995 ofertas

Año de construcción: usado
Ubicación: Land-used, year 2001.

ima avantage is 8200 a single-sided automatic edge shipping glue and finishing machine

in law execution
edge gluing with synthetic resin hot melt adhesive

technical data:
edging material:
a) veneer / coils and strips
b) plastic / coils and strips
c) solid wood mouldings
= edge height approx. 14-55 mm
edge thickness = approx. 0.4 20 mm
plate thickness = approx. 10-50 mm
min. panel width = 60 mm
min. panel length = 150 mm
max edge cross section:
-bar = approx. 20 x 50 mm
-pvc = approx. 3 x 55 mm
plates recusal from
the chain conveyor = 35 mm
drive for speed of
8-20 m / min, mech. infinitely variable

feed speed 4-20 m / min.

imatronic 121 with system software - integrated software plc replaced separate programmable machine controller
programming largely s5 compatible
-integrated control with maximum 64 routes features

486-compact pc industrial design with front panel (protection class ip 65),
hard disk 200 mb (minimum), ram 4 mb
floppy drive 3â½ "1.44 mb, screen color lcd

trimming unit 08.376
formatted to the edges after milling/calibration
workpieces or for milling of lateral grooves.
profiles, or folding
with 2 motors a 3.0 kw, 12000 rpm, 200 hz,
motor 1 in the tracking and motor 2 in the opposite direction working,

spotlight 300 lg, 1,5 kw, to the
preheating the workpiece edge

gluing unit 283.1513, straight edge 3 mm + bars

min. length of strip - simple/multiple roller 150 mm
min bar length 300 mm
min. strip height 14 mm
strip height 50 mm
maximum bar length at high hood 1200 mm

gluing unit designed for the pure mode,.

glue specification 0.8 l for pur glue
compl. m. cartridge & connectors

before melting pan approx. 1 l
regulated with a heating capacity 3 x 400 w

08.421, 2 motors, the top pressure mounted end-trimming unit
to the caps of the front and rear edges or edges overhang.
for caps cuts flush or with a chamfer, with 2 hm - cap saw blade 160 x 22 mm z = 48
min. plate recusal: approx. 30 mm + max edge or strip thickness
min. panel length: approx. 150 mm
min. distance between 2 pieces approx. 650 mm
maximum working speed: 20 m / min.
front / hinterkantentastschuh aussteuerbar
with 1 motor 660 w, 400 v, 200 hz, 12000 rpm,.
max edge height 55 mm maximum edge thickness 20 mm
static frequency converter for motors
> 0.75 to 1.5 kw, incl. filter and braking resistor mains connection 3-phase, 400-480 v, +/-5%, 50/60 hz hor. pneum.. swivel device 0 + 10 â° for caps 08.421 per motor
with pneumatic ausrã¼ckbarer page keying, manually positioned on digital display.

milling unit 08.055 for 2 motors with heights keying, groping at the side,
up to 30 degrees, without tools with mechanical digital display 09 for the horizontal and vertical adjustment with single suction nozzle
before milling from above and below
with 1 motor of 1850 w, 400 v, 200 hz, 12000 rpm
20 degrees tilting working ikl658078 in the opposite direction
static frequency converter for motors > 2.2 to 4.0 kw, incl. filter and braking resistor mains connection 3-phase, 400-480 v, +/-5%, 50/60 hz ikl658648 motor with hsk holder
with side key skid for 1 motor, for the cracks, plate off and profile milling, ikl658805 2 st
linear axis for vertical motor positioning of the height of keying, fine adjustment

2 st pneumatic adjustment of the automatic upgrade at thin / thick edge or decommissioning at last

sound swallowing/guard for compound and 1 milling unit, suction connector 2 x 80 upwards,
locking mechanism according to the regulations of the bg

multiple processing unit 08.346,
to the fine milling and profile milling of the upper longitudinal edge as well as the front and rear edge.
with height and page keying,.
pneumatic feed motion horizontally and vertically.
with manual motor positioning in axle and radial direction via digital display, with 1 motor 660 w, 400 v, 200 hz, 12000 rpm,.
with quick change facility, without any tools, including static frequency converters with automatic brake device. height 235 mm,.
min. workpiece recusal 35 mm + edge thickness min. distance between 2 pieces: approx. 600 mm maximum speed: approx. 16 m / min. min. workpiece thickness at the corners copy 16 mm.

linear axis for horizontal motor positioning of the page scanner for automatic program change (radius - bevel) and fine adjustment at the mfa
with vertical positioning on 2 fixed points for automatic program change (e.g. bar/plastic edge)
 
tool hsk-25r to the copy / cut for r1-r3 only original equipment

multiple processing unit 08.346,
to the fine milling and profile milling the bottom lengthwise edge, as well as the front and rear edge, with height and page scanner,,
pneumatic feed motion horizontally and vertically. with manual motor positioning in
axle and radial direction via digital display, with 1 motor 660 w, 400 v, 200 hz, 12000 rpm,
with quick change facility, without any tools, including static frequency converter,.
with automatic brake device, height 235 mm,.
min. workpiece recusal 35 mm + edge thickness min. distance between 2 pieces: approx. 600 mm maximum speed: approx. 16 m / min.
min. werkstã¼ckdick corners copying 16 mm.
linear axis for horizontal motor positioning of the page scanner for automatic program change (radius - bevel) and fine adjustment at the mfa
with vertical positioning on 2 fixed points for automatic program change (e.g. bar/plastic edge) ikl0079659 79659 1 st
tool hsk-25r to the copy / cut for r1-r3 only original equipment

sound swallowing/guard with 2 hood suction nozzle ã?100 mm, below the transport chain, length 1200 mm

groove/groove/profile milling unit 08.183,
for cutting through side or bottom grooves, rebates or profiles, 1 motor
flã¤chennuten max to workpiece recusal minus 10 mm, swivel, without keying,
maximum engine power 3 kw without tool
with mechanical digital readout for the horizontal and vertical adjustment
 with 1 motor 3.0 kw, 12000 rpm, 200 hz, kns 51
maximum machining cross-section ca 20 m / min. approx. 70 qmm
working in the tracking
static frequency converter for motors
> 2.2 to 4.0 kw, incl. filter and braking resistor mains connection 3-phase, 400-480 v, +/-5%, 50/60 hz electro-pneumatic control of usage for the groove/groove/profilfrã¤sagg
sound swallowing/guard length 600-1050 mm

course reserve for 1 kantenschleif-unit with pre-wiring

profile scraping unit 08.519
the after scraping a upper and lower machined viertelkreisprofiles on glued on plastic edging materials, with pre-set hm scraper tools.
with height keying, side momentary mechanical digital display 09 for the horizontal and vertical adjustment, with electro-pneumatic horizontal jackshaft device for the upper and lower pulling blades unit with electro-pneumatic vertical release device for the lower unit of scraper
with single suction nozzle.
height 235 mm, min. workpiece thickness 16 mm iklr2 2 st
r = 2 mm
 
1 adjustment axis vertically for the profile scraper 08.519
dust-catching box for profile scraping unit

course reserve for 1 profile scraper with pre-wiring

auto-sensing scraping unit 08.50
to remove hot melt adhesives from the periphery of workpiece upper and subpages, controllable, with 2 cutting plates,
workpiece recusal min with 2 air nozzles to clean blow of the scraper 30 mm

course reserve for detergent indication with pre-wiring

fasschleif/buffing unit 08.612, not oscillating, after cleaning the top and bottom flush milled kantenmateriales or thick edges, polishing pivots on a vertical and horizontal axis
with 2 motors 0.25 kw, 230/400v, 50 hz, 1500 rpm.
with 1 polishing wheel diameter. 40 x 200 x 18
height 235 mm

pneumatic release device for the buffing unit 08.612

1 set of schwabbelscheiben2 st
for the aforementioned buffing unit 08.612 running in sticky-brite
complete with mounts
 
smoothness aggregate 08.53
to smooth the milled and
drawn out pvc/abs profile edge, for r = 1,3-4 mm, 1 upper and 1 lower smoothness zone,
min. workpiece thickness with horizontal pneumatic clutch device 16 mm

machine is still connected and can be seen in operation.
sale from location near stuttgart

the technical description comes from the original-from the manufacturer
 

heavy equipment and machinery and equipment, without warranty.
technical data, year of manufacture and condition no warranty! bought as seen!
subject to prior sale

delivery: from site's terms & conditions apply

USED, YEAR 2001. IMA AVANTAGE IS 8200 A SINGLE-SIDED AUTOMATIC EDGE SHIPPING GLUE AND FINISHING MACHINE IN LAW EXECUTION EDGE GLUING WITH SYNTHETIC RESIN HOT MELT ADHESIVE TECHNICAL DATA: EDGING MATERIAL: A) VENEER / COILS AND STRIPS B) PLASTIC / COILS AND STRIPS C) SOLID WOOD MOULDINGS = EDGE HEIGHT APPROX. 14-55 MM EDGE THICKNESS = APPROX. 0.4 20 MM PLATE THICKNESS = APPROX. 10-50 MM MIN. PANEL WIDTH = 60 MM MIN. PANEL LENGTH = 150 MM MAX EDGE CROSS SECTION: -BAR = APPROX. 20 X 50 MM -PVC = APPROX. 3 X 55 MM PLATES RECUSAL FROM THE CHAIN CONVEYOR = 35 MM DRIVE FOR SPEED OF 8-20 M / MIN, MECH. INFINITELY VARIABLE FEED SPEED 4-20 M / MIN. IMATRONIC 121 WITH SYSTEM SOFTWARE - INTEGRATED SOFTWARE PLC REPLACED SEPARATE PROGRAMMABLE MACHINE CONTROLLER PROGRAMMING LARGELY S5 COMPATIBLE -INTEGRATED CONTROL WITH MAXIMUM 64 ROUTES FEATURES 486-COMPACT PC INDUSTRIAL DESIGN WITH FRONT PANEL (PROTECTION CLASS IP 65), HARD DISK 200 MB (MINIMUM), RAM 4 MB FLOPPY DRIVE 3½ "1.44 MB, SCREEN COLOR LCD TRIMMING UNIT 08.376 FORMATTED TO THE EDGES AFTER MILLING/CALIBRATION WORKPIECES OR FOR MILLING OF LATERAL GROOVES. PROFILES, OR FOLDING WITH 2 MOTORS A 3.0 KW, 12000 RPM, 200 HZ, MOTOR 1 IN THE TRACKING AND MOTOR 2 IN THE OPPOSITE DIRECTION WORKING, SPOTLIGHT 300 LG, 1,5 KW, TO THE PREHEATING THE WORKPIECE EDGE GLUING UNIT 283.1513, STRAIGHT EDGE 3 MM + BARS MIN. LENGTH OF STRIP - SIMPLE/MULTIPLE ROLLER 150 MM MIN BAR LENGTH 300 MM MIN. STRIP HEIGHT 14 MM STRIP HEIGHT 50 MM MAXIMUM BAR LENGTH AT HIGH HOOD 1200 MM GLUING UNIT DESIGNED FOR THE PURE MODE,. GLUE SPECIFICATION 0.8 L FOR PUR GLUE COMPL. M. CARTRIDGE & CONNECTORS BEFORE MELTING PAN APPROX. 1 L REGULATED WITH A HEATING CAPACITY 3 X 400 W 08.421, 2 MOTORS, THE TOP PRESSURE MOUNTED END-TRIMMING UNIT TO THE CAPS OF THE FRONT AND REAR EDGES OR EDGES OVERHANG. FOR CAPS CUTS FLUSH OR WITH A CHAMFER, WITH 2 HM - CAP SAW BLADE 160 X 22 MM Z = 48 MIN. PLATE RECUSAL: APPROX. 30 MM + MAX EDGE OR STRIP THICKNESS MIN. PANEL LENGTH: APPROX. 150 MM MIN. DISTANCE BETWEEN 2 PIECES APPROX. 650 MM MAXIMUM WORKING SPEED: 20 M / MIN. FRONT / HINTERKANTENTASTSCHUH AUSSTEUERBAR WITH 1 MOTOR 660 W, 400 V, 200 HZ, 12000 RPM,. MAX EDGE HEIGHT 55 MM MAXIMUM EDGE THICKNESS 20 MM STATIC FREQUENCY CONVERTER FOR MOTORS > 0.75 TO 1.5 KW, INCL. FILTER AND BRAKING RESISTOR MAINS CONNECTION 3-PHASE, 400-480 V, +/-5%, 50/60 HZ HOR. PNEUM.. SWIVEL DEVICE 0 + 10 ° FOR CAPS 08.421 PER MOTOR WITH PNEUMATIC AUSRüCKBARER PAGE KEYING, MANUALLY POSITIONED ON DIGITAL DISPLAY. MILLING UNIT 08.055 FOR 2 MOTORS WITH HEIGHTS KEYING, GROPING AT THE SIDE, UP TO 30 DEGREES, WITHOUT TOOLS WITH MECHANICAL DIGITAL DISPLAY 09 FOR THE HORIZONTAL AND VERTICAL ADJUSTMENT WITH SINGLE SUCTION NOZZLE BEFORE MILLING FROM ABOVE AND BELOW WITH 1 MOTOR OF 1850 W, 400 V, 200 HZ, 12000 RPM 20 DEGREES TILTING WORKING IKL658078 IN THE OPPOSITE DIRECTION STATIC FREQUENCY CONVERTER FOR MOTORS > 2.2 TO 4.0 KW, INCL. FILTER AND BRAKING RESISTOR MAINS CONNECTION 3-PHASE, 400-480 V, +/-5%, 50/60 HZ IKL658648 MOTOR WITH HSK HOLDER WITH SIDE KEY SKID FOR 1 MOTOR, FOR THE CRACKS, PLATE OFF AND PROFILE MILLING, IKL658805 2 ST LINEAR AXIS FOR VERTICAL MOTOR POSITIONING OF THE HEIGHT OF KEYING, FINE ADJUSTMENT 2 ST PNEUMATIC ADJUSTMENT OF THE AUTOMATIC UPGRADE AT THIN / THICK EDGE OR DECOMMISSIONING AT LAST SOUND SWALLOWING/GUARD FOR COMPOUND AND 1 MILLING UNIT, SUCTION CONNECTOR 2 X 80 UPWARDS, LOCKING MECHANISM ACCORDING TO THE REGULATIONS OF THE BG MULTIPLE PROCESSING UNIT 08.346, TO THE FINE MILLING AND PROFILE MILLING OF THE UPPER LONGITUDINAL EDGE AS WELL AS THE FRONT AND REAR EDGE. WITH HEIGHT AND PAGE KEYING,. PNEUMATIC FEED MOTION HORIZONTALLY AND VERTICALLY. WITH MANUAL MOTOR POSITIONING IN AXLE AND RADIAL DIRECTION VIA DIGITAL DISPLAY, WITH 1 MOTOR 660 W, 400 V, 200 HZ, 12000 RPM,. WITH QUICK CHANGE FACILITY, WITHOUT ANY TOOLS, INCLUDING STATIC FREQUENCY CONVERTERS WITH AUTOMATIC BRAKE DEVICE. HEIGHT 235 MM,. MIN. WORKPIECE RECUSAL 35 MM + EDGE THICKNESS MIN. DISTANCE BETWEEN 2 PIECES: APPROX. 600 MM MAXIMUM SPEED: APPROX. 16 M / MIN. MIN. WORKPIECE THICKNESS AT THE CORNERS COPY 16 MM. LINEAR AXIS FOR HORIZONTAL MOTOR POSITIONING OF THE PAGE SCANNER FOR AUTOMATIC PROGRAM CHANGE (RADIUS - BEVEL) AND FINE ADJUSTMENT AT THE MFA WITH VERTICAL POSITIONING ON 2 FIXED POINTS FOR AUTOMATIC PROGRAM CHANGE (E.G. BAR/PLASTIC EDGE) TOOL HSK-25R TO THE COPY / CUT FOR R1-R3 ONLY ORIGINAL EQUIPMENT MULTIPLE PROCESSING UNIT 08.346, TO THE FINE MILLING AND PROFILE MILLING THE BOTTOM LENGTHWISE EDGE, AS WELL AS THE FRONT AND REAR EDGE, WITH HEIGHT AND PAGE SCANNER,, PNEUMATIC FEED MOTION HORIZONTALLY AND VERTICALLY. WITH MANUAL MOTOR POSITIONING IN AXLE AND RADIAL DIRECTION VIA DIGITAL DISPLAY, WITH 1 MOTOR 660 W, 400 V, 200 HZ, 12000 RPM, WITH QUICK CHANGE FACILITY, WITHOUT ANY TOOLS, INCLUDING STATIC FREQUENCY CONVERTER,. WITH AUTOMATIC BRAKE DEVICE, HEIGHT 235 MM,. MIN. WORKPIECE RECUSAL 35 MM + EDGE THICKNESS MIN. DISTANCE BETWEEN 2 PIECES: APPROX. 600 MM MAXIMUM SPEED: APPROX. 16 M / MIN. MIN. WERKSTüCKDICK CORNERS COPYING 16 MM. LINEAR AXIS FOR HORIZONTAL MOTOR POSITIONING OF THE PAGE SCANNER FOR AUTOMATIC PROGRAM CHANGE (RADIUS - BEVEL) AND FINE ADJUSTMENT AT THE MFA WITH VERTICAL POSITIONING ON 2 FIXED POINTS FOR AUTOMATIC PROGRAM CHANGE (E.G. BAR/PLASTIC EDGE) IKL0079659 79659 1 ST TOOL HSK-25R TO THE COPY / CUT FOR R1-R3 ONLY ORIGINAL EQUIPMENT SOUND SWALLOWING/GUARD WITH 2 HOOD SUCTION NOZZLE �100 MM, BELOW THE TRANSPORT CHAIN, LENGTH 1200 MM GROOVE/GROOVE/PROFILE MILLING UNIT 08.183, FOR CUTTING THROUGH SIDE OR BOTTOM GROOVES, REBATES OR PROFILES, 1 MOTOR FLäCHENNUTEN MAX TO WORKPIECE RECUSAL MINUS 10 MM, SWIVEL, WITHOUT KEYING, MAXIMUM ENGINE POWER 3 KW WITHOUT TOOL WITH MECHANICAL DIGITAL READOUT FOR THE HORIZONTAL AND VERTICAL ADJUSTMENT WITH 1 MOTOR 3.0 KW, 12000 RPM, 200 HZ, KNS 51 MAXIMUM MACHINING CROSS-SECTION CA 20 M / MIN. APPROX. 70 QMM WORKING IN THE TRACKING STATIC FREQUENCY CONVERTER FOR MOTORS > 2.2 TO 4.0 KW, INCL. FILTER AND BRAKING RESISTOR MAINS CONNECTION 3-PHASE, 400-480 V, +/-5%, 50/60 HZ ELECTRO-PNEUMATIC CONTROL OF USAGE FOR THE GROOVE/GROOVE/PROFILFRäSAGG SOUND SWALLOWING/GUARD LENGTH 600-1050 MM COURSE RESERVE FOR 1 KANTENSCHLEIF-UNIT WITH PRE-WIRING PROFILE SCRAPING UNIT 08.519 THE AFTER SCRAPING A UPPER AND LOWER MACHINED VIERTELKREISPROFILES ON GLUED ON PLASTIC EDGING MATERIALS, WITH PRE-SET HM SCRAPER TOOLS. WITH HEIGHT KEYING, SIDE MOMENTARY MECHANICAL DIGITAL DISPLAY 09 FOR THE HORIZONTAL AND VERTICAL ADJUSTMENT, WITH ELECTRO-PNEUMATIC HORIZONTAL JACKSHAFT DEVICE FOR THE UPPER AND LOWER PULLING BLADES UNIT WITH ELECTRO-PNEUMATIC VERTICAL RELEASE DEVICE FOR THE LOWER UNIT OF SCRAPER WITH SINGLE SUCTION NOZZLE. HEIGHT 235 MM, MIN. WORKPIECE THICKNESS 16 MM IKLR2 2 ST R = 2 MM 1 ADJUSTMENT AXIS VERTICALLY FOR THE PROFILE SCRAPER 08.519 DUST-CATCHING BOX FOR PROFILE SCRAPING UNIT COURSE RESERVE FOR 1 PROFILE SCRAPER WITH PRE-WIRING AUTO-SENSING SCRAPING UNIT 08.50 TO REMOVE HOT MELT ADHESIVES FROM THE PERIPHERY OF WORKPIECE UPPER AND SUBPAGES, CONTROLLABLE, WITH 2 CUTTING PLATES, WORKPIECE RECUSAL MIN WITH 2 AIR NOZZLES TO CLEAN BLOW OF THE SCRAPER 30 MM COURSE RESERVE FOR DETERGENT INDICATION WITH PRE-WIRING FASSCHLEIF/BUFFING UNIT 08.612, NOT OSCILLATING, AFTER CLEANING THE TOP AND BOTTOM FLUSH MILLED KANTENMATERIALES OR THICK EDGES, POLISHING PIVOTS ON A VERTICAL AND HORIZONTAL AXIS WITH 2 MOTORS 0.25 KW, 230/400V, 50 HZ, 1500 RPM. WITH 1 POLISHING WHEEL DIAMETER. 40 X 200 X 18 HEIGHT 235 MM PNEUMATIC RELEASE DEVICE FOR THE BUFFING UNIT 08.612 1 SET OF SCHWABBELSCHEIBEN2 ST FOR THE AFOREMENTIONED BUFFING UNIT 08.612 RUNNING IN STICKY-BRITE COMPLETE WITH MOUNTS SMOOTHNESS AGGREGATE 08.53 TO SMOOTH THE MILLED AND DRAWN OUT PVC/ABS PROFILE EDGE, FOR R = 1,3-4 MM, 1 UPPER AND 1 LOWER SMOOTHNESS ZONE, MIN. WORKPIECE THICKNESS WITH HORIZONTAL PNEUMATIC CLUTCH DEVICE 16 MM MACHINE IS STILL CONNECTED AND CAN BE SEEN IN OPERATION. SALE FROM LOCATION NEAR STUTTGART THE TECHNICAL DESCRIPTION COMES FROM THE ORIGINAL-FROM THE MANUFACTURER HEAVY EQUIPMENT AND MACHINERY AND EQUIPMENT, WITHOUT WARRANTY. TECHNICAL DATA, YEAR OF MANUFACTURE AND CONDITION NO WARRANTY! BOUGHT AS SEEN! SUBJECT TO PRIOR SALE DELIVERY: FROM SITE'S TERMS & CONDITIONS APPLY
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-doughweightrange 40 - 150 g, capacity approx. 7.000 pcs./h\r\nrighthand - operation include \r\ndivider, 5 rows, \r\ndepositing device \r\n  working width 600 mm\r\n  max. setting length  2000 mm\r\n  variable speed\r\n\r\ncategory: bakery machine\r\nsales of bakery machines used machines bakery resolution food machine reconditioned condition as it is new DOUGHWEIGHTRANGE 40 - 150 G, CAPACITY APPROX. 7.000 PCS./H\R\NRIGHTHAND - OPERATION INCLUDE \R\NDIVIDER, 5 ROWS, \R\NDEPOSITING DEVICE \R\N WORKING WIDTH 600 MM\R\N MAX. SETTING LENGTH 2000 MM\R\N VARIABLE SPEED\R\N\R\NCATEGORY: BAKERY MACHINE\R\NSALES OF BAKERY MACHINES USED MACHINES BAKERY RESOLUTION FOOD MACHINE RECONDITIONED CONDITION AS IT IS NEW
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-no. 04145

planer thicknesser scm / wood force fs 41 elite tersa

year 2014, as new
approx. 10 hours

minimax elite - the heavy machines line of craft and industry leading-edge technology of the scm group
with tersa planer blade quick-change system for instant planer blade change
 
drum 㸠87 mm / tersa knife 4 piece

surface planer:
total length of tables: 2,000 mm
task length: 1.034 mm
table height: 870 mm
working width: 410 mm
serrated table lips
depth of cut: max 5 mm

thickness planer:
thicknessing table dimensions: 775 x 423 mm
working height: min. 3 / max. 230 mm
speeds: 6 / 12 m / min

speed: 5,200 1/min
motor power: 5 kw / 400v oblique steel feed roller for constant and uniform wood feeding toothed
feed rate with a separate engine and two-speed
numeric display for the thickness table height

execution:
tersa planer blade quick change system
tersa knife shaft for instant planer blade change
especially quiet running
   
the 2000 mm long dressing tables allow easy dressing of large workpieces
work tables are made of cast iron to annealed, and hardened, this insensitive and permanently plan,
stable large dressing aluminium stop with rod guide (1200 x 160 mm)
planing unit adjustment via hand wheel with numeric display for the planing height
the high weight of the machine ensures highest precision and smooth operation
powerful industrial motor
robust steel / cast iron construction
stable, large dressing fence made of aluminium (1200 x 160 mm) with precise round rod steel guide suction nozzle diameter: 2 x 120 mm
machine ready, incl. el. connection cable with 16a plug
1 set spare tersa knife
1 spare drive belt
1 set of technical documentation: user manual, el. wiring diagrams, parts list

machine prepared for mounting a milling
 
shipping size: 2000 x 800 x 1200 mm, approx. 500 kg

heavy equipment and machinery and equipment, without warranty.
technical data, year of manufacture and condition no warranty! bought as seen!
subject to prior sale

delivery: in stock our general terms and conditions apply NO. 04145 PLANER THICKNESSER SCM / WOOD FORCE FS 41 ELITE TERSA YEAR 2014, AS NEW APPROX. 10 HOURS MINIMAX ELITE - THE HEAVY MACHINES LINE OF CRAFT AND INDUSTRY LEADING-EDGE TECHNOLOGY OF THE SCM GROUP WITH TERSA PLANER BLADE QUICK-CHANGE SYSTEM FOR INSTANT PLANER BLADE CHANGE DRUM ø 87 MM / TERSA KNIFE 4 PIECE SURFACE PLANER: TOTAL LENGTH OF TABLES: 2,000 MM TASK LENGTH: 1.034 MM TABLE HEIGHT: 870 MM WORKING WIDTH: 410 MM SERRATED TABLE LIPS DEPTH OF CUT: MAX 5 MM THICKNESS PLANER: THICKNESSING TABLE DIMENSIONS: 775 X 423 MM WORKING HEIGHT: MIN. 3 / MAX. 230 MM SPEEDS: 6 / 12 M / MIN SPEED: 5,200 1/MIN MOTOR POWER: 5 KW / 400V OBLIQUE STEEL FEED ROLLER FOR CONSTANT AND UNIFORM WOOD FEEDING TOOTHED FEED RATE WITH A SEPARATE ENGINE AND TWO-SPEED NUMERIC DISPLAY FOR THE THICKNESS TABLE HEIGHT EXECUTION: TERSA PLANER BLADE QUICK CHANGE SYSTEM TERSA KNIFE SHAFT FOR INSTANT PLANER BLADE CHANGE ESPECIALLY QUIET RUNNING THE 2000 MM LONG DRESSING TABLES ALLOW EASY DRESSING OF LARGE WORKPIECES WORK TABLES ARE MADE OF CAST IRON TO ANNEALED, AND HARDENED, THIS INSENSITIVE AND PERMANENTLY PLAN, STABLE LARGE DRESSING ALUMINIUM STOP WITH ROD GUIDE (1200 X 160 MM) PLANING UNIT ADJUSTMENT VIA HAND WHEEL WITH NUMERIC DISPLAY FOR THE PLANING HEIGHT THE HIGH WEIGHT OF THE MACHINE ENSURES HIGHEST PRECISION AND SMOOTH OPERATION POWERFUL INDUSTRIAL MOTOR ROBUST STEEL / CAST IRON CONSTRUCTION STABLE, LARGE DRESSING FENCE MADE OF ALUMINIUM (1200 X 160 MM) WITH PRECISE ROUND ROD STEEL GUIDE SUCTION NOZZLE DIAMETER: 2 X 120 MM MACHINE READY, INCL. EL. CONNECTION CABLE WITH 16A PLUG 1 SET SPARE TERSA KNIFE 1 SPARE DRIVE BELT 1 SET OF TECHNICAL DOCUMENTATION: USER MANUAL, EL. WIRING DIAGRAMS, PARTS LIST MACHINE PREPARED FOR MOUNTING A MILLING SHIPPING SIZE: 2000 X 800 X 1200 MM, APPROX. 500 KG HEAVY EQUIPMENT AND MACHINERY AND EQUIPMENT, WITHOUT WARRANTY. TECHNICAL DATA, YEAR OF MANUFACTURE AND CONDITION NO WARRANTY! BOUGHT AS SEEN! SUBJECT TO PRIOR SALE DELIVERY: IN STOCK OUR GENERAL TERMS AND CONDITIONS APPLY
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 800 mm<br/>y-travel: 800 mm<br/>z-travel: 800 mm<br/>control: heidenhain mill plus it <br/>table surface area: Ø 900 x 700 mm<br/>milling-head swivable   +/-: +30/-120 °<br/>tool adaptor: hsk 63 <br/>turning speeds: 18.000 u/min<br/>power capacity - milling spindle: 35 kw<br/>: 40 st.<br/>table load: 1,4 t<br/>dimensions (hxwxd): 5,0 x 4,25 x 3,1 m<br/>total power requirement: 70 kva<br/>weight of the machine ca.: 9,0 t<br/>5- axis universal machining centre with swiveling head and round table<br/><br/>- round table Ø 900 x 700 mm<br/>- swiveling head (full axis)<br/>- 3d- probe heidenhain ts 641<br/>- blum laser tool setter<br/>- chip conveyor<br/>- internal coolant with filter<br/>- air blast trought spindle<br/>- mode 4 (manual working with open door)<br/>- ext .elec. hand wheel<br/><br/><br/><br/><br/><br/> X-TRAVEL: 800 MM
Y-TRAVEL: 800 MM
Z-TRAVEL: 800 MM
CONTROL: HEIDENHAIN MILL PLUS IT
TABLE SURFACE AREA: Ø 900 X 700 MM
MILLING-HEAD SWIVABLE +/-: +30/-120 °
TOOL ADAPTOR: HSK 63
TURNING SPEEDS: 18.000 U/MIN
POWER CAPACITY - MILLING SPINDLE: 35 KW
: 40 ST.
TABLE LOAD: 1,4 T
DIMENSIONS (HXWXD): 5,0 X 4,25 X 3,1 M
TOTAL POWER REQUIREMENT: 70 KVA
WEIGHT OF THE MACHINE CA.: 9,0 T
5- AXIS UNIVERSAL MACHINING CENTRE WITH SWIVELING HEAD AND ROUND TABLE

- ROUND TABLE Ø 900 X 700 MM
- SWIVELING HEAD (FULL AXIS)
- 3D- PROBE HEIDENHAIN TS 641
- BLUM LASER TOOL SETTER
- CHIP CONVEYOR
- INTERNAL COOLANT WITH FILTER
- AIR BLAST TROUGHT SPINDLE
- MODE 4 (MANUAL WORKING WITH OPEN DOOR)
- EXT .ELEC. HAND WHEEL





Vendedor: Klaus Rosenboom GmbH
Año de construcción: usado
Ubicación: Land-used stainless steel storage tank

last purpose: unknown

capacity: 3000l
type: standing on the frame
material (media contact): 1.4301 / aisi304
design: single-walled
ground: flat bottom
topsoil: flat bottom
working pressure according to the nameplate: atm

dimensions tank:

container diameter: 1400 mm
distance from drain to the ground: 230 mm
total height: 2100 mm
height of feet: 215mm
cyl. height: 2010mm

materials:

inside: 1.4301 / aisi 304 external: 1.4301 / aisi 304

setup

manhole on the top shelf
mass of the frame 1400 x 1400mm
scaled outside
various socket USED STAINLESS STEEL STORAGE TANK LAST PURPOSE: UNKNOWN CAPACITY: 3000L TYPE: STANDING ON THE FRAME MATERIAL (MEDIA CONTACT): 1.4301 / AISI304 DESIGN: SINGLE-WALLED GROUND: FLAT BOTTOM TOPSOIL: FLAT BOTTOM WORKING PRESSURE ACCORDING TO THE NAMEPLATE: ATM DIMENSIONS TANK: CONTAINER DIAMETER: 1400 MM DISTANCE FROM DRAIN TO THE GROUND: 230 MM TOTAL HEIGHT: 2100 MM HEIGHT OF FEET: 215MM CYL. HEIGHT: 2010MM MATERIALS: INSIDE: 1.4301 / AISI 304 EXTERNAL: 1.4301 / AISI 304 SETUP MANHOLE ON THE TOP SHELF MASS OF THE FRAME 1400 X 1400MM SCALED OUTSIDE VARIOUS SOCKET
Vendedor: Inox Behälter GmbH
Año de construcción: usado
Precio: 6.800 €
Ubicación: Land-bore diameter: 8 mm<br/>number of heads horizontal: 5 st.<br/>number of heads vertical: 3 st.<br/>control: ja <br/>! machine is still in use and can be visited!<br/><br/>to sell on behalf of the customer!<br/><br/>1 stegherr drilling center type bz<br/>**************************************<br/>the machine has 3 aggregate slides, of which aggregate slides<br/>1 fixed and unit slides 2 and 3 via the control to preset values<br/>be positioned.<br/><br/>unit carriage 1 (fixed) equipped with:<br/>-------------------------------------------------- -<br/><br/>a) 1 drilling unit for drilling the front side of the workpieces with<br/>  triple drill head, drilling distance: 28/41 mm<br/>- drilling spindles individually retrievable<br/>- drilling stroke: max. 80 mm<br/>- speed ??of the drilling spindles: approx. 4000 rpm<br/>- engine power: approx. 1.1 kw<br/>- chip extraction: diameter 160 mm<br/>- suction hose upwards<br/><br/>b) 1 stainless steel high pressure glue nozzle<br/>- legemount adjustable via program<br/>- glue monitoring via program<br/><br/>c) 1 dowel driving head for dowel diameter 8 mm, dowel length 60 mm<br/>- feeding and separation of the dowels via vibratory conveyors<br/>  3 dowels, arranged like drill head, driving in max. 3 dowels<br/>  in one operation<br/>- workpiece stop, lowered via pneumatic cylinder, around the workpiece<br/>  to strike exactly<br/><br/>d) 1 top bandbohraggregat arranged from above, with triple drill head<br/>  for roto pot bore<br/>- drilling stroke: max. 80 mm<br/>- engine power: approx. 1.1 kw<br/>- speed: about 4500 rpm<br/><br/>e) 1 carriage with controlled axis (x)<br/>  for moving the drilling, glueing and dividing unit to the programmed<br/>  drilling positions<br/>- swivel axis, swivel range 90 °<br/>  for converting the drilling unit from end to longitudinal operation<br/>  here, the entire axis (x) is also swiveled around this axis<br/>  to be used for longitudinal operation<br/><br/>aggregate carriage 2<br/><br/>the entire unit can be positioned in the x-axis via a servomotor and<br/>can thus reach any position on the workpiece and there the programmed<br/>doing work.<br/><br/>the aggregate carriage is equipped with:<br/><br/>a) drilling unit with 3 individually retrievable spindles for drilling the<br/>  fighter, rung and post drilling patterns on the long side of the workpiece<br/>  or the dowel holes on the workpiece ends.<br/>- drilling distance: 28/41 mm<br/>- drilling stroke for each spindle: max. 80 mm<br/>- speed: about 4000 rpm<br/>- engine power: approx. 1.1 kw<br/><br/>b) drilling unit for lock plate hole, equipped with:<br/><br/>- simple boring head<br/>- fixed in height - distance from workpiece support: 51 mm<br/>- drill diameter: 2.5 mm<br/>- drilling stroke: max. 80 mm<br/>- speed: about 4500 rpm<br/>- engine power: approx. 1.1 kw<br/><br/>c) drilling unit for mounting holes:<br/><br/>- drilling stroke: max. 80 mm<br/>- speed: about 4500 rpm<br/>- engine power: approx. 1.1 kw<br/>- mechanically fixed in height - distance from workpiece support: 31 mm<br/><br/>d) workpiece support table<br/>  with pneumatic workpiece clamping device and mounted topfandbohraggregat<br/>- can be disconnected voom unit carriage (pneumatic) and the<br/>  aggregate slides can each over this point left or right<br/>  bohraufgabenausführen. this is horizontal from each one<br/>  arranged aggregate possible until the end of the workpiece<br/><br/>e) topfandbohraggregat arranged from above with triple drill head<br/>  for roto pot bore<br/>- drilling stroke: max. 80 mm<br/>- engine power: approx. 1.1 kw<br/>- speed: about 4500 rpm<br/><br/>aggregate carriage 3<br/><br/>servo axis in x direction, this turns on program on the<br/>workpiece length.<br/><br/>a) 1 drilling unit for drilling the front side of the wersktücke with triple <br/>drill head<br/>- drilling distance: 28/41 mm<br/>- drilling spindles individually retrievable<br/>- drilling stroke: max. 80 mm<br/>- drehzhal the drill spindles: about 4000 u / min<br/>- engine power: approx. 1.1 kw<br/>- chip extraction: diameter 160 mm<br/>- suction hose upwards<br/><br/>b) 1 stainless steel high pressure glue nozzle<br/>- legemount adjustable via program<br/>- glue monitoring via program<br/><br/>c) 1 dowel driving head for dowel diameter 8 mm, dowel length 60 mm<br/>- feeding and separation of the dowels via vibratory conveyors<br/>- 3 dowels, arranged like drill head, driving max. 3 dowels<br/>  in one operation<br/>- workpiece stop, lowered via pneumatic cylinder, around the workpiece<br/>  to strike exactly<br/><br/>d) 1 topfbandbohraggregat arranged from above<br/>  with triple drill head for roto pot bore<br/>- drilling stroke: max. 80 mm<br/>- engine power: approx. 1.1 kw<br/>- speed: about 4500 rpm<br/><br/>e) 1 carriage with controlled axis (x)<br/>  for moving the drilling, glue and dowel unit to the programmed<br/>  drilling positions<br/>- swivel axis, swivel range 90 °, for converting the drilling unit of<br/>  forehead-on longitudinal operation.<br/>  here, the entire axis (x) is also swiveled around this axis<br/>  to be used for longitudinal operation<br/><br/>the entire unit can be positioned in the x-axis via a servomotor and<br/>can thus reach any position on the workpiece and there the programmed<br/>doing work.<br/><br/>workpiece length scanning, so that the end holes are at the exact distance from<br/>external dimensions can be set.<br/>drilling unit automatically corrects any length deviations on the workpiece<br/>within a certain tolerance range.<br/><br/>for workpieces longer than 3 m, this workpiece must be in two working lengths<br/>be processed.<br/><br/>technical specifications:<br/><br/>- max. workpiece length: 3000 mm<br/>- min. workpiece length: 320 mm<br/>- workpiece thickness: 40-80 mm<br/>- workpiece clamping: pneumatic<br/>- workpiece loading or unloading: manually<br/>- all travel paths run on high-precision linear guides<br/>- 4 electronically program controlled axes (ball screw operation<br/>  or rack)<br/>- high-pressure glue system in stainless steel<br/>- glue monitoring via program<br/>- leichenge adjustable via control<br/>- 1 dowel vibration conveyor (large version) for anchor diameter 8 mm,<br/>  dowel length 60 mm<br/>- six-track dowel separation and feed (3x for right, 3x for left)<br/><br/>machine power is about 4 parts per minute. this is an average,<br/>which in individual cases may vary slightly upwards or downwards.<br/><br/>control of the machine<br/><br/>- pc / plc control based on windows<br/>- pc in industrial design with floppy disk drive, keyboard and<br/>  15farbbild flat monitor<br/>- user friendly machine program<br/>- high storage capacity<br/>- graphic blocks for visualization of the programmed drilling patterns<br/>program with error indication, i. errors that occur in the program flow<br/>  can be displayed on the screen and can thereby<br/>  be localized faster and corrected.<br/><br/>- extraction: 3 x diameter 160 upwards<br/>- extraction speed: approx. 25 m / s<br/><br/>the machine is online-enabled<br/><br/><br/>(techn. data according to manufacturer - without guarantee!)<br/><br/><br/><br/><br/> BORE DIAMETER: 8 MM
NUMBER OF HEADS HORIZONTAL: 5 ST.
NUMBER OF HEADS VERTICAL: 3 ST.
CONTROL: JA
! MACHINE IS STILL IN USE AND CAN BE VISITED!

TO SELL ON BEHALF OF THE CUSTOMER!

1 STEGHERR DRILLING CENTER TYPE BZ
**************************************
THE MACHINE HAS 3 AGGREGATE SLIDES, OF WHICH AGGREGATE SLIDES
1 FIXED AND UNIT SLIDES 2 AND 3 VIA THE CONTROL TO PRESET VALUES
BE POSITIONED.

UNIT CARRIAGE 1 (FIXED) EQUIPPED WITH:
-------------------------------------------------- -

A) 1 DRILLING UNIT FOR DRILLING THE FRONT SIDE OF THE WORKPIECES WITH
TRIPLE DRILL HEAD, DRILLING DISTANCE: 28/41 MM
- DRILLING SPINDLES INDIVIDUALLY RETRIEVABLE
- DRILLING STROKE: MAX. 80 MM
- SPEED ??OF THE DRILLING SPINDLES: APPROX. 4000 RPM
- ENGINE POWER: APPROX. 1.1 KW
- CHIP EXTRACTION: DIAMETER 160 MM
- SUCTION HOSE UPWARDS

B) 1 STAINLESS STEEL HIGH PRESSURE GLUE NOZZLE
- LEGEMOUNT ADJUSTABLE VIA PROGRAM
- GLUE MONITORING VIA PROGRAM

C) 1 DOWEL DRIVING HEAD FOR DOWEL DIAMETER 8 MM, DOWEL LENGTH 60 MM
- FEEDING AND SEPARATION OF THE DOWELS VIA VIBRATORY CONVEYORS
3 DOWELS, ARRANGED LIKE DRILL HEAD, DRIVING IN MAX. 3 DOWELS
IN ONE OPERATION
- WORKPIECE STOP, LOWERED VIA PNEUMATIC CYLINDER, AROUND THE WORKPIECE
TO STRIKE EXACTLY

D) 1 TOP BANDBOHRAGGREGAT ARRANGED FROM ABOVE, WITH TRIPLE DRILL HEAD
FOR ROTO POT BORE
- DRILLING STROKE: MAX. 80 MM
- ENGINE POWER: APPROX. 1.1 KW
- SPEED: ABOUT 4500 RPM

E) 1 CARRIAGE WITH CONTROLLED AXIS (X)
FOR MOVING THE DRILLING, GLUEING AND DIVIDING UNIT TO THE PROGRAMMED
DRILLING POSITIONS
- SWIVEL AXIS, SWIVEL RANGE 90 °
FOR CONVERTING THE DRILLING UNIT FROM END TO LONGITUDINAL OPERATION
HERE, THE ENTIRE AXIS (X) IS ALSO SWIVELED AROUND THIS AXIS
TO BE USED FOR LONGITUDINAL OPERATION

AGGREGATE CARRIAGE 2

THE ENTIRE UNIT CAN BE POSITIONED IN THE X-AXIS VIA A SERVOMOTOR AND
CAN THUS REACH ANY POSITION ON THE WORKPIECE AND THERE THE PROGRAMMED
DOING WORK.

THE AGGREGATE CARRIAGE IS EQUIPPED WITH:

A) DRILLING UNIT WITH 3 INDIVIDUALLY RETRIEVABLE SPINDLES FOR DRILLING THE
FIGHTER, RUNG AND POST DRILLING PATTERNS ON THE LONG SIDE OF THE WORKPIECE
OR THE DOWEL HOLES ON THE WORKPIECE ENDS.
- DRILLING DISTANCE: 28/41 MM
- DRILLING STROKE FOR EACH SPINDLE: MAX. 80 MM
- SPEED: ABOUT 4000 RPM
- ENGINE POWER: APPROX. 1.1 KW

B) DRILLING UNIT FOR LOCK PLATE HOLE, EQUIPPED WITH:

- SIMPLE BORING HEAD
- FIXED IN HEIGHT - DISTANCE FROM WORKPIECE SUPPORT: 51 MM
- DRILL DIAMETER: 2.5 MM
- DRILLING STROKE: MAX. 80 MM
- SPEED: ABOUT 4500 RPM
- ENGINE POWER: APPROX. 1.1 KW

C) DRILLING UNIT FOR MOUNTING HOLES:

- DRILLING STROKE: MAX. 80 MM
- SPEED: ABOUT 4500 RPM
- ENGINE POWER: APPROX. 1.1 KW
- MECHANICALLY FIXED IN HEIGHT - DISTANCE FROM WORKPIECE SUPPORT: 31 MM

D) WORKPIECE SUPPORT TABLE
WITH PNEUMATIC WORKPIECE CLAMPING DEVICE AND MOUNTED TOPFANDBOHRAGGREGAT
- CAN BE DISCONNECTED VOOM UNIT CARRIAGE (PNEUMATIC) AND THE
AGGREGATE SLIDES CAN EACH OVER THIS POINT LEFT OR RIGHT
BOHRAUFGABENAUSFüHREN. THIS IS HORIZONTAL FROM EACH ONE
ARRANGED AGGREGATE POSSIBLE UNTIL THE END OF THE WORKPIECE

E) TOPFANDBOHRAGGREGAT ARRANGED FROM ABOVE WITH TRIPLE DRILL HEAD
FOR ROTO POT BORE
- DRILLING STROKE: MAX. 80 MM
- ENGINE POWER: APPROX. 1.1 KW
- SPEED: ABOUT 4500 RPM

AGGREGATE CARRIAGE 3

SERVO AXIS IN X DIRECTION, THIS TURNS ON PROGRAM ON THE
WORKPIECE LENGTH.

A) 1 DRILLING UNIT FOR DRILLING THE FRONT SIDE OF THE WERSKTüCKE WITH TRIPLE
DRILL HEAD
- DRILLING DISTANCE: 28/41 MM
- DRILLING SPINDLES INDIVIDUALLY RETRIEVABLE
- DRILLING STROKE: MAX. 80 MM
- DREHZHAL THE DRILL SPINDLES: ABOUT 4000 U / MIN
- ENGINE POWER: APPROX. 1.1 KW
- CHIP EXTRACTION: DIAMETER 160 MM
- SUCTION HOSE UPWARDS

B) 1 STAINLESS STEEL HIGH PRESSURE GLUE NOZZLE
- LEGEMOUNT ADJUSTABLE VIA PROGRAM
- GLUE MONITORING VIA PROGRAM

C) 1 DOWEL DRIVING HEAD FOR DOWEL DIAMETER 8 MM, DOWEL LENGTH 60 MM
- FEEDING AND SEPARATION OF THE DOWELS VIA VIBRATORY CONVEYORS
- 3 DOWELS, ARRANGED LIKE DRILL HEAD, DRIVING MAX. 3 DOWELS
IN ONE OPERATION
- WORKPIECE STOP, LOWERED VIA PNEUMATIC CYLINDER, AROUND THE WORKPIECE
TO STRIKE EXACTLY

D) 1 TOPFBANDBOHRAGGREGAT ARRANGED FROM ABOVE
WITH TRIPLE DRILL HEAD FOR ROTO POT BORE
- DRILLING STROKE: MAX. 80 MM
- ENGINE POWER: APPROX. 1.1 KW
- SPEED: ABOUT 4500 RPM

E) 1 CARRIAGE WITH CONTROLLED AXIS (X)
FOR MOVING THE DRILLING, GLUE AND DOWEL UNIT TO THE PROGRAMMED
DRILLING POSITIONS
- SWIVEL AXIS, SWIVEL RANGE 90 °, FOR CONVERTING THE DRILLING UNIT OF
FOREHEAD-ON LONGITUDINAL OPERATION.
HERE, THE ENTIRE AXIS (X) IS ALSO SWIVELED AROUND THIS AXIS
TO BE USED FOR LONGITUDINAL OPERATION

THE ENTIRE UNIT CAN BE POSITIONED IN THE X-AXIS VIA A SERVOMOTOR AND
CAN THUS REACH ANY POSITION ON THE WORKPIECE AND THERE THE PROGRAMMED
DOING WORK.

WORKPIECE LENGTH SCANNING, SO THAT THE END HOLES ARE AT THE EXACT DISTANCE FROM
EXTERNAL DIMENSIONS CAN BE SET.
DRILLING UNIT AUTOMATICALLY CORRECTS ANY LENGTH DEVIATIONS ON THE WORKPIECE
WITHIN A CERTAIN TOLERANCE RANGE.

FOR WORKPIECES LONGER THAN 3 M, THIS WORKPIECE MUST BE IN TWO WORKING LENGTHS
BE PROCESSED.

TECHNICAL SPECIFICATIONS:

- MAX. WORKPIECE LENGTH: 3000 MM
- MIN. WORKPIECE LENGTH: 320 MM
- WORKPIECE THICKNESS: 40-80 MM
- WORKPIECE CLAMPING: PNEUMATIC
- WORKPIECE LOADING OR UNLOADING: MANUALLY
- ALL TRAVEL PATHS RUN ON HIGH-PRECISION LINEAR GUIDES
- 4 ELECTRONICALLY PROGRAM CONTROLLED AXES (BALL SCREW OPERATION
OR RACK)
- HIGH-PRESSURE GLUE SYSTEM IN STAINLESS STEEL
- GLUE MONITORING VIA PROGRAM
- LEICHENGE ADJUSTABLE VIA CONTROL
- 1 DOWEL VIBRATION CONVEYOR (LARGE VERSION) FOR ANCHOR DIAMETER 8 MM,
DOWEL LENGTH 60 MM
- SIX-TRACK DOWEL SEPARATION AND FEED (3X FOR RIGHT, 3X FOR LEFT)

MACHINE POWER IS ABOUT 4 PARTS PER MINUTE. THIS IS AN AVERAGE,
WHICH IN INDIVIDUAL CASES MAY VARY SLIGHTLY UPWARDS OR DOWNWARDS.

CONTROL OF THE MACHINE

- PC / PLC CONTROL BASED ON WINDOWS
- PC IN INDUSTRIAL DESIGN WITH FLOPPY DISK DRIVE, KEYBOARD AND
15FARBBILD FLAT MONITOR
- USER FRIENDLY MACHINE PROGRAM
- HIGH STORAGE CAPACITY
- GRAPHIC BLOCKS FOR VISUALIZATION OF THE PROGRAMMED DRILLING PATTERNS
PROGRAM WITH ERROR INDICATION, I. ERRORS THAT OCCUR IN THE PROGRAM FLOW
CAN BE DISPLAYED ON THE SCREEN AND CAN THEREBY
BE LOCALIZED FASTER AND CORRECTED.

- EXTRACTION: 3 X DIAMETER 160 UPWARDS
- EXTRACTION SPEED: APPROX. 25 M / S

THE MACHINE IS ONLINE-ENABLED


(TECHN. DATA ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-laser cutting machine
manufacturer: trumpf
type: trumatic l 3050
year of construction: 2006
control: siemens sinumerik 840 d
hours of operation: 40.628 h / 19.636 h

laser power: 5000 watt
work area: 3000 x 1500 x 115 mm
maximum sheet thickness/st: 25 mm
maximum sheet thickness/va: 20 mm
maximum sheet thickness/al: 12 mm
maximum speed: 200 / 300 m / min.
length: 11100 mm
width: 4600 mm
height: 4600 mm
accuracy: +/-0.1 mm
weight: 12000 kg

closed machine frame with integrated laser unit
laser unit: co2 laser, 5000 watts, frequency angeregt, cooling unit
logbook function laser
automatic pallet changer with longitudinal conveyor for small parts (waste)
drives: gantry drive in combination with direct linear drives
laser power control
hi-las high pressure cutting
plasmasensorik (pms)
fast processing with sprintlas
contourlas for making small holes
cutting gas pressure settings can be programmed
power cycles can be programmed
laser cutting head with 5 "lens
laser cutting head with 7.5 "lens
cutting head quick change facility
capacitive height control (slides)
process control system (pcs)
position lasers diode
microweld
automatic sheet metal outer edge detection
automatic focus position adjustment of autolas plus
oil spray setting for secure dickblechbeabeitung
automatic switch-off
lighting of workroom
multi-beam photoelectric beam guidance fully encapsulated + vented
monitoring system, multi chamber extraction + compact dust protection cabin
laser cutting heads with 3.75 "and 9" lens
conveyor with tilt tray
 LASER CUTTING MACHINE MANUFACTURER: TRUMPF TYPE: TRUMATIC L 3050 YEAR OF CONSTRUCTION: 2006 CONTROL: SIEMENS SINUMERIK 840 D HOURS OF OPERATION: 40.628 H / 19.636 H LASER POWER: 5000 WATT WORK AREA: 3000 X 1500 X 115 MM MAXIMUM SHEET THICKNESS/ST: 25 MM MAXIMUM SHEET THICKNESS/VA: 20 MM MAXIMUM SHEET THICKNESS/AL: 12 MM MAXIMUM SPEED: 200 / 300 M / MIN. LENGTH: 11100 MM WIDTH: 4600 MM HEIGHT: 4600 MM ACCURACY: +/-0.1 MM WEIGHT: 12000 KG CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT LASER UNIT: CO2 LASER, 5000 WATTS, FREQUENCY ANGEREGT, COOLING UNIT LOGBOOK FUNCTION LASER AUTOMATIC PALLET CHANGER WITH LONGITUDINAL CONVEYOR FOR SMALL PARTS (WASTE) DRIVES: GANTRY DRIVE IN COMBINATION WITH DIRECT LINEAR DRIVES LASER POWER CONTROL HI-LAS HIGH PRESSURE CUTTING PLASMASENSORIK (PMS) FAST PROCESSING WITH SPRINTLAS CONTOURLAS FOR MAKING SMALL HOLES CUTTING GAS PRESSURE SETTINGS CAN BE PROGRAMMED POWER CYCLES CAN BE PROGRAMMED LASER CUTTING HEAD WITH 5 "LENS LASER CUTTING HEAD WITH 7.5 "LENS CUTTING HEAD QUICK CHANGE FACILITY CAPACITIVE HEIGHT CONTROL (SLIDES) PROCESS CONTROL SYSTEM (PCS) POSITION LASERS DIODE MICROWELD AUTOMATIC SHEET METAL OUTER EDGE DETECTION AUTOMATIC FOCUS POSITION ADJUSTMENT OF AUTOLAS PLUS OIL SPRAY SETTING FOR SECURE DICKBLECHBEABEITUNG AUTOMATIC SWITCH-OFF LIGHTING OF WORKROOM MULTI-BEAM PHOTOELECTRIC BEAM GUIDANCE FULLY ENCAPSULATED + VENTED MONITORING SYSTEM, MULTI CHAMBER EXTRACTION + COMPACT DUST PROTECTION CABIN LASER CUTTING HEADS WITH 3.75 "AND 9" LENS CONVEYOR WITH TILT TRAY
Vendedor: METEC GmbH
Año de construcción: usado
Ubicación: Land-fixed side at the left<br/>feedspeed 18 - 25 m/min<br/>working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm<br/>panel overhang 30mm<br/>panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations)<br/>coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm<br/>coil diameter 830 mm<br/>equipment:<br/>squaring device with 2 motors each 3 kw<br/>edge heating<br/>edge magazine for 2 coils, guillotine for edges up to 3 mm<br/>glueing part a20 with quickmelt application<br/>lateral pressure zone k, 1 driven and 2 after pressing rollers<br/>end trims hl84, 2 motors each 0,8kw <br/>rough trimming, 2 motors 1,5kw<br/>contour trimming, 2 exchange units<br/>profile scraping pn10<br/>flat scrapers fa11<br/>buffing<br/>automation package straight/chamfer:<br/>-automatic adjustment infeed fence<br/>-automatic setting of pressure rollers<br/>-pneumatic setting of end trims<br/>-pneumatic setting of rough trims<br/>-automatic setting of chamfer/radius on the contour trims<br/>-pneumatic setting of profile and flat scraping  units<br/>-electronic height positioning FIXED SIDE AT THE LEFT
FEEDSPEED 18 - 25 M/MIN
WORKING WIDTH MIN 60MM FOR PANEL THICKNESS 22MM, 105MM FOR PANEL THICKNESS 40MM
PANEL OVERHANG 30MM
PANEL THICKNESS 8 - 60 MM IN STEAD OF 12 - 40 MM (WITH LIMITATIONS)
COIL EDGE THICKNESS: 0,3 - 3 MM, STRIPS 0,4 - 20 MM
COIL DIAMETER 830 MM
EQUIPMENT:
SQUARING DEVICE WITH 2 MOTORS EACH 3 KW
EDGE HEATING
EDGE MAGAZINE FOR 2 COILS, GUILLOTINE FOR EDGES UP TO 3 MM
GLUEING PART A20 WITH QUICKMELT APPLICATION
LATERAL PRESSURE ZONE K, 1 DRIVEN AND 2 AFTER PRESSING ROLLERS
END TRIMS HL84, 2 MOTORS EACH 0,8KW
ROUGH TRIMMING, 2 MOTORS 1,5KW
CONTOUR TRIMMING, 2 EXCHANGE UNITS
PROFILE SCRAPING PN10
FLAT SCRAPERS FA11
BUFFING
AUTOMATION PACKAGE STRAIGHT/CHAMFER:
-AUTOMATIC ADJUSTMENT INFEED FENCE
-AUTOMATIC SETTING OF PRESSURE ROLLERS
-PNEUMATIC SETTING OF END TRIMS
-PNEUMATIC SETTING OF ROUGH TRIMS
-AUTOMATIC SETTING OF CHAMFER/RADIUS ON THE CONTOUR TRIMS
-PNEUMATIC SETTING OF PROFILE AND FLAT SCRAPING UNITS
-ELECTRONIC HEIGHT POSITIONING
Vendedor: Vebim
Año de construcción: usado
Precio: 5.400 €
Ubicación: Land--40 [mm] roll shaft diameter,
-3 driving rolls,
-standard roll Ø165 [mm],
-70 x 1.5 [mm] round tube capacity,
-2? gas inches (3.2 mm) capacity,
-50 x 50 x 6 [mm] angle iron capacity,
-bending speeds 20% faster than competitive machines,
-forged roll shafts precision ground and fitted for maximum performance and minimal deflection,
-heavy duty structure and rigid components for high section modulus ratings,
-reinforced engineered mainframe design proven to outperform competitive models,
-patented by ercolina simultaneous downfeed and roll movement to minimize deformation,
-programmable touchpad controls with digital center roll positioning display,
-remote pendent with low voltage controls and foot pedal switch.
-power supply: 380-440 [v],
-motor: 1.85 [kw].

-dimensions: 650 x 102 x 148 [mm],
-weight: 300 [kg] approx.

are included:

-universal die / roll set,
-dies for round tubing bending : Ø 1 -40 [MM] ROLL SHAFT DIAMETER, -3 DRIVING ROLLS, -STANDARD ROLL Ø165 [MM], -70 X 1.5 [MM] ROUND TUBE CAPACITY, -2? GAS INCHES (3.2 MM) CAPACITY, -50 X 50 X 6 [MM] ANGLE IRON CAPACITY, -BENDING SPEEDS 20% FASTER THAN COMPETITIVE MACHINES, -FORGED ROLL SHAFTS PRECISION GROUND AND FITTED FOR MAXIMUM PERFORMANCE AND MINIMAL DEFLECTION, -HEAVY DUTY STRUCTURE AND RIGID COMPONENTS FOR HIGH SECTION MODULUS RATINGS, -REINFORCED ENGINEERED MAINFRAME DESIGN PROVEN TO OUTPERFORM COMPETITIVE MODELS, -PATENTED BY ERCOLINA SIMULTANEOUS DOWNFEED AND ROLL MOVEMENT TO MINIMIZE DEFORMATION, -PROGRAMMABLE TOUCHPAD CONTROLS WITH DIGITAL CENTER ROLL POSITIONING DISPLAY, -REMOTE PENDENT WITH LOW VOLTAGE CONTROLS AND FOOT PEDAL SWITCH. -POWER SUPPLY: 380-440 [V], -MOTOR: 1.85 [KW]. -DIMENSIONS: 650 X 102 X 148 [MM], -WEIGHT: 300 [KG] APPROX. ARE INCLUDED: -UNIVERSAL DIE / ROLL SET, -DIES FOR ROUND TUBING BENDING : Ø 1"1/4 (42.4 MM) + 1/2" (21.3 MM), -1 ERCOLINA SERVICE KEY, -1 SET OF PRECISION SPACERS FOR THE DIES. MACHINE IN PERFECT CONDITION, VISIBLE UNDER POWER FOR INSPECTION AND TRIAL. PRICE VAT EXCLUDED, EX WORKS LOADING ON TRUCK INCLUDED. SHIPPING IN FRANCE AND EUROPE IS POSSIBLE. MORE PICTURES AND DETAILS ON REQUEST.
Vendedor: SARL Kraffter
Año de construcción: usado
Ubicación: Land-working width: 3200 mm<br/>electronic setting of width<br/>equipment: <br/>1+1 scorer top<br/>1+1 scorer bottom<br/>1+1 hogger<br/>1+1 jump shaper 6000 r/min<br/>1+1 jump shaper 6000 r/min WORKING WIDTH: 3200 MM
ELECTRONIC SETTING OF WIDTH
EQUIPMENT:
1+1 SCORER TOP
1+1 SCORER BOTTOM
1+1 HOGGER
1+1 JUMP SHAPER 6000 R/MIN
1+1 JUMP SHAPER 6000 R/MIN
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-goodway
machine name  turning center
manufacturer  goodway
model gcl-2l
location transit
year of manufacturing 2001
technical specification:	
2 axis cnc turning centre 
400mm swing
220mm max machining diameter
600mm between centres
52mm bar capacity
4500rpm
12 station block turret
11kw spindle motor
fanuc otc control
programmable tailstock
swarf conveyor
8 GOODWAY MACHINE NAME TURNING CENTER MANUFACTURER GOODWAY MODEL GCL-2L LOCATION TRANSIT YEAR OF MANUFACTURING 2001 TECHNICAL SPECIFICATION: 2 AXIS CNC TURNING CENTRE 400MM SWING 220MM MAX MACHINING DIAMETER 600MM BETWEEN CENTRES 52MM BAR CAPACITY 4500RPM 12 STATION BLOCK TURRET 11KW SPINDLE MOTOR FANUC OTC CONTROL PROGRAMMABLE TAILSTOCK SWARF CONVEYOR 8" POWER CHUCK TOOL SETTER COOLANT
Vendedor: Syndicate Machines Pvt. Ltd.
Año de construcción: usado
Ubicación: Land-x-travel: 880 mm<br/>y-travel: 630 mm<br/>z-travel: 630 mm<br/>control: itnc 530  heidenhain<br/>main spindle::  <br/>turning speed range - main spindle: 20 - 18.000 min/-1<br/>power capacity - main spindel: 15 / 10 kw<br/>max. torque: 130 nm<br/>tool taper: sk 40 (iso 7388iib)<br/>swivellable: b: 103° <br/>work table::  <br/>table surface area: 1.250 x 700 mm<br/>rotary table dia.: 700 mm<br/>rotatable: c: 360 °<br/>max. table load: ca. 500 kg<br/>t-slots: 11x 14mm x 63mm <br/>tool magazin::  <br/>number of toolpositions: 32 (2x 16) pos.<br/>tool taper: sk 40 (iso 7388iib)<br/>max. tool diameter: 80 / 130 mm<br/>max. tool-dia with free toolbox: 160 mm<br/>max. tool length: 315 mm<br/>max. tool weight: 8,0 kg<br/>feeds::  <br/>feed speeds: 1 - 15.000 mm/min<br/>rapid traverse: 30 m/min<br/>total power requirement: 51 kva<br/>weight of the machine ca.: 8,0 t<br/>dimensions of the machine ca.: 4,0 x 4,0 x 2,5 m<br/>documents:  <br/>chip conveyor:  <br/>coolantsystem:  <br/>high pressure coolant: 17 bar <br/>coolant through spindle centre: ad <br/>turning milling head: nc <br/>nc-rotary table:  <br/>elektr. hand wheel:  <br/>rotary screen:  <br/>tool setting:  <br/>5 axis cnc - machiningcenter universal<br/>deckel maho - dmu 80 t<br/><br/>- nc-swivel-milling-head<br/>- nc-rotary-table integrated in fixed working-table<br/><br/><br/><br/><br/><br/><br/><br/> X-TRAVEL: 880 MM
Y-TRAVEL: 630 MM
Z-TRAVEL: 630 MM
CONTROL: ITNC 530 HEIDENHAIN
MAIN SPINDLE::
TURNING SPEED RANGE - MAIN SPINDLE: 20 - 18.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 15 / 10 KW
MAX. TORQUE: 130 NM
TOOL TAPER: SK 40 (ISO 7388IIB)
SWIVELLABLE: B: 103°
WORK TABLE::
TABLE SURFACE AREA: 1.250 X 700 MM
ROTARY TABLE DIA.: 700 MM
ROTATABLE: C: 360 °
MAX. TABLE LOAD: CA. 500 KG
T-SLOTS: 11X 14MM X 63MM
TOOL MAGAZIN::
NUMBER OF TOOLPOSITIONS: 32 (2X 16) POS.
TOOL TAPER: SK 40 (ISO 7388IIB)
MAX. TOOL DIAMETER: 80 / 130 MM
MAX. TOOL-DIA WITH FREE TOOLBOX: 160 MM
MAX. TOOL LENGTH: 315 MM
MAX. TOOL WEIGHT: 8,0 KG
FEEDS::
FEED SPEEDS: 1 - 15.000 MM/MIN
RAPID TRAVERSE: 30 M/MIN
TOTAL POWER REQUIREMENT: 51 KVA
WEIGHT OF THE MACHINE CA.: 8,0 T
DIMENSIONS OF THE MACHINE CA.: 4,0 X 4,0 X 2,5 M
DOCUMENTS:
CHIP CONVEYOR:
COOLANTSYSTEM:
HIGH PRESSURE COOLANT: 17 BAR
COOLANT THROUGH SPINDLE CENTRE: AD
TURNING MILLING HEAD: NC
NC-ROTARY TABLE:
ELEKTR. HAND WHEEL:
ROTARY SCREEN:
TOOL SETTING:
5 AXIS CNC - MACHININGCENTER UNIVERSAL
DECKEL MAHO - DMU 80 T

- NC-SWIVEL-MILLING-HEAD
- NC-ROTARY-TABLE INTEGRATED IN FIXED WORKING-TABLE







Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-punching-nibbling machine (medium format)
sma-ref-6405
category: punching nibbling machines
manufacturer: type: trumatic tc 260 rotation
year of construction: 1991
control: bosch
workspace:
250 kn
2,500 x 1,300 mm
sheet thickness: 6,4 mm
punching diameter: 76.2 mm
special features: 10 tool stations
incl. tool cassettes / scraper
condition: outdated
location: luxembourg
availability: immediately PUNCHING-NIBBLING MACHINE (MEDIUM FORMAT) SMA-REF-6405 CATEGORY: PUNCHING NIBBLING MACHINES MANUFACTURER: TYPE: TRUMATIC TC 260 ROTATION YEAR OF CONSTRUCTION: 1991 CONTROL: BOSCH WORKSPACE: 250 KN 2,500 X 1,300 MM SHEET THICKNESS: 6,4 MM PUNCHING DIAMETER: 76.2 MM SPECIAL FEATURES: 10 TOOL STATIONS INCL. TOOL CASSETTES / SCRAPER CONDITION: OUTDATED LOCATION: LUXEMBOURG AVAILABILITY: IMMEDIATELY
Vendedor: S-MA GmbH
Año de construcción: usado
Ubicación: Land-edge banding machine with modern zero-joint technology for standard edge materials with functional layer\r\n\r\nsingle sided edge banding machine\r\nbrand: homag\r\ntype: optimat kal 310/8/a20/s2\r\nyear: 2007\r\nstop on the left hand side\r\nwith workpiece return\r\n\r\ntechnical data:\r\n- feed 18 m/min\r\n- working height 950 mm\r\n- working width min.:\r\n55mm at workpiece thickness 22 mm, 100 mm at workpiece thickness 60 mm\r\n(depending on the workpiece length)\r\n- workpiece overhang 30 mm\r\n- workpiece thickness 12-60 mm\r\n- edge material coil 0,3-3 mm\r\n- edge cross sectional area max. at pvc 135 mm², at veneer 100 mm²\r\n- coil-Ø max. 830 mm\r\n\r\ntransport chain 80 m wide with rubbered top\r\ntop pressure with v-belt, motorical height adjustment and digital display\r\n\r\npower control pc22 with sps-control\r\n\r\npre-milling unit\r\n- 2 motors each 3 kw\r\n\r\nworkpiece pre-heating\r\n\r\nedge gluing: \r\nhot-air-system\r\nbrand: schugoma \r\ntype: kantenking \r\n- for edge material with functional layer \r\n- functional or reacting layer same colour as the edge material \r\n- dissolved the functional or reacting layer connects edge material and workpiece\r\n\r\nautom. adjusment of pressure zone\r\n1 driven pre-pressure roller, Ø 150 mm\r\n6 post-pressure roller, Ø 70 mm\r\n\r\nedge magazine 6 rollen\r\n- edge thickness 6x3 mm\r\n- coil-Ø 6x830\r\n- rest length monitoring at 2400 mm\r\n\r\nend trimming unit hl 04 / 05\r\nfor workpieces with surface layer overhang up to max. 10 mm\r\n\r\nfeed stepless controllable 18-25 m/min\r\n\r\nsliding table 500x1600 mm\r\n\r\nrough milling unit 1,5 kw\r\n- 2 motors each 1,5 kw, one above the other \r\n\r\nform milling unit fk 13, 8-fold automatical\r\n- 2 motors each 0,4 kw\r\n\r\n600 mm empty space\r\n\r\nmulti-post-cleaning device mn21 automatical\r\n\r\nfinish unit fa11 top / bottom\r\n- post-cleaning glued joint\r\n- cleaning agent application\r\n- buffing unit\r\n\r\nset up during the transport of the next workpiece, so the machine need not to be driven until there are no workpieces in it.\r\n\r\nworkpiece return:\r\nair cushion table: 2500 mm long, 1000 mm wide about approx. 60 mm inclined positioned\r\ntransport belt: wide 900 mm\r\nnot driven roller conveyor: length 2000 mm, width 900 mm\r\nextension of roller conveyor about 500 mm\r\noverhang: approx. 250 mm\r\n\r\nbelt cleaning, single-fold\r\n\r\nworkpieces:\r\nlength 300-2500 mm or. 300-800 mm\r\nwidth 60-800 mm or. 800-2000 mm\r\nthickness 8-60 mm\r\nweight max. 50 kg\r\n\r\nnote:\r\nthe specifications and descriptions are a copy of the order confirmation at that time. data are for information and are not binding. EDGE BANDING MACHINE WITH MODERN ZERO-JOINT TECHNOLOGY FOR STANDARD EDGE MATERIALS WITH FUNCTIONAL LAYER\R\N\R\NSINGLE SIDED EDGE BANDING MACHINE\R\NBRAND: HOMAG\R\NTYPE: OPTIMAT KAL 310/8/A20/S2\R\NYEAR: 2007\R\NSTOP ON THE LEFT HAND SIDE\R\NWITH WORKPIECE RETURN\R\N\R\NTECHNICAL DATA:\R\N- FEED 18 M/MIN\R\N- WORKING HEIGHT 950 MM\R\N- WORKING WIDTH MIN.:\R\N55MM AT WORKPIECE THICKNESS 22 MM, 100 MM AT WORKPIECE THICKNESS 60 MM\R\N(DEPENDING ON THE WORKPIECE LENGTH)\R\N- WORKPIECE OVERHANG 30 MM\R\N- WORKPIECE THICKNESS 12-60 MM\R\N- EDGE MATERIAL COIL 0,3-3 MM\R\N- EDGE CROSS SECTIONAL AREA MAX. AT PVC 135 MM², AT VENEER 100 MM²\R\N- COIL-Ø MAX. 830 MM\R\N\R\NTRANSPORT CHAIN 80 M WIDE WITH RUBBERED TOP\R\NTOP PRESSURE WITH V-BELT, MOTORICAL HEIGHT ADJUSTMENT AND DIGITAL DISPLAY\R\N\R\NPOWER CONTROL PC22 WITH SPS-CONTROL\R\N\R\NPRE-MILLING UNIT\R\N- 2 MOTORS EACH 3 KW\R\N\R\NWORKPIECE PRE-HEATING\R\N\R\NEDGE GLUING: \R\NHOT-AIR-SYSTEM\R\NBRAND: SCHUGOMA \R\NTYPE: KANTENKING \R\N- FOR EDGE MATERIAL WITH FUNCTIONAL LAYER \R\N- FUNCTIONAL OR REACTING LAYER SAME COLOUR AS THE EDGE MATERIAL \R\N- DISSOLVED THE FUNCTIONAL OR REACTING LAYER CONNECTS EDGE MATERIAL AND WORKPIECE\R\N\R\NAUTOM. ADJUSMENT OF PRESSURE ZONE\R\N1 DRIVEN PRE-PRESSURE ROLLER, Ø 150 MM\R\N6 POST-PRESSURE ROLLER, Ø 70 MM\R\N\R\NEDGE MAGAZINE 6 ROLLEN\R\N- EDGE THICKNESS 6X3 MM\R\N- COIL-Ø 6X830\R\N- REST LENGTH MONITORING AT 2400 MM\R\N\R\NEND TRIMMING UNIT HL 04 / 05\R\NFOR WORKPIECES WITH SURFACE LAYER OVERHANG UP TO MAX. 10 MM\R\N\R\NFEED STEPLESS CONTROLLABLE 18-25 M/MIN\R\N\R\NSLIDING TABLE 500X1600 MM\R\N\R\NROUGH MILLING UNIT 1,5 KW\R\N- 2 MOTORS EACH 1,5 KW, ONE ABOVE THE OTHER \R\N\R\NFORM MILLING UNIT FK 13, 8-FOLD AUTOMATICAL\R\N- 2 MOTORS EACH 0,4 KW\R\N\R\N600 MM EMPTY SPACE\R\N\R\NMULTI-POST-CLEANING DEVICE MN21 AUTOMATICAL\R\N\R\NFINISH UNIT FA11 TOP / BOTTOM\R\N- POST-CLEANING GLUED JOINT\R\N- CLEANING AGENT APPLICATION\R\N- BUFFING UNIT\R\N\R\NSET UP DURING THE TRANSPORT OF THE NEXT WORKPIECE, SO THE MACHINE NEED NOT TO BE DRIVEN UNTIL THERE ARE NO WORKPIECES IN IT.\R\N\R\NWORKPIECE RETURN:\R\NAIR CUSHION TABLE: 2500 MM LONG, 1000 MM WIDE ABOUT APPROX. 60 MM INCLINED POSITIONED\R\NTRANSPORT BELT: WIDE 900 MM\R\NNOT DRIVEN ROLLER CONVEYOR: LENGTH 2000 MM, WIDTH 900 MM\R\NEXTENSION OF ROLLER CONVEYOR ABOUT 500 MM\R\NOVERHANG: APPROX. 250 MM\R\N\R\NBELT CLEANING, SINGLE-FOLD\R\N\R\NWORKPIECES:\R\NLENGTH 300-2500 MM OR. 300-800 MM\R\NWIDTH 60-800 MM OR. 800-2000 MM\R\NTHICKNESS 8-60 MM\R\NWEIGHT MAX. 50 KG\R\N\R\NNOTE:\R\NTHE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATA ARE FOR INFORMATION AND ARE NOT BINDING.
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-cincinnati
machine name: tool n cutting grinding machine
manufacturer: cincinnati
model: monoset
location: mumbai
year of manufacturing: na
technical specification: 
swing over main slide 12 CINCINNATI MACHINE NAME: TOOL N CUTTING GRINDING MACHINE MANUFACTURER: CINCINNATI MODEL: MONOSET LOCATION: MUMBAI YEAR OF MANUFACTURING: NA TECHNICAL SPECIFICATION: SWING OVER MAIN SLIDE 12" DISTANCE SPINDLE NOSE TO TAIL CENTER 6" MAXIMUM WHEEL DIAMETER 3-1/2" MIN. & MAX. WORK COLLET 1/8" TO 1-1/4" LONGITUDINAL MAIN SLIDE TRAVEL 5-1/4" OFFSET SLIDE MOVEMENT 2-1/4"
Vendedor: Syndicate Machines Pvt. Ltd.
Año de construcción: usado
Ubicación: Land-amtec fillingsystem - small sample system for small volume bottle filling and capping<br><br>samples system to fill small bottles with small volume of liquid: typical use is filling of eye drops, nail polish and other. infeed by infeed line | possibly from an sorting system upstream (which is not included in this system). the system includes a container unscrambler, which sets the small bottles after the filling into an outfeed line. the system is plc controlled. <br><br>- specifications: max. speed of the machine in neutral: 50 bottles/minute | filling capacity: 20-60ml | 1.75kw | 6-8bar. all theses specifications are just examples. the final system will be custom-built. - please give us your detailed inquiry (container shape and size, speed , product to fill, working steps) to give you a full quotation.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FILLINGSYSTEM - SMALL SAMPLE SYSTEM FOR SMALL VOLUME BOTTLE FILLING AND CAPPING

SAMPLES SYSTEM TO FILL SMALL BOTTLES WITH SMALL VOLUME OF LIQUID: TYPICAL USE IS FILLING OF EYE DROPS, NAIL POLISH AND OTHER. INFEED BY INFEED LINE | POSSIBLY FROM AN SORTING SYSTEM UPSTREAM (WHICH IS NOT INCLUDED IN THIS SYSTEM). THE SYSTEM INCLUDES A CONTAINER UNSCRAMBLER, WHICH SETS THE SMALL BOTTLES AFTER THE FILLING INTO AN OUTFEED LINE. THE SYSTEM IS PLC CONTROLLED.

- SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 50 BOTTLES/MINUTE | FILLING CAPACITY: 20-60ML | 1.75KW | 6-8BAR. ALL THESES SPECIFICATIONS ARE JUST EXAMPLES. THE FINAL SYSTEM WILL BE CUSTOM-BUILT. - PLEASE GIVE US YOUR DETAILED INQUIRY (CONTAINER SHAPE AND SIZE, SPEED , PRODUCT TO FILL, WORKING STEPS) TO GIVE YOU A FULL QUOTATION.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Precio: 2.800 €
Ubicación: Land-used set up
int. machine number: m2748
manufacturer martin
type t 51

planing width 510 mm
task table length 1,400 mm
tax table length 1,100 mm
weight 850 kg
total length approx. 2.75 m
4-drum
slotted table lips
hydraulic table adjustment
with gauge and various knives

item location: 58730 frã¶ndenberg/ruhr

the machine can be visited like to see power and tried out.

we will gladly send you more photos by e-mail.

a forklift/crane for loading is available.

we reserve the right to a sale.

there is the way learned to examine suburb for sale articles. specific questions should be clarified in advance. the information, technical data, dimensions, year, condition are non-binding and were shown to the best of my knowledge and belief. errors are reserved. the warranty / guarantee is excluded. the goods will be sold from location / camp, with national transfer of risk to the buyer, this also applies to a shipping from us, which we have carried out on your behalf. this offer is only to traders, merchants and legal persons.
specified trade names, and trademarks are property of their owners and are used only for identification and description of products.

the structure and the electrical connection of the machine / the device must be carried out by a qualified person trained or checked.

see also my other offers.

the article must be paid unless otherwise agreed within 14 days of invoice creation and picked up.
otherwise, the cost of the storage charge must be made. USED SET UP INT. MACHINE NUMBER: M2748 MANUFACTURER MARTIN TYPE T 51 PLANING WIDTH 510 MM TASK TABLE LENGTH 1,400 MM TAX TABLE LENGTH 1,100 MM WEIGHT 850 KG TOTAL LENGTH APPROX. 2.75 M 4-DRUM SLOTTED TABLE LIPS HYDRAULIC TABLE ADJUSTMENT WITH GAUGE AND VARIOUS KNIVES ITEM LOCATION: 58730 FR&ATILDE;&PARA;NDENBERG/RUHR THE MACHINE CAN BE VISITED LIKE TO SEE POWER AND TRIED OUT. WE WILL GLADLY SEND YOU MORE PHOTOS BY E-MAIL. A FORKLIFT/CRANE FOR LOADING IS AVAILABLE. WE RESERVE THE RIGHT TO A SALE. THERE IS THE WAY LEARNED TO EXAMINE SUBURB FOR SALE ARTICLES. SPECIFIC QUESTIONS SHOULD BE CLARIFIED IN ADVANCE. THE INFORMATION, TECHNICAL DATA, DIMENSIONS, YEAR, CONDITION ARE NON-BINDING AND WERE SHOWN TO THE BEST OF MY KNOWLEDGE AND BELIEF. ERRORS ARE RESERVED. THE WARRANTY / GUARANTEE IS EXCLUDED. THE GOODS WILL BE SOLD FROM LOCATION / CAMP, WITH NATIONAL TRANSFER OF RISK TO THE BUYER, THIS ALSO APPLIES TO A SHIPPING FROM US, WHICH WE HAVE CARRIED OUT ON YOUR BEHALF. THIS OFFER IS ONLY TO TRADERS, MERCHANTS AND LEGAL PERSONS. SPECIFIED TRADE NAMES, AND TRADEMARKS ARE PROPERTY OF THEIR OWNERS AND ARE USED ONLY FOR IDENTIFICATION AND DESCRIPTION OF PRODUCTS. THE STRUCTURE AND THE ELECTRICAL CONNECTION OF THE MACHINE / THE DEVICE MUST BE CARRIED OUT BY A QUALIFIED PERSON TRAINED OR CHECKED. SEE ALSO MY OTHER OFFERS. THE ARTICLE MUST BE PAID UNLESS OTHERWISE AGREED WITHIN 14 DAYS OF INVOICE CREATION AND PICKED UP. OTHERWISE, THE COST OF THE STORAGE CHARGE MUST BE MADE.
Vendedor: Fritz Ernst Maschinenhandel e K
Año de construcción: usado
Ubicación: Land-amtec fillingsystem - sample system for small volume bottle filling<br><br>samples system to fill small bottles with small volume of liquid: typical use is filling of eye drops. the system includes an container unscrambler, which sets the small bottles into an infeed line. module to clean the bottles (water/gas) and inside/outside tucks (cap parts), filling and labelling the bottles. the system is plc controlled. the total 3 cleaning processes with water plus the 3 cleaning processes with gas assures a very high cleaning standard without any water remaining. all liquid touching parts are made of stainless steel ss316 completely. <br><br>- specifications: filling precision: less than +/- 0.5% | max. speed of the machine in neutral: 120 bottles/minute | filling capacity: 5-30ml | 380v, 3.8kw | 6bar. all these specifications only are sample specifications. depending on the final working process they will vary. - please give us your detailed inquiry (container shape and size, speed , product to fill, working steps) to give you a full quotation.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FILLINGSYSTEM - SAMPLE SYSTEM FOR SMALL VOLUME BOTTLE FILLING

SAMPLES SYSTEM TO FILL SMALL BOTTLES WITH SMALL VOLUME OF LIQUID: TYPICAL USE IS FILLING OF EYE DROPS. THE SYSTEM INCLUDES AN CONTAINER UNSCRAMBLER, WHICH SETS THE SMALL BOTTLES INTO AN INFEED LINE. MODULE TO CLEAN THE BOTTLES (WATER/GAS) AND INSIDE/OUTSIDE TUCKS (CAP PARTS), FILLING AND LABELLING THE BOTTLES. THE SYSTEM IS PLC CONTROLLED. THE TOTAL 3 CLEANING PROCESSES WITH WATER PLUS THE 3 CLEANING PROCESSES WITH GAS ASSURES A VERY HIGH CLEANING STANDARD WITHOUT ANY WATER REMAINING. ALL LIQUID TOUCHING PARTS ARE MADE OF STAINLESS STEEL SS316 COMPLETELY.

- SPECIFICATIONS: FILLING PRECISION: LESS THAN +/- 0.5% | MAX. SPEED OF THE MACHINE IN NEUTRAL: 120 BOTTLES/MINUTE | FILLING CAPACITY: 5-30ML | 380V, 3.8KW | 6BAR. ALL THESE SPECIFICATIONS ONLY ARE SAMPLE SPECIFICATIONS. DEPENDING ON THE FINAL WORKING PROCESS THEY WILL VARY. - PLEASE GIVE US YOUR DETAILED INQUIRY (CONTAINER SHAPE AND SIZE, SPEED , PRODUCT TO FILL, WORKING STEPS) TO GIVE YOU A FULL QUOTATION.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-spindle moulder with swinging spindle gomad dfdk - 5
manufacturer gomad
model / machine type dfdk - 5
year of production 1997
category of machines. spindle moulder with tilting spindle
location

gorzów wlkp.
conditions of delivery

own collection
cost of delivery

customer cover
start type

to be agreed
description
comments

the milling body houses two spindles in its interior. the spindles made of alloy steel are mounted in bearings in a special version enabling operation at high speeds. each spindle is mounted in a cylindrical housing, which, together with the motor, is moved vertically. a cast-iron table with two rotating discs is attached to the upper part of the body. a cutter guard with guides and sawdust extraction is mounted on each disc, which can be moved and rotated by 360 °. parameter values ??units
spindle revolutions 3000, 4500, 6000, 9000 rpm.
vertical spindle travel 90 mm / min.
spindle spacing 760 mm
spindle seat morse taper no. 5 -
engine 2x4,5 / 5.9 kw
height from the table plane 850 mm
weight 850 kg
special equipment: - -
milling cutters short after 2 sets 25, 30 mm
device for plug-in fn-25 1 set. - -
arm bracket 1 set - -
angle guide 1 set - -
milling mandrel, long 1 set 25 mm
milling mandrel, long 12 sets 30 mm SPINDLE MOULDER WITH SWINGING SPINDLE GOMAD DFDK - 5 MANUFACTURER GOMAD MODEL / MACHINE TYPE DFDK - 5 YEAR OF PRODUCTION 1997 CATEGORY OF MACHINES. SPINDLE MOULDER WITH TILTING SPINDLE LOCATION GORZóW WLKP. CONDITIONS OF DELIVERY OWN COLLECTION COST OF DELIVERY CUSTOMER COVER START TYPE TO BE AGREED DESCRIPTION COMMENTS THE MILLING BODY HOUSES TWO SPINDLES IN ITS INTERIOR. THE SPINDLES MADE OF ALLOY STEEL ARE MOUNTED IN BEARINGS IN A SPECIAL VERSION ENABLING OPERATION AT HIGH SPEEDS. EACH SPINDLE IS MOUNTED IN A CYLINDRICAL HOUSING, WHICH, TOGETHER WITH THE MOTOR, IS MOVED VERTICALLY. A CAST-IRON TABLE WITH TWO ROTATING DISCS IS ATTACHED TO THE UPPER PART OF THE BODY. A CUTTER GUARD WITH GUIDES AND SAWDUST EXTRACTION IS MOUNTED ON EACH DISC, WHICH CAN BE MOVED AND ROTATED BY 360 °. PARAMETER VALUES ??UNITS SPINDLE REVOLUTIONS 3000, 4500, 6000, 9000 RPM. VERTICAL SPINDLE TRAVEL 90 MM / MIN. SPINDLE SPACING 760 MM SPINDLE SEAT MORSE TAPER NO. 5 - ENGINE 2X4,5 / 5.9 KW HEIGHT FROM THE TABLE PLANE 850 MM WEIGHT 850 KG SPECIAL EQUIPMENT: - - MILLING CUTTERS SHORT AFTER 2 SETS 25, 30 MM DEVICE FOR PLUG-IN FN-25 1 SET. - - ARM BRACKET 1 SET - - ANGLE GUIDE 1 SET - - MILLING MANDREL, LONG 1 SET 25 MM MILLING MANDREL, LONG 12 SETS 30 MM
Vendedor: PPHU Lignum Przemysław Kretowicz
Año de construcción: usado
Ubicación: Land-amtec horizonpack mini premade pouch filler 18m (gusset bag, quad seal bag)<br><br>horizontally working premade pouch packaging machine, suitable for gusset and quad-seal bags. bag detections sensors are checking if the bag is placed right and fully opened. the product infeed chute allows immediate pouch filling after the bag is detected and keeps the sealing area free from contamination at the same time. a special gripper system assures the right bag position during the filling process before the bag is closed and sealed. mitsubishi plc, delta touchscreen, piab vacuum generator, omron pid temperature control, airtac cylinder. - technical specifications: stainless steel version (ss304) | max. speed of the machine in neutral: 18 cycles/minute | bag length: 80-200mm | bag width: 200-430 | compressed air: 0.5m³/min, 6.5bar | power: 220v, 1.5kw.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC HORIZONPACK MINI PREMADE POUCH FILLER 18M (GUSSET BAG, QUAD SEAL BAG)

HORIZONTALLY WORKING PREMADE POUCH PACKAGING MACHINE, SUITABLE FOR GUSSET AND QUAD-SEAL BAGS. BAG DETECTIONS SENSORS ARE CHECKING IF THE BAG IS PLACED RIGHT AND FULLY OPENED. THE PRODUCT INFEED CHUTE ALLOWS IMMEDIATE POUCH FILLING AFTER THE BAG IS DETECTED AND KEEPS THE SEALING AREA FREE FROM CONTAMINATION AT THE SAME TIME. A SPECIAL GRIPPER SYSTEM ASSURES THE RIGHT BAG POSITION DURING THE FILLING PROCESS BEFORE THE BAG IS CLOSED AND SEALED. MITSUBISHI PLC, DELTA TOUCHSCREEN, PIAB VACUUM GENERATOR, OMRON PID TEMPERATURE CONTROL, AIRTAC CYLINDER. - TECHNICAL SPECIFICATIONS: STAINLESS STEEL VERSION (SS304) | MAX. SPEED OF THE MACHINE IN NEUTRAL: 18 CYCLES/MINUTE | BAG LENGTH: 80-200MM | BAG WIDTH: 200-430 | COMPRESSED AIR: 0.5M³/MIN, 6.5BAR | POWER: 220V, 1.5KW.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Precio: 9.250 €
Ubicación: Land-core d20a, lathe comes from a training workshop (total 3 machines are available of this type) state very well, with
guard / not cleaned off and glass scales and digital display of mitutoyo, central lubrication system, guided tours and refinished, dovetail guides at the flat after scraped, set games.
mechanics tested new, paint, chip wall back, chip tray below, guard with emergency off, tailstock, 3 jaw chuck, little water, chuck key, lighting
tip height 200 mm, centre distance 1000 mm, max.drehdurchmesser 600 mm, over bed 420 mm, over carriage bed width 260 mm, 300 mm,.
sale only to professionals
used, tested - so how you is, can be tested under power and visited
under exclusion of any warranty and guarantee there second-hand machine

free loading on trucks from location, shipment arrangement, placement and set up on request possible
available immediately CORE D20A, LATHE COMES FROM A TRAINING WORKSHOP (TOTAL 3 MACHINES ARE AVAILABLE OF THIS TYPE) STATE VERY WELL, WITH GUARD / NOT CLEANED OFF AND GLASS SCALES AND DIGITAL DISPLAY OF MITUTOYO, CENTRAL LUBRICATION SYSTEM, GUIDED TOURS AND REFINISHED, DOVETAIL GUIDES AT THE FLAT AFTER SCRAPED, SET GAMES. MECHANICS TESTED NEW, PAINT, CHIP WALL BACK, CHIP TRAY BELOW, GUARD WITH EMERGENCY OFF, TAILSTOCK, 3 JAW CHUCK, LITTLE WATER, CHUCK KEY, LIGHTING TIP HEIGHT 200 MM, CENTRE DISTANCE 1000 MM, MAX.DREHDURCHMESSER 600 MM, OVER BED 420 MM, OVER CARRIAGE BED WIDTH 260 MM, 300 MM,. SALE ONLY TO PROFESSIONALS USED, TESTED - SO HOW YOU IS, CAN BE TESTED UNDER POWER AND VISITED UNDER EXCLUSION OF ANY WARRANTY AND GUARANTEE THERE SECOND-HAND MACHINE FREE LOADING ON TRUCKS FROM LOCATION, SHIPMENT ARRANGEMENT, PLACEMENT AND SET UP ON REQUEST POSSIBLE AVAILABLE IMMEDIATELY
Vendedor: R.S.E cnc Maschinenservice
Año de construcción: usado
Ubicación: dimensions of the machine ca.:31 m
weight of the machine ca.:21,5 t
connected load:100 kw
amperage - max.:160 a
mode of operation:4
number of working hours:370 h
working spindel hours:112 h
fd-spindle hours:50 h
measuring probe:renishaw powerprobe 60 optical (omp 60) hsk-a 100
:blum - lasercontrol nt-h 3d
:40 bar
spray gun:1 bar
3d quickset:
tropic package:
deckel maho paket mdynamics:
control siemens for loading station:
electronic handwheel siemens 840 d:
mps machine protection control:
cleaninstation hsk:
cooling unit blow air through spindle:
chip conveyor:

klick on the video button upper above to see the machining video on youtube..gif" alt="Land-x-travel:1250 mm
y-travel:1250 mm
z-travel:1000 mm
tool magazin::120
tool taper:hsk-a 100
rotary-table:1100 mm
speed of turning table:500 u/min
set of change pallet:2 stück
a-axis:hsk-a 100
number of spindle speeds:12.000 u/min
power of spindle (motorspindle):52 / 430 kw / nm
:3000/3800 watt(heiz-/kühlleistung)
control for loadingstation:siemens(tft 8\")
dimensions of the machine ca.:31 m
weight of the machine ca.:21,5 t
connected load:100 kw
amperage - max.:160 a
mode of operation:4
number of working hours:370 h
working spindel hours:112 h
fd-spindle hours:50 h
measuring probe:renishaw powerprobe 60 optical (omp 60) hsk-a 100
:blum - lasercontrol nt-h 3d
:40 bar
spray gun:1 bar
3d quickset:
tropic package:
deckel maho paket mdynamics:
control siemens for loading station:
electronic handwheel siemens 840 d:
mps machine protection control:
cleaninstation hsk:
cooling unit blow air through spindle:
chip conveyor:

klick on the video button upper above to see the machining video on youtube." style="height: 18px;"> X-TRAVEL:1250 MM
Y-TRAVEL:1250 MM
Z-TRAVEL:1000 MM
TOOL MAGAZIN::120
TOOL TAPER:HSK-A 100
ROTARY-TABLE:1100 MM
SPEED OF TURNING TABLE:500 U/MIN
SET OF CHANGE PALLET:2 STüCK
A-AXIS:HSK-A 100
NUMBER OF SPINDLE SPEEDS:12.000 U/MIN
POWER OF SPINDLE (MOTORSPINDLE):52 / 430 KW / NM
:3000/3800 WATT(HEIZ-/KüHLLEISTUNG)
CONTROL FOR LOADINGSTATION:SIEMENS(TFT 8\")
DIMENSIONS OF THE MACHINE CA.:31 M
WEIGHT OF THE MACHINE CA.:21,5 T
CONNECTED LOAD:100 KW
AMPERAGE - MAX.:160 A
MODE OF OPERATION:4
NUMBER OF WORKING HOURS:370 H
WORKING SPINDEL HOURS:112 H
FD-SPINDLE HOURS:50 H
MEASURING PROBE:RENISHAW POWERPROBE 60 OPTICAL (OMP 60) HSK-A 100
:BLUM - LASERCONTROL NT-H 3D
:40 BAR
SPRAY GUN:1 BAR
3D QUICKSET:
TROPIC PACKAGE:
DECKEL MAHO PAKET MDYNAMICS:
CONTROL SIEMENS FOR LOADING STATION:
ELECTRONIC HANDWHEEL SIEMENS 840 D:
MPS MACHINE PROTECTION CONTROL:
CLEANINSTATION HSK:
COOLING UNIT BLOW AIR THROUGH SPINDLE:
CHIP CONVEYOR:

KLICK ON THE VIDEO BUTTON UPPER ABOVE TO SEE THE MACHINING VIDEO ON YOUTUBE.
Vendedor: VIG CNC & Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-technical data
 tip height 110 mm
 centre distance 300 mm
 swing over cross slide 115 mm
 spindle bore 32 mm
 sled:
 longitudinal travel (z axis) 295 mm
 plan travel (x-axis) 220 mm
 turret slide: number 1
 number of positions revolver 8
 sleeve diameter 35 mm
 spindle retainer: camlock
 spindle speeds:
 continuously variable from 30 rpm to 6000 rpm
 tailstock quill recording:
 morse taper 2 mk
 quill stroke 100 mm
 feeds: continuously variable
 length of 0.1 mm / min up to 5000 mm/min
 map of 0.1 mm / min up to 5000 mm/min
 rapid traverse 10 m / min
 kw spindle motor 5.50
 connection 50 hz 3 x 380 volt
 machine weight 1350 kg
 dimensions machine:
 length 1700 mm
 1942 mm wide
 1774 mm

miscellaneous accessories:
 lighting
 coolant system
 splash guard cabin complete
 central lubrication system
 electronic handwheel
 interface rs 232
 c axis with interpolation
 chip conveyor
 tool holder set
 driven tool holders
 collet chucks
 bucher TECHNICAL DATA TIP HEIGHT 110 MM CENTRE DISTANCE 300 MM SWING OVER CROSS SLIDE 115 MM SPINDLE BORE 32 MM SLED: LONGITUDINAL TRAVEL (Z AXIS) 295 MM PLAN TRAVEL (X-AXIS) 220 MM TURRET SLIDE: NUMBER 1 NUMBER OF POSITIONS REVOLVER 8 SLEEVE DIAMETER 35 MM SPINDLE RETAINER: CAMLOCK SPINDLE SPEEDS: CONTINUOUSLY VARIABLE FROM 30 RPM TO 6000 RPM TAILSTOCK QUILL RECORDING: MORSE TAPER 2 MK QUILL STROKE 100 MM FEEDS: CONTINUOUSLY VARIABLE LENGTH OF 0.1 MM / MIN UP TO 5000 MM/MIN MAP OF 0.1 MM / MIN UP TO 5000 MM/MIN RAPID TRAVERSE 10 M / MIN KW SPINDLE MOTOR 5.50 CONNECTION 50 HZ 3 X 380 VOLT MACHINE WEIGHT 1350 KG DIMENSIONS MACHINE: LENGTH 1700 MM 1942 MM WIDE 1774 MM MISCELLANEOUS ACCESSORIES: LIGHTING COOLANT SYSTEM SPLASH GUARD CABIN COMPLETE CENTRAL LUBRICATION SYSTEM ELECTRONIC HANDWHEEL INTERFACE RS 232 C AXIS WITH INTERPOLATION CHIP CONVEYOR TOOL HOLDER SET DRIVEN TOOL HOLDERS COLLET CHUCKS BUCHER
Vendedor: Maschinenhandel Eersel
Año de construcción: usado
Ubicación: Land-weight approx.: 11330 kg<br/>dimensions (l x w x h) approx.: 7120 x 2390 x 3210 mm<br/>description: <h3><b>volvo l70d wheel loader with solid rubber wheels</b></h3> <br> <h3>transmission</h3> - transmission type: volvo ht 90<br> - number of forward gears: 4<br> - number of reverse gears: 4<br> - max. forward speed: 43.9 km/h<br> - max. reverse speed: 43.9 km/h<br> <br> <h3>shovel</h3> - breakaway torque: 19540 pounds<br> - discharge floor clearance at max. delivery height: 2880 mm<br> - width of shovel: 2500 mm<br> - bucket capacity heaped: 1.9 m3<br> <br> <h3>engine</h3> - manufacturer: volvo<br> - model: td 63 kge<br> - effective power: 91 kw<br> - total power: 95.4 kw<br> - power measured at: 2200 rpm<br> - cubic capacity: 5.5 l<br> - torque measured at: 1100 rpm<br> - max. torque: 595 nm<br> - number of cylinders: 6<br> - suction: turbocharger with intercooler<br> <br> <h3>dimensions</h3> - length with shovel at ground level: 7120 mm<br> - width between tires: 2390 mm<br> - height to upper part of cabin: 3210 mm<br> - ground clearance: 430 mm<br> - wheelbase: 2840 mm<br> - max. height of the joint axis: 3880 mm<br> - projection at max. lifting height and unloading: 960 mm<br> <br> <h3>hydraulic system</h3> - pump type: two axial piston pumps<br> - pressure of overflow valve: 26000.1 kpa<br> - flow capacity of the pump: 160.1 l/min<br> - lifting time: 5.4 sec<br> - discharge time: 1.1 sec<br> - setback time: 3 sec<br> <br> <h3>operation</h3> - operating weight: 11330.7 kg<br> - fuel volume: 190 l<br> - fluid volume of the hydraulic system: 65 l<br> - engine oil volume: 16 l<br> - liquid volume of the cooling system: 40 l<br> - fluid volume of the transmission: 17 l<br> - fluid volume of the front axle/differential: 24 l<br> - fluid volume of the rear axle/differential: 24 l<br> - static tipping weight: 8731.7 kg<br> - swivel radius: 5565 mm<br> - working voltage: 24 v<br> - generator current power: 60 ampere<br> - pendulum travel of the rear axle: 26 degrees<br> WEIGHT APPROX.: 11330 KG
DIMENSIONS (L X W X H) APPROX.: 7120 X 2390 X 3210 MM
DESCRIPTION:

VOLVO L70D WHEEL LOADER WITH SOLID RUBBER WHEELS


TRANSMISSION

- TRANSMISSION TYPE: VOLVO HT 90
- NUMBER OF FORWARD GEARS: 4
- NUMBER OF REVERSE GEARS: 4
- MAX. FORWARD SPEED: 43.9 KM/H
- MAX. REVERSE SPEED: 43.9 KM/H

SHOVEL

- BREAKAWAY TORQUE: 19540 POUNDS
- DISCHARGE FLOOR CLEARANCE AT MAX. DELIVERY HEIGHT: 2880 MM
- WIDTH OF SHOVEL: 2500 MM
- BUCKET CAPACITY HEAPED: 1.9 M3

ENGINE

- MANUFACTURER: VOLVO
- MODEL: TD 63 KGE
- EFFECTIVE POWER: 91 KW
- TOTAL POWER: 95.4 KW
- POWER MEASURED AT: 2200 RPM
- CUBIC CAPACITY: 5.5 L
- TORQUE MEASURED AT: 1100 RPM
- MAX. TORQUE: 595 NM
- NUMBER OF CYLINDERS: 6
- SUCTION: TURBOCHARGER WITH INTERCOOLER

DIMENSIONS

- LENGTH WITH SHOVEL AT GROUND LEVEL: 7120 MM
- WIDTH BETWEEN TIRES: 2390 MM
- HEIGHT TO UPPER PART OF CABIN: 3210 MM
- GROUND CLEARANCE: 430 MM
- WHEELBASE: 2840 MM
- MAX. HEIGHT OF THE JOINT AXIS: 3880 MM
- PROJECTION AT MAX. LIFTING HEIGHT AND UNLOADING: 960 MM

HYDRAULIC SYSTEM

- PUMP TYPE: TWO AXIAL PISTON PUMPS
- PRESSURE OF OVERFLOW VALVE: 26000.1 KPA
- FLOW CAPACITY OF THE PUMP: 160.1 L/MIN
- LIFTING TIME: 5.4 SEC
- DISCHARGE TIME: 1.1 SEC
- SETBACK TIME: 3 SEC

OPERATION

- OPERATING WEIGHT: 11330.7 KG
- FUEL VOLUME: 190 L
- FLUID VOLUME OF THE HYDRAULIC SYSTEM: 65 L
- ENGINE OIL VOLUME: 16 L
- LIQUID VOLUME OF THE COOLING SYSTEM: 40 L
- FLUID VOLUME OF THE TRANSMISSION: 17 L
- FLUID VOLUME OF THE FRONT AXLE/DIFFERENTIAL: 24 L
- FLUID VOLUME OF THE REAR AXLE/DIFFERENTIAL: 24 L
- STATIC TIPPING WEIGHT: 8731.7 KG
- SWIVEL RADIUS: 5565 MM
- WORKING VOLTAGE: 24 V
- GENERATOR CURRENT POWER: 60 AMPERE
- PENDULUM TRAVEL OF THE REAR AXLE: 26 DEGREES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-technical data:
	 
	-ease of use
-grinding process by means of geared motor
-drills dimensions 3-50 mm
-angle of the spitz 90-140 â°
-adjustable angle
	-grinding motor 400 v / 0.25 kw
	-geared motor for swinging 400 v / 0.12 kw
-grinding wheel dimensions 175 x 22 x 20/90 mm
	-space requirement approx.	         b t 810 x 570 x h 1260 mm
-weight approx.					  120 kg
-with - clamping device
		 -before setting device
 TECHNICAL DATA: -EASE OF USE -GRINDING PROCESS BY MEANS OF GEARED MOTOR -DRILLS DIMENSIONS 3-50 MM -ANGLE OF THE SPITZ 90-140 &ACIRC;&DEG; -ADJUSTABLE ANGLE -GRINDING MOTOR 400 V / 0.25 KW -GEARED MOTOR FOR SWINGING 400 V / 0.12 KW -GRINDING WHEEL DIMENSIONS 175 X 22 X 20/90 MM -SPACE REQUIREMENT APPROX. B T 810 X 570 X H 1260 MM -WEIGHT APPROX. 120 KG -WITH - CLAMPING DEVICE -BEFORE SETTING DEVICE
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-splicing machine with glue thread\r\nmake: casati\r\ntype: z 2000\r\n\r\ntechnical details:\r\n\r\narm length: 1.200 mm\r\nveneer thickness: 0,4 - 2 mm\r\nfeed speed: approx. 5 - 40 m/min.\r\nnoise measurement: 73,5 db\r\ncompressed air consumption: 0,05 l/min\r\nworking pressure: 6-8 bar \r\noverall dimensions: 2.050 x 600 x 1.400 mm\r\n\r\nthis model is specially designed for the users requiring high production and considerable working speed also when using difficult materials.\r\n\r\n- stepless change of heater oscillation angular \r\n  speed, independent of the linear feeding speed\r\n- accurate adjustment of the feeding friction \r\n  pressure\r\n- adjustment of the starting point and stop point\r\n- thread heating by electric resistance \r\n- amperometer on the control panel for an accurate \r\n  adjustment of the heating temperature\r\n- zig-zag height adjustment\r\n- automatic breaking of the thread\r\n- all functions are operated on the control panel\r\n- compressed air connection is required\r\n- spool with thermoadhesive thread, 1 pc. pliers, 1 set of 20 needles, 0,5 l of antiadhesive liquid\r\n\r\n SPLICING MACHINE WITH GLUE THREAD\R\NMAKE: CASATI\R\NTYPE: Z 2000\R\N\R\NTECHNICAL DETAILS:\R\N\R\NARM LENGTH: 1.200 MM\R\NVENEER THICKNESS: 0,4 - 2 MM\R\NFEED SPEED: APPROX. 5 - 40 M/MIN.\R\NNOISE MEASUREMENT: 73,5 DB\R\NCOMPRESSED AIR CONSUMPTION: 0,05 L/MIN\R\NWORKING PRESSURE: 6-8 BAR \R\NOVERALL DIMENSIONS: 2.050 X 600 X 1.400 MM\R\N\R\NTHIS MODEL IS SPECIALLY DESIGNED FOR THE USERS REQUIRING HIGH PRODUCTION AND CONSIDERABLE WORKING SPEED ALSO WHEN USING DIFFICULT MATERIALS.\R\N\R\N- STEPLESS CHANGE OF HEATER OSCILLATION ANGULAR \R\N SPEED, INDEPENDENT OF THE LINEAR FEEDING SPEED\R\N- ACCURATE ADJUSTMENT OF THE FEEDING FRICTION \R\N PRESSURE\R\N- ADJUSTMENT OF THE STARTING POINT AND STOP POINT\R\N- THREAD HEATING BY ELECTRIC RESISTANCE \R\N- AMPEROMETER ON THE CONTROL PANEL FOR AN ACCURATE \R\N ADJUSTMENT OF THE HEATING TEMPERATURE\R\N- ZIG-ZAG HEIGHT ADJUSTMENT\R\N- AUTOMATIC BREAKING OF THE THREAD\R\N- ALL FUNCTIONS ARE OPERATED ON THE CONTROL PANEL\R\N- COMPRESSED AIR CONNECTION IS REQUIRED\R\N- SPOOL WITH THERMOADHESIVE THREAD, 1 PC. PLIERS, 1 SET OF 20 NEEDLES, 0,5 L OF ANTIADHESIVE LIQUID\R\N\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-technical data:
	 
	-ease of use
-grinding process by means of geared motor
-drills dimensions 3-50 mm
-angle of the spitz 90-140 â°
-adjustable angle
	-grinding motor 400 v / 0.25 kw
	-geared motor for swinging 400 v / 0.12 kw
-grinding wheel dimensions 175 x 22 x 20/90 x 20 mm
	-space requirement approx.	 		 b t 810 x 570 x h 1260 mm
-weight approx.					  	  120 kg
-with - clamping device
		 -before setting device
 TECHNICAL DATA: -EASE OF USE -GRINDING PROCESS BY MEANS OF GEARED MOTOR -DRILLS DIMENSIONS 3-50 MM -ANGLE OF THE SPITZ 90-140 &ACIRC;&DEG; -ADJUSTABLE ANGLE -GRINDING MOTOR 400 V / 0.25 KW -GEARED MOTOR FOR SWINGING 400 V / 0.12 KW -GRINDING WHEEL DIMENSIONS 175 X 22 X 20/90 X 20 MM -SPACE REQUIREMENT APPROX. B T 810 X 570 X H 1260 MM -WEIGHT APPROX. 120 KG -WITH - CLAMPING DEVICE -BEFORE SETTING DEVICE
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: 19.830 €
Ubicación: Land-: 1.250 x 2.500 mm<br/>: 120 mm<br/>: 12 mm<br/>: 25 mm<br/>: 4 mm<br/>: 6 mm<br/>: 1/10 unter  mm<br/>: . 470 ca l<br/>: 3.060 mm<br/>: 1.760 mm<br/>: 1.500 mm<br/>: 500 kg<br/>compressed air powered plasma source hypertherm powermax 45<br/>cnc-workbench software (external pc not included)<br/>adjustable rollers<br/>precision profile rail guide (hiwin)<br/>zero backlash htd drive belt<br/>driven by step motors<br/>solid frame construction<br/>seperate renewable support grate<br/>water trough to catch flying sparks<br/>swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height<br/>hand operation unit for comfortable processing and set up on the workpiece<br/>users manual in german<br/>complies with the ce regulations<br/><br/><br/>plamacut 2512 with alternative plasma sources:<br/><br/><br/>    hypertherm pmx<br/>65 pmx<br/>85 pmx<br/>105 pmx<br/>125   plasma type comp. air comp. air comp. air comp. air   plunge power  16 mm  20 mm  22 mm  25 mm   separating cut  32 mm  38 mm  44 mm  55 mm   recommended thickness<br/>(unalloyed steel)  6 mm  16 mm  19 mm  25 mm   max. thickness<br/>(unalloyed steel)  16 mm  20 mm  22 mm  32 mm   price<br/> ? 21.120,- ? 22.420,- ? 24.100,- ? 26.940,-   <br/><br/>(kjellberg plasma sources available on request)<br/><br/><br/>options:<br/><br/><br/>   water tank to quickly fill and drain the trough ? 2.670,-   height adjustment by arc voltage ? 2.220,-   set-up laser ? 220,-   pneumatic marking arbor ? 680,-   pneumatic engraver ? 1.700,-   suction bridge (preparation for suction Ø 160 mm,<br/>wimportant for zinc-plated- and thin sheets) ? 840,-   suction- and filter unit caremaster ifa 1,1 kw,<br/>fan power 2.500 m³/h ? 2.150,-   <br/><br/><br/><br/>working area: 1.250 x 2.500 mm<br/>height of bridge opening: 120 mm<br/>plasma source: hypertherm powermax 45<br/>plunge power: 12 mm<br/>separating cut: 25 mm<br/>recommended thickness (unalloyed steel): 4 mm<br/>max. thickness (unalloyed steel): 6 mm<br/>electrical power: 45 a 50% power-on time, 32 a 100% power-on time<br/>rapid speed: 24 m/min<br/>repeatable accuracy: under 1/10 mm<br/>max. unit mass: 500 kg/m²<br/>volume water trough: ca. 470 l<br/>length: 3.060 mm<br/>width: 1.760 mm<br/>height: 1.500 mm<br/>weight: 500 kg<br/><br/><br/><br/> : 1.250 X 2.500 MM
: 120 MM
: 12 MM
: 25 MM
: 4 MM
: 6 MM
: 1/10 UNTER MM
: . 470 CA L
: 3.060 MM
: 1.760 MM
: 1.500 MM
: 500 KG
COMPRESSED AIR POWERED PLASMA SOURCE HYPERTHERM POWERMAX 45
CNC-WORKBENCH SOFTWARE (EXTERNAL PC NOT INCLUDED)
ADJUSTABLE ROLLERS
PRECISION PROFILE RAIL GUIDE (HIWIN)
ZERO BACKLASH HTD DRIVE BELT
DRIVEN BY STEP MOTORS
SOLID FRAME CONSTRUCTION
SEPERATE RENEWABLE SUPPORT GRATE
WATER TROUGH TO CATCH FLYING SPARKS
SWIMMING BURNER BEARING IN COMBINATION WITH EXCHANGEABLE SLIDE SCREWS, ENABLES CONSTANT CUTTING HEIGHT
HAND OPERATION UNIT FOR COMFORTABLE PROCESSING AND SET UP ON THE WORKPIECE
USERS MANUAL IN GERMAN
COMPLIES WITH THE CE REGULATIONS


PLAMACUT 2512 WITH ALTERNATIVE PLASMA SOURCES:


 HYPERTHERM PMX
65 PMX
85 PMX
105 PMX
125 PLASMA TYPE COMP. AIR COMP. AIR COMP. AIR COMP. AIR PLUNGE POWER  16 MM  20 MM  22 MM  25 MM SEPARATING CUT  32 MM  38 MM  44 MM  55 MM RECOMMENDED THICKNESS
(UNALLOYED STEEL)  6 MM  16 MM  19 MM  25 MM MAX. THICKNESS
(UNALLOYED STEEL)  16 MM  20 MM  22 MM  32 MM PRICE
? 21.120,- ? 22.420,- ? 24.100,- ? 26.940,-

(KJELLBERG PLASMA SOURCES AVAILABLE ON REQUEST)


OPTIONS:


WATER TANK TO QUICKLY FILL AND DRAIN THE TROUGH ? 2.670,- HEIGHT ADJUSTMENT BY ARC VOLTAGE ? 2.220,- SET-UP LASER ? 220,- PNEUMATIC MARKING ARBOR ? 680,- PNEUMATIC ENGRAVER ? 1.700,- SUCTION BRIDGE (PREPARATION FOR SUCTION Ø 160 MM,
WIMPORTANT FOR ZINC-PLATED- AND THIN SHEETS) ? 840,- SUCTION- AND FILTER UNIT CAREMASTER IFA 1,1 KW,
FAN POWER 2.500 M³/H ? 2.150,-



WORKING AREA: 1.250 X 2.500 MM
HEIGHT OF BRIDGE OPENING: 120 MM
PLASMA SOURCE: HYPERTHERM POWERMAX 45
PLUNGE POWER: 12 MM
SEPARATING CUT: 25 MM
RECOMMENDED THICKNESS (UNALLOYED STEEL): 4 MM
MAX. THICKNESS (UNALLOYED STEEL): 6 MM
ELECTRICAL POWER: 45 A 50% POWER-ON TIME, 32 A 100% POWER-ON TIME
RAPID SPEED: 24 M/MIN
REPEATABLE ACCURACY: UNDER 1/10 MM
MAX. UNIT MASS: 500 KG/M²
VOLUME WATER TROUGH: CA. 470 L
LENGTH: 3.060 MM
WIDTH: 1.760 MM
HEIGHT: 1.500 MM
WEIGHT: 500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-
cnc multi-axis turning - milling center with portal machine's group: cnc turning and milling center
manufacturer: okuma
type: lt 25 m 2pcs 300 year of build: 1999
control: osp 7000 l with igf one touch
power-on hours: 80239 h
cutting time: 16516 h
country of origin: japan
delivery time: please enquire
cargo base: exw

technical data rotary diameter: 300 mm
turning length: 300 mm
control: osp 7000 l with igf one touch
distance between centers: 1524 mm
swing over bed: 500 mm

main spindle:

speed range - main spindle: 30-3800 u / min
drive power - main spindle: 22 kw
spindle bore: 65 mm part hollow voltage c-axis: 0.001 â°

counter spindle:

rpm - spindle: 30-3.000 u/min
drive performance - counter spindle: 22 kw
c-axis: 0.001 â°

turret:

number of turret: 2
number of tool stations: 2 x 12 positions
number of driven tool stations: 2 x 12 positions
speed range - angetr. number of tool stations: 50 â?? 4500 min-1
m power tools: 3,7 kw
max torque: 22.5 nm
chuck: vdi 40
total power consumption: 60.2 kva
machine weight approx.  : 13 t
space requirement approx.

additional features - chip conveyor

-coolant system with high pressure

-interface extraction system - interface for rod loader

-interface for portal

-renishaw measurement switch on upper turret for workpiece measuring - tool measuring 2 x (touch setter) manual

-automatic doors - preparation oil mist extraction - loading and enladeportal pneumotec with stack magazine psm 100 with safety fence

-separate measuring station - various tool holder + powered holder - 2 x hydraulic 3-jaw power chuck - chuck + measuring sensor blow with air - documentation 

 CNC MULTI-AXIS TURNING - MILLING CENTER WITH PORTAL MACHINE'S GROUP: CNC TURNING AND MILLING CENTER MANUFACTURER: OKUMA TYPE: LT 25 M 2PCS 300 YEAR OF BUILD: 1999 CONTROL: OSP 7000 L WITH IGF ONE TOUCH POWER-ON HOURS: 80239 H CUTTING TIME: 16516 H COUNTRY OF ORIGIN: JAPAN DELIVERY TIME: PLEASE ENQUIRE CARGO BASE: EXW TECHNICAL DATA ROTARY DIAMETER: 300 MM TURNING LENGTH: 300 MM CONTROL: OSP 7000 L WITH IGF ONE TOUCH DISTANCE BETWEEN CENTERS: 1524 MM SWING OVER BED: 500 MM MAIN SPINDLE: SPEED RANGE - MAIN SPINDLE: 30-3800 U / MIN DRIVE POWER - MAIN SPINDLE: 22 KW SPINDLE BORE: 65 MM PART HOLLOW VOLTAGE C-AXIS: 0.001 &ACIRC;&DEG; COUNTER SPINDLE: RPM - SPINDLE: 30-3.000 U/MIN DRIVE PERFORMANCE - COUNTER SPINDLE: 22 KW C-AXIS: 0.001 &ACIRC;&DEG; TURRET: NUMBER OF TURRET: 2 NUMBER OF TOOL STATIONS: 2 X 12 POSITIONS NUMBER OF DRIVEN TOOL STATIONS: 2 X 12 POSITIONS SPEED RANGE - ANGETR. NUMBER OF TOOL STATIONS: 50 &ACIRC;?? 4500 MIN-1 M POWER TOOLS: 3,7 KW MAX TORQUE: 22.5 NM CHUCK: VDI 40 TOTAL POWER CONSUMPTION: 60.2 KVA MACHINE WEIGHT APPROX. : 13 T SPACE REQUIREMENT APPROX. ADDITIONAL FEATURES - CHIP CONVEYOR -COOLANT SYSTEM WITH HIGH PRESSURE -INTERFACE EXTRACTION SYSTEM - INTERFACE FOR ROD LOADER -INTERFACE FOR PORTAL -RENISHAW MEASUREMENT SWITCH ON UPPER TURRET FOR WORKPIECE MEASURING - TOOL MEASURING 2 X (TOUCH SETTER) MANUAL -AUTOMATIC DOORS - PREPARATION OIL MIST EXTRACTION - LOADING AND ENLADEPORTAL PNEUMOTEC WITH STACK MAGAZINE PSM 100 WITH SAFETY FENCE -SEPARATE MEASURING STATION - VARIOUS TOOL HOLDER + POWERED HOLDER - 2 X HYDRAULIC 3-JAW POWER CHUCK - CHUCK + MEASURING SENSOR BLOW WITH AIR - DOCUMENTATION
Vendedor: RG-Tools GmbH
Año de construcción: usado
Precio: 22.350 €
Ubicación: Land-: 1.500 x 3.000 mm<br/>: 120 mm<br/>: 12 mm<br/>: 25 mm<br/>: 4 mm<br/>: 6 mm<br/>: 1/10 unter  mm<br/>: . 630 ca l<br/>: 3.560 mm<br/>: 1.960 mm<br/>: 1.500 mm<br/>: 650 kg<br/>compressed air powered plasma source hypertherm powermax 45<br/>cnc-workbench software (external pc not included)<br/>adjustable rollers<br/>precision profile rail guide (hiwin)<br/>zero backlash htd drive belt<br/>driven by step motors<br/>solid frame construction<br/>seperate renewable support grate<br/>water trough to catch flying sparks<br/>swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height<br/>hand operation unit for comfortable processing and set up on the workpiece<br/>users manual in german<br/>complies with the ce regulations<br/><br/><br/>plamacut 3015 with alternative plasma sources:<br/><br/><br/>    hypertherm pmx<br/>65 pmx<br/>85 pmx<br/>105 pmx<br/>125 maxpro<br/>200*   plasma type comp. air comp. air comp. air comp. air oxygen   plunge power  16 mm  20 mm  22 mm  25 mm  32 mm   separating cut  32 mm  38 mm  44 mm  55 mm  75 mm   recommended thickness<br/>(unalloyed steel)  6 mm  16 mm  19 mm  25 mm  32 mm   max. thickness<br/>(unalloyed steel)  16 mm  20 mm  22 mm  32 mm  50 mm   price<br/> ? 23.640,- ? 24.950,- ? 26.530,- ? 29.460,- ? 41.930,-   <br/><br/>*plasma gas oxygen, additionally shield gas (air, nitrogen)<br/><br/>(kjellberg plasma sources available on request)<br/><br/><br/>options:<br/><br/><br/>   water tank to quickly fill and drain the trough ? 2.980,-   height adjustment by arc voltage ? 2.220,-   set-up laser ? 220,-   pneumatic marking arbor ? 680,-   pneumatic engraver ? 1.700,-   suction bridge (preparation for suction Ø 160 mm,<br/>wimportant for zinc-plated- and thin sheets) ? 840,-   suction- and filter unit caremaster ifa 1,1 kw,<br/>fan power 2.500 m³/h ? 2.150,-   <br/><br/><br/><br/>working area: 1.500 x 3.000 mm<br/>height of bridge opening: 120 mm<br/>plasma source: hypertherm powermax 45<br/>plunge power: 12 mm<br/>separating cut: 25 mm<br/>recommended thickness (unalloyed steel): 4 mm<br/>max. thickness (unalloyed steel): 6 mm<br/>electrical power: 45 a 50% power-on time, 32 a 100% power-on time<br/>rapid speed: 24 m/min<br/>repeatable accuracy: under 1/10 mm<br/>max. unit mass: 400 kg/m²<br/>volume water trough: ca. 630 l<br/>length: 3.560 mm<br/>width: 1.960 mm<br/>height: 1.500 mm<br/>weight: 650 kg<br/><br/><br/><br/> : 1.500 X 3.000 MM
: 120 MM
: 12 MM
: 25 MM
: 4 MM
: 6 MM
: 1/10 UNTER MM
: . 630 CA L
: 3.560 MM
: 1.960 MM
: 1.500 MM
: 650 KG
COMPRESSED AIR POWERED PLASMA SOURCE HYPERTHERM POWERMAX 45
CNC-WORKBENCH SOFTWARE (EXTERNAL PC NOT INCLUDED)
ADJUSTABLE ROLLERS
PRECISION PROFILE RAIL GUIDE (HIWIN)
ZERO BACKLASH HTD DRIVE BELT
DRIVEN BY STEP MOTORS
SOLID FRAME CONSTRUCTION
SEPERATE RENEWABLE SUPPORT GRATE
WATER TROUGH TO CATCH FLYING SPARKS
SWIMMING BURNER BEARING IN COMBINATION WITH EXCHANGEABLE SLIDE SCREWS, ENABLES CONSTANT CUTTING HEIGHT
HAND OPERATION UNIT FOR COMFORTABLE PROCESSING AND SET UP ON THE WORKPIECE
USERS MANUAL IN GERMAN
COMPLIES WITH THE CE REGULATIONS


PLAMACUT 3015 WITH ALTERNATIVE PLASMA SOURCES:


 HYPERTHERM PMX
65 PMX
85 PMX
105 PMX
125 MAXPRO
200* PLASMA TYPE COMP. AIR COMP. AIR COMP. AIR COMP. AIR OXYGEN PLUNGE POWER  16 MM  20 MM  22 MM  25 MM  32 MM SEPARATING CUT  32 MM  38 MM  44 MM  55 MM  75 MM RECOMMENDED THICKNESS
(UNALLOYED STEEL)  6 MM  16 MM  19 MM  25 MM  32 MM MAX. THICKNESS
(UNALLOYED STEEL)  16 MM  20 MM  22 MM  32 MM  50 MM PRICE
? 23.640,- ? 24.950,- ? 26.530,- ? 29.460,- ? 41.930,-

*PLASMA GAS OXYGEN, ADDITIONALLY SHIELD GAS (AIR, NITROGEN)

(KJELLBERG PLASMA SOURCES AVAILABLE ON REQUEST)


OPTIONS:


WATER TANK TO QUICKLY FILL AND DRAIN THE TROUGH ? 2.980,- HEIGHT ADJUSTMENT BY ARC VOLTAGE ? 2.220,- SET-UP LASER ? 220,- PNEUMATIC MARKING ARBOR ? 680,- PNEUMATIC ENGRAVER ? 1.700,- SUCTION BRIDGE (PREPARATION FOR SUCTION Ø 160 MM,
WIMPORTANT FOR ZINC-PLATED- AND THIN SHEETS) ? 840,- SUCTION- AND FILTER UNIT CAREMASTER IFA 1,1 KW,
FAN POWER 2.500 M³/H ? 2.150,-



WORKING AREA: 1.500 X 3.000 MM
HEIGHT OF BRIDGE OPENING: 120 MM
PLASMA SOURCE: HYPERTHERM POWERMAX 45
PLUNGE POWER: 12 MM
SEPARATING CUT: 25 MM
RECOMMENDED THICKNESS (UNALLOYED STEEL): 4 MM
MAX. THICKNESS (UNALLOYED STEEL): 6 MM
ELECTRICAL POWER: 45 A 50% POWER-ON TIME, 32 A 100% POWER-ON TIME
RAPID SPEED: 24 M/MIN
REPEATABLE ACCURACY: UNDER 1/10 MM
MAX. UNIT MASS: 400 KG/M²
VOLUME WATER TROUGH: CA. 630 L
LENGTH: 3.560 MM
WIDTH: 1.960 MM
HEIGHT: 1.500 MM
WEIGHT: 650 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-1 5-axis baz dmg-mori
traverse path x/y/z 400 mm x 400 mm x 375 mm
control siemens sinumerik 840 d solution line with reading-mill
motor spindle sk 40 with 20 14 000 rpm
nc rotary table b-axis-5 â° up to + 110 â°
c axis 360 â°
chain magazine with 30 tool stations heat exchangers for spindle and table
infrared touch probe heidenhain ts 649
spã¤nnefã¶rderer, mode 4 electr. handwheel installed software for 3d quick set
 1 5-AXIS BAZ DMG-MORI TRAVERSE PATH X/Y/Z 400 MM X 400 MM X 375 MM CONTROL SIEMENS SINUMERIK 840 D SOLUTION LINE WITH READING-MILL MOTOR SPINDLE SK 40 WITH 20 14 000 RPM NC ROTARY TABLE B-AXIS-5 &ACIRC;&DEG; UP TO + 110 &ACIRC;&DEG; C AXIS 360 &ACIRC;&DEG; CHAIN MAGAZINE WITH 30 TOOL STATIONS HEAT EXCHANGERS FOR SPINDLE AND TABLE INFRARED TOUCH PROBE HEIDENHAIN TS 649 SP&ATILDE;&CURREN;NNEF&ATILDE;&PARA;RDERER, MODE 4 ELECTR. HANDWHEEL INSTALLED SOFTWARE FOR 3D QUICK SET
Vendedor: Luhan Werkzeugmaschinen
Año de construcción: usado
Precio: 17.770 €
Ubicación: Land-: 1.000 x 2.000 mm<br/>: 120 mm<br/>: 12 mm<br/>: 25 mm<br/>: 4 mm<br/>: 6 mm<br/>: 1/10 unter  mm<br/>: . 300 ca l<br/>: 2.560 mm<br/>: 1.460 mm<br/>: 1.500 mm<br/>: 400 kg<br/>compressed air powered plasma source hypertherm powermax 45<br/>cnc-workbench software (external pc not included)<br/>adjustable rollers<br/>precision profile rail guide (hiwin)<br/>zero backlash htd drive belt<br/>driven by step motors<br/>solid frame construction<br/>seperate renewable support grate<br/>water trough to catch flying sparks<br/>swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height<br/>hand operation unit for comfortable processing and set up on the workpiece<br/>users manual in german<br/>complies with the ce regulations<br/><br/><br/>plamacut 2010 with alternative plasma sources:<br/><br/><br/>    hypertherm pmx<br/>65 pmx<br/>85 pmx<br/>105 pmx<br/>125   plasma type comp. air comp. air comp. air comp. air   plunge power  16 mm  20 mm  22 mm  25 mm   separating cut  32 mm  38 mm  44 mm  55 mm   recommended thickness<br/>(unalloyed steel)  6 mm  16 mm  19 mm  25 mm   max. thickness<br/>(unalloyed steel)  16 mm  20 mm  22 mm  32 mm   price<br/> ? 19.070,- ? 20.370,- ? 21.970,- ? 24.880,-   <br/><br/>(kjellberg plasma sources available on request)<br/><br/><br/>options:<br/><br/><br/>   water tank to quickly fill and drain the trough ? 2.270,-   height adjustment by arc voltage ? 2.220,-   set-up laser ? 220,-   pneumatic marking arbor ? 680,-   pneumatic engraver ? 1.700,-   suction bridge (preparation for suction Ø 160 mm,<br/>wimportant for zinc-plated- and thin sheets) ? 840,-   suction- and filter unit caremaster ifa 1,1 kw,<br/>fan power 2.500 m³/h ? 2.150,-   <br/><br/><br/><br/>working area: 1.000 x 2.000 mm<br/>height of bridge opening: 120 mm<br/>plasma source: hypertherm powermax 45<br/>plunge power: 12 mm<br/>separating cut: 25 mm<br/>recommended thickness (unalloyed steel): 4 mm<br/>max. thickness (unalloyed steel): 6 mm<br/>electrical power: 45 a 50% power-on time, 32 a 100% power-on time<br/>rapid speed: 24 m/min<br/>repeatable accuracy: under 1/10 mm<br/>max. unit mass: 400 kg/m²<br/>volume water trough: ca. 300 l<br/>length: 2.560 mm<br/>width: 1.460 mm<br/>height: 1.500 mm<br/>weight: 400 kg<br/><br/><br/><br/> : 1.000 X 2.000 MM
: 120 MM
: 12 MM
: 25 MM
: 4 MM
: 6 MM
: 1/10 UNTER MM
: . 300 CA L
: 2.560 MM
: 1.460 MM
: 1.500 MM
: 400 KG
COMPRESSED AIR POWERED PLASMA SOURCE HYPERTHERM POWERMAX 45
CNC-WORKBENCH SOFTWARE (EXTERNAL PC NOT INCLUDED)
ADJUSTABLE ROLLERS
PRECISION PROFILE RAIL GUIDE (HIWIN)
ZERO BACKLASH HTD DRIVE BELT
DRIVEN BY STEP MOTORS
SOLID FRAME CONSTRUCTION
SEPERATE RENEWABLE SUPPORT GRATE
WATER TROUGH TO CATCH FLYING SPARKS
SWIMMING BURNER BEARING IN COMBINATION WITH EXCHANGEABLE SLIDE SCREWS, ENABLES CONSTANT CUTTING HEIGHT
HAND OPERATION UNIT FOR COMFORTABLE PROCESSING AND SET UP ON THE WORKPIECE
USERS MANUAL IN GERMAN
COMPLIES WITH THE CE REGULATIONS


PLAMACUT 2010 WITH ALTERNATIVE PLASMA SOURCES:


 HYPERTHERM PMX
65 PMX
85 PMX
105 PMX
125 PLASMA TYPE COMP. AIR COMP. AIR COMP. AIR COMP. AIR PLUNGE POWER  16 MM  20 MM  22 MM  25 MM SEPARATING CUT  32 MM  38 MM  44 MM  55 MM RECOMMENDED THICKNESS
(UNALLOYED STEEL)  6 MM  16 MM  19 MM  25 MM MAX. THICKNESS
(UNALLOYED STEEL)  16 MM  20 MM  22 MM  32 MM PRICE
? 19.070,- ? 20.370,- ? 21.970,- ? 24.880,-

(KJELLBERG PLASMA SOURCES AVAILABLE ON REQUEST)


OPTIONS:


WATER TANK TO QUICKLY FILL AND DRAIN THE TROUGH ? 2.270,- HEIGHT ADJUSTMENT BY ARC VOLTAGE ? 2.220,- SET-UP LASER ? 220,- PNEUMATIC MARKING ARBOR ? 680,- PNEUMATIC ENGRAVER ? 1.700,- SUCTION BRIDGE (PREPARATION FOR SUCTION Ø 160 MM,
WIMPORTANT FOR ZINC-PLATED- AND THIN SHEETS) ? 840,- SUCTION- AND FILTER UNIT CAREMASTER IFA 1,1 KW,
FAN POWER 2.500 M³/H ? 2.150,-



WORKING AREA: 1.000 X 2.000 MM
HEIGHT OF BRIDGE OPENING: 120 MM
PLASMA SOURCE: HYPERTHERM POWERMAX 45
PLUNGE POWER: 12 MM
SEPARATING CUT: 25 MM
RECOMMENDED THICKNESS (UNALLOYED STEEL): 4 MM
MAX. THICKNESS (UNALLOYED STEEL): 6 MM
ELECTRICAL POWER: 45 A 50% POWER-ON TIME, 32 A 100% POWER-ON TIME
RAPID SPEED: 24 M/MIN
REPEATABLE ACCURACY: UNDER 1/10 MM
MAX. UNIT MASS: 400 KG/M²
VOLUME WATER TROUGH: CA. 300 L
LENGTH: 2.560 MM
WIDTH: 1.460 MM
HEIGHT: 1.500 MM
WEIGHT: 400 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-guide and spindle lathe knuth dm 1000 b

year of construction: 1985
spindle bore: 46 mm
top width: 1000 mm
max turning diameter: 350 mm
speed range: 25-1600 rpm with the following accessories:

multifix tool holder with 2 inserts
coolant system
3 jaw chuck 0 200 mm
four-jaw chuck with 2 set of jaws
table feed
lynette running with
fixed lynette
2 revolving centres
3 fixed center points
1 drill chuck
1 set of turning tools
operating instructions GUIDE AND SPINDLE LATHE KNUTH DM 1000 B YEAR OF CONSTRUCTION: 1985 SPINDLE BORE: 46 MM TOP WIDTH: 1000 MM MAX TURNING DIAMETER: 350 MM SPEED RANGE: 25-1600 RPM WITH THE FOLLOWING ACCESSORIES: MULTIFIX TOOL HOLDER WITH 2 INSERTS COOLANT SYSTEM 3 JAW CHUCK 0 200 MM FOUR-JAW CHUCK WITH 2 SET OF JAWS TABLE FEED LYNETTE RUNNING WITH FIXED LYNETTE 2 REVOLVING CENTRES 3 FIXED CENTER POINTS 1 DRILL CHUCK 1 SET OF TURNING TOOLS OPERATING INSTRUCTIONS
Vendedor: Martin Beschle Werkzeuge & Maschinen GmbH
Año de construcción: usado
Ubicación: Land-x-travel:1050 mm<br/>y-travel:600 mm<br/>z-travel:530 mm<br/>table-size:1100x600 mm<br/>t-slots:18x5 (breite x anz.) mm<br/>max. table load:800 kg<br/>distance spindle center to table:100-600 mm<br/>rapid traverse in x-y-z axis:48/48/48 m<br/>milling feed range:1-12.000 mm/min<br/>spindle speed:10.000 1/min<br/>spindle taper:40 bt<br/>spindle drive:10 (riemen) kw<br/>positioning accuracy: mm<br/>repeating accuracy: mm<br/>tool changer:30 fach<br/>max. tool weight:7 kg<br/>tool diameter:89 (voll)/125 (leer) mm<br/>workpiece length:250 mm<br/>dimensions:2780x2500x2810 mm<br/>weight of the machine ca.:7,1 t<br/>cnc controller:heidenhain tnc620 (mc1620) <br/>chip conveyor with chip bucket: <br/>automatic tool changer:30 fach<br/>signal lamp: <br/>halogen lamp: <br/>coolant system: <br/>water gun: <br/>rigid tapping: <br/>foundation: <br/>ce-design: <br/>metric, 400v 50hz 3 phase: <br/>: <br/>fully enclosed: <br/>tool setter:option von blum <br/>automatic lubrication system: <br/>inner coolant:20 bar <br/>linear guide: <br/>mpg hand wheel: <br/>: <br/>air conditioner for cabinet: <br/>spindle oil cooler: <br/>chip conveyor:typ schnecke im maschinenbett, 2 stück <br/><br/>factory-new, immediately available, vertical cnc machining center with:  1. control system heidenhain tnc620 (mc1620) 2. working table size 1100 × 600 mm 3. x/y/z axis stroke 1050/600/530 mm 4. x/y/z axis rapid traverse 48/48/48 m/min 5. spindle motor 7.5 (qan 200l) 6. spindle speed 8000 rpm (belt-driven type) 7. spindle nose nt#40 (bt40) 8. atc capacity 24 tools 9. standard splash guard 10. manual pulse generator 11. coolant unit 12. rigid tapping 13. without transformer (power source 380v) 14. auger type chips screws inside of machine bed 15. machine color tongtai grey/blue 16. tricolor light 17. heidenhain warranty options: 1. ce mark 2. spindle speed 10.000 rpm, 10kw qan 200l (belt driven type) 3. spindle cooler 4. coolant through spindle with high pressure pump (20 bar) filtersystem type a 5. full splash cover 6. atc tool capacity 30 tools 7. a/c for electrical cabinet 8. manual guide i function + 10.4\ X-TRAVEL:1050 MM
Y-TRAVEL:600 MM
Z-TRAVEL:530 MM
TABLE-SIZE:1100X600 MM
T-SLOTS:18X5 (BREITE X ANZ.) MM
MAX. TABLE LOAD:800 KG
DISTANCE SPINDLE CENTER TO TABLE:100-600 MM
RAPID TRAVERSE IN X-Y-Z AXIS:48/48/48 M
MILLING FEED RANGE:1-12.000 MM/MIN
SPINDLE SPEED:10.000 1/MIN
SPINDLE TAPER:40 BT
SPINDLE DRIVE:10 (RIEMEN) KW
POSITIONING ACCURACY: MM
REPEATING ACCURACY: MM
TOOL CHANGER:30 FACH
MAX. TOOL WEIGHT:7 KG
TOOL DIAMETER:89 (VOLL)/125 (LEER) MM
WORKPIECE LENGTH:250 MM
DIMENSIONS:2780X2500X2810 MM
WEIGHT OF THE MACHINE CA.:7,1 T
CNC CONTROLLER:HEIDENHAIN TNC620 (MC1620)
CHIP CONVEYOR WITH CHIP BUCKET:
AUTOMATIC TOOL CHANGER:30 FACH
SIGNAL LAMP:
HALOGEN LAMP:
COOLANT SYSTEM:
WATER GUN:
RIGID TAPPING:
FOUNDATION:
CE-DESIGN:
METRIC, 400V 50HZ 3 PHASE:
:
FULLY ENCLOSED:
TOOL SETTER:OPTION VON BLUM
AUTOMATIC LUBRICATION SYSTEM:
INNER COOLANT:20 BAR
LINEAR GUIDE:
MPG HAND WHEEL:
:
AIR CONDITIONER FOR CABINET:
SPINDLE OIL COOLER:
CHIP CONVEYOR:TYP SCHNECKE IM MASCHINENBETT, 2 STüCK

FACTORY-NEW, IMMEDIATELY AVAILABLE, VERTICAL CNC MACHINING CENTER WITH: 1. CONTROL SYSTEM HEIDENHAIN TNC620 (MC1620) 2. WORKING TABLE SIZE 1100 × 600 MM 3. X/Y/Z AXIS STROKE 1050/600/530 MM 4. X/Y/Z AXIS RAPID TRAVERSE 48/48/48 M/MIN 5. SPINDLE MOTOR 7.5 (QAN 200L) 6. SPINDLE SPEED 8000 RPM (BELT-DRIVEN TYPE) 7. SPINDLE NOSE NT#40 (BT40) 8. ATC CAPACITY 24 TOOLS 9. STANDARD SPLASH GUARD 10. MANUAL PULSE GENERATOR 11. COOLANT UNIT 12. RIGID TAPPING 13. WITHOUT TRANSFORMER (POWER SOURCE 380V) 14. AUGER TYPE CHIPS SCREWS INSIDE OF MACHINE BED 15. MACHINE COLOR TONGTAI GREY/BLUE 16. TRICOLOR LIGHT 17. HEIDENHAIN WARRANTY OPTIONS: 1. CE MARK 2. SPINDLE SPEED 10.000 RPM, 10KW QAN 200L (BELT DRIVEN TYPE) 3. SPINDLE COOLER 4. COOLANT THROUGH SPINDLE WITH HIGH PRESSURE PUMP (20 BAR) FILTERSYSTEM TYPE A 5. FULL SPLASH COVER 6. ATC TOOL CAPACITY 30 TOOLS 7. A/C FOR ELECTRICAL CABINET 8. MANUAL GUIDE I FUNCTION + 10.4\" LCD MONITOR 9. CHIP CONVEYOR H=1100 MM WITH TROLLEY (CHAIN TYPE) OUR TAIWANESE SUPPLIER IS THE LARGEST MANUFACTURER IN TAIWAN AND ALSO BUILDS LATHES AND MACHINING CENTERS FOR WELL-KNOWN JAPANESE MANUFACTURERS. THE DELIVERY WAREHOUSE IS IN THE NETHERLANDS. WE CARRY OUT THE PERSONNEL SERVICE FOR THESE MACHINES. SPARE PARTS ARE AVAILABLE IN THE NETHERLANDS AND CAN BE DELIVERED AT SHORT NOTICE. HOWEVER, WE ARE THE FIRST POINT OF CONTACT IN ALL MATTERS, WHETHER IT IS DELIVERY, ASSEMBLY / COMMISSIONING, TRAINING OR AFTER-SALES SERVICE. FURTHER DATA CAN BE FOUND IN THE ANNEXES. BENEFIT FROM THE FAVORABLE LEASING AND HIRE-PURCHASE CONDITIONS OF ABC LEASING: ASK US ABOUT IT! INSTALLATION AND SERVICE POSSIBLE BY QUALIFIED PERSONNEL.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-guide and spindle lathe knuth dm 1000 b

year of construction: 1985
spindle bore: 46 mm
top width: 1000 mm
max turning diameter: 350 mm
speed range: 25-1600 rpm with the following accessories:

multifix tool holder with 2 inserts
coolant system
3 jaw chuck 0 200 mm
four-jaw chuck with 2 set of jaws
table feed
lynette running with
fixed lynette
2 revolving centres
3 fixed center points
1 drill chuck
1 set of turning tools
operating instructions GUIDE AND SPINDLE LATHE KNUTH DM 1000 B YEAR OF CONSTRUCTION: 1985 SPINDLE BORE: 46 MM TOP WIDTH: 1000 MM MAX TURNING DIAMETER: 350 MM SPEED RANGE: 25-1600 RPM WITH THE FOLLOWING ACCESSORIES: MULTIFIX TOOL HOLDER WITH 2 INSERTS COOLANT SYSTEM 3 JAW CHUCK 0 200 MM FOUR-JAW CHUCK WITH 2 SET OF JAWS TABLE FEED LYNETTE RUNNING WITH FIXED LYNETTE 2 REVOLVING CENTRES 3 FIXED CENTER POINTS 1 DRILL CHUCK 1 SET OF TURNING TOOLS OPERATING INSTRUCTIONS
Vendedor: Martin Beschle Werkzeuge & Maschinen GmbH
Año de construcción: usado
Ubicación: Land-grinding length:700 mm<br/>grinding width:400 mm<br/>workpiece height:350 mm<br/>surface area:1100x300 mm<br/>spindle drive:6,8 ps<br/>hydraulic pump engine:2 ps<br/>cross feed motor:0,33 ps<br/>:1800x1200 mm<br/>grinding wheel speeds:1400 u/min<br/>total power requirement:11 kw<br/>weight of the machine ca.:3100 kg<br/><br/>used / overhauled surface grinding machine, make elb, type swb 06 va ii-k, machine no. 114461172  machine with automatic notification in all 3 axes.  machine completely dismantled, cleaned all the components thoroughly and checked for complete functionality. wear parts replaced defective components reparariert or replaced. reassembly, compl. functional testing and internal loss. machine in absolute working condition. machine repainted. machine in perfect, produktionsbereitem state.  accessories: - electric magnetic chuck with coarse / fine pole pitch, dimensions 600x500 mm - demagnetisiereinrichtung installed in the control cabinet - manual micrometric abrichtapparat mounted above the grinding wheel - 1 piece grinding wheel - complete coolant system - setting up / leveling -. technical documentation in german  all machines are connected prior to delivery, tested and verified all of the functions.  payment: 100% before loading the machine warranty: no  fig. similar. GRINDING LENGTH:700 MM
GRINDING WIDTH:400 MM
WORKPIECE HEIGHT:350 MM
SURFACE AREA:1100X300 MM
SPINDLE DRIVE:6,8 PS
HYDRAULIC PUMP ENGINE:2 PS
CROSS FEED MOTOR:0,33 PS
:1800X1200 MM
GRINDING WHEEL SPEEDS:1400 U/MIN
TOTAL POWER REQUIREMENT:11 KW
WEIGHT OF THE MACHINE CA.:3100 KG

USED / OVERHAULED SURFACE GRINDING MACHINE, MAKE ELB, TYPE SWB 06 VA II-K, MACHINE NO. 114461172 MACHINE WITH AUTOMATIC NOTIFICATION IN ALL 3 AXES. MACHINE COMPLETELY DISMANTLED, CLEANED ALL THE COMPONENTS THOROUGHLY AND CHECKED FOR COMPLETE FUNCTIONALITY. WEAR PARTS REPLACED DEFECTIVE COMPONENTS REPARARIERT OR REPLACED. REASSEMBLY, COMPL. FUNCTIONAL TESTING AND INTERNAL LOSS. MACHINE IN ABSOLUTE WORKING CONDITION. MACHINE REPAINTED. MACHINE IN PERFECT, PRODUKTIONSBEREITEM STATE. ACCESSORIES: - ELECTRIC MAGNETIC CHUCK WITH COARSE / FINE POLE PITCH, DIMENSIONS 600X500 MM - DEMAGNETISIEREINRICHTUNG INSTALLED IN THE CONTROL CABINET - MANUAL MICROMETRIC ABRICHTAPPARAT MOUNTED ABOVE THE GRINDING WHEEL - 1 PIECE GRINDING WHEEL - COMPLETE COOLANT SYSTEM - SETTING UP / LEVELING -. TECHNICAL DOCUMENTATION IN GERMAN ALL MACHINES ARE CONNECTED PRIOR TO DELIVERY, TESTED AND VERIFIED ALL OF THE FUNCTIONS. PAYMENT: 100% BEFORE LOADING THE MACHINE WARRANTY: NO FIG. SIMILAR.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land--the welded frame in mono-block design ensures a good stiffness and high accuracy of the machine
-roller guide with 3-point support and an imported ad of with a handwheel adjustable cutting cone
-the simplified setting of the cutting gap by moving blade carrier and mono-block knife leads to an improvement of the quality
-since the machine with a synchronous control system with cylinders connected in series, you get a very uniform gravity. it's very simple. the cutting angle by controlling the flow to the cylinders connected in series on the different cutting thicknesses set
-a backgauge with drive and display facilitates the setting
using a lamp to indicate the cutting line, the customer can perform a shadow line cut
-the hold-down devices guarantee a reliable cutting
-infinitely variable adjustment of the cutting stroke

technical data
-maximum cutting thickness: 6 mm
-maximum cutting width: 3100 mm
-cutting gap: 0.05 - 0.60 mm
-cutting angle: 0.5-3 â°
-speed: 13-45 rpm
-maximum piston stroke: 210 mm
-maximum cutting power: 145 kn
-max down holder force: 150 kn
-maximum working pressure: 18 mpa
-rear velocity range: 10-750 mm
-oil pump / flow rate: 25 ml / r
-engine power: 7,5 kw
-motor speed: 1470 u/min
-dimensions wxhxd: 4045 x 1750 x 3770 mm
-weight: 5500 kg -THE WELDED FRAME IN MONO-BLOCK DESIGN ENSURES A GOOD STIFFNESS AND HIGH ACCURACY OF THE MACHINE -ROLLER GUIDE WITH 3-POINT SUPPORT AND AN IMPORTED AD OF WITH A HANDWHEEL ADJUSTABLE CUTTING CONE -THE SIMPLIFIED SETTING OF THE CUTTING GAP BY MOVING BLADE CARRIER AND MONO-BLOCK KNIFE LEADS TO AN IMPROVEMENT OF THE QUALITY -SINCE THE MACHINE WITH A SYNCHRONOUS CONTROL SYSTEM WITH CYLINDERS CONNECTED IN SERIES, YOU GET A VERY UNIFORM GRAVITY. IT'S VERY SIMPLE. THE CUTTING ANGLE BY CONTROLLING THE FLOW TO THE CYLINDERS CONNECTED IN SERIES ON THE DIFFERENT CUTTING THICKNESSES SET -A BACKGAUGE WITH DRIVE AND DISPLAY FACILITATES THE SETTING USING A LAMP TO INDICATE THE CUTTING LINE, THE CUSTOMER CAN PERFORM A SHADOW LINE CUT -THE HOLD-DOWN DEVICES GUARANTEE A RELIABLE CUTTING -INFINITELY VARIABLE ADJUSTMENT OF THE CUTTING STROKE TECHNICAL DATA -MAXIMUM CUTTING THICKNESS: 6 MM -MAXIMUM CUTTING WIDTH: 3100 MM -CUTTING GAP: 0.05 - 0.60 MM -CUTTING ANGLE: 0.5-3 &ACIRC;&DEG; -SPEED: 13-45 RPM -MAXIMUM PISTON STROKE: 210 MM -MAXIMUM CUTTING POWER: 145 KN -MAX DOWN HOLDER FORCE: 150 KN -MAXIMUM WORKING PRESSURE: 18 MPA -REAR VELOCITY RANGE: 10-750 MM -OIL PUMP / FLOW RATE: 25 ML / R -ENGINE POWER: 7,5 KW -MOTOR SPEED: 1470 U/MIN -DIMENSIONS WXHXD: 4045 X 1750 X 3770 MM -WEIGHT: 5500 KG
Vendedor: ZIEGLER Maschinen & Werkzeuge
Año de construcción: usado
Ubicación: Land-x-travel:800 mm<br/>y-travel:710 mm<br/>z-travel:710 mm<br/>size of pallet:500x500 mm<br/>max. workpiece weight:600 kg<br/>total power requirement:27 kw<br/><br/>brandnew machine with the following characterisitics:  1. control system siemens 840d (10.\ X-TRAVEL:800 MM
Y-TRAVEL:710 MM
Z-TRAVEL:710 MM
SIZE OF PALLET:500X500 MM
MAX. WORKPIECE WEIGHT:600 KG
TOTAL POWER REQUIREMENT:27 KW

BRANDNEW MACHINE WITH THE FOLLOWING CHARACTERISITICS: 1. CONTROL SYSTEM SIEMENS 840D (10.\" LCD MONITOR WITH SHOPMILL) 2. WORKING TABLE SIZE: 500 X 500 MM 3. MAX. WORKPIECE DIMENSION: DIA. 900X H900MM 4. MAX. WORKPIECE LOAD CAPACITY: 600 KGS EACH PALLET 5. SPINDLE CENTER TO PALLET SURFACE: 50 ~ 760 MM 6. SPINDLE NOSE TO PALLET CENTER: 150 ~ 860 MM 7. X/Y/Z STROKE 800/710/710 MM 8. X/Y/Z STROKE RAPID TRAVERSE: 50/50/50 M/MIN 9. SPINDLE MOTOR 27 KW (BUILT-IN TYPE) 10. SPINDLE SPEED 10.000 RPM WITH SPINDLE COOLER 11. SPINDLE NOSE NT#50 (BT50) 12. ATC CAPACITY 60 TOOLS 13. ROTARY TYPE APC UNIT WITH WORKING PALLET X 2 PCS. 14. 4TH. AXIS (B-AXIS) FUNCTION INDEX WITH 1 DEGREE POSITIONING 15. COOLANT UNIT 16. COOLANT THRU. SPINDLE WITH HIGH PRESSURE PUMP (15 BAR) AND FILTER SYSTEM (A TYPE) 17. FULL SPLASH GUARD 18. ELECTRIC CABINET WITH HEAT EXCHANGER 19. WITHOUT TRANSFORMER (POWER SOURCE 380 V) 20. RIGID TAPPING 21. MANUAL PULSE GENERATOR 22. AUGER TYPE CHIP SCREWS INSIDE MACHINE BED 23. CHIP CONVEYOR H=1100 MM WITH TROLLEY (SCRAPER TYPE) 24. CUTTING CHIPS FRONT SIDE DISCHARGE 25. MACHINE COLOR TONGTAI GREY/BLUE 26. MACHINE WARRANTY 1 YEAR 27. SIEMENS WARRANTY OPTIONS: 1. BALANCE OF 4TH AXIS (B-AXIS) INDEX 0.001 DEGREE POSITIONING 2. LINEAR SCALES FOR X/Y/Z/ AXIS (HEIDENHAIN) 3. TOOLLENGTH & BREAKAGE DETECTOR (RENISHAW NC-4) 4. WORKPIECE MEASUREMENT PROBE SYSTEM (RENISHAW OMP60) 5. AUTO POWER OFF FUNCTION 6. A/C FOR ELECTRICAL CABINET 7. ADDITIONAL M CODE X8 SETS 8. OIL SKIMMER (DISC TYPE) 9. COOLANT GUN WITH ON/OFF SWITCH 10. STABILIZER (POWER SOURCE 380V) 11. HYDRAULIC UNIT HEATING SYSTEM
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-5-axis machining center-
fehlmann picomax 825 with erowa pallet automation

control: heidenhein itnc530
year of construction: 2010

procedures/swing areas:
x-axis: 820mm
y-axis: 700mm
z-axis: 450mm
a-axis: 230â° (view compactset 115 â° +/-)
c-axis: 360â° (round table)

rapid traverse:
30 000 mm (linear axes)

spindle speed range: 50-20,000 1/min
interface: hsk63
power: 24kw
torque: 120nm

tool changer:
80 positions (pickup)

facilities: erowa robot easy automation with 10 pallets for workpieces up to 310 x 310 x 300 mm 80 bar ikz 1050 l coolant tank (coolant pressure above m features adjustable)

renishaw omp 40-2 probe

laser tool measurement for d0, 3-80 mm

direct path measurement systems for all axes (xyzac)

actively cooled shaft drives in all axes (xyzac)
actively cooled y carriage

automatic length compensation of main spindle via direct measuring system

5achsen-simultan and spline interpolsation (polynomials 3.grades)

round table with torque drive 5-AXIS MACHINING CENTER- FEHLMANN PICOMAX 825 WITH EROWA PALLET AUTOMATION CONTROL: HEIDENHEIN ITNC530 YEAR OF CONSTRUCTION: 2010 PROCEDURES/SWING AREAS: X-AXIS: 820MM Y-AXIS: 700MM Z-AXIS: 450MM A-AXIS: 230&ACIRC;&DEG; (VIEW COMPACTSET 115 &ACIRC;&DEG; +/-) C-AXIS: 360&ACIRC;&DEG; (ROUND TABLE) RAPID TRAVERSE: 30 000 MM (LINEAR AXES) SPINDLE SPEED RANGE: 50-20,000 1/MIN INTERFACE: HSK63 POWER: 24KW TORQUE: 120NM TOOL CHANGER: 80 POSITIONS (PICKUP) FACILITIES: EROWA ROBOT EASY AUTOMATION WITH 10 PALLETS FOR WORKPIECES UP TO 310 X 310 X 300 MM 80 BAR IKZ 1050 L COOLANT TANK (COOLANT PRESSURE ABOVE M FEATURES ADJUSTABLE) RENISHAW OMP 40-2 PROBE LASER TOOL MEASUREMENT FOR D0, 3-80 MM DIRECT PATH MEASUREMENT SYSTEMS FOR ALL AXES (XYZAC) ACTIVELY COOLED SHAFT DRIVES IN ALL AXES (XYZAC) ACTIVELY COOLED Y CARRIAGE AUTOMATIC LENGTH COMPENSATION OF MAIN SPINDLE VIA DIRECT MEASURING SYSTEM 5ACHSEN-SIMULTAN AND SPLINE INTERPOLSATION (POLYNOMIALS 3.GRADES) ROUND TABLE WITH TORQUE DRIVE
Vendedor: RG-Tools GmbH
Año de construcción: usado
Ubicación: Land-:fs 2550 adp | fs 3060 adp | fs 4080 adp <br/>grinding length:500 | 600 | 800 mm<br/>grinding width:250 | 300 | 400 mm<br/>distance table/spindle center:500 (option 600) | 500 (option 600) | 550 (option 650) mm<br/>table-size:250x500 | 300x600 | 400x800 mm<br/>max. table load:250 | 300 | 400 kg<br/>table speed -stepless-:5-25 m/min<br/>rapid traverse cross:900 mm/min<br/>cross feed on handwheel:0,1/0,5/1 mm/u; 0,001/0,005/0,01 mm/° <br/>vertical feed on handwheel:0,1/0,5/1 mm/u; 0,001/0,005/0,01 mm/° <br/>vertical rapid traverse:450 mm/min<br/>vertical infeed, min.:0,001 mm<br/>dimensions of grinding wheel:180x13x31,75 | 355x38x127 | 405x50x127 mm<br/>spindle speed:2900 | 1450 | 1450 1/min<br/>spindle drive:1,5 | 3,7 | 3,7 kw<br/>hydraulic motor:0,75 | 1,5 | 1,5 kw<br/>weight of the machine ca.:2350 | 2500 | 3700 kg<br/>machine length:2680 | 3000 | 3300 mm<br/>machine width:2350 | 2350 | 2650 mm<br/>sps machine control: <br/>automatic vertical infeed: <br/>autom. dressing compensation: <br/>machine semi-cover: <br/>lcd touchscreen with plc control: <br/>micro feed for cross feed: <br/>autom. stroke adjusting for cross and longitudinal: <br/>position display (cross and vertical feed): <br/>: <br/>machine tools: <br/>levelling elements: <br/>ce-design: <br/>: <br/>balancing mandrel: <br/>grinding wheel extractor: <br/>grinding wheel: <br/>grinding wheel flange: <br/>: <br/>mpg hand wheel: <br/>stepless spindle speed: <br/>: <br/>: <br/>: <br/>: <br/>dust suction: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>: <br/>nc automatic vertical feed: <br/><br/>optimized structure ? the major parts of kraft  grinders are manufactured from high quality cast iron combined with an outstanding structural design by finite element analysis (fea). major parts are stress relieved to ensure maximun rigidity, stability and machining accuracy.  2.   turcite-b on slideways ? the x and z axes slideways are coated with turcite-b for stable movement and long term accuracy.  3.   precision spindle design ? the spindle runs in a class p4 high precision angular contact bearing, assuring run-out accuracy in 2 µm. the cartridge-type spindle is completely sealed and lubricated for long working lifetime, provideing high accuracy grinding and a long service life.  4.   x axis driven by stepless variable proportional valve hydraulic system ? allowing for feed speed adjustment according to the workpiece type for increased convenience of operation.  5.   y & z axes driven by ac servomotor + mpg hand wheel ? providing high accuracy and convenient operating.  6.   semi enclosed splash shield (ride side open) ? more safty and more cleaning.  7.   cross stroke adjustment for x & z axes ? travel setting by joystick, more convenient.  8.   spindle motor inverter ? variable spindle speed adjustment for different material.  9.   auto dressing and compensation (diamond dresser on the table) function for increasing more processing efficiency.  10. grinding mode : surface, crisscross, plunge , and pitch (same pitch and same depth).  11. position display (for y & z axes).  12. 10? lcd touch screen panel (plc controller) and graphical hmi interface. operating more easier, friendly and efficiency.  13. [option] auto balancing system ? providing superior grinding accuracy and finishing.  14. [option] nc auto parallel dressing and compensating device (over spindle head) function for increasing more processing efficiency and saving grinding time. :FS 2550 ADP | FS 3060 ADP | FS 4080 ADP
GRINDING LENGTH:500 | 600 | 800 MM
GRINDING WIDTH:250 | 300 | 400 MM
DISTANCE TABLE/SPINDLE CENTER:500 (OPTION 600) | 500 (OPTION 600) | 550 (OPTION 650) MM
TABLE-SIZE:250X500 | 300X600 | 400X800 MM
MAX. TABLE LOAD:250 | 300 | 400 KG
TABLE SPEED -STEPLESS-:5-25 M/MIN
RAPID TRAVERSE CROSS:900 MM/MIN
CROSS FEED ON HANDWHEEL:0,1/0,5/1 MM/U; 0,001/0,005/0,01 MM/°
VERTICAL FEED ON HANDWHEEL:0,1/0,5/1 MM/U; 0,001/0,005/0,01 MM/°
VERTICAL RAPID TRAVERSE:450 MM/MIN
VERTICAL INFEED, MIN.:0,001 MM
DIMENSIONS OF GRINDING WHEEL:180X13X31,75 | 355X38X127 | 405X50X127 MM
SPINDLE SPEED:2900 | 1450 | 1450 1/MIN
SPINDLE DRIVE:1,5 | 3,7 | 3,7 KW
HYDRAULIC MOTOR:0,75 | 1,5 | 1,5 KW
WEIGHT OF THE MACHINE CA.:2350 | 2500 | 3700 KG
MACHINE LENGTH:2680 | 3000 | 3300 MM
MACHINE WIDTH:2350 | 2350 | 2650 MM
SPS MACHINE CONTROL:
AUTOMATIC VERTICAL INFEED:
AUTOM. DRESSING COMPENSATION:
MACHINE SEMI-COVER:
LCD TOUCHSCREEN WITH PLC CONTROL:
MICRO FEED FOR CROSS FEED:
AUTOM. STROKE ADJUSTING FOR CROSS AND LONGITUDINAL:
POSITION DISPLAY (CROSS AND VERTICAL FEED):
:
MACHINE TOOLS:
LEVELLING ELEMENTS:
CE-DESIGN:
:
BALANCING MANDREL:
GRINDING WHEEL EXTRACTOR:
GRINDING WHEEL:
GRINDING WHEEL FLANGE:
:
MPG HAND WHEEL:
STEPLESS SPINDLE SPEED:
:
:
:
:
DUST SUCTION:
:
:
:
:
:
:
:
NC AUTOMATIC VERTICAL FEED:

OPTIMIZED STRUCTURE ? THE MAJOR PARTS OF KRAFT GRINDERS ARE MANUFACTURED FROM HIGH QUALITY CAST IRON COMBINED WITH AN OUTSTANDING STRUCTURAL DESIGN BY FINITE ELEMENT ANALYSIS (FEA). MAJOR PARTS ARE STRESS RELIEVED TO ENSURE MAXIMUN RIGIDITY, STABILITY AND MACHINING ACCURACY. 2. TURCITE-B ON SLIDEWAYS ? THE X AND Z AXES SLIDEWAYS ARE COATED WITH TURCITE-B FOR STABLE MOVEMENT AND LONG TERM ACCURACY. 3. PRECISION SPINDLE DESIGN ? THE SPINDLE RUNS IN A CLASS P4 HIGH PRECISION ANGULAR CONTACT BEARING, ASSURING RUN-OUT ACCURACY IN 2 µM. THE CARTRIDGE-TYPE SPINDLE IS COMPLETELY SEALED AND LUBRICATED FOR LONG WORKING LIFETIME, PROVIDEING HIGH ACCURACY GRINDING AND A LONG SERVICE LIFE. 4. X AXIS DRIVEN BY STEPLESS VARIABLE PROPORTIONAL VALVE HYDRAULIC SYSTEM ? ALLOWING FOR FEED SPEED ADJUSTMENT ACCORDING TO THE WORKPIECE TYPE FOR INCREASED CONVENIENCE OF OPERATION. 5. Y & Z AXES DRIVEN BY AC SERVOMOTOR + MPG HAND WHEEL ? PROVIDING HIGH ACCURACY AND CONVENIENT OPERATING. 6. SEMI ENCLOSED SPLASH SHIELD (RIDE SIDE OPEN) ? MORE SAFTY AND MORE CLEANING. 7. CROSS STROKE ADJUSTMENT FOR X & Z AXES ? TRAVEL SETTING BY JOYSTICK, MORE CONVENIENT. 8. SPINDLE MOTOR INVERTER ? VARIABLE SPINDLE SPEED ADJUSTMENT FOR DIFFERENT MATERIAL. 9. AUTO DRESSING AND COMPENSATION (DIAMOND DRESSER ON THE TABLE) FUNCTION FOR INCREASING MORE PROCESSING EFFICIENCY. 10. GRINDING MODE : SURFACE, CRISSCROSS, PLUNGE , AND PITCH (SAME PITCH AND SAME DEPTH). 11. POSITION DISPLAY (FOR Y & Z AXES). 12. 10? LCD TOUCH SCREEN PANEL (PLC CONTROLLER) AND GRAPHICAL HMI INTERFACE. OPERATING MORE EASIER, FRIENDLY AND EFFICIENCY. 13. [OPTION] AUTO BALANCING SYSTEM ? PROVIDING SUPERIOR GRINDING ACCURACY AND FINISHING. 14. [OPTION] NC AUTO PARALLEL DRESSING AND COMPENSATING DEVICE (OVER SPINDLE HEAD) FUNCTION FOR INCREASING MORE PROCESSING EFFICIENCY AND SAVING GRINDING TIME.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-multi spindle automatic lathe afh 130-8 pour dnt proj. no. 000310 year 1991
8 spindle rotary feeder
collet chuck
in dnt version, no change gears for speed and cycle time required
-1 set of curves for cross slide - 1 set of curves for longitudinal slide high pressure coolant pump
2 sep. control panels
spindle stop setup

balluff cam schaltwerk
wã¶hrle clear text display
 MULTI SPINDLE AUTOMATIC LATHE AFH 130-8 POUR DNT PROJ. NO. 000310 YEAR 1991 8 SPINDLE ROTARY FEEDER COLLET CHUCK IN DNT VERSION, NO CHANGE GEARS FOR SPEED AND CYCLE TIME REQUIRED -1 SET OF CURVES FOR CROSS SLIDE - 1 SET OF CURVES FOR LONGITUDINAL SLIDE HIGH PRESSURE COOLANT PUMP 2 SEP. CONTROL PANELS SPINDLE STOP SETUP BALLUFF CAM SCHALTWERK W&ATILDE;&PARA;HRLE CLEAR TEXT DISPLAY
Vendedor: turn-tec Produktion & Service GmbH
Año de construcción: usado
Ubicación: Land-spindle diameter:110 mm<br/>x-travel:900 mm<br/>y-travel:900 mm<br/>z-axis:1400 mm<br/>w-axis:600 mm<br/>spindle nose:50 iso<br/>turning speeds steps:22 stufen<br/>turning speed range:8-1000 u/min<br/>radial face slide travel:180 mm<br/>table surface area:1100x960 mm<br/>max. table load:2500 kg<br/>dimensions of the machine ca.:4910x2454x2750 mm<br/>total power requirement:7,5 kw<br/>weight of the machine ca.:13 t<br/>dro: <br/>hydr. clamping of the axes: <br/>hydr. table clamping: <br/>ce and declaration of conformity: <br/>4 jaw chuck: <br/>halogen lamp: <br/>rear column: <br/>: <br/>: <br/>metric, 400v 50hz 3 phase: <br/><br/>unused table boring machine, make smtcl, type tpx 6111b  main features: powerful, flexible and productive with an optimal price / performance ratio  short and sweet ücompact, rigid cast-iron construction ü sturdy four-pointed guides, which are hardened and precision ground, guarantee accurate working for many years ümechanical functions, which can not be operated simultaneously, are locked against each other üx, y-axis has a dro display with memory function üspindle with tool holder iso50 and automatic clamping system üspindelstock and feed gear are equipped with an overload clutch üthe machine is equipped with a thread cutting device üplan disk and drilling spindle have the different functions different speed ranges which are dependent on their tasks ütable rotatable over 360 ° (optional with display of the degree setting) ütelescopic steel covers protect the guides against chips and soiling üwith variable speed drive and 3-axis servo motor üweight compensation for headstock ühighest workpiece weight from 2000 to 6000kg üspindle displacement in high-precision bearings without clearance ücoating spindle from 90 mm - 130 mm diameter - extendable 600 - 900 mm (w-axis) üautomatic tool clamping üautomatic lubrication of the guideways    further technical data and accessories, according to the appendix.   benefit from the favorable leasing and hire-purchase conditions of abc leasing. ask us about it. of course, you also receive from us free delivery, assembly / commissioning and ready-to-hand transfer as well as control training. SPINDLE DIAMETER:110 MM
X-TRAVEL:900 MM
Y-TRAVEL:900 MM
Z-AXIS:1400 MM
W-AXIS:600 MM
SPINDLE NOSE:50 ISO
TURNING SPEEDS STEPS:22 STUFEN
TURNING SPEED RANGE:8-1000 U/MIN
RADIAL FACE SLIDE TRAVEL:180 MM
TABLE SURFACE AREA:1100X960 MM
MAX. TABLE LOAD:2500 KG
DIMENSIONS OF THE MACHINE CA.:4910X2454X2750 MM
TOTAL POWER REQUIREMENT:7,5 KW
WEIGHT OF THE MACHINE CA.:13 T
DRO:
HYDR. CLAMPING OF THE AXES:
HYDR. TABLE CLAMPING:
CE AND DECLARATION OF CONFORMITY:
4 JAW CHUCK:
HALOGEN LAMP:
REAR COLUMN:
:
:
METRIC, 400V 50HZ 3 PHASE:

UNUSED TABLE BORING MACHINE, MAKE SMTCL, TYPE TPX 6111B MAIN FEATURES: POWERFUL, FLEXIBLE AND PRODUCTIVE WITH AN OPTIMAL PRICE / PERFORMANCE RATIO SHORT AND SWEET üCOMPACT, RIGID CAST-IRON CONSTRUCTION ü STURDY FOUR-POINTED GUIDES, WHICH ARE HARDENED AND PRECISION GROUND, GUARANTEE ACCURATE WORKING FOR MANY YEARS üMECHANICAL FUNCTIONS, WHICH CAN NOT BE OPERATED SIMULTANEOUSLY, ARE LOCKED AGAINST EACH OTHER üX, Y-AXIS HAS A DRO DISPLAY WITH MEMORY FUNCTION üSPINDLE WITH TOOL HOLDER ISO50 AND AUTOMATIC CLAMPING SYSTEM üSPINDELSTOCK AND FEED GEAR ARE EQUIPPED WITH AN OVERLOAD CLUTCH üTHE MACHINE IS EQUIPPED WITH A THREAD CUTTING DEVICE üPLAN DISK AND DRILLING SPINDLE HAVE THE DIFFERENT FUNCTIONS DIFFERENT SPEED RANGES WHICH ARE DEPENDENT ON THEIR TASKS üTABLE ROTATABLE OVER 360 ° (OPTIONAL WITH DISPLAY OF THE DEGREE SETTING) üTELESCOPIC STEEL COVERS PROTECT THE GUIDES AGAINST CHIPS AND SOILING üWITH VARIABLE SPEED DRIVE AND 3-AXIS SERVO MOTOR üWEIGHT COMPENSATION FOR HEADSTOCK üHIGHEST WORKPIECE WEIGHT FROM 2000 TO 6000KG üSPINDLE DISPLACEMENT IN HIGH-PRECISION BEARINGS WITHOUT CLEARANCE üCOATING SPINDLE FROM 90 MM - 130 MM DIAMETER - EXTENDABLE 600 - 900 MM (W-AXIS) üAUTOMATIC TOOL CLAMPING üAUTOMATIC LUBRICATION OF THE GUIDEWAYS FURTHER TECHNICAL DATA AND ACCESSORIES, ACCORDING TO THE APPENDIX. BENEFIT FROM THE FAVORABLE LEASING AND HIRE-PURCHASE CONDITIONS OF ABC LEASING. ASK US ABOUT IT. OF COURSE, YOU ALSO RECEIVE FROM US FREE DELIVERY, ASSEMBLY / COMMISSIONING AND READY-TO-HAND TRANSFER AS WELL AS CONTROL TRAINING.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-technical data:

-mot 3. driven roller - hydr. delivery of the two bottom rollers + the two setup roles / lead role
-the machine is 240 n / mmâ² strength of the material / yield point horizontally or vertically can be used-
/ re max torque 25
-bending performance: - flat stock - upright 80 x 20 mm ã? 800 mm - flat 140 x 30 mm ã? 700 mm
-hea 120 ã? 1000 mm
-tubular 88.9 x 3, 2 ã? 1000 mm
-bending speed 0-5 m / min
-roll diameter 290 mm
-shaft diameter 90 mm
-drive 400 v / 9,2 kw
-with:-analogue actual value indicators
-standart bending set for flat and angle material - div. tube roller sets 28; 48.3; 
	-weight approx.						2000 kg
	-space requirement approx.		            b h 1600 x 1300 x 1400 mm    
 TECHNICAL DATA: -MOT 3. DRIVEN ROLLER - HYDR. DELIVERY OF THE TWO BOTTOM ROLLERS + THE TWO SETUP ROLES / LEAD ROLE -THE MACHINE IS 240 N / MM&ACIRC;&SUP2; STRENGTH OF THE MATERIAL / YIELD POINT HORIZONTALLY OR VERTICALLY CAN BE USED- / RE MAX TORQUE 25 -BENDING PERFORMANCE: - FLAT STOCK - UPRIGHT 80 X 20 MM &ATILDE;? 800 MM - FLAT 140 X 30 MM &ATILDE;? 700 MM -HEA 120 &ATILDE;? 1000 MM -TUBULAR 88.9 X 3, 2 &ATILDE;? 1000 MM -BENDING SPEED 0-5 M / MIN -ROLL DIAMETER 290 MM -SHAFT DIAMETER 90 MM -DRIVE 400 V / 9,2 KW -WITH:-ANALOGUE ACTUAL VALUE INDICATORS -STANDART BENDING SET FOR FLAT AND ANGLE MATERIAL - DIV. TUBE ROLLER SETS 28; 48.3; -WEIGHT APPROX. 2000 KG -SPACE REQUIREMENT APPROX. B H 1600 X 1300 X 1400 MM
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-x-travel:2000 mm<br/>y-travel:1400 mm<br/>z-travel:1250 mm<br/><br/> contains:  1. control system fanuc 31i-m 2. working pallet size 1250 x 1250 mm 3. max. workpiece dimensions Ø 2240 x 1500 mm high 4. max. workpiece load capacity 4000 kg x 2 pallets 5. x/y/z-axis stroke 2000/1400/1250 mm 6. x/y/z axis rapid traverse 50/50/50 m/min 7. spindle center to pallet surface 0 ~ 1400 mm 8. spindle nose to pallet center 400 ~ 1650 mm 9. spindle motor 18,5/22 kw with dual speed gearbox 10. spindle speed 6.000 rpm (2 steps) 11 spindle nose nt#50 12. atc capacity 60 tools 13. b-axis working table index min. 1 degree increment 14. coolant unit 15. coolant through spindle with high pressure pump (15 bar) and paper filter system a type 16. full splash cover 17. servo motor of x/y/z/b-axis all 6 kw 18. apc unit @ b-axis index (1 degree positioning) 19. electric cabinet with heat exchanger 20.manual pulse generator 21. rigid tapping 22. chip conveyor h=1100mm with trolley (chain type) 23. linear scale for x/y/z-axis 24. machine dimensions 4900x8730x4035 mm 25. spindle cooler 26. tri colour light 27. transformer 28. machine colour tongtai grey/blue  options:  1. balance of capacity of tool magazine 120 2. oil skimmer 3. rotary scale for b-axis 4. rotary table dynamic fixture offset 5. balance of b-axis index (0.0001 degree positioning) 6. coolant gun and air gun 7. ce mark 8. fanuc warranty western europe X-TRAVEL:2000 MM
Y-TRAVEL:1400 MM
Z-TRAVEL:1250 MM

CONTAINS: 1. CONTROL SYSTEM FANUC 31I-M 2. WORKING PALLET SIZE 1250 X 1250 MM 3. MAX. WORKPIECE DIMENSIONS Ø 2240 X 1500 MM HIGH 4. MAX. WORKPIECE LOAD CAPACITY 4000 KG X 2 PALLETS 5. X/Y/Z-AXIS STROKE 2000/1400/1250 MM 6. X/Y/Z AXIS RAPID TRAVERSE 50/50/50 M/MIN 7. SPINDLE CENTER TO PALLET SURFACE 0 ~ 1400 MM 8. SPINDLE NOSE TO PALLET CENTER 400 ~ 1650 MM 9. SPINDLE MOTOR 18,5/22 KW WITH DUAL SPEED GEARBOX 10. SPINDLE SPEED 6.000 RPM (2 STEPS) 11 SPINDLE NOSE NT#50 12. ATC CAPACITY 60 TOOLS 13. B-AXIS WORKING TABLE INDEX MIN. 1 DEGREE INCREMENT 14. COOLANT UNIT 15. COOLANT THROUGH SPINDLE WITH HIGH PRESSURE PUMP (15 BAR) AND PAPER FILTER SYSTEM A TYPE 16. FULL SPLASH COVER 17. SERVO MOTOR OF X/Y/Z/B-AXIS ALL 6 KW 18. APC UNIT @ B-AXIS INDEX (1 DEGREE POSITIONING) 19. ELECTRIC CABINET WITH HEAT EXCHANGER 20.MANUAL PULSE GENERATOR 21. RIGID TAPPING 22. CHIP CONVEYOR H=1100MM WITH TROLLEY (CHAIN TYPE) 23. LINEAR SCALE FOR X/Y/Z-AXIS 24. MACHINE DIMENSIONS 4900X8730X4035 MM 25. SPINDLE COOLER 26. TRI COLOUR LIGHT 27. TRANSFORMER 28. MACHINE COLOUR TONGTAI GREY/BLUE OPTIONS: 1. BALANCE OF CAPACITY OF TOOL MAGAZINE 120 2. OIL SKIMMER 3. ROTARY SCALE FOR B-AXIS 4. ROTARY TABLE DYNAMIC FIXTURE OFFSET 5. BALANCE OF B-AXIS INDEX (0.0001 DEGREE POSITIONING) 6. COOLANT GUN AND AIR GUN 7. CE MARK 8. FANUC WARRANTY WESTERN EUROPE
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-vertical machining centre	
mazak	
nexus 410a	
year of production: 2004	
control system: pc fusion cnc 640m nexus	
working hours: 73916	
worktable	
table size 900 x 410 mm	
max. table load 500 kg	
t-slots 3 count	
t-slot spacing 125 mm	
travel	
x-axis stroke 560 mm	
y-axis stroke 410 mm	
z-axis stroke 510 mm	
feedrate	
rapid traverse rate:	
x/y/z-axis 36 m/min	
spindle	
spindle speed 35 - 12.000 rpm	
tool shaft cat 40	
main spindle motor 18.5 kw	
tool magazine	
turret tool capacity 30	
max. tool diameter 80 mm	
with unoccupied adjacent station 125 mm	
max. tool length 350 mm	
max. tool weight 8 kg	
machine-data	
total power requirement 27.8 kva	
machine weight	
approx. 4.920 kg	
machine size (l x w x h)	
approx. 2.00 x 2.60 x 2.80 m	
accessories:	
mazak monitoring system c	
fully automatic tool setting	
machining navigation	
pcmcia interface	
coolant system	
work light	
mayfran chip conveyor	
manuals	
available from: 01.07.2019	  VERTICAL MACHINING CENTRE MAZAK NEXUS 410A YEAR OF PRODUCTION: 2004 CONTROL SYSTEM: PC FUSION CNC 640M NEXUS WORKING HOURS: 73916 WORKTABLE TABLE SIZE 900 X 410 MM MAX. TABLE LOAD 500 KG T-SLOTS 3 COUNT T-SLOT SPACING 125 MM TRAVEL X-AXIS STROKE 560 MM Y-AXIS STROKE 410 MM Z-AXIS STROKE 510 MM FEEDRATE RAPID TRAVERSE RATE: X/Y/Z-AXIS 36 M/MIN SPINDLE SPINDLE SPEED 35 - 12.000 RPM TOOL SHAFT CAT 40 MAIN SPINDLE MOTOR 18.5 KW TOOL MAGAZINE TURRET TOOL CAPACITY 30 MAX. TOOL DIAMETER 80 MM WITH UNOCCUPIED ADJACENT STATION 125 MM MAX. TOOL LENGTH 350 MM MAX. TOOL WEIGHT 8 KG MACHINE-DATA TOTAL POWER REQUIREMENT 27.8 KVA MACHINE WEIGHT APPROX. 4.920 KG MACHINE SIZE (L X W X H) APPROX. 2.00 X 2.60 X 2.80 M ACCESSORIES: MAZAK MONITORING SYSTEM C FULLY AUTOMATIC TOOL SETTING MACHINING NAVIGATION PCMCIA INTERFACE COOLANT SYSTEM WORK LIGHT MAYFRAN CHIP CONVEYOR MANUALS AVAILABLE FROM: 01.07.2019
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: scales:heidenhain
round table c-axis:dr630 mit encoder
spindle air purge:

standard accessories: 1. spindle cooler 2. spindle air blast 3. cutting coolant system 4. auto lubrication system 5. rigid tapping 6. air condition for electric cabinet 7. program end alarm light 8. usb/rs232 interface 9. oil skimmer 10. air/water cleaning equipment 11.dual screw type chip remover 12.steel-belt type chip conveyor with cart 13. operator\'s manual 14. working lamp 15. tool kit 16. x, y, z axis linear guideways(x,y axis ball,z axis roller) 17. x, y, z axis ballscrew(x.y axis ?63-p20,z axis ?50-p10) 18. semi enclosure splash guard(no roof) 19. foot switch for tool released 20. x axis telescopic cover+y axis javara cover 21. hanging type monitor+mpg 22. base leveling screw & foundation j-bolts 23.tramec a5tk speed max. 18.000 rpm power s1 28 kw constant from 3.000 rpm torque s1 90nm up to 3000rpm 24.electric box&operator door interlock 25.deeper chip conveyor 26.machine color:casting ral-5008,cover ral-7035 .gif" alt="Land-x-travel:2200 mm
y-travel:1300+650 mm
z-travel:800 mm
dimensions of the machine ca.:6,6 x 3,4 x 4 m
table-size:2000 x 1200 mm
distance between columns:1400 (ohne spritzschutz) mm
rapid feed in axis-x,y,z:25/ 25/ 25 m/min.
spindle nose:hsk-a63
spindle speed:18000 1/min
spindle drive:28kw(s1),90nm(s1)
tool changer:24 fach
table load:10 t
machine size (lxwxh):6.4m/ 4.6m/ 5.0m mm
rotary table diameter:630 mm
spindle coolant system:
cooling system:
automatic lubrication system:
rigid tapping:
air conditioner for cabinet:
chip conveyor - auger:
chip conveyor with chip bucket:
ethernet interface:
:
signal lamp:
halogen lamp:
telescope cover for guideways:
machine semi-cover:
ce-design:
milling head:tramec a5tk
tool setter:optional verfügbar
workpiece measurement:heidenhain ts640+se660
cnc controller:heidenhain tnc 640+19\"lcd
scales:heidenhain
round table c-axis:dr630 mit encoder
spindle air purge:

standard accessories: 1. spindle cooler 2. spindle air blast 3. cutting coolant system 4. auto lubrication system 5. rigid tapping 6. air condition for electric cabinet 7. program end alarm light 8. usb/rs232 interface 9. oil skimmer 10. air/water cleaning equipment 11.dual screw type chip remover 12.steel-belt type chip conveyor with cart 13. operator\'s manual 14. working lamp 15. tool kit 16. x, y, z axis linear guideways(x,y axis ball,z axis roller) 17. x, y, z axis ballscrew(x.y axis ?63-p20,z axis ?50-p10) 18. semi enclosure splash guard(no roof) 19. foot switch for tool released 20. x axis telescopic cover+y axis javara cover 21. hanging type monitor+mpg 22. base leveling screw & foundation j-bolts 23.tramec a5tk speed max. 18.000 rpm power s1 28 kw constant from 3.000 rpm torque s1 90nm up to 3000rpm 24.electric box&operator door interlock 25.deeper chip conveyor 26.machine color:casting ral-5008,cover ral-7035 " style="height: 18px;"> X-TRAVEL:2200 MM
Y-TRAVEL:1300+650 MM
Z-TRAVEL:800 MM
DIMENSIONS OF THE MACHINE CA.:6,6 X 3,4 X 4 M
TABLE-SIZE:2000 X 1200 MM
DISTANCE BETWEEN COLUMNS:1400 (OHNE SPRITZSCHUTZ) MM
RAPID FEED IN AXIS-X,Y,Z:25/ 25/ 25 M/MIN.
SPINDLE NOSE:HSK-A63
SPINDLE SPEED:18000 1/MIN
SPINDLE DRIVE:28KW(S1),90NM(S1)
TOOL CHANGER:24 FACH
TABLE LOAD:10 T
MACHINE SIZE (LXWXH):6.4M/ 4.6M/ 5.0M MM
ROTARY TABLE DIAMETER:630 MM
SPINDLE COOLANT SYSTEM:
COOLING SYSTEM:
AUTOMATIC LUBRICATION SYSTEM:
RIGID TAPPING:
AIR CONDITIONER FOR CABINET:
CHIP CONVEYOR - AUGER:
CHIP CONVEYOR WITH CHIP BUCKET:
ETHERNET INTERFACE:
:
SIGNAL LAMP:
HALOGEN LAMP:
TELESCOPE COVER FOR GUIDEWAYS:
MACHINE SEMI-COVER:
CE-DESIGN:
MILLING HEAD:TRAMEC A5TK
TOOL SETTER:OPTIONAL VERFüGBAR
WORKPIECE MEASUREMENT:HEIDENHAIN TS640+SE660
CNC CONTROLLER:HEIDENHAIN TNC 640+19\"LCD
SCALES:HEIDENHAIN
ROUND TABLE C-AXIS:DR630 MIT ENCODER
SPINDLE AIR PURGE:

STANDARD ACCESSORIES: 1. SPINDLE COOLER 2. SPINDLE AIR BLAST 3. CUTTING COOLANT SYSTEM 4. AUTO LUBRICATION SYSTEM 5. RIGID TAPPING 6. AIR CONDITION FOR ELECTRIC CABINET 7. PROGRAM END ALARM LIGHT 8. USB/RS232 INTERFACE 9. OIL SKIMMER 10. AIR/WATER CLEANING EQUIPMENT 11.DUAL SCREW TYPE CHIP REMOVER 12.STEEL-BELT TYPE CHIP CONVEYOR WITH CART 13. OPERATOR\'S MANUAL 14. WORKING LAMP 15. TOOL KIT 16. X, Y, Z AXIS LINEAR GUIDEWAYS(X,Y AXIS BALL,Z AXIS ROLLER) 17. X, Y, Z AXIS BALLSCREW(X.Y AXIS ?63-P20,Z AXIS ?50-P10) 18. SEMI ENCLOSURE SPLASH GUARD(NO ROOF) 19. FOOT SWITCH FOR TOOL RELEASED 20. X AXIS TELESCOPIC COVER+Y AXIS JAVARA COVER 21. HANGING TYPE MONITOR+MPG 22. BASE LEVELING SCREW & FOUNDATION J-BOLTS 23.TRAMEC A5TK SPEED MAX. 18.000 RPM POWER S1 28 KW CONSTANT FROM 3.000 RPM TORQUE S1 90NM UP TO 3000RPM 24.ELECTRIC BOX&OPERATOR DOOR INTERLOCK 25.DEEPER CHIP CONVEYOR 26.MACHINE COLOR:CASTING RAL-5008,COVER RAL-7035
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-cassette for warehouse, about 1,539 cassettes, cassette length 6, 50 m, 3, 000 kg/kasstte - used -:
 
price on request!
 
manufacturer: fehr
year of construction: 2001
cassettes ges. 1,539 units
specification
1 electrically operated double table long good stack machine, automatically controlled, for the storage and retrieval of for good material, with the help of cassettes
technical data:
capacity 2x3000kg
bottom load table position above ground 700 mm
top load table position above ground 12110 mm
room height 13'450 mm
lifting speed 35 m / min
travel speed 80 m / min
pull-out speed 85 m / min
operating voltage, three-phase 400 v / 50 hz
control voltage 230 v / 50 hz
24 v dc
cassette type internal dimensions (wxhxl) a 520 x 270 x 6500 mm
type b 520 x 520 x 6500 mm
device performance at 100% load 46 ds / h
according to fem based on ub-3000 9.851
pull-out force on the cassette gripper (20% of the payload plus cartridge weight)
 
control automatically arranged using an automatic control over operating terminal, at the camp office
1. 1 double-sided track, length approx 29 m
to hang up on the concrete floor, consisting of:
the two rails of a 55, with the shocks, complete with attachment fittings and the limit stops. the rails are with fade-free special grout under poured.
2. 1 longitudinal-power supply, length approx 29 m, consisting of:
vahle plastic conductor line, with guard, complete with the mounting brackets.
3. 1 long goods stacking devices, consisting of:
camp 2 head straps welded design, with the chassis, this consisting of wã¤lzge controlled from the two engines with shaft mounted gearboxes built-on, as well as the 4 - crane wheels, with leadership roles, running laterally on the road,
2 columns in welded box construction, with the guides for the lifters from material performed st 52.3, screwed on the head straps, including the stiffening frame, as well as a ladder of descent,.
1 pallet truck, consisting of: the steel construction with the necessary rubber buffers for the two hã¶henend positions, the roller bearing support and leadership roles, the double cassette table with glides, the extractor, the centering with side guard rails to complete the box, complete with the runners for the gripper, the drive motors, sprockets, shafts, chains and electrical installation,
controls the horizontal, which â«fachbelegtâ».
as a hoist is used:
1 controlled engine
with intermediate gear (designed according to fem 3 m) and drum includes cords and ball-bearing pulleys; security 12, with double-grooved rope drum, dust-protected bearings drum bearing,
rope pulleys conditions according to din 15020.
4. electrical installation, comprising:
-the special cables, including all required terminal boxes, connecting cables fixed installed on the device
-the flexible power supply in cable caterpillar to the trucks,
-completely wired cabinet incl. contactor and the necessary controls, the mushroom-head pushbutton, which shuts off the main contactor (red mushroom can be rotated), switch with push button, key switch
-the two key selector switches, which are used for the pre-selection of the operating modes â«tip operation/automatic modeâ»,
the limit switches for the limitation of the lifting and moving
-the reciprocal locking of lifting and suspension compared to the ausziehvorâ¬
-direction, the laterally mounted clamping wires to the continuous control of the speed profile
-the profile control, which monitors whether the space between the shelf and device is free,
-the output fuse, which prevents that cassettes in a free space be outsourced,
-excess height control, which prevents a training and storage of high-loaded cartridges,
-the control of tape position on the table,
-the fault indicator in the control panel on the lift truck,
-the operating hour counters for driving and lifting mechanism
displacement measuring systems
the wear-free optical measuring system guarantees maximum service life and precise way capture of the x - and y-coordinates. the way capture of the two gripper through the absolute value encoder is located in the millimetre range. both systems deliver the absolutely correct readings again even after a power failure. thus it takes no movements for repositioning and the device starts working immediately without delay.
driving behavior
driving in the x and y axes is such that at the maximum possible speed infinitely variable over short or long distances optimal speed curves are driven. the behavior of the device dimensions at various distances is taken into account and flows as a control variable with a. the pendulum effect is compensated with counteract the driving curve characteristics,
learning functions
the computer software is so forward-looking that hardly a parameterization of various sizes must be done by the programmer. the software adaptation to different design types of device and storage compartments is done through the learning and self-learning onsite. following learning processes take place during commissioning on site:
-self-learning of the xy-driving behavior
-learning of the gripper behavior
-learning the transfer and recording places of the periphery
self learning the topology of all storage compartments of different arrangement and sizes
operating modes
-jog
the long good stacking device in the direction of travel, the truck and the two pull-out devices can be moved with the control buttons.
-semi automatic (automatic start-up), arranged in the stationary cupboard.
with the hand-held micro terminal, various movements are run separately or in combination automatically:
-driving horizontal
vertical lifting/lowering
-pull cassette
-slide tape
-positioning in front of the nearest
option
pc-cabinet for m fs calculator
execution: wxhxd 600 x 1900 x 600 mm
4-field 17 "monitor field of vision
part of front door for computer unit
integrated keyboard tray
storage compartment with removable rails
socket 100 mm
(ii) peripheral components, including:
1 1 carousel ka-3000 gr gr
for cassettes with rods
technical data:
capacity/capacity 3000 kg
number of pitches 4
conveying speed along 24 m / min
cross conveyor speed 40 m / min
height from top of floor 700 mm
operating voltage 400 v / 50 hz
control voltage 230 v / 50 hz
the cartridge space tracking via the automatic control. the carousel consists in particular of:
outsourcing train, consisting of:
-the steel foot plates and anchors, directly on the ground turned off and integrated into the shelf, suitable for the installation of the required mechanical parts
-the spezialgleitem, as well as the lateral guide
-the gripper mechanism, which contains the tape and transported to the next position positively
the gear motor with chain, the sprocket wheels and the chain guide
cross conveyor belt, comprising;
-two cassette courses, one of them as work provided
-the steel construction incl. foot plates and anchors, placed directly on the floor, suitable for the installation of the required mechanical parts
-the special gliders, as well as the lateral guide
-the querverschiebebalken as a driver for the cassettes
-the drive motor with the required drive elements
-the mechanical preparations for the load cells installation at the workplace
storage car, running such as paging railway
electrical control consisting of:
-the control panel with push buttons for all individual movements, including on/off button and emergency push button
-the position and control switches
-power and control supply
-firmly installed control cabinets with built-in control
-the necessary cables, as well as the internal wiring
the safety light barrier incl. mounting brackets, which perceives the person protection during cartridge movement
 
condition: used, the last maintenance was performed in 2017, shortly after it was mined professionally, so that it can be rebuilt at any time. the company which has degraded the plant could perform the installation.
available: available now
location: nuremberg CASSETTE FOR WAREHOUSE, ABOUT 1,539 CASSETTES, CASSETTE LENGTH 6, 50 M, 3, 000 KG/KASSTTE - USED -: PRICE ON REQUEST! MANUFACTURER: FEHR YEAR OF CONSTRUCTION: 2001 CASSETTES GES. 1,539 UNITS SPECIFICATION 1 ELECTRICALLY OPERATED DOUBLE TABLE LONG GOOD STACK MACHINE, AUTOMATICALLY CONTROLLED, FOR THE STORAGE AND RETRIEVAL OF FOR GOOD MATERIAL, WITH THE HELP OF CASSETTES TECHNICAL DATA: CAPACITY 2X3000KG BOTTOM LOAD TABLE POSITION ABOVE GROUND 700 MM TOP LOAD TABLE POSITION ABOVE GROUND 12110 MM ROOM HEIGHT 13'450 MM LIFTING SPEED 35 M / MIN TRAVEL SPEED 80 M / MIN PULL-OUT SPEED 85 M / MIN OPERATING VOLTAGE, THREE-PHASE 400 V / 50 HZ CONTROL VOLTAGE 230 V / 50 HZ 24 V DC CASSETTE TYPE INTERNAL DIMENSIONS (WXHXL) A 520 X 270 X 6500 MM TYPE B 520 X 520 X 6500 MM DEVICE PERFORMANCE AT 100% LOAD 46 DS / H ACCORDING TO FEM BASED ON UB-3000 9.851 PULL-OUT FORCE ON THE CASSETTE GRIPPER (20% OF THE PAYLOAD PLUS CARTRIDGE WEIGHT) CONTROL AUTOMATICALLY ARRANGED USING AN AUTOMATIC CONTROL OVER OPERATING TERMINAL, AT THE CAMP OFFICE 1. 1 DOUBLE-SIDED TRACK, LENGTH APPROX 29 M TO HANG UP ON THE CONCRETE FLOOR, CONSISTING OF: THE TWO RAILS OF A 55, WITH THE SHOCKS, COMPLETE WITH ATTACHMENT FITTINGS AND THE LIMIT STOPS. THE RAILS ARE WITH FADE-FREE SPECIAL GROUT UNDER POURED. 2. 1 LONGITUDINAL-POWER SUPPLY, LENGTH APPROX 29 M, CONSISTING OF: VAHLE PLASTIC CONDUCTOR LINE, WITH GUARD, COMPLETE WITH THE MOUNTING BRACKETS. 3. 1 LONG GOODS STACKING DEVICES, CONSISTING OF: CAMP 2 HEAD STRAPS WELDED DESIGN, WITH THE CHASSIS, THIS CONSISTING OF W&ATILDE;&CURREN;LZGE CONTROLLED FROM THE TWO ENGINES WITH SHAFT MOUNTED GEARBOXES BUILT-ON, AS WELL AS THE 4 - CRANE WHEELS, WITH LEADERSHIP ROLES, RUNNING LATERALLY ON THE ROAD, 2 COLUMNS IN WELDED BOX CONSTRUCTION, WITH THE GUIDES FOR THE LIFTERS FROM MATERIAL PERFORMED ST 52.3, SCREWED ON THE HEAD STRAPS, INCLUDING THE STIFFENING FRAME, AS WELL AS A LADDER OF DESCENT,. 1 PALLET TRUCK, CONSISTING OF: THE STEEL CONSTRUCTION WITH THE NECESSARY RUBBER BUFFERS FOR THE TWO H&ATILDE;&PARA;HENEND POSITIONS, THE ROLLER BEARING SUPPORT AND LEADERSHIP ROLES, THE DOUBLE CASSETTE TABLE WITH GLIDES, THE EXTRACTOR, THE CENTERING WITH SIDE GUARD RAILS TO COMPLETE THE BOX, COMPLETE WITH THE RUNNERS FOR THE GRIPPER, THE DRIVE MOTORS, SPROCKETS, SHAFTS, CHAINS AND ELECTRICAL INSTALLATION, CONTROLS THE HORIZONTAL, WHICH &ACIRC;&LAQUO;FACHBELEGT&ACIRC;&RAQUO;. AS A HOIST IS USED: 1 CONTROLLED ENGINE WITH INTERMEDIATE GEAR (DESIGNED ACCORDING TO FEM 3 M) AND DRUM INCLUDES CORDS AND BALL-BEARING PULLEYS; SECURITY 12, WITH DOUBLE-GROOVED ROPE DRUM, DUST-PROTECTED BEARINGS DRUM BEARING, ROPE PULLEYS CONDITIONS ACCORDING TO DIN 15020. 4. ELECTRICAL INSTALLATION, COMPRISING: -THE SPECIAL CABLES, INCLUDING ALL REQUIRED TERMINAL BOXES, CONNECTING CABLES FIXED INSTALLED ON THE DEVICE -THE FLEXIBLE POWER SUPPLY IN CABLE CATERPILLAR TO THE TRUCKS, -COMPLETELY WIRED CABINET INCL. CONTACTOR AND THE NECESSARY CONTROLS, THE MUSHROOM-HEAD PUSHBUTTON, WHICH SHUTS OFF THE MAIN CONTACTOR (RED MUSHROOM CAN BE ROTATED), SWITCH WITH PUSH BUTTON, KEY SWITCH -THE TWO KEY SELECTOR SWITCHES, WHICH ARE USED FOR THE PRE-SELECTION OF THE OPERATING MODES &ACIRC;&LAQUO;TIP OPERATION/AUTOMATIC MODE&ACIRC;&RAQUO;, THE LIMIT SWITCHES FOR THE LIMITATION OF THE LIFTING AND MOVING -THE RECIPROCAL LOCKING OF LIFTING AND SUSPENSION COMPARED TO THE AUSZIEHVOR&ACIRC;&NOT; -DIRECTION, THE LATERALLY MOUNTED CLAMPING WIRES TO THE CONTINUOUS CONTROL OF THE SPEED PROFILE -THE PROFILE CONTROL, WHICH MONITORS WHETHER THE SPACE BETWEEN THE SHELF AND DEVICE IS FREE, -THE OUTPUT FUSE, WHICH PREVENTS THAT CASSETTES IN A FREE SPACE BE OUTSOURCED, -EXCESS HEIGHT CONTROL, WHICH PREVENTS A TRAINING AND STORAGE OF HIGH-LOADED CARTRIDGES, -THE CONTROL OF TAPE POSITION ON THE TABLE, -THE FAULT INDICATOR IN THE CONTROL PANEL ON THE LIFT TRUCK, -THE OPERATING HOUR COUNTERS FOR DRIVING AND LIFTING MECHANISM DISPLACEMENT MEASURING SYSTEMS THE WEAR-FREE OPTICAL MEASURING SYSTEM GUARANTEES MAXIMUM SERVICE LIFE AND PRECISE WAY CAPTURE OF THE X - AND Y-COORDINATES. THE WAY CAPTURE OF THE TWO GRIPPER THROUGH THE ABSOLUTE VALUE ENCODER IS LOCATED IN THE MILLIMETRE RANGE. BOTH SYSTEMS DELIVER THE ABSOLUTELY CORRECT READINGS AGAIN EVEN AFTER A POWER FAILURE. THUS IT TAKES NO MOVEMENTS FOR REPOSITIONING AND THE DEVICE STARTS WORKING IMMEDIATELY WITHOUT DELAY. DRIVING BEHAVIOR DRIVING IN THE X AND Y AXES IS SUCH THAT AT THE MAXIMUM POSSIBLE SPEED INFINITELY VARIABLE OVER SHORT OR LONG DISTANCES OPTIMAL SPEED CURVES ARE DRIVEN. THE BEHAVIOR OF THE DEVICE DIMENSIONS AT VARIOUS DISTANCES IS TAKEN INTO ACCOUNT AND FLOWS AS A CONTROL VARIABLE WITH A. THE PENDULUM EFFECT IS COMPENSATED WITH COUNTERACT THE DRIVING CURVE CHARACTERISTICS, LEARNING FUNCTIONS THE COMPUTER SOFTWARE IS SO FORWARD-LOOKING THAT HARDLY A PARAMETERIZATION OF VARIOUS SIZES MUST BE DONE BY THE PROGRAMMER. THE SOFTWARE ADAPTATION TO DIFFERENT DESIGN TYPES OF DEVICE AND STORAGE COMPARTMENTS IS DONE THROUGH THE LEARNING AND SELF-LEARNING ONSITE. FOLLOWING LEARNING PROCESSES TAKE PLACE DURING COMMISSIONING ON SITE: -SELF-LEARNING OF THE XY-DRIVING BEHAVIOR -LEARNING OF THE GRIPPER BEHAVIOR -LEARNING THE TRANSFER AND RECORDING PLACES OF THE PERIPHERY SELF LEARNING THE TOPOLOGY OF ALL STORAGE COMPARTMENTS OF DIFFERENT ARRANGEMENT AND SIZES OPERATING MODES -JOG THE LONG GOOD STACKING DEVICE IN THE DIRECTION OF TRAVEL, THE TRUCK AND THE TWO PULL-OUT DEVICES CAN BE MOVED WITH THE CONTROL BUTTONS. -SEMI AUTOMATIC (AUTOMATIC START-UP), ARRANGED IN THE STATIONARY CUPBOARD. WITH THE HAND-HELD MICRO TERMINAL, VARIOUS MOVEMENTS ARE RUN SEPARATELY OR IN COMBINATION AUTOMATICALLY: -DRIVING HORIZONTAL VERTICAL LIFTING/LOWERING -PULL CASSETTE -SLIDE TAPE -POSITIONING IN FRONT OF THE NEAREST OPTION PC-CABINET FOR M FS CALCULATOR EXECUTION: WXHXD 600 X 1900 X 600 MM 4-FIELD 17 "MONITOR FIELD OF VISION PART OF FRONT DOOR FOR COMPUTER UNIT INTEGRATED KEYBOARD TRAY STORAGE COMPARTMENT WITH REMOVABLE RAILS SOCKET 100 MM (II) PERIPHERAL COMPONENTS, INCLUDING: 1 1 CAROUSEL KA-3000 GR GR FOR CASSETTES WITH RODS TECHNICAL DATA: CAPACITY/CAPACITY 3000 KG NUMBER OF PITCHES 4 CONVEYING SPEED ALONG 24 M / MIN CROSS CONVEYOR SPEED 40 M / MIN HEIGHT FROM TOP OF FLOOR 700 MM OPERATING VOLTAGE 400 V / 50 HZ CONTROL VOLTAGE 230 V / 50 HZ THE CARTRIDGE SPACE TRACKING VIA THE AUTOMATIC CONTROL. THE CAROUSEL CONSISTS IN PARTICULAR OF: OUTSOURCING TRAIN, CONSISTING OF: -THE STEEL FOOT PLATES AND ANCHORS, DIRECTLY ON THE GROUND TURNED OFF AND INTEGRATED INTO THE SHELF, SUITABLE FOR THE INSTALLATION OF THE REQUIRED MECHANICAL PARTS -THE SPEZIALGLEITEM, AS WELL AS THE LATERAL GUIDE -THE GRIPPER MECHANISM, WHICH CONTAINS THE TAPE AND TRANSPORTED TO THE NEXT POSITION POSITIVELY THE GEAR MOTOR WITH CHAIN, THE SPROCKET WHEELS AND THE CHAIN GUIDE CROSS CONVEYOR BELT, COMPRISING; -TWO CASSETTE COURSES, ONE OF THEM AS WORK PROVIDED -THE STEEL CONSTRUCTION INCL. FOOT PLATES AND ANCHORS, PLACED DIRECTLY ON THE FLOOR, SUITABLE FOR THE INSTALLATION OF THE REQUIRED MECHANICAL PARTS -THE SPECIAL GLIDERS, AS WELL AS THE LATERAL GUIDE -THE QUERVERSCHIEBEBALKEN AS A DRIVER FOR THE CASSETTES -THE DRIVE MOTOR WITH THE REQUIRED DRIVE ELEMENTS -THE MECHANICAL PREPARATIONS FOR THE LOAD CELLS INSTALLATION AT THE WORKPLACE STORAGE CAR, RUNNING SUCH AS PAGING RAILWAY ELECTRICAL CONTROL CONSISTING OF: -THE CONTROL PANEL WITH PUSH BUTTONS FOR ALL INDIVIDUAL MOVEMENTS, INCLUDING ON/OFF BUTTON AND EMERGENCY PUSH BUTTON -THE POSITION AND CONTROL SWITCHES -POWER AND CONTROL SUPPLY -FIRMLY INSTALLED CONTROL CABINETS WITH BUILT-IN CONTROL -THE NECESSARY CABLES, AS WELL AS THE INTERNAL WIRING THE SAFETY LIGHT BARRIER INCL. MOUNTING BRACKETS, WHICH PERCEIVES THE PERSON PROTECTION DURING CARTRIDGE MOVEMENT CONDITION: USED, THE LAST MAINTENANCE WAS PERFORMED IN 2017, SHORTLY AFTER IT WAS MINED PROFESSIONALLY, SO THAT IT CAN BE REBUILT AT ANY TIME. THE COMPANY WHICH HAS DEGRADED THE PLANT COULD PERFORM THE INSTALLATION. AVAILABLE: AVAILABLE NOW LOCATION: NUREMBERG
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-grinding length:600 mm<br/>grinding width:550 mm<br/>workpiece height:600 mm<br/>surface area:1000x450 mm<br/>max. table load:250 kg<br/>spindle drive:15 ps<br/>hydraulic pump engine:1,9/3,9 ps<br/>cross feed motor:0,75 ps<br/>:1400x1900 mm<br/>grinding wheel speeds:1400 u/min<br/>total power requirement:18 kw<br/>weight of the machine ca.:4100 kg<br/><br/>used / overhauled surface grinding machine, make elb, type swb 06 va ii-k, machine no. 114461172  machine with automatic notification in all 3 axes.  machine completely dismantled, cleaned all the components thoroughly and checked for complete functionality. wear parts replaced defective components reparariert or replaced. reassembly, compl. functional testing and internal loss. machine in absolute working condition. machine repainted. machine in perfect, produktionsbereitem state.  accessories: - electric magnetic chuck with coarse / fine pole pitch, dimensions 600x500 mm - demagnetisiereinrichtung installed in the control cabinet - manual micrometric abrichtapparat mounted above the grinding wheel - 1 piece grinding wheel - complete coolant system - setting up / leveling -. technical documentation in german  all machines are connected prior to delivery, tested and verified all of the functions.  payment: 100% before loading the machine warranty: no  fig. similar. GRINDING LENGTH:600 MM
GRINDING WIDTH:550 MM
WORKPIECE HEIGHT:600 MM
SURFACE AREA:1000X450 MM
MAX. TABLE LOAD:250 KG
SPINDLE DRIVE:15 PS
HYDRAULIC PUMP ENGINE:1,9/3,9 PS
CROSS FEED MOTOR:0,75 PS
:1400X1900 MM
GRINDING WHEEL SPEEDS:1400 U/MIN
TOTAL POWER REQUIREMENT:18 KW
WEIGHT OF THE MACHINE CA.:4100 KG

USED / OVERHAULED SURFACE GRINDING MACHINE, MAKE ELB, TYPE SWB 06 VA II-K, MACHINE NO. 114461172 MACHINE WITH AUTOMATIC NOTIFICATION IN ALL 3 AXES. MACHINE COMPLETELY DISMANTLED, CLEANED ALL THE COMPONENTS THOROUGHLY AND CHECKED FOR COMPLETE FUNCTIONALITY. WEAR PARTS REPLACED DEFECTIVE COMPONENTS REPARARIERT OR REPLACED. REASSEMBLY, COMPL. FUNCTIONAL TESTING AND INTERNAL LOSS. MACHINE IN ABSOLUTE WORKING CONDITION. MACHINE REPAINTED. MACHINE IN PERFECT, PRODUKTIONSBEREITEM STATE. ACCESSORIES: - ELECTRIC MAGNETIC CHUCK WITH COARSE / FINE POLE PITCH, DIMENSIONS 600X500 MM - DEMAGNETISIEREINRICHTUNG INSTALLED IN THE CONTROL CABINET - MANUAL MICROMETRIC ABRICHTAPPARAT MOUNTED ABOVE THE GRINDING WHEEL - 1 PIECE GRINDING WHEEL - COMPLETE COOLANT SYSTEM - SETTING UP / LEVELING -. TECHNICAL DOCUMENTATION IN GERMAN ALL MACHINES ARE CONNECTED PRIOR TO DELIVERY, TESTED AND VERIFIED ALL OF THE FUNCTIONS. PAYMENT: 100% BEFORE LOADING THE MACHINE WARRANTY: NO FIG. SIMILAR.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 8.820 €
Ubicación: Land-thread cutting device
freischneiden setup
drilling depth shut off programmable
drilling depth and speed display - digital
thread cutting device m30 (depending on elevation)
r1 spindle speed with continuous transmission speed series 100-2000 1 / min
r2 spindle speed with continuous transmission speed range 70-1400 1/min
drilling capacity 35/40 mm
spindle mk 4
drilling depth 160 mm
throat depth 300 mm
usable surface (pivoting) 590 x 450 mm
feed 0-300 mm / min stepless
table height with rack and pinion
machine dimensions (w x d x h) 610 x 850 x 1920 mm
motor three-phase 400 v pole changing bar 1,5/3,0 kw
weight 420 kg

including drilling package consisting: taper mandrel, chuck, vice and t - groove set. 
option: spindle stop and modulus of rupture of chip 660 eur

delivery: free house including packaging

not the right machine?
we do also other afloat products - ask for a quote!

flott base partner *. THREAD CUTTING DEVICE FREISCHNEIDEN SETUP DRILLING DEPTH SHUT OFF PROGRAMMABLE DRILLING DEPTH AND SPEED DISPLAY - DIGITAL THREAD CUTTING DEVICE M30 (DEPENDING ON ELEVATION) R1 SPINDLE SPEED WITH CONTINUOUS TRANSMISSION SPEED SERIES 100-2000 1 / MIN R2 SPINDLE SPEED WITH CONTINUOUS TRANSMISSION SPEED RANGE 70-1400 1/MIN DRILLING CAPACITY 35/40 MM SPINDLE MK 4 DRILLING DEPTH 160 MM THROAT DEPTH 300 MM USABLE SURFACE (PIVOTING) 590 X 450 MM FEED 0-300 MM / MIN STEPLESS TABLE HEIGHT WITH RACK AND PINION MACHINE DIMENSIONS (W X D X H) 610 X 850 X 1920 MM MOTOR THREE-PHASE 400 V POLE CHANGING BAR 1,5/3,0 KW WEIGHT 420 KG INCLUDING DRILLING PACKAGE CONSISTING: TAPER MANDREL, CHUCK, VICE AND T - GROOVE SET. OPTION: SPINDLE STOP AND MODULUS OF RUPTURE OF CHIP 660 EUR DELIVERY: FREE HOUSE INCLUDING PACKAGING NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER *.
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Ubicación: Land-x-travel:8500 mm<br/>y-travel:4300 mm<br/>z-travel:1066 mm<br/>distance spindle nose and clamping angle:300-1366 mm<br/>distance between columns:3500 mm<br/>table-size:8000x3100 mm<br/>table load:30000 kg<br/>t-slot (width-distance-quantity): mm<br/>spindle taper:50 bt<br/>spindle speed:vertikal: 6000 1/min; horizontal: 2000 1/min <br/>spindle drive:30 kw<br/>spindle motor torque: n.m.<br/>rapid traverse in x-y-z axis: mm/min<br/>cutting feed rate x/y/z axis: mm/min<br/>tool changer:60 <br/>max. tool diameter: mm<br/>max. tool length: mm<br/>max. tool weight: kg<br/>total power requirement: kva<br/>weight approx.: t<br/>machine size (lxwxh): mm<br/>cnc controller:siemens 840 <br/>rigid tapping: <br/>inner coolant: <br/>scales:von heidenhain in allen 3 achsen <br/>automatic tool changer:vertikal/horizontal 60- fach<br/>tool setter:von renishaw ts-27 <br/>fully enclosed:(oben offen) <br/>cutting air blast: <br/>automatic head changer 4 positions:inkl.90° kopf & verlängerung <br/>ce-design: <br/>tool box: <br/>working lamp: <br/>signal lamp: <br/>heat exchanger: <br/>: <br/>automatic lubrication system: <br/>automatically power off: <br/>chip conveyor with chip bucket: <br/>levellig elements: <br/>foundation bolts: <br/><br/> X-TRAVEL:8500 MM
Y-TRAVEL:4300 MM
Z-TRAVEL:1066 MM
DISTANCE SPINDLE NOSE AND CLAMPING ANGLE:300-1366 MM
DISTANCE BETWEEN COLUMNS:3500 MM
TABLE-SIZE:8000X3100 MM
TABLE LOAD:30000 KG
T-SLOT (WIDTH-DISTANCE-QUANTITY): MM
SPINDLE TAPER:50 BT
SPINDLE SPEED:VERTIKAL: 6000 1/MIN; HORIZONTAL: 2000 1/MIN
SPINDLE DRIVE:30 KW
SPINDLE MOTOR TORQUE: N.M.
RAPID TRAVERSE IN X-Y-Z AXIS: MM/MIN
CUTTING FEED RATE X/Y/Z AXIS: MM/MIN
TOOL CHANGER:60
MAX. TOOL DIAMETER: MM
MAX. TOOL LENGTH: MM
MAX. TOOL WEIGHT: KG
TOTAL POWER REQUIREMENT: KVA
WEIGHT APPROX.: T
MACHINE SIZE (LXWXH): MM
CNC CONTROLLER:SIEMENS 840
RIGID TAPPING:
INNER COOLANT:
SCALES:VON HEIDENHAIN IN ALLEN 3 ACHSEN
AUTOMATIC TOOL CHANGER:VERTIKAL/HORIZONTAL 60- FACH
TOOL SETTER:VON RENISHAW TS-27
FULLY ENCLOSED:(OBEN OFFEN)
CUTTING AIR BLAST:
AUTOMATIC HEAD CHANGER 4 POSITIONS:INKL.90° KOPF & VERLäNGERUNG
CE-DESIGN:
TOOL BOX:
WORKING LAMP:
SIGNAL LAMP:
HEAT EXCHANGER:
:
AUTOMATIC LUBRICATION SYSTEM:
AUTOMATICALLY POWER OFF:
CHIP CONVEYOR WITH CHIP BUCKET:
LEVELLIG ELEMENTS:
FOUNDATION BOLTS:

Vendedor: GK Werkzeugmaschinen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)