1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Precio: 900 €
Ubicación: Land-currently we have  20 x siemens sitrans p 7mf4533 sensors in stock. pressure messurement transmitter. price/unit if you by more then one part we will mak you an offer.  CURRENTLY WE HAVE 20 X SIEMENS SITRANS P 7MF4533 SENSORS IN STOCK. PRESSURE MESSUREMENT TRANSMITTER. PRICE/UNIT IF YOU BY MORE THEN ONE PART WE WILL MAK YOU AN OFFER.
Vendedor: EUROTECHNIK Dittrich GmbH
Año de construcción: usado
Ubicación: Land-continuous reactor in-line dispersing machine (1x), make kotthoff, type ms-3d, no 31859, new 1977, reconditioned in 2004 by fluko, material stainless steel, rotor sizes dia. 280x300mm, with jacket, with mechanical seal, motor 24,0 kw, 500 volt (ex), extra specifications - has not been used after reconditioning (new mechanical seal and bearings) in 2004continuous reactorsmixers > continuous reactors CONTINUOUS REACTOR IN-LINE DISPERSING MACHINE (1X), MAKE KOTTHOFF, TYPE MS-3D, NO 31859, NEW 1977, RECONDITIONED IN 2004 BY FLUKO, MATERIAL STAINLESS STEEL, ROTOR SIZES DIA. 280X300MM, WITH JACKET, WITH MECHANICAL SEAL, MOTOR 24,0 KW, 500 VOLT (EX), EXTRA SPECIFICATIONS - HAS NOT BEEN USED AFTER RECONDITIONING (NEW MECHANICAL SEAL AND BEARINGS) IN 2004CONTINUOUS REACTORSMIXERS > CONTINUOUS REACTORS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-force of pressure: 25 t
adjustable stroke: 5-80 mm
slide adjustable: 60 mm
plunger strokes p. min: 120
adjustable table: 150 mm
table transmission rate: 100 x 150 mm
security clearance: 160 mm
overtravel distance: 36
weight: 1750 kg

facilities/features:
two-hand operation
-emergency off pushbutton
-adjustable table FORCE OF PRESSURE: 25 T ADJUSTABLE STROKE: 5-80 MM SLIDE ADJUSTABLE: 60 MM PLUNGER STROKES P. MIN: 120 ADJUSTABLE TABLE: 150 MM TABLE TRANSMISSION RATE: 100 X 150 MM SECURITY CLEARANCE: 160 MM OVERTRAVEL DISTANCE: 36 WEIGHT: 1750 KG FACILITIES/FEATURES: TWO-HAND OPERATION -EMERGENCY OFF PUSHBUTTON -ADJUSTABLE TABLE
Vendedor: Weber Werkzeugmaschinen GbR
Año de construcción: usado
Ubicación: Land-spindle diameter: 150 mm<br/>x-travel: 10.000 mm<br/>y-travel: 6.000 mm<br/>z-travel: 1.500 mm<br/>w-axis: 700 mm<br/>v-axis: 2.000 mm<br/>control: 840 d sl  siemens<br/>main spindle::  <br/>turning speed range - main spindle: 5 - 3.000 min/-1<br/>transmission ratio: 2 <br/>transmission ratio 1: 5 - 600 min/-1<br/>transmission ratio 2: 601 - 3.000 min/-1<br/>power capacity - main spindel: 61 / 67 kw<br/>max. torque: 2.900 nm<br/>tool taper: sk 50 big+ <br/>spindle stroke: w: 700 mm<br/>feeds::  <br/>rapid traverse: 15 m/min<br/>feed speeds: 1 - 6.000 mm/min<br/>feed power: max. 25 kn<br/>work table::  <br/>surface area: 7.000 x 4.000 x 300 mm<br/>max. table load: 15.000 kg/m²<br/>t-slots: 16x 36h12 x 250mm  din 650<br/>rotating-table::  <br/>surface area: 3.000 x 2.970 mm<br/>type: dv 45 mm<br/>max. table load: 45.000 kg<br/>t-slots: 14x 28h9 x 200  din 650<br/>rotatable: b: 360 °<br/>total power requirement: 120 kva<br/>weight of the machine ca.: - t<br/>dimensions of the machine ca.: 22 x 16 x 10 m<br/>documents:  <br/>coolantsystem:  <br/>high pressure coolant: 20 bar <br/>through spindle coolant:  <br/>paper band filter:  <br/>milling-head: univ. v4 man. <br/>milling-head: vert. kf4/90 man. <br/>milling-head: vert. kf2/90 man. <br/>chip conveyor:  <br/>cnc - boring mill<br/>union chemnitz - pr 150<br/><br/>- ram-spindle<br/>- heavy-duty-machining<br/><br/>milling-heads:<br/>- v4: 2x 360° / 18kw / 3.000 min/1 / 1.405nm / man./man.<br/>- kf4/90: 360° / 30kw / 3.000 min/1 / 1.000nm / auto./man.<br/>- kf2/90: 360° / 15kw / 1.500 min/1 / 1.500nm / man./man.<br/><br/><br/><br/><br/> SPINDLE DIAMETER: 150 MM
X-TRAVEL: 10.000 MM
Y-TRAVEL: 6.000 MM
Z-TRAVEL: 1.500 MM
W-AXIS: 700 MM
V-AXIS: 2.000 MM
CONTROL: 840 D SL SIEMENS
MAIN SPINDLE::
TURNING SPEED RANGE - MAIN SPINDLE: 5 - 3.000 MIN/-1
TRANSMISSION RATIO: 2
TRANSMISSION RATIO 1: 5 - 600 MIN/-1
TRANSMISSION RATIO 2: 601 - 3.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 61 / 67 KW
MAX. TORQUE: 2.900 NM
TOOL TAPER: SK 50 BIG+
SPINDLE STROKE: W: 700 MM
FEEDS::
RAPID TRAVERSE: 15 M/MIN
FEED SPEEDS: 1 - 6.000 MM/MIN
FEED POWER: MAX. 25 KN
WORK TABLE::
SURFACE AREA: 7.000 X 4.000 X 300 MM
MAX. TABLE LOAD: 15.000 KG/M²
T-SLOTS: 16X 36H12 X 250MM DIN 650
ROTATING-TABLE::
SURFACE AREA: 3.000 X 2.970 MM
TYPE: DV 45 MM
MAX. TABLE LOAD: 45.000 KG
T-SLOTS: 14X 28H9 X 200 DIN 650
ROTATABLE: B: 360 °
TOTAL POWER REQUIREMENT: 120 KVA
WEIGHT OF THE MACHINE CA.: - T
DIMENSIONS OF THE MACHINE CA.: 22 X 16 X 10 M
DOCUMENTS:
COOLANTSYSTEM:
HIGH PRESSURE COOLANT: 20 BAR
THROUGH SPINDLE COOLANT:
PAPER BAND FILTER:
MILLING-HEAD: UNIV. V4 MAN.
MILLING-HEAD: VERT. KF4/90 MAN.
MILLING-HEAD: VERT. KF2/90 MAN.
CHIP CONVEYOR:
CNC - BORING MILL
UNION CHEMNITZ - PR 150

- RAM-SPINDLE
- HEAVY-DUTY-MACHINING

MILLING-HEADS:
- V4: 2X 360° / 18KW / 3.000 MIN/1 / 1.405NM / MAN./MAN.
- KF4/90: 360° / 30KW / 3.000 MIN/1 / 1.000NM / AUTO./MAN.
- KF2/90: 360° / 15KW / 1.500 MIN/1 / 1.500NM / MAN./MAN.




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-closed box, (1313/bat), first reg.: 20.07.2009, hu: 07/18, 110 kw, diesel, elapsed. km: 140.042, euronorm: 4, max. gg: 3,500 kg, colour: white, glued label,.
chassis.-no.: wdb9066331s398807, facilities: radio cd, 6-speed transmission, el. windows, trailer hitch, air conditioning, electr. tachograph, visible damage: rust infestation on the portal doors rear, driver's side door, sliding side door below, sill passenger's side, housing exterior mirrors driver and passenger side broken, battery defective CLOSED BOX, (1313/BAT), FIRST REG.: 20.07.2009, HU: 07/18, 110 KW, DIESEL, ELAPSED. KM: 140.042, EURONORM: 4, MAX. GG: 3,500 KG, COLOUR: WHITE, GLUED LABEL,. CHASSIS.-NO.: WDB9066331S398807, FACILITIES: RADIO CD, 6-SPEED TRANSMISSION, EL. WINDOWS, TRAILER HITCH, AIR CONDITIONING, ELECTR. TACHOGRAPH, VISIBLE DAMAGE: RUST INFESTATION ON THE PORTAL DOORS REAR, DRIVER'S SIDE DOOR, SLIDING SIDE DOOR BELOW, SILL PASSENGER'S SIDE, HOUSING EXTERIOR MIRRORS DRIVER AND PASSENGER SIDE BROKEN, BATTERY DEFECTIVE
Vendedor: Christoph Sattler
Año de construcción: usado
Ubicación: Land-spindle diameter: 162 mm<br/>x-travel: 12.000 mm<br/>y-travel: 6.000 mm<br/>z-travel: 1.500 mm<br/>w-axis: 700 mm<br/>v-axis: 3.000 mm<br/>control: 840 d sl  siemens<br/>main spindle::  <br/>turning speed range - main spindle: 5 - 2.800 min/-1<br/>transmission ratio: 2 <br/>power capacity - main spindel: 60 kw<br/>max. torque: 2.868 nm<br/>tool taper: sk 50 big+ <br/>spindle stroke: w: 700 mm<br/>feeds::  <br/>rapid traverse: 15 m/min<br/>feed speeds: 1 - 6.000 mm/min<br/>feed power: max. 25 kn<br/>tool-presetter::  <br/>number of toolpositions: 80 pos.<br/>tool taper: sk 50 big+ <br/>max. tool diameter: 125 / 250 mm<br/>max. tool length: 500 mm<br/>max. tool weight: 30 kg<br/>work table::  <br/>surface area: 1: 6.410 x 3.760 mm<br/>surface area: 2: 5.090 x 2.510 mm<br/>max. table load: 15.000 kg/m²<br/>t-slot - width: 36 mm<br/>t-slot - distance: 250 mm<br/>rotating-table::  <br/>surface area: 3.000 x 2.970 mm<br/>type: dv 60 mm<br/>max. table load: 60.000 kg<br/>t-slots: 14x 28h9 x 200 <br/>rotatable: b: 360 °<br/>total power requirement: 120 kva<br/>weight of the machine ca.: - t<br/>dimensions of the machine ca.: 25 x 17 x 10 m<br/>documents:  <br/>coolantsystem:  <br/>high pressure coolant: 50 bar <br/>through spindle coolant:  <br/>chip conveyor:  <br/>changing system: h/v <br/>pick-up station: autom. 5 pos. <br/>milling-unit: univ. v4 man. <br/>milling-unit: univ. kfu d5/45 <br/>facing-head: nc d´andrea ut5-800s <br/>spindle-extension: 1.200 mm <br/>cnc - boring mill<br/>union chemnitz - pcr 160<br/><br/>- starting-up in 2011<br/>- new spindle in 2016<br/>- ram-spindle<br/>- heavy-duty-machining<br/>- automatic head-changer<br/><br/>milling-heads:<br/>- v4: 2x 360° / 18kw / 1.405nm / 3.000 min/1 / man.<br/>- kfu d5/45: 2x 360°x 1° / 50kw / 1.700nm / 3.000 min/1 / autom.<br/>- ut 5-800s: 250 min/1 / u-axis 250mm<br/>- milling-head one-axis 360° / 15kw / 500nm / 1.500 min/1 / man.<br/>- spindle-extender 1.200mm<br/><br/><br/><br/><br/> SPINDLE DIAMETER: 162 MM
X-TRAVEL: 12.000 MM
Y-TRAVEL: 6.000 MM
Z-TRAVEL: 1.500 MM
W-AXIS: 700 MM
V-AXIS: 3.000 MM
CONTROL: 840 D SL SIEMENS
MAIN SPINDLE::
TURNING SPEED RANGE - MAIN SPINDLE: 5 - 2.800 MIN/-1
TRANSMISSION RATIO: 2
POWER CAPACITY - MAIN SPINDEL: 60 KW
MAX. TORQUE: 2.868 NM
TOOL TAPER: SK 50 BIG+
SPINDLE STROKE: W: 700 MM
FEEDS::
RAPID TRAVERSE: 15 M/MIN
FEED SPEEDS: 1 - 6.000 MM/MIN
FEED POWER: MAX. 25 KN
TOOL-PRESETTER::
NUMBER OF TOOLPOSITIONS: 80 POS.
TOOL TAPER: SK 50 BIG+
MAX. TOOL DIAMETER: 125 / 250 MM
MAX. TOOL LENGTH: 500 MM
MAX. TOOL WEIGHT: 30 KG
WORK TABLE::
SURFACE AREA: 1: 6.410 X 3.760 MM
SURFACE AREA: 2: 5.090 X 2.510 MM
MAX. TABLE LOAD: 15.000 KG/M²
T-SLOT - WIDTH: 36 MM
T-SLOT - DISTANCE: 250 MM
ROTATING-TABLE::
SURFACE AREA: 3.000 X 2.970 MM
TYPE: DV 60 MM
MAX. TABLE LOAD: 60.000 KG
T-SLOTS: 14X 28H9 X 200
ROTATABLE: B: 360 °
TOTAL POWER REQUIREMENT: 120 KVA
WEIGHT OF THE MACHINE CA.: - T
DIMENSIONS OF THE MACHINE CA.: 25 X 17 X 10 M
DOCUMENTS:
COOLANTSYSTEM:
HIGH PRESSURE COOLANT: 50 BAR
THROUGH SPINDLE COOLANT:
CHIP CONVEYOR:
CHANGING SYSTEM: H/V
PICK-UP STATION: AUTOM. 5 POS.
MILLING-UNIT: UNIV. V4 MAN.
MILLING-UNIT: UNIV. KFU D5/45
FACING-HEAD: NC D´ANDREA UT5-800S
SPINDLE-EXTENSION: 1.200 MM
CNC - BORING MILL
UNION CHEMNITZ - PCR 160

- STARTING-UP IN 2011
- NEW SPINDLE IN 2016
- RAM-SPINDLE
- HEAVY-DUTY-MACHINING
- AUTOMATIC HEAD-CHANGER

MILLING-HEADS:
- V4: 2X 360° / 18KW / 1.405NM / 3.000 MIN/1 / MAN.
- KFU D5/45: 2X 360°X 1° / 50KW / 1.700NM / 3.000 MIN/1 / AUTOM.
- UT 5-800S: 250 MIN/1 / U-AXIS 250MM
- MILLING-HEAD ONE-AXIS 360° / 15KW / 500NM / 1.500 MIN/1 / MAN.
- SPINDLE-EXTENDER 1.200MM




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land--closed version
-fully operational

-clamping surface: 900 x 500 mm
-traverse path x-axis: 650 mm
-travel y-axis: 450 mm
-traverse path z-axis: 250 mm
-z transmission rate: 350 mm
-supply voltage: 230 v
-dimensions wxhxd: 1160 x 1700 x 1110 mm
-weight: 280 kg -CLOSED VERSION -FULLY OPERATIONAL -CLAMPING SURFACE: 900 X 500 MM -TRAVERSE PATH X-AXIS: 650 MM -TRAVEL Y-AXIS: 450 MM -TRAVERSE PATH Z-AXIS: 250 MM -Z TRANSMISSION RATE: 350 MM -SUPPLY VOLTAGE: 230 V -DIMENSIONS WXHXD: 1160 X 1700 X 1110 MM -WEIGHT: 280 KG
Vendedor: ZIEGLER - Maschinen & Werkzeuge
Año de construcción: usado
Ubicación: Land-cap. 100 kg flour, 1 speed, timer\r\ninclude  2 removeable bowls\r\n CAP. 100 KG FLOUR, 1 SPEED, TIMER\R\NINCLUDE 2 REMOVEABLE BOWLS\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-the machine can be operated manually or with the cycle control.

spindle retainer: sk40
vertical spindle speed: 10-5000 rpm
horizontal spindle speed: 10-5000 rpm
levels of transmission: continuously variable
quill stroke: 80 mm
drilling & milling head tilt: +/-90â°
table: 800 x 400 mm
traverse path x-axis: 450 mm
stroke y axis: 350 mm
z axis travel: 400 mm
feed axes: x / y / z
feed speed: 10-5000 mm / min
t - slot width: 14 mm
motor power: 7 / 10 kw
voltage: 400 v
dimensions wxhxd: 2095 x 2060 x 2450 mm
weight: 2000 kg
facilities: emco easycycle control, coolant system THE MACHINE CAN BE OPERATED MANUALLY OR WITH THE CYCLE CONTROL. SPINDLE RETAINER: SK40 VERTICAL SPINDLE SPEED: 10-5000 RPM HORIZONTAL SPINDLE SPEED: 10-5000 RPM LEVELS OF TRANSMISSION: CONTINUOUSLY VARIABLE QUILL STROKE: 80 MM DRILLING & MILLING HEAD TILT: +/-90&ACIRC;&DEG; TABLE: 800 X 400 MM TRAVERSE PATH X-AXIS: 450 MM STROKE Y AXIS: 350 MM Z AXIS TRAVEL: 400 MM FEED AXES: X / Y / Z FEED SPEED: 10-5000 MM / MIN T - SLOT WIDTH: 14 MM MOTOR POWER: 7 / 10 KW VOLTAGE: 400 V DIMENSIONS WXHXD: 2095 X 2060 X 2450 MM WEIGHT: 2000 KG FACILITIES: EMCO EASYCYCLE CONTROL, COOLANT SYSTEM
Vendedor: ZIEGLER - Maschinen & Werkzeuge
Año de construcción: usado
Ubicación: Land-control heidenhain itnc 530
travel x / y / z 1050/530/630 mm
spindle speed 10000 1 / min
tool magazine for 30 tools sk40
internal coolant 20 bar
3d infrared touch probe
chip conveyor
  CONTROL HEIDENHAIN ITNC 530 TRAVEL X / Y / Z 1050/530/630 MM SPINDLE SPEED 10000 1 / MIN TOOL MAGAZINE FOR 30 TOOLS SK40 INTERNAL COOLANT 20 BAR 3D INFRARED TOUCH PROBE CHIP CONVEYOR
Vendedor: WMH24
Año de construcción: usado
Precio: 9.900 €
Ubicación: Land-; mileage [km]: 18911; gross weight [kg]: 16000; transmission: mechanisch; front tyre size: 11.00r20; rear tyre size: 11.00r20; colour: orange; wheelbase: 2750; cargo space dimensions [lxbxh]: xx ; MILEAGE [KM]: 18911; GROSS WEIGHT [KG]: 16000; TRANSMISSION: MECHANISCH; FRONT TYRE SIZE: 11.00R20; REAR TYRE SIZE: 11.00R20; COLOUR: ORANGE; WHEELBASE: 2750; CARGO SPACE DIMENSIONS [LXBXH]: XX
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-complete grinding system with task organs, mill, filter and conveyor systems
control cabinets
new electric motor
new transmission
all wear parts
all documentation
 COMPLETE GRINDING SYSTEM WITH TASK ORGANS, MILL, FILTER AND CONVEYOR SYSTEMS CONTROL CABINETS NEW ELECTRIC MOTOR NEW TRANSMISSION ALL WEAR PARTS ALL DOCUMENTATION
Vendedor: HTS GmbH
Año de construcción: usado
Precio: 4.900 €
Ubicación: Land-; gross weight [kg]: 32000; transmission: sonstige; front tyre size: 385 / 65 r 22,5; rear tyre size: 385 / 65 r 22,5; colour: rot; wheelbase: ; cargo space dimensions [lxbxh]: 6800x2340x1400; max payload [kg]: 26410 ; GROSS WEIGHT [KG]: 32000; TRANSMISSION: SONSTIGE; FRONT TYRE SIZE: 385 / 65 R 22,5; REAR TYRE SIZE: 385 / 65 R 22,5; COLOUR: ROT; WHEELBASE: ; CARGO SPACE DIMENSIONS [LXBXH]: 6800X2340X1400; MAX PAYLOAD [KG]: 26410
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-transversal table travel - x-axis: 900 mm of vertical spindle way - y axis: 1500 mm table travel longitudinally - z axis: 700 mm table surface: 900 x 1100 mmdie machine is in good technical condition, by prior agreement the possibility of testing. travel in axis z1 - 900 mm max. machining diameter 600 mm round table some speeds and some feeds do not work. transmission to the exchange. type according to type plate - af 85 spindle diameter â?? 850 mm spindle taper - morse 5 transmission - only vernier support post - yes-technical condition - go required  TRANSVERSAL TABLE TRAVEL - X-AXIS: 900 MM OF VERTICAL SPINDLE WAY - Y AXIS: 1500 MM TABLE TRAVEL LONGITUDINALLY - Z AXIS: 700 MM TABLE SURFACE: 900 X 1100 MMDIE MACHINE IS IN GOOD TECHNICAL CONDITION, BY PRIOR AGREEMENT THE POSSIBILITY OF TESTING. TRAVEL IN AXIS Z1 - 900 MM MAX. MACHINING DIAMETER 600 MM ROUND TABLE SOME SPEEDS AND SOME FEEDS DO NOT WORK. TRANSMISSION TO THE EXCHANGE. TYPE ACCORDING TO TYPE PLATE - AF 85 SPINDLE DIAMETER &ACIRC;?? 850 MM SPINDLE TAPER - MORSE 5 TRANSMISSION - ONLY VERNIER SUPPORT POST - YES-TECHNICAL CONDITION - GO REQUIRED
Vendedor: CEE-Machines
Año de construcción: usado
Precio: 69.000 €
Ubicación: Land-; mileage [km]: 106000; transmission: automatisch; front tyre size: ; rear tyre size: ; colour: blau; wheelbase: ; cargo space dimensions [lxbxh]: xx ; MILEAGE [KM]: 106000; TRANSMISSION: AUTOMATISCH; FRONT TYRE SIZE: ; REAR TYRE SIZE: ; COLOUR: BLAU; WHEELBASE: ; CARGO SPACE DIMENSIONS [LXBXH]: XX
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-last off code: dl-367dr registration: 25.04.2014 elapsed. hours of operation: 500,6 performance: 74, 9kw displacement: 4. 400ccm test badge: 4/2017 drive type: diesel maximum speed: motornr.: perkins 4-cylinder, turbo-diesel 4.4 l type, variant, version: t-l1/t1 003sp / - fin: 10stg00495 equity / total weight: 3.843/6.000kg 
facilities: 4 course, div. control panels, air conditioning, front and rear license launcher, additional lighting, tray plateau, div. storage compartments, front hydraulic lesnik prednja hidravlika shl 24, year 2014, powershiftgetriebe with load speed, power shuttle on the steering wheel is switchable, 32/32-speed transmission 3 dw rule hydraulic control units in the rear, joystick, rear pto with 540/750/1,000 rpm, ehr with external buttons, pin wave management, all wheel management with steering angle sensors, comfort seat, air conditioning, sunroof, 2 pcs. working lights front, 2 pcs. working light rear, 2-circuit compressed air brake system, mounting air, tow bar adjustable tires: rear galaxy 480/70 r34, front: galaxy 380/70 r24 documentation: licence of types of available key: 1 comments to the condition: expressly stated, that no complete inventory and check the functionality of the auction object performed. there is still the possibility that there are significant defects. to learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. the auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. please note also the general terms and conditions of auction. 
system number: LAST OFF CODE: DL-367DR REGISTRATION: 25.04.2014 ELAPSED. HOURS OF OPERATION: 500,6 PERFORMANCE: 74, 9KW DISPLACEMENT: 4. 400CCM TEST BADGE: 4/2017 DRIVE TYPE: DIESEL MAXIMUM SPEED: MOTORNR.: PERKINS 4-CYLINDER, TURBO-DIESEL 4.4 L TYPE, VARIANT, VERSION: T-L1/T1 003SP / - FIN: 10STG00495 EQUITY / TOTAL WEIGHT: 3.843/6.000KG FACILITIES: 4 COURSE, DIV. CONTROL PANELS, AIR CONDITIONING, FRONT AND REAR LICENSE LAUNCHER, ADDITIONAL LIGHTING, TRAY PLATEAU, DIV. STORAGE COMPARTMENTS, FRONT HYDRAULIC LESNIK PREDNJA HIDRAVLIKA SHL 24, YEAR 2014, POWERSHIFTGETRIEBE WITH LOAD SPEED, POWER SHUTTLE ON THE STEERING WHEEL IS SWITCHABLE, 32/32-SPEED TRANSMISSION 3 DW RULE HYDRAULIC CONTROL UNITS IN THE REAR, JOYSTICK, REAR PTO WITH 540/750/1,000 RPM, EHR WITH EXTERNAL BUTTONS, PIN WAVE MANAGEMENT, ALL WHEEL MANAGEMENT WITH STEERING ANGLE SENSORS, COMFORT SEAT, AIR CONDITIONING, SUNROOF, 2 PCS. WORKING LIGHTS FRONT, 2 PCS. WORKING LIGHT REAR, 2-CIRCUIT COMPRESSED AIR BRAKE SYSTEM, MOUNTING AIR, TOW BAR ADJUSTABLE TIRES: REAR GALAXY 480/70 R34, FRONT: GALAXY 380/70 R24 DOCUMENTATION: LICENCE OF TYPES OF AVAILABLE KEY: 1 COMMENTS TO THE CONDITION: EXPRESSLY STATED, THAT NO COMPLETE INVENTORY AND CHECK THE FUNCTIONALITY OF THE AUCTION OBJECT PERFORMED. THERE IS STILL THE POSSIBILITY THAT THERE ARE SIGNIFICANT DEFECTS. TO LEARN ABOUT THE CONDITION AND THE EFFICIENCY OF THE AUCTION OBJECT, THE POSSIBILITY OF THE VISIT AND THIS IS HIGHLY RECOMMENDED. THE AUCTIONEER ASSUMES NO RESPONSIBILITY FOR THE QUALITY, CONDITION, COMPLETENESS, ACCESSORIES, SPECIAL PROPERTIES, OPEN OR HIDDEN DEFECTS AND OTHER DAMAGES. PLEASE NOTE ALSO THE GENERAL TERMS AND CONDITIONS OF AUCTION. SYSTEM NUMBER:
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Precio: 59.900 €
Ubicación: Land-; mileage [km]: 48000; gross weight [kg]: 7490; transmission: mechanisch; front tyre size: 235/75 r 17,5; rear tyre size: 235/75 r 17,5; colour: orange; wheelbase: 3300; cargo space dimensions [lxbxh]: 4000xx; max payload [kg]: 2835 ; MILEAGE [KM]: 48000; GROSS WEIGHT [KG]: 7490; TRANSMISSION: MECHANISCH; FRONT TYRE SIZE: 235/75 R 17,5; REAR TYRE SIZE: 235/75 R 17,5; COLOUR: ORANGE; WHEELBASE: 3300; CARGO SPACE DIMENSIONS [LXBXH]: 4000XX; MAX PAYLOAD [KG]: 2835
Vendedor: Gassmann GmbH
Año de construcción: usado
Precio: 945 €
Ubicación: Land-mep

aluminium circular saw

type cobra 400

technical data:
 
type cobra 400

voltage 380 v

saw blade diameter 400 mm

transmission-2,2 kw

cutting capacity at 90 â°:

approximately 120 mm

square 110 mm

200 x 70 mm profile

incl. operating instructions

an invoice is created for you.

the vat id according to ⧠25a vat act does not apply.

MEP ALUMINIUM CIRCULAR SAW TYPE COBRA 400 TECHNICAL DATA: TYPE COBRA 400 VOLTAGE 380 V SAW BLADE DIAMETER 400 MM TRANSMISSION-2,2 KW CUTTING CAPACITY AT 90 &ACIRC;&DEG;: APPROXIMATELY 120 MM SQUARE 110 MM 200 X 70 MM PROFILE INCL. OPERATING INSTRUCTIONS AN INVOICE IS CREATED FOR YOU. THE VAT ID ACCORDING TO &ACIRC;&SECT; 25A VAT ACT DOES NOT APPLY.
Vendedor: Fa. Schönknecht
Año de construcción: usado
Precio: 4.900 €
Ubicación: Land-; transmission: sonstige; front tyre size: ; rear tyre size: ; colour: orange; wheelbase: ; cargo space dimensions [lxbxh]: 5200x2300x1300 ; TRANSMISSION: SONSTIGE; FRONT TYRE SIZE: ; REAR TYRE SIZE: ; COLOUR: ORANGE; WHEELBASE: ; CARGO SPACE DIMENSIONS [LXBXH]: 5200X2300X1300
Vendedor: Gassmann GmbH
Año de construcción: usado
Precio: 2.720 €
Ubicación: Land-%%%%%% attention – special offers now available !!! 
%%%%%% so prices are currently reduced by 15% !!!


horiz. threading machine
wagner wb – z 27

manufacturer: wagner
type: wb – z 27
mach.-nr.: 17834
year of construction: ??? / 10.2018 tüp.
comm.-nr.: 3999375/009
stock-nr.: 1905

+++ special price: old 3.200,- € | now 2.720,- € bn
+++ all prices are shown without taxes (net price)

 
technical data

cutting area: m6 – m 27 | r 1/8? – r 1? | w 1/4? – w 1?

10 spindle speeds: 68,5 – 168 u / min.
slide travel: 380 mm

 

drive power: 2,5 kw
weight: ca. 450 kg
standing area: w 1,40 x d 0,80 x h 1,10 m
color: green ral 6011

 
features

* thread-cutting head z 27, self-opening
* 2 sets of chaser die holders
* sets chaser dies
* cooling system
* splinter shoot

the rotational speeds of the spindle are changed by the transmission of the engine.

the cutting head is opened and closed by adjustable limit stops.


* if the year of construction has a “tüp.”-date, that means the machine has been electrically and technically inspected by us on that date.
* if the year of construction has a “tüb.”-date, that means the machine has been partially overhauled on that date according to the prior owner.
* if the year of construction is marked “*”, it is the information the prior owner relayed to us or our own estimation. %%%%%% ATTENTION – SPECIAL OFFERS NOW AVAILABLE !!! %%%%%% SO PRICES ARE CURRENTLY REDUCED BY 15% !!! HORIZ. THREADING MACHINE WAGNER WB – Z 27 MANUFACTURER: WAGNER TYPE: WB – Z 27 MACH.-NR.: 17834 YEAR OF CONSTRUCTION: ??? / 10.2018 TüP. COMM.-NR.: 3999375/009 STOCK-NR.: 1905 +++ SPECIAL PRICE: OLD 3.200,- € | NOW 2.720,- € BN +++ ALL PRICES ARE SHOWN WITHOUT TAXES (NET PRICE) TECHNICAL DATA CUTTING AREA: M6 – M 27 | R 1/8? – R 1? | W 1/4? – W 1? 10 SPINDLE SPEEDS: 68,5 – 168 U / MIN. SLIDE TRAVEL: 380 MM DRIVE POWER: 2,5 KW WEIGHT: CA. 450 KG STANDING AREA: W 1,40 X D 0,80 X H 1,10 M COLOR: GREEN RAL 6011 FEATURES * THREAD-CUTTING HEAD Z 27, SELF-OPENING * 2 SETS OF CHASER DIE HOLDERS * SETS CHASER DIES * COOLING SYSTEM * SPLINTER SHOOT THE ROTATIONAL SPEEDS OF THE SPINDLE ARE CHANGED BY THE TRANSMISSION OF THE ENGINE. THE CUTTING HEAD IS OPENED AND CLOSED BY ADJUSTABLE LIMIT STOPS. * IF THE YEAR OF CONSTRUCTION HAS A “TüP.”-DATE, THAT MEANS THE MACHINE HAS BEEN ELECTRICALLY AND TECHNICALLY INSPECTED BY US ON THAT DATE. * IF THE YEAR OF CONSTRUCTION HAS A “TüB.”-DATE, THAT MEANS THE MACHINE HAS BEEN PARTIALLY OVERHAULED ON THAT DATE ACCORDING TO THE PRIOR OWNER. * IF THE YEAR OF CONSTRUCTION IS MARKED “*”, IT IS THE INFORMATION THE PRIOR OWNER RELAYED TO US OR OUR OWN ESTIMATION.
Vendedor: ProHa Maschinen
Año de construcción: usado
Precio: 5.900 €
Ubicación: Land-; transmission: sonstige; front tyre size: ; rear tyre size: ; colour: ; wheelbase: ; cargo space dimensions [lxbxh]: xx ; TRANSMISSION: SONSTIGE; FRONT TYRE SIZE: ; REAR TYRE SIZE: ; COLOUR: ; WHEELBASE: ; CARGO SPACE DIMENSIONS [LXBXH]: XX
Vendedor: Gassmann GmbH
Año de construcción: usado
Precio: 33.000 €
Ubicación: Land-technical data

category
front stacker
vehicle number
2-2018-8-1997-ka12000d-p availability
in 1 day after order
hours.
14.842 hours
fuel type
diesel
gear
automatic
year of build
1997
overall height
3,770 mm
load-bearing capacity
12,000 kg
lifting height
5,000 mm
facilities

cabin
protection roof
power steering
rental possible
vehicle description

vehicle data: make: kalmar
site 33378 rheda-wiedenbrã¼ck
type: dcd 12-1200
load centre 1200 mm
drive type: diesel
load capacity: 12000 kg
lifting height: 5000 mm
year of construction: 1997
hours of operation: 14842
engine: volvo
transmission: dana

mast data:
mast type: duplex with side shift + fork positioner up to 3100 mm
lifting height: 5000 mm
load centre 1200 mm
height: 3770 mm
fork carrier width: 3500 mm
forks: 2350 mm x 300 mm x 70 mm

dimensions
length: 4000 mm
width: 3500 mm
height: 3770 mm
weight: 21080 kg
front tires: 2 x 12.00-20 / air / rear: 2 x 12.00-20 / air /.

description & special equipment: optional: full cab, heating, 3rd valve, 4 valve, working light rear, working lights front, mirror, feurerlã¶scher, first-aid kit. the forklift is generalã¼beholt and comes with a new uvv geliefertunser offers you a selection from our stock of another 100 used forklift trucks and warehouse equipment.  all equipment offered by us are available immediately and can be seen in our stores in rheda-wiedenbrã¼ck and kolberg. in addition we will create an individual offer of financing for a hassle free purchase of our fork-lift trucks, aerial platforms and attachments you. unless you purchase a vehicle from us, we buy your used too freely to or exhibiting him with us for sale commission.  

our owner mrs barbara andruszko is like at any time by phone 0176-32718960 for a detailed consultation available. 

abdulla gmbh was founded in 1991 in rheda-wiedenbrã¼ck and is represented in 2002 under the name of nitomi lpg also on the polish market.  our agents specialize in overhaul of forklift trucks. TECHNICAL DATA CATEGORY FRONT STACKER VEHICLE NUMBER 2-2018-8-1997-KA12000D-P AVAILABILITY IN 1 DAY AFTER ORDER HOURS. 14.842 HOURS FUEL TYPE DIESEL GEAR AUTOMATIC YEAR OF BUILD 1997 OVERALL HEIGHT 3,770 MM LOAD-BEARING CAPACITY 12,000 KG LIFTING HEIGHT 5,000 MM FACILITIES CABIN PROTECTION ROOF POWER STEERING RENTAL POSSIBLE VEHICLE DESCRIPTION VEHICLE DATA: MAKE: KALMAR SITE 33378 RHEDA-WIEDENBR&ATILDE;&FRAC14;CK TYPE: DCD 12-1200 LOAD CENTRE 1200 MM DRIVE TYPE: DIESEL LOAD CAPACITY: 12000 KG LIFTING HEIGHT: 5000 MM YEAR OF CONSTRUCTION: 1997 HOURS OF OPERATION: 14842 ENGINE: VOLVO TRANSMISSION: DANA MAST DATA: MAST TYPE: DUPLEX WITH SIDE SHIFT + FORK POSITIONER UP TO 3100 MM LIFTING HEIGHT: 5000 MM LOAD CENTRE 1200 MM HEIGHT: 3770 MM FORK CARRIER WIDTH: 3500 MM FORKS: 2350 MM X 300 MM X 70 MM DIMENSIONS LENGTH: 4000 MM WIDTH: 3500 MM HEIGHT: 3770 MM WEIGHT: 21080 KG FRONT TIRES: 2 X 12.00-20 / AIR / REAR: 2 X 12.00-20 / AIR /. DESCRIPTION & SPECIAL EQUIPMENT: OPTIONAL: FULL CAB, HEATING, 3RD VALVE, 4 VALVE, WORKING LIGHT REAR, WORKING LIGHTS FRONT, MIRROR, FEURERL&ATILDE;&PARA;SCHER, FIRST-AID KIT. THE FORKLIFT IS GENERAL&ATILDE;&FRAC14;BEHOLT AND COMES WITH A NEW UVV GELIEFERTUNSER OFFERS YOU A SELECTION FROM OUR STOCK OF ANOTHER 100 USED FORKLIFT TRUCKS AND WAREHOUSE EQUIPMENT. ALL EQUIPMENT OFFERED BY US ARE AVAILABLE IMMEDIATELY AND CAN BE SEEN IN OUR STORES IN RHEDA-WIEDENBR&ATILDE;&FRAC14;CK AND KOLBERG. IN ADDITION WE WILL CREATE AN INDIVIDUAL OFFER OF FINANCING FOR A HASSLE FREE PURCHASE OF OUR FORK-LIFT TRUCKS, AERIAL PLATFORMS AND ATTACHMENTS YOU. UNLESS YOU PURCHASE A VEHICLE FROM US, WE BUY YOUR USED TOO FREELY TO OR EXHIBITING HIM WITH US FOR SALE COMMISSION. OUR OWNER MRS BARBARA ANDRUSZKO IS LIKE AT ANY TIME BY PHONE 0176-32718960 FOR A DETAILED CONSULTATION AVAILABLE. ABDULLA GMBH WAS FOUNDED IN 1991 IN RHEDA-WIEDENBR&ATILDE;&FRAC14;CK AND IS REPRESENTED IN 2002 UNDER THE NAME OF NITOMI LPG ALSO ON THE POLISH MARKET. OUR AGENTS SPECIALIZE IN OVERHAUL OF FORKLIFT TRUCKS.
Vendedor: Andruszko GmbH
Año de construcción: usado
Precio: 800 €
Ubicación: Land-; gross weight [kg]: 15000; transmission: sonstige; front tyre size: ; rear tyre size: ; colour: gelb; wheelbase: ; cargo space dimensions [lxbxh]: 7000x2430x2250 ; GROSS WEIGHT [KG]: 15000; TRANSMISSION: SONSTIGE; FRONT TYRE SIZE: ; REAR TYRE SIZE: ; COLOUR: GELB; WHEELBASE: ; CARGO SPACE DIMENSIONS [LXBXH]: 7000X2430X2250
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-gsp transmission drilling machine with multiple spindle head GSP TRANSMISSION DRILLING MACHINE WITH MULTIPLE SPINDLE HEAD
Vendedor: Ralph Rosenthal Maschinenlager
Año de construcción: usado
Precio: 28.900 €
Ubicación: Land-; gross weight [kg]: 54000; transmission: sonstige; front tyre size: 295/60r22,5; rear tyre size: 295/60r22,5; colour: ; wheelbase: ; cargo space dimensions [lxbxh]: 8900x2550x1002; max payload [kg]: 43620 ; GROSS WEIGHT [KG]: 54000; TRANSMISSION: SONSTIGE; FRONT TYRE SIZE: 295/60R22,5; REAR TYRE SIZE: 295/60R22,5; COLOUR: ; WHEELBASE: ; CARGO SPACE DIMENSIONS [LXBXH]: 8900X2550X1002; MAX PAYLOAD [KG]: 43620
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-year 1981/2010

band width 750-2,000 mm
band thickness 1.50 - 6.00 mm
coil weight of up to 30 tons
coilinnen - ã? 508-760 mm
coilauã?en - ã? 1,000-2,000 mm sheet length of 7,000 mm
section length of max. 15,000 mm
speed v = 45 m / min.
length tolerance 2.00 mm
working direction left - right system consisting of:
federal truck travels (underfloor)
double - decoiler
ver driveability hydraulic
driver setup - unit with attached to bending chisel
and pressure roller with mounting frame to bend chisel / hydraulic roller
band-width 2.225 mm
number - driver role 2
driver roll - 㸠245 mm
number - straightening rolls 4
leveling rollers - 㸠190 mm
total width - roll 2.200 mm
drive unit make ckr, model rdk 200 m, performance 29.4 kw / n = 1,400
rossi - transmission, model rci 160 p01n, power 28 kw / i = 15.5
control over - roller i and ii tilt
control over - roller iii indicative machine
number - set roller 15
setting rollers - 㸠approx. 70 mm
total length - set roller 2.200 mm
band-width 2.210 mm
number - supports 14 (7 x up / 7 x below)
number - supporting role (x up / 63 x below)
support rollers - 㸠ca. 130 mm
electromotive height adjustment
hydraulic tilt adjustment
total support - adjustment hydraulic
control over - roller table
transverse scissors of part of
drive unit make bbc, model gn 280
performance = 290 kw / n 1.500
band-width 2,220 mm
acceleration band
spout roll - frame number - outlet roller (rubberized) 2
outlet roll - 㸠180 mm
pile - lifting roller / right / left lower unit spindle stack pressure leak - roller hydraulic
electrics
number - cabinets 1
number - control panels 1 YEAR 1981/2010 BAND WIDTH 750-2,000 MM BAND THICKNESS 1.50 - 6.00 MM COIL WEIGHT OF UP TO 30 TONS COILINNEN - &ATILDE;? 508-760 MM COILAU&ATILDE;?EN - &ATILDE;? 1,000-2,000 MM SHEET LENGTH OF 7,000 MM SECTION LENGTH OF MAX. 15,000 MM SPEED V = 45 M / MIN. LENGTH TOLERANCE 2.00 MM WORKING DIRECTION LEFT - RIGHT SYSTEM CONSISTING OF: FEDERAL TRUCK TRAVELS (UNDERFLOOR) DOUBLE - DECOILER VER DRIVEABILITY HYDRAULIC DRIVER SETUP - UNIT WITH ATTACHED TO BENDING CHISEL AND PRESSURE ROLLER WITH MOUNTING FRAME TO BEND CHISEL / HYDRAULIC ROLLER BAND-WIDTH 2.225 MM NUMBER - DRIVER ROLE 2 DRIVER ROLL - &ATILDE;&CEDIL; 245 MM NUMBER - STRAIGHTENING ROLLS 4 LEVELING ROLLERS - &ATILDE;&CEDIL; 190 MM TOTAL WIDTH - ROLL 2.200 MM DRIVE UNIT MAKE CKR, MODEL RDK 200 M, PERFORMANCE 29.4 KW / N = 1,400 ROSSI - TRANSMISSION, MODEL RCI 160 P01N, POWER 28 KW / I = 15.5 CONTROL OVER - ROLLER I AND II TILT CONTROL OVER - ROLLER III INDICATIVE MACHINE NUMBER - SET ROLLER 15 SETTING ROLLERS - &ATILDE;&CEDIL; APPROX. 70 MM TOTAL LENGTH - SET ROLLER 2.200 MM BAND-WIDTH 2.210 MM NUMBER - SUPPORTS 14 (7 X UP / 7 X BELOW) NUMBER - SUPPORTING ROLE (X UP / 63 X BELOW) SUPPORT ROLLERS - &ATILDE;&CEDIL; CA. 130 MM ELECTROMOTIVE HEIGHT ADJUSTMENT HYDRAULIC TILT ADJUSTMENT TOTAL SUPPORT - ADJUSTMENT HYDRAULIC CONTROL OVER - ROLLER TABLE TRANSVERSE SCISSORS OF PART OF DRIVE UNIT MAKE BBC, MODEL GN 280 PERFORMANCE = 290 KW / N 1.500 BAND-WIDTH 2,220 MM ACCELERATION BAND SPOUT ROLL - FRAME NUMBER - OUTLET ROLLER (RUBBERIZED) 2 OUTLET ROLL - &ATILDE;&CEDIL; 180 MM PILE - LIFTING ROLLER / RIGHT / LEFT LOWER UNIT SPINDLE STACK PRESSURE LEAK - ROLLER HYDRAULIC ELECTRICS NUMBER - CABINETS 1 NUMBER - CONTROL PANELS 1
Vendedor: Reinhold Schmitt GmbH
Año de construcción: usado
Precio: 4.300 €
Ubicación: Land-; gross weight [kg]: 16000; transmission: sonstige; front tyre size: 12r22.5; rear tyre size: 12r22.5; colour: ; wheelbase: ; cargo space dimensions [lxbxh]: xx; max payload [kg]: 12600 ; GROSS WEIGHT [KG]: 16000; TRANSMISSION: SONSTIGE; FRONT TYRE SIZE: 12R22.5; REAR TYRE SIZE: 12R22.5; COLOUR: ; WHEELBASE: ; CARGO SPACE DIMENSIONS [LXBXH]: XX; MAX PAYLOAD [KG]: 12600
Vendedor: Gassmann GmbH
Año de construcción: usado
Precio: 475 €
Ubicación: Land-for boxes etc, pick rack, waste sorting shelf, provide shelf, used with 2 storage levels for pallets, jungheinrich, approx. 62 fields - - flow rack:
 
price per box: only â?¬750 (net), dismantled and loaded!
 
price for the entire post: â?¬29.500.-(net) = â?¬475.-/ box!
 
2 include flow racks per box (1 x 1, 50 m and 1 m x 2 m wide - deep) 4, and 4 pallet shelf beams (approximately 3, 60 m wide = 8 pallets)
 
manufacturer: jungheinrich
type: flow racks
year of construction: 2000
frame height of pallet rack frame must be submitted (should be about 4.20-4, 40 m)
depth of frame: 4m
height of the front frame (on the side of the pick): approx. 2 m
depth of the inclined plate: approx. 40 cm
 
 
type: 1
flow rack: 2,000 x 4.005 mm (wxd)
number of levels: 5 per box
number of channels per flow rack: 4
number of rolls bars per channel: 3
permissible load per rack: 500 kg
 
type: 2
flow rack: 1,500 x 4.005 mm (wxd)
number of levels: 5 per box
number of channels per flow rack: 3
number of rolls bars per channel: 3
permissible load per rack: 375 kg
 
condition: good FOR BOXES ETC, PICK RACK, WASTE SORTING SHELF, PROVIDE SHELF, USED WITH 2 STORAGE LEVELS FOR PALLETS, JUNGHEINRICH, APPROX. 62 FIELDS - - FLOW RACK: PRICE PER BOX: ONLY &ACIRC;?&NOT;750 (NET), DISMANTLED AND LOADED! PRICE FOR THE ENTIRE POST: &ACIRC;?&NOT;29.500.-(NET) = &ACIRC;?&NOT;475.-/ BOX! 2 INCLUDE FLOW RACKS PER BOX (1 X 1, 50 M AND 1 M X 2 M WIDE - DEEP) 4, AND 4 PALLET SHELF BEAMS (APPROXIMATELY 3, 60 M WIDE = 8 PALLETS) MANUFACTURER: JUNGHEINRICH TYPE: FLOW RACKS YEAR OF CONSTRUCTION: 2000 FRAME HEIGHT OF PALLET RACK FRAME MUST BE SUBMITTED (SHOULD BE ABOUT 4.20-4, 40 M) DEPTH OF FRAME: 4M HEIGHT OF THE FRONT FRAME (ON THE SIDE OF THE PICK): APPROX. 2 M DEPTH OF THE INCLINED PLATE: APPROX. 40 CM TYPE: 1 FLOW RACK: 2,000 X 4.005 MM (WXD) NUMBER OF LEVELS: 5 PER BOX NUMBER OF CHANNELS PER FLOW RACK: 4 NUMBER OF ROLLS BARS PER CHANNEL: 3 PERMISSIBLE LOAD PER RACK: 500 KG TYPE: 2 FLOW RACK: 1,500 X 4.005 MM (WXD) NUMBER OF LEVELS: 5 PER BOX NUMBER OF CHANNELS PER FLOW RACK: 3 NUMBER OF ROLLS BARS PER CHANNEL: 3 PERMISSIBLE LOAD PER RACK: 375 KG CONDITION: GOOD
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Precio: 4.900 €
Ubicación: Land-; gross weight [kg]: 18000; transmission: sonstige; front tyre size: 275/70r22.5; rear tyre size: 275/70r22.5; colour: rot; wheelbase: ; cargo space dimensions [lxbxh]: 6000x2350x1; max payload [kg]: 14600 ; GROSS WEIGHT [KG]: 18000; TRANSMISSION: SONSTIGE; FRONT TYRE SIZE: 275/70R22.5; REAR TYRE SIZE: 275/70R22.5; COLOUR: ROT; WHEELBASE: ; CARGO SPACE DIMENSIONS [LXBXH]: 6000X2350X1; MAX PAYLOAD [KG]: 14600
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-1.   2000ton x14m roll press

make:hug  smith(england)

model: glasgow 

cap' : 2,000ton 

(t)44.5mm x 14,300mm

roiis

top roii : ?469.9mm

bottom roii :?391.16mm

max.roii opening:459.74mm

bottom roiis centers distance :436.88-792.48mm

max.stroke of top beam:838.2mm

swival of top beam:max.304.8mm

speed

approach : 76.2mm/ sec

return : 38.1mm/sec

roiiing : 91.4mm/sec

weight of machine : 370ton

controller

power

driving motor : 7.5kw x 2

hyd 'motor : 35w x 2

roii conveyor

2,000 x 3,000 x 6ea

bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567


 1. 2000TON X14M ROLL PRESS MAKE:HUG SMITH(ENGLAND) MODEL: GLASGOW CAP' : 2,000TON (T)44.5MM X 14,300MM ROIIS TOP ROII : ?469.9MM BOTTOM ROII :?391.16MM MAX.ROII OPENING:459.74MM BOTTOM ROIIS CENTERS DISTANCE :436.88-792.48MM MAX.STROKE OF TOP BEAM:838.2MM SWIVAL OF TOP BEAM:MAX.304.8MM SPEED APPROACH : 76.2MM/ SEC RETURN : 38.1MM/SEC ROIIING : 91.4MM/SEC WEIGHT OF MACHINE : 370TON CONTROLLER POWER DRIVING MOTOR : 7.5KW X 2 HYD 'MOTOR : 35W X 2 ROII CONVEYOR 2,000 X 3,000 X 6EA BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 4.200 €
Ubicación: Land-; gross weight [kg]: 16000; transmission: sonstige; front tyre size: 365 / 80 r 20; rear tyre size: 365 / 80 r 20; colour: rot; wheelbase: ; cargo space dimensions [lxbxh]: xx; max payload [kg]: 10550 ; GROSS WEIGHT [KG]: 16000; TRANSMISSION: SONSTIGE; FRONT TYRE SIZE: 365 / 80 R 20; REAR TYRE SIZE: 365 / 80 R 20; COLOUR: ROT; WHEELBASE: ; CARGO SPACE DIMENSIONS [LXBXH]: XX; MAX PAYLOAD [KG]: 10550
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-press scheef 10 amp

year of construction: 1961
pressure capacity: 10000 kg
throat depth: 160mm
plunger strokes: 120 min
adjustable tappet: 40mm
hub vertstellbar: 0-60mm
power: 1 hp
pannung: 220/380v
height: 170cm width: 75cm depth: 80cm
table size: 40cmx28cm
transmission rate: 200mm
the machine runs very quietly.

good condition fully functional can be visited on site and tried out.
shipping abroad.

visit:

basically i would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. please ask questions before you purchase to avoid ambiguity.
for general questions or an appointment for a visit i am at the below telephone number, available.
 
errors in the description and intermediate sale is reserved.

the vat is shown separately on my bills.

shipping with freight forwarding.
  PRESS SCHEEF 10 AMP YEAR OF CONSTRUCTION: 1961 PRESSURE CAPACITY: 10000 KG THROAT DEPTH: 160MM PLUNGER STROKES: 120 MIN ADJUSTABLE TAPPET: 40MM HUB VERTSTELLBAR: 0-60MM POWER: 1 HP PANNUNG: 220/380V HEIGHT: 170CM WIDTH: 75CM DEPTH: 80CM TABLE SIZE: 40CMX28CM TRANSMISSION RATE: 200MM THE MACHINE RUNS VERY QUIETLY. GOOD CONDITION FULLY FUNCTIONAL CAN BE VISITED ON SITE AND TRIED OUT. SHIPPING ABROAD. VISIT: BASICALLY I WOULD LIKE TO POINT OUT THAT THE ARTICLE MAY BE VIEWED AND TESTED UNDER POWER TO EXCLUDE MISUNDERSTANDINGS, LIKE BEFORE YOU BUY. PLEASE ASK QUESTIONS BEFORE YOU PURCHASE TO AVOID AMBIGUITY. FOR GENERAL QUESTIONS OR AN APPOINTMENT FOR A VISIT I AM AT THE BELOW TELEPHONE NUMBER, AVAILABLE. ERRORS IN THE DESCRIPTION AND INTERMEDIATE SALE IS RESERVED. THE VAT IS SHOWN SEPARATELY ON MY BILLS. SHIPPING WITH FREIGHT FORWARDING.
Vendedor: Erwin Knoll Import & Export
Año de construcción: usado
Precio: 119.000 €
Ubicación: Land-; mileage [km]: 109217; transmission: mechanisch; front tyre size: 225/60 r15; rear tyre size: 225/60 r15; colour: silber; wheelbase: ; cargo space dimensions [lxbxh]: xx ; MILEAGE [KM]: 109217; TRANSMISSION: MECHANISCH; FRONT TYRE SIZE: 225/60 R15; REAR TYRE SIZE: 225/60 R15; COLOUR: SILBER; WHEELBASE: ; CARGO SPACE DIMENSIONS [LXBXH]: XX
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-complete bottling line for disposable pet bottles 
0,33 - 0,5 - 1,0 - 1,5 liters
suitable for bottling of mineral water and fruit drinks, both still and sparkling (carbonated).

scope of supply:

pet filler khs drv-pet (vf) 45
-incl. filler enhancement hot filling- 

capper alcoa 4109/360-2001
-agitator for sports cap-

filling level control syscona unicept fhk rf

rinser khs fr-zr 45

labeller khs/anker roland hs 5

carrier handle applicator twin pack mdel

traypacker smi lsk 45 t

shrink tunnel smi st

sealing machine hüttinger tig 2.5/300 

conveyor vm logistics

label applicator weber 5100

bottle twister trans tech hysek

bottle press strautmann 

nitrogen dosing feeder terboven

  COMPLETE BOTTLING LINE FOR DISPOSABLE PET BOTTLES 0,33 - 0,5 - 1,0 - 1,5 LITERS SUITABLE FOR BOTTLING OF MINERAL WATER AND FRUIT DRINKS, BOTH STILL AND SPARKLING (CARBONATED). SCOPE OF SUPPLY: PET FILLER KHS DRV-PET (VF) 45 -INCL. FILLER ENHANCEMENT HOT FILLING- CAPPER ALCOA 4109/360-2001 -AGITATOR FOR SPORTS CAP- FILLING LEVEL CONTROL SYSCONA UNICEPT FHK RF RINSER KHS FR-ZR 45 LABELLER KHS/ANKER ROLAND HS 5 CARRIER HANDLE APPLICATOR TWIN PACK MDEL TRAYPACKER SMI LSK 45 T SHRINK TUNNEL SMI ST SEALING MACHINE HüTTINGER TIG 2.5/300 CONVEYOR VM LOGISTICS LABEL APPLICATOR WEBER 5100 BOTTLE TWISTER TRANS TECH HYSEK BOTTLE PRESS STRAUTMANN NITROGEN DOSING FEEDER TERBOVEN
Vendedor: Ohrter Getränkemaschinen Handel
Año de construcción: usado
Precio: 7.900 €
Ubicación: Land-; mileage [km]: 1; transmission: sonstige; front tyre size: ; rear tyre size: ; colour: rot; wheelbase: ; cargo space dimensions [lxbxh]: xx ; MILEAGE [KM]: 1; TRANSMISSION: SONSTIGE; FRONT TYRE SIZE: ; REAR TYRE SIZE: ; COLOUR: ROT; WHEELBASE: ; CARGO SPACE DIMENSIONS [LXBXH]: XX
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-qty. 1 second-hand cut to size saw
maker:		smid		type:	fsi-543		built:	5/1991
product dimension (al)
thickness:  max 150 mm	width:	max 3000 mm		cutting length:	max 3100 mm
cutting blade (circular)
diameter:	max 650 mm	bore:	80 mm		revolution: 	2310 rpm
sawing motor:		18.5 kw – 3000 rpm
 QTY. 1 SECOND-HAND CUT TO SIZE SAW MAKER: SMID TYPE: FSI-543 BUILT: 5/1991 PRODUCT DIMENSION (AL) THICKNESS: MAX 150 MM WIDTH: MAX 3000 MM CUTTING LENGTH: MAX 3100 MM CUTTING BLADE (CIRCULAR) DIAMETER: MAX 650 MM BORE: 80 MM REVOLUTION: 2310 RPM SAWING MOTOR: 18.5 KW – 3000 RPM
Vendedor: MET-TECH GMBH
Año de construcción: usado
Precio: 9.900 €
Ubicación: Land-; transmission: sonstige; front tyre size: ; rear tyre size: ; colour: grau; wheelbase: ; cargo space dimensions [lxbxh]: 4800x2340x850 ; TRANSMISSION: SONSTIGE; FRONT TYRE SIZE: ; REAR TYRE SIZE: ; COLOUR: GRAU; WHEELBASE: ; CARGO SPACE DIMENSIONS [LXBXH]: 4800X2340X850
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-traverse path x, y, z: 1600 x 815 x 700 mmdrehscheibe: 1700 x 815 mmhersteller: heidenhein tnc530.
description:
the machine is in good technical condition, the possibility of testing, by prior arrangement. t-groove shape... 18 x 5 mm work table height... 850 mm spindle: spindle taper....... iso n50, din 69871 spindle speed... 40-4000 u / min head forehead from the table... 200-900 mm speed: x / y / z rapid... 10/10/10 m / min working feed......... 1-8000 mm / min atc: number of tools... 32 (hand tank) max tool diameter....... 125 mm tool length... 400 mm tool weight... 15 kg spare tools... 3.5 seconds cutting - cutting... 10 sec. ballscrews...... 㸠50 mm accuracy... c 3 0.008 (torque 649/659 nm) dimensions of the machine: dx å¡... 4800 x 3400 mm height... 300 mm weight......... 16,000 kg full chip embodiment ce fã¶rdervorder - covered with, back - in head all gears of a screw spindle transmission build cooling through TRAVERSE PATH X, Y, Z: 1600 X 815 X 700 MMDREHSCHEIBE: 1700 X 815 MMHERSTELLER: HEIDENHEIN TNC530. DESCRIPTION: THE MACHINE IS IN GOOD TECHNICAL CONDITION, THE POSSIBILITY OF TESTING, BY PRIOR ARRANGEMENT. T-GROOVE SHAPE... 18 X 5 MM WORK TABLE HEIGHT... 850 MM SPINDLE: SPINDLE TAPER....... ISO N50, DIN 69871 SPINDLE SPEED... 40-4000 U / MIN HEAD FOREHEAD FROM THE TABLE... 200-900 MM SPEED: X / Y / Z RAPID... 10/10/10 M / MIN WORKING FEED......... 1-8000 MM / MIN ATC: NUMBER OF TOOLS... 32 (HAND TANK) MAX TOOL DIAMETER....... 125 MM TOOL LENGTH... 400 MM TOOL WEIGHT... 15 KG SPARE TOOLS... 3.5 SECONDS CUTTING - CUTTING... 10 SEC. BALLSCREWS...... &ATILDE;&CEDIL; 50 MM ACCURACY... C 3 0.008 (TORQUE 649/659 NM) DIMENSIONS OF THE MACHINE: DX &ARING;&IEXCL;... 4800 X 3400 MM HEIGHT... 300 MM WEIGHT......... 16,000 KG FULL CHIP EMBODIMENT CE F&ATILDE;&PARA;RDERVORDER - COVERED WITH, BACK - IN HEAD ALL GEARS OF A SCREW SPINDLE TRANSMISSION BUILD COOLING THROUGH
Vendedor: CEE-Machines
Año de construcción: usado
Precio: 26.900 €
Ubicación: Land-; gross weight [kg]: 36000; transmission: sonstige; front tyre size: 385 / 65 r 22,5; rear tyre size: 385 / 65 r 22,5; colour: grau; wheelbase: ; cargo space dimensions [lxbxh]: 7300x2354x1460; max payload [kg]: 29663 ; GROSS WEIGHT [KG]: 36000; TRANSMISSION: SONSTIGE; FRONT TYRE SIZE: 385 / 65 R 22,5; REAR TYRE SIZE: 385 / 65 R 22,5; COLOUR: GRAU; WHEELBASE: ; CARGO SPACE DIMENSIONS [LXBXH]: 7300X2354X1460; MAX PAYLOAD [KG]: 29663
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-technical data:

-load capacity at horizontal position of the table 1000 kg
-load capacity at vertical position of the table 500 kg
-faceplate dimensions 610 x 610 mm
-motorized faceplate. continuously tiltable 0-135 â°
-table height in horizontal position approx.		  	  710 mm
-rotation electr. infinitely variable 0.03-1.3 u/min
-welding current transmission 500 a
-drive 400 v - right - left rotation
-footswitch - ground cable
	-space requirement approx.      	         b h 1200 x 710 x 1450 mm
-weight approx.					  500 kg	
 TECHNICAL DATA: -LOAD CAPACITY AT HORIZONTAL POSITION OF THE TABLE 1000 KG -LOAD CAPACITY AT VERTICAL POSITION OF THE TABLE 500 KG -FACEPLATE DIMENSIONS 610 X 610 MM -MOTORIZED FACEPLATE. CONTINUOUSLY TILTABLE 0-135 &ACIRC;&DEG; -TABLE HEIGHT IN HORIZONTAL POSITION APPROX. 710 MM -ROTATION ELECTR. INFINITELY VARIABLE 0.03-1.3 U/MIN -WELDING CURRENT TRANSMISSION 500 A -DRIVE 400 V - RIGHT - LEFT ROTATION -FOOTSWITCH - GROUND CABLE -SPACE REQUIREMENT APPROX. B H 1200 X 710 X 1450 MM -WEIGHT APPROX. 500 KG
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: 9.900 €
Ubicación: Land-; transmission: sonstige; front tyre size: ; rear tyre size: ; colour: weiß; wheelbase: ; cargo space dimensions [lxbxh]: 4900x2300x1500 ; TRANSMISSION: SONSTIGE; FRONT TYRE SIZE: ; REAR TYRE SIZE: ; COLOUR: WEIß; WHEELBASE: ; CARGO SPACE DIMENSIONS [LXBXH]: 4900X2300X1500
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-canning line for beer 
capacity: 30.000 can per hour for 0,5 liter can
build: 2005
make: khs
        
de-palletizer - ash - 1t. - equipment           
 
can filler - dvd 40   
  
ferrrum seamer - f506g          
  
pasteurizer - innopas pisg.          

can - filtec ft-3xr.          
  
palletizer - pbl 1 n 1.          
  
package conveyor 
          
empty can conveyor       
    
smi packer cm300           

 
  CANNING LINE FOR BEER CAPACITY: 30.000 CAN PER HOUR FOR 0,5 LITER CAN BUILD: 2005 MAKE: KHS DE-PALLETIZER - ASH - 1T. - EQUIPMENT CAN FILLER - DVD 40 FERRRUM SEAMER - F506G PASTEURIZER - INNOPAS PISG. CAN - FILTEC FT-3XR. PALLETIZER - PBL 1 N 1. PACKAGE CONVEYOR EMPTY CAN CONVEYOR SMI PACKER CM300
Vendedor: Mazuba GmbH
Año de construcción: usado
Precio: 26.900 €
Ubicación: Land-; gross weight [kg]: 36000; transmission: sonstige; front tyre size: 385 / 65 r 22,5; rear tyre size: 385 / 65 r 22,5; colour: grau; wheelbase: ; cargo space dimensions [lxbxh]: 7300x2354x1460; max payload [kg]: 29663 ; GROSS WEIGHT [KG]: 36000; TRANSMISSION: SONSTIGE; FRONT TYRE SIZE: 385 / 65 R 22,5; REAR TYRE SIZE: 385 / 65 R 22,5; COLOUR: GRAU; WHEELBASE: ; CARGO SPACE DIMENSIONS [LXBXH]: 7300X2354X1460; MAX PAYLOAD [KG]: 29663
Vendedor: Gassmann GmbH
Año de construcción: usado
Precio: 3.392 €
Ubicación: Land-%%%%%% attention – special offers now available !!! 
%%%%%% so prices are currently reduced by 15% !!!


horiz. threading machine
wagner wb – z 27

manufacturer: wagner
type: wb – z 27
mach.-nr.: 18790
year of construction: ??? / 10.2018 tüp.
comm.-nr.: 3999375/009
stock-nr.: 1904

+++ special price: old 3.990,- € | now 3.391,50 € bn
+++ all prices are shown without taxes (net price)

 
technical data

cutting area: m6 – m 27 | r 1/8? – r 1? | w 1/4? – w 1?

10 spindle speeds: 68,5 – 168 u / min.
slide travel: 380 mm

 

drive power: 2,5 kw
weight: ca. 450 kg
standing area: w 1,40 x d 0,80 x h 1,10 m
color: green ral 6011

 
features

* thread-cutting head wagner z 27, self-opening
* 3 sets of chaser die holders
* various chasers
* chaser holder fastening ring for z 27
* cooling system
* splinter shoot
* operating manual for wagner head z 27

the rotational speeds of the spindle are changed by the transmission of the engine.

the cutting head is opened and closed by adjustable limit stops.


* if the year of construction has a “tüp.”-date, that means the machine has been electrically and technically inspected by us on that date.
* if the year of construction has a “tüb.”-date, that means the machine has been partially overhauled on that date according to the prior owner.
* if the year of construction is marked “*”, it is the information the prior owner relayed to us or our own estimation.   %%%%%% ATTENTION – SPECIAL OFFERS NOW AVAILABLE !!! %%%%%% SO PRICES ARE CURRENTLY REDUCED BY 15% !!! HORIZ. THREADING MACHINE WAGNER WB – Z 27 MANUFACTURER: WAGNER TYPE: WB – Z 27 MACH.-NR.: 18790 YEAR OF CONSTRUCTION: ??? / 10.2018 TüP. COMM.-NR.: 3999375/009 STOCK-NR.: 1904 +++ SPECIAL PRICE: OLD 3.990,- € | NOW 3.391,50 € BN +++ ALL PRICES ARE SHOWN WITHOUT TAXES (NET PRICE) TECHNICAL DATA CUTTING AREA: M6 – M 27 | R 1/8? – R 1? | W 1/4? – W 1? 10 SPINDLE SPEEDS: 68,5 – 168 U / MIN. SLIDE TRAVEL: 380 MM DRIVE POWER: 2,5 KW WEIGHT: CA. 450 KG STANDING AREA: W 1,40 X D 0,80 X H 1,10 M COLOR: GREEN RAL 6011 FEATURES * THREAD-CUTTING HEAD WAGNER Z 27, SELF-OPENING * 3 SETS OF CHASER DIE HOLDERS * VARIOUS CHASERS * CHASER HOLDER FASTENING RING FOR Z 27 * COOLING SYSTEM * SPLINTER SHOOT * OPERATING MANUAL FOR WAGNER HEAD Z 27 THE ROTATIONAL SPEEDS OF THE SPINDLE ARE CHANGED BY THE TRANSMISSION OF THE ENGINE. THE CUTTING HEAD IS OPENED AND CLOSED BY ADJUSTABLE LIMIT STOPS. * IF THE YEAR OF CONSTRUCTION HAS A “TüP.”-DATE, THAT MEANS THE MACHINE HAS BEEN ELECTRICALLY AND TECHNICALLY INSPECTED BY US ON THAT DATE. * IF THE YEAR OF CONSTRUCTION HAS A “TüB.”-DATE, THAT MEANS THE MACHINE HAS BEEN PARTIALLY OVERHAULED ON THAT DATE ACCORDING TO THE PRIOR OWNER. * IF THE YEAR OF CONSTRUCTION IS MARKED “*”, IT IS THE INFORMATION THE PRIOR OWNER RELAYED TO US OR OUR OWN ESTIMATION.
Vendedor: ProHa Maschinen
Año de construcción: usado
Precio: 13.900 €
Ubicación: Land-; gross weight [kg]: 18000; transmission: sonstige; front tyre size: 385 / 65 r 22,5; rear tyre size: 385 / 65 r 22,5; colour: blau; wheelbase: ; cargo space dimensions [lxbxh]: 6000x2420x1600; max payload [kg]: 13300 ; GROSS WEIGHT [KG]: 18000; TRANSMISSION: SONSTIGE; FRONT TYRE SIZE: 385 / 65 R 22,5; REAR TYRE SIZE: 385 / 65 R 22,5; COLOUR: BLAU; WHEELBASE: ; CARGO SPACE DIMENSIONS [LXBXH]: 6000X2420X1600; MAX PAYLOAD [KG]: 13300
Vendedor: Gassmann GmbH
Año de construcción: usado
Precio: 3.392 €
Ubicación: Land-%%%%%% attention – special offers now available !!! 
%%%%%% so prices are currently reduced by 15% !!!


horiz. threading machine
wagner wb – z 27

manufacturer: wagner
type: wb – z 27
mach.-nr.: 18274
year of construction: ??? / 10.2018 tüp.
comm.-nr.: 3999375/009
stock-nr.: 1903

+++ special price: old 3.990,- € | now 3.391,50 € bn
+++ all prices are shown without taxes (net price)

 
technical data

cutting area: m6 – m 27 | r 1/8? – r 1? | w 1/4? – w 1?

10 spindle speeds: 68,5 – 168 u / min.
slide travel: 380 mm

 

drive power: 2,5 kw
weight: ca. 450 kg
standing area: w 1,40 x d 0,80 x h 1,10 m
color: green ral 6011

 
features

* thread-cutting head wagner z 27, self-opening
* 3 sets of chaser die holders
* various chasers
* chaser holder fastening ring for z 27
* cooling system
* splinter shoot
* operating manual for wagner head z 27

the rotational speeds of the spindle are changed by the transmission of the engine.

the cutting head is opened and closed by adjustable limit stops.


* if the year of construction has a “tüp.”-date, that means the machine has been electrically and technically inspected by us on that date.
* if the year of construction has a “tüb.”-date, that means the machine has been partially overhauled on that date according to the prior owner.
* if the year of construction is marked “*”, it is the information the prior owner relayed to us or our own estimation.   %%%%%% ATTENTION – SPECIAL OFFERS NOW AVAILABLE !!! %%%%%% SO PRICES ARE CURRENTLY REDUCED BY 15% !!! HORIZ. THREADING MACHINE WAGNER WB – Z 27 MANUFACTURER: WAGNER TYPE: WB – Z 27 MACH.-NR.: 18274 YEAR OF CONSTRUCTION: ??? / 10.2018 TüP. COMM.-NR.: 3999375/009 STOCK-NR.: 1903 +++ SPECIAL PRICE: OLD 3.990,- € | NOW 3.391,50 € BN +++ ALL PRICES ARE SHOWN WITHOUT TAXES (NET PRICE) TECHNICAL DATA CUTTING AREA: M6 – M 27 | R 1/8? – R 1? | W 1/4? – W 1? 10 SPINDLE SPEEDS: 68,5 – 168 U / MIN. SLIDE TRAVEL: 380 MM DRIVE POWER: 2,5 KW WEIGHT: CA. 450 KG STANDING AREA: W 1,40 X D 0,80 X H 1,10 M COLOR: GREEN RAL 6011 FEATURES * THREAD-CUTTING HEAD WAGNER Z 27, SELF-OPENING * 3 SETS OF CHASER DIE HOLDERS * VARIOUS CHASERS * CHASER HOLDER FASTENING RING FOR Z 27 * COOLING SYSTEM * SPLINTER SHOOT * OPERATING MANUAL FOR WAGNER HEAD Z 27 THE ROTATIONAL SPEEDS OF THE SPINDLE ARE CHANGED BY THE TRANSMISSION OF THE ENGINE. THE CUTTING HEAD IS OPENED AND CLOSED BY ADJUSTABLE LIMIT STOPS. * IF THE YEAR OF CONSTRUCTION HAS A “TüP.”-DATE, THAT MEANS THE MACHINE HAS BEEN ELECTRICALLY AND TECHNICALLY INSPECTED BY US ON THAT DATE. * IF THE YEAR OF CONSTRUCTION HAS A “TüB.”-DATE, THAT MEANS THE MACHINE HAS BEEN PARTIALLY OVERHAULED ON THAT DATE ACCORDING TO THE PRIOR OWNER. * IF THE YEAR OF CONSTRUCTION IS MARKED “*”, IT IS THE INFORMATION THE PRIOR OWNER RELAYED TO US OR OUR OWN ESTIMATION.
Vendedor: ProHa Maschinen
Año de construcción: usado
Precio: 69.900 €
Ubicación: Land-; gross weight [kg]: 26000; transmission: mechanisch; front tyre size: 13r22,5; rear tyre size: 13r22,5; colour: weiß; wheelbase: 3600; cargo space dimensions [lxbxh]: xx ; GROSS WEIGHT [KG]: 26000; TRANSMISSION: MECHANISCH; FRONT TYRE SIZE: 13R22,5; REAR TYRE SIZE: 13R22,5; COLOUR: WEIß; WHEELBASE: 3600; CARGO SPACE DIMENSIONS [LXBXH]: XX
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-can capacity:
 34.000 cans per hour for 0,15 slim can
 34.000 cans per hour for 0,25 slim can
 34.000 cans per hour for 0,25 standard can
 25.000 cans per hour for 0,33 sleek and standard can
 25.000 cans per hour for 0,355 sleek can 
 20.000 cans per hour for 0,5 standard can

 packaging: tray with or without foil: 12 pack and 24 pack

 shrink pack: 4 and 6 packs in tray of 12 pack or 24 pack

 
 1. can depalletizer 
 made: sima 
 year: 2003 
 
 2. can rinser
 four channels

 3. can filler
 made: khs
 year: 2008 
 40 valves

 combination valve for can lid 200 and 202

 4. seamer
 made: sima 
 year: 2003
 6 head seamer for can lid 200 to 202 


 5. fill height control
 made: heuft 

 6. tunnel pasteurizer
 made: fmt italy
 year: 2003
 with cooling tower 

 7. can blowing system
 
 8. date coder
 
 9. tray-shrink-packer / multipacker
 made: ocme
 year: 2012
 
 10. labeller for trays
 
 11. tray-shrink-packer
 made: smi italy
 year: 2003
 
 12. palletizer
 made: sima
 year: 2003

 13. pallet wrapper:
 made: sima
 year: 2003

 14. syrup tanks 4 pieces with agitator 
 1 water tank

 15. shugar dissolving tank and shugar silo

 16. mixer
 
 17. water treatment
 
 18. cip-unit
 
 19. steam boiler 
 
 20. can conveyors

 21. air compressor
  
   CAN CAPACITY: 34.000 CANS PER HOUR FOR 0,15 SLIM CAN 34.000 CANS PER HOUR FOR 0,25 SLIM CAN 34.000 CANS PER HOUR FOR 0,25 STANDARD CAN 25.000 CANS PER HOUR FOR 0,33 SLEEK AND STANDARD CAN 25.000 CANS PER HOUR FOR 0,355 SLEEK CAN 20.000 CANS PER HOUR FOR 0,5 STANDARD CAN PACKAGING: TRAY WITH OR WITHOUT FOIL: 12 PACK AND 24 PACK SHRINK PACK: 4 AND 6 PACKS IN TRAY OF 12 PACK OR 24 PACK 1. CAN DEPALLETIZER MADE: SIMA YEAR: 2003 2. CAN RINSER FOUR CHANNELS 3. CAN FILLER MADE: KHS YEAR: 2008 40 VALVES COMBINATION VALVE FOR CAN LID 200 AND 202 4. SEAMER MADE: SIMA YEAR: 2003 6 HEAD SEAMER FOR CAN LID 200 TO 202 5. FILL HEIGHT CONTROL MADE: HEUFT 6. TUNNEL PASTEURIZER MADE: FMT ITALY YEAR: 2003 WITH COOLING TOWER 7. CAN BLOWING SYSTEM 8. DATE CODER 9. TRAY-SHRINK-PACKER / MULTIPACKER MADE: OCME YEAR: 2012 10. LABELLER FOR TRAYS 11. TRAY-SHRINK-PACKER MADE: SMI ITALY YEAR: 2003 12. PALLETIZER MADE: SIMA YEAR: 2003 13. PALLET WRAPPER: MADE: SIMA YEAR: 2003 14. SYRUP TANKS 4 PIECES WITH AGITATOR 1 WATER TANK 15. SHUGAR DISSOLVING TANK AND SHUGAR SILO 16. MIXER 17. WATER TREATMENT 18. CIP-UNIT 19. STEAM BOILER 20. CAN CONVEYORS 21. AIR COMPRESSOR
Vendedor: Ebert Technologie GmbH
Año de construcción: usado
Precio: 219.000 €
Ubicación: Land-; mileage [km]: 54700; transmission: mechanisch; front tyre size: ; rear tyre size: ; colour: blau; wheelbase: ; cargo space dimensions [lxbxh]: xx ; MILEAGE [KM]: 54700; TRANSMISSION: MECHANISCH; FRONT TYRE SIZE: ; REAR TYRE SIZE: ; COLOUR: BLAU; WHEELBASE: ; CARGO SPACE DIMENSIONS [LXBXH]: XX
Vendedor: Gassmann GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more SMI types: