82 ofertas

Año de construcción: usado
Ubicación: Land-four-side planer weinig ag h22b sp
attention with a set of new tools on the machine
location

gorzów wlkp.
conditions of delivery

own receipt
cost of delivery

customer cover
start type

to be agreed
description
comments

weinig type turning plaster lamel or hammer blasting. horizontal level size max mm 230 main motors cutting boards 30 kw x 2 for this feed and lifting total 70 kw, machine after major refurbishment
material width min mm 20
material thickness max mm 200
material thickness min mm 8
longitudinal treatment stations 2
feedrate max m / min 36
stepless feed yes
ce mark yes
availability location in the warehouse of lignum k?odawa
ready to work FOUR-SIDE PLANER WEINIG AG H22B SP ATTENTION WITH A SET OF NEW TOOLS ON THE MACHINE LOCATION GORZóW WLKP. CONDITIONS OF DELIVERY OWN RECEIPT COST OF DELIVERY CUSTOMER COVER START TYPE TO BE AGREED DESCRIPTION COMMENTS WEINIG TYPE TURNING PLASTER LAMEL OR HAMMER BLASTING. HORIZONTAL LEVEL SIZE MAX MM 230 MAIN MOTORS CUTTING BOARDS 30 KW X 2 FOR THIS FEED AND LIFTING TOTAL 70 KW, MACHINE AFTER MAJOR REFURBISHMENT MATERIAL WIDTH MIN MM 20 MATERIAL THICKNESS MAX MM 200 MATERIAL THICKNESS MIN MM 8 LONGITUDINAL TREATMENT STATIONS 2 FEEDRATE MAX M / MIN 36 STEPLESS FEED YES CE MARK YES AVAILABILITY LOCATION IN THE WAREHOUSE OF LIGNUM K?ODAWA READY TO WORK
Vendedor: PPHU Lignum Przemysław Kretowicz
Año de construcción: usado
Precio: 30.120 €
Ubicación: Land-machinery and equipment for paper and bookbinding
on exclusive sale next 24 january 2019 at 10-00 at our offices in bergamo
check out our mercury auctions website for a direct download of the full call for applications and catalogue, or contact us at 030 7751645 office hours 9-13, 14:18
machinery:
-trainer for boxes brand, freshman 737 series type icmi cg50 beta, year 1990, size cm 41x61 h. 48 cm-press for hot printing brand c6113 p1520at1 type semiautomatic, freshman year, cicrespi 2000-machine, creasing and folding machine with storage envelopes, brand name kora packmat, 992233008, reibanleger, lb type year 2003-machine series # incellophanatrice make kora packmat, 1681, freshman year 1992, consisting of n. 4 machines, mod. ztm 1742, vkm 45 1722-1730, 100/1681, asm vbm incellophanatrice kora packmat brand machine, size cm 19x25, serial number 1583, year 1990, consisting of # 3 machines, mod. ztm 1583, vfm 102/1576, vbm 45 1589
-compressor brand mark compressors, 10 bar, with 15 kw model nsb – dehumidifier brand friulair dryers and storage tank 500 lt
-compressor brand mark compressors, 7.5/10, 2002 year, msa template with storage tank 100 lt
-280 mt of iron corner rack
furniture and equipment
-trapani-hand pallet trucks, electric
-fork
-work tables
-cabinets and lockers, desks, chairs
  MACHINERY AND EQUIPMENT FOR PAPER AND BOOKBINDING ON EXCLUSIVE SALE NEXT 24 JANUARY 2019 AT 10-00 AT OUR OFFICES IN BERGAMO CHECK OUT OUR MERCURY AUCTIONS WEBSITE FOR A DIRECT DOWNLOAD OF THE FULL CALL FOR APPLICATIONS AND CATALOGUE, OR CONTACT US AT 030 7751645 OFFICE HOURS 9-13, 14:18 MACHINERY: -TRAINER FOR BOXES BRAND, FRESHMAN 737 SERIES TYPE ICMI CG50 BETA, YEAR 1990, SIZE CM 41X61 H. 48 CM-PRESS FOR HOT PRINTING BRAND C6113 P1520AT1 TYPE SEMIAUTOMATIC, FRESHMAN YEAR, CICRESPI 2000-MACHINE, CREASING AND FOLDING MACHINE WITH STORAGE ENVELOPES, BRAND NAME KORA PACKMAT, 992233008, REIBANLEGER, LB TYPE YEAR 2003-MACHINE SERIES # INCELLOPHANATRICE MAKE KORA PACKMAT, 1681, FRESHMAN YEAR 1992, CONSISTING OF N. 4 MACHINES, MOD. ZTM 1742, VKM 45 1722-1730, 100/1681, ASM VBM INCELLOPHANATRICE KORA PACKMAT BRAND MACHINE, SIZE CM 19X25, SERIAL NUMBER 1583, YEAR 1990, CONSISTING OF # 3 MACHINES, MOD. ZTM 1583, VFM 102/1576, VBM 45 1589 -COMPRESSOR BRAND MARK COMPRESSORS, 10 BAR, WITH 15 KW MODEL NSB – DEHUMIDIFIER BRAND FRIULAIR DRYERS AND STORAGE TANK 500 LT -COMPRESSOR BRAND MARK COMPRESSORS, 7.5/10, 2002 YEAR, MSA TEMPLATE WITH STORAGE TANK 100 LT -280 MT OF IRON CORNER RACK FURNITURE AND EQUIPMENT -TRAPANI-HAND PALLET TRUCKS, ELECTRIC -FORK -WORK TABLES -CABINETS AND LOCKERS, DESKS, CHAIRS
Vendedor: Mercury Auctions s.r.l.
Año de construcción: usado
Ubicación: Land-copying lathe for round dishes, stool seats etc<br/>workpiece diameter max. ca. 700 mm.<br/>motor ca. 10 kw<br/>3 frontal and 2 transversal copying units,  hydraulic stroke<br/>vakuum-clamping<br/>manual feed COPYING LATHE FOR ROUND DISHES, STOOL SEATS ETC
WORKPIECE DIAMETER MAX. CA. 700 MM.
MOTOR CA. 10 KW
3 FRONTAL AND 2 TRANSVERSAL COPYING UNITS, HYDRAULIC STROKE
VAKUUM-CLAMPING
MANUAL FEED
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-description
this is a used ve-50 aerator mixing machine from mondomix with a working capacity of between 1000 - 3000 litres per hour. the machine can be used for the continuous mixing and aerating of different types of marshmallow, batters, fillings and foams. the mousse product can range from light and fluffy to creamy and thick, depending on preparation techniques. dessert mousses are typically made with whipped egg whites or whipped cream, flavored with chocolate, coffee, caramel, pureed fruits or various herbs and spices, such as mint or vanilla. 

features           
•manufacturer: mondomix 
•model: ve-50
•function: aerator / creaming machine 
•capacity: 1.000 - 3.000 litres / per hour
•serial number: p13212 
•year of manufacture: 1998
•max. working pressure: 10 bar 
•total installed power: 20 kw
•electrics: 400v / 3phase / 50hz
•stainless steel construction 

country of manufacture                
•netherlands


  DESCRIPTION THIS IS A USED VE-50 AERATOR MIXING MACHINE FROM MONDOMIX WITH A WORKING CAPACITY OF BETWEEN 1000 - 3000 LITRES PER HOUR. THE MACHINE CAN BE USED FOR THE CONTINUOUS MIXING AND AERATING OF DIFFERENT TYPES OF MARSHMALLOW, BATTERS, FILLINGS AND FOAMS. THE MOUSSE PRODUCT CAN RANGE FROM LIGHT AND FLUFFY TO CREAMY AND THICK, DEPENDING ON PREPARATION TECHNIQUES. DESSERT MOUSSES ARE TYPICALLY MADE WITH WHIPPED EGG WHITES OR WHIPPED CREAM, FLAVORED WITH CHOCOLATE, COFFEE, CARAMEL, PUREED FRUITS OR VARIOUS HERBS AND SPICES, SUCH AS MINT OR VANILLA. FEATURES •MANUFACTURER: MONDOMIX •MODEL: VE-50 •FUNCTION: AERATOR / CREAMING MACHINE •CAPACITY: 1.000 - 3.000 LITRES / PER HOUR •SERIAL NUMBER: P13212 •YEAR OF MANUFACTURE: 1998 •MAX. WORKING PRESSURE: 10 BAR •TOTAL INSTALLED POWER: 20 KW •ELECTRICS: 400V / 3PHASE / 50HZ •STAINLESS STEEL CONSTRUCTION COUNTRY OF MANUFACTURE •NETHERLANDS
Vendedor: Machinery World Ltd
Año de construcción: usado
Precio: 300 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-high-performance circular saw machine
kastowa c7, built in 2004
top condition, magazine, nc measuring stop up to 1000 mm, sorting table in the spout, chip conveyor, minimal lubrication.

kastowa c 7

cutting areas:

saw blade diameter, number of teeth 250 x 80 z 250 x 60 z z 285 x 60 mm
saw blade holder 32/4 x 9/50 32/4 x 9/50 32/4 x 9/50 mm
saw blade inner flange 110 110 110 mm

cutting capacity round solid material 15-30 25 - 50 40-70 ã? mm
cutting capacity rectangular solid material 15-30 25-50 30-60 mm
cutting range, rectangle
full material of 15 x 15, 15 x 15, 30 x 10 mm
up to 30 x 30 50 x 50 70 x 60 mm

dimensions and weights:

length 1,000 mm
about 1,600 mm wide
height approx. 2.050 mm
material height above floor 1000 mm
weight approx. 1.500 kg

performance characteristics:

blade 5.5 kw
hydraulic 1.4/1.8 kw
coolant pump 0.12 kw
cutting speed,
adjustable 35-140 35-140 40-160 m / min

saw speed infinitely adjustable approx. 25 - 1,000 mm / min
urgent return approx. 8,000 mm / min

workpiece clamping
clamping force adjustable 8,000-2,000 n

material supply
supply wagons lead 7.5-80 m / min
rapid replenishment cr 80 m / min

helical magazine
rod length 1,600-6,000 mm
support depth 750 mm
maximum single bar weight 200 kg
total loading of 2,000 kg

maximum permissible material krummheit 2 mm / m

painting: machine light grey ral 7035 textured finish

compressed air connection: approx. 6 bar required

pos. 1575 nc section measuring stop for section lengths
20-1,000 mm

with hydraulic damping and tuning, slider roller centred on flat management, travels by frequency-controlled three-phase brake motor threaded spindle.
positioning speed: maximum 4,5 m / min
running-in accuracy: 0.05 mm
automatic section adjustment by means of nc control, according to prefix with operator terminal, with digital display of the measuring position (actual value), record number, nominal value and piece number can be entered for 20 sets, i.e. 20 different section lengths and corresponding number of units (max. 30,000).

switchable operation:
(a) the entered records with the section lengths and quantities are processed one after the other, despite the resulting residual length. automatic reloading of the material bars.
(b) any downloaded material bar on saw after sawing cut automatically in the selected section lengths and quantities (program), therefore possibility of minimizing the rest length. automatic reloading of the material bars is made by area code of the number of program repeats. by entering the number of program repeats, the possibility to determine the sawn section number in different lengths.

pos. 1580 section length section reception bar
15-1,000 mm

only in conjunction with pos. 1560 measuring stop for section lengths 15-1,000 mm.
pneumatically operated, installed over the roll-off ramp of the tilting table to reduce speed and to align the sections

HIGH-PERFORMANCE CIRCULAR SAW MACHINE KASTOWA C7, BUILT IN 2004 TOP CONDITION, MAGAZINE, NC MEASURING STOP UP TO 1000 MM, SORTING TABLE IN THE SPOUT, CHIP CONVEYOR, MINIMAL LUBRICATION. KASTOWA C 7 CUTTING AREAS: SAW BLADE DIAMETER, NUMBER OF TEETH 250 X 80 Z 250 X 60 Z Z 285 X 60 MM SAW BLADE HOLDER 32/4 X 9/50 32/4 X 9/50 32/4 X 9/50 MM SAW BLADE INNER FLANGE 110 110 110 MM CUTTING CAPACITY ROUND SOLID MATERIAL 15-30 25 - 50 40-70 &ATILDE;? MM CUTTING CAPACITY RECTANGULAR SOLID MATERIAL 15-30 25-50 30-60 MM CUTTING RANGE, RECTANGLE FULL MATERIAL OF 15 X 15, 15 X 15, 30 X 10 MM UP TO 30 X 30 50 X 50 70 X 60 MM DIMENSIONS AND WEIGHTS: LENGTH 1,000 MM ABOUT 1,600 MM WIDE HEIGHT APPROX. 2.050 MM MATERIAL HEIGHT ABOVE FLOOR 1000 MM WEIGHT APPROX. 1.500 KG PERFORMANCE CHARACTERISTICS: BLADE 5.5 KW HYDRAULIC 1.4/1.8 KW COOLANT PUMP 0.12 KW CUTTING SPEED, ADJUSTABLE 35-140 35-140 40-160 M / MIN SAW SPEED INFINITELY ADJUSTABLE APPROX. 25 - 1,000 MM / MIN URGENT RETURN APPROX. 8,000 MM / MIN WORKPIECE CLAMPING CLAMPING FORCE ADJUSTABLE 8,000-2,000 N MATERIAL SUPPLY SUPPLY WAGONS LEAD 7.5-80 M / MIN RAPID REPLENISHMENT CR 80 M / MIN HELICAL MAGAZINE ROD LENGTH 1,600-6,000 MM SUPPORT DEPTH 750 MM MAXIMUM SINGLE BAR WEIGHT 200 KG TOTAL LOADING OF 2,000 KG MAXIMUM PERMISSIBLE MATERIAL KRUMMHEIT 2 MM / M PAINTING: MACHINE LIGHT GREY RAL 7035 TEXTURED FINISH COMPRESSED AIR CONNECTION: APPROX. 6 BAR REQUIRED POS. 1575 NC SECTION MEASURING STOP FOR SECTION LENGTHS 20-1,000 MM WITH HYDRAULIC DAMPING AND TUNING, SLIDER ROLLER CENTRED ON FLAT MANAGEMENT, TRAVELS BY FREQUENCY-CONTROLLED THREE-PHASE BRAKE MOTOR THREADED SPINDLE. POSITIONING SPEED: MAXIMUM 4,5 M / MIN RUNNING-IN ACCURACY: 0.05 MM AUTOMATIC SECTION ADJUSTMENT BY MEANS OF NC CONTROL, ACCORDING TO PREFIX WITH OPERATOR TERMINAL, WITH DIGITAL DISPLAY OF THE MEASURING POSITION (ACTUAL VALUE), RECORD NUMBER, NOMINAL VALUE AND PIECE NUMBER CAN BE ENTERED FOR 20 SETS, I.E. 20 DIFFERENT SECTION LENGTHS AND CORRESPONDING NUMBER OF UNITS (MAX. 30,000). SWITCHABLE OPERATION: (A) THE ENTERED RECORDS WITH THE SECTION LENGTHS AND QUANTITIES ARE PROCESSED ONE AFTER THE OTHER, DESPITE THE RESULTING RESIDUAL LENGTH. AUTOMATIC RELOADING OF THE MATERIAL BARS. (B) ANY DOWNLOADED MATERIAL BAR ON SAW AFTER SAWING CUT AUTOMATICALLY IN THE SELECTED SECTION LENGTHS AND QUANTITIES (PROGRAM), THEREFORE POSSIBILITY OF MINIMIZING THE REST LENGTH. AUTOMATIC RELOADING OF THE MATERIAL BARS IS MADE BY AREA CODE OF THE NUMBER OF PROGRAM REPEATS. BY ENTERING THE NUMBER OF PROGRAM REPEATS, THE POSSIBILITY TO DETERMINE THE SAWN SECTION NUMBER IN DIFFERENT LENGTHS. POS. 1580 SECTION LENGTH SECTION RECEPTION BAR 15-1,000 MM ONLY IN CONJUNCTION WITH POS. 1560 MEASURING STOP FOR SECTION LENGTHS 15-1,000 MM. PNEUMATICALLY OPERATED, INSTALLED OVER THE ROLL-OFF RAMP OF THE TILTING TABLE TO REDUCE SPEED AND TO ALIGN THE SECTIONS
Vendedor: Krause Maschinenhandels & Service GmbH
Año de construcción: usado
Ubicación: Land-voltage: 400 v v<br/>infeed of wheel carriage: 100 mm<br/>working area: 2 - 40 mm<br/>max. dia. of grinding wheel: 100 mm<br/>air pressure - required: 6 bar<br/>drive capacity - spindle motor: 2,2 kw<br/>coolant pump: 0,16 kw<br/>weight: 0,35 t<br/>optical condition: very good:  <br/>mechanic: very good:  <br/>the machine can be viewed under current.:  <br/>0013 hs<br/>400 v. 50 hz, color: gray-black<br/><br/><br/>accessories:<br/>* 1 collet eac 173 e, 4, 6,8, 10, 12, 14, 16, 18, 20, 25, 30, 36, 40 mm<br/>* coolant system<br/>* operating key<br/>* operating instructions<br/><br/>machine workshop-tested and with electrical testing report included!<br/><br/><br/><br/><br/> VOLTAGE: 400 V V
INFEED OF WHEEL CARRIAGE: 100 MM
WORKING AREA: 2 - 40 MM
MAX. DIA. OF GRINDING WHEEL: 100 MM
AIR PRESSURE - REQUIRED: 6 BAR
DRIVE CAPACITY - SPINDLE MOTOR: 2,2 KW
COOLANT PUMP: 0,16 KW
WEIGHT: 0,35 T
OPTICAL CONDITION: VERY GOOD:
MECHANIC: VERY GOOD:
THE MACHINE CAN BE VIEWED UNDER CURRENT.:
0013 HS
400 V. 50 HZ, COLOR: GRAY-BLACK


ACCESSORIES:
* 1 COLLET EAC 173 E, 4, 6,8, 10, 12, 14, 16, 18, 20, 25, 30, 36, 40 MM
* COOLANT SYSTEM
* OPERATING KEY
* OPERATING INSTRUCTIONS

MACHINE WORKSHOP-TESTED AND WITH ELECTRICAL TESTING REPORT INCLUDED!




Vendedor: Ralf Schmeißer Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-cube control system,.
lol 2 male fast tightening,
ce certificate,
lol 1 universal frame.
lol 1 almost female tightening,
two stage front lay system.
elevated 410 mm,
centre line,
blanking station,
direct loading, pallets
automatic universal feeder with non-stop facility.
adjustable feed table with complement of infeed table furniture,
left and right hand side tab of lays,.
bottom mounted gripper system,.
double action stripping,
binder sheet insertion,
thin plate with micro metric adjustment

tools for loading and transporting
speed 7,500 s / h
-under complete refurbishment--.
 CUBE CONTROL SYSTEM,. LOL 2 MALE FAST TIGHTENING, CE CERTIFICATE, LOL 1 UNIVERSAL FRAME. LOL 1 ALMOST FEMALE TIGHTENING, TWO STAGE FRONT LAY SYSTEM. ELEVATED 410 MM, CENTRE LINE, BLANKING STATION, DIRECT LOADING, PALLETS AUTOMATIC UNIVERSAL FEEDER WITH NON-STOP FACILITY. ADJUSTABLE FEED TABLE WITH COMPLEMENT OF INFEED TABLE FURNITURE, LEFT AND RIGHT HAND SIDE TAB OF LAYS,. BOTTOM MOUNTED GRIPPER SYSTEM,. DOUBLE ACTION STRIPPING, BINDER SHEET INSERTION, THIN PLATE WITH MICRO METRIC ADJUSTMENT TOOLS FOR LOADING AND TRANSPORTING SPEED 7,500 S / H -UNDER COMPLETE REFURBISHMENT--.
Vendedor: Seemüller Grafische Maschinen GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 8024 mm<br/>y-travel: 4700 mm<br/>z-travel: 1202 mm<br/>control: heidenhain tnc 426 <br/>cross rail - adjustment: 2611 mm<br/>max. distance between table and spindle-nose: 3003 mm<br/>distance between columns: 4000 mm<br/>table load: 20 t<br/>table surface area: 8000 x 3500 mm<br/>spindle turning speed range: 20 - 1800 u/min<br/>tool taper: bt 50 <br/>main drive: 57/42 kw<br/>feed: 6 - 5000 mm/min<br/>rapid traverse: 10000 m/min<br/>total power requirement:  kw<br/>weight of the machine ca.: 140 t<br/>dimensions of the machine ca.:  m<br/>atc (tool changer): 80-fach pos<br/>machine still under power in the factory.<br/><br/>current owner has initiated over the last years the following refurbishments in <br/>2011 / 2012 / 2014 and 2015 (total value appr. euro 50,000.--) <br/>-all axis cover rubber wipers change new.<br/>-air cooler change new <br/>-x axis ball screw change new.<br/>-xyz axis drive n motor change new .<br/><br/>owner says the machine performs within 20 micron accuracy (please note this is <br/>a heavy duty machine with high torque / low rpm)<br/><br/>usage of machine predominantly machining of cast ? iron parts <br/><br/><br/><br/><br/> X-TRAVEL: 8024 MM
Y-TRAVEL: 4700 MM
Z-TRAVEL: 1202 MM
CONTROL: HEIDENHAIN TNC 426
CROSS RAIL - ADJUSTMENT: 2611 MM
MAX. DISTANCE BETWEEN TABLE AND SPINDLE-NOSE: 3003 MM
DISTANCE BETWEEN COLUMNS: 4000 MM
TABLE LOAD: 20 T
TABLE SURFACE AREA: 8000 X 3500 MM
SPINDLE TURNING SPEED RANGE: 20 - 1800 U/MIN
TOOL TAPER: BT 50
MAIN DRIVE: 57/42 KW
FEED: 6 - 5000 MM/MIN
RAPID TRAVERSE: 10000 M/MIN
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 140 T
DIMENSIONS OF THE MACHINE CA.: M
ATC (TOOL CHANGER): 80-FACH POS
MACHINE STILL UNDER POWER IN THE FACTORY.

CURRENT OWNER HAS INITIATED OVER THE LAST YEARS THE FOLLOWING REFURBISHMENTS IN
2011 / 2012 / 2014 AND 2015 (TOTAL VALUE APPR. EURO 50,000.--)
-ALL AXIS COVER RUBBER WIPERS CHANGE NEW.
-AIR COOLER CHANGE NEW
-X AXIS BALL SCREW CHANGE NEW.
-XYZ AXIS DRIVE N MOTOR CHANGE NEW .

OWNER SAYS THE MACHINE PERFORMS WITHIN 20 MICRON ACCURACY (PLEASE NOTE THIS IS
A HEAVY DUTY MACHINE WITH HIGH TORQUE / LOW RPM)

USAGE OF MACHINE PREDOMINANTLY MACHINING OF CAST ? IRON PARTS




Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-agnati go14 single facer and splicer, 1988
ref.nr: 2577 manufacturer agnati go14 model single facer and splicer year built: 1988 speed: 250 m / min max sheet size: 2500 mm availability: immediately condition: good price: on technical request spezification: â?¢ 1 single facer agnati go14 and 2 splicers m torres cts
â?¢ machine completely rebuilt by agnati in 2005 (enclosed photos). the scope of the works done cost what 250kâ?¬. the description is bellow

-new sp inclined belt conveyor for go14 (take up conveyor), - drive for bridge horizontal belts - replacement of several worn out parts as listed on 14/03/2005 quotation 624, dd.
-one new doctor roll + one new glue roll, one set of new b flute with all the parts - nitrurated corrolls
-chromed coating for corrolls
-one set of 4 bearings + 4 tension bushings + 8 mim for corrolls
-regrinding roll of existing pressure
-one set of 2 bearings + 2 tension bushings + 4 mim for pressure roll
-new pneumatic piping at the machine
-overhaul of the main gearbox
-new main d.c. motor 75 kw
-new control desk with 10 "tft screen, as per ce rules
-new electrical cabinet with air conditioner, as per ce rules
-new cabling at the machine, including push-button pushbutton panels, as per ce rules
-new machine protections, as per ce rules
-painting machine - color to be defined
-complete refurbishment of the basement - rectify the journal of the pre heater - new torpress rotochamber
-new steam shower for the fluting
-blowers 2 filter for the
-new pulley for main dc motor + toothed belt

AGNATI GO14 SINGLE FACER AND SPLICER, 1988 REF.NR: 2577 MANUFACTURER AGNATI GO14 MODEL SINGLE FACER AND SPLICER YEAR BUILT: 1988 SPEED: 250 M / MIN MAX SHEET SIZE: 2500 MM AVAILABILITY: IMMEDIATELY CONDITION: GOOD PRICE: ON TECHNICAL REQUEST SPEZIFICATION: &ACIRC;?&CENT; 1 SINGLE FACER AGNATI GO14 AND 2 SPLICERS M TORRES CTS &ACIRC;?&CENT; MACHINE COMPLETELY REBUILT BY AGNATI IN 2005 (ENCLOSED PHOTOS). THE SCOPE OF THE WORKS DONE COST WHAT 250K&ACIRC;?&NOT;. THE DESCRIPTION IS BELLOW -NEW SP INCLINED BELT CONVEYOR FOR GO14 (TAKE UP CONVEYOR), - DRIVE FOR BRIDGE HORIZONTAL BELTS - REPLACEMENT OF SEVERAL WORN OUT PARTS AS LISTED ON 14/03/2005 QUOTATION 624, DD. -ONE NEW DOCTOR ROLL + ONE NEW GLUE ROLL, ONE SET OF NEW B FLUTE WITH ALL THE PARTS - NITRURATED CORROLLS -CHROMED COATING FOR CORROLLS -ONE SET OF 4 BEARINGS + 4 TENSION BUSHINGS + 8 MIM FOR CORROLLS -REGRINDING ROLL OF EXISTING PRESSURE -ONE SET OF 2 BEARINGS + 2 TENSION BUSHINGS + 4 MIM FOR PRESSURE ROLL -NEW PNEUMATIC PIPING AT THE MACHINE -OVERHAUL OF THE MAIN GEARBOX -NEW MAIN D.C. MOTOR 75 KW -NEW CONTROL DESK WITH 10 "TFT SCREEN, AS PER CE RULES -NEW ELECTRICAL CABINET WITH AIR CONDITIONER, AS PER CE RULES -NEW CABLING AT THE MACHINE, INCLUDING PUSH-BUTTON PUSHBUTTON PANELS, AS PER CE RULES -NEW MACHINE PROTECTIONS, AS PER CE RULES -PAINTING MACHINE - COLOR TO BE DEFINED -COMPLETE REFURBISHMENT OF THE BASEMENT - RECTIFY THE JOURNAL OF THE PRE HEATER - NEW TORPRESS ROTOCHAMBER -NEW STEAM SHOWER FOR THE FLUTING -BLOWERS 2 FILTER FOR THE -NEW PULLEY FOR MAIN DC MOTOR + TOOTHED BELT
Vendedor: PP LION GMBH
Año de construcción: usado
Ubicación: Land-blow molder krones contiform c10 – 12 000 bph 
  
this blow molder was built by krones in 1999, it was refurbished by krones in 2016. the machine is currently installed, powered and can be tested, and it is available for immediate delivery. the delivery includes molds for 1.0 and 1.5 liter pet bottles. chiller and preform feeder are not included.  
  
manufacturer: 	krones ag
model: 	contiform 112 – 10 
year: 	1999 
number of molds: 	10 
capacity: 	12 000 bph 
bottle sizes: 	1.0 and 1.5 liter 
neck type: 	28 mm, pco 1810 long neck
operating hours: 	7 748 h after refurbishment 
control plc: 	siemens simatic s5
dimensions: 	3.07 x 3.4 x 2.54 m (lxwxh)
weight: 	12 000 kg 
electric power: 	162 kw 

 BLOW MOLDER KRONES CONTIFORM C10 – 12 000 BPH THIS BLOW MOLDER WAS BUILT BY KRONES IN 1999, IT WAS REFURBISHED BY KRONES IN 2016. THE MACHINE IS CURRENTLY INSTALLED, POWERED AND CAN BE TESTED, AND IT IS AVAILABLE FOR IMMEDIATE DELIVERY. THE DELIVERY INCLUDES MOLDS FOR 1.0 AND 1.5 LITER PET BOTTLES. CHILLER AND PREFORM FEEDER ARE NOT INCLUDED. MANUFACTURER: KRONES AG MODEL: CONTIFORM 112 – 10 YEAR: 1999 NUMBER OF MOLDS: 10 CAPACITY: 12 000 BPH BOTTLE SIZES: 1.0 AND 1.5 LITER NECK TYPE: 28 MM, PCO 1810 LONG NECK OPERATING HOURS: 7 748 H AFTER REFURBISHMENT CONTROL PLC: SIEMENS SIMATIC S5 DIMENSIONS: 3.07 X 3.4 X 2.54 M (LXWXH) WEIGHT: 12 000 KG ELECTRIC POWER: 162 KW
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 333 €
Ubicación: Land-igen4 110-xxl
refurbished in 2014
clicks after refurbishment: 5, 6 mio.
igen4 110-xxl
refurbished in 2014
clicks after refurbishment: 5, 6 mio.

performance

rated speed
range depending on paper size:
from 110 ipm for 7 IGEN4 110-XXL REFURBISHED IN 2014 CLICKS AFTER REFURBISHMENT: 5, 6 MIO. IGEN4 110-XXL REFURBISHED IN 2014 CLICKS AFTER REFURBISHMENT: 5, 6 MIO. PERFORMANCE RATED SPEED RANGE DEPENDING ON PAPER SIZE: FROM 110 IPM FOR 7 "X 7" TO 40 IPM FOR 14.33 X 22.5 " RESOLUTION 4800 × 600 × 1-BIT RECOMMENDED AVERAGE MONTHLY VOLUME 200.000-3,750,000 PAGES PER MONTH LINE SCREENS 150, 175, 200, OR 300 LPI, ALL UTILIZING 256 GRAY LEVELS CAPABILITIES PRINTED SIDES DUPLEX TECHNOLOGY NETWORK INTERFACES 10/100 BASET ETHERNET PROTOCOLS: TCP/IP, APPLETALK, NOVELL IPX/SPX, ETHERTALK ® NET BEUI, PHASE II, LPR/LPD PRINT ENGINE DIGITAL COLOR PRESS XEROGRAPHY PAPER HANDLING PAPER SOURCES UP TO 6 FEEDER MODULES, EACH WITH 2 TRAYS STANDARD PAPER CAPACITY 30.000 SHEETS MAXIMUM PAPER CAPACITY WITH OPTIONS 80.000 SHEETS AUTO DUPLEX AUTOMATIC DUPLEX WITH WIDE RADIUS INVERTER FOR SECOND SIDE IMAGING MEDIA DIMENSIONS-MINIMUM 7 X 7 INCHES MEDIA DIMENSIONS-MAXIMUM 14.33 X 22.5 INCHES MEDIA WEIGHT-MINIMUM 16 LBS MEDIA WEIGHT-MAXIMUM 130 LBS MEDIA TYPES COATED: GLOSS, MATTE, DULL, SILK UNCOATED, TEXTURED, SPECIALTY STOCKS RECYCLED, PERFORATED, TABS, TRANSPARENCIES, A WIDE VARIETY OF LABELS, SYNTHETICS DOCUCARD, NEVERTEAR, DURA PAPER ™ MIXED-STOCK JOBS SUPPORTED AT RATED SPEED NO DRYING TIME BEFORE COATING DOWNLOAD SPECIALTY MEDIA PROSPECTING GUIDE › INPUT TRAY 1 2.500 SHEETS TRAY 2 2.500 SHEETS OPTIONAL HIGH CAPACITY FEEDER LASERMAX ROLL SYSTEMS DOCUSHEETER ™ IG: 50.000 SHEETS OTHER INPUT DEVICES XEROX DOCUCARD SOLUTIONS TILTATRON/STACKATRON/ OUTPUT OUTPUT CAPACITY TWO CARTS PER STACKER; STACKER CART HOLDS 12 "80 LB. COATED TEXT (3.000 SHEETS)-UP TO FOUR STACKER TRUCKS AVAILABLE FINISHING FLATS GBC DELTA LAMINATOR GBC HI TAC LAMINATE FILM D&K SUPER STICK LAMINATE FILM EPIC CTI-635 INLINE COATING SYSTEM STITCHED SETS XEROX SQUAREFOLD BOOKLET MAKER CP BOURG BDFX BOOKLET MAKER DUPLO 5000 SYSTEM INLINE BOOKLET MAKER DUPLO SCC NEARLINE BOOKLET MAKER LAY FLATS GBC GBC DIGICOIL BINDER PUNCH FUSION II TAPE BOUND XEROX DB120-D DOCUMENT BINDER CASE BOUND ON DEMAND MACHINERY PERFECT BOUND XEROX MANUAL BOOK FACTORY CP BOURG BQ270 PERFECT BB3002 PERFECT BINDER STANDARD HORIZON BINDER BOOKLET MAKING XEROX SQUAREFOLD BOOKLET MAKER CP BOURG BDFX BOOKLET MAKER DUPLO 5000 SYSTEM INLINE BOOKLET MAKER DUPLO SCC NEARLINE BOOKLET MAKER OTHER FINISHING OPTIONS XEROX FINISHING INTERFACE KIT PRINT CONTROLLERS DIGITAL FRONT ENDS XEROX FREEFLOW PRINT SERVER FEATURES: MAXIMUM EFFICIENCY FOR SHORT-RUN, FAST-TURNAROUND COLOR JOBS HIGH PERFORMANCE AND PRODUCTIVITY FOR COMPLEX AND GRAPHIC INTENSE VI JOBS CONFIDENTCOLOR TECHNOLOGY INCLUDING: ICC DEVICELINK PROFILING AUTOMATIC IMAGE ENHANCEMENT OUTSTANDING COLOR AND IMAGE QUALITY CONTROLS SEAMLESS INTEROPERABILITY WITH FREEFLOW PRODUCT SUITE INTEGRATED PARALLEL RIP TECHNOLOGY PANTONE ™ LICENSED EASY-TO-USE, CUSTOMIZABLE GUI FOR JOB AND PRODUCTION MANAGEMENT COMPETITOR RECEIVE, RIP, AND PRINT 10/100/1000 BASET ETHERNET STANDARD NETWORK INTERFACES: PROTOCOLS: TCP/IP, NOVELL ® NDS ® IPX/SPX, APPLETALK ® IPP, IPP, DHCP, SNMP MIB II SUPPORT FOR THIRD-PARTY ADMINISTRATION TOOLS FILE SUPPORT: ADOBE ® POSTSCRIPT ® LEVEL 1, 2, 3 ADOBE ® ACROBAT ® 7.0, PDF 1.6, PDF/X TIFF, PCL5C, PCL6XL XEROX CX PRINT SERVER, POWERED BY CREO ™ FEATURES: HIGH PERFORMANCE RIP DESIGNED TO OPTIMIZE DIGITAL PRINTING AND VI APPLICATIONS WITH OUTSTANDING IMAGE QUALITY COMPREHENSIVE PRODUCTION TOOLS INCLUDING IMPOSITION, COLOR MANAGEMENT, IMAGE ENHANCEMENT, AND PREFLIGHT FLEXIBLE VARIABLE INFORMATION SUPPORT FOR VPS AND XEROX VIPP TRADITIONAL PRINT AND PRE-PRESS WORKFLOWS 10/100/1000 BASET ETHERNET STANDARD NETWORK INTERFACES: PROTOCOLS: TCP/IP, IPX/SPX, APPLETALK, NET BEUI FILE SUPPORT: POSTSCRIPT LEVEL 1, 2, 3 PDF/ACROBAT EPS, EPSF DCS, DCSF PRINT-READY RTP JOBS CREO VPS XEROX VIPP XEROX EX PRINT SERVER, POWERED BY FIERY ™ FEATURES: LEVERAGE RESOURCES MORE EFFICIENTLY ACHIEVE MAXIMUM PRODUCTIVITY AND POWER INCREASE PROFITS THROUGH FASTER SETUP AND PROCESSING OR HIGH MARGIN, COMPLEX JOBS ENSURE COLOR ACCURACY AND CONSISTENCY IMPROVE COMMUNICATION FOR ENHANCED CUSTOMER SATISFACTION INTEGRATE INTO MULTIPLE ENVIRONMENTS NETWORK STANDARD INTERFACES: TCP/IP, NOVELL ® IPX, APPLETALK, IPP ® (NDS) ETHERTALK ® PHASE II LPR/LPD 10/100/1000 BASET ETHERNET SMB PRINT SHARING (OVER TCP/IP) FILE SUPPORT: ADOBE ® POSTSCRIPT ® LEVEL 1, 2, 3 ADOBE PDF 1.5, 1.6 AND 1.7 (ACROBAT ® 6, 7 AND 8) PDF/X-1A AND 3 ENCAPSULATED POSTSCRIPT (EPS) DCS 2.0, CT/LW TAGGED IMAGE FILE FORMAT (TIFF AND TIFF/IT) JPEG JOBS THAT HAVE BEEN RIPED FOR IGEN4 (GRIDS) JOBS SUBMITTED FROM FREEFLOW MAKEREADY ® ® OR FREEFLOW PRINT MANAGER DISMANTLED BY XEROX, READY FOR INSPECTION/SHIPMENT
Vendedor: Gutenberg Grafishe Machines B.V.
Año de construcción: usado
Ubicación: Land-year 2009 – freshman # 217
complete with:

tape stacking cardboard cut equipment – control power – covers stickiness – count covers – trim excess cardboard cut recovery device – output stacker – manuals and accessories
  YEAR 2009 – FRESHMAN # 217 COMPLETE WITH: TAPE STACKING CARDBOARD CUT EQUIPMENT – CONTROL POWER – COVERS STICKINESS – COUNT COVERS – TRIM EXCESS CARDBOARD CUT RECOVERY DEVICE – OUTPUT STACKER – MANUALS AND ACCESSORIES
Vendedor: Alcon SRL
Año de construcción: usado
Ubicación: Land-technical data:

-blade length 500 mm
	-cutting area: approximately 320 mm
				square 280 mm
				rectangle 240 x 320 mm - strokes of the blade of 45-62 - 90-125 1/min - cutting speeds 12-17 - 24-34 1/min
	-maximum material replenishment length 500 mm - section piece counter
	-hydr. material clamping stock
	-separate control panel
	-drive 400 v / 3,4 kw
	-space requirement approx.	        b 2400 x h t 1000 x 1550 mm
	-weight approx.				   	950 kg
 TECHNICAL DATA: -BLADE LENGTH 500 MM -CUTTING AREA: APPROXIMATELY 320 MM SQUARE 280 MM RECTANGLE 240 X 320 MM - STROKES OF THE BLADE OF 45-62 - 90-125 1/MIN - CUTTING SPEEDS 12-17 - 24-34 1/MIN -MAXIMUM MATERIAL REPLENISHMENT LENGTH 500 MM - SECTION PIECE COUNTER -HYDR. MATERIAL CLAMPING STOCK -SEPARATE CONTROL PANEL -DRIVE 400 V / 3,4 KW -SPACE REQUIREMENT APPROX. B 2400 X H T 1000 X 1550 MM -WEIGHT APPROX. 950 KG
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: 27.500 €
Ubicación: Land-used z-blade mixer, capacity 450 liters. the mixer has a heating and cooling jacket. chamber and agitators in acid-proof construction. mixer after a major refurbishment. producer werner & pfleiderer. USED Z-BLADE MIXER, CAPACITY 450 LITERS. THE MIXER HAS A HEATING AND COOLING JACKET. CHAMBER AND AGITATORS IN ACID-PROOF CONSTRUCTION. MIXER AFTER A MAJOR REFURBISHMENT. PRODUCER WERNER & PFLEIDERER.
Vendedor: Industrio Service
Año de construcción: usado
Precio: 8.950 £
Ubicación: Land-id: 4285
manufacturer: boy
model: 22d
viewing: not yet refurbished
condition: refurbished with guarantee
year: 2000
clamp force (t): 22
control system: dipronic
lead time: 6 weeks from order
in production: no
location: wellingborough

we have in our workshop and awaiting refurbishment this boy 22d.  the machine is a compact 22 tonne clamp machine with a very easy to use controller with the dipronic system.  these machines have stood the test of time and remain very popular as they are simple to use, cheap to repair and reliable.

machines awaiting refurbishment can be reserved with a small deposit and the refurbishment is then prioritised and scheduled.

refurbished machines from stv machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. a production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. machines are ultra clean and cosmetically as good as we can get them. we guarantee our refurbs are delivered fault free and leak free.

*please note that the video is of a previously refurbished boy 22d but is near identical to this one* ID: 4285 MANUFACTURER: BOY MODEL: 22D VIEWING: NOT YET REFURBISHED CONDITION: REFURBISHED WITH GUARANTEE YEAR: 2000 CLAMP FORCE (T): 22 CONTROL SYSTEM: DIPRONIC LEAD TIME: 6 WEEKS FROM ORDER IN PRODUCTION: NO LOCATION: WELLINGBOROUGH WE HAVE IN OUR WORKSHOP AND AWAITING REFURBISHMENT THIS BOY 22D. THE MACHINE IS A COMPACT 22 TONNE CLAMP MACHINE WITH A VERY EASY TO USE CONTROLLER WITH THE DIPRONIC SYSTEM. THESE MACHINES HAVE STOOD THE TEST OF TIME AND REMAIN VERY POPULAR AS THEY ARE SIMPLE TO USE, CHEAP TO REPAIR AND RELIABLE. MACHINES AWAITING REFURBISHMENT CAN BE RESERVED WITH A SMALL DEPOSIT AND THE REFURBISHMENT IS THEN PRIORITISED AND SCHEDULED. REFURBISHED MACHINES FROM STV MACHINERY UNDERGO A COMPREHENSIVE TEST PROCEDURE DURING WHICH EVERY FUNCTION OF THE MACHINE IS TESTED AND IF NECESSARY REPAIRED. A PRODUCTION RUN OF AT LEAST 5000 FAULT FREE CYCLES PRIOR TO SIGN OFF ENSURES TROUBLE FREE OPERATION ONCE DELIVERED. MACHINES ARE ULTRA CLEAN AND COSMETICALLY AS GOOD AS WE CAN GET THEM. WE GUARANTEE OUR REFURBS ARE DELIVERED FAULT FREE AND LEAK FREE. *PLEASE NOTE THAT THE VIDEO IS OF A PREVIOUSLY REFURBISHED BOY 22D BUT IS NEAR IDENTICAL TO THIS ONE*
Vendedor: STVmachinery
Año de construcción: usado
Precio: 14.750 £
Ubicación: Land-id: 4452
manufacturer: boy
model: 80m
viewing: not yet refurbished
condition: refurbished with guarantee
clamp force (t): 80
control system: procan
lead time: 6 weeks from order
in production: no

boy 80 tonne clamp machine with procan controller.  it is in our workshop in wellingborough and awaiting the royal stv machinery refurbishment treatment.  we’re happy to show visitors refurbished examples of machinery and a tour of the workshop where we can go through the process in detail.

machines awaiting refurbishment can be reserved with a small deposit and the refurbishment is then prioritised and scheduled.

refurbished machines from stv machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. a production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. machines are ultra clean and cosmetically as good as we can get them. we guarantee our refurbs are delivered fault free and leak free.

*please note that the video is of a previously refurbished boy 80m but is near identical to this one* ID: 4452 MANUFACTURER: BOY MODEL: 80M VIEWING: NOT YET REFURBISHED CONDITION: REFURBISHED WITH GUARANTEE CLAMP FORCE (T): 80 CONTROL SYSTEM: PROCAN LEAD TIME: 6 WEEKS FROM ORDER IN PRODUCTION: NO BOY 80 TONNE CLAMP MACHINE WITH PROCAN CONTROLLER. IT IS IN OUR WORKSHOP IN WELLINGBOROUGH AND AWAITING THE ROYAL STV MACHINERY REFURBISHMENT TREATMENT. WE’RE HAPPY TO SHOW VISITORS REFURBISHED EXAMPLES OF MACHINERY AND A TOUR OF THE WORKSHOP WHERE WE CAN GO THROUGH THE PROCESS IN DETAIL. MACHINES AWAITING REFURBISHMENT CAN BE RESERVED WITH A SMALL DEPOSIT AND THE REFURBISHMENT IS THEN PRIORITISED AND SCHEDULED. REFURBISHED MACHINES FROM STV MACHINERY UNDERGO A COMPREHENSIVE TEST PROCEDURE DURING WHICH EVERY FUNCTION OF THE MACHINE IS TESTED AND IF NECESSARY REPAIRED. A PRODUCTION RUN OF AT LEAST 5000 FAULT FREE CYCLES PRIOR TO SIGN OFF ENSURES TROUBLE FREE OPERATION ONCE DELIVERED. MACHINES ARE ULTRA CLEAN AND COSMETICALLY AS GOOD AS WE CAN GET THEM. WE GUARANTEE OUR REFURBS ARE DELIVERED FAULT FREE AND LEAK FREE. *PLEASE NOTE THAT THE VIDEO IS OF A PREVIOUSLY REFURBISHED BOY 80M BUT IS NEAR IDENTICAL TO THIS ONE*
Vendedor: STVmachinery
Año de construcción: usado
Precio: 14.750 £
Ubicación: Land-id: 4453
manufacturer: boy
model: 80m
viewing: available to inspect by appointment
condition: refurbished with guarantee
clamp force (t): 80
control system: procan
lead time: 6 weeks from order
in production: no
location: wellingborough

we do like boy’s here at stv machinery and adding to our collection that are currently awaiting refurbishment is this 80 tonne clamp machine with procan controller.  although it is not yet ready to go, we welcome inspections where we can go through the refurbishment process in detail – it’s more than a quick wipe over with the nearest rag.

machines awaiting refurbishment can be reserved with a small deposit and the refurbishment is then prioritised and scheduled.

refurbished machines from stv machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. a production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. machines are ultra clean and cosmetically as good as we can get them. we guarantee our refurbs are delivered fault free and leak free.

*please note that the video is of a previously refurbished boy 80m but is near identical to this one* ID: 4453 MANUFACTURER: BOY MODEL: 80M VIEWING: AVAILABLE TO INSPECT BY APPOINTMENT CONDITION: REFURBISHED WITH GUARANTEE CLAMP FORCE (T): 80 CONTROL SYSTEM: PROCAN LEAD TIME: 6 WEEKS FROM ORDER IN PRODUCTION: NO LOCATION: WELLINGBOROUGH WE DO LIKE BOY’S HERE AT STV MACHINERY AND ADDING TO OUR COLLECTION THAT ARE CURRENTLY AWAITING REFURBISHMENT IS THIS 80 TONNE CLAMP MACHINE WITH PROCAN CONTROLLER. ALTHOUGH IT IS NOT YET READY TO GO, WE WELCOME INSPECTIONS WHERE WE CAN GO THROUGH THE REFURBISHMENT PROCESS IN DETAIL – IT’S MORE THAN A QUICK WIPE OVER WITH THE NEAREST RAG. MACHINES AWAITING REFURBISHMENT CAN BE RESERVED WITH A SMALL DEPOSIT AND THE REFURBISHMENT IS THEN PRIORITISED AND SCHEDULED. REFURBISHED MACHINES FROM STV MACHINERY UNDERGO A COMPREHENSIVE TEST PROCEDURE DURING WHICH EVERY FUNCTION OF THE MACHINE IS TESTED AND IF NECESSARY REPAIRED. A PRODUCTION RUN OF AT LEAST 5000 FAULT FREE CYCLES PRIOR TO SIGN OFF ENSURES TROUBLE FREE OPERATION ONCE DELIVERED. MACHINES ARE ULTRA CLEAN AND COSMETICALLY AS GOOD AS WE CAN GET THEM. WE GUARANTEE OUR REFURBS ARE DELIVERED FAULT FREE AND LEAK FREE. *PLEASE NOTE THAT THE VIDEO IS OF A PREVIOUSLY REFURBISHED BOY 80M BUT IS NEAR IDENTICAL TO THIS ONE*
Vendedor: STVmachinery
Año de construcción: usado
Precio: 14.950 £
Ubicación: Land-id: 4940
manufacturer: boy
model: 35
viewing: available to inspect by appointment
condition: refurbished with guarantee
year: 2006
clamp force (t): 35
screw diameter (mm): 28
max shot weight (ps) (g): 44
control system: procan
lead time: 4 weeks from order
in production: yes
location: wellingborough, northamptonshire

compact boy machine with 35t clamp and a four tie-bar design, currently awaiting refurbishment at our workshop in wellingborough.

the machine was originally manufactured in 2006 and is fitted with the procan controller, a version of which is still supplied today.  boy uk support the procan system well as it was a top seller for them and was supplied for many years in this version until an evolved controller was released.

boy are known for producing some of the most compact machines in the market and this machines offers great versatility for a range of applications.  the machine can be fully inspected by appointment.

machines awaiting refurbishment can be reserved with a small deposit and the refurbishment is the prioritised and scheduled. refurbished machines from stv machinery undergo a comprehensive test procedure during which every function of the machine is tested an if necessary repaired. a production run of at least 5000 fault free cycles priot to sign off ensures trouble free operation once delivered. machines are ultra clean and cosmetically as good as we can get them. we guarantee our refurbs are delivered fault free and leak free. ID: 4940 MANUFACTURER: BOY MODEL: 35 VIEWING: AVAILABLE TO INSPECT BY APPOINTMENT CONDITION: REFURBISHED WITH GUARANTEE YEAR: 2006 CLAMP FORCE (T): 35 SCREW DIAMETER (MM): 28 MAX SHOT WEIGHT (PS) (G): 44 CONTROL SYSTEM: PROCAN LEAD TIME: 4 WEEKS FROM ORDER IN PRODUCTION: YES LOCATION: WELLINGBOROUGH, NORTHAMPTONSHIRE COMPACT BOY MACHINE WITH 35T CLAMP AND A FOUR TIE-BAR DESIGN, CURRENTLY AWAITING REFURBISHMENT AT OUR WORKSHOP IN WELLINGBOROUGH. THE MACHINE WAS ORIGINALLY MANUFACTURED IN 2006 AND IS FITTED WITH THE PROCAN CONTROLLER, A VERSION OF WHICH IS STILL SUPPLIED TODAY. BOY UK SUPPORT THE PROCAN SYSTEM WELL AS IT WAS A TOP SELLER FOR THEM AND WAS SUPPLIED FOR MANY YEARS IN THIS VERSION UNTIL AN EVOLVED CONTROLLER WAS RELEASED. BOY ARE KNOWN FOR PRODUCING SOME OF THE MOST COMPACT MACHINES IN THE MARKET AND THIS MACHINES OFFERS GREAT VERSATILITY FOR A RANGE OF APPLICATIONS. THE MACHINE CAN BE FULLY INSPECTED BY APPOINTMENT. MACHINES AWAITING REFURBISHMENT CAN BE RESERVED WITH A SMALL DEPOSIT AND THE REFURBISHMENT IS THE PRIORITISED AND SCHEDULED. REFURBISHED MACHINES FROM STV MACHINERY UNDERGO A COMPREHENSIVE TEST PROCEDURE DURING WHICH EVERY FUNCTION OF THE MACHINE IS TESTED AN IF NECESSARY REPAIRED. A PRODUCTION RUN OF AT LEAST 5000 FAULT FREE CYCLES PRIOT TO SIGN OFF ENSURES TROUBLE FREE OPERATION ONCE DELIVERED. MACHINES ARE ULTRA CLEAN AND COSMETICALLY AS GOOD AS WE CAN GET THEM. WE GUARANTEE OUR REFURBS ARE DELIVERED FAULT FREE AND LEAK FREE.
Vendedor: STVmachinery
Año de construcción: usado
Ubicación: Land-stock number: 3260
lapping machine
manufacturer: wentzky, type: br 40 gr
machine no.: 19/399, year of construction: 0

specifications: size table slide.              			400 mm
lappe stations with handweight 4 piece

length: 900 mm, height: 500 mm, width: 500 mm, weight: 200 kg

STOCK NUMBER: 3260 LAPPING MACHINE MANUFACTURER: WENTZKY, TYPE: BR 40 GR MACHINE NO.: 19/399, YEAR OF CONSTRUCTION: 0 SPECIFICATIONS: SIZE TABLE SLIDE. 400 MM LAPPE STATIONS WITH HANDWEIGHT 4 PIECE LENGTH: 900 MM, HEIGHT: 500 MM, WIDTH: 500 MM, WEIGHT: 200 KG
Vendedor: DenTool LTD
Año de construcción: usado
Precio: 295.000 USD
Ubicación: Land-psm-40 

1.06mwe ge jenbacher jms320gs-n.lc [x1] unused container packaged natural gas fueled power plant installed-not commissioned 2008y 400v 50hz exw russia.
 
2.1mwe ge jenbacher jms320gs-n.lc [x2] unused natural gas fueled gensets installed-not commissioned 2008y 10500v 50hz exw russia.
 
we have been looking for a company partner (co-partner), which would have interest in acquisition and relocation of the above-mentioned unused generator sets for decentralized power generation being sold as the asset recovery deal in russia.

we aimed to establish long terms relationships with co-partners with funding available and  experienced at least in 3 similar power plant installation projects fulfilled or specialized and focused in any of below areas in the supposed country of the asset’s final destination:
- epc power generation solution with reciprocating engines based power plants.
- refurbishment, recondition/overhauling of gej gensets.
- maintenance-operation-troubleshooting of gej gensets.
- relocation, installation, commissioning of gej gensets.

rusoffers traders team (rott)  is supposed to participate in alliance with such kind co-partner or on behalf of co-partner in submitting of formal purchase offer to acquire the mentioned asset from the title owner of the asset.

rott is collecting non-obligatory bids, non-binding letters of intent for a purchase formally issued with pof attached by prospective co-partners for contracting of the ge jenbacher power plant or gensets with ancillaries. partial deals may be considered for each of the asset above mentioned.  PSM-40 1.06MWE GE JENBACHER JMS320GS-N.LC [X1] UNUSED CONTAINER PACKAGED NATURAL GAS FUELED POWER PLANT INSTALLED-NOT COMMISSIONED 2008Y 400V 50HZ EXW RUSSIA. 2.1MWE GE JENBACHER JMS320GS-N.LC [X2] UNUSED NATURAL GAS FUELED GENSETS INSTALLED-NOT COMMISSIONED 2008Y 10500V 50HZ EXW RUSSIA. WE HAVE BEEN LOOKING FOR A COMPANY PARTNER (CO-PARTNER), WHICH WOULD HAVE INTEREST IN ACQUISITION AND RELOCATION OF THE ABOVE-MENTIONED UNUSED GENERATOR SETS FOR DECENTRALIZED POWER GENERATION BEING SOLD AS THE ASSET RECOVERY DEAL IN RUSSIA. WE AIMED TO ESTABLISH LONG TERMS RELATIONSHIPS WITH CO-PARTNERS WITH FUNDING AVAILABLE AND EXPERIENCED AT LEAST IN 3 SIMILAR POWER PLANT INSTALLATION PROJECTS FULFILLED OR SPECIALIZED AND FOCUSED IN ANY OF BELOW AREAS IN THE SUPPOSED COUNTRY OF THE ASSET’S FINAL DESTINATION: - EPC POWER GENERATION SOLUTION WITH RECIPROCATING ENGINES BASED POWER PLANTS. - REFURBISHMENT, RECONDITION/OVERHAULING OF GEJ GENSETS. - MAINTENANCE-OPERATION-TROUBLESHOOTING OF GEJ GENSETS. - RELOCATION, INSTALLATION, COMMISSIONING OF GEJ GENSETS. RUSOFFERS TRADERS TEAM (ROTT) IS SUPPOSED TO PARTICIPATE IN ALLIANCE WITH SUCH KIND CO-PARTNER OR ON BEHALF OF CO-PARTNER IN SUBMITTING OF FORMAL PURCHASE OFFER TO ACQUIRE THE MENTIONED ASSET FROM THE TITLE OWNER OF THE ASSET. ROTT IS COLLECTING NON-OBLIGATORY BIDS, NON-BINDING LETTERS OF INTENT FOR A PURCHASE FORMALLY ISSUED WITH POF ATTACHED BY PROSPECTIVE CO-PARTNERS FOR CONTRACTING OF THE GE JENBACHER POWER PLANT OR GENSETS WITH ANCILLARIES. PARTIAL DEALS MAY BE CONSIDERED FOR EACH OF THE ASSET ABOVE MENTIONED.
Vendedor: RUSOFFERS Co.
Año de construcción: usado
Precio: 3.490.000 USD
Ubicación: Land-psm-41

4.8 mwe capstone microturbine c200 [x24] used module packaged c600 c800 c1000 apg gas fueled power plants 2008y installed dismantling required offered refurbished 400v480v 50hz60hz exw russia.

we aimed to establish long terms relationships with co-partners with funding available and  experienced at least in 3 capstone microturbines based power plants installation projects fulfilled or specialized and focused in any of below areas in the supposed country of the asset’s final destination:
- epc power generation solution with capstone microturbines based power plants.
- refurbishment, recondition/overhauling of capstone microturbines.
- maintenance-operation-troubleshooting of capstone microturbines.
- relocation, installation, commissioning of capstone microturbines.

rusoffers traders team (rott) is supposed to participate in alliance with such kind co-partner or on behalf of co-partner in submitting of formal purchase offer to acquire the mentioned asset from the title owner of the asset.

rott is collecting non-obligatory bids, non-binding letters of intent for a purchase formally issued with pof attached by prospective co-partners for contracting of the capstone microturbine complete 7 packaged power plants (c600-5sets c800-1set c1000-1set) with ancillaries. partial purchase deals are allowed and considered upon the inquiry.   PSM-41 4.8 MWE CAPSTONE MICROTURBINE C200 [X24] USED MODULE PACKAGED C600 C800 C1000 APG GAS FUELED POWER PLANTS 2008Y INSTALLED DISMANTLING REQUIRED OFFERED REFURBISHED 400V480V 50HZ60HZ EXW RUSSIA. WE AIMED TO ESTABLISH LONG TERMS RELATIONSHIPS WITH CO-PARTNERS WITH FUNDING AVAILABLE AND EXPERIENCED AT LEAST IN 3 CAPSTONE MICROTURBINES BASED POWER PLANTS INSTALLATION PROJECTS FULFILLED OR SPECIALIZED AND FOCUSED IN ANY OF BELOW AREAS IN THE SUPPOSED COUNTRY OF THE ASSET’S FINAL DESTINATION: - EPC POWER GENERATION SOLUTION WITH CAPSTONE MICROTURBINES BASED POWER PLANTS. - REFURBISHMENT, RECONDITION/OVERHAULING OF CAPSTONE MICROTURBINES. - MAINTENANCE-OPERATION-TROUBLESHOOTING OF CAPSTONE MICROTURBINES. - RELOCATION, INSTALLATION, COMMISSIONING OF CAPSTONE MICROTURBINES. RUSOFFERS TRADERS TEAM (ROTT) IS SUPPOSED TO PARTICIPATE IN ALLIANCE WITH SUCH KIND CO-PARTNER OR ON BEHALF OF CO-PARTNER IN SUBMITTING OF FORMAL PURCHASE OFFER TO ACQUIRE THE MENTIONED ASSET FROM THE TITLE OWNER OF THE ASSET. ROTT IS COLLECTING NON-OBLIGATORY BIDS, NON-BINDING LETTERS OF INTENT FOR A PURCHASE FORMALLY ISSUED WITH POF ATTACHED BY PROSPECTIVE CO-PARTNERS FOR CONTRACTING OF THE CAPSTONE MICROTURBINE COMPLETE 7 PACKAGED POWER PLANTS (C600-5SETS C800-1SET C1000-1SET) WITH ANCILLARIES. PARTIAL PURCHASE DEALS ARE ALLOWED AND CONSIDERED UPON THE INQUIRY.
Vendedor: RUSOFFERS Co.
Año de construcción: usado
Ubicación: Land-bottle washer klinger nds 1l with label extractor 4500 bph 
    
this bottle washer was made by austrian klinger in 1989 and it has been refurbished by kahl+schlichterle in 2012. it has a label extractor and the machine is currently operational. the structure material is stainless steel and infeed and outfeed conveyors are included. 
  
the refurbishment in 2012 included checking and refurbishing the bottle inlet and outlet system, all pumps, the heating system, label removing system, the complete spraying system and complete changement of bottle cells. 
 
make:	klinger flaschenwaschsysteme gmbh, austria 
type: 	nds 1l
year: 	1989 / 2012 
capacity: 	4.000 to 4.500 bph
bottles per row:	10 
water consumption: 	2.5 m3/h
operating hours: 	approx 40.000
max bottle size: 	diameter 100 mm, height 330 mm 
voltage / hz:	15 kw, 480 v, 60 hz
plc:	siemens s7/200
dimensions: 	7.0 x 1.84 x 3.3 m (lxwxh)
weight: 	15 tons (operational)  BOTTLE WASHER KLINGER NDS 1L WITH LABEL EXTRACTOR 4500 BPH THIS BOTTLE WASHER WAS MADE BY AUSTRIAN KLINGER IN 1989 AND IT HAS BEEN REFURBISHED BY KAHL+SCHLICHTERLE IN 2012. IT HAS A LABEL EXTRACTOR AND THE MACHINE IS CURRENTLY OPERATIONAL. THE STRUCTURE MATERIAL IS STAINLESS STEEL AND INFEED AND OUTFEED CONVEYORS ARE INCLUDED. THE REFURBISHMENT IN 2012 INCLUDED CHECKING AND REFURBISHING THE BOTTLE INLET AND OUTLET SYSTEM, ALL PUMPS, THE HEATING SYSTEM, LABEL REMOVING SYSTEM, THE COMPLETE SPRAYING SYSTEM AND COMPLETE CHANGEMENT OF BOTTLE CELLS. MAKE: KLINGER FLASCHENWASCHSYSTEME GMBH, AUSTRIA TYPE: NDS 1L YEAR: 1989 / 2012 CAPACITY: 4.000 TO 4.500 BPH BOTTLES PER ROW: 10 WATER CONSUMPTION: 2.5 M3/H OPERATING HOURS: APPROX 40.000 MAX BOTTLE SIZE: DIAMETER 100 MM, HEIGHT 330 MM VOLTAGE / HZ: 15 KW, 480 V, 60 HZ PLC: SIEMENS S7/200 DIMENSIONS: 7.0 X 1.84 X 3.3 M (LXWXH) WEIGHT: 15 TONS (OPERATIONAL)
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-crate unloading and loading system with abb industrial robots

automatic robot packaging system made by sasib in 1998. the system is used for loading bottles in crates with the maximum capacity of 80.000 bph. it includes six floor-mounted robots and a control unit. the robots are made by abb in 1998 and they are refurbished in 2010/2011. production was stopped about one year after this refurbishment and therefore abb robots are in good working order. abb irb 6400 robots have a 6-axis movement, a reach of 2.4 meters and maximum handling capacity of 200 kg. system includes complete conveyor systems and gripping tools for the robots.

system manufacturer: sasib s.p.a., italy
system model: robokombi deca 5-5t
serial number: ibh 005 1226
crate loading capacity: 80 000 bph
crate unloading capacity: 20 000 bph

robot manufacturer: abb robotics products ab, sweden
robot type: irb6400 m97a
version: irb6400/2.4-200
year of manufacture: 1998
number of robots 6 pcs
payload capacity up to 200 kg
serial number: 64-06736
voltage: 3 x 400 v, 50 – 60 hz
electric power: 7.2 kva
maximum reach: 2.4 m
manipulator weight: 2.050 kg
controller weight: 250 kg
axes: 6
axis velocities: 90 – 190 °/s, depending on axis
axis velocity resolution: approx. 0.01 °/s each axis  CRATE UNLOADING AND LOADING SYSTEM WITH ABB INDUSTRIAL ROBOTS AUTOMATIC ROBOT PACKAGING SYSTEM MADE BY SASIB IN 1998. THE SYSTEM IS USED FOR LOADING BOTTLES IN CRATES WITH THE MAXIMUM CAPACITY OF 80.000 BPH. IT INCLUDES SIX FLOOR-MOUNTED ROBOTS AND A CONTROL UNIT. THE ROBOTS ARE MADE BY ABB IN 1998 AND THEY ARE REFURBISHED IN 2010/2011. PRODUCTION WAS STOPPED ABOUT ONE YEAR AFTER THIS REFURBISHMENT AND THEREFORE ABB ROBOTS ARE IN GOOD WORKING ORDER. ABB IRB 6400 ROBOTS HAVE A 6-AXIS MOVEMENT, A REACH OF 2.4 METERS AND MAXIMUM HANDLING CAPACITY OF 200 KG. SYSTEM INCLUDES COMPLETE CONVEYOR SYSTEMS AND GRIPPING TOOLS FOR THE ROBOTS. SYSTEM MANUFACTURER: SASIB S.P.A., ITALY SYSTEM MODEL: ROBOKOMBI DECA 5-5T SERIAL NUMBER: IBH 005 1226 CRATE LOADING CAPACITY: 80 000 BPH CRATE UNLOADING CAPACITY: 20 000 BPH ROBOT MANUFACTURER: ABB ROBOTICS PRODUCTS AB, SWEDEN ROBOT TYPE: IRB6400 M97A VERSION: IRB6400/2.4-200 YEAR OF MANUFACTURE: 1998 NUMBER OF ROBOTS 6 PCS PAYLOAD CAPACITY UP TO 200 KG SERIAL NUMBER: 64-06736 VOLTAGE: 3 X 400 V, 50 – 60 HZ ELECTRIC POWER: 7.2 KVA MAXIMUM REACH: 2.4 M MANIPULATOR WEIGHT: 2.050 KG CONTROLLER WEIGHT: 250 KG AXES: 6 AXIS VELOCITIES: 90 – 190 °/S, DEPENDING ON AXIS AXIS VELOCITY RESOLUTION: APPROX. 0.01 °/S EACH AXIS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-hegner multicut 1
scroll saw

the entry-level model for demanding handymen. simple and powerful, especially for fine work.

establishment of grey cast iron
    motor for continuous operation
    table top fine milled
    with dust extraction connection
    tischeinlegeteil
    control tool
    incl. 60 blade assortment!
    longitudinal passage 365 mm
    clearance height 50 mm
    saw table 435 x 230 mm
    45â° swiveling
    saw stroke: 2 strokes, 15 and 12 mm
    motor 230 v, 100 w
    weight approx. 16 kg
    article number heg 01100000
 HEGNER MULTICUT 1 SCROLL SAW THE ENTRY-LEVEL MODEL FOR DEMANDING HANDYMEN. SIMPLE AND POWERFUL, ESPECIALLY FOR FINE WORK. ESTABLISHMENT OF GREY CAST IRON MOTOR FOR CONTINUOUS OPERATION TABLE TOP FINE MILLED WITH DUST EXTRACTION CONNECTION TISCHEINLEGETEIL CONTROL TOOL INCL. 60 BLADE ASSORTMENT! LONGITUDINAL PASSAGE 365 MM CLEARANCE HEIGHT 50 MM SAW TABLE 435 X 230 MM 45&ACIRC;&DEG; SWIVELING SAW STROKE: 2 STROKES, 15 AND 12 MM MOTOR 230 V, 100 W WEIGHT APPROX. 16 KG ARTICLE NUMBER HEG 01100000
Vendedor: WEIBERT maschinen
Año de construcción: usado
Ubicación: Land-refurbished: 2018
plc: siemens s7
saw blade 550 mm
engine power 11 kw
saw blade feed 0-3000 mm / min
cutting speed (sb 500 mm): 4500 m / min
(sb 550 mm): 5100 m / min
square maximum work area: 170 x 170 mm
flat maximum work area: 380 x 75 mm
round maximum work area: 165 mm
supply length 10-1000 mm
nachschubgeschw. max 350 mm / s
(saw) approximate weight: 2500 kg
(magazine) about: 1000 kg
dimensions lxwxh (saw) about: 2800mm x 1600mm x 2200mm
(magazine) about: 3300 x 2200mm x 1800mm
footprint lxw 6100 mm x 2200 mm

the machine was overhauled 2014 in our house. among others were renewed following points:

-new plc control
-new elgo positioning system
-new electric components
-new pneumatic lines
-ueberholte pneumatic components
-new valve terminal
-revision of the extraction
-overhaul menzel minimal lubrication system
-replacing common wear parts
-overhaul of the soundproofing cabin

the machine is equipped with:
-a flat magazine for 3 m rods (optional 6 m)
-reinforced motor 11 kw
-reinforced material replenishment unit hydraulic
-sound insulation cabin
-gap extension (for a high-quality cutting surface without return tracks)

the machine is efficiently usable by their equipment and construction methods for a wide range of applications. the magazine and the elgo positioning system ensures easy and very profitable operation of the plant. on the basis of the high-performance motor as well as the reinforced material feeding unit, short cycle times can be even when the saw different profiles or vollmaterialen be achieved. the soundproof cabin this reduces the noise emissions to a minimum.

the saw unit is in like new condition and is ready for use immediately. she can be visited at any time under power with us in the house.

optional:
-flat magazine extension 6 m
-delivery and installation in your home
-training your staff
         REFURBISHED: 2018 PLC: SIEMENS S7 SAW BLADE 550 MM ENGINE POWER 11 KW SAW BLADE FEED 0-3000 MM / MIN CUTTING SPEED (SB 500 MM): 4500 M / MIN (SB 550 MM): 5100 M / MIN SQUARE MAXIMUM WORK AREA: 170 X 170 MM FLAT MAXIMUM WORK AREA: 380 X 75 MM ROUND MAXIMUM WORK AREA: 165 MM SUPPLY LENGTH 10-1000 MM NACHSCHUBGESCHW. MAX 350 MM / S (SAW) APPROXIMATE WEIGHT: 2500 KG (MAGAZINE) ABOUT: 1000 KG DIMENSIONS LXWXH (SAW) ABOUT: 2800MM X 1600MM X 2200MM (MAGAZINE) ABOUT: 3300 X 2200MM X 1800MM FOOTPRINT LXW 6100 MM X 2200 MM THE MACHINE WAS OVERHAULED 2014 IN OUR HOUSE. AMONG OTHERS WERE RENEWED FOLLOWING POINTS: -NEW PLC CONTROL -NEW ELGO POSITIONING SYSTEM -NEW ELECTRIC COMPONENTS -NEW PNEUMATIC LINES -UEBERHOLTE PNEUMATIC COMPONENTS -NEW VALVE TERMINAL -REVISION OF THE EXTRACTION -OVERHAUL MENZEL MINIMAL LUBRICATION SYSTEM -REPLACING COMMON WEAR PARTS -OVERHAUL OF THE SOUNDPROOFING CABIN THE MACHINE IS EQUIPPED WITH: -A FLAT MAGAZINE FOR 3 M RODS (OPTIONAL 6 M) -REINFORCED MOTOR 11 KW -REINFORCED MATERIAL REPLENISHMENT UNIT HYDRAULIC -SOUND INSULATION CABIN -GAP EXTENSION (FOR A HIGH-QUALITY CUTTING SURFACE WITHOUT RETURN TRACKS) THE MACHINE IS EFFICIENTLY USABLE BY THEIR EQUIPMENT AND CONSTRUCTION METHODS FOR A WIDE RANGE OF APPLICATIONS. THE MAGAZINE AND THE ELGO POSITIONING SYSTEM ENSURES EASY AND VERY PROFITABLE OPERATION OF THE PLANT. ON THE BASIS OF THE HIGH-PERFORMANCE MOTOR AS WELL AS THE REINFORCED MATERIAL FEEDING UNIT, SHORT CYCLE TIMES CAN BE EVEN WHEN THE SAW DIFFERENT PROFILES OR VOLLMATERIALEN BE ACHIEVED. THE SOUNDPROOF CABIN THIS REDUCES THE NOISE EMISSIONS TO A MINIMUM. THE SAW UNIT IS IN LIKE NEW CONDITION AND IS READY FOR USE IMMEDIATELY. SHE CAN BE VISITED AT ANY TIME UNDER POWER WITH US IN THE HOUSE. OPTIONAL: -FLAT MAGAZINE EXTENSION 6 M -DELIVERY AND INSTALLATION IN YOUR HOME -TRAINING YOUR STAFF
Vendedor: Lupberger Systemlösungen OHG
Año de construcción: usado
Ubicación: Land-overhaul year 2018
year of manufacture 2010
saw blades carbide 500 mm
saw motor power 7,5 kw
speed saw motor 2000-38000 min-1
cutting speed blade 3100-6000 mm / min
saw blade feed adjustable 0-40 mm / s
working range 90 â° max: 460 x 50 mm
supply length
pneumatic:
single stroke: max 300 mm
servo controlled:
single stroke: max 300 mm
multiple hub: maximum 9999 mm

nachschubgeschw. servo-controlled replenishment unit 300 mm / s
compressed air connection of be 6 bar
gewicht(saege)ca.: 1000 kg
dimensions lxbxh(saege)ca.: 2100mm x2000mm x1600mm
hydraulikagregat) approx.: 900 mm x600mm x800mm

technical description pressta eisele profilma 540 retrofit

pressta eisele profilma 540 retrofit
fully automatic high-speed sawing machine for non-ferrous metals and plastics

the machine is both technically and optically after completed retrofit in mint condition.
the machine is efficiently usable by their equipment and construction methods for a wide range of applications. especially the saw distinguished by your multiple voltage in combination with the hydraulic stamping unit, full editing easier parts in large quantities. the programmed hmi control ensure a simple and very profitable operation of the system. the soundproof cabin this reduces the noise emissions to a minimum.

the machine will be overhauled on request in our house. among others are
following renewed:
-replacement of the plc control siemens s7
-replacement of the siemens hmi user interface
-replacement of the ball spindle (with option pack servo)
-replacement of servo motor and servo inverter (with option pack servo)
-replacement of pneumatic feed cylinder (if not option package servo)
-new electric components
-new pneumatic lines
-new pneumatic components
-overhaul or replacement of pneumatic cylinder
-renewal of the valve terminal
-tuning extraction performance
-minimum lubrication system overhaul
-general wear and tear parts
-overhaul of cabin
the machine is equipped with:
-sound insulation cabin
-mass tightening possible
-hydraulic cutting preparation

warranty:
we take for our systems, unless otherwise agreed, a 6 month warranty on all refurbished by us or exchanged parts. working time, as well as wearing parts are excluded from the warranty.

optional:
-flat magazine for automatic feeding of up to 6 m long materials
-roller conveyors for stock
-delivery and installation in your home
-training your staff     OVERHAUL YEAR 2018 YEAR OF MANUFACTURE 2010 SAW BLADES CARBIDE 500 MM SAW MOTOR POWER 7,5 KW SPEED SAW MOTOR 2000-38000 MIN-1 CUTTING SPEED BLADE 3100-6000 MM / MIN SAW BLADE FEED ADJUSTABLE 0-40 MM / S WORKING RANGE 90 &ACIRC;&DEG; MAX: 460 X 50 MM SUPPLY LENGTH PNEUMATIC: SINGLE STROKE: MAX 300 MM SERVO CONTROLLED: SINGLE STROKE: MAX 300 MM MULTIPLE HUB: MAXIMUM 9999 MM NACHSCHUBGESCHW. SERVO-CONTROLLED REPLENISHMENT UNIT 300 MM / S COMPRESSED AIR CONNECTION OF BE 6 BAR GEWICHT(SAEGE)CA.: 1000 KG DIMENSIONS LXBXH(SAEGE)CA.: 2100MM X2000MM X1600MM HYDRAULIKAGREGAT) APPROX.: 900 MM X600MM X800MM TECHNICAL DESCRIPTION PRESSTA EISELE PROFILMA 540 RETROFIT PRESSTA EISELE PROFILMA 540 RETROFIT FULLY AUTOMATIC HIGH-SPEED SAWING MACHINE FOR NON-FERROUS METALS AND PLASTICS THE MACHINE IS BOTH TECHNICALLY AND OPTICALLY AFTER COMPLETED RETROFIT IN MINT CONDITION. THE MACHINE IS EFFICIENTLY USABLE BY THEIR EQUIPMENT AND CONSTRUCTION METHODS FOR A WIDE RANGE OF APPLICATIONS. ESPECIALLY THE SAW DISTINGUISHED BY YOUR MULTIPLE VOLTAGE IN COMBINATION WITH THE HYDRAULIC STAMPING UNIT, FULL EDITING EASIER PARTS IN LARGE QUANTITIES. THE PROGRAMMED HMI CONTROL ENSURE A SIMPLE AND VERY PROFITABLE OPERATION OF THE SYSTEM. THE SOUNDPROOF CABIN THIS REDUCES THE NOISE EMISSIONS TO A MINIMUM. THE MACHINE WILL BE OVERHAULED ON REQUEST IN OUR HOUSE. AMONG OTHERS ARE FOLLOWING RENEWED: -REPLACEMENT OF THE PLC CONTROL SIEMENS S7 -REPLACEMENT OF THE SIEMENS HMI USER INTERFACE -REPLACEMENT OF THE BALL SPINDLE (WITH OPTION PACK SERVO) -REPLACEMENT OF SERVO MOTOR AND SERVO INVERTER (WITH OPTION PACK SERVO) -REPLACEMENT OF PNEUMATIC FEED CYLINDER (IF NOT OPTION PACKAGE SERVO) -NEW ELECTRIC COMPONENTS -NEW PNEUMATIC LINES -NEW PNEUMATIC COMPONENTS -OVERHAUL OR REPLACEMENT OF PNEUMATIC CYLINDER -RENEWAL OF THE VALVE TERMINAL -TUNING EXTRACTION PERFORMANCE -MINIMUM LUBRICATION SYSTEM OVERHAUL -GENERAL WEAR AND TEAR PARTS -OVERHAUL OF CABIN THE MACHINE IS EQUIPPED WITH: -SOUND INSULATION CABIN -MASS TIGHTENING POSSIBLE -HYDRAULIC CUTTING PREPARATION WARRANTY: WE TAKE FOR OUR SYSTEMS, UNLESS OTHERWISE AGREED, A 6 MONTH WARRANTY ON ALL REFURBISHED BY US OR EXCHANGED PARTS. WORKING TIME, AS WELL AS WEARING PARTS ARE EXCLUDED FROM THE WARRANTY. OPTIONAL: -FLAT MAGAZINE FOR AUTOMATIC FEEDING OF UP TO 6 M LONG MATERIALS -ROLLER CONVEYORS FOR STOCK -DELIVERY AND INSTALLATION IN YOUR HOME -TRAINING YOUR STAFF
Vendedor: Lupberger Systemlösungen OHG
Año de construcción: usado
Ubicación: Land-overhauled: 2018
year of construction: 1985-2017
band saw blade 4115 x 41 x 1,3 mm
engine output 4.0 kw
cutting speed 15-125 m / min
workspace square max: 260 x 260 mm
flat maximum work area: 260 x 260 mm
work area round max: 260 mm
workspace bundle max: 150 - 260 x 200 mm (optional beam voltage)
saw speed 0-40 mm / s adjustable
section length 5-650 mm (~ 9999 mm multiple hub)
nachschubgeschw. 125 mm / s
weight approx. 2200 kg
dimensions lxwxh 1670mm x2080mm x2130mm (chip scratch optional)

the machine is efficiently usable by their equipment and construction methods for a wide range of applications. the machine is completed retrofit, both technically and visually in mint condition. a visit of this saw system is possible at any time.

the machine will be overhauled on request in our house. among other things, following points are renewed:
-modification on plc control siemens s7
-conversion to ball screw drive servo system
-new electric components
-renewal of the pneumatic pipes
-new pneumatic components
-overhaul and renewal of the hydraulic pipes
-overhaul and renewal of hydraulic components
-overhaul of cabin
-overhaul of engines
-replacement of all bearings
-replacing common wear parts

the machine is equipped with:
-sound insulation cabin
-replenishment system with ball screw drive
cnc control with fully automatic cutting length presetting

warranty:
we take for our facilities unless otherwise agreed, a 6 month warranty on all refurbished by us or exchanged parts. working time, as well as wearing parts are excluded from the warranty.

optional:
-mass clamping device for the parallel processing of saw several workpieces
-roller conveyor 4 m / 6 m
-special roller conveyor 4 m / 6 m for bundle voltage
-flat magazine for automatic feeding of up to 6 m long materials
-motor 5,5 kw
-chip scratch
-delivery and installation in your home
-training your staff         OVERHAULED: 2018 YEAR OF CONSTRUCTION: 1985-2017 BAND SAW BLADE 4115 X 41 X 1,3 MM ENGINE OUTPUT 4.0 KW CUTTING SPEED 15-125 M / MIN WORKSPACE SQUARE MAX: 260 X 260 MM FLAT MAXIMUM WORK AREA: 260 X 260 MM WORK AREA ROUND MAX: 260 MM WORKSPACE BUNDLE MAX: 150 - 260 X 200 MM (OPTIONAL BEAM VOLTAGE) SAW SPEED 0-40 MM / S ADJUSTABLE SECTION LENGTH 5-650 MM (~ 9999 MM MULTIPLE HUB) NACHSCHUBGESCHW. 125 MM / S WEIGHT APPROX. 2200 KG DIMENSIONS LXWXH 1670MM X2080MM X2130MM (CHIP SCRATCH OPTIONAL) THE MACHINE IS EFFICIENTLY USABLE BY THEIR EQUIPMENT AND CONSTRUCTION METHODS FOR A WIDE RANGE OF APPLICATIONS. THE MACHINE IS COMPLETED RETROFIT, BOTH TECHNICALLY AND VISUALLY IN MINT CONDITION. A VISIT OF THIS SAW SYSTEM IS POSSIBLE AT ANY TIME. THE MACHINE WILL BE OVERHAULED ON REQUEST IN OUR HOUSE. AMONG OTHER THINGS, FOLLOWING POINTS ARE RENEWED: -MODIFICATION ON PLC CONTROL SIEMENS S7 -CONVERSION TO BALL SCREW DRIVE SERVO SYSTEM -NEW ELECTRIC COMPONENTS -RENEWAL OF THE PNEUMATIC PIPES -NEW PNEUMATIC COMPONENTS -OVERHAUL AND RENEWAL OF THE HYDRAULIC PIPES -OVERHAUL AND RENEWAL OF HYDRAULIC COMPONENTS -OVERHAUL OF CABIN -OVERHAUL OF ENGINES -REPLACEMENT OF ALL BEARINGS -REPLACING COMMON WEAR PARTS THE MACHINE IS EQUIPPED WITH: -SOUND INSULATION CABIN -REPLENISHMENT SYSTEM WITH BALL SCREW DRIVE CNC CONTROL WITH FULLY AUTOMATIC CUTTING LENGTH PRESETTING WARRANTY: WE TAKE FOR OUR FACILITIES UNLESS OTHERWISE AGREED, A 6 MONTH WARRANTY ON ALL REFURBISHED BY US OR EXCHANGED PARTS. WORKING TIME, AS WELL AS WEARING PARTS ARE EXCLUDED FROM THE WARRANTY. OPTIONAL: -MASS CLAMPING DEVICE FOR THE PARALLEL PROCESSING OF SAW SEVERAL WORKPIECES -ROLLER CONVEYOR 4 M / 6 M -SPECIAL ROLLER CONVEYOR 4 M / 6 M FOR BUNDLE VOLTAGE -FLAT MAGAZINE FOR AUTOMATIC FEEDING OF UP TO 6 M LONG MATERIALS -MOTOR 5,5 KW -CHIP SCRATCH -DELIVERY AND INSTALLATION IN YOUR HOME -TRAINING YOUR STAFF
Vendedor: Lupberger Systemlösungen OHG
Año de construcción: usado
Ubicación: Land-overhauled: 2018
year of construction: 2001
band saw blade 5800 x 41 x 1,3 mm
motor power approx. 11 kw with frequency control
cutting speed 20-170 m / min
square maximum work area: 430 x 430 mm
round maximum work area: 430 mm
section length 10-600 mm (~ 9999 mm multiple hub)
nachschubgeschw. max 400 mm / s
weight approx. 4500 kg
dimensions lxwxh 2910mm x3600mm x2200mm

the machine is both technically and optically after completed retrofit in mint condition. a visit of this saw system is possible at any time.

the machine will be overhauled in our house. among other things, following points are renewed:
-modification on plc control siemens s7
-renewal of the ball screw drive
-new electric components
-renewal of the pneumatic pipes
-new pneumatic components
-renewal of the hydraulic pipes
-overhaul and renewal of hydraulic components
-overhaul of cabin
-overhaul of engines
-replacement of all bearings
-replacing common wear parts

the machine is equipped with:
-reinforced motor 11 kw
-sound insulation cabin
-replenishment system with ball screw drive
-extension package for carbide saw blade
cnc control with fully automatic cutting length presetting
-band saw blade cleaning by means of two hydraulic motors
-hydraulic vertical tensioning device
-vibrating table for section problem
-free installation of the control panel

warranty:
we take for our systems, unless otherwise agreed, a 6 month warranty on all refurbished by us or exchanged parts. working time, as well as wearing parts are excluded from the warranty.

optional:
-hydraulic vertical clamping fixture up to 430 x 430 mm (430 x 270 mm)
-roller conveyor for feeding up to 18 m long materials
-flat magazine for automatic feeding of up to 6 m long materials
-cutting monitoring system
-conversion engine / transmission on aluminium specifications
online support connection
-delivery and installation in your home
-training your staff           OVERHAULED: 2018 YEAR OF CONSTRUCTION: 2001 BAND SAW BLADE 5800 X 41 X 1,3 MM MOTOR POWER APPROX. 11 KW WITH FREQUENCY CONTROL CUTTING SPEED 20-170 M / MIN SQUARE MAXIMUM WORK AREA: 430 X 430 MM ROUND MAXIMUM WORK AREA: 430 MM SECTION LENGTH 10-600 MM (~ 9999 MM MULTIPLE HUB) NACHSCHUBGESCHW. MAX 400 MM / S WEIGHT APPROX. 4500 KG DIMENSIONS LXWXH 2910MM X3600MM X2200MM THE MACHINE IS BOTH TECHNICALLY AND OPTICALLY AFTER COMPLETED RETROFIT IN MINT CONDITION. A VISIT OF THIS SAW SYSTEM IS POSSIBLE AT ANY TIME. THE MACHINE WILL BE OVERHAULED IN OUR HOUSE. AMONG OTHER THINGS, FOLLOWING POINTS ARE RENEWED: -MODIFICATION ON PLC CONTROL SIEMENS S7 -RENEWAL OF THE BALL SCREW DRIVE -NEW ELECTRIC COMPONENTS -RENEWAL OF THE PNEUMATIC PIPES -NEW PNEUMATIC COMPONENTS -RENEWAL OF THE HYDRAULIC PIPES -OVERHAUL AND RENEWAL OF HYDRAULIC COMPONENTS -OVERHAUL OF CABIN -OVERHAUL OF ENGINES -REPLACEMENT OF ALL BEARINGS -REPLACING COMMON WEAR PARTS THE MACHINE IS EQUIPPED WITH: -REINFORCED MOTOR 11 KW -SOUND INSULATION CABIN -REPLENISHMENT SYSTEM WITH BALL SCREW DRIVE -EXTENSION PACKAGE FOR CARBIDE SAW BLADE CNC CONTROL WITH FULLY AUTOMATIC CUTTING LENGTH PRESETTING -BAND SAW BLADE CLEANING BY MEANS OF TWO HYDRAULIC MOTORS -HYDRAULIC VERTICAL TENSIONING DEVICE -VIBRATING TABLE FOR SECTION PROBLEM -FREE INSTALLATION OF THE CONTROL PANEL WARRANTY: WE TAKE FOR OUR SYSTEMS, UNLESS OTHERWISE AGREED, A 6 MONTH WARRANTY ON ALL REFURBISHED BY US OR EXCHANGED PARTS. WORKING TIME, AS WELL AS WEARING PARTS ARE EXCLUDED FROM THE WARRANTY. OPTIONAL: -HYDRAULIC VERTICAL CLAMPING FIXTURE UP TO 430 X 430 MM (430 X 270 MM) -ROLLER CONVEYOR FOR FEEDING UP TO 18 M LONG MATERIALS -FLAT MAGAZINE FOR AUTOMATIC FEEDING OF UP TO 6 M LONG MATERIALS -CUTTING MONITORING SYSTEM -CONVERSION ENGINE / TRANSMISSION ON ALUMINIUM SPECIFICATIONS ONLINE SUPPORT CONNECTION -DELIVERY AND INSTALLATION IN YOUR HOME -TRAINING YOUR STAFF
Vendedor: Lupberger Systemlösungen OHG
Año de construcción: usado
Precio: 55.000 €
Ubicación: Land-machining center - vertical priminer delta center v6l camp-nr. 1105-02424 category machining center - vertical make priminer type delta center v6l year 2018 state second-hand machine control cnc storage france origin country germany  
delivery time immediately cargo base ex work haguenau

technical details x way 600 mm y-way 400 mm z-way 450 mm overall power demand 20 kw machine weight approx. 3.5 t description machine new with aim
 electr. establishment, coolant system ikz 20 bars, techdoc.
 cnc siemens 828 3d technical specifications delta center v6l
 cnc control siemens 828 3 d
 table dimensions mm 750 x 400 mm t-slots 14 x 3 x 125 mm
 maximum table load kg 350
 x/y/z stroke mm 600 / 400 / 450
 distance spindle/table surface mm 80-530
 distance spindle center / z axle cover 435 mm
 spindle retainer for sk 40 / 120 mm
 spindle speed rpm 10,000
 spindle motor kw 20 sk 40 7/15 number of tools in magazine pieces.
 max tool diameter 80 mm
 max tool diameter (without adjacent tools) 80/125 mm (next releas)
 max werzeuglã¤nge mm 280
 maximum tool weight kg 8
 48 m/min rapid traverse working feed mm/min 1-12,000
 positional accuracy mm â±0. 003/300
 repeatability mm â±0. 003
 usable area 1850 x 2530 x 2300 mm
 weight 3500 kg
 immediately available

with spindle oil cooler
 coulant trough spindle 20 bar 
 MACHINING CENTER - VERTICAL PRIMINER DELTA CENTER V6L CAMP-NR. 1105-02424 CATEGORY MACHINING CENTER - VERTICAL MAKE PRIMINER TYPE DELTA CENTER V6L YEAR 2018 STATE SECOND-HAND MACHINE CONTROL CNC STORAGE FRANCE ORIGIN COUNTRY GERMANY DELIVERY TIME IMMEDIATELY CARGO BASE EX WORK HAGUENAU TECHNICAL DETAILS X WAY 600 MM Y-WAY 400 MM Z-WAY 450 MM OVERALL POWER DEMAND 20 KW MACHINE WEIGHT APPROX. 3.5 T DESCRIPTION MACHINE NEW WITH AIM ELECTR. ESTABLISHMENT, COOLANT SYSTEM IKZ 20 BARS, TECHDOC. CNC SIEMENS 828 3D TECHNICAL SPECIFICATIONS DELTA CENTER V6L CNC CONTROL SIEMENS 828 3 D TABLE DIMENSIONS MM 750 X 400 MM T-SLOTS 14 X 3 X 125 MM MAXIMUM TABLE LOAD KG 350 X/Y/Z STROKE MM 600 / 400 / 450 DISTANCE SPINDLE/TABLE SURFACE MM 80-530 DISTANCE SPINDLE CENTER / Z AXLE COVER 435 MM SPINDLE RETAINER FOR SK 40 / 120 MM SPINDLE SPEED RPM 10,000 SPINDLE MOTOR KW 20 SK 40 7/15 NUMBER OF TOOLS IN MAGAZINE PIECES. MAX TOOL DIAMETER 80 MM MAX TOOL DIAMETER (WITHOUT ADJACENT TOOLS) 80/125 MM (NEXT RELEAS) MAX WERZEUGL&ATILDE;&CURREN;NGE MM 280 MAXIMUM TOOL WEIGHT KG 8 48 M/MIN RAPID TRAVERSE WORKING FEED MM/MIN 1-12,000 POSITIONAL ACCURACY MM &ACIRC;&PLUSMN;0. 003/300 REPEATABILITY MM &ACIRC;&PLUSMN;0. 003 USABLE AREA 1850 X 2530 X 2300 MM WEIGHT 3500 KG IMMEDIATELY AVAILABLE WITH SPINDLE OIL COOLER COULANT TROUGH SPINDLE 20 BAR
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-gebr. circular saw machine make eisele
	model va l pv type 094. no.: 1221 built 1988
	for non-ferrous metals

sã¤geblatt-ã? 400 mm
	schnitt-diameter:
	round 130 mm
		hollow profiles 160 x 110 mm
	section 5 - 600/1200 mm length
	saw speed infinitely variable 0-40 mm / s
	urgent return 80 mm / s
	replenishment speed 116 mm / s
	return stroke 116 mm / s
	motors:
	saw drive 6.5 / 8.5 kw
		feed 0.12 kw
	external dimensions:
	width 2000 mm
		1300 mm deep
		height 1800 mm
	weight approx.		1000 kg
	with:
	pneum.. voltage
		spraying device
		runway about 6 m
		sawdust eisele from s 1
		piece counting device 
 GEBR. CIRCULAR SAW MACHINE MAKE EISELE MODEL VA L PV TYPE 094. NO.: 1221 BUILT 1988 FOR NON-FERROUS METALS S&ATILDE;&CURREN;GEBLATT-&ATILDE;? 400 MM SCHNITT-DIAMETER: ROUND 130 MM HOLLOW PROFILES 160 X 110 MM SECTION 5 - 600/1200 MM LENGTH SAW SPEED INFINITELY VARIABLE 0-40 MM / S URGENT RETURN 80 MM / S REPLENISHMENT SPEED 116 MM / S RETURN STROKE 116 MM / S MOTORS: SAW DRIVE 6.5 / 8.5 KW FEED 0.12 KW EXTERNAL DIMENSIONS: WIDTH 2000 MM 1300 MM DEEP HEIGHT 1800 MM WEIGHT APPROX. 1000 KG WITH: PNEUM.. VOLTAGE SPRAYING DEVICE RUNWAY ABOUT 6 M SAWDUST EISELE FROM S 1 PIECE COUNTING DEVICE
Vendedor: RUDOLF BANDMANN WERKZEUGMASCHINEN e.K.
Año de construcción: usado
Ubicación: Land-refurbished: 2018
plc: siemens s7
saw blade 550 mm
engine power 11 kw
saw blade feed 0-3000 mm / min
cutting speed (sb 500 mm): 4500 m / min
(sb 550 mm): 5100 m / min
square maximum work area: 170 x 170 mm
flat maximum work area: 380 x 75 mm
round maximum work area: 165 mm
supply length 10-1000 mm
nachschubgeschw. max 350 mm / s
(saw) approximate weight: 2500 kg
(magazine) about: 1000 kg
dimensions lxwxh (saw) about: 2800mm x 1600mm x 2200mm
(magazine) about: 3300 x 2200mm x 1800mm
footprint lxw 6100 mm x 2200 mm

the machine was overhauled 2014 in our house. among others were renewed following points:

-new plc control
-new elgo positioning system
-new electric components
-new pneumatic lines
-ueberholte pneumatic components
-new valve terminal
-revision of the extraction
-overhaul menzel minimal lubrication system
-replacing common wear parts
-overhaul of the soundproofing cabin

the machine is equipped with:
-a flat magazine for 3 m rods (optional 6 m)
-reinforced motor 11 kw
-reinforced material replenishment unit hydraulic
-sound insulation cabin
-gap extension (for a high-quality cutting surface without return tracks)

the machine is efficiently usable by their equipment and construction methods for a wide range of applications. the magazine and the elgo positioning system ensures easy and very profitable operation of the plant. on the basis of the high-performance motor as well as the reinforced material feeding unit, short cycle times can be even when the saw different profiles or vollmaterialen be achieved. the soundproof cabin this reduces the noise emissions to a minimum.

the saw unit is in like new condition and is ready for use immediately. she can be visited at any time under power with us in the house.

optional:
-flat magazine extension 6 m
-delivery and installation in your home
-training your staff
         REFURBISHED: 2018 PLC: SIEMENS S7 SAW BLADE 550 MM ENGINE POWER 11 KW SAW BLADE FEED 0-3000 MM / MIN CUTTING SPEED (SB 500 MM): 4500 M / MIN (SB 550 MM): 5100 M / MIN SQUARE MAXIMUM WORK AREA: 170 X 170 MM FLAT MAXIMUM WORK AREA: 380 X 75 MM ROUND MAXIMUM WORK AREA: 165 MM SUPPLY LENGTH 10-1000 MM NACHSCHUBGESCHW. MAX 350 MM / S (SAW) APPROXIMATE WEIGHT: 2500 KG (MAGAZINE) ABOUT: 1000 KG DIMENSIONS LXWXH (SAW) ABOUT: 2800MM X 1600MM X 2200MM (MAGAZINE) ABOUT: 3300 X 2200MM X 1800MM FOOTPRINT LXW 6100 MM X 2200 MM THE MACHINE WAS OVERHAULED 2014 IN OUR HOUSE. AMONG OTHERS WERE RENEWED FOLLOWING POINTS: -NEW PLC CONTROL -NEW ELGO POSITIONING SYSTEM -NEW ELECTRIC COMPONENTS -NEW PNEUMATIC LINES -UEBERHOLTE PNEUMATIC COMPONENTS -NEW VALVE TERMINAL -REVISION OF THE EXTRACTION -OVERHAUL MENZEL MINIMAL LUBRICATION SYSTEM -REPLACING COMMON WEAR PARTS -OVERHAUL OF THE SOUNDPROOFING CABIN THE MACHINE IS EQUIPPED WITH: -A FLAT MAGAZINE FOR 3 M RODS (OPTIONAL 6 M) -REINFORCED MOTOR 11 KW -REINFORCED MATERIAL REPLENISHMENT UNIT HYDRAULIC -SOUND INSULATION CABIN -GAP EXTENSION (FOR A HIGH-QUALITY CUTTING SURFACE WITHOUT RETURN TRACKS) THE MACHINE IS EFFICIENTLY USABLE BY THEIR EQUIPMENT AND CONSTRUCTION METHODS FOR A WIDE RANGE OF APPLICATIONS. THE MAGAZINE AND THE ELGO POSITIONING SYSTEM ENSURES EASY AND VERY PROFITABLE OPERATION OF THE PLANT. ON THE BASIS OF THE HIGH-PERFORMANCE MOTOR AS WELL AS THE REINFORCED MATERIAL FEEDING UNIT, SHORT CYCLE TIMES CAN BE EVEN WHEN THE SAW DIFFERENT PROFILES OR VOLLMATERIALEN BE ACHIEVED. THE SOUNDPROOF CABIN THIS REDUCES THE NOISE EMISSIONS TO A MINIMUM. THE SAW UNIT IS IN LIKE NEW CONDITION AND IS READY FOR USE IMMEDIATELY. SHE CAN BE VISITED AT ANY TIME UNDER POWER WITH US IN THE HOUSE. OPTIONAL: -FLAT MAGAZINE EXTENSION 6 M -DELIVERY AND INSTALLATION IN YOUR HOME -TRAINING YOUR STAFF
Vendedor: Lupberger Systemlösungen OHG
Año de construcción: usado
Ubicación: Land-l + z lathe weiler matador vs * geometric overhauled *-04-03-223 delivery: upon request number: 04-03-223 manufacturer: weiler type: outdated matador vs * geometric *.

machine data year: mint l x w x h: 1500 x 1000 x 1700 mm weight: 600 kg
geometric overhauled neuwertiger zustand-
incl. certificates according to manufacturer guidelines incl. 12 month warranty on the geometry of the machine technical data digital display: 3 - axes - digital display new dimensions: max turning diameter over bed: approx. ã? 280 mm max turning diameter over support: approx. ã? 160 mm maximum turning length: approx. 500 mm bar passage: approx. ã? 36 mm spindle: speed range: approx. 15-3550 rpm spindle nose: a 2 - 5 power: approx. 3.0 kw automatic longitudinal & plan vorschuebe: feed range: approx. 0.05 - 0.80 mm / u suitable for threaded:-m etrisch 0.20-12 mm - inch 80-2 gg / "- diametral - pitch threaded 160 - 6 dp - module 0.1 - 4 live: mk 3 accessories â?¢ 3 - bake - chuck ã? 160 mm new â?¢ quick change toolpost + 3 inserts â?¢ electric chuck guard â?¢ work light â?¢ coolant" establishment â?¢ complete machine documentation â?¢ emergency â?¢ drill chuck for tailstock new â?¢ revolving tailstock new tip â?¢ various wrenches â?¢ feet â?¢ collets - setup (option) â?¢ cover l & z - spindle (option) â?¢ motor mi t motor brake (option)

accessories on request price and other specifications on request L + Z LATHE WEILER MATADOR VS * GEOMETRIC OVERHAULED *-04-03-223 DELIVERY: UPON REQUEST NUMBER: 04-03-223 MANUFACTURER: WEILER TYPE: OUTDATED MATADOR VS * GEOMETRIC *. MACHINE DATA YEAR: MINT L X W X H: 1500 X 1000 X 1700 MM WEIGHT: 600 KG GEOMETRIC OVERHAULED NEUWERTIGER ZUSTAND- INCL. CERTIFICATES ACCORDING TO MANUFACTURER GUIDELINES INCL. 12 MONTH WARRANTY ON THE GEOMETRY OF THE MACHINE TECHNICAL DATA DIGITAL DISPLAY: 3 - AXES - DIGITAL DISPLAY NEW DIMENSIONS: MAX TURNING DIAMETER OVER BED: APPROX. &ATILDE;? 280 MM MAX TURNING DIAMETER OVER SUPPORT: APPROX. &ATILDE;? 160 MM MAXIMUM TURNING LENGTH: APPROX. 500 MM BAR PASSAGE: APPROX. &ATILDE;? 36 MM SPINDLE: SPEED RANGE: APPROX. 15-3550 RPM SPINDLE NOSE: A 2 - 5 POWER: APPROX. 3.0 KW AUTOMATIC LONGITUDINAL & PLAN VORSCHUEBE: FEED RANGE: APPROX. 0.05 - 0.80 MM / U SUITABLE FOR THREADED:-M ETRISCH 0.20-12 MM - INCH 80-2 GG / "- DIAMETRAL - PITCH THREADED 160 - 6 DP - MODULE 0.1 - 4 LIVE: MK 3 ACCESSORIES &ACIRC;?&CENT; 3 - BAKE - CHUCK &ATILDE;? 160 MM NEW &ACIRC;?&CENT; QUICK CHANGE TOOLPOST + 3 INSERTS &ACIRC;?&CENT; ELECTRIC CHUCK GUARD &ACIRC;?&CENT; WORK LIGHT &ACIRC;?&CENT; COOLANT" ESTABLISHMENT &ACIRC;?&CENT; COMPLETE MACHINE DOCUMENTATION &ACIRC;?&CENT; EMERGENCY &ACIRC;?&CENT; DRILL CHUCK FOR TAILSTOCK NEW &ACIRC;?&CENT; REVOLVING TAILSTOCK NEW TIP &ACIRC;?&CENT; VARIOUS WRENCHES &ACIRC;?&CENT; FEET &ACIRC;?&CENT; COLLETS - SETUP (OPTION) &ACIRC;?&CENT; COVER L & Z - SPINDLE (OPTION) &ACIRC;?&CENT; MOTOR MI T MOTOR BRAKE (OPTION) ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Precio: 19.750 £
Ubicación: Land-only 28k run hours.  at our works in wellingborough awaiting refurbishment. tie-barless engel 80t originally manufactured in 2002. engel have become renowned for their innovative design which allows this 80t machine to mould with a wide variety of tools that other 80t machines couldn’t fit in. if you’re not familiar with this tie-barless design, feel free to make an appointment to view the machine and take a closer look.

manufacturer: engel
model: vc 330/80
viewing: available to inspect by appointment
condition: refurbished with guarantee
year: 2002
clamp force (t): 80
screw diameter (mm): 25
max shot weight (ps) (g): 62
control system: microprocessor
lead time: august
hours: 27786
in production: yes
location: stv machinery

refurbished machines from stv machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. a production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. machines are ultra clean and cosmetically as good as we can get them. we guarantee our refurbished machines are delivered fault free and leak free.   ONLY 28K RUN HOURS. AT OUR WORKS IN WELLINGBOROUGH AWAITING REFURBISHMENT. TIE-BARLESS ENGEL 80T ORIGINALLY MANUFACTURED IN 2002. ENGEL HAVE BECOME RENOWNED FOR THEIR INNOVATIVE DESIGN WHICH ALLOWS THIS 80T MACHINE TO MOULD WITH A WIDE VARIETY OF TOOLS THAT OTHER 80T MACHINES COULDN’T FIT IN. IF YOU’RE NOT FAMILIAR WITH THIS TIE-BARLESS DESIGN, FEEL FREE TO MAKE AN APPOINTMENT TO VIEW THE MACHINE AND TAKE A CLOSER LOOK. MANUFACTURER: ENGEL MODEL: VC 330/80 VIEWING: AVAILABLE TO INSPECT BY APPOINTMENT CONDITION: REFURBISHED WITH GUARANTEE YEAR: 2002 CLAMP FORCE (T): 80 SCREW DIAMETER (MM): 25 MAX SHOT WEIGHT (PS) (G): 62 CONTROL SYSTEM: MICROPROCESSOR LEAD TIME: AUGUST HOURS: 27786 IN PRODUCTION: YES LOCATION: STV MACHINERY REFURBISHED MACHINES FROM STV MACHINERY UNDERGO A COMPREHENSIVE TEST PROCEDURE DURING WHICH EVERY FUNCTION OF THE MACHINE IS TESTED AND IF NECESSARY REPAIRED. A PRODUCTION RUN OF AT LEAST 5000 FAULT FREE CYCLES PRIOR TO SIGN OFF ENSURES TROUBLE FREE OPERATION ONCE DELIVERED. MACHINES ARE ULTRA CLEAN AND COSMETICALLY AS GOOD AS WE CAN GET THEM. WE GUARANTEE OUR REFURBISHED MACHINES ARE DELIVERED FAULT FREE AND LEAK FREE.
Vendedor: STVmachinery
Año de construcción: usado
Precio: 8.500 £
Ubicación: Land-this is an arburg 220m 350-90u machine which is currently awaiting refurbishment at our works.  the ‘u’ range from arburg allows for the clamp and injection units to be pivoted vertically which is ideal for insert moulding.  these machines were an expensive option when originally manufactured so we don’t tend to see them that often on the used market.

manufacturer: arburg
model: 220m 350-90u
viewing: available to inspect by appointment
condition: refurbished with guarantee
clamp force (t): 35
control system: multronica
lead time: 6 weeks from order
in production: yes

any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 4 weeks from order.

refurbished machines from stv machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. a production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. machines are ultra clean and cosmetically as good as we can get them. we guarantee our refurbs are delivered fault free and leak free.  THIS IS AN ARBURG 220M 350-90U MACHINE WHICH IS CURRENTLY AWAITING REFURBISHMENT AT OUR WORKS. THE ‘U’ RANGE FROM ARBURG ALLOWS FOR THE CLAMP AND INJECTION UNITS TO BE PIVOTED VERTICALLY WHICH IS IDEAL FOR INSERT MOULDING. THESE MACHINES WERE AN EXPENSIVE OPTION WHEN ORIGINALLY MANUFACTURED SO WE DON’T TEND TO SEE THEM THAT OFTEN ON THE USED MARKET. MANUFACTURER: ARBURG MODEL: 220M 350-90U VIEWING: AVAILABLE TO INSPECT BY APPOINTMENT CONDITION: REFURBISHED WITH GUARANTEE CLAMP FORCE (T): 35 CONTROL SYSTEM: MULTRONICA LEAD TIME: 6 WEEKS FROM ORDER IN PRODUCTION: YES ANY MACHINES AWAITING REFURBISHMENT WITH US CAN BE RESERVED WITH A 10% DEPOSIT AND WE THEN PRIORITISE THE REFURBISHMENT AND AIM TO HAVE THE MACHINE AVAILABLE FOR INSPECTION WITHIN 4 WEEKS FROM ORDER. REFURBISHED MACHINES FROM STV MACHINERY UNDERGO A COMPREHENSIVE TEST PROCEDURE DURING WHICH EVERY FUNCTION OF THE MACHINE IS TESTED AND IF NECESSARY REPAIRED. A PRODUCTION RUN OF AT LEAST 5000 FAULT FREE CYCLES PRIOR TO SIGN OFF ENSURES TROUBLE FREE OPERATION ONCE DELIVERED. MACHINES ARE ULTRA CLEAN AND COSMETICALLY AS GOOD AS WE CAN GET THEM. WE GUARANTEE OUR REFURBS ARE DELIVERED FAULT FREE AND LEAK FREE.
Vendedor: STVmachinery
Año de construcción: usado
Ubicación: Land-year of construction: 1995-2010
power: saw motor 5,5kw
square 90â° maximum working range: 360 x 360 mm
workspace flat 90â° max: 360 x 360 mm
work area round 90â° max: 360 mm
section length: 10-9999 mm
supply speed to 300 mm / s
(saw) approximate weight: approx. 2500 kg
dimensions lxwxh (saw) about: 2450mm x3000mm x2050mm
lxb floor space: 2450 mm x3000mm

the machine is efficiently usable by their equipment and construction methods for a wide range of applications. the machine is both technically and optically after completed retrofit in mint condition. a visit of this saw system is possible at any time.

the machine will be overhauled on request in our house. among others were renewed following points:

-modification on plc control siemens s7
-renewal of the ball screw drive with asynchronous control
-new electric components
-renewal of the pneumatic pipes
-new pneumatic components
-renewal of the hydraulic pipes
-overhaul and renewal of hydraulic components
-overhaul of engines
-replacement of all bearings
-replacing common wear parts

the machine is equipped with:
-replenishment system with ball screw drive
cnc control with fully automatic cutting length presetting

warranty:
we take for our systems, unless otherwise agreed, a 6 month warranty on all refurbished by us or exchanged parts. working time, as well as wearing parts are excluded from the warranty.

optional:
-hydraulic vertical tensioning device
-roller conveyor for feeding up to 18 m long materials
-flat magazine for automatic feeding of up to 6 m long materials
-cutting monitoring system
-conversion engine / transmission on aluminium specifications
online support connection
-delivery and installation in your home
-training your staff
      YEAR OF CONSTRUCTION: 1995-2010 POWER: SAW MOTOR 5,5KW SQUARE 90&ACIRC;&DEG; MAXIMUM WORKING RANGE: 360 X 360 MM WORKSPACE FLAT 90&ACIRC;&DEG; MAX: 360 X 360 MM WORK AREA ROUND 90&ACIRC;&DEG; MAX: 360 MM SECTION LENGTH: 10-9999 MM SUPPLY SPEED TO 300 MM / S (SAW) APPROXIMATE WEIGHT: APPROX. 2500 KG DIMENSIONS LXWXH (SAW) ABOUT: 2450MM X3000MM X2050MM LXB FLOOR SPACE: 2450 MM X3000MM THE MACHINE IS EFFICIENTLY USABLE BY THEIR EQUIPMENT AND CONSTRUCTION METHODS FOR A WIDE RANGE OF APPLICATIONS. THE MACHINE IS BOTH TECHNICALLY AND OPTICALLY AFTER COMPLETED RETROFIT IN MINT CONDITION. A VISIT OF THIS SAW SYSTEM IS POSSIBLE AT ANY TIME. THE MACHINE WILL BE OVERHAULED ON REQUEST IN OUR HOUSE. AMONG OTHERS WERE RENEWED FOLLOWING POINTS: -MODIFICATION ON PLC CONTROL SIEMENS S7 -RENEWAL OF THE BALL SCREW DRIVE WITH ASYNCHRONOUS CONTROL -NEW ELECTRIC COMPONENTS -RENEWAL OF THE PNEUMATIC PIPES -NEW PNEUMATIC COMPONENTS -RENEWAL OF THE HYDRAULIC PIPES -OVERHAUL AND RENEWAL OF HYDRAULIC COMPONENTS -OVERHAUL OF ENGINES -REPLACEMENT OF ALL BEARINGS -REPLACING COMMON WEAR PARTS THE MACHINE IS EQUIPPED WITH: -REPLENISHMENT SYSTEM WITH BALL SCREW DRIVE CNC CONTROL WITH FULLY AUTOMATIC CUTTING LENGTH PRESETTING WARRANTY: WE TAKE FOR OUR SYSTEMS, UNLESS OTHERWISE AGREED, A 6 MONTH WARRANTY ON ALL REFURBISHED BY US OR EXCHANGED PARTS. WORKING TIME, AS WELL AS WEARING PARTS ARE EXCLUDED FROM THE WARRANTY. OPTIONAL: -HYDRAULIC VERTICAL TENSIONING DEVICE -ROLLER CONVEYOR FOR FEEDING UP TO 18 M LONG MATERIALS -FLAT MAGAZINE FOR AUTOMATIC FEEDING OF UP TO 6 M LONG MATERIALS -CUTTING MONITORING SYSTEM -CONVERSION ENGINE / TRANSMISSION ON ALUMINIUM SPECIFICATIONS ONLINE SUPPORT CONNECTION -DELIVERY AND INSTALLATION IN YOUR HOME -TRAINING YOUR STAFF
Vendedor: Lupberger Systemlösungen OHG
Año de construcción: usado
Precio: 38.000 €
Ubicación: Land-flour packaging machine 1kg 20 pack/min, italian with end pack vrapper (2x5kg) completely refurbishment 2017 by us, with garanty 1 year  FLOUR PACKAGING MACHINE 1KG 20 PACK/MIN, ITALIAN WITH END PACK VRAPPER (2X5KG) COMPLETELY REFURBISHMENT 2017 BY US, WITH GARANTY 1 YEAR
Vendedor: Multipak D.O.O.
Año de construcción: usado
Ubicación: Land-workpiece dimensions: 105-750x405-110x3-8mm, compressed air supply: 6-8bar, weight: 1.1t.  WORKPIECE DIMENSIONS: 105-750X405-110X3-8MM, COMPRESSED AIR SUPPLY: 6-8BAR, WEIGHT: 1.1T.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 81.375 €
Ubicación: Land-the line for the production of pvc pipes thyson l-25 (1993/2000) is a line for three-layer pipes.

the thyson l25 pvc line includes:
- thyson / par 2-88 extruder
- metalchem / 2t14 / 8m side extruder
- bath reifenhauser / kke-r0250
- reifenhauser / kke-r0250 cooling bath
- reifenhauser / ke25 / 4 cooling bath
- sica / tsq saw
- reifenhauser / ba.cah.1t50.250 expander machine
- sica model p-250/4 extraction

technical data :
- production with efficiency: up to 350 kg
- production capacity: 75-250 mm
- line after general refurbishment in 2016
  THE LINE FOR THE PRODUCTION OF PVC PIPES THYSON L-25 (1993/2000) IS A LINE FOR THREE-LAYER PIPES. THE THYSON L25 PVC LINE INCLUDES: - THYSON / PAR 2-88 EXTRUDER - METALCHEM / 2T14 / 8M SIDE EXTRUDER - BATH REIFENHAUSER / KKE-R0250 - REIFENHAUSER / KKE-R0250 COOLING BATH - REIFENHAUSER / KE25 / 4 COOLING BATH - SICA / TSQ SAW - REIFENHAUSER / BA.CAH.1T50.250 EXPANDER MACHINE - SICA MODEL P-250/4 EXTRACTION TECHNICAL DATA : - PRODUCTION WITH EFFICIENCY: UP TO 350 KG - PRODUCTION CAPACITY: 75-250 MM - LINE AFTER GENERAL REFURBISHMENT IN 2016
Vendedor: MASZYNERIA SP. Z O.O.
Año de construcción: usado
Precio: 35.000 €
Ubicación: Land-triomax cnc machine is practically like new. the machine of the highest grade for the production of a wide assortment of pastries, cakes and other products. the unique feature of the machine is a three hoppers equipped with special spiral rolls of stainless steel, making triomac cnc can run on almost any test:<br>o shortbread<br>o brewing<br>o gingerbread<br>o biscuit<br>o muffins - muffins with a filling and fruit pieces<br>o eclairs<br>o marshmallows<br>types of products: one color with filling and / or decoration, two-colored with filling or decoration, with the help of cutting string, sponge cakes, peas and strips.<br><br>- two heads<br>- industrial drivers ensures fast and exact positioning<br>- table with automatic sheet feeding (13 trays, automatic indeed of trays)<br>- hermetical manufactured heads are able to work with thick dough and dough for shortbread cookies<br>- working width of heads 600 mm (tray 600 x 400 mm)<br>-  usage of different speed for trays possible (marks motion and extrusion speed), which enhances the productivity<br>- adjustable speed of elevation and lowering of a table<br>- adjustable height of lowering of the table (can be different for each type of a product, possibility of putting the dough in high (10 cm) moulds, and, by using other recipe to lower the table for the cake heigh, e.g. 1 cm. this land to increase in productivity)<br>- possibility to produce layered cake with several stops<br>- smooth adjustment of dough extracting rolls <br>- plc controllers with memory <br>- control panels on the machine<br><br>in triomax cnc began to use digital servo drives. due to this, triomax cnc high-precision, high-performance machine with simple operation and very reliable.; like new TRIOMAX CNC MACHINE IS PRACTICALLY LIKE NEW. THE MACHINE OF THE HIGHEST GRADE FOR THE PRODUCTION OF A WIDE ASSORTMENT OF PASTRIES, CAKES AND OTHER PRODUCTS. THE UNIQUE FEATURE OF THE MACHINE IS A THREE HOPPERS EQUIPPED WITH SPECIAL SPIRAL ROLLS OF STAINLESS STEEL, MAKING TRIOMAC CNC CAN RUN ON ALMOST ANY TEST:
O SHORTBREAD
O BREWING
O GINGERBREAD
O BISCUIT
O MUFFINS - MUFFINS WITH A FILLING AND FRUIT PIECES
O ECLAIRS
O MARSHMALLOWS
TYPES OF PRODUCTS: ONE COLOR WITH FILLING AND / OR DECORATION, TWO-COLORED WITH FILLING OR DECORATION, WITH THE HELP OF CUTTING STRING, SPONGE CAKES, PEAS AND STRIPS.

- TWO HEADS
- INDUSTRIAL DRIVERS ENSURES FAST AND EXACT POSITIONING
- TABLE WITH AUTOMATIC SHEET FEEDING (13 TRAYS, AUTOMATIC INDEED OF TRAYS)
- HERMETICAL MANUFACTURED HEADS ARE ABLE TO WORK WITH THICK DOUGH AND DOUGH FOR SHORTBREAD COOKIES
- WORKING WIDTH OF HEADS 600 MM (TRAY 600 X 400 MM)
-  USAGE OF DIFFERENT SPEED FOR TRAYS POSSIBLE (MARKS MOTION AND EXTRUSION SPEED), WHICH ENHANCES THE PRODUCTIVITY
- ADJUSTABLE SPEED OF ELEVATION AND LOWERING OF A TABLE
- ADJUSTABLE HEIGHT OF LOWERING OF THE TABLE (CAN BE DIFFERENT FOR EACH TYPE OF A PRODUCT, POSSIBILITY OF PUTTING THE DOUGH IN HIGH (10 CM) MOULDS, AND, BY USING OTHER RECIPE TO LOWER THE TABLE FOR THE CAKE HEIGH, E.G. 1 CM. THIS LAND TO INCREASE IN PRODUCTIVITY)
- POSSIBILITY TO PRODUCE LAYERED CAKE WITH SEVERAL STOPS
- SMOOTH ADJUSTMENT OF DOUGH EXTRACTING ROLLS 
- PLC CONTROLLERS WITH MEMORY 
- CONTROL PANELS ON THE MACHINE

IN TRIOMAX CNC BEGAN TO USE DIGITAL SERVO DRIVES. DUE TO THIS, TRIOMAX CNC HIGH-PRECISION, HIGH-PERFORMANCE MACHINE WITH SIMPLE OPERATION AND VERY RELIABLE.; LIKE NEW
Vendedor: Middle East Trading
Año de construcción: usado
Precio: 81.250 €
Ubicación: Land-manufactured by m.c. automations (italy)<br>model: mc 1 boero 2a<br>year 2006<br>suitable for solid and filled chocolates with flat bottom, symmetrical and not, moulded or enrobed such as pralines, neapolitans, bars, batons, nougat, chocolate enrbed fruits, jelly and marshmallow.<br>current format: chocolate 30 mm diameter x 23 mm height<br><br>it is always possible to transform the mc1 to handle a new wrapping style by replacing the wrapping group, feeding system, and/or the discharge devices according to your needs.; very good working condition MANUFACTURED BY M.C. AUTOMATIONS (ITALY)
MODEL: MC 1 BOERO 2A
YEAR 2006
SUITABLE FOR SOLID AND FILLED CHOCOLATES WITH FLAT BOTTOM, SYMMETRICAL AND NOT, MOULDED OR ENROBED SUCH AS PRALINES, NEAPOLITANS, BARS, BATONS, NOUGAT, CHOCOLATE ENRBED FRUITS, JELLY AND MARSHMALLOW.
CURRENT FORMAT: CHOCOLATE 30 MM DIAMETER X 23 MM HEIGHT

IT IS ALWAYS POSSIBLE TO TRANSFORM THE MC1 TO HANDLE A NEW WRAPPING STYLE BY REPLACING THE WRAPPING GROUP, FEEDING SYSTEM, AND/OR THE DISCHARGE DEVICES ACCORDING TO YOUR NEEDS.; VERY GOOD WORKING CONDITION
Vendedor: Middle East Trading
Año de construcción: usado
Precio: 135.000 €
Ubicación: Land-line for chocolate coated marshmallow sandwich biscuits (mallow on biscuits)<br>manufactured by hd teknik makine <br>year 2014<br><br>includes:<br>- syrup tank<br>- foam mixer<br>- chocolate coating<br>- horizontal cooling tunnel (30 meters) / unused<br>line capacity 10 tons / day; good condition LINE FOR CHOCOLATE COATED MARSHMALLOW SANDWICH BISCUITS (MALLOW ON BISCUITS)
MANUFACTURED BY HD TEKNIK MAKINE
YEAR 2014

INCLUDES:
- SYRUP TANK
- FOAM MIXER
- CHOCOLATE COATING
- HORIZONTAL COOLING TUNNEL (30 METERS) / UNUSED
LINE CAPACITY 10 TONS / DAY; GOOD CONDITION
Vendedor: Middle East Trading
Año de construcción: usado
Ubicación: Land-technical data:

-format: 3.000 x 1.500 mm
-year of construction: 2015
-loadmaster incl. loading station and cow magnets
-magnet device to the loadmaster
-establishment of special machine
-suitable for trumpf trulaser 3030 / 5030
-machine had in reducing nc a 7, 000 h

(errors and omissions in the technical data, information and prices and subject to prior sale!)           TECHNICAL DATA: -FORMAT: 3.000 X 1.500 MM -YEAR OF CONSTRUCTION: 2015 -LOADMASTER INCL. LOADING STATION AND COW MAGNETS -MAGNET DEVICE TO THE LOADMASTER -ESTABLISHMENT OF SPECIAL MACHINE -SUITABLE FOR TRUMPF TRULASER 3030 / 5030 -MACHINE HAD IN REDUCING NC A 7, 000 H (ERRORS AND OMISSIONS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: imc solutions GmbH
Año de construcción: usado
Precio: 6.676 €
Ubicación: Land-camp stage / shelf stage 10.180 7,800 mm<br/>  <br/>  virgin material<br/>  <br/>  incl. approx. 80 meters floor shelves<br/>  <br/>  we offer you here a shelf stage.<br/>  <br/>  this shelf stage offers the advantages of a<br/>  optimal use of space and<br/>  a multiplication of your storage capacity,<br/>  in same size.<br/>  <br/>  technical data warehouse platform:<br/>  base area: 7.800 x 10.180 mm<br/>  top height: 2.542 mm<br/>  flooring: 350 kg<br/>  <br/>  technical data floor shelves:<br/>  <br/>  shelf height: 2500 mm<br/>  shelves depth: 400 mm<br/>  field width: 1200 mm<br/>  shelf lengths: approx. 9800 mm<br/>  number of rows of shelves: 8 pieces<br/>  number of shelves: 4 pieces<br/>  load capacity: 205 kg<br/>  field capacity: 2600 kg<br/>  <br/>  included in the scope of delivery:<br/>  <br/>  72 piece shelf stand uni rack usa, 425 x 2500 mm<br/>  512 piece traverses s-1, 1200 mm<br/>  512 piece shelves h-12, 600 x 600 mm<br/>  4 mm galvanized 9 piece u-profiles, 7500 mm long<br/>  16 piece of chipboard 5250 x 1030 x 38 mm, one side white<br/>  includes all screws, nuts and ground anchors<br/>  <br/>  stairs, railings and palette transfer station for an additional fee can be delivered.<br/>  <br/>  if you need other dimensions, please enquire.<br/>  <br/>  on request, we would take over and the establishment.<br/>  <br/>  prices on request.<br/>  <br/>  free shipping on request!; yes CAMP STAGE / SHELF STAGE 10.180 7,800 MM

VIRGIN MATERIAL

INCL. APPROX. 80 METERS FLOOR SHELVES

WE OFFER YOU HERE A SHELF STAGE.

THIS SHELF STAGE OFFERS THE ADVANTAGES OF A
OPTIMAL USE OF SPACE AND
A MULTIPLICATION OF YOUR STORAGE CAPACITY,
IN SAME SIZE.

TECHNICAL DATA WAREHOUSE PLATFORM:
BASE AREA: 7.800 X 10.180 MM
TOP HEIGHT: 2.542 MM
FLOORING: 350 KG

TECHNICAL DATA FLOOR SHELVES:

SHELF HEIGHT: 2500 MM
SHELVES DEPTH: 400 MM
FIELD WIDTH: 1200 MM
SHELF LENGTHS: APPROX. 9800 MM
NUMBER OF ROWS OF SHELVES: 8 PIECES
NUMBER OF SHELVES: 4 PIECES
LOAD CAPACITY: 205 KG
FIELD CAPACITY: 2600 KG

INCLUDED IN THE SCOPE OF DELIVERY:

72 PIECE SHELF STAND UNI RACK USA, 425 X 2500 MM
512 PIECE TRAVERSES S-1, 1200 MM
512 PIECE SHELVES H-12, 600 X 600 MM
4 MM GALVANIZED 9 PIECE U-PROFILES, 7500 MM LONG
16 PIECE OF CHIPBOARD 5250 X 1030 X 38 MM, ONE SIDE WHITE
INCLUDES ALL SCREWS, NUTS AND GROUND ANCHORS

STAIRS, RAILINGS AND PALETTE TRANSFER STATION FOR AN ADDITIONAL FEE CAN BE DELIVERED.

IF YOU NEED OTHER DIMENSIONS, PLEASE ENQUIRE.

ON REQUEST, WE WOULD TAKE OVER AND THE ESTABLISHMENT.

PRICES ON REQUEST.

FREE SHIPPING ON REQUEST!; YES
Vendedor: Lücht & Palm GmbH
Año de construcción: usado
Precio: 17.500 €
Ubicación: Land-roll long goods warehouse, or honeycomb rack, including wagons, at least 60 compartments, compartment size currently 1,20 x 0, 50 m - used:<br/>   <br/>  price from site: eur17.500.-(net), dismantled and loaded!<br/>   <br/>  manufacturer: wenco<br/>  year of construction: 2001<br/>  load capacity per compartment: unknown - no nameplate, the customer stores but without problems approximately 1.2 to wood per trade<br/>  each box has 4 posts (or frame) in the depth, the depth of the subjects can be altered by an other establishment and the constellation of the post!<br/>  in the area with the higher part there is a gear design<br/>  a proprietary design is the stage that has built the customer still on it!<br/>  to protect against unwanted out roll the rollers can be fixed.<br/>  frame height: mind. 10 fields 2, 40 m high and 5 fields about 5 m high<br/>  each low field, there are 4 storage levels = 10 x 4 = 40 levels<br/>  each low field, there are 4 storage levels = 5 x 4 = 20 levels<br/>  another material - so rolls etc are mounted!<br/>  post thickness or width: 9 cm<br/>  depth of the fields: 3, 75 m<br/>  the embedded long goods can be longer - back is to the wall space.<br/>  depth of stored wood currently 5, 10-6 m would also be possible<br/>  in each compartment or between each post is a truss with a role.<br/>  clear width / compartment width: approx. 1, 20 m<br/>  compartment height: currently approx. 50 cm - the distance can be changed but!<br/>  distance between the posts: approx. 1, 30 m<br/>  tip height. 9-10cm<br/>  with the help of the charging car easily can larger lot e ROLL LONG GOODS WAREHOUSE, OR HONEYCOMB RACK, INCLUDING WAGONS, AT LEAST 60 COMPARTMENTS, COMPARTMENT SIZE CURRENTLY 1,20 X 0, 50 M - USED:

PRICE FROM SITE: EUR17.500.-(NET), DISMANTLED AND LOADED!

MANUFACTURER: WENCO
YEAR OF CONSTRUCTION: 2001
LOAD CAPACITY PER COMPARTMENT: UNKNOWN - NO NAMEPLATE, THE CUSTOMER STORES BUT WITHOUT PROBLEMS APPROXIMATELY 1.2 TO WOOD PER TRADE
EACH BOX HAS 4 POSTS (OR FRAME) IN THE DEPTH, THE DEPTH OF THE SUBJECTS CAN BE ALTERED BY AN OTHER ESTABLISHMENT AND THE CONSTELLATION OF THE POST!
IN THE AREA WITH THE HIGHER PART THERE IS A GEAR DESIGN
A PROPRIETARY DESIGN IS THE STAGE THAT HAS BUILT THE CUSTOMER STILL ON IT!
TO PROTECT AGAINST UNWANTED OUT ROLL THE ROLLERS CAN BE FIXED.
FRAME HEIGHT: MIND. 10 FIELDS 2, 40 M HIGH AND 5 FIELDS ABOUT 5 M HIGH
EACH LOW FIELD, THERE ARE 4 STORAGE LEVELS = 10 X 4 = 40 LEVELS
EACH LOW FIELD, THERE ARE 4 STORAGE LEVELS = 5 X 4 = 20 LEVELS
ANOTHER MATERIAL - SO ROLLS ETC ARE MOUNTED!
POST THICKNESS OR WIDTH: 9 CM
DEPTH OF THE FIELDS: 3, 75 M
THE EMBEDDED LONG GOODS CAN BE LONGER - BACK IS TO THE WALL SPACE.
DEPTH OF STORED WOOD CURRENTLY 5, 10-6 M WOULD ALSO BE POSSIBLE
IN EACH COMPARTMENT OR BETWEEN EACH POST IS A TRUSS WITH A ROLE.
CLEAR WIDTH / COMPARTMENT WIDTH: APPROX. 1, 20 M
COMPARTMENT HEIGHT: CURRENTLY APPROX. 50 CM - THE DISTANCE CAN BE CHANGED BUT!
DISTANCE BETWEEN THE POSTS: APPROX. 1, 30 M
TIP HEIGHT. 9-10CM
WITH THE HELP OF THE CHARGING CAR EASILY CAN LARGER LOT E
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Precio: 28.000 €
Ubicación: Land-bread line kemper after major refurbishment. new tape, electrical installations, etc. photos for reference lines previously renovated and sold. we issue vat invoice in the eu. installation at an additional cost. BREAD LINE KEMPER AFTER MAJOR REFURBISHMENT. NEW TAPE, ELECTRICAL INSTALLATIONS, ETC. PHOTOS FOR REFERENCE LINES PREVIOUSLY RENOVATED AND SOLD. WE ISSUE VAT INVOICE IN THE EU. INSTALLATION AT AN ADDITIONAL COST.
Vendedor: Maszyny Piekarnicze i Cukiernicze
Año de construcción: usado
Ubicación: Land-infeed width 55 cm<br/>  open base<br/>  daylight cassette<br/>  basket<br/>  spare parts box new!<br/>  replenishment containers for developers and fixers; good INFEED WIDTH 55 CM
OPEN BASE
DAYLIGHT CASSETTE
BASKET
SPARE PARTS BOX NEW!
REPLENISHMENT CONTAINERS FOR DEVELOPERS AND FIXERS; GOOD
Vendedor: 3p Vertriebsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-infeed width 55 cm<br/>  closed base<br/>  daylight cassette<br/>  basket<br/>  replenishment containers for developers and fixers; verry good INFEED WIDTH 55 CM
CLOSED BASE
DAYLIGHT CASSETTE
BASKET
REPLENISHMENT CONTAINERS FOR DEVELOPERS AND FIXERS; VERRY GOOD
Vendedor: 3p Vertriebsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-bts-bag press<br/>  <br/>  height: 1860mm<br/>  width: 1200mm<br/>  depth: 630mm<br/>  weight: 325kg<br/>  power supply: 220-230v (single phase)<br/>  motor: 2.2kw 13 amp<br/>  compaction force: up to 3 ton<br/>  noise level: 70 decibels<br/>   <br/>  bag<br/>  height: 175mm<br/>  width: 520mm<br/>  depth: 1000mm<br/>  <br/>  features <br/>  o high compaction force ratio 10:1 <br/>  o suitable for both wet and dry kitchen waste materials <br/>  o suitable for garage forecourts, retail outlets, offices, small hospitality establishments <br/>  o top loading <br/>  o split chamber for ease of bag removal <br/>  o wheel mounted for quick and easy movement <br/>  o low operating height<br/>  o ce-certified<br/>  o made in europe<br/>  <br/>  optional extra:<br/>  o box of waste bags; ready for operation BTS-BAG PRESS

HEIGHT: 1860MM
WIDTH: 1200MM
DEPTH: 630MM
WEIGHT: 325KG
POWER SUPPLY: 220-230V (SINGLE PHASE)
MOTOR: 2.2KW 13 AMP
COMPACTION FORCE: UP TO 3 TON
NOISE LEVEL: 70 DECIBELS

BAG
HEIGHT: 175MM
WIDTH: 520MM
DEPTH: 1000MM

FEATURES
O HIGH COMPACTION FORCE RATIO 10:1
O SUITABLE FOR BOTH WET AND DRY KITCHEN WASTE MATERIALS
O SUITABLE FOR GARAGE FORECOURTS, RETAIL OUTLETS, OFFICES, SMALL HOSPITALITY ESTABLISHMENTS
O TOP LOADING
O SPLIT CHAMBER FOR EASE OF BAG REMOVAL
O WHEEL MOUNTED FOR QUICK AND EASY MOVEMENT
O LOW OPERATING HEIGHT
O CE-CERTIFIED
O MADE IN EUROPE

OPTIONAL EXTRA:
O BOX OF WASTE BAGS; READY FOR OPERATION
Vendedor: Beckmann Technik & Service KG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more types: