709 ofertas

Año de construcción: usado
Ubicación: Land-stock number: 140244 built: 2008 control: fanuc 18i-tb turning length without access to maximum: 210 mm rod diameter: 32 mm maximum spindle speed: 8000 rpm rotary tools-solid: 5 turning tools driven fan: 4 dimensions without chip conveyor (l x w x h): 2200 x 1350 x 1670 
total weight approx.: 3500 kg feeder fmb turbo 3-36, losma oil mist extraction. 
 
 STOCK NUMBER: 140244 BUILT: 2008 CONTROL: FANUC 18I-TB TURNING LENGTH WITHOUT ACCESS TO MAXIMUM: 210 MM ROD DIAMETER: 32 MM MAXIMUM SPINDLE SPEED: 8000 RPM ROTARY TOOLS-SOLID: 5 TURNING TOOLS DRIVEN FAN: 4 DIMENSIONS WITHOUT CHIP CONVEYOR (L X W X H): 2200 X 1350 X 1670 TOTAL WEIGHT APPROX.: 3500 KG FEEDER FMB TURBO 3-36, LOSMA OIL MIST EXTRACTION.
Vendedor: Bach Machines
Año de construcción: usado
Precio: used machinery auction RESALE 100 €
Ubicación: Land-weight approx.: 20 kg<br/>dimensions (l x w x h) approx.: 600 x 300 x 300 mm<br/>description: sp4 standard parallign seam clamp was developed to quickly clamp and align solid surface materials in near perfect alignment<br> connecting two powerful venturi vacuum pods with precision linear bearings accomplish this<br> perfectly clamped seams with a minimum amount of time and effort<br> operates with shop air or a small portable air compressor, runs at 90psi<br> aligns surfaces as well as clamps seams<br> for further information see photos<br> WEIGHT APPROX.: 20 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 300 X 300 MM
DESCRIPTION: SP4 STANDARD PARALLIGN SEAM CLAMP WAS DEVELOPED TO QUICKLY CLAMP AND ALIGN SOLID SURFACE MATERIALS IN NEAR PERFECT ALIGNMENT
CONNECTING TWO POWERFUL VENTURI VACUUM PODS WITH PRECISION LINEAR BEARINGS ACCOMPLISH THIS
PERFECTLY CLAMPED SEAMS WITH A MINIMUM AMOUNT OF TIME AND EFFORT
OPERATES WITH SHOP AIR OR A SMALL PORTABLE AIR COMPRESSOR, RUNS AT 90PSI
ALIGNS SURFACES AS WELL AS CLAMPS SEAMS
FOR FURTHER INFORMATION SEE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 14.900 €
Ubicación: Land-profile milling and profile grinding machine brandt - arminius, specifically for stair construction

thank you, that you are interested in our offers. if you have specific questions, please use the telephone, personal interview questions can clarify faster than by mail.

a video of the current machine can be sent on request.

ideal machine for stair builders and solid wood processor
5 units:
1 edge grinding unit with 120 mm band, pneumatic belt tension and electro-pneumatic controlled sanding shoe
2 milling units 1, 5kw to radius milling, swiveling
2 units of profile grinding with belt and electro-pneumatic controlled sanding shoe

secure workpiece clamping chain plates and upper pressure roller
workpiece thickness up to approx. 60 mm
adjustable feed speed
easy pull-out workpiece support
machine is currently equipped with milling cutters r8

operating instructions
ce mark
after painted in places
great machine with outstanding sanding results, hardly rework required. ideal for the efficient production of stairs or table tops.

dimensions approx. 4000 x 1300 x 1900mm (lxwxh). weight approx. 1200kg. 

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". PROFILE MILLING AND PROFILE GRINDING MACHINE BRANDT - ARMINIUS, SPECIFICALLY FOR STAIR CONSTRUCTION THANK YOU, THAT YOU ARE INTERESTED IN OUR OFFERS. IF YOU HAVE SPECIFIC QUESTIONS, PLEASE USE THE TELEPHONE, PERSONAL INTERVIEW QUESTIONS CAN CLARIFY FASTER THAN BY MAIL. A VIDEO OF THE CURRENT MACHINE CAN BE SENT ON REQUEST. IDEAL MACHINE FOR STAIR BUILDERS AND SOLID WOOD PROCESSOR 5 UNITS: 1 EDGE GRINDING UNIT WITH 120 MM BAND, PNEUMATIC BELT TENSION AND ELECTRO-PNEUMATIC CONTROLLED SANDING SHOE 2 MILLING UNITS 1, 5KW TO RADIUS MILLING, SWIVELING 2 UNITS OF PROFILE GRINDING WITH BELT AND ELECTRO-PNEUMATIC CONTROLLED SANDING SHOE SECURE WORKPIECE CLAMPING CHAIN PLATES AND UPPER PRESSURE ROLLER WORKPIECE THICKNESS UP TO APPROX. 60 MM ADJUSTABLE FEED SPEED EASY PULL-OUT WORKPIECE SUPPORT MACHINE IS CURRENTLY EQUIPPED WITH MILLING CUTTERS R8 OPERATING INSTRUCTIONS CE MARK AFTER PAINTED IN PLACES GREAT MACHINE WITH OUTSTANDING SANDING RESULTS, HARDLY REWORK REQUIRED. IDEAL FOR THE EFFICIENT PRODUCTION OF STAIRS OR TABLE TOPS. DIMENSIONS APPROX. 4000 X 1300 X 1900MM (LXWXH). WEIGHT APPROX. 1200KG. PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Ubicación: Land-- brush structuring machine or denibbing sander by brushes<br/><br/>- pressure rolls with nails/screws for aging solid wood<br/>- aggregate 1 : steel brush 5,5 kw<br/>- aggregate 2 : nylon brush 5,5 kw<br/>- aggregate 3 : 4 sanding brushes in v-line : 2,2 kw per brush<br/><br/>rotation speed per aggregate adjustable<br/>feed speed conveyor adjustable - BRUSH STRUCTURING MACHINE OR DENIBBING SANDER BY BRUSHES

- PRESSURE ROLLS WITH NAILS/SCREWS FOR AGING SOLID WOOD
- AGGREGATE 1 : STEEL BRUSH 5,5 KW
- AGGREGATE 2 : NYLON BRUSH 5,5 KW
- AGGREGATE 3 : 4 SANDING BRUSHES IN V-LINE : 2,2 KW PER BRUSH

ROTATION SPEED PER AGGREGATE ADJUSTABLE
FEED SPEED CONVEYOR ADJUSTABLE
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-dewatering station with membrane filter press for kieselguhr sludge
 
this complete dewatering station was designed by limburg for kieselguhr waste dewatering in to semidry cakes for easy waste disposal. the process is suitable also for dewatering other type of sludges. actual dewatering is made with latham side bar membrane filter press which reaches over 50 % dry (by weight) content of waste cake, inlet sludge being between 10 and 20 % dry content filter press is equipped with an automatic cloth washing system and an automatic cake discharge. shaker bars for discharge and plate opening and closing functions are hydraulically operated (limburg cake release control system). cloth washing is made in cycles and during the wash cycle, wash arm will individually wash one chamber at a time. process includes a sludge tank with agitation, sludge and water pumps, filtrate water tank with pump, filter press with auxiliaries, supporting structures and control cabinet with siemens simatic s 7-400 plc and siemens op 7 display. equipment was delivered in year 2000 and it is still installed and in good operational condition.
 
technical data:
made by: limburg – latham
made in year: 2000
inlet sludge dry content: 10 – 20%
capacity: max 3600 kg dry product / 24 hours
cake dry content: > 50% by weight
filtrate dry solid content: < 2 % by weight
latham filter press: side bar membrane 630
total filter area: 6.9 m2
total chamber volume: 99.8 dm3
plate size: 630 mm
working pressure: 7 barg
number of chambers: 12 (expandable to 15)
plate transport: automatic, multiple cake discharge
membrane filtration pump: 159 litres / min
sludge tank: 6 m3, aisi 316l
sludge tank agitator: 0.75 kw, 80 rpm, blade 660 mm
sludge pump capacity: 511 litres / min
filtrate tank: 1.5 m3, aisi 316l   DEWATERING STATION WITH MEMBRANE FILTER PRESS FOR KIESELGUHR SLUDGE THIS COMPLETE DEWATERING STATION WAS DESIGNED BY LIMBURG FOR KIESELGUHR WASTE DEWATERING IN TO SEMIDRY CAKES FOR EASY WASTE DISPOSAL. THE PROCESS IS SUITABLE ALSO FOR DEWATERING OTHER TYPE OF SLUDGES. ACTUAL DEWATERING IS MADE WITH LATHAM SIDE BAR MEMBRANE FILTER PRESS WHICH REACHES OVER 50 % DRY (BY WEIGHT) CONTENT OF WASTE CAKE, INLET SLUDGE BEING BETWEEN 10 AND 20 % DRY CONTENT FILTER PRESS IS EQUIPPED WITH AN AUTOMATIC CLOTH WASHING SYSTEM AND AN AUTOMATIC CAKE DISCHARGE. SHAKER BARS FOR DISCHARGE AND PLATE OPENING AND CLOSING FUNCTIONS ARE HYDRAULICALLY OPERATED (LIMBURG CAKE RELEASE CONTROL SYSTEM). CLOTH WASHING IS MADE IN CYCLES AND DURING THE WASH CYCLE, WASH ARM WILL INDIVIDUALLY WASH ONE CHAMBER AT A TIME. PROCESS INCLUDES A SLUDGE TANK WITH AGITATION, SLUDGE AND WATER PUMPS, FILTRATE WATER TANK WITH PUMP, FILTER PRESS WITH AUXILIARIES, SUPPORTING STRUCTURES AND CONTROL CABINET WITH SIEMENS SIMATIC S 7-400 PLC AND SIEMENS OP 7 DISPLAY. EQUIPMENT WAS DELIVERED IN YEAR 2000 AND IT IS STILL INSTALLED AND IN GOOD OPERATIONAL CONDITION. TECHNICAL DATA: MADE BY: LIMBURG – LATHAM MADE IN YEAR: 2000 INLET SLUDGE DRY CONTENT: 10 – 20% CAPACITY: MAX 3600 KG DRY PRODUCT / 24 HOURS CAKE DRY CONTENT: > 50% BY WEIGHT FILTRATE DRY SOLID CONTENT: < 2 % BY WEIGHT LATHAM FILTER PRESS: SIDE BAR MEMBRANE 630 TOTAL FILTER AREA: 6.9 M2 TOTAL CHAMBER VOLUME: 99.8 DM3 PLATE SIZE: 630 MM WORKING PRESSURE: 7 BARG NUMBER OF CHAMBERS: 12 (EXPANDABLE TO 15) PLATE TRANSPORT: AUTOMATIC, MULTIPLE CAKE DISCHARGE MEMBRANE FILTRATION PUMP: 159 LITRES / MIN SLUDGE TANK: 6 M3, AISI 316L SLUDGE TANK AGITATOR: 0.75 KW, 80 RPM, BLADE 660 MM SLUDGE PUMP CAPACITY: 511 LITRES / MIN FILTRATE TANK: 1.5 M3, AISI 316L
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-calibrating and/or squaring line with edge banding doing panels all round in 2 passes<br/>panel width min/max: 220 / 1000 mm<br/>panel length min/max: 320 / 3200 mm<br/>edges max. 3 x 45 mm.<br/>fixed side at the left<br/>siemens smspc controls<br/><br/>line set up:<br/>vacuum feeder <br/>turning station length to cross<br/>double end tenoner<br/>turning station length to cross<br/>double squaring and edgebanding <br/>turning station cross to length<br/>vacuum stacker<br/><br/>1.01 feeder, type car ms 2000<br/>2-lane<br/><br/>1.02 turning station length-cross, type tr 100<br/>90° turning of workpieces by means of 2 clamping discs<br/><br/>1.03 double end tenoner, type si_v 112 - schéma 4500<br/>squaring panels or calibrating/shaping solid wood panels<br/>panel feed by chains, chain width 80 mm <br/>max. pass in thickness 150 mm<br/>feed speed 7 to 36 m/min<br/>equipment:<br/>1+1 jump scorer, motor 1,4 kw (max. panel thickness 80 mm)<br/>1+1 hogger, motor 7,35 kw<br/>1+1 jump shaper, motor 7,35 kw<br/>1+1 shaper, motor 7,35 kw<br/>1+1 shaper rounding the leading panel corner on solid wood panels (radius max. 40 mm, panel thickness max 50 mm)<br/>1+1 shaper rounding the leading panel corner on solid wood panels (radius max. 40 mm, panel thickness max 50 mm)<br/><br/>1.04 turning station length-cross, type tr 100<br/>90° turning of workpieces by means of 2 clamping discs<br/><br/>1.05 double sided squaring and edge banding machine, type panelmatic 2 - schéma g9i - 10530 mm<br/>1st and 2nd pass machine<br/>infeed chain with 1300 mm length in order to take 1220 mm panels<br/>panel alignment at the infeed<br/>roller chain with bearings<br/>automatic pop-up dogs with 540 mm centers<br/>max. panel thickness 60 mm<br/>equipment:<br/>1+1 jump scorer, motor 1,4 kw<br/>1+1 hogger, motor 7,35 kw<br/>1+1 jump shaper 7,35 kw<br/>1+1 jump shaper 7,35 kw<br/>1+1 hot melt glue application by roller with pre-melting, unit tilting 0 - 4 ° <br/>1+1 twin coil edge magazine, edges max. 3 CALIBRATING AND/OR SQUARING LINE WITH EDGE BANDING DOING PANELS ALL ROUND IN 2 PASSES
PANEL WIDTH MIN/MAX: 220 / 1000 MM
PANEL LENGTH MIN/MAX: 320 / 3200 MM
EDGES MAX. 3 X 45 MM.
FIXED SIDE AT THE LEFT
SIEMENS SMSPC CONTROLS

LINE SET UP:
VACUUM FEEDER
TURNING STATION LENGTH TO CROSS
DOUBLE END TENONER
TURNING STATION LENGTH TO CROSS
DOUBLE SQUARING AND EDGEBANDING
TURNING STATION CROSS TO LENGTH
VACUUM STACKER

1.01 FEEDER, TYPE CAR MS 2000
2-LANE

1.02 TURNING STATION LENGTH-CROSS, TYPE TR 100
90° TURNING OF WORKPIECES BY MEANS OF 2 CLAMPING DISCS

1.03 DOUBLE END TENONER, TYPE SI_V 112 - SCHéMA 4500
SQUARING PANELS OR CALIBRATING/SHAPING SOLID WOOD PANELS
PANEL FEED BY CHAINS, CHAIN WIDTH 80 MM
MAX. PASS IN THICKNESS 150 MM
FEED SPEED 7 TO 36 M/MIN
EQUIPMENT:
1+1 JUMP SCORER, MOTOR 1,4 KW (MAX. PANEL THICKNESS 80 MM)
1+1 HOGGER, MOTOR 7,35 KW
1+1 JUMP SHAPER, MOTOR 7,35 KW
1+1 SHAPER, MOTOR 7,35 KW
1+1 SHAPER ROUNDING THE LEADING PANEL CORNER ON SOLID WOOD PANELS (RADIUS MAX. 40 MM, PANEL THICKNESS MAX 50 MM)
1+1 SHAPER ROUNDING THE LEADING PANEL CORNER ON SOLID WOOD PANELS (RADIUS MAX. 40 MM, PANEL THICKNESS MAX 50 MM)

1.04 TURNING STATION LENGTH-CROSS, TYPE TR 100
90° TURNING OF WORKPIECES BY MEANS OF 2 CLAMPING DISCS

1.05 DOUBLE SIDED SQUARING AND EDGE BANDING MACHINE, TYPE PANELMATIC 2 - SCHéMA G9I - 10530 MM
1ST AND 2ND PASS MACHINE
INFEED CHAIN WITH 1300 MM LENGTH IN ORDER TO TAKE 1220 MM PANELS
PANEL ALIGNMENT AT THE INFEED
ROLLER CHAIN WITH BEARINGS
AUTOMATIC POP-UP DOGS WITH 540 MM CENTERS
MAX. PANEL THICKNESS 60 MM
EQUIPMENT:
1+1 JUMP SCORER, MOTOR 1,4 KW
1+1 HOGGER, MOTOR 7,35 KW
1+1 JUMP SHAPER 7,35 KW
1+1 JUMP SHAPER 7,35 KW
1+1 HOT MELT GLUE APPLICATION BY ROLLER WITH PRE-MELTING, UNIT TILTING 0 - 4 °
1+1 TWIN COIL EDGE MAGAZINE, EDGES MAX. 3
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-technical data:

brand: cover

type: fp 3

control: dialog 4

-traverse path x approx. 400 mm, y 400 mm, z 500 mm

-solid angle table

-speed: up to 5000 rpm

-milling head swiveling

-sleeve: sk 40

-weight ca: 2000 kg

-space ca: t: 2.80 m, b: 2.20 m, h: 2.0 m

TECHNICAL DATA: BRAND: COVER TYPE: FP 3 CONTROL: DIALOG 4 -TRAVERSE PATH X APPROX. 400 MM, Y 400 MM, Z 500 MM -SOLID ANGLE TABLE -SPEED: UP TO 5000 RPM -MILLING HEAD SWIVELING -SLEEVE: SK 40 -WEIGHT CA: 2000 KG -SPACE CA: T: 2.80 M, B: 2.20 M, H: 2.0 M
Vendedor: A-Z Maschinenwelt
Año de construcción: usado
Ubicación: Land-panel thickness: 12 - 60 mm<br/>feed speed: 18 - 24 m/min<br/>edge thickness: 0,4 - 3 mm for coil edges, 0,4 - 20 mm for strips / solid wood<br/><br/>equipment: <br/>help carriage feeding the panels rectangular<br/>automatic fence at the infeed<br/>squaring device: 2 x 3,0 kw<br/>panel edge pre-heater<br/>hot melt unit: qa34 / a20 <br/>edge magazine <br/>lateral pressure rollers, thickness programmable, 1 driven, 6 non-driven rollers<br/>end trims hl83, programmable change straight/chamfer, 2 motors 0,5 kw<br/>rough trimming: 2 x 1,5 kw<br/>top/bottom fine trimming, tilting, 2 x 0,4 kw<br/>contour trimming fk 13, 2 x 0,4 kw, with 8-fold toolchangers<br/>universal milling motor 4kw <br/>profile scrapers<br/>flat scrapers<br/>buffing unit with oscillation<br/>controlls: homatic nc16 PANEL THICKNESS: 12 - 60 MM
FEED SPEED: 18 - 24 M/MIN
EDGE THICKNESS: 0,4 - 3 MM FOR COIL EDGES, 0,4 - 20 MM FOR STRIPS / SOLID WOOD

EQUIPMENT:
HELP CARRIAGE FEEDING THE PANELS RECTANGULAR
AUTOMATIC FENCE AT THE INFEED
SQUARING DEVICE: 2 X 3,0 KW
PANEL EDGE PRE-HEATER
HOT MELT UNIT: QA34 / A20
EDGE MAGAZINE
LATERAL PRESSURE ROLLERS, THICKNESS PROGRAMMABLE, 1 DRIVEN, 6 NON-DRIVEN ROLLERS
END TRIMS HL83, PROGRAMMABLE CHANGE STRAIGHT/CHAMFER, 2 MOTORS 0,5 KW
ROUGH TRIMMING: 2 X 1,5 KW
TOP/BOTTOM FINE TRIMMING, TILTING, 2 X 0,4 KW
CONTOUR TRIMMING FK 13, 2 X 0,4 KW, WITH 8-FOLD TOOLCHANGERS
UNIVERSAL MILLING MOTOR 4KW
PROFILE SCRAPERS
FLAT SCRAPERS
BUFFING UNIT WITH OSCILLATION
CONTROLLS: HOMATIC NC16
Vendedor: Vebim
Año de construcción: usado
Precio: 1.500 €
Ubicación: Land-
description
brand	cleveland
model	tket-6t
id	7296
status	active
price	1.500 € + vat
year of manufacture	1999
location	oradea (ro)

twin steam jacketed tilting kettle, cleveland tket-6t manufactured in 1999, made of stainless steel with manual tilting for easy drain, steam jacket filled with treated water that does not require refilling or venting. the temperature control is accurate and consistant with a solid state temperature control (mechanical thermostate are less accurate),  operating temperature range from 145° - 260°f (63°c - 127°c), control panel includes: led indicator for heat cycle, led indicator for low water, power on/off switch, adjustable temperature control dial. rear mounted easy access pressure gauge and pressure relief valve to prevent tampering. color coded easy to read pressure gauge with DESCRIPTION BRAND CLEVELAND MODEL TKET-6T ID 7296 STATUS ACTIVE PRICE 1.500 € + VAT YEAR OF MANUFACTURE 1999 LOCATION ORADEA (RO) TWIN STEAM JACKETED TILTING KETTLE, CLEVELAND TKET-6T MANUFACTURED IN 1999, MADE OF STAINLESS STEEL WITH MANUAL TILTING FOR EASY DRAIN, STEAM JACKET FILLED WITH TREATED WATER THAT DOES NOT REQUIRE REFILLING OR VENTING. THE TEMPERATURE CONTROL IS ACCURATE AND CONSISTANT WITH A SOLID STATE TEMPERATURE CONTROL (MECHANICAL THERMOSTATE ARE LESS ACCURATE), OPERATING TEMPERATURE RANGE FROM 145° - 260°F (63°C - 127°C), CONTROL PANEL INCLUDES: LED INDICATOR FOR HEAT CYCLE, LED INDICATOR FOR LOW WATER, POWER ON/OFF SWITCH, ADJUSTABLE TEMPERATURE CONTROL DIAL. REAR MOUNTED EASY ACCESS PRESSURE GAUGE AND PRESSURE RELIEF VALVE TO PREVENT TAMPERING. COLOR CODED EASY TO READ PRESSURE GAUGE WITH "GREEN" AND "VENT AIR ZONE", SAFETY VALVE FOR PRESSURES GREATER THAN 50 PSI. EXWORKS. PRICE IS NEGOTIABLE. CONTACT TEL.: +40-359/175.575 FAX: +40-259/426.248 MOBIL: +40-743/177.040 ; +40-740/221.698 TECHNICAL INSPECTION CAN BE ORGANIZED AT LEAST 24 HRS BEFORE THE DUE DATE WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. (+40-740/221.698 ) HABLAMOS ESPAñOL. BESZéLüNK MAGYARUL. (+40-743/177.040 ) IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Ubicación: Land-hotmeltapplication<br/>used for veneer and pvc edges and solidwood edges<br/>working speed determined by driven roller<br/>working piece length: min 180 mm<br/>working piece thickness: 10 - 55 mm<br/>working piece width: min ca. 30 mm<br/>edge thickness: 0,5 - 1,0 mm (for edges with height max. 60 mm)<br/>0,5 - 3,0 mm (for edges with height max. 30 mm)<br/>inner radius (for glueing) min. ca. 25 mm plus edge thickness<br/>variable speed: 4 - 9 m/min<br/>power:  3,6 kw<br/>air pressure: 6 bar<br/>working height: 900 mm HOTMELTAPPLICATION
USED FOR VENEER AND PVC EDGES AND SOLIDWOOD EDGES
WORKING SPEED DETERMINED BY DRIVEN ROLLER
WORKING PIECE LENGTH: MIN 180 MM
WORKING PIECE THICKNESS: 10 - 55 MM
WORKING PIECE WIDTH: MIN CA. 30 MM
EDGE THICKNESS: 0,5 - 1,0 MM (FOR EDGES WITH HEIGHT MAX. 60 MM)
0,5 - 3,0 MM (FOR EDGES WITH HEIGHT MAX. 30 MM)
INNER RADIUS (FOR GLUEING) MIN. CA. 25 MM PLUS EDGE THICKNESS
VARIABLE SPEED: 4 - 9 M/MIN
POWER: 3,6 KW
AIR PRESSURE: 6 BAR
WORKING HEIGHT: 900 MM
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-* new machine *.
â?¢ pneumatic pressure adjustment of the pressure bar
â?¢ 4 presses on swivel base plate
â?¢ heat dust cover
â?¢ the press angle 45 degrees = / 90 degrees
â?¢ blower dryer
â?¢ solid construction

technical data:
machine dimensions (lxwxh): 1800 x 1250 x 1750
performance: 4-8kw
pressure: 8 bar
weight: 250kg * NEW MACHINE *. &ACIRC;?&CENT; PNEUMATIC PRESSURE ADJUSTMENT OF THE PRESSURE BAR &ACIRC;?&CENT; 4 PRESSES ON SWIVEL BASE PLATE &ACIRC;?&CENT; HEAT DUST COVER &ACIRC;?&CENT; THE PRESS ANGLE 45 DEGREES = / 90 DEGREES &ACIRC;?&CENT; BLOWER DRYER &ACIRC;?&CENT; SOLID CONSTRUCTION TECHNICAL DATA: MACHINE DIMENSIONS (LXWXH): 1800 X 1250 X 1750 PERFORMANCE: 4-8KW PRESSURE: 8 BAR WEIGHT: 250KG
Vendedor: YUKE
Año de construcción: usado
Precio: 29.200 EU€
Ubicación: Land-cnc lathe - a numerically controlled machine tool designed for machining objects most often with a surface of solids (shafts, cones, balls, internal and external threads). the machining tool is most often a turning tool, a drill bit or threading tools, additionally two tools with a separate one drive. the gang tool system consists in the application of many tools permanently installed in the lathe and their use during the production process. machining on a lathe is called turning. turning is performed by turning the workpiece into a rotary motion, and then cutting its surface with a machining tool. the workpiece is fastened for this purpose in the holder with the use of various frames, provided that the workpiece has a diameter of no more than 32 mm. CNC LATHE - A NUMERICALLY CONTROLLED MACHINE TOOL DESIGNED FOR MACHINING OBJECTS MOST OFTEN WITH A SURFACE OF SOLIDS (SHAFTS, CONES, BALLS, INTERNAL AND EXTERNAL THREADS). THE MACHINING TOOL IS MOST OFTEN A TURNING TOOL, A DRILL BIT OR THREADING TOOLS, ADDITIONALLY TWO TOOLS WITH A SEPARATE ONE DRIVE. THE GANG TOOL SYSTEM CONSISTS IN THE APPLICATION OF MANY TOOLS PERMANENTLY INSTALLED IN THE LATHE AND THEIR USE DURING THE PRODUCTION PROCESS. MACHINING ON A LATHE IS CALLED TURNING. TURNING IS PERFORMED BY TURNING THE WORKPIECE INTO A ROTARY MOTION, AND THEN CUTTING ITS SURFACE WITH A MACHINING TOOL. THE WORKPIECE IS FASTENED FOR THIS PURPOSE IN THE HOLDER WITH THE USE OF VARIOUS FRAMES, PROVIDED THAT THE WORKPIECE HAS A DIAMETER OF NO MORE THAN 32 MM.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-with digital display for lateral axis.
clamping surface of the solid table 195 x 605 mm
table movement along autom. and hand 290/300 mm
table motion vertical machine. and hand 330/340 mm
spindle stock cross movement by hand 150 mm
spindle carrier isa 40
spindle speeds of 40-2000 rpm.
spindle drive 1/1.4 kw
weight approx. 660 kg.
accessories: separate control cabinet. WITH DIGITAL DISPLAY FOR LATERAL AXIS. CLAMPING SURFACE OF THE SOLID TABLE 195 X 605 MM TABLE MOVEMENT ALONG AUTOM. AND HAND 290/300 MM TABLE MOTION VERTICAL MACHINE. AND HAND 330/340 MM SPINDLE STOCK CROSS MOVEMENT BY HAND 150 MM SPINDLE CARRIER ISA 40 SPINDLE SPEEDS OF 40-2000 RPM. SPINDLE DRIVE 1/1.4 KW WEIGHT APPROX. 660 KG. ACCESSORIES: SEPARATE CONTROL CABINET.
Vendedor: Schraag Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 30 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 1750 x 1000 x 950 mm<br/>description: massive, very solid and resistant WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 1750 X 1000 X 950 MM
DESCRIPTION: MASSIVE, VERY SOLID AND RESISTANT
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-electronically controlled milling and edges in glue, rework and drilling centre to the commission-wise production of furniture parts,
solid wood or similar materials.
prepared for einwechselbares gluing unit.

base machine:
-bed stable heavy-duty compact linear guide system. preloaded gear rack drives and digital ac servo motors in the x - and y-axes
-unit carrier with linear guiding system,
ball screw and digital ac servo motor to the position of the z axis,
travel 535 mm
 
clamping table at baz211/40/k
-clamping table integrated into the machine bed
  a rigid steel construction with
  linear guides in the longitudinal direction to the
  adjustment of the clamping brackets

power control - control:
  
basic equipment:
-remote diagnostics via modem
  billing according a separate remote service contract
  if completed (not included)
-at baz211/40 + 52
  1 water ring vacuum pump with 100 m3/h
  (corresponds to power a 140 m3/h rotary vane vacuum pump) for clamping system
-pneumatic connection r 1/2 inch, 7 bar
-maximum speed:
-60 m/min in x - and y-direction
-30 m/min in z-direction

technical data:
-workpiece length
maximum 4000 mm for single occupancy
1375 mm pendant occupancy
1550 mm pendant occupancy for milling
with water meters diameter. 25 mm
-width of the work piece stop front: (operating side)
-max 1220 mm for milling tool
  diameter 25 mm
-max 1220 mm with glue
-1150 mm max for all units
-width of the work piece stop rear:
  (auxiliary fence table back)
-1350 mm for machining with tool
  diameter 25 mm
-max 1250 mm with glue
-max 1220 mm for all units
-workpiece thickness
-60 mm with standard clamp in use
  gluing unit
-max 300 mm incl. clamping device in use
  as a router
-up to 60 mm with standard clamp without
  constraint for aggregates and extraction
-in the radius milling min. 16 mm or
  2 x radius + 10 mm
-the specified dimensions are not the maximum possible editing values
  to equate per unit â?? see separate
  tables
-minimum size of the workpiece depending on:
  clamping devices, workpiece surface and contour
-working height bottom workpiece 950 mm
-soil conditions must comply with the foundation plan

7.5 kw liquid-cooled main spindle
-for hsk f63 - din 69893
  
spindle return stroke
-allows the use of the drill head with
  form milling tool in the main spindle
-tool length incl. sleeve
  up to 150 mm
  
c-axis with units - electronic interface
-for mounting of the machining and gluing aggregates with integrated pneumatic electrical electronics supply and actuator programming for cnc drawing

laser positioning aid for vacuum clamp

id: 7313 1 times
extra connectors for clamping devices

id: 7011 1 times
sicherheitsabschrankung side panel left + right

id: 7325 1 times
shuttle machining bxxx/30 /...

id: 7301 2 piece
lateral and longitudinal stop bolt

note
as the auxiliary stops right rear

id: 7207 6 pieces
stroke rail for console table b200

note:
to console 1 to 3 and 5 to 7

number: 1 times
extension boom b200
allows you to edit the width of a workpiece
in attack, rear
-1730 mm max for milling tool diameter 25 mm
-max 1600 mm for all units

id: 7450 1 piece
plate changer 18 x instead of 12 x optimat

id: 7403 1 piece
drill head instead of 17 spindles 12 spindles

id: 7515 1 piece
saw / drill unit swiveling f.wz changer
-unlimited swiveling about c-axis

id: 7547 1 piece
corner notching unit for wz changer
unlimited swiveling on c-axis.

id: 7523 1 piece
drilling / milling unit 4-spindle f. wz-changer
unlimited swiveling on c-axis.

id: 7565 1 piece
blow-off nozzle for wz changer by the edge of the workpiece

id: 7617 1 piece
gluing unit 360-degree optimat

id: 7607 1 piece
heiã?luftdã?se for gluing unit 360 degrees

number: 7633 1 piece
7703 before crosscutting station and 1 x roll number: 1 piece
combi-buendigfraes - after cleaning unit f. wz-w.

id: 7721 2 piece
wpl - radius cutter head

id: 7877 7 times
led position display system console 1300-1600 mm ELECTRONICALLY CONTROLLED MILLING AND EDGES IN GLUE, REWORK AND DRILLING CENTRE TO THE COMMISSION-WISE PRODUCTION OF FURNITURE PARTS, SOLID WOOD OR SIMILAR MATERIALS. PREPARED FOR EINWECHSELBARES GLUING UNIT. BASE MACHINE: -BED STABLE HEAVY-DUTY COMPACT LINEAR GUIDE SYSTEM. PRELOADED GEAR RACK DRIVES AND DIGITAL AC SERVO MOTORS IN THE X - AND Y-AXES -UNIT CARRIER WITH LINEAR GUIDING SYSTEM, BALL SCREW AND DIGITAL AC SERVO MOTOR TO THE POSITION OF THE Z AXIS, TRAVEL 535 MM CLAMPING TABLE AT BAZ211/40/K -CLAMPING TABLE INTEGRATED INTO THE MACHINE BED A RIGID STEEL CONSTRUCTION WITH LINEAR GUIDES IN THE LONGITUDINAL DIRECTION TO THE ADJUSTMENT OF THE CLAMPING BRACKETS POWER CONTROL - CONTROL: BASIC EQUIPMENT: -REMOTE DIAGNOSTICS VIA MODEM BILLING ACCORDING A SEPARATE REMOTE SERVICE CONTRACT IF COMPLETED (NOT INCLUDED) -AT BAZ211/40 + 52 1 WATER RING VACUUM PUMP WITH 100 M3/H (CORRESPONDS TO POWER A 140 M3/H ROTARY VANE VACUUM PUMP) FOR CLAMPING SYSTEM -PNEUMATIC CONNECTION R 1/2 INCH, 7 BAR -MAXIMUM SPEED: -60 M/MIN IN X - AND Y-DIRECTION -30 M/MIN IN Z-DIRECTION TECHNICAL DATA: -WORKPIECE LENGTH MAXIMUM 4000 MM FOR SINGLE OCCUPANCY 1375 MM PENDANT OCCUPANCY 1550 MM PENDANT OCCUPANCY FOR MILLING WITH WATER METERS DIAMETER. 25 MM -WIDTH OF THE WORK PIECE STOP FRONT: (OPERATING SIDE) -MAX 1220 MM FOR MILLING TOOL DIAMETER 25 MM -MAX 1220 MM WITH GLUE -1150 MM MAX FOR ALL UNITS -WIDTH OF THE WORK PIECE STOP REAR: (AUXILIARY FENCE TABLE BACK) -1350 MM FOR MACHINING WITH TOOL DIAMETER 25 MM -MAX 1250 MM WITH GLUE -MAX 1220 MM FOR ALL UNITS -WORKPIECE THICKNESS -60 MM WITH STANDARD CLAMP IN USE GLUING UNIT -MAX 300 MM INCL. CLAMPING DEVICE IN USE AS A ROUTER -UP TO 60 MM WITH STANDARD CLAMP WITHOUT CONSTRAINT FOR AGGREGATES AND EXTRACTION -IN THE RADIUS MILLING MIN. 16 MM OR 2 X RADIUS + 10 MM -THE SPECIFIED DIMENSIONS ARE NOT THE MAXIMUM POSSIBLE EDITING VALUES TO EQUATE PER UNIT &ACIRC;?? SEE SEPARATE TABLES -MINIMUM SIZE OF THE WORKPIECE DEPENDING ON: CLAMPING DEVICES, WORKPIECE SURFACE AND CONTOUR -WORKING HEIGHT BOTTOM WORKPIECE 950 MM -SOIL CONDITIONS MUST COMPLY WITH THE FOUNDATION PLAN 7.5 KW LIQUID-COOLED MAIN SPINDLE -FOR HSK F63 - DIN 69893 SPINDLE RETURN STROKE -ALLOWS THE USE OF THE DRILL HEAD WITH FORM MILLING TOOL IN THE MAIN SPINDLE -TOOL LENGTH INCL. SLEEVE UP TO 150 MM C-AXIS WITH UNITS - ELECTRONIC INTERFACE -FOR MOUNTING OF THE MACHINING AND GLUING AGGREGATES WITH INTEGRATED PNEUMATIC ELECTRICAL ELECTRONICS SUPPLY AND ACTUATOR PROGRAMMING FOR CNC DRAWING LASER POSITIONING AID FOR VACUUM CLAMP ID: 7313 1 TIMES EXTRA CONNECTORS FOR CLAMPING DEVICES ID: 7011 1 TIMES SICHERHEITSABSCHRANKUNG SIDE PANEL LEFT + RIGHT ID: 7325 1 TIMES SHUTTLE MACHINING BXXX/30 /... ID: 7301 2 PIECE LATERAL AND LONGITUDINAL STOP BOLT NOTE AS THE AUXILIARY STOPS RIGHT REAR ID: 7207 6 PIECES STROKE RAIL FOR CONSOLE TABLE B200 NOTE: TO CONSOLE 1 TO 3 AND 5 TO 7 NUMBER: 1 TIMES EXTENSION BOOM B200 ALLOWS YOU TO EDIT THE WIDTH OF A WORKPIECE IN ATTACK, REAR -1730 MM MAX FOR MILLING TOOL DIAMETER 25 MM -MAX 1600 MM FOR ALL UNITS ID: 7450 1 PIECE PLATE CHANGER 18 X INSTEAD OF 12 X OPTIMAT ID: 7403 1 PIECE DRILL HEAD INSTEAD OF 17 SPINDLES 12 SPINDLES ID: 7515 1 PIECE SAW / DRILL UNIT SWIVELING F.WZ CHANGER -UNLIMITED SWIVELING ABOUT C-AXIS ID: 7547 1 PIECE CORNER NOTCHING UNIT FOR WZ CHANGER UNLIMITED SWIVELING ON C-AXIS. ID: 7523 1 PIECE DRILLING / MILLING UNIT 4-SPINDLE F. WZ-CHANGER UNLIMITED SWIVELING ON C-AXIS. ID: 7565 1 PIECE BLOW-OFF NOZZLE FOR WZ CHANGER BY THE EDGE OF THE WORKPIECE ID: 7617 1 PIECE GLUING UNIT 360-DEGREE OPTIMAT ID: 7607 1 PIECE HEI&ATILDE;?LUFTD&ATILDE;?SE FOR GLUING UNIT 360 DEGREES NUMBER: 7633 1 PIECE 7703 BEFORE CROSSCUTTING STATION AND 1 X ROLL NUMBER: 1 PIECE COMBI-BUENDIGFRAES - AFTER CLEANING UNIT F. WZ-W. ID: 7721 2 PIECE WPL - RADIUS CUTTER HEAD ID: 7877 7 TIMES LED POSITION DISPLAY SYSTEM CONSOLE 1300-1600 MM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: 2.650 
Ubicación: Land-pressure: 13 bar <br/>motor: 4 kw <br/>voltage: 400 volt <br/> / 50 hz <br/>free air delivery: 0,39 m³/min <br/>measurement (wxhxd): 950 / 900 / 550 <br/>weight: 160 kg <br/>compressed air connection: ½ <br/> PRESSURE: 13 BAR
MOTOR: 4 KW
VOLTAGE: 400 VOLT
/ 50 HZ
FREE AIR DELIVERY: 0,39 M³/MIN
MEASUREMENT (WXHXD): 950 / 900 / 550
WEIGHT: 160 KG
COMPRESSED AIR CONNECTION: ½
Vendedor: BOGE KOMPRESSOREN Otto Boge GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-shrink tunnels, shrink shrink machine
manufacturer: diez
type: htc 8040 d
year of construction: 2018

operating side: in the running direction right
adjustable temperature range: up to 220 â° c.
supply voltage: 400v ac, 50 hz, 3 ph + n + pe
power consumption: 35 kw
nominal current: 55 a
with cable and 63a cee plug
band-width: 850 mm
clearance height: 390 mm
working height: 830 + 100

external dimensions:
length: 2650 mm
width: 1510 mm
height: 1680 mm

can be used behind each wrapping machine
machine frame in solid welded frame construction
transport speed infinitely variable via frequency converter
transport system: stainless steel wire mesh band
low-noise dual high performance blower
adjustable airflow in the tunnel
precise temperature control with electronic thermostat
standard equipment with plate feet and casters
transitional roles for narrow products at tunnel input and discharge
colour ral 5012
use of all the slides (polyolefin fine shrink film, pvc fine shrink films,
ldpe, hdpe and mdpe foil)
temperatures up to 180 â° c
machine new (vorfã¼hrmaschine)
 SHRINK TUNNELS, SHRINK SHRINK MACHINE MANUFACTURER: DIEZ TYPE: HTC 8040 D YEAR OF CONSTRUCTION: 2018 OPERATING SIDE: IN THE RUNNING DIRECTION RIGHT ADJUSTABLE TEMPERATURE RANGE: UP TO 220 &ACIRC;&DEG; C. SUPPLY VOLTAGE: 400V AC, 50 HZ, 3 PH + N + PE POWER CONSUMPTION: 35 KW NOMINAL CURRENT: 55 A WITH CABLE AND 63A CEE PLUG BAND-WIDTH: 850 MM CLEARANCE HEIGHT: 390 MM WORKING HEIGHT: 830 + 100 EXTERNAL DIMENSIONS: LENGTH: 2650 MM WIDTH: 1510 MM HEIGHT: 1680 MM CAN BE USED BEHIND EACH WRAPPING MACHINE MACHINE FRAME IN SOLID WELDED FRAME CONSTRUCTION TRANSPORT SPEED INFINITELY VARIABLE VIA FREQUENCY CONVERTER TRANSPORT SYSTEM: STAINLESS STEEL WIRE MESH BAND LOW-NOISE DUAL HIGH PERFORMANCE BLOWER ADJUSTABLE AIRFLOW IN THE TUNNEL PRECISE TEMPERATURE CONTROL WITH ELECTRONIC THERMOSTAT STANDARD EQUIPMENT WITH PLATE FEET AND CASTERS TRANSITIONAL ROLES FOR NARROW PRODUCTS AT TUNNEL INPUT AND DISCHARGE COLOUR RAL 5012 USE OF ALL THE SLIDES (POLYOLEFIN FINE SHRINK FILM, PVC FINE SHRINK FILMS, LDPE, HDPE AND MDPE FOIL) TEMPERATURES UP TO 180 &ACIRC;&DEG; C MACHINE NEW (VORF&ATILDE;&FRAC14;HRMASCHINE)
Vendedor: METEC GmbH
Año de construcción: usado
Precio: 825 
Ubicación: Land-pressure: 10 bar <br/>motor: 1,8 kw <br/>free air delivery: 0,18 m³/min <br/>measurement (wxhxd): 850 x 940 x 490 <br/>weight: 80 kg <br/> PRESSURE: 10 BAR
MOTOR: 1,8 KW
FREE AIR DELIVERY: 0,18 M³/MIN
MEASUREMENT (WXHXD): 850 X 940 X 490
WEIGHT: 80 KG
Vendedor: BOGE KOMPRESSOREN Otto Boge GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-shrink tunnels, shrink shrink machine
manufacturer: diez
type: htc 8030 lx
year of construction: 2018

operating side: in the running direction right
adjustable temperature range: up to 220 â° c.
supply voltage: 400v ac, 50 hz, 3 ph + n + pe
power: 18 kw
nominal current: 29 a
with cable and 63a cee plug
band-width: 800 mm
clearance height: approx. 300 mm
working height: 860 + 100 mm

external dimensions:
length: 1830 mm
width: 1420 mm
height: 1320 mm
weight: 600 kg

can be used behind each wrapping machine
with isolated lateral window and lighting
shrink hood can be opened upwards
machine frame in solid welded frame construction
transport speed infinitely variable via frequency converter
transport system: stainless steel wire mesh band
low-noise dual high performance blower
adjustable airflow in the tunnel
precise temperature control with electronic thermostat
standard equipment with plate feet and casters
transitional roles for narrow products at tunnel input and discharge
colour ral 5012
use of all the slides (fine polyolefin shrink film, pvc shrink fine, foils, ldpe, hdpe and mdpe foil)
temperatures up to 180 â° c
machine new (vorfã¼hrmaschine)
 SHRINK TUNNELS, SHRINK SHRINK MACHINE MANUFACTURER: DIEZ TYPE: HTC 8030 LX YEAR OF CONSTRUCTION: 2018 OPERATING SIDE: IN THE RUNNING DIRECTION RIGHT ADJUSTABLE TEMPERATURE RANGE: UP TO 220 &ACIRC;&DEG; C. SUPPLY VOLTAGE: 400V AC, 50 HZ, 3 PH + N + PE POWER: 18 KW NOMINAL CURRENT: 29 A WITH CABLE AND 63A CEE PLUG BAND-WIDTH: 800 MM CLEARANCE HEIGHT: APPROX. 300 MM WORKING HEIGHT: 860 + 100 MM EXTERNAL DIMENSIONS: LENGTH: 1830 MM WIDTH: 1420 MM HEIGHT: 1320 MM WEIGHT: 600 KG CAN BE USED BEHIND EACH WRAPPING MACHINE WITH ISOLATED LATERAL WINDOW AND LIGHTING SHRINK HOOD CAN BE OPENED UPWARDS MACHINE FRAME IN SOLID WELDED FRAME CONSTRUCTION TRANSPORT SPEED INFINITELY VARIABLE VIA FREQUENCY CONVERTER TRANSPORT SYSTEM: STAINLESS STEEL WIRE MESH BAND LOW-NOISE DUAL HIGH PERFORMANCE BLOWER ADJUSTABLE AIRFLOW IN THE TUNNEL PRECISE TEMPERATURE CONTROL WITH ELECTRONIC THERMOSTAT STANDARD EQUIPMENT WITH PLATE FEET AND CASTERS TRANSITIONAL ROLES FOR NARROW PRODUCTS AT TUNNEL INPUT AND DISCHARGE COLOUR RAL 5012 USE OF ALL THE SLIDES (FINE POLYOLEFIN SHRINK FILM, PVC SHRINK FINE, FOILS, LDPE, HDPE AND MDPE FOIL) TEMPERATURES UP TO 180 &ACIRC;&DEG; C MACHINE NEW (VORF&ATILDE;&FRAC14;HRMASCHINE)
Vendedor: METEC GmbH
Año de construcción: usado
Precio: 6.995 
Ubicación: Land-pressure: 13 bar <br/>motor: 37 kw <br/>free air delivery: 4,5 m³/min <br/>measurement (wxhxd): 1350 x 1585 x 900 <br/>weight: 635 kg <br/>compressed air connection: 1 1/4 <br/> PRESSURE: 13 BAR
MOTOR: 37 KW
FREE AIR DELIVERY: 4,5 M³/MIN
MEASUREMENT (WXHXD): 1350 X 1585 X 900
WEIGHT: 635 KG
COMPRESSED AIR CONNECTION: 1 1/4
Vendedor: BOGE KOMPRESSOREN Otto Boge GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-hormes solo screw capper

solo sv

capacity: 
30,000 bottles / h

other: 

solo capper

- 14 capping stations

- solid construction made of stainless steel

- control: plc (b+r) with large operator panel

- drives: servo drives

- safety housing and safety devices

adaption to client´s requirements optional HORMES SOLO SCREW CAPPER SOLO SV CAPACITY: 30,000 BOTTLES / H OTHER: SOLO CAPPER - 14 CAPPING STATIONS - SOLID CONSTRUCTION MADE OF STAINLESS STEEL - CONTROL: PLC (B+R) WITH LARGE OPERATOR PANEL - DRIVES: SERVO DRIVES - SAFETY HOUSING AND SAFETY DEVICES ADAPTION TO CLIENT´S REQUIREMENTS OPTIONAL
Vendedor: Ohrter Getränkemaschinen Handel
Año de construcción: usado
Precio: 5.500 
Ubicación: Land-pressure: 10 bar <br/>motor: 30 kw <br/>voltage: 400 volt <br/> / 50 hz <br/>free air delivery: 4,3 m³/min <br/>measurement (wxhxd): 1350 / 1585 / 900 <br/>weight: 590 kg <br/>compressed air connection: 1¼ <br/> PRESSURE: 10 BAR
MOTOR: 30 KW
VOLTAGE: 400 VOLT
/ 50 HZ
FREE AIR DELIVERY: 4,3 M³/MIN
MEASUREMENT (WXHXD): 1350 / 1585 / 900
WEIGHT: 590 KG
COMPRESSED AIR CONNECTION: 1¼
Vendedor: BOGE KOMPRESSOREN Otto Boge GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-vertical - cnc machining center haas vf 0e

with contouring haas
year of construction: 1998 traverse paths: x 762 y 406 z 508
speed range: 30-7,500 rpm infinitely variable with the following accessories:

solid angle table 920 mm x 355 mm clamping surface
vertical tool changer magazine 20-seat
nc dividing head haas tip height 155 mm
full cab with sliding door and interior light
electronic handwheel
spiral conveyor
coolant system
6 pcs. machine shoes
operating instructions VERTICAL - CNC MACHINING CENTER HAAS VF 0E WITH CONTOURING HAAS YEAR OF CONSTRUCTION: 1998 TRAVERSE PATHS: X 762 Y 406 Z 508 SPEED RANGE: 30-7,500 RPM INFINITELY VARIABLE WITH THE FOLLOWING ACCESSORIES: SOLID ANGLE TABLE 920 MM X 355 MM CLAMPING SURFACE VERTICAL TOOL CHANGER MAGAZINE 20-SEAT NC DIVIDING HEAD HAAS TIP HEIGHT 155 MM FULL CAB WITH SLIDING DOOR AND INTERIOR LIGHT ELECTRONIC HANDWHEEL SPIRAL CONVEYOR COOLANT SYSTEM 6 PCS. MACHINE SHOES OPERATING INSTRUCTIONS
Vendedor: Martin Beschle Werkzeuge & Maschinen GmbH
Año de construcción: usado
Precio: 2.350 
Ubicación: Land-pressure: 10 bar <br/>motor: 5,5 kw <br/>free air delivery: 0,635 m³/min <br/>measurement (wxhxd): 890 x 770 x 610 <br/>weight: 90 kg <br/> PRESSURE: 10 BAR
MOTOR: 5,5 KW
FREE AIR DELIVERY: 0,635 M³/MIN
MEASUREMENT (WXHXD): 890 X 770 X 610
WEIGHT: 90 KG
Vendedor: BOGE KOMPRESSOREN Otto Boge GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-cnc universal - milling & drilling machine lid maho dmu 80t

with contouring mill plus it
year of construction: 2001 traverse paths: x 880 y 630 z 630
speed range: 0-12.000 rpm infinitely variable with the following accessories:

solid angle table 1250 x 700 mm clamping surface
vertical tool changer with 32 magazine places (sk 40)
full cab with sliding door and interior light
electronic handwheel
measuring probe preparation (read head available)
mode 3
chip washing gun
integrated screw conveyors
coolant system
3-piece adjustable mounts
operating instructions CNC UNIVERSAL - MILLING & DRILLING MACHINE LID MAHO DMU 80T WITH CONTOURING MILL PLUS IT YEAR OF CONSTRUCTION: 2001 TRAVERSE PATHS: X 880 Y 630 Z 630 SPEED RANGE: 0-12.000 RPM INFINITELY VARIABLE WITH THE FOLLOWING ACCESSORIES: SOLID ANGLE TABLE 1250 X 700 MM CLAMPING SURFACE VERTICAL TOOL CHANGER WITH 32 MAGAZINE PLACES (SK 40) FULL CAB WITH SLIDING DOOR AND INTERIOR LIGHT ELECTRONIC HANDWHEEL MEASURING PROBE PREPARATION (READ HEAD AVAILABLE) MODE 3 CHIP WASHING GUN INTEGRATED SCREW CONVEYORS COOLANT SYSTEM 3-PIECE ADJUSTABLE MOUNTS OPERATING INSTRUCTIONS
Vendedor: Martin Beschle Werkzeuge & Maschinen GmbH
Año de construcción: usado
Precio: 6.700 
Ubicación: Land-pressure: 7,5 bar <br/>motor: 30 kw <br/>voltage: 400 volt <br/> / 50 hz <br/>free air delivery: 4,8 m³/min <br/>measurement (wxhxd): 1350 x 1585 x 900 <br/>weight: 590 kg <br/>compressed air connection: 1 1/4 <br/> PRESSURE: 7,5 BAR
MOTOR: 30 KW
VOLTAGE: 400 VOLT
/ 50 HZ
FREE AIR DELIVERY: 4,8 M³/MIN
MEASUREMENT (WXHXD): 1350 X 1585 X 900
WEIGHT: 590 KG
COMPRESSED AIR CONNECTION: 1 1/4
Vendedor: BOGE KOMPRESSOREN Otto Boge GmbH & Co.KG
Año de construcción: usado
Precio: 990 €
Ubicación: Land-circular saws feed type 76, suitable on all table and circular saw, for safe cutting of strips, planks, laminated, etc from solid wood, 3 st. drive roller 110 mm roll diameter 50 mm rollenstã¤rk, feed speed: 13 + 26 m / min., drive 0.14 kw - 380 volts, maximum workpiece height 80 mm, min. workpiece length 200 mm, weight 30 kg, top condition - made in germany CIRCULAR SAWS FEED TYPE 76, SUITABLE ON ALL TABLE AND CIRCULAR SAW, FOR SAFE CUTTING OF STRIPS, PLANKS, LAMINATED, ETC FROM SOLID WOOD, 3 ST. DRIVE ROLLER 110 MM ROLL DIAMETER 50 MM ROLLENST&ATILDE;&CURREN;RK, FEED SPEED: 13 + 26 M / MIN., DRIVE 0.14 KW - 380 VOLTS, MAXIMUM WORKPIECE HEIGHT 80 MM, MIN. WORKPIECE LENGTH 200 MM, WEIGHT 30 KG, TOP CONDITION - MADE IN GERMANY
Vendedor: voelkel-hightech
Año de construcción: usado
Precio: 895 
Ubicación: Land-pressure: 10 bar <br/>motor: 1,8 kw <br/>free air delivery: 0,18 m³/min <br/>measurement (wxhxd): 850 x 940 x 490 <br/>weight: 80 kg <br/> PRESSURE: 10 BAR
MOTOR: 1,8 KW
FREE AIR DELIVERY: 0,18 M³/MIN
MEASUREMENT (WXHXD): 850 X 940 X 490
WEIGHT: 80 KG
Vendedor: BOGE KOMPRESSOREN Otto Boge GmbH & Co.KG
Año de construcción: usado
Precio: 5.800 €
Ubicación: Land-concrete stone molds wallingstone
60x40x25cm (solid stone) plus 30x40x25cm (half stone)
used forms
good condition CONCRETE STONE MOLDS WALLINGSTONE 60X40X25CM (SOLID STONE) PLUS 30X40X25CM (HALF STONE) USED FORMS GOOD CONDITION
Vendedor: Stöcker Beton GmbH
Año de construcción: usado
Precio: 1.450 
Ubicación: Land-pressure: 10 bar <br/>motor: 4 kw <br/>voltage: 400 volt <br/> / 50 hz <br/>free air delivery: 0,52 m³/min <br/>measurement (wxhxd): 870 x 730 x 460 <br/>weight: 70 kg <br/> PRESSURE: 10 BAR
MOTOR: 4 KW
VOLTAGE: 400 VOLT
/ 50 HZ
FREE AIR DELIVERY: 0,52 M³/MIN
MEASUREMENT (WXHXD): 870 X 730 X 460
WEIGHT: 70 KG
Vendedor: BOGE KOMPRESSOREN Otto Boge GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-grinder safo 260

-machine in stock
-after reviewing the technical
-vg condition

technical parameters:

-length of workpiece 260 cm
– the workpiece width 80 cm

-motor 4 kw

-the length of the table top 260cm
-table width 80 cm

-diameter exhaust-120 mm x 2

overall dimensions:

-length of 380 cm
width 150 cm
-height 1170 cm
-weight approx. 850 kg

the grinder is intended for grinding discs, furniture and joinery, solid, high pressure, painted, etc. rough and finish depending on sanding belt used for the cutting process. GRINDER SAFO 260 -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VG CONDITION TECHNICAL PARAMETERS: -LENGTH OF WORKPIECE 260 CM – THE WORKPIECE WIDTH 80 CM -MOTOR 4 KW -THE LENGTH OF THE TABLE TOP 260CM -TABLE WIDTH 80 CM -DIAMETER EXHAUST-120 MM X 2 OVERALL DIMENSIONS: -LENGTH OF 380 CM WIDTH 150 CM -HEIGHT 1170 CM -WEIGHT APPROX. 850 KG THE GRINDER IS INTENDED FOR GRINDING DISCS, FURNITURE AND JOINERY, SOLID, HIGH PRESSURE, PAINTED, ETC. ROUGH AND FINISH DEPENDING ON SANDING BELT USED FOR THE CUTTING PROCESS.
Vendedor: StanDrew
Año de construcción: usado
Precio: 2.795 
Ubicación: Land-pressure: 13 bar <br/>motor: 5,5 kw <br/>voltage: 400 volt <br/> / 50 hz <br/>free air delivery: 0,6 m³/min <br/>measurement (wxhxd): 950 x 900 x 550 <br/>weight: 185 kg <br/>compressed air connection: ½ <br/> PRESSURE: 13 BAR
MOTOR: 5,5 KW
VOLTAGE: 400 VOLT
/ 50 HZ
FREE AIR DELIVERY: 0,6 M³/MIN
MEASUREMENT (WXHXD): 950 X 900 X 550
WEIGHT: 185 KG
COMPRESSED AIR CONNECTION: ½
Vendedor: BOGE KOMPRESSOREN Otto Boge GmbH & Co.KG
Año de construcción: usado
Precio: 4.500 €
Ubicación: Land-concrete stone molds for garden and landscape
rectangle 60x40cm solid brick, rectangular 30x40cm half stone
board size (minimum) 1400x950mm CONCRETE STONE MOLDS FOR GARDEN AND LANDSCAPE RECTANGLE 60X40CM SOLID BRICK, RECTANGULAR 30X40CM HALF STONE BOARD SIZE (MINIMUM) 1400X950MM
Vendedor: Stöcker Beton GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 1.200 €
Ubicación: Land-weight approx.: 2000 kg<br/>dimensions (l x w x h) approx.: 5000 x 1000 x 1500 mm<br/>description: single automatic edging machine for application of pvc, abs, melamine, veneer and solid wood edges in strips or rolls.<br> workpiece thickness min. /max.: 10 to 50 mm.<br> max. workpiece width: 60 mm.<br> max. workpiece length: 140 mm.<br> thickness of edge-banding material in rolls min./max.: 0,4 to 3 mm.<br> thickness of edge-banding material: 12 mm.<br> total edge height: 4 mm.<br> <br> glue pot capacity: 2,5 kg.<br> glues types: hot melt.<br> guillotine for cutting rolled banding materials.<br> double end-trimming unit.<br> top and bottom edge trimming unit.<br> tilting top and bottom chamfering unit.<br> glue scraper unit.<br> brush unit.<br> <br> documents included: operation and maintenance manual, spare parts catalogue, electrical sheet, software manual, ce declaration of conformity.<br> WEIGHT APPROX.: 2000 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 1000 X 1500 MM
DESCRIPTION: SINGLE AUTOMATIC EDGING MACHINE FOR APPLICATION OF PVC, ABS, MELAMINE, VENEER AND SOLID WOOD EDGES IN STRIPS OR ROLLS.
WORKPIECE THICKNESS MIN. /MAX.: 10 TO 50 MM.
MAX. WORKPIECE WIDTH: 60 MM.
MAX. WORKPIECE LENGTH: 140 MM.
THICKNESS OF EDGE-BANDING MATERIAL IN ROLLS MIN./MAX.: 0,4 TO 3 MM.
THICKNESS OF EDGE-BANDING MATERIAL: 12 MM.
TOTAL EDGE HEIGHT: 4 MM.

GLUE POT CAPACITY: 2,5 KG.
GLUES TYPES: HOT MELT.
GUILLOTINE FOR CUTTING ROLLED BANDING MATERIALS.
DOUBLE END-TRIMMING UNIT.
TOP AND BOTTOM EDGE TRIMMING UNIT.
TILTING TOP AND BOTTOM CHAMFERING UNIT.
GLUE SCRAPER UNIT.
BRUSH UNIT.

DOCUMENTS INCLUDED: OPERATION AND MAINTENANCE MANUAL, SPARE PARTS CATALOGUE, ELECTRICAL SHEET, SOFTWARE MANUAL, CE DECLARATION OF CONFORMITY.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-max. admission height: 30mm, admission width: 150mm, max. cable cross section cu stranded/ solid: 70/ 10mm², max. feed rate: 1m/s, compressed air supply: 6bar, length: 430mm, width: 730mm, height: 560mm, weight: 65kg.  MAX. ADMISSION HEIGHT: 30MM, ADMISSION WIDTH: 150MM, MAX. CABLE CROSS SECTION CU STRANDED/ SOLID: 70/ 10MM², MAX. FEED RATE: 1M/S, COMPRESSED AIR SUPPLY: 6BAR, LENGTH: 430MM, WIDTH: 730MM, HEIGHT: 560MM, WEIGHT: 65KG.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-make uic gmbh, type kd10-2 s, new 1999, film evaporator , extra specifications short path vacuum distillation system kd10-2 s, pilot scale, manuf. by uic gmbh , built 1999, with 2 ss evaporators type kd 10 (evaporation surface 0,1 m²) with short path distillators type kd 10, volume: vessel: 7,2 l heating room: 0,7 l, condenser: 0,5 l, pressure: -1 bar, heating room -1/7bar, condenser -1/8bar, temperatures: vessel: 350°c, heating room 350°c, condenser 250°c, with 3 x 0,2 m² cold trap , stainless steel 1.4571, 30 l jacketed stainless steel receiver, heated ss melt funnel, trivac rotary vacuum pump , ruvac roots pump made by leybold . with heated maaggear pump pump system used for solids distillation, designed with 9 individual heating/cooling devices – also available under separate sku numbersfilm evaporatorsbitterfeld-wolfendistillation > film evaporatorsbitterfeld-wolfen what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE UIC GMBH, TYPE KD10-2 S, NEW 1999, FILM EVAPORATOR , EXTRA SPECIFICATIONS SHORT PATH VACUUM DISTILLATION SYSTEM KD10-2 S, PILOT SCALE, MANUF. BY UIC GMBH , BUILT 1999, WITH 2 SS EVAPORATORS TYPE KD 10 (EVAPORATION SURFACE 0,1 M²) WITH SHORT PATH DISTILLATORS TYPE KD 10, VOLUME: VESSEL: 7,2 L HEATING ROOM: 0,7 L, CONDENSER: 0,5 L, PRESSURE: -1 BAR, HEATING ROOM -1/7BAR, CONDENSER -1/8BAR, TEMPERATURES: VESSEL: 350°C, HEATING ROOM 350°C, CONDENSER 250°C, WITH 3 X 0,2 M² COLD TRAP , STAINLESS STEEL 1.4571, 30 L JACKETED STAINLESS STEEL RECEIVER, HEATED SS MELT FUNNEL, TRIVAC ROTARY VACUUM PUMP , RUVAC ROOTS PUMP MADE BY LEYBOLD . WITH HEATED MAAGGEAR PUMP PUMP SYSTEM USED FOR SOLIDS DISTILLATION, DESIGNED WITH 9 INDIVIDUAL HEATING/COOLING DEVICES – ALSO AVAILABLE UNDER SEPARATE SKU NUMBERSFILM EVAPORATORSBITTERFELD-WOLFENDISTILLATION > FILM EVAPORATORSBITTERFELD-WOLFEN WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land--machine in stock
-after reviewing the technical

technical parameters:

-saw motor 7.5 kw
-number of revolutions 3200 u/min.
-the engine feed 3.5 kw

– roller table 1200 right inlet mm
-left outlet table 1000 mm

-infinitely variable feed rate of 100 m/min-300 ft/min
-roll with nap?d?m milled in the table dolonym pack 7
-rollers pressed pneumatically from the top of the pack. 6

-cutting speed to 120 takte/min.
– saw blade Ø 455 x 30 mm

-cutting height max. 100 mm
– max. cutting width 270 mm

-high cutting accuracy +-0.1 mm
-min. length material 300 mm
-min. distance from the markup of 20 mm
-min. dimensions 300 x 30 x 10 mm

-plc control with touch-screen
-cut solid dimensions
-cutting of different lengths of 40 different dimensions
-cuts/placemarks
-fixed cutting length. by rep. miejscac

-required air pressure 8 bar
-weight 850 kg
-year of manufacture 2007

dimensions:

-length: 3280 mm
-width 1170 mm
-height 1400 mm -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL TECHNICAL PARAMETERS: -SAW MOTOR 7.5 KW -NUMBER OF REVOLUTIONS 3200 U/MIN. -THE ENGINE FEED 3.5 KW – ROLLER TABLE 1200 RIGHT INLET MM -LEFT OUTLET TABLE 1000 MM -INFINITELY VARIABLE FEED RATE OF 100 M/MIN-300 FT/MIN -ROLL WITH NAP?D?M MILLED IN THE TABLE DOLONYM PACK 7 -ROLLERS PRESSED PNEUMATICALLY FROM THE TOP OF THE PACK. 6 -CUTTING SPEED TO 120 TAKTE/MIN. – SAW BLADE Ø 455 X 30 MM -CUTTING HEIGHT MAX. 100 MM – MAX. CUTTING WIDTH 270 MM -HIGH CUTTING ACCURACY +-0.1 MM -MIN. LENGTH MATERIAL 300 MM -MIN. DISTANCE FROM THE MARKUP OF 20 MM -MIN. DIMENSIONS 300 X 30 X 10 MM -PLC CONTROL WITH TOUCH-SCREEN -CUT SOLID DIMENSIONS -CUTTING OF DIFFERENT LENGTHS OF 40 DIFFERENT DIMENSIONS -CUTS/PLACEMARKS -FIXED CUTTING LENGTH. BY REP. MIEJSCAC -REQUIRED AIR PRESSURE 8 BAR -WEIGHT 850 KG -YEAR OF MANUFACTURE 2007 DIMENSIONS: -LENGTH: 3280 MM -WIDTH 1170 MM -HEIGHT 1400 MM
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-amtec fillingmachine fully automatic 2-line sensor counter l<br><br>this machine is suitable for counting of candies, biscuits, nuts, vegetables, plant bulbs, and most solid granules. the counter is equipped with dust resistance photoelectric detection technology, multi detection and alarm control functions. the 2 tunnels belt feeding device ensures an evenly feeding and no breakage of products. the structure and design of the filling hopper prevents that the products getting jammed. control via touch screen interface, menu in english available. -specifications: number of feeding tracks: 2 | capacity: according to customers samples, containers and filling quantity | working range: adjustable from 2-9999 per container | product sizes: min. Ø 10mm, max. Ø 60mm | large infeed hopper | compressed air: 6bar | power: 220v, 0.6-1.7kw | machine dimensions: lxwxh customized. the image shows the 8-line version.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FILLINGMACHINE FULLY AUTOMATIC 2-LINE SENSOR COUNTER L

THIS MACHINE IS SUITABLE FOR COUNTING OF CANDIES, BISCUITS, NUTS, VEGETABLES, PLANT BULBS, AND MOST SOLID GRANULES. THE COUNTER IS EQUIPPED WITH DUST RESISTANCE PHOTOELECTRIC DETECTION TECHNOLOGY, MULTI DETECTION AND ALARM CONTROL FUNCTIONS. THE 2 TUNNELS BELT FEEDING DEVICE ENSURES AN EVENLY FEEDING AND NO BREAKAGE OF PRODUCTS. THE STRUCTURE AND DESIGN OF THE FILLING HOPPER PREVENTS THAT THE PRODUCTS GETTING JAMMED. CONTROL VIA TOUCH SCREEN INTERFACE, MENU IN ENGLISH AVAILABLE. -SPECIFICATIONS: NUMBER OF FEEDING TRACKS: 2 | CAPACITY: ACCORDING TO CUSTOMERS SAMPLES, CONTAINERS AND FILLING QUANTITY | WORKING RANGE: ADJUSTABLE FROM 2-9999 PER CONTAINER | PRODUCT SIZES: MIN. Ø 10MM, MAX. Ø 60MM | LARGE INFEED HOPPER | COMPRESSED AIR: 6BAR | POWER: 220V, 0.6-1.7KW | MACHINE DIMENSIONS: LXWXH CUSTOMIZED. THE IMAGE SHOWS THE 8-LINE VERSION.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Precio: 4.800 €
Ubicación: Land-code: 0359
brand: sbf  ing stefani
model: rr 970

automatic wide belt sander with 2 belts  ( roller  + roller )  for solid wood, veneer. panels , thin strips of wood, and various materials
technical data:

working width  mm 970
1° group  rubber calibrating roller diameter mm 140
2° group  rubber sanding   roller diameter mm 140 
belt size  mm 1900 x 940
motor  hp10
automatic table lifting
electronic position indicator
automatic table positioning
belt feed  with 2 speeds 
infeed and outfeed roller conveyor 
overall dimensions:  mm 1600 x 1500 x 2200  h


  CODE: 0359 BRAND: SBF ING STEFANI MODEL: RR 970 AUTOMATIC WIDE BELT SANDER WITH 2 BELTS ( ROLLER + ROLLER ) FOR SOLID WOOD, VENEER. PANELS , THIN STRIPS OF WOOD, AND VARIOUS MATERIALS TECHNICAL DATA: WORKING WIDTH MM 970 1° GROUP RUBBER CALIBRATING ROLLER DIAMETER MM 140 2° GROUP RUBBER SANDING ROLLER DIAMETER MM 140 BELT SIZE MM 1900 X 940 MOTOR HP10 AUTOMATIC TABLE LIFTING ELECTRONIC POSITION INDICATOR AUTOMATIC TABLE POSITIONING BELT FEED WITH 2 SPEEDS INFEED AND OUTFEED ROLLER CONVEYOR OVERALL DIMENSIONS: MM 1600 X 1500 X 2200 H
Vendedor: TOMESANI Srl
Año de construcción: usado
Ubicación: Land-amtec fillingmachine fully automatic 4-line sensor counter l<br><br>this machine is suitable for counting of candies, biscuits, nuts, vegetables, plant bulbs, and most solid granules. the counter is equipped with dust resistance photoelectric detection technology, multi detection and alarm control functions. the 4 tunnels belt feeding device ensures an evenly feeding and no breakage of products. the structure and design of the filling hopper prevents that the products getting jammed. control via touch screen interface, menu in english available. <br><br>- specifications: number of feeding tracks: 4 | capacity: according to customers samples, containers and filling quantity | working range: adjustable from 2-9999 per container | product sizes: min. Ø 10mm, max. Ø 60mm | large infeed hopper | compressed air: 6bar | power: 220v, 0.6-1.7kw | machine dimensions: lxwxh customized. the image shows the 8-line version.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FILLINGMACHINE FULLY AUTOMATIC 4-LINE SENSOR COUNTER L

THIS MACHINE IS SUITABLE FOR COUNTING OF CANDIES, BISCUITS, NUTS, VEGETABLES, PLANT BULBS, AND MOST SOLID GRANULES. THE COUNTER IS EQUIPPED WITH DUST RESISTANCE PHOTOELECTRIC DETECTION TECHNOLOGY, MULTI DETECTION AND ALARM CONTROL FUNCTIONS. THE 4 TUNNELS BELT FEEDING DEVICE ENSURES AN EVENLY FEEDING AND NO BREAKAGE OF PRODUCTS. THE STRUCTURE AND DESIGN OF THE FILLING HOPPER PREVENTS THAT THE PRODUCTS GETTING JAMMED. CONTROL VIA TOUCH SCREEN INTERFACE, MENU IN ENGLISH AVAILABLE.

- SPECIFICATIONS: NUMBER OF FEEDING TRACKS: 4 | CAPACITY: ACCORDING TO CUSTOMERS SAMPLES, CONTAINERS AND FILLING QUANTITY | WORKING RANGE: ADJUSTABLE FROM 2-9999 PER CONTAINER | PRODUCT SIZES: MIN. Ø 10MM, MAX. Ø 60MM | LARGE INFEED HOPPER | COMPRESSED AIR: 6BAR | POWER: 220V, 0.6-1.7KW | MACHINE DIMENSIONS: LXWXH CUSTOMIZED. THE IMAGE SHOWS THE 8-LINE VERSION.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-
edge bander scm holzkraft me 35 preliminary milling

easy to use with all optional equipment: edge bander me 35, oklejaniem corners, also with oklejaniem solid wood strips to a thickness of 5 mm, it offers the best performance in okleiniarkach at this level.

these features, combined ease of use make me 35 the ideal machine for the companies manufacturing furniture.

advantages:

panel system: designed for a perfect finish. the best finish is guaranteed by a team move, which prevents the influence of feed rate on the covering, ensuring smooth movement of the disc.

an adhesive:

excellent performance when used with all types of wood. allows you to stick panels heights from 8 to 50 mm: a true record in its category!

high-frequency motors:

maximum reliability and accuracy. these motors provide the optimal level of trim. in addition, the lack of tape or other conventional propulsion systems prevents the effect of vibration on the quality of the finish.

access to all units.

precise and easy to use: one hand wheel with a numeric readout raises and leaves the pressure by allowing the automatic positioning of operating units depending on the thickness of the plate.

pre-milling unit (diamond cutter)
    power cutting front
    glue unit
    indexing roller team
    cutting unit 2 balls
    top-down milling unit
    unit radial scraper planes
    electrical adhesive scraper planes

manufacturer: holzkraft
technical data
veneer thickness 0.4-3 mm
max. the thickness of the veneer (tape) 5 mm
min. ÷ max. the height of the panel 8 ÷ 50 mm
min length/width panel 190/110 mm
feed speed 7 m/min
weight 540 kg EDGE BANDER SCM HOLZKRAFT ME 35 PRELIMINARY MILLING EASY TO USE WITH ALL OPTIONAL EQUIPMENT: EDGE BANDER ME 35, OKLEJANIEM CORNERS, ALSO WITH OKLEJANIEM SOLID WOOD STRIPS TO A THICKNESS OF 5 MM, IT OFFERS THE BEST PERFORMANCE IN OKLEINIARKACH AT THIS LEVEL. THESE FEATURES, COMBINED EASE OF USE MAKE ME 35 THE IDEAL MACHINE FOR THE COMPANIES MANUFACTURING FURNITURE. ADVANTAGES: PANEL SYSTEM: DESIGNED FOR A PERFECT FINISH. THE BEST FINISH IS GUARANTEED BY A TEAM MOVE, WHICH PREVENTS THE INFLUENCE OF FEED RATE ON THE COVERING, ENSURING SMOOTH MOVEMENT OF THE DISC. AN ADHESIVE: EXCELLENT PERFORMANCE WHEN USED WITH ALL TYPES OF WOOD. ALLOWS YOU TO STICK PANELS HEIGHTS FROM 8 TO 50 MM: A TRUE RECORD IN ITS CATEGORY! HIGH-FREQUENCY MOTORS: MAXIMUM RELIABILITY AND ACCURACY. THESE MOTORS PROVIDE THE OPTIMAL LEVEL OF TRIM. IN ADDITION, THE LACK OF TAPE OR OTHER CONVENTIONAL PROPULSION SYSTEMS PREVENTS THE EFFECT OF VIBRATION ON THE QUALITY OF THE FINISH. ACCESS TO ALL UNITS. PRECISE AND EASY TO USE: ONE HAND WHEEL WITH A NUMERIC READOUT RAISES AND LEAVES THE PRESSURE BY ALLOWING THE AUTOMATIC POSITIONING OF OPERATING UNITS DEPENDING ON THE THICKNESS OF THE PLATE. PRE-MILLING UNIT (DIAMOND CUTTER) POWER CUTTING FRONT GLUE UNIT INDEXING ROLLER TEAM CUTTING UNIT 2 BALLS TOP-DOWN MILLING UNIT UNIT RADIAL SCRAPER PLANES ELECTRICAL ADHESIVE SCRAPER PLANES MANUFACTURER: HOLZKRAFT TECHNICAL DATA VENEER THICKNESS 0.4-3 MM MAX. THE THICKNESS OF THE VENEER (TAPE) 5 MM MIN. ÷ MAX. THE HEIGHT OF THE PANEL 8 ÷ 50 MM MIN LENGTH/WIDTH PANEL 190/110 MM FEED SPEED 7 M/MIN WEIGHT 540 KG
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-amtec fillingmachine fully automatic 8-line sensor counter l<br><br>this machine is suitable for counting of candies, biscuits, nuts, vegetables, plant bulbs, and most solid granules. the counter is equipped with dust resistance photoelectric detection technology, multi detection and alarm control functions. the 8 tunnels belt feeding device ensures an evenly feeding and no breakage of products. the structure and design of the filling hopper prevents that the products getting jammed. control via touch screen interface, menu in english available. <br><br>- specifications: number of feeding tracks: 8 | capacity: according to customers samples, containers and filling quantity | working range: adjustable from 2-9999 per container | product sizes: min. Ø 10mm, max. Ø 60mm | large infeed hopper | compressed air: 6bar | power: 220v, 0.6-1.7kw | machine dimensions lxwxh: customized | weight: approx. 550kg.<br><br>that machine/system is available in different versions for different packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FILLINGMACHINE FULLY AUTOMATIC 8-LINE SENSOR COUNTER L

THIS MACHINE IS SUITABLE FOR COUNTING OF CANDIES, BISCUITS, NUTS, VEGETABLES, PLANT BULBS, AND MOST SOLID GRANULES. THE COUNTER IS EQUIPPED WITH DUST RESISTANCE PHOTOELECTRIC DETECTION TECHNOLOGY, MULTI DETECTION AND ALARM CONTROL FUNCTIONS. THE 8 TUNNELS BELT FEEDING DEVICE ENSURES AN EVENLY FEEDING AND NO BREAKAGE OF PRODUCTS. THE STRUCTURE AND DESIGN OF THE FILLING HOPPER PREVENTS THAT THE PRODUCTS GETTING JAMMED. CONTROL VIA TOUCH SCREEN INTERFACE, MENU IN ENGLISH AVAILABLE.

- SPECIFICATIONS: NUMBER OF FEEDING TRACKS: 8 | CAPACITY: ACCORDING TO CUSTOMERS SAMPLES, CONTAINERS AND FILLING QUANTITY | WORKING RANGE: ADJUSTABLE FROM 2-9999 PER CONTAINER | PRODUCT SIZES: MIN. Ø 10MM, MAX. Ø 60MM | LARGE INFEED HOPPER | COMPRESSED AIR: 6BAR | POWER: 220V, 0.6-1.7KW | MACHINE DIMENSIONS LXWXH: CUSTOMIZED | WEIGHT: APPROX. 550KG.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Precio: 265 €
Ubicación: Land-spindle bearings â· b71911-e-t-p4s-ul
it is a set of 2 pieces,
because these bearings for paired mounting
intended to perform.

b71911 - e-t-p4s-ul
tolerance: tolerance class p4
contact angle: 25 â° c
outer shape: for paired mounting, o or x arrangement light preload
cage: hard tissue cage solid
cage: cage outside board led s0vlu3g88
hochgenauigkeits bearing, ball bearing, angular contact ball bearings SPINDLE BEARINGS &ACIRC;&MIDDOT; B71911-E-T-P4S-UL IT IS A SET OF 2 PIECES, BECAUSE THESE BEARINGS FOR PAIRED MOUNTING INTENDED TO PERFORM. B71911 - E-T-P4S-UL TOLERANCE: TOLERANCE CLASS P4 CONTACT ANGLE: 25 &ACIRC;&DEG; C OUTER SHAPE: FOR PAIRED MOUNTING, O OR X ARRANGEMENT LIGHT PRELOAD CAGE: HARD TISSUE CAGE SOLID CAGE: CAGE OUTSIDE BOARD LED S0VLU3G88 HOCHGENAUIGKEITS BEARING, BALL BEARING, ANGULAR CONTACT BALL BEARINGS
Vendedor: EN-Tec GmbH
Año de construcción: usado
Ubicación: Land-amtec fillingmachine fully automatic 8-line sensor counter s<br><br>this machine is suitable for counting of candies, biscuits, nuts, vegetables, plant bulbs, and most solid granules. the counter is equipped with dust resistance photoelectric detection technology and multi detection and alarm control functions. the 8 tunnels vibration feeding device ensures an evenly feeding and no breakage of product. the structure and design of the filling hopper prevents that the products getting jammed. control via touch screen interface, menu in english available. <br><br>- specifications: number of vibrating tracks: 8 | capacity: according to customers samples, containers and filling quantity | working range: adjustable from 2-9999 per container | product sizes: min. Ø 5.5mm, max. Ø 38.5mm | large infeed hopper | compressed air: 6bar | power: 220v, 0.6-1.7kw | all the parts in contact with the product are made of stainless steel 316, other made of stainless steel 304 | machine dimensions lxwxh: customized | weight: approx. 350kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FILLINGMACHINE FULLY AUTOMATIC 8-LINE SENSOR COUNTER S

THIS MACHINE IS SUITABLE FOR COUNTING OF CANDIES, BISCUITS, NUTS, VEGETABLES, PLANT BULBS, AND MOST SOLID GRANULES. THE COUNTER IS EQUIPPED WITH DUST RESISTANCE PHOTOELECTRIC DETECTION TECHNOLOGY AND MULTI DETECTION AND ALARM CONTROL FUNCTIONS. THE 8 TUNNELS VIBRATION FEEDING DEVICE ENSURES AN EVENLY FEEDING AND NO BREAKAGE OF PRODUCT. THE STRUCTURE AND DESIGN OF THE FILLING HOPPER PREVENTS THAT THE PRODUCTS GETTING JAMMED. CONTROL VIA TOUCH SCREEN INTERFACE, MENU IN ENGLISH AVAILABLE.

- SPECIFICATIONS: NUMBER OF VIBRATING TRACKS: 8 | CAPACITY: ACCORDING TO CUSTOMERS SAMPLES, CONTAINERS AND FILLING QUANTITY | WORKING RANGE: ADJUSTABLE FROM 2-9999 PER CONTAINER | PRODUCT SIZES: MIN. Ø 5.5MM, MAX. Ø 38.5MM | LARGE INFEED HOPPER | COMPRESSED AIR: 6BAR | POWER: 220V, 0.6-1.7KW | ALL THE PARTS IN CONTACT WITH THE PRODUCT ARE MADE OF STAINLESS STEEL 316, OTHER MADE OF STAINLESS STEEL 304 | MACHINE DIMENSIONS LXWXH: CUSTOMIZED | WEIGHT: APPROX. 350KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Precio: 8.995 €
Ubicación: Land-forwarding cnc tool machine maho sales only at commercial cnc tool machine maho type mh 600 e2 masch. no. 660576 cnc railway control of philips 432 driveways x: 600 mm y: 400 mm z 450 mm tischgrã¶ã?e900 x 480 mm werkzeugwechsler20 fold spindle taper iso 40 din 69871 with pull stud din 7388/ii tool clamp hydraulic spindle speed 20-4000 rpm. 
infinitely programmable feed 1-4000 mm / min. 
continuously rapid traverse x and z = 6 m / min, y = 5 m / min. 
pinolverschiebung vertikal80 mm spindelantrieb5, 5 kw netzanschluã?380 volt, 50 hz, 12 kva - solid angle table splash guard cabin as table housing with 3 folding doors swivel mechanism for the vertical milling head - v24 interface for data transmission -. 
tiltable control panel coolant system with coolant pump central oil lubrication bird 26126 operating hours
documentation FORWARDING CNC TOOL MACHINE MAHO SALES ONLY AT COMMERCIAL CNC TOOL MACHINE MAHO TYPE MH 600 E2 MASCH. NO. 660576 CNC RAILWAY CONTROL OF PHILIPS 432 DRIVEWAYS X: 600 MM Y: 400 MM Z 450 MM TISCHGR&ATILDE;&PARA;&ATILDE;?E900 X 480 MM WERKZEUGWECHSLER20 FOLD SPINDLE TAPER ISO 40 DIN 69871 WITH PULL STUD DIN 7388/II TOOL CLAMP HYDRAULIC SPINDLE SPEED 20-4000 RPM. INFINITELY PROGRAMMABLE FEED 1-4000 MM / MIN. CONTINUOUSLY RAPID TRAVERSE X AND Z = 6 M / MIN, Y = 5 M / MIN. PINOLVERSCHIEBUNG VERTIKAL80 MM SPINDELANTRIEB5, 5 KW NETZANSCHLU&ATILDE;?380 VOLT, 50 HZ, 12 KVA - SOLID ANGLE TABLE SPLASH GUARD CABIN AS TABLE HOUSING WITH 3 FOLDING DOORS SWIVEL MECHANISM FOR THE VERTICAL MILLING HEAD - V24 INTERFACE FOR DATA TRANSMISSION -. TILTABLE CONTROL PANEL COOLANT SYSTEM WITH COOLANT PUMP CENTRAL OIL LUBRICATION BIRD 26126 OPERATING HOURS DOCUMENTATION
Vendedor: EN-Tec GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 11330 kg<br/>dimensions (l x w x h) approx.: 7120 x 2390 x 3210 mm<br/>description: <h3><b>volvo l70d wheel loader with solid rubber wheels</b></h3> <br> <h3>transmission</h3> - transmission type: volvo ht 90<br> - number of forward gears: 4<br> - number of reverse gears: 4<br> - max. forward speed: 43.9 km/h<br> - max. reverse speed: 43.9 km/h<br> <br> <h3>shovel</h3> - breakaway torque: 19540 pounds<br> - discharge floor clearance at max. delivery height: 2880 mm<br> - width of shovel: 2500 mm<br> - bucket capacity heaped: 1.9 m3<br> <br> <h3>engine</h3> - manufacturer: volvo<br> - model: td 63 kge<br> - effective power: 91 kw<br> - total power: 95.4 kw<br> - power measured at: 2200 rpm<br> - cubic capacity: 5.5 l<br> - torque measured at: 1100 rpm<br> - max. torque: 595 nm<br> - number of cylinders: 6<br> - suction: turbocharger with intercooler<br> <br> <h3>dimensions</h3> - length with shovel at ground level: 7120 mm<br> - width between tires: 2390 mm<br> - height to upper part of cabin: 3210 mm<br> - ground clearance: 430 mm<br> - wheelbase: 2840 mm<br> - max. height of the joint axis: 3880 mm<br> - projection at max. lifting height and unloading: 960 mm<br> <br> <h3>hydraulic system</h3> - pump type: two axial piston pumps<br> - pressure of overflow valve: 26000.1 kpa<br> - flow capacity of the pump: 160.1 l/min<br> - lifting time: 5.4 sec<br> - discharge time: 1.1 sec<br> - setback time: 3 sec<br> <br> <h3>operation</h3> - operating weight: 11330.7 kg<br> - fuel volume: 190 l<br> - fluid volume of the hydraulic system: 65 l<br> - engine oil volume: 16 l<br> - liquid volume of the cooling system: 40 l<br> - fluid volume of the transmission: 17 l<br> - fluid volume of the front axle/differential: 24 l<br> - fluid volume of the rear axle/differential: 24 l<br> - static tipping weight: 8731.7 kg<br> - swivel radius: 5565 mm<br> - working voltage: 24 v<br> - generator current power: 60 ampere<br> - pendulum travel of the rear axle: 26 degrees<br> WEIGHT APPROX.: 11330 KG
DIMENSIONS (L X W X H) APPROX.: 7120 X 2390 X 3210 MM
DESCRIPTION:

VOLVO L70D WHEEL LOADER WITH SOLID RUBBER WHEELS


TRANSMISSION

- TRANSMISSION TYPE: VOLVO HT 90
- NUMBER OF FORWARD GEARS: 4
- NUMBER OF REVERSE GEARS: 4
- MAX. FORWARD SPEED: 43.9 KM/H
- MAX. REVERSE SPEED: 43.9 KM/H

SHOVEL

- BREAKAWAY TORQUE: 19540 POUNDS
- DISCHARGE FLOOR CLEARANCE AT MAX. DELIVERY HEIGHT: 2880 MM
- WIDTH OF SHOVEL: 2500 MM
- BUCKET CAPACITY HEAPED: 1.9 M3

ENGINE

- MANUFACTURER: VOLVO
- MODEL: TD 63 KGE
- EFFECTIVE POWER: 91 KW
- TOTAL POWER: 95.4 KW
- POWER MEASURED AT: 2200 RPM
- CUBIC CAPACITY: 5.5 L
- TORQUE MEASURED AT: 1100 RPM
- MAX. TORQUE: 595 NM
- NUMBER OF CYLINDERS: 6
- SUCTION: TURBOCHARGER WITH INTERCOOLER

DIMENSIONS

- LENGTH WITH SHOVEL AT GROUND LEVEL: 7120 MM
- WIDTH BETWEEN TIRES: 2390 MM
- HEIGHT TO UPPER PART OF CABIN: 3210 MM
- GROUND CLEARANCE: 430 MM
- WHEELBASE: 2840 MM
- MAX. HEIGHT OF THE JOINT AXIS: 3880 MM
- PROJECTION AT MAX. LIFTING HEIGHT AND UNLOADING: 960 MM

HYDRAULIC SYSTEM

- PUMP TYPE: TWO AXIAL PISTON PUMPS
- PRESSURE OF OVERFLOW VALVE: 26000.1 KPA
- FLOW CAPACITY OF THE PUMP: 160.1 L/MIN
- LIFTING TIME: 5.4 SEC
- DISCHARGE TIME: 1.1 SEC
- SETBACK TIME: 3 SEC

OPERATION

- OPERATING WEIGHT: 11330.7 KG
- FUEL VOLUME: 190 L
- FLUID VOLUME OF THE HYDRAULIC SYSTEM: 65 L
- ENGINE OIL VOLUME: 16 L
- LIQUID VOLUME OF THE COOLING SYSTEM: 40 L
- FLUID VOLUME OF THE TRANSMISSION: 17 L
- FLUID VOLUME OF THE FRONT AXLE/DIFFERENTIAL: 24 L
- FLUID VOLUME OF THE REAR AXLE/DIFFERENTIAL: 24 L
- STATIC TIPPING WEIGHT: 8731.7 KG
- SWIVEL RADIUS: 5565 MM
- WORKING VOLTAGE: 24 V
- GENERATOR CURRENT POWER: 60 AMPERE
- PENDULUM TRAVEL OF THE REAR AXLE: 26 DEGREES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-universal tool milling machine manufacturer: klopp-werke korrad
 type: uw1

technical data:

x 700 mm
 y axis 350 mm
 z axis 400 mm
 pivotable milling head
 2 x 45 degree
 spindle retainer for sk 4
 2-axis digital display
 beh0jrdo07
 pilonenverstellung 0-70 mm
 2 milling spindles horizontal and vertical
 2 tables, a swivel 700 x 330 mm and a solid 700x260mm

spindle drive motor:
 1.5/2,6 kw

horizontal and vertical table slide:
 835 x 200 mm clamping surface
 number of auspann grooves 4
 smallest and largest distance from lower edge of the top of the vertical milling head, rigid angle 50-455 mm

movement spindles:
 table horizontal movement 1 turn of the scale disc 4 mm

pivot table:
 auspannflã¤che 330x700mm
 7 t-slots UNIVERSAL TOOL MILLING MACHINE MANUFACTURER: KLOPP-WERKE KORRAD TYPE: UW1 TECHNICAL DATA: X 700 MM Y AXIS 350 MM Z AXIS 400 MM PIVOTABLE MILLING HEAD 2 X 45 DEGREE SPINDLE RETAINER FOR SK 4 2-AXIS DIGITAL DISPLAY BEH0JRDO07 PILONENVERSTELLUNG 0-70 MM 2 MILLING SPINDLES HORIZONTAL AND VERTICAL 2 TABLES, A SWIVEL 700 X 330 MM AND A SOLID 700X260MM SPINDLE DRIVE MOTOR: 1.5/2,6 KW HORIZONTAL AND VERTICAL TABLE SLIDE: 835 X 200 MM CLAMPING SURFACE NUMBER OF AUSPANN GROOVES 4 SMALLEST AND LARGEST DISTANCE FROM LOWER EDGE OF THE TOP OF THE VERTICAL MILLING HEAD, RIGID ANGLE 50-455 MM MOVEMENT SPINDLES: TABLE HORIZONTAL MOVEMENT 1 TURN OF THE SCALE DISC 4 MM PIVOT TABLE: AUSPANNFL&ATILDE;&CURREN;CHE 330X700MM 7 T-SLOTS
Vendedor: RM-Industrieservice Lager und Büro
Año de construcción: usado
Ubicación: Land-new hot press, hydraulically\r\nbrand: italpresse \r\ntype xl/6 30-13 pe\r\n\r\n- electrical - heating plates: 3000 x 1300 mm \r\n- total pressure: 120 to. \r\n- number of hot plates: 2 pc. \r\n- number of floors: 1 pc. \r\n- stroke: 350 mm \r\n- day light opening: 350 mm \r\n- all-round feeding \r\n- number of cylinders: 6 pc. \r\n- diameter of cylinder: 85 mm \r\n- power consumption (hydraulic unit): 3 kw\r\n- electric hot plates of solid hard aluminium with installed heating elements \r\n- heating power 22 kw \r\n- high pressure isolation plates  \r\n- operating temperature: 90° c. \r\n- max. temperature: 120° c. \r\n- supply: 400v/50 hz \r\n- safety accordance with ce standard \r\n\r\nstandard equipment:\r\n- movement of the press table with rack and pinion parallel guidance at two corners of the press table made from self-lubricating material \r\n- electronic control unit for controlling and monitoring the machine \r\n- digital timer for setting the pressing time and automatic opening \r\n- digital input and monitoring of the pressing pressure \r\n- timer for programming the starting time of heater\r\n- digital display of diagnosis and fault messages \r\n- safety circuit with two-hand control \r\n- emergency strip wire \r\n- safety holder for the lower press table \r\n\r\noptional for an extra charge:\r\n- opening / cylinder stroke 600 mm \r\n- electrical inactivation of the left cylinder bank \r\n- additional charge for ?gold-anodised? heating plates\r\n NEW HOT PRESS, HYDRAULICALLY\R\NBRAND: ITALPRESSE \R\NTYPE XL/6 30-13 PE\R\N\R\N- ELECTRICAL - HEATING PLATES: 3000 X 1300 MM \R\N- TOTAL PRESSURE: 120 TO. \R\N- NUMBER OF HOT PLATES: 2 PC. \R\N- NUMBER OF FLOORS: 1 PC. \R\N- STROKE: 350 MM \R\N- DAY LIGHT OPENING: 350 MM \R\N- ALL-ROUND FEEDING \R\N- NUMBER OF CYLINDERS: 6 PC. \R\N- DIAMETER OF CYLINDER: 85 MM \R\N- POWER CONSUMPTION (HYDRAULIC UNIT): 3 KW\R\N- ELECTRIC HOT PLATES OF SOLID HARD ALUMINIUM WITH INSTALLED HEATING ELEMENTS \R\N- HEATING POWER 22 KW \R\N- HIGH PRESSURE ISOLATION PLATES \R\N- OPERATING TEMPERATURE: 90° C. \R\N- MAX. TEMPERATURE: 120° C. \R\N- SUPPLY: 400V/50 HZ \R\N- SAFETY ACCORDANCE WITH CE STANDARD \R\N\R\NSTANDARD EQUIPMENT:\R\N- MOVEMENT OF THE PRESS TABLE WITH RACK AND PINION PARALLEL GUIDANCE AT TWO CORNERS OF THE PRESS TABLE MADE FROM SELF-LUBRICATING MATERIAL \R\N- ELECTRONIC CONTROL UNIT FOR CONTROLLING AND MONITORING THE MACHINE \R\N- DIGITAL TIMER FOR SETTING THE PRESSING TIME AND AUTOMATIC OPENING \R\N- DIGITAL INPUT AND MONITORING OF THE PRESSING PRESSURE \R\N- TIMER FOR PROGRAMMING THE STARTING TIME OF HEATER\R\N- DIGITAL DISPLAY OF DIAGNOSIS AND FAULT MESSAGES \R\N- SAFETY CIRCUIT WITH TWO-HAND CONTROL \R\N- EMERGENCY STRIP WIRE \R\N- SAFETY HOLDER FOR THE LOWER PRESS TABLE \R\N\R\NOPTIONAL FOR AN EXTRA CHARGE:\R\N- OPENING / CYLINDER STROKE 600 MM \R\N- ELECTRICAL INACTIVATION OF THE LEFT CYLINDER BANK \R\N- ADDITIONAL CHARGE FOR ?GOLD-ANODISED? HEATING PLATES\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 1.500 €
Ubicación: Land-30 litre - 400 volts
solid cast steel (painted)
easily removable kneading bowl
with guards and safety device to lower the kneading bowl.

⧠speed

dimensions: 700 x 620 x 1200mm

dough capacity: 10kg
steel gear
motor with air vents
maximum power consumption: 1,5 kw
electr. supply: 400 v / 50 hz
weight: 180 kg

stand up move to the lighter roles

accessories: dough slide, dough hook, whisk

pickup / vat excl. 30 LITRE - 400 VOLTS SOLID CAST STEEL (PAINTED) EASILY REMOVABLE KNEADING BOWL WITH GUARDS AND SAFETY DEVICE TO LOWER THE KNEADING BOWL. &ACIRC;&SECT; SPEED DIMENSIONS: 700 X 620 X 1200MM DOUGH CAPACITY: 10KG STEEL GEAR MOTOR WITH AIR VENTS MAXIMUM POWER CONSUMPTION: 1,5 KW ELECTR. SUPPLY: 400 V / 50 HZ WEIGHT: 180 KG STAND UP MOVE TO THE LIGHTER ROLES ACCESSORIES: DOUGH SLIDE, DOUGH HOOK, WHISK PICKUP / VAT EXCL.
Vendedor: Presenta Deutschland GmbH
Año de construcción: usado
Ubicación: Land-make unknown (manufacturer tag is missing), floorspace 0,8x0,5 m, total height 1,7 m, cyclone (1x), material stainless steel , diameter 500mm, cylindrical height 500mm, conical height 750mm, dished top , inlet dia. 50mm, air outlet dia. 50mm, solids outlet dia. 100mmcyclonesdust separators > cyclones what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE UNKNOWN (MANUFACTURER TAG IS MISSING), FLOORSPACE 0,8X0,5 M, TOTAL HEIGHT 1,7 M, CYCLONE (1X), MATERIAL STAINLESS STEEL , DIAMETER 500MM, CYLINDRICAL HEIGHT 500MM, CONICAL HEIGHT 750MM, DISHED TOP , INLET DIA. 50MM, AIR OUTLET DIA. 50MM, SOLIDS OUTLET DIA. 100MMCYCLONESDUST SEPARATORS > CYCLONES WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more SOLID types: