1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-general

project no.: 904986
number: 1 pcs.
manufacturer: chiron
type: dz 15 fx magnum high speed
control: siemens 840 d solutionline
year of constr.: 2015
state of preservation: second-hand machine
stories about: 1-2 layers

description

milling

travel in x 630 mm
travel in y 400 mm
travel in z 360 mm
maximum rapid traverse in x/y/z 75/75/75 m / min
maximum acceleration in x/y/z 0.7/1.0/1.2 g
direct measuring system x/y/z
tool holder hsk 63
maximum speed milling spindle 12000 1/min
maximum power with ed 10-40 / 100% 37/17 kw
maximum torque at ed 10-40 / 100% 180 nm
vertically arranged 2 pcs. spindle/n
spindle distance 400 mm
chain-type tool magazine 2 ã? 24 stations
max tool diameter 78 mm
max tool diameter when free neighbouring seats 140 mm
maximum tool length 300 mm
maximum tool weight 5 kg
time for tool change 0.9 s
exciting to chip time 2.4 s
swivel unit nc-controlled
2 pcs. nc-controlled rotary table
rotary table diameter 280 mm
bridge size 950 mm
hydraulic clamping

more facilities

ir workpiece measuring probes
tool measurement by means of push button
tool breakage monitoring artis
tool time monitoring with sister tool management
splash panel with fully encapsulated workspace
automatic work space door
lighting in the work area
electrostatic oil / emulsion mist extraction system
scratch band conveyors
machine is / was operated with oil
internal coolant supply
coolant gun
coolant system with paper band filter
coolant temperature control
high pressure pump 70 bar
automatic co2 fire extinguisher
interface for automatic loading using bela de portal or robot
modem for remote diagnostics and teleservice
thread cutting without compensating chuck
machine status light
automatic central oil lubrication

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 904986 NUMBER: 1 PCS. MANUFACTURER: CHIRON TYPE: DZ 15 FX MAGNUM HIGH SPEED CONTROL: SIEMENS 840 D SOLUTIONLINE YEAR OF CONSTR.: 2015 STATE OF PRESERVATION: SECOND-HAND MACHINE STORIES ABOUT: 1-2 LAYERS DESCRIPTION MILLING TRAVEL IN X 630 MM TRAVEL IN Y 400 MM TRAVEL IN Z 360 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 75/75/75 M / MIN MAXIMUM ACCELERATION IN X/Y/Z 0.7/1.0/1.2 G DIRECT MEASURING SYSTEM X/Y/Z TOOL HOLDER HSK 63 MAXIMUM SPEED MILLING SPINDLE 12000 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 37/17 KW MAXIMUM TORQUE AT ED 10-40 / 100% 180 NM VERTICALLY ARRANGED 2 PCS. SPINDLE/N SPINDLE DISTANCE 400 MM CHAIN-TYPE TOOL MAGAZINE 2 Ã? 24 STATIONS MAX TOOL DIAMETER 78 MM MAX TOOL DIAMETER WHEN FREE NEIGHBOURING SEATS 140 MM MAXIMUM TOOL LENGTH 300 MM MAXIMUM TOOL WEIGHT 5 KG TIME FOR TOOL CHANGE 0.9 S EXCITING TO CHIP TIME 2.4 S SWIVEL UNIT NC-CONTROLLED 2 PCS. NC-CONTROLLED ROTARY TABLE ROTARY TABLE DIAMETER 280 MM BRIDGE SIZE 950 MM HYDRAULIC CLAMPING MORE FACILITIES IR WORKPIECE MEASURING PROBES TOOL MEASUREMENT BY MEANS OF PUSH BUTTON TOOL BREAKAGE MONITORING ARTIS TOOL TIME MONITORING WITH SISTER TOOL MANAGEMENT SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE AUTOMATIC WORK SPACE DOOR LIGHTING IN THE WORK AREA ELECTROSTATIC OIL / EMULSION MIST EXTRACTION SYSTEM SCRATCH BAND CONVEYORS MACHINE IS / WAS OPERATED WITH OIL INTERNAL COOLANT SUPPLY COOLANT GUN COOLANT SYSTEM WITH PAPER BAND FILTER COOLANT TEMPERATURE CONTROL HIGH PRESSURE PUMP 70 BAR AUTOMATIC CO2 FIRE EXTINGUISHER INTERFACE FOR AUTOMATIC LOADING USING BELA DE PORTAL OR ROBOT MODEM FOR REMOTE DIAGNOSTICS AND TELESERVICE THREAD CUTTING WITHOUT COMPENSATING CHUCK MACHINE STATUS LIGHT AUTOMATIC CENTRAL OIL LUBRICATION COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación:
general
- partial hollow clamping device (hydraulic), - c-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, with hydraulic locking reception hsk-a63, din 69893 - y-axis ±200 mm - b-axis ±120º interpolating, torque motor - tool magazine 36-fold disc magazine, ergonomic front load - absolute, direct measuring systems in x-, y-, z1-axis - cooling pump 6 bar;20 l/min, - hinge chip conveyor - usb-interface, ethernet-interface; control: siemens ergoline without shopturn 3g
working area
swing diameter over guide ways 700 mm
turning diameter 630 mm
distance between spindles 2260 mm
clamping chuck diameter max. 500 mm
bar diameter max. 102 mm
turning-milling spindle
spindle taper hsk-63a din 69893
spindle speed -12000 rpm
drive power (100% dc) 13,2 kw
drive power (40% dc) 22 kw
torque (100% dc) 60 nm
torque (40% dc) 100 nm
locking moment 1000 nm
main drive 1
drive power (100% dc) 35 kw
drive power (40% dc) 45 kw
speed range - 4000 rpm
torque (100% dc) 600 nm
max. torque (40% dc) 770 nm
c-axis speed -4000 rpm
torque of c-axis (holding torque) 600 nm
tool magazine
number of tools 36
max. tool length 400 mm
max. tool diameter 80 mm
max. tool weight 12 kg
floor space/weight
dimensions (l x w x h) 7,61 x 4,22 x 2,67 m
weight approx. 24000 kg


excentric turning and milling operation excentric turning and milling operation (only with siemens control)
tool monitoring system artis tool break monitoring system make artis, type ctm.
chuck rinsing device, outside chuck rinsing device, outside (main spindle)
clamping with balanced pressure, main sp. balanced pressure clamping device for the main spindle
clamping with balanced pressure, sub-sp. balanced pressure clamping device for sub-spindle
hollow clamping attachment, Ø 104 mm hydraulic hollow clamping attachment dia. 104 mm (4.09 inch) pullforce 94 kn (21.132,04 lbf) at pmax 40 bar (580,151 psi) n max. = 3600 min-¹
turning/milling spindle capto c6 instead hsk -63a turn/mill spindle (standard spindle) with tool reception capto c6 (sandvik) for spindle and 36-fold tool magazine
turret 12-fold vdi 40 with tool drive star type turret, 12-fold with tool drive, reception 40 mm (1.575 inch) din 69880, radial - lower compound slide (x2/z2), ac servo drives with ball screws, absolute, direct measuring system
tailstock function for the counter spindle tailstock function for the counter spindle, mechatronic control of the supporting force, selectable per program thrust force 250-600 dan, ctx beta / ctx beta tc. thrust force 250-1200 dan, ctx gamma tc
counter spindle ism 102, c axis instead tailstock counter spindle as integrated spindle motor ism 102 - drive power 35 / 45 (46.9 / 60.9 hp) - partial hollow clamping (hydraulic) - draw tube id 104 mm (4.09 inch) - c axis and spindle brake (hydraulic) - basic slide (z3), ac servo drive with ball screw,
cooling 8/20/80 bar, 980 l, vlies, chiller compact coolant system, consisting of: - coolant tank, 980 litre/259.9 gal. - 8 bar/20 litre/min 20 bar/40 litre/min and 80 bar/11 litre/min (116 psi/5.2 gal/min and 290 psi/ 10.5 gal/min and 1160 psi/2.9 gal/min for turning/milling spindle pr
mechanical oil mist extractor 1100m³/h mechanical oil mist extractor, 1100 m³/h (38,830 ft³/h) with dirtiness indicator, class of filtration h13
tool measuring device, blum with chain magazine tool measuring device make blum for fixed and rotating tools in the turning/milling spindle in combination with chain magazine
add. mag. above tailstock/counter sp., capto c6 additional magazine above the tailstock or counter spindle (right side), 6 tool mountings with tool reception capto c6 automatically changeable with the turning/milling spindle
chain magazine for 120 tools capto c6 tool magazine, 120-fold chain magazine instead of 36-fold disc magazine, tool reception capto c6
3-jaw chuck thw plus 315-104, make schunk 3-jaw power clamping chuck with through-hole and jaw quick-change system type thw plus 315-104, make schunk, incl. connecting elements
collet chuck Ø 100, spanntop collet chuck, system spanntop, Ø100 mm (Ø3.94 in), incl. connecting elements
3-jaw chuck thw plus 315-104, make schunk 3-jaw power clamping chuck with through-hole and jaw quick-change system type thw plus 315-104, make schunk, incl. connecting elements
window rising of the security windows window cleaning of the security windows of both working area doors by compressed air (remark: the employment of coolant can limited the view on the workpiece at machining)
special equipment bar loader iemca
.gif" alt="Land-

general
- partial hollow clamping device (hydraulic), - c-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, with hydraulic locking reception hsk-a63, din 69893 - y-axis ±200 mm - b-axis ±120º interpolating, torque motor - tool magazine 36-fold disc magazine, ergonomic front load - absolute, direct measuring systems in x-, y-, z1-axis - cooling pump 6 bar;20 l/min, - hinge chip conveyor - usb-interface, ethernet-interface; control: siemens ergoline without shopturn 3g
working area
swing diameter over guide ways 700 mm
turning diameter 630 mm
distance between spindles 2260 mm
clamping chuck diameter max. 500 mm
bar diameter max. 102 mm
turning-milling spindle
spindle taper hsk-63a din 69893
spindle speed -12000 rpm
drive power (100% dc) 13,2 kw
drive power (40% dc) 22 kw
torque (100% dc) 60 nm
torque (40% dc) 100 nm
locking moment 1000 nm
main drive 1
drive power (100% dc) 35 kw
drive power (40% dc) 45 kw
speed range - 4000 rpm
torque (100% dc) 600 nm
max. torque (40% dc) 770 nm
c-axis speed -4000 rpm
torque of c-axis (holding torque) 600 nm
tool magazine
number of tools 36
max. tool length 400 mm
max. tool diameter 80 mm
max. tool weight 12 kg
floor space/weight
dimensions (l x w x h) 7,61 x 4,22 x 2,67 m
weight approx. 24000 kg


excentric turning and milling operation excentric turning and milling operation (only with siemens control)
tool monitoring system artis tool break monitoring system make artis, type ctm.
chuck rinsing device, outside chuck rinsing device, outside (main spindle)
clamping with balanced pressure, main sp. balanced pressure clamping device for the main spindle
clamping with balanced pressure, sub-sp. balanced pressure clamping device for sub-spindle
hollow clamping attachment, Ø 104 mm hydraulic hollow clamping attachment dia. 104 mm (4.09 inch) pullforce 94 kn (21.132,04 lbf) at pmax 40 bar (580,151 psi) n max. = 3600 min-¹
turning/milling spindle capto c6 instead hsk -63a turn/mill spindle (standard spindle) with tool reception capto c6 (sandvik) for spindle and 36-fold tool magazine
turret 12-fold vdi 40 with tool drive star type turret, 12-fold with tool drive, reception 40 mm (1.575 inch) din 69880, radial - lower compound slide (x2/z2), ac servo drives with ball screws, absolute, direct measuring system
tailstock function for the counter spindle tailstock function for the counter spindle, mechatronic control of the supporting force, selectable per program thrust force 250-600 dan, ctx beta / ctx beta tc. thrust force 250-1200 dan, ctx gamma tc
counter spindle ism 102, c axis instead tailstock counter spindle as integrated spindle motor ism 102 - drive power 35 / 45 (46.9 / 60.9 hp) - partial hollow clamping (hydraulic) - draw tube id 104 mm (4.09 inch) - c axis and spindle brake (hydraulic) - basic slide (z3), ac servo drive with ball screw,
cooling 8/20/80 bar, 980 l, vlies, chiller compact coolant system, consisting of: - coolant tank, 980 litre/259.9 gal. - 8 bar/20 litre/min 20 bar/40 litre/min and 80 bar/11 litre/min (116 psi/5.2 gal/min and 290 psi/ 10.5 gal/min and 1160 psi/2.9 gal/min for turning/milling spindle pr
mechanical oil mist extractor 1100m³/h mechanical oil mist extractor, 1100 m³/h (38,830 ft³/h) with dirtiness indicator, class of filtration h13
tool measuring device, blum with chain magazine tool measuring device make blum for fixed and rotating tools in the turning/milling spindle in combination with chain magazine
add. mag. above tailstock/counter sp., capto c6 additional magazine above the tailstock or counter spindle (right side), 6 tool mountings with tool reception capto c6 automatically changeable with the turning/milling spindle
chain magazine for 120 tools capto c6 tool magazine, 120-fold chain magazine instead of 36-fold disc magazine, tool reception capto c6
3-jaw chuck thw plus 315-104, make schunk 3-jaw power clamping chuck with through-hole and jaw quick-change system type thw plus 315-104, make schunk, incl. connecting elements
collet chuck Ø 100, spanntop collet chuck, system spanntop, Ø100 mm (Ø3.94 in), incl. connecting elements
3-jaw chuck thw plus 315-104, make schunk 3-jaw power clamping chuck with through-hole and jaw quick-change system type thw plus 315-104, make schunk, incl. connecting elements
window rising of the security windows window cleaning of the security windows of both working area doors by compressed air (remark: the employment of coolant can limited the view on the workpiece at machining)
special equipment bar loader iemca
" style="height: 18px;">

GENERAL
- PARTIAL HOLLOW CLAMPING DEVICE (HYDRAULIC), - C-AXIS AND SPINDLE BRAKE (HYDR.) - UPPER COMPOUND SLIDE WITH TURNING-/ MILLING SPINDLE, WITH HYDRAULIC LOCKING RECEPTION HSK-A63, DIN 69893 - Y-AXIS ±200 MM - B-AXIS ±120º INTERPOLATING, TORQUE MOTOR - TOOL MAGAZINE 36-FOLD DISC MAGAZINE, ERGONOMIC FRONT LOAD - ABSOLUTE, DIRECT MEASURING SYSTEMS IN X-, Y-, Z1-AXIS - COOLING PUMP 6 BAR;20 L/MIN, - HINGE CHIP CONVEYOR - USB-INTERFACE, ETHERNET-INTERFACE; CONTROL: SIEMENS ERGOLINE WITHOUT SHOPTURN 3G
WORKING AREA
SWING DIAMETER OVER GUIDE WAYS 700 MM
TURNING DIAMETER 630 MM
DISTANCE BETWEEN SPINDLES 2260 MM
CLAMPING CHUCK DIAMETER MAX. 500 MM
BAR DIAMETER MAX. 102 MM
TURNING-MILLING SPINDLE
SPINDLE TAPER HSK-63A DIN 69893
SPINDLE SPEED -12000 RPM
DRIVE POWER (100% DC) 13,2 KW
DRIVE POWER (40% DC) 22 KW
TORQUE (100% DC) 60 NM
TORQUE (40% DC) 100 NM
LOCKING MOMENT 1000 NM
MAIN DRIVE 1
DRIVE POWER (100% DC) 35 KW
DRIVE POWER (40% DC) 45 KW
SPEED RANGE - 4000 RPM
TORQUE (100% DC) 600 NM
MAX. TORQUE (40% DC) 770 NM
C-AXIS SPEED -4000 RPM
TORQUE OF C-AXIS (HOLDING TORQUE) 600 NM
TOOL MAGAZINE
NUMBER OF TOOLS 36
MAX. TOOL LENGTH 400 MM
MAX. TOOL DIAMETER 80 MM
MAX. TOOL WEIGHT 12 KG
FLOOR SPACE/WEIGHT
DIMENSIONS (L X W X H) 7,61 X 4,22 X 2,67 M
WEIGHT APPROX. 24000 KG


EXCENTRIC TURNING AND MILLING OPERATION EXCENTRIC TURNING AND MILLING OPERATION (ONLY WITH SIEMENS CONTROL)
TOOL MONITORING SYSTEM ARTIS TOOL BREAK MONITORING SYSTEM MAKE ARTIS, TYPE CTM.
CHUCK RINSING DEVICE, OUTSIDE CHUCK RINSING DEVICE, OUTSIDE (MAIN SPINDLE)
CLAMPING WITH BALANCED PRESSURE, MAIN SP. BALANCED PRESSURE CLAMPING DEVICE FOR THE MAIN SPINDLE
CLAMPING WITH BALANCED PRESSURE, SUB-SP. BALANCED PRESSURE CLAMPING DEVICE FOR SUB-SPINDLE
HOLLOW CLAMPING ATTACHMENT, Ø 104 MM HYDRAULIC HOLLOW CLAMPING ATTACHMENT DIA. 104 MM (4.09 INCH) PULLFORCE 94 KN (21.132,04 LBF) AT PMAX 40 BAR (580,151 PSI) N MAX. = 3600 MIN-¹
TURNING/MILLING SPINDLE CAPTO C6 INSTEAD HSK -63A TURN/MILL SPINDLE (STANDARD SPINDLE) WITH TOOL RECEPTION CAPTO C6 (SANDVIK) FOR SPINDLE AND 36-FOLD TOOL MAGAZINE
TURRET 12-FOLD VDI 40 WITH TOOL DRIVE STAR TYPE TURRET, 12-FOLD WITH TOOL DRIVE, RECEPTION 40 MM (1.575 INCH) DIN 69880, RADIAL - LOWER COMPOUND SLIDE (X2/Z2), AC SERVO DRIVES WITH BALL SCREWS, ABSOLUTE, DIRECT MEASURING SYSTEM
TAILSTOCK FUNCTION FOR THE COUNTER SPINDLE TAILSTOCK FUNCTION FOR THE COUNTER SPINDLE, MECHATRONIC CONTROL OF THE SUPPORTING FORCE, SELECTABLE PER PROGRAM THRUST FORCE 250-600 DAN, CTX BETA / CTX BETA TC. THRUST FORCE 250-1200 DAN, CTX GAMMA TC
COUNTER SPINDLE ISM 102, C AXIS INSTEAD TAILSTOCK COUNTER SPINDLE AS INTEGRATED SPINDLE MOTOR ISM 102 - DRIVE POWER 35 / 45 (46.9 / 60.9 HP) - PARTIAL HOLLOW CLAMPING (HYDRAULIC) - DRAW TUBE ID 104 MM (4.09 INCH) - C AXIS AND SPINDLE BRAKE (HYDRAULIC) - BASIC SLIDE (Z3), AC SERVO DRIVE WITH BALL SCREW,
COOLING 8/20/80 BAR, 980 L, VLIES, CHILLER COMPACT COOLANT SYSTEM, CONSISTING OF: - COOLANT TANK, 980 LITRE/259.9 GAL. - 8 BAR/20 LITRE/MIN 20 BAR/40 LITRE/MIN AND 80 BAR/11 LITRE/MIN (116 PSI/5.2 GAL/MIN AND 290 PSI/ 10.5 GAL/MIN AND 1160 PSI/2.9 GAL/MIN FOR TURNING/MILLING SPINDLE PR
MECHANICAL OIL MIST EXTRACTOR 1100M³/H MECHANICAL OIL MIST EXTRACTOR, 1100 M³/H (38,830 FT³/H) WITH DIRTINESS INDICATOR, CLASS OF FILTRATION H13
TOOL MEASURING DEVICE, BLUM WITH CHAIN MAGAZINE TOOL MEASURING DEVICE MAKE BLUM FOR FIXED AND ROTATING TOOLS IN THE TURNING/MILLING SPINDLE IN COMBINATION WITH CHAIN MAGAZINE
ADD. MAG. ABOVE TAILSTOCK/COUNTER SP., CAPTO C6 ADDITIONAL MAGAZINE ABOVE THE TAILSTOCK OR COUNTER SPINDLE (RIGHT SIDE), 6 TOOL MOUNTINGS WITH TOOL RECEPTION CAPTO C6 AUTOMATICALLY CHANGEABLE WITH THE TURNING/MILLING SPINDLE
CHAIN MAGAZINE FOR 120 TOOLS CAPTO C6 TOOL MAGAZINE, 120-FOLD CHAIN MAGAZINE INSTEAD OF 36-FOLD DISC MAGAZINE, TOOL RECEPTION CAPTO C6
3-JAW CHUCK THW PLUS 315-104, MAKE SCHUNK 3-JAW POWER CLAMPING CHUCK WITH THROUGH-HOLE AND JAW QUICK-CHANGE SYSTEM TYPE THW PLUS 315-104, MAKE SCHUNK, INCL. CONNECTING ELEMENTS
COLLET CHUCK Ø 100, SPANNTOP COLLET CHUCK, SYSTEM SPANNTOP, Ø100 MM (Ø3.94 IN), INCL. CONNECTING ELEMENTS
3-JAW CHUCK THW PLUS 315-104, MAKE SCHUNK 3-JAW POWER CLAMPING CHUCK WITH THROUGH-HOLE AND JAW QUICK-CHANGE SYSTEM TYPE THW PLUS 315-104, MAKE SCHUNK, INCL. CONNECTING ELEMENTS
WINDOW RISING OF THE SECURITY WINDOWS WINDOW CLEANING OF THE SECURITY WINDOWS OF BOTH WORKING AREA DOORS BY COMPRESSED AIR (REMARK: THE EMPLOYMENT OF COOLANT CAN LIMITED THE VIEW ON THE WORKPIECE AT MACHINING)
SPECIAL EQUIPMENT BAR LOADER IEMCA
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 904987
number: 1 pcs.
manufacturer: chiron
type: dz 15 fx magnum high speed
control: siemens 840 d solutionline
year of constr.: 2015
state of preservation: second-hand machine
stories about: 1-2 layers

description

milling

travel in x 630 mm
travel in y 400 mm
travel in z 360 mm
maximum rapid traverse in x/y/z 75/75/75 m / min
maximum acceleration in x/y/z 0.7/1.0/1.2 g
direct measuring system x/y/z
tool holder hsk 63
maximum speed milling spindle 12000 1/min
maximum power with ed 10-40 / 100% 37/17 kw
maximum torque at ed 10-40 / 100% 180 nm
vertically arranged 2 pcs. spindle/n
spindle distance 400 mm
chain-type tool magazine 2 ã? 24 stations
max tool diameter 78 mm
max tool diameter when free neighbouring seats 140 mm
maximum tool length 300 mm
maximum tool weight 5 kg
time for tool change 0.9 s
exciting to chip time 2.4 s
swivel unit nc-controlled
2 pcs. nc-controlled rotary table
rotary table diameter 280 mm
bridge size 950 mm
hydraulic clamping

more facilities

ir workpiece measuring probes
tool measurement by means of push button
tool breakage monitoring artis
tool time monitoring with sister tool management
splash panel with fully encapsulated workspace
automatic work space door
lighting in the work area
electrostatic oil / emulsion mist extraction system
scratch band conveyors
machine is / was operated with oil
internal coolant supply
coolant gun
coolant system with paper band filter
coolant temperature control
high pressure pump 70 bar
automatic co2 fire extinguisher
interface for automatic loading using bela de portal or robot
modem for remote diagnostics and teleservice
thread cutting without compensating chuck
machine status light
automatic central oil lubrication

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 904987 NUMBER: 1 PCS. MANUFACTURER: CHIRON TYPE: DZ 15 FX MAGNUM HIGH SPEED CONTROL: SIEMENS 840 D SOLUTIONLINE YEAR OF CONSTR.: 2015 STATE OF PRESERVATION: SECOND-HAND MACHINE STORIES ABOUT: 1-2 LAYERS DESCRIPTION MILLING TRAVEL IN X 630 MM TRAVEL IN Y 400 MM TRAVEL IN Z 360 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 75/75/75 M / MIN MAXIMUM ACCELERATION IN X/Y/Z 0.7/1.0/1.2 G DIRECT MEASURING SYSTEM X/Y/Z TOOL HOLDER HSK 63 MAXIMUM SPEED MILLING SPINDLE 12000 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 37/17 KW MAXIMUM TORQUE AT ED 10-40 / 100% 180 NM VERTICALLY ARRANGED 2 PCS. SPINDLE/N SPINDLE DISTANCE 400 MM CHAIN-TYPE TOOL MAGAZINE 2 Ã? 24 STATIONS MAX TOOL DIAMETER 78 MM MAX TOOL DIAMETER WHEN FREE NEIGHBOURING SEATS 140 MM MAXIMUM TOOL LENGTH 300 MM MAXIMUM TOOL WEIGHT 5 KG TIME FOR TOOL CHANGE 0.9 S EXCITING TO CHIP TIME 2.4 S SWIVEL UNIT NC-CONTROLLED 2 PCS. NC-CONTROLLED ROTARY TABLE ROTARY TABLE DIAMETER 280 MM BRIDGE SIZE 950 MM HYDRAULIC CLAMPING MORE FACILITIES IR WORKPIECE MEASURING PROBES TOOL MEASUREMENT BY MEANS OF PUSH BUTTON TOOL BREAKAGE MONITORING ARTIS TOOL TIME MONITORING WITH SISTER TOOL MANAGEMENT SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE AUTOMATIC WORK SPACE DOOR LIGHTING IN THE WORK AREA ELECTROSTATIC OIL / EMULSION MIST EXTRACTION SYSTEM SCRATCH BAND CONVEYORS MACHINE IS / WAS OPERATED WITH OIL INTERNAL COOLANT SUPPLY COOLANT GUN COOLANT SYSTEM WITH PAPER BAND FILTER COOLANT TEMPERATURE CONTROL HIGH PRESSURE PUMP 70 BAR AUTOMATIC CO2 FIRE EXTINGUISHER INTERFACE FOR AUTOMATIC LOADING USING BELA DE PORTAL OR ROBOT MODEM FOR REMOTE DIAGNOSTICS AND TELESERVICE THREAD CUTTING WITHOUT COMPENSATING CHUCK MACHINE STATUS LIGHT AUTOMATIC CENTRAL OIL LUBRICATION COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación:
general
2-axes universal turning centre with driven tools and c-axis; control: cnc control siemens sinumerik 840d sl
working area
swing diameter over guide ways 650 mm
turning diameter 315 mm
transverse stroke 267 mm
longitudinal stroke 600 mm
clamping chuck diameter max. 315 mm
main drive 1
type of main drive ac
drive power (100% dc) 12,5 kw
drive power (40% dc) 17,5 kw
speed range - 4000 rpm
torque (100% dc) 265 nm
c-axis speed -100 rpm
torque of c-axis (holding torque) 370 nm
work spindle
spindle nose flat flange
diametre of spindle nose 170h5 mm
spindle diametre on front bearing 130 mm
spindle bore 87 mm
tool holder 1
number of tool stations 12
shank diametre according to din 69880 40 mm
number of driven tools 12
speed max. 4000 rpm
floor space/weight
dimensions (l x w x h) 5,16 x 4,51 x 2,12 m
weight approx. 5800 kg


progressline & planonlight progressline & planonlight digital cycle-time graphic rest time product counter
y-axis travels +/-60mm additional y-axis - y-axis travel +/-60 mm - rapid traverse of y-axis 10 m/min - roller guideways instead of ball guideways max. turning diameter reduced to d315 mm
cooling pump, 12 bar reinforced cooling pump, 12 bar
connection for oil mist extractor connection for oil mist extractor unit dia. 200 mm, including electrical connections
tool pre-setting probe manual tool pre-setting probe
bar package ctx 450 ecoline bar package & bar interface: - part catcher, for parts up to d 75 x 200 mm (d 2.95 x 7.874 in), max. component weight 4 kg (8.8 lbs.) - interface for bar feeder or bar loading device - chip conveyor instead of chip tank - 4-colour signal lamp (bar capa
tropical package tropical package: - active cooling unit for electrical cabinet - additional ventilator for control panel recommended from 35°c to max. 50°c environmental temperature.
.gif" alt="Land-

general
2-axes universal turning centre with driven tools and c-axis; control: cnc control siemens sinumerik 840d sl
working area
swing diameter over guide ways 650 mm
turning diameter 315 mm
transverse stroke 267 mm
longitudinal stroke 600 mm
clamping chuck diameter max. 315 mm
main drive 1
type of main drive ac
drive power (100% dc) 12,5 kw
drive power (40% dc) 17,5 kw
speed range - 4000 rpm
torque (100% dc) 265 nm
c-axis speed -100 rpm
torque of c-axis (holding torque) 370 nm
work spindle
spindle nose flat flange
diametre of spindle nose 170h5 mm
spindle diametre on front bearing 130 mm
spindle bore 87 mm
tool holder 1
number of tool stations 12
shank diametre according to din 69880 40 mm
number of driven tools 12
speed max. 4000 rpm
floor space/weight
dimensions (l x w x h) 5,16 x 4,51 x 2,12 m
weight approx. 5800 kg


progressline & planonlight progressline & planonlight digital cycle-time graphic rest time product counter
y-axis travels +/-60mm additional y-axis - y-axis travel +/-60 mm - rapid traverse of y-axis 10 m/min - roller guideways instead of ball guideways max. turning diameter reduced to d315 mm
cooling pump, 12 bar reinforced cooling pump, 12 bar
connection for oil mist extractor connection for oil mist extractor unit dia. 200 mm, including electrical connections
tool pre-setting probe manual tool pre-setting probe
bar package ctx 450 ecoline bar package & bar interface: - part catcher, for parts up to d 75 x 200 mm (d 2.95 x 7.874 in), max. component weight 4 kg (8.8 lbs.) - interface for bar feeder or bar loading device - chip conveyor instead of chip tank - 4-colour signal lamp (bar capa
tropical package tropical package: - active cooling unit for electrical cabinet - additional ventilator for control panel recommended from 35°c to max. 50°c environmental temperature.
" style="height: 18px;">

GENERAL
2-AXES UNIVERSAL TURNING CENTRE WITH DRIVEN TOOLS AND C-AXIS; CONTROL: CNC CONTROL SIEMENS SINUMERIK 840D SL
WORKING AREA
SWING DIAMETER OVER GUIDE WAYS 650 MM
TURNING DIAMETER 315 MM
TRANSVERSE STROKE 267 MM
LONGITUDINAL STROKE 600 MM
CLAMPING CHUCK DIAMETER MAX. 315 MM
MAIN DRIVE 1
TYPE OF MAIN DRIVE AC
DRIVE POWER (100% DC) 12,5 KW
DRIVE POWER (40% DC) 17,5 KW
SPEED RANGE - 4000 RPM
TORQUE (100% DC) 265 NM
C-AXIS SPEED -100 RPM
TORQUE OF C-AXIS (HOLDING TORQUE) 370 NM
WORK SPINDLE
SPINDLE NOSE FLAT FLANGE
DIAMETRE OF SPINDLE NOSE 170H5 MM
SPINDLE DIAMETRE ON FRONT BEARING 130 MM
SPINDLE BORE 87 MM
TOOL HOLDER 1
NUMBER OF TOOL STATIONS 12
SHANK DIAMETRE ACCORDING TO DIN 69880 40 MM
NUMBER OF DRIVEN TOOLS 12
SPEED MAX. 4000 RPM
FLOOR SPACE/WEIGHT
DIMENSIONS (L X W X H) 5,16 X 4,51 X 2,12 M
WEIGHT APPROX. 5800 KG


PROGRESSLINE & PLANONLIGHT PROGRESSLINE & PLANONLIGHT DIGITAL CYCLE-TIME GRAPHIC REST TIME PRODUCT COUNTER
Y-AXIS TRAVELS +/-60MM ADDITIONAL Y-AXIS - Y-AXIS TRAVEL +/-60 MM - RAPID TRAVERSE OF Y-AXIS 10 M/MIN - ROLLER GUIDEWAYS INSTEAD OF BALL GUIDEWAYS MAX. TURNING DIAMETER REDUCED TO D315 MM
COOLING PUMP, 12 BAR REINFORCED COOLING PUMP, 12 BAR
CONNECTION FOR OIL MIST EXTRACTOR CONNECTION FOR OIL MIST EXTRACTOR UNIT DIA. 200 MM, INCLUDING ELECTRICAL CONNECTIONS
TOOL PRE-SETTING PROBE MANUAL TOOL PRE-SETTING PROBE
BAR PACKAGE CTX 450 ECOLINE BAR PACKAGE & BAR INTERFACE: - PART CATCHER, FOR PARTS UP TO D 75 X 200 MM (D 2.95 X 7.874 IN), MAX. COMPONENT WEIGHT 4 KG (8.8 LBS.) - INTERFACE FOR BAR FEEDER OR BAR LOADING DEVICE - CHIP CONVEYOR INSTEAD OF CHIP TANK - 4-COLOUR SIGNAL LAMP (BAR CAPA
TROPICAL PACKAGE TROPICAL PACKAGE: - ACTIVE COOLING UNIT FOR ELECTRICAL CABINET - ADDITIONAL VENTILATOR FOR CONTROL PANEL RECOMMENDED FROM 35°C TO MAX. 50°C ENVIRONMENTAL TEMPERATURE.
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 904988
number: 1 pcs.
manufacturer: chiron
type: dz 15 fx magnum high speed
control: siemens 840 d solutionline
construction year: 2014
state of preservation: second-hand machine
stories about: 1-2 layers

description

milling

travel in x 630 mm
travel in y 400 mm
travel in z 360 mm
maximum rapid traverse in x/y/z 75/75/75 m / min
maximum acceleration in x/y/z 0.7/1.0/1.2 g
direct measuring system x/y/z
tool holder hsk 63
maximum speed milling spindle 12000 1/min
maximum power with ed 10-40 / 100% 37/17 kw
maximum torque at ed 10-40 / 100% 180 nm
vertically arranged 2 pcs. spindle/n
spindle distance 400 mm
chain-type tool magazine 2 ã? 24 stations
max tool diameter 78 mm
max tool diameter when free neighbouring seats 140 mm
maximum tool length 300 mm
maximum tool weight 5 kg
time for tool change 0.9 s
exciting to chip time 2.4 s
swivel unit nc-controlled
2 pcs. nc-controlled rotary table
rotary table diameter 280 mm
bridge size 950 mm
hydraulic clamping

more facilities

ir workpiece measuring probes
tool measurement by means of push button
tool breakage monitoring artis
tool time monitoring with sister tool management
splash panel with fully encapsulated workspace
automatic work space door
lighting in the work area
electrostatic oil / emulsion mist extraction system
scratch band conveyors
machine is / was operated with oil
internal coolant supply
coolant gun
coolant system with paper band filter
coolant temperature control
high pressure pump 70 bar
automatic co2 fire extinguisher
interface for automatic loading using bela de portal or robot
modem for remote diagnostics and teleservice
thread cutting without compensating chuck
machine status light
automatic central oil lubrication

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 904988 NUMBER: 1 PCS. MANUFACTURER: CHIRON TYPE: DZ 15 FX MAGNUM HIGH SPEED CONTROL: SIEMENS 840 D SOLUTIONLINE CONSTRUCTION YEAR: 2014 STATE OF PRESERVATION: SECOND-HAND MACHINE STORIES ABOUT: 1-2 LAYERS DESCRIPTION MILLING TRAVEL IN X 630 MM TRAVEL IN Y 400 MM TRAVEL IN Z 360 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 75/75/75 M / MIN MAXIMUM ACCELERATION IN X/Y/Z 0.7/1.0/1.2 G DIRECT MEASURING SYSTEM X/Y/Z TOOL HOLDER HSK 63 MAXIMUM SPEED MILLING SPINDLE 12000 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 37/17 KW MAXIMUM TORQUE AT ED 10-40 / 100% 180 NM VERTICALLY ARRANGED 2 PCS. SPINDLE/N SPINDLE DISTANCE 400 MM CHAIN-TYPE TOOL MAGAZINE 2 Ã? 24 STATIONS MAX TOOL DIAMETER 78 MM MAX TOOL DIAMETER WHEN FREE NEIGHBOURING SEATS 140 MM MAXIMUM TOOL LENGTH 300 MM MAXIMUM TOOL WEIGHT 5 KG TIME FOR TOOL CHANGE 0.9 S EXCITING TO CHIP TIME 2.4 S SWIVEL UNIT NC-CONTROLLED 2 PCS. NC-CONTROLLED ROTARY TABLE ROTARY TABLE DIAMETER 280 MM BRIDGE SIZE 950 MM HYDRAULIC CLAMPING MORE FACILITIES IR WORKPIECE MEASURING PROBES TOOL MEASUREMENT BY MEANS OF PUSH BUTTON TOOL BREAKAGE MONITORING ARTIS TOOL TIME MONITORING WITH SISTER TOOL MANAGEMENT SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE AUTOMATIC WORK SPACE DOOR LIGHTING IN THE WORK AREA ELECTROSTATIC OIL / EMULSION MIST EXTRACTION SYSTEM SCRATCH BAND CONVEYORS MACHINE IS / WAS OPERATED WITH OIL INTERNAL COOLANT SUPPLY COOLANT GUN COOLANT SYSTEM WITH PAPER BAND FILTER COOLANT TEMPERATURE CONTROL HIGH PRESSURE PUMP 70 BAR AUTOMATIC CO2 FIRE EXTINGUISHER INTERFACE FOR AUTOMATIC LOADING USING BELA DE PORTAL OR ROBOT MODEM FOR REMOTE DIAGNOSTICS AND TELESERVICE THREAD CUTTING WITHOUT COMPENSATING CHUCK MACHINE STATUS LIGHT AUTOMATIC CENTRAL OIL LUBRICATION COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación:
general
turning-milling centre; control: siemens 840d solutionline


special equipment - chuck high/low pressure system for spindle 1 - chuck high/low pressure system for spindle 2 - tool storage capacity 40 tools (capto c6, dual contact specifications) - super-high-pressure coolant system i/f (7.0 mpa, knoll) - coolant cooling system (sepa
special equipment - in-machine workpiece measuring system optical type touch sensor (renishaw, omp60) - weekly timer - max. tool capacity 10 kg - robot i/f (with terminal block) (/1500) - chuck foot switch (double) for spindle 1, 2 - high-output spindle (spindle 1) 22/15 k
special equipment - through tool spindle air blow(dry air, lublication unit, change of rotally joint, making special circuit for air are included, switching with super high pressure coolant) - change of std pump to grundfos made pump mts20-40r38dq(4mpa) - tool spindle c
special equipment - knoll high pressure coolant unit kf110/500-2-v-7-v - schunk chuck rota ncd 215-66 for both spindles - transformer
.gif" alt="Land-

general
turning-milling centre; control: siemens 840d solutionline


special equipment - chuck high/low pressure system for spindle 1 - chuck high/low pressure system for spindle 2 - tool storage capacity 40 tools (capto c6, dual contact specifications) - super-high-pressure coolant system i/f (7.0 mpa, knoll) - coolant cooling system (sepa
special equipment - in-machine workpiece measuring system optical type touch sensor (renishaw, omp60) - weekly timer - max. tool capacity 10 kg - robot i/f (with terminal block) (/1500) - chuck foot switch (double) for spindle 1, 2 - high-output spindle (spindle 1) 22/15 k
special equipment - through tool spindle air blow(dry air, lublication unit, change of rotally joint, making special circuit for air are included, switching with super high pressure coolant) - change of std pump to grundfos made pump mts20-40r38dq(4mpa) - tool spindle c
special equipment - knoll high pressure coolant unit kf110/500-2-v-7-v - schunk chuck rota ncd 215-66 for both spindles - transformer
" style="height: 18px;">

GENERAL
TURNING-MILLING CENTRE; CONTROL: SIEMENS 840D SOLUTIONLINE


SPECIAL EQUIPMENT - CHUCK HIGH/LOW PRESSURE SYSTEM FOR SPINDLE 1 - CHUCK HIGH/LOW PRESSURE SYSTEM FOR SPINDLE 2 - TOOL STORAGE CAPACITY 40 TOOLS (CAPTO C6, DUAL CONTACT SPECIFICATIONS) - SUPER-HIGH-PRESSURE COOLANT SYSTEM I/F (7.0 MPA, KNOLL) - COOLANT COOLING SYSTEM (SEPA
SPECIAL EQUIPMENT - IN-MACHINE WORKPIECE MEASURING SYSTEM OPTICAL TYPE TOUCH SENSOR (RENISHAW, OMP60) - WEEKLY TIMER - MAX. TOOL CAPACITY 10 KG - ROBOT I/F (WITH TERMINAL BLOCK) (/1500) - CHUCK FOOT SWITCH (DOUBLE) FOR SPINDLE 1, 2 - HIGH-OUTPUT SPINDLE (SPINDLE 1) 22/15 K
SPECIAL EQUIPMENT - THROUGH TOOL SPINDLE AIR BLOW(DRY AIR, LUBLICATION UNIT, CHANGE OF ROTALLY JOINT, MAKING SPECIAL CIRCUIT FOR AIR ARE INCLUDED, SWITCHING WITH SUPER HIGH PRESSURE COOLANT) - CHANGE OF STD PUMP TO GRUNDFOS MADE PUMP MTS20-40R38DQ(4MPA) - TOOL SPINDLE C
SPECIAL EQUIPMENT - KNOLL HIGH PRESSURE COOLANT UNIT KF110/500-2-V-7-V - SCHUNK CHUCK ROTA NCD 215-66 FOR BOTH SPINDLES - TRANSFORMER
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 904998
number: 1 pcs.
manufacturer: sw (swabian machine tools)
type: ba w06-22
control: siemens 840 d
year of manufacture: 2007
state of preservation: second-hand machine
stories about: 2-3 layers

description

milling

travel in x 600 mm
travel in y (875) 600 mm
travel in z 500 mm
maximum rapid traverse in x/y/z 100/100/100 m / min
maximum acceleration in x/y/z 12/10/20 m / s2
feed force in the x/y/z 10000/10000 / 2 ã? 5000 n
direct measuring system x/y/z/a(u)/c1(c2)/w1(w2)
linear actuator x/y/z
tool holder hsk-a 63
maximum speed milling spindle 17500 1/min
maximum power with ed 10-40 / 100% 35/26 kw
maximum torque at ed 10-40 / 100% 80/60 nm
spindle diameter in front bearing 80 mm
horizontally arranged 2 pcs. spindle
spindle distance 600 mm
pneumatic tool system control
pneumatic tool taper cleaning in milling spindle
chain-type tool magazine 2 ã? 72 stations
max tool diameter 80 mm
max tool diameter when free neighbouring seats 160 mm
maximum tool length 350 mm
maximum tool weight 10 kg
rotary pallet changer 2 fold
maximum workpiece weight per pallet of 600 kg
2 stk. swivel unit for clamping bridge
swivel unit nc-controlled
4 pcs. nc-controlled rotary table (5 axis) - 2 pcs. per swivel unit
bridges measure 1430 mm
2 set clamping bridge conditions
clamping hydraulics 250 bar
6 pcs. additional clamping circuit

more facilities

ir workpiece measuring probes
tool breakage control by means of laser
splash panel with fully encapsulated workspace
automatic loading door
lighting in the work area
oil / emulsion mist extraction system
scratch band conveyors
discharge height chip conveyor 1200 mm
machine is / was operated with emulsion
internal coolant supply
coolant system with paper band filter
high pressure pump 70 bar
interface for automatic loading using bela de portal or robot
modem for remote diagnostics and teleservice
thread cutting without compensating chuck
additional control panel for managing tool
machine status light

general technical data

air supply 7 bar
operating voltage 3 x 400 / 50 v/hz
total power demand 133 kva
transport dimensions of the machine (lxwxh) approx. 3680 x 5400 x 3250 mm
floor space of throughout the facility lxwxh) approx. 4800 x 7500 x 3300 mm
machine weight 20000 kg

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 904998 NUMBER: 1 PCS. MANUFACTURER: SW (SWABIAN MACHINE TOOLS) TYPE: BA W06-22 CONTROL: SIEMENS 840 D YEAR OF MANUFACTURE: 2007 STATE OF PRESERVATION: SECOND-HAND MACHINE STORIES ABOUT: 2-3 LAYERS DESCRIPTION MILLING TRAVEL IN X 600 MM TRAVEL IN Y (875) 600 MM TRAVEL IN Z 500 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 100/100/100 M / MIN MAXIMUM ACCELERATION IN X/Y/Z 12/10/20 M / S2 FEED FORCE IN THE X/Y/Z 10000/10000 / 2 Ã? 5000 N DIRECT MEASURING SYSTEM X/Y/Z/A(U)/C1(C2)/W1(W2) LINEAR ACTUATOR X/Y/Z TOOL HOLDER HSK-A 63 MAXIMUM SPEED MILLING SPINDLE 17500 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 35/26 KW MAXIMUM TORQUE AT ED 10-40 / 100% 80/60 NM SPINDLE DIAMETER IN FRONT BEARING 80 MM HORIZONTALLY ARRANGED 2 PCS. SPINDLE SPINDLE DISTANCE 600 MM PNEUMATIC TOOL SYSTEM CONTROL PNEUMATIC TOOL TAPER CLEANING IN MILLING SPINDLE CHAIN-TYPE TOOL MAGAZINE 2 Ã? 72 STATIONS MAX TOOL DIAMETER 80 MM MAX TOOL DIAMETER WHEN FREE NEIGHBOURING SEATS 160 MM MAXIMUM TOOL LENGTH 350 MM MAXIMUM TOOL WEIGHT 10 KG ROTARY PALLET CHANGER 2 FOLD MAXIMUM WORKPIECE WEIGHT PER PALLET OF 600 KG 2 STK. SWIVEL UNIT FOR CLAMPING BRIDGE SWIVEL UNIT NC-CONTROLLED 4 PCS. NC-CONTROLLED ROTARY TABLE (5 AXIS) - 2 PCS. PER SWIVEL UNIT BRIDGES MEASURE 1430 MM 2 SET CLAMPING BRIDGE CONDITIONS CLAMPING HYDRAULICS 250 BAR 6 PCS. ADDITIONAL CLAMPING CIRCUIT MORE FACILITIES IR WORKPIECE MEASURING PROBES TOOL BREAKAGE CONTROL BY MEANS OF LASER SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE AUTOMATIC LOADING DOOR LIGHTING IN THE WORK AREA OIL / EMULSION MIST EXTRACTION SYSTEM SCRATCH BAND CONVEYORS DISCHARGE HEIGHT CHIP CONVEYOR 1200 MM MACHINE IS / WAS OPERATED WITH EMULSION INTERNAL COOLANT SUPPLY COOLANT SYSTEM WITH PAPER BAND FILTER HIGH PRESSURE PUMP 70 BAR INTERFACE FOR AUTOMATIC LOADING USING BELA DE PORTAL OR ROBOT MODEM FOR REMOTE DIAGNOSTICS AND TELESERVICE THREAD CUTTING WITHOUT COMPENSATING CHUCK ADDITIONAL CONTROL PANEL FOR MANAGING TOOL MACHINE STATUS LIGHT GENERAL TECHNICAL DATA AIR SUPPLY 7 BAR OPERATING VOLTAGE 3 X 400 / 50 V/HZ TOTAL POWER DEMAND 133 KVA TRANSPORT DIMENSIONS OF THE MACHINE (LXWXH) APPROX. 3680 X 5400 X 3250 MM FLOOR SPACE OF THROUGHOUT THE FACILITY LXWXH) APPROX. 4800 X 7500 X 3300 MM MACHINE WEIGHT 20000 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación:
general
universal milling and turning machining centre with duoblock construction; control: celos with siemens 840d sl operate
technical data
feed rate longitudinal/transverse/vertical 60000/60000/60000 mm/min
rapid traverse longitudinal/transverse/vertical 60/60/60 m/min
working area 1
longitudinal 800 mm
cross 1050 mm
vertical 850 mm
tool changer
application universal
type of magazine wheel
tool changer plane horizontal
type of gripper double gripper
number of tools 123


nc mill-turn table with pallet nc mill-turn table with pallet number of t-slots: - 1x cross slot 14 h7 / 0.55 h7 - 12x star slots 14 h11 / 0.55 h11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 800 rpm integrated balancing sensor pallet changer for 2 pallets
type of measuring system direct measuring system
table surface Ø 800 x 630 mm
centre bore 50 mm
maximum load (table centre) 1400 kg
4. axes (swivelling range) 360 x 0,001 degree
prod. package 40 bar/23 l/min coolant through spindle centre form ad 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pump
chip removal 2 worm conveyors in the machine bed convey into a cross conveyor (jointed-band conveyor) with interval control (suitable for long-chipping material). discharge height: 950 mm / 37.4 in
univ. milling head w. controlled b-axis hsk-a 100 universal milling head with controlled b-axis hsk-a 100 (only with motor spindle hsk-a 100)
motor spindle, 12,000 1/min motor spindle hsk-a 100 spindle speed 20 - 12,000 min-1 output 44 kw / 32 kw (59 hp / 43 hp) torque 288 nm / 187 nm (212 ft lbs / 137 ft lbs) (40 / 100 % duty cycle) wheel magazine hsk-a 100
taper cleaning brushes taper cleaning unit with rotating brushes for spindle taper hsk
tool magazine, wheel, 123 pockets hsk-a 100 tool magazine wheel magazine (2 wheels) with 123 tool pockets hsk-a 100
operation panel for loading station tool magazine control panel for loading station tool magazine with tft screen 15 input on softkeys / alpha-numeric keyboard on touch screen windows 7 embedded
infrared measuring probe heidenhain hsk-a 100 infrared measuring probe type heidenhain ts 649 dmg hsk-a 100
combination tool measuring in machining area combination tool measuring in machining area maker blum lasercontrol nt-h 3d laser-system for milling tools 3d touch-probe for turning tools automatic retraction of measuring device in a protective housing
3d quickset 3d quickset tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only together with option measuring probe)
sensor package i4.0 sensor package i4.0: mpc machine protection control sgs spindle growth sensor ics flow sensor
grinding package grinding package - upgrade motor spindle - grinding and dressing cycles - coolant unit 1,300 l/ 343 gal - machine protection
ecs nozzle unit incl. grinding tools ecs nozzle unit extension of the grinding package for best possible coolant supply into the grinding process incl. two grinding tools
spray pistol 3 bar - 40 l/min spray pistol 3 bar - 40 l/min 29 psi/10.4 gallon/min (theoretical pump performance)
cooling cooling by air blast through spindle centre, selection with m function
interpolation turning interpolation turning turning-recessing cycle manufacture of simple sealing surfaces and grooves using machining centres
b-axis plunging b-axis plunging cycle for plunging or retracting turning tools in / out of internal sections
alternating rotation speed alternating rotation speed process stabilisation to prevent vibrations for turning operations
multitool multitool use of turning tools with more than one blade for turning operations
application tuning cycle atc application tuning cycle atc programmable feed parameter selection for machining task: accuracy/surface/speed
netservice (celos) netservice qualified support by internet-based remote diagnostics
service agent (celos) service agent (celos) overview of all maintenance work on the machine
messenger (celos) mesenger (celos) clear live status of the networked machines
special equipment - feed drives x-/y-axis with liquid cooling - recirculating ballscrew spindle y-/z-axis with liquid cooling
special equipment thermoshield (individual measure from the accuracy package) for veneering the machine bed exhibition and showroom machines (duoblock 4) painting cover cabinet refrigerators in machine color
special equipment special cycle gearskiving / skiving for the production of spur gears for internal and external gears for straight and oblique gears includes the siemens licenses: mehrfachachspaket generic coupling off-center turning and milling new lightline with led s
special equipment esr - automatic retraction the function extended shutdown and retracting allowed in error situations to react flexibly depending on the process. in case of power failure this will be the risk for damage to the tool piece and the tool minimized: extended
special equipment the engaged one tool will be removed as soon as possible workpiece withdrawn. the withdrawal axis and the desired travel is by the customers in a manufacturer cycle are defined. it is the responsibility the customer one to retreat only if: this makes sens
.gif" alt="Land-

general
universal milling and turning machining centre with duoblock construction; control: celos with siemens 840d sl operate
technical data
feed rate longitudinal/transverse/vertical 60000/60000/60000 mm/min
rapid traverse longitudinal/transverse/vertical 60/60/60 m/min
working area 1
longitudinal 800 mm
cross 1050 mm
vertical 850 mm
tool changer
application universal
type of magazine wheel
tool changer plane horizontal
type of gripper double gripper
number of tools 123


nc mill-turn table with pallet nc mill-turn table with pallet number of t-slots: - 1x cross slot 14 h7 / 0.55 h7 - 12x star slots 14 h11 / 0.55 h11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 800 rpm integrated balancing sensor pallet changer for 2 pallets
type of measuring system direct measuring system
table surface Ø 800 x 630 mm
centre bore 50 mm
maximum load (table centre) 1400 kg
4. axes (swivelling range) 360 x 0,001 degree
prod. package 40 bar/23 l/min coolant through spindle centre form ad 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pump
chip removal 2 worm conveyors in the machine bed convey into a cross conveyor (jointed-band conveyor) with interval control (suitable for long-chipping material). discharge height: 950 mm / 37.4 in
univ. milling head w. controlled b-axis hsk-a 100 universal milling head with controlled b-axis hsk-a 100 (only with motor spindle hsk-a 100)
motor spindle, 12,000 1/min motor spindle hsk-a 100 spindle speed 20 - 12,000 min-1 output 44 kw / 32 kw (59 hp / 43 hp) torque 288 nm / 187 nm (212 ft lbs / 137 ft lbs) (40 / 100 % duty cycle) wheel magazine hsk-a 100
taper cleaning brushes taper cleaning unit with rotating brushes for spindle taper hsk
tool magazine, wheel, 123 pockets hsk-a 100 tool magazine wheel magazine (2 wheels) with 123 tool pockets hsk-a 100
operation panel for loading station tool magazine control panel for loading station tool magazine with tft screen 15 input on softkeys / alpha-numeric keyboard on touch screen windows 7 embedded
infrared measuring probe heidenhain hsk-a 100 infrared measuring probe type heidenhain ts 649 dmg hsk-a 100
combination tool measuring in machining area combination tool measuring in machining area maker blum lasercontrol nt-h 3d laser-system for milling tools 3d touch-probe for turning tools automatic retraction of measuring device in a protective housing
3d quickset 3d quickset tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only together with option measuring probe)
sensor package i4.0 sensor package i4.0: mpc machine protection control sgs spindle growth sensor ics flow sensor
grinding package grinding package - upgrade motor spindle - grinding and dressing cycles - coolant unit 1,300 l/ 343 gal - machine protection
ecs nozzle unit incl. grinding tools ecs nozzle unit extension of the grinding package for best possible coolant supply into the grinding process incl. two grinding tools
spray pistol 3 bar - 40 l/min spray pistol 3 bar - 40 l/min 29 psi/10.4 gallon/min (theoretical pump performance)
cooling cooling by air blast through spindle centre, selection with m function
interpolation turning interpolation turning turning-recessing cycle manufacture of simple sealing surfaces and grooves using machining centres
b-axis plunging b-axis plunging cycle for plunging or retracting turning tools in / out of internal sections
alternating rotation speed alternating rotation speed process stabilisation to prevent vibrations for turning operations
multitool multitool use of turning tools with more than one blade for turning operations
application tuning cycle atc application tuning cycle atc programmable feed parameter selection for machining task: accuracy/surface/speed
netservice (celos) netservice qualified support by internet-based remote diagnostics
service agent (celos) service agent (celos) overview of all maintenance work on the machine
messenger (celos) mesenger (celos) clear live status of the networked machines
special equipment - feed drives x-/y-axis with liquid cooling - recirculating ballscrew spindle y-/z-axis with liquid cooling
special equipment thermoshield (individual measure from the accuracy package) for veneering the machine bed exhibition and showroom machines (duoblock 4) painting cover cabinet refrigerators in machine color
special equipment special cycle gearskiving / skiving for the production of spur gears for internal and external gears for straight and oblique gears includes the siemens licenses: mehrfachachspaket generic coupling off-center turning and milling new lightline with led s
special equipment esr - automatic retraction the function extended shutdown and retracting allowed in error situations to react flexibly depending on the process. in case of power failure this will be the risk for damage to the tool piece and the tool minimized: extended
special equipment the engaged one tool will be removed as soon as possible workpiece withdrawn. the withdrawal axis and the desired travel is by the customers in a manufacturer cycle are defined. it is the responsibility the customer one to retreat only if: this makes sens
" style="height: 18px;">

GENERAL
UNIVERSAL MILLING AND TURNING MACHINING CENTRE WITH DUOBLOCK CONSTRUCTION; CONTROL: CELOS WITH SIEMENS 840D SL OPERATE
TECHNICAL DATA
FEED RATE LONGITUDINAL/TRANSVERSE/VERTICAL 60000/60000/60000 MM/MIN
RAPID TRAVERSE LONGITUDINAL/TRANSVERSE/VERTICAL 60/60/60 M/MIN
WORKING AREA 1
LONGITUDINAL 800 MM
CROSS 1050 MM
VERTICAL 850 MM
TOOL CHANGER
APPLICATION UNIVERSAL
TYPE OF MAGAZINE WHEEL
TOOL CHANGER PLANE HORIZONTAL
TYPE OF GRIPPER DOUBLE GRIPPER
NUMBER OF TOOLS 123


NC MILL-TURN TABLE WITH PALLET NC MILL-TURN TABLE WITH PALLET NUMBER OF T-SLOTS: - 1X CROSS SLOT 14 H7 / 0.55 H7 - 12X STAR SLOTS 14 H11 / 0.55 H11 / 22.5° MAX. TABLE SPEED MILLING OPERATION: 30 RPM TURNING OPERATION: 800 RPM INTEGRATED BALANCING SENSOR PALLET CHANGER FOR 2 PALLETS
TYPE OF MEASURING SYSTEM DIRECT MEASURING SYSTEM
TABLE SURFACE Ø 800 X 630 MM
CENTRE BORE 50 MM
MAXIMUM LOAD (TABLE CENTRE) 1400 KG
4. AXES (SWIVELLING RANGE) 360 X 0,001 DEGREE
PROD. PACKAGE 40 BAR/23 L/MIN COOLANT THROUGH SPINDLE CENTRE FORM AD 40 BAR/23 L/MIN / 580 PSI/6 GALLON/MIN (THEORETICAL PUMP PERFORMANCE) CLEAR-VIEW ROTATING WINDOW MULTI-JET UNIT AT UNIVERSAL HEAD, SWITCHABLE FROM COOLANT TO AIR (MAX. 6 BAR / 90 PSI) (6 WATER JETS, 4 AIR JETS) PUMP
CHIP REMOVAL 2 WORM CONVEYORS IN THE MACHINE BED CONVEY INTO A CROSS CONVEYOR (JOINTED-BAND CONVEYOR) WITH INTERVAL CONTROL (SUITABLE FOR LONG-CHIPPING MATERIAL). DISCHARGE HEIGHT: 950 MM / 37.4 IN
UNIV. MILLING HEAD W. CONTROLLED B-AXIS HSK-A 100 UNIVERSAL MILLING HEAD WITH CONTROLLED B-AXIS HSK-A 100 (ONLY WITH MOTOR SPINDLE HSK-A 100)
MOTOR SPINDLE, 12,000 1/MIN MOTOR SPINDLE HSK-A 100 SPINDLE SPEED 20 - 12,000 MIN-1 OUTPUT 44 KW / 32 KW (59 HP / 43 HP) TORQUE 288 NM / 187 NM (212 FT LBS / 137 FT LBS) (40 / 100 % DUTY CYCLE) WHEEL MAGAZINE HSK-A 100
TAPER CLEANING BRUSHES TAPER CLEANING UNIT WITH ROTATING BRUSHES FOR SPINDLE TAPER HSK
TOOL MAGAZINE, WHEEL, 123 POCKETS HSK-A 100 TOOL MAGAZINE WHEEL MAGAZINE (2 WHEELS) WITH 123 TOOL POCKETS HSK-A 100
OPERATION PANEL FOR LOADING STATION TOOL MAGAZINE CONTROL PANEL FOR LOADING STATION TOOL MAGAZINE WITH TFT SCREEN 15 INPUT ON SOFTKEYS / ALPHA-NUMERIC KEYBOARD ON TOUCH SCREEN WINDOWS 7 EMBEDDED
INFRARED MEASURING PROBE HEIDENHAIN HSK-A 100 INFRARED MEASURING PROBE TYPE HEIDENHAIN TS 649 DMG HSK-A 100
COMBINATION TOOL MEASURING IN MACHINING AREA COMBINATION TOOL MEASURING IN MACHINING AREA MAKER BLUM LASERCONTROL NT-H 3D LASER-SYSTEM FOR MILLING TOOLS 3D TOUCH-PROBE FOR TURNING TOOLS AUTOMATIC RETRACTION OF MEASURING DEVICE IN A PROTECTIVE HOUSING
3D QUICKSET 3D QUICKSET TOOL KIT FOR CONTROL AND COMPENSATION OF THE CINEMATIC ACCURACY OF 5 AXIS MACHINE CONFIGURATIONS (ONLY TOGETHER WITH OPTION MEASURING PROBE)
SENSOR PACKAGE I4.0 SENSOR PACKAGE I4.0: MPC MACHINE PROTECTION CONTROL SGS SPINDLE GROWTH SENSOR ICS FLOW SENSOR
GRINDING PACKAGE GRINDING PACKAGE - UPGRADE MOTOR SPINDLE - GRINDING AND DRESSING CYCLES - COOLANT UNIT 1,300 L/ 343 GAL - MACHINE PROTECTION
ECS NOZZLE UNIT INCL. GRINDING TOOLS ECS NOZZLE UNIT EXTENSION OF THE GRINDING PACKAGE FOR BEST POSSIBLE COOLANT SUPPLY INTO THE GRINDING PROCESS INCL. TWO GRINDING TOOLS
SPRAY PISTOL 3 BAR - 40 L/MIN SPRAY PISTOL 3 BAR - 40 L/MIN 29 PSI/10.4 GALLON/MIN (THEORETICAL PUMP PERFORMANCE)
COOLING COOLING BY AIR BLAST THROUGH SPINDLE CENTRE, SELECTION WITH M FUNCTION
INTERPOLATION TURNING INTERPOLATION TURNING TURNING-RECESSING CYCLE MANUFACTURE OF SIMPLE SEALING SURFACES AND GROOVES USING MACHINING CENTRES
B-AXIS PLUNGING B-AXIS PLUNGING CYCLE FOR PLUNGING OR RETRACTING TURNING TOOLS IN / OUT OF INTERNAL SECTIONS
ALTERNATING ROTATION SPEED ALTERNATING ROTATION SPEED PROCESS STABILISATION TO PREVENT VIBRATIONS FOR TURNING OPERATIONS
MULTITOOL MULTITOOL USE OF TURNING TOOLS WITH MORE THAN ONE BLADE FOR TURNING OPERATIONS
APPLICATION TUNING CYCLE ATC APPLICATION TUNING CYCLE ATC PROGRAMMABLE FEED PARAMETER SELECTION FOR MACHINING TASK: ACCURACY/SURFACE/SPEED
NETSERVICE (CELOS) NETSERVICE QUALIFIED SUPPORT BY INTERNET-BASED REMOTE DIAGNOSTICS
SERVICE AGENT (CELOS) SERVICE AGENT (CELOS) OVERVIEW OF ALL MAINTENANCE WORK ON THE MACHINE
MESSENGER (CELOS) MESENGER (CELOS) CLEAR LIVE STATUS OF THE NETWORKED MACHINES
SPECIAL EQUIPMENT - FEED DRIVES X-/Y-AXIS WITH LIQUID COOLING - RECIRCULATING BALLSCREW SPINDLE Y-/Z-AXIS WITH LIQUID COOLING
SPECIAL EQUIPMENT THERMOSHIELD (INDIVIDUAL MEASURE FROM THE ACCURACY PACKAGE) FOR VENEERING THE MACHINE BED EXHIBITION AND SHOWROOM MACHINES (DUOBLOCK 4) PAINTING COVER CABINET REFRIGERATORS IN MACHINE COLOR
SPECIAL EQUIPMENT SPECIAL CYCLE GEARSKIVING / SKIVING FOR THE PRODUCTION OF SPUR GEARS FOR INTERNAL AND EXTERNAL GEARS FOR STRAIGHT AND OBLIQUE GEARS INCLUDES THE SIEMENS LICENSES: MEHRFACHACHSPAKET GENERIC COUPLING OFF-CENTER TURNING AND MILLING NEW LIGHTLINE WITH LED S
SPECIAL EQUIPMENT ESR - AUTOMATIC RETRACTION THE FUNCTION EXTENDED SHUTDOWN AND RETRACTING ALLOWED IN ERROR SITUATIONS TO REACT FLEXIBLY DEPENDING ON THE PROCESS. IN CASE OF POWER FAILURE THIS WILL BE THE RISK FOR DAMAGE TO THE TOOL PIECE AND THE TOOL MINIMIZED: EXTENDED
SPECIAL EQUIPMENT THE ENGAGED ONE TOOL WILL BE REMOVED AS SOON AS POSSIBLE WORKPIECE WITHDRAWN. THE WITHDRAWAL AXIS AND THE DESIRED TRAVEL IS BY THE CUSTOMERS IN A MANUFACTURER CYCLE ARE DEFINED. IT IS THE RESPONSIBILITY THE CUSTOMER ONE TO RETREAT ONLY IF: THIS MAKES SENS
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 905001
number: 1 pcs.
manufacturer: gildemeister
type: ctv 250
control: siemens 840 d slimline
year of constr.: 2017
state of preservation: second-hand machine
machine a (hours): 7,600
spindle a (hours): 4,900

description

turning

axes x/y/z/c
maximum turning length 200 mm
maximum swing over bed cover 350 mm
maximum chuck diameter 250 mm
max speed main spindle 5000 1/min
maximum performance main spindle in ed 10-40 / 100% 25 kw
maximum torque of main spindle in ed 10-40 / 100% 280 nm
main spindle spindle passage 57 mm
spindle diameter in front bearing spindle 120 mm
spindle flange size main spindle 170 h 5
axes on the main spindle unit x/z/c
travel in x/y/z main spindle unit 700 /-/ 300 mm
maximum rapid traverse in x/y/z main spindle unit 60 /-/ 40 m / min
full cylinder on the main spindle
coolant through the spindle

gun down
number of stations of which powered 12/12
tool holder in the vdi 40 turret
axes in the turret y
travel in x/y/z - 90 / - mm
tool mounting plate for additional block tool holder

more facilities

workpiece measuring probes (preparation)
splash panel with fully encapsulated workspace
lighting in the work area
hinged belt chip conveyor
coolant gun
reversible double cartridge filter
high pressure pump 12 bar
rotating part memory band
machine status light

accessories

pcs. 3 - jaw chuck schunk ncd 215-66 mm

general technical data

floor space of throughout the facility lxwxh) approx. 2800 x 2770 x 2650 mm
machine weight 6200 kg

comment

left model!
we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 905001 NUMBER: 1 PCS. MANUFACTURER: GILDEMEISTER TYPE: CTV 250 CONTROL: SIEMENS 840 D SLIMLINE YEAR OF CONSTR.: 2017 STATE OF PRESERVATION: SECOND-HAND MACHINE MACHINE A (HOURS): 7,600 SPINDLE A (HOURS): 4,900 DESCRIPTION TURNING AXES X/Y/Z/C MAXIMUM TURNING LENGTH 200 MM MAXIMUM SWING OVER BED COVER 350 MM MAXIMUM CHUCK DIAMETER 250 MM MAX SPEED MAIN SPINDLE 5000 1/MIN MAXIMUM PERFORMANCE MAIN SPINDLE IN ED 10-40 / 100% 25 KW MAXIMUM TORQUE OF MAIN SPINDLE IN ED 10-40 / 100% 280 NM MAIN SPINDLE SPINDLE PASSAGE 57 MM SPINDLE DIAMETER IN FRONT BEARING SPINDLE 120 MM SPINDLE FLANGE SIZE MAIN SPINDLE 170 H 5 AXES ON THE MAIN SPINDLE UNIT X/Z/C TRAVEL IN X/Y/Z MAIN SPINDLE UNIT 700 /-/ 300 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z MAIN SPINDLE UNIT 60 /-/ 40 M / MIN FULL CYLINDER ON THE MAIN SPINDLE COOLANT THROUGH THE SPINDLE GUN DOWN NUMBER OF STATIONS OF WHICH POWERED 12/12 TOOL HOLDER IN THE VDI 40 TURRET AXES IN THE TURRET Y TRAVEL IN X/Y/Z - 90 / - MM TOOL MOUNTING PLATE FOR ADDITIONAL BLOCK TOOL HOLDER MORE FACILITIES WORKPIECE MEASURING PROBES (PREPARATION) SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA HINGED BELT CHIP CONVEYOR COOLANT GUN REVERSIBLE DOUBLE CARTRIDGE FILTER HIGH PRESSURE PUMP 12 BAR ROTATING PART MEMORY BAND MACHINE STATUS LIGHT ACCESSORIES PCS. 3 - JAW CHUCK SCHUNK NCD 215-66 MM GENERAL TECHNICAL DATA FLOOR SPACE OF THROUGHOUT THE FACILITY LXWXH) APPROX. 2800 X 2770 X 2650 MM MACHINE WEIGHT 6200 KG COMMENT LEFT MODEL! WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación:
general
universal milling and turning machining centre with duoblock construction; control: celos with siemens 840d sl operate
technical data
feed rate longitudinal/transverse/vertical 60000/60000/60000 mm/min
rapid traverse longitudinal/transverse/vertical 60/60/60 m/min
working area 1
longitudinal 800 mm
cross 1050 mm
vertical 850 mm
tool changer
application universal
type of magazine wheel
tool changer plane horizontal
type of gripper double gripper
number of tools 123


nc mill-turn table with pallet nc mill-turn table with pallet number of t-slots: - 1x cross slot 14 h7 / 0.55 h7 - 12x star slots 14 h11 / 0.55 h11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 800 rpm integrated balancing sensor pallet changer for 2 pallets
type of measuring system direct measuring system
table surface Ø 800 x 630 mm
centre bore 50 mm
maximum load (table centre) 1400 kg
4. axes (swivelling range) 360 x 0,001 degree
prod. package 40 bar/23 l/min coolant through spindle centre form ad 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pump
chip removal 2 worm conveyors in the machine bed convey into a cross conveyor (jointed-band conveyor) with interval control (suitable for long-chipping material). discharge height: 950 mm / 37.4 in
univ. milling head w. controlled b-axis hsk-a 100 universal milling head with controlled b-axis hsk-a 100 (only with motor spindle hsk-a 100)
motor spindle, 12,000 1/min motor spindle hsk-a 100 spindle speed 20 - 12,000 min-1 output 44 kw / 32 kw (59 hp / 43 hp) torque 288 nm / 187 nm (212 ft lbs / 137 ft lbs) (40 / 100 % duty cycle) wheel magazine hsk-a 100
taper cleaning brushes taper cleaning unit with rotating brushes for spindle taper hsk
tool magazine, wheel, 123 pockets hsk-a 100 tool magazine wheel magazine (2 wheels) with 123 tool pockets hsk-a 100
operation panel for loading station tool magazine control panel for loading station tool magazine with tft screen 15 input on softkeys / alpha-numeric keyboard on touch screen windows 7 embedded
infrared measuring probe renishaw hsk-a 100 infrared measuring probe type renishaw pp60 optical (omp 60) hsk-a 100
combination tool measuring in machining area combination tool measuring in machining area maker blum lasercontrol nt-h 3d laser-system for milling tools 3d touch-probe for turning tools automatic retraction of measuring device in a protective housing
tool breakage control mechanical tool breakage control mechanical version
3d quickset extension package 3d quickset extension package for each further machine: software / password (only together with option measuring probe and existing set of measuring tools)
mpc machine protection control mpc machine protection control machine protection by quick shutdown
tool identification (tds) tool identification (tool dialogue system tds) type balluff, data carrier bis c-122-04/l reading writing station at the tool magazine reading/writing manually, contactless with chip
spray pistol 3 bar - 40 l/min spray pistol 3 bar - 40 l/min 29 psi/10.4 gallon/min (theoretical pump performance)
cooling cooling by air blast through spindle centre, selection with m function
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area. release after completed check list
netservice (celos) netservice qualified support by internet-based remote diagnostics
service agent (celos) service agent (celos) overview of all maintenance work on the machine
messenger (celos) mesenger (celos) clear live status of the networked machines
special equipment machine interface for automation includes the mechanical, electrical and software preparation, consisting of: - operating modes for manual / automatic loading, over key switch switchable - the setup station doors are in the automatic mode in open
special equipment - control and connection through the suppliers of the handling system - profibus interface for coupling of the workpiece handling system to the cnc control of the machine tool interface for coupling the hardware (workroom door, protective fence,
special equipment note: to not disturb the pallet or workpiece change to minimize it is required, to cleanthe pallet or the workpiece before discharging. the cleaning is in the responsibility of the operator
special equipment communication software cnc host computer for connection to a host computer dnc operation for tnc 640 mcis rpc for siemens 840 d note: mandatory at host computer operation! checklist automation is located under documents
.gif" alt="Land-

general
universal milling and turning machining centre with duoblock construction; control: celos with siemens 840d sl operate
technical data
feed rate longitudinal/transverse/vertical 60000/60000/60000 mm/min
rapid traverse longitudinal/transverse/vertical 60/60/60 m/min
working area 1
longitudinal 800 mm
cross 1050 mm
vertical 850 mm
tool changer
application universal
type of magazine wheel
tool changer plane horizontal
type of gripper double gripper
number of tools 123


nc mill-turn table with pallet nc mill-turn table with pallet number of t-slots: - 1x cross slot 14 h7 / 0.55 h7 - 12x star slots 14 h11 / 0.55 h11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 800 rpm integrated balancing sensor pallet changer for 2 pallets
type of measuring system direct measuring system
table surface Ø 800 x 630 mm
centre bore 50 mm
maximum load (table centre) 1400 kg
4. axes (swivelling range) 360 x 0,001 degree
prod. package 40 bar/23 l/min coolant through spindle centre form ad 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pump
chip removal 2 worm conveyors in the machine bed convey into a cross conveyor (jointed-band conveyor) with interval control (suitable for long-chipping material). discharge height: 950 mm / 37.4 in
univ. milling head w. controlled b-axis hsk-a 100 universal milling head with controlled b-axis hsk-a 100 (only with motor spindle hsk-a 100)
motor spindle, 12,000 1/min motor spindle hsk-a 100 spindle speed 20 - 12,000 min-1 output 44 kw / 32 kw (59 hp / 43 hp) torque 288 nm / 187 nm (212 ft lbs / 137 ft lbs) (40 / 100 % duty cycle) wheel magazine hsk-a 100
taper cleaning brushes taper cleaning unit with rotating brushes for spindle taper hsk
tool magazine, wheel, 123 pockets hsk-a 100 tool magazine wheel magazine (2 wheels) with 123 tool pockets hsk-a 100
operation panel for loading station tool magazine control panel for loading station tool magazine with tft screen 15 input on softkeys / alpha-numeric keyboard on touch screen windows 7 embedded
infrared measuring probe renishaw hsk-a 100 infrared measuring probe type renishaw pp60 optical (omp 60) hsk-a 100
combination tool measuring in machining area combination tool measuring in machining area maker blum lasercontrol nt-h 3d laser-system for milling tools 3d touch-probe for turning tools automatic retraction of measuring device in a protective housing
tool breakage control mechanical tool breakage control mechanical version
3d quickset extension package 3d quickset extension package for each further machine: software / password (only together with option measuring probe and existing set of measuring tools)
mpc machine protection control mpc machine protection control machine protection by quick shutdown
tool identification (tds) tool identification (tool dialogue system tds) type balluff, data carrier bis c-122-04/l reading writing station at the tool magazine reading/writing manually, contactless with chip
spray pistol 3 bar - 40 l/min spray pistol 3 bar - 40 l/min 29 psi/10.4 gallon/min (theoretical pump performance)
cooling cooling by air blast through spindle centre, selection with m function
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area. release after completed check list
netservice (celos) netservice qualified support by internet-based remote diagnostics
service agent (celos) service agent (celos) overview of all maintenance work on the machine
messenger (celos) mesenger (celos) clear live status of the networked machines
special equipment machine interface for automation includes the mechanical, electrical and software preparation, consisting of: - operating modes for manual / automatic loading, over key switch switchable - the setup station doors are in the automatic mode in open
special equipment - control and connection through the suppliers of the handling system - profibus interface for coupling of the workpiece handling system to the cnc control of the machine tool interface for coupling the hardware (workroom door, protective fence,
special equipment note: to not disturb the pallet or workpiece change to minimize it is required, to cleanthe pallet or the workpiece before discharging. the cleaning is in the responsibility of the operator
special equipment communication software cnc host computer for connection to a host computer dnc operation for tnc 640 mcis rpc for siemens 840 d note: mandatory at host computer operation! checklist automation is located under documents
" style="height: 18px;">

GENERAL
UNIVERSAL MILLING AND TURNING MACHINING CENTRE WITH DUOBLOCK CONSTRUCTION; CONTROL: CELOS WITH SIEMENS 840D SL OPERATE
TECHNICAL DATA
FEED RATE LONGITUDINAL/TRANSVERSE/VERTICAL 60000/60000/60000 MM/MIN
RAPID TRAVERSE LONGITUDINAL/TRANSVERSE/VERTICAL 60/60/60 M/MIN
WORKING AREA 1
LONGITUDINAL 800 MM
CROSS 1050 MM
VERTICAL 850 MM
TOOL CHANGER
APPLICATION UNIVERSAL
TYPE OF MAGAZINE WHEEL
TOOL CHANGER PLANE HORIZONTAL
TYPE OF GRIPPER DOUBLE GRIPPER
NUMBER OF TOOLS 123


NC MILL-TURN TABLE WITH PALLET NC MILL-TURN TABLE WITH PALLET NUMBER OF T-SLOTS: - 1X CROSS SLOT 14 H7 / 0.55 H7 - 12X STAR SLOTS 14 H11 / 0.55 H11 / 22.5° MAX. TABLE SPEED MILLING OPERATION: 30 RPM TURNING OPERATION: 800 RPM INTEGRATED BALANCING SENSOR PALLET CHANGER FOR 2 PALLETS
TYPE OF MEASURING SYSTEM DIRECT MEASURING SYSTEM
TABLE SURFACE Ø 800 X 630 MM
CENTRE BORE 50 MM
MAXIMUM LOAD (TABLE CENTRE) 1400 KG
4. AXES (SWIVELLING RANGE) 360 X 0,001 DEGREE
PROD. PACKAGE 40 BAR/23 L/MIN COOLANT THROUGH SPINDLE CENTRE FORM AD 40 BAR/23 L/MIN / 580 PSI/6 GALLON/MIN (THEORETICAL PUMP PERFORMANCE) CLEAR-VIEW ROTATING WINDOW MULTI-JET UNIT AT UNIVERSAL HEAD, SWITCHABLE FROM COOLANT TO AIR (MAX. 6 BAR / 90 PSI) (6 WATER JETS, 4 AIR JETS) PUMP
CHIP REMOVAL 2 WORM CONVEYORS IN THE MACHINE BED CONVEY INTO A CROSS CONVEYOR (JOINTED-BAND CONVEYOR) WITH INTERVAL CONTROL (SUITABLE FOR LONG-CHIPPING MATERIAL). DISCHARGE HEIGHT: 950 MM / 37.4 IN
UNIV. MILLING HEAD W. CONTROLLED B-AXIS HSK-A 100 UNIVERSAL MILLING HEAD WITH CONTROLLED B-AXIS HSK-A 100 (ONLY WITH MOTOR SPINDLE HSK-A 100)
MOTOR SPINDLE, 12,000 1/MIN MOTOR SPINDLE HSK-A 100 SPINDLE SPEED 20 - 12,000 MIN-1 OUTPUT 44 KW / 32 KW (59 HP / 43 HP) TORQUE 288 NM / 187 NM (212 FT LBS / 137 FT LBS) (40 / 100 % DUTY CYCLE) WHEEL MAGAZINE HSK-A 100
TAPER CLEANING BRUSHES TAPER CLEANING UNIT WITH ROTATING BRUSHES FOR SPINDLE TAPER HSK
TOOL MAGAZINE, WHEEL, 123 POCKETS HSK-A 100 TOOL MAGAZINE WHEEL MAGAZINE (2 WHEELS) WITH 123 TOOL POCKETS HSK-A 100
OPERATION PANEL FOR LOADING STATION TOOL MAGAZINE CONTROL PANEL FOR LOADING STATION TOOL MAGAZINE WITH TFT SCREEN 15 INPUT ON SOFTKEYS / ALPHA-NUMERIC KEYBOARD ON TOUCH SCREEN WINDOWS 7 EMBEDDED
INFRARED MEASURING PROBE RENISHAW HSK-A 100 INFRARED MEASURING PROBE TYPE RENISHAW PP60 OPTICAL (OMP 60) HSK-A 100
COMBINATION TOOL MEASURING IN MACHINING AREA COMBINATION TOOL MEASURING IN MACHINING AREA MAKER BLUM LASERCONTROL NT-H 3D LASER-SYSTEM FOR MILLING TOOLS 3D TOUCH-PROBE FOR TURNING TOOLS AUTOMATIC RETRACTION OF MEASURING DEVICE IN A PROTECTIVE HOUSING
TOOL BREAKAGE CONTROL MECHANICAL TOOL BREAKAGE CONTROL MECHANICAL VERSION
3D QUICKSET EXTENSION PACKAGE 3D QUICKSET EXTENSION PACKAGE FOR EACH FURTHER MACHINE: SOFTWARE / PASSWORD (ONLY TOGETHER WITH OPTION MEASURING PROBE AND EXISTING SET OF MEASURING TOOLS)
MPC MACHINE PROTECTION CONTROL MPC MACHINE PROTECTION CONTROL MACHINE PROTECTION BY QUICK SHUTDOWN
TOOL IDENTIFICATION (TDS) TOOL IDENTIFICATION (TOOL DIALOGUE SYSTEM TDS) TYPE BALLUFF, DATA CARRIER BIS C-122-04/L READING WRITING STATION AT THE TOOL MAGAZINE READING/WRITING MANUALLY, CONTACTLESS WITH CHIP
SPRAY PISTOL 3 BAR - 40 L/MIN SPRAY PISTOL 3 BAR - 40 L/MIN 29 PSI/10.4 GALLON/MIN (THEORETICAL PUMP PERFORMANCE)
COOLING COOLING BY AIR BLAST THROUGH SPINDLE CENTRE, SELECTION WITH M FUNCTION
OPERATION MODE 4 OPERATION MODE 4 PROCESS MONITORING IN THE PRODUCTION MANUAL INTERVENTION WITH OPEN DOORS OF MACHINING AREA. RELEASE AFTER COMPLETED CHECK LIST
NETSERVICE (CELOS) NETSERVICE QUALIFIED SUPPORT BY INTERNET-BASED REMOTE DIAGNOSTICS
SERVICE AGENT (CELOS) SERVICE AGENT (CELOS) OVERVIEW OF ALL MAINTENANCE WORK ON THE MACHINE
MESSENGER (CELOS) MESENGER (CELOS) CLEAR LIVE STATUS OF THE NETWORKED MACHINES
SPECIAL EQUIPMENT MACHINE INTERFACE FOR AUTOMATION INCLUDES THE MECHANICAL, ELECTRICAL AND SOFTWARE PREPARATION, CONSISTING OF: - OPERATING MODES FOR MANUAL / AUTOMATIC LOADING, OVER KEY SWITCH SWITCHABLE - THE SETUP STATION DOORS ARE IN THE AUTOMATIC MODE IN OPEN
SPECIAL EQUIPMENT - CONTROL AND CONNECTION THROUGH THE SUPPLIERS OF THE HANDLING SYSTEM - PROFIBUS INTERFACE FOR COUPLING OF THE WORKPIECE HANDLING SYSTEM TO THE CNC CONTROL OF THE MACHINE TOOL INTERFACE FOR COUPLING THE HARDWARE (WORKROOM DOOR, PROTECTIVE FENCE,
SPECIAL EQUIPMENT NOTE: TO NOT DISTURB THE PALLET OR WORKPIECE CHANGE TO MINIMIZE IT IS REQUIRED, TO CLEANTHE PALLET OR THE WORKPIECE BEFORE DISCHARGING. THE CLEANING IS IN THE RESPONSIBILITY OF THE OPERATOR
SPECIAL EQUIPMENT COMMUNICATION SOFTWARE CNC HOST COMPUTER FOR CONNECTION TO A HOST COMPUTER DNC OPERATION FOR TNC 640 MCIS RPC FOR SIEMENS 840 D NOTE: MANDATORY AT HOST COMPUTER OPERATION! CHECKLIST AUTOMATION IS LOCATED UNDER DOCUMENTS
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 905002
number: 1 pcs.
manufacturer: gildemeister
type: ctv 250
control: siemens 840 d slimline
year of constr.: 2017
state of preservation: second-hand machine
machine a (hours): 6,300
spindle a (hours): 4,400

description

turning

axes x/z/c
maximum turning length 200 mm
maximum swing over bed cover 350 mm
maximum chuck diameter 250 mm
max speed main spindle 5000 1/min
maximum performance main spindle in ed 10-40 / 100% 25 kw
maximum torque of main spindle in ed 10-40 / 100% 280 nm
main spindle spindle passage 57 mm
spindle diameter in front bearing spindle 120 mm
spindle flange size main spindle 170 h 5
axes on the main spindle unit x/z/c
travel in x/y/z main spindle unit 700 /-/ 300 mm
maximum rapid traverse in x/y/z main spindle unit 60 /-/ 40 m / min
full cylinder on the main spindle
coolant through the spindle
pneumatic work piece control

gun down
number of stations of which powered 12/12
tool holder in the vdi 40 turret
tool mounting plate for additional block tool holder

more facilities

splash panel with fully encapsulated workspace
lighting in the work area
hinged belt chip conveyor
coolant gun
reversible double cartridge filter
high pressure pump 12 bar
rotating part memory band
interface for automatic loading using bela de portal or robot
machine status light

accessories

pcs. 3 - jaw chuck schunk ncd 215-66 mm

general technical data

floor space of throughout the facility lxwxh) approx. 2800 x 2770 x 2650 mm
machine weight 6200 kg

comment

right model!
we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 905002 NUMBER: 1 PCS. MANUFACTURER: GILDEMEISTER TYPE: CTV 250 CONTROL: SIEMENS 840 D SLIMLINE YEAR OF CONSTR.: 2017 STATE OF PRESERVATION: SECOND-HAND MACHINE MACHINE A (HOURS): 6,300 SPINDLE A (HOURS): 4,400 DESCRIPTION TURNING AXES X/Z/C MAXIMUM TURNING LENGTH 200 MM MAXIMUM SWING OVER BED COVER 350 MM MAXIMUM CHUCK DIAMETER 250 MM MAX SPEED MAIN SPINDLE 5000 1/MIN MAXIMUM PERFORMANCE MAIN SPINDLE IN ED 10-40 / 100% 25 KW MAXIMUM TORQUE OF MAIN SPINDLE IN ED 10-40 / 100% 280 NM MAIN SPINDLE SPINDLE PASSAGE 57 MM SPINDLE DIAMETER IN FRONT BEARING SPINDLE 120 MM SPINDLE FLANGE SIZE MAIN SPINDLE 170 H 5 AXES ON THE MAIN SPINDLE UNIT X/Z/C TRAVEL IN X/Y/Z MAIN SPINDLE UNIT 700 /-/ 300 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z MAIN SPINDLE UNIT 60 /-/ 40 M / MIN FULL CYLINDER ON THE MAIN SPINDLE COOLANT THROUGH THE SPINDLE PNEUMATIC WORK PIECE CONTROL GUN DOWN NUMBER OF STATIONS OF WHICH POWERED 12/12 TOOL HOLDER IN THE VDI 40 TURRET TOOL MOUNTING PLATE FOR ADDITIONAL BLOCK TOOL HOLDER MORE FACILITIES SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA HINGED BELT CHIP CONVEYOR COOLANT GUN REVERSIBLE DOUBLE CARTRIDGE FILTER HIGH PRESSURE PUMP 12 BAR ROTATING PART MEMORY BAND INTERFACE FOR AUTOMATIC LOADING USING BELA DE PORTAL OR ROBOT MACHINE STATUS LIGHT ACCESSORIES PCS. 3 - JAW CHUCK SCHUNK NCD 215-66 MM GENERAL TECHNICAL DATA FLOOR SPACE OF THROUGHOUT THE FACILITY LXWXH) APPROX. 2800 X 2770 X 2650 MM MACHINE WEIGHT 6200 KG COMMENT RIGHT MODEL! WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación:
general
highly productive compact machining centres; control: siemens 840d solutionline
technical data
feed rate longitudinal/transverse/vertical 1-60000/1-60000/1-60000 mm/min
rapid traverse longitudinal/transverse/vertical 60/60/60 m/min
miscellaneous
clamping system mas 403 - 45°
working area 1
longitudinal 700 mm
cross 420 mm
vertical 380 mm
floor space/weight
dimensions (l x w x h) 1,65 x 2,34 x 2,5 (1,65 x 2,95 x 2,55) m
weight approx. 4100 kg


spindle speed up to 24,000 r.p.m. bt30 spindle 24,000rpm with tool taper bt30 jis b 6339 (mas 403-45°) ac-motor 20 / 4 kw (max. / 100% ed) watercooling spindle and spindle motor via heat exchanger (fan)
table table surface 840 x 420 mm
maximum load (table centre) 300 kg
slot width 14 mm
number of slots 2
clamping grid m 12, 100 x 100 mm
tool magazine 25 places tool magazine 25 places (suitable for inclusion in the tool spindle) chip-to-chip time 1.7 sec
oil and emulsion mist separator oil- and emulsion mist separator mechanical (including cabin roof)
renishaw touch probe-kit for milltap 700 renishaw measuring-kit for milltap 700 suitable to tool taper system in spindle omp40-2 touch probe with optical signal transmission ots wireless probe with air purge on machine table omi-2t optical transmission module plastic carrying case calibration to
swarf removal package paper band filter 40bar ics swarf removal package bandfilter ics 40bar contents: paper band filter 40bar/ 23l/min/ 600l tank swarf conveyor scraper drag type with integrated flat bed sheet discharge height 600mm; tank volume 200l cabin roof; machine height 2580mm coolant- / air
automation interface door right automation interface inclusive automation door right and pre- paration hydraulic interface
software package job shop and sinumerik mdynamics software package job shop and sinumerik mdynamics data memory extention 2gb-flashcard shop mill, extensive interactive programming solutions measuring cycles 3-d work piece presentation high speed 3-d processing and advanced surface transmit cylinder int
air blast through spindle center only with ics air blast through spindle center via m-command; maintained air with small oil portion due to needed lead through in main spindle only with swarf removal package ics possible!
spray gun for swarf removal spray gun for swarf removal (only together with chip removal packages)
special equipment media supply to the table of milltap700 hydraulic clamping 3o - 24o bar, 1 circle adaptation of the machine to control and monitoring the vacuum voltage and change the clamping hydraulics: processing with retracted stops (tension line without pressure)
.gif" alt="Land-

general
highly productive compact machining centres; control: siemens 840d solutionline
technical data
feed rate longitudinal/transverse/vertical 1-60000/1-60000/1-60000 mm/min
rapid traverse longitudinal/transverse/vertical 60/60/60 m/min
miscellaneous
clamping system mas 403 - 45°
working area 1
longitudinal 700 mm
cross 420 mm
vertical 380 mm
floor space/weight
dimensions (l x w x h) 1,65 x 2,34 x 2,5 (1,65 x 2,95 x 2,55) m
weight approx. 4100 kg


spindle speed up to 24,000 r.p.m. bt30 spindle 24,000rpm with tool taper bt30 jis b 6339 (mas 403-45°) ac-motor 20 / 4 kw (max. / 100% ed) watercooling spindle and spindle motor via heat exchanger (fan)
table table surface 840 x 420 mm
maximum load (table centre) 300 kg
slot width 14 mm
number of slots 2
clamping grid m 12, 100 x 100 mm
tool magazine 25 places tool magazine 25 places (suitable for inclusion in the tool spindle) chip-to-chip time 1.7 sec
oil and emulsion mist separator oil- and emulsion mist separator mechanical (including cabin roof)
renishaw touch probe-kit for milltap 700 renishaw measuring-kit for milltap 700 suitable to tool taper system in spindle omp40-2 touch probe with optical signal transmission ots wireless probe with air purge on machine table omi-2t optical transmission module plastic carrying case calibration to
swarf removal package paper band filter 40bar ics swarf removal package bandfilter ics 40bar contents: paper band filter 40bar/ 23l/min/ 600l tank swarf conveyor scraper drag type with integrated flat bed sheet discharge height 600mm; tank volume 200l cabin roof; machine height 2580mm coolant- / air
automation interface door right automation interface inclusive automation door right and pre- paration hydraulic interface
software package job shop and sinumerik mdynamics software package job shop and sinumerik mdynamics data memory extention 2gb-flashcard shop mill, extensive interactive programming solutions measuring cycles 3-d work piece presentation high speed 3-d processing and advanced surface transmit cylinder int
air blast through spindle center only with ics air blast through spindle center via m-command; maintained air with small oil portion due to needed lead through in main spindle only with swarf removal package ics possible!
spray gun for swarf removal spray gun for swarf removal (only together with chip removal packages)
special equipment media supply to the table of milltap700 hydraulic clamping 3o - 24o bar, 1 circle adaptation of the machine to control and monitoring the vacuum voltage and change the clamping hydraulics: processing with retracted stops (tension line without pressure)
" style="height: 18px;">

GENERAL
HIGHLY PRODUCTIVE COMPACT MACHINING CENTRES; CONTROL: SIEMENS 840D SOLUTIONLINE
TECHNICAL DATA
FEED RATE LONGITUDINAL/TRANSVERSE/VERTICAL 1-60000/1-60000/1-60000 MM/MIN
RAPID TRAVERSE LONGITUDINAL/TRANSVERSE/VERTICAL 60/60/60 M/MIN
MISCELLANEOUS
CLAMPING SYSTEM MAS 403 - 45°
WORKING AREA 1
LONGITUDINAL 700 MM
CROSS 420 MM
VERTICAL 380 MM
FLOOR SPACE/WEIGHT
DIMENSIONS (L X W X H) 1,65 X 2,34 X 2,5 (1,65 X 2,95 X 2,55) M
WEIGHT APPROX. 4100 KG


SPINDLE SPEED UP TO 24,000 R.P.M. BT30 SPINDLE 24,000RPM WITH TOOL TAPER BT30 JIS B 6339 (MAS 403-45°) AC-MOTOR 20 / 4 KW (MAX. / 100% ED) WATERCOOLING SPINDLE AND SPINDLE MOTOR VIA HEAT EXCHANGER (FAN)
TABLE TABLE SURFACE 840 X 420 MM
MAXIMUM LOAD (TABLE CENTRE) 300 KG
SLOT WIDTH 14 MM
NUMBER OF SLOTS 2
CLAMPING GRID M 12, 100 X 100 MM
TOOL MAGAZINE 25 PLACES TOOL MAGAZINE 25 PLACES (SUITABLE FOR INCLUSION IN THE TOOL SPINDLE) CHIP-TO-CHIP TIME 1.7 SEC
OIL AND EMULSION MIST SEPARATOR OIL- AND EMULSION MIST SEPARATOR MECHANICAL (INCLUDING CABIN ROOF)
RENISHAW TOUCH PROBE-KIT FOR MILLTAP 700 RENISHAW MEASURING-KIT FOR MILLTAP 700 SUITABLE TO TOOL TAPER SYSTEM IN SPINDLE OMP40-2 TOUCH PROBE WITH OPTICAL SIGNAL TRANSMISSION OTS WIRELESS PROBE WITH AIR PURGE ON MACHINE TABLE OMI-2T OPTICAL TRANSMISSION MODULE PLASTIC CARRYING CASE CALIBRATION TO
SWARF REMOVAL PACKAGE PAPER BAND FILTER 40BAR ICS SWARF REMOVAL PACKAGE BANDFILTER ICS 40BAR CONTENTS: PAPER BAND FILTER 40BAR/ 23L/MIN/ 600L TANK SWARF CONVEYOR SCRAPER DRAG TYPE WITH INTEGRATED FLAT BED SHEET DISCHARGE HEIGHT 600MM; TANK VOLUME 200L CABIN ROOF; MACHINE HEIGHT 2580MM COOLANT- / AIR
AUTOMATION INTERFACE DOOR RIGHT AUTOMATION INTERFACE INCLUSIVE AUTOMATION DOOR RIGHT AND PRE- PARATION HYDRAULIC INTERFACE
SOFTWARE PACKAGE JOB SHOP AND SINUMERIK MDYNAMICS SOFTWARE PACKAGE JOB SHOP AND SINUMERIK MDYNAMICS DATA MEMORY EXTENTION 2GB-FLASHCARD SHOP MILL, EXTENSIVE INTERACTIVE PROGRAMMING SOLUTIONS MEASURING CYCLES 3-D WORK PIECE PRESENTATION HIGH SPEED 3-D PROCESSING AND ADVANCED SURFACE TRANSMIT CYLINDER INT
AIR BLAST THROUGH SPINDLE CENTER ONLY WITH ICS AIR BLAST THROUGH SPINDLE CENTER VIA M-COMMAND; MAINTAINED AIR WITH SMALL OIL PORTION DUE TO NEEDED LEAD THROUGH IN MAIN SPINDLE ONLY WITH SWARF REMOVAL PACKAGE ICS POSSIBLE!
SPRAY GUN FOR SWARF REMOVAL SPRAY GUN FOR SWARF REMOVAL (ONLY TOGETHER WITH CHIP REMOVAL PACKAGES)
SPECIAL EQUIPMENT MEDIA SUPPLY TO THE TABLE OF MILLTAP700 HYDRAULIC CLAMPING 3O - 24O BAR, 1 CIRCLE ADAPTATION OF THE MACHINE TO CONTROL AND MONITORING THE VACUUM VOLTAGE AND CHANGE THE CLAMPING HYDRAULICS: PROCESSING WITH RETRACTED STOPS (TENSION LINE WITHOUT PRESSURE)
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 905003
number: 1 pcs.
manufacturer: sw (swabian machine tools)
type: ba w06-22
control: siemens 840 d
year of construction: 2010
state of preservation: second-hand machine
stories about: 2-3 layers

description

milling

travel in x 600 mm
travel in y (875) 600 mm
travel in z 500 mm
maximum rapid traverse in x/y/z 100/100/100 m / min
maximum acceleration in x/y/z 12/10/20 m / s2
feed force in the x/y/z 10000/10000 / 2 ã? 5000 n
direct measuring system x/y/z/a(u)/c1(c2)/w1(w2)
linear actuator x/y/z
tool holder hsk-a 63
maximum speed milling spindle 17500 1/min
maximum power with ed 10-40 / 100% 35/26 kw
maximum torque at ed 10-40 / 100% 80/60 nm
spindle diameter in front bearing 80 mm
horizontally arranged 2 pcs. spindle
spindle distance 600 mm
pneumatic tool system control
pneumatic tool taper cleaning in milling spindle
chain-type tool magazine 2 ã? 36 stations
max tool diameter 80 mm
max tool diameter when free neighbouring seats 160 mm
maximum tool length 350 mm
maximum tool weight 10 kg
rotary pallet changer 2 fold
maximum workpiece weight per pallet of 600 kg
2 stk. swivel unit for clamping bridge
swivel unit nc-controlled
4 pcs. nc-controlled rotary table (5 axis) - 2 pcs. per swivel unit
bridges measure 1430 mm
2 set clamping bridge conditions
clamping hydraulics 250 bar
6 pcs. additional clamping circuit

more facilities

ir workpiece measuring probes
tool breakage control by means of laser
splash panel with fully encapsulated workspace
automatic loading door
lighting in the work area
oil / emulsion mist extraction system
scratch band conveyors
discharge height chip conveyor 1200 mm
machine is / was operated with emulsion
internal coolant supply
coolant system with paper band filter
high pressure pump 70 bar
interface for automatic loading using bela de portal or robot
modem for remote diagnostics and teleservice
thread cutting without compensating chuck
machine status light

general technical data

air supply 7 bar
operating voltage 3 x 400 / 50 v/hz
total power demand 133 kva
transport dimensions of the machine (lxwxh) approx. 3680 x 5400 x 3250 mm
floor space of throughout the facility lxwxh) approx. 4800 x 7500 x 3300 mm
machine weight 20000 kg

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 905003 NUMBER: 1 PCS. MANUFACTURER: SW (SWABIAN MACHINE TOOLS) TYPE: BA W06-22 CONTROL: SIEMENS 840 D YEAR OF CONSTRUCTION: 2010 STATE OF PRESERVATION: SECOND-HAND MACHINE STORIES ABOUT: 2-3 LAYERS DESCRIPTION MILLING TRAVEL IN X 600 MM TRAVEL IN Y (875) 600 MM TRAVEL IN Z 500 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 100/100/100 M / MIN MAXIMUM ACCELERATION IN X/Y/Z 12/10/20 M / S2 FEED FORCE IN THE X/Y/Z 10000/10000 / 2 Ã? 5000 N DIRECT MEASURING SYSTEM X/Y/Z/A(U)/C1(C2)/W1(W2) LINEAR ACTUATOR X/Y/Z TOOL HOLDER HSK-A 63 MAXIMUM SPEED MILLING SPINDLE 17500 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 35/26 KW MAXIMUM TORQUE AT ED 10-40 / 100% 80/60 NM SPINDLE DIAMETER IN FRONT BEARING 80 MM HORIZONTALLY ARRANGED 2 PCS. SPINDLE SPINDLE DISTANCE 600 MM PNEUMATIC TOOL SYSTEM CONTROL PNEUMATIC TOOL TAPER CLEANING IN MILLING SPINDLE CHAIN-TYPE TOOL MAGAZINE 2 Ã? 36 STATIONS MAX TOOL DIAMETER 80 MM MAX TOOL DIAMETER WHEN FREE NEIGHBOURING SEATS 160 MM MAXIMUM TOOL LENGTH 350 MM MAXIMUM TOOL WEIGHT 10 KG ROTARY PALLET CHANGER 2 FOLD MAXIMUM WORKPIECE WEIGHT PER PALLET OF 600 KG 2 STK. SWIVEL UNIT FOR CLAMPING BRIDGE SWIVEL UNIT NC-CONTROLLED 4 PCS. NC-CONTROLLED ROTARY TABLE (5 AXIS) - 2 PCS. PER SWIVEL UNIT BRIDGES MEASURE 1430 MM 2 SET CLAMPING BRIDGE CONDITIONS CLAMPING HYDRAULICS 250 BAR 6 PCS. ADDITIONAL CLAMPING CIRCUIT MORE FACILITIES IR WORKPIECE MEASURING PROBES TOOL BREAKAGE CONTROL BY MEANS OF LASER SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE AUTOMATIC LOADING DOOR LIGHTING IN THE WORK AREA OIL / EMULSION MIST EXTRACTION SYSTEM SCRATCH BAND CONVEYORS DISCHARGE HEIGHT CHIP CONVEYOR 1200 MM MACHINE IS / WAS OPERATED WITH EMULSION INTERNAL COOLANT SUPPLY COOLANT SYSTEM WITH PAPER BAND FILTER HIGH PRESSURE PUMP 70 BAR INTERFACE FOR AUTOMATIC LOADING USING BELA DE PORTAL OR ROBOT MODEM FOR REMOTE DIAGNOSTICS AND TELESERVICE THREAD CUTTING WITHOUT COMPENSATING CHUCK MACHINE STATUS LIGHT GENERAL TECHNICAL DATA AIR SUPPLY 7 BAR OPERATING VOLTAGE 3 X 400 / 50 V/HZ TOTAL POWER DEMAND 133 KVA TRANSPORT DIMENSIONS OF THE MACHINE (LXWXH) APPROX. 3680 X 5400 X 3250 MM FLOOR SPACE OF THROUGHOUT THE FACILITY LXWXH) APPROX. 4800 X 7500 X 3300 MM MACHINE WEIGHT 20000 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación:
general
vertical machining centres; control: dmg mori slimline multi-touch control
characteristics
table surface 1100 x 560 mm
dimensions (l x w x h) 3,3 x 2,7 x 2,94 (4,33 x 2,7 x 2,94) m
rapid feed x / y / z 30/30/30 m/min
movement x / y / z 800/560/510 mm
spindle taper sk 40 din 69871
tool magazine with 30 positions
max. torque 82 nm
torque (100% dc) 54 nm
drive power (40% dc) 13 kw
drive power (100% dc) 9 kw
speed max. 12000 rpm
maximum load (table centre) 800 kg
weight approx. 5550 kg


production package 2 with chip conveyor production package 2 option includes: - internal coolant supply 20 bar; - tank capacity: 600l with papertype filter; - chip conveyor (scraper type) with tank capacity: 220 l (left) - bed and atc arm flushing via m-function - coolant spray gun for swarf
automation package automation package option includes: - automatic lift door on right cabin side - robot interface (dmg mori standard) - hydraulic and pneumatic preparation with 2 hydraulic and 2 pneumatic channels on the machine table (to expand the fixing system a
sk40 interface tool clamping sk 40 for pull-studs din 69872
direct measuring system x,y,z direct measuring system x, y, z inclusive air purge for measuring system
renishaw touch probe-kit for siemens control renishaw touch probe-kit for siemens control option includes: - pp40 touch probe with optical signal transmission; - ots probe for tool measurement; - calibration tool; - calibration ring; - case for equipment.
tool (un-) loading (siemens) tool (un-) loading through magazine door during auto mode option includes: - tool magazine door - automatic magazine shutter (instead of brushes) - buttons for magazine rotation for siemens control
technology cycle mpc 2.0 technology cycle machine protection control mpc 2.0 technology cycle monitors the spindle for vibrations, crash, imbalance and defective spindle bearings. machine protection by quick shutdown. for siemens control
dmg mori service agent dmg mori service agent warning in advance - service on time
dmg mori messenger dmg mori messenger installation kit for the connection of one machine.
dmg mori netservice - client dmg mori netservice - client qualified support by internet-based remote diagnostics will be installed on an external pc!
.gif" alt="Land-

general
vertical machining centres; control: dmg mori slimline multi-touch control
characteristics
table surface 1100 x 560 mm
dimensions (l x w x h) 3,3 x 2,7 x 2,94 (4,33 x 2,7 x 2,94) m
rapid feed x / y / z 30/30/30 m/min
movement x / y / z 800/560/510 mm
spindle taper sk 40 din 69871
tool magazine with 30 positions
max. torque 82 nm
torque (100% dc) 54 nm
drive power (40% dc) 13 kw
drive power (100% dc) 9 kw
speed max. 12000 rpm
maximum load (table centre) 800 kg
weight approx. 5550 kg


production package 2 with chip conveyor production package 2 option includes: - internal coolant supply 20 bar; - tank capacity: 600l with papertype filter; - chip conveyor (scraper type) with tank capacity: 220 l (left) - bed and atc arm flushing via m-function - coolant spray gun for swarf
automation package automation package option includes: - automatic lift door on right cabin side - robot interface (dmg mori standard) - hydraulic and pneumatic preparation with 2 hydraulic and 2 pneumatic channels on the machine table (to expand the fixing system a
sk40 interface tool clamping sk 40 for pull-studs din 69872
direct measuring system x,y,z direct measuring system x, y, z inclusive air purge for measuring system
renishaw touch probe-kit for siemens control renishaw touch probe-kit for siemens control option includes: - pp40 touch probe with optical signal transmission; - ots probe for tool measurement; - calibration tool; - calibration ring; - case for equipment.
tool (un-) loading (siemens) tool (un-) loading through magazine door during auto mode option includes: - tool magazine door - automatic magazine shutter (instead of brushes) - buttons for magazine rotation for siemens control
technology cycle mpc 2.0 technology cycle machine protection control mpc 2.0 technology cycle monitors the spindle for vibrations, crash, imbalance and defective spindle bearings. machine protection by quick shutdown. for siemens control
dmg mori service agent dmg mori service agent warning in advance - service on time
dmg mori messenger dmg mori messenger installation kit for the connection of one machine.
dmg mori netservice - client dmg mori netservice - client qualified support by internet-based remote diagnostics will be installed on an external pc!
" style="height: 18px;">

GENERAL
VERTICAL MACHINING CENTRES; CONTROL: DMG MORI SLIMLINE MULTI-TOUCH CONTROL
CHARACTERISTICS
TABLE SURFACE 1100 X 560 MM
DIMENSIONS (L X W X H) 3,3 X 2,7 X 2,94 (4,33 X 2,7 X 2,94) M
RAPID FEED X / Y / Z 30/30/30 M/MIN
MOVEMENT X / Y / Z 800/560/510 MM
SPINDLE TAPER SK 40 DIN 69871
TOOL MAGAZINE WITH 30 POSITIONS
MAX. TORQUE 82 NM
TORQUE (100% DC) 54 NM
DRIVE POWER (40% DC) 13 KW
DRIVE POWER (100% DC) 9 KW
SPEED MAX. 12000 RPM
MAXIMUM LOAD (TABLE CENTRE) 800 KG
WEIGHT APPROX. 5550 KG


PRODUCTION PACKAGE 2 WITH CHIP CONVEYOR PRODUCTION PACKAGE 2 OPTION INCLUDES: - INTERNAL COOLANT SUPPLY 20 BAR; - TANK CAPACITY: 600L WITH PAPERTYPE FILTER; - CHIP CONVEYOR (SCRAPER TYPE) WITH TANK CAPACITY: 220 L (LEFT) - BED AND ATC ARM FLUSHING VIA M-FUNCTION - COOLANT SPRAY GUN FOR SWARF
AUTOMATION PACKAGE AUTOMATION PACKAGE OPTION INCLUDES: - AUTOMATIC LIFT DOOR ON RIGHT CABIN SIDE - ROBOT INTERFACE (DMG MORI STANDARD) - HYDRAULIC AND PNEUMATIC PREPARATION WITH 2 HYDRAULIC AND 2 PNEUMATIC CHANNELS ON THE MACHINE TABLE (TO EXPAND THE FIXING SYSTEM A
SK40 INTERFACE TOOL CLAMPING SK 40 FOR PULL-STUDS DIN 69872
DIRECT MEASURING SYSTEM X,Y,Z DIRECT MEASURING SYSTEM X, Y, Z INCLUSIVE AIR PURGE FOR MEASURING SYSTEM
RENISHAW TOUCH PROBE-KIT FOR SIEMENS CONTROL RENISHAW TOUCH PROBE-KIT FOR SIEMENS CONTROL OPTION INCLUDES: - PP40 TOUCH PROBE WITH OPTICAL SIGNAL TRANSMISSION; - OTS PROBE FOR TOOL MEASUREMENT; - CALIBRATION TOOL; - CALIBRATION RING; - CASE FOR EQUIPMENT.
TOOL (UN-) LOADING (SIEMENS) TOOL (UN-) LOADING THROUGH MAGAZINE DOOR DURING AUTO MODE OPTION INCLUDES: - TOOL MAGAZINE DOOR - AUTOMATIC MAGAZINE SHUTTER (INSTEAD OF BRUSHES) - BUTTONS FOR MAGAZINE ROTATION FOR SIEMENS CONTROL
TECHNOLOGY CYCLE MPC 2.0 TECHNOLOGY CYCLE MACHINE PROTECTION CONTROL MPC 2.0 TECHNOLOGY CYCLE MONITORS THE SPINDLE FOR VIBRATIONS, CRASH, IMBALANCE AND DEFECTIVE SPINDLE BEARINGS. MACHINE PROTECTION BY QUICK SHUTDOWN. FOR SIEMENS CONTROL
DMG MORI SERVICE AGENT DMG MORI SERVICE AGENT WARNING IN ADVANCE - SERVICE ON TIME
DMG MORI MESSENGER DMG MORI MESSENGER INSTALLATION KIT FOR THE CONNECTION OF ONE MACHINE.
DMG MORI NETSERVICE - CLIENT DMG MORI NETSERVICE - CLIENT QUALIFIED SUPPORT BY INTERNET-BASED REMOTE DIAGNOSTICS WILL BE INSTALLED ON AN EXTERNAL PC!
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 905004
number: 1 pcs.
manufacturer: sw (swabian machine tools)
type: ba w06-22
control: siemens 840 d
year of manufacture: 2009
state of preservation: second-hand machine
stories about: 2-3 layers

description

milling

travel in x 600 mm
travel in y (875) 600 mm
travel in z 500 mm
maximum rapid traverse in x/y/z 100/100/100 m / min
maximum acceleration in x/y/z 12/10/20 m / s2
feed force in the x/y/z 10000/10000 / 2 ã? 5000 n
direct measuring system x/y/z/a(u)/c1(c2)/w1(w2)
linear actuator x/y/z
tool holder hsk-a 63
maximum speed milling spindle 17500 1/min
maximum power with ed 10-40 / 100% 35/26 kw
maximum torque at ed 10-40 / 100% 80/60 nm
spindle diameter in front bearing 80 mm
horizontally arranged 2 pcs. spindle
spindle distance 600 mm
pneumatic tool system control
pneumatic tool taper cleaning in milling spindle
chain-type tool magazine 2 ã? 36 stations
max tool diameter 80 mm
max tool diameter when free neighbouring seats 160 mm
maximum tool length 350 mm
maximum tool weight 10 kg
rotary pallet changer 2 fold
maximum workpiece weight per pallet of 600 kg
2 stk. swivel unit for clamping bridge
swivel unit nc-controlled
4 pcs. nc-controlled rotary table (5 axis) - 2 pcs. per swivel unit
bridges measure 1430 mm
2 set clamping bridge conditions
clamping hydraulics 250 bar
6 pcs. additional clamping circuit

more facilities

ir workpiece measuring probes
tool breakage control by means of laser
splash panel with fully encapsulated workspace
automatic loading door
lighting in the work area
oil / emulsion mist extraction system
scratch band conveyors
discharge height chip conveyor 1200 mm
machine is / was operated with emulsion
internal coolant supply
coolant system with paper band filter
high pressure pump 70 bar
interface for automatic loading using bela de portal or robot
modem for remote diagnostics and teleservice
thread cutting without compensating chuck
additional control panel for managing tool
machine status light

general technical data

air supply 7 bar
operating voltage 3 x 400 / 50 v/hz
total power demand 133 kva
transport dimensions of the machine (lxwxh) approx. 3680 x 5400 x 3250 mm
floor space of throughout the facility lxwxh) approx. 4800 x 7500 x 3300 mm
machine weight 20000 kg

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 905004 NUMBER: 1 PCS. MANUFACTURER: SW (SWABIAN MACHINE TOOLS) TYPE: BA W06-22 CONTROL: SIEMENS 840 D YEAR OF MANUFACTURE: 2009 STATE OF PRESERVATION: SECOND-HAND MACHINE STORIES ABOUT: 2-3 LAYERS DESCRIPTION MILLING TRAVEL IN X 600 MM TRAVEL IN Y (875) 600 MM TRAVEL IN Z 500 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 100/100/100 M / MIN MAXIMUM ACCELERATION IN X/Y/Z 12/10/20 M / S2 FEED FORCE IN THE X/Y/Z 10000/10000 / 2 Ã? 5000 N DIRECT MEASURING SYSTEM X/Y/Z/A(U)/C1(C2)/W1(W2) LINEAR ACTUATOR X/Y/Z TOOL HOLDER HSK-A 63 MAXIMUM SPEED MILLING SPINDLE 17500 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 35/26 KW MAXIMUM TORQUE AT ED 10-40 / 100% 80/60 NM SPINDLE DIAMETER IN FRONT BEARING 80 MM HORIZONTALLY ARRANGED 2 PCS. SPINDLE SPINDLE DISTANCE 600 MM PNEUMATIC TOOL SYSTEM CONTROL PNEUMATIC TOOL TAPER CLEANING IN MILLING SPINDLE CHAIN-TYPE TOOL MAGAZINE 2 Ã? 36 STATIONS MAX TOOL DIAMETER 80 MM MAX TOOL DIAMETER WHEN FREE NEIGHBOURING SEATS 160 MM MAXIMUM TOOL LENGTH 350 MM MAXIMUM TOOL WEIGHT 10 KG ROTARY PALLET CHANGER 2 FOLD MAXIMUM WORKPIECE WEIGHT PER PALLET OF 600 KG 2 STK. SWIVEL UNIT FOR CLAMPING BRIDGE SWIVEL UNIT NC-CONTROLLED 4 PCS. NC-CONTROLLED ROTARY TABLE (5 AXIS) - 2 PCS. PER SWIVEL UNIT BRIDGES MEASURE 1430 MM 2 SET CLAMPING BRIDGE CONDITIONS CLAMPING HYDRAULICS 250 BAR 6 PCS. ADDITIONAL CLAMPING CIRCUIT MORE FACILITIES IR WORKPIECE MEASURING PROBES TOOL BREAKAGE CONTROL BY MEANS OF LASER SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE AUTOMATIC LOADING DOOR LIGHTING IN THE WORK AREA OIL / EMULSION MIST EXTRACTION SYSTEM SCRATCH BAND CONVEYORS DISCHARGE HEIGHT CHIP CONVEYOR 1200 MM MACHINE IS / WAS OPERATED WITH EMULSION INTERNAL COOLANT SUPPLY COOLANT SYSTEM WITH PAPER BAND FILTER HIGH PRESSURE PUMP 70 BAR INTERFACE FOR AUTOMATIC LOADING USING BELA DE PORTAL OR ROBOT MODEM FOR REMOTE DIAGNOSTICS AND TELESERVICE THREAD CUTTING WITHOUT COMPENSATING CHUCK ADDITIONAL CONTROL PANEL FOR MANAGING TOOL MACHINE STATUS LIGHT GENERAL TECHNICAL DATA AIR SUPPLY 7 BAR OPERATING VOLTAGE 3 X 400 / 50 V/HZ TOTAL POWER DEMAND 133 KVA TRANSPORT DIMENSIONS OF THE MACHINE (LXWXH) APPROX. 3680 X 5400 X 3250 MM FLOOR SPACE OF THROUGHOUT THE FACILITY LXWXH) APPROX. 4800 X 7500 X 3300 MM MACHINE WEIGHT 20000 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación:
general
- c-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, reception hsk-a63 din 69893, with hydr. locking at turning - y-axis ±210 mm - b-axis ±120º, torque motor - tool magazine 36-fold disc magazine, - absolute, direct measuring systems in x-, y-, z1-axis - cooling pump 6 bar, 20 l/min, cooling - cooling system for spindle motors, motor console, turning-milling spindle, b axis torque motor; control: celos with siemens 840d sl operate
working area
swing diameter over guide ways 630 mm
turning diameter 630 mm
distance between spindles 1250 mm
bar diameter max. 102 mm
main drive 1
drive power (100% dc) 35 kw
drive power (40% dc) 45 kw
speed range - 4000 rpm
torque (100% dc) 600 nm
max. torque (40% dc) 770 nm
c-axis speed -4000 rpm
torque of c-axis (holding torque) 600 nm
input precision of c-axis 0,001 degree
turning-milling spindle
spindle taper hsk-63a din 69893
spindle speed -12000 rpm
drive power (100% dc) 27 kw
drive power (40% dc) 36 kw
torque (100% dc) 160 nm
torque (40% dc) 220 nm
angular value, min. 0,001 degree
locking moment 1700 nm
tool magazine
number of tools 36
max. tool diameter 80 mm
max. tool weight 12 kg
floor space/weight
dimensions (l x w x h) 6,86 x 4,22 x 2,53 m
weight approx. 18500 kg


excentric turning and milling operation excentric turning and milling operation (only with siemens control)
5-axis simultaneus machining 5-axis simultaneous machining
y1-axis with hydraulic locking y1-axis with hydraulic locking locking force 42 kn (9442 lbf)
tailstock function for the counter spindle tailstock function for the counter spindle, mechatronic control of the supporting force, selectable per program thrust force 250-600 dan, ctx beta / ctx beta tc. thrust force 250-1200 dan, ctx gamma tc
counter spindle ism 76 counter spindle as integrated spindle motor ism 76 - drive power 25 / 34 (33,5 /45,5 hp) - partial hollow clamping (hydraulic) - draw tube id 67 mm (2.63) - c axis and spindle brake (hydraulic) - basic slide (z3), ac servo drive with ball screw, a
bfu 8/20 bar, 600 l compact coolant system, consisting of: - coolant tank, 600 litre/158.5 gal - 8 bar/20 litre/min (ctx gamma tc 2nd: 8 bar/80 l/min /116 psi/ 21.1 gal/min) and 20 bar/25 litre/min (theoretical pump performance) (116.psi/5.2 gal/min and 290 psi/6
hinged typ chip conveyor hinged typ chip conveyor incl. coolant tank and coolant pump, 6 bar (87 psi)/20 litre/min
mechanical oil mist extractor 1100m³/h mechanical oil mist extractor, 1100 m³/h (38,830 ft³/h) with dirtiness indicator, class of filtration h13
automatic actuation of sliding cover, electrical automatic actuation of sliding cover, electrical. (remark: option b-l7250, automatic loading hatch is not possible)
workpiece touch probe, blum workpiece touch probe, make blum with cycle package quickstart consisting of: touch probe tc60 interchangeable in turning/milling spindle incl. sending and receiving unit 1 probe tip, measuring cycles
sensor package industry 4.0 sensor package industry 4.0 for holistic condition monitoring with visualization in condition analyser app and analysis of the machine and the machining processes (attention: the dmg mori condition analyser app is not part of this option)
3-jaw chuck, bhd 315-95, make smw 3-jaw power clamping chuck with through-hole, type bhd 315/95, make smw-autoblok incl. connecting elements
3-jaw chuck, bhd 315-95, make smw 3-jaw power clamping chuck with through-hole, type bhd 315/95, make smw-autoblok incl. connecting elements
ligh switch cabinet ligh switch cabinet (fluoresent lamp starterless) with integrated socket, 230 v, 2 a load, make rittal on lott via transformer chead main switch
design version black design version black working area door, front cover beneath working area door and front pane frame in colour deep black
package for increased ambient temperature package for increased ambient temperature consisting of cooling system for control cabinet (until 40º)
netservice (celos) netservice qualified support by internet-based remote diagnostics
service agent (celos) service agent (celos) overview of all maintenance work on the machine
messenger (celos) mesenger (celos) clear live status of the networked machines
.gif" alt="Land-

general
- c-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, reception hsk-a63 din 69893, with hydr. locking at turning - y-axis ±210 mm - b-axis ±120º, torque motor - tool magazine 36-fold disc magazine, - absolute, direct measuring systems in x-, y-, z1-axis - cooling pump 6 bar, 20 l/min, cooling - cooling system for spindle motors, motor console, turning-milling spindle, b axis torque motor; control: celos with siemens 840d sl operate
working area
swing diameter over guide ways 630 mm
turning diameter 630 mm
distance between spindles 1250 mm
bar diameter max. 102 mm
main drive 1
drive power (100% dc) 35 kw
drive power (40% dc) 45 kw
speed range - 4000 rpm
torque (100% dc) 600 nm
max. torque (40% dc) 770 nm
c-axis speed -4000 rpm
torque of c-axis (holding torque) 600 nm
input precision of c-axis 0,001 degree
turning-milling spindle
spindle taper hsk-63a din 69893
spindle speed -12000 rpm
drive power (100% dc) 27 kw
drive power (40% dc) 36 kw
torque (100% dc) 160 nm
torque (40% dc) 220 nm
angular value, min. 0,001 degree
locking moment 1700 nm
tool magazine
number of tools 36
max. tool diameter 80 mm
max. tool weight 12 kg
floor space/weight
dimensions (l x w x h) 6,86 x 4,22 x 2,53 m
weight approx. 18500 kg


excentric turning and milling operation excentric turning and milling operation (only with siemens control)
5-axis simultaneus machining 5-axis simultaneous machining
y1-axis with hydraulic locking y1-axis with hydraulic locking locking force 42 kn (9442 lbf)
tailstock function for the counter spindle tailstock function for the counter spindle, mechatronic control of the supporting force, selectable per program thrust force 250-600 dan, ctx beta / ctx beta tc. thrust force 250-1200 dan, ctx gamma tc
counter spindle ism 76 counter spindle as integrated spindle motor ism 76 - drive power 25 / 34 (33,5 /45,5 hp) - partial hollow clamping (hydraulic) - draw tube id 67 mm (2.63) - c axis and spindle brake (hydraulic) - basic slide (z3), ac servo drive with ball screw, a
bfu 8/20 bar, 600 l compact coolant system, consisting of: - coolant tank, 600 litre/158.5 gal - 8 bar/20 litre/min (ctx gamma tc 2nd: 8 bar/80 l/min /116 psi/ 21.1 gal/min) and 20 bar/25 litre/min (theoretical pump performance) (116.psi/5.2 gal/min and 290 psi/6
hinged typ chip conveyor hinged typ chip conveyor incl. coolant tank and coolant pump, 6 bar (87 psi)/20 litre/min
mechanical oil mist extractor 1100m³/h mechanical oil mist extractor, 1100 m³/h (38,830 ft³/h) with dirtiness indicator, class of filtration h13
automatic actuation of sliding cover, electrical automatic actuation of sliding cover, electrical. (remark: option b-l7250, automatic loading hatch is not possible)
workpiece touch probe, blum workpiece touch probe, make blum with cycle package quickstart consisting of: touch probe tc60 interchangeable in turning/milling spindle incl. sending and receiving unit 1 probe tip, measuring cycles
sensor package industry 4.0 sensor package industry 4.0 for holistic condition monitoring with visualization in condition analyser app and analysis of the machine and the machining processes (attention: the dmg mori condition analyser app is not part of this option)
3-jaw chuck, bhd 315-95, make smw 3-jaw power clamping chuck with through-hole, type bhd 315/95, make smw-autoblok incl. connecting elements
3-jaw chuck, bhd 315-95, make smw 3-jaw power clamping chuck with through-hole, type bhd 315/95, make smw-autoblok incl. connecting elements
ligh switch cabinet ligh switch cabinet (fluoresent lamp starterless) with integrated socket, 230 v, 2 a load, make rittal on lott via transformer chead main switch
design version black design version black working area door, front cover beneath working area door and front pane frame in colour deep black
package for increased ambient temperature package for increased ambient temperature consisting of cooling system for control cabinet (until 40º)
netservice (celos) netservice qualified support by internet-based remote diagnostics
service agent (celos) service agent (celos) overview of all maintenance work on the machine
messenger (celos) mesenger (celos) clear live status of the networked machines
" style="height: 18px;">

GENERAL
- C-AXIS AND SPINDLE BRAKE (HYDR.) - UPPER COMPOUND SLIDE WITH TURNING-/ MILLING SPINDLE, RECEPTION HSK-A63 DIN 69893, WITH HYDR. LOCKING AT TURNING - Y-AXIS ±210 MM - B-AXIS ±120º, TORQUE MOTOR - TOOL MAGAZINE 36-FOLD DISC MAGAZINE, - ABSOLUTE, DIRECT MEASURING SYSTEMS IN X-, Y-, Z1-AXIS - COOLING PUMP 6 BAR, 20 L/MIN, COOLING - COOLING SYSTEM FOR SPINDLE MOTORS, MOTOR CONSOLE, TURNING-MILLING SPINDLE, B AXIS TORQUE MOTOR; CONTROL: CELOS WITH SIEMENS 840D SL OPERATE
WORKING AREA
SWING DIAMETER OVER GUIDE WAYS 630 MM
TURNING DIAMETER 630 MM
DISTANCE BETWEEN SPINDLES 1250 MM
BAR DIAMETER MAX. 102 MM
MAIN DRIVE 1
DRIVE POWER (100% DC) 35 KW
DRIVE POWER (40% DC) 45 KW
SPEED RANGE - 4000 RPM
TORQUE (100% DC) 600 NM
MAX. TORQUE (40% DC) 770 NM
C-AXIS SPEED -4000 RPM
TORQUE OF C-AXIS (HOLDING TORQUE) 600 NM
INPUT PRECISION OF C-AXIS 0,001 DEGREE
TURNING-MILLING SPINDLE
SPINDLE TAPER HSK-63A DIN 69893
SPINDLE SPEED -12000 RPM
DRIVE POWER (100% DC) 27 KW
DRIVE POWER (40% DC) 36 KW
TORQUE (100% DC) 160 NM
TORQUE (40% DC) 220 NM
ANGULAR VALUE, MIN. 0,001 DEGREE
LOCKING MOMENT 1700 NM
TOOL MAGAZINE
NUMBER OF TOOLS 36
MAX. TOOL DIAMETER 80 MM
MAX. TOOL WEIGHT 12 KG
FLOOR SPACE/WEIGHT
DIMENSIONS (L X W X H) 6,86 X 4,22 X 2,53 M
WEIGHT APPROX. 18500 KG


EXCENTRIC TURNING AND MILLING OPERATION EXCENTRIC TURNING AND MILLING OPERATION (ONLY WITH SIEMENS CONTROL)
5-AXIS SIMULTANEUS MACHINING 5-AXIS SIMULTANEOUS MACHINING
Y1-AXIS WITH HYDRAULIC LOCKING Y1-AXIS WITH HYDRAULIC LOCKING LOCKING FORCE 42 KN (9442 LBF)
TAILSTOCK FUNCTION FOR THE COUNTER SPINDLE TAILSTOCK FUNCTION FOR THE COUNTER SPINDLE, MECHATRONIC CONTROL OF THE SUPPORTING FORCE, SELECTABLE PER PROGRAM THRUST FORCE 250-600 DAN, CTX BETA / CTX BETA TC. THRUST FORCE 250-1200 DAN, CTX GAMMA TC
COUNTER SPINDLE ISM 76 COUNTER SPINDLE AS INTEGRATED SPINDLE MOTOR ISM 76 - DRIVE POWER 25 / 34 (33,5 /45,5 HP) - PARTIAL HOLLOW CLAMPING (HYDRAULIC) - DRAW TUBE ID 67 MM (2.63) - C AXIS AND SPINDLE BRAKE (HYDRAULIC) - BASIC SLIDE (Z3), AC SERVO DRIVE WITH BALL SCREW, A
BFU 8/20 BAR, 600 L COMPACT COOLANT SYSTEM, CONSISTING OF: - COOLANT TANK, 600 LITRE/158.5 GAL - 8 BAR/20 LITRE/MIN (CTX GAMMA TC 2ND: 8 BAR/80 L/MIN /116 PSI/ 21.1 GAL/MIN) AND 20 BAR/25 LITRE/MIN (THEORETICAL PUMP PERFORMANCE) (116.PSI/5.2 GAL/MIN AND 290 PSI/6
HINGED TYP CHIP CONVEYOR HINGED TYP CHIP CONVEYOR INCL. COOLANT TANK AND COOLANT PUMP, 6 BAR (87 PSI)/20 LITRE/MIN
MECHANICAL OIL MIST EXTRACTOR 1100M³/H MECHANICAL OIL MIST EXTRACTOR, 1100 M³/H (38,830 FT³/H) WITH DIRTINESS INDICATOR, CLASS OF FILTRATION H13
AUTOMATIC ACTUATION OF SLIDING COVER, ELECTRICAL AUTOMATIC ACTUATION OF SLIDING COVER, ELECTRICAL. (REMARK: OPTION B-L7250, AUTOMATIC LOADING HATCH IS NOT POSSIBLE)
WORKPIECE TOUCH PROBE, BLUM WORKPIECE TOUCH PROBE, MAKE BLUM WITH CYCLE PACKAGE QUICKSTART CONSISTING OF: TOUCH PROBE TC60 INTERCHANGEABLE IN TURNING/MILLING SPINDLE INCL. SENDING AND RECEIVING UNIT 1 PROBE TIP, MEASURING CYCLES
SENSOR PACKAGE INDUSTRY 4.0 SENSOR PACKAGE INDUSTRY 4.0 FOR HOLISTIC CONDITION MONITORING WITH VISUALIZATION IN CONDITION ANALYSER APP AND ANALYSIS OF THE MACHINE AND THE MACHINING PROCESSES (ATTENTION: THE DMG MORI CONDITION ANALYSER APP IS NOT PART OF THIS OPTION)
3-JAW CHUCK, BHD 315-95, MAKE SMW 3-JAW POWER CLAMPING CHUCK WITH THROUGH-HOLE, TYPE BHD 315/95, MAKE SMW-AUTOBLOK INCL. CONNECTING ELEMENTS
3-JAW CHUCK, BHD 315-95, MAKE SMW 3-JAW POWER CLAMPING CHUCK WITH THROUGH-HOLE, TYPE BHD 315/95, MAKE SMW-AUTOBLOK INCL. CONNECTING ELEMENTS
LIGH SWITCH CABINET LIGH SWITCH CABINET (FLUORESENT LAMP STARTERLESS) WITH INTEGRATED SOCKET, 230 V, 2 A LOAD, MAKE RITTAL ON LOTT VIA TRANSFORMER CHEAD MAIN SWITCH
DESIGN VERSION BLACK DESIGN VERSION BLACK WORKING AREA DOOR, FRONT COVER BENEATH WORKING AREA DOOR AND FRONT PANE FRAME IN COLOUR DEEP BLACK
PACKAGE FOR INCREASED AMBIENT TEMPERATURE PACKAGE FOR INCREASED AMBIENT TEMPERATURE CONSISTING OF COOLING SYSTEM FOR CONTROL CABINET (UNTIL 40º)
NETSERVICE (CELOS) NETSERVICE QUALIFIED SUPPORT BY INTERNET-BASED REMOTE DIAGNOSTICS
SERVICE AGENT (CELOS) SERVICE AGENT (CELOS) OVERVIEW OF ALL MAINTENANCE WORK ON THE MACHINE
MESSENGER (CELOS) MESENGER (CELOS) CLEAR LIVE STATUS OF THE NETWORKED MACHINES
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 905007
number: 1 pcs.
manufacturer: gildemeister
type: twin 65 rg2
control: siemens 840 d powerline
year of construction: 2002
state of preservation: second-hand machine
machine a (hours): 69.200
spindle a (hours): 34.100

description

turning

maximum turning diameter 200 mm
maximum swing over bed cover 250 mm
maximum chuck diameter 250 mm
max speed main spindle 5000 1/min
maximum performance main spindle in ed 10-40 / 100% 37/25 kw
maximum torque of main spindle in ed 10-40 / 100% 390/270 nm
main spindle spindle passage 65 mm
spindle diameter in front bearing spindle 120 mm
spindle flange size main spindle 170 h 5
hollow clamping cylinder to the main spindle
maximum speed 5000 1/min spindle
maximum performance counter spindle in ed 10-40 / 100% 37/25 kw
max torque spindle in ed 10-40 / 100% 390/270 nm
spindle passage sub-spindle 65 mm
spindle diameter in front bearing spindle 120 mm
spindle flange size counter spindle 170 h 5
tailstock to counter spindle unit in the x direction of movable
tailstock quill stroke 300 mm
tailstock quill printing 600 dan

turret top
number of stations of which powered 12/12
tool holder in the turret vdi 30
axis in the x/y/z/w revolver

gun down
number of stations of which powered 12/12
tool holder in the turret vdi 30
the turret of x/z axes
maximum rapid traverse in x/y/z 30 /-/ 30 m / min

more facilities

splash panel with fully encapsulated workspace
lighting in the work area
oil / emulsion mist extraction system
chip conveyor
machine is / was operated with emulsion
coolant system
high pressure pump 20 bar
the belt of part of
precast acceptance facility
bar loader/bar feeder

general technical data

machine dimensions (lxwxh) approx. 4940 x 3000 x 2488 mm
machine weight 10000 kg

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 905007 NUMBER: 1 PCS. MANUFACTURER: GILDEMEISTER TYPE: TWIN 65 RG2 CONTROL: SIEMENS 840 D POWERLINE YEAR OF CONSTRUCTION: 2002 STATE OF PRESERVATION: SECOND-HAND MACHINE MACHINE A (HOURS): 69.200 SPINDLE A (HOURS): 34.100 DESCRIPTION TURNING MAXIMUM TURNING DIAMETER 200 MM MAXIMUM SWING OVER BED COVER 250 MM MAXIMUM CHUCK DIAMETER 250 MM MAX SPEED MAIN SPINDLE 5000 1/MIN MAXIMUM PERFORMANCE MAIN SPINDLE IN ED 10-40 / 100% 37/25 KW MAXIMUM TORQUE OF MAIN SPINDLE IN ED 10-40 / 100% 390/270 NM MAIN SPINDLE SPINDLE PASSAGE 65 MM SPINDLE DIAMETER IN FRONT BEARING SPINDLE 120 MM SPINDLE FLANGE SIZE MAIN SPINDLE 170 H 5 HOLLOW CLAMPING CYLINDER TO THE MAIN SPINDLE MAXIMUM SPEED 5000 1/MIN SPINDLE MAXIMUM PERFORMANCE COUNTER SPINDLE IN ED 10-40 / 100% 37/25 KW MAX TORQUE SPINDLE IN ED 10-40 / 100% 390/270 NM SPINDLE PASSAGE SUB-SPINDLE 65 MM SPINDLE DIAMETER IN FRONT BEARING SPINDLE 120 MM SPINDLE FLANGE SIZE COUNTER SPINDLE 170 H 5 TAILSTOCK TO COUNTER SPINDLE UNIT IN THE X DIRECTION OF MOVABLE TAILSTOCK QUILL STROKE 300 MM TAILSTOCK QUILL PRINTING 600 DAN TURRET TOP NUMBER OF STATIONS OF WHICH POWERED 12/12 TOOL HOLDER IN THE TURRET VDI 30 AXIS IN THE X/Y/Z/W REVOLVER GUN DOWN NUMBER OF STATIONS OF WHICH POWERED 12/12 TOOL HOLDER IN THE TURRET VDI 30 THE TURRET OF X/Z AXES MAXIMUM RAPID TRAVERSE IN X/Y/Z 30 /-/ 30 M / MIN MORE FACILITIES SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA OIL / EMULSION MIST EXTRACTION SYSTEM CHIP CONVEYOR MACHINE IS / WAS OPERATED WITH EMULSION COOLANT SYSTEM HIGH PRESSURE PUMP 20 BAR THE BELT OF PART OF PRECAST ACCEPTANCE FACILITY BAR LOADER/BAR FEEDER GENERAL TECHNICAL DATA MACHINE DIMENSIONS (LXWXH) APPROX. 4940 X 3000 X 2488 MM MACHINE WEIGHT 10000 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación:
general
- compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance hsk-63a din 69893 - y-axis ± 100 mm - b-axis ±110° with pneumatic locking - tools magazin disc with 1x24 positions - absolute direct gauging system in the x, y, z linear axes - coolant pump 5 bar; 20l/min - cooling system for spindle motor, turning/milling spindle, b-axis torque motor - usb interface, ethernet interface; control: celos with siemens 840d sl operate
working area
turning diameter 500 mm
swing diameter over guide ways 500 mm
max. turning length 800 mm
bar diameter max. 65 mm
work spindle (left)
spindle nose flat flange
diametre of spindle nose 170h5 mm
spindle diametre on front bearing 130 mm
spindle bore 87 mm
main drive 1
drive power (100% dc) 25 kw
drive power (40% dc) 32 kw
speed range - 5000 rpm
torque (100% dc) 280 nm
max. torque (40% dc) 380 nm
c-axis speed -5000 rpm
torque of c-axis (holding torque) 280 nm
turning-milling spindle
spindle taper capto c6
spindle speed -20000 rpm
drive power (100% dc) 19 kw
drive power (40% dc) 22 kw
torque (100% dc) 85 nm
torque (40% dc) 100 nm
angular value, min. 0 degree
locking moment 1000 nm
floor space/weight
dimensions (l x w x h) 4,78 x 2,2 x 2,02 m
weight approx. 10000 kg


excentric turning and milling operation excentric turning and milling operation (only with siemens control)
5-axis simultaneus machining 5-axis simultaneous machining
interpolation turning turning-recessing cycle manufacture of simple sealing surfaces and grooves using turn/mill centers
counter spindle centre complete machining of shaft components without process interruptions on turn/mill centers with counter spindle. cycle for automatic exchange of a center into the counter spindle and back into the tool magazine. the centre is not included in the delivery
technologie cycle alternating speed technology cycle for the application of an alternating speed for vibration sensitive set-ups (only in conjunction with siemens control)
program state control with the program state control of the part state is retained on the control and / or influenced. particularly suitable for multi-channel machines.
tool sort cykle order of the tools in the chain magazine according to the respective call in editing program. time-optimized sort in chain magazine by using the shuttle instead of the spindle. no relocation of multitools.
multi-thread cycle 2.0 multi-thread cycle 2.0 cycle to create position orientated threads with free contours, pitches and free number of threads, e.g. for big transmission or special threads. targeted overlapping of threads with cross-holes, e.g. redirection systems with ball
gearskiving 2.0 technology cycle for machining of straight, helical or convex (convex only for external gears) internal or external gears with conical shaped skiving tools up to module 4 (ctx tc / tc 4a) module 2 (ctv df)
3d quickset (with toolkit) 3d quickset for turn-mill machines - toolkit (consisting of magnetic foot holder with measuring ball and dial gauge) - for review and correction of the kinematic accuracy of conventional turning and 5-axis simultaneous machining - requires 5-
chuck rinsing device, mainspindle chuck rinsing device for main spindle, outside
chuck rinsing device, subspindle chuck rinsing device for subspindle, outside
clamping with balanced pressure, sub-sp. balanced pressure clamping device for sub-spindle
hollow clamping attachment, Ø 67 mm hydraulic hollow clamping attachment dia. 67 mm (2.63 inch) pullforce 58.5 kn (13.151,32 lbf) at pmax 40 bar (580,151 psi)
turn./mill. spindle, 20.000 rpm turning-/milling spindle with increased spindle speed, instead of standard - max. spindle speed 20.000 rpm - power 19/22.5 kw (25.5/30.2 hp) (s1-100%d.c. / s3-40%d.c.-2min) - torque 85/120 nm (64.2/88.5 lbxft) (s1-100%d.c. / s3-40%d.c.-2min)
tailstock function for counter spindle tailstock function for the counter spindle, mechatronic control of the supporting force, selectable per program thrust force 250-600 dan, ctx beta / ctx beta tc. thrust force 250-1200 dan, ctx gamma tc
counter spindle ism 52 counter spindle as integrated spindle motor ism 52 (instead of tailstock) - drive power (100%-40%ed) 20/27 kw (26.8/36.2 hp) - partial hollow clamping (hydraulic) - draw tube id 52 mm - c axis and spindle brake (hydraulic) - basic slide (z3), ac s
hinged type chip conveyor ctx beta hinged typ chip conveyor incl. coolant tank and coolant pump, 6 bar (87 psi)/20 litre/min
bfu 8/20 bar, 600 l compact coolant system, consisting of: - coolant tank, 600 litre/158.5 gal - 8 bar/20 litre/min (ctx gamma tc 2nd: 8 bar/80 l/min /116 psi/ 21.1 gal/min) and 20 bar/25 litre/min (theoretical pump performance) (116.psi/5.2 gal/min and 290 psi/6
inprocess measuring device, type renishaw inprocess measuring device for chuck parts, type renishaw incl. probe reception and tracer point interchangeable in turning/ milling spindle. the data transfer between probe and receiver is done by radio signals customised measuring cycles not included.
tool admission capto c6, instead hsk-63a turn/mill spindle and tool magazine with tool reception capto c6 (sandvik)
chain magazine for 80 tools capto c6 tool magazine, 80-fold chain magazine instead of 24-fold disc magazine, tool reception capto c6
sensor package industry 4.0 sensor package industry 4.0 for holistic condition monitoring with visualization in condition analyser app and analysis of the machine and the machining processes (attention: the dmg mori condition analyser app is not part of this option)
electrical interface for robo2go electrical interface standard profibus for robo2go (only at siemens control) incl. - additional compressed air supply - additional ethernet interface - power supply of the robot by the machine - user interface integrated into celos (with celos 3 as
netservice (celos) netservice qualified support by internet-based remote diagnostics
service agent (celos) service agent (celos) overview of all maintenance work on the machine
messenger (celos) mesenger (celos) clear live status of the networked machines
.gif" alt="Land-

general
- compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance hsk-63a din 69893 - y-axis ± 100 mm - b-axis ±110° with pneumatic locking - tools magazin disc with 1x24 positions - absolute direct gauging system in the x, y, z linear axes - coolant pump 5 bar; 20l/min - cooling system for spindle motor, turning/milling spindle, b-axis torque motor - usb interface, ethernet interface; control: celos with siemens 840d sl operate
working area
turning diameter 500 mm
swing diameter over guide ways 500 mm
max. turning length 800 mm
bar diameter max. 65 mm
work spindle (left)
spindle nose flat flange
diametre of spindle nose 170h5 mm
spindle diametre on front bearing 130 mm
spindle bore 87 mm
main drive 1
drive power (100% dc) 25 kw
drive power (40% dc) 32 kw
speed range - 5000 rpm
torque (100% dc) 280 nm
max. torque (40% dc) 380 nm
c-axis speed -5000 rpm
torque of c-axis (holding torque) 280 nm
turning-milling spindle
spindle taper capto c6
spindle speed -20000 rpm
drive power (100% dc) 19 kw
drive power (40% dc) 22 kw
torque (100% dc) 85 nm
torque (40% dc) 100 nm
angular value, min. 0 degree
locking moment 1000 nm
floor space/weight
dimensions (l x w x h) 4,78 x 2,2 x 2,02 m
weight approx. 10000 kg


excentric turning and milling operation excentric turning and milling operation (only with siemens control)
5-axis simultaneus machining 5-axis simultaneous machining
interpolation turning turning-recessing cycle manufacture of simple sealing surfaces and grooves using turn/mill centers
counter spindle centre complete machining of shaft components without process interruptions on turn/mill centers with counter spindle. cycle for automatic exchange of a center into the counter spindle and back into the tool magazine. the centre is not included in the delivery
technologie cycle alternating speed technology cycle for the application of an alternating speed for vibration sensitive set-ups (only in conjunction with siemens control)
program state control with the program state control of the part state is retained on the control and / or influenced. particularly suitable for multi-channel machines.
tool sort cykle order of the tools in the chain magazine according to the respective call in editing program. time-optimized sort in chain magazine by using the shuttle instead of the spindle. no relocation of multitools.
multi-thread cycle 2.0 multi-thread cycle 2.0 cycle to create position orientated threads with free contours, pitches and free number of threads, e.g. for big transmission or special threads. targeted overlapping of threads with cross-holes, e.g. redirection systems with ball
gearskiving 2.0 technology cycle for machining of straight, helical or convex (convex only for external gears) internal or external gears with conical shaped skiving tools up to module 4 (ctx tc / tc 4a) module 2 (ctv df)
3d quickset (with toolkit) 3d quickset for turn-mill machines - toolkit (consisting of magnetic foot holder with measuring ball and dial gauge) - for review and correction of the kinematic accuracy of conventional turning and 5-axis simultaneous machining - requires 5-
chuck rinsing device, mainspindle chuck rinsing device for main spindle, outside
chuck rinsing device, subspindle chuck rinsing device for subspindle, outside
clamping with balanced pressure, sub-sp. balanced pressure clamping device for sub-spindle
hollow clamping attachment, Ø 67 mm hydraulic hollow clamping attachment dia. 67 mm (2.63 inch) pullforce 58.5 kn (13.151,32 lbf) at pmax 40 bar (580,151 psi)
turn./mill. spindle, 20.000 rpm turning-/milling spindle with increased spindle speed, instead of standard - max. spindle speed 20.000 rpm - power 19/22.5 kw (25.5/30.2 hp) (s1-100%d.c. / s3-40%d.c.-2min) - torque 85/120 nm (64.2/88.5 lbxft) (s1-100%d.c. / s3-40%d.c.-2min)
tailstock function for counter spindle tailstock function for the counter spindle, mechatronic control of the supporting force, selectable per program thrust force 250-600 dan, ctx beta / ctx beta tc. thrust force 250-1200 dan, ctx gamma tc
counter spindle ism 52 counter spindle as integrated spindle motor ism 52 (instead of tailstock) - drive power (100%-40%ed) 20/27 kw (26.8/36.2 hp) - partial hollow clamping (hydraulic) - draw tube id 52 mm - c axis and spindle brake (hydraulic) - basic slide (z3), ac s
hinged type chip conveyor ctx beta hinged typ chip conveyor incl. coolant tank and coolant pump, 6 bar (87 psi)/20 litre/min
bfu 8/20 bar, 600 l compact coolant system, consisting of: - coolant tank, 600 litre/158.5 gal - 8 bar/20 litre/min (ctx gamma tc 2nd: 8 bar/80 l/min /116 psi/ 21.1 gal/min) and 20 bar/25 litre/min (theoretical pump performance) (116.psi/5.2 gal/min and 290 psi/6
inprocess measuring device, type renishaw inprocess measuring device for chuck parts, type renishaw incl. probe reception and tracer point interchangeable in turning/ milling spindle. the data transfer between probe and receiver is done by radio signals customised measuring cycles not included.
tool admission capto c6, instead hsk-63a turn/mill spindle and tool magazine with tool reception capto c6 (sandvik)
chain magazine for 80 tools capto c6 tool magazine, 80-fold chain magazine instead of 24-fold disc magazine, tool reception capto c6
sensor package industry 4.0 sensor package industry 4.0 for holistic condition monitoring with visualization in condition analyser app and analysis of the machine and the machining processes (attention: the dmg mori condition analyser app is not part of this option)
electrical interface for robo2go electrical interface standard profibus for robo2go (only at siemens control) incl. - additional compressed air supply - additional ethernet interface - power supply of the robot by the machine - user interface integrated into celos (with celos 3 as
netservice (celos) netservice qualified support by internet-based remote diagnostics
service agent (celos) service agent (celos) overview of all maintenance work on the machine
messenger (celos) mesenger (celos) clear live status of the networked machines
" style="height: 18px;">

GENERAL
- COMPOUND SLIDES WITH TURNING/MILLING SPINDLE AS INTEGRATED SPINDLE MOTOR, WITH HYDR. LOCKING AT TURNING ACCEPTANCE HSK-63A DIN 69893 - Y-AXIS ± 100 MM - B-AXIS ±110° WITH PNEUMATIC LOCKING - TOOLS MAGAZIN DISC WITH 1X24 POSITIONS - ABSOLUTE DIRECT GAUGING SYSTEM IN THE X, Y, Z LINEAR AXES - COOLANT PUMP 5 BAR; 20L/MIN - COOLING SYSTEM FOR SPINDLE MOTOR, TURNING/MILLING SPINDLE, B-AXIS TORQUE MOTOR - USB INTERFACE, ETHERNET INTERFACE; CONTROL: CELOS WITH SIEMENS 840D SL OPERATE
WORKING AREA
TURNING DIAMETER 500 MM
SWING DIAMETER OVER GUIDE WAYS 500 MM
MAX. TURNING LENGTH 800 MM
BAR DIAMETER MAX. 65 MM
WORK SPINDLE (LEFT)
SPINDLE NOSE FLAT FLANGE
DIAMETRE OF SPINDLE NOSE 170H5 MM
SPINDLE DIAMETRE ON FRONT BEARING 130 MM
SPINDLE BORE 87 MM
MAIN DRIVE 1
DRIVE POWER (100% DC) 25 KW
DRIVE POWER (40% DC) 32 KW
SPEED RANGE - 5000 RPM
TORQUE (100% DC) 280 NM
MAX. TORQUE (40% DC) 380 NM
C-AXIS SPEED -5000 RPM
TORQUE OF C-AXIS (HOLDING TORQUE) 280 NM
TURNING-MILLING SPINDLE
SPINDLE TAPER CAPTO C6
SPINDLE SPEED -20000 RPM
DRIVE POWER (100% DC) 19 KW
DRIVE POWER (40% DC) 22 KW
TORQUE (100% DC) 85 NM
TORQUE (40% DC) 100 NM
ANGULAR VALUE, MIN. 0 DEGREE
LOCKING MOMENT 1000 NM
FLOOR SPACE/WEIGHT
DIMENSIONS (L X W X H) 4,78 X 2,2 X 2,02 M
WEIGHT APPROX. 10000 KG


EXCENTRIC TURNING AND MILLING OPERATION EXCENTRIC TURNING AND MILLING OPERATION (ONLY WITH SIEMENS CONTROL)
5-AXIS SIMULTANEUS MACHINING 5-AXIS SIMULTANEOUS MACHINING
INTERPOLATION TURNING TURNING-RECESSING CYCLE MANUFACTURE OF SIMPLE SEALING SURFACES AND GROOVES USING TURN/MILL CENTERS
COUNTER SPINDLE CENTRE COMPLETE MACHINING OF SHAFT COMPONENTS WITHOUT PROCESS INTERRUPTIONS ON TURN/MILL CENTERS WITH COUNTER SPINDLE. CYCLE FOR AUTOMATIC EXCHANGE OF A CENTER INTO THE COUNTER SPINDLE AND BACK INTO THE TOOL MAGAZINE. THE CENTRE IS NOT INCLUDED IN THE DELIVERY
TECHNOLOGIE CYCLE ALTERNATING SPEED TECHNOLOGY CYCLE FOR THE APPLICATION OF AN ALTERNATING SPEED FOR VIBRATION SENSITIVE SET-UPS (ONLY IN CONJUNCTION WITH SIEMENS CONTROL)
PROGRAM STATE CONTROL WITH THE PROGRAM STATE CONTROL OF THE PART STATE IS RETAINED ON THE CONTROL AND / OR INFLUENCED. PARTICULARLY SUITABLE FOR MULTI-CHANNEL MACHINES.
TOOL SORT CYKLE ORDER OF THE TOOLS IN THE CHAIN MAGAZINE ACCORDING TO THE RESPECTIVE CALL IN EDITING PROGRAM. TIME-OPTIMIZED SORT IN CHAIN MAGAZINE BY USING THE SHUTTLE INSTEAD OF THE SPINDLE. NO RELOCATION OF MULTITOOLS.
MULTI-THREAD CYCLE 2.0 MULTI-THREAD CYCLE 2.0 CYCLE TO CREATE POSITION ORIENTATED THREADS WITH FREE CONTOURS, PITCHES AND FREE NUMBER OF THREADS, E.G. FOR BIG TRANSMISSION OR SPECIAL THREADS. TARGETED OVERLAPPING OF THREADS WITH CROSS-HOLES, E.G. REDIRECTION SYSTEMS WITH BALL
GEARSKIVING 2.0 TECHNOLOGY CYCLE FOR MACHINING OF STRAIGHT, HELICAL OR CONVEX (CONVEX ONLY FOR EXTERNAL GEARS) INTERNAL OR EXTERNAL GEARS WITH CONICAL SHAPED SKIVING TOOLS UP TO MODULE 4 (CTX TC / TC 4A) MODULE 2 (CTV DF)
3D QUICKSET (WITH TOOLKIT) 3D QUICKSET FOR TURN-MILL MACHINES - TOOLKIT (CONSISTING OF MAGNETIC FOOT HOLDER WITH MEASURING BALL AND DIAL GAUGE) - FOR REVIEW AND CORRECTION OF THE KINEMATIC ACCURACY OF CONVENTIONAL TURNING AND 5-AXIS SIMULTANEOUS MACHINING - REQUIRES 5-
CHUCK RINSING DEVICE, MAINSPINDLE CHUCK RINSING DEVICE FOR MAIN SPINDLE, OUTSIDE
CHUCK RINSING DEVICE, SUBSPINDLE CHUCK RINSING DEVICE FOR SUBSPINDLE, OUTSIDE
CLAMPING WITH BALANCED PRESSURE, SUB-SP. BALANCED PRESSURE CLAMPING DEVICE FOR SUB-SPINDLE
HOLLOW CLAMPING ATTACHMENT, Ø 67 MM HYDRAULIC HOLLOW CLAMPING ATTACHMENT DIA. 67 MM (2.63 INCH) PULLFORCE 58.5 KN (13.151,32 LBF) AT PMAX 40 BAR (580,151 PSI)
TURN./MILL. SPINDLE, 20.000 RPM TURNING-/MILLING SPINDLE WITH INCREASED SPINDLE SPEED, INSTEAD OF STANDARD - MAX. SPINDLE SPEED 20.000 RPM - POWER 19/22.5 KW (25.5/30.2 HP) (S1-100%D.C. / S3-40%D.C.-2MIN) - TORQUE 85/120 NM (64.2/88.5 LBXFT) (S1-100%D.C. / S3-40%D.C.-2MIN)
TAILSTOCK FUNCTION FOR COUNTER SPINDLE TAILSTOCK FUNCTION FOR THE COUNTER SPINDLE, MECHATRONIC CONTROL OF THE SUPPORTING FORCE, SELECTABLE PER PROGRAM THRUST FORCE 250-600 DAN, CTX BETA / CTX BETA TC. THRUST FORCE 250-1200 DAN, CTX GAMMA TC
COUNTER SPINDLE ISM 52 COUNTER SPINDLE AS INTEGRATED SPINDLE MOTOR ISM 52 (INSTEAD OF TAILSTOCK) - DRIVE POWER (100%-40%ED) 20/27 KW (26.8/36.2 HP) - PARTIAL HOLLOW CLAMPING (HYDRAULIC) - DRAW TUBE ID 52 MM - C AXIS AND SPINDLE BRAKE (HYDRAULIC) - BASIC SLIDE (Z3), AC S
HINGED TYPE CHIP CONVEYOR CTX BETA HINGED TYP CHIP CONVEYOR INCL. COOLANT TANK AND COOLANT PUMP, 6 BAR (87 PSI)/20 LITRE/MIN
BFU 8/20 BAR, 600 L COMPACT COOLANT SYSTEM, CONSISTING OF: - COOLANT TANK, 600 LITRE/158.5 GAL - 8 BAR/20 LITRE/MIN (CTX GAMMA TC 2ND: 8 BAR/80 L/MIN /116 PSI/ 21.1 GAL/MIN) AND 20 BAR/25 LITRE/MIN (THEORETICAL PUMP PERFORMANCE) (116.PSI/5.2 GAL/MIN AND 290 PSI/6
INPROCESS MEASURING DEVICE, TYPE RENISHAW INPROCESS MEASURING DEVICE FOR CHUCK PARTS, TYPE RENISHAW INCL. PROBE RECEPTION AND TRACER POINT INTERCHANGEABLE IN TURNING/ MILLING SPINDLE. THE DATA TRANSFER BETWEEN PROBE AND RECEIVER IS DONE BY RADIO SIGNALS CUSTOMISED MEASURING CYCLES NOT INCLUDED.
TOOL ADMISSION CAPTO C6, INSTEAD HSK-63A TURN/MILL SPINDLE AND TOOL MAGAZINE WITH TOOL RECEPTION CAPTO C6 (SANDVIK)
CHAIN MAGAZINE FOR 80 TOOLS CAPTO C6 TOOL MAGAZINE, 80-FOLD CHAIN MAGAZINE INSTEAD OF 24-FOLD DISC MAGAZINE, TOOL RECEPTION CAPTO C6
SENSOR PACKAGE INDUSTRY 4.0 SENSOR PACKAGE INDUSTRY 4.0 FOR HOLISTIC CONDITION MONITORING WITH VISUALIZATION IN CONDITION ANALYSER APP AND ANALYSIS OF THE MACHINE AND THE MACHINING PROCESSES (ATTENTION: THE DMG MORI CONDITION ANALYSER APP IS NOT PART OF THIS OPTION)
ELECTRICAL INTERFACE FOR ROBO2GO ELECTRICAL INTERFACE STANDARD PROFIBUS FOR ROBO2GO (ONLY AT SIEMENS CONTROL) INCL. - ADDITIONAL COMPRESSED AIR SUPPLY - ADDITIONAL ETHERNET INTERFACE - POWER SUPPLY OF THE ROBOT BY THE MACHINE - USER INTERFACE INTEGRATED INTO CELOS (WITH CELOS 3 AS
NETSERVICE (CELOS) NETSERVICE QUALIFIED SUPPORT BY INTERNET-BASED REMOTE DIAGNOSTICS
SERVICE AGENT (CELOS) SERVICE AGENT (CELOS) OVERVIEW OF ALL MAINTENANCE WORK ON THE MACHINE
MESSENGER (CELOS) MESENGER (CELOS) CLEAR LIVE STATUS OF THE NETWORKED MACHINES
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: dmg type: ctx 450 eco v3
year of constr.: 2014 control: siemens 840 d swing above bed: 650 mm travel plan: 267 mm
longitudinal travel: 600 mm
speed range from - until:-4000 rpm
approximate weight: 5,800 kg equipment
axles: 3 driven tools: 12 hollow clamping device: yes tailstock: yes
quill stroke automatic: yes
chip conveyor: yes

accessories:

rod package + interface
workpiece pick-up facility
connecting rod loader
bar passage diameter. 65

subject to error and sale.			
			
 MANUFACTURER: DMG TYPE: CTX 450 ECO V3 YEAR OF CONSTR.: 2014 CONTROL: SIEMENS 840 D SWING ABOVE BED: 650 MM TRAVEL PLAN: 267 MM LONGITUDINAL TRAVEL: 600 MM SPEED RANGE FROM - UNTIL:-4000 RPM APPROXIMATE WEIGHT: 5,800 KG EQUIPMENT AXLES: 3 DRIVEN TOOLS: 12 HOLLOW CLAMPING DEVICE: YES TAILSTOCK: YES QUILL STROKE AUTOMATIC: YES CHIP CONVEYOR: YES ACCESSORIES: ROD PACKAGE + INTERFACE WORKPIECE PICK-UP FACILITY CONNECTING ROD LOADER BAR PASSAGE DIAMETER. 65 SUBJECT TO ERROR AND SALE.
Vendedor: Spantech GmbH
Año de construcción: usado
Ubicación:
general
precision centre - linear drive package - active cooling for spindle, linear drives and electrical cabinet - frame temperatur control - direct measuring system - chiptray, coolant/airblast changing - full cabin including 2nd door; control: celos with siemens 840d sl operate
technical data
spindle taper hsk-a 63
feed rate longitudinal/transverse/vertical 1-80000/1-80000/1-80000 mm/min
rapid traverse longitudinal/transverse/vertical 80/80/80 m/min
working area 1
longitudinal 650 mm
cross 600 mm
vertical 380 mm
tool changer
type of magazine chain
type of gripper double gripper
number of tools 30
floor space/weight
dimensions (l x w x h) 2,92 x 2,42 x 2,88 (3,0) m
weight approx. 9600 kg


hsc70 5-axis specification hsc70 with 5-axis specification clamping area Ø 600 mm // Ø 23.61 inch swivel range b-axis +20/-110°; c-axis 360° table load max. 500 kg // 1102.31 lbs absolute measuring systems incl. permanent cooling of b- and c-axis motor
spindle speed up to 28,000rpm shaft cooling spindle speed 20 up to 28,000 rpm within shaft cooling inclusive mpc machine protection control (differently from standard)
drive power (100% dc) 20 kw
drive power (40% dc) 30 kw
speed range 20 - 28000 rpm
spindle taper hsk-a 63
infrared measuring probe tc 52 infrared touch probe type blum tc 52
tool measuring blum laser taktil tool measuring blum laser tactil non-contact optical tool measuring system with integrated mechanical touch probe including calibration tool
3d quick set 3d quickset tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
signal lamp 4-colour signal lamp 4-colour red: general error yellow: intervention necessary green: automatic mode blue: set-up mode
production package 980l ics coolant tempering production package coolant tempered with internal coolant supply (ics) special coolant temperature control for more kinematic stability. including paperband filter, coolant tempering and stirring device, swarf conveyor (scraper type) 40 bar/23 l/min/ 980
minimum lubrication external 2 jets minimum lubrication external with 2 jets
air blast through spindle centre dry air blast through spindle centre (dry) activated by m function, (up 28.000rpm and higher)
oil and emulsion mist separator oil and emulsion mist separator mechanical
application tuning cycle atc application tuning cycle atc programmable feed parameter selection for machining task: accuracy/surface/speed
energy meter for siemens 840 sl op celos energy meter for 3d control siemens 840d solutionline operate with celos
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area. release after check list has been filled in.
preparation handling system dmg automation preparation handling system from dmg mori systems gmbh
portal v2a cover portal v2a cover sheets avoid negative chip and coolant influences.
safety glass at operators door and side panel laminated safety glass at operators door and side panel
netservice (celos) netservice qualified support by internet-based remote diagnostics
service agent (celos) service agent (celos) overview of all maintenance work on the machine
messenger (celos) mesenger (celos) clear live status of the networked machines
.gif" alt="Land-

general
precision centre - linear drive package - active cooling for spindle, linear drives and electrical cabinet - frame temperatur control - direct measuring system - chiptray, coolant/airblast changing - full cabin including 2nd door; control: celos with siemens 840d sl operate
technical data
spindle taper hsk-a 63
feed rate longitudinal/transverse/vertical 1-80000/1-80000/1-80000 mm/min
rapid traverse longitudinal/transverse/vertical 80/80/80 m/min
working area 1
longitudinal 650 mm
cross 600 mm
vertical 380 mm
tool changer
type of magazine chain
type of gripper double gripper
number of tools 30
floor space/weight
dimensions (l x w x h) 2,92 x 2,42 x 2,88 (3,0) m
weight approx. 9600 kg


hsc70 5-axis specification hsc70 with 5-axis specification clamping area Ø 600 mm // Ø 23.61 inch swivel range b-axis +20/-110°; c-axis 360° table load max. 500 kg // 1102.31 lbs absolute measuring systems incl. permanent cooling of b- and c-axis motor
spindle speed up to 28,000rpm shaft cooling spindle speed 20 up to 28,000 rpm within shaft cooling inclusive mpc machine protection control (differently from standard)
drive power (100% dc) 20 kw
drive power (40% dc) 30 kw
speed range 20 - 28000 rpm
spindle taper hsk-a 63
infrared measuring probe tc 52 infrared touch probe type blum tc 52
tool measuring blum laser taktil tool measuring blum laser tactil non-contact optical tool measuring system with integrated mechanical touch probe including calibration tool
3d quick set 3d quickset tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
signal lamp 4-colour signal lamp 4-colour red: general error yellow: intervention necessary green: automatic mode blue: set-up mode
production package 980l ics coolant tempering production package coolant tempered with internal coolant supply (ics) special coolant temperature control for more kinematic stability. including paperband filter, coolant tempering and stirring device, swarf conveyor (scraper type) 40 bar/23 l/min/ 980
minimum lubrication external 2 jets minimum lubrication external with 2 jets
air blast through spindle centre dry air blast through spindle centre (dry) activated by m function, (up 28.000rpm and higher)
oil and emulsion mist separator oil and emulsion mist separator mechanical
application tuning cycle atc application tuning cycle atc programmable feed parameter selection for machining task: accuracy/surface/speed
energy meter for siemens 840 sl op celos energy meter for 3d control siemens 840d solutionline operate with celos
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area. release after check list has been filled in.
preparation handling system dmg automation preparation handling system from dmg mori systems gmbh
portal v2a cover portal v2a cover sheets avoid negative chip and coolant influences.
safety glass at operators door and side panel laminated safety glass at operators door and side panel
netservice (celos) netservice qualified support by internet-based remote diagnostics
service agent (celos) service agent (celos) overview of all maintenance work on the machine
messenger (celos) mesenger (celos) clear live status of the networked machines
" style="height: 18px;">

GENERAL
PRECISION CENTRE - LINEAR DRIVE PACKAGE - ACTIVE COOLING FOR SPINDLE, LINEAR DRIVES AND ELECTRICAL CABINET - FRAME TEMPERATUR CONTROL - DIRECT MEASURING SYSTEM - CHIPTRAY, COOLANT/AIRBLAST CHANGING - FULL CABIN INCLUDING 2ND DOOR; CONTROL: CELOS WITH SIEMENS 840D SL OPERATE
TECHNICAL DATA
SPINDLE TAPER HSK-A 63
FEED RATE LONGITUDINAL/TRANSVERSE/VERTICAL 1-80000/1-80000/1-80000 MM/MIN
RAPID TRAVERSE LONGITUDINAL/TRANSVERSE/VERTICAL 80/80/80 M/MIN
WORKING AREA 1
LONGITUDINAL 650 MM
CROSS 600 MM
VERTICAL 380 MM
TOOL CHANGER
TYPE OF MAGAZINE CHAIN
TYPE OF GRIPPER DOUBLE GRIPPER
NUMBER OF TOOLS 30
FLOOR SPACE/WEIGHT
DIMENSIONS (L X W X H) 2,92 X 2,42 X 2,88 (3,0) M
WEIGHT APPROX. 9600 KG


HSC70 5-AXIS SPECIFICATION HSC70 WITH 5-AXIS SPECIFICATION CLAMPING AREA Ø 600 MM // Ø 23.61 INCH SWIVEL RANGE B-AXIS +20/-110°; C-AXIS 360° TABLE LOAD MAX. 500 KG // 1102.31 LBS ABSOLUTE MEASURING SYSTEMS INCL. PERMANENT COOLING OF B- AND C-AXIS MOTOR
SPINDLE SPEED UP TO 28,000RPM SHAFT COOLING SPINDLE SPEED 20 UP TO 28,000 RPM WITHIN SHAFT COOLING INCLUSIVE MPC MACHINE PROTECTION CONTROL (DIFFERENTLY FROM STANDARD)
DRIVE POWER (100% DC) 20 KW
DRIVE POWER (40% DC) 30 KW
SPEED RANGE 20 - 28000 RPM
SPINDLE TAPER HSK-A 63
INFRARED MEASURING PROBE TC 52 INFRARED TOUCH PROBE TYPE BLUM TC 52
TOOL MEASURING BLUM LASER TAKTIL TOOL MEASURING BLUM LASER TACTIL NON-CONTACT OPTICAL TOOL MEASURING SYSTEM WITH INTEGRATED MECHANICAL TOUCH PROBE INCLUDING CALIBRATION TOOL
3D QUICK SET 3D QUICKSET TOOL KIT FOR CONTROL AND COMPENSATION OF THE CINEMATIC ACCURACY OF 5 AXIS MACHINE CONFIGURATIONS (ONLY WITH OPTION TOUCH PROBE)
SIGNAL LAMP 4-COLOUR SIGNAL LAMP 4-COLOUR RED: GENERAL ERROR YELLOW: INTERVENTION NECESSARY GREEN: AUTOMATIC MODE BLUE: SET-UP MODE
PRODUCTION PACKAGE 980L ICS COOLANT TEMPERING PRODUCTION PACKAGE COOLANT TEMPERED WITH INTERNAL COOLANT SUPPLY (ICS) SPECIAL COOLANT TEMPERATURE CONTROL FOR MORE KINEMATIC STABILITY. INCLUDING PAPERBAND FILTER, COOLANT TEMPERING AND STIRRING DEVICE, SWARF CONVEYOR (SCRAPER TYPE) 40 BAR/23 L/MIN/ 980
MINIMUM LUBRICATION EXTERNAL 2 JETS MINIMUM LUBRICATION EXTERNAL WITH 2 JETS
AIR BLAST THROUGH SPINDLE CENTRE DRY AIR BLAST THROUGH SPINDLE CENTRE (DRY) ACTIVATED BY M FUNCTION, (UP 28.000RPM AND HIGHER)
OIL AND EMULSION MIST SEPARATOR OIL AND EMULSION MIST SEPARATOR MECHANICAL
APPLICATION TUNING CYCLE ATC APPLICATION TUNING CYCLE ATC PROGRAMMABLE FEED PARAMETER SELECTION FOR MACHINING TASK: ACCURACY/SURFACE/SPEED
ENERGY METER FOR SIEMENS 840 SL OP CELOS ENERGY METER FOR 3D CONTROL SIEMENS 840D SOLUTIONLINE OPERATE WITH CELOS
OPERATION MODE 4 OPERATION MODE 4 PROCESS MONITORING IN THE PRODUCTION MANUAL INTERVENTION WITH OPEN DOORS OF MACHINING AREA. RELEASE AFTER CHECK LIST HAS BEEN FILLED IN.
PREPARATION HANDLING SYSTEM DMG AUTOMATION PREPARATION HANDLING SYSTEM FROM DMG MORI SYSTEMS GMBH
PORTAL V2A COVER PORTAL V2A COVER SHEETS AVOID NEGATIVE CHIP AND COOLANT INFLUENCES.
SAFETY GLASS AT OPERATORS DOOR AND SIDE PANEL LAMINATED SAFETY GLASS AT OPERATORS DOOR AND SIDE PANEL
NETSERVICE (CELOS) NETSERVICE QUALIFIED SUPPORT BY INTERNET-BASED REMOTE DIAGNOSTICS
SERVICE AGENT (CELOS) SERVICE AGENT (CELOS) OVERVIEW OF ALL MAINTENANCE WORK ON THE MACHINE
MESSENGER (CELOS) MESENGER (CELOS) CLEAR LIVE STATUS OF THE NETWORKED MACHINES
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-machining center vertical manufacturer: dmg
type: ecomill 1035 v
construction year: 2014
control: siemens 840 d
axles: 3
procedures:
x: 1035
y: 560
z: 510

speed: 10,000 rpm.
chip conveyor: yes
internal coolant supply: yes
weight: ca. 6 000 kg

accessories:

electronic handwheel
renishaw measuring sensor kit
direct measuring system

errors excepted			            
	           		                      
 MACHINING CENTER VERTICAL MANUFACTURER: DMG TYPE: ECOMILL 1035 V CONSTRUCTION YEAR: 2014 CONTROL: SIEMENS 840 D AXLES: 3 PROCEDURES: X: 1035 Y: 560 Z: 510 SPEED: 10,000 RPM. CHIP CONVEYOR: YES INTERNAL COOLANT SUPPLY: YES WEIGHT: CA. 6 000 KG ACCESSORIES: ELECTRONIC HANDWHEEL RENISHAW MEASURING SENSOR KIT DIRECT MEASURING SYSTEM ERRORS EXCEPTED
Vendedor: Spantech GmbH
Año de construcción: usado
Ubicación:
general
precision centre - linear drive package - active cooling for spindle, linear drives and electrical cabinet - frame temperatur control - direct measuring system - chiptray, coolant/airblast changing - full cabin including 2nd door; control: 3d-control siemens 840d sl operate
technical data
spindle taper hsk-a 63
feed rate longitudinal/transverse/vertical 1-80000/1-80000/1-80000 mm/min
rapid traverse longitudinal/transverse/vertical 80/80/80 m/min
working area 1
longitudinal 650 mm
cross 600 mm
vertical 380 mm
tool changer
type of magazine chain
type of gripper double gripper
number of tools 120
floor space/weight
dimensions (l x w x h) 7,28 x 6,63 x 3 m
weight approx. 9600 kg


rigid table rigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbs
spindle speed up to 28,000rpm shaft cooling spindle speed 20 up to 28,000 rpm within shaft cooling inclusive mpc machine protection control (differently from standard)
drive power (100% dc) 20 kw
drive power (40% dc) 30 kw
speed range 20 - 28000 rpm
spindle taper hsk-a 63
chain-type tool magazine 120 pockets werkzeugmagazin 120 plätze kettenmagazin mit doppelgreifer
infrared measuring probe ts 649 infrared touch probe make heidenhain ts 649
tool measuring blum laser tool measuring blum laser non-contact optical tool measuring system including calibration tool
signal lamp 4-colour signal lamp 4-colour red: general error yellow: intervention necessary green: automatic mode blue: set-up mode
production package 980l ics coolant tempering production package coolant tempered with internal coolant supply (ics) special coolant temperature control for more kinematic stability. including paperband filter, coolant tempering and stirring device, swarf conveyor (scraper type) 40 bar/23 l/min/ 980
air blast through spindle centre dry air blast through spindle centre (dry) activated by m function, (up 28.000rpm and higher)
high-speed-settings high-speed-settings selection of the optimal milling mode for the next machining-step.
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area. release after check list has been filled in.
safety glass at operators door and side panel laminated safety glass at operators door and side panel
dmg mori netservice - client dmg mori netservice - client qualified support by internet-based remote diagnostics will be installed on an external pc!
special equipment preparation ph 150-8 - automatic lift door at the front cabin side - 4-channel media feed to thestarr table - standard electrical interfaceprofibus with dnc extension of dmg mori systems * pneumatic control u. monitoring the zero point clamping syst
.gif" alt="Land-

general
precision centre - linear drive package - active cooling for spindle, linear drives and electrical cabinet - frame temperatur control - direct measuring system - chiptray, coolant/airblast changing - full cabin including 2nd door; control: 3d-control siemens 840d sl operate
technical data
spindle taper hsk-a 63
feed rate longitudinal/transverse/vertical 1-80000/1-80000/1-80000 mm/min
rapid traverse longitudinal/transverse/vertical 80/80/80 m/min
working area 1
longitudinal 650 mm
cross 600 mm
vertical 380 mm
tool changer
type of magazine chain
type of gripper double gripper
number of tools 120
floor space/weight
dimensions (l x w x h) 7,28 x 6,63 x 3 m
weight approx. 9600 kg


rigid table rigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbs
spindle speed up to 28,000rpm shaft cooling spindle speed 20 up to 28,000 rpm within shaft cooling inclusive mpc machine protection control (differently from standard)
drive power (100% dc) 20 kw
drive power (40% dc) 30 kw
speed range 20 - 28000 rpm
spindle taper hsk-a 63
chain-type tool magazine 120 pockets werkzeugmagazin 120 plätze kettenmagazin mit doppelgreifer
infrared measuring probe ts 649 infrared touch probe make heidenhain ts 649
tool measuring blum laser tool measuring blum laser non-contact optical tool measuring system including calibration tool
signal lamp 4-colour signal lamp 4-colour red: general error yellow: intervention necessary green: automatic mode blue: set-up mode
production package 980l ics coolant tempering production package coolant tempered with internal coolant supply (ics) special coolant temperature control for more kinematic stability. including paperband filter, coolant tempering and stirring device, swarf conveyor (scraper type) 40 bar/23 l/min/ 980
air blast through spindle centre dry air blast through spindle centre (dry) activated by m function, (up 28.000rpm and higher)
high-speed-settings high-speed-settings selection of the optimal milling mode for the next machining-step.
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area. release after check list has been filled in.
safety glass at operators door and side panel laminated safety glass at operators door and side panel
dmg mori netservice - client dmg mori netservice - client qualified support by internet-based remote diagnostics will be installed on an external pc!
special equipment preparation ph 150-8 - automatic lift door at the front cabin side - 4-channel media feed to thestarr table - standard electrical interfaceprofibus with dnc extension of dmg mori systems * pneumatic control u. monitoring the zero point clamping syst
" style="height: 18px;">

GENERAL
PRECISION CENTRE - LINEAR DRIVE PACKAGE - ACTIVE COOLING FOR SPINDLE, LINEAR DRIVES AND ELECTRICAL CABINET - FRAME TEMPERATUR CONTROL - DIRECT MEASURING SYSTEM - CHIPTRAY, COOLANT/AIRBLAST CHANGING - FULL CABIN INCLUDING 2ND DOOR; CONTROL: 3D-CONTROL SIEMENS 840D SL OPERATE
TECHNICAL DATA
SPINDLE TAPER HSK-A 63
FEED RATE LONGITUDINAL/TRANSVERSE/VERTICAL 1-80000/1-80000/1-80000 MM/MIN
RAPID TRAVERSE LONGITUDINAL/TRANSVERSE/VERTICAL 80/80/80 M/MIN
WORKING AREA 1
LONGITUDINAL 650 MM
CROSS 600 MM
VERTICAL 380 MM
TOOL CHANGER
TYPE OF MAGAZINE CHAIN
TYPE OF GRIPPER DOUBLE GRIPPER
NUMBER OF TOOLS 120
FLOOR SPACE/WEIGHT
DIMENSIONS (L X W X H) 7,28 X 6,63 X 3 M
WEIGHT APPROX. 9600 KG


RIGID TABLE RIGID TABLE CLAMPING AREA 850 X 600 MM // 33,46 X 23,62 INCH LOADING WEIGHT MAX. 700 KG // 1543,23 LBS
SPINDLE SPEED UP TO 28,000RPM SHAFT COOLING SPINDLE SPEED 20 UP TO 28,000 RPM WITHIN SHAFT COOLING INCLUSIVE MPC MACHINE PROTECTION CONTROL (DIFFERENTLY FROM STANDARD)
DRIVE POWER (100% DC) 20 KW
DRIVE POWER (40% DC) 30 KW
SPEED RANGE 20 - 28000 RPM
SPINDLE TAPER HSK-A 63
CHAIN-TYPE TOOL MAGAZINE 120 POCKETS WERKZEUGMAGAZIN 120 PLäTZE KETTENMAGAZIN MIT DOPPELGREIFER
INFRARED MEASURING PROBE TS 649 INFRARED TOUCH PROBE MAKE HEIDENHAIN TS 649
TOOL MEASURING BLUM LASER TOOL MEASURING BLUM LASER NON-CONTACT OPTICAL TOOL MEASURING SYSTEM INCLUDING CALIBRATION TOOL
SIGNAL LAMP 4-COLOUR SIGNAL LAMP 4-COLOUR RED: GENERAL ERROR YELLOW: INTERVENTION NECESSARY GREEN: AUTOMATIC MODE BLUE: SET-UP MODE
PRODUCTION PACKAGE 980L ICS COOLANT TEMPERING PRODUCTION PACKAGE COOLANT TEMPERED WITH INTERNAL COOLANT SUPPLY (ICS) SPECIAL COOLANT TEMPERATURE CONTROL FOR MORE KINEMATIC STABILITY. INCLUDING PAPERBAND FILTER, COOLANT TEMPERING AND STIRRING DEVICE, SWARF CONVEYOR (SCRAPER TYPE) 40 BAR/23 L/MIN/ 980
AIR BLAST THROUGH SPINDLE CENTRE DRY AIR BLAST THROUGH SPINDLE CENTRE (DRY) ACTIVATED BY M FUNCTION, (UP 28.000RPM AND HIGHER)
HIGH-SPEED-SETTINGS HIGH-SPEED-SETTINGS SELECTION OF THE OPTIMAL MILLING MODE FOR THE NEXT MACHINING-STEP.
OPERATION MODE 4 OPERATION MODE 4 PROCESS MONITORING IN THE PRODUCTION MANUAL INTERVENTION WITH OPEN DOORS OF MACHINING AREA. RELEASE AFTER CHECK LIST HAS BEEN FILLED IN.
SAFETY GLASS AT OPERATORS DOOR AND SIDE PANEL LAMINATED SAFETY GLASS AT OPERATORS DOOR AND SIDE PANEL
DMG MORI NETSERVICE - CLIENT DMG MORI NETSERVICE - CLIENT QUALIFIED SUPPORT BY INTERNET-BASED REMOTE DIAGNOSTICS WILL BE INSTALLED ON AN EXTERNAL PC!
SPECIAL EQUIPMENT PREPARATION PH 150-8 - AUTOMATIC LIFT DOOR AT THE FRONT CABIN SIDE - 4-CHANNEL MEDIA FEED TO THESTARR TABLE - STANDARD ELECTRICAL INTERFACEPROFIBUS WITH DNC EXTENSION OF DMG MORI SYSTEMS * PNEUMATIC CONTROL U. MONITORING THE ZERO POINT CLAMPING SYST
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-control siemens... 802 d si
turning diameter... 1600mm
turning length... 12000mm
spindle bore... 110mm
power of main engine... 99, 5kw

in very good condition, possible to try out under power.  CONTROL SIEMENS... 802 D SI TURNING DIAMETER... 1600MM TURNING LENGTH... 12000MM SPINDLE BORE... 110MM POWER OF MAIN ENGINE... 99, 5KW IN VERY GOOD CONDITION, POSSIBLE TO TRY OUT UNDER POWER.
Vendedor: Herr Radek Procházka
Año de construcción: usado
Ubicación:
general
horizontal machining centre - horizontal milling head; control: 3d control siemens 840d solutionline operate
technical data
feed rate longitudinal/transverse/vertical 100000/80000/100000 mm/min
rapid traverse longitudinal/transverse/vertical 100/80/100 m/min
working area 1
longitudinal 800 mm
cross 1050 mm
vertical 900 mm


cabine full protection cabin
direct measuring system direct path measuring system
nc rotary table with pallet changer type of measuring system direct measuring system
table surface 630 x 630 mm
centre bore 50 mm
motor spindle 18,000 rpm motor spindle hsk-a63 spindle speed 20 - 18,000 min-1 output 34 kw / 28 kw (46 hp / 37 hp) torque 110 nm / 84 nm (81 ft lbs / 62 ft lbs) (40 / 100 % duty cycle)
4. axes (swivelling range) 360 x 0,001 degree
rotation speed max.4. axis 40 rpm
distance between t-slots 100 mm
number of slots 5
slot width 14 mm
maximum load (table centre) 900 kg
taper cleaning brushes taper cleaning unit with rotating brushes for spindle taper hsk
clamping hydraulics 4/7 channels clamping hydraulics 4/7 channels for working table / set-up station for connection of hydraulic clamping devices incl. pallet preparation basic machine
tool magazine, wheel, 63 pockets hsk-a63 tool magazine wheel magazine (1 wheel) with 63 tool pockets hsk-a63
infrared measuring probe renishaw hsk-a 63 infrared measuring probe type renishaw omp 60 hsk-a 63
operation panel for loading station tool magazine control panel for loading station tool magazine with tft screen 15 input on softkeys / alpha-numeric keyboard on touch screen windows 7 embedded
production package 80 bar, frequency controlled scraper flight conveyor with coolant unit 980 l, paper band filter discharge hight 950 mm width 380 mm internal coolant supply, frequency controlled 10 bar/37l/min - 80 bar/31 l/min - through spindle centre (ad) external coolant supply 4 bar/40 l/min (
coolant tempering coolant temperature control for internal coolant supply 980 l / 259 gallon heating power max.: 4,000 w cooling power max.: 4,000 w
rotating clear-view window rotating clear-view window cabin door
spray pistol with pump spray pistol with pump 2 bar/40 l/min 29 psi/10.4 gallon/min (theoretical pump performance)
oil and emulsion mist separator oil and emulsion mist separator mechanical filter throughput volume 1,100 m³/h
tool breakage control mechanical tool breakage control mechanical version
laminated safety glass laminated safety glass for window in right cabin door
mpc machine protection control mpc machine protection control machine protection by quick shutdown
tool identification (tds) tool identification (tool dialogue system tds) type balluff, data carrier bis c-122 reading/writing manually, without contact with a chip for spindle tapers hsk-a 63; hsk-a 100
dmg wake up dmg wake up time-controlled re-switch-on of the machine
dmg mori service agent dmg mori service agent warning in advance - service on time
dmg netservice - client dmg netservice - client green light for your machine will be installed on an external pc!
special equipment - measuring system heidenhain instead of magnescale - electric cabinet with light - fluidboxdoor - pad control for 4/7 clamping hydraulics additional pushbutton on the control panel
.gif" alt="Land-

general
horizontal machining centre - horizontal milling head; control: 3d control siemens 840d solutionline operate
technical data
feed rate longitudinal/transverse/vertical 100000/80000/100000 mm/min
rapid traverse longitudinal/transverse/vertical 100/80/100 m/min
working area 1
longitudinal 800 mm
cross 1050 mm
vertical 900 mm


cabine full protection cabin
direct measuring system direct path measuring system
nc rotary table with pallet changer type of measuring system direct measuring system
table surface 630 x 630 mm
centre bore 50 mm
motor spindle 18,000 rpm motor spindle hsk-a63 spindle speed 20 - 18,000 min-1 output 34 kw / 28 kw (46 hp / 37 hp) torque 110 nm / 84 nm (81 ft lbs / 62 ft lbs) (40 / 100 % duty cycle)
4. axes (swivelling range) 360 x 0,001 degree
rotation speed max.4. axis 40 rpm
distance between t-slots 100 mm
number of slots 5
slot width 14 mm
maximum load (table centre) 900 kg
taper cleaning brushes taper cleaning unit with rotating brushes for spindle taper hsk
clamping hydraulics 4/7 channels clamping hydraulics 4/7 channels for working table / set-up station for connection of hydraulic clamping devices incl. pallet preparation basic machine
tool magazine, wheel, 63 pockets hsk-a63 tool magazine wheel magazine (1 wheel) with 63 tool pockets hsk-a63
infrared measuring probe renishaw hsk-a 63 infrared measuring probe type renishaw omp 60 hsk-a 63
operation panel for loading station tool magazine control panel for loading station tool magazine with tft screen 15 input on softkeys / alpha-numeric keyboard on touch screen windows 7 embedded
production package 80 bar, frequency controlled scraper flight conveyor with coolant unit 980 l, paper band filter discharge hight 950 mm width 380 mm internal coolant supply, frequency controlled 10 bar/37l/min - 80 bar/31 l/min - through spindle centre (ad) external coolant supply 4 bar/40 l/min (
coolant tempering coolant temperature control for internal coolant supply 980 l / 259 gallon heating power max.: 4,000 w cooling power max.: 4,000 w
rotating clear-view window rotating clear-view window cabin door
spray pistol with pump spray pistol with pump 2 bar/40 l/min 29 psi/10.4 gallon/min (theoretical pump performance)
oil and emulsion mist separator oil and emulsion mist separator mechanical filter throughput volume 1,100 m³/h
tool breakage control mechanical tool breakage control mechanical version
laminated safety glass laminated safety glass for window in right cabin door
mpc machine protection control mpc machine protection control machine protection by quick shutdown
tool identification (tds) tool identification (tool dialogue system tds) type balluff, data carrier bis c-122 reading/writing manually, without contact with a chip for spindle tapers hsk-a 63; hsk-a 100
dmg wake up dmg wake up time-controlled re-switch-on of the machine
dmg mori service agent dmg mori service agent warning in advance - service on time
dmg netservice - client dmg netservice - client green light for your machine will be installed on an external pc!
special equipment - measuring system heidenhain instead of magnescale - electric cabinet with light - fluidboxdoor - pad control for 4/7 clamping hydraulics additional pushbutton on the control panel
" style="height: 18px;">

GENERAL
HORIZONTAL MACHINING CENTRE - HORIZONTAL MILLING HEAD; CONTROL: 3D CONTROL SIEMENS 840D SOLUTIONLINE OPERATE
TECHNICAL DATA
FEED RATE LONGITUDINAL/TRANSVERSE/VERTICAL 100000/80000/100000 MM/MIN
RAPID TRAVERSE LONGITUDINAL/TRANSVERSE/VERTICAL 100/80/100 M/MIN
WORKING AREA 1
LONGITUDINAL 800 MM
CROSS 1050 MM
VERTICAL 900 MM


CABINE FULL PROTECTION CABIN
DIRECT MEASURING SYSTEM DIRECT PATH MEASURING SYSTEM
NC ROTARY TABLE WITH PALLET CHANGER TYPE OF MEASURING SYSTEM DIRECT MEASURING SYSTEM
TABLE SURFACE 630 X 630 MM
CENTRE BORE 50 MM
MOTOR SPINDLE 18,000 RPM MOTOR SPINDLE HSK-A63 SPINDLE SPEED 20 - 18,000 MIN-1 OUTPUT 34 KW / 28 KW (46 HP / 37 HP) TORQUE 110 NM / 84 NM (81 FT LBS / 62 FT LBS) (40 / 100 % DUTY CYCLE)
4. AXES (SWIVELLING RANGE) 360 X 0,001 DEGREE
ROTATION SPEED MAX.4. AXIS 40 RPM
DISTANCE BETWEEN T-SLOTS 100 MM
NUMBER OF SLOTS 5
SLOT WIDTH 14 MM
MAXIMUM LOAD (TABLE CENTRE) 900 KG
TAPER CLEANING BRUSHES TAPER CLEANING UNIT WITH ROTATING BRUSHES FOR SPINDLE TAPER HSK
CLAMPING HYDRAULICS 4/7 CHANNELS CLAMPING HYDRAULICS 4/7 CHANNELS FOR WORKING TABLE / SET-UP STATION FOR CONNECTION OF HYDRAULIC CLAMPING DEVICES INCL. PALLET PREPARATION BASIC MACHINE
TOOL MAGAZINE, WHEEL, 63 POCKETS HSK-A63 TOOL MAGAZINE WHEEL MAGAZINE (1 WHEEL) WITH 63 TOOL POCKETS HSK-A63
INFRARED MEASURING PROBE RENISHAW HSK-A 63 INFRARED MEASURING PROBE TYPE RENISHAW OMP 60 HSK-A 63
OPERATION PANEL FOR LOADING STATION TOOL MAGAZINE CONTROL PANEL FOR LOADING STATION TOOL MAGAZINE WITH TFT SCREEN 15 INPUT ON SOFTKEYS / ALPHA-NUMERIC KEYBOARD ON TOUCH SCREEN WINDOWS 7 EMBEDDED
PRODUCTION PACKAGE 80 BAR, FREQUENCY CONTROLLED SCRAPER FLIGHT CONVEYOR WITH COOLANT UNIT 980 L, PAPER BAND FILTER DISCHARGE HIGHT 950 MM WIDTH 380 MM INTERNAL COOLANT SUPPLY, FREQUENCY CONTROLLED 10 BAR/37L/MIN - 80 BAR/31 L/MIN - THROUGH SPINDLE CENTRE (AD) EXTERNAL COOLANT SUPPLY 4 BAR/40 L/MIN (
COOLANT TEMPERING COOLANT TEMPERATURE CONTROL FOR INTERNAL COOLANT SUPPLY 980 L / 259 GALLON HEATING POWER MAX.: 4,000 W COOLING POWER MAX.: 4,000 W
ROTATING CLEAR-VIEW WINDOW ROTATING CLEAR-VIEW WINDOW CABIN DOOR
SPRAY PISTOL WITH PUMP SPRAY PISTOL WITH PUMP 2 BAR/40 L/MIN 29 PSI/10.4 GALLON/MIN (THEORETICAL PUMP PERFORMANCE)
OIL AND EMULSION MIST SEPARATOR OIL AND EMULSION MIST SEPARATOR MECHANICAL FILTER THROUGHPUT VOLUME 1,100 M³/H
TOOL BREAKAGE CONTROL MECHANICAL TOOL BREAKAGE CONTROL MECHANICAL VERSION
LAMINATED SAFETY GLASS LAMINATED SAFETY GLASS FOR WINDOW IN RIGHT CABIN DOOR
MPC MACHINE PROTECTION CONTROL MPC MACHINE PROTECTION CONTROL MACHINE PROTECTION BY QUICK SHUTDOWN
TOOL IDENTIFICATION (TDS) TOOL IDENTIFICATION (TOOL DIALOGUE SYSTEM TDS) TYPE BALLUFF, DATA CARRIER BIS C-122 READING/WRITING MANUALLY, WITHOUT CONTACT WITH A CHIP FOR SPINDLE TAPERS HSK-A 63; HSK-A 100
DMG WAKE UP DMG WAKE UP TIME-CONTROLLED RE-SWITCH-ON OF THE MACHINE
DMG MORI SERVICE AGENT DMG MORI SERVICE AGENT WARNING IN ADVANCE - SERVICE ON TIME
DMG NETSERVICE - CLIENT DMG NETSERVICE - CLIENT GREEN LIGHT FOR YOUR MACHINE WILL BE INSTALLED ON AN EXTERNAL PC!
SPECIAL EQUIPMENT - MEASURING SYSTEM HEIDENHAIN INSTEAD OF MAGNESCALE - ELECTRIC CABINET WITH LIGHT - FLUIDBOXDOOR - PAD CONTROL FOR 4/7 CLAMPING HYDRAULICS ADDITIONAL PUSHBUTTON ON THE CONTROL PANEL
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-bitzer / alfa laval l7sw1s12pp

product number:m19-4335
cooling capacity:930 kw
refrigerant:nh3/r717
refrigerant content:80 kg
voltage:400 volt
motor power:250 kw
dimensions:9.000x3.000x2.600 mm
weight:13.500 kg
year:2014
number in stock:4 piece(s)
price:quotation request

very nice and young bitzer water-cooled ammonia water chiller(s) built in a machine-room container with mechanical cooling. this bitzer chiller consists of a frequency controlled bitzer screw compressor (brand danfoss), weg electric motor 250 kw, horizontal oil separator, oil cooler, combined economiser/liquid separator, alfa laval plate heat exchanger evaporator, alfa laval plate heat exchanger condenser, grundfos speed controlled pumps and a control cabinet with siemens plc and touch screen.
the above mentioned capacity is at +18/12°c in/out and a flow rate of 143,7 m3/h. and a cooling water supply +40°c in (out +48°c) and flow rate of 119,5 m3/h. both cold water and cooling water are filled with 30% glycol. for the layout drawing, p&id and name plates of the chiller see pdf!
if you want additional information, you can send us an email or call us.

please also visit our website: used-refrigeration   BITZER / ALFA LAVAL L7SW1S12PP PRODUCT NUMBER:M19-4335 COOLING CAPACITY:930 KW REFRIGERANT:NH3/R717 REFRIGERANT CONTENT:80 KG VOLTAGE:400 VOLT MOTOR POWER:250 KW DIMENSIONS:9.000X3.000X2.600 MM WEIGHT:13.500 KG YEAR:2014 NUMBER IN STOCK:4 PIECE(S) PRICE:QUOTATION REQUEST VERY NICE AND YOUNG BITZER WATER-COOLED AMMONIA WATER CHILLER(S) BUILT IN A MACHINE-ROOM CONTAINER WITH MECHANICAL COOLING. THIS BITZER CHILLER CONSISTS OF A FREQUENCY CONTROLLED BITZER SCREW COMPRESSOR (BRAND DANFOSS), WEG ELECTRIC MOTOR 250 KW, HORIZONTAL OIL SEPARATOR, OIL COOLER, COMBINED ECONOMISER/LIQUID SEPARATOR, ALFA LAVAL PLATE HEAT EXCHANGER EVAPORATOR, ALFA LAVAL PLATE HEAT EXCHANGER CONDENSER, GRUNDFOS SPEED CONTROLLED PUMPS AND A CONTROL CABINET WITH SIEMENS PLC AND TOUCH SCREEN. THE ABOVE MENTIONED CAPACITY IS AT +18/12°C IN/OUT AND A FLOW RATE OF 143,7 M3/H. AND A COOLING WATER SUPPLY +40°C IN (OUT +48°C) AND FLOW RATE OF 119,5 M3/H. BOTH COLD WATER AND COOLING WATER ARE FILLED WITH 30% GLYCOL. FOR THE LAYOUT DRAWING, P&ID AND NAME PLATES OF THE CHILLER SEE PDF! IF YOU WANT ADDITIONAL INFORMATION, YOU CAN SEND US AN EMAIL OR CALL US. PLEASE ALSO VISIT OUR WEBSITE: USED-REFRIGERATION
Vendedor: VRT International B.V.
Año de construcción: usado
Ubicación:
general
horizontal machining centre in travelling column construction; control: 3d control siemens 840d solutionline operate
technical data
feed rate longitudinal/transverse/vertical 100000/100000/100000 mm/min
rapid traverse longitudinal/transverse/vertical 100/100/100 m/min
working area 1
longitudinal 630 mm
cross 750 mm
vertical 800 mm


cabine full protection cabin
direct measuring system direct path measuring system
nc swivel rotary table nc swivel rotary table with pallet carrier max. table load: 400 kg / 882 lbs rotation b axis: 360° swivel range a axis: 25° / -200° range x / y / z - axis 630 x 800 x 750 mm/24.8 x 31.5 x 29.5 in axis kinematics a / b (basic machine without nc rotary
clamping hydraulics 2/4 channels f. working table/setup station clamping hydraulics 2/4 channels for working table / set-up station for connection of hydraulic clamping devices incl. pallet preparation basic machine
motor spindle 20,000 rpm motor spindle speedmaster® hsk-a 63 spindle speed 20 - 20,000 min-1 output 35 kw / 25 kw (47 hp / 33 hp) torque 130 nm / 86 nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
taper cleaning brushes taper cleaning unit with rotating brushes for spindle taper hsk
tool magazine, wheel, 123 pockets hsk-a63 tool magazine wheel magazine (2 wheels) with 123 tool pockets hsk-a63
operation panel for loading station tool magazine control panel for loading station tool magazine with tft screen 15 input on softkeys / alpha-numeric keyboard on touch screen windows 7 embedded
infrared measuring probe renishaw hsk-a 63 infrared measuring probe type renishaw omp 60 hsk-a 63
tool breakage control mechanical tool breakage control mechanical version
mpc machine protection control mpc machine protection control machine protection by quick shutdown
production package 80 bar, frequency controlled scraper flight conveyor with coolant unit 980 l, paper band filter discharge hight 950 mm width 380 mm internal coolant supply, frequency controlled 10 bar/37l/min - 80 bar/31 l/min - through spindle centre (ad) external coolant supply 4 bar/40 l/min (
coolant tempering coolant temperature control for internal coolant supply 980 l / 259 gallon heating power max.: 3,000 w / 4 hp cooling power max.: 3,800 w / 5.1 hp
rotating clear-view window rotating clear-view window cabin door
spray pistol with pump spray pistol with pump 2 bar/40 l/min 29 psi/10.4 gallon/min (theoretical pump performance)
oil and emulsion mist separator oil and emulsion mist separator mechanical filter throughput volume 1,100 m³/h
cooling cooling by air blast through spindle centre, selection with m function
mdynamics package deckel maho package mdynamics improved surface quality combined with reduced machining time
interpolation turning interpolation turning turning-recessing cycle manufacture of simple sealing surfaces and grooves using machining centres
application tuning cycle atc application tuning cycle atc programmable feed parameter selection for machining task: accuracy/surface/speed
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area release after completed check list
dmg mori service agent dmg mori service agent warning in advance - service on time
dmg mori messenger dmg mori messenger installation kit for the connection of one machine.
dmg mori netservice - client dmg mori netservice - client qualified support by internet-based remote diagnostics will be installed on an external pc!
special equipment screws on calcite white: galvanized screws screws on titanium gray: black screws tidy roofs (clean cables and hose laying) partition wall of pallet changer in glass lighting in the tool magazine room paint cover cabinet cooling units in machine color
special equipment celos control panel connection analog incl. dmg mori wake up version ba4, deselection via machine constants spindle with sensor package i4.0 - mpc 2.0 incl. process-related torque monitoring - sgs - ikz flow switch - sis install 3d quickset extension p
.gif" alt="Land-

general
horizontal machining centre in travelling column construction; control: 3d control siemens 840d solutionline operate
technical data
feed rate longitudinal/transverse/vertical 100000/100000/100000 mm/min
rapid traverse longitudinal/transverse/vertical 100/100/100 m/min
working area 1
longitudinal 630 mm
cross 750 mm
vertical 800 mm


cabine full protection cabin
direct measuring system direct path measuring system
nc swivel rotary table nc swivel rotary table with pallet carrier max. table load: 400 kg / 882 lbs rotation b axis: 360° swivel range a axis: 25° / -200° range x / y / z - axis 630 x 800 x 750 mm/24.8 x 31.5 x 29.5 in axis kinematics a / b (basic machine without nc rotary
clamping hydraulics 2/4 channels f. working table/setup station clamping hydraulics 2/4 channels for working table / set-up station for connection of hydraulic clamping devices incl. pallet preparation basic machine
motor spindle 20,000 rpm motor spindle speedmaster® hsk-a 63 spindle speed 20 - 20,000 min-1 output 35 kw / 25 kw (47 hp / 33 hp) torque 130 nm / 86 nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
taper cleaning brushes taper cleaning unit with rotating brushes for spindle taper hsk
tool magazine, wheel, 123 pockets hsk-a63 tool magazine wheel magazine (2 wheels) with 123 tool pockets hsk-a63
operation panel for loading station tool magazine control panel for loading station tool magazine with tft screen 15 input on softkeys / alpha-numeric keyboard on touch screen windows 7 embedded
infrared measuring probe renishaw hsk-a 63 infrared measuring probe type renishaw omp 60 hsk-a 63
tool breakage control mechanical tool breakage control mechanical version
mpc machine protection control mpc machine protection control machine protection by quick shutdown
production package 80 bar, frequency controlled scraper flight conveyor with coolant unit 980 l, paper band filter discharge hight 950 mm width 380 mm internal coolant supply, frequency controlled 10 bar/37l/min - 80 bar/31 l/min - through spindle centre (ad) external coolant supply 4 bar/40 l/min (
coolant tempering coolant temperature control for internal coolant supply 980 l / 259 gallon heating power max.: 3,000 w / 4 hp cooling power max.: 3,800 w / 5.1 hp
rotating clear-view window rotating clear-view window cabin door
spray pistol with pump spray pistol with pump 2 bar/40 l/min 29 psi/10.4 gallon/min (theoretical pump performance)
oil and emulsion mist separator oil and emulsion mist separator mechanical filter throughput volume 1,100 m³/h
cooling cooling by air blast through spindle centre, selection with m function
mdynamics package deckel maho package mdynamics improved surface quality combined with reduced machining time
interpolation turning interpolation turning turning-recessing cycle manufacture of simple sealing surfaces and grooves using machining centres
application tuning cycle atc application tuning cycle atc programmable feed parameter selection for machining task: accuracy/surface/speed
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area release after completed check list
dmg mori service agent dmg mori service agent warning in advance - service on time
dmg mori messenger dmg mori messenger installation kit for the connection of one machine.
dmg mori netservice - client dmg mori netservice - client qualified support by internet-based remote diagnostics will be installed on an external pc!
special equipment screws on calcite white: galvanized screws screws on titanium gray: black screws tidy roofs (clean cables and hose laying) partition wall of pallet changer in glass lighting in the tool magazine room paint cover cabinet cooling units in machine color
special equipment celos control panel connection analog incl. dmg mori wake up version ba4, deselection via machine constants spindle with sensor package i4.0 - mpc 2.0 incl. process-related torque monitoring - sgs - ikz flow switch - sis install 3d quickset extension p
" style="height: 18px;">

GENERAL
HORIZONTAL MACHINING CENTRE IN TRAVELLING COLUMN CONSTRUCTION; CONTROL: 3D CONTROL SIEMENS 840D SOLUTIONLINE OPERATE
TECHNICAL DATA
FEED RATE LONGITUDINAL/TRANSVERSE/VERTICAL 100000/100000/100000 MM/MIN
RAPID TRAVERSE LONGITUDINAL/TRANSVERSE/VERTICAL 100/100/100 M/MIN
WORKING AREA 1
LONGITUDINAL 630 MM
CROSS 750 MM
VERTICAL 800 MM


CABINE FULL PROTECTION CABIN
DIRECT MEASURING SYSTEM DIRECT PATH MEASURING SYSTEM
NC SWIVEL ROTARY TABLE NC SWIVEL ROTARY TABLE WITH PALLET CARRIER MAX. TABLE LOAD: 400 KG / 882 LBS ROTATION B AXIS: 360° SWIVEL RANGE A AXIS: 25° / -200° RANGE X / Y / Z - AXIS 630 X 800 X 750 MM/24.8 X 31.5 X 29.5 IN AXIS KINEMATICS A / B (BASIC MACHINE WITHOUT NC ROTARY
CLAMPING HYDRAULICS 2/4 CHANNELS F. WORKING TABLE/SETUP STATION CLAMPING HYDRAULICS 2/4 CHANNELS FOR WORKING TABLE / SET-UP STATION FOR CONNECTION OF HYDRAULIC CLAMPING DEVICES INCL. PALLET PREPARATION BASIC MACHINE
MOTOR SPINDLE 20,000 RPM MOTOR SPINDLE SPEEDMASTER® HSK-A 63 SPINDLE SPEED 20 - 20,000 MIN-1 OUTPUT 35 KW / 25 KW (47 HP / 33 HP) TORQUE 130 NM / 86 NM (96 FT LBS / 63 FT LBS) (40 / 100 % DUTY CYCLE)
TAPER CLEANING BRUSHES TAPER CLEANING UNIT WITH ROTATING BRUSHES FOR SPINDLE TAPER HSK
TOOL MAGAZINE, WHEEL, 123 POCKETS HSK-A63 TOOL MAGAZINE WHEEL MAGAZINE (2 WHEELS) WITH 123 TOOL POCKETS HSK-A63
OPERATION PANEL FOR LOADING STATION TOOL MAGAZINE CONTROL PANEL FOR LOADING STATION TOOL MAGAZINE WITH TFT SCREEN 15 INPUT ON SOFTKEYS / ALPHA-NUMERIC KEYBOARD ON TOUCH SCREEN WINDOWS 7 EMBEDDED
INFRARED MEASURING PROBE RENISHAW HSK-A 63 INFRARED MEASURING PROBE TYPE RENISHAW OMP 60 HSK-A 63
TOOL BREAKAGE CONTROL MECHANICAL TOOL BREAKAGE CONTROL MECHANICAL VERSION
MPC MACHINE PROTECTION CONTROL MPC MACHINE PROTECTION CONTROL MACHINE PROTECTION BY QUICK SHUTDOWN
PRODUCTION PACKAGE 80 BAR, FREQUENCY CONTROLLED SCRAPER FLIGHT CONVEYOR WITH COOLANT UNIT 980 L, PAPER BAND FILTER DISCHARGE HIGHT 950 MM WIDTH 380 MM INTERNAL COOLANT SUPPLY, FREQUENCY CONTROLLED 10 BAR/37L/MIN - 80 BAR/31 L/MIN - THROUGH SPINDLE CENTRE (AD) EXTERNAL COOLANT SUPPLY 4 BAR/40 L/MIN (
COOLANT TEMPERING COOLANT TEMPERATURE CONTROL FOR INTERNAL COOLANT SUPPLY 980 L / 259 GALLON HEATING POWER MAX.: 3,000 W / 4 HP COOLING POWER MAX.: 3,800 W / 5.1 HP
ROTATING CLEAR-VIEW WINDOW ROTATING CLEAR-VIEW WINDOW CABIN DOOR
SPRAY PISTOL WITH PUMP SPRAY PISTOL WITH PUMP 2 BAR/40 L/MIN 29 PSI/10.4 GALLON/MIN (THEORETICAL PUMP PERFORMANCE)
OIL AND EMULSION MIST SEPARATOR OIL AND EMULSION MIST SEPARATOR MECHANICAL FILTER THROUGHPUT VOLUME 1,100 M³/H
COOLING COOLING BY AIR BLAST THROUGH SPINDLE CENTRE, SELECTION WITH M FUNCTION
MDYNAMICS PACKAGE DECKEL MAHO PACKAGE MDYNAMICS IMPROVED SURFACE QUALITY COMBINED WITH REDUCED MACHINING TIME
INTERPOLATION TURNING INTERPOLATION TURNING TURNING-RECESSING CYCLE MANUFACTURE OF SIMPLE SEALING SURFACES AND GROOVES USING MACHINING CENTRES
APPLICATION TUNING CYCLE ATC APPLICATION TUNING CYCLE ATC PROGRAMMABLE FEED PARAMETER SELECTION FOR MACHINING TASK: ACCURACY/SURFACE/SPEED
OPERATION MODE 4 OPERATION MODE 4 PROCESS MONITORING IN THE PRODUCTION MANUAL INTERVENTION WITH OPEN DOORS OF MACHINING AREA RELEASE AFTER COMPLETED CHECK LIST
DMG MORI SERVICE AGENT DMG MORI SERVICE AGENT WARNING IN ADVANCE - SERVICE ON TIME
DMG MORI MESSENGER DMG MORI MESSENGER INSTALLATION KIT FOR THE CONNECTION OF ONE MACHINE.
DMG MORI NETSERVICE - CLIENT DMG MORI NETSERVICE - CLIENT QUALIFIED SUPPORT BY INTERNET-BASED REMOTE DIAGNOSTICS WILL BE INSTALLED ON AN EXTERNAL PC!
SPECIAL EQUIPMENT SCREWS ON CALCITE WHITE: GALVANIZED SCREWS SCREWS ON TITANIUM GRAY: BLACK SCREWS TIDY ROOFS (CLEAN CABLES AND HOSE LAYING) PARTITION WALL OF PALLET CHANGER IN GLASS LIGHTING IN THE TOOL MAGAZINE ROOM PAINT COVER CABINET COOLING UNITS IN MACHINE COLOR
SPECIAL EQUIPMENT CELOS CONTROL PANEL CONNECTION ANALOG INCL. DMG MORI WAKE UP VERSION BA4, DESELECTION VIA MACHINE CONSTANTS SPINDLE WITH SENSOR PACKAGE I4.0 - MPC 2.0 INCL. PROCESS-RELATED TORQUE MONITORING - SGS - IKZ FLOW SWITCH - SIS INSTALL 3D QUICKSET EXTENSION P
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-tube bending machines; numerically controlled; max aluminum tube diameter 20 mm â?? control fabr. siemens; type simatic hmi; gittereumhausung with safety light barrier TUBE BENDING MACHINES; NUMERICALLY CONTROLLED; MAX ALUMINUM TUBE DIAMETER 20 MM Â?? CONTROL FABR. SIEMENS; TYPE SIMATIC HMI; GITTEREUMHAUSUNG WITH SAFETY LIGHT BARRIER
Vendedor: Troostwijk Auctions
Año de construcción: usado
Ubicación:
general
horizontal machining centre in travelling column construction; control: 3d control siemens 840d solutionline operate
technical data
feed rate longitudinal/transverse/vertical 60000/60000/70000 mm/min
rapid traverse longitudinal/transverse/vertical 60/60/70 m/min
working area 1
longitudinal 630 mm
cross 800 mm
vertical 850 mm


package recirculation ballscrew spindle package recirculating ballscrew spindle x-,z-axis:max. feed speed: 60.000 mm/min y-axis: max. feed speed: 70.000 mm/min (basic machine without linear drive x-, y-, z-axis)
cabine full protection cabin
direct measuring system direct path measuring system
nc rotary table with pallet changer table surface 500 x 500 mm
centre bore 20 mm
maximum load (table centre) 600 kg
slot width 14 mm
number of slots 5
distance between t-slots 100 mm
rotation speed max.4. axis 40 rpm
4. axes (swivelling range) 360 x 0,001 degree
clamping hydraulics 2/4 channels f. working table/setup station clamping hydraulics 2/4 channels for working table / set-up station for connection of hydraulic clamping devices incl. pallet preparation basic machine
motor spindle hsk-a63 18,000 rpm drive power (100% dc) 28 kw
drive power (40% dc) 34 kw
torque (100% dc) 84 nm
torque (40% dc) 110 nm
speed range - 18000 rpm
spindle taper hsk-a 63
taper cleaning brushes taper cleaning unit with rotating brushes for spindle taper hsk
tool magazine, wheel, 123 pockets hsk-a63 tool magazine wheel magazine (2 wheels) with 123 tool pockets hsk-a63
operation panel for loading station tool magazine control panel for loading station tool magazine with tft screen 15 input on softkeys / alpha-numeric keyboard on touch screen windows 7 embedded
tool breakage control mechanical tool breakage control mechanical version
production package 80 bar, frequency controlled scraper flight conveyor with coolant unit 980 l, paper band filter discharge hight 950 mm width 380 mm internal coolant supply, frequency controlled 10 bar/37l/min - 80 bar/31 l/min - through spindle centre (ad) external coolant supply 4 bar/40 l/min (
coolant cooling coolant cooling for internal coolant supply 980 l / 259 gallon cooling power max.: 3,800 w / 5.1 hp
spray pistol with pump spray pistol with pump 2 bar/40 l/min 29 psi/10.4 gallon/min (theoretical pump performance)
oil and emulsion mist separator oil and emulsion mist separator mechanical filter throughput volume 1,100 m³/h
special equipment torque arm deckel maho standard three-point support handover oiled air
.gif" alt="Land-

general
horizontal machining centre in travelling column construction; control: 3d control siemens 840d solutionline operate
technical data
feed rate longitudinal/transverse/vertical 60000/60000/70000 mm/min
rapid traverse longitudinal/transverse/vertical 60/60/70 m/min
working area 1
longitudinal 630 mm
cross 800 mm
vertical 850 mm


package recirculation ballscrew spindle package recirculating ballscrew spindle x-,z-axis:max. feed speed: 60.000 mm/min y-axis: max. feed speed: 70.000 mm/min (basic machine without linear drive x-, y-, z-axis)
cabine full protection cabin
direct measuring system direct path measuring system
nc rotary table with pallet changer table surface 500 x 500 mm
centre bore 20 mm
maximum load (table centre) 600 kg
slot width 14 mm
number of slots 5
distance between t-slots 100 mm
rotation speed max.4. axis 40 rpm
4. axes (swivelling range) 360 x 0,001 degree
clamping hydraulics 2/4 channels f. working table/setup station clamping hydraulics 2/4 channels for working table / set-up station for connection of hydraulic clamping devices incl. pallet preparation basic machine
motor spindle hsk-a63 18,000 rpm drive power (100% dc) 28 kw
drive power (40% dc) 34 kw
torque (100% dc) 84 nm
torque (40% dc) 110 nm
speed range - 18000 rpm
spindle taper hsk-a 63
taper cleaning brushes taper cleaning unit with rotating brushes for spindle taper hsk
tool magazine, wheel, 123 pockets hsk-a63 tool magazine wheel magazine (2 wheels) with 123 tool pockets hsk-a63
operation panel for loading station tool magazine control panel for loading station tool magazine with tft screen 15 input on softkeys / alpha-numeric keyboard on touch screen windows 7 embedded
tool breakage control mechanical tool breakage control mechanical version
production package 80 bar, frequency controlled scraper flight conveyor with coolant unit 980 l, paper band filter discharge hight 950 mm width 380 mm internal coolant supply, frequency controlled 10 bar/37l/min - 80 bar/31 l/min - through spindle centre (ad) external coolant supply 4 bar/40 l/min (
coolant cooling coolant cooling for internal coolant supply 980 l / 259 gallon cooling power max.: 3,800 w / 5.1 hp
spray pistol with pump spray pistol with pump 2 bar/40 l/min 29 psi/10.4 gallon/min (theoretical pump performance)
oil and emulsion mist separator oil and emulsion mist separator mechanical filter throughput volume 1,100 m³/h
special equipment torque arm deckel maho standard three-point support handover oiled air
" style="height: 18px;">

GENERAL
HORIZONTAL MACHINING CENTRE IN TRAVELLING COLUMN CONSTRUCTION; CONTROL: 3D CONTROL SIEMENS 840D SOLUTIONLINE OPERATE
TECHNICAL DATA
FEED RATE LONGITUDINAL/TRANSVERSE/VERTICAL 60000/60000/70000 MM/MIN
RAPID TRAVERSE LONGITUDINAL/TRANSVERSE/VERTICAL 60/60/70 M/MIN
WORKING AREA 1
LONGITUDINAL 630 MM
CROSS 800 MM
VERTICAL 850 MM


PACKAGE RECIRCULATION BALLSCREW SPINDLE PACKAGE RECIRCULATING BALLSCREW SPINDLE X-,Z-AXIS:MAX. FEED SPEED: 60.000 MM/MIN Y-AXIS: MAX. FEED SPEED: 70.000 MM/MIN (BASIC MACHINE WITHOUT LINEAR DRIVE X-, Y-, Z-AXIS)
CABINE FULL PROTECTION CABIN
DIRECT MEASURING SYSTEM DIRECT PATH MEASURING SYSTEM
NC ROTARY TABLE WITH PALLET CHANGER TABLE SURFACE 500 X 500 MM
CENTRE BORE 20 MM
MAXIMUM LOAD (TABLE CENTRE) 600 KG
SLOT WIDTH 14 MM
NUMBER OF SLOTS 5
DISTANCE BETWEEN T-SLOTS 100 MM
ROTATION SPEED MAX.4. AXIS 40 RPM
4. AXES (SWIVELLING RANGE) 360 X 0,001 DEGREE
CLAMPING HYDRAULICS 2/4 CHANNELS F. WORKING TABLE/SETUP STATION CLAMPING HYDRAULICS 2/4 CHANNELS FOR WORKING TABLE / SET-UP STATION FOR CONNECTION OF HYDRAULIC CLAMPING DEVICES INCL. PALLET PREPARATION BASIC MACHINE
MOTOR SPINDLE HSK-A63 18,000 RPM DRIVE POWER (100% DC) 28 KW
DRIVE POWER (40% DC) 34 KW
TORQUE (100% DC) 84 NM
TORQUE (40% DC) 110 NM
SPEED RANGE - 18000 RPM
SPINDLE TAPER HSK-A 63
TAPER CLEANING BRUSHES TAPER CLEANING UNIT WITH ROTATING BRUSHES FOR SPINDLE TAPER HSK
TOOL MAGAZINE, WHEEL, 123 POCKETS HSK-A63 TOOL MAGAZINE WHEEL MAGAZINE (2 WHEELS) WITH 123 TOOL POCKETS HSK-A63
OPERATION PANEL FOR LOADING STATION TOOL MAGAZINE CONTROL PANEL FOR LOADING STATION TOOL MAGAZINE WITH TFT SCREEN 15 INPUT ON SOFTKEYS / ALPHA-NUMERIC KEYBOARD ON TOUCH SCREEN WINDOWS 7 EMBEDDED
TOOL BREAKAGE CONTROL MECHANICAL TOOL BREAKAGE CONTROL MECHANICAL VERSION
PRODUCTION PACKAGE 80 BAR, FREQUENCY CONTROLLED SCRAPER FLIGHT CONVEYOR WITH COOLANT UNIT 980 L, PAPER BAND FILTER DISCHARGE HIGHT 950 MM WIDTH 380 MM INTERNAL COOLANT SUPPLY, FREQUENCY CONTROLLED 10 BAR/37L/MIN - 80 BAR/31 L/MIN - THROUGH SPINDLE CENTRE (AD) EXTERNAL COOLANT SUPPLY 4 BAR/40 L/MIN (
COOLANT COOLING COOLANT COOLING FOR INTERNAL COOLANT SUPPLY 980 L / 259 GALLON COOLING POWER MAX.: 3,800 W / 5.1 HP
SPRAY PISTOL WITH PUMP SPRAY PISTOL WITH PUMP 2 BAR/40 L/MIN 29 PSI/10.4 GALLON/MIN (THEORETICAL PUMP PERFORMANCE)
OIL AND EMULSION MIST SEPARATOR OIL AND EMULSION MIST SEPARATOR MECHANICAL FILTER THROUGHPUT VOLUME 1,100 M³/H
SPECIAL EQUIPMENT TORQUE ARM DECKEL MAHO STANDARD THREE-POINT SUPPORT HANDOVER OILED AIR
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-glass bottle filling line krones one way 54.000 bph
 
complete line for bottling beer, carbonated and non carbonated soft drinks in one way glass bottles at nominal capacity of 54 000 bph. it was delivered by krones in year 2000 and it was in operation till 2015 and is currently installed and powered. equipment is very well maintaned and it has a complete techncial documentation in english.
 
main characteristics
- capacity 54 000 bph at 0.33 liter bottles
- made by krones in year 2000, in operation till 2015 still installed
- bottle volumes 275, 330 ml and earlier also 660 ml bottles
- total operating hours approx 70.000
- one way line for new glass bottles
- secondary packaging kisters wraparound packer and khs innopac wsp a-m combi packer
- operation controls made with siemens simatic s7 plc system
- overall line efficiency 75 %

list of main equipment:

1. empty bottle pallet transport conveyor system, kensal, year 2010
2. empty bottle depalletiser, kettner pressant universal
- capacity 100 pallets / hour
- layer interleave removal device
- empty pallet stacking device, type 454, model lpmt with max 15 pallet magazine
- empty pallet transport conveyor system
3. empty bottle transport conveyors (mass flow), krones
4. empty bottle transport conveyors/reject lane (single file), krones
5. zero pressure single filer, krones
6. empty bottle inspector krones linatronic
7. filler monobloc (rinser-filler-capper) krones mecafill vk(2v)cf
- short tube filling system for beer and soft drinks with double pre-evacuation before filling
- 132 filling valves, two maxicrown (year 2007) 26 capping stations, one for crown and one for twist off caps
- maxicrown cap feeding system
- inbuilt monoblock cip system
- valve block with buffer tank
- change parts for all bottles sizes
8. full bottle transport conveyor system (filler - pasteuriser), krones
9. full bottle inspector krones checkmat type 707 with swing-push rejection
10. tunnel pasteuriser, sander hansen pb 17.9-504-42, machine number 622
- it has 7 zones total, 4 pasteurization and 3 regerative zones
- total process area 240 m2
- the pasteurizer was refurbished one year ago and it has new martahoon plastic betls and new gear drives.
11. full bottle transport conveyor system (pasteuriser - labellers), krones
12. two bottle driers (air knives)
13. two labelers krones solomatic 018-g88
- combined output between 54.000 bph
- cold glue system, both with two label stations for ready cut paper labels
- rotation l-r and r-l (oposite directions)
- inbuilt no-label checking and rejecting system
- bottle handling change parts and storage racks for parts
14. bottle marking system with
- two videojet inc date coders, model xl 170i uhs af (one for each labeler)
- two domino lazer marker, model dpx1500 digital (one for each labeler)
- two domino digital coder 3, model ddc3l, year 2010 (one for each labeler)
15. two label inspectors, krones checkmat type 707 (one for each line)
16. full bottle transport conveyor system (labelers - kisters) incl. labeler reject conveyor
17. wraparound packer khs kisters innopac wp 070v, year 2005, 70 cycle per min, various configurations with automatic carton feeding system
18. full bottle transport conveyor system (feeding loose bottles to kister combi)
19. khs combi packer, type innopac wsp a-m, year 2011, machine number k-89403431- 000100, max 58 cycles/min, with automatic carton feeding system
20. two finished pack coders, type videojet
21. two lock & pop device made by nordson, in year 2010
22. finished pack transport conveyors
23. finished pack transport spiral elevator made by ambaflex in 2000
24. related electrical control and mcc panels   GLASS BOTTLE FILLING LINE KRONES ONE WAY 54.000 BPH COMPLETE LINE FOR BOTTLING BEER, CARBONATED AND NON CARBONATED SOFT DRINKS IN ONE WAY GLASS BOTTLES AT NOMINAL CAPACITY OF 54 000 BPH. IT WAS DELIVERED BY KRONES IN YEAR 2000 AND IT WAS IN OPERATION TILL 2015 AND IS CURRENTLY INSTALLED AND POWERED. EQUIPMENT IS VERY WELL MAINTANED AND IT HAS A COMPLETE TECHNCIAL DOCUMENTATION IN ENGLISH. MAIN CHARACTERISTICS - CAPACITY 54 000 BPH AT 0.33 LITER BOTTLES - MADE BY KRONES IN YEAR 2000, IN OPERATION TILL 2015 STILL INSTALLED - BOTTLE VOLUMES 275, 330 ML AND EARLIER ALSO 660 ML BOTTLES - TOTAL OPERATING HOURS APPROX 70.000 - ONE WAY LINE FOR NEW GLASS BOTTLES - SECONDARY PACKAGING KISTERS WRAPAROUND PACKER AND KHS INNOPAC WSP A-M COMBI PACKER - OPERATION CONTROLS MADE WITH SIEMENS SIMATIC S7 PLC SYSTEM - OVERALL LINE EFFICIENCY 75 % LIST OF MAIN EQUIPMENT: 1. EMPTY BOTTLE PALLET TRANSPORT CONVEYOR SYSTEM, KENSAL, YEAR 2010 2. EMPTY BOTTLE DEPALLETISER, KETTNER PRESSANT UNIVERSAL - CAPACITY 100 PALLETS / HOUR - LAYER INTERLEAVE REMOVAL DEVICE - EMPTY PALLET STACKING DEVICE, TYPE 454, MODEL LPMT WITH MAX 15 PALLET MAGAZINE - EMPTY PALLET TRANSPORT CONVEYOR SYSTEM 3. EMPTY BOTTLE TRANSPORT CONVEYORS (MASS FLOW), KRONES 4. EMPTY BOTTLE TRANSPORT CONVEYORS/REJECT LANE (SINGLE FILE), KRONES 5. ZERO PRESSURE SINGLE FILER, KRONES 6. EMPTY BOTTLE INSPECTOR KRONES LINATRONIC 7. FILLER MONOBLOC (RINSER-FILLER-CAPPER) KRONES MECAFILL VK(2V)CF - SHORT TUBE FILLING SYSTEM FOR BEER AND SOFT DRINKS WITH DOUBLE PRE-EVACUATION BEFORE FILLING - 132 FILLING VALVES, TWO MAXICROWN (YEAR 2007) 26 CAPPING STATIONS, ONE FOR CROWN AND ONE FOR TWIST OFF CAPS - MAXICROWN CAP FEEDING SYSTEM - INBUILT MONOBLOCK CIP SYSTEM - VALVE BLOCK WITH BUFFER TANK - CHANGE PARTS FOR ALL BOTTLES SIZES 8. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (FILLER - PASTEURISER), KRONES 9. FULL BOTTLE INSPECTOR KRONES CHECKMAT TYPE 707 WITH SWING-PUSH REJECTION 10. TUNNEL PASTEURISER, SANDER HANSEN PB 17.9-504-42, MACHINE NUMBER 622 - IT HAS 7 ZONES TOTAL, 4 PASTEURIZATION AND 3 REGERATIVE ZONES - TOTAL PROCESS AREA 240 M2 - THE PASTEURIZER WAS REFURBISHED ONE YEAR AGO AND IT HAS NEW MARTAHOON PLASTIC BETLS AND NEW GEAR DRIVES. 11. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (PASTEURISER - LABELLERS), KRONES 12. TWO BOTTLE DRIERS (AIR KNIVES) 13. TWO LABELERS KRONES SOLOMATIC 018-G88 - COMBINED OUTPUT BETWEEN 54.000 BPH - COLD GLUE SYSTEM, BOTH WITH TWO LABEL STATIONS FOR READY CUT PAPER LABELS - ROTATION L-R AND R-L (OPOSITE DIRECTIONS) - INBUILT NO-LABEL CHECKING AND REJECTING SYSTEM - BOTTLE HANDLING CHANGE PARTS AND STORAGE RACKS FOR PARTS 14. BOTTLE MARKING SYSTEM WITH - TWO VIDEOJET INC DATE CODERS, MODEL XL 170I UHS AF (ONE FOR EACH LABELER) - TWO DOMINO LAZER MARKER, MODEL DPX1500 DIGITAL (ONE FOR EACH LABELER) - TWO DOMINO DIGITAL CODER 3, MODEL DDC3L, YEAR 2010 (ONE FOR EACH LABELER) 15. TWO LABEL INSPECTORS, KRONES CHECKMAT TYPE 707 (ONE FOR EACH LINE) 16. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (LABELERS - KISTERS) INCL. LABELER REJECT CONVEYOR 17. WRAPAROUND PACKER KHS KISTERS INNOPAC WP 070V, YEAR 2005, 70 CYCLE PER MIN, VARIOUS CONFIGURATIONS WITH AUTOMATIC CARTON FEEDING SYSTEM 18. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (FEEDING LOOSE BOTTLES TO KISTER COMBI) 19. KHS COMBI PACKER, TYPE INNOPAC WSP A-M, YEAR 2011, MACHINE NUMBER K-89403431- 000100, MAX 58 CYCLES/MIN, WITH AUTOMATIC CARTON FEEDING SYSTEM 20. TWO FINISHED PACK CODERS, TYPE VIDEOJET 21. TWO LOCK & POP DEVICE MADE BY NORDSON, IN YEAR 2010 22. FINISHED PACK TRANSPORT CONVEYORS 23. FINISHED PACK TRANSPORT SPIRAL ELEVATOR MADE BY AMBAFLEX IN 2000 24. RELATED ELECTRICAL CONTROL AND MCC PANELS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación:
technical data
feed rate longitudinal/transverse/vertical 100000/80000/100000 mm/min
rapid traverse longitudinal/transverse/vertical 100/80/100 m/min
general
horizontal machining centre - horizontal milling head - chip trough with integrated coolant tank 300 l / 130 gallo; control: 3d control siemens 840d solutionline operate
working area 1
longitudinal 800 mm
cross 1050 mm
vertical 1095 mm


cabine full protection cabin
direct measuring system direct path measuring system
nc swivel rotary table nc swivel rotary table with pallet carrier max. table load: 600 kg / 1,323 lbs rotation b axis: 360° swivel range a axis: 25° / -200° range x / y / z-axis: 800 x 1,095 x 1,050 mm / 31.5 x 43.1 x 41.3 in axis kinematics a / b
clamping hydraulics 2/4 channels f. working table/setup station clamping hydraulics 2/4 channels for working table / set-up station for connection of hydraulic clamping devices incl. pallet preparation basic machine
motor spindle hsk-a63 18,000 rpm drive power (100% dc) 28 kw
drive power (40% dc) 34 kw
torque (100% dc) 84 nm
speed range - 18000 rpm
torque (40% dc) 110 nm
spindle taper hsk-a 63
tool magazine, wheel, 123 pockets hsk-a63 tool magazine wheel magazine (2 wheels) with 123 tool pockets hsk-a63
mpc machine protection control mpc machine protection control machine protection by quick shutdown
production package 80 bar / 14 l/min, 980 l tank production package: scraper flight conveyor with coolant unit 980 l / 259 gallon, paper band filter discharge hight 950 mm / 37.4 in width 380 mm / 15 in. internal coolant supply 80 bar/14 l/min / 1160 psi/3.7 gal/min through spindle centre (ad) pressure
rotating clear-view window rotating clear-view window cabin door
spray pistol with pump spray pistol with pump 1 bar/40 l/min 14.5 psi/10.4 gallon/min (theoretical pump performance)
cooling cooling by air blast through spindle centre, selection with m function
laminated safety glass laminated safety glass for window in right cabin door
.gif" alt="Land-

technical data
feed rate longitudinal/transverse/vertical 100000/80000/100000 mm/min
rapid traverse longitudinal/transverse/vertical 100/80/100 m/min
general
horizontal machining centre - horizontal milling head - chip trough with integrated coolant tank 300 l / 130 gallo; control: 3d control siemens 840d solutionline operate
working area 1
longitudinal 800 mm
cross 1050 mm
vertical 1095 mm


cabine full protection cabin
direct measuring system direct path measuring system
nc swivel rotary table nc swivel rotary table with pallet carrier max. table load: 600 kg / 1,323 lbs rotation b axis: 360° swivel range a axis: 25° / -200° range x / y / z-axis: 800 x 1,095 x 1,050 mm / 31.5 x 43.1 x 41.3 in axis kinematics a / b
clamping hydraulics 2/4 channels f. working table/setup station clamping hydraulics 2/4 channels for working table / set-up station for connection of hydraulic clamping devices incl. pallet preparation basic machine
motor spindle hsk-a63 18,000 rpm drive power (100% dc) 28 kw
drive power (40% dc) 34 kw
torque (100% dc) 84 nm
speed range - 18000 rpm
torque (40% dc) 110 nm
spindle taper hsk-a 63
tool magazine, wheel, 123 pockets hsk-a63 tool magazine wheel magazine (2 wheels) with 123 tool pockets hsk-a63
mpc machine protection control mpc machine protection control machine protection by quick shutdown
production package 80 bar / 14 l/min, 980 l tank production package: scraper flight conveyor with coolant unit 980 l / 259 gallon, paper band filter discharge hight 950 mm / 37.4 in width 380 mm / 15 in. internal coolant supply 80 bar/14 l/min / 1160 psi/3.7 gal/min through spindle centre (ad) pressure
rotating clear-view window rotating clear-view window cabin door
spray pistol with pump spray pistol with pump 1 bar/40 l/min 14.5 psi/10.4 gallon/min (theoretical pump performance)
cooling cooling by air blast through spindle centre, selection with m function
laminated safety glass laminated safety glass for window in right cabin door
" style="height: 18px;">

TECHNICAL DATA
FEED RATE LONGITUDINAL/TRANSVERSE/VERTICAL 100000/80000/100000 MM/MIN
RAPID TRAVERSE LONGITUDINAL/TRANSVERSE/VERTICAL 100/80/100 M/MIN
GENERAL
HORIZONTAL MACHINING CENTRE - HORIZONTAL MILLING HEAD - CHIP TROUGH WITH INTEGRATED COOLANT TANK 300 L / 130 GALLO; CONTROL: 3D CONTROL SIEMENS 840D SOLUTIONLINE OPERATE
WORKING AREA 1
LONGITUDINAL 800 MM
CROSS 1050 MM
VERTICAL 1095 MM


CABINE FULL PROTECTION CABIN
DIRECT MEASURING SYSTEM DIRECT PATH MEASURING SYSTEM
NC SWIVEL ROTARY TABLE NC SWIVEL ROTARY TABLE WITH PALLET CARRIER MAX. TABLE LOAD: 600 KG / 1,323 LBS ROTATION B AXIS: 360° SWIVEL RANGE A AXIS: 25° / -200° RANGE X / Y / Z-AXIS: 800 X 1,095 X 1,050 MM / 31.5 X 43.1 X 41.3 IN AXIS KINEMATICS A / B
CLAMPING HYDRAULICS 2/4 CHANNELS F. WORKING TABLE/SETUP STATION CLAMPING HYDRAULICS 2/4 CHANNELS FOR WORKING TABLE / SET-UP STATION FOR CONNECTION OF HYDRAULIC CLAMPING DEVICES INCL. PALLET PREPARATION BASIC MACHINE
MOTOR SPINDLE HSK-A63 18,000 RPM DRIVE POWER (100% DC) 28 KW
DRIVE POWER (40% DC) 34 KW
TORQUE (100% DC) 84 NM
SPEED RANGE - 18000 RPM
TORQUE (40% DC) 110 NM
SPINDLE TAPER HSK-A 63
TOOL MAGAZINE, WHEEL, 123 POCKETS HSK-A63 TOOL MAGAZINE WHEEL MAGAZINE (2 WHEELS) WITH 123 TOOL POCKETS HSK-A63
MPC MACHINE PROTECTION CONTROL MPC MACHINE PROTECTION CONTROL MACHINE PROTECTION BY QUICK SHUTDOWN
PRODUCTION PACKAGE 80 BAR / 14 L/MIN, 980 L TANK PRODUCTION PACKAGE: SCRAPER FLIGHT CONVEYOR WITH COOLANT UNIT 980 L / 259 GALLON, PAPER BAND FILTER DISCHARGE HIGHT 950 MM / 37.4 IN WIDTH 380 MM / 15 IN. INTERNAL COOLANT SUPPLY 80 BAR/14 L/MIN / 1160 PSI/3.7 GAL/MIN THROUGH SPINDLE CENTRE (AD) PRESSURE
ROTATING CLEAR-VIEW WINDOW ROTATING CLEAR-VIEW WINDOW CABIN DOOR
SPRAY PISTOL WITH PUMP SPRAY PISTOL WITH PUMP 1 BAR/40 L/MIN 14.5 PSI/10.4 GALLON/MIN (THEORETICAL PUMP PERFORMANCE)
COOLING COOLING BY AIR BLAST THROUGH SPINDLE CENTRE, SELECTION WITH M FUNCTION
LAMINATED SAFETY GLASS LAMINATED SAFETY GLASS FOR WINDOW IN RIGHT CABIN DOOR
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-tunnel pasteurizer krones - sander hansen 50 000 pet /h

this machine was initially delivered and installed in 2007. it is two deck design with 5 pasteurization zones and 5 cooling zones. total treatment area is 276 m2 and heating media is saturated steam 3-9 bars. it has been only used approx 500 working hours for ice water and ice tea in pet bottles. the belts were changed and they have been operated only approx 100 working hours since belt change. the machine has been kept under maintenance and it is in excellent conditions.

technical specifications:

manufacturing year: 2007
make: krones - sander hansen
running hours: approx 500
condition: excellent condition
current location central america
availability: immediately
current status: installed
operating system: siemens s 7 plc, english language
treatment area: 276 m2
weigth (empty): 63.000 kg
weight (full / approx.): 143.00 kg
water volume in zones: 22.7 m3
water volume in buffers: 20 m3
material zones: stainless steel
number of decks: 2
number of belts: 2
number of regenerative zones: 5
number of pasteurization zones: 5
number of additional cooling zones: 1
belt width: 5.58 m
external width (including pumps and ops): 7.68 m
total length (ex. platforms): 27.00 m
platforms (front / back): +1m / side approx.
pump side from infeed: left
type of infeed conveyor: rexnord, 5 track, plastic, 425mm
type of out feed conveyor: rexnord, 5 track, plastic, 425mm
heating media: saturated steam at 3-9 bar, capacity 3370 kw
water – design flow: 85.3 m3/h
air consumption: 5 m3/h
conveyor type: intralox raised rip 400
conveyor status: perfect
conveyor material: polypropylene
main drive: planetary gear
electrical supply, phases: 3
voltage: 460 v ac
tolerances: +/- 10%
frequency: 60 hz   TUNNEL PASTEURIZER KRONES - SANDER HANSEN 50 000 PET /H THIS MACHINE WAS INITIALLY DELIVERED AND INSTALLED IN 2007. IT IS TWO DECK DESIGN WITH 5 PASTEURIZATION ZONES AND 5 COOLING ZONES. TOTAL TREATMENT AREA IS 276 M2 AND HEATING MEDIA IS SATURATED STEAM 3-9 BARS. IT HAS BEEN ONLY USED APPROX 500 WORKING HOURS FOR ICE WATER AND ICE TEA IN PET BOTTLES. THE BELTS WERE CHANGED AND THEY HAVE BEEN OPERATED ONLY APPROX 100 WORKING HOURS SINCE BELT CHANGE. THE MACHINE HAS BEEN KEPT UNDER MAINTENANCE AND IT IS IN EXCELLENT CONDITIONS. TECHNICAL SPECIFICATIONS: MANUFACTURING YEAR: 2007 MAKE: KRONES - SANDER HANSEN RUNNING HOURS: APPROX 500 CONDITION: EXCELLENT CONDITION CURRENT LOCATION CENTRAL AMERICA AVAILABILITY: IMMEDIATELY CURRENT STATUS: INSTALLED OPERATING SYSTEM: SIEMENS S 7 PLC, ENGLISH LANGUAGE TREATMENT AREA: 276 M2 WEIGTH (EMPTY): 63.000 KG WEIGHT (FULL / APPROX.): 143.00 KG WATER VOLUME IN ZONES: 22.7 M3 WATER VOLUME IN BUFFERS: 20 M3 MATERIAL ZONES: STAINLESS STEEL NUMBER OF DECKS: 2 NUMBER OF BELTS: 2 NUMBER OF REGENERATIVE ZONES: 5 NUMBER OF PASTEURIZATION ZONES: 5 NUMBER OF ADDITIONAL COOLING ZONES: 1 BELT WIDTH: 5.58 M EXTERNAL WIDTH (INCLUDING PUMPS AND OPS): 7.68 M TOTAL LENGTH (EX. PLATFORMS): 27.00 M PLATFORMS (FRONT / BACK): +1M / SIDE APPROX. PUMP SIDE FROM INFEED: LEFT TYPE OF INFEED CONVEYOR: REXNORD, 5 TRACK, PLASTIC, 425MM TYPE OF OUT FEED CONVEYOR: REXNORD, 5 TRACK, PLASTIC, 425MM HEATING MEDIA: SATURATED STEAM AT 3-9 BAR, CAPACITY 3370 KW WATER – DESIGN FLOW: 85.3 M3/H AIR CONSUMPTION: 5 M3/H CONVEYOR TYPE: INTRALOX RAISED RIP 400 CONVEYOR STATUS: PERFECT CONVEYOR MATERIAL: POLYPROPYLENE MAIN DRIVE: PLANETARY GEAR ELECTRICAL SUPPLY, PHASES: 3 VOLTAGE: 460 V AC TOLERANCES: +/- 10% FREQUENCY: 60 HZ
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación:
characteristics
table surface 1100 x 560 mm
dimensions (l x w x h) 4,33 x 2,7 x 2,94 m
rapid feed x / y / z 30/30/30 m/min
movement x / y / z 800/560/510 mm
spindle taper sk 40 din 69871
tool magazine with 30 positions
max. torque 82 nm
torque (100% dc) 54 nm
drive power (40% dc) 13 kw
drive power (100% dc) 9 kw
speed max. 12000 rpm
maximum load (table centre) 800 kg
weight approx. 5550 kg
general
vertical machining centres; control: dmg mori slimline multi-touch control


progressline digital cycle-time graphic rest time product counter
sk40 interface tool clamping sk 40 for pull-studs din 69872
preparation 4th axis ea 510.l indirect (siemens) preparation for rotary table (4th axis) lehmann ea-510.l indirect measuring system, including: - pneumatics and electrical preparation - software cylinder surface interpolation (tracyl) - the swivel cycle 800
production-package 1 production package 1 contents: - internal coolant supply 12 bar; - chip conveyor (scraper type) with tank capacity: 220 l (left) - bed flushing via m-function; - coolant spray gun for swarf removal - electronic handwheel - automatic cabin roof
ecoline touch probe-kit for siemens control ecoline touch probe-kit for siemens control, consisting of: - pp40 touch probe with optical signal transmission; - ots probe for tool measurement; - calibration tool; - calibration ting; - case for equipment. direct measuring system recommended
dmg mori messenger dmg mori messenger installation kit for the connection of one machine.
dmg mori netservice - client dmg mori netservice - client qualified support by internet-based remote diagnostics will be installed on an external pc!
special equipment operation 4
.gif" alt="Land-

characteristics
table surface 1100 x 560 mm
dimensions (l x w x h) 4,33 x 2,7 x 2,94 m
rapid feed x / y / z 30/30/30 m/min
movement x / y / z 800/560/510 mm
spindle taper sk 40 din 69871
tool magazine with 30 positions
max. torque 82 nm
torque (100% dc) 54 nm
drive power (40% dc) 13 kw
drive power (100% dc) 9 kw
speed max. 12000 rpm
maximum load (table centre) 800 kg
weight approx. 5550 kg
general
vertical machining centres; control: dmg mori slimline multi-touch control


progressline digital cycle-time graphic rest time product counter
sk40 interface tool clamping sk 40 for pull-studs din 69872
preparation 4th axis ea 510.l indirect (siemens) preparation for rotary table (4th axis) lehmann ea-510.l indirect measuring system, including: - pneumatics and electrical preparation - software cylinder surface interpolation (tracyl) - the swivel cycle 800
production-package 1 production package 1 contents: - internal coolant supply 12 bar; - chip conveyor (scraper type) with tank capacity: 220 l (left) - bed flushing via m-function; - coolant spray gun for swarf removal - electronic handwheel - automatic cabin roof
ecoline touch probe-kit for siemens control ecoline touch probe-kit for siemens control, consisting of: - pp40 touch probe with optical signal transmission; - ots probe for tool measurement; - calibration tool; - calibration ting; - case for equipment. direct measuring system recommended
dmg mori messenger dmg mori messenger installation kit for the connection of one machine.
dmg mori netservice - client dmg mori netservice - client qualified support by internet-based remote diagnostics will be installed on an external pc!
special equipment operation 4
" style="height: 18px;">

CHARACTERISTICS
TABLE SURFACE 1100 X 560 MM
DIMENSIONS (L X W X H) 4,33 X 2,7 X 2,94 M
RAPID FEED X / Y / Z 30/30/30 M/MIN
MOVEMENT X / Y / Z 800/560/510 MM
SPINDLE TAPER SK 40 DIN 69871
TOOL MAGAZINE WITH 30 POSITIONS
MAX. TORQUE 82 NM
TORQUE (100% DC) 54 NM
DRIVE POWER (40% DC) 13 KW
DRIVE POWER (100% DC) 9 KW
SPEED MAX. 12000 RPM
MAXIMUM LOAD (TABLE CENTRE) 800 KG
WEIGHT APPROX. 5550 KG
GENERAL
VERTICAL MACHINING CENTRES; CONTROL: DMG MORI SLIMLINE MULTI-TOUCH CONTROL


PROGRESSLINE DIGITAL CYCLE-TIME GRAPHIC REST TIME PRODUCT COUNTER
SK40 INTERFACE TOOL CLAMPING SK 40 FOR PULL-STUDS DIN 69872
PREPARATION 4TH AXIS EA 510.L INDIRECT (SIEMENS) PREPARATION FOR ROTARY TABLE (4TH AXIS) LEHMANN EA-510.L INDIRECT MEASURING SYSTEM, INCLUDING: - PNEUMATICS AND ELECTRICAL PREPARATION - SOFTWARE CYLINDER SURFACE INTERPOLATION (TRACYL) - THE SWIVEL CYCLE 800
PRODUCTION-PACKAGE 1 PRODUCTION PACKAGE 1 CONTENTS: - INTERNAL COOLANT SUPPLY 12 BAR; - CHIP CONVEYOR (SCRAPER TYPE) WITH TANK CAPACITY: 220 L (LEFT) - BED FLUSHING VIA M-FUNCTION; - COOLANT SPRAY GUN FOR SWARF REMOVAL - ELECTRONIC HANDWHEEL - AUTOMATIC CABIN ROOF
ECOLINE TOUCH PROBE-KIT FOR SIEMENS CONTROL ECOLINE TOUCH PROBE-KIT FOR SIEMENS CONTROL, CONSISTING OF: - PP40 TOUCH PROBE WITH OPTICAL SIGNAL TRANSMISSION; - OTS PROBE FOR TOOL MEASUREMENT; - CALIBRATION TOOL; - CALIBRATION TING; - CASE FOR EQUIPMENT. DIRECT MEASURING SYSTEM RECOMMENDED
DMG MORI MESSENGER DMG MORI MESSENGER INSTALLATION KIT FOR THE CONNECTION OF ONE MACHINE.
DMG MORI NETSERVICE - CLIENT DMG MORI NETSERVICE - CLIENT QUALIFIED SUPPORT BY INTERNET-BASED REMOTE DIAGNOSTICS WILL BE INSTALLED ON AN EXTERNAL PC!
SPECIAL EQUIPMENT OPERATION 4
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-bottle washing machine khs ec 14/95 single end 10 000 bph

this bottle washer was delivered in year 2000 and dismantled in 2009 and it has been in a warehouse ever since. the washing machine is single ended and designed for glass 0.33 and 0.5 liter glass bottles, max diameter 78 mm and max height 300 mm. the washer has siemens simatic s7 based control unit with a touch screen. this unit has been inspected by jade trading in december 2015 and according to our estimate all components, parts and mechanisms of machines are in good or satisfactory condition - only normal service is needed. our report is available for interested parties.

main technical data:

manufactory: khs, germany.
year: 2000.
model: ec 14/95 s22n01.
type: single end
ser. number: 1683
capacity: 9 000 – 10 000 bph.
bottles in a row: 14 pcs.
main step: 169 mm.
diameter of bottles: max. 78 mm.
height of bottles: min. 150 mm. max. 300 mm.
main dimensions: 7250 x 4215 x 3380 mm.
machine weight: 21 000 kg.   BOTTLE WASHING MACHINE KHS EC 14/95 SINGLE END 10 000 BPH THIS BOTTLE WASHER WAS DELIVERED IN YEAR 2000 AND DISMANTLED IN 2009 AND IT HAS BEEN IN A WAREHOUSE EVER SINCE. THE WASHING MACHINE IS SINGLE ENDED AND DESIGNED FOR GLASS 0.33 AND 0.5 LITER GLASS BOTTLES, MAX DIAMETER 78 MM AND MAX HEIGHT 300 MM. THE WASHER HAS SIEMENS SIMATIC S7 BASED CONTROL UNIT WITH A TOUCH SCREEN. THIS UNIT HAS BEEN INSPECTED BY JADE TRADING IN DECEMBER 2015 AND ACCORDING TO OUR ESTIMATE ALL COMPONENTS, PARTS AND MECHANISMS OF MACHINES ARE IN GOOD OR SATISFACTORY CONDITION - ONLY NORMAL SERVICE IS NEEDED. OUR REPORT IS AVAILABLE FOR INTERESTED PARTIES. MAIN TECHNICAL DATA: MANUFACTORY: KHS, GERMANY. YEAR: 2000. MODEL: EC 14/95 S22N01. TYPE: SINGLE END SER. NUMBER: 1683 CAPACITY: 9 000 – 10 000 BPH. BOTTLES IN A ROW: 14 PCS. MAIN STEP: 169 MM. DIAMETER OF BOTTLES: MAX. 78 MM. HEIGHT OF BOTTLES: MIN. 150 MM. MAX. 300 MM. MAIN DIMENSIONS: 7250 X 4215 X 3380 MM. MACHINE WEIGHT: 21 000 KG.
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación:
general
precision centre - linear drive package - active cooling for spindle, linear drives and electrical cabinet - frame temperatur control - direct measuring system - coolant/airblast changing - mpc machine protection control machine protection by quick shutdown; control: celos with siemens 840d sl operate
working area 1
longitudinal 320 mm
cross 300 mm
vertical 280 mm
technical data
feed rate longitudinal/transverse/vertical 50000/50000/50000 mm/min
rapid traverse longitudinal/transverse/vertical 50/50/50 m/min


main drive drive power (100% dc) 15 kw
drive power (40% dc) 19,5 kw
torque (100% dc) 12 nm
torque (40% dc) 16 nm
speed range - 40000 rpm
spindle taper hsk-e 40
tool magazine type of magazine wheel
type of gripper double gripper
number of tools 30
hsc 30 linear 5-axis specification hsc 30 linear with 5-axis specification clamping area Ø 250 mm, Ø 9.8 inch tilting range b-axis +/- 120°; c-axis 360° table load max. 80 kg / 176.4 lbs absolute measuring systems incl. permanent cooling of b- and c-axis motor t-slots 12h7 / 50
zero-point clamping system erowa its 150 zero point clamping system erowa its 150 chuck pre-installed on rotary table of the swivel- / rotary axis (air pressure supply of min. 6 bar requested)
infrared measuring probe tc 52 infrared touch probe type blum tc 52
tool measuring blum laser taktil tool measuring blum laser tactil non-contact optical tool measuring system with integrated mechanical touch probe including calibration tool
3d quick set 3d quickset tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
signal lamp 4-colour signal lamp 4-colour red: general error yellow: intervention necessary green: automatic mode blue: set-up mode
production package 980l ics coolant tempering production package coolant tempered with internal coolant supply (ics) special coolant temperature control for more kinematic stability. including paperband filter, coolant tempering and stirring device, swarf conveyor (scraper type) 40 bar/23 l/min/ 980
oil and emulsion mist separator oil and emulsion mist separator mechanical
minimum lubrication external 2 jets minimum lubrication external with 2 jets
air blast through spindle centre dry air blast through spindle centre (dry) activated by m function, (up 28.000rpm and higher)
high-speed-settings high-speed-settings selection of the optimal milling mode for the next machining-step.
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area. release after check list has been filled in.
safety package for power failure safety package for power failure overload limiter, undervoltage moni- toring with fast deceleration control
safety glass at operators door laminated safety glass at operators door
netservice (celos) netservice qualified support by internet-based remote diagnostics
service agent (celos) service agent (celos) overview of all maintenance work on the machine
messenger (celos) mesenger (celos) clear live status of the networked machines
.gif" alt="Land-

general
precision centre - linear drive package - active cooling for spindle, linear drives and electrical cabinet - frame temperatur control - direct measuring system - coolant/airblast changing - mpc machine protection control machine protection by quick shutdown; control: celos with siemens 840d sl operate
working area 1
longitudinal 320 mm
cross 300 mm
vertical 280 mm
technical data
feed rate longitudinal/transverse/vertical 50000/50000/50000 mm/min
rapid traverse longitudinal/transverse/vertical 50/50/50 m/min


main drive drive power (100% dc) 15 kw
drive power (40% dc) 19,5 kw
torque (100% dc) 12 nm
torque (40% dc) 16 nm
speed range - 40000 rpm
spindle taper hsk-e 40
tool magazine type of magazine wheel
type of gripper double gripper
number of tools 30
hsc 30 linear 5-axis specification hsc 30 linear with 5-axis specification clamping area Ø 250 mm, Ø 9.8 inch tilting range b-axis +/- 120°; c-axis 360° table load max. 80 kg / 176.4 lbs absolute measuring systems incl. permanent cooling of b- and c-axis motor t-slots 12h7 / 50
zero-point clamping system erowa its 150 zero point clamping system erowa its 150 chuck pre-installed on rotary table of the swivel- / rotary axis (air pressure supply of min. 6 bar requested)
infrared measuring probe tc 52 infrared touch probe type blum tc 52
tool measuring blum laser taktil tool measuring blum laser tactil non-contact optical tool measuring system with integrated mechanical touch probe including calibration tool
3d quick set 3d quickset tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
signal lamp 4-colour signal lamp 4-colour red: general error yellow: intervention necessary green: automatic mode blue: set-up mode
production package 980l ics coolant tempering production package coolant tempered with internal coolant supply (ics) special coolant temperature control for more kinematic stability. including paperband filter, coolant tempering and stirring device, swarf conveyor (scraper type) 40 bar/23 l/min/ 980
oil and emulsion mist separator oil and emulsion mist separator mechanical
minimum lubrication external 2 jets minimum lubrication external with 2 jets
air blast through spindle centre dry air blast through spindle centre (dry) activated by m function, (up 28.000rpm and higher)
high-speed-settings high-speed-settings selection of the optimal milling mode for the next machining-step.
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area. release after check list has been filled in.
safety package for power failure safety package for power failure overload limiter, undervoltage moni- toring with fast deceleration control
safety glass at operators door laminated safety glass at operators door
netservice (celos) netservice qualified support by internet-based remote diagnostics
service agent (celos) service agent (celos) overview of all maintenance work on the machine
messenger (celos) mesenger (celos) clear live status of the networked machines
" style="height: 18px;">

GENERAL
PRECISION CENTRE - LINEAR DRIVE PACKAGE - ACTIVE COOLING FOR SPINDLE, LINEAR DRIVES AND ELECTRICAL CABINET - FRAME TEMPERATUR CONTROL - DIRECT MEASURING SYSTEM - COOLANT/AIRBLAST CHANGING - MPC MACHINE PROTECTION CONTROL MACHINE PROTECTION BY QUICK SHUTDOWN; CONTROL: CELOS WITH SIEMENS 840D SL OPERATE
WORKING AREA 1
LONGITUDINAL 320 MM
CROSS 300 MM
VERTICAL 280 MM
TECHNICAL DATA
FEED RATE LONGITUDINAL/TRANSVERSE/VERTICAL 50000/50000/50000 MM/MIN
RAPID TRAVERSE LONGITUDINAL/TRANSVERSE/VERTICAL 50/50/50 M/MIN


MAIN DRIVE DRIVE POWER (100% DC) 15 KW
DRIVE POWER (40% DC) 19,5 KW
TORQUE (100% DC) 12 NM
TORQUE (40% DC) 16 NM
SPEED RANGE - 40000 RPM
SPINDLE TAPER HSK-E 40
TOOL MAGAZINE TYPE OF MAGAZINE WHEEL
TYPE OF GRIPPER DOUBLE GRIPPER
NUMBER OF TOOLS 30
HSC 30 LINEAR 5-AXIS SPECIFICATION HSC 30 LINEAR WITH 5-AXIS SPECIFICATION CLAMPING AREA Ø 250 MM, Ø 9.8 INCH TILTING RANGE B-AXIS +/- 120°; C-AXIS 360° TABLE LOAD MAX. 80 KG / 176.4 LBS ABSOLUTE MEASURING SYSTEMS INCL. PERMANENT COOLING OF B- AND C-AXIS MOTOR T-SLOTS 12H7 / 50
ZERO-POINT CLAMPING SYSTEM EROWA ITS 150 ZERO POINT CLAMPING SYSTEM EROWA ITS 150 CHUCK PRE-INSTALLED ON ROTARY TABLE OF THE SWIVEL- / ROTARY AXIS (AIR PRESSURE SUPPLY OF MIN. 6 BAR REQUESTED)
INFRARED MEASURING PROBE TC 52 INFRARED TOUCH PROBE TYPE BLUM TC 52
TOOL MEASURING BLUM LASER TAKTIL TOOL MEASURING BLUM LASER TACTIL NON-CONTACT OPTICAL TOOL MEASURING SYSTEM WITH INTEGRATED MECHANICAL TOUCH PROBE INCLUDING CALIBRATION TOOL
3D QUICK SET 3D QUICKSET TOOL KIT FOR CONTROL AND COMPENSATION OF THE CINEMATIC ACCURACY OF 5 AXIS MACHINE CONFIGURATIONS (ONLY WITH OPTION TOUCH PROBE)
SIGNAL LAMP 4-COLOUR SIGNAL LAMP 4-COLOUR RED: GENERAL ERROR YELLOW: INTERVENTION NECESSARY GREEN: AUTOMATIC MODE BLUE: SET-UP MODE
PRODUCTION PACKAGE 980L ICS COOLANT TEMPERING PRODUCTION PACKAGE COOLANT TEMPERED WITH INTERNAL COOLANT SUPPLY (ICS) SPECIAL COOLANT TEMPERATURE CONTROL FOR MORE KINEMATIC STABILITY. INCLUDING PAPERBAND FILTER, COOLANT TEMPERING AND STIRRING DEVICE, SWARF CONVEYOR (SCRAPER TYPE) 40 BAR/23 L/MIN/ 980
OIL AND EMULSION MIST SEPARATOR OIL AND EMULSION MIST SEPARATOR MECHANICAL
MINIMUM LUBRICATION EXTERNAL 2 JETS MINIMUM LUBRICATION EXTERNAL WITH 2 JETS
AIR BLAST THROUGH SPINDLE CENTRE DRY AIR BLAST THROUGH SPINDLE CENTRE (DRY) ACTIVATED BY M FUNCTION, (UP 28.000RPM AND HIGHER)
HIGH-SPEED-SETTINGS HIGH-SPEED-SETTINGS SELECTION OF THE OPTIMAL MILLING MODE FOR THE NEXT MACHINING-STEP.
OPERATION MODE 4 OPERATION MODE 4 PROCESS MONITORING IN THE PRODUCTION MANUAL INTERVENTION WITH OPEN DOORS OF MACHINING AREA. RELEASE AFTER CHECK LIST HAS BEEN FILLED IN.
SAFETY PACKAGE FOR POWER FAILURE SAFETY PACKAGE FOR POWER FAILURE OVERLOAD LIMITER, UNDERVOLTAGE MONI- TORING WITH FAST DECELERATION CONTROL
SAFETY GLASS AT OPERATORS DOOR LAMINATED SAFETY GLASS AT OPERATORS DOOR
NETSERVICE (CELOS) NETSERVICE QUALIFIED SUPPORT BY INTERNET-BASED REMOTE DIAGNOSTICS
SERVICE AGENT (CELOS) SERVICE AGENT (CELOS) OVERVIEW OF ALL MAINTENANCE WORK ON THE MACHINE
MESSENGER (CELOS) MESENGER (CELOS) CLEAR LIVE STATUS OF THE NETWORKED MACHINES
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-palletizer tmg sirio with strapex pallet wrapper 25 pallets/h 
  
this good condition automatic, low level palletizer is made in 2015 by italian tmg. a strapex pallet stretch wrapper as well as roller conveyor system for pallets are included. the equipment is installed and ready for immediate delivery. 
 
manufacturer: 	tmg impianti spa, italy 
model: 	sirio 2s3 
year: 	2015 
capacity: 	25 pallets/h 
control plc: 	siemens s7
pallet size: 	1200 x 800 mm, euro standard 
weight: 	3500 kg 
pallet wrapper: 	strapex ag (switzerland), type ringo 1360, year 1998 
pack conveyors: 	approx. 14 m 
pallet conveyors: 	approx. 5 m 

 PALLETIZER TMG SIRIO WITH STRAPEX PALLET WRAPPER 25 PALLETS/H THIS GOOD CONDITION AUTOMATIC, LOW LEVEL PALLETIZER IS MADE IN 2015 BY ITALIAN TMG. A STRAPEX PALLET STRETCH WRAPPER AS WELL AS ROLLER CONVEYOR SYSTEM FOR PALLETS ARE INCLUDED. THE EQUIPMENT IS INSTALLED AND READY FOR IMMEDIATE DELIVERY. MANUFACTURER: TMG IMPIANTI SPA, ITALY MODEL: SIRIO 2S3 YEAR: 2015 CAPACITY: 25 PALLETS/H CONTROL PLC: SIEMENS S7 PALLET SIZE: 1200 X 800 MM, EURO STANDARD WEIGHT: 3500 KG PALLET WRAPPER: STRAPEX AG (SWITZERLAND), TYPE RINGO 1360, YEAR 1998 PACK CONVEYORS: APPROX. 14 M PALLET CONVEYORS: APPROX. 5 M
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación:
general
precision centre - linear drive package - active cooling for spindle, linear drives and electrical cabinet - frame temperatur control - direct measuring system - coolant/airblast changing - mpc machine protection control machine protection by quick shutdown; control: celos with siemens 840d sl operate
working area 1
longitudinal 320 mm
cross 300 mm
vertical 280 mm
technical data
feed rate longitudinal/transverse/vertical 50000/50000/50000 mm/min
rapid traverse longitudinal/transverse/vertical 50/50/50 m/min


main drive drive power (100% dc) 15 kw
drive power (40% dc) 19,5 kw
torque (100% dc) 12 nm
torque (40% dc) 16 nm
speed range - 40000 rpm
spindle taper hsk-e 40
tool magazine type of magazine wheel
type of gripper double gripper
number of tools 30
hsc 30 linear 5-axis specification hsc 30 linear with 5-axis specification clamping area Ø 250 mm, Ø 9.8 inch tilting range b-axis +/- 120°; c-axis 360° table load max. 80 kg / 176.4 lbs absolute measuring systems incl. permanent cooling of b- and c-axis motor t-slots 12h7 / 50
zero-point clamping system erowa its 150 zero point clamping system erowa its 150 chuck pre-installed on rotary table of the swivel- / rotary axis (air pressure supply of min. 6 bar requested)
infrared measuring probe pp 400 optical infrared touch probe type renishaw pp 400 optical
tool measuring blum laser tool measuring blum laser non-contact optical tool measuring system including calibration tool
3d quick set 3d quickset tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
signal lamp 4-colour signal lamp 4-colour red: general error yellow: intervention necessary green: automatic mode blue: set-up mode
production package 600l with ics production package 600l-ics with internal coolant supply (ics) including paperband filter, swarf conveyor (scraper type) 40 bar/23 l/min/ 600-l tank 530 psi/6 gallon/min / 160 gallon rotating clear view window, bed flushing (recommended: laminated safety
oil and emulsion mist separator oil and emulsion mist separator mechanical
air blast through spindle centre dry air blast through spindle centre (dry) activated by m function, (up 28.000rpm and higher)
high-speed-settings high-speed-settings selection of the optimal milling mode for the next machining-step.
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area. release after check list has been filled in.
10 free m-functions for siemens free m-codes (m180-m189) for siemens 840d potential-free on contacts inside electrical cabinet
safety package for power failure safety package for power failure overload limiter, undervoltage moni- toring with fast deceleration control
preparation handling system dmg automation preparation handling system from dmg mori systems gmbh
safety glass at operators door laminated safety glass at operators door
netservice (celos) netservice qualified support by internet-based remote diagnostics
service agent (celos) service agent (celos) overview of all maintenance work on the machine
messenger (celos) mesenger (celos) clear live status of the networked machines
.gif" alt="Land-

general
precision centre - linear drive package - active cooling for spindle, linear drives and electrical cabinet - frame temperatur control - direct measuring system - coolant/airblast changing - mpc machine protection control machine protection by quick shutdown; control: celos with siemens 840d sl operate
working area 1
longitudinal 320 mm
cross 300 mm
vertical 280 mm
technical data
feed rate longitudinal/transverse/vertical 50000/50000/50000 mm/min
rapid traverse longitudinal/transverse/vertical 50/50/50 m/min


main drive drive power (100% dc) 15 kw
drive power (40% dc) 19,5 kw
torque (100% dc) 12 nm
torque (40% dc) 16 nm
speed range - 40000 rpm
spindle taper hsk-e 40
tool magazine type of magazine wheel
type of gripper double gripper
number of tools 30
hsc 30 linear 5-axis specification hsc 30 linear with 5-axis specification clamping area Ø 250 mm, Ø 9.8 inch tilting range b-axis +/- 120°; c-axis 360° table load max. 80 kg / 176.4 lbs absolute measuring systems incl. permanent cooling of b- and c-axis motor t-slots 12h7 / 50
zero-point clamping system erowa its 150 zero point clamping system erowa its 150 chuck pre-installed on rotary table of the swivel- / rotary axis (air pressure supply of min. 6 bar requested)
infrared measuring probe pp 400 optical infrared touch probe type renishaw pp 400 optical
tool measuring blum laser tool measuring blum laser non-contact optical tool measuring system including calibration tool
3d quick set 3d quickset tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
signal lamp 4-colour signal lamp 4-colour red: general error yellow: intervention necessary green: automatic mode blue: set-up mode
production package 600l with ics production package 600l-ics with internal coolant supply (ics) including paperband filter, swarf conveyor (scraper type) 40 bar/23 l/min/ 600-l tank 530 psi/6 gallon/min / 160 gallon rotating clear view window, bed flushing (recommended: laminated safety
oil and emulsion mist separator oil and emulsion mist separator mechanical
air blast through spindle centre dry air blast through spindle centre (dry) activated by m function, (up 28.000rpm and higher)
high-speed-settings high-speed-settings selection of the optimal milling mode for the next machining-step.
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area. release after check list has been filled in.
10 free m-functions for siemens free m-codes (m180-m189) for siemens 840d potential-free on contacts inside electrical cabinet
safety package for power failure safety package for power failure overload limiter, undervoltage moni- toring with fast deceleration control
preparation handling system dmg automation preparation handling system from dmg mori systems gmbh
safety glass at operators door laminated safety glass at operators door
netservice (celos) netservice qualified support by internet-based remote diagnostics
service agent (celos) service agent (celos) overview of all maintenance work on the machine
messenger (celos) mesenger (celos) clear live status of the networked machines
" style="height: 18px;">

GENERAL
PRECISION CENTRE - LINEAR DRIVE PACKAGE - ACTIVE COOLING FOR SPINDLE, LINEAR DRIVES AND ELECTRICAL CABINET - FRAME TEMPERATUR CONTROL - DIRECT MEASURING SYSTEM - COOLANT/AIRBLAST CHANGING - MPC MACHINE PROTECTION CONTROL MACHINE PROTECTION BY QUICK SHUTDOWN; CONTROL: CELOS WITH SIEMENS 840D SL OPERATE
WORKING AREA 1
LONGITUDINAL 320 MM
CROSS 300 MM
VERTICAL 280 MM
TECHNICAL DATA
FEED RATE LONGITUDINAL/TRANSVERSE/VERTICAL 50000/50000/50000 MM/MIN
RAPID TRAVERSE LONGITUDINAL/TRANSVERSE/VERTICAL 50/50/50 M/MIN


MAIN DRIVE DRIVE POWER (100% DC) 15 KW
DRIVE POWER (40% DC) 19,5 KW
TORQUE (100% DC) 12 NM
TORQUE (40% DC) 16 NM
SPEED RANGE - 40000 RPM
SPINDLE TAPER HSK-E 40
TOOL MAGAZINE TYPE OF MAGAZINE WHEEL
TYPE OF GRIPPER DOUBLE GRIPPER
NUMBER OF TOOLS 30
HSC 30 LINEAR 5-AXIS SPECIFICATION HSC 30 LINEAR WITH 5-AXIS SPECIFICATION CLAMPING AREA Ø 250 MM, Ø 9.8 INCH TILTING RANGE B-AXIS +/- 120°; C-AXIS 360° TABLE LOAD MAX. 80 KG / 176.4 LBS ABSOLUTE MEASURING SYSTEMS INCL. PERMANENT COOLING OF B- AND C-AXIS MOTOR T-SLOTS 12H7 / 50
ZERO-POINT CLAMPING SYSTEM EROWA ITS 150 ZERO POINT CLAMPING SYSTEM EROWA ITS 150 CHUCK PRE-INSTALLED ON ROTARY TABLE OF THE SWIVEL- / ROTARY AXIS (AIR PRESSURE SUPPLY OF MIN. 6 BAR REQUESTED)
INFRARED MEASURING PROBE PP 400 OPTICAL INFRARED TOUCH PROBE TYPE RENISHAW PP 400 OPTICAL
TOOL MEASURING BLUM LASER TOOL MEASURING BLUM LASER NON-CONTACT OPTICAL TOOL MEASURING SYSTEM INCLUDING CALIBRATION TOOL
3D QUICK SET 3D QUICKSET TOOL KIT FOR CONTROL AND COMPENSATION OF THE CINEMATIC ACCURACY OF 5 AXIS MACHINE CONFIGURATIONS (ONLY WITH OPTION TOUCH PROBE)
SIGNAL LAMP 4-COLOUR SIGNAL LAMP 4-COLOUR RED: GENERAL ERROR YELLOW: INTERVENTION NECESSARY GREEN: AUTOMATIC MODE BLUE: SET-UP MODE
PRODUCTION PACKAGE 600L WITH ICS PRODUCTION PACKAGE 600L-ICS WITH INTERNAL COOLANT SUPPLY (ICS) INCLUDING PAPERBAND FILTER, SWARF CONVEYOR (SCRAPER TYPE) 40 BAR/23 L/MIN/ 600-L TANK 530 PSI/6 GALLON/MIN / 160 GALLON ROTATING CLEAR VIEW WINDOW, BED FLUSHING (RECOMMENDED: LAMINATED SAFETY
OIL AND EMULSION MIST SEPARATOR OIL AND EMULSION MIST SEPARATOR MECHANICAL
AIR BLAST THROUGH SPINDLE CENTRE DRY AIR BLAST THROUGH SPINDLE CENTRE (DRY) ACTIVATED BY M FUNCTION, (UP 28.000RPM AND HIGHER)
HIGH-SPEED-SETTINGS HIGH-SPEED-SETTINGS SELECTION OF THE OPTIMAL MILLING MODE FOR THE NEXT MACHINING-STEP.
OPERATION MODE 4 OPERATION MODE 4 PROCESS MONITORING IN THE PRODUCTION MANUAL INTERVENTION WITH OPEN DOORS OF MACHINING AREA. RELEASE AFTER CHECK LIST HAS BEEN FILLED IN.
10 FREE M-FUNCTIONS FOR SIEMENS FREE M-CODES (M180-M189) FOR SIEMENS 840D POTENTIAL-FREE ON CONTACTS INSIDE ELECTRICAL CABINET
SAFETY PACKAGE FOR POWER FAILURE SAFETY PACKAGE FOR POWER FAILURE OVERLOAD LIMITER, UNDERVOLTAGE MONI- TORING WITH FAST DECELERATION CONTROL
PREPARATION HANDLING SYSTEM DMG AUTOMATION PREPARATION HANDLING SYSTEM FROM DMG MORI SYSTEMS GMBH
SAFETY GLASS AT OPERATORS DOOR LAMINATED SAFETY GLASS AT OPERATORS DOOR
NETSERVICE (CELOS) NETSERVICE QUALIFIED SUPPORT BY INTERNET-BASED REMOTE DIAGNOSTICS
SERVICE AGENT (CELOS) SERVICE AGENT (CELOS) OVERVIEW OF ALL MAINTENANCE WORK ON THE MACHINE
MESSENGER (CELOS) MESENGER (CELOS) CLEAR LIVE STATUS OF THE NETWORKED MACHINES
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Precio: 15.000 €
Ubicación: Land-control siemens 805

technical data:

work area / dimensions
swing over bed [mm] 820
swing over facing slide [mm] 515
displacement of the plan slide [mm] 520
displacement of the upper support [mm] 250
turning length [mm] 2000
tip height on flat railway [mm] 400
bed width [mm] 560
bed sleigh length [mm] 800
facing slide width [mm] 320
plan valve length [mm] 1005
upper support width [mm] 200
turning tool cross section according to din 770 hxb [mm] 40 x 25
 
main spindle
spindle nose according to din 55 027 [gr.] 11
spindle diameter in front bearing [mm] 170
spindle bore [mm] 128
inner taper of main spindle [metr.] 136

main drive infinitely adjustable three-phase motor (ac motor)
power 60% / 100% ed [kw] 46/37
torque max 60% / 100% ed [nm] 5,300/4.260
torque max 60% / 100% ed [nm] 5,300/4.260
total speed range [min-1] 6.3 1,600
transmission levels 2
speed range gear-unit stage 1 [min-1] 6.3-360
speed range gear-unit stage 2 [min-1] 28-1,600
constant cutting speed [m/min] 1-9,999
influence of speed [%] 50-120
load indicator in % of the screen [%] 0-140

feed drives ac servo drives (ac motor)
feed range plan and longitudinal [mm/rev] 0,01-50
maximum feed speed
plan (rapid traverse) [m/min] 5
conventional rapid plan 2.5 [m/min]
maximum feed speed
lw (rapid traverse) [m/min] 10
conventional rapid traverse along [m/min] 5
feed force plan [n] 12,500
feed force along [n] 20,000
influence of feed rate [%] 0-120
metric thread thread pitches (longitudinal, plan and conical) [mm] 0.1-400

tailstock
quill diameter [mm] 125
quill stroke [mm] 280
inner taper of quill of [mk] 6
point angle, normal 600
 
allowable workpiece weight
flying, maximum focus distance 250 mm
of the clamping means leading edge [kg] 1,250
with tailstock [kg] 3.150
with 1 stick of set [kg] 3.450 with 2 rests [kg] 4,000

screen
12 "-monochrom (color display option) with 24 rows a-40 characters, graphic"
ads:
depending on the situation and importance
-large position indicator for the operating point in diameter
  and length
-selected speed or cutting speed
-selected feed rate in mm/rev or mm/min
-used tool
-inserted gear-unit stage
-maximum speed of the chuck (for work with constant
  cutting speed)
-selector adjustment of feed and speed in percent
-angle for point shut of the main spindle
  (e.g. loading aid)
-debit note (spindle load in %)
 CONTROL SIEMENS 805 TECHNICAL DATA: WORK AREA / DIMENSIONS SWING OVER BED [MM] 820 SWING OVER FACING SLIDE [MM] 515 DISPLACEMENT OF THE PLAN SLIDE [MM] 520 DISPLACEMENT OF THE UPPER SUPPORT [MM] 250 TURNING LENGTH [MM] 2000 TIP HEIGHT ON FLAT RAILWAY [MM] 400 BED WIDTH [MM] 560 BED SLEIGH LENGTH [MM] 800 FACING SLIDE WIDTH [MM] 320 PLAN VALVE LENGTH [MM] 1005 UPPER SUPPORT WIDTH [MM] 200 TURNING TOOL CROSS SECTION ACCORDING TO DIN 770 HXB [MM] 40 X 25 MAIN SPINDLE SPINDLE NOSE ACCORDING TO DIN 55 027 [GR.] 11 SPINDLE DIAMETER IN FRONT BEARING [MM] 170 SPINDLE BORE [MM] 128 INNER TAPER OF MAIN SPINDLE [METR.] 136 MAIN DRIVE INFINITELY ADJUSTABLE THREE-PHASE MOTOR (AC MOTOR) POWER 60% / 100% ED [KW] 46/37 TORQUE MAX 60% / 100% ED [NM] 5,300/4.260 TORQUE MAX 60% / 100% ED [NM] 5,300/4.260 TOTAL SPEED RANGE [MIN-1] 6.3 1,600 TRANSMISSION LEVELS 2 SPEED RANGE GEAR-UNIT STAGE 1 [MIN-1] 6.3-360 SPEED RANGE GEAR-UNIT STAGE 2 [MIN-1] 28-1,600 CONSTANT CUTTING SPEED [M/MIN] 1-9,999 INFLUENCE OF SPEED [%] 50-120 LOAD INDICATOR IN % OF THE SCREEN [%] 0-140 FEED DRIVES AC SERVO DRIVES (AC MOTOR) FEED RANGE PLAN AND LONGITUDINAL [MM/REV] 0,01-50 MAXIMUM FEED SPEED PLAN (RAPID TRAVERSE) [M/MIN] 5 CONVENTIONAL RAPID PLAN 2.5 [M/MIN] MAXIMUM FEED SPEED LW (RAPID TRAVERSE) [M/MIN] 10 CONVENTIONAL RAPID TRAVERSE ALONG [M/MIN] 5 FEED FORCE PLAN [N] 12,500 FEED FORCE ALONG [N] 20,000 INFLUENCE OF FEED RATE [%] 0-120 METRIC THREAD THREAD PITCHES (LONGITUDINAL, PLAN AND CONICAL) [MM] 0.1-400 TAILSTOCK QUILL DIAMETER [MM] 125 QUILL STROKE [MM] 280 INNER TAPER OF QUILL OF [MK] 6 POINT ANGLE, NORMAL 600 ALLOWABLE WORKPIECE WEIGHT FLYING, MAXIMUM FOCUS DISTANCE 250 MM OF THE CLAMPING MEANS LEADING EDGE [KG] 1,250 WITH TAILSTOCK [KG] 3.150 WITH 1 STICK OF SET [KG] 3.450 WITH 2 RESTS [KG] 4,000 SCREEN 12 "-MONOCHROM (COLOR DISPLAY OPTION) WITH 24 ROWS A-40 CHARACTERS, GRAPHIC" ADS: DEPENDING ON THE SITUATION AND IMPORTANCE -LARGE POSITION INDICATOR FOR THE OPERATING POINT IN DIAMETER AND LENGTH -SELECTED SPEED OR CUTTING SPEED -SELECTED FEED RATE IN MM/REV OR MM/MIN -USED TOOL -INSERTED GEAR-UNIT STAGE -MAXIMUM SPEED OF THE CHUCK (FOR WORK WITH CONSTANT CUTTING SPEED) -SELECTOR ADJUSTMENT OF FEED AND SPEED IN PERCENT -ANGLE FOR POINT SHUT OF THE MAIN SPINDLE (E.G. LOADING AID) -DEBIT NOTE (SPINDLE LOAD IN %)
Vendedor: HILGERT AG
Año de construcción: usado
Ubicación:
general
vertical machining center in c-frame-design new dmg mori design direct measuring system x,y,z; control: celos with siemens 840d sl operate
technical data
feed rate longitudinal/transverse/vertical 1-42000/1-42000/1-42000 mm/min
rapid traverse longitudinal/transverse/vertical 42/42/42 m/min
working area 1
longitudinal 650 mm
cross 520 mm
vertical 475 mm
tool changer
type of magazine wheel
type of gripper double gripper
number of tools 30


table table surface 960 x 570 mm
maximum load (table centre) 800 kg
slot width 14 mm
number of slots 5
distance between t-slots 100 mm
infrared measuring probe pp60 optical infrared touch probe make renishaw pp 60 optical (omp 60)
laser tool measuring laser tool measuring, tool lenght and diameter measuring automatically cleaning through external airblast calibration tool with taper
mpc machine protection control mpc machine protection control machine protection by quick shutdown
internal coolant supply basic package 3 internal coolant supply basic package 3 contents: rotary inlet for spindle, internal coolant supply papertype-filter 40 bar / 580 psi tank capacity: 600l / 158,5 us gallons chip conveyor, chip flushing working area cabin roof
advanced bed flushing advanced bed flushing additional rinsing line on the right side panel, flushing volume of the entire bed flushing is manually adjustable (only in combination with job package or internal coolant supply basic package 1,2,3,4)
oil- and emulsion mist separator mechanical oil- and emulsion mist separator mechanical (only available with option cabin roof)
air blast through spindle centre air blast through spindle centre activated by m function, maintained air with low oil rate
rotating clear-view window rotating clear-view window (only available with option cabin roof)
application tuning cycle atc application tuning cycle atc programmable feed parameter selection for machining task: accuracy/surface/speed
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area. release after check list has been filled in.
safety package for power failure (incl. ipc) safety package for power failure: package for power failure ipc celos (for proper shutdown of ipc); overload limiter, undervoltage monitoring with fast deceleration control
energy meter for siemens 840 sl op celos energy meter for 3d control siemens 840d solutionline operate with celos
coolant-air blast change-over coolant - air-blast changeover external switchable via m-function
machine documentation on cd-rom machine documentation on cd-rom: operating instructions, programming instructions, technic mechanical, technic electrical, parts catalogue
coolant unit for electrical cabinet cooling unit for electrical cabinet recommended for ambient temperatures above 35 °c up to a maximum of 50 °c
netservice (celos) netservice qualified support by internet-based remote diagnostics
service agent (celos) service agent (celos) overview of all maintenance work on the machine
messenger (celos) mesenger (celos) clear live status of the networked machines
special equipment - spindle speed up to 20 - 40,000 rpm with shaft cooling for tool holder hsk-e50 according to din69893 - tool magazine 30 places hsk-e50
.gif" alt="Land-

general
vertical machining center in c-frame-design new dmg mori design direct measuring system x,y,z; control: celos with siemens 840d sl operate
technical data
feed rate longitudinal/transverse/vertical 1-42000/1-42000/1-42000 mm/min
rapid traverse longitudinal/transverse/vertical 42/42/42 m/min
working area 1
longitudinal 650 mm
cross 520 mm
vertical 475 mm
tool changer
type of magazine wheel
type of gripper double gripper
number of tools 30


table table surface 960 x 570 mm
maximum load (table centre) 800 kg
slot width 14 mm
number of slots 5
distance between t-slots 100 mm
infrared measuring probe pp60 optical infrared touch probe make renishaw pp 60 optical (omp 60)
laser tool measuring laser tool measuring, tool lenght and diameter measuring automatically cleaning through external airblast calibration tool with taper
mpc machine protection control mpc machine protection control machine protection by quick shutdown
internal coolant supply basic package 3 internal coolant supply basic package 3 contents: rotary inlet for spindle, internal coolant supply papertype-filter 40 bar / 580 psi tank capacity: 600l / 158,5 us gallons chip conveyor, chip flushing working area cabin roof
advanced bed flushing advanced bed flushing additional rinsing line on the right side panel, flushing volume of the entire bed flushing is manually adjustable (only in combination with job package or internal coolant supply basic package 1,2,3,4)
oil- and emulsion mist separator mechanical oil- and emulsion mist separator mechanical (only available with option cabin roof)
air blast through spindle centre air blast through spindle centre activated by m function, maintained air with low oil rate
rotating clear-view window rotating clear-view window (only available with option cabin roof)
application tuning cycle atc application tuning cycle atc programmable feed parameter selection for machining task: accuracy/surface/speed
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area. release after check list has been filled in.
safety package for power failure (incl. ipc) safety package for power failure: package for power failure ipc celos (for proper shutdown of ipc); overload limiter, undervoltage monitoring with fast deceleration control
energy meter for siemens 840 sl op celos energy meter for 3d control siemens 840d solutionline operate with celos
coolant-air blast change-over coolant - air-blast changeover external switchable via m-function
machine documentation on cd-rom machine documentation on cd-rom: operating instructions, programming instructions, technic mechanical, technic electrical, parts catalogue
coolant unit for electrical cabinet cooling unit for electrical cabinet recommended for ambient temperatures above 35 °c up to a maximum of 50 °c
netservice (celos) netservice qualified support by internet-based remote diagnostics
service agent (celos) service agent (celos) overview of all maintenance work on the machine
messenger (celos) mesenger (celos) clear live status of the networked machines
special equipment - spindle speed up to 20 - 40,000 rpm with shaft cooling for tool holder hsk-e50 according to din69893 - tool magazine 30 places hsk-e50
" style="height: 18px;">

GENERAL
VERTICAL MACHINING CENTER IN C-FRAME-DESIGN NEW DMG MORI DESIGN DIRECT MEASURING SYSTEM X,Y,Z; CONTROL: CELOS WITH SIEMENS 840D SL OPERATE
TECHNICAL DATA
FEED RATE LONGITUDINAL/TRANSVERSE/VERTICAL 1-42000/1-42000/1-42000 MM/MIN
RAPID TRAVERSE LONGITUDINAL/TRANSVERSE/VERTICAL 42/42/42 M/MIN
WORKING AREA 1
LONGITUDINAL 650 MM
CROSS 520 MM
VERTICAL 475 MM
TOOL CHANGER
TYPE OF MAGAZINE WHEEL
TYPE OF GRIPPER DOUBLE GRIPPER
NUMBER OF TOOLS 30


TABLE TABLE SURFACE 960 X 570 MM
MAXIMUM LOAD (TABLE CENTRE) 800 KG
SLOT WIDTH 14 MM
NUMBER OF SLOTS 5
DISTANCE BETWEEN T-SLOTS 100 MM
INFRARED MEASURING PROBE PP60 OPTICAL INFRARED TOUCH PROBE MAKE RENISHAW PP 60 OPTICAL (OMP 60)
LASER TOOL MEASURING LASER TOOL MEASURING, TOOL LENGHT AND DIAMETER MEASURING AUTOMATICALLY CLEANING THROUGH EXTERNAL AIRBLAST CALIBRATION TOOL WITH TAPER
MPC MACHINE PROTECTION CONTROL MPC MACHINE PROTECTION CONTROL MACHINE PROTECTION BY QUICK SHUTDOWN
INTERNAL COOLANT SUPPLY BASIC PACKAGE 3 INTERNAL COOLANT SUPPLY BASIC PACKAGE 3 CONTENTS: ROTARY INLET FOR SPINDLE, INTERNAL COOLANT SUPPLY PAPERTYPE-FILTER 40 BAR / 580 PSI TANK CAPACITY: 600L / 158,5 US GALLONS CHIP CONVEYOR, CHIP FLUSHING WORKING AREA CABIN ROOF
ADVANCED BED FLUSHING ADVANCED BED FLUSHING ADDITIONAL RINSING LINE ON THE RIGHT SIDE PANEL, FLUSHING VOLUME OF THE ENTIRE BED FLUSHING IS MANUALLY ADJUSTABLE (ONLY IN COMBINATION WITH JOB PACKAGE OR INTERNAL COOLANT SUPPLY BASIC PACKAGE 1,2,3,4)
OIL- AND EMULSION MIST SEPARATOR MECHANICAL OIL- AND EMULSION MIST SEPARATOR MECHANICAL (ONLY AVAILABLE WITH OPTION CABIN ROOF)
AIR BLAST THROUGH SPINDLE CENTRE AIR BLAST THROUGH SPINDLE CENTRE ACTIVATED BY M FUNCTION, MAINTAINED AIR WITH LOW OIL RATE
ROTATING CLEAR-VIEW WINDOW ROTATING CLEAR-VIEW WINDOW (ONLY AVAILABLE WITH OPTION CABIN ROOF)
APPLICATION TUNING CYCLE ATC APPLICATION TUNING CYCLE ATC PROGRAMMABLE FEED PARAMETER SELECTION FOR MACHINING TASK: ACCURACY/SURFACE/SPEED
OPERATION MODE 4 OPERATION MODE 4 PROCESS MONITORING IN THE PRODUCTION MANUAL INTERVENTION WITH OPEN DOORS OF MACHINING AREA. RELEASE AFTER CHECK LIST HAS BEEN FILLED IN.
SAFETY PACKAGE FOR POWER FAILURE (INCL. IPC) SAFETY PACKAGE FOR POWER FAILURE: PACKAGE FOR POWER FAILURE IPC CELOS (FOR PROPER SHUTDOWN OF IPC); OVERLOAD LIMITER, UNDERVOLTAGE MONITORING WITH FAST DECELERATION CONTROL
ENERGY METER FOR SIEMENS 840 SL OP CELOS ENERGY METER FOR 3D CONTROL SIEMENS 840D SOLUTIONLINE OPERATE WITH CELOS
COOLANT-AIR BLAST CHANGE-OVER COOLANT - AIR-BLAST CHANGEOVER EXTERNAL SWITCHABLE VIA M-FUNCTION
MACHINE DOCUMENTATION ON CD-ROM MACHINE DOCUMENTATION ON CD-ROM: OPERATING INSTRUCTIONS, PROGRAMMING INSTRUCTIONS, TECHNIC MECHANICAL, TECHNIC ELECTRICAL, PARTS CATALOGUE
COOLANT UNIT FOR ELECTRICAL CABINET COOLING UNIT FOR ELECTRICAL CABINET RECOMMENDED FOR AMBIENT TEMPERATURES ABOVE 35 °C UP TO A MAXIMUM OF 50 °C
NETSERVICE (CELOS) NETSERVICE QUALIFIED SUPPORT BY INTERNET-BASED REMOTE DIAGNOSTICS
SERVICE AGENT (CELOS) SERVICE AGENT (CELOS) OVERVIEW OF ALL MAINTENANCE WORK ON THE MACHINE
MESSENGER (CELOS) MESENGER (CELOS) CLEAR LIVE STATUS OF THE NETWORKED MACHINES
SPECIAL EQUIPMENT - SPINDLE SPEED UP TO 20 - 40,000 RPM WITH SHAFT COOLING FOR TOOL HOLDER HSK-E50 ACCORDING TO DIN69893 - TOOL MAGAZINE 30 PLACES HSK-E50
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-huron kx10 of used vertical machining center:
year: 1998
digital control: siemens 840 d - (sinumerik - shopmill)
racing x/y/z: 1000 x 700 x 550 mm
the table surface: 1250 x 700 [mm]
max load on table: 1500 [kg]
electro-spindle: gmn hcs 230-24000
spindle speed: 24 000 [rpm] type pin: din 69893 - hsk 63a / power 18/20 kw
machine power: 50 [kw] store tools: 20 [pos]
machine weight: 10,000 [kg] equipment:

watering centre pin high pressure
conveyor chip electronic hand wheel
ect.

technical characteristics without commitment - available unless sold - regulations to be agreed - detailed on request offer
 HURON KX10 OF USED VERTICAL MACHINING CENTER: YEAR: 1998 DIGITAL CONTROL: SIEMENS 840 D - (SINUMERIK - SHOPMILL) RACING X/Y/Z: 1000 X 700 X 550 MM THE TABLE SURFACE: 1250 X 700 [MM] MAX LOAD ON TABLE: 1500 [KG] ELECTRO-SPINDLE: GMN HCS 230-24000 SPINDLE SPEED: 24 000 [RPM] TYPE PIN: DIN 69893 - HSK 63A / POWER 18/20 KW MACHINE POWER: 50 [KW] STORE TOOLS: 20 [POS] MACHINE WEIGHT: 10,000 [KG] EQUIPMENT: WATERING CENTRE PIN HIGH PRESSURE CONVEYOR CHIP ELECTRONIC HAND WHEEL ECT. TECHNICAL CHARACTERISTICS WITHOUT COMMITMENT - AVAILABLE UNLESS SOLD - REGULATIONS TO BE AGREED - DETAILED ON REQUEST OFFER
Vendedor: ETS AMANN SARL
Año de construcción: usado
Ubicación:
general
universal machining centre new dmg mori design; control: celos with siemens 840d sl operate
technical data
feed rate longitudinal/transverse/vertical 80000/80000/80000 mm/min
rapid traverse longitudinal/transverse/vertical 80/80/80 m/min
working area 1
longitudinal 450 mm
cross 400 mm
vertical 375 mm
tool changer
type of magazine chain
type of gripper double gripper
number of tools 60
max. tool weight 6 kg
max. tool length 300 mm
max. tool diameter with occupied adjacent pockets 80 mm
max. tool dia. with free neighbouring pockets 130 mm
floor space/weight
dimensions (l x w x h) 6,2 x7,38 x 2,53 m
weight approx. 7150 kg


dynamic package dmu 40 evo linear dynamic package for dmu 40 evo linear linear drive x/y-axis with 80 m/min // 262.48 ft/min rapid feed x/y/z 80 m/min // 262.48 ft/min, acceleration x/y/z 10 m/s² // 32.8 ft/s² active chiller for main spindle, lineardrives and table
package mill / turn package mill / turn (only available for siemens 840d solutionline) nc-mill-turn table 450x450 mm / 17.7x17.7 in rounded down to d460 mm / 18.1 in c-axis direct drive, speed max.1,200 rpm integrated balancing system motorspindle 20-18,000 rpm power 35/25
chain-type tool magazine 60 pockets tool magazine with 60 positions, chain type with double gripper (differently from standard)
direct measuring system direct path measuring system
cabine full protection cabin
preparation 3d quickset machine preparation for use of the 3d quickset toolkit. included is the softwareoption for 3d quickset for one machine. 5 axis machine configurations (only with option touch probe)
infrared measuring probe ts 649 dmg infrared touch probe make heidenhain ts 649 dmg
combi -tool measuring blum combi - tool measuring blum lasercontrol nt-h 3d laser-system for milling tools 3d-probe for turning tools automatically turn away of the measuring unit under table level including calibration tool
signal lamp 4-colour signal lamp 4-colour red: general error yellow: intervention necessary green: automatic mode blue: set-up mode
spindle utilisation detector spindle utilisation detector for main drive, integrated in headstock covering
swarf conveyor, apron conveyor swarf conveyor,type apron conveyor with screen baket recommended for large swarf and thread chips
internal coolant supply 40 bar / 600l internal coolant supply (ics) with paper type filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon incl. rotating clear-view window, air purge for linear measuring system, bed flushing
oil and emulsion mist separator oil and emulsion mist separator mechanical
extended swarf flushing extended swarf flushing additional flushing of the working area door left hand side, y axis and right cabin wall volume of the flushing adjustable manual (only in combination with internal coolant)
mpc machine protection control mpc machine protection control machine protection by quick shutdown
air blast through spindle centre air blast through spindle centre selection with m function maintained air (1 drop oil per 8min) (in combination with ics possible)
machine documentation on cd-rom machine documentation on cd-rom: operating instructions, programming instructions, technic mechanical, technic electrical, parts catalogue
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area. release after check list has been filled in.
netservice (celos) netservice qualified support by internet-based remote diagnostics
service agent (celos) service agent (celos) overview of all maintenance work on the machine
messenger (celos) mesenger (celos) clear live status of the networked machines
.gif" alt="Land-

general
universal machining centre new dmg mori design; control: celos with siemens 840d sl operate
technical data
feed rate longitudinal/transverse/vertical 80000/80000/80000 mm/min
rapid traverse longitudinal/transverse/vertical 80/80/80 m/min
working area 1
longitudinal 450 mm
cross 400 mm
vertical 375 mm
tool changer
type of magazine chain
type of gripper double gripper
number of tools 60
max. tool weight 6 kg
max. tool length 300 mm
max. tool diameter with occupied adjacent pockets 80 mm
max. tool dia. with free neighbouring pockets 130 mm
floor space/weight
dimensions (l x w x h) 6,2 x7,38 x 2,53 m
weight approx. 7150 kg


dynamic package dmu 40 evo linear dynamic package for dmu 40 evo linear linear drive x/y-axis with 80 m/min // 262.48 ft/min rapid feed x/y/z 80 m/min // 262.48 ft/min, acceleration x/y/z 10 m/s² // 32.8 ft/s² active chiller for main spindle, lineardrives and table
package mill / turn package mill / turn (only available for siemens 840d solutionline) nc-mill-turn table 450x450 mm / 17.7x17.7 in rounded down to d460 mm / 18.1 in c-axis direct drive, speed max.1,200 rpm integrated balancing system motorspindle 20-18,000 rpm power 35/25
chain-type tool magazine 60 pockets tool magazine with 60 positions, chain type with double gripper (differently from standard)
direct measuring system direct path measuring system
cabine full protection cabin
preparation 3d quickset machine preparation for use of the 3d quickset toolkit. included is the softwareoption for 3d quickset for one machine. 5 axis machine configurations (only with option touch probe)
infrared measuring probe ts 649 dmg infrared touch probe make heidenhain ts 649 dmg
combi -tool measuring blum combi - tool measuring blum lasercontrol nt-h 3d laser-system for milling tools 3d-probe for turning tools automatically turn away of the measuring unit under table level including calibration tool
signal lamp 4-colour signal lamp 4-colour red: general error yellow: intervention necessary green: automatic mode blue: set-up mode
spindle utilisation detector spindle utilisation detector for main drive, integrated in headstock covering
swarf conveyor, apron conveyor swarf conveyor,type apron conveyor with screen baket recommended for large swarf and thread chips
internal coolant supply 40 bar / 600l internal coolant supply (ics) with paper type filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon incl. rotating clear-view window, air purge for linear measuring system, bed flushing
oil and emulsion mist separator oil and emulsion mist separator mechanical
extended swarf flushing extended swarf flushing additional flushing of the working area door left hand side, y axis and right cabin wall volume of the flushing adjustable manual (only in combination with internal coolant)
mpc machine protection control mpc machine protection control machine protection by quick shutdown
air blast through spindle centre air blast through spindle centre selection with m function maintained air (1 drop oil per 8min) (in combination with ics possible)
machine documentation on cd-rom machine documentation on cd-rom: operating instructions, programming instructions, technic mechanical, technic electrical, parts catalogue
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area. release after check list has been filled in.
netservice (celos) netservice qualified support by internet-based remote diagnostics
service agent (celos) service agent (celos) overview of all maintenance work on the machine
messenger (celos) mesenger (celos) clear live status of the networked machines
" style="height: 18px;">

GENERAL
UNIVERSAL MACHINING CENTRE NEW DMG MORI DESIGN; CONTROL: CELOS WITH SIEMENS 840D SL OPERATE
TECHNICAL DATA
FEED RATE LONGITUDINAL/TRANSVERSE/VERTICAL 80000/80000/80000 MM/MIN
RAPID TRAVERSE LONGITUDINAL/TRANSVERSE/VERTICAL 80/80/80 M/MIN
WORKING AREA 1
LONGITUDINAL 450 MM
CROSS 400 MM
VERTICAL 375 MM
TOOL CHANGER
TYPE OF MAGAZINE CHAIN
TYPE OF GRIPPER DOUBLE GRIPPER
NUMBER OF TOOLS 60
MAX. TOOL WEIGHT 6 KG
MAX. TOOL LENGTH 300 MM
MAX. TOOL DIAMETER WITH OCCUPIED ADJACENT POCKETS 80 MM
MAX. TOOL DIA. WITH FREE NEIGHBOURING POCKETS 130 MM
FLOOR SPACE/WEIGHT
DIMENSIONS (L X W X H) 6,2 X7,38 X 2,53 M
WEIGHT APPROX. 7150 KG


DYNAMIC PACKAGE DMU 40 EVO LINEAR DYNAMIC PACKAGE FOR DMU 40 EVO LINEAR LINEAR DRIVE X/Y-AXIS WITH 80 M/MIN // 262.48 FT/MIN RAPID FEED X/Y/Z 80 M/MIN // 262.48 FT/MIN, ACCELERATION X/Y/Z 10 M/S² // 32.8 FT/S² ACTIVE CHILLER FOR MAIN SPINDLE, LINEARDRIVES AND TABLE
PACKAGE MILL / TURN PACKAGE MILL / TURN (ONLY AVAILABLE FOR SIEMENS 840D SOLUTIONLINE) NC-MILL-TURN TABLE 450X450 MM / 17.7X17.7 IN ROUNDED DOWN TO D460 MM / 18.1 IN C-AXIS DIRECT DRIVE, SPEED MAX.1,200 RPM INTEGRATED BALANCING SYSTEM MOTORSPINDLE 20-18,000 RPM POWER 35/25
CHAIN-TYPE TOOL MAGAZINE 60 POCKETS TOOL MAGAZINE WITH 60 POSITIONS, CHAIN TYPE WITH DOUBLE GRIPPER (DIFFERENTLY FROM STANDARD)
DIRECT MEASURING SYSTEM DIRECT PATH MEASURING SYSTEM
CABINE FULL PROTECTION CABIN
PREPARATION 3D QUICKSET MACHINE PREPARATION FOR USE OF THE 3D QUICKSET TOOLKIT. INCLUDED IS THE SOFTWAREOPTION FOR 3D QUICKSET FOR ONE MACHINE. 5 AXIS MACHINE CONFIGURATIONS (ONLY WITH OPTION TOUCH PROBE)
INFRARED MEASURING PROBE TS 649 DMG INFRARED TOUCH PROBE MAKE HEIDENHAIN TS 649 DMG
COMBI -TOOL MEASURING BLUM COMBI - TOOL MEASURING BLUM LASERCONTROL NT-H 3D LASER-SYSTEM FOR MILLING TOOLS 3D-PROBE FOR TURNING TOOLS AUTOMATICALLY TURN AWAY OF THE MEASURING UNIT UNDER TABLE LEVEL INCLUDING CALIBRATION TOOL
SIGNAL LAMP 4-COLOUR SIGNAL LAMP 4-COLOUR RED: GENERAL ERROR YELLOW: INTERVENTION NECESSARY GREEN: AUTOMATIC MODE BLUE: SET-UP MODE
SPINDLE UTILISATION DETECTOR SPINDLE UTILISATION DETECTOR FOR MAIN DRIVE, INTEGRATED IN HEADSTOCK COVERING
SWARF CONVEYOR, APRON CONVEYOR SWARF CONVEYOR,TYPE APRON CONVEYOR WITH SCREEN BAKET RECOMMENDED FOR LARGE SWARF AND THREAD CHIPS
INTERNAL COOLANT SUPPLY 40 BAR / 600L INTERNAL COOLANT SUPPLY (ICS) WITH PAPER TYPE FILTER, 40 BAR/23 L/MIN / 600-L TANK 580 PSI/6 GALLON/MIN /160 GALLON INCL. ROTATING CLEAR-VIEW WINDOW, AIR PURGE FOR LINEAR MEASURING SYSTEM, BED FLUSHING
OIL AND EMULSION MIST SEPARATOR OIL AND EMULSION MIST SEPARATOR MECHANICAL
EXTENDED SWARF FLUSHING EXTENDED SWARF FLUSHING ADDITIONAL FLUSHING OF THE WORKING AREA DOOR LEFT HAND SIDE, Y AXIS AND RIGHT CABIN WALL VOLUME OF THE FLUSHING ADJUSTABLE MANUAL (ONLY IN COMBINATION WITH INTERNAL COOLANT)
MPC MACHINE PROTECTION CONTROL MPC MACHINE PROTECTION CONTROL MACHINE PROTECTION BY QUICK SHUTDOWN
AIR BLAST THROUGH SPINDLE CENTRE AIR BLAST THROUGH SPINDLE CENTRE SELECTION WITH M FUNCTION MAINTAINED AIR (1 DROP OIL PER 8MIN) (IN COMBINATION WITH ICS POSSIBLE)
MACHINE DOCUMENTATION ON CD-ROM MACHINE DOCUMENTATION ON CD-ROM: OPERATING INSTRUCTIONS, PROGRAMMING INSTRUCTIONS, TECHNIC MECHANICAL, TECHNIC ELECTRICAL, PARTS CATALOGUE
OPERATION MODE 4 OPERATION MODE 4 PROCESS MONITORING IN THE PRODUCTION MANUAL INTERVENTION WITH OPEN DOORS OF MACHINING AREA. RELEASE AFTER CHECK LIST HAS BEEN FILLED IN.
NETSERVICE (CELOS) NETSERVICE QUALIFIED SUPPORT BY INTERNET-BASED REMOTE DIAGNOSTICS
SERVICE AGENT (CELOS) SERVICE AGENT (CELOS) OVERVIEW OF ALL MAINTENANCE WORK ON THE MACHINE
MESSENGER (CELOS) MESENGER (CELOS) CLEAR LIVE STATUS OF THE NETWORKED MACHINES
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-tangential type lh-50 a, make werner & pfleiderer, tangential rotor geometry, chamber volume 88 ltr., useful volume 60 ltr., batch capacity 75 kg, drop door, pneumatic hopper, uni-drive gearbox, 280 kw dc drive, rotror speed 10-50 rpm,.
control siemens s-7 TANGENTIAL TYPE LH-50 A, MAKE WERNER & PFLEIDERER, TANGENTIAL ROTOR GEOMETRY, CHAMBER VOLUME 88 LTR., USEFUL VOLUME 60 LTR., BATCH CAPACITY 75 KG, DROP DOOR, PNEUMATIC HOPPER, UNI-DRIVE GEARBOX, 280 KW DC DRIVE, ROTROR SPEED 10-50 RPM,. CONTROL SIEMENS S-7
Vendedor: DEWIKO.de Inh. Kicinski
Año de construcción: usado
Ubicación:
general
universal machining centre; control: 3d-control siemens 840d sl operate
technical data
feed rate longitudinal/transverse/vertical 80000/80000/80000 mm/min
rapid traverse longitudinal/transverse/vertical 80/80/80 m/min
working area 1
longitudinal 1000 mm
cross 900 mm
vertical 700 mm
tool changer
type of magazine chain
type of gripper double gripper
number of tools 60
max. tool weight 6 kg
max. tool length 300 mm
max. tool diameter with occupied adjacent pockets 80 mm
max. tool dia. with free neighbouring pockets 130 mm
floor space/weight
weight approx. 17500 kg


dynamic package dmu 100 evo linear dynamic package for dmu 100 evo linear linear drive x/y-axis with 80 m/min // 262.48 ft/min rapid feed x/y/z 80 m/min // 262.48 ft/min, acceleration x/y/z 8 m/s² // 26.25 ft/s² active chiller for main spindle, lineardrives and table
nc swivel rotary table nc rotary table with swivel axis, direct measuring systems, incl. cooling of the table
table surface 950 x 800 mm
4. axes (swivelling range) 360 x 0,001 degree
rotation speed max.4. axis 40 rpm
distance between t-slots 63 mm
number of slots 11
slot width 14 mm
maximum load (table centre) 750 kg
centre bore 30h6 mm
5. axes (swivelling range) -5/+110 x 0,001 degree
rotation speed 5. axis 40 rpm
spindle speed up to 18,000 rpm hsk-a63 spindle speed up to 18,000 rpm hsk-a63 ac-motor spindle vertical, digital controlled lubrication: oil-air lubrication spindle cooling: circulating water cooling adaption of spindle and tool magazin (differently from standard)
drive power (100% dc) 25 kw
torque (100% dc) 87 nm
drive power (40% dc) 35 kw
torque (40% dc) 130 nm
speed range 20 - 18.000 rpm
spindle taper hsk-a 63
chain-type tool magazine 60 pockets tool magazine with 60 positions, chain type with double gripper (differently from standard)
direct measuring system direct path measuring system
cabine full protection cabin
3d quick set 3d quickset tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
laser tool measuring,swiveling laser tool measuring of tool length and diameter, automatically turn away of the measuring unit under table level including calibration tool
spindle utilisation detector spindle utilisation detector for main drive, integrated in headstock covering
internal coolant supply 40/80bar/980l internal coolant supply for spindle speed from 18,000 rpm ics with paper type filter 40/80 bar switchable / 23 / 11 l/min/ 980-l tank / 580/1160 psi / 6/2.9 gallon/min / 258.9 gallon tank air purge for linear measuring system rotating clear-view window be
swarf conveyor swarf conveyor, scraper type with slotted hole screen
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area. release after check list has been filled in.
dmg mori netservice - client dmg mori netservice - client qualified support by internet-based remote diagnostics will be installed on an external pc!
.gif" alt="Land-

general
universal machining centre; control: 3d-control siemens 840d sl operate
technical data
feed rate longitudinal/transverse/vertical 80000/80000/80000 mm/min
rapid traverse longitudinal/transverse/vertical 80/80/80 m/min
working area 1
longitudinal 1000 mm
cross 900 mm
vertical 700 mm
tool changer
type of magazine chain
type of gripper double gripper
number of tools 60
max. tool weight 6 kg
max. tool length 300 mm
max. tool diameter with occupied adjacent pockets 80 mm
max. tool dia. with free neighbouring pockets 130 mm
floor space/weight
weight approx. 17500 kg


dynamic package dmu 100 evo linear dynamic package for dmu 100 evo linear linear drive x/y-axis with 80 m/min // 262.48 ft/min rapid feed x/y/z 80 m/min // 262.48 ft/min, acceleration x/y/z 8 m/s² // 26.25 ft/s² active chiller for main spindle, lineardrives and table
nc swivel rotary table nc rotary table with swivel axis, direct measuring systems, incl. cooling of the table
table surface 950 x 800 mm
4. axes (swivelling range) 360 x 0,001 degree
rotation speed max.4. axis 40 rpm
distance between t-slots 63 mm
number of slots 11
slot width 14 mm
maximum load (table centre) 750 kg
centre bore 30h6 mm
5. axes (swivelling range) -5/+110 x 0,001 degree
rotation speed 5. axis 40 rpm
spindle speed up to 18,000 rpm hsk-a63 spindle speed up to 18,000 rpm hsk-a63 ac-motor spindle vertical, digital controlled lubrication: oil-air lubrication spindle cooling: circulating water cooling adaption of spindle and tool magazin (differently from standard)
drive power (100% dc) 25 kw
torque (100% dc) 87 nm
drive power (40% dc) 35 kw
torque (40% dc) 130 nm
speed range 20 - 18.000 rpm
spindle taper hsk-a 63
chain-type tool magazine 60 pockets tool magazine with 60 positions, chain type with double gripper (differently from standard)
direct measuring system direct path measuring system
cabine full protection cabin
3d quick set 3d quickset tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
laser tool measuring,swiveling laser tool measuring of tool length and diameter, automatically turn away of the measuring unit under table level including calibration tool
spindle utilisation detector spindle utilisation detector for main drive, integrated in headstock covering
internal coolant supply 40/80bar/980l internal coolant supply for spindle speed from 18,000 rpm ics with paper type filter 40/80 bar switchable / 23 / 11 l/min/ 980-l tank / 580/1160 psi / 6/2.9 gallon/min / 258.9 gallon tank air purge for linear measuring system rotating clear-view window be
swarf conveyor swarf conveyor, scraper type with slotted hole screen
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area. release after check list has been filled in.
dmg mori netservice - client dmg mori netservice - client qualified support by internet-based remote diagnostics will be installed on an external pc!
" style="height: 18px;">

GENERAL
UNIVERSAL MACHINING CENTRE; CONTROL: 3D-CONTROL SIEMENS 840D SL OPERATE
TECHNICAL DATA
FEED RATE LONGITUDINAL/TRANSVERSE/VERTICAL 80000/80000/80000 MM/MIN
RAPID TRAVERSE LONGITUDINAL/TRANSVERSE/VERTICAL 80/80/80 M/MIN
WORKING AREA 1
LONGITUDINAL 1000 MM
CROSS 900 MM
VERTICAL 700 MM
TOOL CHANGER
TYPE OF MAGAZINE CHAIN
TYPE OF GRIPPER DOUBLE GRIPPER
NUMBER OF TOOLS 60
MAX. TOOL WEIGHT 6 KG
MAX. TOOL LENGTH 300 MM
MAX. TOOL DIAMETER WITH OCCUPIED ADJACENT POCKETS 80 MM
MAX. TOOL DIA. WITH FREE NEIGHBOURING POCKETS 130 MM
FLOOR SPACE/WEIGHT
WEIGHT APPROX. 17500 KG


DYNAMIC PACKAGE DMU 100 EVO LINEAR DYNAMIC PACKAGE FOR DMU 100 EVO LINEAR LINEAR DRIVE X/Y-AXIS WITH 80 M/MIN // 262.48 FT/MIN RAPID FEED X/Y/Z 80 M/MIN // 262.48 FT/MIN, ACCELERATION X/Y/Z 8 M/S² // 26.25 FT/S² ACTIVE CHILLER FOR MAIN SPINDLE, LINEARDRIVES AND TABLE
NC SWIVEL ROTARY TABLE NC ROTARY TABLE WITH SWIVEL AXIS, DIRECT MEASURING SYSTEMS, INCL. COOLING OF THE TABLE
TABLE SURFACE 950 X 800 MM
4. AXES (SWIVELLING RANGE) 360 X 0,001 DEGREE
ROTATION SPEED MAX.4. AXIS 40 RPM
DISTANCE BETWEEN T-SLOTS 63 MM
NUMBER OF SLOTS 11
SLOT WIDTH 14 MM
MAXIMUM LOAD (TABLE CENTRE) 750 KG
CENTRE BORE 30H6 MM
5. AXES (SWIVELLING RANGE) -5/+110 X 0,001 DEGREE
ROTATION SPEED 5. AXIS 40 RPM
SPINDLE SPEED UP TO 18,000 RPM HSK-A63 SPINDLE SPEED UP TO 18,000 RPM HSK-A63 AC-MOTOR SPINDLE VERTICAL, DIGITAL CONTROLLED LUBRICATION: OIL-AIR LUBRICATION SPINDLE COOLING: CIRCULATING WATER COOLING ADAPTION OF SPINDLE AND TOOL MAGAZIN (DIFFERENTLY FROM STANDARD)
DRIVE POWER (100% DC) 25 KW
TORQUE (100% DC) 87 NM
DRIVE POWER (40% DC) 35 KW
TORQUE (40% DC) 130 NM
SPEED RANGE 20 - 18.000 RPM
SPINDLE TAPER HSK-A 63
CHAIN-TYPE TOOL MAGAZINE 60 POCKETS TOOL MAGAZINE WITH 60 POSITIONS, CHAIN TYPE WITH DOUBLE GRIPPER (DIFFERENTLY FROM STANDARD)
DIRECT MEASURING SYSTEM DIRECT PATH MEASURING SYSTEM
CABINE FULL PROTECTION CABIN
3D QUICK SET 3D QUICKSET TOOL KIT FOR CONTROL AND COMPENSATION OF THE CINEMATIC ACCURACY OF 5 AXIS MACHINE CONFIGURATIONS (ONLY WITH OPTION TOUCH PROBE)
LASER TOOL MEASURING,SWIVELING LASER TOOL MEASURING OF TOOL LENGTH AND DIAMETER, AUTOMATICALLY TURN AWAY OF THE MEASURING UNIT UNDER TABLE LEVEL INCLUDING CALIBRATION TOOL
SPINDLE UTILISATION DETECTOR SPINDLE UTILISATION DETECTOR FOR MAIN DRIVE, INTEGRATED IN HEADSTOCK COVERING
INTERNAL COOLANT SUPPLY 40/80BAR/980L INTERNAL COOLANT SUPPLY FOR SPINDLE SPEED FROM 18,000 RPM ICS WITH PAPER TYPE FILTER 40/80 BAR SWITCHABLE / 23 / 11 L/MIN/ 980-L TANK / 580/1160 PSI / 6/2.9 GALLON/MIN / 258.9 GALLON TANK AIR PURGE FOR LINEAR MEASURING SYSTEM ROTATING CLEAR-VIEW WINDOW BE
SWARF CONVEYOR SWARF CONVEYOR, SCRAPER TYPE WITH SLOTTED HOLE SCREEN
OPERATION MODE 4 OPERATION MODE 4 PROCESS MONITORING IN THE PRODUCTION MANUAL INTERVENTION WITH OPEN DOORS OF MACHINING AREA. RELEASE AFTER CHECK LIST HAS BEEN FILLED IN.
DMG MORI NETSERVICE - CLIENT DMG MORI NETSERVICE - CLIENT QUALIFIED SUPPORT BY INTERNET-BASED REMOTE DIAGNOSTICS WILL BE INSTALLED ON AN EXTERNAL PC!
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-control siemens sinumerik 840d powerline
turning diameter 200 mm
bar diameter 65 mm
spindle speeds 5,000 min-1
counter spindle
2 x 12-station turret with driven tools
y / b axis
tailstock
parts conveyor
suction
chip conveyor
bar loaderkupa CONTROL SIEMENS SINUMERIK 840D POWERLINE TURNING DIAMETER 200 MM BAR DIAMETER 65 MM SPINDLE SPEEDS 5,000 MIN-1 COUNTER SPINDLE 2 X 12-STATION TURRET WITH DRIVEN TOOLS Y / B AXIS TAILSTOCK PARTS CONVEYOR SUCTION CHIP CONVEYOR BAR LOADERKUPA
Vendedor: WMH24
Año de construcción: usado
Ubicación:
general
universal machining centre new dmg mori design; control: celos with siemens 840d sl operate
technical data
feed rate longitudinal/transverse/vertical 50000/50000/50000 mm/min
rapid traverse longitudinal/transverse/vertical 50/50/50 m/min
working area 1
longitudinal 400 mm
cross 400 mm
vertical 375 mm
tool changer
type of magazine chain
type of gripper double gripper
number of tools 60
max. tool weight 6 kg
max. tool length 300 mm
max. tool diameter with occupied adjacent pockets 80 mm
max. tool dia. with free neighbouring pockets 130 mm
floor space/weight
dimensions (l x w x h) 6,21 x 7,38 x 2,69 m
weight approx. 7200 kg


nc swivel rotary table nc rotary table with swivel axis, incl. cooling of the table
type of measuring system direct measuring system
table surface 450 x 400 mm
centre bore 30 mm
maximum load (table centre) 250 kg
rotation speed 5. axis 60 rpm
5. axes (swivelling range) -5/+110 degree
4. axes (swivelling range) 360 x 0,001 degree
rotation speed max.4. axis 60 rpm
distance between t-slots 63 mm
number of slots 5
slot width 14 mm
spindle speed 20.000 rpm, hsk-a63 motor spindle speedmaster® hsk-a63 spindle speed 20 - 20,000 min-1 output 35 kw / 25 kw (47 hp / 33 hp) torque 130 nm / 86 nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
chain-type tool magazine 60 pockets tool magazine with 60 positions, chain type with double gripper (differently from standard)
direct measuring system direct path measuring system
cabine full protection cabin
3d quick set 3d quickset tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
laser tool measuring, fixed laser tool measuring laserbridge mounted on table console including calibration tool
signal lamp 4-colour signal lamp 4-colour red: general error yellow: intervention necessary green: automatic mode blue: set-up mode
internal coolant supply 40bar/980l internal coolant supply (ics) paper type filter, 40 bar /23 l/min / 980 l tank, 580 psi/6 gallon/min /258.9 gallon, air purge for linear measuring system, bed flushing
oil and emulsion mist separator oil and emulsion mist separator mechanical
air blast through spindle centre air blast through spindle centre selection with m function maintained air (1 drop oil per 8min) (in combination with ics possible)
application tuning cycle atc application tuning cycle atc programmable feed parameter selection for machining task: accuracy/surface/speed
netservice (celos) netservice qualified support by internet-based remote diagnostics
service agent (celos) service agent (celos) overview of all maintenance work on the machine
messenger (celos) mesenger (celos) clear live status of the networked machines
special equipment - * dmg mori automation interface profibus, al - additional automatic loading door on right side of the machine - profibus communication with robot loading cycle - 2-channel safety circuits for emergency stop and protective fence hardwired on plug c
.gif" alt="Land-

general
universal machining centre new dmg mori design; control: celos with siemens 840d sl operate
technical data
feed rate longitudinal/transverse/vertical 50000/50000/50000 mm/min
rapid traverse longitudinal/transverse/vertical 50/50/50 m/min
working area 1
longitudinal 400 mm
cross 400 mm
vertical 375 mm
tool changer
type of magazine chain
type of gripper double gripper
number of tools 60
max. tool weight 6 kg
max. tool length 300 mm
max. tool diameter with occupied adjacent pockets 80 mm
max. tool dia. with free neighbouring pockets 130 mm
floor space/weight
dimensions (l x w x h) 6,21 x 7,38 x 2,69 m
weight approx. 7200 kg


nc swivel rotary table nc rotary table with swivel axis, incl. cooling of the table
type of measuring system direct measuring system
table surface 450 x 400 mm
centre bore 30 mm
maximum load (table centre) 250 kg
rotation speed 5. axis 60 rpm
5. axes (swivelling range) -5/+110 degree
4. axes (swivelling range) 360 x 0,001 degree
rotation speed max.4. axis 60 rpm
distance between t-slots 63 mm
number of slots 5
slot width 14 mm
spindle speed 20.000 rpm, hsk-a63 motor spindle speedmaster® hsk-a63 spindle speed 20 - 20,000 min-1 output 35 kw / 25 kw (47 hp / 33 hp) torque 130 nm / 86 nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
chain-type tool magazine 60 pockets tool magazine with 60 positions, chain type with double gripper (differently from standard)
direct measuring system direct path measuring system
cabine full protection cabin
3d quick set 3d quickset tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
laser tool measuring, fixed laser tool measuring laserbridge mounted on table console including calibration tool
signal lamp 4-colour signal lamp 4-colour red: general error yellow: intervention necessary green: automatic mode blue: set-up mode
internal coolant supply 40bar/980l internal coolant supply (ics) paper type filter, 40 bar /23 l/min / 980 l tank, 580 psi/6 gallon/min /258.9 gallon, air purge for linear measuring system, bed flushing
oil and emulsion mist separator oil and emulsion mist separator mechanical
air blast through spindle centre air blast through spindle centre selection with m function maintained air (1 drop oil per 8min) (in combination with ics possible)
application tuning cycle atc application tuning cycle atc programmable feed parameter selection for machining task: accuracy/surface/speed
netservice (celos) netservice qualified support by internet-based remote diagnostics
service agent (celos) service agent (celos) overview of all maintenance work on the machine
messenger (celos) mesenger (celos) clear live status of the networked machines
special equipment - * dmg mori automation interface profibus, al - additional automatic loading door on right side of the machine - profibus communication with robot loading cycle - 2-channel safety circuits for emergency stop and protective fence hardwired on plug c
" style="height: 18px;">

GENERAL
UNIVERSAL MACHINING CENTRE NEW DMG MORI DESIGN; CONTROL: CELOS WITH SIEMENS 840D SL OPERATE
TECHNICAL DATA
FEED RATE LONGITUDINAL/TRANSVERSE/VERTICAL 50000/50000/50000 MM/MIN
RAPID TRAVERSE LONGITUDINAL/TRANSVERSE/VERTICAL 50/50/50 M/MIN
WORKING AREA 1
LONGITUDINAL 400 MM
CROSS 400 MM
VERTICAL 375 MM
TOOL CHANGER
TYPE OF MAGAZINE CHAIN
TYPE OF GRIPPER DOUBLE GRIPPER
NUMBER OF TOOLS 60
MAX. TOOL WEIGHT 6 KG
MAX. TOOL LENGTH 300 MM
MAX. TOOL DIAMETER WITH OCCUPIED ADJACENT POCKETS 80 MM
MAX. TOOL DIA. WITH FREE NEIGHBOURING POCKETS 130 MM
FLOOR SPACE/WEIGHT
DIMENSIONS (L X W X H) 6,21 X 7,38 X 2,69 M
WEIGHT APPROX. 7200 KG


NC SWIVEL ROTARY TABLE NC ROTARY TABLE WITH SWIVEL AXIS, INCL. COOLING OF THE TABLE
TYPE OF MEASURING SYSTEM DIRECT MEASURING SYSTEM
TABLE SURFACE 450 X 400 MM
CENTRE BORE 30 MM
MAXIMUM LOAD (TABLE CENTRE) 250 KG
ROTATION SPEED 5. AXIS 60 RPM
5. AXES (SWIVELLING RANGE) -5/+110 DEGREE
4. AXES (SWIVELLING RANGE) 360 X 0,001 DEGREE
ROTATION SPEED MAX.4. AXIS 60 RPM
DISTANCE BETWEEN T-SLOTS 63 MM
NUMBER OF SLOTS 5
SLOT WIDTH 14 MM
SPINDLE SPEED 20.000 RPM, HSK-A63 MOTOR SPINDLE SPEEDMASTER® HSK-A63 SPINDLE SPEED 20 - 20,000 MIN-1 OUTPUT 35 KW / 25 KW (47 HP / 33 HP) TORQUE 130 NM / 86 NM (96 FT LBS / 63 FT LBS) (40 / 100 % DUTY CYCLE)
CHAIN-TYPE TOOL MAGAZINE 60 POCKETS TOOL MAGAZINE WITH 60 POSITIONS, CHAIN TYPE WITH DOUBLE GRIPPER (DIFFERENTLY FROM STANDARD)
DIRECT MEASURING SYSTEM DIRECT PATH MEASURING SYSTEM
CABINE FULL PROTECTION CABIN
3D QUICK SET 3D QUICKSET TOOL KIT FOR CONTROL AND COMPENSATION OF THE CINEMATIC ACCURACY OF 5 AXIS MACHINE CONFIGURATIONS (ONLY WITH OPTION TOUCH PROBE)
LASER TOOL MEASURING, FIXED LASER TOOL MEASURING LASERBRIDGE MOUNTED ON TABLE CONSOLE INCLUDING CALIBRATION TOOL
SIGNAL LAMP 4-COLOUR SIGNAL LAMP 4-COLOUR RED: GENERAL ERROR YELLOW: INTERVENTION NECESSARY GREEN: AUTOMATIC MODE BLUE: SET-UP MODE
INTERNAL COOLANT SUPPLY 40BAR/980L INTERNAL COOLANT SUPPLY (ICS) PAPER TYPE FILTER, 40 BAR /23 L/MIN / 980 L TANK, 580 PSI/6 GALLON/MIN /258.9 GALLON, AIR PURGE FOR LINEAR MEASURING SYSTEM, BED FLUSHING
OIL AND EMULSION MIST SEPARATOR OIL AND EMULSION MIST SEPARATOR MECHANICAL
AIR BLAST THROUGH SPINDLE CENTRE AIR BLAST THROUGH SPINDLE CENTRE SELECTION WITH M FUNCTION MAINTAINED AIR (1 DROP OIL PER 8MIN) (IN COMBINATION WITH ICS POSSIBLE)
APPLICATION TUNING CYCLE ATC APPLICATION TUNING CYCLE ATC PROGRAMMABLE FEED PARAMETER SELECTION FOR MACHINING TASK: ACCURACY/SURFACE/SPEED
NETSERVICE (CELOS) NETSERVICE QUALIFIED SUPPORT BY INTERNET-BASED REMOTE DIAGNOSTICS
SERVICE AGENT (CELOS) SERVICE AGENT (CELOS) OVERVIEW OF ALL MAINTENANCE WORK ON THE MACHINE
MESSENGER (CELOS) MESENGER (CELOS) CLEAR LIVE STATUS OF THE NETWORKED MACHINES
SPECIAL EQUIPMENT - * DMG MORI AUTOMATION INTERFACE PROFIBUS, AL - ADDITIONAL AUTOMATIC LOADING DOOR ON RIGHT SIDE OF THE MACHINE - PROFIBUS COMMUNICATION WITH ROBOT LOADING CYCLE - 2-CHANNEL SAFETY CIRCUITS FOR EMERGENCY STOP AND PROTECTIVE FENCE HARDWIRED ON PLUG C
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-technical features:

huron kx 30 vertical machining center:
•annee: 2001
digital •commande siemens 840 d
•courses x × y × z: 1 800 × 1 000 × 600 [mm] table •surface: 2 000 × 1,000 [mm] max •charge on table: 2500 [kg] •magasin tools: 30 [pos] •vitesse pin: 24 000 [rpm] •type pin: hsk 63 a •puissance: 18/20 [kw] fast •avances : 30,000 [mm/min] •avances work: 0 - 10,000 [mm/min] •poids: 17,000 [kg] equipment:
• watering by the center of the tool 15 bars
• blowing air by centre pin
• probe tools
• conveyor chip prices and delivery time: contact us

technical characteristics and photos without commitment - available unless sold - regulations to be agreed.
 TECHNICAL FEATURES: HURON KX 30 VERTICAL MACHINING CENTER: •ANNEE: 2001 DIGITAL •COMMANDE SIEMENS 840 D •COURSES X × Y × Z: 1 800 × 1 000 × 600 [MM] TABLE •SURFACE: 2 000 × 1,000 [MM] MAX •CHARGE ON TABLE: 2500 [KG] •MAGASIN TOOLS: 30 [POS] •VITESSE PIN: 24 000 [RPM] •TYPE PIN: HSK 63 A •PUISSANCE: 18/20 [KW] FAST •AVANCES : 30,000 [MM/MIN] •AVANCES WORK: 0 - 10,000 [MM/MIN] •POIDS: 17,000 [KG] EQUIPMENT: • WATERING BY THE CENTER OF THE TOOL 15 BARS • BLOWING AIR BY CENTRE PIN • PROBE TOOLS • CONVEYOR CHIP PRICES AND DELIVERY TIME: CONTACT US TECHNICAL CHARACTERISTICS AND PHOTOS WITHOUT COMMITMENT - AVAILABLE UNLESS SOLD - REGULATIONS TO BE AGREED.
Vendedor: ETS AMANN SARL
Año de construcción: usado
Ubicación:
general
universal machining centre in monoblock construction; control: celos with siemens 840d sl fd operate
technical data
feed rate longitudinal/transverse/vertical 40000/40000/40000 mm/min
rapid traverse longitudinal/transverse/vertical 40/40/40 m/min
working area 1
longitudinal 1135 mm
cross 1050 mm
vertical 750 mm


nc swivel rotary table (a: tandem) nc swivel rotary table tandem drive table plate c-axis: d 1,050 x 850 mm / 41.3 x 33.5 in integrated in rigid table 1,200 mm x 850 mm / 47.2 in x 35.5 in 1x t-slot 14 h7 (alignment groove, table centre) 12 x t-slot 14 h12 (clamping grooves) permissible lo
package mill / turn hsk-a 100 package milling / turning: upgrade nc-swivel rotary table to milling - turning / direct drive table plate c-axis d 1050 mm / 41.34 in speed c-axis 500 rpm integrated balancing sensor main drive: motor spindle 12.000 rpm 44 kw / 59 hp (40% d.c.), 32 kw /
tool magazine, chain vert., 60 pockets tool magazine vertical chain magazine basic with 60 tool pockets
infrared measuring probe renishaw infrared measuring probe type renishaw omp 60
combination tool measuring in machining area m / t combination tool measuring in machining area maker blum laser laser-system for milling tools 3d touch-probe for turning tools
3d quickset extension package 3d quickset extension package for each further machine: software / password
spindle utilisation detector spindle utilisation detector for main drive, integrated in headstock covering
mpc machine protection control mpc machine protection control machine protection by quick shutdown
prod. package 80 bar, 980 l, frequency contr. (mt) production package (m / t): belt chip conveyor with coolant unit 980 l, paper band filter discharge height: 950 mm width: 1,170 mm internal coolant supply frequency controlled 10 bar/37l/min - 80 bar/31 l/min - through spindle centre (ad) stepless pressu
coolant tempering/internal coolant supply coolant tempering for internal coolant unit 980 lt / 259 gallon heating capacity max.: 3,000 w / 4 hp cooling capacity max.: 3,800 w / 5.1 hp
coolant ring jet cooland ring jet for vertical headstock, 15 water jets, 5 air jets
spray pistol with pump spray pistol with pump 2 bar/40 l/min 29 psi/10.4 gallon/min (theoretical pump performance)
oil and emulsion mist separator oil and emulsion mist separator mechanical filter throughput volume 1,100 m³/h
cooling cooling by air blast through spindle centre, selection with m function
mdynamics package deckel maho package mdynamics improved surface quality combined with reduced machining time
application tuning cycle atc application tuning cycle atc programmable feed parameter selection for machining task: accuracy/surface/speed
excentric machining excentric turning and milling operation
gearskiving gearskiving technology cycle for machining of straight or helical internal or external gears with conical shaped skiving tools
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area release after completed check list
netservice (celos) netservice qualified support by internet-based remote diagnostics
service agent (celos) service agent (celos) overview of all maintenance work on the machine
messenger (celos) mesenger (celos) clear live status of the networked machines
special equipment - screws on calcitweis: zinc coatet screws - screws on titangrau: black screws - row area tidy - no advertising from other company
special equipment - feed drives x-/y-axis with liquid cooling - recirculating ballscrew spindle y-/z-axis with liquid cooling
.gif" alt="Land-

general
universal machining centre in monoblock construction; control: celos with siemens 840d sl fd operate
technical data
feed rate longitudinal/transverse/vertical 40000/40000/40000 mm/min
rapid traverse longitudinal/transverse/vertical 40/40/40 m/min
working area 1
longitudinal 1135 mm
cross 1050 mm
vertical 750 mm


nc swivel rotary table (a: tandem) nc swivel rotary table tandem drive table plate c-axis: d 1,050 x 850 mm / 41.3 x 33.5 in integrated in rigid table 1,200 mm x 850 mm / 47.2 in x 35.5 in 1x t-slot 14 h7 (alignment groove, table centre) 12 x t-slot 14 h12 (clamping grooves) permissible lo
package mill / turn hsk-a 100 package milling / turning: upgrade nc-swivel rotary table to milling - turning / direct drive table plate c-axis d 1050 mm / 41.34 in speed c-axis 500 rpm integrated balancing sensor main drive: motor spindle 12.000 rpm 44 kw / 59 hp (40% d.c.), 32 kw /
tool magazine, chain vert., 60 pockets tool magazine vertical chain magazine basic with 60 tool pockets
infrared measuring probe renishaw infrared measuring probe type renishaw omp 60
combination tool measuring in machining area m / t combination tool measuring in machining area maker blum laser laser-system for milling tools 3d touch-probe for turning tools
3d quickset extension package 3d quickset extension package for each further machine: software / password
spindle utilisation detector spindle utilisation detector for main drive, integrated in headstock covering
mpc machine protection control mpc machine protection control machine protection by quick shutdown
prod. package 80 bar, 980 l, frequency contr. (mt) production package (m / t): belt chip conveyor with coolant unit 980 l, paper band filter discharge height: 950 mm width: 1,170 mm internal coolant supply frequency controlled 10 bar/37l/min - 80 bar/31 l/min - through spindle centre (ad) stepless pressu
coolant tempering/internal coolant supply coolant tempering for internal coolant unit 980 lt / 259 gallon heating capacity max.: 3,000 w / 4 hp cooling capacity max.: 3,800 w / 5.1 hp
coolant ring jet cooland ring jet for vertical headstock, 15 water jets, 5 air jets
spray pistol with pump spray pistol with pump 2 bar/40 l/min 29 psi/10.4 gallon/min (theoretical pump performance)
oil and emulsion mist separator oil and emulsion mist separator mechanical filter throughput volume 1,100 m³/h
cooling cooling by air blast through spindle centre, selection with m function
mdynamics package deckel maho package mdynamics improved surface quality combined with reduced machining time
application tuning cycle atc application tuning cycle atc programmable feed parameter selection for machining task: accuracy/surface/speed
excentric machining excentric turning and milling operation
gearskiving gearskiving technology cycle for machining of straight or helical internal or external gears with conical shaped skiving tools
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area release after completed check list
netservice (celos) netservice qualified support by internet-based remote diagnostics
service agent (celos) service agent (celos) overview of all maintenance work on the machine
messenger (celos) mesenger (celos) clear live status of the networked machines
special equipment - screws on calcitweis: zinc coatet screws - screws on titangrau: black screws - row area tidy - no advertising from other company
special equipment - feed drives x-/y-axis with liquid cooling - recirculating ballscrew spindle y-/z-axis with liquid cooling
" style="height: 18px;">

GENERAL
UNIVERSAL MACHINING CENTRE IN MONOBLOCK CONSTRUCTION; CONTROL: CELOS WITH SIEMENS 840D SL FD OPERATE
TECHNICAL DATA
FEED RATE LONGITUDINAL/TRANSVERSE/VERTICAL 40000/40000/40000 MM/MIN
RAPID TRAVERSE LONGITUDINAL/TRANSVERSE/VERTICAL 40/40/40 M/MIN
WORKING AREA 1
LONGITUDINAL 1135 MM
CROSS 1050 MM
VERTICAL 750 MM


NC SWIVEL ROTARY TABLE (A: TANDEM) NC SWIVEL ROTARY TABLE TANDEM DRIVE TABLE PLATE C-AXIS: D 1,050 X 850 MM / 41.3 X 33.5 IN INTEGRATED IN RIGID TABLE 1,200 MM X 850 MM / 47.2 IN X 35.5 IN 1X T-SLOT 14 H7 (ALIGNMENT GROOVE, TABLE CENTRE) 12 X T-SLOT 14 H12 (CLAMPING GROOVES) PERMISSIBLE LO
PACKAGE MILL / TURN HSK-A 100 PACKAGE MILLING / TURNING: UPGRADE NC-SWIVEL ROTARY TABLE TO MILLING - TURNING / DIRECT DRIVE TABLE PLATE C-AXIS D 1050 MM / 41.34 IN SPEED C-AXIS 500 RPM INTEGRATED BALANCING SENSOR MAIN DRIVE: MOTOR SPINDLE 12.000 RPM 44 KW / 59 HP (40% D.C.), 32 KW /
TOOL MAGAZINE, CHAIN VERT., 60 POCKETS TOOL MAGAZINE VERTICAL CHAIN MAGAZINE BASIC WITH 60 TOOL POCKETS
INFRARED MEASURING PROBE RENISHAW INFRARED MEASURING PROBE TYPE RENISHAW OMP 60
COMBINATION TOOL MEASURING IN MACHINING AREA M / T COMBINATION TOOL MEASURING IN MACHINING AREA MAKER BLUM LASER LASER-SYSTEM FOR MILLING TOOLS 3D TOUCH-PROBE FOR TURNING TOOLS
3D QUICKSET EXTENSION PACKAGE 3D QUICKSET EXTENSION PACKAGE FOR EACH FURTHER MACHINE: SOFTWARE / PASSWORD
SPINDLE UTILISATION DETECTOR SPINDLE UTILISATION DETECTOR FOR MAIN DRIVE, INTEGRATED IN HEADSTOCK COVERING
MPC MACHINE PROTECTION CONTROL MPC MACHINE PROTECTION CONTROL MACHINE PROTECTION BY QUICK SHUTDOWN
PROD. PACKAGE 80 BAR, 980 L, FREQUENCY CONTR. (MT) PRODUCTION PACKAGE (M / T): BELT CHIP CONVEYOR WITH COOLANT UNIT 980 L, PAPER BAND FILTER DISCHARGE HEIGHT: 950 MM WIDTH: 1,170 MM INTERNAL COOLANT SUPPLY FREQUENCY CONTROLLED 10 BAR/37L/MIN - 80 BAR/31 L/MIN - THROUGH SPINDLE CENTRE (AD) STEPLESS PRESSU
COOLANT TEMPERING/INTERNAL COOLANT SUPPLY COOLANT TEMPERING FOR INTERNAL COOLANT UNIT 980 LT / 259 GALLON HEATING CAPACITY MAX.: 3,000 W / 4 HP COOLING CAPACITY MAX.: 3,800 W / 5.1 HP
COOLANT RING JET COOLAND RING JET FOR VERTICAL HEADSTOCK, 15 WATER JETS, 5 AIR JETS
SPRAY PISTOL WITH PUMP SPRAY PISTOL WITH PUMP 2 BAR/40 L/MIN 29 PSI/10.4 GALLON/MIN (THEORETICAL PUMP PERFORMANCE)
OIL AND EMULSION MIST SEPARATOR OIL AND EMULSION MIST SEPARATOR MECHANICAL FILTER THROUGHPUT VOLUME 1,100 M³/H
COOLING COOLING BY AIR BLAST THROUGH SPINDLE CENTRE, SELECTION WITH M FUNCTION
MDYNAMICS PACKAGE DECKEL MAHO PACKAGE MDYNAMICS IMPROVED SURFACE QUALITY COMBINED WITH REDUCED MACHINING TIME
APPLICATION TUNING CYCLE ATC APPLICATION TUNING CYCLE ATC PROGRAMMABLE FEED PARAMETER SELECTION FOR MACHINING TASK: ACCURACY/SURFACE/SPEED
EXCENTRIC MACHINING EXCENTRIC TURNING AND MILLING OPERATION
GEARSKIVING GEARSKIVING TECHNOLOGY CYCLE FOR MACHINING OF STRAIGHT OR HELICAL INTERNAL OR EXTERNAL GEARS WITH CONICAL SHAPED SKIVING TOOLS
OPERATION MODE 4 OPERATION MODE 4 PROCESS MONITORING IN THE PRODUCTION MANUAL INTERVENTION WITH OPEN DOORS OF MACHINING AREA RELEASE AFTER COMPLETED CHECK LIST
NETSERVICE (CELOS) NETSERVICE QUALIFIED SUPPORT BY INTERNET-BASED REMOTE DIAGNOSTICS
SERVICE AGENT (CELOS) SERVICE AGENT (CELOS) OVERVIEW OF ALL MAINTENANCE WORK ON THE MACHINE
MESSENGER (CELOS) MESENGER (CELOS) CLEAR LIVE STATUS OF THE NETWORKED MACHINES
SPECIAL EQUIPMENT - SCREWS ON CALCITWEIS: ZINC COATET SCREWS - SCREWS ON TITANGRAU: BLACK SCREWS - ROW AREA TIDY - NO ADVERTISING FROM OTHER COMPANY
SPECIAL EQUIPMENT - FEED DRIVES X-/Y-AXIS WITH LIQUID COOLING - RECIRCULATING BALLSCREW SPINDLE Y-/Z-AXIS WITH LIQUID COOLING
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-steam boiler firetube loos universal ul-s-ie, 16 tons per hour, 16 bar

this boiler is three-pass single-flame tube/smoke tube type and it was delivered in 2003 by loos international. it can produce 16 tons / h saturated steam at 16 bar. it complete boiler with weishaupt low-nox, multifuel burner, economizer, gas control valves, combustion air fan and siemens simatic s7 controls. the boiler is still installed and in good operational condition.

the main characteristics:
made by: loos international in year 2003.
capacity: 16 tons / hour (12 mw), saturated steam
steam parameters: temperature 235 °c, max pressure 16 bar, saturated
burner type: weishaupt wkgl 70/2-a,
burner model: zm-1ln (multifuel, l
burner capacity: min. 1 100 kw - max. 12 000 kw.
fuel: natural gas & light fuel oil   STEAM BOILER FIRETUBE LOOS UNIVERSAL UL-S-IE, 16 TONS PER HOUR, 16 BAR THIS BOILER IS THREE-PASS SINGLE-FLAME TUBE/SMOKE TUBE TYPE AND IT WAS DELIVERED IN 2003 BY LOOS INTERNATIONAL. IT CAN PRODUCE 16 TONS / H SATURATED STEAM AT 16 BAR. IT COMPLETE BOILER WITH WEISHAUPT LOW-NOX, MULTIFUEL BURNER, ECONOMIZER, GAS CONTROL VALVES, COMBUSTION AIR FAN AND SIEMENS SIMATIC S7 CONTROLS. THE BOILER IS STILL INSTALLED AND IN GOOD OPERATIONAL CONDITION. THE MAIN CHARACTERISTICS: MADE BY: LOOS INTERNATIONAL IN YEAR 2003. CAPACITY: 16 TONS / HOUR (12 MW), SATURATED STEAM STEAM PARAMETERS: TEMPERATURE 235 °C, MAX PRESSURE 16 BAR, SATURATED BURNER TYPE: WEISHAUPT WKGL 70/2-A, BURNER MODEL: ZM-1LN (MULTIFUEL, L BURNER CAPACITY: MIN. 1 100 KW - MAX. 12 000 KW. FUEL: NATURAL GAS & LIGHT FUEL OIL
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec flowwrap sl5-110 slices-5servos pro-version<br><br>flowwrapping machine to do multipacks of slices without trays (cake, biscuits, bread, etc.). suitable for opp/pe, pt/pe, al/pe film material. fully automatic format adjustment using colour touchscreen and siemens components. reliable and smooth run through 5 high performance, european manufactured servo motors, automatic separation of hot parts and film when machine stops, modul to avoid crumps falling down. - technical specifications: packaging sizes (lxwxh in mm): a.) 90-400, 35-120, 5-40, b.) 100-400, 35-120, 15-60, c.) 130-400, 35-120, 30-85 | film width: 450mm | max. speed of the machine in neutral: 110 cycles/min | 9kw, 380v, 50hz | machine dimensions: l4300xw350xh1960mm | weight: 1300kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP SL5-110 SLICES-5SERVOS PRO-VERSION

FLOWWRAPPING MACHINE TO DO MULTIPACKS OF SLICES WITHOUT TRAYS (CAKE, BISCUITS, BREAD, ETC.). SUITABLE FOR OPP/PE, PT/PE, AL/PE FILM MATERIAL. FULLY AUTOMATIC FORMAT ADJUSTMENT USING COLOUR TOUCHSCREEN AND SIEMENS COMPONENTS. RELIABLE AND SMOOTH RUN THROUGH 5 HIGH PERFORMANCE, EUROPEAN MANUFACTURED SERVO MOTORS, AUTOMATIC SEPARATION OF HOT PARTS AND FILM WHEN MACHINE STOPS, MODUL TO AVOID CRUMPS FALLING DOWN. - TECHNICAL SPECIFICATIONS: PACKAGING SIZES (LXWXH IN MM): A.) 90-400, 35-120, 5-40, B.) 100-400, 35-120, 15-60, C.) 130-400, 35-120, 30-85 | FILM WIDTH: 450MM | MAX. SPEED OF THE MACHINE IN NEUTRAL: 110 CYCLES/MIN | 9KW, 380V, 50HZ | MACHINE DIMENSIONS: L4300XW350XH1960MM | WEIGHT: 1300KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-crate packer kettner blitzpac robot e 45 t1 50 000 bph

this machine is made by kettner (now part of krones group) in the year 1996. the line has packed glass bottles into 24-bottle standard crates with the capacity of 50.000 bph. this machine has single line configuration and it has 8 simultaneously working gripper heads each for 24 bottles. in-feeding conveyor is a part of this delivery. machine is in good working condition.

manufacturer: kettner gmbh (krones ag)
type: blitzpac e 45 t1
year: 1996
working capacity: 50.000 bph (max 350 cycles/h)
number of gripper heads 8
current configuration of a gripper 4 x 6 for 0.5 and 0.3 liters
serial number: 95/0672/352
voltage: 230/400 v - 32 a - 50 hz
control plc siemens simatic s5
machine dimension: 4 800 x 2 550 x 2 650 mm (lxwxh)   CRATE PACKER KETTNER BLITZPAC ROBOT E 45 T1 50 000 BPH THIS MACHINE IS MADE BY KETTNER (NOW PART OF KRONES GROUP) IN THE YEAR 1996. THE LINE HAS PACKED GLASS BOTTLES INTO 24-BOTTLE STANDARD CRATES WITH THE CAPACITY OF 50.000 BPH. THIS MACHINE HAS SINGLE LINE CONFIGURATION AND IT HAS 8 SIMULTANEOUSLY WORKING GRIPPER HEADS EACH FOR 24 BOTTLES. IN-FEEDING CONVEYOR IS A PART OF THIS DELIVERY. MACHINE IS IN GOOD WORKING CONDITION. MANUFACTURER: KETTNER GMBH (KRONES AG) TYPE: BLITZPAC E 45 T1 YEAR: 1996 WORKING CAPACITY: 50.000 BPH (MAX 350 CYCLES/H) NUMBER OF GRIPPER HEADS 8 CURRENT CONFIGURATION OF A GRIPPER 4 X 6 FOR 0.5 AND 0.3 LITERS SERIAL NUMBER: 95/0672/352 VOLTAGE: 230/400 V - 32 A - 50 HZ CONTROL PLC SIEMENS SIMATIC S5 MACHINE DIMENSION: 4 800 X 2 550 X 2 650 MM (LXWXH)
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec vertiwrap machine pro p60slt slanting quad<br><br>vertical form and fill machine to do quad-seal-bags. can be operated in slanting or vertical position to allow protection of easy breakable products like thin deep frozen food, thin sugar or bakery products, etc. siemens plc, large colour touchscreen, servo motor film pulling, easy change of film roll. <br><br>- specifications: filling volume: 100-5000ml | bag size: l(150-480)xw(90-160)xd(50-100)mm | max. speed of the machine in neutral: 60 cycles/minute | film material: opp/cpp, poo/ce, pet/pe, etc | 380v, 7.5kw | 0.6m³, 6bar | machine dimensions: l1700xw950xh1900mm | weight: 1200kg.<br><br>that machine/system is available in different versions for different bag types, packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP MACHINE PRO P60SLT SLANTING QUAD

VERTICAL FORM AND FILL MACHINE TO DO QUAD-SEAL-BAGS. CAN BE OPERATED IN SLANTING OR VERTICAL POSITION TO ALLOW PROTECTION OF EASY BREAKABLE PRODUCTS LIKE THIN DEEP FROZEN FOOD, THIN SUGAR OR BAKERY PRODUCTS, ETC. SIEMENS PLC, LARGE COLOUR TOUCHSCREEN, SERVO MOTOR FILM PULLING, EASY CHANGE OF FILM ROLL.

- SPECIFICATIONS: FILLING VOLUME: 100-5000ML | BAG SIZE: L(150-480)XW(90-160)XD(50-100)MM | MAX. SPEED OF THE MACHINE IN NEUTRAL: 60 CYCLES/MINUTE | FILM MATERIAL: OPP/CPP, POO/CE, PET/PE, ETC | 380V, 7.5KW | 0.6M³, 6BAR | MACHINE DIMENSIONS: L1700XW950XH1900MM | WEIGHT: 1200KG.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT BAG TYPES, PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)