33 ofertas

Año de construcción: usado
Ubicación: Land-sipa ecs 10000 injection stretch blow moulding
sipa pet preform injection / stretch blow molding machine  
produces 20 preforms per side x 2 = 40 cavities
approximately 10 00 units per hour. 
included preform mould for 250ml 
neck finish pco 1810
output : 10,000 bph
in excellent working condition

complete with tec tote preform conveyor and tote filler.   SIPA ECS 10000 INJECTION STRETCH BLOW MOULDING SIPA PET PREFORM INJECTION / STRETCH BLOW MOLDING MACHINE PRODUCES 20 PREFORMS PER SIDE X 2 = 40 CAVITIES APPROXIMATELY 10 00 UNITS PER HOUR. INCLUDED PREFORM MOULD FOR 250ML NECK FINISH PCO 1810 OUTPUT : 10,000 BPH IN EXCELLENT WORKING CONDITION COMPLETE WITH TEC TOTE PREFORM CONVEYOR AND TOTE FILLER.
Vendedor: Optimisense LLC
Año de construcción: usado
Precio: used machinery auction RESALE 640 €
Ubicación: Land-weight approx.: 300 kg<br/>dimensions (l x w x h) approx.: 1300 x 700 x 2000 mm<br/>description: altezza max di lavoro circa 180 mm WEIGHT APPROX.: 300 KG
DIMENSIONS (L X W X H) APPROX.: 1300 X 700 X 2000 MM
DESCRIPTION: ALTEZZA MAX DI LAVORO CIRCA 180 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-punching and shearing plant voortman

capacity steel - long: 6,200 mm
-width: 50-500 mm
-thickness: 5-25 mm
 	 
angle steel - long: 12,200 mm
-width / height: 50 x 50 - 150 x 150 mm
-thickness (max): 15 mm
 	 
punching machine voortman vp 1000
punching power: 100 ton
punching capacity: ã? 30 in 26 mm
number of punching: 3 units
 	 
horizontal punch punching power: 40 ton
punching capacity: ã? 15 mm 21
 	 
1800 scissors voortman vps
cutting capacity: 180 clay
cutting capacity: 500 x 22 mm (lxd)
cutting angle: +/-45 â°
 	 
angle scissors voortman vhs 1800
cutting capacity: 180 clay
cutting capacity: 150 x 150 x 15 mm (lxwxh)
 	 
coding system coding disc: 1
letters: 12
 	 
delivery system lange: 12,200 mm
delivery car: with material clamping
 	 
dissipation system lange: 11.000 mm
 	  PUNCHING AND SHEARING PLANT VOORTMAN CAPACITY STEEL - LONG: 6,200 MM -WIDTH: 50-500 MM -THICKNESS: 5-25 MM ANGLE STEEL - LONG: 12,200 MM -WIDTH / HEIGHT: 50 X 50 - 150 X 150 MM -THICKNESS (MAX): 15 MM PUNCHING MACHINE VOORTMAN VP 1000 PUNCHING POWER: 100 TON PUNCHING CAPACITY: &ATILDE;? 30 IN 26 MM NUMBER OF PUNCHING: 3 UNITS HORIZONTAL PUNCH PUNCHING POWER: 40 TON PUNCHING CAPACITY: &ATILDE;? 15 MM 21 1800 SCISSORS VOORTMAN VPS CUTTING CAPACITY: 180 CLAY CUTTING CAPACITY: 500 X 22 MM (LXD) CUTTING ANGLE: +/-45 &ACIRC;&DEG; ANGLE SCISSORS VOORTMAN VHS 1800 CUTTING CAPACITY: 180 CLAY CUTTING CAPACITY: 150 X 150 X 15 MM (LXWXH) CODING SYSTEM CODING DISC: 1 LETTERS: 12 DELIVERY SYSTEM LANGE: 12,200 MM DELIVERY CAR: WITH MATERIAL CLAMPING DISSIPATION SYSTEM LANGE: 11.000 MM
Vendedor: Valk Machines B.V.
Año de construcción: usado
Precio: 220 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-thermoformeusse pozzo 
format : 700x500mm
année : 1995
emboutissage: 280 mm
équipée d'un massicot

elle est adaptée au prototypage, petites et moyennes series
utilisation de toutes les matières thermoformables

machine pour la production de pièces plastiques comme :
-emballage legers, blisters
emballages pharmaceutiques
emballages alimentaires
plateaux de manutention
callages techniques et robotiques
presentoirs pour plv
capots de machines
skin pack


illig, kiefel, arburg, battenfeld, billion, demag, dk, engel, fischer, husky, ads, krauss maffei, margarit, negri bossi, netstal, sandretto, windsor, amut, andouard, baston, samafor, tecnova, vobau, illig, cb concept, automa, bekum, krupp, magic, mag, putian, sipa,uniloy comec etc.

snvi energy graphic sasu
siÈge social : 22 rue du camp - 93230 romainville - france 
tel : 01 57 14 99 19 / mobile : 06 88 07 09 64  

 THERMOFORMEUSSE POZZO FORMAT : 700X500MM ANNéE : 1995 EMBOUTISSAGE: 280 MM éQUIPéE D'UN MASSICOT ELLE EST ADAPTéE AU PROTOTYPAGE, PETITES ET MOYENNES SERIES UTILISATION DE TOUTES LES MATIèRES THERMOFORMABLES MACHINE POUR LA PRODUCTION DE PIèCES PLASTIQUES COMME : -EMBALLAGE LEGERS, BLISTERS EMBALLAGES PHARMACEUTIQUES EMBALLAGES ALIMENTAIRES PLATEAUX DE MANUTENTION CALLAGES TECHNIQUES ET ROBOTIQUES PRESENTOIRS POUR PLV CAPOTS DE MACHINES SKIN PACK ILLIG, KIEFEL, ARBURG, BATTENFELD, BILLION, DEMAG, DK, ENGEL, FISCHER, HUSKY, ADS, KRAUSS MAFFEI, MARGARIT, NEGRI BOSSI, NETSTAL, SANDRETTO, WINDSOR, AMUT, ANDOUARD, BASTON, SAMAFOR, TECNOVA, VOBAU, ILLIG, CB CONCEPT, AUTOMA, BEKUM, KRUPP, MAGIC, MAG, PUTIAN, SIPA,UNILOY COMEC ETC. SNVI ENERGY GRAPHIC SASU SIÈGE SOCIAL : 22 RUE DU CAMP - 93230 ROMAINVILLE - FRANCE TEL : 01 57 14 99 19 / MOBILE : 06 88 07 09 64
Vendedor: SNVI ENERGY
Año de construcción: usado
Precio: 250 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 29.900 €
Ubicación: Land-schneider electric inverter, atv960c40q4x1, in the control cabinet, 400kw, 400v-ip21 altivar series process atv900, rodukt or component type inverter device application industry application short name of the appliance atv960 destination product induction motors synchronous motors construction floor cabinet, compact design supplied equipment housing for spacial sf graphic control unit in the housing door inverter main switch mains choke for main supply terminal strip terminal strip for motor you/dt-filter choke cable bottom color of the panel light grey ral 7035 protection degree (ip) ip23 complies with iec 61800-5-1 cooling type forced-air cooling nominal auxiliary voltage [uh, nom] 380... 415 v (-10...6%) mains frequency 50/60 hz (+/-5%) number of phases of power 3-phase overvoltage category iii type motor control asynchronous motor constant variable torque optimized mode of torque control profile for synchronous motors permanent magnet motor output voltage &lt; = supply voltage permissible temporary current gain 1.2 x in for 60 s (standard overload) 1.5 x in for 60 s (high overload) rated clock frequency of 2.5 of khz clock frequency 2... 8 khz adjustable with derating factor output frequency 0.1.. 500 hz motor power (kw) 400 kw (standard overload) 315 kw (high overload) output rated current 730 a at 2.5 of khz (standard overload) 590 a at 2.5 khz (high overload) ac 681 a isc = 50 for 400 v (normal duty) 545 a isc ka 50 ka at 400 v (heavy duty) apparent power kva = 472 kva at 400 v (standard overload) 378  at 400 v (high overload) thdi &lt; = 43% upstream full load according to iec 61000-3-12 short circuit protection: 800 a gg upstream fuse (standard overload): 630 a gg backup (high overload) internal: 315 a 3 ar backup energy efficiency &gt; = 0.98 w dissipated 9900 w total () normal duty) 7370 w total (heavy duty) 1120 w control part (normal duty) 770 w (high overload) cooling air volume control part 280 m3/h for control 1740 m3/h for output noise level 71 db 86/188/eec - physical agents (noise) directive network short-circuit current 50 ka for 100 ms electrical connection control: _test removable screw terminals 0, 5...1, 5 mmâ² main voltage supply: _test rail m12 engine: _test rail m12 recommended cable cross section motor 3 x (3 x 120 mm 2) (high overload) 3 x (3 x 185 mm â²) (standard overload) 4 x (3 x 120 mmâ²) () standard overload) 4 x (3 x 95 mm 2) (high overload) cable construction 4 x (3 x 150 mm 2) (default overload) 3 x (3 x 150 mm 2) (high overload) 4 x (3 x 95 mm 2) (high overload) width 800 mm height 2150 mm length 664 mm product weight 650 kg logic input 16 preset speeds kommunikationspro ethernet/ip protocol, modbus, serial modbus tcp SCHNEIDER ELECTRIC INVERTER, ATV960C40Q4X1, IN THE CONTROL CABINET, 400KW, 400V-IP21 ALTIVAR SERIES PROCESS ATV900, RODUKT OR COMPONENT TYPE INVERTER DEVICE APPLICATION INDUSTRY APPLICATION SHORT NAME OF THE APPLIANCE ATV960 DESTINATION PRODUCT INDUCTION MOTORS SYNCHRONOUS MOTORS CONSTRUCTION FLOOR CABINET, COMPACT DESIGN SUPPLIED EQUIPMENT HOUSING FOR SPACIAL SF GRAPHIC CONTROL UNIT IN THE HOUSING DOOR INVERTER MAIN SWITCH MAINS CHOKE FOR MAIN SUPPLY TERMINAL STRIP TERMINAL STRIP FOR MOTOR YOU/DT-FILTER CHOKE CABLE BOTTOM COLOR OF THE PANEL LIGHT GREY RAL 7035 PROTECTION DEGREE (IP) IP23 COMPLIES WITH IEC 61800-5-1 COOLING TYPE FORCED-AIR COOLING NOMINAL AUXILIARY VOLTAGE [UH, NOM] 380... 415 V (-10...6%) MAINS FREQUENCY 50/60 HZ (+/-5%) NUMBER OF PHASES OF POWER 3-PHASE OVERVOLTAGE CATEGORY III TYPE MOTOR CONTROL ASYNCHRONOUS MOTOR CONSTANT VARIABLE TORQUE OPTIMIZED MODE OF TORQUE CONTROL PROFILE FOR SYNCHRONOUS MOTORS PERMANENT MAGNET MOTOR OUTPUT VOLTAGE &LT; = SUPPLY VOLTAGE PERMISSIBLE TEMPORARY CURRENT GAIN 1.2 X IN FOR 60 S (STANDARD OVERLOAD) 1.5 X IN FOR 60 S (HIGH OVERLOAD) RATED CLOCK FREQUENCY OF 2.5 OF KHZ CLOCK FREQUENCY 2... 8 KHZ ADJUSTABLE WITH DERATING FACTOR OUTPUT FREQUENCY 0.1.. 500 HZ MOTOR POWER (KW) 400 KW (STANDARD OVERLOAD) 315 KW (HIGH OVERLOAD) OUTPUT RATED CURRENT 730 A AT 2.5 OF KHZ (STANDARD OVERLOAD) 590 A AT 2.5 KHZ (HIGH OVERLOAD) AC 681 A ISC = 50 FOR 400 V (NORMAL DUTY) 545 A ISC KA 50 KA AT 400 V (HEAVY DUTY) APPARENT POWER KVA = 472 KVA AT 400 V (STANDARD OVERLOAD) 378 AT 400 V (HIGH OVERLOAD) THDI &LT; = 43% UPSTREAM FULL LOAD ACCORDING TO IEC 61000-3-12 SHORT CIRCUIT PROTECTION: 800 A GG UPSTREAM FUSE (STANDARD OVERLOAD): 630 A GG BACKUP (HIGH OVERLOAD) INTERNAL: 315 A 3 AR BACKUP ENERGY EFFICIENCY &GT; = 0.98 W DISSIPATED 9900 W TOTAL () NORMAL DUTY) 7370 W TOTAL (HEAVY DUTY) 1120 W CONTROL PART (NORMAL DUTY) 770 W (HIGH OVERLOAD) COOLING AIR VOLUME CONTROL PART 280 M3/H FOR CONTROL 1740 M3/H FOR OUTPUT NOISE LEVEL 71 DB 86/188/EEC - PHYSICAL AGENTS (NOISE) DIRECTIVE NETWORK SHORT-CIRCUIT CURRENT 50 KA FOR 100 MS ELECTRICAL CONNECTION CONTROL: _TEST REMOVABLE SCREW TERMINALS 0, 5...1, 5 MM&ACIRC;&SUP2; MAIN VOLTAGE SUPPLY: _TEST RAIL M12 ENGINE: _TEST RAIL M12 RECOMMENDED CABLE CROSS SECTION MOTOR 3 X (3 X 120 MM 2) (HIGH OVERLOAD) 3 X (3 X 185 MM &ACIRC;&SUP2;) (STANDARD OVERLOAD) 4 X (3 X 120 MM&ACIRC;&SUP2;) () STANDARD OVERLOAD) 4 X (3 X 95 MM 2) (HIGH OVERLOAD) CABLE CONSTRUCTION 4 X (3 X 150 MM 2) (DEFAULT OVERLOAD) 3 X (3 X 150 MM 2) (HIGH OVERLOAD) 4 X (3 X 95 MM 2) (HIGH OVERLOAD) WIDTH 800 MM HEIGHT 2150 MM LENGTH 664 MM PRODUCT WEIGHT 650 KG LOGIC INPUT 16 PRESET SPEEDS KOMMUNIKATIONSPRO ETHERNET/IP PROTOCOL, MODBUS, SERIAL MODBUS TCP
Vendedor: KRASTEV EX-IMPORT
Año de construcción: usado
Precio: 290 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 149 €
Ubicación: Land-the portable lcr measuring instruments of series u1730c of keysight skills, usually only linked table instruments in connection. the measurement is faster by identifying with a simple touch of a button. mobile measurements are made easier by a battery that keeps for up to 16 hours. the portable lcr measuring instruments allow the inspection of component types including secondary components of the dielectric dissipation factor (d), of the quality factor (q) and the angle display of impedance (î¸). they include functions that lead to a more detailed analysis of the components. thus helping the built-in function for replacement series resistance (esr) this across better to understand the resistance behavior of capacitors over selected frequencies.

resolution 20,000 digits
0.2% basic accuracy
large areas of lcr
automatic detection (ai) and display the component type and measurements
detailed analysis of components
ir-to-usb connectivity for data logging on pc

capacity max. 20mf
measuring resistance max 200 mî©
inductance of max 2000 h
battery life 16 h
9 v battery type
table/hand handheld
lcd display type
power supply battery, network operation
size 41 x 87 x 184mm
weight 337 g
height 184mm
length 41mm
operating temperature of max + 55 â° c
operating temperature-10 â° c minimum
width 87mm
model number u1731c

new device.
price per piece.
7 pieces available.

6 pcs. - in its original packaging.
a device used in short without original packaging

7 devices were purchased by us. then, it was found that the devices for our intended purposes were not suitable.

sell disclaimer of warranty. THE PORTABLE LCR MEASURING INSTRUMENTS OF SERIES U1730C OF KEYSIGHT SKILLS, USUALLY ONLY LINKED TABLE INSTRUMENTS IN CONNECTION. THE MEASUREMENT IS FASTER BY IDENTIFYING WITH A SIMPLE TOUCH OF A BUTTON. MOBILE MEASUREMENTS ARE MADE EASIER BY A BATTERY THAT KEEPS FOR UP TO 16 HOURS. THE PORTABLE LCR MEASURING INSTRUMENTS ALLOW THE INSPECTION OF COMPONENT TYPES INCLUDING SECONDARY COMPONENTS OF THE DIELECTRIC DISSIPATION FACTOR (D), OF THE QUALITY FACTOR (Q) AND THE ANGLE DISPLAY OF IMPEDANCE (&ICIRC;&CEDIL;). THEY INCLUDE FUNCTIONS THAT LEAD TO A MORE DETAILED ANALYSIS OF THE COMPONENTS. THUS HELPING THE BUILT-IN FUNCTION FOR REPLACEMENT SERIES RESISTANCE (ESR) THIS ACROSS BETTER TO UNDERSTAND THE RESISTANCE BEHAVIOR OF CAPACITORS OVER SELECTED FREQUENCIES. RESOLUTION 20,000 DIGITS 0.2% BASIC ACCURACY LARGE AREAS OF LCR AUTOMATIC DETECTION (AI) AND DISPLAY THE COMPONENT TYPE AND MEASUREMENTS DETAILED ANALYSIS OF COMPONENTS IR-TO-USB CONNECTIVITY FOR DATA LOGGING ON PC CAPACITY MAX. 20MF MEASURING RESISTANCE MAX 200 M&ICIRC;© INDUCTANCE OF MAX 2000 H BATTERY LIFE 16 H 9 V BATTERY TYPE TABLE/HAND HANDHELD LCD DISPLAY TYPE POWER SUPPLY BATTERY, NETWORK OPERATION SIZE 41 X 87 X 184MM WEIGHT 337 G HEIGHT 184MM LENGTH 41MM OPERATING TEMPERATURE OF MAX + 55 &ACIRC;&DEG; C OPERATING TEMPERATURE-10 &ACIRC;&DEG; C MINIMUM WIDTH 87MM MODEL NUMBER U1731C NEW DEVICE. PRICE PER PIECE. 7 PIECES AVAILABLE. 6 PCS. - IN ITS ORIGINAL PACKAGING. A DEVICE USED IN SHORT WITHOUT ORIGINAL PACKAGING 7 DEVICES WERE PURCHASED BY US. THEN, IT WAS FOUND THAT THE DEVICES FOR OUR INTENDED PURPOSES WERE NOT SUITABLE. SELL DISCLAIMER OF WARRANTY.
Vendedor: BOGE KOMPRESSOREN Otto Boge GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 450 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.:  600 x 1100 x2000  mm<br/>description: see pictures WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 1100 X2000 MM
DESCRIPTION: SEE PICTURES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-

 used water treatment, bottling lines and auxiliary equipment.
details of the machine line are in the file


              equipment list:

•	5-gallon line  - 2010
•	5l line equipment – 2009-2010
•	ammonia refrigeration – 2009
•	water tanks: 50m3 –  30m3 – tbd
•	sipa (retail 0.5l-1.0l-1.5l line) – 2002 
•	wt & cip equipment – tbd
•	deep well equipment – tbd




 USED WATER TREATMENT, BOTTLING LINES AND AUXILIARY EQUIPMENT. DETAILS OF THE MACHINE LINE ARE IN THE FILE EQUIPMENT LIST: • 5-GALLON LINE - 2010 • 5L LINE EQUIPMENT – 2009-2010 • AMMONIA REFRIGERATION – 2009 • WATER TANKS: 50M3 – 30M3 – TBD • SIPA (RETAIL 0.5L-1.0L-1.5L LINE) – 2002 • WT & CIP EQUIPMENT – TBD • DEEP WELL EQUIPMENT – TBD
Vendedor: Ozbek Machinery Trade
Año de construcción: usado
Precio: used machinery auction RESALE 350 €
Ubicación: Land-weight approx.: 800 kg<br/>dimensions (l x w x h) approx.: 1500 x 1500 x 2400 mm<br/>description: diameter flywheel 700 mm WEIGHT APPROX.: 800 KG
DIMENSIONS (L X W X H) APPROX.: 1500 X 1500 X 2400 MM
DESCRIPTION: DIAMETER FLYWHEEL 700 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 52.000 €
Ubicación: Land-description
brand	sipa
model	sf8 3
id	870
status	active
price	52.000 € + vat
year of manufacture	2003
fuel	electric
working hours	45.746 ore
location	bucuresti, romania

container size (max.): 7 l
output: 2000 u/h
preform feed system:yes 3
neck: 48
number of cavities: 3
materials:pet
heating zones: 8
linear blow molder sipa sf 8/3

basic machine refurbished in 2008
- soundproof and safety cabin
- bottle discharging connection to the line on table-top conveyors
- electrial cabinet with operator interface module
- one set of blowing mouds for 5 litre cylindrical bottles
- the machinery has 45746 working hours and neck of 48 mm

contact
tel.: +40-359/175.575
fax: +40-259/426.248
mobil: +40-743/177.040 ; +40-740/221.698

technical inspection can be organized at least 24 hrs before the due date

we speak english. wir sprechen deutsch. (+40-740/221.698 )
hablamos español. beszélünk magyarul. (+40-743/177.040 )

irrtum, anderungen und zwischenverkauf vorbehalten /
subject to errors, changes and prior sale /
ne rezervam dreptul la greseli, modificari si vanzare prealabila.   DESCRIPTION BRAND SIPA MODEL SF8 3 ID 870 STATUS ACTIVE PRICE 52.000 € + VAT YEAR OF MANUFACTURE 2003 FUEL ELECTRIC WORKING HOURS 45.746 ORE LOCATION BUCURESTI, ROMANIA CONTAINER SIZE (MAX.): 7 L OUTPUT: 2000 U/H PREFORM FEED SYSTEM:YES 3 NECK: 48 NUMBER OF CAVITIES: 3 MATERIALS:PET HEATING ZONES: 8 LINEAR BLOW MOLDER SIPA SF 8/3 BASIC MACHINE REFURBISHED IN 2008 - SOUNDPROOF AND SAFETY CABIN - BOTTLE DISCHARGING CONNECTION TO THE LINE ON TABLE-TOP CONVEYORS - ELECTRIAL CABINET WITH OPERATOR INTERFACE MODULE - ONE SET OF BLOWING MOUDS FOR 5 LITRE CYLINDRICAL BOTTLES - THE MACHINERY HAS 45746 WORKING HOURS AND NECK OF 48 MM CONTACT TEL.: +40-359/175.575 FAX: +40-259/426.248 MOBIL: +40-743/177.040 ; +40-740/221.698 TECHNICAL INSPECTION CAN BE ORGANIZED AT LEAST 24 HRS BEFORE THE DUE DATE WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. (+40-740/221.698 ) HABLAMOS ESPAñOL. BESZéLüNK MAGYARUL. (+40-743/177.040 ) IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Ubicación: Land-weight approx.: 250 kg<br/>dimensions (l x w x h) approx.: 950 x 700 x 1900 mm<br/>description: internal reference 644.083, vertical stroke 180 mm, longitudinal stroke 130 mm, transverse stroke head 80 mm, swiveling head, motor 1.84 kw-2800 rpm, tilting table dimensions 500 x 150 mm WEIGHT APPROX.: 250 KG
DIMENSIONS (L X W X H) APPROX.: 950 X 700 X 1900 MM
DESCRIPTION: INTERNAL REFERENCE 644.083, VERTICAL STROKE 180 MM, LONGITUDINAL STROKE 130 MM, TRANSVERSE STROKE HEAD 80 MM, SWIVELING HEAD, MOTOR 1.84 KW-2800 RPM, TILTING TABLE DIMENSIONS 500 X 150 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-make: sipa
type: ecs-fx 12 / 40
year of construction: 2004
capacity: 16,000 bottle per hour
granules
standard 32 mm pet screw cap MAKE: SIPA TYPE: ECS-FX 12 / 40 YEAR OF CONSTRUCTION: 2004 CAPACITY: 16,000 BOTTLE PER HOUR GRANULES STANDARD 32 MM PET SCREW CAP
Vendedor: Mazuba GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 350 €
Ubicación: Land-weight approx.: 800 kg<br/>dimensions (l x w x h) approx.: 1500 x 1500 x 2400 mm<br/>description: diameter flywheel 800 mm WEIGHT APPROX.: 800 KG
DIMENSIONS (L X W X H) APPROX.: 1500 X 1500 X 2400 MM
DESCRIPTION: DIAMETER FLYWHEEL 800 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-mineral water filling plant

manufacture year: 2008
 
technical specifications:
•	output:13000 bph
•	bottle  sizes:0.25 to 3.0 lt
•	material:pet

the line includes the following machines

-blow moulding machine:sipa sfr 8. capacity:12000 bph
-compressor :atelier francoise  ce  46. capacity:1000 m3/hr
-cooling tower:baltimore
-cooler for blow moulding machine:frigomeccanica  mk 80
-dryer:hankinson  hpet 3-700
-air tank :evapco
-air conveyors:zecchetti. length: 80 m
-air recovery system:yes   
-rinser filler capper:sipa berrchi. 40  50  10. capper:arol  10 heads
-labeller:sacmi opera  200 rf  12/sr/e1. type:roll fed
-laser printer:videojet
-nitrogen system:vbs
-divider:yes
-cip:padovan tmci
-shrink wrapper:dimac  greenstar  f 1826
-handle applicator:twin pack  m.d.e.l. genius 
-automatic wrapping machine:atlanta revolution 
-conveyors system for bottles and packages:yes
-uv sterilization system:hanovia 3.5 kw
-filter bag housing:2
-filter  cartridge housing 8 position:1
-filter cartridge housing 12 position:1
-moulds: 0.5 lt  1.0 lt   1.5 lt   2.0 lt :included
-2.0 lt: square bottle
 MINERAL WATER FILLING PLANT MANUFACTURE YEAR: 2008 TECHNICAL SPECIFICATIONS: • OUTPUT:13000 BPH • BOTTLE SIZES:0.25 TO 3.0 LT • MATERIAL:PET THE LINE INCLUDES THE FOLLOWING MACHINES -BLOW MOULDING MACHINE:SIPA SFR 8. CAPACITY:12000 BPH -COMPRESSOR :ATELIER FRANCOISE CE 46. CAPACITY:1000 M3/HR -COOLING TOWER:BALTIMORE -COOLER FOR BLOW MOULDING MACHINE:FRIGOMECCANICA MK 80 -DRYER:HANKINSON HPET 3-700 -AIR TANK :EVAPCO -AIR CONVEYORS:ZECCHETTI. LENGTH: 80 M -AIR RECOVERY SYSTEM:YES -RINSER FILLER CAPPER:SIPA BERRCHI. 40 50 10. CAPPER:AROL 10 HEADS -LABELLER:SACMI OPERA 200 RF 12/SR/E1. TYPE:ROLL FED -LASER PRINTER:VIDEOJET -NITROGEN SYSTEM:VBS -DIVIDER:YES -CIP:PADOVAN TMCI -SHRINK WRAPPER:DIMAC GREENSTAR F 1826 -HANDLE APPLICATOR:TWIN PACK M.D.E.L. GENIUS -AUTOMATIC WRAPPING MACHINE:ATLANTA REVOLUTION -CONVEYORS SYSTEM FOR BOTTLES AND PACKAGES:YES -UV STERILIZATION SYSTEM:HANOVIA 3.5 KW -FILTER BAG HOUSING:2 -FILTER CARTRIDGE HOUSING 8 POSITION:1 -FILTER CARTRIDGE HOUSING 12 POSITION:1 -MOULDS: 0.5 LT 1.0 LT 1.5 LT 2.0 LT :INCLUDED -2.0 LT: SQUARE BOTTLE
Vendedor: KOSMOS ENERGEIA
Año de construcción: usado
Precio: used machinery auction RESALE 400 €
Ubicación: Land-weight approx.: 250 kg<br/>dimensions (l x w x h) approx.: 900 x 850 x 2000 mm<br/>description: mortise thickness 180 mm. WEIGHT APPROX.: 250 KG
DIMENSIONS (L X W X H) APPROX.: 900 X 850 X 2000 MM
DESCRIPTION: MORTISE THICKNESS 180 MM.
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 65 €
Ubicación: Land-; stock / ready ; STOCK / READY
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Ubicación: Land-number of sanding units: 2 st.<br/>sanding width: 190 mm<br/>sanding height max.: 4 - 150 mm<br/>dimensions (l/w/h): 2000x1300x2200 mm<br/>weight: 1900 kg<br/>single wood grinding machine hess junior<br/><br/>with inlet roller conveyor 2600 mm and outlet roller conveyor 1600 mm<br/><br/>basic structure:<br/>sturdy, heavy welded construction made of thick-walled rectangular hollow <br/>sections<br/>with additional, statically calculated stiffeners for optimal<br/>vibration damping.<br/><br/>offset arranged grinding units with large dimensions<br/>belt drive drums for slip-free belt travel. two-point suction for<br/>direct and exhaust dust extraction with integrated blow-off device.<br/>heavy steel plate grinding units as a basis for<br/>vibration damped, quiet tape running. all guides as ball linear set<br/>on hardened and ground waves. permanent precision through<br/>dust and dirt lock of ball lens sets. contact roller and sanding pad<br/>in balance with the grinding belt grain load. the<br/>large drive drums guarantee full transmission of the<br/>5.5 kw drive power of the grinding motors on the grinding belt. thereby<br/>strongest chip removal possible. automatic machine stop triggering at<br/>bandriß. optical display on operator panel. sanding pad for finish off<br/>special material with optimal heat dissipation and additional<br/>gleitbelagauflage. easy handling when changing pads. sanding belt tension<br/>via appropriately sized compression springs. sanding belt relaxation for<br/>band change by means of pneumatic device for sensitive, distortion-free<br/>laying new ribbons.<br/>upper grinding unit and brush device (additional equipment) central<br/>adjustable by motor.<br/>wooden guide in the inlet area for hard, both sides mounted guide and<br/>pressure rollers. non-tilting transport of profiled workpieces<br/>calibrated conveyor belts with infinitely adjustable<br/>feed speed.<br/><br/>automatic machine stop triggering by wood thickness control device.<br/>optical display of the operator panel.<br/><br/>infeed table via finely detailed, precise threaded spindle for lower<br/>abrasive chip removal via scale (resolution 0.1 mm) manually adjustable. the<br/>long pillar table guide guarantees absolute parallel adjustment. the<br/>circuit tuning to the outlet table is by adjusting the height of the lower<br/>sanding units via precise threaded spindle and scale display (resolution 0.1<br/>mm) accomplished.<br/><br/>clear, user-friendly arrangement of all electrical functional,<br/>operating and display elements on the machine front: grinding unit below,<br/>top of the loop unit, workpiece transport unit,<br/>sanding thickness adjustment, brush direction top / bottom, tape usage,<br/>operating display, fault indicator. all motors are electric against overload<br/>hedged.<br/><br/>technical specifications :<br/><br/>grinding belt speed: 25 m / sec.<br/>grinding width: 190 mm<br/>abrasive thickness: 4 - 150 mm<br/>shortest workpiece length: 280 mm<br/>feed speed, continuously adjustable 5 - 25 m / min.<br/>sanding belt dimensions: 200 mm width, 1850 mm length<br/><br/>electrical equipment according to vde<br/>electrical connection: 400 v., 3 / n, 50 hz.<br/>pneumatic connection: r 3/8 , 6 bar, 80 nl grinding units: 2 x 5.5 kw<br/>feed: 0.75 kw height adjustment: 0.18 kw<br/>pneumatic connection: r 3/8 , 80 nl, min 6 bar, max 8 bar<br/>extraction rate: 2 x 2000 to 2500 m3 / h 20 - 25 m / sec.<br/>exhaust connection: 2 x 180 mm diameter, at the top of the machine housing<br/>total power: 14 kw<br/><br/>external dimensions: without control cabinet 1750 mm width 1850 mm height 1000 <br/>mm depth<br/>with control cabinet: 1960 mm width 1850 mm height 1000 mm depth<br/>working height: 835 mm<br/>in the range 4-20 mm only without guide ruler<br/><br/>additional equipment:<br/><br/>1 digital display f. motorized grinding thickness adjustment<br/>1 scanning device for wood thickness determination in the inlet of the machine<br/><br/>1 device for oscill. abrasive belt utilization device for oscillating<br/>grinding belt utilization to increase the service life of the grinding belts <br/>and improve<br/>the surface finish by motor-driven grinding aggregate adjustment.<br/>connected load: 0.12 kw, 380 v, 3 / n, 50 hz<br/><br/>1 brushing and finishing device, for better surface finish, integrated in<br/>the basic machine. two superimposed special brush rollers 150 mm<br/>diameter in synchronism with the feed. separate height adjustment of the<br/>brush rollers on precise slide guides for wear correction.<br/>additional transport roller for removal and further transport of the workpiece<br/>the grinding machine, coupled with the conveyor belt.<br/>electrical connection: 1.5 kw, 400 volt, 50 hz.<br/>in and out roller conveyor<br/><br/>(technical data according to the manufacturer, without guarantee!)<br/><br/><br/><br/><br/> NUMBER OF SANDING UNITS: 2 ST.
SANDING WIDTH: 190 MM
SANDING HEIGHT MAX.: 4 - 150 MM
DIMENSIONS (L/W/H): 2000X1300X2200 MM
WEIGHT: 1900 KG
SINGLE WOOD GRINDING MACHINE HESS JUNIOR

WITH INLET ROLLER CONVEYOR 2600 MM AND OUTLET ROLLER CONVEYOR 1600 MM

BASIC STRUCTURE:
STURDY, HEAVY WELDED CONSTRUCTION MADE OF THICK-WALLED RECTANGULAR HOLLOW
SECTIONS
WITH ADDITIONAL, STATICALLY CALCULATED STIFFENERS FOR OPTIMAL
VIBRATION DAMPING.

OFFSET ARRANGED GRINDING UNITS WITH LARGE DIMENSIONS
BELT DRIVE DRUMS FOR SLIP-FREE BELT TRAVEL. TWO-POINT SUCTION FOR
DIRECT AND EXHAUST DUST EXTRACTION WITH INTEGRATED BLOW-OFF DEVICE.
HEAVY STEEL PLATE GRINDING UNITS AS A BASIS FOR
VIBRATION DAMPED, QUIET TAPE RUNNING. ALL GUIDES AS BALL LINEAR SET
ON HARDENED AND GROUND WAVES. PERMANENT PRECISION THROUGH
DUST AND DIRT LOCK OF BALL LENS SETS. CONTACT ROLLER AND SANDING PAD
IN BALANCE WITH THE GRINDING BELT GRAIN LOAD. THE
LARGE DRIVE DRUMS GUARANTEE FULL TRANSMISSION OF THE
5.5 KW DRIVE POWER OF THE GRINDING MOTORS ON THE GRINDING BELT. THEREBY
STRONGEST CHIP REMOVAL POSSIBLE. AUTOMATIC MACHINE STOP TRIGGERING AT
BANDRIß. OPTICAL DISPLAY ON OPERATOR PANEL. SANDING PAD FOR FINISH OFF
SPECIAL MATERIAL WITH OPTIMAL HEAT DISSIPATION AND ADDITIONAL
GLEITBELAGAUFLAGE. EASY HANDLING WHEN CHANGING PADS. SANDING BELT TENSION
VIA APPROPRIATELY SIZED COMPRESSION SPRINGS. SANDING BELT RELAXATION FOR
BAND CHANGE BY MEANS OF PNEUMATIC DEVICE FOR SENSITIVE, DISTORTION-FREE
LAYING NEW RIBBONS.
UPPER GRINDING UNIT AND BRUSH DEVICE (ADDITIONAL EQUIPMENT) CENTRAL
ADJUSTABLE BY MOTOR.
WOODEN GUIDE IN THE INLET AREA FOR HARD, BOTH SIDES MOUNTED GUIDE AND
PRESSURE ROLLERS. NON-TILTING TRANSPORT OF PROFILED WORKPIECES
CALIBRATED CONVEYOR BELTS WITH INFINITELY ADJUSTABLE
FEED SPEED.

AUTOMATIC MACHINE STOP TRIGGERING BY WOOD THICKNESS CONTROL DEVICE.
OPTICAL DISPLAY OF THE OPERATOR PANEL.

INFEED TABLE VIA FINELY DETAILED, PRECISE THREADED SPINDLE FOR LOWER
ABRASIVE CHIP REMOVAL VIA SCALE (RESOLUTION 0.1 MM) MANUALLY ADJUSTABLE. THE
LONG PILLAR TABLE GUIDE GUARANTEES ABSOLUTE PARALLEL ADJUSTMENT. THE
CIRCUIT TUNING TO THE OUTLET TABLE IS BY ADJUSTING THE HEIGHT OF THE LOWER
SANDING UNITS VIA PRECISE THREADED SPINDLE AND SCALE DISPLAY (RESOLUTION 0.1
MM) ACCOMPLISHED.

CLEAR, USER-FRIENDLY ARRANGEMENT OF ALL ELECTRICAL FUNCTIONAL,
OPERATING AND DISPLAY ELEMENTS ON THE MACHINE FRONT: GRINDING UNIT BELOW,
TOP OF THE LOOP UNIT, WORKPIECE TRANSPORT UNIT,
SANDING THICKNESS ADJUSTMENT, BRUSH DIRECTION TOP / BOTTOM, TAPE USAGE,
OPERATING DISPLAY, FAULT INDICATOR. ALL MOTORS ARE ELECTRIC AGAINST OVERLOAD
HEDGED.

TECHNICAL SPECIFICATIONS :

GRINDING BELT SPEED: 25 M / SEC.
GRINDING WIDTH: 190 MM
ABRASIVE THICKNESS: 4 - 150 MM
SHORTEST WORKPIECE LENGTH: 280 MM
FEED SPEED, CONTINUOUSLY ADJUSTABLE 5 - 25 M / MIN.
SANDING BELT DIMENSIONS: 200 MM WIDTH, 1850 MM LENGTH

ELECTRICAL EQUIPMENT ACCORDING TO VDE
ELECTRICAL CONNECTION: 400 V., 3 / N, 50 HZ.
PNEUMATIC CONNECTION: R 3/8 , 6 BAR, 80 NL GRINDING UNITS: 2 X 5.5 KW
FEED: 0.75 KW HEIGHT ADJUSTMENT: 0.18 KW
PNEUMATIC CONNECTION: R 3/8 , 80 NL, MIN 6 BAR, MAX 8 BAR
EXTRACTION RATE: 2 X 2000 TO 2500 M3 / H 20 - 25 M / SEC.
EXHAUST CONNECTION: 2 X 180 MM DIAMETER, AT THE TOP OF THE MACHINE HOUSING
TOTAL POWER: 14 KW

EXTERNAL DIMENSIONS: WITHOUT CONTROL CABINET 1750 MM WIDTH 1850 MM HEIGHT 1000
MM DEPTH
WITH CONTROL CABINET: 1960 MM WIDTH 1850 MM HEIGHT 1000 MM DEPTH
WORKING HEIGHT: 835 MM
IN THE RANGE 4-20 MM ONLY WITHOUT GUIDE RULER

ADDITIONAL EQUIPMENT:

1 DIGITAL DISPLAY F. MOTORIZED GRINDING THICKNESS ADJUSTMENT
1 SCANNING DEVICE FOR WOOD THICKNESS DETERMINATION IN THE INLET OF THE MACHINE

1 DEVICE FOR OSCILL. ABRASIVE BELT UTILIZATION DEVICE FOR OSCILLATING
GRINDING BELT UTILIZATION TO INCREASE THE SERVICE LIFE OF THE GRINDING BELTS
AND IMPROVE
THE SURFACE FINISH BY MOTOR-DRIVEN GRINDING AGGREGATE ADJUSTMENT.
CONNECTED LOAD: 0.12 KW, 380 V, 3 / N, 50 HZ

1 BRUSHING AND FINISHING DEVICE, FOR BETTER SURFACE FINISH, INTEGRATED IN
THE BASIC MACHINE. TWO SUPERIMPOSED SPECIAL BRUSH ROLLERS 150 MM
DIAMETER IN SYNCHRONISM WITH THE FEED. SEPARATE HEIGHT ADJUSTMENT OF THE
BRUSH ROLLERS ON PRECISE SLIDE GUIDES FOR WEAR CORRECTION.
ADDITIONAL TRANSPORT ROLLER FOR REMOVAL AND FURTHER TRANSPORT OF THE WORKPIECE
THE GRINDING MACHINE, COUPLED WITH THE CONVEYOR BELT.
ELECTRICAL CONNECTION: 1.5 KW, 400 VOLT, 50 HZ.
IN AND OUT ROLLER CONVEYOR

(TECHNICAL DATA ACCORDING TO THE MANUFACTURER, WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Precio: 36 €
Ubicación: -locker 2-piece metal locker locker steel locker with lock
-drip range sump with grating 200 l for 2 x 200.
-actuator belimo n.gif" alt="Land-we offer:

from a business resolution (food industry)

5 support suspension

herseteller: probably sipa italy
length: approx. 80 mm
(d) foot: 30 mm
thread: m16
with inner spring
width: 24

weight: approx. 500 g (5 units)

also possible retail. unit price eur9 per piece exw hall

state. used see photo, ready for action,

other feet (see photo) available.

furthermore we offer:

-drip range sump with grating 200 l for 2 x 200.
-horizontal grinder band cs411 200x75cm x 40 380v 2.2 kw...
-grundfos ups 65-120/2f 340 mm pump ~ 3 400v 850-1150w with angle seat valve 65pn6
-grundfos magna 65-60 f 340 mm energiesparpumpe / circulation pump with shut-off valve
-drip range sump with grating 200 l for 2 x 200.
-actuator belimo nv24a-mp-tpc of storage unused
-3-way globe valve belimo h550b from storage unused
-mtc wire electrode mt-alsi 5 s al 4043 1,2 mm 7 kg of solid wire
-thread cutting apparatus for external thread and machine vices
-color mixing container mixing tank agitator vessel of drais roll 60-500 l v2a steel.
-eccentric press hamilton 40skr, pressing force: 40 t
-thread cutter 1/4-1 "jopo 1 cssr no. b1574
-locker 2-piece metal locker locker steel locker with lock
-drip range sump with grating 200 l for 2 x 200.
-actuator belimo n" style="height: 18px;"> WE OFFER:

FROM A BUSINESS RESOLUTION (FOOD INDUSTRY)

5 SUPPORT SUSPENSION

HERSETELLER: PROBABLY SIPA ITALY
LENGTH: APPROX. 80 MM
(D) FOOT: 30 MM
THREAD: M16
WITH INNER SPRING
WIDTH: 24

WEIGHT: APPROX. 500 G (5 UNITS)

ALSO POSSIBLE RETAIL. UNIT PRICE EUR9 PER PIECE EXW HALL

STATE. USED SEE PHOTO, READY FOR ACTION,

OTHER FEET (SEE PHOTO) AVAILABLE.

FURTHERMORE WE OFFER:

-DRIP RANGE SUMP WITH GRATING 200 L FOR 2 X 200.
-HORIZONTAL GRINDER BAND CS411 200X75CM X 40 380V 2.2 KW...
-GRUNDFOS UPS 65-120/2F 340 MM PUMP ~ 3 400V 850-1150W WITH ANGLE SEAT VALVE 65PN6
-GRUNDFOS MAGNA 65-60 F 340 MM ENERGIESPARPUMPE / CIRCULATION PUMP WITH SHUT-OFF VALVE
-DRIP RANGE SUMP WITH GRATING 200 L FOR 2 X 200.
-ACTUATOR BELIMO NV24A-MP-TPC OF STORAGE UNUSED
-3-WAY GLOBE VALVE BELIMO H550B FROM STORAGE UNUSED
-MTC WIRE ELECTRODE MT-ALSI 5 S AL 4043 1,2 MM 7 KG OF SOLID WIRE
-THREAD CUTTING APPARATUS FOR EXTERNAL THREAD AND MACHINE VICES
-COLOR MIXING CONTAINER MIXING TANK AGITATOR VESSEL OF DRAIS ROLL 60-500 L V2A STEEL.
-ECCENTRIC PRESS HAMILTON 40SKR, PRESSING FORCE: 40 T
-THREAD CUTTER 1/4-1 "JOPO 1 CSSR NO. B1574
-LOCKER 2-PIECE METAL LOCKER LOCKER STEEL LOCKER WITH LOCK
-DRIP RANGE SUMP WITH GRATING 200 L FOR 2 X 200.
-ACTUATOR BELIMO N
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Ubicación: Land-sipa sf 12/8 linear pet blow-moulding machine with mould 8 cavities, complete with preform feeder, chiller and one new set of moulds for your bottle.
the machine will be completely overhauled.     SIPA SF 12/8 LINEAR PET BLOW-MOULDING MACHINE WITH MOULD 8 CAVITIES, COMPLETE WITH PREFORM FEEDER, CHILLER AND ONE NEW SET OF MOULDS FOR YOUR BOTTLE. THE MACHINE WILL BE COMPLETELY OVERHAULED.
Vendedor: SEPROTEQ
Año de construcción: usado
Precio: used machinery auction RESALE 19.750 €
Ubicación: Land-sagemis international after burning regenerative thermal oxidizer 25.000nm3/h, composed by combustion chamber with burner and no.2 energy dissipation sections recovery, smoke exhaust through ceramic bed, in-air temperature 70-120°c. contaminant: cot 300 mg/nm3; co 500 mg/nm3; dust <10 mg/nm3 -emission value: cot <10 mg/nm3; co <100 mg/nm3; dust <10 mg/nm3, nox <50 mg/nm3; so2 <50 mg/nm3; ipa <0.01 mg/nm3 - weight and size: w=2,5mt; width including burner's safety boardwalk 4,2mt; lenght 8,0mt; hight 6,0mt; total weight 39ton -details included as pdf. - location: dalmine (bg) SAGEMIS INTERNATIONAL AFTER BURNING REGENERATIVE THERMAL OXIDIZER 25.000NM3/H, COMPOSED BY COMBUSTION CHAMBER WITH BURNER AND NO.2 ENERGY DISSIPATION SECTIONS RECOVERY, SMOKE EXHAUST THROUGH CERAMIC BED, IN-AIR TEMPERATURE 70-120°C. CONTAMINANT: COT 300 MG/NM3; CO 500 MG/NM3; DUST <10 MG/NM3 -EMISSION VALUE: COT <10 MG/NM3; CO <100 MG/NM3; DUST <10 MG/NM3, NOX <50 MG/NM3; SO2 <50 MG/NM3; IPA <0.01 MG/NM3 - WEIGHT AND SIZE: W=2,5MT; WIDTH INCLUDING BURNER'S SAFETY BOARDWALK 4,2MT; LENGHT 8,0MT; HIGHT 6,0MT; TOTAL WEIGHT 39TON -DETAILS INCLUDED AS PDF. - LOCATION: DALMINE (BG)
Vendedor: Troostwijk Auctions
Año de construcción: usado
Ubicación: Land-working width 1640 mm
maximum size of 1620 x 1420 mm
60-500gm2 of role on arc cut
incl. ionizer for dissipating static charge of the paper, for example when cutting photo paper
space 2, 50 x 4, 00 m

as an accessory
hugo beck ws 140/120
angle welding  WORKING WIDTH 1640 MM MAXIMUM SIZE OF 1620 X 1420 MM 60-500GM2 OF ROLE ON ARC CUT INCL. IONIZER FOR DISSIPATING STATIC CHARGE OF THE PAPER, FOR EXAMPLE WHEN CUTTING PHOTO PAPER SPACE 2, 50 X 4, 00 M AS AN ACCESSORY HUGO BECK WS 140/120 ANGLE WELDING
Vendedor: UAB WEY masinos
Año de construcción: usado
Ubicación: Land-in production until 2016/17 preparing resin for sipa ecs 8/4 for the production of beer kegs of pet of 20 l (518 g) and 30 l (685 g).
resin drying throughput capability: 250 kg/hour, 
process airflow: 450 m³/hour
connected power: 24,9 kw
utilized for 20-l-keg = 187 kg/hour;
for 30-l-keg = 206 kg/hour.
	
complete with pump, silo (h1200 – 1200 cm³) and hopper feeder
   IN PRODUCTION UNTIL 2016/17 PREPARING RESIN FOR SIPA ECS 8/4 FOR THE PRODUCTION OF BEER KEGS OF PET OF 20 L (518 G) AND 30 L (685 G). RESIN DRYING THROUGHPUT CAPABILITY: 250 KG/HOUR, PROCESS AIRFLOW: 450 M³/HOUR CONNECTED POWER: 24,9 KW UTILIZED FOR 20-L-KEG = 187 KG/HOUR; FOR 30-L-KEG = 206 KG/HOUR. COMPLETE WITH PUMP, SILO (H1200 – 1200 CM³) AND HOPPER FEEDER
Vendedor: GloCon TST GmbH
Año de construcción: usado
Ubicación: Land-deburring and grinding machine costa, model: wsp css 1100
wet grinding machine, equipped with 1 sanding belt - and 2 stainless steel wire brush units, built in 1998:
technical data:
width. longitudinal sanding belts mm 1130
length 2620 mm longitudinal sanding belts
min. / max processing thickness mm 0.8-160
working height 900 mm

1 motor power 1 unit c 250 kw 10.5/14
cutting speed m/s 10/20
2. power unit s 250 kw 11
cutting speed m/s 18
3. power unit s 250 kw 11
cutting speed m/s 18

feed motor power kw 2,2
feed speed m/min 3-25
motor power kw 0,55 thickness setting
mist extractor fan 1.5 kw engine power
filter performance cosema kw 2,2
piece dryer motor power kw 3
minimum pressure d. pressure bar 6
air consumption nl/min 100 band control
compressed air consumption 100 nl/min
total installed power kw 46
machine weight, approx. 					kg 4200
voltage of auxiliary circuits voltage 24
power supply voltage 380/50/3
electrical regulations ip 54 iec
machine color ral 5010/9022

sharp-edged prominent surveys on the edges of machined blanks are removed by deburring. 

during the burning, and plasma cutting, punching and nibbling, but also with laser cutting ridge often remain after cutting on the cutting edge. depending on the quality of the cutting tools, ridge can be formed. sometimes, only the edge must be broken, to avoid the risk of injury.

this manufacturing process deburred and descaled, can be broken edges and that ground surface. it different grinding process (wet or dry sanding) with the appropriate tools (wire brushes or abrasive belts) be appointed depending on the schleifendem material (steel, stainless steel or aluminium). wet grinding is used due to the better heat dissipation due to the dust, but also due to the application of corrosion protection.

the boards are put this machine on a conveyor belt, that is magnetic in a particular area, to hold smaller sheet metal parts. after the choice is made, whether wet or dry ground, driving the board through the unit with a belt that can have different grain sizes. then by 2 units with oszylierenden steel brushes. after completion of the grinding process, the parts are dried and transported on rollers from the machine.

the speed of the conveyor belt, the grinding level, as well as the use of the individual units can be programmed.

DEBURRING AND GRINDING MACHINE COSTA, MODEL: WSP CSS 1100 WET GRINDING MACHINE, EQUIPPED WITH 1 SANDING BELT - AND 2 STAINLESS STEEL WIRE BRUSH UNITS, BUILT IN 1998: TECHNICAL DATA: WIDTH. LONGITUDINAL SANDING BELTS MM 1130 LENGTH 2620 MM LONGITUDINAL SANDING BELTS MIN. / MAX PROCESSING THICKNESS MM 0.8-160 WORKING HEIGHT 900 MM 1 MOTOR POWER 1 UNIT C 250 KW 10.5/14 CUTTING SPEED M/S 10/20 2. POWER UNIT S 250 KW 11 CUTTING SPEED M/S 18 3. POWER UNIT S 250 KW 11 CUTTING SPEED M/S 18 FEED MOTOR POWER KW 2,2 FEED SPEED M/MIN 3-25 MOTOR POWER KW 0,55 THICKNESS SETTING MIST EXTRACTOR FAN 1.5 KW ENGINE POWER FILTER PERFORMANCE COSEMA KW 2,2 PIECE DRYER MOTOR POWER KW 3 MINIMUM PRESSURE D. PRESSURE BAR 6 AIR CONSUMPTION NL/MIN 100 BAND CONTROL COMPRESSED AIR CONSUMPTION 100 NL/MIN TOTAL INSTALLED POWER KW 46 MACHINE WEIGHT, APPROX. KG 4200 VOLTAGE OF AUXILIARY CIRCUITS VOLTAGE 24 POWER SUPPLY VOLTAGE 380/50/3 ELECTRICAL REGULATIONS IP 54 IEC MACHINE COLOR RAL 5010/9022 SHARP-EDGED PROMINENT SURVEYS ON THE EDGES OF MACHINED BLANKS ARE REMOVED BY DEBURRING. DURING THE BURNING, AND PLASMA CUTTING, PUNCHING AND NIBBLING, BUT ALSO WITH LASER CUTTING RIDGE OFTEN REMAIN AFTER CUTTING ON THE CUTTING EDGE. DEPENDING ON THE QUALITY OF THE CUTTING TOOLS, RIDGE CAN BE FORMED. SOMETIMES, ONLY THE EDGE MUST BE BROKEN, TO AVOID THE RISK OF INJURY. THIS MANUFACTURING PROCESS DEBURRED AND DESCALED, CAN BE BROKEN EDGES AND THAT GROUND SURFACE. IT DIFFERENT GRINDING PROCESS (WET OR DRY SANDING) WITH THE APPROPRIATE TOOLS (WIRE BRUSHES OR ABRASIVE BELTS) BE APPOINTED DEPENDING ON THE SCHLEIFENDEM MATERIAL (STEEL, STAINLESS STEEL OR ALUMINIUM). WET GRINDING IS USED DUE TO THE BETTER HEAT DISSIPATION DUE TO THE DUST, BUT ALSO DUE TO THE APPLICATION OF CORROSION PROTECTION. THE BOARDS ARE PUT THIS MACHINE ON A CONVEYOR BELT, THAT IS MAGNETIC IN A PARTICULAR AREA, TO HOLD SMALLER SHEET METAL PARTS. AFTER THE CHOICE IS MADE, WHETHER WET OR DRY GROUND, DRIVING THE BOARD THROUGH THE UNIT WITH A BELT THAT CAN HAVE DIFFERENT GRAIN SIZES. THEN BY 2 UNITS WITH OSZYLIERENDEN STEEL BRUSHES. AFTER COMPLETION OF THE GRINDING PROCESS, THE PARTS ARE DRIED AND TRANSPORTED ON ROLLERS FROM THE MACHINE. THE SPEED OF THE CONVEYOR BELT, THE GRINDING LEVEL, AS WELL AS THE USE OF THE INDIVIDUAL UNITS CAN BE PROGRAMMED.
Vendedor: Kimmel GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-sipa linear blow molding 8 cavities capacity: 8,000 b / year 2001 operating hours ca 500     SIPA LINEAR BLOW MOLDING 8 CAVITIES CAPACITY: 8,000 B / YEAR 2001 OPERATING HOURS CA 500
Vendedor: B.M.G.e.K
Año de construcción: usado
Ubicación: Land-complete pet filling line for mineral water (still and carbonated) and softdrinks
capacity: 6,000 x 1, 5 l bottles / std.
bottle sizes: 1,5ltr. / 1,0ltr. / 0,5ltr. pet -bottles
plastic screw cap 28mm
labelling: around the bottle paper-lable by hot glue
packaging: 3 x 2 = 6 x 1,0 l shrinked into foil
3 x 2 = 1,5 l shrinked into foil
4 x 6 x 3 = 12 x 0,5 l shrinked into foil
line is already dismantled
consisting of:
1. siruproom
incl. sugar loosen-tank with suitable pumps
incl. storage-tank
incl. heat-exchanger
incl. filter
incl. syrup - and product-cooling-system
2. cip system consisting of:
2 tanks
incl. pump, piping and heat exchanger to heat the cleaning-medium
3. premix / carbonisation
manufacturer: melegari
type: mixjet 120
year of manufacturing: 2001
4. blowing machine
manufacturer: sipa
typ: sf 12/6
year of manufacturing: 2001
incl. high-pressure compressor
incl. chiller (cooling system)
incl. preform-feeding-system
5. air conveyor
manually adjustable
6. rinser / filler / capper - block (tribloc)
manufacturer: melegari
type: iso jet 35.35.7
year of manufacturing: 2001
with 35 rinsing stations, 35 filling valves and 6 head plastic screw capper
7. bottle conveyor system
from filler up to labeller
8. labelling machine
manufacturer: pe futura
type: 6t/540/1s-1e (hot glue)
year of manufacturing: 2001
9. bottle conveyor system
from labelling machine up to foil shrinking machine
10. foil shrinking machine
manufacturer: smi
year of manufacturing: 2013
11.paletizer
type: uni.mac.pa 100
year of manufacturing: 2001
   COMPLETE PET FILLING LINE FOR MINERAL WATER (STILL AND CARBONATED) AND SOFTDRINKS CAPACITY: 6,000 X 1, 5 L BOTTLES / STD. BOTTLE SIZES: 1,5LTR. / 1,0LTR. / 0,5LTR. PET -BOTTLES PLASTIC SCREW CAP 28MM LABELLING: AROUND THE BOTTLE PAPER-LABLE BY HOT GLUE PACKAGING: 3 X 2 = 6 X 1,0 L SHRINKED INTO FOIL 3 X 2 = 1,5 L SHRINKED INTO FOIL 4 X 6 X 3 = 12 X 0,5 L SHRINKED INTO FOIL LINE IS ALREADY DISMANTLED CONSISTING OF: 1. SIRUPROOM INCL. SUGAR LOOSEN-TANK WITH SUITABLE PUMPS INCL. STORAGE-TANK INCL. HEAT-EXCHANGER INCL. FILTER INCL. SYRUP - AND PRODUCT-COOLING-SYSTEM 2. CIP SYSTEM CONSISTING OF: 2 TANKS INCL. PUMP, PIPING AND HEAT EXCHANGER TO HEAT THE CLEANING-MEDIUM 3. PREMIX / CARBONISATION MANUFACTURER: MELEGARI TYPE: MIXJET 120 YEAR OF MANUFACTURING: 2001 4. BLOWING MACHINE MANUFACTURER: SIPA TYP: SF 12/6 YEAR OF MANUFACTURING: 2001 INCL. HIGH-PRESSURE COMPRESSOR INCL. CHILLER (COOLING SYSTEM) INCL. PREFORM-FEEDING-SYSTEM 5. AIR CONVEYOR MANUALLY ADJUSTABLE 6. RINSER / FILLER / CAPPER - BLOCK (TRIBLOC) MANUFACTURER: MELEGARI TYPE: ISO JET 35.35.7 YEAR OF MANUFACTURING: 2001 WITH 35 RINSING STATIONS, 35 FILLING VALVES AND 6 HEAD PLASTIC SCREW CAPPER 7. BOTTLE CONVEYOR SYSTEM FROM FILLER UP TO LABELLER 8. LABELLING MACHINE MANUFACTURER: PE FUTURA TYPE: 6T/540/1S-1E (HOT GLUE) YEAR OF MANUFACTURING: 2001 9. BOTTLE CONVEYOR SYSTEM FROM LABELLING MACHINE UP TO FOIL SHRINKING MACHINE 10. FOIL SHRINKING MACHINE MANUFACTURER: SMI YEAR OF MANUFACTURING: 2013 11.PALETIZER TYPE: UNI.MAC.PA 100 YEAR OF MANUFACTURING: 2001
Vendedor: Kahl & Schlichterle
Año de construcción: usado
Ubicación: Land-manufacturers including bosch, stanley, cleco, ingersoll rand, atlas copco (straight screwdrivers, pneumatic pneumatic ratchet ratchet tongs, impulse screwdriver automatic, ratchet wrenches, torque wrench angle screwdrivers, pneumatic screwdriver). blind rivet pliers, rivet tool, blind mother tong, bã¶llhoff, bollhoff, gesipa, oetiker, etc.

inquiries, levy also individually possible. MANUFACTURERS INCLUDING BOSCH, STANLEY, CLECO, INGERSOLL RAND, ATLAS COPCO (STRAIGHT SCREWDRIVERS, PNEUMATIC PNEUMATIC RATCHET RATCHET TONGS, IMPULSE SCREWDRIVER AUTOMATIC, RATCHET WRENCHES, TORQUE WRENCH ANGLE SCREWDRIVERS, PNEUMATIC SCREWDRIVER). BLIND RIVET PLIERS, RIVET TOOL, BLIND MOTHER TONG, B&ATILDE;&PARA;LLHOFF, BOLLHOFF, GESIPA, OETIKER, ETC. INQUIRIES, LEVY ALSO INDIVIDUALLY POSSIBLE.
Vendedor: Gebrauchttechnik Alexander Paulus
Año de construcción: usado
Ubicación: Land-complete factory for filling water and sof drinks in pet bottle. formats 1.5 l and 0.5l

blowing and filling area

-high pressure compressor neuman & esses, model 3v1-370 / 260/120, no. 000615, year 2000 42 bar series.

-blower sipa, model sf12 / 8 series no. 927, 2001. machine with 8 cavities. includes preforms hopper, preform elevator, inlet air conveyor, 2 coolers brand corena, model pc-ac35mees and molds

-full electric system with a board for loading and unloading bottles in silos make procomas, year 1993.

- 2 bottle storage silos procomac. included hopper and elevator bottles.

-bottle unscrambler procomac, model topstar 92001959, no. p3127 series, 1993. formats included.

-air conveyors make procomac, 1993. 21.5 linear meters and 3 curves 90.

- bottle conveyors ,chain 82 inches.3.15 linear meters and 1 curve 90º-

-rinser procomac, model gripstar 14 56110121, serial number p3024, year  1993. 53 valves rinsing. includes formats.

-monobloc  make procomac filling and capping model fillstar 60 10 113, no. p3025 series, 1993. 60 filling valves. capping tower make arol, model euro / pk, serial no. 6776, 2001. 10 capping heads. formats included.

-caps magazine bertolaso a900, serial no. 19906,197, year-1991

-labeller make-futura pe-825 futura, type 15tn, series a no. 718, year 1994 . hot melt labeler for wraparound precut label.

-bottle conveyors chain 82 inches, 2.95 meters and 1curve 90 °

-bottle conveyors . 19 meters to 1 curve 60º.

-shrink wrap machine make baumer, model t / r 60-40 universal, serial number 1946, year  1994. formats: 3x2 4x3 in 1.5 liter and 0.5 l.

-conveyor for packs 10.65 meters

- handle applicator make twin pack, mdel model, serial no. 62-93, 1993

- conveyor for packs make euro conveyor, serial no. 0149006, 1991. it consists of: 16.90 linear meters and 4 curves 90

-conveyors for packs make tecno team

-palletizer make berchi, spa-genius pt model, serial number 0054bf3890 / 01, year 2001. includes magazine for pallets and carton

-stretch wrapper machine make acmi-, model 121, serial number. c318 / 91-1991. includes pallet conveyor of 7.20 in length.

- pallets forwarding conveyor

- mixer procomac, model starmix batch 2500, serial numeber. p3027, 1993

- low pressure compressor, atlas copco brand, model ga-30. 7.5 bar. with dryer

-coder make imaje (new, in original packaging)

-heat exchanger make gea, model vt20, serial number. 170-842. pressure 6 bar.

- multistage pasteurizer alfa laval model p-15-pb, serial no.: 2231 -3553

-installation to mix beverages make abs composed by board,  2 tanks, 1 tubular.

 - gas bumer make ecoflam, model p300, year 1990, 6500 kl / h

tanks

- 2 tanks of 35,000 liters make azzini

- 2 tanks of 25,000 liters

- 2 tanks of 600 liters

-3 tanks azzini with agitator. capacity: 8000 liters

-1 tank azzini with agitator. capacity: 5000 liters



also available mechanical workshop equipment, electrical equipment, laboratory and office equipment. more information on request.   COMPLETE FACTORY FOR FILLING WATER AND SOF DRINKS IN PET BOTTLE. FORMATS 1.5 L AND 0.5L BLOWING AND FILLING AREA -HIGH PRESSURE COMPRESSOR NEUMAN & ESSES, MODEL 3V1-370 / 260/120, NO. 000615, YEAR 2000 42 BAR SERIES. -BLOWER SIPA, MODEL SF12 / 8 SERIES NO. 927, 2001. MACHINE WITH 8 CAVITIES. INCLUDES PREFORMS HOPPER, PREFORM ELEVATOR, INLET AIR CONVEYOR, 2 COOLERS BRAND CORENA, MODEL PC-AC35MEES AND MOLDS -FULL ELECTRIC SYSTEM WITH A BOARD FOR LOADING AND UNLOADING BOTTLES IN SILOS MAKE PROCOMAS, YEAR 1993. - 2 BOTTLE STORAGE SILOS PROCOMAC. INCLUDED HOPPER AND ELEVATOR BOTTLES. -BOTTLE UNSCRAMBLER PROCOMAC, MODEL TOPSTAR 92001959, NO. P3127 SERIES, 1993. FORMATS INCLUDED. -AIR CONVEYORS MAKE PROCOMAC, 1993. 21.5 LINEAR METERS AND 3 CURVES 90. - BOTTLE CONVEYORS ,CHAIN 82 INCHES.3.15 LINEAR METERS AND 1 CURVE 90º- -RINSER PROCOMAC, MODEL GRIPSTAR 14 56110121, SERIAL NUMBER P3024, YEAR 1993. 53 VALVES RINSING. INCLUDES FORMATS. -MONOBLOC MAKE PROCOMAC FILLING AND CAPPING MODEL FILLSTAR 60 10 113, NO. P3025 SERIES, 1993. 60 FILLING VALVES. CAPPING TOWER MAKE AROL, MODEL EURO / PK, SERIAL NO. 6776, 2001. 10 CAPPING HEADS. FORMATS INCLUDED. -CAPS MAGAZINE BERTOLASO A900, SERIAL NO. 19906,197, YEAR-1991 -LABELLER MAKE-FUTURA PE-825 FUTURA, TYPE 15TN, SERIES A NO. 718, YEAR 1994 . HOT MELT LABELER FOR WRAPAROUND PRECUT LABEL. -BOTTLE CONVEYORS CHAIN 82 INCHES, 2.95 METERS AND 1CURVE 90 ° -BOTTLE CONVEYORS . 19 METERS TO 1 CURVE 60º. -SHRINK WRAP MACHINE MAKE BAUMER, MODEL T / R 60-40 UNIVERSAL, SERIAL NUMBER 1946, YEAR 1994. FORMATS: 3X2 4X3 IN 1.5 LITER AND 0.5 L. -CONVEYOR FOR PACKS 10.65 METERS - HANDLE APPLICATOR MAKE TWIN PACK, MDEL MODEL, SERIAL NO. 62-93, 1993 - CONVEYOR FOR PACKS MAKE EURO CONVEYOR, SERIAL NO. 0149006, 1991. IT CONSISTS OF: 16.90 LINEAR METERS AND 4 CURVES 90 -CONVEYORS FOR PACKS MAKE TECNO TEAM -PALLETIZER MAKE BERCHI, SPA-GENIUS PT MODEL, SERIAL NUMBER 0054BF3890 / 01, YEAR 2001. INCLUDES MAGAZINE FOR PALLETS AND CARTON -STRETCH WRAPPER MACHINE MAKE ACMI-, MODEL 121, SERIAL NUMBER. C318 / 91-1991. INCLUDES PALLET CONVEYOR OF 7.20 IN LENGTH. - PALLETS FORWARDING CONVEYOR - MIXER PROCOMAC, MODEL STARMIX BATCH 2500, SERIAL NUMEBER. P3027, 1993 - LOW PRESSURE COMPRESSOR, ATLAS COPCO BRAND, MODEL GA-30. 7.5 BAR. WITH DRYER -CODER MAKE IMAJE (NEW, IN ORIGINAL PACKAGING) -HEAT EXCHANGER MAKE GEA, MODEL VT20, SERIAL NUMBER. 170-842. PRESSURE 6 BAR. - MULTISTAGE PASTEURIZER ALFA LAVAL MODEL P-15-PB, SERIAL NO.: 2231 -3553 -INSTALLATION TO MIX BEVERAGES MAKE ABS COMPOSED BY BOARD, 2 TANKS, 1 TUBULAR. - GAS BUMER MAKE ECOFLAM, MODEL P300, YEAR 1990, 6500 KL / H TANKS - 2 TANKS OF 35,000 LITERS MAKE AZZINI - 2 TANKS OF 25,000 LITERS - 2 TANKS OF 600 LITERS -3 TANKS AZZINI WITH AGITATOR. CAPACITY: 8000 LITERS -1 TANK AZZINI WITH AGITATOR. CAPACITY: 5000 LITERS ALSO AVAILABLE MECHANICAL WORKSHOP EQUIPMENT, ELECTRICAL EQUIPMENT, LABORATORY AND OFFICE EQUIPMENT. MORE INFORMATION ON REQUEST.
Vendedor: INTER-MAQUINAS AGUILAR S.L
Año de construcción: usado
Ubicación: Land-sipa sf8/3 linear reheat stretch blow moulding machine, year 2003 ? used for 5.0l pet bottle production. 

* machine refurbished in 2008 by sipa 
* soundproof and safety cabin 
* bottle discharge connection to the line on table-top conveyors 
* electrial cabinet with operator interface module 
* one set of blow moulds for 5.0l cylindrical bottles 

working hours : 45,746 hrs. (november 2014) 

machine is currently still working and in good condition.     SIPA SF8/3 LINEAR REHEAT STRETCH BLOW MOULDING MACHINE, YEAR 2003 ? USED FOR 5.0L PET BOTTLE PRODUCTION. * MACHINE REFURBISHED IN 2008 BY SIPA * SOUNDPROOF AND SAFETY CABIN * BOTTLE DISCHARGE CONNECTION TO THE LINE ON TABLE-TOP CONVEYORS * ELECTRIAL CABINET WITH OPERATOR INTERFACE MODULE * ONE SET OF BLOW MOULDS FOR 5.0L CYLINDRICAL BOTTLES WORKING HOURS : 45,746 HRS. (NOVEMBER 2014) MACHINE IS CURRENTLY STILL WORKING AND IN GOOD CONDITION.
Vendedor: IPR-PETMachinery
Año de construcción: usado
Ubicación: Land-
piece designation dimensions mm fushöhe mm

15 collar arm stand t boom 3970 x 3960 450
  15 collar arm stand t - boom 2360 x 3960 450
   3 collar arm stand l boom 2200 x 3960 450
  220 collar arms length 2000 mm

frame is in an einwndfreiem state. we hear from you and will remain PIECE DESIGNATION DIMENSIONS MM FUSH&OUML;HE MM 15 COLLAR ARM STAND T BOOM 3970 X 3960 450 15 COLLAR ARM STAND T - BOOM 2360 X 3960 450 3 COLLAR ARM STAND L BOOM 2200 X 3960 450 220 COLLAR ARMS LENGTH 2000 MM FRAME IS IN AN EINWNDFREIEM STATE. WE HEAR FROM YOU AND WILL REMAIN
Vendedor: DREYER-EXPORT
Año de construcción: usado
Ubicación: Land-frame press sipa

pneumatic
pressing size 4000  x 2200 mm
1 pressing beam left side with 1 cylinder from top
1 pressing beam variable with 1 cylinder from top
1 pressing beam variable with 2 cylinder from the right side 

weight: 900 kg

          FRAME PRESS SIPA PNEUMATIC PRESSING SIZE 4000 X 2200 MM 1 PRESSING BEAM LEFT SIDE WITH 1 CYLINDER FROM TOP 1 PRESSING BEAM VARIABLE WITH 1 CYLINDER FROM TOP 1 PRESSING BEAM VARIABLE WITH 2 CYLINDER FROM THE RIGHT SIDE WEIGHT: 900 KG
Vendedor: FWB-Maschinenhandel GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more SIPA types: