AND YEAR OF MANUFACTURE WARRANTY! SUBJECT TO PRIOR SALE DELIVERY: FROM STOCK OUR GENERAL TERMS AND CONDITIONS APPLY, SEE IN THE
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-typcs 4000-data-800schneidwerksabmessung400 x 400mmeinfã¼llã¶ffnung800 x 800mmbeschickungshã¶heca. 2050mmeindrã¼ckvorrichtungmanuellantriebsleistung3. 0 kw / 400 v / 50 hz 16aanzahl messerwellen2 stã¼ckanzahl messer18 stã¼cklochsiebgrã¶sseã? 20mmbaujahr2001maschinenabmessung b x t x h1600 x 1060 x 2050mmmaschinengestell with door (limit switch monitoring) for the park of 800l-containersmaschinengewichtca. 750kg   TYPCS 4000-DATA-800SCHNEIDWERKSABMESSUNG400 X 400MMEINF&ATILDE;&FRAC14;LL&ATILDE;&PARA;FFNUNG800 X 800MMBESCHICKUNGSH&ATILDE;&PARA;HECA. 2050MMEINDR&ATILDE;&FRAC14;CKVORRICHTUNGMANUELLANTRIEBSLEISTUNG3. 0 KW / 400 V / 50 HZ 16AANZAHL MESSERWELLEN2 ST&ATILDE;&FRAC14;CKANZAHL MESSER18 ST&ATILDE;&FRAC14;CKLOCHSIEBGR&ATILDE;&PARA;SSE&ATILDE;? 20MMBAUJAHR2001MASCHINENABMESSUNG B X T X H1600 X 1060 X 2050MMMASCHINENGESTELL WITH DOOR (LIMIT SWITCH MONITORING) FOR THE PARK OF 800L-CONTAINERSMASCHINENGEWICHTCA. 750KG
Vendedor: Hunkeler Systems AG
Año de construcción: usado
Ubicación: Land-this listing is for a 2002 impact air systems rcs-3s shredder. item previously used for waste paper. 

motor: 2x 7.5kw
shafts: 2
hopper size: 55x45mm THIS LISTING IS FOR A 2002 IMPACT AIR SYSTEMS RCS-3S SHREDDER. ITEM PREVIOUSLY USED FOR WASTE PAPER. MOTOR: 2X 7.5KW SHAFTS: 2 HOPPER SIZE: 55X45MM
Vendedor: PostIndustry
Año de construcción: usado
Ubicación: Land-drive 2 x 11 kw / 400 v / 50 hz
standard control siemens sps s7
cutting plant opening 450 mm x 560 mm
special cutter for paper main cutting unit's 19 mm - 2 teeth flat
side cutter's 19 mm - 8 teeth
reinforced hole sieve ã? 25mm
standard base height 820 mm special funnel weight approx. 1'100 kg
built in december 2014
hours of operation 415 h
painting ral 6002 leaf green
 DRIVE 2 X 11 KW / 400 V / 50 HZ STANDARD CONTROL SIEMENS SPS S7 CUTTING PLANT OPENING 450 MM X 560 MM SPECIAL CUTTER FOR PAPER MAIN CUTTING UNIT'S 19 MM - 2 TEETH FLAT SIDE CUTTER'S 19 MM - 8 TEETH REINFORCED HOLE SIEVE &ATILDE;? 25MM STANDARD BASE HEIGHT 820 MM SPECIAL FUNNEL WEIGHT APPROX. 1'100 KG BUILT IN DECEMBER 2014 HOURS OF OPERATION 415 H PAINTING RAL 6002 LEAF GREEN
Vendedor: Hunkeler Systems AG
Año de construcción: usado
Ubicación: Land-this listing is for a 2002 impact air systems rcs-3s shredder. item previously used for waste paper. 

motor: 2x 7.5kw
shafts: 2
hopper size: 55x45mm THIS LISTING IS FOR A 2002 IMPACT AIR SYSTEMS RCS-3S SHREDDER. ITEM PREVIOUSLY USED FOR WASTE PAPER. MOTOR: 2X 7.5KW SHAFTS: 2 HOPPER SIZE: 55X45MM
Vendedor: PostIndustry
Año de construcción: usado
Ubicación: Land-used wheel mobile shredder, deutz diesel, funnel opening: 2570 x 4350 mm, rotor length: 2000 mm, foldable discharge conveyor, weight: 38 tons. USED WHEEL MOBILE SHREDDER, DEUTZ DIESEL, FUNNEL OPENING: 2570 X 4350 MM, ROTOR LENGTH: 2000 MM, FOLDABLE DISCHARGE CONVEYOR, WEIGHT: 38 TONS.
Vendedor: ENDERS Produktion GmbH
Año de construcción: usado
Ubicación: Land-this listing is for a 2002 impact air systems rcs-3s shredder. item previously used for waste paper. 

motor: 2x 7.5kw
shafts: 2
hopper size: 55x45mm THIS LISTING IS FOR A 2002 IMPACT AIR SYSTEMS RCS-3S SHREDDER. ITEM PREVIOUSLY USED FOR WASTE PAPER. MOTOR: 2X 7.5KW SHAFTS: 2 HOPPER SIZE: 55X45MM
Vendedor: PostIndustry
Año de construcción: usado
Ubicación: Land-cutting width: 2x15 mm 	
year of production: 	2012
productivity: app 35-40 sheet (din a4, 70g/m²) 	
price: 	to inquiry
security level:  p5
supply: 	380 v/2,2 kw 	  	 

 
the machine is fully operational and after service.


englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939   CUTTING WIDTH: 2X15 MM YEAR OF PRODUCTION: 2012 PRODUCTIVITY: APP 35-40 SHEET (DIN A4, 70G/M²) PRICE: TO INQUIRY SECURITY LEVEL: P5 SUPPLY: 380 V/2,2 KW THE MACHINE IS FULLY OPERATIONAL AND AFTER SERVICE. ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Ubicación: Land-this listing is for a 2002 impact air systems rcs-3s shredder. item previously used for waste paper. 

motor: 2x 7.5kw
shafts: 2
hopper size: 55x45mm THIS LISTING IS FOR A 2002 IMPACT AIR SYSTEMS RCS-3S SHREDDER. ITEM PREVIOUSLY USED FOR WASTE PAPER. MOTOR: 2X 7.5KW SHAFTS: 2 HOPPER SIZE: 55X45MM
Vendedor: PostIndustry
Año de construcción: usado
Precio: 39.900 €
Ubicación: Land-  drum chipper matec economy ths 600-2/6

-catchment level / nominal height 200 mm, hacker feeder height max 300
-catchment width 600 mm
-rotor diameter 600 mm
-number of rotor blade 2
-number counter blade 2
-screen of change of perforation 50/50
-steak size nominal tmp quality 25/25 mm
-feed rollers top 2
-feed rollers down 2
-geared motor indent above 2.2 kw
-geared motor indent below 2.2 kw
-weight approx. 2000 kg

-hacker main motor 45 kw/3 x 380 v
-feeding speed nominal approx. 24 m / min.	

new machine, ready for use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden matec systems + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12      


 DRUM CHIPPER MATEC ECONOMY THS 600-2/6 -CATCHMENT LEVEL / NOMINAL HEIGHT 200 MM, HACKER FEEDER HEIGHT MAX 300 -CATCHMENT WIDTH 600 MM -ROTOR DIAMETER 600 MM -NUMBER OF ROTOR BLADE 2 -NUMBER COUNTER BLADE 2 -SCREEN OF CHANGE OF PERFORATION 50/50 -STEAK SIZE NOMINAL TMP QUALITY 25/25 MM -FEED ROLLERS TOP 2 -FEED ROLLERS DOWN 2 -GEARED MOTOR INDENT ABOVE 2.2 KW -GEARED MOTOR INDENT BELOW 2.2 KW -WEIGHT APPROX. 2000 KG -HACKER MAIN MOTOR 45 KW/3 X 380 V -FEEDING SPEED NOMINAL APPROX. 24 M / MIN. NEW MACHINE, READY FOR USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEMS + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-this listing is for a 2002 impact air systems rcs-3s shredder. item previously used for waste paper. 

motor: 2x 7.5kw
shafts: 2
hopper size: 55x45mm THIS LISTING IS FOR A 2002 IMPACT AIR SYSTEMS RCS-3S SHREDDER. ITEM PREVIOUSLY USED FOR WASTE PAPER. MOTOR: 2X 7.5KW SHAFTS: 2 HOPPER SIZE: 55X45MM
Vendedor: PostIndustry
Año de construcción: usado
Precio: 13.500 €
Ubicación: Land-thrust ground, crushers, shredders for chipboard, solid wood and the crushed pallets

a video of the current machine can be sent on request.

schuko zm900k
hopper size, approx. 800 x 1000 x 700 mm
rotor length 680 mm rotor diameter 220 mm
low-speed
engine 18, 5kw
plc control system
sieve diameter 12 mm, very stable printing, printing thickness 8 mm, not like many other hackers only 5 mm
plain shaft with 20 knives
sliding floor load-dependent control
the knives are freshly shot
timer on the control cabinet outside
dust spout 180 mm
operating instructions
ce mark
without shown black cord.
original paint, only a few points to spotted.

dimensions approx. 1900 x 1230 x 2000 mm (lxwxh). weight approx. 1450kg.

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". THRUST GROUND, CRUSHERS, SHREDDERS FOR CHIPBOARD, SOLID WOOD AND THE CRUSHED PALLETS A VIDEO OF THE CURRENT MACHINE CAN BE SENT ON REQUEST. SCHUKO ZM900K HOPPER SIZE, APPROX. 800 X 1000 X 700 MM ROTOR LENGTH 680 MM ROTOR DIAMETER 220 MM LOW-SPEED ENGINE 18, 5KW PLC CONTROL SYSTEM SIEVE DIAMETER 12 MM, VERY STABLE PRINTING, PRINTING THICKNESS 8 MM, NOT LIKE MANY OTHER HACKERS ONLY 5 MM PLAIN SHAFT WITH 20 KNIVES SLIDING FLOOR LOAD-DEPENDENT CONTROL THE KNIVES ARE FRESHLY SHOT TIMER ON THE CONTROL CABINET OUTSIDE DUST SPOUT 180 MM OPERATING INSTRUCTIONS CE MARK WITHOUT SHOWN BLACK CORD. ORIGINAL PAINT, ONLY A FEW POINTS TO SPOTTED. DIMENSIONS APPROX. 1900 X 1230 X 2000 MM (LXWXH). WEIGHT APPROX. 1450KG. PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Ubicación: Land-this listing is for a 2002 impact air systems rcs-3s shredder. item previously used for waste paper. 

motor: 2x 7.5kw
shafts: 2
hopper size: 55x45mm THIS LISTING IS FOR A 2002 IMPACT AIR SYSTEMS RCS-3S SHREDDER. ITEM PREVIOUSLY USED FOR WASTE PAPER. MOTOR: 2X 7.5KW SHAFTS: 2 HOPPER SIZE: 55X45MM
Vendedor: PostIndustry
Año de construcción: usado
Precio: 15.300 €
Ubicación: Land-thrust ground, crushers, shredders for chipboard, solid wood and the crushed pallets

a video of the current machine can be sent on request.

weima wl6
hopper size, approx. 800 x 1000 x 900 mm
rotor length 800 mm, rotor diameter 252 mm
low-speed
drive motor 22kw
plc control system
sieve diameter top 12 mm, bottom 10 mm
v-shape with 21 blades
sliding floor load-dependent control
slides with spike bar above
slider with optional fast feed
the knives are freshly shot
dust spout 200 mm
operating instructions
ce mark
without shown black cord.
original paint, only a few points to spotted.

dimensions 2200 x 1400 x 1700 mm (lxwxh). weight approx. 1600kg.

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". THRUST GROUND, CRUSHERS, SHREDDERS FOR CHIPBOARD, SOLID WOOD AND THE CRUSHED PALLETS A VIDEO OF THE CURRENT MACHINE CAN BE SENT ON REQUEST. WEIMA WL6 HOPPER SIZE, APPROX. 800 X 1000 X 900 MM ROTOR LENGTH 800 MM, ROTOR DIAMETER 252 MM LOW-SPEED DRIVE MOTOR 22KW PLC CONTROL SYSTEM SIEVE DIAMETER TOP 12 MM, BOTTOM 10 MM V-SHAPE WITH 21 BLADES SLIDING FLOOR LOAD-DEPENDENT CONTROL SLIDES WITH SPIKE BAR ABOVE SLIDER WITH OPTIONAL FAST FEED THE KNIVES ARE FRESHLY SHOT DUST SPOUT 200 MM OPERATING INSTRUCTIONS CE MARK WITHOUT SHOWN BLACK CORD. ORIGINAL PAINT, ONLY A FEW POINTS TO SPOTTED. DIMENSIONS 2200 X 1400 X 1700 MM (LXWXH). WEIGHT APPROX. 1600KG. PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Ubicación: Land-manufacturer werner doppstadt umwelttechnik
type ak-235-e
year of construction 2016
motor 160 kw
feed opening 2.940 x 1.800 mm (lxw)
in-feed volume 2,6 m³
width of drum 1.430 mm
diameter of drum 600 mm
total number of flails 16
drum rotational speed 1.150 rpm
sieve basked mesh width selectable
machine dimension 6.400 x 2.050 x 1.770 mm (lxwxh)
weight 15000 kg MANUFACTURER WERNER DOPPSTADT UMWELTTECHNIK TYPE AK-235-E YEAR OF CONSTRUCTION 2016 MOTOR 160 KW FEED OPENING 2.940 X 1.800 MM (LXW) IN-FEED VOLUME 2,6 M³ WIDTH OF DRUM 1.430 MM DIAMETER OF DRUM 600 MM TOTAL NUMBER OF FLAILS 16 DRUM ROTATIONAL SPEED 1.150 RPM SIEVE BASKED MESH WIDTH SELECTABLE MACHINE DIMENSION 6.400 X 2.050 X 1.770 MM (LXWXH) WEIGHT 15000 KG
Vendedor: RDA Recycling Machinery GmbH
Año de construcción: usado
Ubicación: Land-doppstadt shredder ak 430 year: 2000, mercedes diesel around 1 year old, chain drive, wireless.
doppstadt ak 430 shredder built in 2000, mercedes engine only one year old, on trucks, remote control system.

contact at: rerec@web.de
or mobile: 0049 16096232593. DOPPSTADT SHREDDER AK 430 YEAR: 2000, MERCEDES DIESEL AROUND 1 YEAR OLD, CHAIN DRIVE, WIRELESS. DOPPSTADT AK 430 SHREDDER BUILT IN 2000, MERCEDES ENGINE ONLY ONE YEAR OLD, ON TRUCKS, REMOTE CONTROL SYSTEM. CONTACT AT: REREC@WEB.DE OR MOBILE: 0049 16096232593.
Vendedor: Reinhard
Año de construcción: usado
Ubicación: Land-cutting width: 3,8 x 50  mm 	
year of production: 1995
supply: 400 v/ 4 kw 	
price: 	to inquiry
security leve: 	din 66399 o-2/p-3/t-3/e-2/

the machine is fully operational and after service. 

englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939
  CUTTING WIDTH: 3,8 X 50 MM YEAR OF PRODUCTION: 1995 SUPPLY: 400 V/ 4 KW PRICE: TO INQUIRY SECURITY LEVE: DIN 66399 O-2/P-3/T-3/E-2/ THE MACHINE IS FULLY OPERATIONAL AND AFTER SERVICE. ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Ubicación: Land-the model of thor-90250 shredder mainly shred truck tire,buss tire,car tire,rubble, concrete, asphalt, natural stones and big etc.

it has got double rotors which powered with double kawasaki pumps, sauer hydromotors, planet type big gearboxes and 250kw siemens electrical engine.

if you are interested in the thor-90250 shredder please contact with us.
 THE MODEL OF THOR-90250 SHREDDER MAINLY SHRED TRUCK TIRE,BUSS TIRE,CAR TIRE,RUBBLE, CONCRETE, ASPHALT, NATURAL STONES AND BIG ETC. IT HAS GOT DOUBLE ROTORS WHICH POWERED WITH DOUBLE KAWASAKI PUMPS, SAUER HYDROMOTORS, PLANET TYPE BIG GEARBOXES AND 250KW SIEMENS ELECTRICAL ENGINE. IF YOU ARE INTERESTED IN THE THOR-90250 SHREDDER PLEASE CONTACT WITH US.
Vendedor: SE SHREDDERS
Año de construcción: usado
Precio: 470.000 €
Ubicación: Land-description
brand	regutec
model	reguplant blueline 9000
id	2000
status	active
price	470.000 € + vat
year of manufacture	2000
fuel	altele
power	135 kw
location	budapesta, ungaria

rubber recycling line regutec reguplant blueline 9000.

components and line stages:

1. primary crushing
 sbh 1600/950 double-shaft crusher
2. secondary crushing
regumatic m2000 r2 single-shaft crusher
3. granulation
4. classification equipment
5. air suction
6. utilities

double shaft shredder ca 4 tons tyres/hr

dimensions of the cutting area: 1600 × 950 mm
knife width: 70 mm
revolutions of the cylinders: 0-20 rev/min; continuously adjustable
drive: 2× hydraulic motor compact hagglunds
input of the main hydraulic unit: 135 kw
number of knives: 13 + 13 pcs
cylinder power output 90+45 kw
capacity of the machine: 5000 kg/h
input of the swivel hydraulic unit: 3 kw
weight of the machine: 10 t
nominal moment: 42 975 nm
dimensions (w × l × h) 3000 × 5000 × 3000 mm


single shaft shredder ca 3 tons/hr with 20 mm output

dimensions of the input opening 2030 x 1650 mm
amount of material in the machine ca. 4 m3
working width ca. 2000 mm
revolutions of the rotor 80 rev/min
number of the knives 104 pcs
bottom set of counterknives 3 pcs
upper wiping comb 3 pcs
input of the motors 2x 90 kw
sieve (set of 3 pieces) Ø 20 mm
capacity of the machine ca 3000 kg/hr
heavy-duty rotor
rotor cooling
distribution box, wiring
safety coupling
weight ca. 13 000 kg
voltage 400 v, 50 hz.

exworks. price is negotiable. 

contact
tel.: +40-359/175.575
fax: +40-259/426.248
mobil: +40-743/177.040 ; +40-740/221.698

technical inspection can be organized at least 24 hrs before the due date

we speak english. wir sprechen deutsch. (+40-740/221.698 )
hablamos español. beszélünk magyarul. (+40-743/177.040 )

irrtum, anderungen und zwischenverkauf vorbehalten /
subject to errors, changes and prior sale /
ne rezervam dreptul la greseli, modificari si vanzare prealabila. DESCRIPTION BRAND REGUTEC MODEL REGUPLANT BLUELINE 9000 ID 2000 STATUS ACTIVE PRICE 470.000 € + VAT YEAR OF MANUFACTURE 2000 FUEL ALTELE POWER 135 KW LOCATION BUDAPESTA, UNGARIA RUBBER RECYCLING LINE REGUTEC REGUPLANT BLUELINE 9000. COMPONENTS AND LINE STAGES: 1. PRIMARY CRUSHING SBH 1600/950 DOUBLE-SHAFT CRUSHER 2. SECONDARY CRUSHING REGUMATIC M2000 R2 SINGLE-SHAFT CRUSHER 3. GRANULATION 4. CLASSIFICATION EQUIPMENT 5. AIR SUCTION 6. UTILITIES DOUBLE SHAFT SHREDDER CA 4 TONS TYRES/HR DIMENSIONS OF THE CUTTING AREA: 1600 × 950 MM KNIFE WIDTH: 70 MM REVOLUTIONS OF THE CYLINDERS: 0-20 REV/MIN; CONTINUOUSLY ADJUSTABLE DRIVE: 2× HYDRAULIC MOTOR COMPACT HAGGLUNDS INPUT OF THE MAIN HYDRAULIC UNIT: 135 KW NUMBER OF KNIVES: 13 + 13 PCS CYLINDER POWER OUTPUT 90+45 KW CAPACITY OF THE MACHINE: 5000 KG/H INPUT OF THE SWIVEL HYDRAULIC UNIT: 3 KW WEIGHT OF THE MACHINE: 10 T NOMINAL MOMENT: 42 975 NM DIMENSIONS (W × L × H) 3000 × 5000 × 3000 MM SINGLE SHAFT SHREDDER CA 3 TONS/HR WITH 20 MM OUTPUT DIMENSIONS OF THE INPUT OPENING 2030 X 1650 MM AMOUNT OF MATERIAL IN THE MACHINE CA. 4 M3 WORKING WIDTH CA. 2000 MM REVOLUTIONS OF THE ROTOR 80 REV/MIN NUMBER OF THE KNIVES 104 PCS BOTTOM SET OF COUNTERKNIVES 3 PCS UPPER WIPING COMB 3 PCS INPUT OF THE MOTORS 2X 90 KW SIEVE (SET OF 3 PIECES) Ø 20 MM CAPACITY OF THE MACHINE CA 3000 KG/HR HEAVY-DUTY ROTOR ROTOR COOLING DISTRIBUTION BOX, WIRING SAFETY COUPLING WEIGHT CA. 13 000 KG VOLTAGE 400 V, 50 HZ. EXWORKS. PRICE IS NEGOTIABLE. CONTACT TEL.: +40-359/175.575 FAX: +40-259/426.248 MOBIL: +40-743/177.040 ; +40-740/221.698 TECHNICAL INSPECTION CAN BE ORGANIZED AT LEAST 24 HRS BEFORE THE DUE DATE WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. (+40-740/221.698 ) HABLAMOS ESPAñOL. BESZéLüNK MAGYARUL. (+40-743/177.040 ) IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Ubicación: Land-residual wood zer tensioner ll 600

engine power: 11 or 15 kw
rotor speed: 570 rpm.
rotor diameter: 280 mm
cutting tools: 34 pcs.
cutting work width: 600 mm
capacity: 0.6-1.7 m â³/h
dust nozzle: 200 x 200 mm
approximate weight: 920 kg
dimensions: l 1.150 x w 1,130 x h 1,920 mm

hack good size - siebabhã¤ngig:
standard sieves ã?: 17.5 / 20 / 22 / 25 mm
special sieves ã?: 12 / 15 / 30 mm RESIDUAL WOOD ZER TENSIONER LL 600 ENGINE POWER: 11 OR 15 KW ROTOR SPEED: 570 RPM. ROTOR DIAMETER: 280 MM CUTTING TOOLS: 34 PCS. CUTTING WORK WIDTH: 600 MM CAPACITY: 0.6-1.7 M &ACIRC;&SUP3;/H DUST NOZZLE: 200 X 200 MM APPROXIMATE WEIGHT: 920 KG DIMENSIONS: L 1.150 X W 1,130 X H 1,920 MM HACK GOOD SIZE - SIEBABH&ATILDE;&CURREN;NGIG: STANDARD SIEVES &ATILDE;?: 17.5 / 20 / 22 / 25 MM SPECIAL SIEVES &ATILDE;?: 12 / 15 / 30 MM
Vendedor: Wilhelm Freudlinger Werkzeuge und Maschinen
Año de construcción: usado
Ubicación: Land-residual wood zer tensioner ll 800 hsdn

engine power: 18.5 22.5 kw
power hydraulics: 1.75 kw
hydraulkikzylinder: 700 mm stroke
hopper capacity: 1,0 mâ³
vent: 800 x 1.260 mm
number of tools: 32 pcs.
rotor speed: 120 rpm.
dimensions: l b 2,650 x 1.400 x h 1,760 mm
approximate weight: 1,800 kg

hack good size - siebabhã¤ngig:
standard sieves ã?: 17.5 / 20 / 22 / 25 mm
special sieves ã?: 12 / 15 / 30 mm RESIDUAL WOOD ZER TENSIONER LL 800 HSDN ENGINE POWER: 18.5 22.5 KW POWER HYDRAULICS: 1.75 KW HYDRAULKIKZYLINDER: 700 MM STROKE HOPPER CAPACITY: 1,0 M&ACIRC;&SUP3; VENT: 800 X 1.260 MM NUMBER OF TOOLS: 32 PCS. ROTOR SPEED: 120 RPM. DIMENSIONS: L B 2,650 X 1.400 X H 1,760 MM APPROXIMATE WEIGHT: 1,800 KG HACK GOOD SIZE - SIEBABH&ATILDE;&CURREN;NGIG: STANDARD SIEVES &ATILDE;?: 17.5 / 20 / 22 / 25 MM SPECIAL SIEVES &ATILDE;?: 12 / 15 / 30 MM
Vendedor: Wilhelm Freudlinger Werkzeuge und Maschinen
Año de construcción: usado
Ubicación: Land-cutting width: 6 x 40-53 mm 	
year of production: 	2007
supply:	400 v / 9,2 kw 
security leve: din 66399 	
p4 din 66399-1
f2 din 66399-1 pkt. 5.2

brand new cutting blades

englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939 CUTTING WIDTH: 6 X 40-53 MM YEAR OF PRODUCTION: 2007 SUPPLY: 400 V / 9,2 KW SECURITY LEVE: DIN 66399 P4 DIN 66399-1 F2 DIN 66399-1 PKT. 5.2 BRAND NEW CUTTING BLADES ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Ubicación: Land-cutting width: 3.8 mm 	
year of production: 1999
productivity: 	app 100 sheet (din a4, 70g/m²) 
cutting speed: 	354mm/s 
security leve: din 66399 	p2
supply: 400 v / 4 kw 	  	 

 
the price includes paint renovation and all repairs necessary to deliver a fully functioning machine. 

englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939  CUTTING WIDTH: 3.8 MM YEAR OF PRODUCTION: 1999 PRODUCTIVITY: APP 100 SHEET (DIN A4, 70G/M²) CUTTING SPEED: 354MM/S SECURITY LEVE: DIN 66399 P2 SUPPLY: 400 V / 4 KW THE PRICE INCLUDES PAINT RENOVATION AND ALL REPAIRS NECESSARY TO DELIVER A FULLY FUNCTIONING MACHINE. ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Ubicación: Land-mutton 750, bj. 2003, 2012 new 350hp cat diesel for 3.900bh, total mileage of the machine ca 6.900bh, new belt on the discharge conveyor, funk, hydr. wheel axle, after breaking bar.
shredder mutton 750 d built in 2003, in 2012 a new cat diesel engine, with this 2012 is engine hey machine 3.900 working hours running, the total working hours from the machine would be 6,900 working hours, new conveyour, remote control hydr. wheel axle, breaker bar.
how to contact with under: 0049 160 96232593
or e-mail at: rerec@web.de
 MUTTON 750, BJ. 2003, 2012 NEW 350HP CAT DIESEL FOR 3.900BH, TOTAL MILEAGE OF THE MACHINE CA 6.900BH, NEW BELT ON THE DISCHARGE CONVEYOR, FUNK, HYDR. WHEEL AXLE, AFTER BREAKING BAR. SHREDDER MUTTON 750 D BUILT IN 2003, IN 2012 A NEW CAT DIESEL ENGINE, WITH THIS 2012 IS ENGINE HEY MACHINE 3.900 WORKING HOURS RUNNING, THE TOTAL WORKING HOURS FROM THE MACHINE WOULD BE 6,900 WORKING HOURS, NEW CONVEYOUR, REMOTE CONTROL HYDR. WHEEL AXLE, BREAKER BAR. HOW TO CONTACT WITH UNDER: 0049 160 96232593 OR E-MAIL AT: REREC@WEB.DE
Vendedor: Reinhard
Año de construcción: usado
Ubicación: Land-washing line constructor : viplat
for pe pp
average output 800 kg/h
optional : shredder or grinder, metal detector, belt
stainless steel loading hopper
stainless steel washing and float-sink separating  bath constructed with 3 mm. thick foil in aisi 304, with gearbox, motorized moving rolls with paddles + stainless steel extraction roll  and auger for floating materials + stainless steel bottom extraction auger for sunk material +  motorized with 62 pneumatic valve for mud + manual valve for water outlet
22 kw horizontal centrifuge :shovels, mesh, inlet, decagon, outlet mouth and covers made in  stainless steel , the rest is made in carbon steel  with air sprays  for automatic cleaning of the mesh with a transport system composed by  coupling  mouth in stainless steel, 5,5 kw  fan,  15 meters of 160 mm.diam. in galvanized sheet of 1.2 mm. + n.15  x 160 mm diam. clamps,  2 curves of 160 mm.diam. in galvanized sheet of 2 mm. + 1 curve of 160 mm diam. at 45 ° galvanized sheet of 2 mm.
950 mm cyclone  with tower coupled to centrifuge galvanized sheet of 2 mm.
piping 160 mm. diam.
horizontal centrifuge 22 kw motor :shovels, mesh, inlet, decagon, outlet mouth and covers made in  stainless steel , the rest is made in carbon steel  with air sprays  for automatic cleaning of the mesh with a transport system composed by  coupling  mouth in stainless steel, 5,5 kw  fan,  15 meters of 160 mm.diam. in galvanized sheet of 1.2 mm. + n.10x  160 mm diam. clamps,  2 curves of 160 mm.diam. in galvanized sheet of 2 mm. + 1 curve of 160 mm diam. at 45 ° galvanized sheet of 2 mm.
piping 160 mm. diam.
electric cabinet  for management of the line
storage silo (optional)
the line can be completed with agglomerator + extruder (see options on our website)   WASHING LINE CONSTRUCTOR : VIPLAT FOR PE PP AVERAGE OUTPUT 800 KG/H OPTIONAL : SHREDDER OR GRINDER, METAL DETECTOR, BELT STAINLESS STEEL LOADING HOPPER STAINLESS STEEL WASHING AND FLOAT-SINK SEPARATING  BATH CONSTRUCTED WITH 3 MM. THICK FOIL IN AISI 304, WITH GEARBOX, MOTORIZED MOVING ROLLS WITH PADDLES + STAINLESS STEEL EXTRACTION ROLL  AND AUGER FOR FLOATING MATERIALS + STAINLESS STEEL BOTTOM EXTRACTION AUGER FOR SUNK MATERIAL +  MOTORIZED WITH 62 PNEUMATIC VALVE FOR MUD + MANUAL VALVE FOR WATER OUTLET 22 KW HORIZONTAL CENTRIFUGE :SHOVELS, MESH, INLET, DECAGON, OUTLET MOUTH AND COVERS MADE IN  STAINLESS STEEL , THE REST IS MADE IN CARBON STEEL  WITH AIR SPRAYS  FOR AUTOMATIC CLEANING OF THE MESH WITH A TRANSPORT SYSTEM COMPOSED BY  COUPLING  MOUTH IN STAINLESS STEEL, 5,5 KW  FAN,  15 METERS OF 160 MM.DIAM. IN GALVANIZED SHEET OF 1.2 MM. + N.15  X 160 MM DIAM. CLAMPS,  2 CURVES OF 160 MM.DIAM. IN GALVANIZED SHEET OF 2 MM. + 1 CURVE OF 160 MM DIAM. AT 45 ° GALVANIZED SHEET OF 2 MM. 950 MM CYCLONE  WITH TOWER COUPLED TO CENTRIFUGE GALVANIZED SHEET OF 2 MM. PIPING 160 MM. DIAM. HORIZONTAL CENTRIFUGE 22 KW MOTOR :SHOVELS, MESH, INLET, DECAGON, OUTLET MOUTH AND COVERS MADE IN  STAINLESS STEEL , THE REST IS MADE IN CARBON STEEL  WITH AIR SPRAYS  FOR AUTOMATIC CLEANING OF THE MESH WITH A TRANSPORT SYSTEM COMPOSED BY  COUPLING  MOUTH IN STAINLESS STEEL, 5,5 KW  FAN,  15 METERS OF 160 MM.DIAM. IN GALVANIZED SHEET OF 1.2 MM. + N.10X  160 MM DIAM. CLAMPS,  2 CURVES OF 160 MM.DIAM. IN GALVANIZED SHEET OF 2 MM. + 1 CURVE OF 160 MM DIAM. AT 45 ° GALVANIZED SHEET OF 2 MM. PIPING 160 MM. DIAM. ELECTRIC CABINET  FOR MANAGEMENT OF THE LINE STORAGE SILO (OPTIONAL) THE LINE CAN BE COMPLETED WITH AGGLOMERATOR + EXTRUDER (SEE OPTIONS ON OUR WEBSITE)
Vendedor: GERMANPLAST SRL
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more SE types: