18 ofertas

Año de construcción: usado
Precio: 29 €
Ubicación: Land-europrop 20-350 eco, galv., new
low dead weight allows for speedy work and conserves energy

prop retains its value for many years thanks to high-quality production and galvanisation

reliability in many applications due to high load capacity up to 36.7 kn

optimised thread pitch allows for quick and safe release of fixed prop

safe working conditions thanks to handtrapprevention and anti-drop-out latch

certificated en 1965, produced in europe.

 EUROPROP 20-350 ECO, GALV., NEW LOW DEAD WEIGHT ALLOWS FOR SPEEDY WORK AND CONSERVES ENERGY PROP RETAINS ITS VALUE FOR MANY YEARS THANKS TO HIGH-QUALITY PRODUCTION AND GALVANISATION RELIABILITY IN MANY APPLICATIONS DUE TO HIGH LOAD CAPACITY UP TO 36.7 KN OPTIMISED THREAD PITCH ALLOWS FOR QUICK AND SAFE RELEASE OF FIXED PROP SAFE WORKING CONDITIONS THANKS TO HANDTRAPPREVENTION AND ANTI-DROP-OUT LATCH CERTIFICATED EN 1965, PRODUCED IN EUROPE.
Vendedor: Berger International
Año de construcción: usado
Ubicación: Land-manufacturer: hess, type: speedy, year: 1995, min.-max. workpiece length in mm: 3.050, min.-max. workpiece height in mm: ca 2.200, working widht max mm: 600, hydraulical/pneumatical: hydraulisch, high / low pressure: hochdruck, cylinder vertical: 3, cylinder horizontally: 2, free text: automatisches verfahren der balken und lanhhubzylinder für vertikale bewegung, year :1995 MANUFACTURER: HESS, TYPE: SPEEDY, YEAR: 1995, MIN.-MAX. WORKPIECE LENGTH IN MM: 3.050, MIN.-MAX. WORKPIECE HEIGHT IN MM: CA 2.200, WORKING WIDHT MAX MM: 600, HYDRAULICAL/PNEUMATICAL: HYDRAULISCH, HIGH / LOW PRESSURE: HOCHDRUCK, CYLINDER VERTICAL: 3, CYLINDER HORIZONTALLY: 2, FREE TEXT: AUTOMATISCHES VERFAHREN DER BALKEN UND LANHHUBZYLINDER FüR VERTIKALE BEWEGUNG, YEAR :1995
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Precio: 27 €
Ubicación: Land-europrop 20-300, galv., new
low dead weight allows for speedy work and conserves energy

prop retains its value for many years thanks to high-quality production and galvanisation

reliability in many applications due to high load capacity up to 36.7 kn

optimised thread pitch allows for quick and safe release of fixed prop

safe working conditions thanks to handtrapprevention and anti-drop-out latch

certificated en 1965, produced in europe.

 EUROPROP 20-300, GALV., NEW LOW DEAD WEIGHT ALLOWS FOR SPEEDY WORK AND CONSERVES ENERGY PROP RETAINS ITS VALUE FOR MANY YEARS THANKS TO HIGH-QUALITY PRODUCTION AND GALVANISATION RELIABILITY IN MANY APPLICATIONS DUE TO HIGH LOAD CAPACITY UP TO 36.7 KN OPTIMISED THREAD PITCH ALLOWS FOR QUICK AND SAFE RELEASE OF FIXED PROP SAFE WORKING CONDITIONS THANKS TO HANDTRAPPREVENTION AND ANTI-DROP-OUT LATCH CERTIFICATED EN 1965, PRODUCED IN EUROPE.
Vendedor: Berger International
Año de construcción: usado
Precio: used machinery auction RESALE 450 €
Ubicación: Land-weight approx.: 1670 kg<br/>dimensions (l x w x h) approx.: 4500 x 950 x 2900 mm<br/>description: hess speedy hydraulic frame press with one medium pressure beam<br> ? working dimensions max: 3550x2250 mm<br> ? working dimensions min: horizontal 580 mm, vertcal 320 mm<br> ? 3 vertical pressure beams: 1000 mm stroke, 20000n press power<br> WEIGHT APPROX.: 1670 KG
DIMENSIONS (L X W X H) APPROX.: 4500 X 950 X 2900 MM
DESCRIPTION: HESS SPEEDY HYDRAULIC FRAME PRESS WITH ONE MEDIUM PRESSURE BEAM
? WORKING DIMENSIONS MAX: 3550X2250 MM
? WORKING DIMENSIONS MIN: HORIZONTAL 580 MM, VERTCAL 320 MM
? 3 VERTICAL PRESSURE BEAMS: 1000 MM STROKE, 20000N PRESS POWER
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-main slide: 110mm, front cross slide: 100mm, swivelling range: 360°, back cross slide: 100mm, top slide: 60mm, weight: 360kg.  MAIN SLIDE: 110MM, FRONT CROSS SLIDE: 100MM, SWIVELLING RANGE: 360°, BACK CROSS SLIDE: 100MM, TOP SLIDE: 60MM, WEIGHT: 360KG.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 100 €
Ubicación: Land-weight approx.: 30 kg<br/>dimensions (l x w x h) approx.: 1000 x 800 x 800 mm<br/>description: with software in german. see photos. WEIGHT APPROX.: 30 KG
DIMENSIONS (L X W X H) APPROX.: 1000 X 800 X 800 MM
DESCRIPTION: WITH SOFTWARE IN GERMAN. SEE PHOTOS.
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 1.655 €
Ubicación: Land-42xsmart prop 20-350, new
1xstack frame, galvanized, new, 1,55x0,85  eur 150,00 per piece
low dead weight allows for speedy work and conserves energy

prop retains its value for many years thanks to high-quality production and galvanisation

optimised thread pitch allows for quick and safe release of fixed prop

safe working conditions thanks to handtrapprevention and anti-drop-out latch.

 42XSMART PROP 20-350, NEW 1XSTACK FRAME, GALVANIZED, NEW, 1,55X0,85 EUR 150,00 PER PIECE LOW DEAD WEIGHT ALLOWS FOR SPEEDY WORK AND CONSERVES ENERGY PROP RETAINS ITS VALUE FOR MANY YEARS THANKS TO HIGH-QUALITY PRODUCTION AND GALVANISATION OPTIMISED THREAD PITCH ALLOWS FOR QUICK AND SAFE RELEASE OF FIXED PROP SAFE WORKING CONDITIONS THANKS TO HANDTRAPPREVENTION AND ANTI-DROP-OUT LATCH.
Vendedor: Berger International
Año de construcción: usado
Ubicación: Land-size of profile - max.: 150 mm<br/>number of drilling agregates: 1 stk.<br/>bore diameter: 35 mm<br/>quill stroke: 140 mm<br/>spindle taper: mk 4 <br/>column diameter: 120 mm<br/>throat: 300 mm<br/>distance spindlenose - table min./max.: 50 / 600 mm<br/>spindle turning speed range: 14 / 45 - 1650 u/min<br/>impact length: 2000 mm<br/>base plate: 420 x 420 mm<br/>max. speed ot the feeder: 200 mm/sec.<br/>positioning accuracy: auf 3 m +/- 0,2 mm<br/>air consumption: 6 bar<br/>boring motor: 1,5 kw<br/>carrying capacity feeder: 45 kg<br/>tube diameter min.: 20 mm<br/>min. distance hole/end of material: 40 mm<br/>weight of the machine ca.: 400 kg<br/>dimensions of the machine ca.: ca. 2,5 x 0,7 x 2 m<br/>electric 400 volt:  <br/>cooling equipment (micro-cooler): luft - Öl <br/>protection made in plastic:  <br/>new controlled series drilling machine with 3 automatic spindel feeds in<br/>conjunction with the automatic speedy feed system suitable for pipe and<br/>profile material.<br/>the machine drills automatically holes in the programmed intervals only in a <br/>fixed line. the material is clamped with a quick - tensioner (aluminium) on <br/>the feed unit. the pneum. vice fixes the workpiece during the drilling phase. <br/>the automatic drilling machine drills the hole with autom. feed, the vise solves<br/>pneumatically and the it moves to the next memory stored position, the<br/>vise clamps and the next cycle begins. the vise can also work outside the<br/>center position. die control with alphanumeric grafic display<br/>stores 99 programs with 99 different hole intervals , 99 times repeatable.<br/>max. feed 200 mm / sec. - individually programmable.<br/>accuracy / - 0.2 mm. the machine can also be manually and semi-automatically<br/>used. the feeder is available in various lengths up to 6 m. the speed of the<br/>feed material , the drilling feed , the depth and the speed of the drill<br/>spindle can be adjusted as needed.<br/>machine dealer with own stock of 2500 m² and certification of the database<br/>machineseeker.<br/><br/><br/><br/><br/> SIZE OF PROFILE - MAX.: 150 MM
NUMBER OF DRILLING AGREGATES: 1 STK.
BORE DIAMETER: 35 MM
QUILL STROKE: 140 MM
SPINDLE TAPER: MK 4
COLUMN DIAMETER: 120 MM
THROAT: 300 MM
DISTANCE SPINDLENOSE - TABLE MIN./MAX.: 50 / 600 MM
SPINDLE TURNING SPEED RANGE: 14 / 45 - 1650 U/MIN
IMPACT LENGTH: 2000 MM
BASE PLATE: 420 X 420 MM
MAX. SPEED OT THE FEEDER: 200 MM/SEC.
POSITIONING ACCURACY: AUF 3 M +/- 0,2 MM
AIR CONSUMPTION: 6 BAR
BORING MOTOR: 1,5 KW
CARRYING CAPACITY FEEDER: 45 KG
TUBE DIAMETER MIN.: 20 MM
MIN. DISTANCE HOLE/END OF MATERIAL: 40 MM
WEIGHT OF THE MACHINE CA.: 400 KG
DIMENSIONS OF THE MACHINE CA.: CA. 2,5 X 0,7 X 2 M
ELECTRIC 400 VOLT:
COOLING EQUIPMENT (MICRO-COOLER): LUFT - ÖL
PROTECTION MADE IN PLASTIC:
NEW CONTROLLED SERIES DRILLING MACHINE WITH 3 AUTOMATIC SPINDEL FEEDS IN
CONJUNCTION WITH THE AUTOMATIC SPEEDY FEED SYSTEM SUITABLE FOR PIPE AND
PROFILE MATERIAL.
THE MACHINE DRILLS AUTOMATICALLY HOLES IN THE PROGRAMMED INTERVALS ONLY IN A
FIXED LINE. THE MATERIAL IS CLAMPED WITH A QUICK - TENSIONER (ALUMINIUM) ON
THE FEED UNIT. THE PNEUM. VICE FIXES THE WORKPIECE DURING THE DRILLING PHASE.
THE AUTOMATIC DRILLING MACHINE DRILLS THE HOLE WITH AUTOM. FEED, THE VISE SOLVES
PNEUMATICALLY AND THE IT MOVES TO THE NEXT MEMORY STORED POSITION, THE
VISE CLAMPS AND THE NEXT CYCLE BEGINS. THE VISE CAN ALSO WORK OUTSIDE THE
CENTER POSITION. DIE CONTROL WITH ALPHANUMERIC GRAFIC DISPLAY
STORES 99 PROGRAMS WITH 99 DIFFERENT HOLE INTERVALS , 99 TIMES REPEATABLE.
MAX. FEED 200 MM / SEC. - INDIVIDUALLY PROGRAMMABLE.
ACCURACY / - 0.2 MM. THE MACHINE CAN ALSO BE MANUALLY AND SEMI-AUTOMATICALLY
USED. THE FEEDER IS AVAILABLE IN VARIOUS LENGTHS UP TO 6 M. THE SPEED OF THE
FEED MATERIAL , THE DRILLING FEED , THE DEPTH AND THE SPEED OF THE DRILL
SPINDLE CAN BE ADJUSTED AS NEEDED.
MACHINE DEALER WITH OWN STOCK OF 2500 M² AND CERTIFICATION OF THE DATABASE
MACHINESEEKER.




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 425.000 €
Ubicación: mould size: w=600 mm, l=205 mm, h=25 mm;
moulding capacity: up to 23 moulds/min;
primary step mould cooler; secondary step mould cooler; third step mould cooler;
5 mass depositing heads;
built year 1968.
2) chocolate tablet wrapping machine \"otto haensel\" (speedy 7216); mignonettes 10 gr wrapping envelope type format;
built year 1992.
3) metal detector \"safeline\" (sdt700).
4) inkjet printer \"willett\" (450).
5) depositing plate for chocolate mass.
6) depositing plate for filling mass \"lekos\";
bottom depositing plate with undercutting knife for depositing of mass with ingredients.
7) depositor \"lekos\" (nh600);
jacketed hopper with two stirrers placed vertically with own drive;
42 pistons equipped with cup seals;
self tempered water circuit;
all drives equipped with frequency converters;
sensor that controls the presence of the mould under the pouring head and gives a signal to the depositor to do the depositing work if there is a mould;
own control system;
built year 2007.
8) chocolate tablet wrapping machine \"lareka (o/h speedy);
mignonettes 10 gr wrapping envelope type format; built year 2006.
9) chocolate tablet wrapping machine \"lareka (k/h speedy); mignonettes 10 gr wrapping envelope type format; built year 2006.
10) box erecting machine \"mohrbach\" (541); up to 60 cycles / min. single station; built year 2006.
11) automatic wrapper \"bergami\" (cm40);
cellophane wrapping machine.
product sizes: a=60-300, b=50-150, c=25-90;
built year 2006.
12) carton sealer \"siat\" (sm8 p a); built year 1996.
13) tablet distribution system; for distributing mignonette tablets 10 gr ;
built year 2008.
14) film covering and shrinking machine \"kallfass gmbh & co\" (pack-jet 3000);
15) tablet distribution conveying system; main tablet distribution conveying system; built year 2008.
16) crosswise supplying conveyor (3 items), in-feeding conveyors for tablet wrapping machines; built year 2008.
17) ingredient distribution system \"aasted\" (fm1000); inclined elevator, ingredient continuous mixer, gantry, control unit; built year 2008.
18) flow-packing machine \"pfm\" (falcon ssx).
19) flow-packing machine \"redpack\" (7811).; good condition .gif" alt="Land-moulding line consists of:
1) chocolate tablet moulding line \"carle & montanari\" (st/600);
mould size: w=600 mm, l=205 mm, h=25 mm;
moulding capacity: up to 23 moulds/min;
primary step mould cooler; secondary step mould cooler; third step mould cooler;
5 mass depositing heads;
built year 1968.
2) chocolate tablet wrapping machine \"otto haensel\" (speedy 7216); mignonettes 10 gr wrapping envelope type format;
built year 1992.
3) metal detector \"safeline\" (sdt700).
4) inkjet printer \"willett\" (450).
5) depositing plate for chocolate mass.
6) depositing plate for filling mass \"lekos\";
bottom depositing plate with undercutting knife for depositing of mass with ingredients.
7) depositor \"lekos\" (nh600);
jacketed hopper with two stirrers placed vertically with own drive;
42 pistons equipped with cup seals;
self tempered water circuit;
all drives equipped with frequency converters;
sensor that controls the presence of the mould under the pouring head and gives a signal to the depositor to do the depositing work if there is a mould;
own control system;
built year 2007.
8) chocolate tablet wrapping machine \"lareka (o/h speedy);
mignonettes 10 gr wrapping envelope type format; built year 2006.
9) chocolate tablet wrapping machine \"lareka (k/h speedy); mignonettes 10 gr wrapping envelope type format; built year 2006.
10) box erecting machine \"mohrbach\" (541); up to 60 cycles / min. single station; built year 2006.
11) automatic wrapper \"bergami\" (cm40);
cellophane wrapping machine.
product sizes: a=60-300, b=50-150, c=25-90;
built year 2006.
12) carton sealer \"siat\" (sm8 p a); built year 1996.
13) tablet distribution system; for distributing mignonette tablets 10 gr ;
built year 2008.
14) film covering and shrinking machine \"kallfass gmbh & co\" (pack-jet 3000);
15) tablet distribution conveying system; main tablet distribution conveying system; built year 2008.
16) crosswise supplying conveyor (3 items), in-feeding conveyors for tablet wrapping machines; built year 2008.
17) ingredient distribution system \"aasted\" (fm1000); inclined elevator, ingredient continuous mixer, gantry, control unit; built year 2008.
18) flow-packing machine \"pfm\" (falcon ssx).
19) flow-packing machine \"redpack\" (7811).; good condition " style="height: 18px;"> MOULDING LINE CONSISTS OF:
1) CHOCOLATE TABLET MOULDING LINE \"CARLE & MONTANARI\" (ST/600);
MOULD SIZE: W=600 MM, L=205 MM, H=25 MM;
MOULDING CAPACITY: UP TO 23 MOULDS/MIN;
PRIMARY STEP MOULD COOLER; SECONDARY STEP MOULD COOLER; THIRD STEP MOULD COOLER;
5 MASS DEPOSITING HEADS;
BUILT YEAR 1968.
2) CHOCOLATE TABLET WRAPPING MACHINE \"OTTO HAENSEL\" (SPEEDY 7216); MIGNONETTES 10 GR WRAPPING ENVELOPE TYPE FORMAT;
BUILT YEAR 1992.
3) METAL DETECTOR \"SAFELINE\" (SDT700).
4) INKJET PRINTER \"WILLETT\" (450).
5) DEPOSITING PLATE FOR CHOCOLATE MASS.
6) DEPOSITING PLATE FOR FILLING MASS \"LEKOS\";
BOTTOM DEPOSITING PLATE WITH UNDERCUTTING KNIFE FOR DEPOSITING OF MASS WITH INGREDIENTS.
7) DEPOSITOR \"LEKOS\" (NH600);
JACKETED HOPPER WITH TWO STIRRERS PLACED VERTICALLY WITH OWN DRIVE;
42 PISTONS EQUIPPED WITH CUP SEALS;
SELF TEMPERED WATER CIRCUIT;
ALL DRIVES EQUIPPED WITH FREQUENCY CONVERTERS;
SENSOR THAT CONTROLS THE PRESENCE OF THE MOULD UNDER THE POURING HEAD AND GIVES A SIGNAL TO THE DEPOSITOR TO DO THE DEPOSITING WORK IF THERE IS A MOULD;
OWN CONTROL SYSTEM;
BUILT YEAR 2007.
8) CHOCOLATE TABLET WRAPPING MACHINE \"LAREKA (O/H SPEEDY);
MIGNONETTES 10 GR WRAPPING ENVELOPE TYPE FORMAT; BUILT YEAR 2006.
9) CHOCOLATE TABLET WRAPPING MACHINE \"LAREKA (K/H SPEEDY); MIGNONETTES 10 GR WRAPPING ENVELOPE TYPE FORMAT; BUILT YEAR 2006.
10) BOX ERECTING MACHINE \"MOHRBACH\" (541); UP TO 60 CYCLES / MIN. SINGLE STATION; BUILT YEAR 2006.
11) AUTOMATIC WRAPPER \"BERGAMI\" (CM40);
CELLOPHANE WRAPPING MACHINE.
PRODUCT SIZES: A=60-300, B=50-150, C=25-90;
BUILT YEAR 2006.
12) CARTON SEALER \"SIAT\" (SM8 P A); BUILT YEAR 1996.
13) TABLET DISTRIBUTION SYSTEM; FOR DISTRIBUTING MIGNONETTE TABLETS 10 GR ;
BUILT YEAR 2008.
14) FILM COVERING AND SHRINKING MACHINE \"KALLFASS GMBH & CO\" (PACK-JET 3000);
15) TABLET DISTRIBUTION CONVEYING SYSTEM; MAIN TABLET DISTRIBUTION CONVEYING SYSTEM; BUILT YEAR 2008.
16) CROSSWISE SUPPLYING CONVEYOR (3 ITEMS), IN-FEEDING CONVEYORS FOR TABLET WRAPPING MACHINES; BUILT YEAR 2008.
17) INGREDIENT DISTRIBUTION SYSTEM \"AASTED\" (FM1000); INCLINED ELEVATOR, INGREDIENT CONTINUOUS MIXER, GANTRY, CONTROL UNIT; BUILT YEAR 2008.
18) FLOW-PACKING MACHINE \"PFM\" (FALCON SSX).
19) FLOW-PACKING MACHINE \"REDPACK\" (7811).; GOOD CONDITION
Vendedor: Middle East Trading
Año de construcción: usado
Ubicación: Land-size of profile - max.: 150 mm<br/>number of drilling agregates: 1 stk.<br/>bore diameter: 12 mm<br/>quill stroke: 90 mm<br/>spindle taper: mk 2 <br/>spindle turning speed range: 2 / 750 + 1450 u/min<br/>impact length: 3000 mm<br/>air consumption: 6 bar<br/>feed speeds: 200 mm/min<br/>positioning accuracy: bei 3 m +/- 0,2 mm<br/>tube diameter min.: 20 mm<br/>min. distance hole/end of material: 30 mm<br/>total power requirement: 1,33 kw<br/>weight of the machine ca.: 850 kg<br/>dimensions of the machine ca.: ca. 3,5 x 0,7 x 2 m<br/>cooling equipment (micro-cooler):  <br/>electric 400 volt: 50 hz - 3ph - n <br/>controlled series drilling machine with 3 automatic spindel feeds in<br/>conjunction with the automatic speedy feed system suitable for pipe and<br/>profile material.<br/>the machine drills automatically holes in the programmed intervals only in a <br/>fixed line. the material is clamped with a quick - tensioner (aluminium) on <br/>the feed unit. the pneum. vice fixes the workpiece during the drilling phase. <br/>the automatic drilling machine drills the hole with autom. feed, the vise solves<br/>pneumatically and the it moves to the next memory stored position, the<br/>vise clamps and the next cycle begins. the vise can also work outside the<br/>center position. die control with alphanumeric grafic display<br/>stores 99 programs with 99 different hole intervals , 99 times repeatable.<br/>max. feed 200 mm / sec. - individually programmable.<br/>accuracy / - 0.2 mm. the machine can also be manually and semi-automatically<br/>used. the feeder is available in various lengths up to 6 m. the speed of the<br/>feed material , the drilling feed , the depth and the speed of the drill<br/>spindle can be adjusted as needed.<br/>machine dealer with own stock of 2500 m² and certification of the database<br/>machineseeker.<br/><br/><br/><br/><br/> SIZE OF PROFILE - MAX.: 150 MM
NUMBER OF DRILLING AGREGATES: 1 STK.
BORE DIAMETER: 12 MM
QUILL STROKE: 90 MM
SPINDLE TAPER: MK 2
SPINDLE TURNING SPEED RANGE: 2 / 750 + 1450 U/MIN
IMPACT LENGTH: 3000 MM
AIR CONSUMPTION: 6 BAR
FEED SPEEDS: 200 MM/MIN
POSITIONING ACCURACY: BEI 3 M +/- 0,2 MM
TUBE DIAMETER MIN.: 20 MM
MIN. DISTANCE HOLE/END OF MATERIAL: 30 MM
TOTAL POWER REQUIREMENT: 1,33 KW
WEIGHT OF THE MACHINE CA.: 850 KG
DIMENSIONS OF THE MACHINE CA.: CA. 3,5 X 0,7 X 2 M
COOLING EQUIPMENT (MICRO-COOLER):
ELECTRIC 400 VOLT: 50 HZ - 3PH - N
CONTROLLED SERIES DRILLING MACHINE WITH 3 AUTOMATIC SPINDEL FEEDS IN
CONJUNCTION WITH THE AUTOMATIC SPEEDY FEED SYSTEM SUITABLE FOR PIPE AND
PROFILE MATERIAL.
THE MACHINE DRILLS AUTOMATICALLY HOLES IN THE PROGRAMMED INTERVALS ONLY IN A
FIXED LINE. THE MATERIAL IS CLAMPED WITH A QUICK - TENSIONER (ALUMINIUM) ON
THE FEED UNIT. THE PNEUM. VICE FIXES THE WORKPIECE DURING THE DRILLING PHASE.
THE AUTOMATIC DRILLING MACHINE DRILLS THE HOLE WITH AUTOM. FEED, THE VISE SOLVES
PNEUMATICALLY AND THE IT MOVES TO THE NEXT MEMORY STORED POSITION, THE
VISE CLAMPS AND THE NEXT CYCLE BEGINS. THE VISE CAN ALSO WORK OUTSIDE THE
CENTER POSITION. DIE CONTROL WITH ALPHANUMERIC GRAFIC DISPLAY
STORES 99 PROGRAMS WITH 99 DIFFERENT HOLE INTERVALS , 99 TIMES REPEATABLE.
MAX. FEED 200 MM / SEC. - INDIVIDUALLY PROGRAMMABLE.
ACCURACY / - 0.2 MM. THE MACHINE CAN ALSO BE MANUALLY AND SEMI-AUTOMATICALLY
USED. THE FEEDER IS AVAILABLE IN VARIOUS LENGTHS UP TO 6 M. THE SPEED OF THE
FEED MATERIAL , THE DRILLING FEED , THE DEPTH AND THE SPEED OF THE DRILL
SPINDLE CAN BE ADJUSTED AS NEEDED.
MACHINE DEALER WITH OWN STOCK OF 2500 M² AND CERTIFICATION OF THE DATABASE
MACHINESEEKER.




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 1.300 €
Ubicación: Land-technical data:<br/>  <br/>  motor power: 0,75 kw<br/>  voltage: 220 v / 50 hz<br/>  machine width: 900 mm<br/>  machine height: 1150 mm<br/>  machine length: 750 mm<br/>  weight: 135 kg<br/>  year of construction: 1996; ready for use TECHNICAL DATA:

MOTOR POWER: 0,75 KW
VOLTAGE: 220 V / 50 HZ
MACHINE WIDTH: 900 MM
MACHINE HEIGHT: 1150 MM
MACHINE LENGTH: 750 MM
WEIGHT: 135 KG
YEAR OF CONSTRUCTION: 1996; READY FOR USE
Vendedor: Telkes Gép GmbH
Año de construcción: usado
Ubicación: Land-number of spindles: 1 <br/>bore capacity in steel (diameter): 35 mm<br/>bore stroke: 140 mm<br/>size of profile - max.: 150 mm<br/>bore diameter: 35 mm<br/>spindle taper: mk 4 <br/>column diameter: 120 mm<br/>throat: 300 mm<br/>distance spindlenose - table min./max.: 50 / 600 mm<br/>spindle turning speed range: 14 / 45 - 1650 u/min<br/>impact length: 2000 mm<br/>base plate: 420 x 420 mm<br/>max. speed ot the feeder: 200 mm/sec.<br/>positioning accuracy: auf 3 m +/- 0,2 mm<br/>air consumption: 6 bar<br/>boring motor: 1,5 kw<br/>carrying capacity feeder: 45 kg<br/>tube diameter min.: 20 mm<br/>min. distance hole/end of material: 40 mm<br/>weight of the machine ca.: 400 kg<br/>dimensions of the machine ca.: ca. 2,5 x 0,7 x 2 m<br/>electric 400 volt:  <br/>cooling equipment (micro-cooler): luft - Öl <br/>protection made in plastic:  <br/>new controlled series drilling machine with 3 automatic spindel feeds in<br/>conjunction with the automatic speedy feed system suitable for pipe and<br/>profile material.<br/>the machine drills automatically holes in the programmed intervals only in a<br/>fixed line. the material is clamped with a quick - tensioner (aluminium) on<br/>the feed unit. the pneum. vice fixes the workpiece during the drilling phase.<br/>the automatic drilling machine drills the hole with autom. feed, the vise solves<br/>pneumatically and the it moves to the next memory stored position, the<br/>vise clamps and the next cycle begins. the vise can also work outside the<br/>center position. die control with alphanumeric grafic display<br/>stores 99 programs with 99 different hole intervals , 99 times repeatable.<br/>max. feed 200 mm / sec. - individually programmable.<br/>accuracy / - 0.2 mm. the machine can also be manually and semi-automatically<br/>used. the feeder is available in various lengths up to 6 m. the speed of the<br/>feed material , the drilling feed , the depth and the speed of the drill<br/>spindle can be adjusted as needed.<br/>machine dealer with own stock of 2500 m² and certification of the database<br/>machineseeker.<br/><br/><br/><br/><br/> NUMBER OF SPINDLES: 1
BORE CAPACITY IN STEEL (DIAMETER): 35 MM
BORE STROKE: 140 MM
SIZE OF PROFILE - MAX.: 150 MM
BORE DIAMETER: 35 MM
SPINDLE TAPER: MK 4
COLUMN DIAMETER: 120 MM
THROAT: 300 MM
DISTANCE SPINDLENOSE - TABLE MIN./MAX.: 50 / 600 MM
SPINDLE TURNING SPEED RANGE: 14 / 45 - 1650 U/MIN
IMPACT LENGTH: 2000 MM
BASE PLATE: 420 X 420 MM
MAX. SPEED OT THE FEEDER: 200 MM/SEC.
POSITIONING ACCURACY: AUF 3 M +/- 0,2 MM
AIR CONSUMPTION: 6 BAR
BORING MOTOR: 1,5 KW
CARRYING CAPACITY FEEDER: 45 KG
TUBE DIAMETER MIN.: 20 MM
MIN. DISTANCE HOLE/END OF MATERIAL: 40 MM
WEIGHT OF THE MACHINE CA.: 400 KG
DIMENSIONS OF THE MACHINE CA.: CA. 2,5 X 0,7 X 2 M
ELECTRIC 400 VOLT:
COOLING EQUIPMENT (MICRO-COOLER): LUFT - ÖL
PROTECTION MADE IN PLASTIC:
NEW CONTROLLED SERIES DRILLING MACHINE WITH 3 AUTOMATIC SPINDEL FEEDS IN
CONJUNCTION WITH THE AUTOMATIC SPEEDY FEED SYSTEM SUITABLE FOR PIPE AND
PROFILE MATERIAL.
THE MACHINE DRILLS AUTOMATICALLY HOLES IN THE PROGRAMMED INTERVALS ONLY IN A
FIXED LINE. THE MATERIAL IS CLAMPED WITH A QUICK - TENSIONER (ALUMINIUM) ON
THE FEED UNIT. THE PNEUM. VICE FIXES THE WORKPIECE DURING THE DRILLING PHASE.
THE AUTOMATIC DRILLING MACHINE DRILLS THE HOLE WITH AUTOM. FEED, THE VISE SOLVES
PNEUMATICALLY AND THE IT MOVES TO THE NEXT MEMORY STORED POSITION, THE
VISE CLAMPS AND THE NEXT CYCLE BEGINS. THE VISE CAN ALSO WORK OUTSIDE THE
CENTER POSITION. DIE CONTROL WITH ALPHANUMERIC GRAFIC DISPLAY
STORES 99 PROGRAMS WITH 99 DIFFERENT HOLE INTERVALS , 99 TIMES REPEATABLE.
MAX. FEED 200 MM / SEC. - INDIVIDUALLY PROGRAMMABLE.
ACCURACY / - 0.2 MM. THE MACHINE CAN ALSO BE MANUALLY AND SEMI-AUTOMATICALLY
USED. THE FEEDER IS AVAILABLE IN VARIOUS LENGTHS UP TO 6 M. THE SPEED OF THE
FEED MATERIAL , THE DRILLING FEED , THE DEPTH AND THE SPEED OF THE DRILL
SPINDLE CAN BE ADJUSTED AS NEEDED.
MACHINE DEALER WITH OWN STOCK OF 2500 M² AND CERTIFICATION OF THE DATABASE
MACHINESEEKER.




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 160 €
Ubicación: Land-; ready for use ; READY FOR USE
Vendedor: Komplett-Konzept Verwertungs GmbH
Año de construcción: usado
Ubicación: Land-diameter: 112 mm<br/>number of clamps: 8 st.<br/><br/><br/><br/><br/> DIAMETER: 112 MM
NUMBER OF CLAMPS: 8 ST.




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-low dead weight allows for speedy work and conserves energy

prop retains its value for many years thanks to high-quality production and galvanisation

reliability in many applications due to high load capacity up to 36.7 kn

optimised thread pitch allows for quick and safe release of fixed prop

safe working conditions thanks to handtrapprevention and anti-drop-out latch

certificated en 1965, produced in europe.
 LOW DEAD WEIGHT ALLOWS FOR SPEEDY WORK AND CONSERVES ENERGY PROP RETAINS ITS VALUE FOR MANY YEARS THANKS TO HIGH-QUALITY PRODUCTION AND GALVANISATION RELIABILITY IN MANY APPLICATIONS DUE TO HIGH LOAD CAPACITY UP TO 36.7 KN OPTIMISED THREAD PITCH ALLOWS FOR QUICK AND SAFE RELEASE OF FIXED PROP SAFE WORKING CONDITIONS THANKS TO HANDTRAPPREVENTION AND ANTI-DROP-OUT LATCH CERTIFICATED EN 1965, PRODUCED IN EUROPE.
Vendedor: Berger International
Año de construcción: usado
Ubicación: Land-technical data:size of the table mm: 1000x750max trimming high mm: 60installed power: 1.5 kwoverall dimensions (height-width-length) mm:  900 x 750 x 1150weight kg: 110 TECHNICAL DATA:SIZE OF THE TABLE MM: 1000X750MAX TRIMMING HIGH MM: 60INSTALLED POWER: 1.5 KWOVERALL DIMENSIONS (HEIGHT-WIDTH-LENGTH) MM: 900 X 750 X 1150WEIGHT KG: 110
Vendedor: Mercator S.R.L.
Año de construcción: usado
Precio: 30 €
Ubicación: Land-stack frame, galvanized, new, 1,55x0,85  eur 150,00 per piece

low dead weight allows for speedy work and conserves energy

prop retains its value for many years thanks to high-quality production and galvanisation

reliability in many applications due to high load capacity up to 36.7 kn

optimised thread pitch allows for quick and safe release of fixed prop

safe working conditions thanks to handtrapprevention and anti-drop-out latch
  STACK FRAME, GALVANIZED, NEW, 1,55X0,85 EUR 150,00 PER PIECE LOW DEAD WEIGHT ALLOWS FOR SPEEDY WORK AND CONSERVES ENERGY PROP RETAINS ITS VALUE FOR MANY YEARS THANKS TO HIGH-QUALITY PRODUCTION AND GALVANISATION RELIABILITY IN MANY APPLICATIONS DUE TO HIGH LOAD CAPACITY UP TO 36.7 KN OPTIMISED THREAD PITCH ALLOWS FOR QUICK AND SAFE RELEASE OF FIXED PROP SAFE WORKING CONDITIONS THANKS TO HANDTRAPPREVENTION AND ANTI-DROP-OUT LATCH
Vendedor: Berger International
Año de construcción: usado
Ubicación: Land-precast plant:

2 echo hollow core manufacturing lines, complete for 15 cm to 40 cm, 8 x 135 m casting bed, production plant for pre-stressed concrete slabs.
precast concrete hollow core slab production system.

10 demag crane 10 t 32 t 40 t
318 m tilting tables 2.4 m wide, 2.5 m wide, 3.5 m wide
73 m formwork for pillars and beams
138 m prestressed bridge formwork
2 bianchi and paul tensioning hydraulic - 2000 t
1 bianchi speedy concrete transporter
1 skako concrete mixing plant
1 mep bar bending machine
1 cat generator
1 laboratory equipment
many spare parts in the package.

link to 25 pictures:
https://1drv.ms/f/s!aglzngxem8pan3ujazjwtqmpurm3
PRECAST PLANT: 2 ECHO HOLLOW CORE MANUFACTURING LINES, COMPLETE FOR 15 CM TO 40 CM, 8 X 135 M CASTING BED, PRODUCTION PLANT FOR PRE-STRESSED CONCRETE SLABS. PRECAST CONCRETE HOLLOW CORE SLAB PRODUCTION SYSTEM. 10 DEMAG CRANE 10 T 32 T 40 T 318 M TILTING TABLES 2.4 M WIDE, 2.5 M WIDE, 3.5 M WIDE 73 M FORMWORK FOR PILLARS AND BEAMS 138 M PRESTRESSED BRIDGE FORMWORK 2 BIANCHI AND PAUL TENSIONING HYDRAULIC - 2000 T 1 BIANCHI SPEEDY CONCRETE TRANSPORTER 1 SKAKO CONCRETE MIXING PLANT 1 MEP BAR BENDING MACHINE 1 CAT GENERATOR 1 LABORATORY EQUIPMENT MANY SPARE PARTS IN THE PACKAGE. LINK TO 25 PICTURES: HTTPS://1DRV.MS/F/S!AGLZNGXEM8PAN3UJAZJWTQMPURM3
Vendedor: ERICH PETER MACHINES - PLANTS GMBH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more SPEEDY types: