1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Precio: 1 €
Ubicación: Land-4500 rpm , clarifier design ,discs stack centrifuge self cleaning with centripetal pump  18mc/h , for juice , wine , etc  electricalcabinet and tools included    . overhauled by seller , belt drive

ask for price    4500 RPM , CLARIFIER DESIGN ,DISCS STACK CENTRIFUGE SELF CLEANING WITH CENTRIPETAL PUMP 18MC/H , FOR JUICE , WINE , ETC ELECTRICALCABINET AND TOOLS INCLUDED . OVERHAULED BY SELLER , BELT DRIVE ASK FOR PRICE
Vendedor: RomBituLab SRL
Año de construcción: usado
Precio: 44.500 EU€
Ubicación: Land-the machine is designed to peel off and extract material for transport or storage. it is used during earthworks and construction works. THE MACHINE IS DESIGNED TO PEEL OFF AND EXTRACT MATERIAL FOR TRANSPORT OR STORAGE. IT IS USED DURING EARTHWORKS AND CONSTRUCTION WORKS.
Vendedor: Kennedy Machines
Año de construcción: usado
Precio: 1 €
Ubicación: Land-self cleaning with centripetal pump under pressure centrifuge separator , clarifier design for liquids 1.0 p to 1.2 density  15mc/hour ss316 in very good conditions , 5000rpm , tools available   and electrical cabinet included    belt drive  SELF CLEANING WITH CENTRIPETAL PUMP UNDER PRESSURE CENTRIFUGE SEPARATOR , CLARIFIER DESIGN FOR LIQUIDS 1.0 P TO 1.2 DENSITY 15MC/HOUR SS316 IN VERY GOOD CONDITIONS , 5000RPM , TOOLS AVAILABLE AND ELECTRICAL CABINET INCLUDED BELT DRIVE
Vendedor: RomBituLab SRL
Año de construcción: usado
Ubicación: Land-type jb 260, working width 256 mm, \r\n2 speeds, cap. max. 50 + 42 strokes/min.\r\naccessories: wire cut (1 design), 4 rows,\r\ninput by a chain for plates 256 x 625 mm TYPE JB 260, WORKING WIDTH 256 MM, \R\N2 SPEEDS, CAP. MAX. 50 + 42 STROKES/MIN.\R\NACCESSORIES: WIRE CUT (1 DESIGN), 4 ROWS,\R\NINPUT BY A CHAIN FOR PLATES 256 X 625 MM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-5 hl quantities 6 hl tank capacity steam jacket heating in the lauter tun and mash tank in addition electric heating for operation of the mash tank with 400v 32amp / 20kw heating elements (heating coil can be removed)
agitator in the mash tank e.g. for syrup making iced tea, etc.
hack work from marc function whirpoolfunktion sight glass in the pipes
lauter sight glass cip system ring nozzle anschwã¤nzen water
8cm mineral wool insulation steel sheet 3 mm inner tank
steel sheet 2 mm panel lasergeschnittenen lautering plate (removable)
marc lech to the off grains manholes with sight glass 2 x 0, 7kw agitator motors
adjustable kallotenfuss working platform between two tanks
plate cooler cooler spice 6 m 2 wort aeration eckrohrsieb(hopfensieb)
seasoning 2 x 5 m milk pipe dn 50 hose pump
stainless steel 304 l
 5 HL QUANTITIES 6 HL TANK CAPACITY STEAM JACKET HEATING IN THE LAUTER TUN AND MASH TANK IN ADDITION ELECTRIC HEATING FOR OPERATION OF THE MASH TANK WITH 400V 32AMP / 20KW HEATING ELEMENTS (HEATING COIL CAN BE REMOVED) AGITATOR IN THE MASH TANK E.G. FOR SYRUP MAKING ICED TEA, ETC. HACK WORK FROM MARC FUNCTION WHIRPOOLFUNKTION SIGHT GLASS IN THE PIPES LAUTER SIGHT GLASS CIP SYSTEM RING NOZZLE ANSCHWäNZEN WATER 8CM MINERAL WOOL INSULATION STEEL SHEET 3 MM INNER TANK STEEL SHEET 2 MM PANEL LASERGESCHNITTENEN LAUTERING PLATE (REMOVABLE) MARC LECH TO THE OFF GRAINS MANHOLES WITH SIGHT GLASS 2 X 0, 7KW AGITATOR MOTORS ADJUSTABLE KALLOTENFUSS WORKING PLATFORM BETWEEN TWO TANKS PLATE COOLER COOLER SPICE 6 M 2 WORT AERATION ECKROHRSIEB(HOPFENSIEB) SEASONING 2 X 5 M MILK PIPE DN 50 HOSE PUMP STAINLESS STEEL 304 L
Vendedor: Kraft-Bier GmbH
Año de construcción: usado
Ubicación: Land-aluminium frame with design for 9 x 4 = 36 berliner, \r\ndimension: 830 x 470 x 75 mm\r\n6 frames with trolley ALUMINIUM FRAME WITH DESIGN FOR 9 X 4 = 36 BERLINER, \R\NDIMENSION: 830 X 470 X 75 MM\R\N6 FRAMES WITH TROLLEY
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-cnc lathe gildemeister ctx 210

with control siemens 840 d shop turn
year of build: 2007 swing over bed rail cover 380 mm
travel in x 160 mm
travel in z: 305 mm
spindle bore: 56 mm
speed range: 20-6000 rpm with the following accessories:

sliding screen design with interior lighting
12 station turret with 6 driven tool stations
pickup device
bar feeder irco breuning ils - rbk 10012
indicator light 3 times
tailstock with quill
chip conveyor with tank
collet chuck hainbuch with foot switch
coolant system
operating instructions CNC LATHE GILDEMEISTER CTX 210 WITH CONTROL SIEMENS 840 D SHOP TURN YEAR OF BUILD: 2007 SWING OVER BED RAIL COVER 380 MM TRAVEL IN X 160 MM TRAVEL IN Z: 305 MM SPINDLE BORE: 56 MM SPEED RANGE: 20-6000 RPM WITH THE FOLLOWING ACCESSORIES: SLIDING SCREEN DESIGN WITH INTERIOR LIGHTING 12 STATION TURRET WITH 6 DRIVEN TOOL STATIONS PICKUP DEVICE BAR FEEDER IRCO BREUNING ILS - RBK 10012 INDICATOR LIGHT 3 TIMES TAILSTOCK WITH QUILL CHIP CONVEYOR WITH TANK COLLET CHUCK HAINBUCH WITH FOOT SWITCH COOLANT SYSTEM OPERATING INSTRUCTIONS
Vendedor: Martin Beschle Werkzeuge & Maschinen GmbH
Año de construcción: usado
Ubicación: Land-lifting cap.  800 kg, max tip-height 1900 mm\r\ntilting device in right hand design, 1 speed\r\nscraping device for automatic bowl emptying\r\n LIFTING CAP. 800 KG, MAX TIP-HEIGHT 1900 MM\R\NTILTING DEVICE IN RIGHT HAND DESIGN, 1 SPEED\R\NSCRAPING DEVICE FOR AUTOMATIC BOWL EMPTYING\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-vibrating sieves to the screening of different granule fractions.

containers with conical or on wheels.

simple, low-cost maintenance.

easy to clean.

quick replacing of the filter network.

engine 2-4 pole.

power discharge tamping system on request.

designed for continuous operation. VIBRATING SIEVES TO THE SCREENING OF DIFFERENT GRANULE FRACTIONS. CONTAINERS WITH CONICAL OR ON WHEELS. SIMPLE, LOW-COST MAINTENANCE. EASY TO CLEAN. QUICK REPLACING OF THE FILTER NETWORK. ENGINE 2-4 POLE. POWER DISCHARGE TAMPING SYSTEM ON REQUEST. DESIGNED FOR CONTINUOUS OPERATION.
Vendedor: AGICOM-Pedergnana OG
Año de construcción: usado
Ubicación: Land-lifting cap. 1000 kg, 1 speed, \r\ntip-height variable max. 2500 mm\r\ntilting device in left hand design\r\n LIFTING CAP. 1000 KG, 1 SPEED, \R\NTIP-HEIGHT VARIABLE MAX. 2500 MM\R\NTILTING DEVICE IN LEFT HAND DESIGN\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land--the welded frame in mono-block design ensures a good stiffness and high accuracy of the machine
-roller guide with 3-point support and an imported ad of with a handwheel adjustable cutting cone
-the simplified setting of the cutting gap by moving blade carrier and mono-block knife leads to an improvement of the quality
-since the machine with a synchronous control system with cylinders connected in series, you get a very uniform gravity. it's very simple. the cutting angle by controlling the flow to the cylinders connected in series on the different cutting thicknesses set
-a backgauge with drive and display facilitates the setting
using a lamp to indicate the cutting line, the customer can perform a shadow line cut
-the hold-down devices guarantee a reliable cutting
-infinitely variable adjustment of the cutting stroke

technical data
-maximum cutting thickness: 6 mm
-maximum cutting width: 3100 mm
-cutting gap: 0.05 - 0.60 mm
-cutting angle: 0.5-3 â°
-speed: 13-45 rpm
-maximum piston stroke: 210 mm
-maximum cutting power: 145 kn
-max down holder force: 150 kn
-maximum working pressure: 18 mpa
-rear velocity range: 10-750 mm
-oil pump / flow rate: 25 ml / r
-engine power: 7,5 kw
-motor speed: 1470 u/min
-dimensions wxhxd: 4045 x 1750 x 3770 mm
-weight: 5500 kg -THE WELDED FRAME IN MONO-BLOCK DESIGN ENSURES A GOOD STIFFNESS AND HIGH ACCURACY OF THE MACHINE -ROLLER GUIDE WITH 3-POINT SUPPORT AND AN IMPORTED AD OF WITH A HANDWHEEL ADJUSTABLE CUTTING CONE -THE SIMPLIFIED SETTING OF THE CUTTING GAP BY MOVING BLADE CARRIER AND MONO-BLOCK KNIFE LEADS TO AN IMPROVEMENT OF THE QUALITY -SINCE THE MACHINE WITH A SYNCHRONOUS CONTROL SYSTEM WITH CYLINDERS CONNECTED IN SERIES, YOU GET A VERY UNIFORM GRAVITY. IT'S VERY SIMPLE. THE CUTTING ANGLE BY CONTROLLING THE FLOW TO THE CYLINDERS CONNECTED IN SERIES ON THE DIFFERENT CUTTING THICKNESSES SET -A BACKGAUGE WITH DRIVE AND DISPLAY FACILITATES THE SETTING USING A LAMP TO INDICATE THE CUTTING LINE, THE CUSTOMER CAN PERFORM A SHADOW LINE CUT -THE HOLD-DOWN DEVICES GUARANTEE A RELIABLE CUTTING -INFINITELY VARIABLE ADJUSTMENT OF THE CUTTING STROKE TECHNICAL DATA -MAXIMUM CUTTING THICKNESS: 6 MM -MAXIMUM CUTTING WIDTH: 3100 MM -CUTTING GAP: 0.05 - 0.60 MM -CUTTING ANGLE: 0.5-3 ° -SPEED: 13-45 RPM -MAXIMUM PISTON STROKE: 210 MM -MAXIMUM CUTTING POWER: 145 KN -MAX DOWN HOLDER FORCE: 150 KN -MAXIMUM WORKING PRESSURE: 18 MPA -REAR VELOCITY RANGE: 10-750 MM -OIL PUMP / FLOW RATE: 25 ML / R -ENGINE POWER: 7,5 KW -MOTOR SPEED: 1470 U/MIN -DIMENSIONS WXHXD: 4045 X 1750 X 3770 MM -WEIGHT: 5500 KG
Vendedor: ZIEGLER Maschinen & Werkzeuge
Año de construcción: usado
Ubicación: Land-lifting cap.  400 kg, tip-height approx. 2250 mm\r\n1 speed, tilting device in left- hand design\r\n LIFTING CAP. 400 KG, TIP-HEIGHT APPROX. 2250 MM\R\N1 SPEED, TILTING DEVICE IN LEFT- HAND DESIGN\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-used stainless steel silo
last purpose: food

volume: 1200l
type: standing materials (media contact): stainless steel v2a
design: single-walled
bottom: conical bottom
topsoil: fully removable / screwed / hinged lid
working pressure according to the nameplate: atm

dimensions tank:

inside diameter: 1130mm
outside diameter: 1150 mm
cyl. height: 990mm
distance from drain to the ground: 260 mm
total height: 2010 mm
width: 1190x1190mm
height of the frame: 85mm

materials:

interior: stainless steel 1.4301 / v2a
exterior: stainless steel 1.4301 / v2a

facilities:

completely removable top shelf / screwed / hinged lid
outlet: dn 50 USED STAINLESS STEEL SILO LAST PURPOSE: FOOD VOLUME: 1200L TYPE: STANDING MATERIALS (MEDIA CONTACT): STAINLESS STEEL V2A DESIGN: SINGLE-WALLED BOTTOM: CONICAL BOTTOM TOPSOIL: FULLY REMOVABLE / SCREWED / HINGED LID WORKING PRESSURE ACCORDING TO THE NAMEPLATE: ATM DIMENSIONS TANK: INSIDE DIAMETER: 1130MM OUTSIDE DIAMETER: 1150 MM CYL. HEIGHT: 990MM DISTANCE FROM DRAIN TO THE GROUND: 260 MM TOTAL HEIGHT: 2010 MM WIDTH: 1190X1190MM HEIGHT OF THE FRAME: 85MM MATERIALS: INTERIOR: STAINLESS STEEL 1.4301 / V2A EXTERIOR: STAINLESS STEEL 1.4301 / V2A FACILITIES: COMPLETELY REMOVABLE TOP SHELF / SCREWED / HINGED LID OUTLET: DN 50
Vendedor: Inox Behälter GmbH
Año de construcción: usado
Ubicación: Land-lifting cap.  400 kg, tip-height approx,  1650 mm\r\n1 speed, moveable, ok for bowls uc 120 a\r\ntilting device in left hand design LIFTING CAP. 400 KG, TIP-HEIGHT APPROX, 1650 MM\R\N1 SPEED, MOVEABLE, OK FOR BOWLS UC 120 A\R\NTILTING DEVICE IN LEFT HAND DESIGN
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-<b>properties</b>

used belt conveyor of manufacturer trans standard
incl. motor
ideal for fast material handling
expertly disassembled and packed
condition: fully operational
6 stk. in stock

<b>belt conveyors</b>

the belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and woodworking machines. also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances.

<b>technical data:</b>

mass of the belt conveyor
overall length: 1,000 mm
total width: 1,030 mm
total width me engine: 1, 300 mm
height: 140mm

<b>information on the belt</b>
belt width: 900 mm
strap type: smooth aluminium frame <B>PROPERTIES</B> USED BELT CONVEYOR OF MANUFACTURER TRANS STANDARD INCL. MOTOR IDEAL FOR FAST MATERIAL HANDLING EXPERTLY DISASSEMBLED AND PACKED CONDITION: FULLY OPERATIONAL 6 STK. IN STOCK <B>BELT CONVEYORS</B> THE BELT IS IDEAL TO DOVETAIL MACHINES OR JOBS IN THE PICKING ZONE AND TO OPTIMIZE THE INTERNAL PROCESS. TRANSPORTATION CAN FOSTER THE BELT CONVEYOR SENSITIVE AND DIFFERENT-SIZED CONTAINERS, BOXES OR OTHER PACKAGING AND ARTICLE UNITS TO THE TASK OR DELIVERY POINT AND, FOR EXAMPLE, ALSO SERVES AS A CONNECTING ROUTE BEFORE OR BETWEEN PRODUCTION AND WOODWORKING MACHINES. ALSO ENABLES EFFICIENT PARTS IN OPERATING AND STORAGE AND IS DESIGNED TO PROMOTE SIGNIFICANT FLOW RATES AND DISTANCES. <B>TECHNICAL DATA:</B> MASS OF THE BELT CONVEYOR OVERALL LENGTH: 1,000 MM TOTAL WIDTH: 1,030 MM TOTAL WIDTH ME ENGINE: 1, 300 MM HEIGHT: 140MM <B>INFORMATION ON THE BELT</B> BELT WIDTH: 900 MM STRAP TYPE: SMOOTH ALUMINIUM FRAME
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Ubicación: Land-lifting cap.  400 kg, tip-height approx,  1650 mm\r\n1 speed, moveable, ok for bowls uc 120 a\r\ntilting device in left hand design LIFTING CAP. 400 KG, TIP-HEIGHT APPROX, 1650 MM\R\N1 SPEED, MOVEABLE, OK FOR BOWLS UC 120 A\R\NTILTING DEVICE IN LEFT HAND DESIGN
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-<b>properties</b>

used belt conveyor of manufacturer trans standard
incl. motor
ideal for fast material handling
expertly disassembled and packed
condition: fully operational
6 stk. in stock

<b>belt conveyors</b>

the belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and woodworking machines. also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances.

<b>technical data:</b>

mass of the belt conveyor
overall length: 1,420 mm
total width: 1,030 mm
total width me engine: 1, 300 mm
height: 140mm

<b>information on the belt</b>
belt width: 900 mm
strap type: smooth aluminium frame <B>PROPERTIES</B> USED BELT CONVEYOR OF MANUFACTURER TRANS STANDARD INCL. MOTOR IDEAL FOR FAST MATERIAL HANDLING EXPERTLY DISASSEMBLED AND PACKED CONDITION: FULLY OPERATIONAL 6 STK. IN STOCK <B>BELT CONVEYORS</B> THE BELT IS IDEAL TO DOVETAIL MACHINES OR JOBS IN THE PICKING ZONE AND TO OPTIMIZE THE INTERNAL PROCESS. TRANSPORTATION CAN FOSTER THE BELT CONVEYOR SENSITIVE AND DIFFERENT-SIZED CONTAINERS, BOXES OR OTHER PACKAGING AND ARTICLE UNITS TO THE TASK OR DELIVERY POINT AND, FOR EXAMPLE, ALSO SERVES AS A CONNECTING ROUTE BEFORE OR BETWEEN PRODUCTION AND WOODWORKING MACHINES. ALSO ENABLES EFFICIENT PARTS IN OPERATING AND STORAGE AND IS DESIGNED TO PROMOTE SIGNIFICANT FLOW RATES AND DISTANCES. <B>TECHNICAL DATA:</B> MASS OF THE BELT CONVEYOR OVERALL LENGTH: 1,420 MM TOTAL WIDTH: 1,030 MM TOTAL WIDTH ME ENGINE: 1, 300 MM HEIGHT: 140MM <B>INFORMATION ON THE BELT</B> BELT WIDTH: 900 MM STRAP TYPE: SMOOTH ALUMINIUM FRAME
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Ubicación: Land-lifting cap.  400 kg, tip-height 2150 mm\r\n1 speed, ok for bowls w & p-- uc 80/uc 120\r\ntilting device in right hand design\r\n LIFTING CAP. 400 KG, TIP-HEIGHT 2150 MM\R\N1 SPEED, OK FOR BOWLS W & P-- UC 80/UC 120\R\NTILTING DEVICE IN RIGHT HAND DESIGN\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-id 38744 used slitting line 600 x 3 cattaneo 
sheet width max 600mm; sheet thickness max 3mm; max.weight of coil 8 ton; feed velocity max.100m/min.; decoiler design single reel; mandrel expansion range 500; slitting shears strip width min.25mm; shaft diameter 120mm  ID 38744 USED SLITTING LINE 600 X 3 CATTANEO SHEET WIDTH MAX 600MM; SHEET THICKNESS MAX 3MM; MAX.WEIGHT OF COIL 8 TON; FEED VELOCITY MAX.100M/MIN.; DECOILER DESIGN SINGLE REEL; MANDREL EXPANSION RANGE 500; SLITTING SHEARS STRIP WIDTH MIN.25MM; SHAFT DIAMETER 120MM
Vendedor: Guerrieri Srl
Año de construcción: usado
Precio: 35.200 EU€
Ubicación: Land-the machine is designed for grinding simple wooden elements placed in line. THE MACHINE IS DESIGNED FOR GRINDING SIMPLE WOODEN ELEMENTS PLACED IN LINE.
Vendedor: Kennedy Machines
Año de construcción: usado
Precio: 620 €
Ubicación: Land-design and drilling machine series vitap length 1200 mm, width 900 mm, height 1600 mm
2 x 27 piece spindles
stop with 2 extensions for series hole
machine wheels
weight 450 kg
length mm, width 900 mm, height 1200 1600 mm
built in 1994

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12 


 DESIGN AND DRILLING MACHINE SERIES VITAP LENGTH 1200 MM, WIDTH 900 MM, HEIGHT 1600 MM 2 X 27 PIECE SPINDLES STOP WITH 2 EXTENSIONS FOR SERIES HOLE MACHINE WHEELS WEIGHT 450 KG LENGTH MM, WIDTH 900 MM, HEIGHT 1200 1600 MM BUILT IN 1994 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Precio: 112.500 EU€
Ubicación: Land-machine designed for vertical wells. it is used in construction works. during the inspection no malfunctions or shortages were found in the equipment or equipment (except batteries). MACHINE DESIGNED FOR VERTICAL WELLS. IT IS USED IN CONSTRUCTION WORKS. DURING THE INSPECTION NO MALFUNCTIONS OR SHORTAGES WERE FOUND IN THE EQUIPMENT OR EQUIPMENT (EXCEPT BATTERIES).
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-automatic vertical baling line autefa, year 1999

this baling line was made by autefa in year 1999. the line has been used to press bales from a fibrous by-product from a pulp process, and is suitable for different kinds of man-made and natural materials, including cotton, wool, straw, paper, plastic etc. the baling system consists of four parallel infeed and pre-pressing lines, two main presses with wrapping and strapping functions, a two-lane rail system to and from the presses and an automated warehouse system in two floors including a lift for product bales, stackers, labelers and conveyors. the system can bale two different materials simultaneously, as each fiber line is assigned to a different pre-press.

working description:

the material is pneumatically conveyed via an air tube to a vertical dosing system. the material is separated from the transporting airflow and collected into a chamber, which cyclically releases the accumulated material into another collection chamber below it. once the desired amount is collected to the second chamber, it is gravitationally released to a pre-pressing unit below. in the pre-pressing unit, the material is pressed into a bin, which is then transported via the rail system to the main press. the main press unit presses the bale into desired dimensions, removes the bin and wraps plastic straps and film around the bale. the bin is then transported back to pre-pressing unit and the bale to an automated warehouse via the two-lane rail system.

technical data:

manufacturer: autefa solutions
year: 1999
type: uni box 2000
capacity: 220 t/day
control plc: allen bradley
number of pre-presses: 4
number of main presses: 2
number of operators: 1   AUTOMATIC VERTICAL BALING LINE AUTEFA, YEAR 1999 THIS BALING LINE WAS MADE BY AUTEFA IN YEAR 1999. THE LINE HAS BEEN USED TO PRESS BALES FROM A FIBROUS BY-PRODUCT FROM A PULP PROCESS, AND IS SUITABLE FOR DIFFERENT KINDS OF MAN-MADE AND NATURAL MATERIALS, INCLUDING COTTON, WOOL, STRAW, PAPER, PLASTIC ETC. THE BALING SYSTEM CONSISTS OF FOUR PARALLEL INFEED AND PRE-PRESSING LINES, TWO MAIN PRESSES WITH WRAPPING AND STRAPPING FUNCTIONS, A TWO-LANE RAIL SYSTEM TO AND FROM THE PRESSES AND AN AUTOMATED WAREHOUSE SYSTEM IN TWO FLOORS INCLUDING A LIFT FOR PRODUCT BALES, STACKERS, LABELERS AND CONVEYORS. THE SYSTEM CAN BALE TWO DIFFERENT MATERIALS SIMULTANEOUSLY, AS EACH FIBER LINE IS ASSIGNED TO A DIFFERENT PRE-PRESS. WORKING DESCRIPTION: THE MATERIAL IS PNEUMATICALLY CONVEYED VIA AN AIR TUBE TO A VERTICAL DOSING SYSTEM. THE MATERIAL IS SEPARATED FROM THE TRANSPORTING AIRFLOW AND COLLECTED INTO A CHAMBER, WHICH CYCLICALLY RELEASES THE ACCUMULATED MATERIAL INTO ANOTHER COLLECTION CHAMBER BELOW IT. ONCE THE DESIRED AMOUNT IS COLLECTED TO THE SECOND CHAMBER, IT IS GRAVITATIONALLY RELEASED TO A PRE-PRESSING UNIT BELOW. IN THE PRE-PRESSING UNIT, THE MATERIAL IS PRESSED INTO A BIN, WHICH IS THEN TRANSPORTED VIA THE RAIL SYSTEM TO THE MAIN PRESS. THE MAIN PRESS UNIT PRESSES THE BALE INTO DESIRED DIMENSIONS, REMOVES THE BIN AND WRAPS PLASTIC STRAPS AND FILM AROUND THE BALE. THE BIN IS THEN TRANSPORTED BACK TO PRE-PRESSING UNIT AND THE BALE TO AN AUTOMATED WAREHOUSE VIA THE TWO-LANE RAIL SYSTEM. TECHNICAL DATA: MANUFACTURER: AUTEFA SOLUTIONS YEAR: 1999 TYPE: UNI BOX 2000 CAPACITY: 220 T/DAY CONTROL PLC: ALLEN BRADLEY NUMBER OF PRE-PRESSES: 4 NUMBER OF MAIN PRESSES: 2 NUMBER OF OPERATORS: 1
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-number of milling spindles: 1 st.<br/>fence: ja ja /nein<br/>workpiece: ja <br/>crosscutting milling machine stegherr, type ksf-mini<br/><br/><br/>special milling machine for the efficient production of crossbar joints.<br/><br/>the cross-grain milling machine ksf-mini is the product of great experience of <br/>the company<br/>stegherr in the construction of this special milling machine for cross-rung <br/>joints.<br/><br/>with the ksf-mini all can be found in practice<br/>cross joint connections<br/>be produced quickly and accurately. also already profiled sprouts<br/>can be<br/>on the ksf-mini edit. the precise milling is achieved because the<br/>workpiece in<br/>a clamping is handled on three sides.<br/><br/>the tool drive takes place via two three-phase motors, the tension of<br/>workpieces pneumatic.<br/><br/>the profile cutter is designed for the web width. the saw blades, which are the<br/>flatten out,<br/>are adjustable by intermediate rings to the dimensions of the profile cutter.<br/><br/>the swivel device is free of play.<br/><br/>the machine is designed for a maximum workpiece cross section of 56 x 46<br/>mm.<br/><br/>motor 2.2 kw, 380 v 50 hz<br/><br/>pneumatic pressure 6 bar<br/><br/>included:<br/><br/>- footswitch operation<br/>- table base<br/>- ruler<br/>- 2 saw blades<br/>- 1 profile cutter<br/><br/>(technical data according to the manufacturer, without guarantee!)<br/><br/><br/><br/><br/> NUMBER OF MILLING SPINDLES: 1 ST.
FENCE: JA JA /NEIN
WORKPIECE: JA
CROSSCUTTING MILLING MACHINE STEGHERR, TYPE KSF-MINI


SPECIAL MILLING MACHINE FOR THE EFFICIENT PRODUCTION OF CROSSBAR JOINTS.

THE CROSS-GRAIN MILLING MACHINE KSF-MINI IS THE PRODUCT OF GREAT EXPERIENCE OF
THE COMPANY
STEGHERR IN THE CONSTRUCTION OF THIS SPECIAL MILLING MACHINE FOR CROSS-RUNG
JOINTS.

WITH THE KSF-MINI ALL CAN BE FOUND IN PRACTICE
CROSS JOINT CONNECTIONS
BE PRODUCED QUICKLY AND ACCURATELY. ALSO ALREADY PROFILED SPROUTS
CAN BE
ON THE KSF-MINI EDIT. THE PRECISE MILLING IS ACHIEVED BECAUSE THE
WORKPIECE IN
A CLAMPING IS HANDLED ON THREE SIDES.

THE TOOL DRIVE TAKES PLACE VIA TWO THREE-PHASE MOTORS, THE TENSION OF
WORKPIECES PNEUMATIC.

THE PROFILE CUTTER IS DESIGNED FOR THE WEB WIDTH. THE SAW BLADES, WHICH ARE THE
FLATTEN OUT,
ARE ADJUSTABLE BY INTERMEDIATE RINGS TO THE DIMENSIONS OF THE PROFILE CUTTER.

THE SWIVEL DEVICE IS FREE OF PLAY.

THE MACHINE IS DESIGNED FOR A MAXIMUM WORKPIECE CROSS SECTION OF 56 X 46
MM.

MOTOR 2.2 KW, 380 V 50 HZ

PNEUMATIC PRESSURE 6 BAR

INCLUDED:

- FOOTSWITCH OPERATION
- TABLE BASE
- RULER
- 2 SAW BLADES
- 1 PROFILE CUTTER

(TECHNICAL DATA ACCORDING TO THE MANUFACTURER, WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-diesel generator power plant 119 mw with wartsila 7x18v46 hfo

this 119 mw power plant (iso condition) was delivered by wartsila in year 2002, operation started in 2003 and it has 7 x 18v46 diesel engines running on heavy fuel oil (hfo) at 500 rpm coupled with abb made brushless synchronous 11 kv / 50 hz alternators. i has been in operated under ppa and engines have been operated around 60 000 hours in base load power production. this power plant is designed and build by wartsila utilizing their highly standardized functional module delivery. operation and maintenance works were carried out strictly in accordance with wartsila manuals. the plant was professionally dismantled in 2017 and before dismantling 60 000 hour major overhauled was carried out to all engines. during the operation no any unexpected breakdowns has happened. delivery contains complete functioning power plant equipment with 110 kv switchyard equipment. buildings and tanks can be discussed but are not a part of our standard offering.

main plant characteristics at current site conditions:

power output iso from alternators: 119 mw at 110 kv / 50 hz
engines: 7 x 18v46 - 500 rpm
alternators: abb amg 1600 ss12 dseb self-cooled, brushless, synchronous
power factor: 0.8
efficiency: 0.97 (at rated output, 50 hz and power factor 0.8)
voltage: 11 000 v, with adjustment range +5 - 10%
frequency: 50 hz +/-5%
fuel consumption gross: 8290 - 8330 kj/kwh (43.4 to 43.2 % efficiency)
lube oil consumption: 0.7 g/kwh
cooling system: closed loop radiator cooling
fuel oil: hfo viscosity max 380 cst / 50 °c   DIESEL GENERATOR POWER PLANT 119 MW WITH WARTSILA 7X18V46 HFO THIS 119 MW POWER PLANT (ISO CONDITION) WAS DELIVERED BY WARTSILA IN YEAR 2002, OPERATION STARTED IN 2003 AND IT HAS 7 X 18V46 DIESEL ENGINES RUNNING ON HEAVY FUEL OIL (HFO) AT 500 RPM COUPLED WITH ABB MADE BRUSHLESS SYNCHRONOUS 11 KV / 50 HZ ALTERNATORS. I HAS BEEN IN OPERATED UNDER PPA AND ENGINES HAVE BEEN OPERATED AROUND 60 000 HOURS IN BASE LOAD POWER PRODUCTION. THIS POWER PLANT IS DESIGNED AND BUILD BY WARTSILA UTILIZING THEIR HIGHLY STANDARDIZED FUNCTIONAL MODULE DELIVERY. OPERATION AND MAINTENANCE WORKS WERE CARRIED OUT STRICTLY IN ACCORDANCE WITH WARTSILA MANUALS. THE PLANT WAS PROFESSIONALLY DISMANTLED IN 2017 AND BEFORE DISMANTLING 60 000 HOUR MAJOR OVERHAULED WAS CARRIED OUT TO ALL ENGINES. DURING THE OPERATION NO ANY UNEXPECTED BREAKDOWNS HAS HAPPENED. DELIVERY CONTAINS COMPLETE FUNCTIONING POWER PLANT EQUIPMENT WITH 110 KV SWITCHYARD EQUIPMENT. BUILDINGS AND TANKS CAN BE DISCUSSED BUT ARE NOT A PART OF OUR STANDARD OFFERING. MAIN PLANT CHARACTERISTICS AT CURRENT SITE CONDITIONS: POWER OUTPUT ISO FROM ALTERNATORS: 119 MW AT 110 KV / 50 HZ ENGINES: 7 X 18V46 - 500 RPM ALTERNATORS: ABB AMG 1600 SS12 DSEB SELF-COOLED, BRUSHLESS, SYNCHRONOUS POWER FACTOR: 0.8 EFFICIENCY: 0.97 (AT RATED OUTPUT, 50 HZ AND POWER FACTOR 0.8) VOLTAGE: 11 000 V, WITH ADJUSTMENT RANGE +5 - 10% FREQUENCY: 50 HZ +/-5% FUEL CONSUMPTION GROSS: 8290 - 8330 KJ/KWH (43.4 TO 43.2 % EFFICIENCY) LUBE OIL CONSUMPTION: 0.7 G/KWH COOLING SYSTEM: CLOSED LOOP RADIATOR COOLING FUEL OIL: HFO VISCOSITY MAX 380 CST / 50 °C
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 6.800 €
Ubicación: Land-bore diameter: 8 mm<br/>number of heads horizontal: 5 st.<br/>number of heads vertical: 3 st.<br/>control: ja <br/>! machine is still in use and can be visited!<br/><br/>to sell on behalf of the customer!<br/><br/>1 stegherr drilling center type bz<br/>**************************************<br/>the machine has 3 aggregate slides, of which aggregate slides<br/>1 fixed and unit slides 2 and 3 via the control to preset values<br/>be positioned.<br/><br/>unit carriage 1 (fixed) equipped with:<br/>-------------------------------------------------- -<br/><br/>a) 1 drilling unit for drilling the front side of the workpieces with<br/>  triple drill head, drilling distance: 28/41 mm<br/>- drilling spindles individually retrievable<br/>- drilling stroke: max. 80 mm<br/>- speed ??of the drilling spindles: approx. 4000 rpm<br/>- engine power: approx. 1.1 kw<br/>- chip extraction: diameter 160 mm<br/>- suction hose upwards<br/><br/>b) 1 stainless steel high pressure glue nozzle<br/>- legemount adjustable via program<br/>- glue monitoring via program<br/><br/>c) 1 dowel driving head for dowel diameter 8 mm, dowel length 60 mm<br/>- feeding and separation of the dowels via vibratory conveyors<br/>  3 dowels, arranged like drill head, driving in max. 3 dowels<br/>  in one operation<br/>- workpiece stop, lowered via pneumatic cylinder, around the workpiece<br/>  to strike exactly<br/><br/>d) 1 top bandbohraggregat arranged from above, with triple drill head<br/>  for roto pot bore<br/>- drilling stroke: max. 80 mm<br/>- engine power: approx. 1.1 kw<br/>- speed: about 4500 rpm<br/><br/>e) 1 carriage with controlled axis (x)<br/>  for moving the drilling, glueing and dividing unit to the programmed<br/>  drilling positions<br/>- swivel axis, swivel range 90 °<br/>  for converting the drilling unit from end to longitudinal operation<br/>  here, the entire axis (x) is also swiveled around this axis<br/>  to be used for longitudinal operation<br/><br/>aggregate carriage 2<br/><br/>the entire unit can be positioned in the x-axis via a servomotor and<br/>can thus reach any position on the workpiece and there the programmed<br/>doing work.<br/><br/>the aggregate carriage is equipped with:<br/><br/>a) drilling unit with 3 individually retrievable spindles for drilling the<br/>  fighter, rung and post drilling patterns on the long side of the workpiece<br/>  or the dowel holes on the workpiece ends.<br/>- drilling distance: 28/41 mm<br/>- drilling stroke for each spindle: max. 80 mm<br/>- speed: about 4000 rpm<br/>- engine power: approx. 1.1 kw<br/><br/>b) drilling unit for lock plate hole, equipped with:<br/><br/>- simple boring head<br/>- fixed in height - distance from workpiece support: 51 mm<br/>- drill diameter: 2.5 mm<br/>- drilling stroke: max. 80 mm<br/>- speed: about 4500 rpm<br/>- engine power: approx. 1.1 kw<br/><br/>c) drilling unit for mounting holes:<br/><br/>- drilling stroke: max. 80 mm<br/>- speed: about 4500 rpm<br/>- engine power: approx. 1.1 kw<br/>- mechanically fixed in height - distance from workpiece support: 31 mm<br/><br/>d) workpiece support table<br/>  with pneumatic workpiece clamping device and mounted topfandbohraggregat<br/>- can be disconnected voom unit carriage (pneumatic) and the<br/>  aggregate slides can each over this point left or right<br/>  bohraufgabenausführen. this is horizontal from each one<br/>  arranged aggregate possible until the end of the workpiece<br/><br/>e) topfandbohraggregat arranged from above with triple drill head<br/>  for roto pot bore<br/>- drilling stroke: max. 80 mm<br/>- engine power: approx. 1.1 kw<br/>- speed: about 4500 rpm<br/><br/>aggregate carriage 3<br/><br/>servo axis in x direction, this turns on program on the<br/>workpiece length.<br/><br/>a) 1 drilling unit for drilling the front side of the wersktücke with triple <br/>drill head<br/>- drilling distance: 28/41 mm<br/>- drilling spindles individually retrievable<br/>- drilling stroke: max. 80 mm<br/>- drehzhal the drill spindles: about 4000 u / min<br/>- engine power: approx. 1.1 kw<br/>- chip extraction: diameter 160 mm<br/>- suction hose upwards<br/><br/>b) 1 stainless steel high pressure glue nozzle<br/>- legemount adjustable via program<br/>- glue monitoring via program<br/><br/>c) 1 dowel driving head for dowel diameter 8 mm, dowel length 60 mm<br/>- feeding and separation of the dowels via vibratory conveyors<br/>- 3 dowels, arranged like drill head, driving max. 3 dowels<br/>  in one operation<br/>- workpiece stop, lowered via pneumatic cylinder, around the workpiece<br/>  to strike exactly<br/><br/>d) 1 topfbandbohraggregat arranged from above<br/>  with triple drill head for roto pot bore<br/>- drilling stroke: max. 80 mm<br/>- engine power: approx. 1.1 kw<br/>- speed: about 4500 rpm<br/><br/>e) 1 carriage with controlled axis (x)<br/>  for moving the drilling, glue and dowel unit to the programmed<br/>  drilling positions<br/>- swivel axis, swivel range 90 °, for converting the drilling unit of<br/>  forehead-on longitudinal operation.<br/>  here, the entire axis (x) is also swiveled around this axis<br/>  to be used for longitudinal operation<br/><br/>the entire unit can be positioned in the x-axis via a servomotor and<br/>can thus reach any position on the workpiece and there the programmed<br/>doing work.<br/><br/>workpiece length scanning, so that the end holes are at the exact distance from<br/>external dimensions can be set.<br/>drilling unit automatically corrects any length deviations on the workpiece<br/>within a certain tolerance range.<br/><br/>for workpieces longer than 3 m, this workpiece must be in two working lengths<br/>be processed.<br/><br/>technical specifications:<br/><br/>- max. workpiece length: 3000 mm<br/>- min. workpiece length: 320 mm<br/>- workpiece thickness: 40-80 mm<br/>- workpiece clamping: pneumatic<br/>- workpiece loading or unloading: manually<br/>- all travel paths run on high-precision linear guides<br/>- 4 electronically program controlled axes (ball screw operation<br/>  or rack)<br/>- high-pressure glue system in stainless steel<br/>- glue monitoring via program<br/>- leichenge adjustable via control<br/>- 1 dowel vibration conveyor (large version) for anchor diameter 8 mm,<br/>  dowel length 60 mm<br/>- six-track dowel separation and feed (3x for right, 3x for left)<br/><br/>machine power is about 4 parts per minute. this is an average,<br/>which in individual cases may vary slightly upwards or downwards.<br/><br/>control of the machine<br/><br/>- pc / plc control based on windows<br/>- pc in industrial design with floppy disk drive, keyboard and<br/>  15farbbild flat monitor<br/>- user friendly machine program<br/>- high storage capacity<br/>- graphic blocks for visualization of the programmed drilling patterns<br/>program with error indication, i. errors that occur in the program flow<br/>  can be displayed on the screen and can thereby<br/>  be localized faster and corrected.<br/><br/>- extraction: 3 x diameter 160 upwards<br/>- extraction speed: approx. 25 m / s<br/><br/>the machine is online-enabled<br/><br/><br/>(techn. data according to manufacturer - without guarantee!)<br/><br/><br/><br/><br/> BORE DIAMETER: 8 MM
NUMBER OF HEADS HORIZONTAL: 5 ST.
NUMBER OF HEADS VERTICAL: 3 ST.
CONTROL: JA
! MACHINE IS STILL IN USE AND CAN BE VISITED!

TO SELL ON BEHALF OF THE CUSTOMER!

1 STEGHERR DRILLING CENTER TYPE BZ
**************************************
THE MACHINE HAS 3 AGGREGATE SLIDES, OF WHICH AGGREGATE SLIDES
1 FIXED AND UNIT SLIDES 2 AND 3 VIA THE CONTROL TO PRESET VALUES
BE POSITIONED.

UNIT CARRIAGE 1 (FIXED) EQUIPPED WITH:
-------------------------------------------------- -

A) 1 DRILLING UNIT FOR DRILLING THE FRONT SIDE OF THE WORKPIECES WITH
TRIPLE DRILL HEAD, DRILLING DISTANCE: 28/41 MM
- DRILLING SPINDLES INDIVIDUALLY RETRIEVABLE
- DRILLING STROKE: MAX. 80 MM
- SPEED ??OF THE DRILLING SPINDLES: APPROX. 4000 RPM
- ENGINE POWER: APPROX. 1.1 KW
- CHIP EXTRACTION: DIAMETER 160 MM
- SUCTION HOSE UPWARDS

B) 1 STAINLESS STEEL HIGH PRESSURE GLUE NOZZLE
- LEGEMOUNT ADJUSTABLE VIA PROGRAM
- GLUE MONITORING VIA PROGRAM

C) 1 DOWEL DRIVING HEAD FOR DOWEL DIAMETER 8 MM, DOWEL LENGTH 60 MM
- FEEDING AND SEPARATION OF THE DOWELS VIA VIBRATORY CONVEYORS
3 DOWELS, ARRANGED LIKE DRILL HEAD, DRIVING IN MAX. 3 DOWELS
IN ONE OPERATION
- WORKPIECE STOP, LOWERED VIA PNEUMATIC CYLINDER, AROUND THE WORKPIECE
TO STRIKE EXACTLY

D) 1 TOP BANDBOHRAGGREGAT ARRANGED FROM ABOVE, WITH TRIPLE DRILL HEAD
FOR ROTO POT BORE
- DRILLING STROKE: MAX. 80 MM
- ENGINE POWER: APPROX. 1.1 KW
- SPEED: ABOUT 4500 RPM

E) 1 CARRIAGE WITH CONTROLLED AXIS (X)
FOR MOVING THE DRILLING, GLUEING AND DIVIDING UNIT TO THE PROGRAMMED
DRILLING POSITIONS
- SWIVEL AXIS, SWIVEL RANGE 90 °
FOR CONVERTING THE DRILLING UNIT FROM END TO LONGITUDINAL OPERATION
HERE, THE ENTIRE AXIS (X) IS ALSO SWIVELED AROUND THIS AXIS
TO BE USED FOR LONGITUDINAL OPERATION

AGGREGATE CARRIAGE 2

THE ENTIRE UNIT CAN BE POSITIONED IN THE X-AXIS VIA A SERVOMOTOR AND
CAN THUS REACH ANY POSITION ON THE WORKPIECE AND THERE THE PROGRAMMED
DOING WORK.

THE AGGREGATE CARRIAGE IS EQUIPPED WITH:

A) DRILLING UNIT WITH 3 INDIVIDUALLY RETRIEVABLE SPINDLES FOR DRILLING THE
FIGHTER, RUNG AND POST DRILLING PATTERNS ON THE LONG SIDE OF THE WORKPIECE
OR THE DOWEL HOLES ON THE WORKPIECE ENDS.
- DRILLING DISTANCE: 28/41 MM
- DRILLING STROKE FOR EACH SPINDLE: MAX. 80 MM
- SPEED: ABOUT 4000 RPM
- ENGINE POWER: APPROX. 1.1 KW

B) DRILLING UNIT FOR LOCK PLATE HOLE, EQUIPPED WITH:

- SIMPLE BORING HEAD
- FIXED IN HEIGHT - DISTANCE FROM WORKPIECE SUPPORT: 51 MM
- DRILL DIAMETER: 2.5 MM
- DRILLING STROKE: MAX. 80 MM
- SPEED: ABOUT 4500 RPM
- ENGINE POWER: APPROX. 1.1 KW

C) DRILLING UNIT FOR MOUNTING HOLES:

- DRILLING STROKE: MAX. 80 MM
- SPEED: ABOUT 4500 RPM
- ENGINE POWER: APPROX. 1.1 KW
- MECHANICALLY FIXED IN HEIGHT - DISTANCE FROM WORKPIECE SUPPORT: 31 MM

D) WORKPIECE SUPPORT TABLE
WITH PNEUMATIC WORKPIECE CLAMPING DEVICE AND MOUNTED TOPFANDBOHRAGGREGAT
- CAN BE DISCONNECTED VOOM UNIT CARRIAGE (PNEUMATIC) AND THE
AGGREGATE SLIDES CAN EACH OVER THIS POINT LEFT OR RIGHT
BOHRAUFGABENAUSFüHREN. THIS IS HORIZONTAL FROM EACH ONE
ARRANGED AGGREGATE POSSIBLE UNTIL THE END OF THE WORKPIECE

E) TOPFANDBOHRAGGREGAT ARRANGED FROM ABOVE WITH TRIPLE DRILL HEAD
FOR ROTO POT BORE
- DRILLING STROKE: MAX. 80 MM
- ENGINE POWER: APPROX. 1.1 KW
- SPEED: ABOUT 4500 RPM

AGGREGATE CARRIAGE 3

SERVO AXIS IN X DIRECTION, THIS TURNS ON PROGRAM ON THE
WORKPIECE LENGTH.

A) 1 DRILLING UNIT FOR DRILLING THE FRONT SIDE OF THE WERSKTüCKE WITH TRIPLE
DRILL HEAD
- DRILLING DISTANCE: 28/41 MM
- DRILLING SPINDLES INDIVIDUALLY RETRIEVABLE
- DRILLING STROKE: MAX. 80 MM
- DREHZHAL THE DRILL SPINDLES: ABOUT 4000 U / MIN
- ENGINE POWER: APPROX. 1.1 KW
- CHIP EXTRACTION: DIAMETER 160 MM
- SUCTION HOSE UPWARDS

B) 1 STAINLESS STEEL HIGH PRESSURE GLUE NOZZLE
- LEGEMOUNT ADJUSTABLE VIA PROGRAM
- GLUE MONITORING VIA PROGRAM

C) 1 DOWEL DRIVING HEAD FOR DOWEL DIAMETER 8 MM, DOWEL LENGTH 60 MM
- FEEDING AND SEPARATION OF THE DOWELS VIA VIBRATORY CONVEYORS
- 3 DOWELS, ARRANGED LIKE DRILL HEAD, DRIVING MAX. 3 DOWELS
IN ONE OPERATION
- WORKPIECE STOP, LOWERED VIA PNEUMATIC CYLINDER, AROUND THE WORKPIECE
TO STRIKE EXACTLY

D) 1 TOPFBANDBOHRAGGREGAT ARRANGED FROM ABOVE
WITH TRIPLE DRILL HEAD FOR ROTO POT BORE
- DRILLING STROKE: MAX. 80 MM
- ENGINE POWER: APPROX. 1.1 KW
- SPEED: ABOUT 4500 RPM

E) 1 CARRIAGE WITH CONTROLLED AXIS (X)
FOR MOVING THE DRILLING, GLUE AND DOWEL UNIT TO THE PROGRAMMED
DRILLING POSITIONS
- SWIVEL AXIS, SWIVEL RANGE 90 °, FOR CONVERTING THE DRILLING UNIT OF
FOREHEAD-ON LONGITUDINAL OPERATION.
HERE, THE ENTIRE AXIS (X) IS ALSO SWIVELED AROUND THIS AXIS
TO BE USED FOR LONGITUDINAL OPERATION

THE ENTIRE UNIT CAN BE POSITIONED IN THE X-AXIS VIA A SERVOMOTOR AND
CAN THUS REACH ANY POSITION ON THE WORKPIECE AND THERE THE PROGRAMMED
DOING WORK.

WORKPIECE LENGTH SCANNING, SO THAT THE END HOLES ARE AT THE EXACT DISTANCE FROM
EXTERNAL DIMENSIONS CAN BE SET.
DRILLING UNIT AUTOMATICALLY CORRECTS ANY LENGTH DEVIATIONS ON THE WORKPIECE
WITHIN A CERTAIN TOLERANCE RANGE.

FOR WORKPIECES LONGER THAN 3 M, THIS WORKPIECE MUST BE IN TWO WORKING LENGTHS
BE PROCESSED.

TECHNICAL SPECIFICATIONS:

- MAX. WORKPIECE LENGTH: 3000 MM
- MIN. WORKPIECE LENGTH: 320 MM
- WORKPIECE THICKNESS: 40-80 MM
- WORKPIECE CLAMPING: PNEUMATIC
- WORKPIECE LOADING OR UNLOADING: MANUALLY
- ALL TRAVEL PATHS RUN ON HIGH-PRECISION LINEAR GUIDES
- 4 ELECTRONICALLY PROGRAM CONTROLLED AXES (BALL SCREW OPERATION
OR RACK)
- HIGH-PRESSURE GLUE SYSTEM IN STAINLESS STEEL
- GLUE MONITORING VIA PROGRAM
- LEICHENGE ADJUSTABLE VIA CONTROL
- 1 DOWEL VIBRATION CONVEYOR (LARGE VERSION) FOR ANCHOR DIAMETER 8 MM,
DOWEL LENGTH 60 MM
- SIX-TRACK DOWEL SEPARATION AND FEED (3X FOR RIGHT, 3X FOR LEFT)

MACHINE POWER IS ABOUT 4 PARTS PER MINUTE. THIS IS AN AVERAGE,
WHICH IN INDIVIDUAL CASES MAY VARY SLIGHTLY UPWARDS OR DOWNWARDS.

CONTROL OF THE MACHINE

- PC / PLC CONTROL BASED ON WINDOWS
- PC IN INDUSTRIAL DESIGN WITH FLOPPY DISK DRIVE, KEYBOARD AND
15FARBBILD FLAT MONITOR
- USER FRIENDLY MACHINE PROGRAM
- HIGH STORAGE CAPACITY
- GRAPHIC BLOCKS FOR VISUALIZATION OF THE PROGRAMMED DRILLING PATTERNS
PROGRAM WITH ERROR INDICATION, I. ERRORS THAT OCCUR IN THE PROGRAM FLOW
CAN BE DISPLAYED ON THE SCREEN AND CAN THEREBY
BE LOCALIZED FASTER AND CORRECTED.

- EXTRACTION: 3 X DIAMETER 160 UPWARDS
- EXTRACTION SPEED: APPROX. 25 M / S

THE MACHINE IS ONLINE-ENABLED


(TECHN. DATA ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-rinser for glass and pet bottles, fully automatic wab adv 12 000 bph
 
the rinser was made by italian wab in year 2003 and it has capacity of 12 000 bph this machine has a special grip which allows to work with both pet and glass bottles. it is designed to rinse bottles inside with water or specific detergents with adjustable concentration. as an option, machine is equipped with rinsing water filtration system which protects and avoids dirty water penetration in to rinsing system. for easy operation and format change, machine is equipped with electronic carousel height adjustment. the rinser in dismantled and in good condition.
 
technical description
 
suitable for: glass and pet bottles
manufacturer: wab (italy)
manufacturing year: 2003
model: adv 1r+1s 7-35-125-107
number of rinsing heads: 35
maximum pitch: 125 mm
capacity: 12 000 bph
used for bottle sizes: 350 - 1000 ml
bottle diameters used: 58.2 - 79.5 mm
botlle heights used: 214 - 355 mm
rinsing temperature min: 10 c - max 40 c degrees
serial nr: c646/35 adv
electricity: 220v / 50 hz
installed power: 9,5 kva   RINSER FOR GLASS AND PET BOTTLES, FULLY AUTOMATIC WAB ADV 12 000 BPH THE RINSER WAS MADE BY ITALIAN WAB IN YEAR 2003 AND IT HAS CAPACITY OF 12 000 BPH THIS MACHINE HAS A SPECIAL GRIP WHICH ALLOWS TO WORK WITH BOTH PET AND GLASS BOTTLES. IT IS DESIGNED TO RINSE BOTTLES INSIDE WITH WATER OR SPECIFIC DETERGENTS WITH ADJUSTABLE CONCENTRATION. AS AN OPTION, MACHINE IS EQUIPPED WITH RINSING WATER FILTRATION SYSTEM WHICH PROTECTS AND AVOIDS DIRTY WATER PENETRATION IN TO RINSING SYSTEM. FOR EASY OPERATION AND FORMAT CHANGE, MACHINE IS EQUIPPED WITH ELECTRONIC CAROUSEL HEIGHT ADJUSTMENT. THE RINSER IN DISMANTLED AND IN GOOD CONDITION. TECHNICAL DESCRIPTION SUITABLE FOR: GLASS AND PET BOTTLES MANUFACTURER: WAB (ITALY) MANUFACTURING YEAR: 2003 MODEL: ADV 1R+1S 7-35-125-107 NUMBER OF RINSING HEADS: 35 MAXIMUM PITCH: 125 MM CAPACITY: 12 000 BPH USED FOR BOTTLE SIZES: 350 - 1000 ML BOTTLE DIAMETERS USED: 58.2 - 79.5 MM BOTLLE HEIGHTS USED: 214 - 355 MM RINSING TEMPERATURE MIN: 10 C - MAX 40 C DEGREES SERIAL NR: C646/35 ADV ELECTRICITY: 220V / 50 HZ INSTALLED POWER: 9,5 KVA
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 1.500 €
Ubicación: Land-weight approx.: 400 kg<br/>dimensions (l x w x h) approx.: 1200 x 1100 x 1700 mm<br/>description: becar l.t.u. long belt sander becar l.t.u.<br> designed to sand flat and round surfaces on any type of turned bar<br> vertical stroke of the table 140 mm<br> electrical connection of 380 v<br> motor power 1.1 kw-980 rpm WEIGHT APPROX.: 400 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 1100 X 1700 MM
DESCRIPTION: BECAR L.T.U. LONG BELT SANDER BECAR L.T.U.
DESIGNED TO SAND FLAT AND ROUND SURFACES ON ANY TYPE OF TURNED BAR
VERTICAL STROKE OF THE TABLE 140 MM
ELECTRICAL CONNECTION OF 380 V
MOTOR POWER 1.1 KW-980 RPM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-dewatering station with membrane filter press for kieselguhr sludge
 
this complete dewatering station was designed by limburg for kieselguhr waste dewatering in to semidry cakes for easy waste disposal. the process is suitable also for dewatering other type of sludges. actual dewatering is made with latham side bar membrane filter press which reaches over 50 % dry (by weight) content of waste cake, inlet sludge being between 10 and 20 % dry content filter press is equipped with an automatic cloth washing system and an automatic cake discharge. shaker bars for discharge and plate opening and closing functions are hydraulically operated (limburg cake release control system). cloth washing is made in cycles and during the wash cycle, wash arm will individually wash one chamber at a time. process includes a sludge tank with agitation, sludge and water pumps, filtrate water tank with pump, filter press with auxiliaries, supporting structures and control cabinet with siemens simatic s 7-400 plc and siemens op 7 display. equipment was delivered in year 2000 and it is still installed and in good operational condition.
 
technical data:
made by: limburg – latham
made in year: 2000
inlet sludge dry content: 10 – 20%
capacity: max 3600 kg dry product / 24 hours
cake dry content: > 50% by weight
filtrate dry solid content: < 2 % by weight
latham filter press: side bar membrane 630
total filter area: 6.9 m2
total chamber volume: 99.8 dm3
plate size: 630 mm
working pressure: 7 barg
number of chambers: 12 (expandable to 15)
plate transport: automatic, multiple cake discharge
membrane filtration pump: 159 litres / min
sludge tank: 6 m3, aisi 316l
sludge tank agitator: 0.75 kw, 80 rpm, blade 660 mm
sludge pump capacity: 511 litres / min
filtrate tank: 1.5 m3, aisi 316l   DEWATERING STATION WITH MEMBRANE FILTER PRESS FOR KIESELGUHR SLUDGE THIS COMPLETE DEWATERING STATION WAS DESIGNED BY LIMBURG FOR KIESELGUHR WASTE DEWATERING IN TO SEMIDRY CAKES FOR EASY WASTE DISPOSAL. THE PROCESS IS SUITABLE ALSO FOR DEWATERING OTHER TYPE OF SLUDGES. ACTUAL DEWATERING IS MADE WITH LATHAM SIDE BAR MEMBRANE FILTER PRESS WHICH REACHES OVER 50 % DRY (BY WEIGHT) CONTENT OF WASTE CAKE, INLET SLUDGE BEING BETWEEN 10 AND 20 % DRY CONTENT FILTER PRESS IS EQUIPPED WITH AN AUTOMATIC CLOTH WASHING SYSTEM AND AN AUTOMATIC CAKE DISCHARGE. SHAKER BARS FOR DISCHARGE AND PLATE OPENING AND CLOSING FUNCTIONS ARE HYDRAULICALLY OPERATED (LIMBURG CAKE RELEASE CONTROL SYSTEM). CLOTH WASHING IS MADE IN CYCLES AND DURING THE WASH CYCLE, WASH ARM WILL INDIVIDUALLY WASH ONE CHAMBER AT A TIME. PROCESS INCLUDES A SLUDGE TANK WITH AGITATION, SLUDGE AND WATER PUMPS, FILTRATE WATER TANK WITH PUMP, FILTER PRESS WITH AUXILIARIES, SUPPORTING STRUCTURES AND CONTROL CABINET WITH SIEMENS SIMATIC S 7-400 PLC AND SIEMENS OP 7 DISPLAY. EQUIPMENT WAS DELIVERED IN YEAR 2000 AND IT IS STILL INSTALLED AND IN GOOD OPERATIONAL CONDITION. TECHNICAL DATA: MADE BY: LIMBURG – LATHAM MADE IN YEAR: 2000 INLET SLUDGE DRY CONTENT: 10 – 20% CAPACITY: MAX 3600 KG DRY PRODUCT / 24 HOURS CAKE DRY CONTENT: > 50% BY WEIGHT FILTRATE DRY SOLID CONTENT: < 2 % BY WEIGHT LATHAM FILTER PRESS: SIDE BAR MEMBRANE 630 TOTAL FILTER AREA: 6.9 M2 TOTAL CHAMBER VOLUME: 99.8 DM3 PLATE SIZE: 630 MM WORKING PRESSURE: 7 BARG NUMBER OF CHAMBERS: 12 (EXPANDABLE TO 15) PLATE TRANSPORT: AUTOMATIC, MULTIPLE CAKE DISCHARGE MEMBRANE FILTRATION PUMP: 159 LITRES / MIN SLUDGE TANK: 6 M3, AISI 316L SLUDGE TANK AGITATOR: 0.75 KW, 80 RPM, BLADE 660 MM SLUDGE PUMP CAPACITY: 511 LITRES / MIN FILTRATE TANK: 1.5 M3, AISI 316L
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-<br/><br/>1 used tool grinder amada togu-iii  technical data of togu-eun for reference: tool diameter max. 160 mm tool height: 150 mm (via three-jaw chuck) sanding adjustment: 0.99 mm grinding motor infeed: 240 mm rapid traverse speed: 600 mm / min grinding speed: 0.06 mm / min coolant tank: 20 l coolant pump: 0.26 kw engine: 1.5 kw weight: 480 kg  manufacture description of the togu-eun as reference: automatic high quality grinding machine type : other all punch operators know the importance of tool maintenance on part quality and tool life. the amada togu is the solution; an automatic tool grinder design specifically for high quality grinding of sheet metal tooling. · unmanned operation · simple operator control · quick, reliable grinding of all standard tooling · supplied with jigs for shear angle grinding · restores tooling to optimum condition resulting in high quality parts · enables regular regrinding to maximise tool life

1 USED TOOL GRINDER AMADA TOGU-III TECHNICAL DATA OF TOGU-EUN FOR REFERENCE: TOOL DIAMETER MAX. 160 MM TOOL HEIGHT: 150 MM (VIA THREE-JAW CHUCK) SANDING ADJUSTMENT: 0.99 MM GRINDING MOTOR INFEED: 240 MM RAPID TRAVERSE SPEED: 600 MM / MIN GRINDING SPEED: 0.06 MM / MIN COOLANT TANK: 20 L COOLANT PUMP: 0.26 KW ENGINE: 1.5 KW WEIGHT: 480 KG MANUFACTURE DESCRIPTION OF THE TOGU-EUN AS REFERENCE: AUTOMATIC HIGH QUALITY GRINDING MACHINE TYPE : OTHER ALL PUNCH OPERATORS KNOW THE IMPORTANCE OF TOOL MAINTENANCE ON PART QUALITY AND TOOL LIFE. THE AMADA TOGU IS THE SOLUTION; AN AUTOMATIC TOOL GRINDER DESIGN SPECIFICALLY FOR HIGH QUALITY GRINDING OF SHEET METAL TOOLING. · UNMANNED OPERATION · SIMPLE OPERATOR CONTROL · QUICK, RELIABLE GRINDING OF ALL STANDARD TOOLING · SUPPLIED WITH JIGS FOR SHEAR ANGLE GRINDING · RESTORES TOOLING TO OPTIMUM CONDITION RESULTING IN HIGH QUALITY PARTS · ENABLES REGULAR REGRINDING TO MAXIMISE TOOL LIFE
Vendedor: SALING Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-tunnel pasteurizer double deck sasib pama 6512 dr, 90.000 bph
 
this is two deck design tunnel pasteurizer was made by sasib (now sidel) in 1998 and it was refurbished in 2012. this pasteurizer features the walking beam conveyor system, which is very reliable when handling fragile bottles and when working in high temperatures. the pasteurizer has total of 7 zones and it is two deck design. in- and out-feed conveyors are included in the delivery.
 
technical information
manufacturer: sasib beverage s.p.a.
type: pama 6512 dr
manufacturing year: 1998
number of zones: 7
capacity: 0.20 liters 2 x 47 000 bph
capacity: 0.66 liters 2 x 45 000 bph
control plc: siemens simatic s7 with touch screen
serial nr.: paf 194   TUNNEL PASTEURIZER DOUBLE DECK SASIB PAMA 6512 DR, 90.000 BPH THIS IS TWO DECK DESIGN TUNNEL PASTEURIZER WAS MADE BY SASIB (NOW SIDEL) IN 1998 AND IT WAS REFURBISHED IN 2012. THIS PASTEURIZER FEATURES THE WALKING BEAM CONVEYOR SYSTEM, WHICH IS VERY RELIABLE WHEN HANDLING FRAGILE BOTTLES AND WHEN WORKING IN HIGH TEMPERATURES. THE PASTEURIZER HAS TOTAL OF 7 ZONES AND IT IS TWO DECK DESIGN. IN- AND OUT-FEED CONVEYORS ARE INCLUDED IN THE DELIVERY. TECHNICAL INFORMATION MANUFACTURER: SASIB BEVERAGE S.P.A. TYPE: PAMA 6512 DR MANUFACTURING YEAR: 1998 NUMBER OF ZONES: 7 CAPACITY: 0.20 LITERS 2 X 47 000 BPH CAPACITY: 0.66 LITERS 2 X 45 000 BPH CONTROL PLC: SIEMENS SIMATIC S7 WITH TOUCH SCREEN SERIAL NR.: PAF 194
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 29.200 EU€
Ubicación: Land-cnc lathe - a numerically controlled machine tool designed for machining objects most often with a surface of solids (shafts, cones, balls, internal and external threads). the machining tool is most often a turning tool, a drill bit or threading tools, additionally two tools with a separate one drive. the gang tool system consists in the application of many tools permanently installed in the lathe and their use during the production process. machining on a lathe is called turning. turning is performed by turning the workpiece into a rotary motion, and then cutting its surface with a machining tool. the workpiece is fastened for this purpose in the holder with the use of various frames, provided that the workpiece has a diameter of no more than 32 mm. CNC LATHE - A NUMERICALLY CONTROLLED MACHINE TOOL DESIGNED FOR MACHINING OBJECTS MOST OFTEN WITH A SURFACE OF SOLIDS (SHAFTS, CONES, BALLS, INTERNAL AND EXTERNAL THREADS). THE MACHINING TOOL IS MOST OFTEN A TURNING TOOL, A DRILL BIT OR THREADING TOOLS, ADDITIONALLY TWO TOOLS WITH A SEPARATE ONE DRIVE. THE GANG TOOL SYSTEM CONSISTS IN THE APPLICATION OF MANY TOOLS PERMANENTLY INSTALLED IN THE LATHE AND THEIR USE DURING THE PRODUCTION PROCESS. MACHINING ON A LATHE IS CALLED TURNING. TURNING IS PERFORMED BY TURNING THE WORKPIECE INTO A ROTARY MOTION, AND THEN CUTTING ITS SURFACE WITH A MACHINING TOOL. THE WORKPIECE IS FASTENED FOR THIS PURPOSE IN THE HOLDER WITH THE USE OF VARIOUS FRAMES, PROVIDED THAT THE WORKPIECE HAS A DIAMETER OF NO MORE THAN 32 MM.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-with the compact cable peeling machine maxi 100 cable with diameter from 6 up to 90 mm can be processed. the cable insulation is cut by the proven two blade system and the copper or aluminum core can be easily removed.

the machine is infinitely adjustable via a hand crank on all cable diameter. the cutting depth of the blade (sheath) is also adjustable, allowing the processing of different cable types (e.g. triangle wires from power cable with a lead sheath...

complete intrusion protection, foot switch, modern design, new: with introducer channel

technical data
diameter cable: 6 mm to 90 mm
number of blades: 2
cutting speed: approx. 22 m / min
propulsion: 2 electric motors, 2 x 1.1 kw / 380v 50 hz
dimensions: l b 1850 x 760 x h. 1200 mm
weight: approx. 240 kg WITH THE COMPACT CABLE PEELING MACHINE MAXI 100 CABLE WITH DIAMETER FROM 6 UP TO 90 MM CAN BE PROCESSED. THE CABLE INSULATION IS CUT BY THE PROVEN TWO BLADE SYSTEM AND THE COPPER OR ALUMINUM CORE CAN BE EASILY REMOVED. THE MACHINE IS INFINITELY ADJUSTABLE VIA A HAND CRANK ON ALL CABLE DIAMETER. THE CUTTING DEPTH OF THE BLADE (SHEATH) IS ALSO ADJUSTABLE, ALLOWING THE PROCESSING OF DIFFERENT CABLE TYPES (E.G. TRIANGLE WIRES FROM POWER CABLE WITH A LEAD SHEATH... COMPLETE INTRUSION PROTECTION, FOOT SWITCH, MODERN DESIGN, NEW: WITH INTRODUCER CHANNEL TECHNICAL DATA DIAMETER CABLE: 6 MM TO 90 MM NUMBER OF BLADES: 2 CUTTING SPEED: APPROX. 22 M / MIN PROPULSION: 2 ELECTRIC MOTORS, 2 X 1.1 KW / 380V 50 HZ DIMENSIONS: L B 1850 X 760 X H. 1200 MM WEIGHT: APPROX. 240 KG
Vendedor: AGICOM-Pedergnana OG
Año de construcción: usado
Ubicación: Land-x-travel: 750 mm<br/>y-travel: 560 mm<br/>z-travel: 600 mm<br/>control: heidenhain itnc 530 <br/>total power requirement: 70 kw<br/>weight of the machine ca.: 11.000 kg<br/>dimensions of the machine ca.:  m<br/>d e c k e l   m a h o      (germany)<br/>vertical cnc machining centre with high speed linear drives <br/>in 3 axis and in double column design for high precision work<br/>model  dmc 75 v linear                         year      2005<br/>_______________________________________________________                          <br/><br/>working range: longitudinal stroke x axis                      750    mm<br/>               vertical stroke     z axis                      600    mm<br/>               cross stroke        y axis                      560    mm<br/><br/>table clamping size                                      950 x 650    mm<br/>max. table load                                              1.000    kg<br/>max. height of workpiece                                       600    mm<br/><br/>tool holder cone                                            hsk 63<br/>spindle (kessler) speeds                                    18,000    rpm<br/>torque, max.                                                86/130    nm<br/>spindle run-up time / stop time                                3.2    sec<br/><br/>feeds / quickfeeds, x, y and z axes max.                    90,000    mm/min<br/>feed force                                            11.000/9.500    n<br/>axis acceleration, x / y / z axes                     15 / 12 / 18    m/s<br/><br/>spindle drive                     25/35    kw<br/>total electrical load, approx.       75    kw  -  400 v  -  50    hz<br/>weight, approx.                  11.000    kg<br/><br/>accessories / special features:<br/><br/>this machine is very interesting because of the very stable double column <br/>portal design and with the modern linear technology for fast and powerful <br/>high precision work.<br/> <br/>*   heidenhain modern  cnc control system model itnc 530 in 3 axes, with all <br/>    the usual options, cycles and sub programmes.<br/>*   table moves only in x axis and allows a comfortable loading of heavy <br/>    workpieces<br/>*   30-position disktype tool magazine for max. tool Ø 100, 140 and 200 mm x max. <br/>    length 300 mm.  max. weight 10 kg.  cut-to-cut time 6 sec. pick-up by <br/>    main spindle.<br/>*   blum tool-breakage control, blum receiver for renishaw ?head, no head <br/>    available.<br/>*   double linear motors ensure very fast feed motions and strong feed power, <br/>    equipped with own cooling system.<br/>*   kessler milling spindle, liquid-cooled, steplessly programmable up to 18.000 rpm <br/>*   completely covered working area with 2 sliding doors, one with spin-type bull-eye.<br/>*   knoll coolant device with scraper-type chip conveyor and pressure pomp.<br/>*   spindle working hours approx. 23.000  h<br/><br/>condition   :     very good.  machine can soon be inspected under power.<br/>delivery    :     ex stock, as inspected.            <br/>payment     :     net, after conclusion of contract.<br/><br/><br/><br/><br/><br/> X-TRAVEL: 750 MM
Y-TRAVEL: 560 MM
Z-TRAVEL: 600 MM
CONTROL: HEIDENHAIN ITNC 530
TOTAL POWER REQUIREMENT: 70 KW
WEIGHT OF THE MACHINE CA.: 11.000 KG
DIMENSIONS OF THE MACHINE CA.: M
D E C K E L M A H O (GERMANY)
VERTICAL CNC MACHINING CENTRE WITH HIGH SPEED LINEAR DRIVES
IN 3 AXIS AND IN DOUBLE COLUMN DESIGN FOR HIGH PRECISION WORK
MODEL DMC 75 V LINEAR YEAR 2005
_______________________________________________________

WORKING RANGE: LONGITUDINAL STROKE X AXIS 750 MM
VERTICAL STROKE Z AXIS 600 MM
CROSS STROKE Y AXIS 560 MM

TABLE CLAMPING SIZE 950 X 650 MM
MAX. TABLE LOAD 1.000 KG
MAX. HEIGHT OF WORKPIECE 600 MM

TOOL HOLDER CONE HSK 63
SPINDLE (KESSLER) SPEEDS 18,000 RPM
TORQUE, MAX. 86/130 NM
SPINDLE RUN-UP TIME / STOP TIME 3.2 SEC

FEEDS / QUICKFEEDS, X, Y AND Z AXES MAX. 90,000 MM/MIN
FEED FORCE 11.000/9.500 N
AXIS ACCELERATION, X / Y / Z AXES 15 / 12 / 18 M/S

SPINDLE DRIVE 25/35 KW
TOTAL ELECTRICAL LOAD, APPROX. 75 KW - 400 V - 50 HZ
WEIGHT, APPROX. 11.000 KG

ACCESSORIES / SPECIAL FEATURES:

THIS MACHINE IS VERY INTERESTING BECAUSE OF THE VERY STABLE DOUBLE COLUMN
PORTAL DESIGN AND WITH THE MODERN LINEAR TECHNOLOGY FOR FAST AND POWERFUL
HIGH PRECISION WORK.

* HEIDENHAIN MODERN CNC CONTROL SYSTEM MODEL ITNC 530 IN 3 AXES, WITH ALL
THE USUAL OPTIONS, CYCLES AND SUB PROGRAMMES.
* TABLE MOVES ONLY IN X AXIS AND ALLOWS A COMFORTABLE LOADING OF HEAVY
WORKPIECES
* 30-POSITION DISKTYPE TOOL MAGAZINE FOR MAX. TOOL Ø 100, 140 AND 200 MM X MAX.
LENGTH 300 MM. MAX. WEIGHT 10 KG. CUT-TO-CUT TIME 6 SEC. PICK-UP BY
MAIN SPINDLE.
* BLUM TOOL-BREAKAGE CONTROL, BLUM RECEIVER FOR RENISHAW ?HEAD, NO HEAD
AVAILABLE.
* DOUBLE LINEAR MOTORS ENSURE VERY FAST FEED MOTIONS AND STRONG FEED POWER,
EQUIPPED WITH OWN COOLING SYSTEM.
* KESSLER MILLING SPINDLE, LIQUID-COOLED, STEPLESSLY PROGRAMMABLE UP TO 18.000 RPM
* COMPLETELY COVERED WORKING AREA WITH 2 SLIDING DOORS, ONE WITH SPIN-TYPE BULL-EYE.
* KNOLL COOLANT DEVICE WITH SCRAPER-TYPE CHIP CONVEYOR AND PRESSURE POMP.
* SPINDLE WORKING HOURS APPROX. 23.000 H

CONDITION : VERY GOOD. MACHINE CAN SOON BE INSPECTED UNDER POWER.
DELIVERY : EX STOCK, AS INSPECTED.
PAYMENT : NET, AFTER CONCLUSION OF CONTRACT.





Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Precio: 450 €
Ubicación: Land-it is a used wabäma bread gate type signa 460.10 (year 2000) for sale. the machine is in the state of the bakery and functional.
a video can be sent on request.  IT IS A USED WABäMA BREAD GATE TYPE SIGNA 460.10 (YEAR 2000) FOR SALE. THE MACHINE IS IN THE STATE OF THE BAKERY AND FUNCTIONAL. A VIDEO CAN BE SENT ON REQUEST.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Precio: used machinery auction RESALE 60 €
Ubicación: Land-weight approx.: 90 kg<br/>dimensions (l x w x h) approx.: 770 x 310 x 2000 mm<br/>description: in total 4 shelves with various contents: cable ducts, enerpac spare part (skate) er-10, 2 pcs. es-10, 2 small part racks with various cable shoes, different designs and types WEIGHT APPROX.: 90 KG
DIMENSIONS (L X W X H) APPROX.: 770 X 310 X 2000 MM
DESCRIPTION: IN TOTAL 4 SHELVES WITH VARIOUS CONTENTS: CABLE DUCTS, ENERPAC SPARE PART (SKATE) ER-10, 2 PCS. ES-10, 2 SMALL PART RACKS WITH VARIOUS CABLE SHOES, DIFFERENT DESIGNS AND TYPES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-pilot spinning extrision line designed by fourne 
to make trials of polyester and polyamides, mono & multifilament.

type : ex 25 - 25 d
max. throughput : ca. 7,0 kg/h (pa6), ca. 5,6 kg/h ( pp ), ca. 8,2 kg/h ( pet )
spinbeam /melt pipe : electrically heated 
spinbeam design : for 1 monfil  or 2 multifilament threadlines
spinpumps       :  1 = 2 x 2.4cc    , 1 = 1 x 2.4 cc ,  1 = 1 x 0.6 cc
spinnerettes    : 42 / 59 / 72
crossflow quench cabinette 

take-up winder  sw4s 
+ 
draw – stand : edmund erdmann  gmbh
type : drawmod  02/380-3/5/6 lm
etc  PILOT SPINNING EXTRISION LINE DESIGNED BY FOURNE TO MAKE TRIALS OF POLYESTER AND POLYAMIDES, MONO & MULTIFILAMENT. TYPE : EX 25 - 25 D MAX. THROUGHPUT : CA. 7,0 KG/H (PA6), CA. 5,6 KG/H ( PP ), CA. 8,2 KG/H ( PET ) SPINBEAM /MELT PIPE : ELECTRICALLY HEATED  SPINBEAM DESIGN : FOR 1 MONFIL  OR 2 MULTIFILAMENT THREADLINES SPINPUMPS  :  1 = 2 X 2.4CC    , 1 = 1 X 2.4 CC ,  1 = 1 X 0.6 CC SPINNERETTES   : 42 / 59 / 72 CROSSFLOW QUENCH CABINETTE TAKE-UP WINDER SW4S + DRAW – STAND : EDMUND ERDMANN  GMBH TYPE : DRAWMOD  02/380-3/5/6 LM ETC
Vendedor: Hil-Diolen Polymers GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 60 €
Ubicación: Land-weight approx.: 8 kg<br/>dimensions (l x w x h) approx.: 350 x 300 x 350 mm<br/>description: different manufacturers and designs, hand chisel, brushes, straight grinder WEIGHT APPROX.: 8 KG
DIMENSIONS (L X W X H) APPROX.: 350 X 300 X 350 MM
DESCRIPTION: DIFFERENT MANUFACTURERS AND DESIGNS, HAND CHISEL, BRUSHES, STRAIGHT GRINDER
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cct fermenting tank 10 x 1200 hl dizio

conical cone fermenting tanks (cct) with gross capacity 1200 hl and net 1016 hl. all tanks are identical, made by italian dizio costruccioni meccaniche s.p.a - all made in year 1987. tanks are vertical outdoor type with 150 mm pu insulation, designed for seismic zone 2, supported from the bottom ring (no legs), with three (glycol) cooling zones, two on the side + cone. tanks have mechanical cooling control as well as product handling valve system. generally tanks are in good condition and they have a high hygienic level.

technical data
made by: dizio
made in year: 1987
number of tanks: 10 pcs
type: outdoor vertical
insulation: 150 mm pu
volume gross / net: 1200 / 1016 hl
design pressure: 1.5 bar + statistical pressure
cooling media: glycol - water solution
cooling zones: 3 (including cone)
tank inner diameter: 4800 mm
total height: approx 10.5 m   CCT FERMENTING TANK 10 X 1200 HL DIZIO CONICAL CONE FERMENTING TANKS (CCT) WITH GROSS CAPACITY 1200 HL AND NET 1016 HL. ALL TANKS ARE IDENTICAL, MADE BY ITALIAN DIZIO COSTRUCCIONI MECCANICHE S.P.A - ALL MADE IN YEAR 1987. TANKS ARE VERTICAL OUTDOOR TYPE WITH 150 MM PU INSULATION, DESIGNED FOR SEISMIC ZONE 2, SUPPORTED FROM THE BOTTOM RING (NO LEGS), WITH THREE (GLYCOL) COOLING ZONES, TWO ON THE SIDE + CONE. TANKS HAVE MECHANICAL COOLING CONTROL AS WELL AS PRODUCT HANDLING VALVE SYSTEM. GENERALLY TANKS ARE IN GOOD CONDITION AND THEY HAVE A HIGH HYGIENIC LEVEL. TECHNICAL DATA MADE BY: DIZIO MADE IN YEAR: 1987 NUMBER OF TANKS: 10 PCS TYPE: OUTDOOR VERTICAL INSULATION: 150 MM PU VOLUME GROSS / NET: 1200 / 1016 HL DESIGN PRESSURE: 1.5 BAR + STATISTICAL PRESSURE COOLING MEDIA: GLYCOL - WATER SOLUTION COOLING ZONES: 3 (INCLUDING CONE) TANK INNER DIAMETER: 4800 MM TOTAL HEIGHT: APPROX 10.5 M
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 70 €
Ubicación: Land-weight approx.: 14 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 350 mm<br/>description: different manufacturers and designs, various attachments (chisel) WEIGHT APPROX.: 14 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 350 MM
DESCRIPTION: DIFFERENT MANUFACTURERS AND DESIGNS, VARIOUS ATTACHMENTS (CHISEL)
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-fermenting tank cct 910 hl holvrieka / dizio

conical cone fermenting tanks (cct) with gross capacity 910 hl and net 800 hl. all tanks are identical, made either by hovrieka or by italian dizio costruccioni meccaniche s.p.a - all made in year 1987. tanks are vertical outdoor type with 150 mm pu insulation, designed for seismic zone 2, supported from the bottom ring (no legs), with three (glycol) cooling zones, two on the side + cone. tanks have mechanical cooling control as well as product handling valve system and outside on tank skirt, there are two sample taking valves. the cones has been refurbished / modernized by changing sample taking valve and adding level sensor. generally tanks are in good condition and they have a high hygienic level.

technical data
made by: holvrieka / dizio
made in year: 1987
number of tanks: 36 pcs
type: outdoor vertical
insulation: 150 mm pu
volume gross / net: 910 / 800 hl
design pressure: 1.5 bar + statistical pressure
cooling media: glycol - water solution
cooling zones: 3 (including cone)
tank inner diameter: 4800 mm
total height: 9775 mm   FERMENTING TANK CCT 910 HL HOLVRIEKA / DIZIO CONICAL CONE FERMENTING TANKS (CCT) WITH GROSS CAPACITY 910 HL AND NET 800 HL. ALL TANKS ARE IDENTICAL, MADE EITHER BY HOVRIEKA OR BY ITALIAN DIZIO COSTRUCCIONI MECCANICHE S.P.A - ALL MADE IN YEAR 1987. TANKS ARE VERTICAL OUTDOOR TYPE WITH 150 MM PU INSULATION, DESIGNED FOR SEISMIC ZONE 2, SUPPORTED FROM THE BOTTOM RING (NO LEGS), WITH THREE (GLYCOL) COOLING ZONES, TWO ON THE SIDE + CONE. TANKS HAVE MECHANICAL COOLING CONTROL AS WELL AS PRODUCT HANDLING VALVE SYSTEM AND OUTSIDE ON TANK SKIRT, THERE ARE TWO SAMPLE TAKING VALVES. THE CONES HAS BEEN REFURBISHED / MODERNIZED BY CHANGING SAMPLE TAKING VALVE AND ADDING LEVEL SENSOR. GENERALLY TANKS ARE IN GOOD CONDITION AND THEY HAVE A HIGH HYGIENIC LEVEL. TECHNICAL DATA MADE BY: HOLVRIEKA / DIZIO MADE IN YEAR: 1987 NUMBER OF TANKS: 36 PCS TYPE: OUTDOOR VERTICAL INSULATION: 150 MM PU VOLUME GROSS / NET: 910 / 800 HL DESIGN PRESSURE: 1.5 BAR + STATISTICAL PRESSURE COOLING MEDIA: GLYCOL - WATER SOLUTION COOLING ZONES: 3 (INCLUDING CONE) TANK INNER DIAMETER: 4800 MM TOTAL HEIGHT: 9775 MM
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 70 €
Ubicación: Land-weight approx.: 140 kg<br/>dimensions (l x w x h) approx.: 2200 x 1500 x 300 mm<br/>description: approx. 2 rm, equipped with screws, different sizes, designs, etc. WEIGHT APPROX.: 140 KG
DIMENSIONS (L X W X H) APPROX.: 2200 X 1500 X 300 MM
DESCRIPTION: APPROX. 2 RM, EQUIPPED WITH SCREWS, DIFFERENT SIZES, DESIGNS, ETC.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-injection molding machine husky hylectric h300 for pet bottle closures
 
two complete pet bottle cap production lines both equipped with husky hylectric h300 injection molding machines. both production lines include italian plastic systems made granule pneumatic transport, mixing and feeding systems as well as green box made cap cooling drums. equipment was manufactured in year 2006 is designed to produce 28 mm pet caps according to standard light bpf 28 mm at speed of 36 000 caps / hour. both machines were stopped in 2014 but are still installed and powered.
 
technical data
 
machine #1 type: husky h300, rs95/80, ser. ?2853225
manufacturing year 2006, total operating hours 44918
mold no1 corvaglia 64 cavity no 28-22-21-1 air cooled

machine #2 type: husky h300, rs80/70, ser. ?3372564
manufacturing year 2006, total operating hours 57790
mold no 2 corvaglia 64 cavity no 103-a-st water cooled

cap format bpf 28 mm
cycle time: 6.3 seconds
capacity 36 000 cap / h
control system: beckfoff industrial pc
mmi polaris ttc 2100 with touch screen   INJECTION MOLDING MACHINE HUSKY HYLECTRIC H300 FOR PET BOTTLE CLOSURES TWO COMPLETE PET BOTTLE CAP PRODUCTION LINES BOTH EQUIPPED WITH HUSKY HYLECTRIC H300 INJECTION MOLDING MACHINES. BOTH PRODUCTION LINES INCLUDE ITALIAN PLASTIC SYSTEMS MADE GRANULE PNEUMATIC TRANSPORT, MIXING AND FEEDING SYSTEMS AS WELL AS GREEN BOX MADE CAP COOLING DRUMS. EQUIPMENT WAS MANUFACTURED IN YEAR 2006 IS DESIGNED TO PRODUCE 28 MM PET CAPS ACCORDING TO STANDARD LIGHT BPF 28 MM AT SPEED OF 36 000 CAPS / HOUR. BOTH MACHINES WERE STOPPED IN 2014 BUT ARE STILL INSTALLED AND POWERED. TECHNICAL DATA MACHINE #1 TYPE: HUSKY H300, RS95/80, SER. ?2853225 MANUFACTURING YEAR 2006, TOTAL OPERATING HOURS 44918 MOLD NO1 CORVAGLIA 64 CAVITY NO 28-22-21-1 AIR COOLED MACHINE #2 TYPE: HUSKY H300, RS80/70, SER. ?3372564 MANUFACTURING YEAR 2006, TOTAL OPERATING HOURS 57790 MOLD NO 2 CORVAGLIA 64 CAVITY NO 103-A-ST WATER COOLED CAP FORMAT BPF 28 MM CYCLE TIME: 6.3 SECONDS CAPACITY 36 000 CAP / H CONTROL SYSTEM: BECKFOFF INDUSTRIAL PC MMI POLARIS TTC 2100 WITH TOUCH SCREEN
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 22.000 EU€
Ubicación: Land-the machine is designed for eco-friendly removal of paints and contaminants using a spray of baking soda in various granulations. possibility to use other cleaners - glass, corundum, sand, etc. from the smallest grain granulation (baking soda) to the thickest 2-3 mm. smooth regulation of cleaning power, with surface smooth and rough, without damage. waste throws dry and in water-free modes, hydrodynamically and in a water mix. round nozzles from size # 3 to # 4 and flat nozzles are possible. construction of a carbon and brass steel cleaner, grooved palette. THE MACHINE IS DESIGNED FOR ECO-FRIENDLY REMOVAL OF PAINTS AND CONTAMINANTS USING A SPRAY OF BAKING SODA IN VARIOUS GRANULATIONS. POSSIBILITY TO USE OTHER CLEANERS - GLASS, CORUNDUM, SAND, ETC. FROM THE SMALLEST GRAIN GRANULATION (BAKING SODA) TO THE THICKEST 2-3 MM. SMOOTH REGULATION OF CLEANING POWER, WITH SURFACE SMOOTH AND ROUGH, WITHOUT DAMAGE. WASTE THROWS DRY AND IN WATER-FREE MODES, HYDRODYNAMICALLY AND IN A WATER MIX. ROUND NOZZLES FROM SIZE # 3 TO # 4 AND FLAT NOZZLES ARE POSSIBLE. CONSTRUCTION OF A CARBON AND BRASS STEEL CLEANER, GROOVED PALETTE.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-pet bottle filling line for beer and csd krones 22 000 bph with mixer

this complete pet bottle filling line was delivered by krones in year 2002 and it was in operation till 2015. the equipment is designed for beer and carbonated soft drinks and it has been filling the product in to 0.5, 1.5 and 2.0 liter pet bottles. line has a soft drink mixer. all equipment has siemens simatic s7 serie plc controls. line is complete with pet compressor and beverage mixer and it is still installed and powered and in good condition.

main characteristics of this line:
manufacturer: krones ag
capacity: 22 000 bph in 1.5 liter pet
20 000 bph in 2.0 liter pet
28 000 bph in 0.5 liter pet
operation started in year: 2002
operation stopped in year: 2015
container sizes used: 0.5, 1.5 and 2.0 liters
neck standard: pco 1810 - 28 mm
labels: film, hot glue, wrap around + front-back-neck
delivery package format: 3 x 4 shrink wrapped   PET BOTTLE FILLING LINE FOR BEER AND CSD KRONES 22 000 BPH WITH MIXER THIS COMPLETE PET BOTTLE FILLING LINE WAS DELIVERED BY KRONES IN YEAR 2002 AND IT WAS IN OPERATION TILL 2015. THE EQUIPMENT IS DESIGNED FOR BEER AND CARBONATED SOFT DRINKS AND IT HAS BEEN FILLING THE PRODUCT IN TO 0.5, 1.5 AND 2.0 LITER PET BOTTLES. LINE HAS A SOFT DRINK MIXER. ALL EQUIPMENT HAS SIEMENS SIMATIC S7 SERIE PLC CONTROLS. LINE IS COMPLETE WITH PET COMPRESSOR AND BEVERAGE MIXER AND IT IS STILL INSTALLED AND POWERED AND IN GOOD CONDITION. MAIN CHARACTERISTICS OF THIS LINE: MANUFACTURER: KRONES AG CAPACITY: 22 000 BPH IN 1.5 LITER PET 20 000 BPH IN 2.0 LITER PET 28 000 BPH IN 0.5 LITER PET OPERATION STARTED IN YEAR: 2002 OPERATION STOPPED IN YEAR: 2015 CONTAINER SIZES USED: 0.5, 1.5 AND 2.0 LITERS NECK STANDARD: PCO 1810 - 28 MM LABELS: FILM, HOT GLUE, WRAP AROUND + FRONT-BACK-NECK DELIVERY PACKAGE FORMAT: 3 X 4 SHRINK WRAPPED
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-turning diameter: 30 mm<br/>turning length: 270 mm<br/>control: tx 8f <br/>main spindle::  <br/>spindle hollow: 30 mm<br/>max. rpm: 7.000 min/-1<br/>power capacity - main spindel: 7,5 / 11 kw<br/>max. torque: 105 nm<br/>spindle bearing diameter: 65 mm<br/>c - axis: 360 °<br/>subspindel::  <br/>spindle hollow: 26 mm<br/>max. rpm: 7.000 min/-1<br/>power capacity - sub spindle: 3,7 / 5,5 kw<br/>max. torque: 35 nm<br/>traverses subspindle: 330 mm<br/>c - axis: 360 °<br/>tool mount::  <br/>number of turret: 2 <br/>no. of tool upper turret: 12 pos<br/>y - axis: +/- 18 mm<br/>tool positions lower turret: 12 pos<br/>shank diameter: 25 mm<br/>shaft length: 48 mm<br/>cross cut: 16 x 16 mm<br/>change-time chip to chip: ca. 1,2 sec<br/>driven tools::  <br/>number of driven toolspositions: 2 x 12 pos<br/>power capacity - driven tools: 2,6 kw<br/>spindle speed - driven tools: max. 8.000 min -1<br/>max. torque: 4,0 nm<br/>feeds::  <br/>rapid traverse: x:  12 m/min<br/>rapid traverse: z:  15 m/min<br/>rapid traverse: y:  7,5 m/min<br/>feed force: x/z:  3 kn<br/>feed force: y:  5 kn<br/>rapid traverse sub spindle: 24 m/min<br/>feeding force subsindle: 3 kn<br/>total power requirement: 35 kw<br/>weight of the machine ca.: 3,6 t<br/>dimensions of the machine ca.: 7,0 x 2,5 x 1,9 m<br/>documents:  <br/>bar feeder:  <br/>parts catcher:  <br/>coolantsystem:  <br/>signal-light:  <br/>chip conveyor:  <br/>cnc-turning- and milling center<br/>traub - tnc 30 dgy<br/><br/>- incl. bar feeder traub stamag dn 26 <br/><br/><br/><br/><br/> TURNING DIAMETER: 30 MM
TURNING LENGTH: 270 MM
CONTROL: TX 8F
MAIN SPINDLE::
SPINDLE HOLLOW: 30 MM
MAX. RPM: 7.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 7,5 / 11 KW
MAX. TORQUE: 105 NM
SPINDLE BEARING DIAMETER: 65 MM
C - AXIS: 360 °
SUBSPINDEL::
SPINDLE HOLLOW: 26 MM
MAX. RPM: 7.000 MIN/-1
POWER CAPACITY - SUB SPINDLE: 3,7 / 5,5 KW
MAX. TORQUE: 35 NM
TRAVERSES SUBSPINDLE: 330 MM
C - AXIS: 360 °
TOOL MOUNT::
NUMBER OF TURRET: 2
NO. OF TOOL UPPER TURRET: 12 POS
Y - AXIS: +/- 18 MM
TOOL POSITIONS LOWER TURRET: 12 POS
SHANK DIAMETER: 25 MM
SHAFT LENGTH: 48 MM
CROSS CUT: 16 X 16 MM
CHANGE-TIME CHIP TO CHIP: CA. 1,2 SEC
DRIVEN TOOLS::
NUMBER OF DRIVEN TOOLSPOSITIONS: 2 X 12 POS
POWER CAPACITY - DRIVEN TOOLS: 2,6 KW
SPINDLE SPEED - DRIVEN TOOLS: MAX. 8.000 MIN -1
MAX. TORQUE: 4,0 NM
FEEDS::
RAPID TRAVERSE: X: 12 M/MIN
RAPID TRAVERSE: Z: 15 M/MIN
RAPID TRAVERSE: Y: 7,5 M/MIN
FEED FORCE: X/Z: 3 KN
FEED FORCE: Y: 5 KN
RAPID TRAVERSE SUB SPINDLE: 24 M/MIN
FEEDING FORCE SUBSINDLE: 3 KN
TOTAL POWER REQUIREMENT: 35 KW
WEIGHT OF THE MACHINE CA.: 3,6 T
DIMENSIONS OF THE MACHINE CA.: 7,0 X 2,5 X 1,9 M
DOCUMENTS:
BAR FEEDER:
PARTS CATCHER:
COOLANTSYSTEM:
SIGNAL-LIGHT:
CHIP CONVEYOR:
CNC-TURNING- AND MILLING CENTER
TRAUB - TNC 30 DGY

- INCL. BAR FEEDER TRAUB STAMAG DN 26




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-empty bottle inspector heuft inline ebi with reflexx and spectrum tx units
 
the machine was installed in year 2007 and its currently in very good operational condition. the capacity is 72 000 bph. this ebi is designed for class bottles, sizes 0.33 and 0.5 liters. it has heuft pilot cd manuals in english
 
this heuft inline ebi makes the following scans:
for detecting residual material in a bottle it has both hf (high frequency) and if (infra red) detections systems. during hf scanning an electric field is generated in the base area of the container. conductive liquids in a container change this field. even a single drop of lye can be reliably detected with this hf system. the ir detection is based on the absorption of infrared radiation in a liquid. non-conductive material can be detected by a special sensor which measures the infrared radiation which has passed through.
 
sidewall inspection is made rotating bottle full 90 degree and it will be optically examined all around bottle in order to detect all possible contamination and damage. finishing inspection for faults and cracks on the bottle finish wide range of analysis tools for specifically identifying critical faults around the bottle opening. for this led strobes project different colored rings of light from above onto the bottle opening. their reflections are specifically analyzed with an interaction of high-resolution camera technology and high-performance image processing and filter procedures. faulty bottles are removed directly from the production flow. the inspection covers the complete sealing surface of the finish but also the sealing lip, the locking ring and the curved side finish area below it.
 
the ebi has optical heuft thread detection system which inspects the screw closure finish on a glass bottle completely. the system takes a picture of the complete circumference of the closure area with two separate cameras and mirror cabinets. the individual pictures of the different views are then put together and checked for faults.
 
this ebi is equipped with powerful heuft reflexx image processing system which is combining several camera pictures and x-ray images in real time. the heuft inline with heuft reflexx technology offers an optimal fault detection with a minimum false rejection rate. in this way standard glass bottles which contain the following foreign objects are detected with a reliability of 99.9 % and rejected.
 
technical data:
manufacturer: heuft gmbh, germany
year: 2007
type: heuft spectrum tx inline ebi with reflexx image processing and heuft syncron system
capacity: 72 000 bph
reliability: 99.9 % detection complete heuft manuals in english.   EMPTY BOTTLE INSPECTOR HEUFT INLINE EBI WITH REFLEXX AND SPECTRUM TX UNITS THE MACHINE WAS INSTALLED IN YEAR 2007 AND ITS CURRENTLY IN VERY GOOD OPERATIONAL CONDITION. THE CAPACITY IS 72 000 BPH. THIS EBI IS DESIGNED FOR CLASS BOTTLES, SIZES 0.33 AND 0.5 LITERS. IT HAS HEUFT PILOT CD MANUALS IN ENGLISH THIS HEUFT INLINE EBI MAKES THE FOLLOWING SCANS: FOR DETECTING RESIDUAL MATERIAL IN A BOTTLE IT HAS BOTH HF (HIGH FREQUENCY) AND IF (INFRA RED) DETECTIONS SYSTEMS. DURING HF SCANNING AN ELECTRIC FIELD IS GENERATED IN THE BASE AREA OF THE CONTAINER. CONDUCTIVE LIQUIDS IN A CONTAINER CHANGE THIS FIELD. EVEN A SINGLE DROP OF LYE CAN BE RELIABLY DETECTED WITH THIS HF SYSTEM. THE IR DETECTION IS BASED ON THE ABSORPTION OF INFRARED RADIATION IN A LIQUID. NON-CONDUCTIVE MATERIAL CAN BE DETECTED BY A SPECIAL SENSOR WHICH MEASURES THE INFRARED RADIATION WHICH HAS PASSED THROUGH. SIDEWALL INSPECTION IS MADE ROTATING BOTTLE FULL 90 DEGREE AND IT WILL BE OPTICALLY EXAMINED ALL AROUND BOTTLE IN ORDER TO DETECT ALL POSSIBLE CONTAMINATION AND DAMAGE. FINISHING INSPECTION FOR FAULTS AND CRACKS ON THE BOTTLE FINISH WIDE RANGE OF ANALYSIS TOOLS FOR SPECIFICALLY IDENTIFYING CRITICAL FAULTS AROUND THE BOTTLE OPENING. FOR THIS LED STROBES PROJECT DIFFERENT COLORED RINGS OF LIGHT FROM ABOVE ONTO THE BOTTLE OPENING. THEIR REFLECTIONS ARE SPECIFICALLY ANALYZED WITH AN INTERACTION OF HIGH-RESOLUTION CAMERA TECHNOLOGY AND HIGH-PERFORMANCE IMAGE PROCESSING AND FILTER PROCEDURES. FAULTY BOTTLES ARE REMOVED DIRECTLY FROM THE PRODUCTION FLOW. THE INSPECTION COVERS THE COMPLETE SEALING SURFACE OF THE FINISH BUT ALSO THE SEALING LIP, THE LOCKING RING AND THE CURVED SIDE FINISH AREA BELOW IT. THE EBI HAS OPTICAL HEUFT THREAD DETECTION SYSTEM WHICH INSPECTS THE SCREW CLOSURE FINISH ON A GLASS BOTTLE COMPLETELY. THE SYSTEM TAKES A PICTURE OF THE COMPLETE CIRCUMFERENCE OF THE CLOSURE AREA WITH TWO SEPARATE CAMERAS AND MIRROR CABINETS. THE INDIVIDUAL PICTURES OF THE DIFFERENT VIEWS ARE THEN PUT TOGETHER AND CHECKED FOR FAULTS. THIS EBI IS EQUIPPED WITH POWERFUL HEUFT REFLEXX IMAGE PROCESSING SYSTEM WHICH IS COMBINING SEVERAL CAMERA PICTURES AND X-RAY IMAGES IN REAL TIME. THE HEUFT INLINE WITH HEUFT REFLEXX TECHNOLOGY OFFERS AN OPTIMAL FAULT DETECTION WITH A MINIMUM FALSE REJECTION RATE. IN THIS WAY STANDARD GLASS BOTTLES WHICH CONTAIN THE FOLLOWING FOREIGN OBJECTS ARE DETECTED WITH A RELIABILITY OF 99.9 % AND REJECTED. TECHNICAL DATA: MANUFACTURER: HEUFT GMBH, GERMANY YEAR: 2007 TYPE: HEUFT SPECTRUM TX INLINE EBI WITH REFLEXX IMAGE PROCESSING AND HEUFT SYNCRON SYSTEM CAPACITY: 72 000 BPH RELIABILITY: 99.9 % DETECTION COMPLETE HEUFT MANUALS IN ENGLISH.
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-turning diameter: 30 mm<br/>turning length: 270 mm<br/>control: tx 8f <br/>main spindle::  <br/>spindle hollow: 30 mm<br/>max. rpm: 7.000 min/-1<br/>power capacity - main spindel: 7,5 / 11 kw<br/>max. torque: 105 nm<br/>spindle bearing diameter: 65 mm<br/>c - axis: 360 °<br/>subspindel::  <br/>spindle hollow: 26 mm<br/>max. rpm: 7.000 min/-1<br/>power capacity - sub spindle: 3,7 / 5,5 kw<br/>max. torque: 35 nm<br/>traverses subspindle: 330 mm<br/>c - axis: 360 °<br/>tool mount::  <br/>number of turret: 2 <br/>no. of tool upper turret: 12 pos<br/>y - axis: +/- 18 mm<br/>tool positions lower turret: 12 pos<br/>shank diameter: 25 mm<br/>shaft length: 48 mm<br/>cross cut: 16 x 16 mm<br/>change-time chip to chip: ca. 1,2 sec<br/>driven tools::  <br/>number of driven toolspositions: 2 x 12 pos<br/>power capacity - driven tools: 1,5 / 2,6 kw<br/>spindle speed - driven tools: max. 8.000 min -1<br/>max. torque: 4,0 nm<br/>feeds::  <br/>rapid traverse: x:  12 m/min<br/>rapid traverse: z:  15 m/min<br/>rapid traverse: y:  7,5 m/min<br/>feed force: x/z:  3 kn<br/>feed force: y:  5 kn<br/>rapid traverse sub spindle: 24 m/min<br/>feeding force subsindle: 3 kn<br/>total power requirement: 35 kw<br/>weight of the machine ca.: 3,6 t<br/>dimensions of the machine ca.: 7,0 x 2,5 x 1,9 m<br/>documents:  <br/>bar feeder:  <br/>parts catcher:  <br/>coolantsystem:  <br/>signal-light:  <br/>chip conveyor:  <br/>cnc-turning- and milling center<br/>traub - tnc 30 dgy<br/><br/>- incl. bar feeder traub stamag dn 26 <br/><br/><br/><br/><br/> TURNING DIAMETER: 30 MM
TURNING LENGTH: 270 MM
CONTROL: TX 8F
MAIN SPINDLE::
SPINDLE HOLLOW: 30 MM
MAX. RPM: 7.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 7,5 / 11 KW
MAX. TORQUE: 105 NM
SPINDLE BEARING DIAMETER: 65 MM
C - AXIS: 360 °
SUBSPINDEL::
SPINDLE HOLLOW: 26 MM
MAX. RPM: 7.000 MIN/-1
POWER CAPACITY - SUB SPINDLE: 3,7 / 5,5 KW
MAX. TORQUE: 35 NM
TRAVERSES SUBSPINDLE: 330 MM
C - AXIS: 360 °
TOOL MOUNT::
NUMBER OF TURRET: 2
NO. OF TOOL UPPER TURRET: 12 POS
Y - AXIS: +/- 18 MM
TOOL POSITIONS LOWER TURRET: 12 POS
SHANK DIAMETER: 25 MM
SHAFT LENGTH: 48 MM
CROSS CUT: 16 X 16 MM
CHANGE-TIME CHIP TO CHIP: CA. 1,2 SEC
DRIVEN TOOLS::
NUMBER OF DRIVEN TOOLSPOSITIONS: 2 X 12 POS
POWER CAPACITY - DRIVEN TOOLS: 1,5 / 2,6 KW
SPINDLE SPEED - DRIVEN TOOLS: MAX. 8.000 MIN -1
MAX. TORQUE: 4,0 NM
FEEDS::
RAPID TRAVERSE: X: 12 M/MIN
RAPID TRAVERSE: Z: 15 M/MIN
RAPID TRAVERSE: Y: 7,5 M/MIN
FEED FORCE: X/Z: 3 KN
FEED FORCE: Y: 5 KN
RAPID TRAVERSE SUB SPINDLE: 24 M/MIN
FEEDING FORCE SUBSINDLE: 3 KN
TOTAL POWER REQUIREMENT: 35 KW
WEIGHT OF THE MACHINE CA.: 3,6 T
DIMENSIONS OF THE MACHINE CA.: 7,0 X 2,5 X 1,9 M
DOCUMENTS:
BAR FEEDER:
PARTS CATCHER:
COOLANTSYSTEM:
SIGNAL-LIGHT:
CHIP CONVEYOR:
CNC-TURNING- AND MILLING CENTER
TRAUB - TNC 30 DGY

- INCL. BAR FEEDER TRAUB STAMAG DN 26




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-glass bottle filling line 55 000 bph simonazzi / krones for beer with bwm
 
complete returnable glass bottle filling line, nominal capacity of 55 000 bph in 0.5-liter glass bottle. main machinery from krones and simonazzi. the line was installed in 2002 and modernized during the entire time of used, like closed conveyor system in year 2013. empty bottle inspector and level & sealing inspector in year 2007. the line was stopped in year 2014 and it is still installed and powered. line is controlled with siemens simatic s7 plc. equipment is in good condition and very well maintained and it has complete documentation in english.
 
main characteristics of this line
 
main manufacturers krones and sig simonazzi
made in years 2002 - 2007
returnable bottles 0.33 and 0.5 liter glass bottles
product used for beer
capacity 55 000 bph in 0.5 liter bottles
caps crown and ring pull
labels paper front-back-neck
secondary packaging tray format 5 x 4 with shrink plastic  GLASS BOTTLE FILLING LINE 55 000 BPH SIMONAZZI / KRONES FOR BEER WITH BWM COMPLETE RETURNABLE GLASS BOTTLE FILLING LINE, NOMINAL CAPACITY OF 55 000 BPH IN 0.5-LITER GLASS BOTTLE. MAIN MACHINERY FROM KRONES AND SIMONAZZI. THE LINE WAS INSTALLED IN 2002 AND MODERNIZED DURING THE ENTIRE TIME OF USED, LIKE CLOSED CONVEYOR SYSTEM IN YEAR 2013. EMPTY BOTTLE INSPECTOR AND LEVEL & SEALING INSPECTOR IN YEAR 2007. THE LINE WAS STOPPED IN YEAR 2014 AND IT IS STILL INSTALLED AND POWERED. LINE IS CONTROLLED WITH SIEMENS SIMATIC S7 PLC. EQUIPMENT IS IN GOOD CONDITION AND VERY WELL MAINTAINED AND IT HAS COMPLETE DOCUMENTATION IN ENGLISH. MAIN CHARACTERISTICS OF THIS LINE MAIN MANUFACTURERS KRONES AND SIG SIMONAZZI MADE IN YEARS 2002 - 2007 RETURNABLE BOTTLES 0.33 AND 0.5 LITER GLASS BOTTLES PRODUCT USED FOR BEER CAPACITY 55 000 BPH IN 0.5 LITER BOTTLES CAPS CROWN AND RING PULL LABELS PAPER FRONT-BACK-NECK SECONDARY PACKAGING TRAY FORMAT 5 X 4 WITH SHRINK PLASTIC
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 39.000 €
Ubicación: Land-weight approx.: 2500 kg<br/>pressure: 20 to<br/>dimensions (l x w x h) approx.: 1550 x 1800 x 1965 mm<br/>description: <b>this is a demonstration machine in stock!</b><br> ergonomic press brake made of a rigid monoblock frame (mehaanite 700 n/mm²)<br> the machine has a direct drive via servo motor and ball screw which works on tension to avoid deformation.<br> in addition, the machine is equipped with a 6-axis backgauge, a teda quick tool clamp and an iris rapid bend safety device<br> <br> - serial number: fx85610002580<br> - bending capacity: 200 kn<br> - usable bending length: 850 mm<br> - y-axis travel stroke: 1956 mm<br> - y-axis speed: 200 mm/sec<br> - installation height(table to upper bending beam): 470 (395) mm<br> - x axis travel stroke (6 axes x1-x2-r1-r2-z1-z2): 375 mm<br> - r axis travel stroke (6 axes x1-x2-r1-r2-z1-z2: 180 mm<br> - z axis speed (6 axes x1-x2-r1-r2-z1-z2): 744 mm/sec<br> - x axis velocity (6 axes x1-x2-r1-r2-z1-z2): 1000 mm/sec<br> - r axis speed (6 axes x1-x2-r1-r2-z1-z2): 350 mm/sec<br> - z axis speed (6 axes x1-x2-r1-r2-z1-z2): 220 mm/sec<br> - wireless connection / wireless / usb-port: yes / 2<br> - main motor power: 1x5,2 kw<br> - connection power: 5 kwa<br> <br> <b>accessories:</b><br> - top promecam tool holder (without tools) with quick-release lever<br> - below tool holder for amada / promecam and wila plug-in matrices<br> - cnc control panasonic toughbook incl. battery, usb connection and wifi<br> - anti-reflective lcd touchscreen<br> - safety device dual laser<br> - rigid mehaanite monoblock cast iron body tensile strength 700n/mm²<br> - direct drive via servo motor and recirculating ball screw<br> - 2-axle backgauge moves<br> - ergonomic design<br> <br> <b>special accessories:</b><br> teda speed grip quick-change system top, for standard amada/promecam tools<br> 6 axes backgauge x1/x2/r1/r2/z1/z2<br> iris rapid bend, safety device, travels at rapid traverse to the mute point<br> <br> the machine can be transported by forkl WEIGHT APPROX.: 2500 KG
PRESSURE: 20 TO
DIMENSIONS (L X W X H) APPROX.: 1550 X 1800 X 1965 MM
DESCRIPTION: THIS IS A DEMONSTRATION MACHINE IN STOCK!
ERGONOMIC PRESS BRAKE MADE OF A RIGID MONOBLOCK FRAME (MEHAANITE 700 N/MM²)
THE MACHINE HAS A DIRECT DRIVE VIA SERVO MOTOR AND BALL SCREW WHICH WORKS ON TENSION TO AVOID DEFORMATION.
IN ADDITION, THE MACHINE IS EQUIPPED WITH A 6-AXIS BACKGAUGE, A TEDA QUICK TOOL CLAMP AND AN IRIS RAPID BEND SAFETY DEVICE

- SERIAL NUMBER: FX85610002580
- BENDING CAPACITY: 200 KN
- USABLE BENDING LENGTH: 850 MM
- Y-AXIS TRAVEL STROKE: 1956 MM
- Y-AXIS SPEED: 200 MM/SEC
- INSTALLATION HEIGHT(TABLE TO UPPER BENDING BEAM): 470 (395) MM
- X AXIS TRAVEL STROKE (6 AXES X1-X2-R1-R2-Z1-Z2): 375 MM
- R AXIS TRAVEL STROKE (6 AXES X1-X2-R1-R2-Z1-Z2: 180 MM
- Z AXIS SPEED (6 AXES X1-X2-R1-R2-Z1-Z2): 744 MM/SEC
- X AXIS VELOCITY (6 AXES X1-X2-R1-R2-Z1-Z2): 1000 MM/SEC
- R AXIS SPEED (6 AXES X1-X2-R1-R2-Z1-Z2): 350 MM/SEC
- Z AXIS SPEED (6 AXES X1-X2-R1-R2-Z1-Z2): 220 MM/SEC
- WIRELESS CONNECTION / WIRELESS / USB-PORT: YES / 2
- MAIN MOTOR POWER: 1X5,2 KW
- CONNECTION POWER: 5 KWA

ACCESSORIES:
- TOP PROMECAM TOOL HOLDER (WITHOUT TOOLS) WITH QUICK-RELEASE LEVER
- BELOW TOOL HOLDER FOR AMADA / PROMECAM AND WILA PLUG-IN MATRICES
- CNC CONTROL PANASONIC TOUGHBOOK INCL. BATTERY, USB CONNECTION AND WIFI
- ANTI-REFLECTIVE LCD TOUCHSCREEN
- SAFETY DEVICE DUAL LASER
- RIGID MEHAANITE MONOBLOCK CAST IRON BODY TENSILE STRENGTH 700N/MM²
- DIRECT DRIVE VIA SERVO MOTOR AND RECIRCULATING BALL SCREW
- 2-AXLE BACKGAUGE MOVES
- ERGONOMIC DESIGN

SPECIAL ACCESSORIES:
TEDA SPEED GRIP QUICK-CHANGE SYSTEM TOP, FOR STANDARD AMADA/PROMECAM TOOLS
6 AXES BACKGAUGE X1/X2/R1/R2/Z1/Z2
IRIS RAPID BEND, SAFETY DEVICE, TRAVELS AT RAPID TRAVERSE TO THE MUTE POINT

THE MACHINE CAN BE TRANSPORTED BY FORKL
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more SIG types: