87 ofertas

Año de construcción: usado
Ubicación: Land-pilot spinning extrision line designed by fourne 
to make trials of polyester and polyamides, mono & multifilament.

type : ex 25 - 25 d
max. throughput : ca. 7,0 kg/h (pa6), ca. 5,6 kg/h ( pp ), ca. 8,2 kg/h ( pet )
spinbeam /melt pipe : electrically heated 
spinbeam design : for 1 monfil  or 2 multifilament threadlines
spinpumps       :  1 = 2 x 2.4cc    , 1 = 1 x 2.4 cc ,  1 = 1 x 0.6 cc
spinnerettes    : 42 / 59 / 72
crossflow quench cabinette 

take-up winder  sw4s 
+ 
draw – stand : edmund erdmann  gmbh
type : drawmod  02/380-3/5/6 lm
etc  PILOT SPINNING EXTRISION LINE DESIGNED BY FOURNE TO MAKE TRIALS OF POLYESTER AND POLYAMIDES, MONO & MULTIFILAMENT. TYPE : EX 25 - 25 D MAX. THROUGHPUT : CA. 7,0 KG/H (PA6), CA. 5,6 KG/H ( PP ), CA. 8,2 KG/H ( PET ) SPINBEAM /MELT PIPE : ELECTRICALLY HEATED  SPINBEAM DESIGN : FOR 1 MONFIL  OR 2 MULTIFILAMENT THREADLINES SPINPUMPS  :  1 = 2 X 2.4CC    , 1 = 1 X 2.4 CC ,  1 = 1 X 0.6 CC SPINNERETTES   : 42 / 59 / 72 CROSSFLOW QUENCH CABINETTE TAKE-UP WINDER SW4S + DRAW – STAND : EDMUND ERDMANN  GMBH TYPE : DRAWMOD  02/380-3/5/6 LM ETC
Vendedor: Hil-Diolen Polymers GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 8.600 €
Ubicación: Land-weight approx.: 2500 kg<br/>dimensions (l x w x h) approx.: 3000 x 2000 x 2300 mm<br/>description: spinner pd cnc lathe spinner pd cnc lathe swinging diameter 300 mm, travel x - 400 mm, z - 400 mm, rapid traverse 12 m / min, main spindle probably 32 mm, speed max. 8000 rpm, spindle nose diameter 100/110 mm, spindle passage 32 mm, pick-off, linear tool carrier without tools, tool changer with 16 tool stations, 8 of which are driven, tool holder vdi 16, max. speed of driven tools 6000 rpm, max. torque 23 nm, control fanuc machine number a1784<br> WEIGHT APPROX.: 2500 KG
DIMENSIONS (L X W X H) APPROX.: 3000 X 2000 X 2300 MM
DESCRIPTION: SPINNER PD CNC LATHE SPINNER PD CNC LATHE SWINGING DIAMETER 300 MM, TRAVEL X - 400 MM, Z - 400 MM, RAPID TRAVERSE 12 M / MIN, MAIN SPINDLE PROBABLY 32 MM, SPEED MAX. 8000 RPM, SPINDLE NOSE DIAMETER 100/110 MM, SPINDLE PASSAGE 32 MM, PICK-OFF, LINEAR TOOL CARRIER WITHOUT TOOLS, TOOL CHANGER WITH 16 TOOL STATIONS, 8 OF WHICH ARE DRIVEN, TOOL HOLDER VDI 16, MAX. SPEED OF DRIVEN TOOLS 6000 RPM, MAX. TORQUE 23 NM, CONTROL FANUC MACHINE NUMBER A1784
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-general information:
control heidenhain tnc620
traverse paths x 760 mm y 460 mm z 460 mm
hours of operation 23.798 h

workspace:
min. distance of spindle nose 120 mm
maximum distance spindle nose 580 mm

axes:
feed / rapid traverse 36 m / min

spindle:
maximum speed 12,000 rpm
chuck sk40

tool magazine:
number of tool stations 32
maximum tool length 300 mm
maximum tool weight 7 kg

dimensions and weight:
2,590 mm x 1,700 mm x 2,825 mm weight approx. 4,000 kg GENERAL INFORMATION: CONTROL HEIDENHAIN TNC620 TRAVERSE PATHS X 760 MM Y 460 MM Z 460 MM HOURS OF OPERATION 23.798 H WORKSPACE: MIN. DISTANCE OF SPINDLE NOSE 120 MM MAXIMUM DISTANCE SPINDLE NOSE 580 MM AXES: FEED / RAPID TRAVERSE 36 M / MIN SPINDLE: MAXIMUM SPEED 12,000 RPM CHUCK SK40 TOOL MAGAZINE: NUMBER OF TOOL STATIONS 32 MAXIMUM TOOL LENGTH 300 MM MAXIMUM TOOL WEIGHT 7 KG DIMENSIONS AND WEIGHT: 2,590 MM X 1,700 MM X 2,825 MM WEIGHT APPROX. 4,000 KG
Vendedor: CNC BOTE Johann Demmel
Año de construcción: usado
Ubicación: Land-turning diameter: max. 500 mm<br/>turning length: max. 1.500 mm<br/>control: 840 d sl  siemens<br/>max. swing diameter: 800 mm<br/>main spindle::  <br/>max. rpm: 2.600 min/-1<br/>power capacity - main spindel: 22 / 33 kw<br/>max. torque: 263 nm<br/>chucking diameter: 315 - max. 500 mm<br/>type: ism 110 mm<br/>axis stroke::  <br/>x-axis: 360 mm<br/>y-axis: 120 (-55/+65) mm<br/>z-axis: 1.500 mm<br/>c-axis: 360 °<br/>turret::  <br/>tooling: 12 pos.<br/>driven statition: 12 pos<br/>tool taper: vdi 50 <br/>spindle speed - driven tool stations: max. 4.000 min -1<br/>tailstock::  <br/>taper of center: mk 4 <br/>diameter of quill: 110 mm<br/>tailstock adjustment: 1.600 mm<br/>feeds::  <br/>rapid traverse: x: 15 / z: 24 m/min<br/>total power requirement: 48 kw<br/>weight of the machine ca.: 8,5 t<br/>dimensions of the machine ca.: 5,0 x 3,0 x 2,5 m<br/>documents:  <br/>chip conveyor:  <br/>high pressure coolant: 8 / 15 bar <br/>three jaw chuck: smw 315 mm <br/>glas gauge:  <br/>c-axis:  <br/>y-axis:  <br/>tool drive mechanisum:  <br/>turret:  <br/>steady rest: 50 - 200mm <br/>tailstock: hydr. / autom. <br/>div. tool holder:  <br/>live tool holders:  <br/>cnc-turning- and millingcenter<br/>spinner - tc 800 l 110 mcy<br/><br/>- tool-drive<br/>- c-axis<br/>- y-axis<br/>- steady-rest 50-200mm<br/>- tailstock<br/><br/><br/><br/><br/> TURNING DIAMETER: MAX. 500 MM
TURNING LENGTH: MAX. 1.500 MM
CONTROL: 840 D SL SIEMENS
MAX. SWING DIAMETER: 800 MM
MAIN SPINDLE::
MAX. RPM: 2.600 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 22 / 33 KW
MAX. TORQUE: 263 NM
CHUCKING DIAMETER: 315 - MAX. 500 MM
TYPE: ISM 110 MM
AXIS STROKE::
X-AXIS: 360 MM
Y-AXIS: 120 (-55/+65) MM
Z-AXIS: 1.500 MM
C-AXIS: 360 °
TURRET::
TOOLING: 12 POS.
DRIVEN STATITION: 12 POS
TOOL TAPER: VDI 50
SPINDLE SPEED - DRIVEN TOOL STATIONS: MAX. 4.000 MIN -1
TAILSTOCK::
TAPER OF CENTER: MK 4
DIAMETER OF QUILL: 110 MM
TAILSTOCK ADJUSTMENT: 1.600 MM
FEEDS::
RAPID TRAVERSE: X: 15 / Z: 24 M/MIN
TOTAL POWER REQUIREMENT: 48 KW
WEIGHT OF THE MACHINE CA.: 8,5 T
DIMENSIONS OF THE MACHINE CA.: 5,0 X 3,0 X 2,5 M
DOCUMENTS:
CHIP CONVEYOR:
HIGH PRESSURE COOLANT: 8 / 15 BAR
THREE JAW CHUCK: SMW 315 MM
GLAS GAUGE:
C-AXIS:
Y-AXIS:
TOOL DRIVE MECHANISUM:
TURRET:
STEADY REST: 50 - 200MM
TAILSTOCK: HYDR. / AUTOM.
DIV. TOOL HOLDER:
LIVE TOOL HOLDERS:
CNC-TURNING- AND MILLINGCENTER
SPINNER - TC 800 L 110 MCY

- TOOL-DRIVE
- C-AXIS
- Y-AXIS
- STEADY-REST 50-200MM
- TAILSTOCK




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-turning diameter 400 mm
turning lenght 650 mm
with c ,y axes and subspindle
control unit fanuc 31i
can be inspected under power TURNING DIAMETER 400 MM TURNING LENGHT 650 MM WITH C ,Y AXES AND SUBSPINDLE CONTROL UNIT FANUC 31I CAN BE INSPECTED UNDER POWER
Vendedor: Pyramid Mühendislik
Año de construcción: usado
Ubicación: Land-swing dia.: 425 mm<br/>centre distance: ca 600 mm<br/>max. turning diameter: 310 mm<br/>rapid traverse x-axis: 15 m/min<br/>rapid traverse z-axis: 22,5 m/min<br/>max. z-axis travel: 640 mm<br/>turning speeds: 4500 u/min<br/>spindle bearing diameter: 120 mm<br/>diameter of quill: 80 / mk4 mm<br/>quill stroke: 120 mm<br/>turning diameter:  mm<br/>turning length:  mm<br/>control: siemens 840d / fanuc <br/>turning diameter over bed:  mm<br/>turning diameter over slide rest:  mm<br/>turning length:  mm<br/>max. x-axis travel: 230 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 42 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> SWING DIA.: 425 MM
CENTRE DISTANCE: CA 600 MM
MAX. TURNING DIAMETER: 310 MM
RAPID TRAVERSE X-AXIS: 15 M/MIN
RAPID TRAVERSE Z-AXIS: 22,5 M/MIN
MAX. Z-AXIS TRAVEL: 640 MM
TURNING SPEEDS: 4500 U/MIN
SPINDLE BEARING DIAMETER: 120 MM
DIAMETER OF QUILL: 80 / MK4 MM
QUILL STROKE: 120 MM
TURNING DIAMETER: MM
TURNING LENGTH: MM
CONTROL: SIEMENS 840D / FANUC
TURNING DIAMETER OVER BED: MM
TURNING DIAMETER OVER SLIDE REST: MM
TURNING LENGTH: MM
MAX. X-AXIS TRAVEL: 230 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 42 T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: AS Maschinenhandel
Año de construcción: usado
Ubicación: Land-max swing diameter 800 mm
max turning diameter 500 mm
max turning lenght 1500 mm
chuck size 315 mm
max spindle speed 2600 rpm
spindle bore 110 mm
control unit fanuc 31i
with steady rest ( autoblok slu 3.2 type ,clamp diameter 50-200 mm)
and chip conveyor MAX SWING DIAMETER 800 MM MAX TURNING DIAMETER 500 MM MAX TURNING LENGHT 1500 MM CHUCK SIZE 315 MM MAX SPINDLE SPEED 2600 RPM SPINDLE BORE 110 MM CONTROL UNIT FANUC 31I WITH STEADY REST ( AUTOBLOK SLU 3.2 TYPE ,CLAMP DIAMETER 50-200 MM) AND CHIP CONVEYOR
Vendedor: Pyramid Mühendislik
Año de construcción: usado
Precio: used machinery auction RESALE 7.300 €
Ubicación: Land-weight approx.: 9000 kg<br/>dimensions (l x w x h) approx.: 2500 x 3200 x 2900 mm<br/>description: control siemens<br> axes:<br> max.travel x-axis 1020 mm<br> max.travel y-axis 580 mm<br> max.travel z-axis 560 mm<br> clamping table:<br> table size 1500 x 600 mm<br> workpiece:<br> max.weight 2000 kg<br> spindle:<br> max. spindle speed<br> tool holder<br> bearing diameter in front<br> torque spindle (approx.30 min)<br> feed:<br> feed force: x-axis dan 817<br> feed force: y-axis dan 817<br> feed force:z-axis dan 817<br> tool changer:<br> number of tools 40<br> max. tool diameter (fully equipped)77 mm<br> max. tool diameter (subsequent places free) 130 mm<br> max. tool length 250 mm<br> max. tool weight 7 kg<br> changing time approx. 2,5 sek.<br> <br> dimensions/weight:<br> lxwxh: 2.5 x 3.2 x 2.9 m<br> installation surface 23.2 m²<br> total weight 9000 kg<br> WEIGHT APPROX.: 9000 KG
DIMENSIONS (L X W X H) APPROX.: 2500 X 3200 X 2900 MM
DESCRIPTION: CONTROL SIEMENS
AXES:
MAX.TRAVEL X-AXIS 1020 MM
MAX.TRAVEL Y-AXIS 580 MM
MAX.TRAVEL Z-AXIS 560 MM
CLAMPING TABLE:
TABLE SIZE 1500 X 600 MM
WORKPIECE:
MAX.WEIGHT 2000 KG
SPINDLE:
MAX. SPINDLE SPEED
TOOL HOLDER
BEARING DIAMETER IN FRONT
TORQUE SPINDLE (APPROX.30 MIN)
FEED:
FEED FORCE: X-AXIS DAN 817
FEED FORCE: Y-AXIS DAN 817
FEED FORCE:Z-AXIS DAN 817
TOOL CHANGER:
NUMBER OF TOOLS 40
MAX. TOOL DIAMETER (FULLY EQUIPPED)77 MM
MAX. TOOL DIAMETER (SUBSEQUENT PLACES FREE) 130 MM
MAX. TOOL LENGTH 250 MM
MAX. TOOL WEIGHT 7 KG
CHANGING TIME APPROX. 2,5 SEK.

DIMENSIONS/WEIGHT:
LXWXH: 2.5 X 3.2 X 2.9 M
INSTALLATION SURFACE 23.2 M²
TOTAL WEIGHT 9000 KG
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cnc lathe with c and y axis
turning diameter 460 mm
turning lenght 900 mm
spindle speed 4000 rpm
controlunit fanuc 18itb
with chip conveyor and 7 pieces power tools CNC LATHE WITH C AND Y AXIS TURNING DIAMETER 460 MM TURNING LENGHT 900 MM SPINDLE SPEED 4000 RPM CONTROLUNIT FANUC 18ITB WITH CHIP CONVEYOR AND 7 PIECES POWER TOOLS
Vendedor: Pyramid Mühendislik
Año de construcción: usado
Ubicación: Land-x-travel:1100 mm<br/>y-travel:610 mm<br/>z-travel:610 mm<br/>control:siemens 840 d <br/>table surface area:1200 x 500 mm<br/>power capacity - milling spindle: kw<br/>tool taper:sk 40 <br/>tool changer:24 pos.<br/>table load capacity:1000 kg<br/>turning speeds:8000 1/min<br/>rapid traverse:36 m/min<br/>total connected load:30 kva<br/>weight of the machine ca.:8,0 t<br/>dimensions of the machine ca.:3,40 x 2,00 x 2,40 m<br/><br/>3-axis machining center, internal coolant supply ( ikz )  pressure max.  25 bar chipconveyor direct measuring system x, y, z  approx. 21.000 h \ X-TRAVEL:1100 MM
Y-TRAVEL:610 MM
Z-TRAVEL:610 MM
CONTROL:SIEMENS 840 D
TABLE SURFACE AREA:1200 X 500 MM
POWER CAPACITY - MILLING SPINDLE: KW
TOOL TAPER:SK 40
TOOL CHANGER:24 POS.
TABLE LOAD CAPACITY:1000 KG
TURNING SPEEDS:8000 1/MIN
RAPID TRAVERSE:36 M/MIN
TOTAL CONNECTED LOAD:30 KVA
WEIGHT OF THE MACHINE CA.:8,0 T
DIMENSIONS OF THE MACHINE CA.:3,40 X 2,00 X 2,40 M

3-AXIS MACHINING CENTER, INTERNAL COOLANT SUPPLY ( IKZ ) PRESSURE MAX. 25 BAR CHIPCONVEYOR DIRECT MEASURING SYSTEM X, Y, Z APPROX. 21.000 H \"MACHINE ON\"
Vendedor: S+B Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-swing diameter 400 mm
turning diameter 250 mm
main spindle speed 5000 rpm
tool holder vdi25
control unit fanuc 31i
can be tested under power
linear scales in x axes
with lns at642 barfeeder SWING DIAMETER 400 MM TURNING DIAMETER 250 MM MAIN SPINDLE SPEED 5000 RPM TOOL HOLDER VDI25 CONTROL UNIT FANUC 31I CAN BE TESTED UNDER POWER LINEAR SCALES IN X AXES WITH LNS AT642 BARFEEDER
Vendedor: Pyramid Mühendislik
Año de construcción: usado
Ubicación: Land-x-travel:650 mm<br/>y-travel:500 mm<br/>z-travel:530 mm<br/>table-size:800 x 450 mm<br/>tool taper:sk 40 <br/>milling motor:11/16,5 kw<br/>spindle speeds::8000 1/min<br/>rapid traverse:24 m/min<br/>control:siemens 810 d shop mill<br/>numbers of positions in the tool changer:32 <br/>total power requirement:18 kw<br/>dimensions of the machine ca.:2,2 x 2,5 x 2,7 m<br/>weight of the machine ca.:4000 kg<br/><br/> X-TRAVEL:650 MM
Y-TRAVEL:500 MM
Z-TRAVEL:530 MM
TABLE-SIZE:800 X 450 MM
TOOL TAPER:SK 40
MILLING MOTOR:11/16,5 KW
SPINDLE SPEEDS::8000 1/MIN
RAPID TRAVERSE:24 M/MIN
CONTROL:SIEMENS 810 D SHOP MILL
NUMBERS OF POSITIONS IN THE TOOL CHANGER:32
TOTAL POWER REQUIREMENT:18 KW
DIMENSIONS OF THE MACHINE CA.:2,2 X 2,5 X 2,7 M
WEIGHT OF THE MACHINE CA.:4000 KG

Vendedor: Lutz Herpel Werkzeugmaschinenhandel
Año de construcción: usado
Ubicación: Land-table size 900x410 mm
x,y,z travels 760,460,460 mm
spindle speed 12.000 rpm
spindle taper sk40
number of tools in magazine 32
control unit siemens 840d
with chip conveyor TABLE SIZE 900X410 MM X,Y,Z TRAVELS 760,460,460 MM SPINDLE SPEED 12.000 RPM SPINDLE TAPER SK40 NUMBER OF TOOLS IN MAGAZINE 32 CONTROL UNIT SIEMENS 840D WITH CHIP CONVEYOR
Vendedor: Pyramid Mühendislik
Año de construcción: usado
Ubicación: Land-x-travel: 810 mm<br/>y-travel: 610 mm<br/>z-travel: 610 mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>siemens sinumerik 810d shop mill<br/>nc-dividing head<br/>electronical handwheel<br/>chip tank<br/>coolant device<br/><br/>technische daten / technical details:<br/>x-weg / x-travel    810    mm<br/>y-weg / y-travel    610    mm<br/>z-weg / z-travel    610    mm<br/>spindelaufnahme / spindle taper    sk 40    <br/>drehzahlbereich / spindle speed    8000    upm /rpm<br/>eilgang / rapid feed    24    m/min<br/>tischaufspannfläche / table clamping area    1000x600    mm<br/>werkzeugwechselmagazinplätze / number of tools in changer    24    <br/>antriebleistung spindel 40/100%ed / drive capacity spindle 40/100%ed    16,5 / <br/>11    kw<br/>gewicht ca. / weight    6000    kg<br/>technische daten, zubehör und beschreibung der maschine sind unverbindlich - <br/>technical data, accessories and description of the machine are not binding.<br/><br/><br/><br/><br/><br/><br/> X-TRAVEL: 810 MM
Y-TRAVEL: 610 MM
Z-TRAVEL: 610 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
SIEMENS SINUMERIK 810D SHOP MILL
NC-DIVIDING HEAD
ELECTRONICAL HANDWHEEL
CHIP TANK
COOLANT DEVICE

TECHNISCHE DATEN / TECHNICAL DETAILS:
X-WEG / X-TRAVEL 810 MM
Y-WEG / Y-TRAVEL 610 MM
Z-WEG / Z-TRAVEL 610 MM
SPINDELAUFNAHME / SPINDLE TAPER SK 40
DREHZAHLBEREICH / SPINDLE SPEED 8000 UPM /RPM
EILGANG / RAPID FEED 24 M/MIN
TISCHAUFSPANNFLäCHE / TABLE CLAMPING AREA 1000X600 MM
WERKZEUGWECHSELMAGAZINPLäTZE / NUMBER OF TOOLS IN CHANGER 24
ANTRIEBLEISTUNG SPINDEL 40/100%ED / DRIVE CAPACITY SPINDLE 40/100%ED 16,5 /
11 KW
GEWICHT CA. / WEIGHT 6000 KG
TECHNISCHE DATEN, ZUBEHöR UND BESCHREIBUNG DER MASCHINE SIND UNVERBINDLICH -
TECHNICAL DATA, ACCESSORIES AND DESCRIPTION OF THE MACHINE ARE NOT BINDING.






Vendedor: Gustav Schönberger GmbH
Año de construcción: usado
Ubicación: Land-table size 1200x500 mm
x travel 1000 mm
y travel 500 mm
z travel 570 mm
spindle speed 10.000 rpm
spindle taper sk40
number of tools 24
controller siemens 840d sl TABLE SIZE 1200X500 MM X TRAVEL 1000 MM Y TRAVEL 500 MM Z TRAVEL 570 MM SPINDLE SPEED 10.000 RPM SPINDLE TAPER SK40 NUMBER OF TOOLS 24 CONTROLLER SIEMENS 840D SL
Vendedor: Pyramid Mühendislik
Año de construcción: usado
Ubicación: Land-x-travel: 560 mm<br/>y-travel: 410 mm<br/>z-travel: 410 mm<br/>control: siemens <br/>main spindle::  <br/>turning speed range - main spindle: max. 12.000 min/-1<br/>power capacity - main spindel: 12 / 18 kw<br/>max. torque: 82 nm<br/>tool taper: sk 40 <br/>work table::  <br/>table surface area: 650 x 410 mm<br/>max. table load: 250 kg<br/>t-slots: 3x 14 mm<br/>tool-presetter::  <br/>number of toolpositions: 24 pos.<br/>max. tool diameter: 77 mm<br/>max. tool-dia with free toolbox: 125 mm<br/>max. tool length: 200 mm<br/>max. tool weight: 5,0 kg<br/>change time: ca. 1,3 sec<br/>feeds::  <br/>rapid traverse ( x / y / z ): 48 m/min<br/>total power requirement: ca. 30 kva<br/>weight of the machine ca.: 4,0 t<br/>dimensions of the machine ca.: 3,0 x 2,0 x 2,5 m<br/>documents:  <br/>chip-tray:  <br/>coolantsystem:  <br/>automatic tool changer:  <br/>test probe: marposs t25 <br/>cnc - machiningcenter vertical<br/>spinner - vc 560<br/><br/>- equipment: highspeed-spindle 25.000 min/-1<br/>- starting-up in 2008<br/>- only ca. 3.250h operating-hrs.<br/>- without vice<br/><br/><br/><br/><br/> X-TRAVEL: 560 MM
Y-TRAVEL: 410 MM
Z-TRAVEL: 410 MM
CONTROL: SIEMENS
MAIN SPINDLE::
TURNING SPEED RANGE - MAIN SPINDLE: MAX. 12.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 12 / 18 KW
MAX. TORQUE: 82 NM
TOOL TAPER: SK 40
WORK TABLE::
TABLE SURFACE AREA: 650 X 410 MM
MAX. TABLE LOAD: 250 KG
T-SLOTS: 3X 14 MM
TOOL-PRESETTER::
NUMBER OF TOOLPOSITIONS: 24 POS.
MAX. TOOL DIAMETER: 77 MM
MAX. TOOL-DIA WITH FREE TOOLBOX: 125 MM
MAX. TOOL LENGTH: 200 MM
MAX. TOOL WEIGHT: 5,0 KG
CHANGE TIME: CA. 1,3 SEC
FEEDS::
RAPID TRAVERSE ( X / Y / Z ): 48 M/MIN
TOTAL POWER REQUIREMENT: CA. 30 KVA
WEIGHT OF THE MACHINE CA.: 4,0 T
DIMENSIONS OF THE MACHINE CA.: 3,0 X 2,0 X 2,5 M
DOCUMENTS:
CHIP-TRAY:
COOLANTSYSTEM:
AUTOMATIC TOOL CHANGER:
TEST PROBE: MARPOSS T25
CNC - MACHININGCENTER VERTICAL
SPINNER - VC 560

- EQUIPMENT: HIGHSPEED-SPINDLE 25.000 MIN/-1
- STARTING-UP IN 2008
- ONLY CA. 3.250H OPERATING-HRS.
- WITHOUT VICE




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Precio: 60.000 €
Ubicación: Land-this machine has one turret and two spindle 
different configration than standard ttc300 models.buttom turret is available but not installed
swing diameter 400 mm
turning diameter 250 mm
main spindle speed 5000 rpm
tool holder vdi25
control unit siemens 840d sl
with 6 power tools
can be tested under power THIS MACHINE HAS ONE TURRET AND TWO SPINDLE DIFFERENT CONFIGRATION THAN STANDARD TTC300 MODELS.BUTTOM TURRET IS AVAILABLE BUT NOT INSTALLED SWING DIAMETER 400 MM TURNING DIAMETER 250 MM MAIN SPINDLE SPEED 5000 RPM TOOL HOLDER VDI25 CONTROL UNIT SIEMENS 840D SL WITH 6 POWER TOOLS CAN BE TESTED UNDER POWER
Vendedor: Pyramid Mühendislik
Año de construcción: usado
Ubicación: Land-x-travel: 1.020 mm<br/>y-travel: 610 mm<br/>z-travel: 610 mm<br/>control: siemens 810 d <br/>main spindle::  <br/>turning speed range - main spindle: 60 - 8.000 min/-1<br/>power capacity - main spindel: 12,3 / 18,5 kw<br/>max. torque: 177 nm<br/>tool taper: ( sk 40 ) <br/>spindle bearing diameter: 70 mm<br/>work table::  <br/>table surface area: 1.200 x 600 mm<br/>max. table load: 1.000 kg<br/>t-slots: 5x 18 x 125 mm<br/>tool-presetter::  <br/>number of toolpositions: 24 pos.<br/>max. tool diameter: 80 mm<br/>max. tool-dia with free toolbox: 120 mm<br/>max. tool length: 250 mm<br/>max. tool weight: 7,0 kg<br/>change time: ca. 6,5 sec<br/>feeds::  <br/>rapid traverse ( x / y / z ): 24 / 24 / 18 m/min<br/>total power requirement: ca. 30 kva<br/>weight of the machine ca.: 6,5 t<br/>dimensions of the machine ca.: 4,0 x 3,0 x 2,8 m<br/>documents:  <br/>chip-tray:  <br/>automatic tool changer:  <br/>elektr. hand wheel:  <br/>signal-light:  <br/>cnc - machiningcenter universal<br/>spinner - vc 1020<br/><br/><br/><br/><br/> X-TRAVEL: 1.020 MM
Y-TRAVEL: 610 MM
Z-TRAVEL: 610 MM
CONTROL: SIEMENS 810 D
MAIN SPINDLE::
TURNING SPEED RANGE - MAIN SPINDLE: 60 - 8.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 12,3 / 18,5 KW
MAX. TORQUE: 177 NM
TOOL TAPER: ( SK 40 )
SPINDLE BEARING DIAMETER: 70 MM
WORK TABLE::
TABLE SURFACE AREA: 1.200 X 600 MM
MAX. TABLE LOAD: 1.000 KG
T-SLOTS: 5X 18 X 125 MM
TOOL-PRESETTER::
NUMBER OF TOOLPOSITIONS: 24 POS.
MAX. TOOL DIAMETER: 80 MM
MAX. TOOL-DIA WITH FREE TOOLBOX: 120 MM
MAX. TOOL LENGTH: 250 MM
MAX. TOOL WEIGHT: 7,0 KG
CHANGE TIME: CA. 6,5 SEC
FEEDS::
RAPID TRAVERSE ( X / Y / Z ): 24 / 24 / 18 M/MIN
TOTAL POWER REQUIREMENT: CA. 30 KVA
WEIGHT OF THE MACHINE CA.: 6,5 T
DIMENSIONS OF THE MACHINE CA.: 4,0 X 3,0 X 2,8 M
DOCUMENTS:
CHIP-TRAY:
AUTOMATIC TOOL CHANGER:
ELEKTR. HAND WHEEL:
SIGNAL-LIGHT:
CNC - MACHININGCENTER UNIVERSAL
SPINNER - VC 1020




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Precio: used machinery auction RESALE 30.000 €
Ubicación: Land-cnc lathe,

12 x turret with driven tools, power chuck diameter: 300 mm, cnc control, fabr. siemens sinumerik, type: 840de, power-on hours: 6612, traverse paths: x 360, z900, y55/65 mm CNC LATHE, 12 X TURRET WITH DRIVEN TOOLS, POWER CHUCK DIAMETER: 300 MM, CNC CONTROL, FABR. SIEMENS SINUMERIK, TYPE: 840DE, POWER-ON HOURS: 6612, TRAVERSE PATHS: X 360, Z900, Y55/65 MM
Vendedor: Indutax GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 460 mm<br/>turning length: 900 mm<br/>control: fanuc 18 itb <br/>turning speeds: 4000 u/min<br/>chucking diameter: 210/250 mm<br/>output mainspindle: 30 kw<br/>bar passage: 52/77 mm<br/>c-axis:  <br/>hollow clamping cylinder:  <br/>3-jaw chuck: smw 210 <br/>3-jaw chuck: smw 250 <br/>tool turret: 12 fach<br/>tool taper: vdi 50 <br/>work piece power: 7,00 kw<br/>x-axis: 360 mm<br/>z-axis: 980 mm<br/>y-axis: -55 / +65 mm<br/>measuring probe: renishaw <br/>chip conveyor:  <br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> TURNING DIAMETER: 460 MM
TURNING LENGTH: 900 MM
CONTROL: FANUC 18 ITB
TURNING SPEEDS: 4000 U/MIN
CHUCKING DIAMETER: 210/250 MM
OUTPUT MAINSPINDLE: 30 KW
BAR PASSAGE: 52/77 MM
C-AXIS:
HOLLOW CLAMPING CYLINDER:
3-JAW CHUCK: SMW 210
3-JAW CHUCK: SMW 250
TOOL TURRET: 12 FACH
TOOL TAPER: VDI 50
WORK PIECE POWER: 7,00 KW
X-AXIS: 360 MM
Z-AXIS: 980 MM
Y-AXIS: -55 / +65 MM
MEASURING PROBE: RENISHAW
CHIP CONVEYOR:



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Año de construcción: usado
Precio: used machinery auction RESALE 70.000 €
Ubicación: Land-5-axes cnc-universal machining center,

spindle hours 1,998 hours, power-on hours 7.533 hours, tool changers, 32-fold, control, fabr. siemens sinumerik, type: 840 d, 15 "color screen m. integrated 2-axes cnc turning- and tilting table, with additional static left in the work area, travel: x: 1520 mm, y: 520 mm, w: 460 mm, iso-toolholders: 40, exhaust device for spindle cone, high speed automatic tool changer as a double arm changer, increased spindle speeds to max 12000 rpm, rapid traverse in xyz â?? axis increase to 48 m / min. 5-AXES CNC-UNIVERSAL MACHINING CENTER, SPINDLE HOURS 1,998 HOURS, POWER-ON HOURS 7.533 HOURS, TOOL CHANGERS, 32-FOLD, CONTROL, FABR. SIEMENS SINUMERIK, TYPE: 840 D, 15 "COLOR SCREEN M. INTEGRATED 2-AXES CNC TURNING- AND TILTING TABLE, WITH ADDITIONAL STATIC LEFT IN THE WORK AREA, TRAVEL: X: 1520 MM, Y: 520 MM, W: 460 MM, ISO-TOOLHOLDERS: 40, EXHAUST DEVICE FOR SPINDLE CONE, HIGH SPEED AUTOMATIC TOOL CHANGER AS A DOUBLE ARM CHANGER, INCREASED SPINDLE SPEEDS TO MAX 12000 RPM, RAPID TRAVERSE IN XYZ &ACIRC;?? AXIS INCREASE TO 48 M / MIN.
Vendedor: Indutax GmbH
Año de construcción: usado
Ubicación: Land-make: spinner <br/>year of manufacture: 2002 <br/>type of machine: vc 1300<br/>x-travel: 1.300 mm<br/>y-travel: 610 mm<br/>z-travel: 610 mm<br/>operating time: 22737<br/>tool holder: sk 40 <br/>max. table load: 1000 kg<br/>control: siemens 810d ? shop mill <br/>tool changer assembly: 24-fach <br/> MAKE: SPINNER
YEAR OF MANUFACTURE: 2002
TYPE OF MACHINE: VC 1300
X-TRAVEL: 1.300 MM
Y-TRAVEL: 610 MM
Z-TRAVEL: 610 MM
OPERATING TIME: 22737
TOOL HOLDER: SK 40
MAX. TABLE LOAD: 1000 KG
CONTROL: SIEMENS 810D ? SHOP MILL
TOOL CHANGER ASSEMBLY: 24-FACH
Vendedor: Erdmann Export-Import
Año de construcción: usado
Ubicación: Land-general information:
year 2019
control heidenhain tnc 128
traverse paths x 400 mm y 250 mm z 400 mm

table:
table dimensions: 600 x 320 mm
number, width and distance of the t-slots 5, 14 mm, 63 mm

axes:
feed rate of 0-2 m / min
rapid 0-5 m / min

horizontal spindle:
maximum speed 20-4,000 rpm
chuck sk40

vertical milling spindle:
max speed 30-5,500 rpm
chuck sk40
quill stroke 90 mm

dimensions and weight:
mass 1,775 mm x 1,380 mm x 1,900 mm
weight approx. 1.200 kg GENERAL INFORMATION: YEAR 2019 CONTROL HEIDENHAIN TNC 128 TRAVERSE PATHS X 400 MM Y 250 MM Z 400 MM TABLE: TABLE DIMENSIONS: 600 X 320 MM NUMBER, WIDTH AND DISTANCE OF THE T-SLOTS 5, 14 MM, 63 MM AXES: FEED RATE OF 0-2 M / MIN RAPID 0-5 M / MIN HORIZONTAL SPINDLE: MAXIMUM SPEED 20-4,000 RPM CHUCK SK40 VERTICAL MILLING SPINDLE: MAX SPEED 30-5,500 RPM CHUCK SK40 QUILL STROKE 90 MM DIMENSIONS AND WEIGHT: MASS 1,775 MM X 1,380 MM X 1,900 MM WEIGHT APPROX. 1.200 KG
Vendedor: CNC BOTE Johann Demmel
Año de construcción: usado
Ubicación: Land-turning diameter:500 mm<br/>turning length:900 mm<br/>control: <br/>travel -x axis:360 mm<br/>travel -y axis:+ 65 - 55 mm<br/>travel -z axis:900 - 1580 mm<br/>swing dia.:800 mm<br/>turning speeds:3200 1/min<br/>tool taper:vdi 50 <br/>tool turret:16-fach <br/>:12  <br/>total power requirement:33 kw<br/>weight of the machine ca.:8 to.<br/>dimensions of the machine ca.:4,0 x 2,0 x 2,0 m<br/><br/>cnc turning center,  spindle 1: max. rpm 3200 1/min chuck size dia. 250 or 315 mm spindle power: 24/ 33 kw torque 1: 450/ 630 nm  spindle 2: max. rpm: 5000 1/min chuck size: 210 mm spindle power: 15/19 kw torque: 95 / 121 nm  turret: 16 pos. tool taper: vdi 50 live tools: 16 max. live tool rpm: 4000 1/min  accessoriesr:  chipconveyor, tooleye, parts catcher, high pressure pump, linear scales in x-axis, 3-jaw chuck smw dia. 315mm, collet chuck hainbuch, div. toolholders (also live tools),  approx. 20.000 working hours TURNING DIAMETER:500 MM
TURNING LENGTH:900 MM
CONTROL:
TRAVEL -X AXIS:360 MM
TRAVEL -Y AXIS:+ 65 - 55 MM
TRAVEL -Z AXIS:900 - 1580 MM
SWING DIA.:800 MM
TURNING SPEEDS:3200 1/MIN
TOOL TAPER:VDI 50
TOOL TURRET:16-FACH
:12
TOTAL POWER REQUIREMENT:33 KW
WEIGHT OF THE MACHINE CA.:8 TO.
DIMENSIONS OF THE MACHINE CA.:4,0 X 2,0 X 2,0 M

CNC TURNING CENTER, SPINDLE 1: MAX. RPM 3200 1/MIN CHUCK SIZE DIA. 250 OR 315 MM SPINDLE POWER: 24/ 33 KW TORQUE 1: 450/ 630 NM SPINDLE 2: MAX. RPM: 5000 1/MIN CHUCK SIZE: 210 MM SPINDLE POWER: 15/19 KW TORQUE: 95 / 121 NM TURRET: 16 POS. TOOL TAPER: VDI 50 LIVE TOOLS: 16 MAX. LIVE TOOL RPM: 4000 1/MIN ACCESSORIESR: CHIPCONVEYOR, TOOLEYE, PARTS CATCHER, HIGH PRESSURE PUMP, LINEAR SCALES IN X-AXIS, 3-JAW CHUCK SMW DIA. 315MM, COLLET CHUCK HAINBUCH, DIV. TOOLHOLDERS (ALSO LIVE TOOLS), APPROX. 20.000 WORKING HOURS
Vendedor: S+B Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-general information:
year 2019
traverse paths x 310 mm y 170 mm z 340 mm
control heidenhain

table:
table dimensions 600 x 235 mm
number, width and distance of the t-slots 4, 12 h 7, 45 mm

axes:
feed 1,200 m / min

horizontal spindle:
maximum speed 2,000 rpm
chuck sk40
beitc27pgd

vertical milling spindle:
maximum speed 2,500 rpm
chuck sk40
quill stroke 70 mm

dimensions and weight:
mass 1,225 mm x 1.430 mm x 1,620 mm
weight approx. 750 kg GENERAL INFORMATION: YEAR 2019 TRAVERSE PATHS X 310 MM Y 170 MM Z 340 MM CONTROL HEIDENHAIN TABLE: TABLE DIMENSIONS 600 X 235 MM NUMBER, WIDTH AND DISTANCE OF THE T-SLOTS 4, 12 H 7, 45 MM AXES: FEED 1,200 M / MIN HORIZONTAL SPINDLE: MAXIMUM SPEED 2,000 RPM CHUCK SK40 BEITC27PGD VERTICAL MILLING SPINDLE: MAXIMUM SPEED 2,500 RPM CHUCK SK40 QUILL STROKE 70 MM DIMENSIONS AND WEIGHT: MASS 1,225 MM X 1.430 MM X 1,620 MM WEIGHT APPROX. 750 KG
Vendedor: CNC BOTE Johann Demmel
Año de construcción: usado
Ubicación: Land-dimensions (l x w x h) approx.: 7000  x 6300 x 6000 mm<br/>workpiece dimensions: 2400 x 1600 mm<br/>number of fan blowers                : 4 <br/>description: <h3>oteco optima 16-24-4 / 12-fm blasting machine</h3> the oteco blasting machine can work on parts with a maximum size of 2,4 x 1,6 m.<br> in the first section of the machine, the parts are blasted by four spinner wheels.<br> in the second section, the grit is vacuumed up.<br> DIMENSIONS (L X W X H) APPROX.: 7000 X 6300 X 6000 MM
WORKPIECE DIMENSIONS: 2400 X 1600 MM
NUMBER OF FAN BLOWERS : 4
DESCRIPTION:

OTECO OPTIMA 16-24-4 / 12-FM BLASTING MACHINE

THE OTECO BLASTING MACHINE CAN WORK ON PARTS WITH A MAXIMUM SIZE OF 2,4 X 1,6 M.
IN THE FIRST SECTION OF THE MACHINE, THE PARTS ARE BLASTED BY FOUR SPINNER WHEELS.
IN THE SECOND SECTION, THE GRIT IS VACUUMED UP.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-we have several spinners sb machines in stock
with siemens 810 and 840 control
for more details on request

changes and errors in the technical data and information and subject to prior sale!

WE HAVE SEVERAL SPINNERS SB MACHINES IN STOCK WITH SIEMENS 810 AND 840 CONTROL FOR MORE DETAILS ON REQUEST CHANGES AND ERRORS IN THE TECHNICAL DATA AND INFORMATION AND SUBJECT TO PRIOR SALE!
Vendedor: EN-Tec GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 1100 mm<br/>y-travel: 510 mm<br/>z-travel: 510 mm<br/>rapid traverse: 18/18/15 m/min<br/>control: siemens <br/>type: 840 d sl shop mill<br/>table surface area: 1200x600 mm<br/>workpiece weight: 1000 kg<br/>spindle turning speed - stepless: 8000 u/min<br/>spindle taper: iso: 40 <br/>tool changer: 24 <br/>cooling through the spindle: 20 bar<br/>total power requirement:  kw<br/>weight of the machine ca.: 8 t<br/>dimensions of the machine ca.: 3000x2350 m<br/><br/><br/><br/><br/> X-TRAVEL: 1100 MM
Y-TRAVEL: 510 MM
Z-TRAVEL: 510 MM
RAPID TRAVERSE: 18/18/15 M/MIN
CONTROL: SIEMENS
TYPE: 840 D SL SHOP MILL
TABLE SURFACE AREA: 1200X600 MM
WORKPIECE WEIGHT: 1000 KG
SPINDLE TURNING SPEED - STEPLESS: 8000 U/MIN
SPINDLE TAPER: ISO: 40
TOOL CHANGER: 24
COOLING THROUGH THE SPINDLE: 20 BAR
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 8 T
DIMENSIONS OF THE MACHINE CA.: 3000X2350 M




Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Ubicación: Land-used kitagawa roundtable mrm 320
control mac mini ih (m-code enabled)

faceplate diameter mm 320
max. spindle passage mm 105
center height 225 mm
max. speed min-1 25
weight kg 135 

useable for mazak - dmg - hermle - hedelius - spinner machines USED KITAGAWA ROUNDTABLE MRM 320 CONTROL MAC MINI IH (M-CODE ENABLED) FACEPLATE DIAMETER MM 320 MAX. SPINDLE PASSAGE MM 105 CENTER HEIGHT 225 MM MAX. SPEED MIN-1 25 WEIGHT KG 135 USEABLE FOR MAZAK - DMG - HERMLE - HEDELIUS - SPINNER MACHINES
Vendedor: GEMATEC GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 500 mm<br/>turning length: 800 mm<br/>control: siemens sinumerik<br/>rapid traverse: 15/24 mm/min<br/>weight of the machine ca.: 7 t<br/>dimensions of the machine ca.: 4,2 x 2,0 x 2,1 m<br/>cnc lathe spinner tc 77 mcy<br/><br/>traverse<br/>---------------------<br/>x-axis: 350mm<br/>z-axis: 1160/1840 mm<br/><br/>spindle<br/>--------------------<br/>max. speed: 3,200 rpm<br/>spindle nose: a8<br/>bar opening: 77 mm<br/>torque: 175/206 nm<br/><br/>revolver<br/>--------------------<br/>number of tool stations: 12<br/>toolholder: vdi50<br/>number of rotating tools: 12<br/>speed: 4,000 rpm<br/>torque (60%) 36 nm<br/><br/><br/><br/><br/> TURNING DIAMETER: 500 MM
TURNING LENGTH: 800 MM
CONTROL: SIEMENS SINUMERIK
RAPID TRAVERSE: 15/24 MM/MIN
WEIGHT OF THE MACHINE CA.: 7 T
DIMENSIONS OF THE MACHINE CA.: 4,2 X 2,0 X 2,1 M
CNC LATHE SPINNER TC 77 MCY

TRAVERSE
---------------------
X-AXIS: 350MM
Z-AXIS: 1160/1840 MM

SPINDLE
--------------------
MAX. SPEED: 3,200 RPM
SPINDLE NOSE: A8
BAR OPENING: 77 MM
TORQUE: 175/206 NM

REVOLVER
--------------------
NUMBER OF TOOL STATIONS: 12
TOOLHOLDER: VDI50
NUMBER OF ROTATING TOOLS: 12
SPEED: 4,000 RPM
TORQUE (60%) 36 NM




Vendedor: 5X Machines GmbH
Año de construcción: usado
Precio: 3.900 €
Ubicación: Land-used cycle bar feeder fmb 3000/1700 lms turbo

max. bar diameter mm 65
max. bar length mm 3,000

usable for mazak - emco - spinner - machine
    USED CYCLE BAR FEEDER FMB 3000/1700 LMS TURBO MAX. BAR DIAMETER MM 65 MAX. BAR LENGTH MM 3,000 USABLE FOR MAZAK - EMCO - SPINNER - MACHINE
Vendedor: GEMATEC GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 810 mm<br/>y-travel: 610 mm<br/>z-travel: 610 mm<br/>control: siemens 810d<br/>total power requirement: 30 kva<br/>weight of the machine ca.: 4 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> X-TRAVEL: 810 MM
Y-TRAVEL: 610 MM
Z-TRAVEL: 610 MM
CONTROL: SIEMENS 810D
TOTAL POWER REQUIREMENT: 30 KVA
WEIGHT OF THE MACHINE CA.: 4 T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: 5X Machines GmbH
Año de construcción: usado
Ubicación: Land-complete weee plastics recycling plant with electrostatic separators with:

- infeed bunker
- overband magnet
- conveyor
- eddy current separator
- inductive metal separator metall-kicker alrec-tec
- grinder zerma gsh500/600
- metal-marketing wet separator mm s3000-1000
- high efficiency friction washer/spinner
- sink/float tank 6m x 1,5 m
- high efficiency friction washer/spinner 2x
- zig zag dedusting
- drying silo 2x
- blow transport kongskilde 2x
- suction transport moretto 15x
- electrostatic metal/wood/rubber separator
- triboelectric (electrostatic) plastic separator 2x
- automated big bag filling station 6x
- electrical cabinets
- water treatment including flocculation unit
- closed water circuit
- salt water treatment

the plant is located in the netherland and is fully operational.

price on request.  COMPLETE WEEE PLASTICS RECYCLING PLANT WITH ELECTROSTATIC SEPARATORS WITH: - INFEED BUNKER - OVERBAND MAGNET - CONVEYOR - EDDY CURRENT SEPARATOR - INDUCTIVE METAL SEPARATOR METALL-KICKER ALREC-TEC - GRINDER ZERMA GSH500/600 - METAL-MARKETING WET SEPARATOR MM S3000-1000 - HIGH EFFICIENCY FRICTION WASHER/SPINNER - SINK/FLOAT TANK 6M X 1,5 M - HIGH EFFICIENCY FRICTION WASHER/SPINNER 2X - ZIG ZAG DEDUSTING - DRYING SILO 2X - BLOW TRANSPORT KONGSKILDE 2X - SUCTION TRANSPORT MORETTO 15X - ELECTROSTATIC METAL/WOOD/RUBBER SEPARATOR - TRIBOELECTRIC (ELECTROSTATIC) PLASTIC SEPARATOR 2X - AUTOMATED BIG BAG FILLING STATION 6X - ELECTRICAL CABINETS - WATER TREATMENT INCLUDING FLOCCULATION UNIT - CLOSED WATER CIRCUIT - SALT WATER TREATMENT THE PLANT IS LOCATED IN THE NETHERLAND AND IS FULLY OPERATIONAL. PRICE ON REQUEST.
Vendedor: AMA
Año de construcción: usado
Ubicación: Land-x-travel: 1020 mm<br/>y-travel: 580 mm<br/>z-travel: 560 mm<br/>control: siemens 810d powerline <br/>weight of the machine ca.: 11 t<br/>cnc steuerung siemens  810d powerline<br/>nc-schwenkrundtisch (4. und 5. achse)<br/>ikz<br/>40-fach werkzeugwechsler<br/>späneförderer<br/>kühlmitteleinrichtung<br/>vollkabine<br/>cnc control siemens  810d powerline<br/>nc-swivel-rotary table (4. and 5. axis)<br/>ikz<br/>40-fold tool changer<br/>chip conveyor<br/>coolant device<br/>full closed cabine<br/><br/>technische daten / technical details:<br/>x-weg längs / x-travel longitudinal    1020    mm<br/>y-weg quer / y-travel vertical    580    mm<br/>z-weg senkrecht / z-travel cross    560    mm<br/>spindelaufnahme / spindle taper    sk40    <br/>drehzahlbereich / spindle speed    bis 8000    upm /rpm<br/>eilgang / rapid feed    24    m/min<br/>anzahl der werkzeugplätze / no. of tool places atc    40    <br/>schwenkrundtischabmessungen / swivel-rotary table dimensions    500    mm<br/>gewicht der maschine ca. / weight    11000    kg<br/>technische daten, zubehör und beschreibung der maschine sind unverbindlich -<br/>technical data, accessories and description of the machine are not binding.<br/><br/><br/><br/><br/><br/> X-TRAVEL: 1020 MM
Y-TRAVEL: 580 MM
Z-TRAVEL: 560 MM
CONTROL: SIEMENS 810D POWERLINE
WEIGHT OF THE MACHINE CA.: 11 T
CNC STEUERUNG SIEMENS 810D POWERLINE
NC-SCHWENKRUNDTISCH (4. UND 5. ACHSE)
IKZ
40-FACH WERKZEUGWECHSLER
SPäNEFöRDERER
KüHLMITTELEINRICHTUNG
VOLLKABINE
CNC CONTROL SIEMENS 810D POWERLINE
NC-SWIVEL-ROTARY TABLE (4. AND 5. AXIS)
IKZ
40-FOLD TOOL CHANGER
CHIP CONVEYOR
COOLANT DEVICE
FULL CLOSED CABINE

TECHNISCHE DATEN / TECHNICAL DETAILS:
X-WEG LäNGS / X-TRAVEL LONGITUDINAL 1020 MM
Y-WEG QUER / Y-TRAVEL VERTICAL 580 MM
Z-WEG SENKRECHT / Z-TRAVEL CROSS 560 MM
SPINDELAUFNAHME / SPINDLE TAPER SK40
DREHZAHLBEREICH / SPINDLE SPEED BIS 8000 UPM /RPM
EILGANG / RAPID FEED 24 M/MIN
ANZAHL DER WERKZEUGPLäTZE / NO. OF TOOL PLACES ATC 40
SCHWENKRUNDTISCHABMESSUNGEN / SWIVEL-ROTARY TABLE DIMENSIONS 500 MM
GEWICHT DER MASCHINE CA. / WEIGHT 11000 KG
TECHNISCHE DATEN, ZUBEHöR UND BESCHREIBUNG DER MASCHINE SIND UNVERBINDLICH -
TECHNICAL DATA, ACCESSORIES AND DESCRIPTION OF THE MACHINE ARE NOT BINDING.





Vendedor: Gustav Schönberger GmbH
Año de construcción: usado
Ubicación: Land-high efficiency friction washer / centrifugal washer / spinner.


suitable for friction washing and/or drying of grinded plastics.


-power 22,0 kw
-throughput 1500 kg/h
-brand new, never used.


price on request.
   HIGH EFFICIENCY FRICTION WASHER / CENTRIFUGAL WASHER / SPINNER. SUITABLE FOR FRICTION WASHING AND/OR DRYING OF GRINDED PLASTICS. -POWER 22,0 KW -THROUGHPUT 1500 KG/H -BRAND NEW, NEVER USED. PRICE ON REQUEST.
Vendedor: AMA
Año de construcción: usado
Ubicación: Land-x-travel:760 mm<br/>y-travel:460 mm<br/>z-travel:460 mm<br/>control:tnc 620 heidenhain <br/>table-size:900 x 410 mm<br/>tool taper:sk 40 <br/>tool change unit:32 <br/>spindle turning speed - stepless:12.000 1/min<br/>max. torque on the spindle:64 / 108 nm<br/>spindle drive:17 / 10 kw<br/>rapid traverse:36 m/min<br/>total power requirement:20 kva<br/>weight of the machine ca.:3,5 t<br/>dimensions of the machine ca.:2,6 x 2,0 x 2,8 m<br/><br/>vertical machining center, - chipconveyor, - internal coolant supply 22 bar, 350l coolant box, - linear guideways, - direct measuring system,  approx. 15.000 h \ X-TRAVEL:760 MM
Y-TRAVEL:460 MM
Z-TRAVEL:460 MM
CONTROL:TNC 620 HEIDENHAIN
TABLE-SIZE:900 X 410 MM
TOOL TAPER:SK 40
TOOL CHANGE UNIT:32
SPINDLE TURNING SPEED - STEPLESS:12.000 1/MIN
MAX. TORQUE ON THE SPINDLE:64 / 108 NM
SPINDLE DRIVE:17 / 10 KW
RAPID TRAVERSE:36 M/MIN
TOTAL POWER REQUIREMENT:20 KVA
WEIGHT OF THE MACHINE CA.:3,5 T
DIMENSIONS OF THE MACHINE CA.:2,6 X 2,0 X 2,8 M

VERTICAL MACHINING CENTER, - CHIPCONVEYOR, - INTERNAL COOLANT SUPPLY 22 BAR, 350L COOLANT BOX, - LINEAR GUIDEWAYS, - DIRECT MEASURING SYSTEM, APPROX. 15.000 H \"MACHINE ON\", APPROX. 5.500 H \"SPINDLE ON\"
Vendedor: S+B Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-high efficiency friction washer / centrifugal washer / spinner.


improved model, easy and cheap maintenance, low downtime during replacement of wear parts.

suitable for friction washing and/or drying of grinded plastics.

-power 22,0 kw
-throughput 1500 kg/h
-solid and long lasting concept in stainless steel.
-brand new, never used.
-made in holland

price on request. HIGH EFFICIENCY FRICTION WASHER / CENTRIFUGAL WASHER / SPINNER. IMPROVED MODEL, EASY AND CHEAP MAINTENANCE, LOW DOWNTIME DURING REPLACEMENT OF WEAR PARTS. SUITABLE FOR FRICTION WASHING AND/OR DRYING OF GRINDED PLASTICS. -POWER 22,0 KW -THROUGHPUT 1500 KG/H -SOLID AND LONG LASTING CONCEPT IN STAINLESS STEEL. -BRAND NEW, NEVER USED. -MADE IN HOLLAND PRICE ON REQUEST.
Vendedor: AMA
Año de construcción: usado
Ubicación: Land-dimensions (l x w x h) approx.: 45000  x 15000 x 7500 mm<br/>workpiece dimensions: 2700 x 1400 mm<br/>max. piece weight: 20000 kg<br/>number of fan blowers                : 4 <br/>description: <h3>blasting and painting system</h3> <br> <h3>oteco blasting machine</h3> the oteco blasting machine can work on parts with a maximum size of 2,7 x 1,4 m. in the first section of the machine, the parts are blasted by four spinner wheels. in the second section, the grit is vacuumed up.<br> <br> <h3>garmat painting cabine</h3> through the 4 x 2,8 m big cabin door the parts can be transported back either by the overhead conveyor or by the forklift of the painting cabin.<br> <br> <h3>convoynort overhead conveyor</h3> the overhead conveyor can lift a maximum load of 2000 kg. the parts are transported to the conveyor by several lifting beams.<br> <br> <b>please have a look at the attached drawing that includes the dimensions of the system.</b><br> machines are still under power and are sold ex works! DIMENSIONS (L X W X H) APPROX.: 45000 X 15000 X 7500 MM
WORKPIECE DIMENSIONS: 2700 X 1400 MM
MAX. PIECE WEIGHT: 20000 KG
NUMBER OF FAN BLOWERS : 4
DESCRIPTION:

BLASTING AND PAINTING SYSTEM


OTECO BLASTING MACHINE

THE OTECO BLASTING MACHINE CAN WORK ON PARTS WITH A MAXIMUM SIZE OF 2,7 X 1,4 M. IN THE FIRST SECTION OF THE MACHINE, THE PARTS ARE BLASTED BY FOUR SPINNER WHEELS. IN THE SECOND SECTION, THE GRIT IS VACUUMED UP.

GARMAT PAINTING CABINE

THROUGH THE 4 X 2,8 M BIG CABIN DOOR THE PARTS CAN BE TRANSPORTED BACK EITHER BY THE OVERHEAD CONVEYOR OR BY THE FORKLIFT OF THE PAINTING CABIN.

CONVOYNORT OVERHEAD CONVEYOR

THE OVERHEAD CONVEYOR CAN LIFT A MAXIMUM LOAD OF 2000 KG. THE PARTS ARE TRANSPORTED TO THE CONVEYOR BY SEVERAL LIFTING BEAMS.

PLEASE HAVE A LOOK AT THE ATTACHED DRAWING THAT INCLUDES THE DIMENSIONS OF THE SYSTEM.
MACHINES ARE STILL UNDER POWER AND ARE SOLD EX WORKS!
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-high efficiency friction washer / centrifugal washer / spinner.


suitable for friction washing and/or drying of grinded plastics.

-power 22,0 kw
-throughput 1500 kg/h
-brand new, never used.

price on request.  HIGH EFFICIENCY FRICTION WASHER / CENTRIFUGAL WASHER / SPINNER. SUITABLE FOR FRICTION WASHING AND/OR DRYING OF GRINDED PLASTICS. -POWER 22,0 KW -THROUGHPUT 1500 KG/H -BRAND NEW, NEVER USED. PRICE ON REQUEST.
Vendedor: AMA
Año de construcción: usado
Ubicación: Land-high efficiency friction washer / centrifugal washer / spinner.

improved model, easy and cheap maintenance, low downtime during replacement of wear parts.


suitable for friction washing and/or drying of grinded plastics.

-power 22,0 kw
-throughput 1500 kg/h
-solid and long lasting concept in stainless steel.
-brand new, never used.
-made in holland

price on request.   HIGH EFFICIENCY FRICTION WASHER / CENTRIFUGAL WASHER / SPINNER. IMPROVED MODEL, EASY AND CHEAP MAINTENANCE, LOW DOWNTIME DURING REPLACEMENT OF WEAR PARTS. SUITABLE FOR FRICTION WASHING AND/OR DRYING OF GRINDED PLASTICS. -POWER 22,0 KW -THROUGHPUT 1500 KG/H -SOLID AND LONG LASTING CONCEPT IN STAINLESS STEEL. -BRAND NEW, NEVER USED. -MADE IN HOLLAND PRICE ON REQUEST.
Vendedor: AMA
Año de construcción: usado
Ubicación: Land-very good condition, including accessories.
operating system sinumerik 840 d sl
maximum processed diameter 500 mm
turning diameter over bed 800 mm
torque (between peaks) 800 mm
axis x 360 mm
z axis 900 mm
accelerated x / z axis movement 15/24 m / min.
maximum work-piece weight of 800 kg
spindle head a11
spindle power (100 / 40%) 22/33 kw
torque - transmission 1 175/263 nm
torque - transmission 2 700/1050 nm
tail stock sleeve diameter 110 mm
conical clamping mk4
pin hole hub 100 mm
thrust (at 30 kg / cm2) 850 dan
number of stations 12 (servo-revolver) axial, radial
vdi 50 tool clamping
speed 4000 rpm.
performance 5 / 9.4 kw
total weight 8.5 t
dimensions (conveyors) 4203 x 1980 x 2090 mm VERY GOOD CONDITION, INCLUDING ACCESSORIES. OPERATING SYSTEM SINUMERIK 840 D SL MAXIMUM PROCESSED DIAMETER 500 MM TURNING DIAMETER OVER BED 800 MM TORQUE (BETWEEN PEAKS) 800 MM AXIS X 360 MM Z AXIS 900 MM ACCELERATED X / Z AXIS MOVEMENT 15/24 M / MIN. MAXIMUM WORK-PIECE WEIGHT OF 800 KG SPINDLE HEAD A11 SPINDLE POWER (100 / 40%) 22/33 KW TORQUE - TRANSMISSION 1 175/263 NM TORQUE - TRANSMISSION 2 700/1050 NM TAIL STOCK SLEEVE DIAMETER 110 MM CONICAL CLAMPING MK4 PIN HOLE HUB 100 MM THRUST (AT 30 KG / CM2) 850 DAN NUMBER OF STATIONS 12 (SERVO-REVOLVER) AXIAL, RADIAL VDI 50 TOOL CLAMPING SPEED 4000 RPM. PERFORMANCE 5 / 9.4 KW TOTAL WEIGHT 8.5 T DIMENSIONS (CONVEYORS) 4203 X 1980 X 2090 MM
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Ubicación: Land-high efficiency friction washer / centrifugal washer / spinner.

improved model, easy and cheap maintenance, low downtime during replacement of wear parts.


suitable for friction washing and/or drying of grinded plastics.

-power 22,0 kw
-throughput 1500 kg/h
-solid and long lasting concept in stainless steel.
-brand new, never used.
-made in holland

price on request.
 HIGH EFFICIENCY FRICTION WASHER / CENTRIFUGAL WASHER / SPINNER. IMPROVED MODEL, EASY AND CHEAP MAINTENANCE, LOW DOWNTIME DURING REPLACEMENT OF WEAR PARTS. SUITABLE FOR FRICTION WASHING AND/OR DRYING OF GRINDED PLASTICS. -POWER 22,0 KW -THROUGHPUT 1500 KG/H -SOLID AND LONG LASTING CONCEPT IN STAINLESS STEEL. -BRAND NEW, NEVER USED. -MADE IN HOLLAND PRICE ON REQUEST.
Vendedor: AMA
Año de construcción: usado
Ubicación: Land-complete weee plastic recycling system with electrostatic separators with:

-inlet bunker
-excess ribbon magnet
-conveyor
-eddy current separator
-inductive metal separator metal kicker alrec-tec
-grinder zerma gsh500 / 600
-metal marketing wet separator s3000-1000 mm
-high friction wailer / spinner
-sink / fuel tank 6m x 1.5 m
-high friction wailer / spinner x 2
zick-zack dedusting
-dry silo 2 x
-blastransport kongskilde 2 x
-where moretto 15 x
-electrostatic metal / wooden / rubber separator
-triboelektrischer (electrostatic) kunststofftrenner 2 x
-automatic big bag filling station 6 x
-cabinets
-water treatment including flocking unit
-closed water circuit
-salt water treatment

the plant is located in the netherlands and is fully operational.

price on request.
 COMPLETE WEEE PLASTIC RECYCLING SYSTEM WITH ELECTROSTATIC SEPARATORS WITH: -INLET BUNKER -EXCESS RIBBON MAGNET -CONVEYOR -EDDY CURRENT SEPARATOR -INDUCTIVE METAL SEPARATOR METAL KICKER ALREC-TEC -GRINDER ZERMA GSH500 / 600 -METAL MARKETING WET SEPARATOR S3000-1000 MM -HIGH FRICTION WAILER / SPINNER -SINK / FUEL TANK 6M X 1.5 M -HIGH FRICTION WAILER / SPINNER X 2 ZICK-ZACK DEDUSTING -DRY SILO 2 X -BLASTRANSPORT KONGSKILDE 2 X -WHERE MORETTO 15 X -ELECTROSTATIC METAL / WOODEN / RUBBER SEPARATOR -TRIBOELEKTRISCHER (ELECTROSTATIC) KUNSTSTOFFTRENNER 2 X -AUTOMATIC BIG BAG FILLING STATION 6 X -CABINETS -WATER TREATMENT INCLUDING FLOCKING UNIT -CLOSED WATER CIRCUIT -SALT WATER TREATMENT THE PLANT IS LOCATED IN THE NETHERLANDS AND IS FULLY OPERATIONAL. PRICE ON REQUEST.
Vendedor: AMA
Año de construcción: usado
Ubicación: Land-year of manufacture 2004
control siemens 840 d
traverse paths x 400 mm z 400 mm
hours of operation 17.427 h

main spindle:
spindle speed 8,000 rpm
spindle head 100 mm bee3obzuh9
spindle bore 32 mm

counter spindle:
spindle speed 8,000 rpm
spindle head 100 mm spindle bore 32 mm

switching revolver:
number stations 16 x
powered 8
tool holder vdi16

dimensions and weight:
2,645 mm x 1,730 mm x 1.715 mm
weight approx. 2500 kg YEAR OF MANUFACTURE 2004 CONTROL SIEMENS 840 D TRAVERSE PATHS X 400 MM Z 400 MM HOURS OF OPERATION 17.427 H MAIN SPINDLE: SPINDLE SPEED 8,000 RPM SPINDLE HEAD 100 MM BEE3OBZUH9 SPINDLE BORE 32 MM COUNTER SPINDLE: SPINDLE SPEED 8,000 RPM SPINDLE HEAD 100 MM SPINDLE BORE 32 MM SWITCHING REVOLVER: NUMBER STATIONS 16 X POWERED 8 TOOL HOLDER VDI16 DIMENSIONS AND WEIGHT: 2,645 MM X 1,730 MM X 1.715 MM WEIGHT APPROX. 2500 KG
Vendedor: CNC BOTE Johann Demmel
Año de construcción: usado
Ubicación: Land-lathe cnc tc 600 65
manufacturer: spinner
year: 2013

control siemens... sinumerik 840 d
turning diameter... 600mm
turning length... 650mm
spindle bore... 65mm
x axis... 275mm
z axis... 700mm
spinldedrehzahl... 0-4000 rpm
magazine places... 16
vdi 30
swing diameter over support... 400mm
l x w x h... 2500 x 1600 x 2000
the weight of the machine... 5800kg
power of main engine... 5/10kw

in good condition, possible to try out under power. LATHE CNC TC 600 65 MANUFACTURER: SPINNER YEAR: 2013 CONTROL SIEMENS... SINUMERIK 840 D TURNING DIAMETER... 600MM TURNING LENGTH... 650MM SPINDLE BORE... 65MM X AXIS... 275MM Z AXIS... 700MM SPINLDEDREHZAHL... 0-4000 RPM MAGAZINE PLACES... 16 VDI 30 SWING DIAMETER OVER SUPPORT... 400MM L X W X H... 2500 X 1600 X 2000 THE WEIGHT OF THE MACHINE... 5800KG POWER OF MAIN ENGINE... 5/10KW IN GOOD CONDITION, POSSIBLE TO TRY OUT UNDER POWER.
Vendedor: Herr Radek Procházka
Año de construcción: usado
Ubicación: Land-built in 2007
control siemens 840 d sl shopturn
traverse paths x 200 mm z 515 mm operating hours 32.497 h
12 x turret
tool holder 30
spindle passage 42 mm
swing diameter 400 mm
weight approx. 3,000 kg

other facilities:
tailstock
chip conveyor
collet chuck BUILT IN 2007 CONTROL SIEMENS 840 D SL SHOPTURN TRAVERSE PATHS X 200 MM Z 515 MM OPERATING HOURS 32.497 H 12 X TURRET TOOL HOLDER 30 SPINDLE PASSAGE 42 MM SWING DIAMETER 400 MM WEIGHT APPROX. 3,000 KG OTHER FACILITIES: TAILSTOCK CHIP CONVEYOR COLLET CHUCK
Vendedor: CNC BOTE Johann Demmel
Año de construcción: usado
Ubicación: Land-x, y, z-way: 620 x 520 x 460 mm
the machine is in good technical condition, by prior agreement the possibility of testing. b = 360 â°, a = 11 â°, siemens 840, 9000 rpm. X, Y, Z-WAY: 620 X 520 X 460 MM THE MACHINE IS IN GOOD TECHNICAL CONDITION, BY PRIOR AGREEMENT THE POSSIBILITY OF TESTING. B = 360 &ACIRC;&DEG;, A = 11 &ACIRC;&DEG;, SIEMENS 840, 9000 RPM.
Vendedor: CEE-Machines
Año de construcción: usado
Ubicación: Land-x-travel: 1020mm, y-travel: 610mm, z-travel: 610mm, rotational speed: 8000/min, connected load: 18.5kw, number of tool slots: 24, tool cone: sk 40, controls: siemens 810de power line with shop mill.  X-TRAVEL: 1020MM, Y-TRAVEL: 610MM, Z-TRAVEL: 610MM, ROTATIONAL SPEED: 8000/MIN, CONNECTED LOAD: 18.5KW, NUMBER OF TOOL SLOTS: 24, TOOL CONE: SK 40, CONTROLS: SIEMENS 810DE POWER LINE WITH SHOP MILL.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-bar loader spinner servo - load 80 1200

material length max. 1200
material diameter 6-80
built in 2007
the offer is aimed exclusively at professionals in the sense of ⧠14bgb
no sales to private! BAR LOADER SPINNER SERVO - LOAD 80 1200 MATERIAL LENGTH MAX. 1200 MATERIAL DIAMETER 6-80 BUILT IN 2007 THE OFFER IS AIMED EXCLUSIVELY AT PROFESSIONALS IN THE SENSE OF &ACIRC;&SECT; 14BGB NO SALES TO PRIVATE!
Vendedor: Jens Kürschner Maschinenhandel
Año de construcción: usado
Ubicación: Land-cnc lathe spinner tc 46 - mc

siemens control

driven tools

turning diameter 298 mm

top width 580 mm

procedures:
x axis 221mm
z axis 590mm

main spindle 210nm at 40% ed
turret 12 pocket

of which powered 12 pieces
1 piece powered tool is supplied
tailstock mk 5
read about 27000 einschaltstunden
weight ca. 4200kg
the offer is aimed exclusively at professionals in the sense of ⧠14bgb
no sales to private! CNC LATHE SPINNER TC 46 - MC SIEMENS CONTROL DRIVEN TOOLS TURNING DIAMETER 298 MM TOP WIDTH 580 MM PROCEDURES: X AXIS 221MM Z AXIS 590MM MAIN SPINDLE 210NM AT 40% ED TURRET 12 POCKET OF WHICH POWERED 12 PIECES 1 PIECE POWERED TOOL IS SUPPLIED TAILSTOCK MK 5 READ ABOUT 27000 EINSCHALTSTUNDEN WEIGHT CA. 4200KG THE OFFER IS AIMED EXCLUSIVELY AT PROFESSIONALS IN THE SENSE OF &ACIRC;&SECT; 14BGB NO SALES TO PRIVATE!
Vendedor: Jens Kürschner Maschinenhandel
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)