1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-
maximum sheet thickness: 5 mm
rpm: 1500 / 3000 rpm
brush diameter: 250 mm
total power consumption: 2.4 / 3.0 kw / 400 v
machine weight: 300 kg

equipment / accessories:

machine fixators

the machine is suitable for the deburring of steel, stainless steel plate, as well as ne - metals.

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
anyone can test the machine before purchasing power.
 MAXIMUM SHEET THICKNESS: 5 MM RPM: 1500 / 3000 RPM BRUSH DIAMETER: 250 MM TOTAL POWER CONSUMPTION: 2.4 / 3.0 KW / 400 V MACHINE WEIGHT: 300 KG EQUIPMENT / ACCESSORIES: MACHINE FIXATORS THE MACHINE IS SUITABLE FOR THE DEBURRING OF STEEL, STAINLESS STEEL PLATE, AS WELL AS NE - METALS. ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. ANYONE CAN TEST THE MACHINE BEFORE PURCHASING POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-manufacturer hsm<br/>type vk 75 / 1600<br/>year of construction 1998<br/>hours of operation 54,412 hours<br/>press power main press 75 tons<br/>specific press capacity 99,2 n/cm²<br/>feed channel 720 x 1,600 mm (w x l)<br/>capacity per cycle time 1,21 m³<br/>theoretic cycle time 14,4 sec.<br/>theoretic  throughput rate 339 m³/h<br/>bale size 720 x 1,050 x 600 up to 1,200 mm (w x h x l)<br/>driving motor 55 kw, 500v, 50 hz, 79 a<br/>connected load 64 kw, 500 v, 98 a<br/>tying system 5-fold horizontal, fully automatic<br/>throughput rate at a<br/>bulk weight of 20 kg/cbm up to 6,8 tons/h<br/>bulk weight of 50 kg/cbm up to 16,9 tons/h<br/>bale weight up to 620 kg/bale, depends on material<br/>volume hydraulic oil tank 1,250 l<br/>sps controller (manuf., type) siemens simatic s7 300<br/>operating panel (manuf., type)  siemens simatic multi panel<br/>transport dimensions only baler 6,180 x 2,250 x 3,260 mm (l x w x h)<br/>machine weight baler approx. 15,5 tons<br/>condition of the baler:<br/>the machine is in good condition, has been regularly serviced and is ready for immediate use.<br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER HSM
TYPE VK 75 / 1600
YEAR OF CONSTRUCTION 1998
HOURS OF OPERATION 54,412 HOURS
PRESS POWER MAIN PRESS 75 TONS
SPECIFIC PRESS CAPACITY 99,2 N/CM²
FEED CHANNEL 720 X 1,600 MM (W X L)
CAPACITY PER CYCLE TIME 1,21 M³
THEORETIC CYCLE TIME 14,4 SEC.
THEORETIC THROUGHPUT RATE 339 M³/H
BALE SIZE 720 X 1,050 X 600 UP TO 1,200 MM (W X H X L)
DRIVING MOTOR 55 KW, 500V, 50 HZ, 79 A
CONNECTED LOAD 64 KW, 500 V, 98 A
TYING SYSTEM 5-FOLD HORIZONTAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 20 KG/CBM UP TO 6,8 TONS/H
BULK WEIGHT OF 50 KG/CBM UP TO 16,9 TONS/H
BALE WEIGHT UP TO 620 KG/BALE, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 1,250 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS SIMATIC S7 300
OPERATING PANEL (MANUF., TYPE) SIEMENS SIMATIC MULTI PANEL
TRANSPORT DIMENSIONS ONLY BALER 6,180 X 2,250 X 3,260 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 15,5 TONS
CONDITION OF THE BALER:
THE MACHINE IS IN GOOD CONDITION, HAS BEEN REGULARLY SERVICED AND IS READY FOR IMMEDIATE USE.
COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 5.400 €
Ubicación: Land--40 [mm] roll shaft diameter,
-3 driving rolls,
-standard roll Ø165 [mm],
-70 x 1.5 [mm] round tube capacity,
-2? gas inches (3.2 mm) capacity,
-50 x 50 x 6 [mm] angle iron capacity,
-bending speeds 20% faster than competitive machines,
-forged roll shafts precision ground and fitted for maximum performance and minimal deflection,
-heavy duty structure and rigid components for high section modulus ratings,
-reinforced engineered mainframe design proven to outperform competitive models,
-patented by ercolina simultaneous downfeed and roll movement to minimize deformation,
-programmable touchpad controls with digital center roll positioning display,
-remote pendent with low voltage controls and foot pedal switch.
-power supply: 380-440 [v],
-motor: 1.85 [kw].

-dimensions: 650 x 102 x 148 [mm],
-weight: 300 [kg] approx.

are included:

-universal die / roll set,
-dies for round tubing bending : Ø 1 -40 [MM] ROLL SHAFT DIAMETER, -3 DRIVING ROLLS, -STANDARD ROLL Ø165 [MM], -70 X 1.5 [MM] ROUND TUBE CAPACITY, -2? GAS INCHES (3.2 MM) CAPACITY, -50 X 50 X 6 [MM] ANGLE IRON CAPACITY, -BENDING SPEEDS 20% FASTER THAN COMPETITIVE MACHINES, -FORGED ROLL SHAFTS PRECISION GROUND AND FITTED FOR MAXIMUM PERFORMANCE AND MINIMAL DEFLECTION, -HEAVY DUTY STRUCTURE AND RIGID COMPONENTS FOR HIGH SECTION MODULUS RATINGS, -REINFORCED ENGINEERED MAINFRAME DESIGN PROVEN TO OUTPERFORM COMPETITIVE MODELS, -PATENTED BY ERCOLINA SIMULTANEOUS DOWNFEED AND ROLL MOVEMENT TO MINIMIZE DEFORMATION, -PROGRAMMABLE TOUCHPAD CONTROLS WITH DIGITAL CENTER ROLL POSITIONING DISPLAY, -REMOTE PENDENT WITH LOW VOLTAGE CONTROLS AND FOOT PEDAL SWITCH. -POWER SUPPLY: 380-440 [V], -MOTOR: 1.85 [KW]. -DIMENSIONS: 650 X 102 X 148 [MM], -WEIGHT: 300 [KG] APPROX. ARE INCLUDED: -UNIVERSAL DIE / ROLL SET, -DIES FOR ROUND TUBING BENDING : Ø 1"1/4 (42.4 MM) + 1/2" (21.3 MM), -1 ERCOLINA SERVICE KEY, -1 SET OF PRECISION SPACERS FOR THE DIES. MACHINE IN PERFECT CONDITION, VISIBLE UNDER POWER FOR INSPECTION AND TRIAL. PRICE VAT EXCLUDED, EX WORKS LOADING ON TRUCK INCLUDED. SHIPPING IN FRANCE AND EUROPE IS POSSIBLE. MORE PICTURES AND DETAILS ON REQUEST.
Vendedor: SARL Kraffter
Año de construcción: usado
Precio: 29.500 €
Ubicación: Land-manufacturer hsm<br/>type vk 4012<br/>year of construction 2003<br/>hours of operation 18,158 hours<br/>quantity of pressed bales 71,479 bales<br/>press power main press 45 tons<br/>specific press capacity 69,4 n/cm²<br/>feed channel 820 x 1,250 mm (w x l)<br/>capacity per cycle time 0,81 m³<br/>theoretic cycle time 17 sec.<br/>theoretic  throughput rate 174 m³/h<br/>bale size 900 x 720 x 600 up to 1,200 mm (w x h x l)<br/>driving motor 15 kw<br/>connected load 18 kw, 500 v, 50 hz, 30 a<br/>tying system 3-fold horizontal, fully automatic<br/>throughput rate at a<br/>bulk weight of 20 kg/cbm up to 3,5 tons/h<br/>bulk weight of 50 kg/cbm up to 8,7 tons/h<br/>bale weight up to 400 kg/bale, depends on material<br/>volume hydraulic oil tank 300 l<br/>sps controller (manuf., type) siemens simatic s7 300<br/>operating panel (manuf., type)  siemens simatic hmi<br/>transport dimensions only baler 6,180 x 2,250 x 2,350 mm (l x w x h)<br/>machine weight baler approx. 7 tons<br/>condition of the baler:<br/>the machine is in good condition, has been regularly serviced and is ready for immediate use.<br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER HSM
TYPE VK 4012
YEAR OF CONSTRUCTION 2003
HOURS OF OPERATION 18,158 HOURS
QUANTITY OF PRESSED BALES 71,479 BALES
PRESS POWER MAIN PRESS 45 TONS
SPECIFIC PRESS CAPACITY 69,4 N/CM²
FEED CHANNEL 820 X 1,250 MM (W X L)
CAPACITY PER CYCLE TIME 0,81 M³
THEORETIC CYCLE TIME 17 SEC.
THEORETIC THROUGHPUT RATE 174 M³/H
BALE SIZE 900 X 720 X 600 UP TO 1,200 MM (W X H X L)
DRIVING MOTOR 15 KW
CONNECTED LOAD 18 KW, 500 V, 50 HZ, 30 A
TYING SYSTEM 3-FOLD HORIZONTAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 20 KG/CBM UP TO 3,5 TONS/H
BULK WEIGHT OF 50 KG/CBM UP TO 8,7 TONS/H
BALE WEIGHT UP TO 400 KG/BALE, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 300 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS SIMATIC S7 300
OPERATING PANEL (MANUF., TYPE) SIEMENS SIMATIC HMI
TRANSPORT DIMENSIONS ONLY BALER 6,180 X 2,250 X 2,350 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 7 TONS
CONDITION OF THE BALER:
THE MACHINE IS IN GOOD CONDITION, HAS BEEN REGULARLY SERVICED AND IS READY FOR IMMEDIATE USE.
COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 48.600 €
Ubicación: Land-whole body 64 slice ct scanner, professionally deinstalled
system sn s0009, gantry sn ka17719001 
software revision v1.80 (service pack 1.11) with dicom q/r, mwm
mcs7070hp tube replaced august 2017 (currently <130,000 scan seconds)
72kw generator type ct-wg-70 (dom 2015) WHOLE BODY 64 SLICE CT SCANNER, PROFESSIONALLY DEINSTALLED SYSTEM SN S0009, GANTRY SN KA17719001 SOFTWARE REVISION V1.80 (SERVICE PACK 1.11) WITH DICOM Q/R, MWM MCS7070HP TUBE REPLACED AUGUST 2017 (CURRENTLY <130,000 SCAN SECONDS) 72KW GENERATOR TYPE CT-WG-70 (DOM 2015)
Vendedor: Block Imaging International
Año de construcción: usado
Ubicación: Land-manufacturer bollegraaf<br/>type hbc 100<br/>year of construction 1991, 2017 overhauled<br/>hours of operation 40,586 hours<br/>press power main press 100 tons<br/>press power of pre-press 50 tons<br/>feed channel 1,600 x 1,100 mm (l x w)<br/>capacity per cycle time 3,15 m³<br/>theoretic cycle time 22 sec.<br/>bale size 750 x 1,100 mm, length variable<br/>driving motor 2 x 30 kw<br/>tying system 5 fold vertical, fully automatic<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm up to 12 tons/h<br/>bulk weight of 50 kg/cbm up to 25 tons/h<br/>bulk weight of 100 kg/cbm up to 47 tons/h<br/>bale weight 550 up to 850 kg, depends on material<br/>volume hydraulic oil tank 1,200 l<br/>sps controller (manuf., type)  telemecanique tsx micro<br/>operating panel (manuf., type)  schneider magelis touch panel<br/>transport dimensions only baler 11,750 x 2,250 x 3,150 mm (l x w x h)<br/>machine weight baler approx. 30 tons<br/><br/>comments:<br/>the machine has been overhauled. the following work was carried out or parts were replaced.<br/>this press has been overhauled. following steps of repair and overhauling have been taken:<br/><br/>elder sps controls including enter and exit component assemblies were replaced by new controls of telemécanique tsx micro and the input commands in    the touch panel translated into russian.<br/>manual service push buttons were replaced by schneider tft touch panel 7,5? of type magelis.<br/>upper and lower light barriers including repeater (telco) have been renewed.<br/>the electric connection at hydraulic manifold is new, with partially renewed machine control cables and removal of needless connection.<br/>hydraulic oil tank has been emptied, cleaned and all filters were renewed.<br/>rubber gear for diminishing pressure between pumps and electric motors were renewed.<br/>pipes between high pressure part of the pump and hydraulic manifold have been renewed.<br/>cartridge cap on manifold has been sealed up newly.<br/>rubber buffers of pre-press flap are new.<br/>filling level indicator at tank has been renewed.<br/>measurement connections at hydraulic tank were altered.<br/>all flanges of hydraulic pipes have been sealed up newly.<br/>main cylinder, clam shell cylinder, needle cylinder and cylinder for wire core have all been sealed up newly.<br/>plunger of main cylinder, of clam shell cylinder and of needle cylinder have been ground and chrome-plated newly.<br/>all rollers and guide pulleys of press ram have been cleaned and loosened, the front rollers were renewed.<br/>wire guidance was cleaned and loosened, the back wire guidance rollers and wire core with pinhead rollers have been renewed.<br/>pinheads including blades have been reworked.<br/>hinges at press channel, on lateral parts and cap have been renewed.<br/>all hydraulic hoses of clam shell cylinders have been renewed.<br/><br/>inspections in russia, near moscow are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER BOLLEGRAAF
TYPE HBC 100
YEAR OF CONSTRUCTION 1991, 2017 OVERHAULED
HOURS OF OPERATION 40,586 HOURS
PRESS POWER MAIN PRESS 100 TONS
PRESS POWER OF PRE-PRESS 50 TONS
FEED CHANNEL 1,600 X 1,100 MM (L X W)
CAPACITY PER CYCLE TIME 3,15 M³
THEORETIC CYCLE TIME 22 SEC.
BALE SIZE 750 X 1,100 MM, LENGTH VARIABLE
DRIVING MOTOR 2 X 30 KW
TYING SYSTEM 5 FOLD VERTICAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM UP TO 12 TONS/H
BULK WEIGHT OF 50 KG/CBM UP TO 25 TONS/H
BULK WEIGHT OF 100 KG/CBM UP TO 47 TONS/H
BALE WEIGHT 550 UP TO 850 KG, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 1,200 L
SPS CONTROLLER (MANUF., TYPE) TELEMECANIQUE TSX MICRO
OPERATING PANEL (MANUF., TYPE) SCHNEIDER MAGELIS TOUCH PANEL
TRANSPORT DIMENSIONS ONLY BALER 11,750 X 2,250 X 3,150 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 30 TONS

COMMENTS:
THE MACHINE HAS BEEN OVERHAULED. THE FOLLOWING WORK WAS CARRIED OUT OR PARTS WERE REPLACED.
THIS PRESS HAS BEEN OVERHAULED. FOLLOWING STEPS OF REPAIR AND OVERHAULING HAVE BEEN TAKEN:

ELDER SPS CONTROLS INCLUDING ENTER AND EXIT COMPONENT ASSEMBLIES WERE REPLACED BY NEW CONTROLS OF TELEMéCANIQUE TSX MICRO AND THE INPUT COMMANDS IN THE TOUCH PANEL TRANSLATED INTO RUSSIAN.
MANUAL SERVICE PUSH BUTTONS WERE REPLACED BY SCHNEIDER TFT TOUCH PANEL 7,5? OF TYPE MAGELIS.
UPPER AND LOWER LIGHT BARRIERS INCLUDING REPEATER (TELCO) HAVE BEEN RENEWED.
THE ELECTRIC CONNECTION AT HYDRAULIC MANIFOLD IS NEW, WITH PARTIALLY RENEWED MACHINE CONTROL CABLES AND REMOVAL OF NEEDLESS CONNECTION.
HYDRAULIC OIL TANK HAS BEEN EMPTIED, CLEANED AND ALL FILTERS WERE RENEWED.
RUBBER GEAR FOR DIMINISHING PRESSURE BETWEEN PUMPS AND ELECTRIC MOTORS WERE RENEWED.
PIPES BETWEEN HIGH PRESSURE PART OF THE PUMP AND HYDRAULIC MANIFOLD HAVE BEEN RENEWED.
CARTRIDGE CAP ON MANIFOLD HAS BEEN SEALED UP NEWLY.
RUBBER BUFFERS OF PRE-PRESS FLAP ARE NEW.
FILLING LEVEL INDICATOR AT TANK HAS BEEN RENEWED.
MEASUREMENT CONNECTIONS AT HYDRAULIC TANK WERE ALTERED.
ALL FLANGES OF HYDRAULIC PIPES HAVE BEEN SEALED UP NEWLY.
MAIN CYLINDER, CLAM SHELL CYLINDER, NEEDLE CYLINDER AND CYLINDER FOR WIRE CORE HAVE ALL BEEN SEALED UP NEWLY.
PLUNGER OF MAIN CYLINDER, OF CLAM SHELL CYLINDER AND OF NEEDLE CYLINDER HAVE BEEN GROUND AND CHROME-PLATED NEWLY.
ALL ROLLERS AND GUIDE PULLEYS OF PRESS RAM HAVE BEEN CLEANED AND LOOSENED, THE FRONT ROLLERS WERE RENEWED.
WIRE GUIDANCE WAS CLEANED AND LOOSENED, THE BACK WIRE GUIDANCE ROLLERS AND WIRE CORE WITH PINHEAD ROLLERS HAVE BEEN RENEWED.
PINHEADS INCLUDING BLADES HAVE BEEN REWORKED.
HINGES AT PRESS CHANNEL, ON LATERAL PARTS AND CAP HAVE BEEN RENEWED.
ALL HYDRAULIC HOSES OF CLAM SHELL CYLINDERS HAVE BEEN RENEWED.

INSPECTIONS IN RUSSIA, NEAR MOSCOW ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-technical data:

work area: 2,500 x 1,250 x 115 mm
control: siemens sinumerik 840 d
laser power: 3,200 watts
maximum sheet thickness mild steel: 20 mm
maximum sheet thickness stainless steel: 12 mm
maximum sheet thickness aluminium: 8 mm standard equipment:

-closed machine frame with integrated laser unit
-automatic pallet changer
-tft color display
-position laser diode
-spraying device
-motion unit for high-precision machining
-additional highly dynamic axis yp
-drives with maintenance-free ac servo motors
-closed beam delivery
-conveyor for small parts and waste
-nitroline
-flyline
-infeed end detection

trumpf laser:

-co2 laser truflow 4000
-high-frequency excitation
-maintenance-friendly turbo centrifugal blower
-gas mixer (integrated)
-laser power control
-logbook function laser

cutting head:

-laserschneidopf with 5 "lens
-laserschneidopf with 7.5 "lens
-universal quick exchange device
-controlline

control:

-control siemens sinumerik 840 d
-automatic switch-off
-contourline
-sprintline
-teleservice
-microweld
-rj45 network connector
-3.5 "floppy disk drive
-network connection via tele-diagnosis

security:

-ce marking
-light barrier
-multi-chamber exhaust system
-compact collector
-shop floor programming

(errors and omissions in the technical data, information and prices and subject to prior sale!) 
 TECHNICAL DATA: WORK AREA: 2,500 X 1,250 X 115 MM CONTROL: SIEMENS SINUMERIK 840 D LASER POWER: 3,200 WATTS MAXIMUM SHEET THICKNESS MILD STEEL: 20 MM MAXIMUM SHEET THICKNESS STAINLESS STEEL: 12 MM MAXIMUM SHEET THICKNESS ALUMINIUM: 8 MM STANDARD EQUIPMENT: -CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT -AUTOMATIC PALLET CHANGER -TFT COLOR DISPLAY -POSITION LASER DIODE -SPRAYING DEVICE -MOTION UNIT FOR HIGH-PRECISION MACHINING -ADDITIONAL HIGHLY DYNAMIC AXIS YP -DRIVES WITH MAINTENANCE-FREE AC SERVO MOTORS -CLOSED BEAM DELIVERY -CONVEYOR FOR SMALL PARTS AND WASTE -NITROLINE -FLYLINE -INFEED END DETECTION TRUMPF LASER: -CO2 LASER TRUFLOW 4000 -HIGH-FREQUENCY EXCITATION -MAINTENANCE-FRIENDLY TURBO CENTRIFUGAL BLOWER -GAS MIXER (INTEGRATED) -LASER POWER CONTROL -LOGBOOK FUNCTION LASER CUTTING HEAD: -LASERSCHNEIDOPF WITH 5 "LENS -LASERSCHNEIDOPF WITH 7.5 "LENS -UNIVERSAL QUICK EXCHANGE DEVICE -CONTROLLINE CONTROL: -CONTROL SIEMENS SINUMERIK 840 D -AUTOMATIC SWITCH-OFF -CONTOURLINE -SPRINTLINE -TELESERVICE -MICROWELD -RJ45 NETWORK CONNECTOR -3.5 "FLOPPY DISK DRIVE -NETWORK CONNECTION VIA TELE-DIAGNOSIS SECURITY: -CE MARKING -LIGHT BARRIER -MULTI-CHAMBER EXHAUST SYSTEM -COMPACT COLLECTOR -SHOP FLOOR PROGRAMMING (ERRORS AND OMISSIONS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: imc solutions GmbH
Año de construcción: usado
Ubicación: Land-manufacturer anis trend d.o.o.<br/>type ats110-75d 60 tons <br/>year of construction 2019<br/>hours of operation 52 hours<br/>press power main press 59 tons<br/>specific press capacity 71 n/cm²<br/>bale density with material cardboard approx.450 kg/m³<br/>bale density with material pet- and hdpe bottles approx. 280 up to 320 kg/m³<br/>feed hopper 1,600 x 1,040 mm<br/>capacity per cycle 2,13 m³<br/>theoretic cycle time 10,7 sec.<br/>cycle time under operating conditions approx. 20 sec.<br/>theoretic throughput rate 441 m³/hour<br/>throughput rate under operating conditions approx. 235 m³/hour  <br/>bale size 1,100 x 770 x 1,200 up to 2,200 mm (w x h x l)<br/>driving motor 45 kw<br/>oil cooler 1,5 kw<br/>oil heater 2,0 kw<br/>main electric power 400 v / 50 hz<br/>connected load 49 kw (without conveyor)<br/>total input current 96 a<br/>power supply fuses 3 x 125 a<br/>power supply wire size 4 x 50 mm²<br/>isolations class ip 55<br/>tying system 4- fold vertical, fully automatic<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm approx. 7 up to 8 tons/hour<br/>bulk weight of 50 kg/cbm approx. 10 up to 12 tons/hour<br/>bulk weight of 80 kg/cbm approx. 14 up to 16 tons/hour<br/>throughput rate with ruffler approx. 15 tons/hour<br/>bale weight 450 up to 750 kg, depends on material and bale length<br/>bale weight mixed cardboard approx. 580 kg<br/>bale weight mixed paper approx.  650<br/>bale weight pet- and hdpe bottles approx. 300 kg<br/>volume hydraulic oil tank 1,000 l<br/>hydraulic system working pressure 290 bar<br/>sps controller (manuf., type) siemens et 200 s<br/>operating panel (manuf., type) siemens ktp 700<br/>baler dimensions built up without hopper 9,755 x 2,227 x 3,229 mm (l x w x h)<br/>transport dimensions only baler 9,600 x 2,200 x 2,750 mm<br/>machine weight baler approx. 20 tons<br/><br/>special features of the machine:<br/>german plc, siemens, type et 200 s with touch panel, siemens, type kpt 700, internet modem for online service and system diagnosis can be retrofitted.<br/>german hydraulic pump from bucher hydraulics, internal gear qx, 5th generation, extremely robust and durable for over 30 years.<br/>german hydraulic valves from parker, available at short notice throughout europe. <br/>wear-resistant hardox 450 plates in the pressing chamber (base and side walls), as well as the press stemp is equipped with hardox 450 plates all around. <br/>service-friendly motor/pump unit, over 500 x 500 mm flange plate can be dismantled in one unit without disconnecting the motor from the pump. <br/>all knives, on the press stemp as well as the counter knives in the frame are segmented, can be interchanged and can be rotated by 180°, so they can be used twice.<br/><br/>service of the manufacturer and its partners in europe:<br/>all wearing parts and spare parts, also hydraulic pumps and cylinders are available in 12 up to max. 24 hours by courier service.<br/>service technicians are on site within 24 up to max. 48 hours within europe. MANUFACTURER ANIS TREND D.O.O.
TYPE ATS110-75D 60 TONS
YEAR OF CONSTRUCTION 2019
HOURS OF OPERATION 52 HOURS
PRESS POWER MAIN PRESS 59 TONS
SPECIFIC PRESS CAPACITY 71 N/CM²
BALE DENSITY WITH MATERIAL CARDBOARD APPROX.450 KG/M³
BALE DENSITY WITH MATERIAL PET- AND HDPE BOTTLES APPROX. 280 UP TO 320 KG/M³
FEED HOPPER 1,600 X 1,040 MM
CAPACITY PER CYCLE 2,13 M³
THEORETIC CYCLE TIME 10,7 SEC.
CYCLE TIME UNDER OPERATING CONDITIONS APPROX. 20 SEC.
THEORETIC THROUGHPUT RATE 441 M³/HOUR
THROUGHPUT RATE UNDER OPERATING CONDITIONS APPROX. 235 M³/HOUR
BALE SIZE 1,100 X 770 X 1,200 UP TO 2,200 MM (W X H X L)
DRIVING MOTOR 45 KW
OIL COOLER 1,5 KW
OIL HEATER 2,0 KW
MAIN ELECTRIC POWER 400 V / 50 HZ
CONNECTED LOAD 49 KW (WITHOUT CONVEYOR)
TOTAL INPUT CURRENT 96 A
POWER SUPPLY FUSES 3 X 125 A
POWER SUPPLY WIRE SIZE 4 X 50 MM²
ISOLATIONS CLASS IP 55
TYING SYSTEM 4- FOLD VERTICAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 7 UP TO 8 TONS/HOUR
BULK WEIGHT OF 50 KG/CBM APPROX. 10 UP TO 12 TONS/HOUR
BULK WEIGHT OF 80 KG/CBM APPROX. 14 UP TO 16 TONS/HOUR
THROUGHPUT RATE WITH RUFFLER APPROX. 15 TONS/HOUR
BALE WEIGHT 450 UP TO 750 KG, DEPENDS ON MATERIAL AND BALE LENGTH
BALE WEIGHT MIXED CARDBOARD APPROX. 580 KG
BALE WEIGHT MIXED PAPER APPROX. 650
BALE WEIGHT PET- AND HDPE BOTTLES APPROX. 300 KG
VOLUME HYDRAULIC OIL TANK 1,000 L
HYDRAULIC SYSTEM WORKING PRESSURE 290 BAR
SPS CONTROLLER (MANUF., TYPE) SIEMENS ET 200 S
OPERATING PANEL (MANUF., TYPE) SIEMENS KTP 700
BALER DIMENSIONS BUILT UP WITHOUT HOPPER 9,755 X 2,227 X 3,229 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER 9,600 X 2,200 X 2,750 MM
MACHINE WEIGHT BALER APPROX. 20 TONS

SPECIAL FEATURES OF THE MACHINE:
GERMAN PLC, SIEMENS, TYPE ET 200 S WITH TOUCH PANEL, SIEMENS, TYPE KPT 700, INTERNET MODEM FOR ONLINE SERVICE AND SYSTEM DIAGNOSIS CAN BE RETROFITTED.
GERMAN HYDRAULIC PUMP FROM BUCHER HYDRAULICS, INTERNAL GEAR QX, 5TH GENERATION, EXTREMELY ROBUST AND DURABLE FOR OVER 30 YEARS.
GERMAN HYDRAULIC VALVES FROM PARKER, AVAILABLE AT SHORT NOTICE THROUGHOUT EUROPE.
WEAR-RESISTANT HARDOX 450 PLATES IN THE PRESSING CHAMBER (BASE AND SIDE WALLS), AS WELL AS THE PRESS STEMP IS EQUIPPED WITH HARDOX 450 PLATES ALL AROUND.
SERVICE-FRIENDLY MOTOR/PUMP UNIT, OVER 500 X 500 MM FLANGE PLATE CAN BE DISMANTLED IN ONE UNIT WITHOUT DISCONNECTING THE MOTOR FROM THE PUMP.
ALL KNIVES, ON THE PRESS STEMP AS WELL AS THE COUNTER KNIVES IN THE FRAME ARE SEGMENTED, CAN BE INTERCHANGED AND CAN BE ROTATED BY 180°, SO THEY CAN BE USED TWICE.

SERVICE OF THE MANUFACTURER AND ITS PARTNERS IN EUROPE:
ALL WEARING PARTS AND SPARE PARTS, ALSO HYDRAULIC PUMPS AND CYLINDERS ARE AVAILABLE IN 12 UP TO MAX. 24 HOURS BY COURIER SERVICE.
SERVICE TECHNICIANS ARE ON SITE WITHIN 24 UP TO MAX. 48 HOURS WITHIN EUROPE.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 2.800 €
Ubicación: Land-used set up
int. machine number: m2748
manufacturer martin
type t 51

planing width 510 mm
task table length 1,400 mm
tax table length 1,100 mm
weight 850 kg
total length approx. 2.75 m
4-drum
slotted table lips
hydraulic table adjustment
with gauge and various knives

item location: 58730 frã¶ndenberg/ruhr

the machine can be visited like to see power and tried out.

we will gladly send you more photos by e-mail.

a forklift/crane for loading is available.

we reserve the right to a sale.

there is the way learned to examine suburb for sale articles. specific questions should be clarified in advance. the information, technical data, dimensions, year, condition are non-binding and were shown to the best of my knowledge and belief. errors are reserved. the warranty / guarantee is excluded. the goods will be sold from location / camp, with national transfer of risk to the buyer, this also applies to a shipping from us, which we have carried out on your behalf. this offer is only to traders, merchants and legal persons.
specified trade names, and trademarks are property of their owners and are used only for identification and description of products.

the structure and the electrical connection of the machine / the device must be carried out by a qualified person trained or checked.

see also my other offers.

the article must be paid unless otherwise agreed within 14 days of invoice creation and picked up.
otherwise, the cost of the storage charge must be made. USED SET UP INT. MACHINE NUMBER: M2748 MANUFACTURER MARTIN TYPE T 51 PLANING WIDTH 510 MM TASK TABLE LENGTH 1,400 MM TAX TABLE LENGTH 1,100 MM WEIGHT 850 KG TOTAL LENGTH APPROX. 2.75 M 4-DRUM SLOTTED TABLE LIPS HYDRAULIC TABLE ADJUSTMENT WITH GAUGE AND VARIOUS KNIVES ITEM LOCATION: 58730 FR&ATILDE;&PARA;NDENBERG/RUHR THE MACHINE CAN BE VISITED LIKE TO SEE POWER AND TRIED OUT. WE WILL GLADLY SEND YOU MORE PHOTOS BY E-MAIL. A FORKLIFT/CRANE FOR LOADING IS AVAILABLE. WE RESERVE THE RIGHT TO A SALE. THERE IS THE WAY LEARNED TO EXAMINE SUBURB FOR SALE ARTICLES. SPECIFIC QUESTIONS SHOULD BE CLARIFIED IN ADVANCE. THE INFORMATION, TECHNICAL DATA, DIMENSIONS, YEAR, CONDITION ARE NON-BINDING AND WERE SHOWN TO THE BEST OF MY KNOWLEDGE AND BELIEF. ERRORS ARE RESERVED. THE WARRANTY / GUARANTEE IS EXCLUDED. THE GOODS WILL BE SOLD FROM LOCATION / CAMP, WITH NATIONAL TRANSFER OF RISK TO THE BUYER, THIS ALSO APPLIES TO A SHIPPING FROM US, WHICH WE HAVE CARRIED OUT ON YOUR BEHALF. THIS OFFER IS ONLY TO TRADERS, MERCHANTS AND LEGAL PERSONS. SPECIFIED TRADE NAMES, AND TRADEMARKS ARE PROPERTY OF THEIR OWNERS AND ARE USED ONLY FOR IDENTIFICATION AND DESCRIPTION OF PRODUCTS. THE STRUCTURE AND THE ELECTRICAL CONNECTION OF THE MACHINE / THE DEVICE MUST BE CARRIED OUT BY A QUALIFIED PERSON TRAINED OR CHECKED. SEE ALSO MY OTHER OFFERS. THE ARTICLE MUST BE PAID UNLESS OTHERWISE AGREED WITHIN 14 DAYS OF INVOICE CREATION AND PICKED UP. OTHERWISE, THE COST OF THE STORAGE CHARGE MUST BE MADE.
Vendedor: Fritz Ernst Maschinenhandel e K
Año de construcción: usado
Ubicación: Land-manufacturer  unotech gmbh, niederlangen, germany<br/>typ 120 v5<br/>year of construction 2009<br/>press force main press 100 tons<br/>specific press force 145 n/m²<br/>max. cutting force 120 tons<br/>press force free stamper 25 tons<br/>feed channel 2.000 x 1.020 mm (l x w)<br/>capacity per cycle time 1,5 m³<br/>theoretic  throughput capacity 850 m³/h<br/>throughput capacity under operating conditions approx. 510 m³/hour<br/>bale size 1.100 x 750 mm (w x h)<br/>driving motor 2 x 75 kw with axial piston pumps<br/>connected load 160 kw<br/>rated current 280 a<br/>tying system 5-fold vertical, fully automatic<br/>throughput capacity at a<br/>bulk weight of 30 kg/cbm up to 15 tons/h<br/>bulk weight of 50 kg/cbm up to 25 tons/h<br/>bulk weight of 60 kg/cbm up to 30 tons/h<br/>bulk weight of 80 kg/cbm up to 40 tons/h<br/>bulk weight of 100 kg/cbm up to 50 tons/h<br/>bale weight 600 up to 900 kg, depends on material<br/>sps controller (manuf., type)  siemens s7 300<br/>operating panel (manuf., type)  siemens simatic<br/>baler dimensions built up with hopper 20,000 x 23,000 x 6,190 mm (l x w x h)<br/>transport dimensions only baler 13,630 x 2,350 x 3,130 mm (l x w x h)<br/>machine weight baler approx. 37 tons<br/><br/>accessories:<br/>4 pieces wire stations for a total of 10 pieces 500 kg wire coils (wire not included in the sales volume)<br/>1 piece bale slider<br/><br/>condition of the baler:<br/>the baler was operated almost exclusively with paper and cardboard, therefore the low wear and tear. the machine has been serviced regularly and is in a really good condition, ready for operation  and need not fear any comparison. uncompromising quality from germany with unique technical refinements distinguish this baler made by unotech.<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available. an inspection is possible by appointment. we will not assume liability for the given technical data and possible errors.<br/><br/>technical data conveyor belt:<br/>manufacturer unotech<br/>typ kth 1700<br/>year of construction 2009<br/>driving motor 5,5 kw<br/>length feeding conveyor 6,000 mm<br/>length elevating conveyor 10,233 mm<br/>length goose neck 1,500 mm<br/>grade 30°<br/>effecting width 1,625 mm<br/>height of side wall feeding conv. 500 mm<br/>height of side wall elevating conv. 1,000 mm<br/>transport dimensions over all<br/>feeding conveyor 7,000 x 2,200 x 1,200 mm (l x w x h)<br/>elevating conveyor 13,600 x 2,200 x 1,500 mm (l x w x h)<br/>pit dimensions (conveyor belt) 10,650 x 2,125 / 3,640 mm x 1,200 mm (l x w x h)<br/><br/>condition of the conveyor belt:<br/>the running rails, chains and the rubber belt are in a good and immediately operational condition.<br/><br/>accessories:<br/>pit cover MANUFACTURER UNOTECH GMBH, NIEDERLANGEN, GERMANY
TYP 120 V5
YEAR OF CONSTRUCTION 2009
PRESS FORCE MAIN PRESS 100 TONS
SPECIFIC PRESS FORCE 145 N/M²
MAX. CUTTING FORCE 120 TONS
PRESS FORCE FREE STAMPER 25 TONS
FEED CHANNEL 2.000 X 1.020 MM (L X W)
CAPACITY PER CYCLE TIME 1,5 M³
THEORETIC THROUGHPUT CAPACITY 850 M³/H
THROUGHPUT CAPACITY UNDER OPERATING CONDITIONS APPROX. 510 M³/HOUR
BALE SIZE 1.100 X 750 MM (W X H)
DRIVING MOTOR 2 X 75 KW WITH AXIAL PISTON PUMPS
CONNECTED LOAD 160 KW
RATED CURRENT 280 A
TYING SYSTEM 5-FOLD VERTICAL, FULLY AUTOMATIC
THROUGHPUT CAPACITY AT A
BULK WEIGHT OF 30 KG/CBM UP TO 15 TONS/H
BULK WEIGHT OF 50 KG/CBM UP TO 25 TONS/H
BULK WEIGHT OF 60 KG/CBM UP TO 30 TONS/H
BULK WEIGHT OF 80 KG/CBM UP TO 40 TONS/H
BULK WEIGHT OF 100 KG/CBM UP TO 50 TONS/H
BALE WEIGHT 600 UP TO 900 KG, DEPENDS ON MATERIAL
SPS CONTROLLER (MANUF., TYPE) SIEMENS S7 300
OPERATING PANEL (MANUF., TYPE) SIEMENS SIMATIC
BALER DIMENSIONS BUILT UP WITH HOPPER 20,000 X 23,000 X 6,190 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER 13,630 X 2,350 X 3,130 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 37 TONS

ACCESSORIES:
4 PIECES WIRE STATIONS FOR A TOTAL OF 10 PIECES 500 KG WIRE COILS (WIRE NOT INCLUDED IN THE SALES VOLUME)
1 PIECE BALE SLIDER

CONDITION OF THE BALER:
THE BALER WAS OPERATED ALMOST EXCLUSIVELY WITH PAPER AND CARDBOARD, THEREFORE THE LOW WEAR AND TEAR. THE MACHINE HAS BEEN SERVICED REGULARLY AND IS IN A REALLY GOOD CONDITION, READY FOR OPERATION AND NEED NOT FEAR ANY COMPARISON. UNCOMPROMISING QUALITY FROM GERMANY WITH UNIQUE TECHNICAL REFINEMENTS DISTINGUISH THIS BALER MADE BY UNOTECH.

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. AN INSPECTION IS POSSIBLE BY APPOINTMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.

TECHNICAL DATA CONVEYOR BELT:
MANUFACTURER UNOTECH
TYP KTH 1700
YEAR OF CONSTRUCTION 2009
DRIVING MOTOR 5,5 KW
LENGTH FEEDING CONVEYOR 6,000 MM
LENGTH ELEVATING CONVEYOR 10,233 MM
LENGTH GOOSE NECK 1,500 MM
GRADE 30°
EFFECTING WIDTH 1,625 MM
HEIGHT OF SIDE WALL FEEDING CONV. 500 MM
HEIGHT OF SIDE WALL ELEVATING CONV. 1,000 MM
TRANSPORT DIMENSIONS OVER ALL
FEEDING CONVEYOR 7,000 X 2,200 X 1,200 MM (L X W X H)
ELEVATING CONVEYOR 13,600 X 2,200 X 1,500 MM (L X W X H)
PIT DIMENSIONS (CONVEYOR BELT) 10,650 X 2,125 / 3,640 MM X 1,200 MM (L X W X H)

CONDITION OF THE CONVEYOR BELT:
THE RUNNING RAILS, CHAINS AND THE RUBBER BELT ARE IN A GOOD AND IMMEDIATELY OPERATIONAL CONDITION.

ACCESSORIES:
PIT COVER
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 500 €
Ubicación: Land-year built: approx 1998
const..: approx. 300 bar
weight: 350 kg

other: the hydraulic unit comes from a coordenades - stamping & punching machine trumpf tc 240

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
every interested party can advance test under power the hydraulic power pack.
 YEAR BUILT: APPROX 1998 CONST..: APPROX. 300 BAR WEIGHT: 350 KG OTHER: THE HYDRAULIC UNIT COMES FROM A COORDENADES - STAMPING & PUNCHING MACHINE TRUMPF TC 240 ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EVERY INTERESTED PARTY CAN ADVANCE TEST UNDER POWER THE HYDRAULIC POWER PACK.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-manufacturer boa<br/>typ 182 lb 6p super<br/>year of construction 1998<br/>working hours 36,012 h stand april<br/>press power main press 90 tons<br/>press power of pre-press 1 + 2 41,7 / 47,2 tons<br/>feed channel 1,620 x 1,080 mm (l x w)<br/>capacity per cycle time 2,5 cbm<br/>bale size 1,100 x 800 mm (w x h) length adjustable<br/>driving motor 2 x 55 kw<br/>connected load 130 kw<br/>tying system 4-fold vertical, fully automated<br/>throughput rate at a  <br/>bulk weight of 20 up to 40  kg/cbm approx. 8 up to 12 tons/h<br/>bulk weight of 60 up to 80  kg/cbm approx. 16 up to 22 tons/h<br/>bulk weight of 100 up to120 kg/cbm approx. 24 up to 28 tons/h<br/>bale weight approx. 500 up to 600 kg<br/>volume hydraulic tank approx. 1,400 l<br/>baler dimensions built up with hopper approx.11,500 x 2,400 x 4,260 mm (l x w x h)<br/>transport dimensions only baler approx. 11,500 x 2,400 x 3,000 mm (l x w x h)<br/>machine weight baler approx. 26 tons<br/> <br/>comments: the machine has been serviced regularly and is in good condition. in the last two years various parts have been renewed, such as both high-pressure pumps, seals from the main hydraulic cylinder, the press floor, the rollers from the press ram and much more. an inspection during operation is possible by appointment. we accept no liability for technical data or possible errors. MANUFACTURER BOA
TYP 182 LB 6P SUPER
YEAR OF CONSTRUCTION 1998
WORKING HOURS 36,012 H STAND APRIL
PRESS POWER MAIN PRESS 90 TONS
PRESS POWER OF PRE-PRESS 1 + 2 41,7 / 47,2 TONS
FEED CHANNEL 1,620 X 1,080 MM (L X W)
CAPACITY PER CYCLE TIME 2,5 CBM
BALE SIZE 1,100 X 800 MM (W X H) LENGTH ADJUSTABLE
DRIVING MOTOR 2 X 55 KW
CONNECTED LOAD 130 KW
TYING SYSTEM 4-FOLD VERTICAL, FULLY AUTOMATED
THROUGHPUT RATE AT A
BULK WEIGHT OF 20 UP TO 40 KG/CBM APPROX. 8 UP TO 12 TONS/H
BULK WEIGHT OF 60 UP TO 80 KG/CBM APPROX. 16 UP TO 22 TONS/H
BULK WEIGHT OF 100 UP TO120 KG/CBM APPROX. 24 UP TO 28 TONS/H
BALE WEIGHT APPROX. 500 UP TO 600 KG
VOLUME HYDRAULIC TANK APPROX. 1,400 L
BALER DIMENSIONS BUILT UP WITH HOPPER APPROX.11,500 X 2,400 X 4,260 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER APPROX. 11,500 X 2,400 X 3,000 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 26 TONS

COMMENTS: THE MACHINE HAS BEEN SERVICED REGULARLY AND IS IN GOOD CONDITION. IN THE LAST TWO YEARS VARIOUS PARTS HAVE BEEN RENEWED, SUCH AS BOTH HIGH-PRESSURE PUMPS, SEALS FROM THE MAIN HYDRAULIC CYLINDER, THE PRESS FLOOR, THE ROLLERS FROM THE PRESS RAM AND MUCH MORE. AN INSPECTION DURING OPERATION IS POSSIBLE BY APPOINTMENT. WE ACCEPT NO LIABILITY FOR TECHNICAL DATA OR POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-
ges. kant length: 2000 mm
kantlstg.: 35 to.
total power: 4,5 kw / 400 v
machine weight: approx. 3000 kg

equipment / accessories:

electrically adjustable backgauge
various tools according to photo
security shield
2 hd control panel with emergency - off switch.

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
anyone can test the machine before purchasing in our factory under power.
 GES. KANT LENGTH: 2000 MM KANTLSTG.: 35 TO. TOTAL POWER: 4,5 KW / 400 V MACHINE WEIGHT: APPROX. 3000 KG EQUIPMENT / ACCESSORIES: ELECTRICALLY ADJUSTABLE BACKGAUGE VARIOUS TOOLS ACCORDING TO PHOTO SECURITY SHIELD 2 HD CONTROL PANEL WITH EMERGENCY - OFF SWITCH. ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. ANYONE CAN TEST THE MACHINE BEFORE PURCHASING IN OUR FACTORY UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-passage width:  mm<br/>working heigth:  mm<br/>--------------------------------------------------:  <br/>electrical specifications:  <br/>- mains power supply:     54 kva<br/>- mains voltage:    400 v<br/>- mains frequency:     50 hz<br/>cleaning and drying of metal parts<br/><br/>structure:<br/>+ cleaning zone<br/>+ drip zone 1<br/>+ spray guns 1<br/>+ drip zone 2<br/>+ spray guns 2 (conservation)<br/>+ drip zone 3<br/>+ drying (incl. heat recovery)<br/><br/><br/>part size: max. 800x20mm (wxh)<br/><br/>+ only approx. 9,000 operating hours!<br/><br/><br/><br/><br/> PASSAGE WIDTH: MM
WORKING HEIGTH: MM
--------------------------------------------------:
ELECTRICAL SPECIFICATIONS:
- MAINS POWER SUPPLY: 54 KVA
- MAINS VOLTAGE: 400 V
- MAINS FREQUENCY: 50 HZ
CLEANING AND DRYING OF METAL PARTS

STRUCTURE:
+ CLEANING ZONE
+ DRIP ZONE 1
+ SPRAY GUNS 1
+ DRIP ZONE 2
+ SPRAY GUNS 2 (CONSERVATION)
+ DRIP ZONE 3
+ DRYING (INCL. HEAT RECOVERY)


PART SIZE: MAX. 800X20MM (WXH)

+ ONLY APPROX. 9,000 OPERATING HOURS!




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-we sell a used paternoster circular shelf.

type: cargo 2500
manufacturer: zambelli
max. load capacity: 250 kg
max. total load: 3.500 kg
nominal power: 3,0 kw

a visit is possible after agreement at any time. the tour can be done in an operable state.

our sister company is a manufacturer. thus, the removal (disassembly and re-assembly), as well as div. services can be conveyed.
a self removal is possible.   WE SELL A USED PATERNOSTER CIRCULAR SHELF. TYPE: CARGO 2500 MANUFACTURER: ZAMBELLI MAX. LOAD CAPACITY: 250 KG MAX. TOTAL LOAD: 3.500 KG NOMINAL POWER: 3,0 KW A VISIT IS POSSIBLE AFTER AGREEMENT AT ANY TIME. THE TOUR CAN BE DONE IN AN OPERABLE STATE. OUR SISTER COMPANY IS A MANUFACTURER. THUS, THE REMOVAL (DISASSEMBLY AND RE-ASSEMBLY), AS WELL AS DIV. SERVICES CAN BE CONVEYED. A SELF REMOVAL IS POSSIBLE.
Vendedor: Zambelli Fertigungs GmbH & Co.KG
Año de construcción: usado
Precio: 6.800 €
Ubicación: Land-bore diameter: 8 mm<br/>number of heads horizontal: 5 st.<br/>number of heads vertical: 3 st.<br/>control: ja <br/>! machine is still in use and can be visited!<br/><br/>to sell on behalf of the customer!<br/><br/>1 stegherr drilling center type bz<br/>**************************************<br/>the machine has 3 aggregate slides, of which aggregate slides<br/>1 fixed and unit slides 2 and 3 via the control to preset values<br/>be positioned.<br/><br/>unit carriage 1 (fixed) equipped with:<br/>-------------------------------------------------- -<br/><br/>a) 1 drilling unit for drilling the front side of the workpieces with<br/>  triple drill head, drilling distance: 28/41 mm<br/>- drilling spindles individually retrievable<br/>- drilling stroke: max. 80 mm<br/>- speed ??of the drilling spindles: approx. 4000 rpm<br/>- engine power: approx. 1.1 kw<br/>- chip extraction: diameter 160 mm<br/>- suction hose upwards<br/><br/>b) 1 stainless steel high pressure glue nozzle<br/>- legemount adjustable via program<br/>- glue monitoring via program<br/><br/>c) 1 dowel driving head for dowel diameter 8 mm, dowel length 60 mm<br/>- feeding and separation of the dowels via vibratory conveyors<br/>  3 dowels, arranged like drill head, driving in max. 3 dowels<br/>  in one operation<br/>- workpiece stop, lowered via pneumatic cylinder, around the workpiece<br/>  to strike exactly<br/><br/>d) 1 top bandbohraggregat arranged from above, with triple drill head<br/>  for roto pot bore<br/>- drilling stroke: max. 80 mm<br/>- engine power: approx. 1.1 kw<br/>- speed: about 4500 rpm<br/><br/>e) 1 carriage with controlled axis (x)<br/>  for moving the drilling, glueing and dividing unit to the programmed<br/>  drilling positions<br/>- swivel axis, swivel range 90 °<br/>  for converting the drilling unit from end to longitudinal operation<br/>  here, the entire axis (x) is also swiveled around this axis<br/>  to be used for longitudinal operation<br/><br/>aggregate carriage 2<br/><br/>the entire unit can be positioned in the x-axis via a servomotor and<br/>can thus reach any position on the workpiece and there the programmed<br/>doing work.<br/><br/>the aggregate carriage is equipped with:<br/><br/>a) drilling unit with 3 individually retrievable spindles for drilling the<br/>  fighter, rung and post drilling patterns on the long side of the workpiece<br/>  or the dowel holes on the workpiece ends.<br/>- drilling distance: 28/41 mm<br/>- drilling stroke for each spindle: max. 80 mm<br/>- speed: about 4000 rpm<br/>- engine power: approx. 1.1 kw<br/><br/>b) drilling unit for lock plate hole, equipped with:<br/><br/>- simple boring head<br/>- fixed in height - distance from workpiece support: 51 mm<br/>- drill diameter: 2.5 mm<br/>- drilling stroke: max. 80 mm<br/>- speed: about 4500 rpm<br/>- engine power: approx. 1.1 kw<br/><br/>c) drilling unit for mounting holes:<br/><br/>- drilling stroke: max. 80 mm<br/>- speed: about 4500 rpm<br/>- engine power: approx. 1.1 kw<br/>- mechanically fixed in height - distance from workpiece support: 31 mm<br/><br/>d) workpiece support table<br/>  with pneumatic workpiece clamping device and mounted topfandbohraggregat<br/>- can be disconnected voom unit carriage (pneumatic) and the<br/>  aggregate slides can each over this point left or right<br/>  bohraufgabenausführen. this is horizontal from each one<br/>  arranged aggregate possible until the end of the workpiece<br/><br/>e) topfandbohraggregat arranged from above with triple drill head<br/>  for roto pot bore<br/>- drilling stroke: max. 80 mm<br/>- engine power: approx. 1.1 kw<br/>- speed: about 4500 rpm<br/><br/>aggregate carriage 3<br/><br/>servo axis in x direction, this turns on program on the<br/>workpiece length.<br/><br/>a) 1 drilling unit for drilling the front side of the wersktücke with triple <br/>drill head<br/>- drilling distance: 28/41 mm<br/>- drilling spindles individually retrievable<br/>- drilling stroke: max. 80 mm<br/>- drehzhal the drill spindles: about 4000 u / min<br/>- engine power: approx. 1.1 kw<br/>- chip extraction: diameter 160 mm<br/>- suction hose upwards<br/><br/>b) 1 stainless steel high pressure glue nozzle<br/>- legemount adjustable via program<br/>- glue monitoring via program<br/><br/>c) 1 dowel driving head for dowel diameter 8 mm, dowel length 60 mm<br/>- feeding and separation of the dowels via vibratory conveyors<br/>- 3 dowels, arranged like drill head, driving max. 3 dowels<br/>  in one operation<br/>- workpiece stop, lowered via pneumatic cylinder, around the workpiece<br/>  to strike exactly<br/><br/>d) 1 topfbandbohraggregat arranged from above<br/>  with triple drill head for roto pot bore<br/>- drilling stroke: max. 80 mm<br/>- engine power: approx. 1.1 kw<br/>- speed: about 4500 rpm<br/><br/>e) 1 carriage with controlled axis (x)<br/>  for moving the drilling, glue and dowel unit to the programmed<br/>  drilling positions<br/>- swivel axis, swivel range 90 °, for converting the drilling unit of<br/>  forehead-on longitudinal operation.<br/>  here, the entire axis (x) is also swiveled around this axis<br/>  to be used for longitudinal operation<br/><br/>the entire unit can be positioned in the x-axis via a servomotor and<br/>can thus reach any position on the workpiece and there the programmed<br/>doing work.<br/><br/>workpiece length scanning, so that the end holes are at the exact distance from<br/>external dimensions can be set.<br/>drilling unit automatically corrects any length deviations on the workpiece<br/>within a certain tolerance range.<br/><br/>for workpieces longer than 3 m, this workpiece must be in two working lengths<br/>be processed.<br/><br/>technical specifications:<br/><br/>- max. workpiece length: 3000 mm<br/>- min. workpiece length: 320 mm<br/>- workpiece thickness: 40-80 mm<br/>- workpiece clamping: pneumatic<br/>- workpiece loading or unloading: manually<br/>- all travel paths run on high-precision linear guides<br/>- 4 electronically program controlled axes (ball screw operation<br/>  or rack)<br/>- high-pressure glue system in stainless steel<br/>- glue monitoring via program<br/>- leichenge adjustable via control<br/>- 1 dowel vibration conveyor (large version) for anchor diameter 8 mm,<br/>  dowel length 60 mm<br/>- six-track dowel separation and feed (3x for right, 3x for left)<br/><br/>machine power is about 4 parts per minute. this is an average,<br/>which in individual cases may vary slightly upwards or downwards.<br/><br/>control of the machine<br/><br/>- pc / plc control based on windows<br/>- pc in industrial design with floppy disk drive, keyboard and<br/>  15farbbild flat monitor<br/>- user friendly machine program<br/>- high storage capacity<br/>- graphic blocks for visualization of the programmed drilling patterns<br/>program with error indication, i. errors that occur in the program flow<br/>  can be displayed on the screen and can thereby<br/>  be localized faster and corrected.<br/><br/>- extraction: 3 x diameter 160 upwards<br/>- extraction speed: approx. 25 m / s<br/><br/>the machine is online-enabled<br/><br/><br/>(techn. data according to manufacturer - without guarantee!)<br/><br/><br/><br/><br/> BORE DIAMETER: 8 MM
NUMBER OF HEADS HORIZONTAL: 5 ST.
NUMBER OF HEADS VERTICAL: 3 ST.
CONTROL: JA
! MACHINE IS STILL IN USE AND CAN BE VISITED!

TO SELL ON BEHALF OF THE CUSTOMER!

1 STEGHERR DRILLING CENTER TYPE BZ
**************************************
THE MACHINE HAS 3 AGGREGATE SLIDES, OF WHICH AGGREGATE SLIDES
1 FIXED AND UNIT SLIDES 2 AND 3 VIA THE CONTROL TO PRESET VALUES
BE POSITIONED.

UNIT CARRIAGE 1 (FIXED) EQUIPPED WITH:
-------------------------------------------------- -

A) 1 DRILLING UNIT FOR DRILLING THE FRONT SIDE OF THE WORKPIECES WITH
TRIPLE DRILL HEAD, DRILLING DISTANCE: 28/41 MM
- DRILLING SPINDLES INDIVIDUALLY RETRIEVABLE
- DRILLING STROKE: MAX. 80 MM
- SPEED ??OF THE DRILLING SPINDLES: APPROX. 4000 RPM
- ENGINE POWER: APPROX. 1.1 KW
- CHIP EXTRACTION: DIAMETER 160 MM
- SUCTION HOSE UPWARDS

B) 1 STAINLESS STEEL HIGH PRESSURE GLUE NOZZLE
- LEGEMOUNT ADJUSTABLE VIA PROGRAM
- GLUE MONITORING VIA PROGRAM

C) 1 DOWEL DRIVING HEAD FOR DOWEL DIAMETER 8 MM, DOWEL LENGTH 60 MM
- FEEDING AND SEPARATION OF THE DOWELS VIA VIBRATORY CONVEYORS
3 DOWELS, ARRANGED LIKE DRILL HEAD, DRIVING IN MAX. 3 DOWELS
IN ONE OPERATION
- WORKPIECE STOP, LOWERED VIA PNEUMATIC CYLINDER, AROUND THE WORKPIECE
TO STRIKE EXACTLY

D) 1 TOP BANDBOHRAGGREGAT ARRANGED FROM ABOVE, WITH TRIPLE DRILL HEAD
FOR ROTO POT BORE
- DRILLING STROKE: MAX. 80 MM
- ENGINE POWER: APPROX. 1.1 KW
- SPEED: ABOUT 4500 RPM

E) 1 CARRIAGE WITH CONTROLLED AXIS (X)
FOR MOVING THE DRILLING, GLUEING AND DIVIDING UNIT TO THE PROGRAMMED
DRILLING POSITIONS
- SWIVEL AXIS, SWIVEL RANGE 90 °
FOR CONVERTING THE DRILLING UNIT FROM END TO LONGITUDINAL OPERATION
HERE, THE ENTIRE AXIS (X) IS ALSO SWIVELED AROUND THIS AXIS
TO BE USED FOR LONGITUDINAL OPERATION

AGGREGATE CARRIAGE 2

THE ENTIRE UNIT CAN BE POSITIONED IN THE X-AXIS VIA A SERVOMOTOR AND
CAN THUS REACH ANY POSITION ON THE WORKPIECE AND THERE THE PROGRAMMED
DOING WORK.

THE AGGREGATE CARRIAGE IS EQUIPPED WITH:

A) DRILLING UNIT WITH 3 INDIVIDUALLY RETRIEVABLE SPINDLES FOR DRILLING THE
FIGHTER, RUNG AND POST DRILLING PATTERNS ON THE LONG SIDE OF THE WORKPIECE
OR THE DOWEL HOLES ON THE WORKPIECE ENDS.
- DRILLING DISTANCE: 28/41 MM
- DRILLING STROKE FOR EACH SPINDLE: MAX. 80 MM
- SPEED: ABOUT 4000 RPM
- ENGINE POWER: APPROX. 1.1 KW

B) DRILLING UNIT FOR LOCK PLATE HOLE, EQUIPPED WITH:

- SIMPLE BORING HEAD
- FIXED IN HEIGHT - DISTANCE FROM WORKPIECE SUPPORT: 51 MM
- DRILL DIAMETER: 2.5 MM
- DRILLING STROKE: MAX. 80 MM
- SPEED: ABOUT 4500 RPM
- ENGINE POWER: APPROX. 1.1 KW

C) DRILLING UNIT FOR MOUNTING HOLES:

- DRILLING STROKE: MAX. 80 MM
- SPEED: ABOUT 4500 RPM
- ENGINE POWER: APPROX. 1.1 KW
- MECHANICALLY FIXED IN HEIGHT - DISTANCE FROM WORKPIECE SUPPORT: 31 MM

D) WORKPIECE SUPPORT TABLE
WITH PNEUMATIC WORKPIECE CLAMPING DEVICE AND MOUNTED TOPFANDBOHRAGGREGAT
- CAN BE DISCONNECTED VOOM UNIT CARRIAGE (PNEUMATIC) AND THE
AGGREGATE SLIDES CAN EACH OVER THIS POINT LEFT OR RIGHT
BOHRAUFGABENAUSFüHREN. THIS IS HORIZONTAL FROM EACH ONE
ARRANGED AGGREGATE POSSIBLE UNTIL THE END OF THE WORKPIECE

E) TOPFANDBOHRAGGREGAT ARRANGED FROM ABOVE WITH TRIPLE DRILL HEAD
FOR ROTO POT BORE
- DRILLING STROKE: MAX. 80 MM
- ENGINE POWER: APPROX. 1.1 KW
- SPEED: ABOUT 4500 RPM

AGGREGATE CARRIAGE 3

SERVO AXIS IN X DIRECTION, THIS TURNS ON PROGRAM ON THE
WORKPIECE LENGTH.

A) 1 DRILLING UNIT FOR DRILLING THE FRONT SIDE OF THE WERSKTüCKE WITH TRIPLE
DRILL HEAD
- DRILLING DISTANCE: 28/41 MM
- DRILLING SPINDLES INDIVIDUALLY RETRIEVABLE
- DRILLING STROKE: MAX. 80 MM
- DREHZHAL THE DRILL SPINDLES: ABOUT 4000 U / MIN
- ENGINE POWER: APPROX. 1.1 KW
- CHIP EXTRACTION: DIAMETER 160 MM
- SUCTION HOSE UPWARDS

B) 1 STAINLESS STEEL HIGH PRESSURE GLUE NOZZLE
- LEGEMOUNT ADJUSTABLE VIA PROGRAM
- GLUE MONITORING VIA PROGRAM

C) 1 DOWEL DRIVING HEAD FOR DOWEL DIAMETER 8 MM, DOWEL LENGTH 60 MM
- FEEDING AND SEPARATION OF THE DOWELS VIA VIBRATORY CONVEYORS
- 3 DOWELS, ARRANGED LIKE DRILL HEAD, DRIVING MAX. 3 DOWELS
IN ONE OPERATION
- WORKPIECE STOP, LOWERED VIA PNEUMATIC CYLINDER, AROUND THE WORKPIECE
TO STRIKE EXACTLY

D) 1 TOPFBANDBOHRAGGREGAT ARRANGED FROM ABOVE
WITH TRIPLE DRILL HEAD FOR ROTO POT BORE
- DRILLING STROKE: MAX. 80 MM
- ENGINE POWER: APPROX. 1.1 KW
- SPEED: ABOUT 4500 RPM

E) 1 CARRIAGE WITH CONTROLLED AXIS (X)
FOR MOVING THE DRILLING, GLUE AND DOWEL UNIT TO THE PROGRAMMED
DRILLING POSITIONS
- SWIVEL AXIS, SWIVEL RANGE 90 °, FOR CONVERTING THE DRILLING UNIT OF
FOREHEAD-ON LONGITUDINAL OPERATION.
HERE, THE ENTIRE AXIS (X) IS ALSO SWIVELED AROUND THIS AXIS
TO BE USED FOR LONGITUDINAL OPERATION

THE ENTIRE UNIT CAN BE POSITIONED IN THE X-AXIS VIA A SERVOMOTOR AND
CAN THUS REACH ANY POSITION ON THE WORKPIECE AND THERE THE PROGRAMMED
DOING WORK.

WORKPIECE LENGTH SCANNING, SO THAT THE END HOLES ARE AT THE EXACT DISTANCE FROM
EXTERNAL DIMENSIONS CAN BE SET.
DRILLING UNIT AUTOMATICALLY CORRECTS ANY LENGTH DEVIATIONS ON THE WORKPIECE
WITHIN A CERTAIN TOLERANCE RANGE.

FOR WORKPIECES LONGER THAN 3 M, THIS WORKPIECE MUST BE IN TWO WORKING LENGTHS
BE PROCESSED.

TECHNICAL SPECIFICATIONS:

- MAX. WORKPIECE LENGTH: 3000 MM
- MIN. WORKPIECE LENGTH: 320 MM
- WORKPIECE THICKNESS: 40-80 MM
- WORKPIECE CLAMPING: PNEUMATIC
- WORKPIECE LOADING OR UNLOADING: MANUALLY
- ALL TRAVEL PATHS RUN ON HIGH-PRECISION LINEAR GUIDES
- 4 ELECTRONICALLY PROGRAM CONTROLLED AXES (BALL SCREW OPERATION
OR RACK)
- HIGH-PRESSURE GLUE SYSTEM IN STAINLESS STEEL
- GLUE MONITORING VIA PROGRAM
- LEICHENGE ADJUSTABLE VIA CONTROL
- 1 DOWEL VIBRATION CONVEYOR (LARGE VERSION) FOR ANCHOR DIAMETER 8 MM,
DOWEL LENGTH 60 MM
- SIX-TRACK DOWEL SEPARATION AND FEED (3X FOR RIGHT, 3X FOR LEFT)

MACHINE POWER IS ABOUT 4 PARTS PER MINUTE. THIS IS AN AVERAGE,
WHICH IN INDIVIDUAL CASES MAY VARY SLIGHTLY UPWARDS OR DOWNWARDS.

CONTROL OF THE MACHINE

- PC / PLC CONTROL BASED ON WINDOWS
- PC IN INDUSTRIAL DESIGN WITH FLOPPY DISK DRIVE, KEYBOARD AND
15FARBBILD FLAT MONITOR
- USER FRIENDLY MACHINE PROGRAM
- HIGH STORAGE CAPACITY
- GRAPHIC BLOCKS FOR VISUALIZATION OF THE PROGRAMMED DRILLING PATTERNS
PROGRAM WITH ERROR INDICATION, I. ERRORS THAT OCCUR IN THE PROGRAM FLOW
CAN BE DISPLAYED ON THE SCREEN AND CAN THEREBY
BE LOCALIZED FASTER AND CORRECTED.

- EXTRACTION: 3 X DIAMETER 160 UPWARDS
- EXTRACTION SPEED: APPROX. 25 M / S

THE MACHINE IS ONLINE-ENABLED


(TECHN. DATA ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-we sell a used paternoster circular shelf.

type: cargo 5000
manufacturer: zambelli metalltechnik gmbh & co.kg
max. load capacity: 500 kg
max. total load: 14,000 kg
nominal power: 2 x 3,0 kw

a visit is possible after agreement at any time. the tour can be done in an operable state.

our sister company is a manufacturer. thus, the removal (disassembly and re-assembly), as well as div. services can be conveyed.
a self removal is possible.   WE SELL A USED PATERNOSTER CIRCULAR SHELF. TYPE: CARGO 5000 MANUFACTURER: ZAMBELLI METALLTECHNIK GMBH & CO.KG MAX. LOAD CAPACITY: 500 KG MAX. TOTAL LOAD: 14,000 KG NOMINAL POWER: 2 X 3,0 KW A VISIT IS POSSIBLE AFTER AGREEMENT AT ANY TIME. THE TOUR CAN BE DONE IN AN OPERABLE STATE. OUR SISTER COMPANY IS A MANUFACTURER. THUS, THE REMOVAL (DISASSEMBLY AND RE-ASSEMBLY), AS WELL AS DIV. SERVICES CAN BE CONVEYED. A SELF REMOVAL IS POSSIBLE.
Vendedor: Zambelli Fertigungs GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 35.950 €
Ubicación: Land-weight approx.: 3800 kg<br/>dimensions (l x w x h) approx.: 2300 x 2300 x 2300 mm<br/>description: charmilles robofil 2050 tw wire edm machine<br> <br> operating hours approx. 15603 h<br> travels x, y, z = 320 x 220 x 160 mm, travels u, w = +/,- 48 m, traction angle 30/60 °/mm<br> measuring accuracy 0. 05 µm<br> feed speed 1-900 mm/min<br> tapped hole in tw mode 1. wire +- 30°, max. tap hole in tw mode 2. wire +- 30t, cooling water tank approx. 800 l<br> working area approx. 1000 x 490 x 260 mm, max. loading the pallet 500 kg, plate size 600 x 430 mm<br> control: manufacturer fanuc<br> software, manufacturer gf, type cnc orange software 1. 5. 4<br> machine is sold with various accessories, cutting wire and spare parts, see detail pictures<br> last service: 2018<br> ce certificate available<br> <b>machine is sold without cooling water unit</b> WEIGHT APPROX.: 3800 KG
DIMENSIONS (L X W X H) APPROX.: 2300 X 2300 X 2300 MM
DESCRIPTION: CHARMILLES ROBOFIL 2050 TW WIRE EDM MACHINE

OPERATING HOURS APPROX. 15603 H
TRAVELS X, Y, Z = 320 X 220 X 160 MM, TRAVELS U, W = +/,- 48 M, TRACTION ANGLE 30/60 °/MM
MEASURING ACCURACY 0. 05 µM
FEED SPEED 1-900 MM/MIN
TAPPED HOLE IN TW MODE 1. WIRE +- 30°, MAX. TAP HOLE IN TW MODE 2. WIRE +- 30T, COOLING WATER TANK APPROX. 800 L
WORKING AREA APPROX. 1000 X 490 X 260 MM, MAX. LOADING THE PALLET 500 KG, PLATE SIZE 600 X 430 MM
CONTROL: MANUFACTURER FANUC
SOFTWARE, MANUFACTURER GF, TYPE CNC ORANGE SOFTWARE 1. 5. 4
MACHINE IS SOLD WITH VARIOUS ACCESSORIES, CUTTING WIRE AND SPARE PARTS, SEE DETAIL PICTURES
LAST SERVICE: 2018
CE CERTIFICATE AVAILABLE
MACHINE IS SOLD WITHOUT COOLING WATER UNIT
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-we sell a used paternoster circular shelf.

type: cargo 5001
manufacturer: zambelli
max. load capacity: 500 kg
max. total load: 10,500 kg
nominal power: 4,5 kw

a visit is possible after agreement at any time. the tour can be done in an operable state.

our sister company is a manufacturer. thus, the removal (disassembly and re-assembly), as well as div. services can be conveyed.
a self removal is possible.  WE SELL A USED PATERNOSTER CIRCULAR SHELF. TYPE: CARGO 5001 MANUFACTURER: ZAMBELLI MAX. LOAD CAPACITY: 500 KG MAX. TOTAL LOAD: 10,500 KG NOMINAL POWER: 4,5 KW A VISIT IS POSSIBLE AFTER AGREEMENT AT ANY TIME. THE TOUR CAN BE DONE IN AN OPERABLE STATE. OUR SISTER COMPANY IS A MANUFACTURER. THUS, THE REMOVAL (DISASSEMBLY AND RE-ASSEMBLY), AS WELL AS DIV. SERVICES CAN BE CONVEYED. A SELF REMOVAL IS POSSIBLE.
Vendedor: Zambelli Fertigungs GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 350 €
Ubicación: Land-weight approx.: 90 kg<br/>dimensions (l x w x h) approx.: 300 x 580 x 420 mm<br/>description: diameter of the test rod 50 mm, height of the standard test rod 50 mm, max. specific pressure 5 mpa, max. piston stroke 95 mm, thickening range 20 to 80 %, thickening speed 14 +/- 1 mm/s, oil reservoir volume 4.2 dm³, with various accessories WEIGHT APPROX.: 90 KG
DIMENSIONS (L X W X H) APPROX.: 300 X 580 X 420 MM
DESCRIPTION: DIAMETER OF THE TEST ROD 50 MM, HEIGHT OF THE STANDARD TEST ROD 50 MM, MAX. SPECIFIC PRESSURE 5 MPA, MAX. PISTON STROKE 95 MM, THICKENING RANGE 20 TO 80 %, THICKENING SPEED 14 +/- 1 MM/S, OIL RESERVOIR VOLUME 4.2 DM³, WITH VARIOUS ACCESSORIES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-travel in x 850 mm
travel in y: 330 mm
travel in z 440 mm
table size: 1240 x 335 mm
tool holder: sk 40
speed range: 56-2800 rpm
total power: 4 kw / 400 v
machine weight: 2000 kg

equipment / accessories:

3 axis digital display with screen
adjustable hand control panel
horizontal milling equipment
1 lg. milling
5 tool holder sk 40
coolant system
pivotable milling head with drilling tailstock
documentation

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
anyone can test the machine before making a purchase in our factory under power.
 TRAVEL IN X 850 MM TRAVEL IN Y: 330 MM TRAVEL IN Z 440 MM TABLE SIZE: 1240 X 335 MM TOOL HOLDER: SK 40 SPEED RANGE: 56-2800 RPM TOTAL POWER: 4 KW / 400 V MACHINE WEIGHT: 2000 KG EQUIPMENT / ACCESSORIES: 3 AXIS DIGITAL DISPLAY WITH SCREEN ADJUSTABLE HAND CONTROL PANEL HORIZONTAL MILLING EQUIPMENT 1 LG. MILLING 5 TOOL HOLDER SK 40 COOLANT SYSTEM PIVOTABLE MILLING HEAD WITH DRILLING TAILSTOCK DOCUMENTATION ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. ANYONE CAN TEST THE MACHINE BEFORE MAKING A PURCHASE IN OUR FACTORY UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Precio: used machinery auction RESALE 950 €
Ubicación: Land-weight approx.: 600 kg<br/>dimensions (l x w x h) approx.: 1600 x 1200 x 1800 mm<br/>description: capacity 2000 kg, ladle number 6, order number 4868 WEIGHT APPROX.: 600 KG
DIMENSIONS (L X W X H) APPROX.: 1600 X 1200 X 1800 MM
DESCRIPTION: CAPACITY 2000 KG, LADLE NUMBER 6, ORDER NUMBER 4868
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 50.000 €
Ubicación: Land-laser cutting machine with automatic warehouse system
manufacturer amada; model lc-3015 xi-nt; year 2007; no. serial 20510134
observations
max: 4.000w; area max. work: 3.000 x 1 500 mm; laser total hours: 61.850 hrs. it includes automatic warehouse amada; type: aslul-300 - xi (2007), serial no.: 1361; unit capacity: 3. 000kgrs. storage weight: 11. 000kgrs; 15kw; 400v, 50 hz; 40a.
LASER CUTTING MACHINE WITH AUTOMATIC WAREHOUSE SYSTEM MANUFACTURER AMADA; MODEL LC-3015 XI-NT; YEAR 2007; NO. SERIAL 20510134 OBSERVATIONS MAX: 4.000W; AREA MAX. WORK: 3.000 X 1 500 MM; LASER TOTAL HOURS: 61.850 HRS. IT INCLUDES AUTOMATIC WAREHOUSE AMADA; TYPE: ASLUL-300 - XI (2007), SERIAL NO.: 1361; UNIT CAPACITY: 3. 000KGRS. STORAGE WEIGHT: 11. 000KGRS; 15KW; 400V, 50 HZ; 40A.
Vendedor: Gutinvest International Assets
Año de construcción: usado
Precio: used machinery auction RESALE 760 €
Ubicación: Land-weight approx.: 400 kg<br/>dimensions (l x w x h) approx.: 1500 x 1000 x 1600 mm<br/>description: capacity 650 kg, ladle number 5 WEIGHT APPROX.: 400 KG
DIMENSIONS (L X W X H) APPROX.: 1500 X 1000 X 1600 MM
DESCRIPTION: CAPACITY 650 KG, LADLE NUMBER 5
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 40.000 €
Ubicación: Land-amada manufacturer; model lc 3015 xi-nt; year 2006; nº 1-030 x series
observations
power: 4. 000w; area max. work: 3.000 x 1 500x20mm; laser total hours: 55.830 pm... AMADA MANUFACTURER; MODEL LC 3015 XI-NT; YEAR 2006; Nº 1-030 X SERIES OBSERVATIONS POWER: 4. 000W; AREA MAX. WORK: 3.000 X 1 500X20MM; LASER TOTAL HOURS: 55.830 PM...
Vendedor: Gutinvest International Assets
Año de construcción: usado
Precio: used machinery auction RESALE 760 €
Ubicación: Land-weight approx.: 500 kg<br/>dimensions (l x w x h) approx.: 1700 x 1000 x 2000 mm<br/>description: capacity 1800 kg, ladle number 6, order number 6997 WEIGHT APPROX.: 500 KG
DIMENSIONS (L X W X H) APPROX.: 1700 X 1000 X 2000 MM
DESCRIPTION: CAPACITY 1800 KG, LADLE NUMBER 6, ORDER NUMBER 6997
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-ideal csr typ. 201 - 21
wire mesh production line csr 
project jig welding machine
year of manufacture 1996
switch / control cabinet
kva125
made in germany 
control: w/siemens handheld computer control
mounted in enclosed wire cage safety structure 
the coordinate welding machine csr 201 is used for resisting point welding of sheet metal and wire products in stencils:
work-piece dimensions:
length max.1800 mm
width max. 750 mm
nldw7
height max. 200 mm

x-axis for driving the welding unit according to the work piece length, with a base frame, hardened liner guides, serrated toothed rack system and servomotor with incremental encoder, travel max. 1800mm programmable, max. travel speed 1500 mm / s positioning accuracy +/- 0.2mm
y axis
for driving the welding unit according to work piece width, with hardened linear guides, rack system and rotary servo motor with incremental encoder, travel max. 750 mm programmable, max. driving speed 1500mm / s positioning accuracy +/- 0.2mm
c console
for holding the welding cylinder, size 750mm
welding cylinder lower pneumatic cylinder: electrode force 5900n (5bar) stroke 0-50 mm, with mechanical stroke adjustment upper pneumatic cylinder: electrode force 5.900n (5bar), total stroke 210mm
versaweld  IDEAL CSR TYP. 201 - 21 WIRE MESH PRODUCTION LINE CSR PROJECT JIG WELDING MACHINE YEAR OF MANUFACTURE 1996 SWITCH / CONTROL CABINET KVA125 MADE IN GERMANY CONTROL: W/SIEMENS HANDHELD COMPUTER CONTROL MOUNTED IN ENCLOSED WIRE CAGE SAFETY STRUCTURE THE COORDINATE WELDING MACHINE CSR 201 IS USED FOR RESISTING POINT WELDING OF SHEET METAL AND WIRE PRODUCTS IN STENCILS: WORK-PIECE DIMENSIONS: LENGTH MAX.1800 MM WIDTH MAX. 750 MM NLDW7 HEIGHT MAX. 200 MM X-AXIS FOR DRIVING THE WELDING UNIT ACCORDING TO THE WORK PIECE LENGTH, WITH A BASE FRAME, HARDENED LINER GUIDES, SERRATED TOOTHED RACK SYSTEM AND SERVOMOTOR WITH INCREMENTAL ENCODER, TRAVEL MAX. 1800MM PROGRAMMABLE, MAX. TRAVEL SPEED 1500 MM / S POSITIONING ACCURACY +/- 0.2MM Y AXIS FOR DRIVING THE WELDING UNIT ACCORDING TO WORK PIECE WIDTH, WITH HARDENED LINEAR GUIDES, RACK SYSTEM AND ROTARY SERVO MOTOR WITH INCREMENTAL ENCODER, TRAVEL MAX. 750 MM PROGRAMMABLE, MAX. DRIVING SPEED 1500MM / S POSITIONING ACCURACY +/- 0.2MM C CONSOLE FOR HOLDING THE WELDING CYLINDER, SIZE 750MM WELDING CYLINDER LOWER PNEUMATIC CYLINDER: ELECTRODE FORCE 5900N (5BAR) STROKE 0-50 MM, WITH MECHANICAL STROKE ADJUSTMENT UPPER PNEUMATIC CYLINDER: ELECTRODE FORCE 5.900N (5BAR), TOTAL STROKE 210MM VERSAWELD
Vendedor: Silicon plus
Año de construcción: usado
Precio: used machinery auction RESALE 890 €
Ubicación: Land-weight approx.: 1000 kg<br/>dimensions (l x w x h) approx.: 2100 x 1200 x 2000 mm<br/>description: capacity 3000 kg, order number 8632 WEIGHT APPROX.: 1000 KG
DIMENSIONS (L X W X H) APPROX.: 2100 X 1200 X 2000 MM
DESCRIPTION: CAPACITY 3000 KG, ORDER NUMBER 8632
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-spot & projection welding machine
posiweld by schlatter 
model: orion megaflex 3
with nc controlled x and y axes
+ machine positioning system y
+ rotary indexing table with 2 positions
+ siemens control cabinet
made in switzerland
year 2002
ce norm
power rating max.214kwa
working pressure 5.5bar
belh2f0rgq
axes:
x-1600mm
y-700mm
z1-250mm
z2-120mm
c1-c2 from 0-180°
all axes are driven by ac servomotors
machines are now located in winterlingen/germany
it is from running production.
on stock also 2 ideal mesh welders:
ideal csr 201 project welding machine year 1996
ideal mesh welder pgs 140-12 year 1995  SPOT & PROJECTION WELDING MACHINE POSIWELD BY SCHLATTER MODEL: ORION MEGAFLEX 3 WITH NC CONTROLLED X AND Y AXES + MACHINE POSITIONING SYSTEM Y + ROTARY INDEXING TABLE WITH 2 POSITIONS + SIEMENS CONTROL CABINET MADE IN SWITZERLAND YEAR 2002 CE NORM POWER RATING MAX.214KWA WORKING PRESSURE 5.5BAR BELH2F0RGQ AXES: X-1600MM Y-700MM Z1-250MM Z2-120MM C1-C2 FROM 0-180° ALL AXES ARE DRIVEN BY AC SERVOMOTORS MACHINES ARE NOW LOCATED IN WINTERLINGEN/GERMANY IT IS FROM RUNNING PRODUCTION. ON STOCK ALSO 2 IDEAL MESH WELDERS: IDEAL CSR 201 PROJECT WELDING MACHINE YEAR 1996 IDEAL MESH WELDER PGS 140-12 YEAR 1995
Vendedor: Silicon plus
Año de construcción: usado
Precio: used machinery auction RESALE 25 €
Ubicación: Land-weight approx.: 8 kg<br/>dimensions (l x w x h) approx.: 560 x 300 x 230 mm<br/>description: absorbed power 2000 w. no-load speed 15000 /min. cutting depth 0-3.5 mm. total cut width 110 mm. rebate´s depth 16 mm<br> certified delivery by parcel service to the buyers address on the peninsula. for other destinations, ask for prices WEIGHT APPROX.: 8 KG
DIMENSIONS (L X W X H) APPROX.: 560 X 300 X 230 MM
DESCRIPTION: ABSORBED POWER 2000 W. NO-LOAD SPEED 15000 /MIN. CUTTING DEPTH 0-3.5 MM. TOTAL CUT WIDTH 110 MM. REBATE´S DEPTH 16 MM
CERTIFIED DELIVERY BY PARCEL SERVICE TO THE BUYERS ADDRESS ON THE PENINSULA. FOR OTHER DESTINATIONS, ASK FOR PRICES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-year built: approx 1980
blade length: 300 mm
cutting width: 290 mm
gr. material thickness: 80 x 10 mm
machine weight: 250 kg

equipment / accessories
pneumatic release for continuous operation
foot switch
machine base

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
each party has the opportunity to test the snips in advance under power.
 YEAR BUILT: APPROX 1980 BLADE LENGTH: 300 MM CUTTING WIDTH: 290 MM GR. MATERIAL THICKNESS: 80 X 10 MM MACHINE WEIGHT: 250 KG EQUIPMENT / ACCESSORIES PNEUMATIC RELEASE FOR CONTINUOUS OPERATION FOOT SWITCH MACHINE BASE ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EACH PARTY HAS THE OPPORTUNITY TO TEST THE SNIPS IN ADVANCE UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Precio: used machinery auction RESALE 10 €
Ubicación: Land-weight approx.: 3 kg<br/>dimensions (l x w x h) approx.: 320 x 240 x 100 mm<br/>description: cutting capacity wood 85 mm. cutting capacity light alloy 20 mm. cutting capacity steel 8 mm. inclined cuts up to +/-45º. voltage and current 220-240 v/3a. frequency 50-60 hz. absorbed power 701 w. strokes per minute 300-3000<br> certified delivery by parcel service to the buyers address on the peninsula. for other destinations, ask for prices WEIGHT APPROX.: 3 KG
DIMENSIONS (L X W X H) APPROX.: 320 X 240 X 100 MM
DESCRIPTION: CUTTING CAPACITY WOOD 85 MM. CUTTING CAPACITY LIGHT ALLOY 20 MM. CUTTING CAPACITY STEEL 8 MM. INCLINED CUTS UP TO +/-45º. VOLTAGE AND CURRENT 220-240 V/3A. FREQUENCY 50-60 HZ. ABSORBED POWER 701 W. STROKES PER MINUTE 300-3000
CERTIFIED DELIVERY BY PARCEL SERVICE TO THE BUYERS ADDRESS ON THE PENINSULA. FOR OTHER DESTINATIONS, ASK FOR PRICES
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 225.000 €
Ubicación: Land-autom. shelf stock or akl, 7.584 shelf plots, 250 kg load capacity, tablarmaã?e 1.230 mm x 620 mm x 150 mm / 250 mm - used -:
 
price from site: â?¬225.000.-(net) plus montages etc.!
 
 
2-g shelf warehouse with just deep storage and conveyor systems for the connection of 2 jobs
 
manufacturer: tgw, a-4600 wels
type: shelf storage
year of construction / operation: 07.2007
 description:
â·         length of the streets: ca 51m
â·         height of the shelves: ca 9, 3 m
â·         sprinkler system: no
 stacker cranes
o number: 2
o type: stratus, lifting: spectra
 rack system
o number shelf location: 7.584
specialist load: 250 kg
o shelves:
⧠number of shelves: 5.280 pcs., galvanized steel (2mmm), smooth ground on 2 opposite sides with bar code tags
⧠dimensions: 1.230mm x 620mm x 150mm / 250mm
⧠sektorierung of the shelves possible
â·         conveyor: 1 cross reverse thrust car of the two streets and two jobs connects
â·         number of jobs: 2 - concurrent use of paging possible /
â·         system performance:
o rack serving unit: based on 76 and paging / h in the double play
 condition: good
available: from approximately april 2020!
location: austria
 
more photos on request! AUTOM. SHELF STOCK OR AKL, 7.584 SHELF PLOTS, 250 KG LOAD CAPACITY, TABLARMA&ATILDE;?E 1.230 MM X 620 MM X 150 MM / 250 MM - USED -: PRICE FROM SITE: &ACIRC;?&NOT;225.000.-(NET) PLUS MONTAGES ETC.! 2-G SHELF WAREHOUSE WITH JUST DEEP STORAGE AND CONVEYOR SYSTEMS FOR THE CONNECTION OF 2 JOBS MANUFACTURER: TGW, A-4600 WELS TYPE: SHELF STORAGE YEAR OF CONSTRUCTION / OPERATION: 07.2007 DESCRIPTION: &ACIRC;&MIDDOT; LENGTH OF THE STREETS: CA 51M &ACIRC;&MIDDOT; HEIGHT OF THE SHELVES: CA 9, 3 M &ACIRC;&MIDDOT; SPRINKLER SYSTEM: NO STACKER CRANES O NUMBER: 2 O TYPE: STRATUS, LIFTING: SPECTRA RACK SYSTEM O NUMBER SHELF LOCATION: 7.584 SPECIALIST LOAD: 250 KG O SHELVES: &ACIRC;&SECT; NUMBER OF SHELVES: 5.280 PCS., GALVANIZED STEEL (2MMM), SMOOTH GROUND ON 2 OPPOSITE SIDES WITH BAR CODE TAGS &ACIRC;&SECT; DIMENSIONS: 1.230MM X 620MM X 150MM / 250MM &ACIRC;&SECT; SEKTORIERUNG OF THE SHELVES POSSIBLE &ACIRC;&MIDDOT; CONVEYOR: 1 CROSS REVERSE THRUST CAR OF THE TWO STREETS AND TWO JOBS CONNECTS &ACIRC;&MIDDOT; NUMBER OF JOBS: 2 - CONCURRENT USE OF PAGING POSSIBLE / &ACIRC;&MIDDOT; SYSTEM PERFORMANCE: O RACK SERVING UNIT: BASED ON 76 AND PAGING / H IN THE DOUBLE PLAY CONDITION: GOOD AVAILABLE: FROM APPROXIMATELY APRIL 2020! LOCATION: AUSTRIA MORE PHOTOS ON REQUEST!
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Precio: used machinery auction RESALE 10 €
Ubicación: Land-weight approx.: 3 kg<br/>dimensions (l x w x h) approx.: 320 x 240 x 100 mm<br/>description: cutting capacity wood 85 mm. cutting capacity light alloy 20 mm. cutting capacity steel 8 mm. inclined cuts up to +/-45º. voltage and current 220-240 v/3a. frequency 50-60 hz. absorbed power 701 w. strokes per minute 300-3000<br> certified delivery by parcel service to the buyers address on the peninsula. for other destinations, ask for prices WEIGHT APPROX.: 3 KG
DIMENSIONS (L X W X H) APPROX.: 320 X 240 X 100 MM
DESCRIPTION: CUTTING CAPACITY WOOD 85 MM. CUTTING CAPACITY LIGHT ALLOY 20 MM. CUTTING CAPACITY STEEL 8 MM. INCLINED CUTS UP TO +/-45º. VOLTAGE AND CURRENT 220-240 V/3A. FREQUENCY 50-60 HZ. ABSORBED POWER 701 W. STROKES PER MINUTE 300-3000
CERTIFIED DELIVERY BY PARCEL SERVICE TO THE BUYERS ADDRESS ON THE PENINSULA. FOR OTHER DESTINATIONS, ASK FOR PRICES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-3000 x 1500 mm with pallet changer, byloader, updated monitor,
cooler, filter, 5 + 7, 5 cutting head, sick light barrier, on time 63973, cutting time 31200, turbo and glass revision at cutting time 22787 hours.
in really good condition, working in production, can be delivered august 2019, service made in march 2019 
 3000 X 1500 MM WITH PALLET CHANGER, BYLOADER, UPDATED MONITOR, COOLER, FILTER, 5 + 7, 5 CUTTING HEAD, SICK LIGHT BARRIER, ON TIME 63973, CUTTING TIME 31200, TURBO AND GLASS REVISION AT CUTTING TIME 22787 HOURS. IN REALLY GOOD CONDITION, WORKING IN PRODUCTION, CAN BE DELIVERED AUGUST 2019, SERVICE MADE IN MARCH 2019
Vendedor: K N Machinery
Año de construcción: usado
Precio: used machinery auction RESALE 10 €
Ubicación: Land-weight approx.: 3 kg<br/>dimensions (l x w x h) approx.: 320 x 240 x 100 mm<br/>description: cutting capacity wood 85 mm. cutting capacity light alloy 20 mm. cutting capacity steel 8 mm. inclined cuts up to +/-45º. voltage and current 220-240 v/3a. frequency 50-60 hz. absorbed power 701 w. strokes per minute 300-3000<br> certified delivery by parcel service to the buyers address on the peninsula. for other destinations, ask for prices WEIGHT APPROX.: 3 KG
DIMENSIONS (L X W X H) APPROX.: 320 X 240 X 100 MM
DESCRIPTION: CUTTING CAPACITY WOOD 85 MM. CUTTING CAPACITY LIGHT ALLOY 20 MM. CUTTING CAPACITY STEEL 8 MM. INCLINED CUTS UP TO +/-45º. VOLTAGE AND CURRENT 220-240 V/3A. FREQUENCY 50-60 HZ. ABSORBED POWER 701 W. STROKES PER MINUTE 300-3000
CERTIFIED DELIVERY BY PARCEL SERVICE TO THE BUYERS ADDRESS ON THE PENINSULA. FOR OTHER DESTINATIONS, ASK FOR PRICES
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 4.550 €
Ubicación: Land-screw compressor  kaeser cs121 
screw exchange - 2014 
compressor after service

technical data:

capacity: 12,00 m3/min (12000l/min);
engine: 75 kw;
pressure: 8 bar;
year: 2000
working hours: 14745h  SCREW COMPRESSOR KAESER CS121 SCREW EXCHANGE - 2014 COMPRESSOR AFTER SERVICE TECHNICAL DATA: CAPACITY: 12,00 M3/MIN (12000L/MIN); ENGINE: 75 KW; PRESSURE: 8 BAR; YEAR: 2000 WORKING HOURS: 14745H
Vendedor: P.H.U. Airspaw
Año de construcción: usado
Precio: used machinery auction RESALE 10 €
Ubicación: Land-weight approx.: 3 kg<br/>dimensions (l x w x h) approx.: 320 x 240 x 100 mm<br/>description: cutting capacity wood 85 mm. cutting capacity light alloy 20 mm. cutting capacity steel 8 mm. inclined cuts up to +/-45º. voltage and current 220-240 v/3a. frequency 50-60 hz. absorbed power 701 w. strokes per minute 300-3000<br> certified delivery by parcel service to the buyers address on the peninsula. for other destinations, ask for prices WEIGHT APPROX.: 3 KG
DIMENSIONS (L X W X H) APPROX.: 320 X 240 X 100 MM
DESCRIPTION: CUTTING CAPACITY WOOD 85 MM. CUTTING CAPACITY LIGHT ALLOY 20 MM. CUTTING CAPACITY STEEL 8 MM. INCLINED CUTS UP TO +/-45º. VOLTAGE AND CURRENT 220-240 V/3A. FREQUENCY 50-60 HZ. ABSORBED POWER 701 W. STROKES PER MINUTE 300-3000
CERTIFIED DELIVERY BY PARCEL SERVICE TO THE BUYERS ADDRESS ON THE PENINSULA. FOR OTHER DESTINATIONS, ASK FOR PRICES
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 1.990 €
Ubicación: Land-table saw ortza se-150 t sliding table 1600 mm
schiebetischanschlag disassembled
with suva protection
saw blades up to 45 â° degree angle-adjustable
subsequently mounted special stop vintage 2003 bã¶sch bazenheid
total size: 1600 x 1250 mm x 1700 mm
weight approx. 770 kg
built in 1974

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12        TABLE SAW ORTZA SE-150 T SLIDING TABLE 1600 MM SCHIEBETISCHANSCHLAG DISASSEMBLED WITH SUVA PROTECTION SAW BLADES UP TO 45 &ACIRC;&DEG; DEGREE ANGLE-ADJUSTABLE SUBSEQUENTLY MOUNTED SPECIAL STOP VINTAGE 2003 B&ATILDE;&PARA;SCH BAZENHEID TOTAL SIZE: 1600 X 1250 MM X 1700 MM WEIGHT APPROX. 770 KG BUILT IN 1974 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 10 €
Ubicación: Land-weight approx.: 3 kg<br/>dimensions (l x w x h) approx.: 320 x 240 x 100 mm<br/>description: cutting capacity wood 85 mm. cutting capacity light alloy 20 mm. cutting capacity steel 8 mm. inclined cuts up to +/-45º. voltage and current 220-240 v/3a. frequency 50-60 hz. absorbed power 701 w. strokes per minute 300-3000<br> certified delivery by parcel service to the buyers address on the peninsula. for other destinations, ask for prices WEIGHT APPROX.: 3 KG
DIMENSIONS (L X W X H) APPROX.: 320 X 240 X 100 MM
DESCRIPTION: CUTTING CAPACITY WOOD 85 MM. CUTTING CAPACITY LIGHT ALLOY 20 MM. CUTTING CAPACITY STEEL 8 MM. INCLINED CUTS UP TO +/-45º. VOLTAGE AND CURRENT 220-240 V/3A. FREQUENCY 50-60 HZ. ABSORBED POWER 701 W. STROKES PER MINUTE 300-3000
CERTIFIED DELIVERY BY PARCEL SERVICE TO THE BUYERS ADDRESS ON THE PENINSULA. FOR OTHER DESTINATIONS, ASK FOR PRICES
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 1.490 €
Ubicación: Land-kehl machine / milling machine rex

with suva protection
machine wheels
length: 1100 mm, width 950 mm, height 1900 mm
weight approx. 580 kg
year of construction 1983

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12        KEHL MACHINE / MILLING MACHINE REX WITH SUVA PROTECTION MACHINE WHEELS LENGTH: 1100 MM, WIDTH 950 MM, HEIGHT 1900 MM WEIGHT APPROX. 580 KG YEAR OF CONSTRUCTION 1983 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 25 €
Ubicación: Land-weight approx.: 8 kg<br/>dimensions (l x w x h) approx.: 560 x 300 x 230 mm<br/>description: absorbed power 2000 w. no-load speed 15000 /min. cutting depth 0-3.5 mm. total cut width 110 mm. rebate´s depth 16 mm<br> certified delivery by parcel service to the buyers address on the peninsula. for other destinations, ask for prices WEIGHT APPROX.: 8 KG
DIMENSIONS (L X W X H) APPROX.: 560 X 300 X 230 MM
DESCRIPTION: ABSORBED POWER 2000 W. NO-LOAD SPEED 15000 /MIN. CUTTING DEPTH 0-3.5 MM. TOTAL CUT WIDTH 110 MM. REBATE´S DEPTH 16 MM
CERTIFIED DELIVERY BY PARCEL SERVICE TO THE BUYERS ADDRESS ON THE PENINSULA. FOR OTHER DESTINATIONS, ASK FOR PRICES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-year of construction: approx. 1985
maximum schweiã?lstg.: 500 amps.
machine weight: approx. 500 kg

equipment / accessories:

incl. water cooled torch
external wire feeder knife griesheim dvb 1
water cooling

all specifications were created after bestm knowledge and existing documents; expressly reserved by mistake.
every interested party can advance test under power the protective gas welding machine.
 YEAR OF CONSTRUCTION: APPROX. 1985 MAXIMUM SCHWEI&ATILDE;?LSTG.: 500 AMPS. MACHINE WEIGHT: APPROX. 500 KG EQUIPMENT / ACCESSORIES: INCL. WATER COOLED TORCH EXTERNAL WIRE FEEDER KNIFE GRIESHEIM DVB 1 WATER COOLING ALL SPECIFICATIONS WERE CREATED AFTER BESTM KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EVERY INTERESTED PARTY CAN ADVANCE TEST UNDER POWER THE PROTECTIVE GAS WELDING MACHINE.
Vendedor: Czech Industrie Service
Año de construcción: usado
Precio: used machinery auction RESALE 25 €
Ubicación: Land-weight approx.: 8 kg<br/>dimensions (l x w x h) approx.: 560 x 300 x 230 mm<br/>description: absorbed power 2000 w. no-load speed 15000 /min. cutting depth 0-3.5 mm. total cut width 110 mm. rebate´s depth 16 mm<br> certified delivery by parcel service to the buyers address on the peninsula. for other destinations, ask for prices WEIGHT APPROX.: 8 KG
DIMENSIONS (L X W X H) APPROX.: 560 X 300 X 230 MM
DESCRIPTION: ABSORBED POWER 2000 W. NO-LOAD SPEED 15000 /MIN. CUTTING DEPTH 0-3.5 MM. TOTAL CUT WIDTH 110 MM. REBATE´S DEPTH 16 MM
CERTIFIED DELIVERY BY PARCEL SERVICE TO THE BUYERS ADDRESS ON THE PENINSULA. FOR OTHER DESTINATIONS, ASK FOR PRICES
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 26.704 €
Ubicación: Land-we offer reconditioned peri trio elements 125,06 mâ² with 45% discount
frames, frame with zinc phosphate color primed and painted. new scarf skin

14 element tr 270 x 240
4 element tr 270 x 90
6 element tr 270 x 72
6 element tr 270 x 60
4 element tr 270 x 30

net price: 26704,15eur

also subsets possible / reserved sales

and sale of scaffolding and formwork systems construction machinery; restoration of formwork for a fair price.
sfs master operating company
andreas becker e. kfm., tel. 07305/9562350, fax. 07305/9562352,
mobile: 0049 176 70044689 mr. becker
ust-id-nr: de279047055

office / warehouse address: birch street 15

89185 hã¼ttisheim of humlangen-

registry court ulm: hra722943
 WE OFFER RECONDITIONED PERI TRIO ELEMENTS 125,06 M&ACIRC;&SUP2; WITH 45% DISCOUNT FRAMES, FRAME WITH ZINC PHOSPHATE COLOR PRIMED AND PAINTED. NEW SCARF SKIN 14 ELEMENT TR 270 X 240 4 ELEMENT TR 270 X 90 6 ELEMENT TR 270 X 72 6 ELEMENT TR 270 X 60 4 ELEMENT TR 270 X 30 NET PRICE: 26704,15EUR ALSO SUBSETS POSSIBLE / RESERVED SALES AND SALE OF SCAFFOLDING AND FORMWORK SYSTEMS CONSTRUCTION MACHINERY; RESTORATION OF FORMWORK FOR A FAIR PRICE. SFS MASTER OPERATING COMPANY ANDREAS BECKER E. KFM., TEL. 07305/9562350, FAX. 07305/9562352, MOBILE: 0049 176 70044689 MR. BECKER UST-ID-NR: DE279047055 OFFICE / WAREHOUSE ADDRESS: BIRCH STREET 15 89185 H&ATILDE;&FRAC14;TTISHEIM OF HUMLANGEN- REGISTRY COURT ULM: HRA722943
Vendedor: SFS Andreas Becker e.Kfm.
Año de construcción: usado
Precio: used machinery auction RESALE 39.000 €
Ubicación: Land-weight approx.: 2500 kg<br/>pressure: 20 to<br/>dimensions (l x w x h) approx.: 1550 x 1800 x 1965 mm<br/>description: <b>this is a demonstration machine in stock!</b><br> ergonomic press brake made of a rigid monoblock frame (mehaanite 700 n/mm²)<br> the machine has a direct drive via servo motor and ball screw which works on tension to avoid deformation.<br> in addition, the machine is equipped with a 6-axis backgauge, a teda quick tool clamp and an iris rapid bend safety device<br> <br> - serial number: fx85610002580<br> - bending capacity: 200 kn<br> - usable bending length: 850 mm<br> - y-axis travel stroke: 1956 mm<br> - y-axis speed: 200 mm/sec<br> - installation height(table to upper bending beam): 470 (395) mm<br> - x axis travel stroke (6 axes x1-x2-r1-r2-z1-z2): 375 mm<br> - r axis travel stroke (6 axes x1-x2-r1-r2-z1-z2: 180 mm<br> - z axis speed (6 axes x1-x2-r1-r2-z1-z2): 744 mm/sec<br> - x axis velocity (6 axes x1-x2-r1-r2-z1-z2): 1000 mm/sec<br> - r axis speed (6 axes x1-x2-r1-r2-z1-z2): 350 mm/sec<br> - z axis speed (6 axes x1-x2-r1-r2-z1-z2): 220 mm/sec<br> - wireless connection / wireless / usb-port: yes / 2<br> - main motor power: 1x5,2 kw<br> - connection power: 5 kwa<br> <br> <b>accessories:</b><br> - top promecam tool holder (without tools) with quick-release lever<br> - below tool holder for amada / promecam and wila plug-in matrices<br> - cnc control panasonic toughbook incl. battery, usb connection and wifi<br> - anti-reflective lcd touchscreen<br> - safety device dual laser<br> - rigid mehaanite monoblock cast iron body tensile strength 700n/mm²<br> - direct drive via servo motor and recirculating ball screw<br> - 2-axle backgauge moves<br> - ergonomic design<br> <br> <b>special accessories:</b><br> teda speed grip quick-change system top, for standard amada/promecam tools<br> 6 axes backgauge x1/x2/r1/r2/z1/z2<br> iris rapid bend, safety device, travels at rapid traverse to the mute point<br> <br> the machine can be transported by forkl WEIGHT APPROX.: 2500 KG
PRESSURE: 20 TO
DIMENSIONS (L X W X H) APPROX.: 1550 X 1800 X 1965 MM
DESCRIPTION: THIS IS A DEMONSTRATION MACHINE IN STOCK!
ERGONOMIC PRESS BRAKE MADE OF A RIGID MONOBLOCK FRAME (MEHAANITE 700 N/MM²)
THE MACHINE HAS A DIRECT DRIVE VIA SERVO MOTOR AND BALL SCREW WHICH WORKS ON TENSION TO AVOID DEFORMATION.
IN ADDITION, THE MACHINE IS EQUIPPED WITH A 6-AXIS BACKGAUGE, A TEDA QUICK TOOL CLAMP AND AN IRIS RAPID BEND SAFETY DEVICE

- SERIAL NUMBER: FX85610002580
- BENDING CAPACITY: 200 KN
- USABLE BENDING LENGTH: 850 MM
- Y-AXIS TRAVEL STROKE: 1956 MM
- Y-AXIS SPEED: 200 MM/SEC
- INSTALLATION HEIGHT(TABLE TO UPPER BENDING BEAM): 470 (395) MM
- X AXIS TRAVEL STROKE (6 AXES X1-X2-R1-R2-Z1-Z2): 375 MM
- R AXIS TRAVEL STROKE (6 AXES X1-X2-R1-R2-Z1-Z2: 180 MM
- Z AXIS SPEED (6 AXES X1-X2-R1-R2-Z1-Z2): 744 MM/SEC
- X AXIS VELOCITY (6 AXES X1-X2-R1-R2-Z1-Z2): 1000 MM/SEC
- R AXIS SPEED (6 AXES X1-X2-R1-R2-Z1-Z2): 350 MM/SEC
- Z AXIS SPEED (6 AXES X1-X2-R1-R2-Z1-Z2): 220 MM/SEC
- WIRELESS CONNECTION / WIRELESS / USB-PORT: YES / 2
- MAIN MOTOR POWER: 1X5,2 KW
- CONNECTION POWER: 5 KWA

ACCESSORIES:
- TOP PROMECAM TOOL HOLDER (WITHOUT TOOLS) WITH QUICK-RELEASE LEVER
- BELOW TOOL HOLDER FOR AMADA / PROMECAM AND WILA PLUG-IN MATRICES
- CNC CONTROL PANASONIC TOUGHBOOK INCL. BATTERY, USB CONNECTION AND WIFI
- ANTI-REFLECTIVE LCD TOUCHSCREEN
- SAFETY DEVICE DUAL LASER
- RIGID MEHAANITE MONOBLOCK CAST IRON BODY TENSILE STRENGTH 700N/MM²
- DIRECT DRIVE VIA SERVO MOTOR AND RECIRCULATING BALL SCREW
- 2-AXLE BACKGAUGE MOVES
- ERGONOMIC DESIGN

SPECIAL ACCESSORIES:
TEDA SPEED GRIP QUICK-CHANGE SYSTEM TOP, FOR STANDARD AMADA/PROMECAM TOOLS
6 AXES BACKGAUGE X1/X2/R1/R2/Z1/Z2
IRIS RAPID BEND, SAFETY DEVICE, TRAVELS AT RAPID TRAVERSE TO THE MUTE POINT

THE MACHINE CAN BE TRANSPORTED BY FORKL
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 3.380 €
Ubicación: Land-screw compressor kaeser cs91
compressor after service 

technical data:
capacity: 9,10 m3/min (9100l/min);

engine: 55 kw;
pressure: 7,5 bar;
year: 2000

working hours 13162 h SCREW COMPRESSOR KAESER CS91 COMPRESSOR AFTER SERVICE TECHNICAL DATA: CAPACITY: 9,10 M3/MIN (9100L/MIN); ENGINE: 55 KW; PRESSURE: 7,5 BAR; YEAR: 2000 WORKING HOURS 13162 H
Vendedor: P.H.U. Airspaw
Año de construcción: usado
Precio: used machinery auction RESALE 25 €
Ubicación: Land-weight approx.: 8 kg<br/>dimensions (l x w x h) approx.: 560 x 300 x 230 mm<br/>description: absorbed power 2000 w. no-load speed 15000 /min. cutting depth 0-3.5 mm. total cut width 110 mm. rebate´s depth 16 mm<br> certified delivery by parcel service to the buyers address on the peninsula. for other destinations, ask for prices WEIGHT APPROX.: 8 KG
DIMENSIONS (L X W X H) APPROX.: 560 X 300 X 230 MM
DESCRIPTION: ABSORBED POWER 2000 W. NO-LOAD SPEED 15000 /MIN. CUTTING DEPTH 0-3.5 MM. TOTAL CUT WIDTH 110 MM. REBATE´S DEPTH 16 MM
CERTIFIED DELIVERY BY PARCEL SERVICE TO THE BUYERS ADDRESS ON THE PENINSULA. FOR OTHER DESTINATIONS, ASK FOR PRICES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-edgebander symbel coronel; good condition; cleaned and checked, installed new bearings; working width 60 mm; 2-roll; suitable for cold glue; glue tank height-adjustable.

edge gluing machine symbel coronel; good condition; cleaned and checked; new bearings; working width 60mm; two rollers; used for cold glue; glue reservoir adjustable in hight. EDGEBANDER SYMBEL CORONEL; GOOD CONDITION; CLEANED AND CHECKED, INSTALLED NEW BEARINGS; WORKING WIDTH 60 MM; 2-ROLL; SUITABLE FOR COLD GLUE; GLUE TANK HEIGHT-ADJUSTABLE. EDGE GLUING MACHINE SYMBEL CORONEL; GOOD CONDITION; CLEANED AND CHECKED; NEW BEARINGS; WORKING WIDTH 60MM; TWO ROLLERS; USED FOR COLD GLUE; GLUE RESERVOIR ADJUSTABLE IN HIGHT.
Vendedor: Joachim Ethner Handelsvertretungen
Año de construcción: usado
Precio: used machinery auction RESALE 25 €
Ubicación: Land-weight approx.: 8 kg<br/>dimensions (l x w x h) approx.: 560 x 300 x 230 mm<br/>description: absorbed power 2000 w. no-load speed 15000 /min. cutting depth 0-3.5 mm. total cut width 110 mm. rebate´s depth 16 mm<br> certified delivery by parcel service to the buyers address on the peninsula. for other destinations, ask for prices WEIGHT APPROX.: 8 KG
DIMENSIONS (L X W X H) APPROX.: 560 X 300 X 230 MM
DESCRIPTION: ABSORBED POWER 2000 W. NO-LOAD SPEED 15000 /MIN. CUTTING DEPTH 0-3.5 MM. TOTAL CUT WIDTH 110 MM. REBATE´S DEPTH 16 MM
CERTIFIED DELIVERY BY PARCEL SERVICE TO THE BUYERS ADDRESS ON THE PENINSULA. FOR OTHER DESTINATIONS, ASK FOR PRICES
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more SERV types: