40 ofertas

Año de construcción: usado
Ubicación: Land-laundry plant(industrial washing line)

make:japan/korean

 

1.   laundry input machine

make:hankook(korea)

year:2014

capacity:50kg, 0.4kw

table:800mm

dimensions:1.5 x1.6 m x4m(h)

 

2. continuous washing machine

make:tosen(japan)

year:2008

model:arm-50-14

capacity:1000kg/hour

washing cylinder

capacity:50kg x 14 spaces

preliminary washing 3 spaces. 1.5m3

main washing: 6spaces 3m3

rinse:5spaces, 2.5m3

washing time:3minutes

dimensions:2400x12000mmx3500mm(h)

pump and steam pipe:4.5kg/m2

pressure:6kg/m2

motor:18.5kw

 

3.hydraulic type dehydrator

make:mitsubishi(japan)

year:2006

model:hp2000s

pressure:30kg/cm2

dimensions:1500x2400mmx3630mm(h)

motor:15kw

 

4. conveyor

year:2014

width:1040mm

dimensions:1100x1200mmx1000mm(h)

 

5. shuttle conveyor

year:2014

width:1040mm 2stages

dimensions:1100x1200mmx4000mm(h)

motor:1.5kw

hoist;1ton

 

6.automatic dryer x4sets

year:2006

cap;100kg

drum typr, diameter 1100mm

dimensions:1800x2200mmx3050mm(h)

motor;1.5kw

 

7.washing machine

make:asihi(japan)

year:2006

model:eoonomat 100

100kg, 1.0m3

motor:15kw

 

8.washing machine

make:asihi(japan)

year:2006

model:eoonomat 50

500kg, 0.5m3

motor:3.7kw

 

9.roller ironers

make:tosen(japan)

year:2005

model:sgh super 850

600sheets

3 roll type

width;3000mm

temperature:180degree

dimensions:4500x5000x1500mm(h)

 

10.roller ironers

make:tosen(japan)

year:2005

model:tys 103-3300

600sheets

3 roll type

width;3000mm

temperature:180degree

dimensions:4300x3300x2400mm(h)

 

11. sheet hold

make:toto(japan)

year:2005

600sheets

10 roll type

width;3000mm

temperature:180degree

dimensions:4000x2400x1650mm(h)

 

11-1. sheet hold

make:toto(japan)

year:2005

600sheets

10 roll type

width;3000mm

temperature:180degree

dimensions:4000x3000x300mm(h)

 

12.boiler

make:kuungdong(korea)

year:2014

cap;4500kg/h

 

13.compressor

make:hankook machinery(korea)

year:2014

 

15. automatic dryer

make:tosen(japan)

year:2007

cap;100kg

drum typr, diameter 1100mm

dimensions:1800x2200mmx3050mm(h)

motor;1.5kw

 

15. sheet input machine

make:tosen(japan)

purex easy hawk 3

year:2007

cap;400-600sheets/hour

drum typr, diameter 1100mm

dimensions:4800x2800mmx2500mm(h)

motor;1.5kw

 

17 washing machine

make:asihi(japan)

year:2006

model:inamoto flt 200

200kg, depth:1070mm

motor:15kw

 

18. dryer

make:inmato(japan)

year:2007

model:solex df5-200a

cap;200kg

temperature:120-130degree

 

19. dryer

make:inmato(japan)

year:2007

model:dry plo 2

cap;100kg

motor;15kw

 

20. dryer

make:asihi(japan)

year:2007

model:nt50

cap;50kg

temperature:120-130degree

 

21.waste water treatment equipment

make:goryo(korea)

year:2014

150ton/day

 

22.water recycling equipment

make:goryo(korea)

year:2014

150ton/day

 LAUNDRY PLANT(INDUSTRIAL WASHING LINE) MAKE:JAPAN/KOREAN 1. LAUNDRY INPUT MACHINE MAKE:HANKOOK(KOREA) YEAR:2014 CAPACITY:50KG, 0.4KW TABLE:800MM DIMENSIONS:1.5 X1.6 M X4M(H) 2. CONTINUOUS WASHING MACHINE MAKE:TOSEN(JAPAN) YEAR:2008 MODEL:ARM-50-14 CAPACITY:1000KG/HOUR WASHING CYLINDER CAPACITY:50KG X 14 SPACES PRELIMINARY WASHING 3 SPACES. 1.5M3 MAIN WASHING: 6SPACES 3M3 RINSE:5SPACES, 2.5M3 WASHING TIME:3MINUTES DIMENSIONS:2400X12000MMX3500MM(H) PUMP AND STEAM PIPE:4.5KG/M2 PRESSURE:6KG/M2 MOTOR:18.5KW 3.HYDRAULIC TYPE DEHYDRATOR MAKE:MITSUBISHI(JAPAN) YEAR:2006 MODEL:HP2000S PRESSURE:30KG/CM2 DIMENSIONS:1500X2400MMX3630MM(H) MOTOR:15KW 4. CONVEYOR YEAR:2014 WIDTH:1040MM DIMENSIONS:1100X1200MMX1000MM(H) 5. SHUTTLE CONVEYOR YEAR:2014 WIDTH:1040MM 2STAGES DIMENSIONS:1100X1200MMX4000MM(H) MOTOR:1.5KW HOIST;1TON 6.AUTOMATIC DRYER X4SETS YEAR:2006 CAP;100KG DRUM TYPR, DIAMETER 1100MM DIMENSIONS:1800X2200MMX3050MM(H) MOTOR;1.5KW 7.WASHING MACHINE MAKE:ASIHI(JAPAN) YEAR:2006 MODEL:EOONOMAT 100 100KG, 1.0M3 MOTOR:15KW 8.WASHING MACHINE MAKE:ASIHI(JAPAN) YEAR:2006 MODEL:EOONOMAT 50 500KG, 0.5M3 MOTOR:3.7KW 9.ROLLER IRONERS MAKE:TOSEN(JAPAN) YEAR:2005 MODEL:SGH SUPER 850 600SHEETS 3 ROLL TYPE WIDTH;3000MM TEMPERATURE:180DEGREE DIMENSIONS:4500X5000X1500MM(H) 10.ROLLER IRONERS MAKE:TOSEN(JAPAN) YEAR:2005 MODEL:TYS 103-3300 600SHEETS 3 ROLL TYPE WIDTH;3000MM TEMPERATURE:180DEGREE DIMENSIONS:4300X3300X2400MM(H) 11. SHEET HOLD MAKE:TOTO(JAPAN) YEAR:2005 600SHEETS 10 ROLL TYPE WIDTH;3000MM TEMPERATURE:180DEGREE DIMENSIONS:4000X2400X1650MM(H) 11-1. SHEET HOLD MAKE:TOTO(JAPAN) YEAR:2005 600SHEETS 10 ROLL TYPE WIDTH;3000MM TEMPERATURE:180DEGREE DIMENSIONS:4000X3000X300MM(H) 12.BOILER MAKE:KUUNGDONG(KOREA) YEAR:2014 CAP;4500KG/H 13.COMPRESSOR MAKE:HANKOOK MACHINERY(KOREA) YEAR:2014 15. AUTOMATIC DRYER MAKE:TOSEN(JAPAN) YEAR:2007 CAP;100KG DRUM TYPR, DIAMETER 1100MM DIMENSIONS:1800X2200MMX3050MM(H) MOTOR;1.5KW 15. SHEET INPUT MACHINE MAKE:TOSEN(JAPAN) PUREX EASY HAWK 3 YEAR:2007 CAP;400-600SHEETS/HOUR DRUM TYPR, DIAMETER 1100MM DIMENSIONS:4800X2800MMX2500MM(H) MOTOR;1.5KW 17 WASHING MACHINE MAKE:ASIHI(JAPAN) YEAR:2006 MODEL:INAMOTO FLT 200 200KG, DEPTH:1070MM MOTOR:15KW 18. DRYER MAKE:INMATO(JAPAN) YEAR:2007 MODEL:SOLEX DF5-200A CAP;200KG TEMPERATURE:120-130DEGREE 19. DRYER MAKE:INMATO(JAPAN) YEAR:2007 MODEL:DRY PLO 2 CAP;100KG MOTOR;15KW 20. DRYER MAKE:ASIHI(JAPAN) YEAR:2007 MODEL:NT50 CAP;50KG TEMPERATURE:120-130DEGREE 21.WASTE WATER TREATMENT EQUIPMENT MAKE:GORYO(KOREA) YEAR:2014 150TON/DAY 22.WATER RECYCLING EQUIPMENT MAKE:GORYO(KOREA) YEAR:2014 150TON/DAY
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: used machinery auction RESALE 350 €
Ubicación: Land-weight approx.: 500 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 1400 mm<br/>description: sterling flowserve dry vacuum pump sihidry v250<br> 10mbar 240m³/h<br> dry-running pump system sihidry v250 with sterling drive control<br> input: 400v -10% to 500v +10% 3ph max. 25 a at 47 to 63 hz<br> p1: 10 mbar<br> p2: 0,1 bar<br> v: 240 qm/h<br> WEIGHT APPROX.: 500 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 1400 MM
DESCRIPTION: STERLING FLOWSERVE DRY VACUUM PUMP SIHIDRY V250
10MBAR 240M³/H
DRY-RUNNING PUMP SYSTEM SIHIDRY V250 WITH STERLING DRIVE CONTROL
INPUT: 400V -10% TO 500V +10% 3PH MAX. 25 A AT 47 TO 63 HZ
P1: 10 MBAR
P2: 0,1 BAR
V: 240 QM/H
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-new engines from stock ,
610kw@1500 rpm 


  NEW ENGINES FROM STOCK , 610KW@1500 RPM
Vendedor: AMP-Energy
Año de construcción: usado
Precio: used machinery auction RESALE 350 €
Ubicación: Land-weight approx.: 500 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 1400 mm<br/>description: sterling flowserve dry vacuum pump sihidry v250<br> 10mbar 240m³/h<br> dry-running pump system sihidry v250 with sterling drive control<br> input: 400v -10% to 500v +10% 3ph max. 25 a at 47 to 63 hz<br> p1: 10 mbar<br> p2: 0,1 bar<br> v: 240 qm/h<br> WEIGHT APPROX.: 500 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 1400 MM
DESCRIPTION: STERLING FLOWSERVE DRY VACUUM PUMP SIHIDRY V250
10MBAR 240M³/H
DRY-RUNNING PUMP SYSTEM SIHIDRY V250 WITH STERLING DRIVE CONTROL
INPUT: 400V -10% TO 500V +10% 3PH MAX. 25 A AT 47 TO 63 HZ
P1: 10 MBAR
P2: 0,1 BAR
V: 240 QM/H
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 38.950 €
Ubicación: Land-krupp no. 06001 pump housing
welland & tuxhorn dc gear cylinder using cylinder complete with spindle
ksb etanorm 125-315 na pump
allweiler centrifugal pump
ksb etachrom - standard 25-125 a c2 centrifugal pump (pump)
ksb etanorm - g 50-160 g7 centrifugal pump (pump)
bornemann w7 2 zk-43 pump
ksb wkt40/1 vertical limbs pump
ksb 10 standard chemical pump
ksb cpkn s1 50-315 chemistry standard pump
unknown unknown pump
oppermann askf pn 10 valve
halberg hota 06504 a pump
halberg nowa 100/20 pump
dtz o primary water pump
halberg yma 06503 pump
halberg nowc 6516 liquid pump
halberg nowc 6516 liquid pump
halberg nowa 100/20 pump
halberg nowc 6516 liquid pump
halberg nova 65/20 pump complete
sihi sterling zlnd 050 pump
sihi sterling hlwy 10004 pump
sihi sterling zlnd 065 pump
halberg nowa 100/20 circulation pump
sihi sterling zlnd 050 pump
ksb etanorm m080-400 m10 nd centrifugal pump
sihi sterling zeny 100315 horizontal volute pump
sihi sterling zeny 100315 horizontal volute pump
halberg pump volute pump casing + lid
halberg yma 06503 pump
dtz p pump complete
halberg b300-1-vr + sp250/300-vr pump housing + cover
ksb cpk cm 50-200 pump
ksb etanorm - g 150-400 m pump
dtz sp 200b iii centrifugal pump
dtz sp 200b iii centrifugal pump
ksb mtc multitec-d100/2-7.1 12.81 pump
ksb etanorm 125-400 m nd centrifugal pump
halberg nowa 150/40 pump
ksb turbine powertrain streamer part 14 171; diffuser 11677; hanger ear 12522; propeller wheel
kbs kwpk 400-503 slot complete fig. 0
ksb wkb150 8vu main condensate pump
ksb kwpk 400-503 slot complete fig. 0
ksb 400-500 101 pump housing
halberg ho 80a x 2 condensate pump pot
various tdpz 0,2 lt - 4; g43-20/gk932-241 longlife dc speedo generator; motor
raco t1a6 / 3617 high performance electric cylinders
unknown unknown drive
j.h. reineke ehs;. ehs dii/50/80/55 vss pump unit with hydraulic accumulator and position switches
ask hydraulik gmbh unknown hydraulic supply
saxlund rpv140; rpv140s pump + stroke limitation
sew-eurodrive rf97 dv160l 4/c geared motor
ekato fluid em 2060 / sk 100lh / 4 pump with motor
ksb eta 80-250 circulation pump + parts + motor
unknown unknown 3 pumps
ksb luvh 150-340/2 / boiler circulating pump
sihi sterling zlnd 050250 liquid pump
 KRUPP NO. 06001 PUMP HOUSING WELLAND & TUXHORN DC GEAR CYLINDER USING CYLINDER COMPLETE WITH SPINDLE KSB ETANORM 125-315 NA PUMP ALLWEILER CENTRIFUGAL PUMP KSB ETACHROM - STANDARD 25-125 A C2 CENTRIFUGAL PUMP (PUMP) KSB ETANORM - G 50-160 G7 CENTRIFUGAL PUMP (PUMP) BORNEMANN W7 2 ZK-43 PUMP KSB WKT40/1 VERTICAL LIMBS PUMP KSB 10 STANDARD CHEMICAL PUMP KSB CPKN S1 50-315 CHEMISTRY STANDARD PUMP UNKNOWN UNKNOWN PUMP OPPERMANN ASKF PN 10 VALVE HALBERG HOTA 06504 A PUMP HALBERG NOWA 100/20 PUMP DTZ O PRIMARY WATER PUMP HALBERG YMA 06503 PUMP HALBERG NOWC 6516 LIQUID PUMP HALBERG NOWC 6516 LIQUID PUMP HALBERG NOWA 100/20 PUMP HALBERG NOWC 6516 LIQUID PUMP HALBERG NOVA 65/20 PUMP COMPLETE SIHI STERLING ZLND 050 PUMP SIHI STERLING HLWY 10004 PUMP SIHI STERLING ZLND 065 PUMP HALBERG NOWA 100/20 CIRCULATION PUMP SIHI STERLING ZLND 050 PUMP KSB ETANORM M080-400 M10 ND CENTRIFUGAL PUMP SIHI STERLING ZENY 100315 HORIZONTAL VOLUTE PUMP SIHI STERLING ZENY 100315 HORIZONTAL VOLUTE PUMP HALBERG PUMP VOLUTE PUMP CASING + LID HALBERG YMA 06503 PUMP DTZ P PUMP COMPLETE HALBERG B300-1-VR + SP250/300-VR PUMP HOUSING + COVER KSB CPK CM 50-200 PUMP KSB ETANORM - G 150-400 M PUMP DTZ SP 200B III CENTRIFUGAL PUMP DTZ SP 200B III CENTRIFUGAL PUMP KSB MTC MULTITEC-D100/2-7.1 12.81 PUMP KSB ETANORM 125-400 M ND CENTRIFUGAL PUMP HALBERG NOWA 150/40 PUMP KSB TURBINE POWERTRAIN STREAMER PART 14 171; DIFFUSER 11677; HANGER EAR 12522; PROPELLER WHEEL KBS KWPK 400-503 SLOT COMPLETE FIG. 0 KSB WKB150 8VU MAIN CONDENSATE PUMP KSB KWPK 400-503 SLOT COMPLETE FIG. 0 KSB 400-500 101 PUMP HOUSING HALBERG HO 80A X 2 CONDENSATE PUMP POT VARIOUS TDPZ 0,2 LT - 4; G43-20/GK932-241 LONGLIFE DC SPEEDO GENERATOR; MOTOR RACO T1A6 / 3617 HIGH PERFORMANCE ELECTRIC CYLINDERS UNKNOWN UNKNOWN DRIVE J.H. REINEKE EHS;. EHS DII/50/80/55 VSS PUMP UNIT WITH HYDRAULIC ACCUMULATOR AND POSITION SWITCHES ASK HYDRAULIK GMBH UNKNOWN HYDRAULIC SUPPLY SAXLUND RPV140; RPV140S PUMP + STROKE LIMITATION SEW-EURODRIVE RF97 DV160L 4/C GEARED MOTOR EKATO FLUID EM 2060 / SK 100LH / 4 PUMP WITH MOTOR KSB ETA 80-250 CIRCULATION PUMP + PARTS + MOTOR UNKNOWN UNKNOWN 3 PUMPS KSB LUVH 150-340/2 / BOILER CIRCULATING PUMP SIHI STERLING ZLND 050250 LIQUID PUMP
Vendedor: Handeldienstleister
Año de construcción: usado
Precio: used machinery auction RESALE 350 €
Ubicación: Land-weight approx.: 500 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 1400 mm<br/>description: sterling flowserve dry vacuum pump sihidry v250<br> 10mbar 240m³/h<br> dry-running pump system sihidry v250 with sterling drive control<br> input: 400v -10% to 500v +10% 3ph max. 25 a at 47 to 63 hz<br> p1: 10 mbar<br> p2: 0,1 bar<br> v: 240 qm/h<br> WEIGHT APPROX.: 500 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 1400 MM
DESCRIPTION: STERLING FLOWSERVE DRY VACUUM PUMP SIHIDRY V250
10MBAR 240M³/H
DRY-RUNNING PUMP SYSTEM SIHIDRY V250 WITH STERLING DRIVE CONTROL
INPUT: 400V -10% TO 500V +10% 3PH MAX. 25 A AT 47 TO 63 HZ
P1: 10 MBAR
P2: 0,1 BAR
V: 240 QM/H
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-
contact dryer tumble dryers kneading and reaktor "discotherm b 630" for highly viscous, pasty, and krustende products.

discotherm b needed 630 batch contact dryer tumble dryer.
the dryer is heated with steam of 10 bar abs. rubber parts are sucked in batches either with the nw-80 entry valve or boiler way inside flipped through the feed tube dn-300.
after drying, the dry product through the bottom discharge valve av-150 is discharged.
the drying is performed mbar at a pressure of approximately 100. vacuum generators is a pl-50 sihi vacuum compact system-m-4 b-ex.

system consisting of:

dryer with vapour cathedral, built in 1993, quantity per batch of 750 kg,
    heating medium steam 10 bar operating pressure 100 mbar absolute
    drive: renold hydraulic motor, 27kw, 1500 rpm, eex eii t3
    condenser j bern, built in 1992, 15 mâ² (rohrseitig 6, 6m 2 mantelseitig 7, 5m 2),
    vacuum pump system pl50m 4 b ex, with sihi liquid ring vacuum pump lema 50, 1.85 kw, built in 1993
    phasentrenngefã¤ã? hunter, 1000 l. year 1992
    sihi akvq side channel pump 0.55 kw 1450 rpm, eex eii t3, 12 mâ³/h
    operating instructions, specifications, drawings

changes and errors in the technical data, information and prices and subject to prior sale.
CONTACT DRYER TUMBLE DRYERS KNEADING AND REAKTOR "DISCOTHERM B 630" FOR HIGHLY VISCOUS, PASTY, AND KRUSTENDE PRODUCTS. DISCOTHERM B NEEDED 630 BATCH CONTACT DRYER TUMBLE DRYER. THE DRYER IS HEATED WITH STEAM OF 10 BAR ABS. RUBBER PARTS ARE SUCKED IN BATCHES EITHER WITH THE NW-80 ENTRY VALVE OR BOILER WAY INSIDE FLIPPED THROUGH THE FEED TUBE DN-300. AFTER DRYING, THE DRY PRODUCT THROUGH THE BOTTOM DISCHARGE VALVE AV-150 IS DISCHARGED. THE DRYING IS PERFORMED MBAR AT A PRESSURE OF APPROXIMATELY 100. VACUUM GENERATORS IS A PL-50 SIHI VACUUM COMPACT SYSTEM-M-4 B-EX. SYSTEM CONSISTING OF: DRYER WITH VAPOUR CATHEDRAL, BUILT IN 1993, QUANTITY PER BATCH OF 750 KG, HEATING MEDIUM STEAM 10 BAR OPERATING PRESSURE 100 MBAR ABSOLUTE DRIVE: RENOLD HYDRAULIC MOTOR, 27KW, 1500 RPM, EEX EII T3 CONDENSER J BERN, BUILT IN 1992, 15 M&ACIRC;&SUP2; (ROHRSEITIG 6, 6M 2 MANTELSEITIG 7, 5M 2), VACUUM PUMP SYSTEM PL50M 4 B EX, WITH SIHI LIQUID RING VACUUM PUMP LEMA 50, 1.85 KW, BUILT IN 1993 PHASENTRENNGEF&ATILDE;&CURREN;&ATILDE;? HUNTER, 1000 L. YEAR 1992 SIHI AKVQ SIDE CHANNEL PUMP 0.55 KW 1450 RPM, EEX EII T3, 12 M&ACIRC;&SUP3;/H OPERATING INSTRUCTIONS, SPECIFICATIONS, DRAWINGS CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE.
Vendedor: Brand GmbH
Año de construcción: usado
Ubicación: Land-tray dryer (1x), make provatech gmbh (waldner), type vakuum trockenschrank vtp 700/930 ex, new 1997, stainless steel housing (1.4571), stainless steel trays , mirror polished, heating surface 1,0 m2, drying chamber capacity 260 ltr, drying chamber sizes 700x445x930mm, working pressure vac/0,025 bar, test pressure 0,5 bar, max. temperature 80 degr. c., with jacket 27 ltr, working pressure 0,5 bar, test pressure 0,65 bar, max. temperature 80 degr c., number of trays 4 (+ bottom), tray sizes 500x400mm, distance between the trays 150mm, with 1 door , with electric (water) heating, with vacuum pump make sihi, motor ± 0,25 kw, machine number 009, with switch, floorspace 1,9x1,2 m, total height 2,0 mtray dryersdryers > tray dryers TRAY DRYER (1X), MAKE PROVATECH GMBH (WALDNER), TYPE VAKUUM TROCKENSCHRANK VTP 700/930 EX, NEW 1997, STAINLESS STEEL HOUSING (1.4571), STAINLESS STEEL TRAYS , MIRROR POLISHED, HEATING SURFACE 1,0 M2, DRYING CHAMBER CAPACITY 260 LTR, DRYING CHAMBER SIZES 700X445X930MM, WORKING PRESSURE VAC/0,025 BAR, TEST PRESSURE 0,5 BAR, MAX. TEMPERATURE 80 DEGR. C., WITH JACKET 27 LTR, WORKING PRESSURE 0,5 BAR, TEST PRESSURE 0,65 BAR, MAX. TEMPERATURE 80 DEGR C., NUMBER OF TRAYS 4 (+ BOTTOM), TRAY SIZES 500X400MM, DISTANCE BETWEEN THE TRAYS 150MM, WITH 1 DOOR , WITH ELECTRIC (WATER) HEATING, WITH VACUUM PUMP MAKE SIHI, MOTOR ± 0,25 KW, MACHINE NUMBER 009, WITH SWITCH, FLOORSPACE 1,9X1,2 M, TOTAL HEIGHT 2,0 MTRAY DRYERSDRYERS > TRAY DRYERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-stock number: ug6173
used alfa laval model ct-6 STOCK NUMBER: UG6173 USED ALFA LAVAL MODEL CT-6 "CENTRITHERM" STAINLESS STEEL CONTACT PARTS CENTRIFUGAL EVAPORATION UNIT. APPROXIMATE WATER EVAPORATION CAPACITY 800 KG/HR. EVAPORATION UNIT CONSISTS OF: 1) CT-6 CENTRITHERM EVAPORATOR MOUNTED ON FOUR LEGS STAND 2) ALFA LAVAL MODEL P2-HL PLATE HEAT EXCHANGER/CONDENSER / NEW UNIT 3) CENTRIFUGAL FEEDING PUMP BY ALFA LAVAL 4) CONCENTRATE PUMP BY FRISTAM TYPE FP722 6) CONDENSATE PUMP BY FIRSTAM TYPE FP722 7) SIHI VACUUM PUMP MODEL LPH 6616 KKMD ALL MOTORS ARE IN EX-PROOF DESIGN. NOT INCLUDED: CONTROL PANEL, VALVES AND PIPES.
Vendedor: Perry Machinery Poland
Año de construcción: usado
Ubicación: Land-pump vacuum rotary vane, make busch, type lotos, with motor 2,2 kw, 230/400 volt, mach.no. unknown, manufacturer plate is missing, mounted on frame, floorspace 1,0 x 0.6 m, total height 1,5 m, weight 250 kg, extra specifications plus extra sihi waterring pump,lohy 055, type an 1.35 01 :pumpspumps > pumps PUMP VACUUM ROTARY VANE, MAKE BUSCH, TYPE LOTOS, WITH MOTOR 2,2 KW, 230/400 VOLT, MACH.NO. UNKNOWN, MANUFACTURER PLATE IS MISSING, MOUNTED ON FRAME, FLOORSPACE 1,0 X 0.6 M, TOTAL HEIGHT 1,5 M, WEIGHT 250 KG, EXTRA SPECIFICATIONS PLUS EXTRA SIHI WATERRING PUMP,LOHY 055, TYPE AN 1.35 01&NBSP:PUMPSPUMPS > PUMPS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-vacuum screw extrusion press with 500 mm diameter, hard welded screw, mouth piece and on-top mounted vacuum double shaft mixer mdvg 920b. incl. sihi vacuum pump. 
in regularly maintained condition.  VACUUM SCREW EXTRUSION PRESS WITH 500 MM DIAMETER, HARD WELDED SCREW, MOUTH PIECE AND ON-TOP MOUNTED VACUUM DOUBLE SHAFT MIXER MDVG 920B. INCL. SIHI VACUUM PUMP. IN REGULARLY MAINTAINED CONDITION.
Vendedor: Rau GmbH
Año de construcción: usado
Ubicación: Land-emulsifier vacuum emulsifying system (1x), make fryma-maschinen ag rheinfelden, type delmix mzm/vk-25, no 19869/99, new 1999, house material stainless steel (316), with hopper /stirring vessel, capacity 48 ltr, hopper jacketed (4,5 ltr), working pressure 2,5 bar 140 degr, outlet with maso sps pomp (sanitary process pump), with mechanical seal, motor (emulsifier) 4,0 kw, 415 volt, with gate type stirrer /scraper stirrer in jacketed vessel, motor 0,25 kw, 230/400 volt, speed ± 28 rpm, with vacuum pump make sihi type lema-25, mounted on frame, with switchgear, floorspace 1,5x1,1 m, total height 1,6 mcolloid millsgrinders > colloid mills EMULSIFIER VACUUM EMULSIFYING SYSTEM (1X), MAKE FRYMA-MASCHINEN AG RHEINFELDEN, TYPE DELMIX MZM/VK-25, NO 19869/99, NEW 1999, HOUSE MATERIAL STAINLESS STEEL (316), WITH HOPPER /STIRRING VESSEL, CAPACITY 48 LTR, HOPPER JACKETED (4,5 LTR), WORKING PRESSURE 2,5 BAR 140 DEGR, OUTLET WITH MASO SPS POMP (SANITARY PROCESS PUMP), WITH MECHANICAL SEAL, MOTOR (EMULSIFIER) 4,0 KW, 415 VOLT, WITH GATE TYPE STIRRER /SCRAPER STIRRER IN JACKETED VESSEL, MOTOR 0,25 KW, 230/400 VOLT, SPEED ± 28 RPM, WITH VACUUM PUMP MAKE SIHI TYPE LEMA-25, MOUNTED ON FRAME, WITH SWITCHGEAR, FLOORSPACE 1,5X1,1 M, TOTAL HEIGHT 1,6 MCOLLOID MILLSGRINDERS > COLLOID MILLS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-side channel pump, multistage with magnetkupplung good as new, unused capacity 12 m³/hr head 30 m power 11 kw speed 1.450 u/min dn 80 inlet outlet dn 40 atex explosion proof    SIDE CHANNEL PUMP, MULTISTAGE WITH MAGNETKUPPLUNG GOOD AS NEW, UNUSED CAPACITY 12 M³/HR HEAD 30 M POWER 11 KW SPEED 1.450 U/MIN DN 80 INLET OUTLET DN 40 ATEX EXPLOSION PROOF
Vendedor: GS-INDUSTRIESERVICE
Año de construcción: usado
Ubicación: Land-capacity 400-2000 ltr/hr, with motor 0,37 kw, 220/380 volt, floorspace 0,6x0,3 m, total height 0,4 m, weight 40 kgpumpspumps > pumps CAPACITY 400-2000 LTR/HR, WITH MOTOR 0,37 KW, 220/380 VOLT, FLOORSPACE 0,6X0,3 M, TOTAL HEIGHT 0,4 M, WEIGHT 40 KGPUMPSPUMPS > PUMPS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-capacity 4,0 kw
speed 1.435 rpm
inlet 50 mm
outlet 50 mm
vacuum pump incl. strainer and valve
 CAPACITY 4,0 KW SPEED 1.435 RPM INLET 50 MM OUTLET 50 MM VACUUM PUMP INCL. STRAINER AND VALVE
Vendedor: GS-INDUSTRIESERVICE
Año de construcción: usado
Ubicación: Land-pump vacuum, make busch, type l2 040, new 1987, with motor 2,2 kw, 220/380 volt, mach.no. 077, mounted on frame, floorspace 1,2 x 1,0 m, total height 1,3 m, weight 300 kg, extra specifications plus extra sihi waterring pumppumpspumps > pumps PUMP VACUUM, MAKE BUSCH, TYPE L2 040, NEW 1987, WITH MOTOR 2,2 KW, 220/380 VOLT, MACH.NO. 077, MOUNTED ON FRAME, FLOORSPACE 1,2 X 1,0 M, TOTAL HEIGHT 1,3 M, WEIGHT 300 KG, EXTRA SPECIFICATIONS PLUS EXTRA SIHI WATERRING PUMPPUMPSPUMPS > PUMPS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-qty. 1 second-hand extrusion press line
mfc.:	schloemann  		built:	1980		force:	4000 mt
the press was used in the brass and copper application. the press has been  reconstructed and 
changed to aluminium application in 2005.
before the production has been stopped was  the press in excellent condition.
the plant has been stopped in 2010 due to ecenomical situation.
billet dia.:  	8’’(203mm) - 12’’(304mm)		billet length:  1000 mm
main ram: 	1400 mm dia			side  cylinder: 300 mm  dia.  (piston  head)
exit sä±ze of and plate: 	500 mm
scope of supply:
feeding system 	billet furnace		extrusion press	
run aut table 45 mt long		cooling table (belt  type )
strecher  force:  	200-300 ton		die oven
finsihing table and saw
billet furnace  ( 2 pieces) one natural gas type one induction type  junker
hot saw		operation  desk plc type (need sone maintenance)  sä°emens
2 pieces steam dumany block 	containers dia.: 203 – 228 – 245 – 254 mm
various spare parts and tools
 QTY. 1 SECOND-HAND EXTRUSION PRESS LINE MFC.: SCHLOEMANN BUILT: 1980 FORCE: 4000 MT THE PRESS WAS USED IN THE BRASS AND COPPER APPLICATION. THE PRESS HAS BEEN RECONSTRUCTED AND CHANGED TO ALUMINIUM APPLICATION IN 2005. BEFORE THE PRODUCTION HAS BEEN STOPPED WAS THE PRESS IN EXCELLENT CONDITION. THE PLANT HAS BEEN STOPPED IN 2010 DUE TO ECENOMICAL SITUATION. BILLET DIA.: 8&ACIRC;€™&ACIRC;€™(203MM) - 12&ACIRC;€™&ACIRC;€™(304MM) BILLET LENGTH: 1000 MM MAIN RAM: 1400 MM DIA SIDE CYLINDER: 300 MM DIA. (PISTON HEAD) EXIT S&AUML;&PLUSMN;ZE OF AND PLATE: 500 MM SCOPE OF SUPPLY: FEEDING SYSTEM BILLET FURNACE EXTRUSION PRESS RUN AUT TABLE 45 MT LONG COOLING TABLE (BELT TYPE ) STRECHER FORCE: 200-300 TON DIE OVEN FINSIHING TABLE AND SAW BILLET FURNACE ( 2 PIECES) ONE NATURAL GAS TYPE ONE INDUCTION TYPE JUNKER HOT SAW OPERATION DESK PLC TYPE (NEED SONE MAINTENANCE) S&AUML;&DEG;EMENS 2 PIECES STEAM DUMANY BLOCK CONTAINERS DIA.: 203 &ACIRC;€“ 228 &ACIRC;€“ 245 &ACIRC;€“ 254 MM VARIOUS SPARE PARTS AND TOOLS
Vendedor: MET-TECH GMBH
Año de construcción: usado
Ubicación: Land-rotating vacuum filter (1x), make seitz enzinger noll, type vacubloc drehfilter 12 m2, no 318-59820, new unknown, material stainless steel (304), filter surface 12 m2, drum sizes dia. 1500x2550mm, motor 0,75 kw, 220/380 volt, with variable speed drive , trough without stirrer, with knive discharge, mechanical operated, with vacuum pump (2x), make sihi type lphe-40516, motor (2x) 5,5 kw, 380/660 volt, with vacuum vessel, with liquid pump make netzsch, type nu-60 a, motor 3,2/4,0 kw, 380 volt, mounted on stainless st. frame, with switchgear, floorspace 5,1x2,4 m, total height 2,3 m, weight 3100 kgrotating vacuum filtersfilters > rotating vacuum filters ROTATING VACUUM FILTER (1X), MAKE SEITZ ENZINGER NOLL, TYPE VACUBLOC DREHFILTER 12 M2, NO 318-59820, NEW UNKNOWN, MATERIAL STAINLESS STEEL (304), FILTER SURFACE 12 M2, DRUM SIZES DIA. 1500X2550MM, MOTOR 0,75 KW, 220/380 VOLT, WITH VARIABLE SPEED DRIVE , TROUGH WITHOUT STIRRER, WITH KNIVE DISCHARGE, MECHANICAL OPERATED, WITH VACUUM PUMP (2X), MAKE SIHI TYPE LPHE-40516, MOTOR (2X) 5,5 KW, 380/660 VOLT, WITH VACUUM VESSEL, WITH LIQUID PUMP MAKE NETZSCH, TYPE NU-60 A, MOTOR 3,2/4,0 KW, 380 VOLT, MOUNTED ON STAINLESS ST. FRAME, WITH SWITCHGEAR, FLOORSPACE 5,1X2,4 M, TOTAL HEIGHT 2,3 M, WEIGHT 3100 KGROTATING VACUUM FILTERSFILTERS > ROTATING VACUUM FILTERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-horizontal, self-priming centrifugal pump in outlining housing design
closed type impellers with a suction level

manufacturer: siemen & hinsch gmbh
type: tkha

technical data:

flow: up to 350 m ³/h
head: up to 185 m
speed: max 3600 1/min
temperature: maximum 120 ° c
casing pressure: up to 16 bar
shaft seal: gland, mechanical seal
materials: cast iron, bronze, stainless steel

description:

the suction level is located on the suction side. it is parallel to the first orientation of liquid level and works after the ansaugezustand and attack of large shares of the gas mixture separation principle. as a result of the separation of the gas before entering the first impeller is this largely loaded with liquid. finely distributed gas shares with promoted easily. if the suction on the pressure side exists a back pressure up to 0.5 bar, the sucked gas into the discharge line is encouraged. a separate gas line is required for higher pressure.

application:

the self-priming centrifugal pumps of the series of tkh used then, if it applies easily to promote pure or not bleak liquid containing no solid particles. the selbstansaugefähigkeit has a broad application in the areas of drinking water and water supply (municipalities and industrial enterprises, promoting fuel (hubs and at large tanks), in fire extinguishing systems, cooling system construction, shipbuilding (bilge and ballast pumps) and in the chemical and petrochemical industry.)
  HORIZONTAL, SELF-PRIMING CENTRIFUGAL PUMP IN OUTLINING HOUSING DESIGN CLOSED TYPE IMPELLERS WITH A SUCTION LEVEL MANUFACTURER: SIEMEN & HINSCH GMBH TYPE: TKHA TECHNICAL DATA: FLOW: UP TO 350 M ³/H HEAD: UP TO 185 M SPEED: MAX 3600 1/MIN TEMPERATURE: MAXIMUM 120 ° C CASING PRESSURE: UP TO 16 BAR SHAFT SEAL: GLAND, MECHANICAL SEAL MATERIALS: CAST IRON, BRONZE, STAINLESS STEEL DESCRIPTION: THE SUCTION LEVEL IS LOCATED ON THE SUCTION SIDE. IT IS PARALLEL TO THE FIRST ORIENTATION OF LIQUID LEVEL AND WORKS AFTER THE ANSAUGEZUSTAND AND ATTACK OF LARGE SHARES OF THE GAS MIXTURE SEPARATION PRINCIPLE. AS A RESULT OF THE SEPARATION OF THE GAS BEFORE ENTERING THE FIRST IMPELLER IS THIS LARGELY LOADED WITH LIQUID. FINELY DISTRIBUTED GAS SHARES WITH PROMOTED EASILY. IF THE SUCTION ON THE PRESSURE SIDE EXISTS A BACK PRESSURE UP TO 0.5 BAR, THE SUCKED GAS INTO THE DISCHARGE LINE IS ENCOURAGED. A SEPARATE GAS LINE IS REQUIRED FOR HIGHER PRESSURE. APPLICATION: THE SELF-PRIMING CENTRIFUGAL PUMPS OF THE SERIES OF TKH USED THEN, IF IT APPLIES EASILY TO PROMOTE PURE OR NOT BLEAK LIQUID CONTAINING NO SOLID PARTICLES. THE SELBSTANSAUGEFäHIGKEIT HAS A BROAD APPLICATION IN THE AREAS OF DRINKING WATER AND WATER SUPPLY (MUNICIPALITIES AND INDUSTRIAL ENTERPRISES, PROMOTING FUEL (HUBS AND AT LARGE TANKS), IN FIRE EXTINGUISHING SYSTEMS, COOLING SYSTEM CONSTRUCTION, SHIPBUILDING (BILGE AND BALLAST PUMPS) AND IN THE CHEMICAL AND PETROCHEMICAL INDUSTRY.)
Vendedor: Tank und Apparate Barth GmbH
Año de construcción: usado
Ubicación: Land-rotating vacuum filter (1x), make seitz enzinger noll ag, type vacubloc drehfilter, new unknown, material stainless steel (304), filter surface 8,0 m2, drum sizes dia. 1200x2120mm, motor 0,75 kw, 220/380 volt, with variable speed drive, with knive discharge, with vacuum pump make sihi, type leha-450, motor 15,0 kw, 380/660 volt, with vacuum vessel, with liquid pump, suitable for pre-coat, mounted on stainless st. frame, with switchgear, floorspace 4,1x1,9 m, total height 2,6 m, weight 2100 kgrotating vacuum filtersfilters > rotating vacuum filters ROTATING VACUUM FILTER (1X), MAKE SEITZ ENZINGER NOLL AG, TYPE VACUBLOC DREHFILTER, NEW UNKNOWN, MATERIAL STAINLESS STEEL (304), FILTER SURFACE 8,0 M2, DRUM SIZES DIA. 1200X2120MM, MOTOR 0,75 KW, 220/380 VOLT, WITH VARIABLE SPEED DRIVE, WITH KNIVE DISCHARGE, WITH VACUUM PUMP MAKE SIHI, TYPE LEHA-450, MOTOR 15,0 KW, 380/660 VOLT, WITH VACUUM VESSEL, WITH LIQUID PUMP, SUITABLE FOR PRE-COAT, MOUNTED ON STAINLESS ST. FRAME, WITH SWITCHGEAR, FLOORSPACE 4,1X1,9 M, TOTAL HEIGHT 2,6 M, WEIGHT 2100 KGROTATING VACUUM FILTERSFILTERS > ROTATING VACUUM FILTERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-horizontal side channel pump

manufacturer: sameer &amp;amp; debbie mbh
type: akhe 3101
serial number: bn bath 02 4

in very good condition! HORIZONTAL SIDE CHANNEL PUMP MANUFACTURER: SAMEER &AMP;AMP; DEBBIE MBH TYPE: AKHE 3101 SERIAL NUMBER: BN BATH 02 4 IN VERY GOOD CONDITION!
Vendedor: Tank und Apparate Barth GmbH
Año de construcción: usado
Ubicación: Land-rotating vacuum filter (1x), make seitz werke gmbh bad kreuznach, type vacubloc drehfilter, new unknown, material stainless steel (304), filter surface 6,0 m2, drum sizes dia. 900x2050mm, motor 0,18 kw, 220/380 volt, with variable speed drive , trough without stirrer, with knive discharge, manual operated, with vacuum pump make sihi, type lphe-40516, motor 5,5 kw, 380 volt, with vacuum vessel, with liquid pump make netzsch, type nu-50, motor 1,3/1,8 kw, 380 volt, mounted on stainless st. frame, with switchgear, floorspace 3,9x1,7 m, total height 1,8 m, weight 1400 kgrotating vacuum filtersfilters > rotating vacuum filters ROTATING VACUUM FILTER (1X), MAKE SEITZ WERKE GMBH BAD KREUZNACH, TYPE VACUBLOC DREHFILTER, NEW UNKNOWN, MATERIAL STAINLESS STEEL (304), FILTER SURFACE 6,0 M2, DRUM SIZES DIA. 900X2050MM, MOTOR 0,18 KW, 220/380 VOLT, WITH VARIABLE SPEED DRIVE , TROUGH WITHOUT STIRRER, WITH KNIVE DISCHARGE, MANUAL OPERATED, WITH VACUUM PUMP MAKE SIHI, TYPE LPHE-40516, MOTOR 5,5 KW, 380 VOLT, WITH VACUUM VESSEL, WITH LIQUID PUMP MAKE NETZSCH, TYPE NU-50, MOTOR 1,3/1,8 KW, 380 VOLT, MOUNTED ON STAINLESS ST. FRAME, WITH SWITCHGEAR, FLOORSPACE 3,9X1,7 M, TOTAL HEIGHT 1,8 M, WEIGHT 1400 KGROTATING VACUUM FILTERSFILTERS > ROTATING VACUUM FILTERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-centrifugal pump

manufacturer: sameer &amp;amp; debbie gmbh
type: zai8318kk
serial no.: 969409

in good condition! CENTRIFUGAL PUMP MANUFACTURER: SAMEER &AMP;AMP; DEBBIE GMBH TYPE: ZAI8318KK SERIAL NO.: 969409 IN GOOD CONDITION!
Vendedor: Tank und Apparate Barth GmbH
Año de construcción: usado
Ubicación: Land-paddle dryer intensiv-misch-trocker (1x), make lipp mischtechnik gmbh, type imt-2000, no 3228-1, new 2003, material stainless steel (1.4301), capacity 2067 ltr, inlet dia. 395mm, outlet dia. 180mm, working pressure vacuum, with jacket (140 ltr), working pressure 5 bar, max. temperature 98 degr. c., with adjustable packing glands, motor 75 kw, 400/690 volt, speed mixing shaft ± 36 rpm, with lump breaker (4x), motor 18,5 kw, 400/690 volt (1470 rpm), with vacuum pump make sihi, type lpha-55320, motor 15,0 kw, 380/660 volt, mounted on frame, floorspace 4,4x2,8 m, total height 3,7 m, weight 9500 kgpaddle dryersdryers > paddle dryers PADDLE DRYER INTENSIV-MISCH-TROCKER (1X), MAKE LIPP MISCHTECHNIK GMBH, TYPE IMT-2000, NO 3228-1, NEW 2003, MATERIAL STAINLESS STEEL (1.4301), CAPACITY 2067 LTR, INLET DIA. 395MM, OUTLET DIA. 180MM, WORKING PRESSURE VACUUM, WITH JACKET (140 LTR), WORKING PRESSURE 5 BAR, MAX. TEMPERATURE 98 DEGR. C., WITH ADJUSTABLE PACKING GLANDS, MOTOR 75 KW, 400/690 VOLT, SPEED MIXING SHAFT ± 36 RPM, WITH LUMP BREAKER (4X), MOTOR 18,5 KW, 400/690 VOLT (1470 RPM), WITH VACUUM PUMP MAKE SIHI, TYPE LPHA-55320, MOTOR 15,0 KW, 380/660 VOLT, MOUNTED ON FRAME, FLOORSPACE 4,4X2,8 M, TOTAL HEIGHT 3,7 M, WEIGHT 9500 KGPADDLE DRYERSDRYERS > PADDLE DRYERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-centrifugal pump

manufacturer: sameer &amp;amp; debbie gmbh
type: zai
serial no.: 1378918

in good condition! CENTRIFUGAL PUMP MANUFACTURER: SAMEER &AMP;AMP; DEBBIE GMBH TYPE: ZAI SERIAL NO.: 1378918 IN GOOD CONDITION!
Vendedor: Tank und Apparate Barth GmbH
Año de construcción: usado
Ubicación: Land-closed stirring vessel vacuum processing vessel (1x), make becomix mischtechnik stuhr, type rw-5000 s, no 011/8-195, new 1986, material stainless steel (1.4541), capacity 6755 ltr, useful capacity 5000 ltr, vessel sizes dia. 1996x1940mm, dished top side, manhole dia. 400mm, working pressure vac/3,5 bar, test pressure 4,9 bar, with jacket (261 ltr), working pressure 3,5 bar, test pressure 6,3 bar, max. temperature 138/155 degr. c. (vessel/jacket), with paddel stirrer scraper stirrer, motor 15,0 kw, 380 volt, with homogeniser, motor 45,0 kw, 380/660 volt, mounted on legs, with switchgear , with sihi vacuum pump type lphe-45316, floorspace pallet 3,5x2,7 m, total height 4,0 m, extra specifications - with 2 becomix jacketed stirring vessels, capacity 3400 ltr each -- reconditioned --processing vesselsprocessing vessels > processing vessels CLOSED STIRRING VESSEL VACUUM PROCESSING VESSEL (1X), MAKE BECOMIX MISCHTECHNIK STUHR, TYPE RW-5000 S, NO 011/8-195, NEW 1986, MATERIAL STAINLESS STEEL (1.4541), CAPACITY 6755 LTR, USEFUL CAPACITY 5000 LTR, VESSEL SIZES DIA. 1996X1940MM, DISHED TOP SIDE, MANHOLE DIA. 400MM, WORKING PRESSURE VAC/3,5 BAR, TEST PRESSURE 4,9 BAR, WITH JACKET (261 LTR), WORKING PRESSURE 3,5 BAR, TEST PRESSURE 6,3 BAR, MAX. TEMPERATURE 138/155 DEGR. C. (VESSEL/JACKET), WITH PADDEL STIRRER SCRAPER STIRRER, MOTOR 15,0 KW, 380 VOLT, WITH HOMOGENISER, MOTOR 45,0 KW, 380/660 VOLT, MOUNTED ON LEGS, WITH SWITCHGEAR , WITH SIHI VACUUM PUMP TYPE LPHE-45316, FLOORSPACE PALLET 3,5X2,7 M, TOTAL HEIGHT 4,0 M, EXTRA SPECIFICATIONS - WITH 2 BECOMIX JACKETED STIRRING VESSELS, CAPACITY 3400 LTR EACH -- RECONDITIONED --PROCESSING VESSELSPROCESSING VESSELS > PROCESSING VESSELS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-new pump for sale

liquid ring vacuum pumps with magnetic coupling


sihi liquid ring vacuum pumps with magnetic coupling are displacement pumps of simple and robust design meeting high demands on tightness. two liquid surrounded sleeve bearings of tungsten and silicon carbide (wc / sic) bear the shaft axially and radial. the application of high-grade magnetic materials with high density of energy guarantees the transmission of the nominal torque and safety during the start-up phase and in case of overload.
the modular magnetic system makes possible the optimal adaptation to different operating conditions. the main components of the pumps mostly are equal to those of the standard pumps, the connecting dimensions are identica      NEW PUMP FOR SALE LIQUID RING VACUUM PUMPS WITH MAGNETIC COUPLING SIHI LIQUID RING VACUUM PUMPS WITH MAGNETIC COUPLING ARE DISPLACEMENT PUMPS OF SIMPLE AND ROBUST DESIGN MEETING HIGH DEMANDS ON TIGHTNESS. TWO LIQUID SURROUNDED SLEEVE BEARINGS OF TUNGSTEN AND SILICON CARBIDE (WC / SIC) BEAR THE SHAFT AXIALLY AND RADIAL. THE APPLICATION OF HIGH-GRADE MAGNETIC MATERIALS WITH HIGH DENSITY OF ENERGY GUARANTEES THE TRANSMISSION OF THE NOMINAL TORQUE AND SAFETY DURING THE START-UP PHASE AND IN CASE OF OVERLOAD. THE MODULAR MAGNETIC SYSTEM MAKES POSSIBLE THE OPTIMAL ADAPTATION TO DIFFERENT OPERATING CONDITIONS. THE MAIN COMPONENTS OF THE PUMPS MOSTLY ARE EQUAL TO THOSE OF THE STANDARD PUMPS, THE CONNECTING DIMENSIONS ARE IDENTICA
Vendedor: AssistEquipment AS
Año de construcción: usado
Ubicación: Land-paddle dryer turbo sphere dryer (1x), make moritz s.a. chatou, type tsi-1000 pharma, no 852 145b, new 1982, material stainless steel (316l), capacity 1250 ltr, useful capacity 1000 ltr, trough sizes dia. 1350mm, manhole dia. 750mm, outlet dia. 200mm, working pressure vac/2 bar, with jacket (110 ltr), working pressure 3 bar, motor 55,0 kw, 380 volt, hydraulic driven, with variable speed drive, speed mixing shaft ± 0-125 rpm, with lump breaker, motor 9,0 kw, 220/380 volt, with vacuum pump make sihi, motor 7,5 kw, 220/380 volt, mounted on frame, with switchgear, floorspace 2,9x2,2 m, total height 3,1 mpaddle dryersdryers > paddle dryers PADDLE DRYER TURBO SPHERE DRYER (1X), MAKE MORITZ S.A. CHATOU, TYPE TSI-1000 PHARMA, NO 852 145B, NEW 1982, MATERIAL STAINLESS STEEL (316L), CAPACITY 1250 LTR, USEFUL CAPACITY 1000 LTR, TROUGH SIZES DIA. 1350MM, MANHOLE DIA. 750MM, OUTLET DIA. 200MM, WORKING PRESSURE VAC/2 BAR, WITH JACKET (110 LTR), WORKING PRESSURE 3 BAR, MOTOR 55,0 KW, 380 VOLT, HYDRAULIC DRIVEN, WITH VARIABLE SPEED DRIVE, SPEED MIXING SHAFT ± 0-125 RPM, WITH LUMP BREAKER, MOTOR 9,0 KW, 220/380 VOLT, WITH VACUUM PUMP MAKE SIHI, MOTOR 7,5 KW, 220/380 VOLT, MOUNTED ON FRAME, WITH SWITCHGEAR, FLOORSPACE 2,9X2,2 M, TOTAL HEIGHT 3,1 MPADDLE DRYERSDRYERS > PADDLE DRYERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-fully automatic wasserentgaser, cip capable, autom. valves, hilge pump, sihi vacuum degassing, 40,000 litres / h FULLY AUTOMATIC WASSERENTGASER, CIP CAPABLE, AUTOM. VALVES, HILGE PUMP, SIHI VACUUM DEGASSING, 40,000 LITRES / H
Vendedor: Füllmeister GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-closed stirring vessel vacuum processing vessel (1x), make haagen & rinau mischtechnik bremen, type src-200, no 8233751, new 1987, material stainless steel, capacity 345 ltr (useful capacity 50-200 ltr), vessel sizes dia. 740x550mm, dished bottom, dished top side, with cover, working pressure vac/3 bar, with jacket (32,5 ltr), working pressure 4 bar, max. temperature 143/151 degr. c. (vessel/jacket), with anchor stirrer scraper stirrer (teflon scrapers missing), motor 5,5 kw, 220/380 volt, speed mixing shaft variable, with homogeniser, motor 1,5/6,0 kw, 380 volt, extra specifications - with vacuum pump make sihi, type lema-50 (motor 4,0 kw) -- reconditioned --processing vesselsprocessing vessels > processing vessels CLOSED STIRRING VESSEL VACUUM PROCESSING VESSEL (1X), MAKE HAAGEN & RINAU MISCHTECHNIK BREMEN, TYPE SRC-200, NO 8233751, NEW 1987, MATERIAL STAINLESS STEEL, CAPACITY 345 LTR (USEFUL CAPACITY 50-200 LTR), VESSEL SIZES DIA. 740X550MM, DISHED BOTTOM, DISHED TOP SIDE, WITH COVER, WORKING PRESSURE VAC/3 BAR, WITH JACKET (32,5 LTR), WORKING PRESSURE 4 BAR, MAX. TEMPERATURE 143/151 DEGR. C. (VESSEL/JACKET), WITH ANCHOR STIRRER SCRAPER STIRRER (TEFLON SCRAPERS MISSING), MOTOR 5,5 KW, 220/380 VOLT, SPEED MIXING SHAFT VARIABLE, WITH HOMOGENISER, MOTOR 1,5/6,0 KW, 380 VOLT, EXTRA SPECIFICATIONS - WITH VACUUM PUMP MAKE SIHI, TYPE LEMA-50 (MOTOR 4,0 KW) -- RECONDITIONED --PROCESSING VESSELSPROCESSING VESSELS > PROCESSING VESSELS
Vendedor: Foeth
Año de construcción: usado
Precio: 1.500 €
Ubicación: Land-cat-nr. 12-1040

in a very good condition

capacity: 12.000 litres/h

motor capacity: 4 kw

new price: 5000€

multistage (3 stages)

measurements and weight:		
lxwxh: 124  x 38 x 112 cm 
weight: 154 kg

for more information please contact us under: phone +49(0)9353-909050
fax: 09353-9090522, mobile: 0171-6518248

subject to prior sale.
all prices are valid ex-works, excl.vat.	    		
freight charges: depending on dimensions and destination. CAT-NR. 12-1040 IN A VERY GOOD CONDITION CAPACITY: 12.000 LITRES/H MOTOR CAPACITY: 4 KW NEW PRICE: 5000€ MULTISTAGE (3 STAGES) MEASUREMENTS AND WEIGHT: LXWXH: 124 X 38 X 112 CM WEIGHT: 154 KG FOR MORE INFORMATION PLEASE CONTACT US UNDER: PHONE +49(0)9353-909050 FAX: 09353-9090522, MOBILE: 0171-6518248 SUBJECT TO PRIOR SALE. ALL PRICES ARE VALID EX-WORKS, EXCL.VAT. FREIGHT CHARGES: DEPENDING ON DIMENSIONS AND DESTINATION.
Vendedor: Eurolux GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-closed stirring vessel vacuum processing vessel (1x), make fryma ag rheinfelden, type vme-20, no f19.6079, new 1980, material stainless steel (316), capacity 8,0-35,0 ltr, vessel sizes dia. 355x370mm, flat top side, with cover, outlet dia. 25mm, vessel can be tilted, working pressure vac/0,5 bar, with jacket, working pressure (0,3 bar), with anchor stirrer scraper stirrer (motor 0,18 kw), with dissolver stirrer, motor 0,75 kw, 380 volt, speed mixing shaft 1400 rpm, with homogeniser, motor 1,1 kw, 380 volt (2840 rpm), mounted on legs , mounted on wheels, with switch, floorspace 1,1x0,6 m, total height 2,0 m, extra specifications - with sihi vacuum pump, type lrk-10603 (motor 0,75 kw)processing vesselsprocessing vessels > processing vessels CLOSED STIRRING VESSEL VACUUM PROCESSING VESSEL (1X), MAKE FRYMA AG RHEINFELDEN, TYPE VME-20, NO F19.6079, NEW 1980, MATERIAL STAINLESS STEEL (316), CAPACITY 8,0-35,0 LTR, VESSEL SIZES DIA. 355X370MM, FLAT TOP SIDE, WITH COVER, OUTLET DIA. 25MM, VESSEL CAN BE TILTED, WORKING PRESSURE VAC/0,5 BAR, WITH JACKET, WORKING PRESSURE (0,3 BAR), WITH ANCHOR STIRRER SCRAPER STIRRER (MOTOR 0,18 KW), WITH DISSOLVER STIRRER, MOTOR 0,75 KW, 380 VOLT, SPEED MIXING SHAFT 1400 RPM, WITH HOMOGENISER, MOTOR 1,1 KW, 380 VOLT (2840 RPM), MOUNTED ON LEGS , MOUNTED ON WHEELS, WITH SWITCH, FLOORSPACE 1,1X0,6 M, TOTAL HEIGHT 2,0 M, EXTRA SPECIFICATIONS - WITH SIHI VACUUM PUMP, TYPE LRK-10603 (MOTOR 0,75 KW)PROCESSING VESSELSPROCESSING VESSELS > PROCESSING VESSELS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-vacuum pump sihi
manufacturer: sihi
drive: 5,5kw
rotation speed: 1440/min
  VACUUM PUMP SIHI MANUFACTURER: SIHI DRIVE: 5,5KW ROTATION SPEED: 1440/MIN
Vendedor: KM Plastic Machinery
Año de construcción: usado
Ubicación: Land-vacuum belt filter (1x), make pannevis utrecht, type rt 0,96x5,2 m, no 1336, new 1986, material stainless steel, filter surface 5,3 m2, filter width 960mm, filter length 5200mm, number of sections: 4, with motor 0,75 kw, 220/380 volt, with vacuum pump make sihi, type lpha-70530 bn, motor 30,0 kw, 380/660 volt, on stainless steel frame, floorspace 10,5x2,6 m, total height 2,4 mvacuum belt filtersfilters > vacuum belt filters VACUUM BELT FILTER (1X), MAKE PANNEVIS UTRECHT, TYPE RT 0,96X5,2 M, NO 1336, NEW 1986, MATERIAL STAINLESS STEEL, FILTER SURFACE 5,3 M2, FILTER WIDTH 960MM, FILTER LENGTH 5200MM, NUMBER OF SECTIONS: 4, WITH MOTOR 0,75 KW, 220/380 VOLT, WITH VACUUM PUMP MAKE SIHI, TYPE LPHA-70530 BN, MOTOR 30,0 KW, 380/660 VOLT, ON STAINLESS STEEL FRAME, FLOORSPACE 10,5X2,6 M, TOTAL HEIGHT 2,4 MVACUUM BELT FILTERSFILTERS > VACUUM BELT FILTERS
Vendedor: Foeth
Año de construcción: usado
Precio: 1.900 €
Ubicación: Land-cat.-nr. 11-3405

in a very good condition

lxhxw: 146x93x95 cm
weight: 200 kg

for more information please contact us under: phone +49(0)9353-909050
fax: 09353-9090522, mobile: 0171-6518248

subject to prior sale.
all prices are valid ex-works, excl.vat.	    		
freight charges: depending on dimensions and destination. CAT.-NR. 11-3405 IN A VERY GOOD CONDITION LXHXW: 146X93X95 CM WEIGHT: 200 KG FOR MORE INFORMATION PLEASE CONTACT US UNDER: PHONE +49(0)9353-909050 FAX: 09353-9090522, MOBILE: 0171-6518248 SUBJECT TO PRIOR SALE. ALL PRICES ARE VALID EX-WORKS, EXCL.VAT. FREIGHT CHARGES: DEPENDING ON DIMENSIONS AND DESTINATION.
Vendedor: Eurolux GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-horizontal autoclave steam sterilizer (1x), make linden steril tech (getinge), type 11/6,5/22, no 02955, new 1997, material stainless steel (1.4571), capacity 1960 ltr, internal width 720mm, internal depth 2240mm, internal height 1200mm, inlet/outlet 740x1330mm (2x), tray sizes 1010x630mm, working pressure vac/3 bar, test pressure 3,9 bar, max. temperature 143 degr. c., with jacket (675 ltr), working pressure 3 bar, test pressure 5,2 bar, max. temperature 143 degr. c., with vacuum pump make sihi type lphe 45316, motor 7,5 kw, 220/380 volt, with transport trolley (4x), mounted on stainless st. frame, floorspace 2,8x1,9 m, total height 1,9 m, extra specifications - sterilizer has never been used - with various spare partsautoclavesautoclaves > autoclaves HORIZONTAL AUTOCLAVE STEAM STERILIZER (1X), MAKE LINDEN STERIL TECH (GETINGE), TYPE 11/6,5/22, NO 02955, NEW 1997, MATERIAL STAINLESS STEEL (1.4571), CAPACITY 1960 LTR, INTERNAL WIDTH 720MM, INTERNAL DEPTH 2240MM, INTERNAL HEIGHT 1200MM, INLET/OUTLET 740X1330MM (2X), TRAY SIZES 1010X630MM, WORKING PRESSURE VAC/3 BAR, TEST PRESSURE 3,9 BAR, MAX. TEMPERATURE 143 DEGR. C., WITH JACKET (675 LTR), WORKING PRESSURE 3 BAR, TEST PRESSURE 5,2 BAR, MAX. TEMPERATURE 143 DEGR. C., WITH VACUUM PUMP MAKE SIHI TYPE LPHE 45316, MOTOR 7,5 KW, 220/380 VOLT, WITH TRANSPORT TROLLEY (4X), MOUNTED ON STAINLESS ST. FRAME, FLOORSPACE 2,8X1,9 M, TOTAL HEIGHT 1,9 M, EXTRA SPECIFICATIONS - STERILIZER HAS NEVER BEEN USED - WITH VARIOUS SPARE PARTSAUTOCLAVESAUTOCLAVES > AUTOCLAVES
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-vacuum belt filter in pressure tight housing (1x), make pannevis, type rt/pt 0,25 x 2 mtr, no 1645, new 1994, material stainless steel (1.4571), filter surface 0,5 m2, filter width 250mm, filter length 2000mm, number of sections: 4 (3x 400mm + 1x 800mm), with motor 0,25 kw, 230/400 volt (ex), with variable speed drive, belt speed ± 0,4-2,4 cm/s, with vacuum pump make sihi, with liquid pump, mounted on mild steel frame, with switchgear (dim. 1,4x0,5x2,2 m - lxwxh), floorspace filter 4,0x2,1 m, weight 8000 kg, extra specifications - housing vac/6 bar, test pressure 11,7 barvacuum belt filtersfilters > vacuum belt filters VACUUM BELT FILTER IN PRESSURE TIGHT HOUSING (1X), MAKE PANNEVIS, TYPE RT/PT 0,25 X 2 MTR, NO 1645, NEW 1994, MATERIAL STAINLESS STEEL (1.4571), FILTER SURFACE 0,5 M2, FILTER WIDTH 250MM, FILTER LENGTH 2000MM, NUMBER OF SECTIONS: 4 (3X 400MM + 1X 800MM), WITH MOTOR 0,25 KW, 230/400 VOLT (EX), WITH VARIABLE SPEED DRIVE, BELT SPEED ± 0,4-2,4 CM/S, WITH VACUUM PUMP MAKE SIHI, WITH LIQUID PUMP, MOUNTED ON MILD STEEL FRAME, WITH SWITCHGEAR (DIM. 1,4X0,5X2,2 M - LXWXH), FLOORSPACE FILTER 4,0X2,1 M, WEIGHT 8000 KG, EXTRA SPECIFICATIONS - HOUSING VAC/6 BAR, TEST PRESSURE 11,7 BARVACUUM BELT FILTERSFILTERS > VACUUM BELT FILTERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-vacuum belt filter in pressure tight housing (1x), make pannevis, type rt/pt pilot, no 1529, new 1990, material stainless steel (1.4571) + polypropylene, filter surface 0,1 m2, filter width 100mm, filter length 1000mm, with motor 0,12 kw, 380 volt (ex), with variable speed drive, knife discharge, with vacuum pump make sihi, type lphe-40106, motor 3,5 kw, 380 volt (ex), with vacuum tank (3x), with liquid pump (hose pump 3x), motor 3x 0,25 kw, 220/380 volt (ex), var.sp. drive, on stainless steel frame, with switch, floorspace 2,7x1,5 m, total height 2,6 m, weight 1900 kg, extra specifications - housing dia. 700x2150mm, capacity 950 ltr (vac/8 bar)vacuum belt filtersfilters > vacuum belt filters VACUUM BELT FILTER IN PRESSURE TIGHT HOUSING (1X), MAKE PANNEVIS, TYPE RT/PT PILOT, NO 1529, NEW 1990, MATERIAL STAINLESS STEEL (1.4571) + POLYPROPYLENE, FILTER SURFACE 0,1 M2, FILTER WIDTH 100MM, FILTER LENGTH 1000MM, WITH MOTOR 0,12 KW, 380 VOLT (EX), WITH VARIABLE SPEED DRIVE, KNIFE DISCHARGE, WITH VACUUM PUMP MAKE SIHI, TYPE LPHE-40106, MOTOR 3,5 KW, 380 VOLT (EX), WITH VACUUM TANK (3X), WITH LIQUID PUMP (HOSE PUMP 3X), MOTOR 3X 0,25 KW, 220/380 VOLT (EX), VAR.SP. DRIVE, ON STAINLESS STEEL FRAME, WITH SWITCH, FLOORSPACE 2,7X1,5 M, TOTAL HEIGHT 2,6 M, WEIGHT 1900 KG, EXTRA SPECIFICATIONS - HOUSING DIA. 700X2150MM, CAPACITY 950 LTR (VAC/8 BAR)VACUUM BELT FILTERSFILTERS > VACUUM BELT FILTERS
Vendedor: Foeth
Año de construcción: usado
Precio: 100 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 3.900 €
Ubicación: Land-de Germany, 46325 Borken
Vendedor: Komplett-Konzept Verwertungs GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more SIHI types: