1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Precio: 2.000.000 €
Ubicación: Land-complete late model power generation plant 

for immediate sale

plant consists of (4) identical 1997 6.5mw generator sets using wartsila vasa 18v32 ln diesel engines as prime movers driving abb hsg 900xs8 type generators generating 26mw total electrical power

including but not limited to the following systems: electric, fuel, lubricating oil, starting compressed air, control air, cooling water, charge air & exhaust gas, flew gas washing, steam, fire alarm & fire-fighting systems

station nominal output: 26 mw

generator nominal output: 8,125 kva 

generator voltage: 11kv+- 5%

frequency: 50 hz

auxiliary voltage: 415 v ac, 110 v dc

fuel type: heavy fuel oil (hfo)/diesel

manufactured 1997; installed and under power 1998

total current operational hours: 59,000+/-
	
in-plant, under power




 COMPLETE LATE MODEL POWER GENERATION PLANT FOR IMMEDIATE SALE PLANT CONSISTS OF (4) IDENTICAL 1997 6.5MW GENERATOR SETS USING WARTSILA VASA 18V32 LN DIESEL ENGINES AS PRIME MOVERS DRIVING ABB HSG 900XS8 TYPE GENERATORS GENERATING 26MW TOTAL ELECTRICAL POWER INCLUDING BUT NOT LIMITED TO THE FOLLOWING SYSTEMS: ELECTRIC, FUEL, LUBRICATING OIL, STARTING COMPRESSED AIR, CONTROL AIR, COOLING WATER, CHARGE AIR & EXHAUST GAS, FLEW GAS WASHING, STEAM, FIRE ALARM & FIRE-FIGHTING SYSTEMS STATION NOMINAL OUTPUT: 26 MW GENERATOR NOMINAL OUTPUT: 8,125 KVA GENERATOR VOLTAGE: 11KV+- 5% FREQUENCY: 50 HZ AUXILIARY VOLTAGE: 415 V AC, 110 V DC FUEL TYPE: HEAVY FUEL OIL (HFO)/DIESEL MANUFACTURED 1997; INSTALLED AND UNDER POWER 1998 TOTAL CURRENT OPERATIONAL HOURS: 59,000+/- IN-PLANT, UNDER POWER
Vendedor: Meco ltd.
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 5750; engine: doosan dp222lbf; accessories: drip pan, switching panel, volt meter, ampere meter, hertz meter, start battery, exhaust system; power type: 4000002 ; GROSS WEIGHT [KG]: 5750; ENGINE: DOOSAN DP222LBF; ACCESSORIES: DRIP PAN, SWITCHING PANEL, VOLT METER, AMPERE METER, HERTZ METER, START BATTERY, EXHAUST SYSTEM; POWER TYPE: 4000002
Vendedor: BREDENOORD
Año de construcción: usado
Precio: 3.450 €
Ubicación: Land-altendorf panel saw
type f 45
swiveling 45â°
motor power 7,5 kw
motor brake
table extension
extension table
guide fence
star delta
saw blade diameter of 450 mm
from the running of the school, good condition
checked ALTENDORF PANEL SAW TYPE F 45 SWIVELING 45° MOTOR POWER 7,5 KW MOTOR BRAKE TABLE EXTENSION EXTENSION TABLE GUIDE FENCE STAR DELTA SAW BLADE DIAMETER OF 450 MM FROM THE RUNNING OF THE SCHOOL, GOOD CONDITION CHECKED
Vendedor: Optimal Maschinen UG (haftungsbeschränkt)
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 2575; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 200 ; GROSS WEIGHT [KG]: 2575; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 200
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-x-travel: 440mm, y-travel: 695mm, z-travel: 390mm, measuring probe: tesastar-i, acceleration: 1730mm/s², rapid traverse: 350mm/s, compressed air supply: 4bar, compressed air consumption: 21l/min, software: pc-dmis pro, operating system: windows xp, length: 1160mm, width: 1280mm, height: 2320mm, weight: 395kg, including probe set, computer and 17 inch lcd screen.  X-TRAVEL: 440MM, Y-TRAVEL: 695MM, Z-TRAVEL: 390MM, MEASURING PROBE: TESASTAR-I, ACCELERATION: 1730MM/S², RAPID TRAVERSE: 350MM/S, COMPRESSED AIR SUPPLY: 4BAR, COMPRESSED AIR CONSUMPTION: 21L/MIN, SOFTWARE: PC-DMIS PRO, OPERATING SYSTEM: WINDOWS XP, LENGTH: 1160MM, WIDTH: 1280MM, HEIGHT: 2320MM, WEIGHT: 395KG, INCLUDING PROBE SET, COMPUTER AND 17 INCH LCD SCREEN.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 830; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 830; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-it is a used, reconditioned fortuna bun press gr. 4 (semiautomatic, 30-teilig) for sale. the sandwich press is fully functional in top condition, and runs very quietly. a new star of blade made of stainless steel was installed, no visible wear. the motor has been stored new and built a new main switch. the machine has been repainted. the weight of the machine is 40gr. -110 gr. each piece of dough (30-teilig). dough deposit: 1200gr. -3300gr. dough should be just pressed and cut a higher weight range is possible. incl. 3 x effect plates (active panels more upon request).
height: 1350mm, width: 580mm, depth: 580mm, weight: 330kg
power: approx. 0,74 kw
a video can be sent on request.

price on request.  IT IS A USED, RECONDITIONED FORTUNA BUN PRESS GR. 4 (SEMIAUTOMATIC, 30-TEILIG) FOR SALE. THE SANDWICH PRESS IS FULLY FUNCTIONAL IN TOP CONDITION, AND RUNS VERY QUIETLY. A NEW STAR OF BLADE MADE OF STAINLESS STEEL WAS INSTALLED, NO VISIBLE WEAR. THE MOTOR HAS BEEN STORED NEW AND BUILT A NEW MAIN SWITCH. THE MACHINE HAS BEEN REPAINTED. THE WEIGHT OF THE MACHINE IS 40GR. -110 GR. EACH PIECE OF DOUGH (30-TEILIG). DOUGH DEPOSIT: 1200GR. -3300GR. DOUGH SHOULD BE JUST PRESSED AND CUT A HIGHER WEIGHT RANGE IS POSSIBLE. INCL. 3 X EFFECT PLATES (ACTIVE PANELS MORE UPON REQUEST). HEIGHT: 1350MM, WIDTH: 580MM, DEPTH: 580MM, WEIGHT: 330KG POWER: APPROX. 0,74 KW A VIDEO CAN BE SENT ON REQUEST. PRICE ON REQUEST.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 830; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 830; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-diesel generator power plant 119 mw with wartsila 7x18v46 hfo

this 119 mw power plant (iso condition) was delivered by wartsila in year 2002, operation started in 2003 and it has 7 x 18v46 diesel engines running on heavy fuel oil (hfo) at 500 rpm coupled with abb made brushless synchronous 11 kv / 50 hz alternators. i has been in operated under ppa and engines have been operated around 60 000 hours in base load power production. this power plant is designed and build by wartsila utilizing their highly standardized functional module delivery. operation and maintenance works were carried out strictly in accordance with wartsila manuals. the plant was professionally dismantled in 2017 and before dismantling 60 000 hour major overhauled was carried out to all engines. during the operation no any unexpected breakdowns has happened. delivery contains complete functioning power plant equipment with 110 kv switchyard equipment. buildings and tanks can be discussed but are not a part of our standard offering.

main plant characteristics at current site conditions:

power output iso from alternators: 119 mw at 110 kv / 50 hz
engines: 7 x 18v46 - 500 rpm
alternators: abb amg 1600 ss12 dseb self-cooled, brushless, synchronous
power factor: 0.8
efficiency: 0.97 (at rated output, 50 hz and power factor 0.8)
voltage: 11 000 v, with adjustment range +5 - 10%
frequency: 50 hz +/-5%
fuel consumption gross: 8290 - 8330 kj/kwh (43.4 to 43.2 % efficiency)
lube oil consumption: 0.7 g/kwh
cooling system: closed loop radiator cooling
fuel oil: hfo viscosity max 380 cst / 50 °c   DIESEL GENERATOR POWER PLANT 119 MW WITH WARTSILA 7X18V46 HFO THIS 119 MW POWER PLANT (ISO CONDITION) WAS DELIVERED BY WARTSILA IN YEAR 2002, OPERATION STARTED IN 2003 AND IT HAS 7 X 18V46 DIESEL ENGINES RUNNING ON HEAVY FUEL OIL (HFO) AT 500 RPM COUPLED WITH ABB MADE BRUSHLESS SYNCHRONOUS 11 KV / 50 HZ ALTERNATORS. I HAS BEEN IN OPERATED UNDER PPA AND ENGINES HAVE BEEN OPERATED AROUND 60 000 HOURS IN BASE LOAD POWER PRODUCTION. THIS POWER PLANT IS DESIGNED AND BUILD BY WARTSILA UTILIZING THEIR HIGHLY STANDARDIZED FUNCTIONAL MODULE DELIVERY. OPERATION AND MAINTENANCE WORKS WERE CARRIED OUT STRICTLY IN ACCORDANCE WITH WARTSILA MANUALS. THE PLANT WAS PROFESSIONALLY DISMANTLED IN 2017 AND BEFORE DISMANTLING 60 000 HOUR MAJOR OVERHAULED WAS CARRIED OUT TO ALL ENGINES. DURING THE OPERATION NO ANY UNEXPECTED BREAKDOWNS HAS HAPPENED. DELIVERY CONTAINS COMPLETE FUNCTIONING POWER PLANT EQUIPMENT WITH 110 KV SWITCHYARD EQUIPMENT. BUILDINGS AND TANKS CAN BE DISCUSSED BUT ARE NOT A PART OF OUR STANDARD OFFERING. MAIN PLANT CHARACTERISTICS AT CURRENT SITE CONDITIONS: POWER OUTPUT ISO FROM ALTERNATORS: 119 MW AT 110 KV / 50 HZ ENGINES: 7 X 18V46 - 500 RPM ALTERNATORS: ABB AMG 1600 SS12 DSEB SELF-COOLED, BRUSHLESS, SYNCHRONOUS POWER FACTOR: 0.8 EFFICIENCY: 0.97 (AT RATED OUTPUT, 50 HZ AND POWER FACTOR 0.8) VOLTAGE: 11 000 V, WITH ADJUSTMENT RANGE +5 - 10% FREQUENCY: 50 HZ +/-5% FUEL CONSUMPTION GROSS: 8290 - 8330 KJ/KWH (43.4 TO 43.2 % EFFICIENCY) LUBE OIL CONSUMPTION: 0.7 G/KWH COOLING SYSTEM: CLOSED LOOP RADIATOR COOLING FUEL OIL: HFO VISCOSITY MAX 380 CST / 50 °C
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-for making rustic-square rolls, capacity approx. 7.000 pcs./h \r\ndoughweightrange 40 - 150 g - depends on the dough,\r\nstainless steel coverplates, righthand - operation\r\n2 flour duster at the infeed\r\nwithout electrical control pane FOR MAKING RUSTIC-SQUARE ROLLS, CAPACITY APPROX. 7.000 PCS./H \R\NDOUGHWEIGHTRANGE 40 - 150 G - DEPENDS ON THE DOUGH,\R\NSTAINLESS STEEL COVERPLATES, RIGHTHAND - OPERATION\R\N2 FLOUR DUSTER AT THE INFEED\R\NWITHOUT ELECTRICAL CONTROL PANE
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-complete pet bottle filling line 5.500 bph

this complete line has been built in 2006 and 2007 – installed in 2007 and has been taken out of service in 2016. the line has filling non carbonated soft drinks in pet bottles cap pco 28 mm. frequent maintenance is still taking place (greasing and startup / test runs). it is completely installed and in excellent condition. dry end of the line is being used for repacking purpose. line has run 3 different bottle formats (biggest 2.0 liters). spare parts (limited) are available, all documentation is available. the line is in good condition, installed and powered and can be tested.

make: various, see details
built: 2006/2007 – installed 2007
capacity: up to 5.500 bph
container handling: pet, 8 oz to 2.0 liters
condition: good
running hours: 16500 hrs
power / voltage: 460 v / 60 hz

equipment included:

- bohm pressure vessel – 900 liters – type 2360
- aquafine uv desinfection unit
- kaeser air dryer + 40 bar air compressor – thp212 + csdx 137, 3580 l/min, 75.0 kw
- barter co2 filter – ebco 1500
- ingersoll rand – 7bar compressor
- 2x lmi dosing pumps and meters
- evapco cooling tower – pmc-220e
- membrafe amoniak membrame cooling – rl500-3
- 2x vilter amoniak compressors – zl46
- 1x pentair water filter
- pumps & filters (various)
- kosme preform hopper
- kosme preform elevating conveyor pfa 1500, 0.37 kw, 50 hz
- kosme preform alignment infeed conveyor
- kosme ksb 4l – linear blow moulder – 4 heads, 68 kw, 50 hz
- mta chiller for kosme blow moulder, 6 bar, 11.6 kw, 220 v / 60 hz
- mesal air conveyors, linear curves, 9 motors
- mesal manual outfeed airconveyor to labeler (height adjustment)
- trine wrap around labeler + glue pump
- mesal manual airconveyor infeed from labeler (height adjustment)
- mesal mixer for csd
- amoniak cooler mesal + alfa laval phe (m10-bwfm, 10 bar, 34.89 l)
- mesal rinser,filler,capper (tribloc 30/30/10) – manual infeed of caps
- mesal bottle conveyors + ss conveyor belts
- visial lightbox full bottle inspection (manual)
- control panel for conveyors + filler danfoss drives
- vitz packers, mechanical wrap only packer for 12 packs + heat tunnel, ht 74 de
- outfeed conveyor (manual palletizing)
- optional = 2x ss sugar dissolving tanks
- optional = 2x ss storage buffer tanks    COMPLETE PET BOTTLE FILLING LINE 5.500 BPH THIS COMPLETE LINE HAS BEEN BUILT IN 2006 AND 2007 – INSTALLED IN 2007 AND HAS BEEN TAKEN OUT OF SERVICE IN 2016. THE LINE HAS FILLING NON CARBONATED SOFT DRINKS IN PET BOTTLES CAP PCO 28 MM. FREQUENT MAINTENANCE IS STILL TAKING PLACE (GREASING AND STARTUP / TEST RUNS). IT IS COMPLETELY INSTALLED AND IN EXCELLENT CONDITION. DRY END OF THE LINE IS BEING USED FOR REPACKING PURPOSE. LINE HAS RUN 3 DIFFERENT BOTTLE FORMATS (BIGGEST 2.0 LITERS). SPARE PARTS (LIMITED) ARE AVAILABLE, ALL DOCUMENTATION IS AVAILABLE. THE LINE IS IN GOOD CONDITION, INSTALLED AND POWERED AND CAN BE TESTED. MAKE: VARIOUS, SEE DETAILS BUILT: 2006/2007 – INSTALLED 2007 CAPACITY: UP TO 5.500 BPH CONTAINER HANDLING: PET, 8 OZ TO 2.0 LITERS CONDITION: GOOD RUNNING HOURS: 16500 HRS POWER / VOLTAGE: 460 V / 60 HZ EQUIPMENT INCLUDED: - BOHM PRESSURE VESSEL – 900 LITERS – TYPE 2360 - AQUAFINE UV DESINFECTION UNIT - KAESER AIR DRYER + 40 BAR AIR COMPRESSOR – THP212 + CSDX 137, 3580 L/MIN, 75.0 KW - BARTER CO2 FILTER – EBCO 1500 - INGERSOLL RAND – 7BAR COMPRESSOR - 2X LMI DOSING PUMPS AND METERS - EVAPCO COOLING TOWER – PMC-220E - MEMBRAFE AMONIAK MEMBRAME COOLING – RL500-3 - 2X VILTER AMONIAK COMPRESSORS – ZL46 - 1X PENTAIR WATER FILTER - PUMPS & FILTERS (VARIOUS) - KOSME PREFORM HOPPER - KOSME PREFORM ELEVATING CONVEYOR PFA 1500, 0.37 KW, 50 HZ - KOSME PREFORM ALIGNMENT INFEED CONVEYOR - KOSME KSB 4L – LINEAR BLOW MOULDER – 4 HEADS, 68 KW, 50 HZ - MTA CHILLER FOR KOSME BLOW MOULDER, 6 BAR, 11.6 KW, 220 V / 60 HZ - MESAL AIR CONVEYORS, LINEAR CURVES, 9 MOTORS - MESAL MANUAL OUTFEED AIRCONVEYOR TO LABELER (HEIGHT ADJUSTMENT) - TRINE WRAP AROUND LABELER + GLUE PUMP - MESAL MANUAL AIRCONVEYOR INFEED FROM LABELER (HEIGHT ADJUSTMENT) - MESAL MIXER FOR CSD - AMONIAK COOLER MESAL + ALFA LAVAL PHE (M10-BWFM, 10 BAR, 34.89 L) - MESAL RINSER,FILLER,CAPPER (TRIBLOC 30/30/10) – MANUAL INFEED OF CAPS - MESAL BOTTLE CONVEYORS + SS CONVEYOR BELTS - VISIAL LIGHTBOX FULL BOTTLE INSPECTION (MANUAL) - CONTROL PANEL FOR CONVEYORS + FILLER DANFOSS DRIVES - VITZ PACKERS, MECHANICAL WRAP ONLY PACKER FOR 12 PACKS + HEAT TUNNEL, HT 74 DE - OUTFEED CONVEYOR (MANUAL PALLETIZING) - OPTIONAL = 2X SS SUGAR DISSOLVING TANKS - OPTIONAL = 2X SS STORAGE BUFFER TANKS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-5-colour offset press
heidelberg
sm 102-5-p + l
installed in 2003
72 x 102 cm
only 180 million impressions
cp 2000 remote control center
axiscontrol
preset feeder and delivery.
alcolor vario, combistar can,
ink temperature control, water-cooled,
autoplate, all programs-controlled washers,
tandem washconcept
anilox coater, ir-dryer, drystar combination,
inkline canopen
cleanstar compact, eltex anti-static
extended delivery (x 2), air star,.
perfecting 1-4 / 2-3 / 5-0 5-COLOUR OFFSET PRESS HEIDELBERG SM 102-5-P + L INSTALLED IN 2003 72 X 102 CM ONLY 180 MILLION IMPRESSIONS CP 2000 REMOTE CONTROL CENTER AXISCONTROL PRESET FEEDER AND DELIVERY. ALCOLOR VARIO, COMBISTAR CAN, INK TEMPERATURE CONTROL, WATER-COOLED, AUTOPLATE, ALL PROGRAMS-CONTROLLED WASHERS, TANDEM WASHCONCEPT ANILOX COATER, IR-DRYER, DRYSTAR COMBINATION, INKLINE CANOPEN CLEANSTAR COMPACT, ELTEX ANTI-STATIC EXTENDED DELIVERY (X 2), AIR STAR,. PERFECTING 1-4 / 2-3 / 5-0
Vendedor: DRUPAMA KG (GmbH & Co. KG)
Año de construcción: usado
Ubicación: Land-weight approx.: 12500 kg<br/>dimensions (l x w x h) approx.: 4000 x 3000 x 3000 mm<br/>description: siemens 840 d, x axis 700 mm, y axis 360 mm, z axis 700 mm, table 500 x 500 mm, 40 tool places, tool holder hsk-a 63, WEIGHT APPROX.: 12500 KG
DIMENSIONS (L X W X H) APPROX.: 4000 X 3000 X 3000 MM
DESCRIPTION: SIEMENS 840 D, X AXIS 700 MM, Y AXIS 360 MM, Z AXIS 700 MM, TABLE 500 X 500 MM, 40 TOOL PLACES, TOOL HOLDER HSK-A 63,
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-heidelberg xl105-8p5(72 x 105cm), age c.2011, serial no.fs001300, circa 281 million, press centre, alcolor with vario dampening, preset plus feeder, preset plus delivery, autoplate, heidelberg staticstar, technotrans combistar (can) refrig with ink temp control (aircooled), alcosmart azr, ultrasonic two sheet detection, steel plate in feeder and delivery, heidelberg scrollstar, heidelberg cleanstar, heidelberg airstar, programmable roll/bla/imp. cyl. wash via cp2000, heidelberg powderstar ap500 duo plus powder spray, instant gate HEIDELBERG XL105-8P5(72 X 105CM), AGE C.2011, SERIAL NO.FS001300, CIRCA 281 MILLION, PRESS CENTRE, ALCOLOR WITH VARIO DAMPENING, PRESET PLUS FEEDER, PRESET PLUS DELIVERY, AUTOPLATE, HEIDELBERG STATICSTAR, TECHNOTRANS COMBISTAR (CAN) REFRIG WITH INK TEMP CONTROL (AIRCOOLED), ALCOSMART AZR, ULTRASONIC TWO SHEET DETECTION, STEEL PLATE IN FEEDER AND DELIVERY, HEIDELBERG SCROLLSTAR, HEIDELBERG CLEANSTAR, HEIDELBERG AIRSTAR, PROGRAMMABLE ROLL/BLA/IMP. CYL. WASH VIA CP2000, HEIDELBERG POWDERSTAR AP500 DUO PLUS POWDER SPRAY, INSTANT GATE
Vendedor: White Horse Machinery
Año de construcción: usado
Precio: used machinery auction RESALE 9.600 €
Ubicación: Land-weight approx.: 4880 kg<br/>dimensions (l x w x h) approx.: 3000 x 2000 x 2480 mm<br/>description: 3.5 t diesel forklift with 12473 h, 3600 mm lifting height, 2480 mm installation height, forks 1190 mm, super-elastic tyres, double pallet handle with sideshift, full cabin with heating apparatus, starter slight afterrun noises WEIGHT APPROX.: 4880 KG
DIMENSIONS (L X W X H) APPROX.: 3000 X 2000 X 2480 MM
DESCRIPTION: 3.5 T DIESEL FORKLIFT WITH 12473 H, 3600 MM LIFTING HEIGHT, 2480 MM INSTALLATION HEIGHT, FORKS 1190 MM, SUPER-ELASTIC TYRES, DOUBLE PALLET HANDLE WITH SIDESHIFT, FULL CABIN WITH HEATING APPARATUS, STARTER SLIGHT AFTERRUN NOISES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-incl. 2 flourer
weight range: 50-1.250 gr.
with self-correcting belt scale
with star cutter oiling
digital control
stainless steel cladding
hopper for approx. 50kg

on request we will send you an offer you!  INCL. 2 FLOURER WEIGHT RANGE: 50-1.250 GR. WITH SELF-CORRECTING BELT SCALE WITH STAR CUTTER OILING DIGITAL CONTROL STAINLESS STEEL CLADDING HOPPER FOR APPROX. 50KG ON REQUEST WE WILL SEND YOU AN OFFER YOU!
Vendedor: Bakers Good GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 15000; engine: cummins qst30g4; accessories: drip pan, switching panel, volt meter, ampere meter, hertz meter, start battery, exhaust system; power type: 4000002 ; GROSS WEIGHT [KG]: 15000; ENGINE: CUMMINS QST30G4; ACCESSORIES: DRIP PAN, SWITCHING PANEL, VOLT METER, AMPERE METER, HERTZ METER, START BATTERY, EXHAUST SYSTEM; POWER TYPE: 4000002
Vendedor: BREDENOORD
Año de construcción: usado
Precio: 1.800 €
Ubicación: Land-code: 0569
brand: bcr - italy
model: k 75 mri - ce standard 

automatic edge bander for pre-glued edges - ce  standard 

technical data:
edge thickness up to 1,5 mm
panel height 75 mm
end cutter  for automatic starting and cutting of the belt
group of 2 top / bottom trimmers
automatic panel feed driver 
single-phase power supply
heating time 3 min
overall dimensions:  mm 1600 x 650 x 1100 h
weight  kg 160



  CODE: 0569 BRAND: BCR - ITALY MODEL: K 75 MRI - CE STANDARD AUTOMATIC EDGE BANDER FOR PRE-GLUED EDGES - CE STANDARD TECHNICAL DATA: EDGE THICKNESS UP TO 1,5 MM PANEL HEIGHT 75 MM END CUTTER FOR AUTOMATIC STARTING AND CUTTING OF THE BELT GROUP OF 2 TOP / BOTTOM TRIMMERS AUTOMATIC PANEL FEED DRIVER SINGLE-PHASE POWER SUPPLY HEATING TIME 3 MIN OVERALL DIMENSIONS: MM 1600 X 650 X 1100 H WEIGHT KG 160
Vendedor: TOMESANI Srl
Año de construcción: usado
Ubicación: Land-x-travel: 400 mm<br/>y-travel: 250 mm<br/>workpiece height: 450 mm<br/>total power requirement: 8 kw<br/>weight of the machine ca.: 3500 kg<br/>dimensions of the machine ca.:  m<br/>h a u s e r                (switzerland)<br/>vertical precision jig grinder<br/>model    s 3 ? 111  with 2-axis digital read-out<br/>year    1982 but constantly reconditioned a. maintained      # 0210<br/>______________________________________________________________________<br/><br/>table size approx.                                          600 x 380    mm<br/>table load capacity approx.                                       300    kg<br/><br/>table travel longitudinal max.     (x)                            400    mm<br/>table travel cross max.            (y)                            250    mm<br/><br/>vertical adjustment of grinding head max.    (w)                  450    mm<br/>grinding spindle stroke max.                 (z)                  120    mm<br/>number of strokes of grinding head                             0,5-12    m/min<br/><br/>vertical distance between table/grinding spindle max.           0-500    mm<br/>throat of grinding spindle                                        340    mm<br/>conical grinding max.                                              16    °<br/>grinding-Ø bore approx.                                           230    mm<br/><br/>18 spindle speeds acc.to spindle motor infinitely <br/>variable                                                 4.500-80.000    rpm<br/><br/>fine feed in x/y and in z-axis                          2-1.500/6.000    mm/min<br/>planetary speed  (c)                                          5 - 250    rpm<br/><br/>total electrical load approx.    8,5 kw - 400 v ? 50    cycles<br/>weight approx.                 3.500 kg<br/><br/>accessories / special features:<br/><br/>?    elesta digital read-out  for the x and y-axes. <br/>?    refu frequency controller for adjusting stepless speeds on grinding spindle<br/>?    u-axis for control independant  automatic bore grinding up to a grinding <br/>     dia. of 300 mm<br/>     also with intermediate plates for large diameter and for conical grinding, <br/>     with automatic switch off . <br/>?    tool cabinet with various accessories, such as: clamping devices, <br/>     grinding pins, intermediate plates, centering microscope, centering device <br/>     with feeler, 4 dressing devices to mount it on table, square table <br/>     400 x 400 mm, coolant nozzles, collets, etc.<br/>?    sep. hydraulic system, sep. switch cabinet, sep. coolant device, sep. <br/>     control panel, etc.<br/>?    groove grinding facility with 3 different grinding wheel holders <br/>     (small/medium/large)<br/>?    original rotary table Ø 300 mm, contact meter for start the gringing cycle, <br/>     spare parts, etc.<br/><br/>condition   :    very good ? can be inspected in operation under current, <br/>delivery    :    ex stock ? as inspected       <br/>payment     :    net ? after completion of contract<br/><br/><br/><br/><br/><br/><br/><br/><br/> X-TRAVEL: 400 MM
Y-TRAVEL: 250 MM
WORKPIECE HEIGHT: 450 MM
TOTAL POWER REQUIREMENT: 8 KW
WEIGHT OF THE MACHINE CA.: 3500 KG
DIMENSIONS OF THE MACHINE CA.: M
H A U S E R (SWITZERLAND)
VERTICAL PRECISION JIG GRINDER
MODEL S 3 ? 111 WITH 2-AXIS DIGITAL READ-OUT
YEAR 1982 BUT CONSTANTLY RECONDITIONED A. MAINTAINED # 0210
______________________________________________________________________

TABLE SIZE APPROX. 600 X 380 MM
TABLE LOAD CAPACITY APPROX. 300 KG

TABLE TRAVEL LONGITUDINAL MAX. (X) 400 MM
TABLE TRAVEL CROSS MAX. (Y) 250 MM

VERTICAL ADJUSTMENT OF GRINDING HEAD MAX. (W) 450 MM
GRINDING SPINDLE STROKE MAX. (Z) 120 MM
NUMBER OF STROKES OF GRINDING HEAD 0,5-12 M/MIN

VERTICAL DISTANCE BETWEEN TABLE/GRINDING SPINDLE MAX. 0-500 MM
THROAT OF GRINDING SPINDLE 340 MM
CONICAL GRINDING MAX. 16 °
GRINDING-Ø BORE APPROX. 230 MM

18 SPINDLE SPEEDS ACC.TO SPINDLE MOTOR INFINITELY
VARIABLE 4.500-80.000 RPM

FINE FEED IN X/Y AND IN Z-AXIS 2-1.500/6.000 MM/MIN
PLANETARY SPEED (C) 5 - 250 RPM

TOTAL ELECTRICAL LOAD APPROX. 8,5 KW - 400 V ? 50 CYCLES
WEIGHT APPROX. 3.500 KG

ACCESSORIES / SPECIAL FEATURES:

? ELESTA DIGITAL READ-OUT FOR THE X AND Y-AXES.
? REFU FREQUENCY CONTROLLER FOR ADJUSTING STEPLESS SPEEDS ON GRINDING SPINDLE
? U-AXIS FOR CONTROL INDEPENDANT AUTOMATIC BORE GRINDING UP TO A GRINDING
DIA. OF 300 MM
ALSO WITH INTERMEDIATE PLATES FOR LARGE DIAMETER AND FOR CONICAL GRINDING,
WITH AUTOMATIC SWITCH OFF .
? TOOL CABINET WITH VARIOUS ACCESSORIES, SUCH AS: CLAMPING DEVICES,
GRINDING PINS, INTERMEDIATE PLATES, CENTERING MICROSCOPE, CENTERING DEVICE
WITH FEELER, 4 DRESSING DEVICES TO MOUNT IT ON TABLE, SQUARE TABLE
400 X 400 MM, COOLANT NOZZLES, COLLETS, ETC.
? SEP. HYDRAULIC SYSTEM, SEP. SWITCH CABINET, SEP. COOLANT DEVICE, SEP.
CONTROL PANEL, ETC.
? GROOVE GRINDING FACILITY WITH 3 DIFFERENT GRINDING WHEEL HOLDERS
(SMALL/MEDIUM/LARGE)
? ORIGINAL ROTARY TABLE Ø 300 MM, CONTACT METER FOR START THE GRINGING CYCLE,
SPARE PARTS, ETC.

CONDITION : VERY GOOD ? CAN BE INSPECTED IN OPERATION UNDER CURRENT,
DELIVERY : EX STOCK ? AS INSPECTED
PAYMENT : NET ? AFTER COMPLETION OF CONTRACT








Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-pet bottle filling line for beer and csd krones 22 000 bph with mixer

this complete pet bottle filling line was delivered by krones in year 2002 and it was in operation till 2015. the equipment is designed for beer and carbonated soft drinks and it has been filling the product in to 0.5, 1.5 and 2.0 liter pet bottles. line has a soft drink mixer. all equipment has siemens simatic s7 serie plc controls. line is complete with pet compressor and beverage mixer and it is still installed and powered and in good condition.

main characteristics of this line:
manufacturer: krones ag
capacity: 22 000 bph in 1.5 liter pet
20 000 bph in 2.0 liter pet
28 000 bph in 0.5 liter pet
operation started in year: 2002
operation stopped in year: 2015
container sizes used: 0.5, 1.5 and 2.0 liters
neck standard: pco 1810 - 28 mm
labels: film, hot glue, wrap around + front-back-neck
delivery package format: 3 x 4 shrink wrapped   PET BOTTLE FILLING LINE FOR BEER AND CSD KRONES 22 000 BPH WITH MIXER THIS COMPLETE PET BOTTLE FILLING LINE WAS DELIVERED BY KRONES IN YEAR 2002 AND IT WAS IN OPERATION TILL 2015. THE EQUIPMENT IS DESIGNED FOR BEER AND CARBONATED SOFT DRINKS AND IT HAS BEEN FILLING THE PRODUCT IN TO 0.5, 1.5 AND 2.0 LITER PET BOTTLES. LINE HAS A SOFT DRINK MIXER. ALL EQUIPMENT HAS SIEMENS SIMATIC S7 SERIE PLC CONTROLS. LINE IS COMPLETE WITH PET COMPRESSOR AND BEVERAGE MIXER AND IT IS STILL INSTALLED AND POWERED AND IN GOOD CONDITION. MAIN CHARACTERISTICS OF THIS LINE: MANUFACTURER: KRONES AG CAPACITY: 22 000 BPH IN 1.5 LITER PET 20 000 BPH IN 2.0 LITER PET 28 000 BPH IN 0.5 LITER PET OPERATION STARTED IN YEAR: 2002 OPERATION STOPPED IN YEAR: 2015 CONTAINER SIZES USED: 0.5, 1.5 AND 2.0 LITERS NECK STANDARD: PCO 1810 - 28 MM LABELS: FILM, HOT GLUE, WRAP AROUND + FRONT-BACK-NECK DELIVERY PACKAGE FORMAT: 3 X 4 SHRINK WRAPPED
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 180 €
Ubicación: Land-weight approx.: 90 kg<br/>dimensions (l x w x h) approx.: 850 x 450 x 1820 mm<br/>description: throat depth 352 mm, cutting height max. 300 mm, table size 450 x 450 mm, with rip fence, output 750 w, 3-phase motor, material cutting thicknesses see table, reel diameter 352 mm WEIGHT APPROX.: 90 KG
DIMENSIONS (L X W X H) APPROX.: 850 X 450 X 1820 MM
DESCRIPTION: THROAT DEPTH 352 MM, CUTTING HEIGHT MAX. 300 MM, TABLE SIZE 450 X 450 MM, WITH RIP FENCE, OUTPUT 750 W, 3-PHASE MOTOR, MATERIAL CUTTING THICKNESSES SEE TABLE, REEL DIAMETER 352 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cassette for warehouse, about 1,539 cassettes, cassette length 6, 50 m, 3, 000 kg/kasstte - used -:
 
price on request!
 
manufacturer: fehr
year of construction: 2001
cassettes ges. 1,539 units
specification
1 electrically operated double table long good stack machine, automatically controlled, for the storage and retrieval of for good material, with the help of cassettes
technical data:
capacity 2x3000kg
bottom load table position above ground 700 mm
top load table position above ground 12110 mm
room height 13'450 mm
lifting speed 35 m / min
travel speed 80 m / min
pull-out speed 85 m / min
operating voltage, three-phase 400 v / 50 hz
control voltage 230 v / 50 hz
24 v dc
cassette type internal dimensions (wxhxl) a 520 x 270 x 6500 mm
type b 520 x 520 x 6500 mm
device performance at 100% load 46 ds / h
according to fem based on ub-3000 9.851
pull-out force on the cassette gripper (20% of the payload plus cartridge weight)
 
control automatically arranged using an automatic control over operating terminal, at the camp office
1. 1 double-sided track, length approx 29 m
to hang up on the concrete floor, consisting of:
the two rails of a 55, with the shocks, complete with attachment fittings and the limit stops. the rails are with fade-free special grout under poured.
2. 1 longitudinal-power supply, length approx 29 m, consisting of:
vahle plastic conductor line, with guard, complete with the mounting brackets.
3. 1 long goods stacking devices, consisting of:
camp 2 head straps welded design, with the chassis, this consisting of wã¤lzge controlled from the two engines with shaft mounted gearboxes built-on, as well as the 4 - crane wheels, with leadership roles, running laterally on the road,
2 columns in welded box construction, with the guides for the lifters from material performed st 52.3, screwed on the head straps, including the stiffening frame, as well as a ladder of descent,.
1 pallet truck, consisting of: the steel construction with the necessary rubber buffers for the two hã¶henend positions, the roller bearing support and leadership roles, the double cassette table with glides, the extractor, the centering with side guard rails to complete the box, complete with the runners for the gripper, the drive motors, sprockets, shafts, chains and electrical installation,
controls the horizontal, which â«fachbelegtâ».
as a hoist is used:
1 controlled engine
with intermediate gear (designed according to fem 3 m) and drum includes cords and ball-bearing pulleys; security 12, with double-grooved rope drum, dust-protected bearings drum bearing,
rope pulleys conditions according to din 15020.
4. electrical installation, comprising:
-the special cables, including all required terminal boxes, connecting cables fixed installed on the device
-the flexible power supply in cable caterpillar to the trucks,
-completely wired cabinet incl. contactor and the necessary controls, the mushroom-head pushbutton, which shuts off the main contactor (red mushroom can be rotated), switch with push button, key switch
-the two key selector switches, which are used for the pre-selection of the operating modes â«tip operation/automatic modeâ»,
the limit switches for the limitation of the lifting and moving
-the reciprocal locking of lifting and suspension compared to the ausziehvorâ¬
-direction, the laterally mounted clamping wires to the continuous control of the speed profile
-the profile control, which monitors whether the space between the shelf and device is free,
-the output fuse, which prevents that cassettes in a free space be outsourced,
-excess height control, which prevents a training and storage of high-loaded cartridges,
-the control of tape position on the table,
-the fault indicator in the control panel on the lift truck,
-the operating hour counters for driving and lifting mechanism
displacement measuring systems
the wear-free optical measuring system guarantees maximum service life and precise way capture of the x - and y-coordinates. the way capture of the two gripper through the absolute value encoder is located in the millimetre range. both systems deliver the absolutely correct readings again even after a power failure. thus it takes no movements for repositioning and the device starts working immediately without delay.
driving behavior
driving in the x and y axes is such that at the maximum possible speed infinitely variable over short or long distances optimal speed curves are driven. the behavior of the device dimensions at various distances is taken into account and flows as a control variable with a. the pendulum effect is compensated with counteract the driving curve characteristics,
learning functions
the computer software is so forward-looking that hardly a parameterization of various sizes must be done by the programmer. the software adaptation to different design types of device and storage compartments is done through the learning and self-learning onsite. following learning processes take place during commissioning on site:
-self-learning of the xy-driving behavior
-learning of the gripper behavior
-learning the transfer and recording places of the periphery
self learning the topology of all storage compartments of different arrangement and sizes
operating modes
-jog
the long good stacking device in the direction of travel, the truck and the two pull-out devices can be moved with the control buttons.
-semi automatic (automatic start-up), arranged in the stationary cupboard.
with the hand-held micro terminal, various movements are run separately or in combination automatically:
-driving horizontal
vertical lifting/lowering
-pull cassette
-slide tape
-positioning in front of the nearest
option
pc-cabinet for m fs calculator
execution: wxhxd 600 x 1900 x 600 mm
4-field 17 "monitor field of vision
part of front door for computer unit
integrated keyboard tray
storage compartment with removable rails
socket 100 mm
(ii) peripheral components, including:
1 1 carousel ka-3000 gr gr
for cassettes with rods
technical data:
capacity/capacity 3000 kg
number of pitches 4
conveying speed along 24 m / min
cross conveyor speed 40 m / min
height from top of floor 700 mm
operating voltage 400 v / 50 hz
control voltage 230 v / 50 hz
the cartridge space tracking via the automatic control. the carousel consists in particular of:
outsourcing train, consisting of:
-the steel foot plates and anchors, directly on the ground turned off and integrated into the shelf, suitable for the installation of the required mechanical parts
-the spezialgleitem, as well as the lateral guide
-the gripper mechanism, which contains the tape and transported to the next position positively
the gear motor with chain, the sprocket wheels and the chain guide
cross conveyor belt, comprising;
-two cassette courses, one of them as work provided
-the steel construction incl. foot plates and anchors, placed directly on the floor, suitable for the installation of the required mechanical parts
-the special gliders, as well as the lateral guide
-the querverschiebebalken as a driver for the cassettes
-the drive motor with the required drive elements
-the mechanical preparations for the load cells installation at the workplace
storage car, running such as paging railway
electrical control consisting of:
-the control panel with push buttons for all individual movements, including on/off button and emergency push button
-the position and control switches
-power and control supply
-firmly installed control cabinets with built-in control
-the necessary cables, as well as the internal wiring
the safety light barrier incl. mounting brackets, which perceives the person protection during cartridge movement
 
condition: used, the last maintenance was performed in 2017, shortly after it was mined professionally, so that it can be rebuilt at any time. the company which has degraded the plant could perform the installation.
available: available now
location: nuremberg CASSETTE FOR WAREHOUSE, ABOUT 1,539 CASSETTES, CASSETTE LENGTH 6, 50 M, 3, 000 KG/KASSTTE - USED -: PRICE ON REQUEST! MANUFACTURER: FEHR YEAR OF CONSTRUCTION: 2001 CASSETTES GES. 1,539 UNITS SPECIFICATION 1 ELECTRICALLY OPERATED DOUBLE TABLE LONG GOOD STACK MACHINE, AUTOMATICALLY CONTROLLED, FOR THE STORAGE AND RETRIEVAL OF FOR GOOD MATERIAL, WITH THE HELP OF CASSETTES TECHNICAL DATA: CAPACITY 2X3000KG BOTTOM LOAD TABLE POSITION ABOVE GROUND 700 MM TOP LOAD TABLE POSITION ABOVE GROUND 12110 MM ROOM HEIGHT 13'450 MM LIFTING SPEED 35 M / MIN TRAVEL SPEED 80 M / MIN PULL-OUT SPEED 85 M / MIN OPERATING VOLTAGE, THREE-PHASE 400 V / 50 HZ CONTROL VOLTAGE 230 V / 50 HZ 24 V DC CASSETTE TYPE INTERNAL DIMENSIONS (WXHXL) A 520 X 270 X 6500 MM TYPE B 520 X 520 X 6500 MM DEVICE PERFORMANCE AT 100% LOAD 46 DS / H ACCORDING TO FEM BASED ON UB-3000 9.851 PULL-OUT FORCE ON THE CASSETTE GRIPPER (20% OF THE PAYLOAD PLUS CARTRIDGE WEIGHT) CONTROL AUTOMATICALLY ARRANGED USING AN AUTOMATIC CONTROL OVER OPERATING TERMINAL, AT THE CAMP OFFICE 1. 1 DOUBLE-SIDED TRACK, LENGTH APPROX 29 M TO HANG UP ON THE CONCRETE FLOOR, CONSISTING OF: THE TWO RAILS OF A 55, WITH THE SHOCKS, COMPLETE WITH ATTACHMENT FITTINGS AND THE LIMIT STOPS. THE RAILS ARE WITH FADE-FREE SPECIAL GROUT UNDER POURED. 2. 1 LONGITUDINAL-POWER SUPPLY, LENGTH APPROX 29 M, CONSISTING OF: VAHLE PLASTIC CONDUCTOR LINE, WITH GUARD, COMPLETE WITH THE MOUNTING BRACKETS. 3. 1 LONG GOODS STACKING DEVICES, CONSISTING OF: CAMP 2 HEAD STRAPS WELDED DESIGN, WITH THE CHASSIS, THIS CONSISTING OF W&ATILDE;&CURREN;LZGE CONTROLLED FROM THE TWO ENGINES WITH SHAFT MOUNTED GEARBOXES BUILT-ON, AS WELL AS THE 4 - CRANE WHEELS, WITH LEADERSHIP ROLES, RUNNING LATERALLY ON THE ROAD, 2 COLUMNS IN WELDED BOX CONSTRUCTION, WITH THE GUIDES FOR THE LIFTERS FROM MATERIAL PERFORMED ST 52.3, SCREWED ON THE HEAD STRAPS, INCLUDING THE STIFFENING FRAME, AS WELL AS A LADDER OF DESCENT,. 1 PALLET TRUCK, CONSISTING OF: THE STEEL CONSTRUCTION WITH THE NECESSARY RUBBER BUFFERS FOR THE TWO H&ATILDE;&PARA;HENEND POSITIONS, THE ROLLER BEARING SUPPORT AND LEADERSHIP ROLES, THE DOUBLE CASSETTE TABLE WITH GLIDES, THE EXTRACTOR, THE CENTERING WITH SIDE GUARD RAILS TO COMPLETE THE BOX, COMPLETE WITH THE RUNNERS FOR THE GRIPPER, THE DRIVE MOTORS, SPROCKETS, SHAFTS, CHAINS AND ELECTRICAL INSTALLATION, CONTROLS THE HORIZONTAL, WHICH &ACIRC;&LAQUO;FACHBELEGT&ACIRC;&RAQUO;. AS A HOIST IS USED: 1 CONTROLLED ENGINE WITH INTERMEDIATE GEAR (DESIGNED ACCORDING TO FEM 3 M) AND DRUM INCLUDES CORDS AND BALL-BEARING PULLEYS; SECURITY 12, WITH DOUBLE-GROOVED ROPE DRUM, DUST-PROTECTED BEARINGS DRUM BEARING, ROPE PULLEYS CONDITIONS ACCORDING TO DIN 15020. 4. ELECTRICAL INSTALLATION, COMPRISING: -THE SPECIAL CABLES, INCLUDING ALL REQUIRED TERMINAL BOXES, CONNECTING CABLES FIXED INSTALLED ON THE DEVICE -THE FLEXIBLE POWER SUPPLY IN CABLE CATERPILLAR TO THE TRUCKS, -COMPLETELY WIRED CABINET INCL. CONTACTOR AND THE NECESSARY CONTROLS, THE MUSHROOM-HEAD PUSHBUTTON, WHICH SHUTS OFF THE MAIN CONTACTOR (RED MUSHROOM CAN BE ROTATED), SWITCH WITH PUSH BUTTON, KEY SWITCH -THE TWO KEY SELECTOR SWITCHES, WHICH ARE USED FOR THE PRE-SELECTION OF THE OPERATING MODES &ACIRC;&LAQUO;TIP OPERATION/AUTOMATIC MODE&ACIRC;&RAQUO;, THE LIMIT SWITCHES FOR THE LIMITATION OF THE LIFTING AND MOVING -THE RECIPROCAL LOCKING OF LIFTING AND SUSPENSION COMPARED TO THE AUSZIEHVOR&ACIRC;&NOT; -DIRECTION, THE LATERALLY MOUNTED CLAMPING WIRES TO THE CONTINUOUS CONTROL OF THE SPEED PROFILE -THE PROFILE CONTROL, WHICH MONITORS WHETHER THE SPACE BETWEEN THE SHELF AND DEVICE IS FREE, -THE OUTPUT FUSE, WHICH PREVENTS THAT CASSETTES IN A FREE SPACE BE OUTSOURCED, -EXCESS HEIGHT CONTROL, WHICH PREVENTS A TRAINING AND STORAGE OF HIGH-LOADED CARTRIDGES, -THE CONTROL OF TAPE POSITION ON THE TABLE, -THE FAULT INDICATOR IN THE CONTROL PANEL ON THE LIFT TRUCK, -THE OPERATING HOUR COUNTERS FOR DRIVING AND LIFTING MECHANISM DISPLACEMENT MEASURING SYSTEMS THE WEAR-FREE OPTICAL MEASURING SYSTEM GUARANTEES MAXIMUM SERVICE LIFE AND PRECISE WAY CAPTURE OF THE X - AND Y-COORDINATES. THE WAY CAPTURE OF THE TWO GRIPPER THROUGH THE ABSOLUTE VALUE ENCODER IS LOCATED IN THE MILLIMETRE RANGE. BOTH SYSTEMS DELIVER THE ABSOLUTELY CORRECT READINGS AGAIN EVEN AFTER A POWER FAILURE. THUS IT TAKES NO MOVEMENTS FOR REPOSITIONING AND THE DEVICE STARTS WORKING IMMEDIATELY WITHOUT DELAY. DRIVING BEHAVIOR DRIVING IN THE X AND Y AXES IS SUCH THAT AT THE MAXIMUM POSSIBLE SPEED INFINITELY VARIABLE OVER SHORT OR LONG DISTANCES OPTIMAL SPEED CURVES ARE DRIVEN. THE BEHAVIOR OF THE DEVICE DIMENSIONS AT VARIOUS DISTANCES IS TAKEN INTO ACCOUNT AND FLOWS AS A CONTROL VARIABLE WITH A. THE PENDULUM EFFECT IS COMPENSATED WITH COUNTERACT THE DRIVING CURVE CHARACTERISTICS, LEARNING FUNCTIONS THE COMPUTER SOFTWARE IS SO FORWARD-LOOKING THAT HARDLY A PARAMETERIZATION OF VARIOUS SIZES MUST BE DONE BY THE PROGRAMMER. THE SOFTWARE ADAPTATION TO DIFFERENT DESIGN TYPES OF DEVICE AND STORAGE COMPARTMENTS IS DONE THROUGH THE LEARNING AND SELF-LEARNING ONSITE. FOLLOWING LEARNING PROCESSES TAKE PLACE DURING COMMISSIONING ON SITE: -SELF-LEARNING OF THE XY-DRIVING BEHAVIOR -LEARNING OF THE GRIPPER BEHAVIOR -LEARNING THE TRANSFER AND RECORDING PLACES OF THE PERIPHERY SELF LEARNING THE TOPOLOGY OF ALL STORAGE COMPARTMENTS OF DIFFERENT ARRANGEMENT AND SIZES OPERATING MODES -JOG THE LONG GOOD STACKING DEVICE IN THE DIRECTION OF TRAVEL, THE TRUCK AND THE TWO PULL-OUT DEVICES CAN BE MOVED WITH THE CONTROL BUTTONS. -SEMI AUTOMATIC (AUTOMATIC START-UP), ARRANGED IN THE STATIONARY CUPBOARD. WITH THE HAND-HELD MICRO TERMINAL, VARIOUS MOVEMENTS ARE RUN SEPARATELY OR IN COMBINATION AUTOMATICALLY: -DRIVING HORIZONTAL VERTICAL LIFTING/LOWERING -PULL CASSETTE -SLIDE TAPE -POSITIONING IN FRONT OF THE NEAREST OPTION PC-CABINET FOR M FS CALCULATOR EXECUTION: WXHXD 600 X 1900 X 600 MM 4-FIELD 17 "MONITOR FIELD OF VISION PART OF FRONT DOOR FOR COMPUTER UNIT INTEGRATED KEYBOARD TRAY STORAGE COMPARTMENT WITH REMOVABLE RAILS SOCKET 100 MM (II) PERIPHERAL COMPONENTS, INCLUDING: 1 1 CAROUSEL KA-3000 GR GR FOR CASSETTES WITH RODS TECHNICAL DATA: CAPACITY/CAPACITY 3000 KG NUMBER OF PITCHES 4 CONVEYING SPEED ALONG 24 M / MIN CROSS CONVEYOR SPEED 40 M / MIN HEIGHT FROM TOP OF FLOOR 700 MM OPERATING VOLTAGE 400 V / 50 HZ CONTROL VOLTAGE 230 V / 50 HZ THE CARTRIDGE SPACE TRACKING VIA THE AUTOMATIC CONTROL. THE CAROUSEL CONSISTS IN PARTICULAR OF: OUTSOURCING TRAIN, CONSISTING OF: -THE STEEL FOOT PLATES AND ANCHORS, DIRECTLY ON THE GROUND TURNED OFF AND INTEGRATED INTO THE SHELF, SUITABLE FOR THE INSTALLATION OF THE REQUIRED MECHANICAL PARTS -THE SPEZIALGLEITEM, AS WELL AS THE LATERAL GUIDE -THE GRIPPER MECHANISM, WHICH CONTAINS THE TAPE AND TRANSPORTED TO THE NEXT POSITION POSITIVELY THE GEAR MOTOR WITH CHAIN, THE SPROCKET WHEELS AND THE CHAIN GUIDE CROSS CONVEYOR BELT, COMPRISING; -TWO CASSETTE COURSES, ONE OF THEM AS WORK PROVIDED -THE STEEL CONSTRUCTION INCL. FOOT PLATES AND ANCHORS, PLACED DIRECTLY ON THE FLOOR, SUITABLE FOR THE INSTALLATION OF THE REQUIRED MECHANICAL PARTS -THE SPECIAL GLIDERS, AS WELL AS THE LATERAL GUIDE -THE QUERVERSCHIEBEBALKEN AS A DRIVER FOR THE CASSETTES -THE DRIVE MOTOR WITH THE REQUIRED DRIVE ELEMENTS -THE MECHANICAL PREPARATIONS FOR THE LOAD CELLS INSTALLATION AT THE WORKPLACE STORAGE CAR, RUNNING SUCH AS PAGING RAILWAY ELECTRICAL CONTROL CONSISTING OF: -THE CONTROL PANEL WITH PUSH BUTTONS FOR ALL INDIVIDUAL MOVEMENTS, INCLUDING ON/OFF BUTTON AND EMERGENCY PUSH BUTTON -THE POSITION AND CONTROL SWITCHES -POWER AND CONTROL SUPPLY -FIRMLY INSTALLED CONTROL CABINETS WITH BUILT-IN CONTROL -THE NECESSARY CABLES, AS WELL AS THE INTERNAL WIRING THE SAFETY LIGHT BARRIER INCL. MOUNTING BRACKETS, WHICH PERCEIVES THE PERSON PROTECTION DURING CARTRIDGE MOVEMENT CONDITION: USED, THE LAST MAINTENANCE WAS PERFORMED IN 2017, SHORTLY AFTER IT WAS MINED PROFESSIONALLY, SO THAT IT CAN BE REBUILT AT ANY TIME. THE COMPANY WHICH HAS DEGRADED THE PLANT COULD PERFORM THE INSTALLATION. AVAILABLE: AVAILABLE NOW LOCATION: NUREMBERG
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Precio: used machinery auction RESALE 95 €
Ubicación: Land-weight approx.: 100 kg<br/>dimensions (l x w x h) approx.: 800 x 500 x 1050 mm<br/>description: throat depth 290 mm, table size 400 x 400 mm, with small mitre fence 0 to 60°, reel diameter approx. 300 mm, motor power 3 hp, max. cutting height approx. 200 mm WEIGHT APPROX.: 100 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 500 X 1050 MM
DESCRIPTION: THROAT DEPTH 290 MM, TABLE SIZE 400 X 400 MM, WITH SMALL MITRE FENCE 0 TO 60°, REEL DIAMETER APPROX. 300 MM, MOTOR POWER 3 HP, MAX. CUTTING HEIGHT APPROX. 200 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-ammonia liquid chiller gea grasso vp 1300
 
capacity control
all screw compressors used in the package series are
fitted with a continuous capacity control with a range
of 10 - 100%.
the capacity is adjusted by shortening the compressor
stroke. the defining factor for the compression
process is the effective rotor length; this is altered by
a hydraulically operated control slide (mounted below
the rotors).
as a standard, each grasso liquid chiller fx pp, lp, vp comprises a low-voltage switchgear installation (ip54) with
integral freely programmable logic controller (plc) gsc. the software functions and the assignment of
inputs/outputs of the gsc control are described separately.
the standard scope of delivery for the low-voltage switchgear installation for liquid
chillers fx comprises:
 
• main switch (load break cut-out)
• star/delta combination for drive motor
• motor fuse
• motor current transformer
• motor winding protector
• plc hardware
• oil pump contactor
• control transformer with double control fuse on primary and
secondary side
• 24 v dc current supply
• emergency off button
• signal lamp - compressor running
• signal lamp — fault
• signal lamp - warning   AMMONIA LIQUID CHILLER GEA GRASSO VP 1300 CAPACITY CONTROL ALL SCREW COMPRESSORS USED IN THE PACKAGE SERIES ARE FITTED WITH A CONTINUOUS CAPACITY CONTROL WITH A RANGE OF 10 - 100%. THE CAPACITY IS ADJUSTED BY SHORTENING THE COMPRESSOR STROKE. THE DEFINING FACTOR FOR THE COMPRESSION PROCESS IS THE EFFECTIVE ROTOR LENGTH; THIS IS ALTERED BY A HYDRAULICALLY OPERATED CONTROL SLIDE (MOUNTED BELOW THE ROTORS). AS A STANDARD, EACH GRASSO LIQUID CHILLER FX PP, LP, VP COMPRISES A LOW-VOLTAGE SWITCHGEAR INSTALLATION (IP54) WITH INTEGRAL FREELY PROGRAMMABLE LOGIC CONTROLLER (PLC) GSC. THE SOFTWARE FUNCTIONS AND THE ASSIGNMENT OF INPUTS/OUTPUTS OF THE GSC CONTROL ARE DESCRIBED SEPARATELY. THE STANDARD SCOPE OF DELIVERY FOR THE LOW-VOLTAGE SWITCHGEAR INSTALLATION FOR LIQUID CHILLERS FX COMPRISES: • MAIN SWITCH (LOAD BREAK CUT-OUT) • STAR/DELTA COMBINATION FOR DRIVE MOTOR • MOTOR FUSE • MOTOR CURRENT TRANSFORMER • MOTOR WINDING PROTECTOR • PLC HARDWARE • OIL PUMP CONTACTOR • CONTROL TRANSFORMER WITH DOUBLE CONTROL FUSE ON PRIMARY AND SECONDARY SIDE • 24 V DC CURRENT SUPPLY • EMERGENCY OFF BUTTON • SIGNAL LAMP - COMPRESSOR RUNNING • SIGNAL LAMP — FAULT • SIGNAL LAMP - WARNING
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec vertiwrap net clipping machine for fruits, vegetables and industrial products 0.5-5.0kg<br><br>auto clipping machine to pack fruits and vegetables as well as industrial products into netting sleeves which are closed at both ends by a metallic staple/clip. suitable to be combined as infeed system: amtec vertiwrap auto dosing machine for fruits, vegetables, etc.- at least, at one of the tops, a labelling/identification tag is placed. - possibility of an automatic change of tube (suitable to carry 200m of net), controlled by a motor. net extraction through a sliding system with two gears: a slow for making the pack and a fast one for getting back the remaining net and returning to the start position. very regular pack size for very flexible net being supplied form net pipe with diameter of 200mm. suitable for packs of 0.5-5.0kg. control panel for easy operation. <br><br>- specifications: max. speed of the machine in neutral: 35 cycles/minute | power: 380v, 2.9kw | air: 1.5m³/min, 6bar | machine dimensions: l1840xw720xh2010mm | weight: 425kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP NET CLIPPING MACHINE FOR FRUITS, VEGETABLES AND INDUSTRIAL PRODUCTS 0.5-5.0KG

AUTO CLIPPING MACHINE TO PACK FRUITS AND VEGETABLES AS WELL AS INDUSTRIAL PRODUCTS INTO NETTING SLEEVES WHICH ARE CLOSED AT BOTH ENDS BY A METALLIC STAPLE/CLIP. SUITABLE TO BE COMBINED AS INFEED SYSTEM: AMTEC VERTIWRAP AUTO DOSING MACHINE FOR FRUITS, VEGETABLES, ETC.- AT LEAST, AT ONE OF THE TOPS, A LABELLING/IDENTIFICATION TAG IS PLACED. - POSSIBILITY OF AN AUTOMATIC CHANGE OF TUBE (SUITABLE TO CARRY 200M OF NET), CONTROLLED BY A MOTOR. NET EXTRACTION THROUGH A SLIDING SYSTEM WITH TWO GEARS: A SLOW FOR MAKING THE PACK AND A FAST ONE FOR GETTING BACK THE REMAINING NET AND RETURNING TO THE START POSITION. VERY REGULAR PACK SIZE FOR VERY FLEXIBLE NET BEING SUPPLIED FORM NET PIPE WITH DIAMETER OF 200MM. SUITABLE FOR PACKS OF 0.5-5.0KG. CONTROL PANEL FOR EASY OPERATION.

- SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 35 CYCLES/MINUTE | POWER: 380V, 2.9KW | AIR: 1.5M³/MIN, 6BAR | MACHINE DIMENSIONS: L1840XW720XH2010MM | WEIGHT: 425KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-pet bottle filling line sig simonazzi 23 000 bph - 2002/2013
 
this line is a complete pet line for beer, carbonated and non carbonated drinks. the line iwas delivered in 2002 by sig simonazzi and it was upgraded in 2011/2013. currently line is installed and powered and it is designed for 1.0 & 1.5 liter with capacity of 23 000 bph.
 
main characteristics
- manufactured in year 2002 upgrade 2011/2013
- capacity 23 000 bph in 1.0 and 1.5 l containers
- total operating hours 38500
- equipment is in very good condition, still installed but ready for immediate relocation.

list of main equipment:
1. pet stretch blow machine blomax 16 sig, (operating hours 38217) with
a. sig box tipper for emptying preform containers
b. preform feeding elevator vzt-2510 with a hopper
c. preform orientator - feeding system
d. water chiller riedel pc 1000 refrigerant r407c
2. blower automatic lubrication system pet 2, year 2009
3. air conveyor system
4. beer analyzer year 2005
5. flash pasteurizer alfa-laval 400 hl/h with vt 40 bc 25 heat exhanger and buffer tank
6. block rinser simonazzi 60 p113 with 60 rinsing heads
7. filling block sig simonazzi tvr eurostar 2000 year 2002, upgrade 2010&2011with arol cap feeding system
8. automatic cip line for filling block
9. filling inspector
10. labeling machine krones prontomatic
11. bottles conveyor, simonazzi
12. laser marker videojet vj3430 year 2010
13. shrink packer smi sk 600t, year 2002 upgrade 2013
14. conveyor system simonazzi for packages
15. printer applicator stay tr602 solv mektek, year 2009, upgrade 2013 (two step marking the front and back)
16. printer-applicator tv102 mectec year2012
17. palletizer simonazzi with pack orienting system
18. pallet stretch wrapping machine robopak genesis, year 2002 upgrade 2012
19. label applicator domino collamat, year 2011   PET BOTTLE FILLING LINE SIG SIMONAZZI 23 000 BPH - 2002/2013 THIS LINE IS A COMPLETE PET LINE FOR BEER, CARBONATED AND NON CARBONATED DRINKS. THE LINE IWAS DELIVERED IN 2002 BY SIG SIMONAZZI AND IT WAS UPGRADED IN 2011/2013. CURRENTLY LINE IS INSTALLED AND POWERED AND IT IS DESIGNED FOR 1.0 & 1.5 LITER WITH CAPACITY OF 23 000 BPH. MAIN CHARACTERISTICS - MANUFACTURED IN YEAR 2002 UPGRADE 2011/2013 - CAPACITY 23 000 BPH IN 1.0 AND 1.5 L CONTAINERS - TOTAL OPERATING HOURS 38500 - EQUIPMENT IS IN VERY GOOD CONDITION, STILL INSTALLED BUT READY FOR IMMEDIATE RELOCATION. LIST OF MAIN EQUIPMENT: 1. PET STRETCH BLOW MACHINE BLOMAX 16 SIG, (OPERATING HOURS 38217) WITH A. SIG BOX TIPPER FOR EMPTYING PREFORM CONTAINERS B. PREFORM FEEDING ELEVATOR VZT-2510 WITH A HOPPER C. PREFORM ORIENTATOR - FEEDING SYSTEM D. WATER CHILLER RIEDEL PC 1000 REFRIGERANT R407C 2. BLOWER AUTOMATIC LUBRICATION SYSTEM PET 2, YEAR 2009 3. AIR CONVEYOR SYSTEM 4. BEER ANALYZER YEAR 2005 5. FLASH PASTEURIZER ALFA-LAVAL 400 HL/H WITH VT 40 BC 25 HEAT EXHANGER AND BUFFER TANK 6. BLOCK RINSER SIMONAZZI 60 P113 WITH 60 RINSING HEADS 7. FILLING BLOCK SIG SIMONAZZI TVR EUROSTAR 2000 YEAR 2002, UPGRADE 2010&2011WITH AROL CAP FEEDING SYSTEM 8. AUTOMATIC CIP LINE FOR FILLING BLOCK 9. FILLING INSPECTOR 10. LABELING MACHINE KRONES PRONTOMATIC 11. BOTTLES CONVEYOR, SIMONAZZI 12. LASER MARKER VIDEOJET VJ3430 YEAR 2010 13. SHRINK PACKER SMI SK 600T, YEAR 2002 UPGRADE 2013 14. CONVEYOR SYSTEM SIMONAZZI FOR PACKAGES 15. PRINTER APPLICATOR STAY TR602 SOLV MEKTEK, YEAR 2009, UPGRADE 2013 (TWO STEP MARKING THE FRONT AND BACK) 16. PRINTER-APPLICATOR TV102 MECTEC YEAR2012 17. PALLETIZER SIMONAZZI WITH PACK ORIENTING SYSTEM 18. PALLET STRETCH WRAPPING MACHINE ROBOPAK GENESIS, YEAR 2002 UPGRADE 2012 19. LABEL APPLICATOR DOMINO COLLAMAT, YEAR 2011
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-weight approx.: 19000 kg<br/>dimensions (l x w x h) approx.: 8000 x 2500 x 2400 mm<br/>description: max. working range without repositioning 2500 x 1300mm<br> max. tool weight 150 kg<br> max. stroke sequence 9001/min<br> max. sheet thickness 8 mm<br> max. punching force 220 kn<br> max. punching diameter 76.2 mm<br> number of tool places 20 pcs.<br> tool changer with 40 places<br> including trumalift sheetmaster machine number 040915<br> yom 1996<br> program version sm 1300v 405<br> <br> including scissors lift table, tools will be sorted out<br> installation dimensions 15000 x 8000 x 2900 mm<br> <br> machine has been started in running operation. machine tools are assigned at the end of production, the machine must be collected by calendar week 51 at the latest, after that the transfer costs must be invoiced. WEIGHT APPROX.: 19000 KG
DIMENSIONS (L X W X H) APPROX.: 8000 X 2500 X 2400 MM
DESCRIPTION: MAX. WORKING RANGE WITHOUT REPOSITIONING 2500 X 1300MM
MAX. TOOL WEIGHT 150 KG
MAX. STROKE SEQUENCE 9001/MIN
MAX. SHEET THICKNESS 8 MM
MAX. PUNCHING FORCE 220 KN
MAX. PUNCHING DIAMETER 76.2 MM
NUMBER OF TOOL PLACES 20 PCS.
TOOL CHANGER WITH 40 PLACES
INCLUDING TRUMALIFT SHEETMASTER MACHINE NUMBER 040915
YOM 1996
PROGRAM VERSION SM 1300V 405

INCLUDING SCISSORS LIFT TABLE, TOOLS WILL BE SORTED OUT
INSTALLATION DIMENSIONS 15000 X 8000 X 2900 MM

MACHINE HAS BEEN STARTED IN RUNNING OPERATION. MACHINE TOOLS ARE ASSIGNED AT THE END OF PRODUCTION, THE MACHINE MUST BE COLLECTED BY CALENDAR WEEK 51 AT THE LATEST, AFTER THAT THE TRANSFER COSTS MUST BE INVOICED.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-pet bottle filling line krones 18 000 bph

this is a complete pet bottle filling line, delivered by krones in year 2003 and used for beer filling
in 1.0 and 1.5 liter pet bottles. the nominal line capacity is 18 000 bph with 1.5 liter bottles. the was in operation till summer 2016 and is still installed, good condition and can be tested.

list of main equipment

1. blow molding machine krones contiform s16, k786-043 with:
- prefom box tipper md3 and feeding system
- chiller klc 74t, kkt-kraus, refrigerant r407c
- 38 gram preform for 1.0 litert pet, capacity 22400 bph
- 40.1 gram preform for 1.5 liter pet, capacity 18 000 bph.
2. air conveyor line krones approx 100 meters.
3. filler monoblock krones mecafill k562-253, year 1999 with
4. full bottle level inspector bbull.
5. flash pasteurizer alfa laval potok with a buffer tank
6. full bottle conveyor system with accumulation table
7. labeler krones starmatic.
8. labeler krones contiroll year 2005.
9. full bottle conveyor system with accumulation tables
10. shrink wrapper smi sk 800.
11. palletizer kettner pressant 1n, 1999.
12. pallet stretch wrapper helix hs40
13. control and mcc cabinets.   PET BOTTLE FILLING LINE KRONES 18 000 BPH THIS IS A COMPLETE PET BOTTLE FILLING LINE, DELIVERED BY KRONES IN YEAR 2003 AND USED FOR BEER FILLING IN 1.0 AND 1.5 LITER PET BOTTLES. THE NOMINAL LINE CAPACITY IS 18 000 BPH WITH 1.5 LITER BOTTLES. THE WAS IN OPERATION TILL SUMMER 2016 AND IS STILL INSTALLED, GOOD CONDITION AND CAN BE TESTED. LIST OF MAIN EQUIPMENT 1. BLOW MOLDING MACHINE KRONES CONTIFORM S16, K786-043 WITH: - PREFOM BOX TIPPER MD3 AND FEEDING SYSTEM - CHILLER KLC 74T, KKT-KRAUS, REFRIGERANT R407C - 38 GRAM PREFORM FOR 1.0 LITERT PET, CAPACITY 22400 BPH - 40.1 GRAM PREFORM FOR 1.5 LITER PET, CAPACITY 18 000 BPH. 2. AIR CONVEYOR LINE KRONES APPROX 100 METERS. 3. FILLER MONOBLOCK KRONES MECAFILL K562-253, YEAR 1999 WITH 4. FULL BOTTLE LEVEL INSPECTOR BBULL. 5. FLASH PASTEURIZER ALFA LAVAL POTOK WITH A BUFFER TANK 6. FULL BOTTLE CONVEYOR SYSTEM WITH ACCUMULATION TABLE 7. LABELER KRONES STARMATIC. 8. LABELER KRONES CONTIROLL YEAR 2005. 9. FULL BOTTLE CONVEYOR SYSTEM WITH ACCUMULATION TABLES 10. SHRINK WRAPPER SMI SK 800. 11. PALLETIZER KETTNER PRESSANT 1N, 1999. 12. PALLET STRETCH WRAPPER HELIX HS40 13. CONTROL AND MCC CABINETS.
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-generator, emergency generator, generator, aggregate, generator, generator, emergency generator<br /><br />-emergency power generator with automatic switchboard amg 2<br />-diesel engine diesel engine scania type dsc 14 49<br />-generator a. van kaick type dsg52m1-4<br />-output 360 kva 50 hz<br />-3x schuko 230 volt<br />-1x power socket 63 a<br />-1x power socket 32 a<br />-1x power socket 16 a<br />-1x generator input 400 a automatically switching over for emergency operation<br />-1x generator output 400 a automatically switching over for emergency operation<br />-electric oil heating for direct start<br />-dimensioning aggregate 3820/1650 / h2160 mm<br />-weight 4310 kg GENERATOR, EMERGENCY GENERATOR, GENERATOR, AGGREGATE, GENERATOR, GENERATOR, EMERGENCY GENERATOR

-EMERGENCY POWER GENERATOR WITH AUTOMATIC SWITCHBOARD AMG 2
-DIESEL ENGINE DIESEL ENGINE SCANIA TYPE DSC 14 49
-GENERATOR A. VAN KAICK TYPE DSG52M1-4
-OUTPUT 360 KVA 50 HZ
-3X SCHUKO 230 VOLT
-1X POWER SOCKET 63 A
-1X POWER SOCKET 32 A
-1X POWER SOCKET 16 A
-1X GENERATOR INPUT 400 A AUTOMATICALLY SWITCHING OVER FOR EMERGENCY OPERATION
-1X GENERATOR OUTPUT 400 A AUTOMATICALLY SWITCHING OVER FOR EMERGENCY OPERATION
-ELECTRIC OIL HEATING FOR DIRECT START
-DIMENSIONING AGGREGATE 3820/1650 / H2160 MM
-WEIGHT 4310 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-diesel generator power plant 106 mw with wartsila 7x18v46 hfo
 
this 106 mw power plant was delivered by wartsila in year 2000, operation started in 2001 and it has 7 x 18v46 diesel engines running on heavy fuel oil (hfo) at 500 rpm coupled with abb made brushless synchronous 11 kv / 50 hz alternators. i has been in operated under ppa and engines have been operated from 50700 to 69000 hours in base load power production this power plant is designed and build by wartsila utilizing their highly standardized functional module delivery. operation and maintenance works are carried out strictly in accordance with wartsila manuals, 60 000 hour maintenance is carried out to 3 units. no any unexpected breakdowns has happened. delivery contains complete functioning power plant with 110 kv switchyard, buildings and day tank yard. power plant is currently in standby mode, in excellent condition it has all service records and complete original documentation available at site.
 
main plant characteristics at current site conditions:
 
net power output at site: 106 mw at 110 kv / 50 hz
engines: 7 x 18v46 - 500 rpm
shaft output: iso 16 290 kwm
alternators: abb amg 1600 ss12 dseb self-cooled, brushless, synchronous
power factor: 0.8
efficiency: 0.97 (at rated output, 50 hz and power factor 0.8)
voltage: 11 000 v, with adjustment range +5 - 10%
frequency: 50 hz +/-5%
 
fuel consumption gross: 8290 - 8330 kj/kwh (43.4 to 43.2 % efficiency)
lube oil consumption: 0.7 g/kwh
cooling system: closed loop radiator cooling
fuel oil: hfo viscosity max 380 cst / 50 °c
internal electric consump: 2.5 % at full load, up to 4% at low load   DIESEL GENERATOR POWER PLANT 106 MW WITH WARTSILA 7X18V46 HFO THIS 106 MW POWER PLANT WAS DELIVERED BY WARTSILA IN YEAR 2000, OPERATION STARTED IN 2001 AND IT HAS 7 X 18V46 DIESEL ENGINES RUNNING ON HEAVY FUEL OIL (HFO) AT 500 RPM COUPLED WITH ABB MADE BRUSHLESS SYNCHRONOUS 11 KV / 50 HZ ALTERNATORS. I HAS BEEN IN OPERATED UNDER PPA AND ENGINES HAVE BEEN OPERATED FROM 50700 TO 69000 HOURS IN BASE LOAD POWER PRODUCTION THIS POWER PLANT IS DESIGNED AND BUILD BY WARTSILA UTILIZING THEIR HIGHLY STANDARDIZED FUNCTIONAL MODULE DELIVERY. OPERATION AND MAINTENANCE WORKS ARE CARRIED OUT STRICTLY IN ACCORDANCE WITH WARTSILA MANUALS, 60 000 HOUR MAINTENANCE IS CARRIED OUT TO 3 UNITS. NO ANY UNEXPECTED BREAKDOWNS HAS HAPPENED. DELIVERY CONTAINS COMPLETE FUNCTIONING POWER PLANT WITH 110 KV SWITCHYARD, BUILDINGS AND DAY TANK YARD. POWER PLANT IS CURRENTLY IN STANDBY MODE, IN EXCELLENT CONDITION IT HAS ALL SERVICE RECORDS AND COMPLETE ORIGINAL DOCUMENTATION AVAILABLE AT SITE. MAIN PLANT CHARACTERISTICS AT CURRENT SITE CONDITIONS: NET POWER OUTPUT AT SITE: 106 MW AT 110 KV / 50 HZ ENGINES: 7 X 18V46 - 500 RPM SHAFT OUTPUT: ISO 16 290 KWM ALTERNATORS: ABB AMG 1600 SS12 DSEB SELF-COOLED, BRUSHLESS, SYNCHRONOUS POWER FACTOR: 0.8 EFFICIENCY: 0.97 (AT RATED OUTPUT, 50 HZ AND POWER FACTOR 0.8) VOLTAGE: 11 000 V, WITH ADJUSTMENT RANGE +5 - 10% FREQUENCY: 50 HZ +/-5% FUEL CONSUMPTION GROSS: 8290 - 8330 KJ/KWH (43.4 TO 43.2 % EFFICIENCY) LUBE OIL CONSUMPTION: 0.7 G/KWH COOLING SYSTEM: CLOSED LOOP RADIATOR COOLING FUEL OIL: HFO VISCOSITY MAX 380 CST / 50 °C INTERNAL ELECTRIC CONSUMP: 2.5 % AT FULL LOAD, UP TO 4% AT LOW LOAD
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-weight approx.: 800 kg<br/>dimensions (l x w x h) approx.: 1020 x 1300 x 1150 mm<br/>description: drilling diameter to 32 mm, output 110 w, 230 v, on hydraulic unit, with hydraulic cylinders for possible workpiece clamping, entire electrical unit for starting of the drilling machine as well as for the opening and closing of the clamping unit, on mobile base frame WEIGHT APPROX.: 800 KG
DIMENSIONS (L X W X H) APPROX.: 1020 X 1300 X 1150 MM
DESCRIPTION: DRILLING DIAMETER TO 32 MM, OUTPUT 110 W, 230 V, ON HYDRAULIC UNIT, WITH HYDRAULIC CYLINDERS FOR POSSIBLE WORKPIECE CLAMPING, ENTIRE ELECTRICAL UNIT FOR STARTING OF THE DRILLING MACHINE AS WELL AS FOR THE OPENING AND CLOSING OF THE CLAMPING UNIT, ON MOBILE BASE FRAME
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-unscrambler lanfranchi for pet bottles 12 000 bph

complete never installed pet bottle unscrambler system made by italian lanfranchi in year 2005 - still in original delivery boxes. it is designed for 8 oz (0.237 liters), 20 (0.591 liters) and 33.8 oz (1.0 liters) pet bottles with the production capacity of 12000 bph. the delivery includes complete unscrambling system as follows:

rotating unscrambler
- model lift master l1 std 20-22
- superior opening cover
- vacuum transfer star wheel at machine exit
- speed control photocells at machine exit
- electrical control cabinet in stainless steel with a/b components and ul certified
- no.1 set of handling parts for 0.237 and 1,0 l bottles and an adapter set for 0.591 liter

bottle elevator for the in-feed of bottles to the superior part of the unscrambler. elevator built in stainless steel aisi 304. complete with supporting legs built in painted steel. l= 6.000 mm

air conveyor system with the following components:
- 3 m of straight conveying structure built in stainless steel aisi 304
- one air blower with filters
- one dump gate at in-feed of air conveyor
- one double hinge unit for bottle height adjustment
- manual body guide adjustment·
- a set of supporting frames built in stainless steel aisi 304

control system with allan bradley plc and zenon software. electric system is 460 v / 60 hz   UNSCRAMBLER LANFRANCHI FOR PET BOTTLES 12 000 BPH COMPLETE NEVER INSTALLED PET BOTTLE UNSCRAMBLER SYSTEM MADE BY ITALIAN LANFRANCHI IN YEAR 2005 - STILL IN ORIGINAL DELIVERY BOXES. IT IS DESIGNED FOR 8 OZ (0.237 LITERS), 20 (0.591 LITERS) AND 33.8 OZ (1.0 LITERS) PET BOTTLES WITH THE PRODUCTION CAPACITY OF 12000 BPH. THE DELIVERY INCLUDES COMPLETE UNSCRAMBLING SYSTEM AS FOLLOWS: ROTATING UNSCRAMBLER - MODEL LIFT MASTER L1 STD 20-22 - SUPERIOR OPENING COVER - VACUUM TRANSFER STAR WHEEL AT MACHINE EXIT - SPEED CONTROL PHOTOCELLS AT MACHINE EXIT - ELECTRICAL CONTROL CABINET IN STAINLESS STEEL WITH A/B COMPONENTS AND UL CERTIFIED - NO.1 SET OF HANDLING PARTS FOR 0.237 AND 1,0 L BOTTLES AND AN ADAPTER SET FOR 0.591 LITER BOTTLE ELEVATOR FOR THE IN-FEED OF BOTTLES TO THE SUPERIOR PART OF THE UNSCRAMBLER. ELEVATOR BUILT IN STAINLESS STEEL AISI 304. COMPLETE WITH SUPPORTING LEGS BUILT IN PAINTED STEEL. L= 6.000 MM AIR CONVEYOR SYSTEM WITH THE FOLLOWING COMPONENTS: - 3 M OF STRAIGHT CONVEYING STRUCTURE BUILT IN STAINLESS STEEL AISI 304 - ONE AIR BLOWER WITH FILTERS - ONE DUMP GATE AT IN-FEED OF AIR CONVEYOR - ONE DOUBLE HINGE UNIT FOR BOTTLE HEIGHT ADJUSTMENT - MANUAL BODY GUIDE ADJUSTMENT· - A SET OF SUPPORTING FRAMES BUILT IN STAINLESS STEEL AISI 304 CONTROL SYSTEM WITH ALLAN BRADLEY PLC AND ZENON SOFTWARE. ELECTRIC SYSTEM IS 460 V / 60 HZ
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 250 €
Ubicación: Land-weight approx.: 80 kg<br/>dimensions (l x w x h) approx.: 700 x 400 x 830 mm<br/>description: - serial no.: 33569<br> - operating voltage: 400 v, 50 hz<br> - total nominal current: 2 a<br> - table dimensions: 230 x 180 mm<br> - with vice, jaw width: approx. 110 mm WEIGHT APPROX.: 80 KG
DIMENSIONS (L X W X H) APPROX.: 700 X 400 X 830 MM
DESCRIPTION: - SERIAL NO.: 33569
- OPERATING VOLTAGE: 400 V, 50 HZ
- TOTAL NOMINAL CURRENT: 2 A
- TABLE DIMENSIONS: 230 X 180 MM
- WITH VICE, JAW WIDTH: APPROX. 110 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-injection molding machine for pet preforms, husky g 600 pet, year 2000
 
this is a complete preform production line from granule feeding to readymade pet bottle preform conveyor. the equipment was made by husky injection molding systems s. a. (spain) on year 2000 and started to manufacture in 2001. the human-machine interface is an ibm-compatible pc. the nominal capacity of 19000 preform with weight 44 gram for 1.5-liter pet bottles. neck format is light bpf . equipment is on good condition and ready for delivery.
 
the delivery includes:
- injection molding machine g 600 pet p120/130 e 140 husky
- dispenser of the dye mdt3/c piovan
- air conditioner piovan
- water circulation pump gp 1art 1x37 piovan
- vacuum pump f316 / 2 piovan
- granulate desiccant ds 531 piovan
- cooler rpn 1500 piovan
- in / out conveyors
- control instrumentation and control box
 
manufacturer: husky injection molding systems s. a.
manufacturers type: g 600 pet p/120/130 e140
manufacturer year: 2000
capacity: 19000 preforms/hour
number of molds: 96
current preform size: 44 grams for 1.5-liter pet
clamping force: 600 tons
clamping cycle time: 15 seconds
current neck format: light bpf   INJECTION MOLDING MACHINE FOR PET PREFORMS, HUSKY G 600 PET, YEAR 2000 THIS IS A COMPLETE PREFORM PRODUCTION LINE FROM GRANULE FEEDING TO READYMADE PET BOTTLE PREFORM CONVEYOR. THE EQUIPMENT WAS MADE BY HUSKY INJECTION MOLDING SYSTEMS S. A. (SPAIN) ON YEAR 2000 AND STARTED TO MANUFACTURE IN 2001. THE HUMAN-MACHINE INTERFACE IS AN IBM-COMPATIBLE PC. THE NOMINAL CAPACITY OF 19000 PREFORM WITH WEIGHT 44 GRAM FOR 1.5-LITER PET BOTTLES. NECK FORMAT IS LIGHT BPF . EQUIPMENT IS ON GOOD CONDITION AND READY FOR DELIVERY. THE DELIVERY INCLUDES: - INJECTION MOLDING MACHINE G 600 PET P120/130 E 140 HUSKY - DISPENSER OF THE DYE MDT3/C PIOVAN - AIR CONDITIONER PIOVAN - WATER CIRCULATION PUMP GP 1ART 1X37 PIOVAN - VACUUM PUMP F316 / 2 PIOVAN - GRANULATE DESICCANT DS 531 PIOVAN - COOLER RPN 1500 PIOVAN - IN / OUT CONVEYORS - CONTROL INSTRUMENTATION AND CONTROL BOX MANUFACTURER: HUSKY INJECTION MOLDING SYSTEMS S. A. MANUFACTURERS TYPE: G 600 PET P/120/130 E140 MANUFACTURER YEAR: 2000 CAPACITY: 19000 PREFORMS/HOUR NUMBER OF MOLDS: 96 CURRENT PREFORM SIZE: 44 GRAMS FOR 1.5-LITER PET CLAMPING FORCE: 600 TONS CLAMPING CYCLE TIME: 15 SECONDS CURRENT NECK FORMAT: LIGHT BPF
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 25.900 €
Ubicación: Land-; mileage [km]: 60000; power [ps]: 131; gross weight [kg]: 3500; transmission: mechanisch; front tyre size: 195/70r15; rear tyre size: 195/70r15; accessories: abs, bordcomputer, differentialsperre, klimaanlage; colour: weiß; suspension type: blatt/blatt; cargo space dimensions [lxbxh]: 2550x1850x350; max payload [kg]: 1150; emission class: euro 4 ; MILEAGE [KM]: 60000; POWER [PS]: 131; GROSS WEIGHT [KG]: 3500; TRANSMISSION: MECHANISCH; FRONT TYRE SIZE: 195/70R15; REAR TYRE SIZE: 195/70R15; ACCESSORIES: ABS, BORDCOMPUTER, DIFFERENTIALSPERRE, KLIMAANLAGE; COLOUR: WEIß; SUSPENSION TYPE: BLATT/BLATT; CARGO SPACE DIMENSIONS [LXBXH]: 2550X1850X350; MAX PAYLOAD [KG]: 1150; EMISSION CLASS: EURO 4
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-tunnel pasteurizer for glass bottles krones k570 – 130, 55 000 bph
 
the machine was delivered by krones in year 1998. this machine is for pasteurizing beer in 0.33 – 0.5 liter glass bottles, the capacity is 55 000 bottles per hour. this pasteurizer has totally 10 zones of which three are pre-heating zones, two heating zones, two pasteurization zones and three cooling zones. belts are plastic material.
 
technical information:
 
manufacturer: krones-zierk gmbh
type: k570-130
number of zones: 10-zones
manufacturing year: 1998
capacity: 55.000 bottles/h in 0.33 – 0.5 liter glass bottles
pasteurization temp: 61 – 62,6 °c (temperatures and times are dependent on the bottle size)
inlet temp: 5 °c
outlet temp: 24 – 34 °c
treatment area: 290 m2
total pasteurization units: 34,8 – 35,5 pu
holding time: 11,82 – 19,87 min
treatment time: 52,56 – 88,34 min
run-through time: 57 – 96 min
machine width: 7 500 mm (with mountings)
machine length: 27 000 mm (incl. in-/outlet conveyor)
machine height: 3 100 mm (without ground clearance)
ground clearance: 340 mm
weight: 85 ton empty, 161 – 175 tons loaded
no. of conveyor tracks: 3 inlet and 3 outlet
steam requirement: 3 bar – 3 942 kg/h during startup, 2 094 kg/h in operation
water requirement: ca. 1,5 m3/h in operation
total installed capacity: ca. 192 kw   TUNNEL PASTEURIZER FOR GLASS BOTTLES KRONES K570 – 130, 55 000 BPH THE MACHINE WAS DELIVERED BY KRONES IN YEAR 1998. THIS MACHINE IS FOR PASTEURIZING BEER IN 0.33 – 0.5 LITER GLASS BOTTLES, THE CAPACITY IS 55 000 BOTTLES PER HOUR. THIS PASTEURIZER HAS TOTALLY 10 ZONES OF WHICH THREE ARE PRE-HEATING ZONES, TWO HEATING ZONES, TWO PASTEURIZATION ZONES AND THREE COOLING ZONES. BELTS ARE PLASTIC MATERIAL. TECHNICAL INFORMATION: MANUFACTURER: KRONES-ZIERK GMBH TYPE: K570-130 NUMBER OF ZONES: 10-ZONES MANUFACTURING YEAR: 1998 CAPACITY: 55.000 BOTTLES/H IN 0.33 – 0.5 LITER GLASS BOTTLES PASTEURIZATION TEMP: 61 – 62,6 °C (TEMPERATURES AND TIMES ARE DEPENDENT ON THE BOTTLE SIZE) INLET TEMP: 5 °C OUTLET TEMP: 24 – 34 °C TREATMENT AREA: 290 M2 TOTAL PASTEURIZATION UNITS: 34,8 – 35,5 PU HOLDING TIME: 11,82 – 19,87 MIN TREATMENT TIME: 52,56 – 88,34 MIN RUN-THROUGH TIME: 57 – 96 MIN MACHINE WIDTH: 7 500 MM (WITH MOUNTINGS) MACHINE LENGTH: 27 000 MM (INCL. IN-/OUTLET CONVEYOR) MACHINE HEIGHT: 3 100 MM (WITHOUT GROUND CLEARANCE) GROUND CLEARANCE: 340 MM WEIGHT: 85 TON EMPTY, 161 – 175 TONS LOADED NO. OF CONVEYOR TRACKS: 3 INLET AND 3 OUTLET STEAM REQUIREMENT: 3 BAR – 3 942 KG/H DURING STARTUP, 2 094 KG/H IN OPERATION WATER REQUIREMENT: CA. 1,5 M3/H IN OPERATION TOTAL INSTALLED CAPACITY: CA. 192 KW
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 2760; rear tyres remaining: 88; front tyres remaining: 89; inspection date: 2019; amount of previous owners: 1; maximum lift capacity [kg]: 200; full service history: ja ; GROSS WEIGHT [KG]: 2760; REAR TYRES REMAINING: 88; FRONT TYRES REMAINING: 89; INSPECTION DATE: 2019; AMOUNT OF PREVIOUS OWNERS: 1; MAXIMUM LIFT CAPACITY [KG]: 200; FULL SERVICE HISTORY: JA
Vendedor: Rothlehner Arbeitsbühnen GmbH
Año de construcción: usado
Ubicación: Land-start hole edm machine exeron sd 100a
06-01-010
shipping time: immediately

number: 06-01-010

manufacturer: exeron
type: sd 100a

machine data
year of construction: approx. 1990
l x w x h: approx. 1100 x 900 x 2100 mm
weight: 800 kg

very good condition

technical data
digital display: 2 - axis

electrodes ã?: approx. ã? 0,3-3,0 mm

procedures:
x - axis: approx. 450 mm
y - axis: 180 mm

electrode length 400 mm

maximum workpiece weight: 200 kg

travel - edm head: approx. 350 mm

accessories
â?¢ documentation
â?¢ various electrodes

other accessories on request
price and other specifications on request START HOLE EDM MACHINE EXERON SD 100A 06-01-010 SHIPPING TIME: IMMEDIATELY NUMBER: 06-01-010 MANUFACTURER: EXERON TYPE: SD 100A MACHINE DATA YEAR OF CONSTRUCTION: APPROX. 1990 L X W X H: APPROX. 1100 X 900 X 2100 MM WEIGHT: 800 KG VERY GOOD CONDITION TECHNICAL DATA DIGITAL DISPLAY: 2 - AXIS ELECTRODES &ATILDE;?: APPROX. &ATILDE;? 0,3-3,0 MM PROCEDURES: X - AXIS: APPROX. 450 MM Y - AXIS: 180 MM ELECTRODE LENGTH 400 MM MAXIMUM WORKPIECE WEIGHT: 200 KG TRAVEL - EDM HEAD: APPROX. 350 MM ACCESSORIES &ACIRC;?&CENT; DOCUMENTATION &ACIRC;?&CENT; VARIOUS ELECTRODES OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-turning diameter over bed:  mm<br/>spindle passage:     32 mm<br/>turning length:        mm<br/>--------------------------------------------------:  <br/>basic functions:  <br/>- number of spindles:      2  <br/>- number of turrets:      2  <br/>working range turning:  <br/>- bar diameter (max):     32 mm<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: MM
SPINDLE PASSAGE: 32 MM
TURNING LENGTH: MM
--------------------------------------------------:
BASIC FUNCTIONS:
- NUMBER OF SPINDLES: 2
- NUMBER OF TURRETS: 2
WORKING RANGE TURNING:
- BAR DIAMETER (MAX): 32 MM




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-estarta
machine name: centerless grinding
manufacturer: estarta
model: 310
location: mumbai
year of manufacturing: 1969
technical specification: 
work capacity: 76.2 mm
grinding wheel dia: 355.6 mm
gw power: 11.2 kw
regulating wheel dia: 254 mm
rw power: 0.7 kw
rw rpm:	310 rpm


 ESTARTA MACHINE NAME: CENTERLESS GRINDING MANUFACTURER: ESTARTA MODEL: 310 LOCATION: MUMBAI YEAR OF MANUFACTURING: 1969 TECHNICAL SPECIFICATION: WORK CAPACITY: 76.2 MM GRINDING WHEEL DIA: 355.6 MM GW POWER: 11.2 KW REGULATING WHEEL DIA: 254 MM RW POWER: 0.7 KW RW RPM: 310 RPM
Vendedor: Syndicate Machines Pvt. Ltd.
Año de construcción: usado
Ubicación: Land-weight approx.: 80 kg<br/>dimensions (l x w x h) approx.: 800 x 1200 x 500 mm<br/>description: load capacity 1000 kg, with liftket trolley travel gearing, hoist 1000/2-5/1.25, yom 2008, serial number 821153, with silent control, lifting height 6000 mm, hoist motor 1000/2-5/1.25, with test books WEIGHT APPROX.: 80 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 1200 X 500 MM
DESCRIPTION: LOAD CAPACITY 1000 KG, WITH LIFTKET TROLLEY TRAVEL GEARING, HOIST 1000/2-5/1.25, YOM 2008, SERIAL NUMBER 821153, WITH SILENT CONTROL, LIFTING HEIGHT 6000 MM, HOIST MOTOR 1000/2-5/1.25, WITH TEST BOOKS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-* heidelberg cd 102-4 + lx
year of construction: 2008
print number: 130 million
prinect press center
wall screen
autoplate, alcolor vario, technotrans combi star
preset plus investors + delivery
ink unit temperature control
tresu paint factory
air star, dry star 3000m coating star,.
can wash star, static star
x 2 display (160cm)
1 x ir / dryer...
 * HEIDELBERG CD 102-4 + LX YEAR OF CONSTRUCTION: 2008 PRINT NUMBER: 130 MILLION PRINECT PRESS CENTER WALL SCREEN AUTOPLATE, ALCOLOR VARIO, TECHNOTRANS COMBI STAR PRESET PLUS INVESTORS + DELIVERY INK UNIT TEMPERATURE CONTROL TRESU PAINT FACTORY AIR STAR, DRY STAR 3000M COATING STAR,. CAN WASH STAR, STATIC STAR X 2 DISPLAY (160CM) 1 X IR / DRYER...
Vendedor: Bavarian graphics
Año de construcción: usado
Ubicación: Land-capacity: 6000 - 18000  bottles/h      <br />formats:  bottle diameter: 50-98 mm, max. labeldimensions: 140/140 mm, body, shoulder, rear label<br />machine pitch: 182 mm<br />direction:  clockwise rotation<br />operation / control:   vipa cpu 214, auxiliary voltage: 24 v / dc<br />equipment: bottle carriers: 12 pieces, pallete shaft: 5/5 pieces, gripper partition: 4, star partition: 8<br /> CAPACITY: 6000 - 18000 BOTTLES/H
FORMATS: BOTTLE DIAMETER: 50-98 MM, MAX. LABELDIMENSIONS: 140/140 MM, BODY, SHOULDER, REAR LABEL
MACHINE PITCH: 182 MM
DIRECTION: CLOCKWISE ROTATION
OPERATION / CONTROL: VIPA CPU 214, AUXILIARY VOLTAGE: 24 V / DC
EQUIPMENT: BOTTLE CARRIERS: 12 PIECES, PALLETE SHAFT: 5/5 PIECES, GRIPPER PARTITION: 4, STAR PARTITION: 8
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-we can offer you two astepon bag box filling machine.
 
    here is ast epos technical documents and photos. 
 
    each machine can be driven separately. the control panel is shared. 
 
    star and stop are both on their own. logic is common.

c.a.f.1h/1 WE CAN OFFER YOU TWO ASTEPON BAG BOX FILLING MACHINE. HERE IS AST EPOS TECHNICAL DOCUMENTS AND PHOTOS. EACH MACHINE CAN BE DRIVEN SEPARATELY. THE CONTROL PANEL IS SHARED. STAR AND STOP ARE BOTH ON THEIR OWN. LOGIC IS COMMON. C.A.F.1H/1 "REVIEW + ABF SERIAL NO. 687/2004 C.A.F.2H/1 "REVIEW + 2 ABF SERIAL NO. 687-716/2004
Vendedor: Koneikko Oy
Año de construcción: usado
Ubicación: Land-neue kantenschleifmaschine\r\nfabr.: rehnen\r\ntyp: r1\r\n\r\ntechnische daten:\r\nspannung: 400 v, 50hz\r\nmotorleistung: 3 kw\r\nschleifbandabmessung: 150 × 2280 mm\r\nschleifbandgeschwindigkeit: 22 m/sec\r\ntischgröße: 350 × 750 mm\r\nplatzbedarf: 800 × 1000 mm\r\ngewicht: ab 200 kg\r\nabsauganschluss: Ø 100 mm\r\narbeitsplatzbezogener emissionswert: 83 db (a)\r\n\r\ninklusive:\r\n- auflagetisch an der umlenkrolle\r\n- schwenkbares kantenschleifaggregat oszillation 90 - 135°\r\n\r\ndie hochwertige kantenschleifmaschine r 1 ist für anspruchsvolle schleifarbeiten konzipiert.\r\nmit ihrem leistungsstarken graugussschleifaggregat und der pneumatischen oszillation ist die r 1 für hohe oberflächenqualitäten ausgelegt.\r\nein in der höhe verstellbarer arbeitstisch gewährleistet eine sichere werkstückaufnahme und ein ergonomisches arbeiten.\r\n\r\n\r\noptional erhältliches zubehör:\r\n- schleifbandbreite von 200 mm\r\n- fahreinrichtung mit grosen lenkrollen\r\n- polumschaltbarer motor 11 / 22 m/sek.\r\n- konsole für vorschub\r\n- zusätzliche umlenkrolle, durchmesser gem. vorgabe (standardgrößen von 40-80 mm und sondergrößen)\r\n\r\n NEUE KANTENSCHLEIFMASCHINE\R\NFABR.: REHNEN\R\NTYP: R1\R\N\R\NTECHNISCHE DATEN:\R\NSPANNUNG: 400 V, 50HZ\R\NMOTORLEISTUNG: 3 KW\R\NSCHLEIFBANDABMESSUNG: 150 × 2280 MM\R\NSCHLEIFBANDGESCHWINDIGKEIT: 22 M/SEC\R\NTISCHGRößE: 350 × 750 MM\R\NPLATZBEDARF: 800 × 1000 MM\R\NGEWICHT: AB 200 KG\R\NABSAUGANSCHLUSS: Ø 100 MM\R\NARBEITSPLATZBEZOGENER EMISSIONSWERT: 83 DB (A)\R\N\R\NINKLUSIVE:\R\N- AUFLAGETISCH AN DER UMLENKROLLE\R\N- SCHWENKBARES KANTENSCHLEIFAGGREGAT OSZILLATION 90 - 135°\R\N\R\NDIE HOCHWERTIGE KANTENSCHLEIFMASCHINE R 1 IST FüR ANSPRUCHSVOLLE SCHLEIFARBEITEN KONZIPIERT.\R\NMIT IHREM LEISTUNGSSTARKEN GRAUGUSSSCHLEIFAGGREGAT UND DER PNEUMATISCHEN OSZILLATION IST DIE R 1 FüR HOHE OBERFLäCHENQUALITäTEN AUSGELEGT.\R\NEIN IN DER HöHE VERSTELLBARER ARBEITSTISCH GEWäHRLEISTET EINE SICHERE WERKSTüCKAUFNAHME UND EIN ERGONOMISCHES ARBEITEN.\R\N\R\N\R\NOPTIONAL ERHäLTLICHES ZUBEHöR:\R\N- SCHLEIFBANDBREITE VON 200 MM\R\N- FAHREINRICHTUNG MIT GROSEN LENKROLLEN\R\N- POLUMSCHALTBARER MOTOR 11 / 22 M/SEK.\R\N- KONSOLE FüR VORSCHUB\R\N- ZUSäTZLICHE UMLENKROLLE, DURCHMESSER GEM. VORGABE (STANDARDGRößEN VON 40-80 MM UND SONDERGRößEN)\R\N\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 2.750 €
Ubicación: Land-stephan um40 universal machine second-hand
two-speed 1440/2890 r/min
incl. blade assembly
machine tilt for the removal of the processed medium
bowl made of stainless steel, 40 litres capacity for up to 30 litre batches
machine has problems in the course of starting as a period would be missing when switching
in 1st and 2nd gear the engine runs then, until on the clatter of lid and crank, normal
machine must be thoroughly cleaned prior to use.
well-kept condition

viedo on test run and more pictures available STEPHAN UM40 UNIVERSAL MACHINE SECOND-HAND TWO-SPEED 1440/2890 R/MIN INCL. BLADE ASSEMBLY MACHINE TILT FOR THE REMOVAL OF THE PROCESSED MEDIUM BOWL MADE OF STAINLESS STEEL, 40 LITRES CAPACITY FOR UP TO 30 LITRE BATCHES MACHINE HAS PROBLEMS IN THE COURSE OF STARTING AS A PERIOD WOULD BE MISSING WHEN SWITCHING IN 1ST AND 2ND GEAR THE ENGINE RUNS THEN, UNTIL ON THE CLATTER OF LID AND CRANK, NORMAL MACHINE MUST BE THOROUGHLY CLEANED PRIOR TO USE. WELL-KEPT CONDITION VIEDO ON TEST RUN AND MORE PICTURES AVAILABLE
Vendedor: Statt Nahrungsmittelmaschinen
Año de construcción: usado
Ubicación: Land-splicing machine with glue thread\r\nmake: casati\r\ntype: z 2000\r\n\r\ntechnical details:\r\n\r\narm length: 1.200 mm\r\nveneer thickness: 0,4 - 2 mm\r\nfeed speed: approx. 5 - 40 m/min.\r\nnoise measurement: 73,5 db\r\ncompressed air consumption: 0,05 l/min\r\nworking pressure: 6-8 bar \r\noverall dimensions: 2.050 x 600 x 1.400 mm\r\n\r\nthis model is specially designed for the users requiring high production and considerable working speed also when using difficult materials.\r\n\r\n- stepless change of heater oscillation angular \r\n  speed, independent of the linear feeding speed\r\n- accurate adjustment of the feeding friction \r\n  pressure\r\n- adjustment of the starting point and stop point\r\n- thread heating by electric resistance \r\n- amperometer on the control panel for an accurate \r\n  adjustment of the heating temperature\r\n- zig-zag height adjustment\r\n- automatic breaking of the thread\r\n- all functions are operated on the control panel\r\n- compressed air connection is required\r\n- spool with thermoadhesive thread, 1 pc. pliers, 1 set of 20 needles, 0,5 l of antiadhesive liquid\r\n\r\n SPLICING MACHINE WITH GLUE THREAD\R\NMAKE: CASATI\R\NTYPE: Z 2000\R\N\R\NTECHNICAL DETAILS:\R\N\R\NARM LENGTH: 1.200 MM\R\NVENEER THICKNESS: 0,4 - 2 MM\R\NFEED SPEED: APPROX. 5 - 40 M/MIN.\R\NNOISE MEASUREMENT: 73,5 DB\R\NCOMPRESSED AIR CONSUMPTION: 0,05 L/MIN\R\NWORKING PRESSURE: 6-8 BAR \R\NOVERALL DIMENSIONS: 2.050 X 600 X 1.400 MM\R\N\R\NTHIS MODEL IS SPECIALLY DESIGNED FOR THE USERS REQUIRING HIGH PRODUCTION AND CONSIDERABLE WORKING SPEED ALSO WHEN USING DIFFICULT MATERIALS.\R\N\R\N- STEPLESS CHANGE OF HEATER OSCILLATION ANGULAR \R\N SPEED, INDEPENDENT OF THE LINEAR FEEDING SPEED\R\N- ACCURATE ADJUSTMENT OF THE FEEDING FRICTION \R\N PRESSURE\R\N- ADJUSTMENT OF THE STARTING POINT AND STOP POINT\R\N- THREAD HEATING BY ELECTRIC RESISTANCE \R\N- AMPEROMETER ON THE CONTROL PANEL FOR AN ACCURATE \R\N ADJUSTMENT OF THE HEATING TEMPERATURE\R\N- ZIG-ZAG HEIGHT ADJUSTMENT\R\N- AUTOMATIC BREAKING OF THE THREAD\R\N- ALL FUNCTIONS ARE OPERATED ON THE CONTROL PANEL\R\N- COMPRESSED AIR CONNECTION IS REQUIRED\R\N- SPOOL WITH THERMOADHESIVE THREAD, 1 PC. PLIERS, 1 SET OF 20 NEEDLES, 0,5 L OF ANTIADHESIVE LIQUID\R\N\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-working area 250 x 600 mm
de:
flachschleifmaschine, fabr. elb, typ star ii-m, ser.-nr. 470860197, arbeitsbereich 250 x 600 mm
 WORKING AREA 250 X 600 MM DE: FLACHSCHLEIFMASCHINE, FABR. ELB, TYP STAR II-M, SER.-NR. 470860197, ARBEITSBEREICH 250 X 600 MM
Vendedor: Hilco
Año de construcción: usado
Ubicación: Land-new hot press, hydraulically\r\nbrand: italpresse \r\ntype xl/6 30-13 pe\r\n\r\n- electrical - heating plates: 3000 x 1300 mm \r\n- total pressure: 120 to. \r\n- number of hot plates: 2 pc. \r\n- number of floors: 1 pc. \r\n- stroke: 350 mm \r\n- day light opening: 350 mm \r\n- all-round feeding \r\n- number of cylinders: 6 pc. \r\n- diameter of cylinder: 85 mm \r\n- power consumption (hydraulic unit): 3 kw\r\n- electric hot plates of solid hard aluminium with installed heating elements \r\n- heating power 22 kw \r\n- high pressure isolation plates  \r\n- operating temperature: 90° c. \r\n- max. temperature: 120° c. \r\n- supply: 400v/50 hz \r\n- safety accordance with ce standard \r\n\r\nstandard equipment:\r\n- movement of the press table with rack and pinion parallel guidance at two corners of the press table made from self-lubricating material \r\n- electronic control unit for controlling and monitoring the machine \r\n- digital timer for setting the pressing time and automatic opening \r\n- digital input and monitoring of the pressing pressure \r\n- timer for programming the starting time of heater\r\n- digital display of diagnosis and fault messages \r\n- safety circuit with two-hand control \r\n- emergency strip wire \r\n- safety holder for the lower press table \r\n\r\noptional for an extra charge:\r\n- opening / cylinder stroke 600 mm \r\n- electrical inactivation of the left cylinder bank \r\n- additional charge for ?gold-anodised? heating plates\r\n NEW HOT PRESS, HYDRAULICALLY\R\NBRAND: ITALPRESSE \R\NTYPE XL/6 30-13 PE\R\N\R\N- ELECTRICAL - HEATING PLATES: 3000 X 1300 MM \R\N- TOTAL PRESSURE: 120 TO. \R\N- NUMBER OF HOT PLATES: 2 PC. \R\N- NUMBER OF FLOORS: 1 PC. \R\N- STROKE: 350 MM \R\N- DAY LIGHT OPENING: 350 MM \R\N- ALL-ROUND FEEDING \R\N- NUMBER OF CYLINDERS: 6 PC. \R\N- DIAMETER OF CYLINDER: 85 MM \R\N- POWER CONSUMPTION (HYDRAULIC UNIT): 3 KW\R\N- ELECTRIC HOT PLATES OF SOLID HARD ALUMINIUM WITH INSTALLED HEATING ELEMENTS \R\N- HEATING POWER 22 KW \R\N- HIGH PRESSURE ISOLATION PLATES \R\N- OPERATING TEMPERATURE: 90° C. \R\N- MAX. TEMPERATURE: 120° C. \R\N- SUPPLY: 400V/50 HZ \R\N- SAFETY ACCORDANCE WITH CE STANDARD \R\N\R\NSTANDARD EQUIPMENT:\R\N- MOVEMENT OF THE PRESS TABLE WITH RACK AND PINION PARALLEL GUIDANCE AT TWO CORNERS OF THE PRESS TABLE MADE FROM SELF-LUBRICATING MATERIAL \R\N- ELECTRONIC CONTROL UNIT FOR CONTROLLING AND MONITORING THE MACHINE \R\N- DIGITAL TIMER FOR SETTING THE PRESSING TIME AND AUTOMATIC OPENING \R\N- DIGITAL INPUT AND MONITORING OF THE PRESSING PRESSURE \R\N- TIMER FOR PROGRAMMING THE STARTING TIME OF HEATER\R\N- DIGITAL DISPLAY OF DIAGNOSIS AND FAULT MESSAGES \R\N- SAFETY CIRCUIT WITH TWO-HAND CONTROL \R\N- EMERGENCY STRIP WIRE \R\N- SAFETY HOLDER FOR THE LOWER PRESS TABLE \R\N\R\NOPTIONAL FOR AN EXTRA CHARGE:\R\N- OPENING / CYLINDER STROKE 600 MM \R\N- ELECTRICAL INACTIVATION OF THE LEFT CYLINDER BANK \R\N- ADDITIONAL CHARGE FOR ?GOLD-ANODISED? HEATING PLATES\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more STAR types: