1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-technical data
 tip height 110 mm
 centre distance 300 mm
 swing over cross slide 115 mm
 spindle bore 32 mm
 sled:
 longitudinal travel (z axis) 295 mm
 plan travel (x-axis) 220 mm
 turret slide: number 1
 number of positions revolver 8
 sleeve diameter 35 mm
 spindle retainer: camlock
 spindle speeds:
 continuously variable from 30 rpm to 6000 rpm
 tailstock quill recording:
 morse taper 2 mk
 quill stroke 100 mm
 feeds: continuously variable
 length of 0.1 mm / min up to 5000 mm/min
 map of 0.1 mm / min up to 5000 mm/min
 rapid traverse 10 m / min
 kw spindle motor 5.50
 connection 50 hz 3 x 380 volt
 machine weight 1350 kg
 dimensions machine:
 length 1700 mm
 1942 mm wide
 1774 mm

miscellaneous accessories:
 lighting
 coolant system
 splash guard cabin complete
 central lubrication system
 electronic handwheel
 interface rs 232
 c axis with interpolation
 chip conveyor
 tool holder set
 driven tool holders
 collet chucks
 bucher TECHNICAL DATA TIP HEIGHT 110 MM CENTRE DISTANCE 300 MM SWING OVER CROSS SLIDE 115 MM SPINDLE BORE 32 MM SLED: LONGITUDINAL TRAVEL (Z AXIS) 295 MM PLAN TRAVEL (X-AXIS) 220 MM TURRET SLIDE: NUMBER 1 NUMBER OF POSITIONS REVOLVER 8 SLEEVE DIAMETER 35 MM SPINDLE RETAINER: CAMLOCK SPINDLE SPEEDS: CONTINUOUSLY VARIABLE FROM 30 RPM TO 6000 RPM TAILSTOCK QUILL RECORDING: MORSE TAPER 2 MK QUILL STROKE 100 MM FEEDS: CONTINUOUSLY VARIABLE LENGTH OF 0.1 MM / MIN UP TO 5000 MM/MIN MAP OF 0.1 MM / MIN UP TO 5000 MM/MIN RAPID TRAVERSE 10 M / MIN KW SPINDLE MOTOR 5.50 CONNECTION 50 HZ 3 X 380 VOLT MACHINE WEIGHT 1350 KG DIMENSIONS MACHINE: LENGTH 1700 MM 1942 MM WIDE 1774 MM MISCELLANEOUS ACCESSORIES: LIGHTING COOLANT SYSTEM SPLASH GUARD CABIN COMPLETE CENTRAL LUBRICATION SYSTEM ELECTRONIC HANDWHEEL INTERFACE RS 232 C AXIS WITH INTERPOLATION CHIP CONVEYOR TOOL HOLDER SET DRIVEN TOOL HOLDERS COLLET CHUCKS BUCHER
Vendedor: Maschinenhandel Eersel
Año de construcción: usado
Precio: used machinery auction RESALE 9.500 €
Ubicación: Land-weight approx.: 2000 kg<br/>dimensions (l x w x h) approx.: 5670 x 1100 x 1700 mm<br/>description: tsugami bs 18(be) 5 axis lathe<br> <br> serial number 294<br> operating hours approx. 49740 h<br> chucking barstock diameter 3 - 18 mm, max drilling diameter 7 mm, max. tapping diameter m6, max. sub-spindle chucking diameter 18 mm<br> main spindle speeds 200 - 5000 min/1, total tool number 16, tool size 12 x 12 x 85 mm, rapid traverse rate 18 m/min (x1 x y: 12 m/min), controllable axes 5<br> for main spindle 1,1/3,7 kw, for sub-spindle 0,65/1,1 kw<br> power source requirements 16 kva, air pressure more than 0,4 mpa, air volume 50 n l/min<br> in addition 1 bar feeder manufacturer lns type thb 22-4, year of construction 1998, serial number 12486-98, bar length max 3000 mm<br> machine is sold without filter station<br> control fanuc le 1<br> WEIGHT APPROX.: 2000 KG
DIMENSIONS (L X W X H) APPROX.: 5670 X 1100 X 1700 MM
DESCRIPTION: TSUGAMI BS 18(BE) 5 AXIS LATHE

SERIAL NUMBER 294
OPERATING HOURS APPROX. 49740 H
CHUCKING BARSTOCK DIAMETER 3 - 18 MM, MAX DRILLING DIAMETER 7 MM, MAX. TAPPING DIAMETER M6, MAX. SUB-SPINDLE CHUCKING DIAMETER 18 MM
MAIN SPINDLE SPEEDS 200 - 5000 MIN/1, TOTAL TOOL NUMBER 16, TOOL SIZE 12 X 12 X 85 MM, RAPID TRAVERSE RATE 18 M/MIN (X1 X Y: 12 M/MIN), CONTROLLABLE AXES 5
FOR MAIN SPINDLE 1,1/3,7 KW, FOR SUB-SPINDLE 0,65/1,1 KW
POWER SOURCE REQUIREMENTS 16 KVA, AIR PRESSURE MORE THAN 0,4 MPA, AIR VOLUME 50 N L/MIN
IN ADDITION 1 BAR FEEDER MANUFACTURER LNS TYPE THB 22-4, YEAR OF CONSTRUCTION 1998, SERIAL NUMBER 12486-98, BAR LENGTH MAX 3000 MM
MACHINE IS SOLD WITHOUT FILTER STATION
CONTROL FANUC LE 1
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 225.000 €
Ubicación: Land-autom. shelf stock or akl, 7.584 shelf plots, 250 kg load capacity, tablarmaã?e 1.230 mm x 620 mm x 150 mm / 250 mm - used -:
 
price from site: â?¬225.000.-(net) plus montages etc.!
 
 
2-g shelf warehouse with just deep storage and conveyor systems for the connection of 2 jobs
 
manufacturer: tgw, a-4600 wels
type: shelf storage
year of construction / operation: 07.2007
 description:
â·         length of the streets: ca 51m
â·         height of the shelves: ca 9, 3 m
â·         sprinkler system: no
 stacker cranes
o number: 2
o type: stratus, lifting: spectra
 rack system
o number shelf location: 7.584
specialist load: 250 kg
o shelves:
⧠number of shelves: 5.280 pcs., galvanized steel (2mmm), smooth ground on 2 opposite sides with bar code tags
⧠dimensions: 1.230mm x 620mm x 150mm / 250mm
⧠sektorierung of the shelves possible
â·         conveyor: 1 cross reverse thrust car of the two streets and two jobs connects
â·         number of jobs: 2 - concurrent use of paging possible /
â·         system performance:
o rack serving unit: based on 76 and paging / h in the double play
 condition: good
available: from approximately april 2020!
location: austria
 
more photos on request! AUTOM. SHELF STOCK OR AKL, 7.584 SHELF PLOTS, 250 KG LOAD CAPACITY, TABLARMA&ATILDE;?E 1.230 MM X 620 MM X 150 MM / 250 MM - USED -: PRICE FROM SITE: &ACIRC;?&NOT;225.000.-(NET) PLUS MONTAGES ETC.! 2-G SHELF WAREHOUSE WITH JUST DEEP STORAGE AND CONVEYOR SYSTEMS FOR THE CONNECTION OF 2 JOBS MANUFACTURER: TGW, A-4600 WELS TYPE: SHELF STORAGE YEAR OF CONSTRUCTION / OPERATION: 07.2007 DESCRIPTION: &ACIRC;&MIDDOT; LENGTH OF THE STREETS: CA 51M &ACIRC;&MIDDOT; HEIGHT OF THE SHELVES: CA 9, 3 M &ACIRC;&MIDDOT; SPRINKLER SYSTEM: NO STACKER CRANES O NUMBER: 2 O TYPE: STRATUS, LIFTING: SPECTRA RACK SYSTEM O NUMBER SHELF LOCATION: 7.584 SPECIALIST LOAD: 250 KG O SHELVES: &ACIRC;&SECT; NUMBER OF SHELVES: 5.280 PCS., GALVANIZED STEEL (2MMM), SMOOTH GROUND ON 2 OPPOSITE SIDES WITH BAR CODE TAGS &ACIRC;&SECT; DIMENSIONS: 1.230MM X 620MM X 150MM / 250MM &ACIRC;&SECT; SEKTORIERUNG OF THE SHELVES POSSIBLE &ACIRC;&MIDDOT; CONVEYOR: 1 CROSS REVERSE THRUST CAR OF THE TWO STREETS AND TWO JOBS CONNECTS &ACIRC;&MIDDOT; NUMBER OF JOBS: 2 - CONCURRENT USE OF PAGING POSSIBLE / &ACIRC;&MIDDOT; SYSTEM PERFORMANCE: O RACK SERVING UNIT: BASED ON 76 AND PAGING / H IN THE DOUBLE PLAY CONDITION: GOOD AVAILABLE: FROM APPROXIMATELY APRIL 2020! LOCATION: AUSTRIA MORE PHOTOS ON REQUEST!
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Precio: used machinery auction RESALE 7.850 €
Ubicación: Land-weight approx.: 3000 kg<br/>dimensions (l x w x h) approx.: 6700 x 1650 x 1600 mm<br/>description: tsugami np 32 cp lathe<br> <br> serial number 7156<br> spindle speed 35 - 4500 upm, spindle motor ac 5,5/7,5 kw<br> chuckable barstock diameters 8 - 32 mm<br> slide travel distance x= 85 mm, y = 115 mm, z = 215 mm<br> rapid traverse speed 8 m/min<br> rotary-tool speed 224 - 2240 rpm<br> 2 turrets with 6 places each of which the rear one can be equipped with appropriate tools<br> in addition 1 bar feeder manufacturer sameca type monosam d 32, year of construction 1986, serial number 8178, bar length max. 3000 mm<br> in addition 1 transformer manufacturer paul prengel, 1 setting device, 2 driven tools, various tool holders without equipment<br> control system manufacturer fanuc<br> WEIGHT APPROX.: 3000 KG
DIMENSIONS (L X W X H) APPROX.: 6700 X 1650 X 1600 MM
DESCRIPTION: TSUGAMI NP 32 CP LATHE

SERIAL NUMBER 7156
SPINDLE SPEED 35 - 4500 UPM, SPINDLE MOTOR AC 5,5/7,5 KW
CHUCKABLE BARSTOCK DIAMETERS 8 - 32 MM
SLIDE TRAVEL DISTANCE X= 85 MM, Y = 115 MM, Z = 215 MM
RAPID TRAVERSE SPEED 8 M/MIN
ROTARY-TOOL SPEED 224 - 2240 RPM
2 TURRETS WITH 6 PLACES EACH OF WHICH THE REAR ONE CAN BE EQUIPPED WITH APPROPRIATE TOOLS
IN ADDITION 1 BAR FEEDER MANUFACTURER SAMECA TYPE MONOSAM D 32, YEAR OF CONSTRUCTION 1986, SERIAL NUMBER 8178, BAR LENGTH MAX. 3000 MM
IN ADDITION 1 TRANSFORMER MANUFACTURER PAUL PRENGEL, 1 SETTING DEVICE, 2 DRIVEN TOOLS, VARIOUS TOOL HOLDERS WITHOUT EQUIPMENT
CONTROL SYSTEM MANUFACTURER FANUC
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-machine type lathe - cycle controlled make gildemeister nef type plus 500 year 1998
control type cnc forkhart 315 mm three-back chuck
storage location eersel
country of origin germany delivery immediately cargo basis exw technical details
control heidenhain manual plus rotary diameter 500 mm turning diameter over slide 290 mm turning length 1000 mm plan route 250 mm chuck diameter of 260 mm spindle speeds gear-unit stage 1 80-250 1 rpm 
spindle speeds gear-unit stage 2 20-710 1/min. 
spindle speed gear level 3 80-2800 1/min. 
spindle drive 11 kw torque spindle 100% ed 1050 nm max spindle nose according to din 55027 - size 8 spindle bore 70 mm hollow cone of spindle nose metric 80 spindle diameter in the vord. camp 100 mm feed force longitudinal / plan 10 / 5 kn feed 5 m / min rapid traverse - longitudinal/plan 8 / 6 m / min tool holder multifix c tailstock quill diameter 80 mm tailstock hub 180 mm tailstock spindle mount mt 5 weight - machine 3.20 x 1.75 x 1.85 m additional information
grundig heidenhain manual plus control
 MACHINE TYPE LATHE - CYCLE CONTROLLED MAKE GILDEMEISTER NEF TYPE PLUS 500 YEAR 1998 CONTROL TYPE CNC FORKHART 315 MM THREE-BACK CHUCK STORAGE LOCATION EERSEL COUNTRY OF ORIGIN GERMANY DELIVERY IMMEDIATELY CARGO BASIS EXW TECHNICAL DETAILS CONTROL HEIDENHAIN MANUAL PLUS ROTARY DIAMETER 500 MM TURNING DIAMETER OVER SLIDE 290 MM TURNING LENGTH 1000 MM PLAN ROUTE 250 MM CHUCK DIAMETER OF 260 MM SPINDLE SPEEDS GEAR-UNIT STAGE 1 80-250 1 RPM SPINDLE SPEEDS GEAR-UNIT STAGE 2 20-710 1/MIN. SPINDLE SPEED GEAR LEVEL 3 80-2800 1/MIN. SPINDLE DRIVE 11 KW TORQUE SPINDLE 100% ED 1050 NM MAX SPINDLE NOSE ACCORDING TO DIN 55027 - SIZE 8 SPINDLE BORE 70 MM HOLLOW CONE OF SPINDLE NOSE METRIC 80 SPINDLE DIAMETER IN THE VORD. CAMP 100 MM FEED FORCE LONGITUDINAL / PLAN 10 / 5 KN FEED 5 M / MIN RAPID TRAVERSE - LONGITUDINAL/PLAN 8 / 6 M / MIN TOOL HOLDER MULTIFIX C TAILSTOCK QUILL DIAMETER 80 MM TAILSTOCK HUB 180 MM TAILSTOCK SPINDLE MOUNT MT 5 WEIGHT - MACHINE 3.20 X 1.75 X 1.85 M ADDITIONAL INFORMATION GRUNDIG HEIDENHAIN MANUAL PLUS CONTROL
Vendedor: Maschinenhandel Eersel
Año de construcción: usado
Ubicación: Land-made of plastic\r\nfor the most common german types in stock, others on request\r\nplease indicate your machine´s brand and type. MADE OF PLASTIC\R\NFOR THE MOST COMMON GERMAN TYPES IN STOCK, OTHERS ON REQUEST\R\NPLEASE INDICATE YOUR MACHINE´S BRAND AND TYPE.
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-gildemeister ctx 200 s2
 year: 1998
 heidenhain machine is prepared for the bar magazine.

with many tool box ca. 50!
 workspace
-turndiam over coverage 440 mm
-turndiam 210 mm
 x travel 160 mm
 longitudinal travel z 350 mm
 tool carrier
 -universal disc turret - tool station number 12 vdi 30

tailstock
-quill 50mm
-quill stroke 120 mm
quill recording mk3

machine dimensions - chip conveyor lxwxh 3930x1651x1690mm
-weight approx. 3000kg

 GILDEMEISTER CTX 200 S2 YEAR: 1998 HEIDENHAIN MACHINE IS PREPARED FOR THE BAR MAGAZINE. WITH MANY TOOL BOX CA. 50! WORKSPACE -TURNDIAM OVER COVERAGE 440 MM -TURNDIAM 210 MM X TRAVEL 160 MM LONGITUDINAL TRAVEL Z 350 MM TOOL CARRIER -UNIVERSAL DISC TURRET - TOOL STATION NUMBER 12 VDI 30 TAILSTOCK -QUILL 50MM -QUILL STROKE 120 MM QUILL RECORDING MK3 MACHINE DIMENSIONS - CHIP CONVEYOR LXWXH 3930X1651X1690MM -WEIGHT APPROX. 3000KG
Vendedor: Maschinenhandel Eersel
Año de construcción: usado
Ubicación: Land-turning diameter:    300 mm<br/>turning length:   1000 mm<br/>control:  <br/>--------------------------------------------------:  <br/>basic functions:  <br/>- number of spindles:      1  <br/>- number of turrets:      1  <br/>- live positions: yes:        <br/>- number of c-axes:      1  <br/>working range turning:  <br/>- swing diameter (max):    600 mm<br/>- turning diameter (max):    300 mm<br/>- worpiece length max.:   1000 mm<br/>main spindle:  <br/>- spindle revolutions (max):   3150 /min<br/>x/z slide:  <br/>- traverse velocity z (max):   5000 mm/min<br/>- traverse velocity x (max):   5000 mm/min<br/>- rapid traverse z:  10000 mm/min<br/>- rapid traverse x:  10000 mm/min<br/>- tool fixture: turret:        <br/>tailstock:  <br/>- distance betw. centers (max):   1000 mm<br/>- sleeve stroke:    180 mm<br/>- sleeve diameter:    100 mm<br/>electrical specifications:  <br/>- total power consumption:     30 kw<br/>- mains voltage:    380 v<br/>- mains frequency:     50 hz<br/><br/><br/><br/><br/> TURNING DIAMETER: 300 MM
TURNING LENGTH: 1000 MM
CONTROL:
--------------------------------------------------:
BASIC FUNCTIONS:
- NUMBER OF SPINDLES: 1
- NUMBER OF TURRETS: 1
- LIVE POSITIONS: YES:
- NUMBER OF C-AXES: 1
WORKING RANGE TURNING:
- SWING DIAMETER (MAX): 600 MM
- TURNING DIAMETER (MAX): 300 MM
- WORPIECE LENGTH MAX.: 1000 MM
MAIN SPINDLE:
- SPINDLE REVOLUTIONS (MAX): 3150 /MIN
X/Z SLIDE:
- TRAVERSE VELOCITY Z (MAX): 5000 MM/MIN
- TRAVERSE VELOCITY X (MAX): 5000 MM/MIN
- RAPID TRAVERSE Z: 10000 MM/MIN
- RAPID TRAVERSE X: 10000 MM/MIN
- TOOL FIXTURE: TURRET:
TAILSTOCK:
- DISTANCE BETW. CENTERS (MAX): 1000 MM
- SLEEVE STROKE: 180 MM
- SLEEVE DIAMETER: 100 MM
ELECTRICAL SPECIFICATIONS:
- TOTAL POWER CONSUMPTION: 30 KW
- MAINS VOLTAGE: 380 V
- MAINS FREQUENCY: 50 HZ




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-used dmg gildemeister twin 65 with y-b axis
control siemens 840 d powerline

technical data:
max. swing diameter  mm 250
max. turning diameter  mm 200
spindle distance mm 900

main spindle
max speed min-1 5,000
max bar passage mm 66

counter spindle
max speed min-1 5,000
maximum partial bar passage 66 x 650 mm
travel x-z axis mm 175 / 670
tailstock mounted taper mt 4

2 turrets with driven tools
speed driven tools min-1 4,000

slide 1 (top turret)
travel x - z axis mm 300 / 600
travel y mm +/-40
swing angle b axis (turret) degree -135°/+ 45°

slide 2 (lower turret)
travel path x - z axis mm 180 / 650

accessories:
y axis upper turret
b-axis upper turret
tailstock on counter spindle slide
workpiece - pickup equipment with gripper and conveyor belt
collet chuck on main and sub spindle
short rod feeder
chip conveyor
increased coolant system 20 bar  USED DMG GILDEMEISTER TWIN 65 WITH Y-B AXIS CONTROL SIEMENS 840 D POWERLINE TECHNICAL DATA: MAX. SWING DIAMETER MM 250 MAX. TURNING DIAMETER MM 200 SPINDLE DISTANCE MM 900 MAIN SPINDLE MAX SPEED MIN-1 5,000 MAX BAR PASSAGE MM 66 COUNTER SPINDLE MAX SPEED MIN-1 5,000 MAXIMUM PARTIAL BAR PASSAGE 66 X 650 MM TRAVEL X-Z AXIS MM 175 / 670 TAILSTOCK MOUNTED TAPER MT 4 2 TURRETS WITH DRIVEN TOOLS SPEED DRIVEN TOOLS MIN-1 4,000 SLIDE 1 (TOP TURRET) TRAVEL X - Z AXIS MM 300 / 600 TRAVEL Y MM +/-40 SWING ANGLE B AXIS (TURRET) DEGREE -135°/+ 45° SLIDE 2 (LOWER TURRET) TRAVEL PATH X - Z AXIS MM 180 / 650 ACCESSORIES: Y AXIS UPPER TURRET B-AXIS UPPER TURRET TAILSTOCK ON COUNTER SPINDLE SLIDE WORKPIECE - PICKUP EQUIPMENT WITH GRIPPER AND CONVEYOR BELT COLLET CHUCK ON MAIN AND SUB SPINDLE SHORT ROD FEEDER CHIP CONVEYOR INCREASED COOLANT SYSTEM 20 BAR
Vendedor: GEMATEC GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: max. 500 mm<br/>turning length: max. 1.500 mm<br/>control: 840 d sl  siemens<br/>max. swing diameter: 800 mm<br/>main spindle::  <br/>max. rpm: 2.600 min/-1<br/>power capacity - main spindel: 22 / 33 kw<br/>max. torque: 263 nm<br/>chucking diameter: 315 - max. 500 mm<br/>type: ism 110 mm<br/>axis stroke::  <br/>x-axis: 360 mm<br/>y-axis: 120 (-55/+65) mm<br/>z-axis: 1.500 mm<br/>c-axis: 360 °<br/>turret::  <br/>tooling: 12 pos.<br/>driven statition: 12 pos<br/>tool taper: vdi 50 <br/>spindle speed - driven tool stations: max. 4.000 min -1<br/>tailstock::  <br/>taper of center: mk 4 <br/>diameter of quill: 110 mm<br/>tailstock adjustment: 1.600 mm<br/>feeds::  <br/>rapid traverse: x: 15 / z: 24 m/min<br/>total power requirement: 48 kw<br/>weight of the machine ca.: 8,5 t<br/>dimensions of the machine ca.: 5,0 x 3,0 x 2,5 m<br/>documents:  <br/>chip conveyor:  <br/>high pressure coolant: 8 / 15 bar <br/>three jaw chuck: smw 315 mm <br/>glas gauge:  <br/>c-axis:  <br/>y-axis:  <br/>tool drive mechanisum:  <br/>turret:  <br/>steady rest: 50 - 200mm <br/>tailstock: hydr. / autom. <br/>div. tool holder:  <br/>live tool holders:  <br/>cnc-turning- and millingcenter<br/>spinner - tc 800 l 110 mcy<br/><br/>- tool-drive<br/>- c-axis<br/>- y-axis<br/>- steady-rest 50-200mm<br/>- tailstock<br/><br/><br/><br/><br/> TURNING DIAMETER: MAX. 500 MM
TURNING LENGTH: MAX. 1.500 MM
CONTROL: 840 D SL SIEMENS
MAX. SWING DIAMETER: 800 MM
MAIN SPINDLE::
MAX. RPM: 2.600 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 22 / 33 KW
MAX. TORQUE: 263 NM
CHUCKING DIAMETER: 315 - MAX. 500 MM
TYPE: ISM 110 MM
AXIS STROKE::
X-AXIS: 360 MM
Y-AXIS: 120 (-55/+65) MM
Z-AXIS: 1.500 MM
C-AXIS: 360 °
TURRET::
TOOLING: 12 POS.
DRIVEN STATITION: 12 POS
TOOL TAPER: VDI 50
SPINDLE SPEED - DRIVEN TOOL STATIONS: MAX. 4.000 MIN -1
TAILSTOCK::
TAPER OF CENTER: MK 4
DIAMETER OF QUILL: 110 MM
TAILSTOCK ADJUSTMENT: 1.600 MM
FEEDS::
RAPID TRAVERSE: X: 15 / Z: 24 M/MIN
TOTAL POWER REQUIREMENT: 48 KW
WEIGHT OF THE MACHINE CA.: 8,5 T
DIMENSIONS OF THE MACHINE CA.: 5,0 X 3,0 X 2,5 M
DOCUMENTS:
CHIP CONVEYOR:
HIGH PRESSURE COOLANT: 8 / 15 BAR
THREE JAW CHUCK: SMW 315 MM
GLAS GAUGE:
C-AXIS:
Y-AXIS:
TOOL DRIVE MECHANISUM:
TURRET:
STEADY REST: 50 - 200MM
TAILSTOCK: HYDR. / AUTOM.
DIV. TOOL HOLDER:
LIVE TOOL HOLDERS:
CNC-TURNING- AND MILLINGCENTER
SPINNER - TC 800 L 110 MCY

- TOOL-DRIVE
- C-AXIS
- Y-AXIS
- STEADY-REST 50-200MM
- TAILSTOCK




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-technical data:

brand: weiler

type: primus 2

control: bosch cc 200

year: 1990

turning diameter 160 mm
turning length 500 mm
control sinumerik 820 t siemens
swing over bed 400 mm
swing over cross slide 220 mm
main spindle:
maximum speed 5,000 min / -1
-main spindle 23 kw
spindle bore 51 mm
usable rod diameter of 42 mm
chuck diameter 160 mm
spindle nose din 55026-b / 5
turret:
number of tool stations 12 pos.
shaft vdi 3425 / 30 mm
ã? 20 x 20 mm
tailstock:
tailstock displacement 450 mm
quill stroke 50 mm
clamping force of 5 kn
tailstock mount mt 3
procedures:
x 250 mm
z-axis 550 mm
total power 30 kw
machine weight approx. 4,0 t
space requirement approx. 3.0 x 2.0 x 2.0 m TECHNICAL DATA: BRAND: WEILER TYPE: PRIMUS 2 CONTROL: BOSCH CC 200 YEAR: 1990 TURNING DIAMETER 160 MM TURNING LENGTH 500 MM CONTROL SINUMERIK 820 T SIEMENS SWING OVER BED 400 MM SWING OVER CROSS SLIDE 220 MM MAIN SPINDLE: MAXIMUM SPEED 5,000 MIN / -1 -MAIN SPINDLE 23 KW SPINDLE BORE 51 MM USABLE ROD DIAMETER OF 42 MM CHUCK DIAMETER 160 MM SPINDLE NOSE DIN 55026-B / 5 TURRET: NUMBER OF TOOL STATIONS 12 POS. SHAFT VDI 3425 / 30 MM &ATILDE;? 20 X 20 MM TAILSTOCK: TAILSTOCK DISPLACEMENT 450 MM QUILL STROKE 50 MM CLAMPING FORCE OF 5 KN TAILSTOCK MOUNT MT 3 PROCEDURES: X 250 MM Z-AXIS 550 MM TOTAL POWER 30 KW MACHINE WEIGHT APPROX. 4,0 T SPACE REQUIREMENT APPROX. 3.0 X 2.0 X 2.0 M
Vendedor: A-Z Maschinenwelt
Año de construcción: usado
Ubicación: Land-turning diameter: 305 mm<br/>turning length: 477 mm<br/>control: winmax <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>winmax cnc control<br/>3-jaw chuck<br/>12 fold turret head<br/>tool presetting device<br/>tailstock<br/>chip conveyor<br/>coolant device<br/><br/>technische daten / technical details:<br/>max. drehdurchmesser / max. turning diameter    305    mm<br/>max. drehlänge / max. turning lenght    477    mm<br/>planweg (x) / cross way (x)    203    mm<br/>längsweg (z) / longitudinal way (z)    508    mm<br/>spindelbohrung / spindle hole    52    mm<br/>drehzahlbereich / spindle speed     4800    upm /rpm<br/>werkzeugrevolver / turret head    12    fach /holes<br/>eilgang x / rapid feed x    19    m/min<br/>eilgang z / rapid feed z    24    m/min.<br/>antriebsleistung spindel / drive capacity spindle    11    kw<br/>gewicht der maschine ca. / weight ca.    3800    kg<br/>technische daten, zubehör und beschreibung der maschine sind unverbindlich -<br/>technical data, accessories and description of the machine are not binding.<br/><br/><br/><br/><br/><br/> TURNING DIAMETER: 305 MM
TURNING LENGTH: 477 MM
CONTROL: WINMAX
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
WINMAX CNC CONTROL
3-JAW CHUCK
12 FOLD TURRET HEAD
TOOL PRESETTING DEVICE
TAILSTOCK
CHIP CONVEYOR
COOLANT DEVICE

TECHNISCHE DATEN / TECHNICAL DETAILS:
MAX. DREHDURCHMESSER / MAX. TURNING DIAMETER 305 MM
MAX. DREHLäNGE / MAX. TURNING LENGHT 477 MM
PLANWEG (X) / CROSS WAY (X) 203 MM
LäNGSWEG (Z) / LONGITUDINAL WAY (Z) 508 MM
SPINDELBOHRUNG / SPINDLE HOLE 52 MM
DREHZAHLBEREICH / SPINDLE SPEED 4800 UPM /RPM
WERKZEUGREVOLVER / TURRET HEAD 12 FACH /HOLES
EILGANG X / RAPID FEED X 19 M/MIN
EILGANG Z / RAPID FEED Z 24 M/MIN.
ANTRIEBSLEISTUNG SPINDEL / DRIVE CAPACITY SPINDLE 11 KW
GEWICHT DER MASCHINE CA. / WEIGHT CA. 3800 KG
TECHNISCHE DATEN, ZUBEHöR UND BESCHREIBUNG DER MASCHINE SIND UNVERBINDLICH -
TECHNICAL DATA, ACCESSORIES AND DESCRIPTION OF THE MACHINE ARE NOT BINDING.





Vendedor: Gustav Schönberger GmbH
Año de construcción: usado
Ubicación: Land-technical data:

brand: weiler

type: ud 42

control: siemens sinumerik 820 t

year: 1990

weight 2800kg
dimensions: 2600mmx1900mmx2000mm without chip conveyor
inclined bed lathe with 12 x turret vdi diameter 20 mm
 power 23 kw
workspace
tip height 208 mm
sindeldurchlass 51mm
chuck 160 mm
circular diameter 330 mm
swing over cross slide 145 mm
maximum working length between top 360 mm
a5 spindle head
hydraulic tailstock recording mk3
coolant system in the chip conveyor
hydraulic cooler

TECHNICAL DATA: BRAND: WEILER TYPE: UD 42 CONTROL: SIEMENS SINUMERIK 820 T YEAR: 1990 WEIGHT 2800KG DIMENSIONS: 2600MMX1900MMX2000MM WITHOUT CHIP CONVEYOR INCLINED BED LATHE WITH 12 X TURRET VDI DIAMETER 20 MM POWER 23 KW WORKSPACE TIP HEIGHT 208 MM SINDELDURCHLASS 51MM CHUCK 160 MM CIRCULAR DIAMETER 330 MM SWING OVER CROSS SLIDE 145 MM MAXIMUM WORKING LENGTH BETWEEN TOP 360 MM A5 SPINDLE HEAD HYDRAULIC TAILSTOCK RECORDING MK3 COOLANT SYSTEM IN THE CHIP CONVEYOR HYDRAULIC COOLER
Vendedor: A-Z Maschinenwelt
Año de construcción: usado
Ubicación: Land-x-travel: 750 mm<br/>y-travel: 560 mm<br/>z-travel: 600 mm<br/>control: heidenhain itnc 530 <br/>total power requirement: 70 kw<br/>weight of the machine ca.: 11.000 kg<br/>dimensions of the machine ca.:  m<br/>d e c k e l   m a h o      (germany)<br/>vertical cnc machining centre with high speed linear drives <br/>in 3 axis and in double column design for high precision work<br/>model  dmc 75 v linear                         year      2005<br/>_______________________________________________________                          <br/><br/>working range: longitudinal stroke x axis                      750    mm<br/>               vertical stroke     z axis                      600    mm<br/>               cross stroke        y axis                      560    mm<br/><br/>table clamping size                                      950 x 650    mm<br/>max. table load                                              1.000    kg<br/>max. height of workpiece                                       600    mm<br/><br/>tool holder cone                                            hsk 63<br/>spindle (kessler) speeds                                    18,000    rpm<br/>torque, max.                                                86/130    nm<br/>spindle run-up time / stop time                                3.2    sec<br/><br/>feeds / quickfeeds, x, y and z axes max.                    90,000    mm/min<br/>feed force                                            11.000/9.500    n<br/>axis acceleration, x / y / z axes                     15 / 12 / 18    m/s<br/><br/>spindle drive                     25/35    kw<br/>total electrical load, approx.       75    kw  -  400 v  -  50    hz<br/>weight, approx.                  11.000    kg<br/><br/>accessories / special features:<br/><br/>this machine is very interesting because of the very stable double column <br/>portal design and with the modern linear technology for fast and powerful <br/>high precision work.<br/> <br/>*   heidenhain modern  cnc control system model itnc 530 in 3 axes, with all <br/>    the usual options, cycles and sub programmes.<br/>*   table moves only in x axis and allows a comfortable loading of heavy <br/>    workpieces<br/>*   30-position disktype tool magazine for max. tool Ø 100, 140 and 200 mm x max. <br/>    length 300 mm.  max. weight 10 kg.  cut-to-cut time 6 sec. pick-up by <br/>    main spindle.<br/>*   blum tool-breakage control, blum receiver for renishaw ?head, no head <br/>    available.<br/>*   double linear motors ensure very fast feed motions and strong feed power, <br/>    equipped with own cooling system.<br/>*   kessler milling spindle, liquid-cooled, steplessly programmable up to 18.000 rpm <br/>*   completely covered working area with 2 sliding doors, one with spin-type bull-eye.<br/>*   knoll coolant device with scraper-type chip conveyor and pressure pomp.<br/>*   spindle working hours approx. 23.000  h<br/><br/>condition   :     very good.  machine can soon be inspected under power.<br/>delivery    :     ex stock, as inspected.            <br/>payment     :     net, after conclusion of contract.<br/><br/><br/><br/><br/><br/> X-TRAVEL: 750 MM
Y-TRAVEL: 560 MM
Z-TRAVEL: 600 MM
CONTROL: HEIDENHAIN ITNC 530
TOTAL POWER REQUIREMENT: 70 KW
WEIGHT OF THE MACHINE CA.: 11.000 KG
DIMENSIONS OF THE MACHINE CA.: M
D E C K E L M A H O (GERMANY)
VERTICAL CNC MACHINING CENTRE WITH HIGH SPEED LINEAR DRIVES
IN 3 AXIS AND IN DOUBLE COLUMN DESIGN FOR HIGH PRECISION WORK
MODEL DMC 75 V LINEAR YEAR 2005
_______________________________________________________

WORKING RANGE: LONGITUDINAL STROKE X AXIS 750 MM
VERTICAL STROKE Z AXIS 600 MM
CROSS STROKE Y AXIS 560 MM

TABLE CLAMPING SIZE 950 X 650 MM
MAX. TABLE LOAD 1.000 KG
MAX. HEIGHT OF WORKPIECE 600 MM

TOOL HOLDER CONE HSK 63
SPINDLE (KESSLER) SPEEDS 18,000 RPM
TORQUE, MAX. 86/130 NM
SPINDLE RUN-UP TIME / STOP TIME 3.2 SEC

FEEDS / QUICKFEEDS, X, Y AND Z AXES MAX. 90,000 MM/MIN
FEED FORCE 11.000/9.500 N
AXIS ACCELERATION, X / Y / Z AXES 15 / 12 / 18 M/S

SPINDLE DRIVE 25/35 KW
TOTAL ELECTRICAL LOAD, APPROX. 75 KW - 400 V - 50 HZ
WEIGHT, APPROX. 11.000 KG

ACCESSORIES / SPECIAL FEATURES:

THIS MACHINE IS VERY INTERESTING BECAUSE OF THE VERY STABLE DOUBLE COLUMN
PORTAL DESIGN AND WITH THE MODERN LINEAR TECHNOLOGY FOR FAST AND POWERFUL
HIGH PRECISION WORK.

* HEIDENHAIN MODERN CNC CONTROL SYSTEM MODEL ITNC 530 IN 3 AXES, WITH ALL
THE USUAL OPTIONS, CYCLES AND SUB PROGRAMMES.
* TABLE MOVES ONLY IN X AXIS AND ALLOWS A COMFORTABLE LOADING OF HEAVY
WORKPIECES
* 30-POSITION DISKTYPE TOOL MAGAZINE FOR MAX. TOOL Ø 100, 140 AND 200 MM X MAX.
LENGTH 300 MM. MAX. WEIGHT 10 KG. CUT-TO-CUT TIME 6 SEC. PICK-UP BY
MAIN SPINDLE.
* BLUM TOOL-BREAKAGE CONTROL, BLUM RECEIVER FOR RENISHAW ?HEAD, NO HEAD
AVAILABLE.
* DOUBLE LINEAR MOTORS ENSURE VERY FAST FEED MOTIONS AND STRONG FEED POWER,
EQUIPPED WITH OWN COOLING SYSTEM.
* KESSLER MILLING SPINDLE, LIQUID-COOLED, STEPLESSLY PROGRAMMABLE UP TO 18.000 RPM
* COMPLETELY COVERED WORKING AREA WITH 2 SLIDING DOORS, ONE WITH SPIN-TYPE BULL-EYE.
* KNOLL COOLANT DEVICE WITH SCRAPER-TYPE CHIP CONVEYOR AND PRESSURE POMP.
* SPINDLE WORKING HOURS APPROX. 23.000 H

CONDITION : VERY GOOD. MACHINE CAN SOON BE INSPECTED UNDER POWER.
DELIVERY : EX STOCK, AS INSPECTED.
PAYMENT : NET, AFTER CONCLUSION OF CONTRACT.





Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-year built 2001
diameter rotation on the bar 420 mm 
diameter admitted on the sled 300 mm 
maximum distance between centers 500 mm
maximum turning diameter 200 mm 
bar capacity - diameter 51 mm 
spindle nose attack asa 2 - 6 YEAR BUILT 2001 DIAMETER ROTATION ON THE BAR 420 MM DIAMETER ADMITTED ON THE SLED 300 MM MAXIMUM DISTANCE BETWEEN CENTERS 500 MM MAXIMUM TURNING DIAMETER 200 MM BAR CAPACITY - DIAMETER 51 MM SPINDLE NOSE ATTACK ASA 2 - 6 " SPINDLE SPEEDS 25-4000 REV / MIN MOTOR POWER MAIN SPINDLE 9/11 KW 12 POSITIONS TURRET X AXIS TRAVEL 170 MM TRAVEL Z-AXIS 400 MM GROUP TAILSTOCK 350 MM TAILSTOCK QUILL STROKE 60 MM FANUC OT NET WEIGHT 5500 KG 3640X1850X2000 MM DIMENSIONS EVACUATOR CHIPS PRESETTING
Vendedor: Industrialbay
Año de construcción: usado
Ubicación: Land-x-travel: 400 mm<br/>y-travel: 250 mm<br/>workpiece height: 450 mm<br/>total power requirement: 8 kw<br/>weight of the machine ca.: 3500 kg<br/>dimensions of the machine ca.:  m<br/>h a u s e r                (switzerland)<br/>vertical precision jig grinder<br/>model    s 3 ? 111  with 2-axis digital read-out<br/>year    1982 but constantly reconditioned a. maintained      # 0210<br/>______________________________________________________________________<br/><br/>table size approx.                                          600 x 380    mm<br/>table load capacity approx.                                       300    kg<br/><br/>table travel longitudinal max.     (x)                            400    mm<br/>table travel cross max.            (y)                            250    mm<br/><br/>vertical adjustment of grinding head max.    (w)                  450    mm<br/>grinding spindle stroke max.                 (z)                  120    mm<br/>number of strokes of grinding head                             0,5-12    m/min<br/><br/>vertical distance between table/grinding spindle max.           0-500    mm<br/>throat of grinding spindle                                        340    mm<br/>conical grinding max.                                              16    °<br/>grinding-Ø bore approx.                                           230    mm<br/><br/>18 spindle speeds acc.to spindle motor infinitely <br/>variable                                                 4.500-80.000    rpm<br/><br/>fine feed in x/y and in z-axis                          2-1.500/6.000    mm/min<br/>planetary speed  (c)                                          5 - 250    rpm<br/><br/>total electrical load approx.    8,5 kw - 400 v ? 50    cycles<br/>weight approx.                 3.500 kg<br/><br/>accessories / special features:<br/><br/>?    elesta digital read-out  for the x and y-axes. <br/>?    refu frequency controller for adjusting stepless speeds on grinding spindle<br/>?    u-axis for control independant  automatic bore grinding up to a grinding <br/>     dia. of 300 mm<br/>     also with intermediate plates for large diameter and for conical grinding, <br/>     with automatic switch off . <br/>?    tool cabinet with various accessories, such as: clamping devices, <br/>     grinding pins, intermediate plates, centering microscope, centering device <br/>     with feeler, 4 dressing devices to mount it on table, square table <br/>     400 x 400 mm, coolant nozzles, collets, etc.<br/>?    sep. hydraulic system, sep. switch cabinet, sep. coolant device, sep. <br/>     control panel, etc.<br/>?    groove grinding facility with 3 different grinding wheel holders <br/>     (small/medium/large)<br/>?    original rotary table Ø 300 mm, contact meter for start the gringing cycle, <br/>     spare parts, etc.<br/><br/>condition   :    very good ? can be inspected in operation under current, <br/>delivery    :    ex stock ? as inspected       <br/>payment     :    net ? after completion of contract<br/><br/><br/><br/><br/><br/><br/><br/><br/> X-TRAVEL: 400 MM
Y-TRAVEL: 250 MM
WORKPIECE HEIGHT: 450 MM
TOTAL POWER REQUIREMENT: 8 KW
WEIGHT OF THE MACHINE CA.: 3500 KG
DIMENSIONS OF THE MACHINE CA.: M
H A U S E R (SWITZERLAND)
VERTICAL PRECISION JIG GRINDER
MODEL S 3 ? 111 WITH 2-AXIS DIGITAL READ-OUT
YEAR 1982 BUT CONSTANTLY RECONDITIONED A. MAINTAINED # 0210
______________________________________________________________________

TABLE SIZE APPROX. 600 X 380 MM
TABLE LOAD CAPACITY APPROX. 300 KG

TABLE TRAVEL LONGITUDINAL MAX. (X) 400 MM
TABLE TRAVEL CROSS MAX. (Y) 250 MM

VERTICAL ADJUSTMENT OF GRINDING HEAD MAX. (W) 450 MM
GRINDING SPINDLE STROKE MAX. (Z) 120 MM
NUMBER OF STROKES OF GRINDING HEAD 0,5-12 M/MIN

VERTICAL DISTANCE BETWEEN TABLE/GRINDING SPINDLE MAX. 0-500 MM
THROAT OF GRINDING SPINDLE 340 MM
CONICAL GRINDING MAX. 16 °
GRINDING-Ø BORE APPROX. 230 MM

18 SPINDLE SPEEDS ACC.TO SPINDLE MOTOR INFINITELY
VARIABLE 4.500-80.000 RPM

FINE FEED IN X/Y AND IN Z-AXIS 2-1.500/6.000 MM/MIN
PLANETARY SPEED (C) 5 - 250 RPM

TOTAL ELECTRICAL LOAD APPROX. 8,5 KW - 400 V ? 50 CYCLES
WEIGHT APPROX. 3.500 KG

ACCESSORIES / SPECIAL FEATURES:

? ELESTA DIGITAL READ-OUT FOR THE X AND Y-AXES.
? REFU FREQUENCY CONTROLLER FOR ADJUSTING STEPLESS SPEEDS ON GRINDING SPINDLE
? U-AXIS FOR CONTROL INDEPENDANT AUTOMATIC BORE GRINDING UP TO A GRINDING
DIA. OF 300 MM
ALSO WITH INTERMEDIATE PLATES FOR LARGE DIAMETER AND FOR CONICAL GRINDING,
WITH AUTOMATIC SWITCH OFF .
? TOOL CABINET WITH VARIOUS ACCESSORIES, SUCH AS: CLAMPING DEVICES,
GRINDING PINS, INTERMEDIATE PLATES, CENTERING MICROSCOPE, CENTERING DEVICE
WITH FEELER, 4 DRESSING DEVICES TO MOUNT IT ON TABLE, SQUARE TABLE
400 X 400 MM, COOLANT NOZZLES, COLLETS, ETC.
? SEP. HYDRAULIC SYSTEM, SEP. SWITCH CABINET, SEP. COOLANT DEVICE, SEP.
CONTROL PANEL, ETC.
? GROOVE GRINDING FACILITY WITH 3 DIFFERENT GRINDING WHEEL HOLDERS
(SMALL/MEDIUM/LARGE)
? ORIGINAL ROTARY TABLE Ø 300 MM, CONTACT METER FOR START THE GRINGING CYCLE,
SPARE PARTS, ETC.

CONDITION : VERY GOOD ? CAN BE INSPECTED IN OPERATION UNDER CURRENT,
DELIVERY : EX STOCK ? AS INSPECTED
PAYMENT : NET ? AFTER COMPLETION OF CONTRACT








Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Precio: 11.300 €
Ubicación: Land- we offer for sale:

pallet racks for 960 sites

manufacturer: euro stock

material:

19 uprights, approx. 6,200 x 1,000 mm

69 uprights, approx. 7,000 x 1,000 mm

480 traverses approximately 2,900 x k140 mm

960 pins 176 ground anchor m 12 mm

technical data:

frame elevation 6,200-7.000 mm

shelf depth 1000 mm

load range 933 kg

payload field 8,500 kg

payload specialist 2,800 kg

frame blue

beams blue

in stock: 21698 harsefeld

we offer a comprehensive range of new and used racks and accessories and assist in your planning.

we offer new and used pallet racks, en 15635 withstanding scrutiny according to din.

eth professional shelf since 1983.  WE OFFER FOR SALE: PALLET RACKS FOR 960 SITES MANUFACTURER: EURO STOCK MATERIAL: 19 UPRIGHTS, APPROX. 6,200 X 1,000 MM 69 UPRIGHTS, APPROX. 7,000 X 1,000 MM 480 TRAVERSES APPROXIMATELY 2,900 X K140 MM 960 PINS 176 GROUND ANCHOR M 12 MM TECHNICAL DATA: FRAME ELEVATION 6,200-7.000 MM SHELF DEPTH 1000 MM LOAD RANGE 933 KG PAYLOAD FIELD 8,500 KG PAYLOAD SPECIALIST 2,800 KG FRAME BLUE BEAMS BLUE IN STOCK: 21698 HARSEFELD WE OFFER A COMPREHENSIVE RANGE OF NEW AND USED RACKS AND ACCESSORIES AND ASSIST IN YOUR PLANNING. WE OFFER NEW AND USED PALLET RACKS, EN 15635 WITHSTANDING SCRUTINY ACCORDING TO DIN. ETH PROFESSIONAL SHELF SINCE 1983.
Vendedor: eth Ericus Transport u. Handelsges.mbH
Año de construcción: usado
Ubicación: Land-grinding diameter: 250,350,450 mm<br/>grinding length: 1500 mm<br/>centre height: 125,175,225 mm<br/>grinding wheel diameter: 400 mm<br/>grinding wheel width: 50 mm<br/>bore: 127 mm<br/>: mk5 <br/>work piece spindle speed: 20-400 u/min<br/>workpiece spindle - bore:  mm<br/>grinding head swivelling: 360 °<br/>grinding spindle head - swivable: 180 + - °<br/>grinding spindle speed: 1500,1700,2200 u/min<br/>: 0,001-0,030 mm/Ø<br/>: 0-0,95 mm/Ø<br/>: ± 6 °<br/>longitudinal feed of the table: 1750 mm<br/>table speeds: 0,02-6 m/min<br/>: 130 kg<br/>: 130 inkl. spannugkg kg<br/>:  mm<br/>grinding depth:  mm<br/>: 80 mm<br/>total power requirement: 6,5 kw<br/>weight of the machine ca.: 2,9 t<br/>dimensions of the machine ca.: 5,6 x 2,0 m<br/>overhauled with geometric kellenberger protocoll.<br/><br/>standard with:<br/><br/>-new electric cabinet<br/>-new motor for the workpiecespindlehead<br/>-2-axis dro<br/>-paper filtration<br/><br/><br/>fotos of a delivered (1000u) machine with following optiones against extra <br/>charge:<br/><br/>-protection doors<br/>-tailstock version advance. in this case with micro-adjusting<br/>-handwheel of the version advance<br/><br/>more options on request:<br/><br/>-dro for swivel angle of workpiecespindlehead<br/>-dro for swivel angle of grinding wheel head<br/>-internal spindle holder with bore up to 100mm<br/>-max center height of 225mm<br/><br/>more kellenberger machines:<br/><br/>www.bumtg.com<br/><br/><br/>die werkzeugmaschine entspricht zum derzeitigen zeitpunkt nicht den grundlegenden sicherheits- und schutzanforderungen wie in der betrsichv 2015 genannt.<br/>eine anhebung des erforderlichen mindest-schutzzieles ist mittels einer gefährdungsbeurteilung nach betrsichv zu ermitteln.<br/><br/><br/><br/> GRINDING DIAMETER: 250,350,450 MM
GRINDING LENGTH: 1500 MM
CENTRE HEIGHT: 125,175,225 MM
GRINDING WHEEL DIAMETER: 400 MM
GRINDING WHEEL WIDTH: 50 MM
BORE: 127 MM
: MK5
WORK PIECE SPINDLE SPEED: 20-400 U/MIN
WORKPIECE SPINDLE - BORE: MM
GRINDING HEAD SWIVELLING: 360 °
GRINDING SPINDLE HEAD - SWIVABLE: 180 + - °
GRINDING SPINDLE SPEED: 1500,1700,2200 U/MIN
: 0,001-0,030 MM/Ø
: 0-0,95 MM/Ø
: ± 6 °
LONGITUDINAL FEED OF THE TABLE: 1750 MM
TABLE SPEEDS: 0,02-6 M/MIN
: 130 KG
: 130 INKL. SPANNUGKG KG
: MM
GRINDING DEPTH: MM
: 80 MM
TOTAL POWER REQUIREMENT: 6,5 KW
WEIGHT OF THE MACHINE CA.: 2,9 T
DIMENSIONS OF THE MACHINE CA.: 5,6 X 2,0 M
OVERHAULED WITH GEOMETRIC KELLENBERGER PROTOCOLL.

STANDARD WITH:

-NEW ELECTRIC CABINET
-NEW MOTOR FOR THE WORKPIECESPINDLEHEAD
-2-AXIS DRO
-PAPER FILTRATION


FOTOS OF A DELIVERED (1000U) MACHINE WITH FOLLOWING OPTIONES AGAINST EXTRA
CHARGE:

-PROTECTION DOORS
-TAILSTOCK VERSION ADVANCE. IN THIS CASE WITH MICRO-ADJUSTING
-HANDWHEEL OF THE VERSION ADVANCE

MORE OPTIONS ON REQUEST:

-DRO FOR SWIVEL ANGLE OF WORKPIECESPINDLEHEAD
-DRO FOR SWIVEL ANGLE OF GRINDING WHEEL HEAD
-INTERNAL SPINDLE HOLDER WITH BORE UP TO 100MM
-MAX CENTER HEIGHT OF 225MM

MORE KELLENBERGER MACHINES:

WWW.BUMTG.COM


DIE WERKZEUGMASCHINE ENTSPRICHT ZUM DERZEITIGEN ZEITPUNKT NICHT DEN GRUNDLEGENDEN SICHERHEITS- UND SCHUTZANFORDERUNGEN WIE IN DER BETRSICHV 2015 GENANNT.
EINE ANHEBUNG DES ERFORDERLICHEN MINDEST-SCHUTZZIELES IST MITTELS EINER GEFäHRDUNGSBEURTEILUNG NACH BETRSICHV ZU ERMITTELN.



Vendedor: BEMA
Año de construcción: usado
Ubicación: Land-5 linear axes 
2 linear axes 
2 axles c
bar loader iemca miniboss 325
year 2001
work oil
cnc fanuc
fixed rear machining 
passage headstock bar 20 mm 5 LINEAR AXES 2 LINEAR AXES 2 AXLES C BAR LOADER IEMCA MINIBOSS 325 YEAR 2001 WORK OIL CNC FANUC FIXED REAR MACHINING PASSAGE HEADSTOCK BAR 20 MM
Vendedor: Industrialbay
Año de construcción: usado
Precio: used machinery auction RESALE 70 €
Ubicación: Land-weight approx.: 160 kg<br/>dimensions (l x w x h) approx.: 1350 x 700 x 860 mm<br/>description: contents: soldering irons, screwdrivers, twist drills, hammers, socket inserts, steel shell die stock, the vice at the left top side of the photo is not included in the scope of delivery! WEIGHT APPROX.: 160 KG
DIMENSIONS (L X W X H) APPROX.: 1350 X 700 X 860 MM
DESCRIPTION: CONTENTS: SOLDERING IRONS, SCREWDRIVERS, TWIST DRILLS, HAMMERS, SOCKET INSERTS, STEEL SHELL DIE STOCK, THE VICE AT THE LEFT TOP SIDE OF THE PHOTO IS NOT INCLUDED IN THE SCOPE OF DELIVERY!
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-1 cnc lathe ctx 420 linear
circular diameter of 680 mm
swing over plan 565 mm
plan route x 260 mm
longitudinal stroke z 635 mm
bar passage 65 mm
10 spindle speed 5000 rpm
incl chuck
control siemens 840 d with reading-turn
c-axis
12 x discs revolver sauter with driven tools vdi 40
hollow clamping device of part of
spaennefoerderer
automatic tailstock
 1 CNC LATHE CTX 420 LINEAR CIRCULAR DIAMETER OF 680 MM SWING OVER PLAN 565 MM PLAN ROUTE X 260 MM LONGITUDINAL STROKE Z 635 MM BAR PASSAGE 65 MM 10 SPINDLE SPEED 5000 RPM INCL CHUCK CONTROL SIEMENS 840 D WITH READING-TURN C-AXIS 12 X DISCS REVOLVER SAUTER WITH DRIVEN TOOLS VDI 40 HOLLOW CLAMPING DEVICE OF PART OF SPAENNEFOERDERER AUTOMATIC TAILSTOCK
Vendedor: Luhan Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-turning diameter: 600 mm<br/>turning length: 1200 mm<br/>turning diameter over slide: 410 mm<br/>control: fanuc 210 is <br/>power capacity: 24/18 kw<br/>turning speeds: 3000 u/min<br/>rapid traverse: 15 m/min<br/>number of tapers in turret head: 8 <br/>spindle bore: 75 mm<br/>range l-w-h: 4,5 x 2,4 x 1,9 mm<br/>weight of the machine ca.: 5,5 t<br/>cnc lathe in good condition<br/><br/>- tailstock with mk 5<br/>- 3 jaw schuk schunk 315- 91<br/>- chipconveyor<br/><br/><br/><br/><br/> TURNING DIAMETER: 600 MM
TURNING LENGTH: 1200 MM
TURNING DIAMETER OVER SLIDE: 410 MM
CONTROL: FANUC 210 IS
POWER CAPACITY: 24/18 KW
TURNING SPEEDS: 3000 U/MIN
RAPID TRAVERSE: 15 M/MIN
NUMBER OF TAPERS IN TURRET HEAD: 8
SPINDLE BORE: 75 MM
RANGE L-W-H: 4,5 X 2,4 X 1,9 MM
WEIGHT OF THE MACHINE CA.: 5,5 T
CNC LATHE IN GOOD CONDITION

- TAILSTOCK WITH MK 5
- 3 JAW SCHUK SCHUNK 315- 91
- CHIPCONVEYOR




Vendedor: Klaus Rosenboom GmbH
Año de construcción: usado
Ubicación: Land-cnc lathe gildemeister ctx 210

with control siemens 840 d shop turn
year of build: 2007 swing over bed rail cover 380 mm
travel in x 160 mm
travel in z: 305 mm
spindle bore: 56 mm
speed range: 20-6000 rpm with the following accessories:

sliding screen design with interior lighting
12 station turret with 6 driven tool stations
pickup device
bar feeder irco breuning ils - rbk 10012
indicator light 3 times
tailstock with quill
chip conveyor with tank
collet chuck hainbuch with foot switch
coolant system
operating instructions CNC LATHE GILDEMEISTER CTX 210 WITH CONTROL SIEMENS 840 D SHOP TURN YEAR OF BUILD: 2007 SWING OVER BED RAIL COVER 380 MM TRAVEL IN X 160 MM TRAVEL IN Z: 305 MM SPINDLE BORE: 56 MM SPEED RANGE: 20-6000 RPM WITH THE FOLLOWING ACCESSORIES: SLIDING SCREEN DESIGN WITH INTERIOR LIGHTING 12 STATION TURRET WITH 6 DRIVEN TOOL STATIONS PICKUP DEVICE BAR FEEDER IRCO BREUNING ILS - RBK 10012 INDICATOR LIGHT 3 TIMES TAILSTOCK WITH QUILL CHIP CONVEYOR WITH TANK COLLET CHUCK HAINBUCH WITH FOOT SWITCH COOLANT SYSTEM OPERATING INSTRUCTIONS
Vendedor: Martin Beschle Werkzeuge & Maschinen GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 400 mm<br/>turning length: 650 mm<br/>turning diameter over bed slide: 270 <br/>control: siemens 840 d powerline <br/>spindle bore: 65 mm<br/>speeds: 4000 u/min<br/>number of tapers in turret head: 8 <br/>drive capacity - workpiece: 15/12 kw<br/>max. torque on the spindle: 400/320 <br/>range l-w-h: 2,2 x 1,6 x 1,9 mm<br/>weight of the machine ca.: 2,9 t<br/>used small cnc lathe with big spindle bore<br/><br/>- tailstock mk 4<br/>- dialog programming  siemens shop turn<br/>- some tool holders and jaws<br/>- ship box<br/>- 3 jaw chuck schunk rota tp 250-68<br/><br/><br/><br/><br/> TURNING DIAMETER: 400 MM
TURNING LENGTH: 650 MM
TURNING DIAMETER OVER BED SLIDE: 270
CONTROL: SIEMENS 840 D POWERLINE
SPINDLE BORE: 65 MM
SPEEDS: 4000 U/MIN
NUMBER OF TAPERS IN TURRET HEAD: 8
DRIVE CAPACITY - WORKPIECE: 15/12 KW
MAX. TORQUE ON THE SPINDLE: 400/320
RANGE L-W-H: 2,2 X 1,6 X 1,9 MM
WEIGHT OF THE MACHINE CA.: 2,9 T
USED SMALL CNC LATHE WITH BIG SPINDLE BORE

- TAILSTOCK MK 4
- DIALOG PROGRAMMING SIEMENS SHOP TURN
- SOME TOOL HOLDERS AND JAWS
- SHIP BOX
- 3 JAW CHUCK SCHUNK ROTA TP 250-68




Vendedor: Klaus Rosenboom GmbH
Año de construcción: usado
Ubicación: Land-high speed aplications for saddle-sitched book with trimmer
bar code tracking 2,440 pages/min (up to 12.000 books/hour)
max. size 464 x 320 mm
min size  250 x 200 mm
max book size 320 x 225 mm
2 stiching heads
stock weight from 50 gsm to 160 gsm
graphical touch screen
in line connection for any digital printers or off line
suitable for any digital machine
brand new set of spare knifes
implant machine (very little use)
like new!!! HIGH SPEED APLICATIONS FOR SADDLE-SITCHED BOOK WITH TRIMMER BAR CODE TRACKING 2,440 PAGES/MIN (UP TO 12.000 BOOKS/HOUR) MAX. SIZE 464 X 320 MM MIN SIZE 250 X 200 MM MAX BOOK SIZE 320 X 225 MM 2 STICHING HEADS STOCK WEIGHT FROM 50 GSM TO 160 GSM GRAPHICAL TOUCH SCREEN IN LINE CONNECTION FOR ANY DIGITAL PRINTERS OR OFF LINE SUITABLE FOR ANY DIGITAL MACHINE BRAND NEW SET OF SPARE KNIFES IMPLANT MACHINE (VERY LITTLE USE) LIKE NEW!!!
Vendedor: ICD
Año de construcción: usado
Ubicación: Land-turning diameter: 410 mm<br/>turning length: 960 mm<br/>turning diameter over slide: 380 mm<br/>greates pass round over bed: 700 mm<br/>control: heidenhain  turnplus <br/>spindle passage: 95 mm<br/>spindle speed:: 4000 u/min<br/>spindle motor: 35/45 kw<br/>max. torque on the spindle: 770 nm<br/>no. of tools in turret 1: 12 vdi 40<br/>driven stations: 12 vdi 40<br/>speed of driven tools: 4000 u/min<br/>drive milling spindle: 5,6/ 11,3 kw<br/>y-axis: +/- 60 mm<br/>rapid traverse: 30/22,5/30 m/min<br/>tail stock: mk 5 <br/>range l-w-h: 5700 x 2100 x 2000 mm<br/>weight of the machine ca.: 6,5 t<br/>cnc lathe with driven tools and y- axis<br/><br/>- collet chuck hainbuch komi axfix gr. 100<br/>- chipconveyor<br/>- 1x driven tool holder<br/>- some tooling<br/>- oil mist collector<br/><br/><br/><br/><br/> TURNING DIAMETER: 410 MM
TURNING LENGTH: 960 MM
TURNING DIAMETER OVER SLIDE: 380 MM
GREATES PASS ROUND OVER BED: 700 MM
CONTROL: HEIDENHAIN TURNPLUS
SPINDLE PASSAGE: 95 MM
SPINDLE SPEED:: 4000 U/MIN
SPINDLE MOTOR: 35/45 KW
MAX. TORQUE ON THE SPINDLE: 770 NM
NO. OF TOOLS IN TURRET 1: 12 VDI 40
DRIVEN STATIONS: 12 VDI 40
SPEED OF DRIVEN TOOLS: 4000 U/MIN
DRIVE MILLING SPINDLE: 5,6/ 11,3 KW
Y-AXIS: +/- 60 MM
RAPID TRAVERSE: 30/22,5/30 M/MIN
TAIL STOCK: MK 5
RANGE L-W-H: 5700 X 2100 X 2000 MM
WEIGHT OF THE MACHINE CA.: 6,5 T
CNC LATHE WITH DRIVEN TOOLS AND Y- AXIS

- COLLET CHUCK HAINBUCH KOMI AXFIX GR. 100
- CHIPCONVEYOR
- 1X DRIVEN TOOL HOLDER
- SOME TOOLING
- OIL MIST COLLECTOR




Vendedor: Klaus Rosenboom GmbH
Año de construcción: usado
Ubicación: Land-cnc lathe spu20cnc
manufacturer kovosvit, sezimovo ã?stã­
1995 go 2004
control systems sinumeric 810 t (the system was already on the machine, the machine was intended for export), the machine constants are backed up on cd
siemens indramat drives
facilities:
tool head with 12 positions duplomatic
chip conveyor
tailstock (live approximately 40%, not used)
aerosol extractor from the filter crap workspace
chuck 250 mmcnc lathe spu20cnc
manufacturer kovosvit, sezimovo ã?stã­
1995 go 2004
control systems sinumeric 810 t (the system was already on the machine, the machine was intended for export), the machine constants are backed up on cd
siemens indramat drives
facilities:
tool head with 12 positions duplomatic
chip conveyor
tailstock (live approximately 40%, not used)
aerosol extractor from the filter crap workspace
chuck 250 mm CNC LATHE SPU20CNC MANUFACTURER KOVOSVIT, SEZIMOVO &ATILDE;?ST&ATILDE;&SHY; 1995 GO 2004 CONTROL SYSTEMS SINUMERIC 810 T (THE SYSTEM WAS ALREADY ON THE MACHINE, THE MACHINE WAS INTENDED FOR EXPORT), THE MACHINE CONSTANTS ARE BACKED UP ON CD SIEMENS INDRAMAT DRIVES FACILITIES: TOOL HEAD WITH 12 POSITIONS DUPLOMATIC CHIP CONVEYOR TAILSTOCK (LIVE APPROXIMATELY 40%, NOT USED) AEROSOL EXTRACTOR FROM THE FILTER CRAP WORKSPACE CHUCK 250 MMCNC LATHE SPU20CNC MANUFACTURER KOVOSVIT, SEZIMOVO &ATILDE;?ST&ATILDE;&SHY; 1995 GO 2004 CONTROL SYSTEMS SINUMERIC 810 T (THE SYSTEM WAS ALREADY ON THE MACHINE, THE MACHINE WAS INTENDED FOR EXPORT), THE MACHINE CONSTANTS ARE BACKED UP ON CD SIEMENS INDRAMAT DRIVES FACILITIES: TOOL HEAD WITH 12 POSITIONS DUPLOMATIC CHIP CONVEYOR TAILSTOCK (LIVE APPROXIMATELY 40%, NOT USED) AEROSOL EXTRACTOR FROM THE FILTER CRAP WORKSPACE CHUCK 250 MM
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Ubicación: Land-turning diameter: 530 mm<br/>turning length: 1000 mm<br/>swing dia.: 550 mm<br/>spindle hollow: 65 mm<br/>spindle bore: 22/15 kw<br/>power capacity: 38 - 3800 u/min<br/>control: osp u 100 l <br/>turning speed range: 30/40/26 m/min<br/>number of tapers in turret head: 7,5 kw<br/>power capacity - milling spindle: 15 - 6000 u/min<br/>turning speed range - milling: hsk 63 a <br/>tool taper: 44 stück<br/>numbers of tools in magazin: +80/-80 mm<br/>tail stock: gegenspindel/ sub spindle <br/>speeds spindle 2: 6000 u/min<br/>b-axis: 210 °<br/>weight of the machine ca.: 12,5 t<br/>dimensions: 7,3 x 2,8 x 2,73 m<br/>7- axis turning/ milling centre with milling head, sub spindle and barfeed <br/>magazin<br/><br/>- milling head with b- axis<br/>- big bore main spindle<br/>- sub spindle<br/>- b-axis 1°<br/>- chip conveyor<br/>- touch setter<br/>- igf one touch dialog programming<br/>- 3- jaw chuck Ø 250 mm main spindle<br/>- 3 jaw chuck Ø 150 mm sub spindel<br/>- oil cooler<br/>- rotoclean<br/>- short barfeed magazin<br/>- parts catcher<br/>- hand wheel<br/><br/>first instalation 2004<br/><br/><br/><br/><br/> TURNING DIAMETER: 530 MM
TURNING LENGTH: 1000 MM
SWING DIA.: 550 MM
SPINDLE HOLLOW: 65 MM
SPINDLE BORE: 22/15 KW
POWER CAPACITY: 38 - 3800 U/MIN
CONTROL: OSP U 100 L
TURNING SPEED RANGE: 30/40/26 M/MIN
NUMBER OF TAPERS IN TURRET HEAD: 7,5 KW
POWER CAPACITY - MILLING SPINDLE: 15 - 6000 U/MIN
TURNING SPEED RANGE - MILLING: HSK 63 A
TOOL TAPER: 44 STüCK
NUMBERS OF TOOLS IN MAGAZIN: +80/-80 MM
TAIL STOCK: GEGENSPINDEL/ SUB SPINDLE
SPEEDS SPINDLE 2: 6000 U/MIN
B-AXIS: 210 °
WEIGHT OF THE MACHINE CA.: 12,5 T
DIMENSIONS: 7,3 X 2,8 X 2,73 M
7- AXIS TURNING/ MILLING CENTRE WITH MILLING HEAD, SUB SPINDLE AND BARFEED
MAGAZIN

- MILLING HEAD WITH B- AXIS
- BIG BORE MAIN SPINDLE
- SUB SPINDLE
- B-AXIS 1°
- CHIP CONVEYOR
- TOUCH SETTER
- IGF ONE TOUCH DIALOG PROGRAMMING
- 3- JAW CHUCK Ø 250 MM MAIN SPINDLE
- 3 JAW CHUCK Ø 150 MM SUB SPINDEL
- OIL COOLER
- ROTOCLEAN
- SHORT BARFEED MAGAZIN
- PARTS CATCHER
- HAND WHEEL

FIRST INSTALATION 2004




Vendedor: Klaus Rosenboom GmbH
Año de construcción: usado
Ubicación: Land-cnc lathe: nl 3000 mc / 700
year of manufacture 2007.
control unit: msx-850bm-iii
chuck 12 "(300mm)"
maximum turning diameter 420 mm (500 mm)
turning length 700 mm
increased performance 25/30 kw, speed 3,000 rpm
c-axis
driven tools 3.7 / 5,5 kw, speed 6,000 rpm
programmable tailstock
mapps ii software
automatic switch-off system CNC LATHE: NL 3000 MC / 700 YEAR OF MANUFACTURE 2007. CONTROL UNIT: MSX-850BM-III CHUCK 12 "(300MM)" MAXIMUM TURNING DIAMETER 420 MM (500 MM) TURNING LENGTH 700 MM INCREASED PERFORMANCE 25/30 KW, SPEED 3,000 RPM C-AXIS DRIVEN TOOLS 3.7 / 5,5 KW, SPEED 6,000 RPM PROGRAMMABLE TAILSTOCK MAPPS II SOFTWARE AUTOMATIC SWITCH-OFF SYSTEM
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Ubicación: Land-turning diameter: 700 mm<br/>turning length: 2000 mm<br/>turning diameter over slide: 387 mm<br/>control: fanuc 18- tb <br/>spindle passage: 115 mm<br/>spindle nose: a 2-11 <br/>number of spindle speeds: 1800 u/min<br/>spindle motor: 30/37 kw<br/>max. torque on the spindle: 3070 nm<br/>number of tools: 12 bmt<br/>driven stations: 6 bmt<br/>speed of driven tools: 3000 u/min<br/>drive milling spindle: 3,7/ 5,5 kw<br/>rapid traverse: 24 m/min<br/>tail stock: mk 5, Ø 150 mm<br/>range l-w-h: 6.00 x 2.270 x 2.540 mm<br/>weight of the machine ca.: 16 t<br/>cnc- lathe with driven tools and steady<br/><br/>- tool measuring                            - chip conveyor<br/>- hydr. steady smw slu 4 (Ø 50- 260 mm)     - 6 bar coolant<br/>- 3- jaw chuck kitagawa b 15                - 1 + 1 driven tool<br/>- some std. tooling                         - box way all axis<br/><br/><br/><br/><br/> TURNING DIAMETER: 700 MM
TURNING LENGTH: 2000 MM
TURNING DIAMETER OVER SLIDE: 387 MM
CONTROL: FANUC 18- TB
SPINDLE PASSAGE: 115 MM
SPINDLE NOSE: A 2-11
NUMBER OF SPINDLE SPEEDS: 1800 U/MIN
SPINDLE MOTOR: 30/37 KW
MAX. TORQUE ON THE SPINDLE: 3070 NM
NUMBER OF TOOLS: 12 BMT
DRIVEN STATIONS: 6 BMT
SPEED OF DRIVEN TOOLS: 3000 U/MIN
DRIVE MILLING SPINDLE: 3,7/ 5,5 KW
RAPID TRAVERSE: 24 M/MIN
TAIL STOCK: MK 5, Ø 150 MM
RANGE L-W-H: 6.00 X 2.270 X 2.540 MM
WEIGHT OF THE MACHINE CA.: 16 T
CNC- LATHE WITH DRIVEN TOOLS AND STEADY

- TOOL MEASURING - CHIP CONVEYOR
- HYDR. STEADY SMW SLU 4 (Ø 50- 260 MM) - 6 BAR COOLANT
- 3- JAW CHUCK KITAGAWA B 15 - 1 + 1 DRIVEN TOOL
- SOME STD. TOOLING - BOX WAY ALL AXIS




Vendedor: Klaus Rosenboom GmbH
Año de construcción: usado
Ubicación: Land-warehouse/stock #1227 conveyor belt, manufacturer: mtf technique,.
type: bfls no. 2486
year built: 1996, 400v,50 hz.

length: 1.54 m,
outside width: 0.48 m
inside width: 0.38 m

used, fully functional.
WAREHOUSE/STOCK #1227 CONVEYOR BELT, MANUFACTURER: MTF TECHNIQUE,. TYPE: BFLS NO. 2486 YEAR BUILT: 1996, 400V,50 HZ. LENGTH: 1.54 M, OUTSIDE WIDTH: 0.48 M INSIDE WIDTH: 0.38 M USED, FULLY FUNCTIONAL.
Vendedor: Pro-tech Kunststofftechnologie GmbH
Año de construcción: usado
Ubicación: Land-thickness of jaw: 200 mm<br/>weight of the machine ca.: 100 kg<br/>dimensions of the machine ca.: 700 x 230 x 170 mm cm<br/><br/><br/><br/><br/> THICKNESS OF JAW: 200 MM
WEIGHT OF THE MACHINE CA.: 100 KG
DIMENSIONS OF THE MACHINE CA.: 700 X 230 X 170 MM CM




Vendedor: Klaus Rosenboom GmbH
Año de construcción: usado
Ubicación: Land-control system: maho 432 t	
travel distances:	
x: 250 mm	
z : 620 mm	
speed range: 20-5000 rpm	
toolholder: vdi 30	
turret 12 positions (positions for live tools)	
accessories:	
bar loader hydrobar	
tool probe	
tailstock	
chip conveyor	
manuals	
 CONTROL SYSTEM: MAHO 432 T TRAVEL DISTANCES: X: 250 MM Z : 620 MM SPEED RANGE: 20-5000 RPM TOOLHOLDER: VDI 30 TURRET 12 POSITIONS (POSITIONS FOR LIVE TOOLS) ACCESSORIES: BAR LOADER HYDROBAR TOOL PROBE TAILSTOCK CHIP CONVEYOR MANUALS
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-grinding length:   1200 mm<br/>grinding width:    750 mm<br/>workpiece height:    600 mm<br/>--------------------------------------------------:  <br/>working range surface grinding:  <br/>- grinding length:   1200 mm<br/>- grinding width:    750 mm<br/>- workpiece height (max) with largest wheel:    600 mm<br/>magnetic table:  <br/>- length:   1200 mm<br/>- width:    600 mm<br/>spindlestock grinding spindle:  <br/>- spindle revolutions (max):   1440 /min<br/>- drive power:    7.5 kw<br/>grinding tool:  <br/>- type of grinding tool: wheel:        <br/>- diameter (max):    400 mm<br/>- borehole: diameter:    127 mm<br/>- width:    100 mm<br/>dimensions / weights:  <br/>- total weight approx.:   6500 kg<br/>last overhaul: 2017<br/><br/><br/><br/><br/> GRINDING LENGTH: 1200 MM
GRINDING WIDTH: 750 MM
WORKPIECE HEIGHT: 600 MM
--------------------------------------------------:
WORKING RANGE SURFACE GRINDING:
- GRINDING LENGTH: 1200 MM
- GRINDING WIDTH: 750 MM
- WORKPIECE HEIGHT (MAX) WITH LARGEST WHEEL: 600 MM
MAGNETIC TABLE:
- LENGTH: 1200 MM
- WIDTH: 600 MM
SPINDLESTOCK GRINDING SPINDLE:
- SPINDLE REVOLUTIONS (MAX): 1440 /MIN
- DRIVE POWER: 7.5 KW
GRINDING TOOL:
- TYPE OF GRINDING TOOL: WHEEL:
- DIAMETER (MAX): 400 MM
- BOREHOLE: DIAMETER: 127 MM
- WIDTH: 100 MM
DIMENSIONS / WEIGHTS:
- TOTAL WEIGHT APPROX.: 6500 KG
LAST OVERHAUL: 2017




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-p94 - used approx. 6.6 m³ / 6,600 litres polypropylene tank, pp-tank, standing upright, roofless, open storage tank with flat bottom, in good condition. 

technical details: 
capacity: approx. 6.6 m³ / 6,600 litres 
material: pp-tank, polypropylene tank 
dimensions: Ø approx. 1.90 m   x   height = approx. 2.50 m 

used storage container in good condition. vertically standing tank with a flat bottom, 2 large flanges, as pictured without a roof and open top. the flanges can be changed or shut upon request. 

this container can be used as a storage tank for liquid feed, water, whey and many different media. 

price upon request. 

transport can be arranged at low cost. also we can modify the tank to suit your demands, just ask us. 

it is not possible to update all our advertisements daily. since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. please give us a call or write, so that we can advise you personally. 

more information and offers on our site: 
profi-tanks(dot)de P94 - USED APPROX. 6.6 M³ / 6,600 LITRES POLYPROPYLENE TANK, PP-TANK, STANDING UPRIGHT, ROOFLESS, OPEN STORAGE TANK WITH FLAT BOTTOM, IN GOOD CONDITION. TECHNICAL DETAILS: CAPACITY: APPROX. 6.6 M³ / 6,600 LITRES MATERIAL: PP-TANK, POLYPROPYLENE TANK DIMENSIONS: Ø APPROX. 1.90 M X HEIGHT = APPROX. 2.50 M USED STORAGE CONTAINER IN GOOD CONDITION. VERTICALLY STANDING TANK WITH A FLAT BOTTOM, 2 LARGE FLANGES, AS PICTURED WITHOUT A ROOF AND OPEN TOP. THE FLANGES CAN BE CHANGED OR SHUT UPON REQUEST. THIS CONTAINER CAN BE USED AS A STORAGE TANK FOR LIQUID FEED, WATER, WHEY AND MANY DIFFERENT MEDIA. PRICE UPON REQUEST. TRANSPORT CAN BE ARRANGED AT LOW COST. ALSO WE CAN MODIFY THE TANK TO SUIT YOUR DEMANDS, JUST ASK US. IT IS NOT POSSIBLE TO UPDATE ALL OUR ADVERTISEMENTS DAILY. SINCE OUR INVENTORY IS CHANGING CONTINUOUSLY, IT MAY BE THAT THIS TANK HAS ALREADY BEEN SOLD BUT A SIMILAR ONE IS IN STOCK. PLEASE GIVE US A CALL OR WRITE, SO THAT WE CAN ADVISE YOU PERSONALLY. MORE INFORMATION AND OFFERS ON OUR SITE: PROFI-TANKS(DOT)DE
Vendedor: Profihandels GmbH
Año de construcción: usado
Ubicación: Land-grinding length:    400 mm<br/>grinding width:    163 mm<br/>workpiece height:        mm<br/>--------------------------------------------------:  <br/>working range surface grinding:  <br/>- grinding length:    400 mm<br/>- grinding width:    163 mm<br/>- vertical travel:    200 mm<br/>table (surface grinding):  <br/>- magnetic table: yes:        <br/>magnetic table:  <br/>- length:    350 mm<br/>- width:    150 mm<br/>- height:     50 mm<br/>spindlestock grinding spindle:  <br/>- x-axis travel:    483 mm<br/>- y-axis travel:    171 mm<br/>- z-axis travel:    279 mm<br/>- spindle revolutions (max):   2800 /min<br/>grinding tool:  <br/>- type of grinding tool: wheel:        <br/>- diameter (max):    178 mm<br/>- borehole: diameter:     32 mm<br/>- width:     13 mm<br/>electrical specifications:  <br/>- total power consumption:    1.5 kw<br/>- mains voltage:    380 v<br/>- mains frequency:     50 hz<br/>dimensions / weights:  <br/>- space requirements -left/right-:   1650 mm<br/>- space requirements -front/back-:    825 mm<br/>- total weight approx.:    800 kg<br/>last overhaul: 2018<br/>electrical and mechanical reconstruction of the machine<br/>delivery time: 4-5 months from order confirmation<br/><br/><br/><br/><br/> GRINDING LENGTH: 400 MM
GRINDING WIDTH: 163 MM
WORKPIECE HEIGHT: MM
--------------------------------------------------:
WORKING RANGE SURFACE GRINDING:
- GRINDING LENGTH: 400 MM
- GRINDING WIDTH: 163 MM
- VERTICAL TRAVEL: 200 MM
TABLE (SURFACE GRINDING):
- MAGNETIC TABLE: YES:
MAGNETIC TABLE:
- LENGTH: 350 MM
- WIDTH: 150 MM
- HEIGHT: 50 MM
SPINDLESTOCK GRINDING SPINDLE:
- X-AXIS TRAVEL: 483 MM
- Y-AXIS TRAVEL: 171 MM
- Z-AXIS TRAVEL: 279 MM
- SPINDLE REVOLUTIONS (MAX): 2800 /MIN
GRINDING TOOL:
- TYPE OF GRINDING TOOL: WHEEL:
- DIAMETER (MAX): 178 MM
- BOREHOLE: DIAMETER: 32 MM
- WIDTH: 13 MM
ELECTRICAL SPECIFICATIONS:
- TOTAL POWER CONSUMPTION: 1.5 KW
- MAINS VOLTAGE: 380 V
- MAINS FREQUENCY: 50 HZ
DIMENSIONS / WEIGHTS:
- SPACE REQUIREMENTS -LEFT/RIGHT-: 1650 MM
- SPACE REQUIREMENTS -FRONT/BACK-: 825 MM
- TOTAL WEIGHT APPROX.: 800 KG
LAST OVERHAUL: 2018
ELECTRICAL AND MECHANICAL RECONSTRUCTION OF THE MACHINE
DELIVERY TIME: 4-5 MONTHS FROM ORDER CONFIRMATION




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-<b>properties</b>

used belt conveyor of manufacturer trans standard
incl. motor
ideal for fast material handling
expertly disassembled and packed
condition: fully operational
6 stk. in stock

<b>belt conveyors</b>

the belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and woodworking machines. also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances.

<b>technical data:</b>

mass of the belt conveyor
overall length: 1,000 mm
total width: 1,030 mm
total width me engine: 1, 300 mm
height: 140mm

<b>information on the belt</b>
belt width: 900 mm
strap type: smooth aluminium frame <B>PROPERTIES</B> USED BELT CONVEYOR OF MANUFACTURER TRANS STANDARD INCL. MOTOR IDEAL FOR FAST MATERIAL HANDLING EXPERTLY DISASSEMBLED AND PACKED CONDITION: FULLY OPERATIONAL 6 STK. IN STOCK <B>BELT CONVEYORS</B> THE BELT IS IDEAL TO DOVETAIL MACHINES OR JOBS IN THE PICKING ZONE AND TO OPTIMIZE THE INTERNAL PROCESS. TRANSPORTATION CAN FOSTER THE BELT CONVEYOR SENSITIVE AND DIFFERENT-SIZED CONTAINERS, BOXES OR OTHER PACKAGING AND ARTICLE UNITS TO THE TASK OR DELIVERY POINT AND, FOR EXAMPLE, ALSO SERVES AS A CONNECTING ROUTE BEFORE OR BETWEEN PRODUCTION AND WOODWORKING MACHINES. ALSO ENABLES EFFICIENT PARTS IN OPERATING AND STORAGE AND IS DESIGNED TO PROMOTE SIGNIFICANT FLOW RATES AND DISTANCES. <B>TECHNICAL DATA:</B> MASS OF THE BELT CONVEYOR OVERALL LENGTH: 1,000 MM TOTAL WIDTH: 1,030 MM TOTAL WIDTH ME ENGINE: 1, 300 MM HEIGHT: 140MM <B>INFORMATION ON THE BELT</B> BELT WIDTH: 900 MM STRAP TYPE: SMOOTH ALUMINIUM FRAME
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Ubicación: Land-turning diameter: max. 260 mm<br/>turning length: 450 mm<br/>control: sinumerik siemens<br/>greates pass round over bed: 330 mm<br/>standard turning dia.: 200 mm<br/>main spindle::  <br/>max. rpm: 5.000 min/-1<br/>power capacity - main spindel: 11 / 16,5 kw<br/>max. torque: 166,5 nm<br/>spindle diameter in front bearing: 100 mm<br/>spindle bore: 68,5 mm<br/>max. bar capacity: 65 mm<br/>usable bar diameter: ( - ) mm<br/>max. chucking diameter: 210 mm<br/>spindle taper: 140h5 <br/>c-axis: 0,001 °<br/>axis stroke::  <br/>x-axis: 182,5 mm<br/>z-axis: 455 mm<br/>c-axis: 360 °<br/>turret::  <br/>number of toolpositions: 12 pos.<br/>number of driven toolspositions: 12 pos.<br/>tool taper: vdi 30 <br/>spindle speed - driven tool stations: max. 4.500 min -1<br/>power capacity - driven tool-stations: 8,4 kw<br/>max. torque: 20 nm<br/>tailstock::  <br/>tailstock adjustment: 396 mm<br/>tension force: 4 kn<br/>capture: mk 4 <br/>total power requirement: 21 kw<br/>weight of the machine ca.: 3,4 t<br/>dimensions of the machine ca.: 6,5 x 3,0 x 2,1 m<br/>documents:  <br/>chip conveyor:  <br/>coolantsystem:  <br/>c-axis:  <br/>turret:  <br/>cnc-turning- and millingcenter<br/>dmg mori - ecoturn 310 v3<br/><br/>- only ca. 600h operating-hours<br/><br/><br/><br/><br/> TURNING DIAMETER: MAX. 260 MM
TURNING LENGTH: 450 MM
CONTROL: SINUMERIK SIEMENS
GREATES PASS ROUND OVER BED: 330 MM
STANDARD TURNING DIA.: 200 MM
MAIN SPINDLE::
MAX. RPM: 5.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 11 / 16,5 KW
MAX. TORQUE: 166,5 NM
SPINDLE DIAMETER IN FRONT BEARING: 100 MM
SPINDLE BORE: 68,5 MM
MAX. BAR CAPACITY: 65 MM
USABLE BAR DIAMETER: ( - ) MM
MAX. CHUCKING DIAMETER: 210 MM
SPINDLE TAPER: 140H5
C-AXIS: 0,001 °
AXIS STROKE::
X-AXIS: 182,5 MM
Z-AXIS: 455 MM
C-AXIS: 360 °
TURRET::
NUMBER OF TOOLPOSITIONS: 12 POS.
NUMBER OF DRIVEN TOOLSPOSITIONS: 12 POS.
TOOL TAPER: VDI 30
SPINDLE SPEED - DRIVEN TOOL STATIONS: MAX. 4.500 MIN -1
POWER CAPACITY - DRIVEN TOOL-STATIONS: 8,4 KW
MAX. TORQUE: 20 NM
TAILSTOCK::
TAILSTOCK ADJUSTMENT: 396 MM
TENSION FORCE: 4 KN
CAPTURE: MK 4
TOTAL POWER REQUIREMENT: 21 KW
WEIGHT OF THE MACHINE CA.: 3,4 T
DIMENSIONS OF THE MACHINE CA.: 6,5 X 3,0 X 2,1 M
DOCUMENTS:
CHIP CONVEYOR:
COOLANTSYSTEM:
C-AXIS:
TURRET:
CNC-TURNING- AND MILLINGCENTER
DMG MORI - ECOTURN 310 V3

- ONLY CA. 600H OPERATING-HOURS




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-<b>properties</b>

used belt conveyor of manufacturer trans standard
incl. motor
ideal for fast material handling
expertly disassembled and packed
condition: fully operational
6 stk. in stock

<b>belt conveyors</b>

the belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and woodworking machines. also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances.

<b>technical data:</b>

mass of the belt conveyor
overall length: 1,420 mm
total width: 1,030 mm
total width me engine: 1, 300 mm
height: 140mm

<b>information on the belt</b>
belt width: 900 mm
strap type: smooth aluminium frame <B>PROPERTIES</B> USED BELT CONVEYOR OF MANUFACTURER TRANS STANDARD INCL. MOTOR IDEAL FOR FAST MATERIAL HANDLING EXPERTLY DISASSEMBLED AND PACKED CONDITION: FULLY OPERATIONAL 6 STK. IN STOCK <B>BELT CONVEYORS</B> THE BELT IS IDEAL TO DOVETAIL MACHINES OR JOBS IN THE PICKING ZONE AND TO OPTIMIZE THE INTERNAL PROCESS. TRANSPORTATION CAN FOSTER THE BELT CONVEYOR SENSITIVE AND DIFFERENT-SIZED CONTAINERS, BOXES OR OTHER PACKAGING AND ARTICLE UNITS TO THE TASK OR DELIVERY POINT AND, FOR EXAMPLE, ALSO SERVES AS A CONNECTING ROUTE BEFORE OR BETWEEN PRODUCTION AND WOODWORKING MACHINES. ALSO ENABLES EFFICIENT PARTS IN OPERATING AND STORAGE AND IS DESIGNED TO PROMOTE SIGNIFICANT FLOW RATES AND DISTANCES. <B>TECHNICAL DATA:</B> MASS OF THE BELT CONVEYOR OVERALL LENGTH: 1,420 MM TOTAL WIDTH: 1,030 MM TOTAL WIDTH ME ENGINE: 1, 300 MM HEIGHT: 140MM <B>INFORMATION ON THE BELT</B> BELT WIDTH: 900 MM STRAP TYPE: SMOOTH ALUMINIUM FRAME
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Precio: used machinery auction RESALE 39.000 €
Ubicación: Land-weight approx.: 2500 kg<br/>pressure: 20 to<br/>dimensions (l x w x h) approx.: 1550 x 1800 x 1965 mm<br/>description: <b>this is a demonstration machine in stock!</b><br> ergonomic press brake made of a rigid monoblock frame (mehaanite 700 n/mm²)<br> the machine has a direct drive via servo motor and ball screw which works on tension to avoid deformation.<br> in addition, the machine is equipped with a 6-axis backgauge, a teda quick tool clamp and an iris rapid bend safety device<br> <br> - serial number: fx85610002580<br> - bending capacity: 200 kn<br> - usable bending length: 850 mm<br> - y-axis travel stroke: 1956 mm<br> - y-axis speed: 200 mm/sec<br> - installation height(table to upper bending beam): 470 (395) mm<br> - x axis travel stroke (6 axes x1-x2-r1-r2-z1-z2): 375 mm<br> - r axis travel stroke (6 axes x1-x2-r1-r2-z1-z2: 180 mm<br> - z axis speed (6 axes x1-x2-r1-r2-z1-z2): 744 mm/sec<br> - x axis velocity (6 axes x1-x2-r1-r2-z1-z2): 1000 mm/sec<br> - r axis speed (6 axes x1-x2-r1-r2-z1-z2): 350 mm/sec<br> - z axis speed (6 axes x1-x2-r1-r2-z1-z2): 220 mm/sec<br> - wireless connection / wireless / usb-port: yes / 2<br> - main motor power: 1x5,2 kw<br> - connection power: 5 kwa<br> <br> <b>accessories:</b><br> - top promecam tool holder (without tools) with quick-release lever<br> - below tool holder for amada / promecam and wila plug-in matrices<br> - cnc control panasonic toughbook incl. battery, usb connection and wifi<br> - anti-reflective lcd touchscreen<br> - safety device dual laser<br> - rigid mehaanite monoblock cast iron body tensile strength 700n/mm²<br> - direct drive via servo motor and recirculating ball screw<br> - 2-axle backgauge moves<br> - ergonomic design<br> <br> <b>special accessories:</b><br> teda speed grip quick-change system top, for standard amada/promecam tools<br> 6 axes backgauge x1/x2/r1/r2/z1/z2<br> iris rapid bend, safety device, travels at rapid traverse to the mute point<br> <br> the machine can be transported by forkl WEIGHT APPROX.: 2500 KG
PRESSURE: 20 TO
DIMENSIONS (L X W X H) APPROX.: 1550 X 1800 X 1965 MM
DESCRIPTION: THIS IS A DEMONSTRATION MACHINE IN STOCK!
ERGONOMIC PRESS BRAKE MADE OF A RIGID MONOBLOCK FRAME (MEHAANITE 700 N/MM²)
THE MACHINE HAS A DIRECT DRIVE VIA SERVO MOTOR AND BALL SCREW WHICH WORKS ON TENSION TO AVOID DEFORMATION.
IN ADDITION, THE MACHINE IS EQUIPPED WITH A 6-AXIS BACKGAUGE, A TEDA QUICK TOOL CLAMP AND AN IRIS RAPID BEND SAFETY DEVICE

- SERIAL NUMBER: FX85610002580
- BENDING CAPACITY: 200 KN
- USABLE BENDING LENGTH: 850 MM
- Y-AXIS TRAVEL STROKE: 1956 MM
- Y-AXIS SPEED: 200 MM/SEC
- INSTALLATION HEIGHT(TABLE TO UPPER BENDING BEAM): 470 (395) MM
- X AXIS TRAVEL STROKE (6 AXES X1-X2-R1-R2-Z1-Z2): 375 MM
- R AXIS TRAVEL STROKE (6 AXES X1-X2-R1-R2-Z1-Z2: 180 MM
- Z AXIS SPEED (6 AXES X1-X2-R1-R2-Z1-Z2): 744 MM/SEC
- X AXIS VELOCITY (6 AXES X1-X2-R1-R2-Z1-Z2): 1000 MM/SEC
- R AXIS SPEED (6 AXES X1-X2-R1-R2-Z1-Z2): 350 MM/SEC
- Z AXIS SPEED (6 AXES X1-X2-R1-R2-Z1-Z2): 220 MM/SEC
- WIRELESS CONNECTION / WIRELESS / USB-PORT: YES / 2
- MAIN MOTOR POWER: 1X5,2 KW
- CONNECTION POWER: 5 KWA

ACCESSORIES:
- TOP PROMECAM TOOL HOLDER (WITHOUT TOOLS) WITH QUICK-RELEASE LEVER
- BELOW TOOL HOLDER FOR AMADA / PROMECAM AND WILA PLUG-IN MATRICES
- CNC CONTROL PANASONIC TOUGHBOOK INCL. BATTERY, USB CONNECTION AND WIFI
- ANTI-REFLECTIVE LCD TOUCHSCREEN
- SAFETY DEVICE DUAL LASER
- RIGID MEHAANITE MONOBLOCK CAST IRON BODY TENSILE STRENGTH 700N/MM²
- DIRECT DRIVE VIA SERVO MOTOR AND RECIRCULATING BALL SCREW
- 2-AXLE BACKGAUGE MOVES
- ERGONOMIC DESIGN

SPECIAL ACCESSORIES:
TEDA SPEED GRIP QUICK-CHANGE SYSTEM TOP, FOR STANDARD AMADA/PROMECAM TOOLS
6 AXES BACKGAUGE X1/X2/R1/R2/Z1/Z2
IRIS RAPID BEND, SAFETY DEVICE, TRAVELS AT RAPID TRAVERSE TO THE MUTE POINT

THE MACHINE CAN BE TRANSPORTED BY FORKL
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 55.000 €
Ubicación: Land-recon

-----------------------------------------------------------------------------
please note: we also have other various recon parts of different manufacturers / types in stock. 
we are pleased to provide you with our current stock list.


if you have any further questions do not hesitate to contact us
RECON ----------------------------------------------------------------------------- PLEASE NOTE: WE ALSO HAVE OTHER VARIOUS RECON PARTS OF DIFFERENT MANUFACTURERS / TYPES IN STOCK. WE ARE PLEASED TO PROVIDE YOU WITH OUR CURRENT STOCK LIST. IF YOU HAVE ANY FURTHER QUESTIONS DO NOT HESITATE TO CONTACT US
Vendedor: August Storm GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-grinding diameter: 350 mm<br/>grinding length: 1500 mm<br/>centre height: 175 mm<br/>control:  <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>basis:<br/>kellenberger kel-varia ur175-1500<br/>(fotos von bereits gelieferter maschine mit<br/>spitzenweite 1000mm)<br/><br/>schleifkopf ur mit t1-t2-t3<br/><br/>grundausstattung:<br/><br/>-b-achse hochauflösend<br/>-marposs messeinrichtung zur werkzeugvermessung<br/>-schwenken um die scheibenkante<br/>-aktive längspositionierung<br/>-gap an t1 berührungslos<br/>-v-konstant<br/>-reitstock  mit handrückzug<br/>-wss mit konus mk5, optional mit adapter mk5/kurzkegel<br/><br/>folgende ausstattungen frei wählbar:<br/><br/>-schleifscheibendurchmesser t1<br/>-schleifscheibendurchmesser t2<br/>-innenschleifeinrichtung riemengetrieben oder<br/>-innenschleifeinrichtung mit hf spindel<br/>-durchmesser-messeinrichtung<br/>-hydraulischer pinolenrückzug<br/>-mikroverstellung am reitstock<br/>-werkstückspindelstock mit mk5 und kurzkegelaufnahme din 55026<br/>-cnc-gesteuerte c-achse in verbindung mit werkstückspindelstock s.o.<br/>-unrundschleifen<br/>-verstärkter werkstückspindelstock<br/>-spitzenerhöhung<br/><br/>weitere optionen auf anfrage möglich<br/><br/>es werden ausschließlich konkrete anfragen mit genauer<br/>ausstattungskonfiguration von anwendern bearbeitet<br/><br/><br/>mechanische Überholung:<br/><br/>-komplette maschine nach kellenberger messprotokoll überholt<br/>-neue servicefreundliche kabine<br/>-neulackierung<br/><br/>elektrische Überholung:<br/><br/>-neue moderne cnc-rundschleifmaschinen-steuerung<br/>-neu aufgebauter schaltschrank<br/>-neue antriebstechnik<br/>-austausch sämtlicher elektrischer leitungen berus druckschalter etc.<br/>-neue absolut-glasmaßstäbe in x- und z<br/>-neuer absolut drehgeber (bei-b-achse)<br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/> GRINDING DIAMETER: 350 MM
GRINDING LENGTH: 1500 MM
CENTRE HEIGHT: 175 MM
CONTROL:
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
BASIS:
KELLENBERGER KEL-VARIA UR175-1500
(FOTOS VON BEREITS GELIEFERTER MASCHINE MIT
SPITZENWEITE 1000MM)

SCHLEIFKOPF UR MIT T1-T2-T3

GRUNDAUSSTATTUNG:

-B-ACHSE HOCHAUFLöSEND
-MARPOSS MESSEINRICHTUNG ZUR WERKZEUGVERMESSUNG
-SCHWENKEN UM DIE SCHEIBENKANTE
-AKTIVE LäNGSPOSITIONIERUNG
-GAP AN T1 BERüHRUNGSLOS
-V-KONSTANT
-REITSTOCK MIT HANDRüCKZUG
-WSS MIT KONUS MK5, OPTIONAL MIT ADAPTER MK5/KURZKEGEL

FOLGENDE AUSSTATTUNGEN FREI WäHLBAR:

-SCHLEIFSCHEIBENDURCHMESSER T1
-SCHLEIFSCHEIBENDURCHMESSER T2
-INNENSCHLEIFEINRICHTUNG RIEMENGETRIEBEN ODER
-INNENSCHLEIFEINRICHTUNG MIT HF SPINDEL
-DURCHMESSER-MESSEINRICHTUNG
-HYDRAULISCHER PINOLENRüCKZUG
-MIKROVERSTELLUNG AM REITSTOCK
-WERKSTüCKSPINDELSTOCK MIT MK5 UND KURZKEGELAUFNAHME DIN 55026
-CNC-GESTEUERTE C-ACHSE IN VERBINDUNG MIT WERKSTüCKSPINDELSTOCK S.O.
-UNRUNDSCHLEIFEN
-VERSTäRKTER WERKSTüCKSPINDELSTOCK
-SPITZENERHöHUNG

WEITERE OPTIONEN AUF ANFRAGE MöGLICH

ES WERDEN AUSSCHLIEßLICH KONKRETE ANFRAGEN MIT GENAUER
AUSSTATTUNGSKONFIGURATION VON ANWENDERN BEARBEITET


MECHANISCHE ÜBERHOLUNG:

-KOMPLETTE MASCHINE NACH KELLENBERGER MESSPROTOKOLL üBERHOLT
-NEUE SERVICEFREUNDLICHE KABINE
-NEULACKIERUNG

ELEKTRISCHE ÜBERHOLUNG:

-NEUE MODERNE CNC-RUNDSCHLEIFMASCHINEN-STEUERUNG
-NEU AUFGEBAUTER SCHALTSCHRANK
-NEUE ANTRIEBSTECHNIK
-AUSTAUSCH SäMTLICHER ELEKTRISCHER LEITUNGEN BERUS DRUCKSCHALTER ETC.
-NEUE ABSOLUT-GLASMAßSTäBE IN X- UND Z
-NEUER ABSOLUT DREHGEBER (BEI-B-ACHSE)










Vendedor: BEMA
Año de construcción: usado
Precio: 17.500 €
Ubicación: Land-recon

crank shaft
-1 level undersize
-operating hours: 0h

-----------------------------------------------------------------------------
please note: we also have other various recon parts of different manufacturers / types in stock. 
we are pleased to provide you with our current stock list.


if you have any further questions do not hesitate to contact us
RECON CRANK SHAFT -1 LEVEL UNDERSIZE -OPERATING HOURS: 0H ----------------------------------------------------------------------------- PLEASE NOTE: WE ALSO HAVE OTHER VARIOUS RECON PARTS OF DIFFERENT MANUFACTURERS / TYPES IN STOCK. WE ARE PLEASED TO PROVIDE YOU WITH OUR CURRENT STOCK LIST. IF YOU HAVE ANY FURTHER QUESTIONS DO NOT HESITATE TO CONTACT US
Vendedor: August Storm GmbH & Co. KG
Año de construcción: usado
Precio: used machinery auction RESALE 2.670 €
Ubicación: Land-weight approx.: 4500 kg<br/>dimensions (l x w x h) approx.: 3500 x 2500 x 2200 mm<br/>description: boehringer vdf dn 570 lathe<br> <br> with 3-jaw chuck smw, diameter 250 mm, 8-fold tool turret, hydraulic tailstock, turning diameter over bed approx. 570 mm, turning length 1000 mm, with various tool change holders WEIGHT APPROX.: 4500 KG
DIMENSIONS (L X W X H) APPROX.: 3500 X 2500 X 2200 MM
DESCRIPTION: BOEHRINGER VDF DN 570 LATHE

WITH 3-JAW CHUCK SMW, DIAMETER 250 MM, 8-FOLD TOOL TURRET, HYDRAULIC TAILSTOCK, TURNING DIAMETER OVER BED APPROX. 570 MM, TURNING LENGTH 1000 MM, WITH VARIOUS TOOL CHANGE HOLDERS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 1 600 mm,
table diameter: 1,400 mm,
max workpiece height: 1,000 mm,
max weight of workpiece: 5,000 kg,
max. longitudinal feed headstock: 630 mm,
maximum slide feed: 975 mm,
max vertical feed headstock: 700 mm,
max vertical slide feed: 1,000 mm,
speed range: 16,
slider feeds: 0.07 - 12.5 mm / rev,
distance between the table and the headstock: 0-1 225 mm,
main engine power: 30 kw,
speed range: 4-200 rpm,
dimensions of the machine: 3 190 x 3 360 x 4 100 mm,
machine weight: 18,000 kg.
 TURNING DIAMETER: 1 600 MM, TABLE DIAMETER: 1,400 MM, MAX WORKPIECE HEIGHT: 1,000 MM, MAX WEIGHT OF WORKPIECE: 5,000 KG, MAX. LONGITUDINAL FEED HEADSTOCK: 630 MM, MAXIMUM SLIDE FEED: 975 MM, MAX VERTICAL FEED HEADSTOCK: 700 MM, MAX VERTICAL SLIDE FEED: 1,000 MM, SPEED RANGE: 16, SLIDER FEEDS: 0.07 - 12.5 MM / REV, DISTANCE BETWEEN THE TABLE AND THE HEADSTOCK: 0-1 225 MM, MAIN ENGINE POWER: 30 KW, SPEED RANGE: 4-200 RPM, DIMENSIONS OF THE MACHINE: 3 190 X 3 360 X 4 100 MM, MACHINE WEIGHT: 18,000 KG.
Vendedor: Blachmix
Año de construcción: usado
Precio: used machinery auction RESALE 7.000 €
Ubicación: Land-weight approx.: 7500 kg<br/>dimensions (l x w x h) approx.: 2300 x 3500 x 2300 mm<br/>description: maho mh1000c machining centre<br> <br> serial number 11900<br> operating hours approx. 36526,7 h<br> adjustment of the cross monitor in the horizontal longitudinal axis ( x-axis) 1000 mm, on machines with swivel rotary table 870 mm, in the vertical axis (y-axis) 500 mm<br> headstock adjustment in the horizontal transverse axis (z-axis) 700 mm<br> tool holder 50 iso, clamping force of the tool clamp iso type b, clamping spigot 23 kn<br> working spindle speeds, directly programmable 20 - 3200 rpm. correction of the programmed speeds (overvide) 80 - 120%, feeds, directly programmable in the x-, y- and z-axes 1 - 3000 mm/min.<br> rapid traverse in the x- and z-axes 6 m/min, in the y-axis 5 m/min<br> feed rate and rapid traverse speed compensation (override) in x-, y- and z-axes 0 - 140 %<br> number of magazine places 20 pcs.<br> tool shank iso 50, din 69871/1 with pull studs iso/dis 7388/ii, type b<br> max. tool diameter 160 mm, when all slots are occupied 125 mm, max. tool length (from spindle nose) 400 mm, max. tool weight 12 kg, compressed air connection approx. 6 - 7 bar<br> voltage 220 / 380 v, frequency 50 / 60 hz, total connected load of the machine 3.2,0 kva<br> resolution of the linear displacement measuring system 0,001 mm, measured value displays screen<br> <br> package 1: main machine 2300 x 3500 x 2300 mm, 8000 kg, package 2: euro pallet with accessories 2500 x 1000 x 1200 mm, 500 kg loading area on truck 5m<br> WEIGHT APPROX.: 7500 KG
DIMENSIONS (L X W X H) APPROX.: 2300 X 3500 X 2300 MM
DESCRIPTION: MAHO MH1000C MACHINING CENTRE

SERIAL NUMBER 11900
OPERATING HOURS APPROX. 36526,7 H
ADJUSTMENT OF THE CROSS MONITOR IN THE HORIZONTAL LONGITUDINAL AXIS ( X-AXIS) 1000 MM, ON MACHINES WITH SWIVEL ROTARY TABLE 870 MM, IN THE VERTICAL AXIS (Y-AXIS) 500 MM
HEADSTOCK ADJUSTMENT IN THE HORIZONTAL TRANSVERSE AXIS (Z-AXIS) 700 MM
TOOL HOLDER 50 ISO, CLAMPING FORCE OF THE TOOL CLAMP ISO TYPE B, CLAMPING SPIGOT 23 KN
WORKING SPINDLE SPEEDS, DIRECTLY PROGRAMMABLE 20 - 3200 RPM. CORRECTION OF THE PROGRAMMED SPEEDS (OVERVIDE) 80 - 120%, FEEDS, DIRECTLY PROGRAMMABLE IN THE X-, Y- AND Z-AXES 1 - 3000 MM/MIN.
RAPID TRAVERSE IN THE X- AND Z-AXES 6 M/MIN, IN THE Y-AXIS 5 M/MIN
FEED RATE AND RAPID TRAVERSE SPEED COMPENSATION (OVERRIDE) IN X-, Y- AND Z-AXES 0 - 140 %
NUMBER OF MAGAZINE PLACES 20 PCS.
TOOL SHANK ISO 50, DIN 69871/1 WITH PULL STUDS ISO/DIS 7388/II, TYPE B
MAX. TOOL DIAMETER 160 MM, WHEN ALL SLOTS ARE OCCUPIED 125 MM, MAX. TOOL LENGTH (FROM SPINDLE NOSE) 400 MM, MAX. TOOL WEIGHT 12 KG, COMPRESSED AIR CONNECTION APPROX. 6 - 7 BAR
VOLTAGE 220 / 380 V, FREQUENCY 50 / 60 HZ, TOTAL CONNECTED LOAD OF THE MACHINE 3.2,0 KVA
RESOLUTION OF THE LINEAR DISPLACEMENT MEASURING SYSTEM 0,001 MM, MEASURED VALUE DISPLAYS SCREEN

PACKAGE 1: MAIN MACHINE 2300 X 3500 X 2300 MM, 8000 KG, PACKAGE 2: EURO PALLET WITH ACCESSORIES 2500 X 1000 X 1200 MM, 500 KG LOADING AREA ON TRUCK 5M
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-gebr. universal circular grinding machine make knuth
	model multigrind. no.: 155277 year of 2012

max grinding diameter 200 mm
	max workpiece length 500 mm
	wheel 200 x 20 x 75 mm
	speed work headstock 110, 200, 300 rpm
	grinding spindle speed 2500 rpm
	work headstock swivel â± 90 â°
	grinding spindle stock swiveling â± 90 â°
	table swivel range + 45 â° - 30 â°
	longitudinal feed hydr.		0.01-6 m / min
	tailstock taper mk 2
	total power consumption 2.5 kw
	external dimensions:
	width 1600 mm
		depth 1350 mm
		height 1400 mm
	weight approx.		1300 kg
	with:
	coolant system
		extraction device
		internal grinding device
		machine lamp
		3 - jaw chuck 100 mm ã?
		vise
		tool sharpener
 GEBR. UNIVERSAL CIRCULAR GRINDING MACHINE MAKE KNUTH MODEL MULTIGRIND. NO.: 155277 YEAR OF 2012 MAX GRINDING DIAMETER 200 MM MAX WORKPIECE LENGTH 500 MM WHEEL 200 X 20 X 75 MM SPEED WORK HEADSTOCK 110, 200, 300 RPM GRINDING SPINDLE SPEED 2500 RPM WORK HEADSTOCK SWIVEL &ACIRC;&PLUSMN; 90 &ACIRC;&DEG; GRINDING SPINDLE STOCK SWIVELING &ACIRC;&PLUSMN; 90 &ACIRC;&DEG; TABLE SWIVEL RANGE + 45 &ACIRC;&DEG; - 30 &ACIRC;&DEG; LONGITUDINAL FEED HYDR. 0.01-6 M / MIN TAILSTOCK TAPER MK 2 TOTAL POWER CONSUMPTION 2.5 KW EXTERNAL DIMENSIONS: WIDTH 1600 MM DEPTH 1350 MM HEIGHT 1400 MM WEIGHT APPROX. 1300 KG WITH: COOLANT SYSTEM EXTRACTION DEVICE INTERNAL GRINDING DEVICE MACHINE LAMP 3 - JAW CHUCK 100 MM &ATILDE;? VISE TOOL SHARPENER
Vendedor: RUDOLF BANDMANN WERKZEUGMASCHINEN e.K.
Año de construcción: usado
Precio: used machinery auction RESALE 8.000 €
Ubicación: Land-weight approx.: 1400 kg<br/>dimensions (l x w x h) approx.: 2300 x 1100 x 1900 mm<br/>description: weiler commodor lathe<br> <br> turning length max. 1000 mm, dimension over bed approx. 225 mm, 3-jaw chuck diameter approx. 200 mm, incl. steady rest and tailstock, digital display axesta visulesta 400, main machine 2300 x 1100 x 1900 mm, 1400 kg, euro pallet with accessories, tubs etc. 1400 x 1000 x 1000 mm, 150 kg, bar passage approx. 55 mm diameter without quick-release turning devices WEIGHT APPROX.: 1400 KG
DIMENSIONS (L X W X H) APPROX.: 2300 X 1100 X 1900 MM
DESCRIPTION: WEILER COMMODOR LATHE

TURNING LENGTH MAX. 1000 MM, DIMENSION OVER BED APPROX. 225 MM, 3-JAW CHUCK DIAMETER APPROX. 200 MM, INCL. STEADY REST AND TAILSTOCK, DIGITAL DISPLAY AXESTA VISULESTA 400, MAIN MACHINE 2300 X 1100 X 1900 MM, 1400 KG, EURO PALLET WITH ACCESSORIES, TUBS ETC. 1400 X 1000 X 1000 MM, 150 KG, BAR PASSAGE APPROX. 55 MM DIAMETER WITHOUT QUICK-RELEASE TURNING DEVICES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-technical data:

-mot 3. driven roller - hydr. delivery of the two bottom rollers + the two setup roles / lead role
-the machine is 240 n / mmâ² strength of the material / yield point horizontally or vertically can be used-
/ re max torque 25
-bending performance: - flat stock - upright 80 x 20 mm ã? 800 mm - flat 140 x 30 mm ã? 700 mm
-hea 120 ã? 1000 mm
-tubular 88.9 x 3, 2 ã? 1000 mm
-bending speed 0-5 m / min
-roll diameter 290 mm
-shaft diameter 90 mm
-drive 400 v / 9,2 kw
-with:-analogue actual value indicators
-standart bending set for flat and angle material - div. tube roller sets 28; 48.3; 
	-weight approx.						2000 kg
	-space requirement approx.		            b h 1600 x 1300 x 1400 mm    
 TECHNICAL DATA: -MOT 3. DRIVEN ROLLER - HYDR. DELIVERY OF THE TWO BOTTOM ROLLERS + THE TWO SETUP ROLES / LEAD ROLE -THE MACHINE IS 240 N / MM&ACIRC;&SUP2; STRENGTH OF THE MATERIAL / YIELD POINT HORIZONTALLY OR VERTICALLY CAN BE USED- / RE MAX TORQUE 25 -BENDING PERFORMANCE: - FLAT STOCK - UPRIGHT 80 X 20 MM &ATILDE;? 800 MM - FLAT 140 X 30 MM &ATILDE;? 700 MM -HEA 120 &ATILDE;? 1000 MM -TUBULAR 88.9 X 3, 2 &ATILDE;? 1000 MM -BENDING SPEED 0-5 M / MIN -ROLL DIAMETER 290 MM -SHAFT DIAMETER 90 MM -DRIVE 400 V / 9,2 KW -WITH:-ANALOGUE ACTUAL VALUE INDICATORS -STANDART BENDING SET FOR FLAT AND ANGLE MATERIAL - DIV. TUBE ROLLER SETS 28; 48.3; -WEIGHT APPROX. 2000 KG -SPACE REQUIREMENT APPROX. B H 1600 X 1300 X 1400 MM
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: used machinery auction RESALE 1.500 €
Ubicación: Land-weight approx.: 3000 kg<br/>dimensions (l x w x h) approx.: 5000 x 2300 x 2000 mm<br/>description: diameter of grinding 15÷100 mm. length of grinding 120 mm. headstock round of millholder -30º/+90º. serial nº 200317. internal reference 260.307 WEIGHT APPROX.: 3000 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 2300 X 2000 MM
DESCRIPTION: DIAMETER OF GRINDING 15÷100 MM. LENGTH OF GRINDING 120 MM. HEADSTOCK ROUND OF MILLHOLDER -30º/+90º. SERIAL Nº 200317. INTERNAL REFERENCE 260.307
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more STOCK types: