200 ofertas

Año de construcción: usado
Precio: 14.750 €
Ubicación: Land-2 packing machine, carton erector, bedo - used -:
 
price at time of purchase of both machines: â?¬29.500.-(net) dismantled and loaded!
 
 
unit 1:
packing machine, carton erector, bedo - used -:
 
price from site: â?¬17.500.-(net), dismantled and loaded!
 
manufacturer: bedo
type: va 1125
year of constr.: 2016
unit processes currently 3 different formats
compressed air: 5-5.5 bar
voltage: 3/n/pe ac 400/230v 50 hz
control voltage: 24v
power: 14 a
new price: about â?¬40.000.-(net)
condition: good
 
 
 
unit 2:
packing machine, bedo - used -:
 
price from site: â?¬17.500.-(net), dismantled and loaded!
 
manufacturer: bedo
type: va 1115
year of constr.: 2016
unit processes currently 3 different formats
compressed air: 5-5.5 bar
voltage: 3/n/pe ac 400/230v 50 hz
control voltage: 24v
power: 14 a
new price: about â?¬40.000.-(net)
condition: good
 
 
 
company:
the company of bedo verpackungstechnik gmbh, lã¼beck, shows their carton on judge va 1125 in a special version for the combined bottom closure using hot glue as well as by means of wet adhesive tape. the case erector is able to process so called boxes, cartons according to fefco 0201 and 0200, mark. the machine is designed for a maximum size of 700 x 500 x 500 mm (l x w x h). the combined bottom sealing of the cartons can withstand severe transportation stress at a weight of up to 40 kg. also the lifting has panel with plain-text display a powered horizontal magazine, servo drives, wear-resistant linear axis, spindle settings for the format setting, programmable logic controller (siemens s 7-300), as well as a touch.
 
carton erector series 11 - reliable, flexible and economical to 20 cartons per minute.
folding boxes according to fefco 0200, 0201, 0209, and others all types of corrugated cardboard
carton sealing by means of hot glue, adhesive tape or wet adhesive tape
small to very large carton formats
one or two cardboard magazine
motor/pneumatic operation
no format parts 2 PACKING MACHINE, CARTON ERECTOR, BEDO - USED -: PRICE AT TIME OF PURCHASE OF BOTH MACHINES: Â?¬29.500.-(NET) DISMANTLED AND LOADED! UNIT 1: PACKING MACHINE, CARTON ERECTOR, BEDO - USED -: PRICE FROM SITE: Â?¬17.500.-(NET), DISMANTLED AND LOADED! MANUFACTURER: BEDO TYPE: VA 1125 YEAR OF CONSTR.: 2016 UNIT PROCESSES CURRENTLY 3 DIFFERENT FORMATS COMPRESSED AIR: 5-5.5 BAR VOLTAGE: 3/N/PE AC 400/230V 50 HZ CONTROL VOLTAGE: 24V POWER: 14 A NEW PRICE: ABOUT Â?¬40.000.-(NET) CONDITION: GOOD UNIT 2: PACKING MACHINE, BEDO - USED -: PRICE FROM SITE: Â?¬17.500.-(NET), DISMANTLED AND LOADED! MANUFACTURER: BEDO TYPE: VA 1115 YEAR OF CONSTR.: 2016 UNIT PROCESSES CURRENTLY 3 DIFFERENT FORMATS COMPRESSED AIR: 5-5.5 BAR VOLTAGE: 3/N/PE AC 400/230V 50 HZ CONTROL VOLTAGE: 24V POWER: 14 A NEW PRICE: ABOUT Â?¬40.000.-(NET) CONDITION: GOOD COMPANY: THE COMPANY OF BEDO VERPACKUNGSTECHNIK GMBH, LüBECK, SHOWS THEIR CARTON ON JUDGE VA 1125 IN A SPECIAL VERSION FOR THE COMBINED BOTTOM CLOSURE USING HOT GLUE AS WELL AS BY MEANS OF WET ADHESIVE TAPE. THE CASE ERECTOR IS ABLE TO PROCESS SO CALLED BOXES, CARTONS ACCORDING TO FEFCO 0201 AND 0200, MARK. THE MACHINE IS DESIGNED FOR A MAXIMUM SIZE OF 700 X 500 X 500 MM (L X W X H). THE COMBINED BOTTOM SEALING OF THE CARTONS CAN WITHSTAND SEVERE TRANSPORTATION STRESS AT A WEIGHT OF UP TO 40 KG. ALSO THE LIFTING HAS PANEL WITH PLAIN-TEXT DISPLAY A POWERED HORIZONTAL MAGAZINE, SERVO DRIVES, WEAR-RESISTANT LINEAR AXIS, SPINDLE SETTINGS FOR THE FORMAT SETTING, PROGRAMMABLE LOGIC CONTROLLER (SIEMENS S 7-300), AS WELL AS A TOUCH. CARTON ERECTOR SERIES 11 - RELIABLE, FLEXIBLE AND ECONOMICAL TO 20 CARTONS PER MINUTE. FOLDING BOXES ACCORDING TO FEFCO 0200, 0201, 0209, AND OTHERS ALL TYPES OF CORRUGATED CARDBOARD CARTON SEALING BY MEANS OF HOT GLUE, ADHESIVE TAPE OR WET ADHESIVE TAPE SMALL TO VERY LARGE CARTON FORMATS ONE OR TWO CARDBOARD MAGAZINE MOTOR/PNEUMATIC OPERATION NO FORMAT PARTS
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-number of spindles: 6 st.<br/>working width: 230 mm<br/>working height: 120 mm<br/>length of the planing table: 2000 mm<br/>feed motor: 3 kw<br/>feed speed: 5-30 m/min.<br/>control: cnc <br/>weinig powermat 500 for window production with strip separation<br/>-------------------------------------------------- ---------------------<br/><br/>executive summary:<br/>-------------------------------------------------- ---------------------<br/>6 spindles hsk / powerlock with 7.5 kw and 8000 u / min each<br/>window package with glazing bead removal<br/>width, height and feed controlled by memory function<br/><br/><br/>detailed description:<br/>-------------------------------------------------- ---------------------<br/><br/>technical specifications:<br/>-------------------------<br/>working width 20 - 230 mm (with tool circle 93 - 125 mm)<br/>working height 8 - 120 mm (with tool circle 93 - 125 mm)<br/><br/>1. tool holder powerlock / hsk<br/>------------------------------<br/>first lower tool holder<br/>motor with brake 7.5 kw<br/>speed 8,000 rpm<br/>including high performance ball bearings<br/>tool circle 125 - 180 mm<br/>in conjunction with powerlock 93 - 180 mm<br/>tool circle fold cutters 130-160 mm<br/>adjustment axial 17 mm<br/>folding device<br/>marathoncoating in front of 1st lower tool holder<br/><br/>2. tool holder powerlock / hsk<br/>------------------------------<br/>first right tool holder<br/>motor with brake 7.5 kw<br/>speed 8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 200 mm<br/>maximum throat depth 35 mm<br/>adjustment axial for spindle 80 mm<br/>adjustment axial for powerlock 55 mm<br/>adjustment radial<br/>min. tool diameter at stop level 93 mm<br/>max. tool diameter behind stop level 200 mm<br/>electronic digital display for radial adjustment<br/>electronic digital display for axial adjustment<br/><br/>3. tool holder powerlock / hsk<br/>------------------------------<br/>first left tool holder<br/>motor with brake 7.5 kw<br/>speed 8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 200 mm<br/>tool circle for straight cutter heads max. 163 mm<br/>maximum throat depth 35 mm<br/>adjustment axial for spindle 80 mm<br/>adjustment axial for powerlock 55 mm<br/><br/>motorized axis adjustment radially via memory control<br/>electronic digital display for axial adjustment<br/><br/>4. tool holder powerlock / hsk<br/>------------------------------<br/>first upper tool holder<br/>motor with brake 7.5 kw<br/>speed 8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 200 mm<br/>tool circle for straight cutter heads max. 163 mm<br/>maximum throat depth 35 mm<br/>adjustment axial 40 mm<br/>motorized axis adjustment radially via memory control<br/>electronic digital display for axial adjustment<br/><br/>5. tool holder powerlock / hsk<br/>------------------------------<br/>second upper tool holder<br/>motor with brake 7.5 kw<br/>speed 8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 200 mm<br/>tool circle for straight cutter heads max. 163 mm<br/>maximum throat depth 35 mm<br/>adjustment axial 40 mm<br/>motorized axis adjustment radially via memory control<br/>electronic digital display for axial adjustment<br/><br/>6. tool holder powerlock / hsk<br/>------------------------------<br/>second lower tool holder<br/>motor with brake 7.5 kw<br/>speed 8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 225 mm<br/>maximum throat depth 15 mm<br/>adjustment axial 40 mm<br/>adjustment radial<br/>min. tool diameter to the table level 93 mm<br/>max. tool diameter 6 mm below table level 225 mm<br/>electronic digital display for radial adjustment<br/>electronic digital display for axial adjustment<br/><br/>all tool holders with high concentricity.<br/>lubrication points for the axial tool receiving movement.<br/><br/>feed system<br/>------------------------------<br/>frequency-controlled feed, 5 - 30 m / min.<br/>steplessly adjustable with brake 3 kw<br/>feed roller before 1. lower tool<br/>pneumatically controlled high-low<br/>durofer pointed toothed rollers (weinig patent)<br/>with depth limiter and self-cleaning<br/>adjustment of the feed rollers opposite<br/>left tool holder, axial 35 mm<br/><br/>cnc-controlled adjustment and positioning of the feed high / low in<br/>connection with the memory function<br/><br/>electrical machinery<br/>------------------------------<br/>operating voltage 400 volts<br/>(voltage range 380 x 420 volts), 50 hz<br/>electrical design according to din vde 0113,<br/>electrical equipment of industrial machinery<br/>en60204, iec-204-1. further electrical regulations<br/>are not included.<br/>control cabinet (with control panel) separate from<br/>machine, distance control cabinet machine: 2.5 m<br/><br/>machine stand, table and stops<br/>------------------------------<br/>table 2 m long (incl.<br/>manual waxilitpumpe for tischentarzung.<br/>a powered rubber roller in the exit table,<br/>50 mm wide.<br/><br/>pressure rollers and guides<br/>------------------------------<br/>pressure rollers from above, sprung<br/>lateral pressure roller on infeed table, sprung<br/><br/>machine operation<br/>------------------------------<br/>memory function<br/>to save the setting values of profiles.<br/>tool holder axes and pressure elements before and after<br/>the upper tool holder with<br/>electronic double ads.<br/>function:<br/>- save the settings of the manufactured profile by pressing a button<br/>under a profile number<br/>- when selecting the profile number again, the electronic<br/>double - display the setting values<br/>- by manually adjusting the tool holders and the<br/>print items are matched the ads<br/>- 99 memory locations<br/><br/>3 radial cnc-controlled adjustment and positioning of the tool holders<br/>in conjunction with memory function, spindle no. 3,4,5<br/><br/>cnc - controlled adjustment and positioning of the feed<br/>high / low in conjunction with the memory function<br/><br/>safety and sound insulation<br/>------------------------------<br/>safety - full fairing<br/>easily foldable safety hood with window covers<br/>the entire work area and protects against mechanical<br/>hazards.<br/>when lifting the safety hood tool holders<br/>and feed automatically switched off.<br/>for ce version, the safety cover is opened during<br/>of automatic mode not possible.<br/>electromagnetic locking of the safety hood<br/>(only after the tools have come to a standstill, approx. 15 seconds,<br/>can the hood be opened)<br/>the machine comes with ce mark and its associated<br/>ec declaration of conformity delivered.<br/>interior light in the safety hood<br/>for ripping works e.g. sawing and multiple profiling,<br/>you need suitable protection devices.<br/><br/>option: planing heads + molding tools<br/><br/>(technical data according to manufacturer - without guarantee!)<br/><br/><br/><br/><br/><br/> NUMBER OF SPINDLES: 6 ST.
WORKING WIDTH: 230 MM
WORKING HEIGHT: 120 MM
LENGTH OF THE PLANING TABLE: 2000 MM
FEED MOTOR: 3 KW
FEED SPEED: 5-30 M/MIN.
CONTROL: CNC
WEINIG POWERMAT 500 FOR WINDOW PRODUCTION WITH STRIP SEPARATION
-------------------------------------------------- ---------------------

EXECUTIVE SUMMARY:
-------------------------------------------------- ---------------------
6 SPINDLES HSK / POWERLOCK WITH 7.5 KW AND 8000 U / MIN EACH
WINDOW PACKAGE WITH GLAZING BEAD REMOVAL
WIDTH, HEIGHT AND FEED CONTROLLED BY MEMORY FUNCTION


DETAILED DESCRIPTION:
-------------------------------------------------- ---------------------

TECHNICAL SPECIFICATIONS:
-------------------------
WORKING WIDTH 20 - 230 MM (WITH TOOL CIRCLE 93 - 125 MM)
WORKING HEIGHT 8 - 120 MM (WITH TOOL CIRCLE 93 - 125 MM)

1. TOOL HOLDER POWERLOCK / HSK
------------------------------
FIRST LOWER TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED 8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 125 - 180 MM
IN CONJUNCTION WITH POWERLOCK 93 - 180 MM
TOOL CIRCLE FOLD CUTTERS 130-160 MM
ADJUSTMENT AXIAL 17 MM
FOLDING DEVICE
MARATHONCOATING IN FRONT OF 1ST LOWER TOOL HOLDER

2. TOOL HOLDER POWERLOCK / HSK
------------------------------
FIRST RIGHT TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED 8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 200 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL FOR SPINDLE 80 MM
ADJUSTMENT AXIAL FOR POWERLOCK 55 MM
ADJUSTMENT RADIAL
MIN. TOOL DIAMETER AT STOP LEVEL 93 MM
MAX. TOOL DIAMETER BEHIND STOP LEVEL 200 MM
ELECTRONIC DIGITAL DISPLAY FOR RADIAL ADJUSTMENT
ELECTRONIC DIGITAL DISPLAY FOR AXIAL ADJUSTMENT

3. TOOL HOLDER POWERLOCK / HSK
------------------------------
FIRST LEFT TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED 8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 200 MM
TOOL CIRCLE FOR STRAIGHT CUTTER HEADS MAX. 163 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL FOR SPINDLE 80 MM
ADJUSTMENT AXIAL FOR POWERLOCK 55 MM

MOTORIZED AXIS ADJUSTMENT RADIALLY VIA MEMORY CONTROL
ELECTRONIC DIGITAL DISPLAY FOR AXIAL ADJUSTMENT

4. TOOL HOLDER POWERLOCK / HSK
------------------------------
FIRST UPPER TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED 8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 200 MM
TOOL CIRCLE FOR STRAIGHT CUTTER HEADS MAX. 163 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL 40 MM
MOTORIZED AXIS ADJUSTMENT RADIALLY VIA MEMORY CONTROL
ELECTRONIC DIGITAL DISPLAY FOR AXIAL ADJUSTMENT

5. TOOL HOLDER POWERLOCK / HSK
------------------------------
SECOND UPPER TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED 8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 200 MM
TOOL CIRCLE FOR STRAIGHT CUTTER HEADS MAX. 163 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL 40 MM
MOTORIZED AXIS ADJUSTMENT RADIALLY VIA MEMORY CONTROL
ELECTRONIC DIGITAL DISPLAY FOR AXIAL ADJUSTMENT

6. TOOL HOLDER POWERLOCK / HSK
------------------------------
SECOND LOWER TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED 8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 225 MM
MAXIMUM THROAT DEPTH 15 MM
ADJUSTMENT AXIAL 40 MM
ADJUSTMENT RADIAL
MIN. TOOL DIAMETER TO THE TABLE LEVEL 93 MM
MAX. TOOL DIAMETER 6 MM BELOW TABLE LEVEL 225 MM
ELECTRONIC DIGITAL DISPLAY FOR RADIAL ADJUSTMENT
ELECTRONIC DIGITAL DISPLAY FOR AXIAL ADJUSTMENT

ALL TOOL HOLDERS WITH HIGH CONCENTRICITY.
LUBRICATION POINTS FOR THE AXIAL TOOL RECEIVING MOVEMENT.

FEED SYSTEM
------------------------------
FREQUENCY-CONTROLLED FEED, 5 - 30 M / MIN.
STEPLESSLY ADJUSTABLE WITH BRAKE 3 KW
FEED ROLLER BEFORE 1. LOWER TOOL
PNEUMATICALLY CONTROLLED HIGH-LOW
DUROFER POINTED TOOTHED ROLLERS (WEINIG PATENT)
WITH DEPTH LIMITER AND SELF-CLEANING
ADJUSTMENT OF THE FEED ROLLERS OPPOSITE
LEFT TOOL HOLDER, AXIAL 35 MM

CNC-CONTROLLED ADJUSTMENT AND POSITIONING OF THE FEED HIGH / LOW IN
CONNECTION WITH THE MEMORY FUNCTION

ELECTRICAL MACHINERY
------------------------------
OPERATING VOLTAGE 400 VOLTS
(VOLTAGE RANGE 380 X 420 VOLTS), 50 HZ
ELECTRICAL DESIGN ACCORDING TO DIN VDE 0113,
ELECTRICAL EQUIPMENT OF INDUSTRIAL MACHINERY
EN60204, IEC-204-1. FURTHER ELECTRICAL REGULATIONS
ARE NOT INCLUDED.
CONTROL CABINET (WITH CONTROL PANEL) SEPARATE FROM
MACHINE, DISTANCE CONTROL CABINET MACHINE: 2.5 M

MACHINE STAND, TABLE AND STOPS
------------------------------
TABLE 2 M LONG (INCL.
MANUAL WAXILITPUMPE FOR TISCHENTARZUNG.
A POWERED RUBBER ROLLER IN THE EXIT TABLE,
50 MM WIDE.

PRESSURE ROLLERS AND GUIDES
------------------------------
PRESSURE ROLLERS FROM ABOVE, SPRUNG
LATERAL PRESSURE ROLLER ON INFEED TABLE, SPRUNG

MACHINE OPERATION
------------------------------
MEMORY FUNCTION
TO SAVE THE SETTING VALUES OF PROFILES.
TOOL HOLDER AXES AND PRESSURE ELEMENTS BEFORE AND AFTER
THE UPPER TOOL HOLDER WITH
ELECTRONIC DOUBLE ADS.
FUNCTION:
- SAVE THE SETTINGS OF THE MANUFACTURED PROFILE BY PRESSING A BUTTON
UNDER A PROFILE NUMBER
- WHEN SELECTING THE PROFILE NUMBER AGAIN, THE ELECTRONIC
DOUBLE - DISPLAY THE SETTING VALUES
- BY MANUALLY ADJUSTING THE TOOL HOLDERS AND THE
PRINT ITEMS ARE MATCHED THE ADS
- 99 MEMORY LOCATIONS

3 RADIAL CNC-CONTROLLED ADJUSTMENT AND POSITIONING OF THE TOOL HOLDERS
IN CONJUNCTION WITH MEMORY FUNCTION, SPINDLE NO. 3,4,5

CNC - CONTROLLED ADJUSTMENT AND POSITIONING OF THE FEED
HIGH / LOW IN CONJUNCTION WITH THE MEMORY FUNCTION

SAFETY AND SOUND INSULATION
------------------------------
SAFETY - FULL FAIRING
EASILY FOLDABLE SAFETY HOOD WITH WINDOW COVERS
THE ENTIRE WORK AREA AND PROTECTS AGAINST MECHANICAL
HAZARDS.
WHEN LIFTING THE SAFETY HOOD TOOL HOLDERS
AND FEED AUTOMATICALLY SWITCHED OFF.
FOR CE VERSION, THE SAFETY COVER IS OPENED DURING
OF AUTOMATIC MODE NOT POSSIBLE.
ELECTROMAGNETIC LOCKING OF THE SAFETY HOOD
(ONLY AFTER THE TOOLS HAVE COME TO A STANDSTILL, APPROX. 15 SECONDS,
CAN THE HOOD BE OPENED)
THE MACHINE COMES WITH CE MARK AND ITS ASSOCIATED
EC DECLARATION OF CONFORMITY DELIVERED.
INTERIOR LIGHT IN THE SAFETY HOOD
FOR RIPPING WORKS E.G. SAWING AND MULTIPLE PROFILING,
YOU NEED SUITABLE PROTECTION DEVICES.

OPTION: PLANING HEADS + MOLDING TOOLS

(TECHNICAL DATA ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)





Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-<b>properties:</b>

used telescopic belt conveyor
condition: fully functional with traces of use
ideal for fast material handling
expertly disassembled and packed
color: blue
incl. feet
incl. control cabinet
incl lighting
optically and technically very well worked up!

<b>telescopic belt conveyor</b>

the telescopic belt conveyor is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. transportation of telescopic belt conveyors can promote sensitive and different-sized containers, boxes or other packaging and article units to the task or place of delivery and, for example, also serves as a connecting route before or between production and machinery. also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances.

<b>technical data:</b>

retracted length: 6,000 mm
extended footage: 16,000 mm
total width with stand: 1,650 mm
total width: 980 mm
belt width: 600 mm
strap type: smooth

<b>tailor-made solutions for your intralogistics</b>

we are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! gladly we will create you an individual offer or advise on the design or assembly questions. just let your needs and local conditions us to.

take advantage of our many years of experience and our excellent network of professionals. for companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.

together, we will work out ways to optimize your process and material flow cost effectively and sustainably. we can offer you even fully automatic sorting equipment or additional components such as picking racks or containers. <B>PROPERTIES:</B> USED TELESCOPIC BELT CONVEYOR CONDITION: FULLY FUNCTIONAL WITH TRACES OF USE IDEAL FOR FAST MATERIAL HANDLING EXPERTLY DISASSEMBLED AND PACKED COLOR: BLUE INCL. FEET INCL. CONTROL CABINET INCL LIGHTING OPTICALLY AND TECHNICALLY VERY WELL WORKED UP! <B>TELESCOPIC BELT CONVEYOR</B> THE TELESCOPIC BELT CONVEYOR IS IDEAL TO DOVETAIL MACHINES OR JOBS IN THE PICKING ZONE AND TO OPTIMIZE THE INTERNAL PROCESS. TRANSPORTATION OF TELESCOPIC BELT CONVEYORS CAN PROMOTE SENSITIVE AND DIFFERENT-SIZED CONTAINERS, BOXES OR OTHER PACKAGING AND ARTICLE UNITS TO THE TASK OR PLACE OF DELIVERY AND, FOR EXAMPLE, ALSO SERVES AS A CONNECTING ROUTE BEFORE OR BETWEEN PRODUCTION AND MACHINERY. ALSO ENABLES EFFICIENT PARTS IN OPERATING AND STORAGE AND IS DESIGNED TO PROMOTE SIGNIFICANT FLOW RATES AND DISTANCES. <B>TECHNICAL DATA:</B> RETRACTED LENGTH: 6,000 MM EXTENDED FOOTAGE: 16,000 MM TOTAL WIDTH WITH STAND: 1,650 MM TOTAL WIDTH: 980 MM BELT WIDTH: 600 MM STRAP TYPE: SMOOTH <B>TAILOR-MADE SOLUTIONS FOR YOUR INTRALOGISTICS</B> WE ARE YOUR COMPETENT PARTNER FOR ROLLER CONVEYORS, BELT LIFTS, INCLINED CONVEYORS OR TELESCOPES TO THE LOADING AND UNLOADING OF GOODS! GLADLY WE WILL CREATE YOU AN INDIVIDUAL OFFER OR ADVISE ON THE DESIGN OR ASSEMBLY QUESTIONS. JUST LET YOUR NEEDS AND LOCAL CONDITIONS US TO. TAKE ADVANTAGE OF OUR MANY YEARS OF EXPERIENCE AND OUR EXCELLENT NETWORK OF PROFESSIONALS. FOR COMPANIES OF VARIOUS INDUSTRIES, SUCH AS: LOGISTICS, PHARMACEUTICAL INDUSTRY, CRAFTS OR THE ELECTRONICS INDUSTRY WE HAVE ALREADY SUCCESSFULLY IMPLEMENTED PROJECTS. TOGETHER, WE WILL WORK OUT WAYS TO OPTIMIZE YOUR PROCESS AND MATERIAL FLOW COST EFFECTIVELY AND SUSTAINABLY. WE CAN OFFER YOU EVEN FULLY AUTOMATIC SORTING EQUIPMENT OR ADDITIONAL COMPONENTS SUCH AS PICKING RACKS OR CONTAINERS.
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Ubicación: Land-working width: 6000 mm<br/>working height: 3000 mm<br/>number of cylinders: 6 st.<br/>dimensions (l/w/h): 7500x2000x4120 mm<br/>weight: 5000 kg<br/>s + s frame press - fully automatic model super<br/>-------------------------------------------------- --------------<br/>ce version<br/><br/>the only self-transforming high performance frame press fully automatic,<br/>where the woods no longer need to be pre-plugged.<br/>the width and height adjustment is achieved by inserting the workpieces <br/>directly in<br/>the pressing area, without loss of time, accomplished.<br/>the frame press machine of the superclass.<br/><br/>basic machine in strongest frame welded construction, from oversized,<br/>thick wall special profiles.<br/>guideways for pressure beams and sliding slides in abrasion-resistant,<br/>wide planed version.<br/><br/>through abutment left in overweight design for<br/>breitenverpressung, built on base frame.<br/><br/>through abutment down in the heaviest execution<br/>directly connected to the base frame and machine base.<br/>insertion height 500 mm.<br/><br/>all abutment finely adjustable for absolute angular accuracy and<br/>long-term precision.<br/><br/>sliding carriage left with faster, automatic-motor<br/>width adjustment with guaranteed parallel operation. automatic, hydraulic<br/>blocking.<br/><br/>central drive for standard setting horizontal and vertical, with high input<br/>and adjustment speed and automatic width and height adjustment<br/>(opto-electronic).<br/><br/>2 vertical cylinders, double acting, with 250 mm cylinder stroke and 2000 kp<br/>pressure force, adjustable.<br/><br/>2 horizontal cylinders, double acting, with 80 mm cylinder stroke and 1850 kp<br/>pressure force, adjustable.<br/><br/>press corner top right, in heavy, milled version, with automatic<br/>eckeinstellung.<br/><br/>non-binding press corners<br/>plant surfaces in glue-repellent design<br/><br/><br/>8-fold holding and positioning device, for absolutely loose insertion<br/>of all individual woods in the pressing area (without preinstallation and <br/>plugging),<br/>i.e. each frame part is held and positioned twice.<br/><br/>automatic double clamping and positioning device for the upper frame timber,<br/>with integrated automatic workpiece transport<br/>(time and handling savings with large frames).<br/><br/>all frame single woods are placed directly in the press area.<br/><br/>program choices:<br/>manual motor via push button,<br/>fully automatic via optoelectronics for dimensional adjustment incl. automatic<br/>pressing cycle<br/>in conjunction with safety light barrier.<br/><br/>automatic, cycle-controlled pressing cycle<br/>pulsing, pressing vertically - loosening - pressing and releasing horizontally -<br/>press vertically / horizontally.<br/><br/>control cabinet conveniently located on the right side of the base frame.<br/>state-of-the-art plc control with fault diagnostics (batteryless).<br/>fast, opto-electronic dimensional adjustment.<br/><br/>hydraulic supply system adjustable from 25 to 100 bar.<br/><br/>electric hand control, freely positionable, for rapid work, especially<br/>in large and complicated frame constructions (with setting timbers and<br/>fighters) for one-man operation.<br/><br/>work safety package with safety light barrier.<br/><br/>electrical equipment:<br/>total connected load 3 kw, 400 v, 50 hz.<br/>pneumatic connection: r ¼ inch, max. 8 bar<br/><br/>paint finish: ral 7035 light gray, with ral 5018 turquoise blue<br/><br/>working size: length x height = 6000 x 3000 mm<br/><br/>with pre-inserted frame, the pressing height increases by 180 mm<br/><br/>equipment:<br/>-------------<br/>1 medium pressure working height 3000 mm with automatic adjustment<br/>in height, complete with pressure cylinder, pressure hose and shut-off valve<br/>single pressure control for medium pressure beams (for pressing of<br/>cross lattice windows)<br/><br/>2 pieces cross pressure device complete with pressure cylinder, infinitely <br/>adjustable,<br/>pressure hose and shut-off valve<br/><br/>single pressure control for cross pressure device (for pressing of<br/>cross lattice windows)<br/><br/>additional shut-off valve<br/><br/>interim allowance for miniature compression for bridging the 1st pressure beam,<br/>including shut-off valve on the 1st vertical cylinder.<br/><br/>triangle studio window pressing device (for manual operation only)<br/>consisting of:<br/>attachable, side guided pendulum printing plates, locking the<br/>vertical pressure beam, pneumatic clutch for central operation of the<br/>vertical pressure beam.<br/><br/>selector switch for activation of pneumatic hold-down in manual<br/>operation (sockwood pressing)<br/><br/>basic equipment for use of counter profiles<br/><br/>(technical data according to manufacturer - without guarantee!)<br/><br/>video 1 and video 2 show the offered machine in its present condition<br/>video 3 shows the same model<br/><br/><br/><br/><br/> WORKING WIDTH: 6000 MM
WORKING HEIGHT: 3000 MM
NUMBER OF CYLINDERS: 6 ST.
DIMENSIONS (L/W/H): 7500X2000X4120 MM
WEIGHT: 5000 KG
S + S FRAME PRESS - FULLY AUTOMATIC MODEL SUPER
-------------------------------------------------- --------------
CE VERSION

THE ONLY SELF-TRANSFORMING HIGH PERFORMANCE FRAME PRESS FULLY AUTOMATIC,
WHERE THE WOODS NO LONGER NEED TO BE PRE-PLUGGED.
THE WIDTH AND HEIGHT ADJUSTMENT IS ACHIEVED BY INSERTING THE WORKPIECES
DIRECTLY IN
THE PRESSING AREA, WITHOUT LOSS OF TIME, ACCOMPLISHED.
THE FRAME PRESS MACHINE OF THE SUPERCLASS.

BASIC MACHINE IN STRONGEST FRAME WELDED CONSTRUCTION, FROM OVERSIZED,
THICK WALL SPECIAL PROFILES.
GUIDEWAYS FOR PRESSURE BEAMS AND SLIDING SLIDES IN ABRASION-RESISTANT,
WIDE PLANED VERSION.

THROUGH ABUTMENT LEFT IN OVERWEIGHT DESIGN FOR
BREITENVERPRESSUNG, BUILT ON BASE FRAME.

THROUGH ABUTMENT DOWN IN THE HEAVIEST EXECUTION
DIRECTLY CONNECTED TO THE BASE FRAME AND MACHINE BASE.
INSERTION HEIGHT 500 MM.

ALL ABUTMENT FINELY ADJUSTABLE FOR ABSOLUTE ANGULAR ACCURACY AND
LONG-TERM PRECISION.

SLIDING CARRIAGE LEFT WITH FASTER, AUTOMATIC-MOTOR
WIDTH ADJUSTMENT WITH GUARANTEED PARALLEL OPERATION. AUTOMATIC, HYDRAULIC
BLOCKING.

CENTRAL DRIVE FOR STANDARD SETTING HORIZONTAL AND VERTICAL, WITH HIGH INPUT
AND ADJUSTMENT SPEED AND AUTOMATIC WIDTH AND HEIGHT ADJUSTMENT
(OPTO-ELECTRONIC).

2 VERTICAL CYLINDERS, DOUBLE ACTING, WITH 250 MM CYLINDER STROKE AND 2000 KP
PRESSURE FORCE, ADJUSTABLE.

2 HORIZONTAL CYLINDERS, DOUBLE ACTING, WITH 80 MM CYLINDER STROKE AND 1850 KP
PRESSURE FORCE, ADJUSTABLE.

PRESS CORNER TOP RIGHT, IN HEAVY, MILLED VERSION, WITH AUTOMATIC
ECKEINSTELLUNG.

NON-BINDING PRESS CORNERS
PLANT SURFACES IN GLUE-REPELLENT DESIGN


8-FOLD HOLDING AND POSITIONING DEVICE, FOR ABSOLUTELY LOOSE INSERTION
OF ALL INDIVIDUAL WOODS IN THE PRESSING AREA (WITHOUT PREINSTALLATION AND
PLUGGING),
I.E. EACH FRAME PART IS HELD AND POSITIONED TWICE.

AUTOMATIC DOUBLE CLAMPING AND POSITIONING DEVICE FOR THE UPPER FRAME TIMBER,
WITH INTEGRATED AUTOMATIC WORKPIECE TRANSPORT
(TIME AND HANDLING SAVINGS WITH LARGE FRAMES).

ALL FRAME SINGLE WOODS ARE PLACED DIRECTLY IN THE PRESS AREA.

PROGRAM CHOICES:
MANUAL MOTOR VIA PUSH BUTTON,
FULLY AUTOMATIC VIA OPTOELECTRONICS FOR DIMENSIONAL ADJUSTMENT INCL. AUTOMATIC
PRESSING CYCLE
IN CONJUNCTION WITH SAFETY LIGHT BARRIER.

AUTOMATIC, CYCLE-CONTROLLED PRESSING CYCLE
PULSING, PRESSING VERTICALLY - LOOSENING - PRESSING AND RELEASING HORIZONTALLY -
PRESS VERTICALLY / HORIZONTALLY.

CONTROL CABINET CONVENIENTLY LOCATED ON THE RIGHT SIDE OF THE BASE FRAME.
STATE-OF-THE-ART PLC CONTROL WITH FAULT DIAGNOSTICS (BATTERYLESS).
FAST, OPTO-ELECTRONIC DIMENSIONAL ADJUSTMENT.

HYDRAULIC SUPPLY SYSTEM ADJUSTABLE FROM 25 TO 100 BAR.

ELECTRIC HAND CONTROL, FREELY POSITIONABLE, FOR RAPID WORK, ESPECIALLY
IN LARGE AND COMPLICATED FRAME CONSTRUCTIONS (WITH SETTING TIMBERS AND
FIGHTERS) FOR ONE-MAN OPERATION.

WORK SAFETY PACKAGE WITH SAFETY LIGHT BARRIER.

ELECTRICAL EQUIPMENT:
TOTAL CONNECTED LOAD 3 KW, 400 V, 50 HZ.
PNEUMATIC CONNECTION: R ¼ INCH, MAX. 8 BAR

PAINT FINISH: RAL 7035 LIGHT GRAY, WITH RAL 5018 TURQUOISE BLUE

WORKING SIZE: LENGTH X HEIGHT = 6000 X 3000 MM

WITH PRE-INSERTED FRAME, THE PRESSING HEIGHT INCREASES BY 180 MM

EQUIPMENT:
-------------
1 MEDIUM PRESSURE WORKING HEIGHT 3000 MM WITH AUTOMATIC ADJUSTMENT
IN HEIGHT, COMPLETE WITH PRESSURE CYLINDER, PRESSURE HOSE AND SHUT-OFF VALVE
SINGLE PRESSURE CONTROL FOR MEDIUM PRESSURE BEAMS (FOR PRESSING OF
CROSS LATTICE WINDOWS)

2 PIECES CROSS PRESSURE DEVICE COMPLETE WITH PRESSURE CYLINDER, INFINITELY
ADJUSTABLE,
PRESSURE HOSE AND SHUT-OFF VALVE

SINGLE PRESSURE CONTROL FOR CROSS PRESSURE DEVICE (FOR PRESSING OF
CROSS LATTICE WINDOWS)

ADDITIONAL SHUT-OFF VALVE

INTERIM ALLOWANCE FOR MINIATURE COMPRESSION FOR BRIDGING THE 1ST PRESSURE BEAM,
INCLUDING SHUT-OFF VALVE ON THE 1ST VERTICAL CYLINDER.

TRIANGLE STUDIO WINDOW PRESSING DEVICE (FOR MANUAL OPERATION ONLY)
CONSISTING OF:
ATTACHABLE, SIDE GUIDED PENDULUM PRINTING PLATES, LOCKING THE
VERTICAL PRESSURE BEAM, PNEUMATIC CLUTCH FOR CENTRAL OPERATION OF THE
VERTICAL PRESSURE BEAM.

SELECTOR SWITCH FOR ACTIVATION OF PNEUMATIC HOLD-DOWN IN MANUAL
OPERATION (SOCKWOOD PRESSING)

BASIC EQUIPMENT FOR USE OF COUNTER PROFILES

(TECHNICAL DATA ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)

VIDEO 1 AND VIDEO 2 SHOW THE OFFERED MACHINE IN ITS PRESENT CONDITION
VIDEO 3 SHOWS THE SAME MODEL




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Precio: 9.950 €
Ubicación: Land-reverse loading lift table, 2 to 3 x 2 m, galvanized version - new -:
 
price from site: â?¬9.950.-(net)!
 
manufacturer: hymo (h + m pallet gmbh)
type: lx20-16/20/1-m
year of constr.: 2016 - reverse loading lift table but never built
former price: â?¬ 15.000.-(net)
condition: new
available: available now
location: 72419 neufra
 
reverse loading lift table - lifting table category 4 in accordance with en1570-1
technical data:
load capacity: 2000 kg
stroke: 1600 mm
height: 305 mm => plus 10 mm (item 3)
platform length: 3000 mm
platform width: 2000 mm
lifting / lowering time (ever): 37 sec
engine performance (s3 - 20% ed): 2.86 kw
operating voltage: 400 vac 3 ~ / n/pe / 50 hz
control voltage: 24 vdc
hydraulic unit/control: inside of the lifting table
platform extension: available upon request
standard lifting table equipment for - loading lifting tables:
mechanics:
-lower frame as profile design with mechanical end position stops,
with mounting holes to the shipping anchors
-scissors package profile steel with abschmierbaren bearings
(for increased lateral stability and reduced bearing load)
-8 mm teardrop with additional profile reinforced upper frame
-lifting eye
-service opening in the platform, screwed
hydraulic:
-unit with oil according to iso hm32
-piping between the cylinders and the hose connection to the unit
-cylinders with piston rod hard chromium-plated and abschmierbarer
-end-position cushioning in the cylinders, oil-filled minus side
electrics:
-standard motor in ip55, with cold conductor winding
-protection class ip65 e parts
-limit switch adjustable
-limit switch for safety contact strip
-deadman control with transformer, main switch provided on site
-hand button on the on/off/emergency off 3 m cable
security:
-safety contact edge interrupts the lowering process when touching below the platform-
-pipe burst safety valves in the cylinder
-maintenance support
-signs with safety note icons
operation and maintenance manual in german
painting:
-lifting table in ral 7046 tele grey or ral 5019 capri blue (other ral colors for the lifting table against)
additional charge possible)
-cylinder in ral 9005 jet black
-aggregate in ral 9005 jet black
standards:
-en1570-1, en982, en60204, internal work quality standard
-reverse loading lift tables are suitable for use outdoors (assembly / installation pit in accordance with our
installation drawing), however we recommend on the outdoor use a galvanized finish
please note the description of any subsequent accessories positions or in the listed
special accessories. deviations from the above described can accessories
standard equipment occur.
note: reverse loading lift tables are in the standard version with wheel loads (truck, car or)
forklift) system. therefore, a reinforcement of the platform is necessary, the we you at
necessary subsequently can offer.
note:
the controls (hand switch) is to plan / install, that use of the lifting table
this is can be viewed at any time on the platform, as well as below the platform. please
specify the control cable of the hand switch (standard length 3 m - mid lift table) in the
order.
the main power supply is to be provided with a main switch - both are building-side
services.
additional equipment:
hot dip galvanizing, scissors package/bottom frame/platform
-in accordance with the korrosivitã¤tskategorie c4
-without further top coat
wear rails electrically edited
-screwed on the top and bottom frame
attention:
the lifting table height is increased by 10 mm.
railings on the platform page
-with hands, knees running and bumper
-railing max. 1100 mm high
-bumper 150 mm high
-railing segment (1 pcs.) max 1500 mm long
-bolted to the platform
-on the platform side a-e
railing design plugin, without end switch monitoring
-with hands, knees running and bumper
-railing max. 1100 mm high
-bumper 150 mm high
-railing segment (1 pcs.) max 1500 mm long
-on the platform side b-f
hot-dip galvanized handrail segments
-for pos. 4 + 5
-in accordance with the korrosivitã¤tskategorie c4
-without further top coat
excess loading door, 200 x 450 mm
-on the platform side e-f
-throat depth 450 mm, width 200 mm
-construction galvanized without overarm - segments are individually operated REVERSE LOADING LIFT TABLE, 2 TO 3 X 2 M, GALVANIZED VERSION - NEW -: PRICE FROM SITE: &ACIRC;?&NOT;9.950.-(NET)! MANUFACTURER: HYMO (H + M PALLET GMBH) TYPE: LX20-16/20/1-M YEAR OF CONSTR.: 2016 - REVERSE LOADING LIFT TABLE BUT NEVER BUILT FORMER PRICE: &ACIRC;?&NOT; 15.000.-(NET) CONDITION: NEW AVAILABLE: AVAILABLE NOW LOCATION: 72419 NEUFRA REVERSE LOADING LIFT TABLE - LIFTING TABLE CATEGORY 4 IN ACCORDANCE WITH EN1570-1 TECHNICAL DATA: LOAD CAPACITY: 2000 KG STROKE: 1600 MM HEIGHT: 305 MM => PLUS 10 MM (ITEM 3) PLATFORM LENGTH: 3000 MM PLATFORM WIDTH: 2000 MM LIFTING / LOWERING TIME (EVER): 37 SEC ENGINE PERFORMANCE (S3 - 20% ED): 2.86 KW OPERATING VOLTAGE: 400 VAC 3 ~ / N/PE / 50 HZ CONTROL VOLTAGE: 24 VDC HYDRAULIC UNIT/CONTROL: INSIDE OF THE LIFTING TABLE PLATFORM EXTENSION: AVAILABLE UPON REQUEST STANDARD LIFTING TABLE EQUIPMENT FOR - LOADING LIFTING TABLES: MECHANICS: -LOWER FRAME AS PROFILE DESIGN WITH MECHANICAL END POSITION STOPS, WITH MOUNTING HOLES TO THE SHIPPING ANCHORS -SCISSORS PACKAGE PROFILE STEEL WITH ABSCHMIERBAREN BEARINGS (FOR INCREASED LATERAL STABILITY AND REDUCED BEARING LOAD) -8 MM TEARDROP WITH ADDITIONAL PROFILE REINFORCED UPPER FRAME -LIFTING EYE -SERVICE OPENING IN THE PLATFORM, SCREWED HYDRAULIC: -UNIT WITH OIL ACCORDING TO ISO HM32 -PIPING BETWEEN THE CYLINDERS AND THE HOSE CONNECTION TO THE UNIT -CYLINDERS WITH PISTON ROD HARD CHROMIUM-PLATED AND ABSCHMIERBARER -END-POSITION CUSHIONING IN THE CYLINDERS, OIL-FILLED MINUS SIDE ELECTRICS: -STANDARD MOTOR IN IP55, WITH COLD CONDUCTOR WINDING -PROTECTION CLASS IP65 E PARTS -LIMIT SWITCH ADJUSTABLE -LIMIT SWITCH FOR SAFETY CONTACT STRIP -DEADMAN CONTROL WITH TRANSFORMER, MAIN SWITCH PROVIDED ON SITE -HAND BUTTON ON THE ON/OFF/EMERGENCY OFF 3 M CABLE SECURITY: -SAFETY CONTACT EDGE INTERRUPTS THE LOWERING PROCESS WHEN TOUCHING BELOW THE PLATFORM- -PIPE BURST SAFETY VALVES IN THE CYLINDER -MAINTENANCE SUPPORT -SIGNS WITH SAFETY NOTE ICONS OPERATION AND MAINTENANCE MANUAL IN GERMAN PAINTING: -LIFTING TABLE IN RAL 7046 TELE GREY OR RAL 5019 CAPRI BLUE (OTHER RAL COLORS FOR THE LIFTING TABLE AGAINST) ADDITIONAL CHARGE POSSIBLE) -CYLINDER IN RAL 9005 JET BLACK -AGGREGATE IN RAL 9005 JET BLACK STANDARDS: -EN1570-1, EN982, EN60204, INTERNAL WORK QUALITY STANDARD -REVERSE LOADING LIFT TABLES ARE SUITABLE FOR USE OUTDOORS (ASSEMBLY / INSTALLATION PIT IN ACCORDANCE WITH OUR INSTALLATION DRAWING), HOWEVER WE RECOMMEND ON THE OUTDOOR USE A GALVANIZED FINISH PLEASE NOTE THE DESCRIPTION OF ANY SUBSEQUENT ACCESSORIES POSITIONS OR IN THE LISTED SPECIAL ACCESSORIES. DEVIATIONS FROM THE ABOVE DESCRIBED CAN ACCESSORIES STANDARD EQUIPMENT OCCUR. NOTE: REVERSE LOADING LIFT TABLES ARE IN THE STANDARD VERSION WITH WHEEL LOADS (TRUCK, CAR OR) FORKLIFT) SYSTEM. THEREFORE, A REINFORCEMENT OF THE PLATFORM IS NECESSARY, THE WE YOU AT NECESSARY SUBSEQUENTLY CAN OFFER. NOTE: THE CONTROLS (HAND SWITCH) IS TO PLAN / INSTALL, THAT USE OF THE LIFTING TABLE THIS IS CAN BE VIEWED AT ANY TIME ON THE PLATFORM, AS WELL AS BELOW THE PLATFORM. PLEASE SPECIFY THE CONTROL CABLE OF THE HAND SWITCH (STANDARD LENGTH 3 M - MID LIFT TABLE) IN THE ORDER. THE MAIN POWER SUPPLY IS TO BE PROVIDED WITH A MAIN SWITCH - BOTH ARE BUILDING-SIDE SERVICES. ADDITIONAL EQUIPMENT: HOT DIP GALVANIZING, SCISSORS PACKAGE/BOTTOM FRAME/PLATFORM -IN ACCORDANCE WITH THE KORROSIVIT&ATILDE;&CURREN;TSKATEGORIE C4 -WITHOUT FURTHER TOP COAT WEAR RAILS ELECTRICALLY EDITED -SCREWED ON THE TOP AND BOTTOM FRAME ATTENTION: THE LIFTING TABLE HEIGHT IS INCREASED BY 10 MM. RAILINGS ON THE PLATFORM PAGE -WITH HANDS, KNEES RUNNING AND BUMPER -RAILING MAX. 1100 MM HIGH -BUMPER 150 MM HIGH -RAILING SEGMENT (1 PCS.) MAX 1500 MM LONG -BOLTED TO THE PLATFORM -ON THE PLATFORM SIDE A-E RAILING DESIGN PLUGIN, WITHOUT END SWITCH MONITORING -WITH HANDS, KNEES RUNNING AND BUMPER -RAILING MAX. 1100 MM HIGH -BUMPER 150 MM HIGH -RAILING SEGMENT (1 PCS.) MAX 1500 MM LONG -ON THE PLATFORM SIDE B-F HOT-DIP GALVANIZED HANDRAIL SEGMENTS -FOR POS. 4 + 5 -IN ACCORDANCE WITH THE KORROSIVIT&ATILDE;&CURREN;TSKATEGORIE C4 -WITHOUT FURTHER TOP COAT EXCESS LOADING DOOR, 200 X 450 MM -ON THE PLATFORM SIDE E-F -THROAT DEPTH 450 MM, WIDTH 200 MM -CONSTRUCTION GALVANIZED WITHOUT OVERARM - SEGMENTS ARE INDIVIDUALLY OPERATED
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-internal diameter:250 mm<br/>grinding depth: mm<br/>swing diameter:460 mm<br/>workpiece diameter:455 (max.) mm<br/>workpiece length - max.:1000 mm<br/>table rotating:-4/+8 °<br/>table speeds:0-4000 mm/min<br/>max. workpiece weight:80 kg<br/>workhead - center taper:5 mk<br/>rotation speed of workhead :0 - 400 1/min<br/>workhead motor:4 kw<br/>3-jaw chuck:250 (selbstschließend) mm<br/>grinding motor:4 kw<br/>coolant pump:2,2 kw<br/>weight approx.:2,4 t<br/>machine dimensions:3200 x 2100 xx<br/>cnc controller:siemens 840 d <br/>servo motors: <br/>autom. sensing device for grinding wheel:option <br/>: <br/>linear scales and ballscrew:in allen achsen <br/>grinding wheel dresser: <br/>: <br/>fully enclosed: <br/>: <br/>technical documentation in german language: <br/>ce-design: <br/>signal lamp: <br/>face grinding attachement:durchmesser 125 mm<br/>clamping chuck:250 (selbstschließend), 1 satz harte backen, 1 satz weiche backen, 1 satz innen mm<br/>: <br/>magnetic and paper filter : <br/>levellig elements: <br/>frequency control main spindel engine:für die innenschleifeinrichtung <br/>internal grinding spindle:rpm 28.000, diam. 60 mm. min. diam. cap. 25 mm. x bohrung 50 mm, max. diam. cap. 100 mm. x bohrung 115 mm . <br/>internal grinding spindle:rpm 10.000, diam. 100 mm, min. diam. cap. 50 mm x bohrung 100 mm, max.diam. cap. 250 mm xbohrung 220 mm <br/>fixed steady rests:10-100 mm, 100-170 mm <br/><br/> performance and precision degree   robbi grinding machines are according to the international precision normes iso 2433. the table movement linearity is guaranteed by a max. deviation of  0,002 mm/mt.  the obtainable grinding roundness is :  0,4m (**)  (**)  for a test workpiece ground in our factory during machine testing        the cnc controls :  wheel head movement  (axis x) longitudinal table movement  (axis z) work head spindle rotation speed    the available programs permit the programming of the following grinding cycles  plunge  cylindrical pass   cylindrical pass with interpolation between table and wheel movement to grind taper workpieces radius   the software for the workpiece grinding operation is very simple and intuitive.   to facilitate the programming the software is equipped with an exemplifying graphics, to input the data for each parameter.      the software, has been specially studied, so as to permit also non specialised operators to programme without any problems complex workpieces.   when the workpiece grinding programme has been completed the cnc will automatically make up a summary list, where only the geometric parameters are evidenced.     this list permits with a  glance to verify the complete programme;  this operation is very helpful to verify eventual input data errors or to check rapidly a workpiece programme when reloaded from the file.        while the programme is in execution, it is possible to intervene and modify in real time the technologic parameters, such as:  increments, dwell inversion times, sparkout passes.   also, it is possible to intervene with the jog handwheel.      the grinding machine is composed of :    base  structure in normalised and stabilised cast iron with large ground guides.    the lubrication plant supplies a constant oil flow distributed over the complete length of the guides.    in the middle of the base, there is positioned the ball screw  for the table longitudinal movement.    on all the lower part of the perimeter are situated the recesses for machine levelling.  considering the base structure, usually a foundation is not required.    table   the table is manufactured in two parts, both are in normalised and stabilised cast iron.     the lower  part is composed of wide guides which are ground and accurately hand scrapped, for a better sliding.       the upper part, is swivelable in the two directions, suitable for grinding tapered workpieces.    it includes  a micrometric device with centesimal dial gauge for taper control.       workhead  the structure in normalised, stabilised and well ribbed cast iron, allows to support the workpiece weight and the force generated by the grinding operation.      the spindle rotates on high precision ball bearings, guaranteeing restricted tolerance and maximum rigidity in the working.      the spindle rotation is by means of a three phase motor with variable speed controlled by an inverter.  internal grinding spindle carriage  the structure is composed of a carriage, where the internal grinding spindle is located.    the working feed, is obtained by a re-circulating ball screw and preloaded nut.    the screw movement is assured by a brushless motor.       the incremental optic rule guarantees a wheelhead positioning precision of 0,001 mm.   internal grinding spindle  as there are many and various types of internal grinding spindles, according to the diameters and lengths that need to be ground, the machine is supplied without an internal grinding spindle, so that the customer may select which type is more suitable for his job.      the machine is manufactured standard with a belt transmission suitable for diam. mm. 60, diam. mm. 80 and diam. mm. 100 internal grinding spindles.      on request,  high frequency spindles may be assembled.   wheelhead  for face grinding the structure is composed of a carriage, where the face grinding device is located.    the positioning is obtained by an hydraulic cylinder.   the diamond dressing device is assembled on the face grinding device casing.   manual feed handwheels  electronic type, with double selection of the increments division 0.1 - 0.01 and 0.001 mm.  for wheelhead and table movements.     diamond dresser  the internal diamond dressing device is very strong and is positioned on the table.     it starts  hydraulically, when the dressing operation is selected, by the operator.     the dressing operation may be carried out manually or in automatic cycle.    equipment and electrical plant  in a cooled cabinet, separate from the machine.      hydraulic plant   the hydraulic power pack, is separate from the machine and activates the hydraulic diamond dresser and face grinding device.       lubrication plant the lubrication power pack, is separate from the machine and supplies continuous oil to the wheelhead guides.   the recovered oil is filtered and then resent to the power pack.     the re-circulating ball screw nut for the working feed, is grease lubricated.           coolant plant  large capacity tank for the coolant water, complete with electric equipment.       equipped with coolant magnet cleaner  and coolant paper roll cleaner.       protections  for the protection of the operator all movable parts are covered with suitable guards.     precisely: protection casing for belts, protection casing for grinding wheel and bellows for guides.   the machine is completely closed and the front protection is a sheet sliding doors with poly-carbonate shields.   a safety device, does not permit the automatic cycle to start if the front sliding doors are open.   INTERNAL DIAMETER:250 MM
GRINDING DEPTH: MM
SWING DIAMETER:460 MM
WORKPIECE DIAMETER:455 (MAX.) MM
WORKPIECE LENGTH - MAX.:1000 MM
TABLE ROTATING:-4/+8 °
TABLE SPEEDS:0-4000 MM/MIN
MAX. WORKPIECE WEIGHT:80 KG
WORKHEAD - CENTER TAPER:5 MK
ROTATION SPEED OF WORKHEAD :0 - 400 1/MIN
WORKHEAD MOTOR:4 KW
3-JAW CHUCK:250 (SELBSTSCHLIEßEND) MM
GRINDING MOTOR:4 KW
COOLANT PUMP:2,2 KW
WEIGHT APPROX.:2,4 T
MACHINE DIMENSIONS:3200 X 2100 XX
CNC CONTROLLER:SIEMENS 840 D
SERVO MOTORS:
AUTOM. SENSING DEVICE FOR GRINDING WHEEL:OPTION
:
LINEAR SCALES AND BALLSCREW:IN ALLEN ACHSEN
GRINDING WHEEL DRESSER:
:
FULLY ENCLOSED:
:
TECHNICAL DOCUMENTATION IN GERMAN LANGUAGE:
CE-DESIGN:
SIGNAL LAMP:
FACE GRINDING ATTACHEMENT:DURCHMESSER 125 MM
CLAMPING CHUCK:250 (SELBSTSCHLIEßEND), 1 SATZ HARTE BACKEN, 1 SATZ WEICHE BACKEN, 1 SATZ INNEN MM
:
MAGNETIC AND PAPER FILTER :
LEVELLIG ELEMENTS:
FREQUENCY CONTROL MAIN SPINDEL ENGINE:FüR DIE INNENSCHLEIFEINRICHTUNG
INTERNAL GRINDING SPINDLE:RPM 28.000, DIAM. 60 MM. MIN. DIAM. CAP. 25 MM. X BOHRUNG 50 MM, MAX. DIAM. CAP. 100 MM. X BOHRUNG 115 MM .
INTERNAL GRINDING SPINDLE:RPM 10.000, DIAM. 100 MM, MIN. DIAM. CAP. 50 MM X BOHRUNG 100 MM, MAX.DIAM. CAP. 250 MM XBOHRUNG 220 MM
FIXED STEADY RESTS:10-100 MM, 100-170 MM

PERFORMANCE AND PRECISION DEGREE ROBBI GRINDING MACHINES ARE ACCORDING TO THE INTERNATIONAL PRECISION NORMES ISO 2433. THE TABLE MOVEMENT LINEARITY IS GUARANTEED BY A MAX. DEVIATION OF 0,002 MM/MT. THE OBTAINABLE GRINDING ROUNDNESS IS : 0,4M (**) (**) FOR A TEST WORKPIECE GROUND IN OUR FACTORY DURING MACHINE TESTING THE CNC CONTROLS : WHEEL HEAD MOVEMENT (AXIS X) LONGITUDINAL TABLE MOVEMENT (AXIS Z) WORK HEAD SPINDLE ROTATION SPEED THE AVAILABLE PROGRAMS PERMIT THE PROGRAMMING OF THE FOLLOWING GRINDING CYCLES PLUNGE CYLINDRICAL PASS CYLINDRICAL PASS WITH INTERPOLATION BETWEEN TABLE AND WHEEL MOVEMENT TO GRIND TAPER WORKPIECES RADIUS THE SOFTWARE FOR THE WORKPIECE GRINDING OPERATION IS VERY SIMPLE AND INTUITIVE. TO FACILITATE THE PROGRAMMING THE SOFTWARE IS EQUIPPED WITH AN EXEMPLIFYING GRAPHICS, TO INPUT THE DATA FOR EACH PARAMETER. THE SOFTWARE, HAS BEEN SPECIALLY STUDIED, SO AS TO PERMIT ALSO NON SPECIALISED OPERATORS TO PROGRAMME WITHOUT ANY PROBLEMS COMPLEX WORKPIECES. WHEN THE WORKPIECE GRINDING PROGRAMME HAS BEEN COMPLETED THE CNC WILL AUTOMATICALLY MAKE UP A SUMMARY LIST, WHERE ONLY THE GEOMETRIC PARAMETERS ARE EVIDENCED. THIS LIST PERMITS WITH A GLANCE TO VERIFY THE COMPLETE PROGRAMME; THIS OPERATION IS VERY HELPFUL TO VERIFY EVENTUAL INPUT DATA ERRORS OR TO CHECK RAPIDLY A WORKPIECE PROGRAMME WHEN RELOADED FROM THE FILE. WHILE THE PROGRAMME IS IN EXECUTION, IT IS POSSIBLE TO INTERVENE AND MODIFY IN REAL TIME THE TECHNOLOGIC PARAMETERS, SUCH AS: INCREMENTS, DWELL INVERSION TIMES, SPARKOUT PASSES. ALSO, IT IS POSSIBLE TO INTERVENE WITH THE JOG HANDWHEEL. THE GRINDING MACHINE IS COMPOSED OF : BASE STRUCTURE IN NORMALISED AND STABILISED CAST IRON WITH LARGE GROUND GUIDES. THE LUBRICATION PLANT SUPPLIES A CONSTANT OIL FLOW DISTRIBUTED OVER THE COMPLETE LENGTH OF THE GUIDES. IN THE MIDDLE OF THE BASE, THERE IS POSITIONED THE BALL SCREW FOR THE TABLE LONGITUDINAL MOVEMENT. ON ALL THE LOWER PART OF THE PERIMETER ARE SITUATED THE RECESSES FOR MACHINE LEVELLING. CONSIDERING THE BASE STRUCTURE, USUALLY A FOUNDATION IS NOT REQUIRED. TABLE THE TABLE IS MANUFACTURED IN TWO PARTS, BOTH ARE IN NORMALISED AND STABILISED CAST IRON. THE LOWER PART IS COMPOSED OF WIDE GUIDES WHICH ARE GROUND AND ACCURATELY HAND SCRAPPED, FOR A BETTER SLIDING. THE UPPER PART, IS SWIVELABLE IN THE TWO DIRECTIONS, SUITABLE FOR GRINDING TAPERED WORKPIECES. IT INCLUDES A MICROMETRIC DEVICE WITH CENTESIMAL DIAL GAUGE FOR TAPER CONTROL. WORKHEAD THE STRUCTURE IN NORMALISED, STABILISED AND WELL RIBBED CAST IRON, ALLOWS TO SUPPORT THE WORKPIECE WEIGHT AND THE FORCE GENERATED BY THE GRINDING OPERATION. THE SPINDLE ROTATES ON HIGH PRECISION BALL BEARINGS, GUARANTEEING RESTRICTED TOLERANCE AND MAXIMUM RIGIDITY IN THE WORKING. THE SPINDLE ROTATION IS BY MEANS OF A THREE PHASE MOTOR WITH VARIABLE SPEED CONTROLLED BY AN INVERTER. INTERNAL GRINDING SPINDLE CARRIAGE THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE INTERNAL GRINDING SPINDLE IS LOCATED. THE WORKING FEED, IS OBTAINED BY A RE-CIRCULATING BALL SCREW AND PRELOADED NUT. THE SCREW MOVEMENT IS ASSURED BY A BRUSHLESS MOTOR. THE INCREMENTAL OPTIC RULE GUARANTEES A WHEELHEAD POSITIONING PRECISION OF 0,001 MM. INTERNAL GRINDING SPINDLE AS THERE ARE MANY AND VARIOUS TYPES OF INTERNAL GRINDING SPINDLES, ACCORDING TO THE DIAMETERS AND LENGTHS THAT NEED TO BE GROUND, THE MACHINE IS SUPPLIED WITHOUT AN INTERNAL GRINDING SPINDLE, SO THAT THE CUSTOMER MAY SELECT WHICH TYPE IS MORE SUITABLE FOR HIS JOB. THE MACHINE IS MANUFACTURED STANDARD WITH A BELT TRANSMISSION SUITABLE FOR DIAM. MM. 60, DIAM. MM. 80 AND DIAM. MM. 100 INTERNAL GRINDING SPINDLES. ON REQUEST, HIGH FREQUENCY SPINDLES MAY BE ASSEMBLED. WHEELHEAD FOR FACE GRINDING THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE FACE GRINDING DEVICE IS LOCATED. THE POSITIONING IS OBTAINED BY AN HYDRAULIC CYLINDER. THE DIAMOND DRESSING DEVICE IS ASSEMBLED ON THE FACE GRINDING DEVICE CASING. MANUAL FEED HANDWHEELS ELECTRONIC TYPE, WITH DOUBLE SELECTION OF THE INCREMENTS DIVISION 0.1 - 0.01 AND 0.001 MM. FOR WHEELHEAD AND TABLE MOVEMENTS. DIAMOND DRESSER THE INTERNAL DIAMOND DRESSING DEVICE IS VERY STRONG AND IS POSITIONED ON THE TABLE. IT STARTS HYDRAULICALLY, WHEN THE DRESSING OPERATION IS SELECTED, BY THE OPERATOR. THE DRESSING OPERATION MAY BE CARRIED OUT MANUALLY OR IN AUTOMATIC CYCLE. EQUIPMENT AND ELECTRICAL PLANT IN A COOLED CABINET, SEPARATE FROM THE MACHINE. HYDRAULIC PLANT THE HYDRAULIC POWER PACK, IS SEPARATE FROM THE MACHINE AND ACTIVATES THE HYDRAULIC DIAMOND DRESSER AND FACE GRINDING DEVICE. LUBRICATION PLANT THE LUBRICATION POWER PACK, IS SEPARATE FROM THE MACHINE AND SUPPLIES CONTINUOUS OIL TO THE WHEELHEAD GUIDES. THE RECOVERED OIL IS FILTERED AND THEN RESENT TO THE POWER PACK. THE RE-CIRCULATING BALL SCREW NUT FOR THE WORKING FEED, IS GREASE LUBRICATED. COOLANT PLANT LARGE CAPACITY TANK FOR THE COOLANT WATER, COMPLETE WITH ELECTRIC EQUIPMENT. EQUIPPED WITH COOLANT MAGNET CLEANER AND COOLANT PAPER ROLL CLEANER. PROTECTIONS FOR THE PROTECTION OF THE OPERATOR ALL MOVABLE PARTS ARE COVERED WITH SUITABLE GUARDS. PRECISELY: PROTECTION CASING FOR BELTS, PROTECTION CASING FOR GRINDING WHEEL AND BELLOWS FOR GUIDES. THE MACHINE IS COMPLETELY CLOSED AND THE FRONT PROTECTION IS A SHEET SLIDING DOORS WITH POLY-CARBONATE SHIELDS. A SAFETY DEVICE, DOES NOT PERMIT THE AUTOMATIC CYCLE TO START IF THE FRONT SLIDING DOORS ARE OPEN.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-a dispensing system is sold by the company ewotech
type: sdp 463

the plant is located in a very good condition and went right to the end.

she was employed as a dosing marinade bottling plant for steak.

you can dispense other liquid/paste-like products such as cream yogurt etc.

with the control, you can adjust the weight in grams or cc. and the speed of the kreiskolbenpumen and store depending on the product

the system is equipped with a supply hopper, product storage tank, approx. 250 litres. technical data metering pump sdp 463:

metering capacity: standard equipment sdp 463 gr = 3 x. 16 nv,.
up to 3 x 3,000 l/h b. 600 rev / min.

filling performance: the performance is dependent on product behavior, volume,
tank shape. mechanically up to 3 x 100 / minute.

filling temperature:-10 â° c up to 120 â° c (short term 150 â° c)

i am available for questions A DISPENSING SYSTEM IS SOLD BY THE COMPANY EWOTECH TYPE: SDP 463 THE PLANT IS LOCATED IN A VERY GOOD CONDITION AND WENT RIGHT TO THE END. SHE WAS EMPLOYED AS A DOSING MARINADE BOTTLING PLANT FOR STEAK. YOU CAN DISPENSE OTHER LIQUID/PASTE-LIKE PRODUCTS SUCH AS CREAM YOGURT ETC. WITH THE CONTROL, YOU CAN ADJUST THE WEIGHT IN GRAMS OR CC. AND THE SPEED OF THE KREISKOLBENPUMEN AND STORE DEPENDING ON THE PRODUCT THE SYSTEM IS EQUIPPED WITH A SUPPLY HOPPER, PRODUCT STORAGE TANK, APPROX. 250 LITRES. TECHNICAL DATA METERING PUMP SDP 463: METERING CAPACITY: STANDARD EQUIPMENT SDP 463 GR = 3 X. 16 NV,. UP TO 3 X 3,000 L/H B. 600 REV / MIN. FILLING PERFORMANCE: THE PERFORMANCE IS DEPENDENT ON PRODUCT BEHAVIOR, VOLUME, TANK SHAPE. MECHANICALLY UP TO 3 X 100 / MINUTE. FILLING TEMPERATURE:-10 &ACIRC;&DEG; C UP TO 120 &ACIRC;&DEG; C (SHORT TERM 150 &ACIRC;&DEG; C) I AM AVAILABLE FOR QUESTIONS
Vendedor: An-und Verkauf von Fleischereimaschinen
Año de construcción: usado
Ubicación: Land-internal diameter:300 mm<br/>grinding depth: mm<br/>swing diameter:300/350 mm<br/>workpiece length - max.:2300 mm<br/>table rotating:-2/+6 °<br/>table speeds:0-4000 mm/min<br/>max. workpiece weight:400 (fliegend, 150mm von der spindelnase) kg<br/>workhead - center taper:6 mk<br/>rotation speed of workhead :0 - 400 1/min<br/>workhead motor:4 kw<br/>3-jaw chuck:250 (selbstschließend) mm<br/>grinding motor:11 kw<br/>coolant pump:2,2 kw<br/>cnc controller:siemens 840 d oder sps von siemens <br/>servo motors: <br/>autom. sensing device for grinding wheel:option <br/>: <br/>linear scales and ballscrew:in allen achsen <br/>grinding wheel dresser: <br/>: <br/>fully enclosed: <br/>: <br/>technical documentation in german language: <br/>ce-design: <br/>signal lamp: <br/>face grinding attachement:durchmesser 125 mm<br/>clamping chuck:350 (selbst zentrierend) mm<br/>: <br/>magnetic and paper filter : <br/>levellig elements: <br/>frequency control main spindel engine:für die innenschleifeinrichtung <br/>internal grinding spindle:auf anfrage <br/>internal grinding spindle:auf anfrage <br/>fixed steady rests:10-100 mm, 100-170 mm <br/><br/> performance and precision degree   robbi grinding machines are according to the international precision normes iso 2433. the table movement linearity is guaranteed by a max. deviation of  0,002 mm/mt.  the obtainable grinding roundness is :  0,4m (**)  (**)  for a test workpiece ground in our factory during machine testing        the cnc controls :  wheel head movement  (axis x) longitudinal table movement  (axis z) work head spindle rotation speed    the available programs permit the programming of the following grinding cycles  plunge  cylindrical pass   cylindrical pass with interpolation between table and wheel movement to grind taper workpieces radius   the software for the workpiece grinding operation is very simple and intuitive.   to facilitate the programming the software is equipped with an exemplifying graphics, to input the data for each parameter.      the software, has been specially studied, so as to permit also non specialised operators to programme without any problems complex workpieces.   when the workpiece grinding programme has been completed the cnc will automatically make up a summary list, where only the geometric parameters are evidenced.     this list permits with a  glance to verify the complete programme;  this operation is very helpful to verify eventual input data errors or to check rapidly a workpiece programme when reloaded from the file.        while the programme is in execution, it is possible to intervene and modify in real time the technologic parameters, such as:  increments, dwell inversion times, sparkout passes.   also, it is possible to intervene with the jog handwheel.      the grinding machine is composed of :    base  structure in normalised and stabilised cast iron with large ground guides.    the lubrication plant supplies a constant oil flow distributed over the complete length of the guides.    in the middle of the base, there is positioned the ball screw  for the table longitudinal movement.    on all the lower part of the perimeter are situated the recesses for machine levelling.  considering the base structure, usually a foundation is not required.    table   the table is manufactured in two parts, both are in normalised and stabilised cast iron.     the lower  part is composed of wide guides which are ground and accurately hand scrapped, for a better sliding.       the upper part, is swivelable in the two directions, suitable for grinding tapered workpieces.    it includes  a micrometric device with centesimal dial gauge for taper control.       workhead  the structure in normalised, stabilised and well ribbed cast iron, allows to support the workpiece weight and the force generated by the grinding operation.      the spindle rotates on high precision ball bearings, guaranteeing restricted tolerance and maximum rigidity in the working.      the spindle rotation is by means of a three phase motor with variable speed controlled by an inverter.  internal grinding spindle carriage  the structure is composed of a carriage, where the internal grinding spindle is located.    the working feed, is obtained by a re-circulating ball screw and preloaded nut.    the screw movement is assured by a brushless motor.       the incremental optic rule guarantees a wheelhead positioning precision of 0,001 mm.   internal grinding spindle  as there are many and various types of internal grinding spindles, according to the diameters and lengths that need to be ground, the machine is supplied without an internal grinding spindle, so that the customer may select which type is more suitable for his job.      the machine is manufactured standard with a belt transmission suitable for diam. mm. 60, diam. mm. 80 and diam. mm. 100 internal grinding spindles.      on request,  high frequency spindles may be assembled.   wheelhead  for face grinding the structure is composed of a carriage, where the face grinding device is located.    the positioning is obtained by an hydraulic cylinder.   the diamond dressing device is assembled on the face grinding device casing.   manual feed handwheels  electronic type, with double selection of the increments division 0.1 - 0.01 and 0.001 mm.  for wheelhead and table movements.     diamond dresser  the internal diamond dressing device is very strong and is positioned on the table.     it starts  hydraulically, when the dressing operation is selected, by the operator.     the dressing operation may be carried out manually or in automatic cycle.    equipment and electrical plant  in a cooled cabinet, separate from the machine.      hydraulic plant   the hydraulic power pack, is separate from the machine and activates the hydraulic diamond dresser and face grinding device.       lubrication plant the lubrication power pack, is separate from the machine and supplies continuous oil to the wheelhead guides.   the recovered oil is filtered and then resent to the power pack.     the re-circulating ball screw nut for the working feed, is grease lubricated.           coolant plant  large capacity tank for the coolant water, complete with electric equipment.       equipped with coolant magnet cleaner  and coolant paper roll cleaner.       protections  for the protection of the operator all movable parts are covered with suitable guards.     precisely: protection casing for belts, protection casing for grinding wheel and bellows for guides.   the machine is completely closed and the front protection is a sheet sliding doors with poly-carbonate shields.   a safety device, does not permit the automatic cycle to start if the front sliding doors are open.   INTERNAL DIAMETER:300 MM
GRINDING DEPTH: MM
SWING DIAMETER:300/350 MM
WORKPIECE LENGTH - MAX.:2300 MM
TABLE ROTATING:-2/+6 °
TABLE SPEEDS:0-4000 MM/MIN
MAX. WORKPIECE WEIGHT:400 (FLIEGEND, 150MM VON DER SPINDELNASE) KG
WORKHEAD - CENTER TAPER:6 MK
ROTATION SPEED OF WORKHEAD :0 - 400 1/MIN
WORKHEAD MOTOR:4 KW
3-JAW CHUCK:250 (SELBSTSCHLIEßEND) MM
GRINDING MOTOR:11 KW
COOLANT PUMP:2,2 KW
CNC CONTROLLER:SIEMENS 840 D ODER SPS VON SIEMENS
SERVO MOTORS:
AUTOM. SENSING DEVICE FOR GRINDING WHEEL:OPTION
:
LINEAR SCALES AND BALLSCREW:IN ALLEN ACHSEN
GRINDING WHEEL DRESSER:
:
FULLY ENCLOSED:
:
TECHNICAL DOCUMENTATION IN GERMAN LANGUAGE:
CE-DESIGN:
SIGNAL LAMP:
FACE GRINDING ATTACHEMENT:DURCHMESSER 125 MM
CLAMPING CHUCK:350 (SELBST ZENTRIEREND) MM
:
MAGNETIC AND PAPER FILTER :
LEVELLIG ELEMENTS:
FREQUENCY CONTROL MAIN SPINDEL ENGINE:FüR DIE INNENSCHLEIFEINRICHTUNG
INTERNAL GRINDING SPINDLE:AUF ANFRAGE
INTERNAL GRINDING SPINDLE:AUF ANFRAGE
FIXED STEADY RESTS:10-100 MM, 100-170 MM

PERFORMANCE AND PRECISION DEGREE ROBBI GRINDING MACHINES ARE ACCORDING TO THE INTERNATIONAL PRECISION NORMES ISO 2433. THE TABLE MOVEMENT LINEARITY IS GUARANTEED BY A MAX. DEVIATION OF 0,002 MM/MT. THE OBTAINABLE GRINDING ROUNDNESS IS : 0,4M (**) (**) FOR A TEST WORKPIECE GROUND IN OUR FACTORY DURING MACHINE TESTING THE CNC CONTROLS : WHEEL HEAD MOVEMENT (AXIS X) LONGITUDINAL TABLE MOVEMENT (AXIS Z) WORK HEAD SPINDLE ROTATION SPEED THE AVAILABLE PROGRAMS PERMIT THE PROGRAMMING OF THE FOLLOWING GRINDING CYCLES PLUNGE CYLINDRICAL PASS CYLINDRICAL PASS WITH INTERPOLATION BETWEEN TABLE AND WHEEL MOVEMENT TO GRIND TAPER WORKPIECES RADIUS THE SOFTWARE FOR THE WORKPIECE GRINDING OPERATION IS VERY SIMPLE AND INTUITIVE. TO FACILITATE THE PROGRAMMING THE SOFTWARE IS EQUIPPED WITH AN EXEMPLIFYING GRAPHICS, TO INPUT THE DATA FOR EACH PARAMETER. THE SOFTWARE, HAS BEEN SPECIALLY STUDIED, SO AS TO PERMIT ALSO NON SPECIALISED OPERATORS TO PROGRAMME WITHOUT ANY PROBLEMS COMPLEX WORKPIECES. WHEN THE WORKPIECE GRINDING PROGRAMME HAS BEEN COMPLETED THE CNC WILL AUTOMATICALLY MAKE UP A SUMMARY LIST, WHERE ONLY THE GEOMETRIC PARAMETERS ARE EVIDENCED. THIS LIST PERMITS WITH A GLANCE TO VERIFY THE COMPLETE PROGRAMME; THIS OPERATION IS VERY HELPFUL TO VERIFY EVENTUAL INPUT DATA ERRORS OR TO CHECK RAPIDLY A WORKPIECE PROGRAMME WHEN RELOADED FROM THE FILE. WHILE THE PROGRAMME IS IN EXECUTION, IT IS POSSIBLE TO INTERVENE AND MODIFY IN REAL TIME THE TECHNOLOGIC PARAMETERS, SUCH AS: INCREMENTS, DWELL INVERSION TIMES, SPARKOUT PASSES. ALSO, IT IS POSSIBLE TO INTERVENE WITH THE JOG HANDWHEEL. THE GRINDING MACHINE IS COMPOSED OF : BASE STRUCTURE IN NORMALISED AND STABILISED CAST IRON WITH LARGE GROUND GUIDES. THE LUBRICATION PLANT SUPPLIES A CONSTANT OIL FLOW DISTRIBUTED OVER THE COMPLETE LENGTH OF THE GUIDES. IN THE MIDDLE OF THE BASE, THERE IS POSITIONED THE BALL SCREW FOR THE TABLE LONGITUDINAL MOVEMENT. ON ALL THE LOWER PART OF THE PERIMETER ARE SITUATED THE RECESSES FOR MACHINE LEVELLING. CONSIDERING THE BASE STRUCTURE, USUALLY A FOUNDATION IS NOT REQUIRED. TABLE THE TABLE IS MANUFACTURED IN TWO PARTS, BOTH ARE IN NORMALISED AND STABILISED CAST IRON. THE LOWER PART IS COMPOSED OF WIDE GUIDES WHICH ARE GROUND AND ACCURATELY HAND SCRAPPED, FOR A BETTER SLIDING. THE UPPER PART, IS SWIVELABLE IN THE TWO DIRECTIONS, SUITABLE FOR GRINDING TAPERED WORKPIECES. IT INCLUDES A MICROMETRIC DEVICE WITH CENTESIMAL DIAL GAUGE FOR TAPER CONTROL. WORKHEAD THE STRUCTURE IN NORMALISED, STABILISED AND WELL RIBBED CAST IRON, ALLOWS TO SUPPORT THE WORKPIECE WEIGHT AND THE FORCE GENERATED BY THE GRINDING OPERATION. THE SPINDLE ROTATES ON HIGH PRECISION BALL BEARINGS, GUARANTEEING RESTRICTED TOLERANCE AND MAXIMUM RIGIDITY IN THE WORKING. THE SPINDLE ROTATION IS BY MEANS OF A THREE PHASE MOTOR WITH VARIABLE SPEED CONTROLLED BY AN INVERTER. INTERNAL GRINDING SPINDLE CARRIAGE THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE INTERNAL GRINDING SPINDLE IS LOCATED. THE WORKING FEED, IS OBTAINED BY A RE-CIRCULATING BALL SCREW AND PRELOADED NUT. THE SCREW MOVEMENT IS ASSURED BY A BRUSHLESS MOTOR. THE INCREMENTAL OPTIC RULE GUARANTEES A WHEELHEAD POSITIONING PRECISION OF 0,001 MM. INTERNAL GRINDING SPINDLE AS THERE ARE MANY AND VARIOUS TYPES OF INTERNAL GRINDING SPINDLES, ACCORDING TO THE DIAMETERS AND LENGTHS THAT NEED TO BE GROUND, THE MACHINE IS SUPPLIED WITHOUT AN INTERNAL GRINDING SPINDLE, SO THAT THE CUSTOMER MAY SELECT WHICH TYPE IS MORE SUITABLE FOR HIS JOB. THE MACHINE IS MANUFACTURED STANDARD WITH A BELT TRANSMISSION SUITABLE FOR DIAM. MM. 60, DIAM. MM. 80 AND DIAM. MM. 100 INTERNAL GRINDING SPINDLES. ON REQUEST, HIGH FREQUENCY SPINDLES MAY BE ASSEMBLED. WHEELHEAD FOR FACE GRINDING THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE FACE GRINDING DEVICE IS LOCATED. THE POSITIONING IS OBTAINED BY AN HYDRAULIC CYLINDER. THE DIAMOND DRESSING DEVICE IS ASSEMBLED ON THE FACE GRINDING DEVICE CASING. MANUAL FEED HANDWHEELS ELECTRONIC TYPE, WITH DOUBLE SELECTION OF THE INCREMENTS DIVISION 0.1 - 0.01 AND 0.001 MM. FOR WHEELHEAD AND TABLE MOVEMENTS. DIAMOND DRESSER THE INTERNAL DIAMOND DRESSING DEVICE IS VERY STRONG AND IS POSITIONED ON THE TABLE. IT STARTS HYDRAULICALLY, WHEN THE DRESSING OPERATION IS SELECTED, BY THE OPERATOR. THE DRESSING OPERATION MAY BE CARRIED OUT MANUALLY OR IN AUTOMATIC CYCLE. EQUIPMENT AND ELECTRICAL PLANT IN A COOLED CABINET, SEPARATE FROM THE MACHINE. HYDRAULIC PLANT THE HYDRAULIC POWER PACK, IS SEPARATE FROM THE MACHINE AND ACTIVATES THE HYDRAULIC DIAMOND DRESSER AND FACE GRINDING DEVICE. LUBRICATION PLANT THE LUBRICATION POWER PACK, IS SEPARATE FROM THE MACHINE AND SUPPLIES CONTINUOUS OIL TO THE WHEELHEAD GUIDES. THE RECOVERED OIL IS FILTERED AND THEN RESENT TO THE POWER PACK. THE RE-CIRCULATING BALL SCREW NUT FOR THE WORKING FEED, IS GREASE LUBRICATED. COOLANT PLANT LARGE CAPACITY TANK FOR THE COOLANT WATER, COMPLETE WITH ELECTRIC EQUIPMENT. EQUIPPED WITH COOLANT MAGNET CLEANER AND COOLANT PAPER ROLL CLEANER. PROTECTIONS FOR THE PROTECTION OF THE OPERATOR ALL MOVABLE PARTS ARE COVERED WITH SUITABLE GUARDS. PRECISELY: PROTECTION CASING FOR BELTS, PROTECTION CASING FOR GRINDING WHEEL AND BELLOWS FOR GUIDES. THE MACHINE IS COMPLETELY CLOSED AND THE FRONT PROTECTION IS A SHEET SLIDING DOORS WITH POLY-CARBONATE SHIELDS. A SAFETY DEVICE, DOES NOT PERMIT THE AUTOMATIC CYCLE TO START IF THE FRONT SLIDING DOORS ARE OPEN.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-fully automatic package-press fromm pm150000 to strapping unit mh 600 + reserve unit complete package
ngapf
year: 11/2006; code: 48.150000.012
â· good facility overall condition: used, superficial signs of corrosion on the substructure due to impregnation of sawn timber (moist packages) but fully functional, no excessive wear
â· maximum dimensions: wxh = 1300 x 1300 mm
â· min. dimensions: wxh = approx. 800 x 450 mm
â?¢ band setting: 19x1mm
band frames to the fast strapping of low packages â·
2. tape dispenser of kb4 for standard roll with 1000 m pet band (19x1mm) & core diameter 406 mm
hydraulic unit with oil cooler â· including all valves
2. newly serviced to maturation aggregates mh 600 (1 plant, 1 x replacement head)
â· compl. electr. steuerungshw &amp; control program s7 d. company maresch incl.
all technical documentation (folders, digital version) & declaration of conformity including
â· spare parts kit (most common wear parts, band flaps, ...usw) including FULLY AUTOMATIC PACKAGE-PRESS FROMM PM150000 TO STRAPPING UNIT MH 600 + RESERVE UNIT COMPLETE PACKAGE NGAPF YEAR: 11/2006; CODE: 48.150000.012 &ACIRC;&MIDDOT; GOOD FACILITY OVERALL CONDITION: USED, SUPERFICIAL SIGNS OF CORROSION ON THE SUBSTRUCTURE DUE TO IMPREGNATION OF SAWN TIMBER (MOIST PACKAGES) BUT FULLY FUNCTIONAL, NO EXCESSIVE WEAR &ACIRC;&MIDDOT; MAXIMUM DIMENSIONS: WXH = 1300 X 1300 MM &ACIRC;&MIDDOT; MIN. DIMENSIONS: WXH = APPROX. 800 X 450 MM &ACIRC;?&CENT; BAND SETTING: 19X1MM BAND FRAMES TO THE FAST STRAPPING OF LOW PACKAGES &ACIRC;&MIDDOT; 2. TAPE DISPENSER OF KB4 FOR STANDARD ROLL WITH 1000 M PET BAND (19X1MM) & CORE DIAMETER 406 MM HYDRAULIC UNIT WITH OIL COOLER &ACIRC;&MIDDOT; INCLUDING ALL VALVES 2. NEWLY SERVICED TO MATURATION AGGREGATES MH 600 (1 PLANT, 1 X REPLACEMENT HEAD) &ACIRC;&MIDDOT; COMPL. ELECTR. STEUERUNGSHW &AMP; CONTROL PROGRAM S7 D. COMPANY MARESCH INCL. ALL TECHNICAL DOCUMENTATION (FOLDERS, DIGITAL VERSION) & DECLARATION OF CONFORMITY INCLUDING &ACIRC;&MIDDOT; SPARE PARTS KIT (MOST COMMON WEAR PARTS, BAND FLAPS, ...USW) INCLUDING
Vendedor: Heindl Handels GmbH
Año de construcción: usado
Ubicación: Land-internal diameter:250 mm<br/>grinding depth: mm<br/>swing diameter:455 mm<br/>workpiece length - max.:1200 mm<br/>table rotating:-4/+8 °<br/>table speeds:0-4000 mm/min<br/>max. workpiece weight:80 kg<br/>workhead - center taper:5 mk<br/>rotation speed of workhead :0 - 400 1/min<br/>workhead motor:4 kw<br/>3-jaw chuck:250 (selbstschließend) mm<br/>grinding motor:4 kw<br/>coolant pump:2,2 kw<br/>weight approx.:2,4 t<br/>machine dimensions:3200 x 2100 mm<br/>cnc controller:siemens 840 d oder sps von siemens <br/>servo motors: <br/>autom. sensing device for grinding wheel:option <br/>: <br/>linear scales and ballscrew:in allen achsen <br/>grinding wheel dresser: <br/>: <br/>fully enclosed: <br/>: <br/>technical documentation in german language: <br/>ce-design: <br/>signal lamp: <br/>face grinding attachement:durchmesser 125 mm<br/>clamping chuck:250 (selbstschließend), 1 satz harte backen, 1 satz weiche backen, 1 satz innen mm<br/>: <br/>magnetic and paper filter : <br/>levellig elements: <br/>frequency control main spindel engine:für die innenschleifeinrichtung <br/>internal grinding spindle:rpm 28.000, diam. 60 mm. min. diam. cap. 25 mm. x bohrung 50 mm, max. diam. cap. 100 mm. x bohrung 115 mm . <br/>internal grinding spindle:rpm 10.000, diam. 100 mm, min. diam. cap. 50 mm x bohrung 100 mm, max.diam. cap. 250 mm xbohrung 220 mm <br/>fixed steady rests:10-100 mm, 100-170 mm <br/><br/> performance and precision degree   robbi grinding machines are according to the international precision normes iso 2433. the table movement linearity is guaranteed by a max. deviation of  0,002 mm/mt.  the obtainable grinding roundness is :  0,4m (**)  (**)  for a test workpiece ground in our factory during machine testing        the cnc controls :  wheel head movement  (axis x) longitudinal table movement  (axis z) work head spindle rotation speed    the available programs permit the programming of the following grinding cycles  plunge  cylindrical pass   cylindrical pass with interpolation between table and wheel movement to grind taper workpieces radius   the software for the workpiece grinding operation is very simple and intuitive.   to facilitate the programming the software is equipped with an exemplifying graphics, to input the data for each parameter.      the software, has been specially studied, so as to permit also non specialised operators to programme without any problems complex workpieces.   when the workpiece grinding programme has been completed the cnc will automatically make up a summary list, where only the geometric parameters are evidenced.     this list permits with a  glance to verify the complete programme;  this operation is very helpful to verify eventual input data errors or to check rapidly a workpiece programme when reloaded from the file.        while the programme is in execution, it is possible to intervene and modify in real time the technologic parameters, such as:  increments, dwell inversion times, sparkout passes.   also, it is possible to intervene with the jog handwheel.      the grinding machine is composed of :    base  structure in normalised and stabilised cast iron with large ground guides.    the lubrication plant supplies a constant oil flow distributed over the complete length of the guides.    in the middle of the base, there is positioned the ball screw  for the table longitudinal movement.    on all the lower part of the perimeter are situated the recesses for machine levelling.  considering the base structure, usually a foundation is not required.    table   the table is manufactured in two parts, both are in normalised and stabilised cast iron.     the lower  part is composed of wide guides which are ground and accurately hand scrapped, for a better sliding.       the upper part, is swivelable in the two directions, suitable for grinding tapered workpieces.    it includes  a micrometric device with centesimal dial gauge for taper control.       workhead  the structure in normalised, stabilised and well ribbed cast iron, allows to support the workpiece weight and the force generated by the grinding operation.      the spindle rotates on high precision ball bearings, guaranteeing restricted tolerance and maximum rigidity in the working.      the spindle rotation is by means of a three phase motor with variable speed controlled by an inverter.  internal grinding spindle carriage  the structure is composed of a carriage, where the internal grinding spindle is located.    the working feed, is obtained by a re-circulating ball screw and preloaded nut.    the screw movement is assured by a brushless motor.       the incremental optic rule guarantees a wheelhead positioning precision of 0,001 mm.   internal grinding spindle  as there are many and various types of internal grinding spindles, according to the diameters and lengths that need to be ground, the machine is supplied without an internal grinding spindle, so that the customer may select which type is more suitable for his job.      the machine is manufactured standard with a belt transmission suitable for diam. mm. 60, diam. mm. 80 and diam. mm. 100 internal grinding spindles.      on request,  high frequency spindles may be assembled.   wheelhead  for face grinding the structure is composed of a carriage, where the face grinding device is located.    the positioning is obtained by an hydraulic cylinder.   the diamond dressing device is assembled on the face grinding device casing.   manual feed handwheels  electronic type, with double selection of the increments division 0.1 - 0.01 and 0.001 mm.  for wheelhead and table movements.     diamond dresser  the internal diamond dressing device is very strong and is positioned on the table.     it starts  hydraulically, when the dressing operation is selected, by the operator.     the dressing operation may be carried out manually or in automatic cycle.    equipment and electrical plant  in a cooled cabinet, separate from the machine.      hydraulic plant   the hydraulic power pack, is separate from the machine and activates the hydraulic diamond dresser and face grinding device.       lubrication plant the lubrication power pack, is separate from the machine and supplies continuous oil to the wheelhead guides.   the recovered oil is filtered and then resent to the power pack.     the re-circulating ball screw nut for the working feed, is grease lubricated.           coolant plant  large capacity tank for the coolant water, complete with electric equipment.       equipped with coolant magnet cleaner  and coolant paper roll cleaner.       protections  for the protection of the operator all movable parts are covered with suitable guards.     precisely: protection casing for belts, protection casing for grinding wheel and bellows for guides.   the machine is completely closed and the front protection is a sheet sliding doors with poly-carbonate shields.   a safety device, does not permit the automatic cycle to start if the front sliding doors are open.   INTERNAL DIAMETER:250 MM
GRINDING DEPTH: MM
SWING DIAMETER:455 MM
WORKPIECE LENGTH - MAX.:1200 MM
TABLE ROTATING:-4/+8 °
TABLE SPEEDS:0-4000 MM/MIN
MAX. WORKPIECE WEIGHT:80 KG
WORKHEAD - CENTER TAPER:5 MK
ROTATION SPEED OF WORKHEAD :0 - 400 1/MIN
WORKHEAD MOTOR:4 KW
3-JAW CHUCK:250 (SELBSTSCHLIEßEND) MM
GRINDING MOTOR:4 KW
COOLANT PUMP:2,2 KW
WEIGHT APPROX.:2,4 T
MACHINE DIMENSIONS:3200 X 2100 MM
CNC CONTROLLER:SIEMENS 840 D ODER SPS VON SIEMENS
SERVO MOTORS:
AUTOM. SENSING DEVICE FOR GRINDING WHEEL:OPTION
:
LINEAR SCALES AND BALLSCREW:IN ALLEN ACHSEN
GRINDING WHEEL DRESSER:
:
FULLY ENCLOSED:
:
TECHNICAL DOCUMENTATION IN GERMAN LANGUAGE:
CE-DESIGN:
SIGNAL LAMP:
FACE GRINDING ATTACHEMENT:DURCHMESSER 125 MM
CLAMPING CHUCK:250 (SELBSTSCHLIEßEND), 1 SATZ HARTE BACKEN, 1 SATZ WEICHE BACKEN, 1 SATZ INNEN MM
:
MAGNETIC AND PAPER FILTER :
LEVELLIG ELEMENTS:
FREQUENCY CONTROL MAIN SPINDEL ENGINE:FüR DIE INNENSCHLEIFEINRICHTUNG
INTERNAL GRINDING SPINDLE:RPM 28.000, DIAM. 60 MM. MIN. DIAM. CAP. 25 MM. X BOHRUNG 50 MM, MAX. DIAM. CAP. 100 MM. X BOHRUNG 115 MM .
INTERNAL GRINDING SPINDLE:RPM 10.000, DIAM. 100 MM, MIN. DIAM. CAP. 50 MM X BOHRUNG 100 MM, MAX.DIAM. CAP. 250 MM XBOHRUNG 220 MM
FIXED STEADY RESTS:10-100 MM, 100-170 MM

PERFORMANCE AND PRECISION DEGREE ROBBI GRINDING MACHINES ARE ACCORDING TO THE INTERNATIONAL PRECISION NORMES ISO 2433. THE TABLE MOVEMENT LINEARITY IS GUARANTEED BY A MAX. DEVIATION OF 0,002 MM/MT. THE OBTAINABLE GRINDING ROUNDNESS IS : 0,4M (**) (**) FOR A TEST WORKPIECE GROUND IN OUR FACTORY DURING MACHINE TESTING THE CNC CONTROLS : WHEEL HEAD MOVEMENT (AXIS X) LONGITUDINAL TABLE MOVEMENT (AXIS Z) WORK HEAD SPINDLE ROTATION SPEED THE AVAILABLE PROGRAMS PERMIT THE PROGRAMMING OF THE FOLLOWING GRINDING CYCLES PLUNGE CYLINDRICAL PASS CYLINDRICAL PASS WITH INTERPOLATION BETWEEN TABLE AND WHEEL MOVEMENT TO GRIND TAPER WORKPIECES RADIUS THE SOFTWARE FOR THE WORKPIECE GRINDING OPERATION IS VERY SIMPLE AND INTUITIVE. TO FACILITATE THE PROGRAMMING THE SOFTWARE IS EQUIPPED WITH AN EXEMPLIFYING GRAPHICS, TO INPUT THE DATA FOR EACH PARAMETER. THE SOFTWARE, HAS BEEN SPECIALLY STUDIED, SO AS TO PERMIT ALSO NON SPECIALISED OPERATORS TO PROGRAMME WITHOUT ANY PROBLEMS COMPLEX WORKPIECES. WHEN THE WORKPIECE GRINDING PROGRAMME HAS BEEN COMPLETED THE CNC WILL AUTOMATICALLY MAKE UP A SUMMARY LIST, WHERE ONLY THE GEOMETRIC PARAMETERS ARE EVIDENCED. THIS LIST PERMITS WITH A GLANCE TO VERIFY THE COMPLETE PROGRAMME; THIS OPERATION IS VERY HELPFUL TO VERIFY EVENTUAL INPUT DATA ERRORS OR TO CHECK RAPIDLY A WORKPIECE PROGRAMME WHEN RELOADED FROM THE FILE. WHILE THE PROGRAMME IS IN EXECUTION, IT IS POSSIBLE TO INTERVENE AND MODIFY IN REAL TIME THE TECHNOLOGIC PARAMETERS, SUCH AS: INCREMENTS, DWELL INVERSION TIMES, SPARKOUT PASSES. ALSO, IT IS POSSIBLE TO INTERVENE WITH THE JOG HANDWHEEL. THE GRINDING MACHINE IS COMPOSED OF : BASE STRUCTURE IN NORMALISED AND STABILISED CAST IRON WITH LARGE GROUND GUIDES. THE LUBRICATION PLANT SUPPLIES A CONSTANT OIL FLOW DISTRIBUTED OVER THE COMPLETE LENGTH OF THE GUIDES. IN THE MIDDLE OF THE BASE, THERE IS POSITIONED THE BALL SCREW FOR THE TABLE LONGITUDINAL MOVEMENT. ON ALL THE LOWER PART OF THE PERIMETER ARE SITUATED THE RECESSES FOR MACHINE LEVELLING. CONSIDERING THE BASE STRUCTURE, USUALLY A FOUNDATION IS NOT REQUIRED. TABLE THE TABLE IS MANUFACTURED IN TWO PARTS, BOTH ARE IN NORMALISED AND STABILISED CAST IRON. THE LOWER PART IS COMPOSED OF WIDE GUIDES WHICH ARE GROUND AND ACCURATELY HAND SCRAPPED, FOR A BETTER SLIDING. THE UPPER PART, IS SWIVELABLE IN THE TWO DIRECTIONS, SUITABLE FOR GRINDING TAPERED WORKPIECES. IT INCLUDES A MICROMETRIC DEVICE WITH CENTESIMAL DIAL GAUGE FOR TAPER CONTROL. WORKHEAD THE STRUCTURE IN NORMALISED, STABILISED AND WELL RIBBED CAST IRON, ALLOWS TO SUPPORT THE WORKPIECE WEIGHT AND THE FORCE GENERATED BY THE GRINDING OPERATION. THE SPINDLE ROTATES ON HIGH PRECISION BALL BEARINGS, GUARANTEEING RESTRICTED TOLERANCE AND MAXIMUM RIGIDITY IN THE WORKING. THE SPINDLE ROTATION IS BY MEANS OF A THREE PHASE MOTOR WITH VARIABLE SPEED CONTROLLED BY AN INVERTER. INTERNAL GRINDING SPINDLE CARRIAGE THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE INTERNAL GRINDING SPINDLE IS LOCATED. THE WORKING FEED, IS OBTAINED BY A RE-CIRCULATING BALL SCREW AND PRELOADED NUT. THE SCREW MOVEMENT IS ASSURED BY A BRUSHLESS MOTOR. THE INCREMENTAL OPTIC RULE GUARANTEES A WHEELHEAD POSITIONING PRECISION OF 0,001 MM. INTERNAL GRINDING SPINDLE AS THERE ARE MANY AND VARIOUS TYPES OF INTERNAL GRINDING SPINDLES, ACCORDING TO THE DIAMETERS AND LENGTHS THAT NEED TO BE GROUND, THE MACHINE IS SUPPLIED WITHOUT AN INTERNAL GRINDING SPINDLE, SO THAT THE CUSTOMER MAY SELECT WHICH TYPE IS MORE SUITABLE FOR HIS JOB. THE MACHINE IS MANUFACTURED STANDARD WITH A BELT TRANSMISSION SUITABLE FOR DIAM. MM. 60, DIAM. MM. 80 AND DIAM. MM. 100 INTERNAL GRINDING SPINDLES. ON REQUEST, HIGH FREQUENCY SPINDLES MAY BE ASSEMBLED. WHEELHEAD FOR FACE GRINDING THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE FACE GRINDING DEVICE IS LOCATED. THE POSITIONING IS OBTAINED BY AN HYDRAULIC CYLINDER. THE DIAMOND DRESSING DEVICE IS ASSEMBLED ON THE FACE GRINDING DEVICE CASING. MANUAL FEED HANDWHEELS ELECTRONIC TYPE, WITH DOUBLE SELECTION OF THE INCREMENTS DIVISION 0.1 - 0.01 AND 0.001 MM. FOR WHEELHEAD AND TABLE MOVEMENTS. DIAMOND DRESSER THE INTERNAL DIAMOND DRESSING DEVICE IS VERY STRONG AND IS POSITIONED ON THE TABLE. IT STARTS HYDRAULICALLY, WHEN THE DRESSING OPERATION IS SELECTED, BY THE OPERATOR. THE DRESSING OPERATION MAY BE CARRIED OUT MANUALLY OR IN AUTOMATIC CYCLE. EQUIPMENT AND ELECTRICAL PLANT IN A COOLED CABINET, SEPARATE FROM THE MACHINE. HYDRAULIC PLANT THE HYDRAULIC POWER PACK, IS SEPARATE FROM THE MACHINE AND ACTIVATES THE HYDRAULIC DIAMOND DRESSER AND FACE GRINDING DEVICE. LUBRICATION PLANT THE LUBRICATION POWER PACK, IS SEPARATE FROM THE MACHINE AND SUPPLIES CONTINUOUS OIL TO THE WHEELHEAD GUIDES. THE RECOVERED OIL IS FILTERED AND THEN RESENT TO THE POWER PACK. THE RE-CIRCULATING BALL SCREW NUT FOR THE WORKING FEED, IS GREASE LUBRICATED. COOLANT PLANT LARGE CAPACITY TANK FOR THE COOLANT WATER, COMPLETE WITH ELECTRIC EQUIPMENT. EQUIPPED WITH COOLANT MAGNET CLEANER AND COOLANT PAPER ROLL CLEANER. PROTECTIONS FOR THE PROTECTION OF THE OPERATOR ALL MOVABLE PARTS ARE COVERED WITH SUITABLE GUARDS. PRECISELY: PROTECTION CASING FOR BELTS, PROTECTION CASING FOR GRINDING WHEEL AND BELLOWS FOR GUIDES. THE MACHINE IS COMPLETELY CLOSED AND THE FRONT PROTECTION IS A SHEET SLIDING DOORS WITH POLY-CARBONATE SHIELDS. A SAFETY DEVICE, DOES NOT PERMIT THE AUTOMATIC CYCLE TO START IF THE FRONT SLIDING DOORS ARE OPEN.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-yamato weighing and packing line, complete line
this line is currently being set-up in our warehouse. will be finished and ready for production second/ third week of september.

complete from a to z weighing and packing line. always very well maintained, serviced till mid-august 2018.
professionaly taken out of production, now in stock and ready for re-sell.
machinery
1) totebin lift. 200l. tote bins fit in this lift to take the product up and empty automatically on the vibrating gutter.
2) vibrating gutter to receive the product from the tote-bin lift. this will vibrate the product nicely to the yamato for a constant flow of product.
3) yamato sigma f1 714 weigher 14 head multihead weigher. (more information below)
equipped with dimple-plated stainless steel that makes this machine suitable for all kinds of product.
highly popular machine. parts and service are available.
4a) sandiacre vertical bagging machine with new couple year old control panel. with gas-flush installed.
4b) innotech revo 3800 vertical bagging machine. (more information below), photo’s and video’s can be found here.

5) optional: lock insight (2014) metal detector designed to be in lines like this for vertical bagging machines.
more information can be found here. 
6) optional: lazy susan rotating table. more information.

support
5) complete stainless steel platform, very large for space to walk on. also a wall to hang the buckets and clean everything off without having to bring everything down. constructed fully from stainless steel. teardrop platform to walk on, to prevent from slipping.
6) stairs to reach higher to the vibrating gutter. this to check the production and clean the highest parts of the line.
7) strong stainless steel cone to attach the vibrating gutter. this to prevent the shaking from the gutter will affect the weighing accuracy of the yamato.
it’s a very well maintained weighing and packing line that has been serviced to the highest standards.
the whole line was in production till last week august the 19th.
than professional taken out of production, and now in our warehouse where we’ll assemble it again to showcase it to potential customers.

we can offer the machinery as well as transport and installation.
we supply you with a complete solution.

yamato multihead weigher sigma adw 714swh
large 14 headed yamato multihead weigher from the sigma series. this machine is still being build today.
constructed completely out of stainless steel this machine has an ip65 rating and therefore suitable for moist products in moist production rooms. this particular model is a good working machine ideal for all kinds of products. because it has vibrating gutters and a vibrating central plate this machine can also process many kinds of moist sticky products.
the buckets are very large and capable of processing products with a length up to 180mm.
general specifications:
weighing heads: 14
weight range: up to 3.000g ( single drop )
weighing heads volume: 5.000cc
max. product length: 180mm
max. speed: ~80 weighing per minute at 500g.

innotech vertical bagging lines
excellent pre-owned innotech vertical bagging machines.
both lines have a very similar set-up for same results.
these are revo 3800-s vffs machines capable of packing up to 80 bags per minute.
thanks to impulse sealing and a continuous packing-flow this machine reaches very high packing numbers in very little time. delivered with 1 tool for 30cm wide pouches, different sizes are possible with the purchase of a new mould. bag width can vary between 80-350mm. length of the bag can reach up to 550mm. YAMATO WEIGHING AND PACKING LINE, COMPLETE LINE THIS LINE IS CURRENTLY BEING SET-UP IN OUR WAREHOUSE. WILL BE FINISHED AND READY FOR PRODUCTION SECOND/ THIRD WEEK OF SEPTEMBER. COMPLETE FROM A TO Z WEIGHING AND PACKING LINE. ALWAYS VERY WELL MAINTAINED, SERVICED TILL MID-AUGUST 2018. PROFESSIONALY TAKEN OUT OF PRODUCTION, NOW IN STOCK AND READY FOR RE-SELL. MACHINERY 1) TOTEBIN LIFT. 200L. TOTE BINS FIT IN THIS LIFT TO TAKE THE PRODUCT UP AND EMPTY AUTOMATICALLY ON THE VIBRATING GUTTER. 2) VIBRATING GUTTER TO RECEIVE THE PRODUCT FROM THE TOTE-BIN LIFT. THIS WILL VIBRATE THE PRODUCT NICELY TO THE YAMATO FOR A CONSTANT FLOW OF PRODUCT. 3) YAMATO SIGMA F1 714 WEIGHER 14 HEAD MULTIHEAD WEIGHER. (MORE INFORMATION BELOW) EQUIPPED WITH DIMPLE-PLATED STAINLESS STEEL THAT MAKES THIS MACHINE SUITABLE FOR ALL KINDS OF PRODUCT. HIGHLY POPULAR MACHINE. PARTS AND SERVICE ARE AVAILABLE. 4A) SANDIACRE VERTICAL BAGGING MACHINE WITH NEW COUPLE YEAR OLD CONTROL PANEL. WITH GAS-FLUSH INSTALLED. 4B) INNOTECH REVO 3800 VERTICAL BAGGING MACHINE. (MORE INFORMATION BELOW), PHOTO’S AND VIDEO’S CAN BE FOUND HERE. 5) OPTIONAL: LOCK INSIGHT (2014) METAL DETECTOR DESIGNED TO BE IN LINES LIKE THIS FOR VERTICAL BAGGING MACHINES. MORE INFORMATION CAN BE FOUND HERE. 6) OPTIONAL: LAZY SUSAN ROTATING TABLE. MORE INFORMATION. SUPPORT 5) COMPLETE STAINLESS STEEL PLATFORM, VERY LARGE FOR SPACE TO WALK ON. ALSO A WALL TO HANG THE BUCKETS AND CLEAN EVERYTHING OFF WITHOUT HAVING TO BRING EVERYTHING DOWN. CONSTRUCTED FULLY FROM STAINLESS STEEL. TEARDROP PLATFORM TO WALK ON, TO PREVENT FROM SLIPPING. 6) STAIRS TO REACH HIGHER TO THE VIBRATING GUTTER. THIS TO CHECK THE PRODUCTION AND CLEAN THE HIGHEST PARTS OF THE LINE. 7) STRONG STAINLESS STEEL CONE TO ATTACH THE VIBRATING GUTTER. THIS TO PREVENT THE SHAKING FROM THE GUTTER WILL AFFECT THE WEIGHING ACCURACY OF THE YAMATO. IT’S A VERY WELL MAINTAINED WEIGHING AND PACKING LINE THAT HAS BEEN SERVICED TO THE HIGHEST STANDARDS. THE WHOLE LINE WAS IN PRODUCTION TILL LAST WEEK AUGUST THE 19TH. THAN PROFESSIONAL TAKEN OUT OF PRODUCTION, AND NOW IN OUR WAREHOUSE WHERE WE’LL ASSEMBLE IT AGAIN TO SHOWCASE IT TO POTENTIAL CUSTOMERS. WE CAN OFFER THE MACHINERY AS WELL AS TRANSPORT AND INSTALLATION. WE SUPPLY YOU WITH A COMPLETE SOLUTION. YAMATO MULTIHEAD WEIGHER SIGMA ADW 714SWH LARGE 14 HEADED YAMATO MULTIHEAD WEIGHER FROM THE SIGMA SERIES. THIS MACHINE IS STILL BEING BUILD TODAY. CONSTRUCTED COMPLETELY OUT OF STAINLESS STEEL THIS MACHINE HAS AN IP65 RATING AND THEREFORE SUITABLE FOR MOIST PRODUCTS IN MOIST PRODUCTION ROOMS. THIS PARTICULAR MODEL IS A GOOD WORKING MACHINE IDEAL FOR ALL KINDS OF PRODUCTS. BECAUSE IT HAS VIBRATING GUTTERS AND A VIBRATING CENTRAL PLATE THIS MACHINE CAN ALSO PROCESS MANY KINDS OF MOIST STICKY PRODUCTS. THE BUCKETS ARE VERY LARGE AND CAPABLE OF PROCESSING PRODUCTS WITH A LENGTH UP TO 180MM. GENERAL SPECIFICATIONS: WEIGHING HEADS: 14 WEIGHT RANGE: UP TO 3.000G ( SINGLE DROP ) WEIGHING HEADS VOLUME: 5.000CC MAX. PRODUCT LENGTH: 180MM MAX. SPEED: ~80 WEIGHING PER MINUTE AT 500G. INNOTECH VERTICAL BAGGING LINES EXCELLENT PRE-OWNED INNOTECH VERTICAL BAGGING MACHINES. BOTH LINES HAVE A VERY SIMILAR SET-UP FOR SAME RESULTS. THESE ARE REVO 3800-S VFFS MACHINES CAPABLE OF PACKING UP TO 80 BAGS PER MINUTE. THANKS TO IMPULSE SEALING AND A CONTINUOUS PACKING-FLOW THIS MACHINE REACHES VERY HIGH PACKING NUMBERS IN VERY LITTLE TIME. DELIVERED WITH 1 TOOL FOR 30CM WIDE POUCHES, DIFFERENT SIZES ARE POSSIBLE WITH THE PURCHASE OF A NEW MOULD. BAG WIDTH CAN VARY BETWEEN 80-350MM. LENGTH OF THE BAG CAN REACH UP TO 550MM.
Vendedor: Scotraco B.V.
Año de construcción: usado
Ubicación: Land-x-travel:1500 mm<br/>y-travel:1000 mm<br/>z-travel:950 (opt.1500) mm<br/>t-slot (width-distance-quantity):22h8x7 stk. mm<br/>table area:1600x1050 mm<br/>max. table load:3000 kg<br/>spindle taper:50 sk<br/>spindle speeds:3500 1/min.<br/>spindle motor:15/18,5 (22/26 opt) kw<br/>feed:1~8000 mm/min<br/>rapid speed:10 m/min<br/>positioning accuracy:jis 6338;±0,005mm / 300mm vdi 3441:p0,014mm <br/>repeating accuracy:jis 6338:±0,003mm  vdi3441:ps0,01 mm <br/>total power requirement:30 kva<br/>weight of the machine ca.:10 t<br/>dimensions of the machine ca.: m<br/>universal milling head:manuell <br/>linear scales in x-y-z axes:von heidenhain; mit ausblasvorrichtung von  <br/>chip conveyor:schneckenausführung vorne/hinten <br/>ce-design: <br/>cnc control:siemens/fanuc/heidenhain <br/>rs232 terminal interface port: <br/>tools: <br/>levellig elements: <br/>halogen lamp: <br/>alarming lamp: <br/>technical documentation: <br/>ce-certificate: <br/><br/>trade term : f.o.b. taiwan port  shipment : within 14 days after receipt of your down payment payment : 30% down payment by swift transfer, 70% by irrevocable & sight l/c in our favor packing : by seaworthy package warranty:  12 months validity : 60 days X-TRAVEL:1500 MM
Y-TRAVEL:1000 MM
Z-TRAVEL:950 (OPT.1500) MM
T-SLOT (WIDTH-DISTANCE-QUANTITY):22H8X7 STK. MM
TABLE AREA:1600X1050 MM
MAX. TABLE LOAD:3000 KG
SPINDLE TAPER:50 SK
SPINDLE SPEEDS:3500 1/MIN.
SPINDLE MOTOR:15/18,5 (22/26 OPT) KW
FEED:1~8000 MM/MIN
RAPID SPEED:10 M/MIN
POSITIONING ACCURACY:JIS 6338;±0,005MM / 300MM VDI 3441:P0,014MM
REPEATING ACCURACY:JIS 6338:±0,003MM VDI3441:PS0,01 MM
TOTAL POWER REQUIREMENT:30 KVA
WEIGHT OF THE MACHINE CA.:10 T
DIMENSIONS OF THE MACHINE CA.: M
UNIVERSAL MILLING HEAD:MANUELL
LINEAR SCALES IN X-Y-Z AXES:VON HEIDENHAIN; MIT AUSBLASVORRICHTUNG VON
CHIP CONVEYOR:SCHNECKENAUSFüHRUNG VORNE/HINTEN
CE-DESIGN:
CNC CONTROL:SIEMENS/FANUC/HEIDENHAIN
RS232 TERMINAL INTERFACE PORT:
TOOLS:
LEVELLIG ELEMENTS:
HALOGEN LAMP:
ALARMING LAMP:
TECHNICAL DOCUMENTATION:
CE-CERTIFICATE:

TRADE TERM : F.O.B. TAIWAN PORT SHIPMENT : WITHIN 14 DAYS AFTER RECEIPT OF YOUR DOWN PAYMENT PAYMENT : 30% DOWN PAYMENT BY SWIFT TRANSFER, 70% BY IRREVOCABLE & SIGHT L/C IN OUR FAVOR PACKING : BY SEAWORTHY PACKAGE WARRANTY: 12 MONTHS VALIDITY : 60 DAYS
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 1 €
Ubicación: Land-for sale we offer mannesmann sortec a crossbelt sorters nvl.

the system has been used, was dismantled correctly and securely packaged for transport. now waiting for a new owner.

our company offer you a full range of services. we design, deliver and assemble the equipment according to predetermined customer needs.

technical data:

year of construction: 2001,
233 vehicles with right-left discharge belt
560/620 mm
sorter oval running around
speed adjustable max 2.2 m/s

115 transmission belts, aa 360 mm, width 640 mm
115 workstations / lift stations with lifting device and mounted belt conveyors, aa 600 mm
belt width 640 mm (hub stations divided into module 1 and 2)
hub station compressed air operated and height adjustable including contour monitoring

if your interested, please contact me. we offer you a complete installation including control, integration with wms system, documentation and visualization.

price and technical parameters only on request.

email: info@regalux.com
fixed: 06996759267
mobile 015217002453

FOR SALE WE OFFER MANNESMANN SORTEC A CROSSBELT SORTERS NVL. THE SYSTEM HAS BEEN USED, WAS DISMANTLED CORRECTLY AND SECURELY PACKAGED FOR TRANSPORT. NOW WAITING FOR A NEW OWNER. OUR COMPANY OFFER YOU A FULL RANGE OF SERVICES. WE DESIGN, DELIVER AND ASSEMBLE THE EQUIPMENT ACCORDING TO PREDETERMINED CUSTOMER NEEDS. TECHNICAL DATA: YEAR OF CONSTRUCTION: 2001, 233 VEHICLES WITH RIGHT-LEFT DISCHARGE BELT 560/620 MM SORTER OVAL RUNNING AROUND SPEED ADJUSTABLE MAX 2.2 M/S 115 TRANSMISSION BELTS, AA 360 MM, WIDTH 640 MM 115 WORKSTATIONS / LIFT STATIONS WITH LIFTING DEVICE AND MOUNTED BELT CONVEYORS, AA 600 MM BELT WIDTH 640 MM (HUB STATIONS DIVIDED INTO MODULE 1 AND 2) HUB STATION COMPRESSED AIR OPERATED AND HEIGHT ADJUSTABLE INCLUDING CONTOUR MONITORING IF YOUR INTERESTED, PLEASE CONTACT ME. WE OFFER YOU A COMPLETE INSTALLATION INCLUDING CONTROL, INTEGRATION WITH WMS SYSTEM, DOCUMENTATION AND VISUALIZATION. PRICE AND TECHNICAL PARAMETERS ONLY ON REQUEST. EMAIL: INFO@REGALUX.COM FIXED: 06996759267 MOBILE 015217002453
Vendedor: Regalux GmbH
Año de construcción: usado
Ubicación: Land-x-travel:3000 mm<br/>y-travel:1000 mm<br/>z-travel:950 (opt.1500) mm<br/>t-slot (width-distance-quantity):22h8x7 stk. mm<br/>table area:3100x1050 mm<br/>max. table load:8000 kg<br/>spindle taper:50 sk<br/>spindle speeds:3500 (5000 opt.) 1/min.<br/>spindle motor:15/18,5 (22/26 opt) kw<br/>feed:1~8000 mm/min<br/>rapid speed:10 m/min<br/>positioning accuracy:jis 6338;±0,005mm / 300mm vdi 3441:p0,014mm <br/>repeating accuracy:jis 6338:±0,003mm  vdi3441:ps0,01 mm <br/>total power requirement:35 kva<br/>weight of the machine ca.:13,5 t<br/>dimensions of the machine ca.: m<br/>universal milling head:manuell <br/>linear scales in x-y-z axes:von heidenhain; mit ausblasvorrichtung von  <br/>chip conveyor:schneckenausführung vorne/hinten <br/>ce-design: <br/>cnc control:siemens/fanuc/heidenhain <br/>rs232 terminal interface port: <br/>tools: <br/>levellig elements: <br/>halogen lamp: <br/>alarming lamp: <br/>technical documentation: <br/>ce-certificate: <br/><br/>trade term : f.o.b. taiwan port  shipment : within 14 days after receipt of your down payment payment : 30% down payment by swift transfer, 70% by irrevocable & sight l/c in our favor packing : by seaworthy package warranty:  12 months validity : 60 days X-TRAVEL:3000 MM
Y-TRAVEL:1000 MM
Z-TRAVEL:950 (OPT.1500) MM
T-SLOT (WIDTH-DISTANCE-QUANTITY):22H8X7 STK. MM
TABLE AREA:3100X1050 MM
MAX. TABLE LOAD:8000 KG
SPINDLE TAPER:50 SK
SPINDLE SPEEDS:3500 (5000 OPT.) 1/MIN.
SPINDLE MOTOR:15/18,5 (22/26 OPT) KW
FEED:1~8000 MM/MIN
RAPID SPEED:10 M/MIN
POSITIONING ACCURACY:JIS 6338;±0,005MM / 300MM VDI 3441:P0,014MM
REPEATING ACCURACY:JIS 6338:±0,003MM VDI3441:PS0,01 MM
TOTAL POWER REQUIREMENT:35 KVA
WEIGHT OF THE MACHINE CA.:13,5 T
DIMENSIONS OF THE MACHINE CA.: M
UNIVERSAL MILLING HEAD:MANUELL
LINEAR SCALES IN X-Y-Z AXES:VON HEIDENHAIN; MIT AUSBLASVORRICHTUNG VON
CHIP CONVEYOR:SCHNECKENAUSFüHRUNG VORNE/HINTEN
CE-DESIGN:
CNC CONTROL:SIEMENS/FANUC/HEIDENHAIN
RS232 TERMINAL INTERFACE PORT:
TOOLS:
LEVELLIG ELEMENTS:
HALOGEN LAMP:
ALARMING LAMP:
TECHNICAL DOCUMENTATION:
CE-CERTIFICATE:

TRADE TERM : F.O.B. TAIWAN PORT SHIPMENT : WITHIN 14 DAYS AFTER RECEIPT OF YOUR DOWN PAYMENT PAYMENT : 30% DOWN PAYMENT BY SWIFT TRANSFER, 70% BY IRREVOCABLE & SIGHT L/C IN OUR FAVOR PACKING : BY SEAWORTHY PACKAGE WARRANTY: 12 MONTHS VALIDITY : 60 DAYS
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 1 €
Ubicación: Land-
for sale, we offer you an akl automated small part storages of ssi schã¤fer's.

our company offer you a full range of services. we design, deliver and assemble the equipment according to predetermined customer needs.

technical data and description:

combined miniload and pick-by-light system;
capacity for a total of about 50,000 pallets;
filling level cap. 50 kg and section cap. 920 kg;
shelf height approx. 13 m and length 48 m.
5 charge / discharge rail handling cranes type smc 2;
lid. 100 kilograms;
3 picking stations; with light; consisting of zone collection in continuous shelves depth 4 or 3 tanks;
3 commissioning course length 48 m.
10 order-picking stations;
7 flow wheel level 3 including conveyor and 4 without conveyor belt;
total packing centres 1622 surfaces and maximum cover. by 200-300

5 control cabinets; 2 remote controls
scanners of bar codes
5 x separate access door;
main control panel and various conveyor belts in the same hall total length 500 m;
total area approx. 56 x 30 m (1680 m2)

we offer a complete installation including control, integration with wms system, documentation and visualization.

if you have further questions, please contact me.
price, as well as more pictures upon request!

email: info@regalux.com
fixed: 06996759267
mobile: 015217002453 FOR SALE, WE OFFER YOU AN AKL AUTOMATED SMALL PART STORAGES OF SSI SCH&ATILDE;&CURREN;FER'S. OUR COMPANY OFFER YOU A FULL RANGE OF SERVICES. WE DESIGN, DELIVER AND ASSEMBLE THE EQUIPMENT ACCORDING TO PREDETERMINED CUSTOMER NEEDS. TECHNICAL DATA AND DESCRIPTION: COMBINED MINILOAD AND PICK-BY-LIGHT SYSTEM; CAPACITY FOR A TOTAL OF ABOUT 50,000 PALLETS; FILLING LEVEL CAP. 50 KG AND SECTION CAP. 920 KG; SHELF HEIGHT APPROX. 13 M AND LENGTH 48 M. 5 CHARGE / DISCHARGE RAIL HANDLING CRANES TYPE SMC 2; LID. 100 KILOGRAMS; 3 PICKING STATIONS; WITH LIGHT; CONSISTING OF ZONE COLLECTION IN CONTINUOUS SHELVES DEPTH 4 OR 3 TANKS; 3 COMMISSIONING COURSE LENGTH 48 M. 10 ORDER-PICKING STATIONS; 7 FLOW WHEEL LEVEL 3 INCLUDING CONVEYOR AND 4 WITHOUT CONVEYOR BELT; TOTAL PACKING CENTRES 1622 SURFACES AND MAXIMUM COVER. BY 200-300 5 CONTROL CABINETS; 2 REMOTE CONTROLS SCANNERS OF BAR CODES 5 X SEPARATE ACCESS DOOR; MAIN CONTROL PANEL AND VARIOUS CONVEYOR BELTS IN THE SAME HALL TOTAL LENGTH 500 M; TOTAL AREA APPROX. 56 X 30 M (1680 M2) WE OFFER A COMPLETE INSTALLATION INCLUDING CONTROL, INTEGRATION WITH WMS SYSTEM, DOCUMENTATION AND VISUALIZATION. IF YOU HAVE FURTHER QUESTIONS, PLEASE CONTACT ME. PRICE, AS WELL AS MORE PICTURES UPON REQUEST! EMAIL: INFO@REGALUX.COM FIXED: 06996759267 MOBILE: 015217002453
Vendedor: Regalux GmbH
Año de construcción: usado
Ubicación: Land-x-travel:4000 mm<br/>y-travel:1000 mm<br/>z-travel:950 (opt.1500) mm<br/>t-slot (width-distance-quantity):22h8x7 stk. mm<br/>table area:3600x1000 mm<br/>max. table load:9000 kg<br/>spindle taper:50 sk<br/>spindle speeds:3500 (5000 opt.) 1/min.<br/>spindle motor:15/18,5 (22/26 opt) kw<br/>feed:1~8000 mm/min<br/>rapid speed:10 m/min<br/>positioning accuracy:jis 6338;±0,005mm / 300mm vdi 3441:p0,014mm <br/>repeating accuracy:jis 6338:±0,003mm  vdi3441:ps0,01 mm <br/>total power requirement:40 kva<br/>weight of the machine ca.:23,6 t<br/>dimensions of the machine ca.: m<br/>universal milling head:manuell <br/>linear scales in x-y-z axes:von heidenhain; mit ausblasvorrichtung von  <br/>chip conveyor:schneckenausführung vorne/hinten <br/>ce-design: <br/>cnc control:siemens/fanuc/heidenhain <br/>rs232 terminal interface port: <br/>tools: <br/>levellig elements: <br/>halogen lamp: <br/>alarming lamp: <br/>technical documentation: <br/>ce-certificate: <br/><br/>trade term : f.o.b. taiwan port  shipment : within 14 days after receipt of your down payment payment : 30% down payment by swift transfer, 70% by irrevocable & sight l/c in our favor packing : by seaworthy package warranty:  12 months validity : 60 days X-TRAVEL:4000 MM
Y-TRAVEL:1000 MM
Z-TRAVEL:950 (OPT.1500) MM
T-SLOT (WIDTH-DISTANCE-QUANTITY):22H8X7 STK. MM
TABLE AREA:3600X1000 MM
MAX. TABLE LOAD:9000 KG
SPINDLE TAPER:50 SK
SPINDLE SPEEDS:3500 (5000 OPT.) 1/MIN.
SPINDLE MOTOR:15/18,5 (22/26 OPT) KW
FEED:1~8000 MM/MIN
RAPID SPEED:10 M/MIN
POSITIONING ACCURACY:JIS 6338;±0,005MM / 300MM VDI 3441:P0,014MM
REPEATING ACCURACY:JIS 6338:±0,003MM VDI3441:PS0,01 MM
TOTAL POWER REQUIREMENT:40 KVA
WEIGHT OF THE MACHINE CA.:23,6 T
DIMENSIONS OF THE MACHINE CA.: M
UNIVERSAL MILLING HEAD:MANUELL
LINEAR SCALES IN X-Y-Z AXES:VON HEIDENHAIN; MIT AUSBLASVORRICHTUNG VON
CHIP CONVEYOR:SCHNECKENAUSFüHRUNG VORNE/HINTEN
CE-DESIGN:
CNC CONTROL:SIEMENS/FANUC/HEIDENHAIN
RS232 TERMINAL INTERFACE PORT:
TOOLS:
LEVELLIG ELEMENTS:
HALOGEN LAMP:
ALARMING LAMP:
TECHNICAL DOCUMENTATION:
CE-CERTIFICATE:

TRADE TERM : F.O.B. TAIWAN PORT SHIPMENT : WITHIN 14 DAYS AFTER RECEIPT OF YOUR DOWN PAYMENT PAYMENT : 30% DOWN PAYMENT BY SWIFT TRANSFER, 70% BY IRREVOCABLE & SIGHT L/C IN OUR FAVOR PACKING : BY SEAWORTHY PACKAGE WARRANTY: 12 MONTHS VALIDITY : 60 DAYS
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 1 €
Ubicación: Land-
we offer a sorting plant optimus for sale. it's a distrisort.

the system has been used, was dismantled correctly and securely packaged for transport. now waiting for a new owner.

the sorter is intended for book sorting.

our company offer you a full range of services. we design, deliver and assemble the equipment according to predetermined customer needs.

technical data:

sort type: distrisort
sorter layout: carousel assorted product:
packages capacity: 5,400 trays per hour machine length: 20 m tray size: 600 x 600 mm objectives: 21
slide length: 1,000 mm sliding distance: 900 mm in-feed: automatic, top loading
sort type: postcode / route
features: automatic camera bar code reader

if your interested, please contact me. we offer you a complete installation including control, integration with wms system, documentation and visualization.

price and technical parameters on request.

email: info@regalux.com
fixed: 06996759267
mobile 015217002453 WE OFFER A SORTING PLANT OPTIMUS FOR SALE. IT'S A DISTRISORT. THE SYSTEM HAS BEEN USED, WAS DISMANTLED CORRECTLY AND SECURELY PACKAGED FOR TRANSPORT. NOW WAITING FOR A NEW OWNER. THE SORTER IS INTENDED FOR BOOK SORTING. OUR COMPANY OFFER YOU A FULL RANGE OF SERVICES. WE DESIGN, DELIVER AND ASSEMBLE THE EQUIPMENT ACCORDING TO PREDETERMINED CUSTOMER NEEDS. TECHNICAL DATA: SORT TYPE: DISTRISORT SORTER LAYOUT: CAROUSEL ASSORTED PRODUCT: PACKAGES CAPACITY: 5,400 TRAYS PER HOUR MACHINE LENGTH: 20 M TRAY SIZE: 600 X 600 MM OBJECTIVES: 21 SLIDE LENGTH: 1,000 MM SLIDING DISTANCE: 900 MM IN-FEED: AUTOMATIC, TOP LOADING SORT TYPE: POSTCODE / ROUTE FEATURES: AUTOMATIC CAMERA BAR CODE READER IF YOUR INTERESTED, PLEASE CONTACT ME. WE OFFER YOU A COMPLETE INSTALLATION INCLUDING CONTROL, INTEGRATION WITH WMS SYSTEM, DOCUMENTATION AND VISUALIZATION. PRICE AND TECHNICAL PARAMETERS ON REQUEST. EMAIL: INFO@REGALUX.COM FIXED: 06996759267 MOBILE 015217002453
Vendedor: Regalux GmbH
Año de construcción: usado
Ubicación: Land-drilling capacity diameter max.: 25 ( in steel st.60) mm<br/>drilling capacity diameter min.: 3 (4) mm<br/>bore depth: 1000 mm<br/>numbers of pallets: 2 <br/>size of pallet: 1000 x 800 mm<br/>control: siemens 840 d <br/>number of controlled axis: 5 <br/>travel -x axis: 2000 mm<br/>travel -y axis: 1000 mm<br/>travel -z axis: 1500 (1340) mm<br/>travel -w axis: 1000 mm<br/>b-axis (table): 360° deg<br/>workpiece dia.: max. 1700 (störkreis) mm<br/>spindle turning speed range: 1250/2950/6880/15000 u/min<br/>output: 7/16/7/2 (100 %) kw<br/>output: 8,4/19,2/8,4/2,4 (60 %) kw<br/>torque: 60/55/12/1,5 nm<br/>feed speed: 0 - 15000 (z) m/min.<br/>feed speeds: 100 - 10000 (x) mm/min<br/>feed speeds: 100 - 10000 (y) mm/min<br/>feed speeds: 100 - 10000 (w) mm/min<br/>table load: 5000 (nutzlast) dan<br/>total power requirement: 32 (100a) kw<br/>weight of the machine ca.: 16650 kg<br/>dimensions of the machine ca.: 7,8 x 6,15 x 3,26 m<br/>cnc deephole boring machine with pallet-changer<br/><br/>equipment:<br/>pallet changer with two pallets<br/>housing<br/>15 off boring bars<br/>machine documentation in german language<br/>coolant equipment<br/>chip (swarf) conveyor<br/><br/>machine in very good condition, now stored in our warehouse in düsseldorf (not<br/>under power).<br/><br/>equipment / accessories:<br/>pallet changer with two pallets<br/>housing<br/>15 off boring bars<br/>machine documentation in german language<br/>coolant equipment<br/>chip (swarf) conveyor<br/><br/>the previous owner ist he company multivac.<br/>multivac is the leader in horizontal thermoforming packaging solutions. <br/>with our thermoforming machines pack efficiently and economically a wide range <br/>of products such. <br/>as food, industrial and consumer products and medical and pharmaceutical <br/>products.<br/><br/>some more technical details:<br/>cnc deep hole drilling machine with pallet changer<br/><br/>technical specifications:<br/>scope of application<br/>deep drilling<br/>spindle number 1<br/>bore slide stroke 1500 mm, with 2 steadies 1340 mm<br/>drilling method single-fluted gun drill<br/>drilling depth max. 1000 mm with 2 steadies<br/>drilling (in steel st.60)<br/>min. diameter 4 mm (standard)<br/>min. diameter 3 mm (optional)<br/>max. diameter 25 mm<br/>with single-fluted gun drill<br/><br/>boring drive<br/>manufacturer fortuna, msl-rz 210 fl 15/7<br/>without spindle cooling, with lifetime grease filling, with ptc,<br/>with temperature sensor, with sealing air connection 0,8 bar<br/>speeds 1250/2950/6880/15000 rpm<br/>power 7/16/7/2 kw at 100%<br/>power 8.4 / 19.2 / 8.4 / 2.4 kw at 60%<br/>torque 60/55/12 / 1.5 nm<br/><br/>z-axis<br/>feed speeds 0-15000 mm / min.<br/>rapid traverse rate 15 m / min.<br/>engine power 20 nm at 2000 rpm<br/>integrated encoder type ern 1387<br/>feed force 1000 dan<br/>travel 1500 mm (1340 mm with 2 steadies)<br/><br/>x axis <br/>roller monorail rue 55<br/>feed speeds from 100 to 10000 mm / min.<br/>rapid traverse 15 m / min.<br/>engine power 27 nm at 2000 rpm<br/>integrated encoder type ag 612<br/>travel 2000 mm<br/><br/>y-axis<br/>roller monorail rue 55<br/>feed speeds from 100 to 10000 mm / min.<br/>rapid traverse 15 m / min.<br/>engine power 27 nm at 2000 rpm<br/>integrated encoder type ern 1387<br/>travel 1000 mm<br/><br/><br/>w-axis<br/>roller monorail rue 55<br/>feed speeds from 100 to 10000 mm / min.<br/>rapid traverse rate 15 m / min.<br/>engine power 27 nm at 2000 rpm<br/>integrated encoder type ag 612<br/>travel  1000 mm<br/><br/>worktable<br/>clamping size 1000 x 800 mm<br/>angle measurement directly display on the screen, 360 deg continuously <br/>rotatably.<br/>b-axis integrated rotary encoder type rod 426<br/>max. table load 5000 dan<br/>transport capacity 25000 nm<br/>t-slots along 7 piece<br/>aligning slots lengthwise and crosswise 1<br/>centering 1<br/><br/>nc table<br/>type pktf<br/>size 45<br/>engine power 27 nm<br/>speed 3000 rpm<br/>reduction 1: 180 + 1: 2<br/>clamping hydraulically<br/>clamping force 34 kn<br/>max. turning speed 10 1 / min.<br/>dividing accuracy +/- 6.75 <br/><br/>voltage<br/>operating voltage 400 v<br/>frequency 50 hz<br/>control voltage 230 v / 24 v<br/>total power 32 kw<br/>cross section 35 mm²<br/>fuse 100 a<br/>rated current 72 a<br/><br/>main dimensions<br/>length x width x height approx. 7800 x 6150 x 3260 mm<br/>transport weight 15 t<br/><br/>coolant system<br/>cooling lubricant emulsion<br/>km-1000 l container with level indicator<br/>submersible pump 100 ltr. at 5 bar<br/>submersible pump 20 ltr. at 0.52 bar<br/>high-pressure pump unit 56 l / min. at 80 bar, 75 l / min. at 70 bar<br/>?rollensieb? filter flow rate 100 l / min.<br/>submersible pump 100 ltr. at 0.5 bar<br/>chip conveying chips amount approximately 25 kg / h<br/><br/>description of the machine:<br/>the complete solution with high-frequency spindle and coolant system in<br/>machine bed is integrated for machining different workpieces suitable.<br/><br/>the drilling machine is equipped with a circular dividing table.<br/>the rotary indexing table is individually displaced.<br/><br/>the workpiece clamping, drill bushing and editing tools (possibly<br/>steady rest) are select the workpiece to be machined accordingly<br/><br/>(additional equipment).<br/>processing methods<br/>this boring machine is designed for deep drilling (single-fluted gun drill).<br/><br/>processing unit<br/>the spindle unit is mounted on a feed slide with linear rolling guides <br/>assembled. <br/>the feed drive is infinitely adjustable.<br/>the rapid traverse speed is determined by the nc program (parameters)<br/>and monitored.<br/><br/>the spindle speed is infinitely variable (frequency controlled) the<br/>performance data for the main and feed drives through the digital<br/>drive technology is available directly from the inverters.<br/><br/>the spindle bearing is a precision spindle bearing with lifetime grease <br/>lubrication.<br/><br/>sealing air against the penetration of the cooling lubricant.<br/><br/>workpiece clamping<br/>the nc rotary table has a clamping area of 1000 x 800 mm.<br/>the rotary indexing table is adjustable by electric motors. the position<br/>is detected by a rotary encoder and displayed in the control picture.<br/>the rotary indexing table is hydraulically clamped in the basic position.<br/>the surface of the circular table top section is as pallet clamping station<br/>educated.<br/><br/>the traveling column (x-axis) is mounted on linear roller guides.<br/>the feed drive is adjustable. the positioning of the traveling column<br/>via the the nc program.<br/><br/>steady rest<br/>the steady rest serves to support the drill pipe. the steady rest bush<br/>reduces the drill pipe and machining vibrations. the retreat is<br/>determined via a roller chain and set.<br/><br/>additional equipment<br/>the coolant system with high-pressure diaphragm piston pump, chip conveyor<br/>?rollensieb? filter, mud pump, submersible pump pumps the cleaned cooling<br/>lubricant for drilling.<br/><br/>cnc control consisting of a siemens sinumerik 840 d including<br/>plc s7-300, slimline operator panel (op31) with color display and operating and<br/>control panel with override function.<br/><br/>nc / plc<br/>the machine is equipped with an nc control for deep hole drilling machines and a<br/>memory programming controller (plc) equipped.<br/><br/>equipment:<br/>fully protective housing<br/>separate electric cabinet<br/>machine documentation in german language<br/>various drill spindles, 15 pcs.<br/><br/><br/><br/><br/><br/><br/> DRILLING CAPACITY DIAMETER MAX.: 25 ( IN STEEL ST.60) MM
DRILLING CAPACITY DIAMETER MIN.: 3 (4) MM
BORE DEPTH: 1000 MM
NUMBERS OF PALLETS: 2
SIZE OF PALLET: 1000 X 800 MM
CONTROL: SIEMENS 840 D
NUMBER OF CONTROLLED AXIS: 5
TRAVEL -X AXIS: 2000 MM
TRAVEL -Y AXIS: 1000 MM
TRAVEL -Z AXIS: 1500 (1340) MM
TRAVEL -W AXIS: 1000 MM
B-AXIS (TABLE): 360° DEG
WORKPIECE DIA.: MAX. 1700 (STöRKREIS) MM
SPINDLE TURNING SPEED RANGE: 1250/2950/6880/15000 U/MIN
OUTPUT: 7/16/7/2 (100 %) KW
OUTPUT: 8,4/19,2/8,4/2,4 (60 %) KW
TORQUE: 60/55/12/1,5 NM
FEED SPEED: 0 - 15000 (Z) M/MIN.
FEED SPEEDS: 100 - 10000 (X) MM/MIN
FEED SPEEDS: 100 - 10000 (Y) MM/MIN
FEED SPEEDS: 100 - 10000 (W) MM/MIN
TABLE LOAD: 5000 (NUTZLAST) DAN
TOTAL POWER REQUIREMENT: 32 (100A) KW
WEIGHT OF THE MACHINE CA.: 16650 KG
DIMENSIONS OF THE MACHINE CA.: 7,8 X 6,15 X 3,26 M
CNC DEEPHOLE BORING MACHINE WITH PALLET-CHANGER

EQUIPMENT:
PALLET CHANGER WITH TWO PALLETS
HOUSING
15 OFF BORING BARS
MACHINE DOCUMENTATION IN GERMAN LANGUAGE
COOLANT EQUIPMENT
CHIP (SWARF) CONVEYOR

MACHINE IN VERY GOOD CONDITION, NOW STORED IN OUR WAREHOUSE IN DüSSELDORF (NOT
UNDER POWER).

EQUIPMENT / ACCESSORIES:
PALLET CHANGER WITH TWO PALLETS
HOUSING
15 OFF BORING BARS
MACHINE DOCUMENTATION IN GERMAN LANGUAGE
COOLANT EQUIPMENT
CHIP (SWARF) CONVEYOR

THE PREVIOUS OWNER IST HE COMPANY MULTIVAC.
MULTIVAC IS THE LEADER IN HORIZONTAL THERMOFORMING PACKAGING SOLUTIONS.
WITH OUR THERMOFORMING MACHINES PACK EFFICIENTLY AND ECONOMICALLY A WIDE RANGE
OF PRODUCTS SUCH.
AS FOOD, INDUSTRIAL AND CONSUMER PRODUCTS AND MEDICAL AND PHARMACEUTICAL
PRODUCTS.

SOME MORE TECHNICAL DETAILS:
CNC DEEP HOLE DRILLING MACHINE WITH PALLET CHANGER

TECHNICAL SPECIFICATIONS:
SCOPE OF APPLICATION
DEEP DRILLING
SPINDLE NUMBER 1
BORE SLIDE STROKE 1500 MM, WITH 2 STEADIES 1340 MM
DRILLING METHOD SINGLE-FLUTED GUN DRILL
DRILLING DEPTH MAX. 1000 MM WITH 2 STEADIES
DRILLING (IN STEEL ST.60)
MIN. DIAMETER 4 MM (STANDARD)
MIN. DIAMETER 3 MM (OPTIONAL)
MAX. DIAMETER 25 MM
WITH SINGLE-FLUTED GUN DRILL

BORING DRIVE
MANUFACTURER FORTUNA, MSL-RZ 210 FL 15/7
WITHOUT SPINDLE COOLING, WITH LIFETIME GREASE FILLING, WITH PTC,
WITH TEMPERATURE SENSOR, WITH SEALING AIR CONNECTION 0,8 BAR
SPEEDS 1250/2950/6880/15000 RPM
POWER 7/16/7/2 KW AT 100%
POWER 8.4 / 19.2 / 8.4 / 2.4 KW AT 60%
TORQUE 60/55/12 / 1.5 NM

Z-AXIS
FEED SPEEDS 0-15000 MM / MIN.
RAPID TRAVERSE RATE 15 M / MIN.
ENGINE POWER 20 NM AT 2000 RPM
INTEGRATED ENCODER TYPE ERN 1387
FEED FORCE 1000 DAN
TRAVEL 1500 MM (1340 MM WITH 2 STEADIES)

X AXIS
ROLLER MONORAIL RUE 55
FEED SPEEDS FROM 100 TO 10000 MM / MIN.
RAPID TRAVERSE 15 M / MIN.
ENGINE POWER 27 NM AT 2000 RPM
INTEGRATED ENCODER TYPE AG 612
TRAVEL 2000 MM

Y-AXIS
ROLLER MONORAIL RUE 55
FEED SPEEDS FROM 100 TO 10000 MM / MIN.
RAPID TRAVERSE 15 M / MIN.
ENGINE POWER 27 NM AT 2000 RPM
INTEGRATED ENCODER TYPE ERN 1387
TRAVEL 1000 MM


W-AXIS
ROLLER MONORAIL RUE 55
FEED SPEEDS FROM 100 TO 10000 MM / MIN.
RAPID TRAVERSE RATE 15 M / MIN.
ENGINE POWER 27 NM AT 2000 RPM
INTEGRATED ENCODER TYPE AG 612
TRAVEL 1000 MM

WORKTABLE
CLAMPING SIZE 1000 X 800 MM
ANGLE MEASUREMENT DIRECTLY DISPLAY ON THE SCREEN, 360 DEG CONTINUOUSLY
ROTATABLY.
B-AXIS INTEGRATED ROTARY ENCODER TYPE ROD 426
MAX. TABLE LOAD 5000 DAN
TRANSPORT CAPACITY 25000 NM
T-SLOTS ALONG 7 PIECE
ALIGNING SLOTS LENGTHWISE AND CROSSWISE 1
CENTERING 1

NC TABLE
TYPE PKTF
SIZE 45
ENGINE POWER 27 NM
SPEED 3000 RPM
REDUCTION 1: 180 + 1: 2
CLAMPING HYDRAULICALLY
CLAMPING FORCE 34 KN
MAX. TURNING SPEED 10 1 / MIN.
DIVIDING ACCURACY +/- 6.75

VOLTAGE
OPERATING VOLTAGE 400 V
FREQUENCY 50 HZ
CONTROL VOLTAGE 230 V / 24 V
TOTAL POWER 32 KW
CROSS SECTION 35 MM²
FUSE 100 A
RATED CURRENT 72 A

MAIN DIMENSIONS
LENGTH X WIDTH X HEIGHT APPROX. 7800 X 6150 X 3260 MM
TRANSPORT WEIGHT 15 T

COOLANT SYSTEM
COOLING LUBRICANT EMULSION
KM-1000 L CONTAINER WITH LEVEL INDICATOR
SUBMERSIBLE PUMP 100 LTR. AT 5 BAR
SUBMERSIBLE PUMP 20 LTR. AT 0.52 BAR
HIGH-PRESSURE PUMP UNIT 56 L / MIN. AT 80 BAR, 75 L / MIN. AT 70 BAR
?ROLLENSIEB? FILTER FLOW RATE 100 L / MIN.
SUBMERSIBLE PUMP 100 LTR. AT 0.5 BAR
CHIP CONVEYING CHIPS AMOUNT APPROXIMATELY 25 KG / H

DESCRIPTION OF THE MACHINE:
THE COMPLETE SOLUTION WITH HIGH-FREQUENCY SPINDLE AND COOLANT SYSTEM IN
MACHINE BED IS INTEGRATED FOR MACHINING DIFFERENT WORKPIECES SUITABLE.

THE DRILLING MACHINE IS EQUIPPED WITH A CIRCULAR DIVIDING TABLE.
THE ROTARY INDEXING TABLE IS INDIVIDUALLY DISPLACED.

THE WORKPIECE CLAMPING, DRILL BUSHING AND EDITING TOOLS (POSSIBLY
STEADY REST) ARE SELECT THE WORKPIECE TO BE MACHINED ACCORDINGLY

(ADDITIONAL EQUIPMENT).
PROCESSING METHODS
THIS BORING MACHINE IS DESIGNED FOR DEEP DRILLING (SINGLE-FLUTED GUN DRILL).

PROCESSING UNIT
THE SPINDLE UNIT IS MOUNTED ON A FEED SLIDE WITH LINEAR ROLLING GUIDES
ASSEMBLED.
THE FEED DRIVE IS INFINITELY ADJUSTABLE.
THE RAPID TRAVERSE SPEED IS DETERMINED BY THE NC PROGRAM (PARAMETERS)
AND MONITORED.

THE SPINDLE SPEED IS INFINITELY VARIABLE (FREQUENCY CONTROLLED) THE
PERFORMANCE DATA FOR THE MAIN AND FEED DRIVES THROUGH THE DIGITAL
DRIVE TECHNOLOGY IS AVAILABLE DIRECTLY FROM THE INVERTERS.

THE SPINDLE BEARING IS A PRECISION SPINDLE BEARING WITH LIFETIME GREASE
LUBRICATION.

SEALING AIR AGAINST THE PENETRATION OF THE COOLING LUBRICANT.

WORKPIECE CLAMPING
THE NC ROTARY TABLE HAS A CLAMPING AREA OF 1000 X 800 MM.
THE ROTARY INDEXING TABLE IS ADJUSTABLE BY ELECTRIC MOTORS. THE POSITION
IS DETECTED BY A ROTARY ENCODER AND DISPLAYED IN THE CONTROL PICTURE.
THE ROTARY INDEXING TABLE IS HYDRAULICALLY CLAMPED IN THE BASIC POSITION.
THE SURFACE OF THE CIRCULAR TABLE TOP SECTION IS AS PALLET CLAMPING STATION
EDUCATED.

THE TRAVELING COLUMN (X-AXIS) IS MOUNTED ON LINEAR ROLLER GUIDES.
THE FEED DRIVE IS ADJUSTABLE. THE POSITIONING OF THE TRAVELING COLUMN
VIA THE THE NC PROGRAM.

STEADY REST
THE STEADY REST SERVES TO SUPPORT THE DRILL PIPE. THE STEADY REST BUSH
REDUCES THE DRILL PIPE AND MACHINING VIBRATIONS. THE RETREAT IS
DETERMINED VIA A ROLLER CHAIN AND SET.

ADDITIONAL EQUIPMENT
THE COOLANT SYSTEM WITH HIGH-PRESSURE DIAPHRAGM PISTON PUMP, CHIP CONVEYOR
?ROLLENSIEB? FILTER, MUD PUMP, SUBMERSIBLE PUMP PUMPS THE CLEANED COOLING
LUBRICANT FOR DRILLING.

CNC CONTROL CONSISTING OF A SIEMENS SINUMERIK 840 D INCLUDING
PLC S7-300, SLIMLINE OPERATOR PANEL (OP31) WITH COLOR DISPLAY AND OPERATING AND
CONTROL PANEL WITH OVERRIDE FUNCTION.

NC / PLC
THE MACHINE IS EQUIPPED WITH AN NC CONTROL FOR DEEP HOLE DRILLING MACHINES AND A
MEMORY PROGRAMMING CONTROLLER (PLC) EQUIPPED.

EQUIPMENT:
FULLY PROTECTIVE HOUSING
SEPARATE ELECTRIC CABINET
MACHINE DOCUMENTATION IN GERMAN LANGUAGE
VARIOUS DRILL SPINDLES, 15 PCS.






Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-<b>properties:</b>

used scissor roller not powered
color: silver, blue
expertly disassembled and packed
6 feet
height-adjustable

<b>technical data

pallet roller conveyor dimensions approx.</b>

extendable: 4000 to 8500mm
width: 700 mm
roll width: 600 mm
diameter roll: 50mm

<b>tailor-made solutions for your intralogistics</b>

we are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! gladly we will create you an individual offer or advise on the design or assembly questions. just let your needs and local conditions us to.

take advantage of our many years of experience and our excellent network of professionals. for companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.

together, we will work out ways to optimize your process and material flow cost effectively and sustainably. we can offer you even fully automatic sorting equipment or additional components such as picking racks or containers. <B>PROPERTIES:</B> USED SCISSOR ROLLER NOT POWERED COLOR: SILVER, BLUE EXPERTLY DISASSEMBLED AND PACKED 6 FEET HEIGHT-ADJUSTABLE <B>TECHNICAL DATA PALLET ROLLER CONVEYOR DIMENSIONS APPROX.</B> EXTENDABLE: 4000 TO 8500MM WIDTH: 700 MM ROLL WIDTH: 600 MM DIAMETER ROLL: 50MM <B>TAILOR-MADE SOLUTIONS FOR YOUR INTRALOGISTICS</B> WE ARE YOUR COMPETENT PARTNER FOR ROLLER CONVEYORS, BELT LIFTS, INCLINED CONVEYORS OR TELESCOPES TO THE LOADING AND UNLOADING OF GOODS! GLADLY WE WILL CREATE YOU AN INDIVIDUAL OFFER OR ADVISE ON THE DESIGN OR ASSEMBLY QUESTIONS. JUST LET YOUR NEEDS AND LOCAL CONDITIONS US TO. TAKE ADVANTAGE OF OUR MANY YEARS OF EXPERIENCE AND OUR EXCELLENT NETWORK OF PROFESSIONALS. FOR COMPANIES OF VARIOUS INDUSTRIES, SUCH AS: LOGISTICS, PHARMACEUTICAL INDUSTRY, CRAFTS OR THE ELECTRONICS INDUSTRY WE HAVE ALREADY SUCCESSFULLY IMPLEMENTED PROJECTS. TOGETHER, WE WILL WORK OUT WAYS TO OPTIMIZE YOUR PROCESS AND MATERIAL FLOW COST EFFECTIVELY AND SUSTAINABLY. WE CAN OFFER YOU EVEN FULLY AUTOMATIC SORTING EQUIPMENT OR ADDITIONAL COMPONENTS SUCH AS PICKING RACKS OR CONTAINERS.
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Ubicación: Land-amtec flowwrap f150-3xl80gn - 1 rotary knife - guiding device - new design<br><br>flowwrap machine - new design - for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. film supply from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 680mm | 1 rotating knife | 220v, 2.8kw | no compressed air required | max. speed of the machine in neutral: 150 cycles/min | max. bag (not product) dimensions (mm): l(100-450)xw(50-250)xh(0-80) | machine dimensions (mm): l3990xw1100xh1520 | weight (net/gross): 1050/1150kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F150-3XL80GN - 1 ROTARY KNIFE - GUIDING DEVICE - NEW DESIGN

FLOWWRAP MACHINE - NEW DESIGN - FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, LARGE PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. FILM SUPPLY FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 680MM | 1 ROTATING KNIFE | 220V, 2.8KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 150 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(100-450)XW(50-250)XH(0-80) | MACHINE DIMENSIONS (MM): L3990XW1100XH1520 | WEIGHT (NET/GROSS): 1050/1150KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Precio: 9.000 GBP
Ubicación: Land-single head labeller equipped with: wilux print ag wrap labelling system (manufacturer’s website: https://www.wilux.ch/home-wilux-print.html); wilux codlux lp-80 hot foil printer/emboss coder (including manual in german language); mr-selbsklebe technik control panel; gaping wheel. designed to handle labels of height up to 200mm. speed approximately 60 labels per minute depending on label type and size. all stainless steel construction. variable speed 900mm wide slat conveyor. machine size: 2050mm x 1050mm x 1600mm high, approx weight 350kg. checked/tested/running. SINGLE HEAD LABELLER EQUIPPED WITH: WILUX PRINT AG WRAP LABELLING SYSTEM (MANUFACTURER’S WEBSITE: HTTPS://WWW.WILUX.CH/HOME-WILUX-PRINT.HTML); WILUX CODLUX LP-80 HOT FOIL PRINTER/EMBOSS CODER (INCLUDING MANUAL IN GERMAN LANGUAGE); MR-SELBSKLEBE TECHNIK CONTROL PANEL; GAPING WHEEL. DESIGNED TO HANDLE LABELS OF HEIGHT UP TO 200MM. SPEED APPROXIMATELY 60 LABELS PER MINUTE DEPENDING ON LABEL TYPE AND SIZE. ALL STAINLESS STEEL CONSTRUCTION. VARIABLE SPEED 900MM WIDE SLAT CONVEYOR. MACHINE SIZE: 2050MM X 1050MM X 1600MM HIGH, APPROX WEIGHT 350KG. CHECKED/TESTED/RUNNING.
Vendedor: Lex Machinery Ltd
Año de construcción: usado
Ubicación: Land-amtec flowwrap f150-2xl80gn - 1 rotary knife - guiding device - new design<br><br>flowwrap machine - new design - for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. film supply from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 480mm | 1 rotating knife | 220v, 2.8kw | no compressed air required | max. speed of the machine in neutral: 150 cycles/min | max. bag (not product) dimensions (mm): l(100-450)xw(50-210)xh(0-80) | machine dimensions (mm): l3990xw900xh1468 | weight (net/gross): 900/950kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F150-2XL80GN - 1 ROTARY KNIFE - GUIDING DEVICE - NEW DESIGN

FLOWWRAP MACHINE - NEW DESIGN - FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, LARGE PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. FILM SUPPLY FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 480MM | 1 ROTATING KNIFE | 220V, 2.8KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 150 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(100-450)XW(50-210)XH(0-80) | MACHINE DIMENSIONS (MM): L3990XW900XH1468 | WEIGHT (NET/GROSS): 900/950KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-diesel generators 2 x 5.7 mw rolls royce – bergen 2015 never installed

from cancelled marine project two 5.6 mw rolls royce bergen 720 rpm b32-40v12a type diesel generators with auxiliaries all made in 2015 and still in factory packages. these diesel generators are designed to run with medium density fuel oil (mdo) and light diesel oil (ldo). engines are coupled with brushless abb 6.6 kv / 60 hz synchronous generators all installed on common base frame.  these units can be used both in marine or land-based power generation application. auxiliary equipment includes scr system for nox reduction. these engines qualify to requirements of imo tier ii for nox levels. all equipment is in original factory boxes and in a warm warehouse condition. 

technical data 
engine type:			rolls royce bergen b32:40v12a 2
configuration:		v - 12 cylinder
number of cylinders:		12
cylinder bore:		320 mm
piston stroke:			400 mm
rated speed:			720 rpm
rated power (mcr), engine:	5 760 kw
rated active power, generator:	5 585 kw
mean effective pressure:		24.9 bar
mean piston speed:		10 m/s
displacement:		386 l

alternator type:		abb amg 0900mr10 lse
output:			6 984 kva
duty:			s1
voltage:			6 600 v
current:			611 a
power factor:			0,8
frequency:			60 hz
speed:			720 rpm
overspeed:			864 rpm
weight:			21 250 kg
inertia:			1 380 kgm^2
protection by enclosure:		ip44
cooling method:		water cooled - ic8a1w7 DIESEL GENERATORS 2 X 5.7 MW ROLLS ROYCE – BERGEN 2015 NEVER INSTALLED FROM CANCELLED MARINE PROJECT TWO 5.6 MW ROLLS ROYCE BERGEN 720 RPM B32-40V12A TYPE DIESEL GENERATORS WITH AUXILIARIES ALL MADE IN 2015 AND STILL IN FACTORY PACKAGES. THESE DIESEL GENERATORS ARE DESIGNED TO RUN WITH MEDIUM DENSITY FUEL OIL (MDO) AND LIGHT DIESEL OIL (LDO). ENGINES ARE COUPLED WITH BRUSHLESS ABB 6.6 KV / 60 HZ SYNCHRONOUS GENERATORS ALL INSTALLED ON COMMON BASE FRAME. THESE UNITS CAN BE USED BOTH IN MARINE OR LAND-BASED POWER GENERATION APPLICATION. AUXILIARY EQUIPMENT INCLUDES SCR SYSTEM FOR NOX REDUCTION. THESE ENGINES QUALIFY TO REQUIREMENTS OF IMO TIER II FOR NOX LEVELS. ALL EQUIPMENT IS IN ORIGINAL FACTORY BOXES AND IN A WARM WAREHOUSE CONDITION. TECHNICAL DATA ENGINE TYPE: ROLLS ROYCE BERGEN B32:40V12A 2 CONFIGURATION: V - 12 CYLINDER NUMBER OF CYLINDERS: 12 CYLINDER BORE: 320 MM PISTON STROKE: 400 MM RATED SPEED: 720 RPM RATED POWER (MCR), ENGINE: 5 760 KW RATED ACTIVE POWER, GENERATOR: 5 585 KW MEAN EFFECTIVE PRESSURE: 24.9 BAR MEAN PISTON SPEED: 10 M/S DISPLACEMENT: 386 L ALTERNATOR TYPE: ABB AMG 0900MR10 LSE OUTPUT: 6 984 KVA DUTY: S1 VOLTAGE: 6 600 V CURRENT: 611 A POWER FACTOR: 0,8 FREQUENCY: 60 HZ SPEED: 720 RPM OVERSPEED: 864 RPM WEIGHT: 21 250 KG INERTIA: 1 380 KGM^2 PROTECTION BY ENCLOSURE: IP44 COOLING METHOD: WATER COOLED - IC8A1W7
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec flowwrap f40-2xl110gpn - 1 pendular knife - guiding device - new design<br><br>flowwrap machine - new design - for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. film feed from the top. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 600mm | 1 pendular knife | 220v, 3.6kw | no compressed air required | max. speed of the machine in neutral: 40 cycles/min | max. bag (not product) dimensions (mm): l(120-450)xw(50-200)xh(10-110) | machine dimensions (mm): l4380xw970xh1500 | weight (net/gross): 1160/1260kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F40-2XL110GPN - 1 PENDULAR KNIFE - GUIDING DEVICE - NEW DESIGN

FLOWWRAP MACHINE - NEW DESIGN - FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, LARGE PRODUCTS. FILM FEED FROM THE TOP. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 600MM | 1 PENDULAR KNIFE | 220V, 3.6KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 40 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(120-450)XW(50-200)XH(10-110) | MACHINE DIMENSIONS (MM): L4380XW970XH1500 | WEIGHT (NET/GROSS): 1160/1260KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-diesel generators 2 x 4.2 mw rolls royce – bergen 2015 never installed

from cancelled marine project two 4.2 mw rolls royce bergen 720 rpm b32-40l9a type diesel generators with auxiliaries all made in 2015 and still in factory packages. these diesel generators are designed to run with medium density fuel oil (mdo) and light diesel oil (ldo). engines are coupled with brushless abb 6.6 kv / 60 hz synchronous generators all installed on common base frame.  these units can be used both in marine or land-based power generation application. auxiliary equipment includes scr system for nox reduction. these engines qualify to requirements of imo tier ii for nox levels. all equipment is in original factory boxes and in a warm warehouse condition. 

technical data 
engine type:			rolls royce bergen b32:40l9a 2 
configuration:		in line - 9 cylinder
cylinder bore:		320 mm
piston stroke:			400 mm
rated speed:			720 rpm
rated power (mcr), engine:	4 320 kw
rated active power, generator:	4 190 kw
mean effective pressure:		24.9 bar
mean piston speed:		10 m/s
displacement:		289 l

alternator type:		abb amg 0900sm10 lse
output:			5 238 kva
duty:			s1
voltage:			6 600 v
current:			458 a
power factor:			0,8
frequency:			60 hz
speed:			720 rpm
overspeed:			864 rpm
weight:			20 000 kg
inertia:			1140 kgm^2
protection by enclosure:		ip44
cooling method:		water cooled - ic8a1w7 DIESEL GENERATORS 2 X 4.2 MW ROLLS ROYCE – BERGEN 2015 NEVER INSTALLED FROM CANCELLED MARINE PROJECT TWO 4.2 MW ROLLS ROYCE BERGEN 720 RPM B32-40L9A TYPE DIESEL GENERATORS WITH AUXILIARIES ALL MADE IN 2015 AND STILL IN FACTORY PACKAGES. THESE DIESEL GENERATORS ARE DESIGNED TO RUN WITH MEDIUM DENSITY FUEL OIL (MDO) AND LIGHT DIESEL OIL (LDO). ENGINES ARE COUPLED WITH BRUSHLESS ABB 6.6 KV / 60 HZ SYNCHRONOUS GENERATORS ALL INSTALLED ON COMMON BASE FRAME. THESE UNITS CAN BE USED BOTH IN MARINE OR LAND-BASED POWER GENERATION APPLICATION. AUXILIARY EQUIPMENT INCLUDES SCR SYSTEM FOR NOX REDUCTION. THESE ENGINES QUALIFY TO REQUIREMENTS OF IMO TIER II FOR NOX LEVELS. ALL EQUIPMENT IS IN ORIGINAL FACTORY BOXES AND IN A WARM WAREHOUSE CONDITION. TECHNICAL DATA ENGINE TYPE: ROLLS ROYCE BERGEN B32:40L9A 2 CONFIGURATION: IN LINE - 9 CYLINDER CYLINDER BORE: 320 MM PISTON STROKE: 400 MM RATED SPEED: 720 RPM RATED POWER (MCR), ENGINE: 4 320 KW RATED ACTIVE POWER, GENERATOR: 4 190 KW MEAN EFFECTIVE PRESSURE: 24.9 BAR MEAN PISTON SPEED: 10 M/S DISPLACEMENT: 289 L ALTERNATOR TYPE: ABB AMG 0900SM10 LSE OUTPUT: 5 238 KVA DUTY: S1 VOLTAGE: 6 600 V CURRENT: 458 A POWER FACTOR: 0,8 FREQUENCY: 60 HZ SPEED: 720 RPM OVERSPEED: 864 RPM WEIGHT: 20 000 KG INERTIA: 1140 KGM^2 PROTECTION BY ENCLOSURE: IP44 COOLING METHOD: WATER COOLED - IC8A1W7
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec flowwrap f80-xl80gpn - 1 pendular knife - guiding device - new design<br><br>flowwrap machine - new design - for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. film feed from the top. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 450mm | 1 pendular knife | 220v, 3.2kw | no compressed air required | max. speed of the machine in neutral: 80 cycles/min | max. bag (not product): dimensions (mm): l(120-450)xw(50-160)xh(10-80) | machine dimensions (mm): l4380xw870xh1500 | weight (net/gross): 960/1060kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F80-XL80GPN - 1 PENDULAR KNIFE - GUIDING DEVICE - NEW DESIGN

FLOWWRAP MACHINE - NEW DESIGN - FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, MEDIUM/LARGER PRODUCTS. FILM FEED FROM THE TOP. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 450MM | 1 PENDULAR KNIFE | 220V, 3.2KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 80 CYCLES/MIN | MAX. BAG (NOT PRODUCT): DIMENSIONS (MM): L(120-450)XW(50-160)XH(10-80) | MACHINE DIMENSIONS (MM): L4380XW870XH1500 | WEIGHT (NET/GROSS): 960/1060KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-flavoured still water production equipment apv 15 000 l/h 

complete flavoured still water production plant made by french apv and polish spx in year 2008. the processing plant has every item from sugar melting, flavouring, pasteurizing, storaging, chilled water and steam production. all design is made by apv, control system is build with siemens simatic s7 series plc. 

techncial charasteristics:  
manufacturer:                          apv and spx
installation year:                       2008 
capacity:                                  15 000 liters / hour 

main equipment
•	liquiverter 500 liters stainless steel sugar mixing tank with 18.5 kw agitator
•	compond syrup mixing tanks 2 x 6000 liters, both with 4 kw agitator and automatic cip 
•	sugar measuring and flavouring unit 
•	sugar storage tanks 2 x 17400 liters, insulated tanks with automatic cip and air blowing system 
•	storage tank before filling line, capacity 6000 liters with automatic cip, nitrogen injection system and 3 kw discharge pump. 
•	steam generator sms 3.5 bar, 150 c
•	water chiller 
•	cip line with 4 tanks. FLAVOURED STILL WATER PRODUCTION EQUIPMENT APV 15 000 L/H COMPLETE FLAVOURED STILL WATER PRODUCTION PLANT MADE BY FRENCH APV AND POLISH SPX IN YEAR 2008. THE PROCESSING PLANT HAS EVERY ITEM FROM SUGAR MELTING, FLAVOURING, PASTEURIZING, STORAGING, CHILLED WATER AND STEAM PRODUCTION. ALL DESIGN IS MADE BY APV, CONTROL SYSTEM IS BUILD WITH SIEMENS SIMATIC S7 SERIES PLC. TECHNCIAL CHARASTERISTICS: MANUFACTURER: APV AND SPX INSTALLATION YEAR: 2008 CAPACITY: 15 000 LITERS / HOUR MAIN EQUIPMENT • LIQUIVERTER 500 LITERS STAINLESS STEEL SUGAR MIXING TANK WITH 18.5 KW AGITATOR • COMPOND SYRUP MIXING TANKS 2 X 6000 LITERS, BOTH WITH 4 KW AGITATOR AND AUTOMATIC CIP • SUGAR MEASURING AND FLAVOURING UNIT • SUGAR STORAGE TANKS 2 X 17400 LITERS, INSULATED TANKS WITH AUTOMATIC CIP AND AIR BLOWING SYSTEM • STORAGE TANK BEFORE FILLING LINE, CAPACITY 6000 LITERS WITH AUTOMATIC CIP, NITROGEN INJECTION SYSTEM AND 3 KW DISCHARGE PUMP. • STEAM GENERATOR SMS 3.5 BAR, 150 C • WATER CHILLER • CIP LINE WITH 4 TANKS.
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec sleeveshrink s15 pro stacker<br><br>pro-version of our standard sleeve packer / film band roller with stacking unit for stacking products into 1-5 layers and/or in multi-rows. suitable for cigarette packs, soap, toothpaste, stationary, etc. fully automatic infeed of products, automatic transport into optional tunnel (shrinktunnel-pe-xl) and outfeed. completely closed housing, new design and strong structure. - technical specifications (can vary regarding customers specifications !): mitsubishi/japan plc | 380v, 2kw | 6bar / 0.1m³/min | up to 15 cycles/min | max. product dimensions (mm) l(50-550)xw(50-290)xh(15-250) | machine dimensions (mm) l1300xw2305xh1800 | weight (net/gross): 600/650kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SLEEVESHRINK S15 PRO STACKER

PRO-VERSION OF OUR STANDARD SLEEVE PACKER / FILM BAND ROLLER WITH STACKING UNIT FOR STACKING PRODUCTS INTO 1-5 LAYERS AND/OR IN MULTI-ROWS. SUITABLE FOR CIGARETTE PACKS, SOAP, TOOTHPASTE, STATIONARY, ETC. FULLY AUTOMATIC INFEED OF PRODUCTS, AUTOMATIC TRANSPORT INTO OPTIONAL TUNNEL (SHRINKTUNNEL-PE-XL) AND OUTFEED. COMPLETELY CLOSED HOUSING, NEW DESIGN AND STRONG STRUCTURE. - TECHNICAL SPECIFICATIONS (CAN VARY REGARDING CUSTOMERS SPECIFICATIONS !): MITSUBISHI/JAPAN PLC | 380V, 2KW | 6BAR / 0.1M³/MIN | UP TO 15 CYCLES/MIN | MAX. PRODUCT DIMENSIONS (MM) L(50-550)XW(50-290)XH(15-250) | MACHINE DIMENSIONS (MM) L1300XW2305XH1800 | WEIGHT (NET/GROSS): 600/650KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-filling line khs 50 000 bph new and returnable bottles glass bottles 
  
this line is made by khs in year 2005 and it was in operation till july 2013. it still installed, fully operational and is suitable for filling 0.3 – 0.5 liter glass bottles with beer and soft drinks, capacity upto 50 000 bph in 0.5 liter bottles. this line has also a bottle washer but not crate handling.
  
main characteristics
•	capacity 50 000 bph at 0.5 liter bottles
•	 made by khs in year 2005, in operation till 2013, still installed
•	for both new and returnable glass bottles, operated for 0.5 liter bottles only
•	secondary packaging kisters shrink tray packer and khs palletizer
•	operation controls made with siemens simatic s7 plc system
•	complete line in fair condition and immediately available for relocation
  
list of main equipment
1.	bottle depalletizer khs innopal
2.	bottle washing machine khs innoclean – compact design 
a.	capacity 55000 bph
b.	double ended
c.	two washing sections and a rinsing section
3.	empty bottle inspector omnivision ii by filtec year 2008
4.	filling block khs innofil dmg vvf/svf, year 2005 
a.	rinser with 112 heads
b.	filler with 120 filling heads
c.	18 capping stations for crown cork
d.	hot water injection for beer foam creating before closing
e.	automatic outside washing system
f.	comes with 2 sets of spare parts for each (two) bottle format
g.	crown cork feeding system by msn magnettechnik (with magnet conveyor) 
5.	 level inspection system khs metec promecon 4000 with two measuring bridges (x-ray)
6.	flash pasteurizer khs innopro kze 
a.	with 11 m3 buffer tank, diameter 2.0 m, insulated
7.	air dryer aci one section approx. 2 meters
8.	labeling machine khs innoket kl 2080, year 2005 
a.	type kl 2080-40/120-48 pm p1
b.	with  two labeling  stations for 3 labels – front, back, neck
c.	how glue system
d.	inbult date printer lasetec (laser)
e.	data printer videojet inkjet printer excel 170 i
9.	label inspector khs metec promecon 3000 with measuring bridge (x-ray)
10.	kisters tsp 050 b secondary packaging machine, year 2005 
a.	for tray, film and colored film
b.	packaging configurations 5 x 4 (6 x 4)
11.	 transport system with two lines after secondary packaging for correct palletizer feeding with package turning unit
12.	palletizer khs innopal pn 1 n (h) 2
13.	pallet stretch wrapping machine robopak
14.	pallet conveyor to warehouse FILLING LINE KHS 50 000 BPH NEW AND RETURNABLE BOTTLES GLASS BOTTLES THIS LINE IS MADE BY KHS IN YEAR 2005 AND IT WAS IN OPERATION TILL JULY 2013. IT STILL INSTALLED, FULLY OPERATIONAL AND IS SUITABLE FOR FILLING 0.3 – 0.5 LITER GLASS BOTTLES WITH BEER AND SOFT DRINKS, CAPACITY UPTO 50 000 BPH IN 0.5 LITER BOTTLES. THIS LINE HAS ALSO A BOTTLE WASHER BUT NOT CRATE HANDLING. MAIN CHARACTERISTICS • CAPACITY 50 000 BPH AT 0.5 LITER BOTTLES • MADE BY KHS IN YEAR 2005, IN OPERATION TILL 2013, STILL INSTALLED • FOR BOTH NEW AND RETURNABLE GLASS BOTTLES, OPERATED FOR 0.5 LITER BOTTLES ONLY • SECONDARY PACKAGING KISTERS SHRINK TRAY PACKER AND KHS PALLETIZER • OPERATION CONTROLS MADE WITH SIEMENS SIMATIC S7 PLC SYSTEM • COMPLETE LINE IN FAIR CONDITION AND IMMEDIATELY AVAILABLE FOR RELOCATION LIST OF MAIN EQUIPMENT 1. BOTTLE DEPALLETIZER KHS INNOPAL 2. BOTTLE WASHING MACHINE KHS INNOCLEAN – COMPACT DESIGN A. CAPACITY 55000 BPH B. DOUBLE ENDED C. TWO WASHING SECTIONS AND A RINSING SECTION 3. EMPTY BOTTLE INSPECTOR OMNIVISION II BY FILTEC YEAR 2008 4. FILLING BLOCK KHS INNOFIL DMG VVF/SVF, YEAR 2005 A. RINSER WITH 112 HEADS B. FILLER WITH 120 FILLING HEADS C. 18 CAPPING STATIONS FOR CROWN CORK D. HOT WATER INJECTION FOR BEER FOAM CREATING BEFORE CLOSING E. AUTOMATIC OUTSIDE WASHING SYSTEM F. COMES WITH 2 SETS OF SPARE PARTS FOR EACH (TWO) BOTTLE FORMAT G. CROWN CORK FEEDING SYSTEM BY MSN MAGNETTECHNIK (WITH MAGNET CONVEYOR) 5. LEVEL INSPECTION SYSTEM KHS METEC PROMECON 4000 WITH TWO MEASURING BRIDGES (X-RAY) 6. FLASH PASTEURIZER KHS INNOPRO KZE A. WITH 11 M3 BUFFER TANK, DIAMETER 2.0 M, INSULATED 7. AIR DRYER ACI ONE SECTION APPROX. 2 METERS 8. LABELING MACHINE KHS INNOKET KL 2080, YEAR 2005 A. TYPE KL 2080-40/120-48 PM P1 B. WITH TWO LABELING STATIONS FOR 3 LABELS – FRONT, BACK, NECK C. HOW GLUE SYSTEM D. INBULT DATE PRINTER LASETEC (LASER) E. DATA PRINTER VIDEOJET INKJET PRINTER EXCEL 170 I 9. LABEL INSPECTOR KHS METEC PROMECON 3000 WITH MEASURING BRIDGE (X-RAY) 10. KISTERS TSP 050 B SECONDARY PACKAGING MACHINE, YEAR 2005 A. FOR TRAY, FILM AND COLORED FILM B. PACKAGING CONFIGURATIONS 5 X 4 (6 X 4) 11. TRANSPORT SYSTEM WITH TWO LINES AFTER SECONDARY PACKAGING FOR CORRECT PALLETIZER FEEDING WITH PACKAGE TURNING UNIT 12. PALLETIZER KHS INNOPAL PN 1 N (H) 2 13. PALLET STRETCH WRAPPING MACHINE ROBOPAK 14. PALLET CONVEYOR TO WAREHOUSE
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec sleeveshrink s25 pro automatic<br><br>pro-version of our standard sleeve packer / film band roller for film wrapping of large products. fully automatic infeed of products, automatic transport into optional tunnel (shrinktunnel-pe-xl) and outfeed. completely closed housing, new design and strong structure. - technical specifications (can vary regarding customers specifications !): mitsubishi/japan plc | 380v, 2kw | 6bar / 0.1m³/min | max. speed of the machine in neutral: 25 cycles/min | max. product dimensions (mm): l(unlimited)xw(200-550)xh(15-250) | machine dimensions (mm): l1375xw1180xh1810 | weight (net/gross): 500/580kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SLEEVESHRINK S25 PRO AUTOMATIC

PRO-VERSION OF OUR STANDARD SLEEVE PACKER / FILM BAND ROLLER FOR FILM WRAPPING OF LARGE PRODUCTS. FULLY AUTOMATIC INFEED OF PRODUCTS, AUTOMATIC TRANSPORT INTO OPTIONAL TUNNEL (SHRINKTUNNEL-PE-XL) AND OUTFEED. COMPLETELY CLOSED HOUSING, NEW DESIGN AND STRONG STRUCTURE. - TECHNICAL SPECIFICATIONS (CAN VARY REGARDING CUSTOMERS SPECIFICATIONS !): MITSUBISHI/JAPAN PLC | 380V, 2KW | 6BAR / 0.1M³/MIN | MAX. SPEED OF THE MACHINE IN NEUTRAL: 25 CYCLES/MIN | MAX. PRODUCT DIMENSIONS (MM): L(UNLIMITED)XW(200-550)XH(15-250) | MACHINE DIMENSIONS (MM): L1375XW1180XH1810 | WEIGHT (NET/GROSS): 500/580KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-pet filling line kosme / krones 7000 bph

this pet line was made in year 1998 / 1999 by kosme for filling carbonated soft drinks at capacity of 7000 bph in 1.5liter containers. the line was in operation till 2015 and it was carefully marked and professionally dismantled in july 2017. the owner made proper cip before dismantling. the line was filling carbonated soft drinks in 0.5 0.75 and 1.5liter pet bottles. attached a set of pictures both before and after dismantling.

note: we have a professional partner who can offer to reinstall and commissioning this line at around 50 000 + all lifting equipment costs – driver+rent- if it will be re-installed one-to-one!

technical specification of pet line kosme 7000 bph:

make: kosme, famix, heuft, kaeser, lanfranchi, logopak, melegari s.p.a.
capacity: 7.000 bottles/h at 1,5l bottle
manufacturing: 1998 / 1999
filling product: water and carbonated soft drinks size: 0,5l, 0,75l and 1,5l (including existing handling parts + moulds)
cap standard: plastic screw capper pco 1810 – 28 mm
consumer packaging: 3 x 2 film (pad possible)
pallet: euro pallet 1.200 x 800 mm
availability: immediately

list of machines:

2 blow moulding machines
blow moulding machine 1: make kosme ksb 4000, year 1999, operating hours: ca. 23.000
blow moulding machine 2: make kosme ksb 4000, year 1999, operating hours: ca. 23.000

one preform-container for both blow moulding machines, 2 elevators, 2 roller sorters

compressor kaeser 2 x ds 171, dryer kaeser td 245, 2 piston compressor

air conveyor lanfranchi, pneumatically adjustable, 6 blowers, control unit siemens s5

mixer famix, year 1998, capacity 12.000 l/h, control unit relay

rinser/füller-bloc make melegari s.p.a., iso jet 40/40/8, year 04/1999, rinser 40-digits, filler 40-sigits, screw capper 8-digits - make arol, pick and place, neck handling, mechanical filling system velcorin-machine make lewa, typ da 922

cap feeding unit melegari, elpne, year 04/1999, with blower

fill level inspector unit heuft, with pusher into container

bottle conveyor with plastic chain, accumulation table, cable tray - performance open basket cable tray control unit siemens s7 300

labelling machine kosme, hotmelt, guard door, direction of rotation r-l, direction standard, douple infeed worm, size 12 bottle table, processing of paper labels, wraparound adhesion with hotmelt

coding unit videojet, year 1999 dating device with ink, at bottle conveyor, diagonal from above on bottle shoulder

packaging machine dimac, starfilm ls c, year 1999, only foil – pad possible, 3-line infeed, processing of printed foil possible

pack conveyor partly roller chain, partly width plastic chain, control unit siemens s7 300

handle applicator make twin pac mge, year 1999 foil and separate labels from a magazine

palletiser kosme/cosma, year 1998, 1-lane infeed below, integrated turning unit, layer pad inserter, roller grouping station, control unit siemens s7 300

pallet stretcher kosme/cosma, year 1998 typ avatbr, system dreharm mit niederhalter

pallet labeler make logopak

pallet conveyor roll and chain, pallet storage unit  PET FILLING LINE KOSME / KRONES 7000 BPH THIS PET LINE WAS MADE IN YEAR 1998 / 1999 BY KOSME FOR FILLING CARBONATED SOFT DRINKS AT CAPACITY OF 7000 BPH IN 1.5LITER CONTAINERS. THE LINE WAS IN OPERATION TILL 2015 AND IT WAS CAREFULLY MARKED AND PROFESSIONALLY DISMANTLED IN JULY 2017. THE OWNER MADE PROPER CIP BEFORE DISMANTLING. THE LINE WAS FILLING CARBONATED SOFT DRINKS IN 0.5 0.75 AND 1.5LITER PET BOTTLES. ATTACHED A SET OF PICTURES BOTH BEFORE AND AFTER DISMANTLING. NOTE: WE HAVE A PROFESSIONAL PARTNER WHO CAN OFFER TO REINSTALL AND COMMISSIONING THIS LINE AT AROUND 50 000 + ALL LIFTING EQUIPMENT COSTS – DRIVER+RENT- IF IT WILL BE RE-INSTALLED ONE-TO-ONE! TECHNICAL SPECIFICATION OF PET LINE KOSME 7000 BPH: MAKE: KOSME, FAMIX, HEUFT, KAESER, LANFRANCHI, LOGOPAK, MELEGARI S.P.A. CAPACITY: 7.000 BOTTLES/H AT 1,5L BOTTLE MANUFACTURING: 1998 / 1999 FILLING PRODUCT: WATER AND CARBONATED SOFT DRINKS SIZE: 0,5L, 0,75L AND 1,5L (INCLUDING EXISTING HANDLING PARTS + MOULDS) CAP STANDARD: PLASTIC SCREW CAPPER PCO 1810 – 28 MM CONSUMER PACKAGING: 3 X 2 FILM (PAD POSSIBLE) PALLET: EURO PALLET 1.200 X 800 MM AVAILABILITY: IMMEDIATELY LIST OF MACHINES: 2 BLOW MOULDING MACHINES BLOW MOULDING MACHINE 1: MAKE KOSME KSB 4000, YEAR 1999, OPERATING HOURS: CA. 23.000 BLOW MOULDING MACHINE 2: MAKE KOSME KSB 4000, YEAR 1999, OPERATING HOURS: CA. 23.000 ONE PREFORM-CONTAINER FOR BOTH BLOW MOULDING MACHINES, 2 ELEVATORS, 2 ROLLER SORTERS COMPRESSOR KAESER 2 X DS 171, DRYER KAESER TD 245, 2 PISTON COMPRESSOR AIR CONVEYOR LANFRANCHI, PNEUMATICALLY ADJUSTABLE, 6 BLOWERS, CONTROL UNIT SIEMENS S5 MIXER FAMIX, YEAR 1998, CAPACITY 12.000 L/H, CONTROL UNIT RELAY RINSER/FüLLER-BLOC MAKE MELEGARI S.P.A., ISO JET 40/40/8, YEAR 04/1999, RINSER 40-DIGITS, FILLER 40-SIGITS, SCREW CAPPER 8-DIGITS - MAKE AROL, PICK AND PLACE, NECK HANDLING, MECHANICAL FILLING SYSTEM VELCORIN-MACHINE MAKE LEWA, TYP DA 922 CAP FEEDING UNIT MELEGARI, ELPNE, YEAR 04/1999, WITH BLOWER FILL LEVEL INSPECTOR UNIT HEUFT, WITH PUSHER INTO CONTAINER BOTTLE CONVEYOR WITH PLASTIC CHAIN, ACCUMULATION TABLE, CABLE TRAY - PERFORMANCE OPEN BASKET CABLE TRAY CONTROL UNIT SIEMENS S7 300 LABELLING MACHINE KOSME, HOTMELT, GUARD DOOR, DIRECTION OF ROTATION R-L, DIRECTION STANDARD, DOUPLE INFEED WORM, SIZE 12 BOTTLE TABLE, PROCESSING OF PAPER LABELS, WRAPAROUND ADHESION WITH HOTMELT CODING UNIT VIDEOJET, YEAR 1999 DATING DEVICE WITH INK, AT BOTTLE CONVEYOR, DIAGONAL FROM ABOVE ON BOTTLE SHOULDER PACKAGING MACHINE DIMAC, STARFILM LS C, YEAR 1999, ONLY FOIL – PAD POSSIBLE, 3-LINE INFEED, PROCESSING OF PRINTED FOIL POSSIBLE PACK CONVEYOR PARTLY ROLLER CHAIN, PARTLY WIDTH PLASTIC CHAIN, CONTROL UNIT SIEMENS S7 300 HANDLE APPLICATOR MAKE TWIN PAC MGE, YEAR 1999 FOIL AND SEPARATE LABELS FROM A MAGAZINE PALLETISER KOSME/COSMA, YEAR 1998, 1-LANE INFEED BELOW, INTEGRATED TURNING UNIT, LAYER PAD INSERTER, ROLLER GROUPING STATION, CONTROL UNIT SIEMENS S7 300 PALLET STRETCHER KOSME/COSMA, YEAR 1998 TYP AVATBR, SYSTEM DREHARM MIT NIEDERHALTER PALLET LABELER MAKE LOGOPAK PALLET CONVEYOR ROLL AND CHAIN, PALLET STORAGE UNIT
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-x-travel:2000 mm<br/>y-travel:1000 mm<br/>z-travel:950 (opt.1500) mm<br/>t-slot (width-distance-quantity):22h8x7 stk. mm<br/>table area:2100x1050 mm<br/>max. table load:5000 kg<br/>spindle taper:50 sk<br/>spindle speeds:3500 1/min.<br/>spindle motor:15/18,5 (22/26 opt) kw<br/>feed:1~8000 mm/min<br/>rapid speed:10 m/min<br/>positioning accuracy:jis 6338;±0,005mm / 300mm vdi 3441:p0,014mm <br/>repeating accuracy:jis 6338:±0,003mm  vdi3441:ps0,01 mm <br/>total power requirement:30 kva<br/>weight of the machine ca.:11 t<br/>dimensions of the machine ca.: m<br/>universal milling head:manuell <br/>linear scales in x-y-z axes:von heidenhain; mit ausblasvorrichtung von  <br/>chip conveyor:schneckenausführung vorne/hinten <br/>ce-design: <br/>cnc control:siemens/fanuc/heidenhain <br/>rs232 terminal interface port: <br/>tools: <br/>levellig elements: <br/>halogen lamp: <br/>alarming lamp: <br/>technical documentation: <br/>ce-certificate: <br/><br/>trade term : f.o.b. taiwan port  shipment : within 14 days after receipt of your down payment payment : 30% down payment by swift transfer, 70% by irrevocable & sight l/c in our favor packing : by seaworthy package warranty:  12 months validity : 60 days X-TRAVEL:2000 MM
Y-TRAVEL:1000 MM
Z-TRAVEL:950 (OPT.1500) MM
T-SLOT (WIDTH-DISTANCE-QUANTITY):22H8X7 STK. MM
TABLE AREA:2100X1050 MM
MAX. TABLE LOAD:5000 KG
SPINDLE TAPER:50 SK
SPINDLE SPEEDS:3500 1/MIN.
SPINDLE MOTOR:15/18,5 (22/26 OPT) KW
FEED:1~8000 MM/MIN
RAPID SPEED:10 M/MIN
POSITIONING ACCURACY:JIS 6338;±0,005MM / 300MM VDI 3441:P0,014MM
REPEATING ACCURACY:JIS 6338:±0,003MM VDI3441:PS0,01 MM
TOTAL POWER REQUIREMENT:30 KVA
WEIGHT OF THE MACHINE CA.:11 T
DIMENSIONS OF THE MACHINE CA.: M
UNIVERSAL MILLING HEAD:MANUELL
LINEAR SCALES IN X-Y-Z AXES:VON HEIDENHAIN; MIT AUSBLASVORRICHTUNG VON
CHIP CONVEYOR:SCHNECKENAUSFüHRUNG VORNE/HINTEN
CE-DESIGN:
CNC CONTROL:SIEMENS/FANUC/HEIDENHAIN
RS232 TERMINAL INTERFACE PORT:
TOOLS:
LEVELLIG ELEMENTS:
HALOGEN LAMP:
ALARMING LAMP:
TECHNICAL DOCUMENTATION:
CE-CERTIFICATE:

TRADE TERM : F.O.B. TAIWAN PORT SHIPMENT : WITHIN 14 DAYS AFTER RECEIPT OF YOUR DOWN PAYMENT PAYMENT : 30% DOWN PAYMENT BY SWIFT TRANSFER, 70% BY IRREVOCABLE & SIGHT L/C IN OUR FAVOR PACKING : BY SEAWORTHY PACKAGE WARRANTY: 12 MONTHS VALIDITY : 60 DAYS
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-automatic vertical baling line autefa, year 1999

this baling line was made by autefa in year 1999. the line has been used to press bales from a fibrous by-product from a pulp process, and is suitable for different kinds of man-made and natural materials, including cotton, wool, straw, paper, plastic etc. the baling system consists of four parallel infeed and pre-pressing lines, two main presses with wrapping and strapping functions, a two-lane rail system to and from the presses and an automated warehouse system in two floors including a lift for product bales, stackers, labelers and conveyors. the system can bale two different materials simultaneously, as each fiber line is assigned to a different pre-press.

working description:

the material is pneumatically conveyed via an air tube to a vertical dosing system. the material is separated from the transporting airflow and collected into a chamber, which cyclically releases the accumulated material into another collection chamber below it. once the desired amount is collected to the second chamber, it is gravitationally released to a pre-pressing unit below. in the pre-pressing unit, the material is pressed into a bin, which is then transported via the rail system to the main press. the main press unit presses the bale into desired dimensions, removes the bin and wraps plastic straps and film around the bale. the bin is then transported back to pre-pressing unit and the bale to an automated warehouse via the two-lane rail system.

technical data:

manufacturer: autefa solutions
year: 1999
type: uni box 2000
capacity: 220 t/day
control plc: allen bradley
number of pre-presses: 4
number of main presses: 2
number of operators: 1  AUTOMATIC VERTICAL BALING LINE AUTEFA, YEAR 1999 THIS BALING LINE WAS MADE BY AUTEFA IN YEAR 1999. THE LINE HAS BEEN USED TO PRESS BALES FROM A FIBROUS BY-PRODUCT FROM A PULP PROCESS, AND IS SUITABLE FOR DIFFERENT KINDS OF MAN-MADE AND NATURAL MATERIALS, INCLUDING COTTON, WOOL, STRAW, PAPER, PLASTIC ETC. THE BALING SYSTEM CONSISTS OF FOUR PARALLEL INFEED AND PRE-PRESSING LINES, TWO MAIN PRESSES WITH WRAPPING AND STRAPPING FUNCTIONS, A TWO-LANE RAIL SYSTEM TO AND FROM THE PRESSES AND AN AUTOMATED WAREHOUSE SYSTEM IN TWO FLOORS INCLUDING A LIFT FOR PRODUCT BALES, STACKERS, LABELERS AND CONVEYORS. THE SYSTEM CAN BALE TWO DIFFERENT MATERIALS SIMULTANEOUSLY, AS EACH FIBER LINE IS ASSIGNED TO A DIFFERENT PRE-PRESS. WORKING DESCRIPTION: THE MATERIAL IS PNEUMATICALLY CONVEYED VIA AN AIR TUBE TO A VERTICAL DOSING SYSTEM. THE MATERIAL IS SEPARATED FROM THE TRANSPORTING AIRFLOW AND COLLECTED INTO A CHAMBER, WHICH CYCLICALLY RELEASES THE ACCUMULATED MATERIAL INTO ANOTHER COLLECTION CHAMBER BELOW IT. ONCE THE DESIRED AMOUNT IS COLLECTED TO THE SECOND CHAMBER, IT IS GRAVITATIONALLY RELEASED TO A PRE-PRESSING UNIT BELOW. IN THE PRE-PRESSING UNIT, THE MATERIAL IS PRESSED INTO A BIN, WHICH IS THEN TRANSPORTED VIA THE RAIL SYSTEM TO THE MAIN PRESS. THE MAIN PRESS UNIT PRESSES THE BALE INTO DESIRED DIMENSIONS, REMOVES THE BIN AND WRAPS PLASTIC STRAPS AND FILM AROUND THE BALE. THE BIN IS THEN TRANSPORTED BACK TO PRE-PRESSING UNIT AND THE BALE TO AN AUTOMATED WAREHOUSE VIA THE TWO-LANE RAIL SYSTEM. TECHNICAL DATA: MANUFACTURER: AUTEFA SOLUTIONS YEAR: 1999 TYPE: UNI BOX 2000 CAPACITY: 220 T/DAY CONTROL PLC: ALLEN BRADLEY NUMBER OF PRE-PRESSES: 4 NUMBER OF MAIN PRESSES: 2 NUMBER OF OPERATORS: 1
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-x-travel:2600 mm<br/>y-travel:1000 mm<br/>z-travel:950 (opt.1500) mm<br/>t-slot (width-distance-quantity):22h8x7 stk. mm<br/>table area:2700×1050 mm<br/>max. table load:5000 kg<br/>spindle taper:50 sk<br/>spindle speeds:3500 (5000 opt.) 1/min.<br/>spindle motor:15/18,5 (22/26 opt) kw<br/>feed:1~8000 mm/min<br/>rapid speed:10 m/min<br/>positioning accuracy:jis 6338;±0,005mm / 300mm vdi 3441:p0,014mm <br/>repeating accuracy:jis 6338:±0,003mm  vdi3441:ps0,01 mm <br/>total power requirement:35 kva<br/>weight of the machine ca.:15 t<br/>dimensions of the machine ca.: m<br/>universal milling head:manuell <br/>linear scales in x-y-z axes:von heidenhain; mit ausblasvorrichtung von  <br/>chip conveyor:schneckenausführung vorne/hinten <br/>ce-design: <br/>cnc control:siemens/fanuc/heidenhain <br/>rs232 terminal interface port: <br/>tools: <br/>levellig elements: <br/>halogen lamp: <br/>alarming lamp: <br/>technical documentation: <br/>ce-certificate: <br/><br/>trade term : f.o.b. taiwan port  shipment : within 14 days after receipt of your down payment payment : 30% down payment by swift transfer, 70% by irrevocable & sight l/c in our favor packing : by seaworthy package warranty:  12 months validity : 60 days X-TRAVEL:2600 MM
Y-TRAVEL:1000 MM
Z-TRAVEL:950 (OPT.1500) MM
T-SLOT (WIDTH-DISTANCE-QUANTITY):22H8X7 STK. MM
TABLE AREA:2700×1050 MM
MAX. TABLE LOAD:5000 KG
SPINDLE TAPER:50 SK
SPINDLE SPEEDS:3500 (5000 OPT.) 1/MIN.
SPINDLE MOTOR:15/18,5 (22/26 OPT) KW
FEED:1~8000 MM/MIN
RAPID SPEED:10 M/MIN
POSITIONING ACCURACY:JIS 6338;±0,005MM / 300MM VDI 3441:P0,014MM
REPEATING ACCURACY:JIS 6338:±0,003MM VDI3441:PS0,01 MM
TOTAL POWER REQUIREMENT:35 KVA
WEIGHT OF THE MACHINE CA.:15 T
DIMENSIONS OF THE MACHINE CA.: M
UNIVERSAL MILLING HEAD:MANUELL
LINEAR SCALES IN X-Y-Z AXES:VON HEIDENHAIN; MIT AUSBLASVORRICHTUNG VON
CHIP CONVEYOR:SCHNECKENAUSFüHRUNG VORNE/HINTEN
CE-DESIGN:
CNC CONTROL:SIEMENS/FANUC/HEIDENHAIN
RS232 TERMINAL INTERFACE PORT:
TOOLS:
LEVELLIG ELEMENTS:
HALOGEN LAMP:
ALARMING LAMP:
TECHNICAL DOCUMENTATION:
CE-CERTIFICATE:

TRADE TERM : F.O.B. TAIWAN PORT SHIPMENT : WITHIN 14 DAYS AFTER RECEIPT OF YOUR DOWN PAYMENT PAYMENT : 30% DOWN PAYMENT BY SWIFT TRANSFER, 70% BY IRREVOCABLE & SIGHT L/C IN OUR FAVOR PACKING : BY SEAWORTHY PACKAGE WARRANTY: 12 MONTHS VALIDITY : 60 DAYS
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-bottle washing machine mag schymanski sirio 7/10
 
the bottle washing machine is designed by german mag schymanski” and it was manufactured in year 1998. the is single ended, two washing zone machine and it is designed for 0.33 and 0.5 liter glass bottles. the bmw has sirio 7 control unit. equipment is dismantled, in fair condition and ready for immediate delivery. equipment has complete factory documentation in german language
 
technical specifications:
 
manufacturer mag schymanski (germany)
manufacturing year 1998
manufacturer type sirio 7/10 single end
serial number: 318
number of bottle rows 10
number of bottle cups 158
capacity 3 000 bph with 30 min 24 second cycle
10 000 bph with 9 min 07 second cycle
serial number 318
max bottle diameter 90 mm
max bottle height 310 mm .
voltage 400 / 240 v, 50 hz
empty weight 14300 kg
operation weight: 25600 kg  BOTTLE WASHING MACHINE MAG SCHYMANSKI SIRIO 7/10 THE BOTTLE WASHING MACHINE IS DESIGNED BY GERMAN MAG SCHYMANSKI” AND IT WAS MANUFACTURED IN YEAR 1998. THE IS SINGLE ENDED, TWO WASHING ZONE MACHINE AND IT IS DESIGNED FOR 0.33 AND 0.5 LITER GLASS BOTTLES. THE BMW HAS SIRIO 7 CONTROL UNIT. EQUIPMENT IS DISMANTLED, IN FAIR CONDITION AND READY FOR IMMEDIATE DELIVERY. EQUIPMENT HAS COMPLETE FACTORY DOCUMENTATION IN GERMAN LANGUAGE TECHNICAL SPECIFICATIONS: MANUFACTURER MAG SCHYMANSKI (GERMANY) MANUFACTURING YEAR 1998 MANUFACTURER TYPE SIRIO 7/10 SINGLE END SERIAL NUMBER: 318 NUMBER OF BOTTLE ROWS 10 NUMBER OF BOTTLE CUPS 158 CAPACITY 3 000 BPH WITH 30 MIN 24 SECOND CYCLE 10 000 BPH WITH 9 MIN 07 SECOND CYCLE SERIAL NUMBER 318 MAX BOTTLE DIAMETER 90 MM MAX BOTTLE HEIGHT 310 MM . VOLTAGE 400 / 240 V, 50 HZ EMPTY WEIGHT 14300 KG OPERATION WEIGHT: 25600 KG
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec flowwrap f80-2xl80gpn - 1 pendular knife - guiding device - new design<br><br>flowwrap machine - new design - for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. film feed from the top. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 600mm | 1 pendular knife | 220v, 3.6kw | no compressed air required | max. speed of the machine in neutral: 80 cycles/min | max. bag (not product) dimensions (mm): l(120-450)xw(50-200)xh(10-80) | machine dimensions (mm): l4380xw970xh1500 | weight (net/gross): 1160/1260kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F80-2XL80GPN - 1 PENDULAR KNIFE - GUIDING DEVICE - NEW DESIGN

FLOWWRAP MACHINE - NEW DESIGN - FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, LARGE PRODUCTS. FILM FEED FROM THE TOP. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 600MM | 1 PENDULAR KNIFE | 220V, 3.6KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 80 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(120-450)XW(50-200)XH(10-80) | MACHINE DIMENSIONS (MM): L4380XW970XH1500 | WEIGHT (NET/GROSS): 1160/1260KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-alternator abb amg 0900 - 4541 kva / 720 rpm / 60 hz - 8 new units

this alternator was designed to operate with diesel or gas engine generator at rotation speed of 720 rpm and electrical output max 4541 kva / 6.6 kv / 60 hz. there are 8 identical alternators available al brand new and identical. the alternator frame is a rigid welded structure and the sator is built of thin electric sheet laminations which are insulated on both sides with heat resistant inorganic resin. alternators have two bearings and they have brushless agitation and with special unitrol avr 1000 control system. the alternator is air cooled. all alternators are in warm store house, packed for sea transportation and in new like condition.

technical data
manufacturer: abb finland
year of manufacturing: 2010
alternator type amg 0900sk10 lse
cooling method air cooled
number of alternators 8 identical units
rated output 4541 kva / 6600 v / 60 hz
design rotation speed 720 rpm
power factor 0.85
efficiency at 100% load 96.50 %
weight of one alternator net 17750 kg  ALTERNATOR ABB AMG 0900 - 4541 KVA / 720 RPM / 60 HZ - 8 NEW UNITS THIS ALTERNATOR WAS DESIGNED TO OPERATE WITH DIESEL OR GAS ENGINE GENERATOR AT ROTATION SPEED OF 720 RPM AND ELECTRICAL OUTPUT MAX 4541 KVA / 6.6 KV / 60 HZ. THERE ARE 8 IDENTICAL ALTERNATORS AVAILABLE AL BRAND NEW AND IDENTICAL. THE ALTERNATOR FRAME IS A RIGID WELDED STRUCTURE AND THE SATOR IS BUILT OF THIN ELECTRIC SHEET LAMINATIONS WHICH ARE INSULATED ON BOTH SIDES WITH HEAT RESISTANT INORGANIC RESIN. ALTERNATORS HAVE TWO BEARINGS AND THEY HAVE BRUSHLESS AGITATION AND WITH SPECIAL UNITROL AVR 1000 CONTROL SYSTEM. THE ALTERNATOR IS AIR COOLED. ALL ALTERNATORS ARE IN WARM STORE HOUSE, PACKED FOR SEA TRANSPORTATION AND IN NEW LIKE CONDITION. TECHNICAL DATA MANUFACTURER: ABB FINLAND YEAR OF MANUFACTURING: 2010 ALTERNATOR TYPE AMG 0900SK10 LSE COOLING METHOD AIR COOLED NUMBER OF ALTERNATORS 8 IDENTICAL UNITS RATED OUTPUT 4541 KVA / 6600 V / 60 HZ DESIGN ROTATION SPEED 720 RPM POWER FACTOR 0.85 EFFICIENCY AT 100% LOAD 96.50 % WEIGHT OF ONE ALTERNATOR NET 17750 KG
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-empty bottle inspector heuft inline ebi with reflexx and spectrum units

the machine was installed in year 2007 and its currently in very good operational condition, it has been last serviced and can be demonstrated to customers. the capacity is 60 000 bph. this ebi is designed for class bottles, sizes 0.33 and 0.5 liters. it has complete heuft manuals in english

this heuft inline ebi makes the following scans:
for detecting residual material in a bottle it has both hf (high frequency) and if (infra red) detections systems. during hf scanning an electric field is generated in the base area of the container. conductive liquids in a container change this field. even a single drop of lye can be reliably detected with this hf system. the ir detection is based on the absorption of infrared radiation in a liquid. non-conductive material can be detected by a special sensor which measures the infrared radiation which has passed through.

sidewall inspection is made rotating bottle full 90 degree and it will be optically examined all around bottle in order to detect all possible contamination and damage. finishing inspection for faults and cracks on the bottle finish wide range of analysis tools for specifically identifying critical faults around the bottle opening. for this led strobes project different colored rings of light from above onto the bottle opening. their reflections are specifically analyzed with an interaction of high-resolution camera technology and high-performance image processing and filter procedures. faulty bottles are removed directly from the production flow. the inspection covers the complete sealing surface of the finish but also the sealing lip, the locking ring and the curved side finish area below it.

the ebi has optical heuft thread detection system which inspects the screw closure finish on a glass bottle completely. the system takes a picture of the complete circumference of the closure area with two separate cameras and mirror cabinets. the individual pictures of the different views are then put together and checked for faults.

this ebi is equipped with powerful heuft reflexx image processing system which is combining several camera pictures and x-ray images in real time. the heuft inline with heuft reflexx technology offers an optimal fault detection with a minimum false rejection rate. in this way standard glass bottles which contain the following foreign objects are detected with a reliability of 99.9 % and rejected.

technical data:
manufacturer: heuft gmbh, germany
year: 9/2007
type: heuft inline ebi with reflexx image processing
model: h8 bsxt b 72
capacity: 60 000 bph
reliability: 99.9 % detection complete heuft manuals in english. this unit can be sold to the market.
total operating hours 12750
total on duty hours 27500  EMPTY BOTTLE INSPECTOR HEUFT INLINE EBI WITH REFLEXX AND SPECTRUM UNITS THE MACHINE WAS INSTALLED IN YEAR 2007 AND ITS CURRENTLY IN VERY GOOD OPERATIONAL CONDITION, IT HAS BEEN LAST SERVICED AND CAN BE DEMONSTRATED TO CUSTOMERS. THE CAPACITY IS 60 000 BPH. THIS EBI IS DESIGNED FOR CLASS BOTTLES, SIZES 0.33 AND 0.5 LITERS. IT HAS COMPLETE HEUFT MANUALS IN ENGLISH THIS HEUFT INLINE EBI MAKES THE FOLLOWING SCANS: FOR DETECTING RESIDUAL MATERIAL IN A BOTTLE IT HAS BOTH HF (HIGH FREQUENCY) AND IF (INFRA RED) DETECTIONS SYSTEMS. DURING HF SCANNING AN ELECTRIC FIELD IS GENERATED IN THE BASE AREA OF THE CONTAINER. CONDUCTIVE LIQUIDS IN A CONTAINER CHANGE THIS FIELD. EVEN A SINGLE DROP OF LYE CAN BE RELIABLY DETECTED WITH THIS HF SYSTEM. THE IR DETECTION IS BASED ON THE ABSORPTION OF INFRARED RADIATION IN A LIQUID. NON-CONDUCTIVE MATERIAL CAN BE DETECTED BY A SPECIAL SENSOR WHICH MEASURES THE INFRARED RADIATION WHICH HAS PASSED THROUGH. SIDEWALL INSPECTION IS MADE ROTATING BOTTLE FULL 90 DEGREE AND IT WILL BE OPTICALLY EXAMINED ALL AROUND BOTTLE IN ORDER TO DETECT ALL POSSIBLE CONTAMINATION AND DAMAGE. FINISHING INSPECTION FOR FAULTS AND CRACKS ON THE BOTTLE FINISH WIDE RANGE OF ANALYSIS TOOLS FOR SPECIFICALLY IDENTIFYING CRITICAL FAULTS AROUND THE BOTTLE OPENING. FOR THIS LED STROBES PROJECT DIFFERENT COLORED RINGS OF LIGHT FROM ABOVE ONTO THE BOTTLE OPENING. THEIR REFLECTIONS ARE SPECIFICALLY ANALYZED WITH AN INTERACTION OF HIGH-RESOLUTION CAMERA TECHNOLOGY AND HIGH-PERFORMANCE IMAGE PROCESSING AND FILTER PROCEDURES. FAULTY BOTTLES ARE REMOVED DIRECTLY FROM THE PRODUCTION FLOW. THE INSPECTION COVERS THE COMPLETE SEALING SURFACE OF THE FINISH BUT ALSO THE SEALING LIP, THE LOCKING RING AND THE CURVED SIDE FINISH AREA BELOW IT. THE EBI HAS OPTICAL HEUFT THREAD DETECTION SYSTEM WHICH INSPECTS THE SCREW CLOSURE FINISH ON A GLASS BOTTLE COMPLETELY. THE SYSTEM TAKES A PICTURE OF THE COMPLETE CIRCUMFERENCE OF THE CLOSURE AREA WITH TWO SEPARATE CAMERAS AND MIRROR CABINETS. THE INDIVIDUAL PICTURES OF THE DIFFERENT VIEWS ARE THEN PUT TOGETHER AND CHECKED FOR FAULTS. THIS EBI IS EQUIPPED WITH POWERFUL HEUFT REFLEXX IMAGE PROCESSING SYSTEM WHICH IS COMBINING SEVERAL CAMERA PICTURES AND X-RAY IMAGES IN REAL TIME. THE HEUFT INLINE WITH HEUFT REFLEXX TECHNOLOGY OFFERS AN OPTIMAL FAULT DETECTION WITH A MINIMUM FALSE REJECTION RATE. IN THIS WAY STANDARD GLASS BOTTLES WHICH CONTAIN THE FOLLOWING FOREIGN OBJECTS ARE DETECTED WITH A RELIABILITY OF 99.9 % AND REJECTED. TECHNICAL DATA: MANUFACTURER: HEUFT GMBH, GERMANY YEAR: 9/2007 TYPE: HEUFT INLINE EBI WITH REFLEXX IMAGE PROCESSING MODEL: H8 BSXT B 72 CAPACITY: 60 000 BPH RELIABILITY: 99.9 % DETECTION COMPLETE HEUFT MANUALS IN ENGLISH. THIS UNIT CAN BE SOLD TO THE MARKET. TOTAL OPERATING HOURS 12750 TOTAL ON DUTY HOURS 27500
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-pet bottle filling line khs 15 750 - 30 000 bph

this complete beer filling line was delivered by khs in year 2005 and it is still installed and in very good condition. this line is complete from preform feeding equipment to delivery package palletizing. originally this line was designed to fill from 0.5, 1.5 to 2.0 liter pet bottles with max 6 gram / liter co2 and max + 16 c degree product temperature. in 2006 it was modified for 2.5 liter with adding a new labeler. line is available for immediate relocation

main characteristics of this line:
manufacturer: khs gmbh
operation started in: year 2006
total working hours: approx 27 000
condition: operation stopped in september 2014, installed
effective capacity: 30 000 bph in 0.5 l pet
22 000 bph in 1.5 l pet
15 750 bph in 2.0 l pet
neck standard: pco 28 mm
delivery packs 2.0 -2.5 l pet in 2 x 3 tray and shrink plastic
1.5 l pet in 3 x 3 tray and shrink plastic
1,5 l pet in 3 x 3 only shrink plastic
labeling: paper label, cold glue, front and neck
plastic label, hot glue, front
products used for: beer
control plc siemens simatic s 7 / et 200
line suitable with mixer for: carbonated and non carbonated drinks

videos of this line:

general introduction: abcs://abc.youtube.com/watch?v=r1zhabvf7bg

list of equipment
item 1: stretch blow molding machine sig blomax 14, serie iii
nominal capacity 32000 bph in 0.5 liter and 17 500 in 2.0 liter
max bottle height is 380 mm, max diameter 108 mm
serie iii is equipment with airback / air recycling system
complete preform feeding system by tanner with safety fence
riedel cooler for the blow molder equipment with r407c freon + radiator cooler

item 2: pet compressor ateliers francois 2100 nm3/h
compressor is 3-stage, intercooled ge68b, 480 rpm, 350 kw
air dryer and 40 bar galvanized air receiver 1 m3
radiator type water-air cooler for compressor cooling

item 3: khs air-conveyor system innoline ltr
automatic size adjustment- suitable for 49-108 mm diameter bottles

item 4: filler block with
rinser khs innorins pet-fr-zm 80/36
this is a mechanical rinser with a two-channel working for pre-rinsing
with water or disinfectant. final rinsing with water. 80 rinsing stations and 2880 mm rinser diamer.

filler - capper khs innofill drf pet 120 sc 10/36
the innofill drf pet is a computer-controlled, pet bottle filler that uses probes integrated into the filling tubes to determine fill levels. the filler has 120 filling nozzles and 10 capping stations for pco 28 caps. nsm magnettechnic cap feeding system.

item 5: filling control station heuft basic ba r20 with x-ray, capacity 25 000 bph

item 6: full bottle conveyor system innoline btr with automatic lubrication system

item 7: labeling machine innoket roland kh 20/5 ii, capacity 4000 - 32000 labels/h
this roland labelers has 20 bottle turrets and 2 labeling stations with 5-finger drums for label application. paper labels, cold glue system.

a feedscrew spaces the containers before they are channeled into the rotating machine
by an infeed star. hot glue is evenly distributed, thin film of glue on the gluing segments picks up labels from the stationary magazine. the individually spring loaded fingers of the gripper drum grasp the glued labels and apply them in the exact position on the containers.

item 8: laser marking system coder allmark al 882 aps

item 9: label inspector heuft basic ba r20 with x-ray

item 10: labeling machine krones contirol k-745-l17, year 2006
plastic labels, hot glue system, 2 rolls with automatic switch over
capacity 15 000 - 17 000 bph with 2.5 liter per

item 11: tray shrink packer khs tsp 35-700, year 2007
capacity up to 35 cycles per minute

item 12: tray conveyors khs innoline gtr with automatic lubrication system

item 13: label inserter metec on delivery packs

item 14: palletizer khs innopal pb 1/2 n2 capacity 27 000 bph in 1.5 liter
double line palletizer suitable for 800x1000 and 1000x1200 cm pallets
pallet magazine khs mph
carton layer inserter robot
khs ptr pallet conveyors
kuka / siemens plc controls

item 15: pallet stretch wrapper robopac helix hs 40
siemens simatic s 7 plc contols

item 16: pallet lift khs lord pac with a pallet coder  PET BOTTLE FILLING LINE KHS 15 750 - 30 000 BPH THIS COMPLETE BEER FILLING LINE WAS DELIVERED BY KHS IN YEAR 2005 AND IT IS STILL INSTALLED AND IN VERY GOOD CONDITION. THIS LINE IS COMPLETE FROM PREFORM FEEDING EQUIPMENT TO DELIVERY PACKAGE PALLETIZING. ORIGINALLY THIS LINE WAS DESIGNED TO FILL FROM 0.5, 1.5 TO 2.0 LITER PET BOTTLES WITH MAX 6 GRAM / LITER CO2 AND MAX + 16 C DEGREE PRODUCT TEMPERATURE. IN 2006 IT WAS MODIFIED FOR 2.5 LITER WITH ADDING A NEW LABELER. LINE IS AVAILABLE FOR IMMEDIATE RELOCATION MAIN CHARACTERISTICS OF THIS LINE: MANUFACTURER: KHS GMBH OPERATION STARTED IN: YEAR 2006 TOTAL WORKING HOURS: APPROX 27 000 CONDITION: OPERATION STOPPED IN SEPTEMBER 2014, INSTALLED EFFECTIVE CAPACITY: 30 000 BPH IN 0.5 L PET 22 000 BPH IN 1.5 L PET 15 750 BPH IN 2.0 L PET NECK STANDARD: PCO 28 MM DELIVERY PACKS 2.0 -2.5 L PET IN 2 X 3 TRAY AND SHRINK PLASTIC 1.5 L PET IN 3 X 3 TRAY AND SHRINK PLASTIC 1,5 L PET IN 3 X 3 ONLY SHRINK PLASTIC LABELING: PAPER LABEL, COLD GLUE, FRONT AND NECK PLASTIC LABEL, HOT GLUE, FRONT PRODUCTS USED FOR: BEER CONTROL PLC SIEMENS SIMATIC S 7 / ET 200 LINE SUITABLE WITH MIXER FOR: CARBONATED AND NON CARBONATED DRINKS VIDEOS OF THIS LINE: GENERAL INTRODUCTION: ABCS://ABC.YOUTUBE.COM/WATCH?V=R1ZHABVF7BG LIST OF EQUIPMENT ITEM 1: STRETCH BLOW MOLDING MACHINE SIG BLOMAX 14, SERIE III NOMINAL CAPACITY 32000 BPH IN 0.5 LITER AND 17 500 IN 2.0 LITER MAX BOTTLE HEIGHT IS 380 MM, MAX DIAMETER 108 MM SERIE III IS EQUIPMENT WITH AIRBACK / AIR RECYCLING SYSTEM COMPLETE PREFORM FEEDING SYSTEM BY TANNER WITH SAFETY FENCE RIEDEL COOLER FOR THE BLOW MOLDER EQUIPMENT WITH R407C FREON + RADIATOR COOLER ITEM 2: PET COMPRESSOR ATELIERS FRANCOIS 2100 NM3/H COMPRESSOR IS 3-STAGE, INTERCOOLED GE68B, 480 RPM, 350 KW AIR DRYER AND 40 BAR GALVANIZED AIR RECEIVER 1 M3 RADIATOR TYPE WATER-AIR COOLER FOR COMPRESSOR COOLING ITEM 3: KHS AIR-CONVEYOR SYSTEM INNOLINE LTR AUTOMATIC SIZE ADJUSTMENT- SUITABLE FOR 49-108 MM DIAMETER BOTTLES ITEM 4: FILLER BLOCK WITH RINSER KHS INNORINS PET-FR-ZM 80/36 THIS IS A MECHANICAL RINSER WITH A TWO-CHANNEL WORKING FOR PRE-RINSING WITH WATER OR DISINFECTANT. FINAL RINSING WITH WATER. 80 RINSING STATIONS AND 2880 MM RINSER DIAMER. FILLER - CAPPER KHS INNOFILL DRF PET 120 SC 10/36 THE INNOFILL DRF PET IS A COMPUTER-CONTROLLED, PET BOTTLE FILLER THAT USES PROBES INTEGRATED INTO THE FILLING TUBES TO DETERMINE FILL LEVELS. THE FILLER HAS 120 FILLING NOZZLES AND 10 CAPPING STATIONS FOR PCO 28 CAPS. NSM MAGNETTECHNIC CAP FEEDING SYSTEM. ITEM 5: FILLING CONTROL STATION HEUFT BASIC BA R20 WITH X-RAY, CAPACITY 25 000 BPH ITEM 6: FULL BOTTLE CONVEYOR SYSTEM INNOLINE BTR WITH AUTOMATIC LUBRICATION SYSTEM ITEM 7: LABELING MACHINE INNOKET ROLAND KH 20/5 II, CAPACITY 4000 - 32000 LABELS/H THIS ROLAND LABELERS HAS 20 BOTTLE TURRETS AND 2 LABELING STATIONS WITH 5-FINGER DRUMS FOR LABEL APPLICATION. PAPER LABELS, COLD GLUE SYSTEM. A FEEDSCREW SPACES THE CONTAINERS BEFORE THEY ARE CHANNELED INTO THE ROTATING MACHINE BY AN INFEED STAR. HOT GLUE IS EVENLY DISTRIBUTED, THIN FILM OF GLUE ON THE GLUING SEGMENTS PICKS UP LABELS FROM THE STATIONARY MAGAZINE. THE INDIVIDUALLY SPRING LOADED FINGERS OF THE GRIPPER DRUM GRASP THE GLUED LABELS AND APPLY THEM IN THE EXACT POSITION ON THE CONTAINERS. ITEM 8: LASER MARKING SYSTEM CODER ALLMARK AL 882 APS ITEM 9: LABEL INSPECTOR HEUFT BASIC BA R20 WITH X-RAY ITEM 10: LABELING MACHINE KRONES CONTIROL K-745-L17, YEAR 2006 PLASTIC LABELS, HOT GLUE SYSTEM, 2 ROLLS WITH AUTOMATIC SWITCH OVER CAPACITY 15 000 - 17 000 BPH WITH 2.5 LITER PER ITEM 11: TRAY SHRINK PACKER KHS TSP 35-700, YEAR 2007 CAPACITY UP TO 35 CYCLES PER MINUTE ITEM 12: TRAY CONVEYORS KHS INNOLINE GTR WITH AUTOMATIC LUBRICATION SYSTEM ITEM 13: LABEL INSERTER METEC ON DELIVERY PACKS ITEM 14: PALLETIZER KHS INNOPAL PB 1/2 N2 CAPACITY 27 000 BPH IN 1.5 LITER DOUBLE LINE PALLETIZER SUITABLE FOR 800X1000 AND 1000X1200 CM PALLETS PALLET MAGAZINE KHS MPH CARTON LAYER INSERTER ROBOT KHS PTR PALLET CONVEYORS KUKA / SIEMENS PLC CONTROLS ITEM 15: PALLET STRETCH WRAPPER ROBOPAC HELIX HS 40 SIEMENS SIMATIC S 7 PLC CONTOLS ITEM 16: PALLET LIFT KHS LORD PAC WITH A PALLET CODER
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-glass bottle filling machine khs innofill dmg / svf 120/16, 50 000 bph
 
khs innofill dmg is a mechanically controlled glass bottle filler has 120 filling head filler and a cap closing station with 16 heads. this unit has been filling beer in 0.33 and 0.5 liter glass bottles with crown corks, capacity 50 000 bph. filling level is determined by return gas tubes. this filler machine is designed to bottle beer, soft drinks, as well as non-carbonated beverages in glass bottles. all processing sequences of the innofill dmg are mechanically controlled for easy handling and operating. the machine is in good condition, still installed and powered but the production was stopped in year 2013
 
technical information:
 
machine type: khs innofill dmg / svf 120/16
serial number: 47527
manufacturing year: 2005
capacity: 50 000 bph in 0.5 liter bottles
bottle volumes: 0.1 l - 1.5 l
filling temperatures: 4 - 16 °c
bottle heights: 130 - 360 mm
bottle diameters: 40 - 100 mm  GLASS BOTTLE FILLING MACHINE KHS INNOFILL DMG / SVF 120/16, 50 000 BPH KHS INNOFILL DMG IS A MECHANICALLY CONTROLLED GLASS BOTTLE FILLER HAS 120 FILLING HEAD FILLER AND A CAP CLOSING STATION WITH 16 HEADS. THIS UNIT HAS BEEN FILLING BEER IN 0.33 AND 0.5 LITER GLASS BOTTLES WITH CROWN CORKS, CAPACITY 50 000 BPH. FILLING LEVEL IS DETERMINED BY RETURN GAS TUBES. THIS FILLER MACHINE IS DESIGNED TO BOTTLE BEER, SOFT DRINKS, AS WELL AS NON-CARBONATED BEVERAGES IN GLASS BOTTLES. ALL PROCESSING SEQUENCES OF THE INNOFILL DMG ARE MECHANICALLY CONTROLLED FOR EASY HANDLING AND OPERATING. THE MACHINE IS IN GOOD CONDITION, STILL INSTALLED AND POWERED BUT THE PRODUCTION WAS STOPPED IN YEAR 2013 TECHNICAL INFORMATION: MACHINE TYPE: KHS INNOFILL DMG / SVF 120/16 SERIAL NUMBER: 47527 MANUFACTURING YEAR: 2005 CAPACITY: 50 000 BPH IN 0.5 LITER BOTTLES BOTTLE VOLUMES: 0.1 L - 1.5 L FILLING TEMPERATURES: 4 - 16 °C BOTTLE HEIGHTS: 130 - 360 MM BOTTLE DIAMETERS: 40 - 100 MM
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-this inline heuft ebi was made in year 2007 and relocated in 2011. today it is still installed but not in use nor connected to the power. this ebi is designed for class bottles, sizes 0.33 and 0.5 liters. the capacity of this inline ebi is min 50 000 bph and equipment is in very good condition.

this heuft inline ebi makes the following scans:
for detecting residual material in a bottle it has both hf (high frequency) and if (infra red) detections systems. during hf scanning an electric field is generated in the base area of the container. conductive liquids in a container change this field. even a single drop of lye can be reliably detected with this hf system. the ir detection is based on the absorption of infrared radiation in a liquid. non-conductive material can be detected by a special sensor which measures the infrared radiation which has passed through.

sidewall inspection is made rotating bottle full 90 degree and it will be optically examined all around bottle in order to detect all possible contamination and damage. finishing inspection for faults and cracks on the bottle finish wide range of analysis tools for specifically identifying critical faults around the bottle opening. for this led strobes project different colored rings of light from above onto the bottle opening. their reflections are specifically analyzed with an interaction of high-resolution camera technology and high-performance image processing and filter procedures. faulty bottles are removed directly from the production flow. the inspection covers the complete sealing surface of the finish but also the sealing lip, the locking ring and the curved side finish area below it.

the ebi has optical heuft thread detection system which inspects the screw closure finish on aglass bottle completely. the system takes a picture of the complete circumference of the closure area with two separate cameras and mirror cabinets. the individual pictures of the different views are then put together and checked for faults.

this ebi is equipped with powerful heuft reflexx image processing system which is combining several camera pictures and x-ray images in real time. the heuft inline with heuft reflexx technology offers an optimal fault detection with a minimum false rejection rate. in this way standard glass bottles which contain the following foreign objects are detected with a reliability of 99.9 % and rejected.

technical data:
manufacturer: heuft gmbh, germany
year: 2007
type: heuft inline ebi with reflexx image processing
capacity: up to 70 000 bph
reliability: 99.9 % detection  THIS INLINE HEUFT EBI WAS MADE IN YEAR 2007 AND RELOCATED IN 2011. TODAY IT IS STILL INSTALLED BUT NOT IN USE NOR CONNECTED TO THE POWER. THIS EBI IS DESIGNED FOR CLASS BOTTLES, SIZES 0.33 AND 0.5 LITERS. THE CAPACITY OF THIS INLINE EBI IS MIN 50 000 BPH AND EQUIPMENT IS IN VERY GOOD CONDITION. THIS HEUFT INLINE EBI MAKES THE FOLLOWING SCANS: FOR DETECTING RESIDUAL MATERIAL IN A BOTTLE IT HAS BOTH HF (HIGH FREQUENCY) AND IF (INFRA RED) DETECTIONS SYSTEMS. DURING HF SCANNING AN ELECTRIC FIELD IS GENERATED IN THE BASE AREA OF THE CONTAINER. CONDUCTIVE LIQUIDS IN A CONTAINER CHANGE THIS FIELD. EVEN A SINGLE DROP OF LYE CAN BE RELIABLY DETECTED WITH THIS HF SYSTEM. THE IR DETECTION IS BASED ON THE ABSORPTION OF INFRARED RADIATION IN A LIQUID. NON-CONDUCTIVE MATERIAL CAN BE DETECTED BY A SPECIAL SENSOR WHICH MEASURES THE INFRARED RADIATION WHICH HAS PASSED THROUGH. SIDEWALL INSPECTION IS MADE ROTATING BOTTLE FULL 90 DEGREE AND IT WILL BE OPTICALLY EXAMINED ALL AROUND BOTTLE IN ORDER TO DETECT ALL POSSIBLE CONTAMINATION AND DAMAGE. FINISHING INSPECTION FOR FAULTS AND CRACKS ON THE BOTTLE FINISH WIDE RANGE OF ANALYSIS TOOLS FOR SPECIFICALLY IDENTIFYING CRITICAL FAULTS AROUND THE BOTTLE OPENING. FOR THIS LED STROBES PROJECT DIFFERENT COLORED RINGS OF LIGHT FROM ABOVE ONTO THE BOTTLE OPENING. THEIR REFLECTIONS ARE SPECIFICALLY ANALYZED WITH AN INTERACTION OF HIGH-RESOLUTION CAMERA TECHNOLOGY AND HIGH-PERFORMANCE IMAGE PROCESSING AND FILTER PROCEDURES. FAULTY BOTTLES ARE REMOVED DIRECTLY FROM THE PRODUCTION FLOW. THE INSPECTION COVERS THE COMPLETE SEALING SURFACE OF THE FINISH BUT ALSO THE SEALING LIP, THE LOCKING RING AND THE CURVED SIDE FINISH AREA BELOW IT. THE EBI HAS OPTICAL HEUFT THREAD DETECTION SYSTEM WHICH INSPECTS THE SCREW CLOSURE FINISH ON AGLASS BOTTLE COMPLETELY. THE SYSTEM TAKES A PICTURE OF THE COMPLETE CIRCUMFERENCE OF THE CLOSURE AREA WITH TWO SEPARATE CAMERAS AND MIRROR CABINETS. THE INDIVIDUAL PICTURES OF THE DIFFERENT VIEWS ARE THEN PUT TOGETHER AND CHECKED FOR FAULTS. THIS EBI IS EQUIPPED WITH POWERFUL HEUFT REFLEXX IMAGE PROCESSING SYSTEM WHICH IS COMBINING SEVERAL CAMERA PICTURES AND X-RAY IMAGES IN REAL TIME. THE HEUFT INLINE WITH HEUFT REFLEXX TECHNOLOGY OFFERS AN OPTIMAL FAULT DETECTION WITH A MINIMUM FALSE REJECTION RATE. IN THIS WAY STANDARD GLASS BOTTLES WHICH CONTAIN THE FOLLOWING FOREIGN OBJECTS ARE DETECTED WITH A RELIABILITY OF 99.9 % AND REJECTED. TECHNICAL DATA: MANUFACTURER: HEUFT GMBH, GERMANY YEAR: 2007 TYPE: HEUFT INLINE EBI WITH REFLEXX IMAGE PROCESSING CAPACITY: UP TO 70 000 BPH RELIABILITY: 99.9 % DETECTION
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-liquid chiller gea grasso fx 2800 / s - 2 x 2800 kw

two gea grasso fx pv 2800 s - screw type liquid chiller compressors were installed in 2003 (made in 2002) and they still installed and in very good working condition. the compressors have flooded evaporation, plate type evaporator and evaporative condenser cooler. type they have been operated only 15 000 hours, their cooling capacity is 2800 kw/unit. refrigerant is r717 (nh3)

the delivery includes complete system with compressor package, evaporators, pumps, intermediate nh3 tanks, evaporative condenser and control cabinets.

the screw compressor sucks nh3 gas out of the liquid separator and compresses it up to condensation pressure. the refrigerant turns to liquid as it is cooled in the condenser. the liquid nh3 is injected back to the liquid separator via a high pressure float valve as expansion device. inside the liquid separator liquid form and gas for are separated. the liquid nh3 passes in a gravity driven circuit to the evaporator. during the evaporation into gaseous form (with heat energy delivered by the secondary refrigerant) it evaporates and a mixture of gas and liquid is coming back to the liquid separator. oil is injected into the working chamber of the screw compressor during operation and it is then separated again from the refrigerant in the discharge side oil separator. the oil which has heated up in the compressor is cooled in an oil cooler to reach the entry temperature and passes a fine filter.

this liquid chillers is equipped with a freely programmable standard logic controller plc simatic c7-633. all operating and fault signals as well as the process variables can be read from a lcd display with background lighting. the display is operated via a robust foil keyboard having 6 functions and 24 system keys.

technical data:

manufacturer: gea grasso gmbh
manufacturing year: 2002
number of units: 2 complete units
type: grasso fx vp 2008 / s
cooling capacity: 2800 kw / unit
electric motor: schorch 560 kw / 2988 rpm / 50 hz
refrigerant: r 717 (ammonia)
evaporator: alfa-laval m20-mwfrc
evaporative condenser: bac xx
compressor package ew: 13250 kg  LIQUID CHILLER GEA GRASSO FX 2800 / S - 2 X 2800 KW TWO GEA GRASSO FX PV 2800 S - SCREW TYPE LIQUID CHILLER COMPRESSORS WERE INSTALLED IN 2003 (MADE IN 2002) AND THEY STILL INSTALLED AND IN VERY GOOD WORKING CONDITION. THE COMPRESSORS HAVE FLOODED EVAPORATION, PLATE TYPE EVAPORATOR AND EVAPORATIVE CONDENSER COOLER. TYPE THEY HAVE BEEN OPERATED ONLY 15 000 HOURS, THEIR COOLING CAPACITY IS 2800 KW/UNIT. REFRIGERANT IS R717 (NH3) THE DELIVERY INCLUDES COMPLETE SYSTEM WITH COMPRESSOR PACKAGE, EVAPORATORS, PUMPS, INTERMEDIATE NH3 TANKS, EVAPORATIVE CONDENSER AND CONTROL CABINETS. THE SCREW COMPRESSOR SUCKS NH3 GAS OUT OF THE LIQUID SEPARATOR AND COMPRESSES IT UP TO CONDENSATION PRESSURE. THE REFRIGERANT TURNS TO LIQUID AS IT IS COOLED IN THE CONDENSER. THE LIQUID NH3 IS INJECTED BACK TO THE LIQUID SEPARATOR VIA A HIGH PRESSURE FLOAT VALVE AS EXPANSION DEVICE. INSIDE THE LIQUID SEPARATOR LIQUID FORM AND GAS FOR ARE SEPARATED. THE LIQUID NH3 PASSES IN A GRAVITY DRIVEN CIRCUIT TO THE EVAPORATOR. DURING THE EVAPORATION INTO GASEOUS FORM (WITH HEAT ENERGY DELIVERED BY THE SECONDARY REFRIGERANT) IT EVAPORATES AND A MIXTURE OF GAS AND LIQUID IS COMING BACK TO THE LIQUID SEPARATOR. OIL IS INJECTED INTO THE WORKING CHAMBER OF THE SCREW COMPRESSOR DURING OPERATION AND IT IS THEN SEPARATED AGAIN FROM THE REFRIGERANT IN THE DISCHARGE SIDE OIL SEPARATOR. THE OIL WHICH HAS HEATED UP IN THE COMPRESSOR IS COOLED IN AN OIL COOLER TO REACH THE ENTRY TEMPERATURE AND PASSES A FINE FILTER. THIS LIQUID CHILLERS IS EQUIPPED WITH A FREELY PROGRAMMABLE STANDARD LOGIC CONTROLLER PLC SIMATIC C7-633. ALL OPERATING AND FAULT SIGNALS AS WELL AS THE PROCESS VARIABLES CAN BE READ FROM A LCD DISPLAY WITH BACKGROUND LIGHTING. THE DISPLAY IS OPERATED VIA A ROBUST FOIL KEYBOARD HAVING 6 FUNCTIONS AND 24 SYSTEM KEYS. TECHNICAL DATA: MANUFACTURER: GEA GRASSO GMBH MANUFACTURING YEAR: 2002 NUMBER OF UNITS: 2 COMPLETE UNITS TYPE: GRASSO FX VP 2008 / S COOLING CAPACITY: 2800 KW / UNIT ELECTRIC MOTOR: SCHORCH 560 KW / 2988 RPM / 50 HZ REFRIGERANT: R 717 (AMMONIA) EVAPORATOR: ALFA-LAVAL M20-MWFRC EVAPORATIVE CONDENSER: BAC XX COMPRESSOR PACKAGE EW: 13250 KG
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-drum and container filling line, semiautomatic 2006
 
the line is designed for filling both 1000 liter ibc’s and normal 209 liter drums / barrels. it consist of straight chain driven heavy duty roller conveyor which is carrying ibc’s or a standard pallet loaded with four drums / barrels through the filling process and conveying them for further storing. the filling machine is semiautomatic coarse-and-fine filling station; first is programmable volumetric and then fine filling with integrated weighing system. cap closing / bunging and sealing will be made manually but a machine aided. the station operation is controlled by siemens s7c programmable logic.
 
the line is manufactured in 2006 by finnish company insinööritoimisto jyrki kekälainen” who is specialized supplying automation solutions filling and packing applications. today the line is dismantled and stores in our warehouse.
 
operation description:
 
the operator lifts the empty containers on the conveyor (open the cap of container), the container will move into filling machine and it will be filled automatically with 2 DRUM AND CONTAINER FILLING LINE, SEMIAUTOMATIC 2006 THE LINE IS DESIGNED FOR FILLING BOTH 1000 LITER IBC’S AND NORMAL 209 LITER DRUMS / BARRELS. IT CONSIST OF STRAIGHT CHAIN DRIVEN HEAVY DUTY ROLLER CONVEYOR WHICH IS CARRYING IBC’S OR A STANDARD PALLET LOADED WITH FOUR DRUMS / BARRELS THROUGH THE FILLING PROCESS AND CONVEYING THEM FOR FURTHER STORING. THE FILLING MACHINE IS SEMIAUTOMATIC COARSE-AND-FINE FILLING STATION; FIRST IS PROGRAMMABLE VOLUMETRIC AND THEN FINE FILLING WITH INTEGRATED WEIGHING SYSTEM. CAP CLOSING / BUNGING AND SEALING WILL BE MADE MANUALLY BUT A MACHINE AIDED. THE STATION OPERATION IS CONTROLLED BY SIEMENS S7C PROGRAMMABLE LOGIC. THE LINE IS MANUFACTURED IN 2006 BY FINNISH COMPANY INSINööRITOIMISTO JYRKI KEKäLAINEN” WHO IS SPECIALIZED SUPPLYING AUTOMATION SOLUTIONS FILLING AND PACKING APPLICATIONS. TODAY THE LINE IS DISMANTLED AND STORES IN OUR WAREHOUSE. OPERATION DESCRIPTION: THE OPERATOR LIFTS THE EMPTY CONTAINERS ON THE CONVEYOR (OPEN THE CAP OF CONTAINER), THE CONTAINER WILL MOVE INTO FILLING MACHINE AND IT WILL BE FILLED AUTOMATICALLY WITH 2 "AND 1 / 2" VALVES, COARSE-AND FINE-FILLING. AFTER FILLING THE CONTAINER WILL MOVE OUT OF THE MACHINE AND THE OPERATOR WILL FIX THE LABEL AND CLOSE THE CAP. AFTER THE FILLING STATION THERE IS ~16 M LONG PUFFER CONVEYOR FOR THE FILLED IBC`S, WHERE A FORK LIFT WILL PICK UP THE IBC`S IN DRUM FILLING THE OPERATOR LIFTS THE EMPTY DRUMS ON PALLET (OPEN THE CAPS). THEN HE LIFTS THE PALLET ON THE CONVEYOR. IN THE MACHINE THERE IS AN EXTRA FILLING LENCE FOR THE DRUMS. THE DRUMS ARE FILLED ON THE WEIGHING SYSTEM OF THE MACHINE WHICH IS CONTROLLING THE FILLING OF EACH BARREL. AFTER THE DRUM IS FILLED THE OPERATOR MOVE THE LENCE INTO SECOND DRUM AND MACHINE START TO FILL IT. AFTER ALL DRUMS ARE FILLED THE PALLET WILL MOVE OUT OF MACHINE AND THE OPERATOR WILL CLOSE THE CAPS AND FIX THE SEALS AND LABELS. TECHNICAL DATA: MANUFACTURED IN: 2006 SUITABLE FOR: STANDARD IBC AND DRUMS MAX FILLING WEIGH: 1500 KG FILLING ACCURACY: 0.5 KG FILLING CAPACITY: 7 IBC/HOUR OR 35 DRUMS (209 LITERS) / HOUR ROLLER CONVEYOR TYPE: CHAIN DRIVEN, GALVANIZED ROLLER CONVEYOR LENGTH: APPROX 16 METERS ROLL DIAMETER: 80 MM
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-<b>telescopic conveyor discharge charge telescopes telescopic belt conveyors - extendable conveyor</b> <b>properties:</b>

used telescopic belt conveyor
condition: fully functional with traces of use
ideal for fast material handling
expertly disassembled and packed
color: grey
incl. feet
incl. control cabinet
4 stk. in stock
price per piece

<b>telescopic belt conveyor</b>

the telescopic belt conveyor is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. transportation of telescopic belt conveyors can promote sensitive and different-sized containers, boxes or other packaging and article units to the task or place of delivery and, for example, also serves as a connecting route before or between production and machinery. also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances.

<b>technical data:</b>

length retracted: 5,080 mm
length extended: 11,650 mm
overall width incl. control cabinet: 1,250 mm
overall width without control cabinet: 930 mm
belt width: 600 mm
strap type: smooth

<b>tailor-made solutions for your intralogistics</b>

we are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! gladly we will create you an individual offer or advise on the design or assembly questions. just let your needs and local conditions us to.

take advantage of our many years of experience and our excellent network of professionals. for companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.

together, we will work out ways to optimize your process and material flow cost effectively and sustainably. we can offer you even fully automatic sorting equipment or additional components such as picking racks or containers.

<B>TELESCOPIC CONVEYOR DISCHARGE CHARGE TELESCOPES TELESCOPIC BELT CONVEYORS - EXTENDABLE CONVEYOR</B> <B>PROPERTIES:</B> USED TELESCOPIC BELT CONVEYOR CONDITION: FULLY FUNCTIONAL WITH TRACES OF USE IDEAL FOR FAST MATERIAL HANDLING EXPERTLY DISASSEMBLED AND PACKED COLOR: GREY INCL. FEET INCL. CONTROL CABINET 4 STK. IN STOCK PRICE PER PIECE <B>TELESCOPIC BELT CONVEYOR</B> THE TELESCOPIC BELT CONVEYOR IS IDEAL TO DOVETAIL MACHINES OR JOBS IN THE PICKING ZONE AND TO OPTIMIZE THE INTERNAL PROCESS. TRANSPORTATION OF TELESCOPIC BELT CONVEYORS CAN PROMOTE SENSITIVE AND DIFFERENT-SIZED CONTAINERS, BOXES OR OTHER PACKAGING AND ARTICLE UNITS TO THE TASK OR PLACE OF DELIVERY AND, FOR EXAMPLE, ALSO SERVES AS A CONNECTING ROUTE BEFORE OR BETWEEN PRODUCTION AND MACHINERY. ALSO ENABLES EFFICIENT PARTS IN OPERATING AND STORAGE AND IS DESIGNED TO PROMOTE SIGNIFICANT FLOW RATES AND DISTANCES. <B>TECHNICAL DATA:</B> LENGTH RETRACTED: 5,080 MM LENGTH EXTENDED: 11,650 MM OVERALL WIDTH INCL. CONTROL CABINET: 1,250 MM OVERALL WIDTH WITHOUT CONTROL CABINET: 930 MM BELT WIDTH: 600 MM STRAP TYPE: SMOOTH <B>TAILOR-MADE SOLUTIONS FOR YOUR INTRALOGISTICS</B> WE ARE YOUR COMPETENT PARTNER FOR ROLLER CONVEYORS, BELT LIFTS, INCLINED CONVEYORS OR TELESCOPES TO THE LOADING AND UNLOADING OF GOODS! GLADLY WE WILL CREATE YOU AN INDIVIDUAL OFFER OR ADVISE ON THE DESIGN OR ASSEMBLY QUESTIONS. JUST LET YOUR NEEDS AND LOCAL CONDITIONS US TO. TAKE ADVANTAGE OF OUR MANY YEARS OF EXPERIENCE AND OUR EXCELLENT NETWORK OF PROFESSIONALS. FOR COMPANIES OF VARIOUS INDUSTRIES, SUCH AS: LOGISTICS, PHARMACEUTICAL INDUSTRY, CRAFTS OR THE ELECTRONICS INDUSTRY WE HAVE ALREADY SUCCESSFULLY IMPLEMENTED PROJECTS. TOGETHER, WE WILL WORK OUT WAYS TO OPTIMIZE YOUR PROCESS AND MATERIAL FLOW COST EFFECTIVELY AND SUSTAINABLY. WE CAN OFFER YOU EVEN FULLY AUTOMATIC SORTING EQUIPMENT OR ADDITIONAL COMPONENTS SUCH AS PICKING RACKS OR CONTAINERS.
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Ubicación: Land-sulfuric acid plant (sulphuric acid) 1500 mt, 50 hz, new surplus
1500 mt sulphuric acid plant, double absorption. new surplus,  50 hz, all the equipment is new and was never installed or unpacked from shipping crates. the european designed plant is stored in a secure climate controlled warehouse and is being kept as per manufactures guidelines.
the process technology licence associated with the plant has never been used and can be transferred to the new owner.the guarantee on the plant can be provided to the new owner once the basic engineering of adapting the plant to the new site conditions have been completed.  the new owner of the plant will not have any restrictions on the engineering company they choose to complete the design, construction and commissioning of this plant.
        SULFURIC ACID PLANT (SULPHURIC ACID) 1500 MT, 50 HZ, NEW SURPLUS 1500 MT SULPHURIC ACID PLANT, DOUBLE ABSORPTION. NEW SURPLUS, 50 HZ, ALL THE EQUIPMENT IS NEW AND WAS NEVER INSTALLED OR UNPACKED FROM SHIPPING CRATES. THE EUROPEAN DESIGNED PLANT IS STORED IN A SECURE CLIMATE CONTROLLED WAREHOUSE AND IS BEING KEPT AS PER MANUFACTURES GUIDELINES. THE PROCESS TECHNOLOGY LICENCE ASSOCIATED WITH THE PLANT HAS NEVER BEEN USED AND CAN BE TRANSFERRED TO THE NEW OWNER.THE GUARANTEE ON THE PLANT CAN BE PROVIDED TO THE NEW OWNER ONCE THE BASIC ENGINEERING OF ADAPTING THE PLANT TO THE NEW SITE CONDITIONS HAVE BEEN COMPLETED. THE NEW OWNER OF THE PLANT WILL NOT HAVE ANY RESTRICTIONS ON THE ENGINEERING COMPANY THEY CHOOSE TO COMPLETE THE DESIGN, CONSTRUCTION AND COMMISSIONING OF THIS PLANT.
Vendedor: Brown Energy Group Inc
Año de construcción: usado
Ubicación: Land-strip width 40 - 280 mm
strip thickness 0,80 - 4,00 mm
round tubes: tube diameter 16,0 - 88,9 mm
square tubes 15 x 15 - 70 mm x 70 mm
rectangular tubes 35 x 15 - 85 x 35 mm
wall thickness 0,80 - 4,00 mm
tensile strength max. 480 n /mm²
production speed max. 150 m / min.
working direction right - left
the line consists of:
strip preparation plant
strip accumulator
profiling machine
hf-welding machine, manufacturer thermatool 350 kw
calibration unit
saw
operating tools
emulsion plant
packaging equipment, manufacturer mar
power strapping machine, manufacturer signode model m 22
weld seam tester, manufacturer prÜftechnik
model eddycheck lab 2
weighing station
electric
voltage 3 x 400 v ± 10%, 50 hz ± 2%
control voltage 24 v dc
solenoid valve voltage 24 v dc
pneumatic
hydraulic
  STRIP WIDTH 40 - 280 MM STRIP THICKNESS 0,80 - 4,00 MM ROUND TUBES: TUBE DIAMETER 16,0 - 88,9 MM SQUARE TUBES 15 X 15 - 70 MM X 70 MM RECTANGULAR TUBES 35 X 15 - 85 X 35 MM WALL THICKNESS 0,80 - 4,00 MM TENSILE STRENGTH MAX. 480 N /MM² PRODUCTION SPEED MAX. 150 M / MIN. WORKING DIRECTION RIGHT - LEFT THE LINE CONSISTS OF: STRIP PREPARATION PLANT STRIP ACCUMULATOR PROFILING MACHINE HF-WELDING MACHINE, MANUFACTURER THERMATOOL 350 KW CALIBRATION UNIT SAW OPERATING TOOLS EMULSION PLANT PACKAGING EQUIPMENT, MANUFACTURER MAR POWER STRAPPING MACHINE, MANUFACTURER SIGNODE MODEL M 22 WELD SEAM TESTER, MANUFACTURER PRÜFTECHNIK MODEL EDDYCHECK LAB 2 WEIGHING STATION ELECTRIC VOLTAGE 3 X 400 V ± 10%, 50 HZ ± 2% CONTROL VOLTAGE 24 V DC SOLENOID VALVE VOLTAGE 24 V DC PNEUMATIC HYDRAULIC
Vendedor: Reinhold Schmitt GmbH
Año de construcción: usado
Ubicación: Land-technical data:

-equal water-cooled ac unit tig tr 4,.
-water-cooled mig-mag system dv - iv - xt - e. welding plant sth 400
for welding of: stainless steel, steel, aluminum, etc.
-16 x welding program be selected with: -.
setting selection: stick welding, tig - welding ac / dc, mig-mag welding
-digital volt + amp display
-welding current continuously adjustable by 10 a / 15 v to 400 a / 34 a - max welding current of 400 a max 60% ed
								315 a 100% ed
-power 400 v / 43 a / 16 kva
	-heart monitor
-welding current rise - and welding power descent setting
-back fire setting
-gas before. - current setting
-water cooled tig welding - torch 8 m, lightweight design
-e - welding cable + ground cable - water-cooled mig - mag torch â?? separate wire feed case dv - iv - xt for mig - mag welding
-4 wheels - wire feed
-intermediate package welder - wire feed case 4500 mm
-pressure reducer
-e - welding cable + ground cable - space requirement approx.      	 b 550 x h 1650 x h 1100 mm
-weight approx.					  	  350 kg		
 TECHNICAL DATA: -EQUAL WATER-COOLED AC UNIT TIG TR 4,. -WATER-COOLED MIG-MAG SYSTEM DV - IV - XT - E. WELDING PLANT STH 400 FOR WELDING OF: STAINLESS STEEL, STEEL, ALUMINUM, ETC. -16 X WELDING PROGRAM BE SELECTED WITH: -. SETTING SELECTION: STICK WELDING, TIG - WELDING AC / DC, MIG-MAG WELDING -DIGITAL VOLT + AMP DISPLAY -WELDING CURRENT CONTINUOUSLY ADJUSTABLE BY 10 A / 15 V TO 400 A / 34 A - MAX WELDING CURRENT OF 400 A MAX 60% ED 315 A 100% ED -POWER 400 V / 43 A / 16 KVA -HEART MONITOR -WELDING CURRENT RISE - AND WELDING POWER DESCENT SETTING -BACK FIRE SETTING -GAS BEFORE. - CURRENT SETTING -WATER COOLED TIG WELDING - TORCH 8 M, LIGHTWEIGHT DESIGN -E - WELDING CABLE + GROUND CABLE - WATER-COOLED MIG - MAG TORCH &ACIRC;?? SEPARATE WIRE FEED CASE DV - IV - XT FOR MIG - MAG WELDING -4 WHEELS - WIRE FEED -INTERMEDIATE PACKAGE WELDER - WIRE FEED CASE 4500 MM -PRESSURE REDUCER -E - WELDING CABLE + GROUND CABLE - SPACE REQUIREMENT APPROX. B 550 X H 1650 X H 1100 MM -WEIGHT APPROX. 350 KG
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-<b>properties</b>

used conveyor color: black
incl. 4 feet
incl. north motor
material: steel
ideal for fast material handling
expertly disassembled and packed
condition: fully operational
1 stk. in stock

<b>belt conveyors</b>

the belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and woodworking machines. also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances.

<b>technical data:

mass of the belt conveyor</b>
overall length: 9,710 mm
overall width incl. motor: 1.010 mm
overall width without motor: 700 mm
conveying height (adjustable): 730 mm

<b>information on the belt</b>
belt width: 600 mm
strap type: smooth
color: blue

<b>frame</b>
height: 180mm
material: steel <B>PROPERTIES</B> USED CONVEYOR COLOR: BLACK INCL. 4 FEET INCL. NORTH MOTOR MATERIAL: STEEL IDEAL FOR FAST MATERIAL HANDLING EXPERTLY DISASSEMBLED AND PACKED CONDITION: FULLY OPERATIONAL 1 STK. IN STOCK <B>BELT CONVEYORS</B> THE BELT IS IDEAL TO DOVETAIL MACHINES OR JOBS IN THE PICKING ZONE AND TO OPTIMIZE THE INTERNAL PROCESS. TRANSPORTATION CAN FOSTER THE BELT CONVEYOR SENSITIVE AND DIFFERENT-SIZED CONTAINERS, BOXES OR OTHER PACKAGING AND ARTICLE UNITS TO THE TASK OR DELIVERY POINT AND, FOR EXAMPLE, ALSO SERVES AS A CONNECTING ROUTE BEFORE OR BETWEEN PRODUCTION AND WOODWORKING MACHINES. ALSO ENABLES EFFICIENT PARTS IN OPERATING AND STORAGE AND IS DESIGNED TO PROMOTE SIGNIFICANT FLOW RATES AND DISTANCES. <B>TECHNICAL DATA: MASS OF THE BELT CONVEYOR</B> OVERALL LENGTH: 9,710 MM OVERALL WIDTH INCL. MOTOR: 1.010 MM OVERALL WIDTH WITHOUT MOTOR: 700 MM CONVEYING HEIGHT (ADJUSTABLE): 730 MM <B>INFORMATION ON THE BELT</B> BELT WIDTH: 600 MM STRAP TYPE: SMOOTH COLOR: BLUE <B>FRAME</B> HEIGHT: 180MM MATERIAL: STEEL
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Precio: 28.900 €
Ubicación: Land-ilapak smart demonstration machine
+ fully electronic, pc-monitored, multi axis horizontal flow wrapper
+ 3 independently controlled ac motors (inlet, seal rolls, jaws)
+ no product / no bag - product safety product except phase
+ 6 4 product programmes
+ sturdy, ergonomic, clear design
+ 2 m product feed with cleated chain and interchangeable attachments
+ 1 film reel holder with self-centering cone
+ 2 pairs of rolls, cold hot
+ 150 mm jaw centres (optional 180 mm)

special features: cross seal jaws width 320 mm *.

technical description:
shell fabric: all hot-sealable films
product dimensions:
150 mm wheelbase length: 50-260 mm width: 20-230 mm height: 90 mm roll of film:
width: up to 650 mm
outer diameter: up to 350 mm
core diameter: 76 mm

film length:
length: 100-550 mm mechanical performance:
100 cycles/minute

electr. port values:
400 v +/-5% - 3 ph / 220 v +/-5% - 3 ph

consumption:
5 kwa

engines:
3 independent ac motors with inverters

ILAPAK SMART DEMONSTRATION MACHINE + FULLY ELECTRONIC, PC-MONITORED, MULTI AXIS HORIZONTAL FLOW WRAPPER + 3 INDEPENDENTLY CONTROLLED AC MOTORS (INLET, SEAL ROLLS, JAWS) + NO PRODUCT / NO BAG - PRODUCT SAFETY PRODUCT EXCEPT PHASE + 6 4 PRODUCT PROGRAMMES + STURDY, ERGONOMIC, CLEAR DESIGN + 2 M PRODUCT FEED WITH CLEATED CHAIN AND INTERCHANGEABLE ATTACHMENTS + 1 FILM REEL HOLDER WITH SELF-CENTERING CONE + 2 PAIRS OF ROLLS, COLD HOT + 150 MM JAW CENTRES (OPTIONAL 180 MM) SPECIAL FEATURES: CROSS SEAL JAWS WIDTH 320 MM *. TECHNICAL DESCRIPTION: SHELL FABRIC: ALL HOT-SEALABLE FILMS PRODUCT DIMENSIONS: 150 MM WHEELBASE LENGTH: 50-260 MM WIDTH: 20-230 MM HEIGHT: 90 MM ROLL OF FILM: WIDTH: UP TO 650 MM OUTER DIAMETER: UP TO 350 MM CORE DIAMETER: 76 MM FILM LENGTH: LENGTH: 100-550 MM MECHANICAL PERFORMANCE: 100 CYCLES/MINUTE ELECTR. PORT VALUES: 400 V +/-5% - 3 PH / 220 V +/-5% - 3 PH CONSUMPTION: 5 KWA ENGINES: 3 INDEPENDENT AC MOTORS WITH INVERTERS
Vendedor: PCF Packing Christian Pühringer
Año de construcción: usado
Precio: 115 €
Ubicación: Land-<b>properties</b>

used pallet roller conveyor of the manufacturer of rack & roll gmbh
condition: excellent condition with light wear
color: silver
feet must be ordered separately
expertly disassembled and packed
pre-assembled on a length of 2,640 mm
including a drag reel per item
price per meter

<b>technical data

pallet roller conveyor dimensions approx.</b>
total length of an element: 2,640 mm
total width: 930 mm

<b>mass of the rollers and the frame about</b>
clamping length approx.: 835 mm
diameter approx.: 60mm
distance approx.: 150mm
material: steel, galvanised
frame: 80x40mm
brake pulley diameter: 90 mm

in stock: 140 metres

<b>pallet roller conveyor</b>

thanks to the superb craftsmanship of the pallet roller conveyor glides your material, even under high load, gently to the place of destination.

<b>tailor-made solutions for your intralogistics</b>

we are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! gladly we will create you an individual offer or advise on the design or assembly questions. just let your needs and local conditions us to.

take advantage of our many years of experience and our excellent network of professionals. for companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.

together, we will work out ways to optimize your process and material flow cost effectively and sustainably. we can offer you even fully automatic sorting equipment or additional components such as picking racks or containers. <B>PROPERTIES</B> USED PALLET ROLLER CONVEYOR OF THE MANUFACTURER OF RACK & ROLL GMBH CONDITION: EXCELLENT CONDITION WITH LIGHT WEAR COLOR: SILVER FEET MUST BE ORDERED SEPARATELY EXPERTLY DISASSEMBLED AND PACKED PRE-ASSEMBLED ON A LENGTH OF 2,640 MM INCLUDING A DRAG REEL PER ITEM PRICE PER METER <B>TECHNICAL DATA PALLET ROLLER CONVEYOR DIMENSIONS APPROX.</B> TOTAL LENGTH OF AN ELEMENT: 2,640 MM TOTAL WIDTH: 930 MM <B>MASS OF THE ROLLERS AND THE FRAME ABOUT</B> CLAMPING LENGTH APPROX.: 835 MM DIAMETER APPROX.: 60MM DISTANCE APPROX.: 150MM MATERIAL: STEEL, GALVANISED FRAME: 80X40MM BRAKE PULLEY DIAMETER: 90 MM IN STOCK: 140 METRES <B>PALLET ROLLER CONVEYOR</B> THANKS TO THE SUPERB CRAFTSMANSHIP OF THE PALLET ROLLER CONVEYOR GLIDES YOUR MATERIAL, EVEN UNDER HIGH LOAD, GENTLY TO THE PLACE OF DESTINATION. <B>TAILOR-MADE SOLUTIONS FOR YOUR INTRALOGISTICS</B> WE ARE YOUR COMPETENT PARTNER FOR ROLLER CONVEYORS, BELT LIFTS, INCLINED CONVEYORS OR TELESCOPES TO THE LOADING AND UNLOADING OF GOODS! GLADLY WE WILL CREATE YOU AN INDIVIDUAL OFFER OR ADVISE ON THE DESIGN OR ASSEMBLY QUESTIONS. JUST LET YOUR NEEDS AND LOCAL CONDITIONS US TO. TAKE ADVANTAGE OF OUR MANY YEARS OF EXPERIENCE AND OUR EXCELLENT NETWORK OF PROFESSIONALS. FOR COMPANIES OF VARIOUS INDUSTRIES, SUCH AS: LOGISTICS, PHARMACEUTICAL INDUSTRY, CRAFTS OR THE ELECTRONICS INDUSTRY WE HAVE ALREADY SUCCESSFULLY IMPLEMENTED PROJECTS. TOGETHER, WE WILL WORK OUT WAYS TO OPTIMIZE YOUR PROCESS AND MATERIAL FLOW COST EFFECTIVELY AND SUSTAINABLY. WE CAN OFFER YOU EVEN FULLY AUTOMATIC SORTING EQUIPMENT OR ADDITIONAL COMPONENTS SUCH AS PICKING RACKS OR CONTAINERS.
Vendedor: Lager-und Fördertechnik Namoni
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more SIG types: