131 ofertas

Año de construcción: usado
Ubicación: Land-machine specification

year: 2006 
control unit: ec100 
robot: battenfeld 

injection unit: es 2500/...
screw diameter: 70 mm 
injection pressure: 2200 bar 
injection volume: 1100 ccm 
shot capacity: 930 g 

clamping unit: .../390 k sl
clamping force: 390 t 
platen size: 1080 x 1080 mm 
distance between tie bars: 735 x 735 mm 
mould height: 250...660 mm 
opening storke: 700 mm 
max.daylight: 1360 mm 
ejector stroke: 240 mm 
drive power of the hydraulic pump: 55 kw 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 8,05 x 1,9 x 2,04 m 
weight: 23.000 kg 

equipment:
- machine is equipped with a battenfeld robot
- fast runner machine
- accumulator
- needle valve nozzle
- srew drive by three phase motor
- bimetallic barrels
- 1 x core pull
- 16 x temperature controller for mould hotrunner
- 3 x pneumatic valve MACHINE SPECIFICATION YEAR: 2006 CONTROL UNIT: EC100 ROBOT: BATTENFELD INJECTION UNIT: ES 2500/... SCREW DIAMETER: 70 MM INJECTION PRESSURE: 2200 BAR INJECTION VOLUME: 1100 CCM SHOT CAPACITY: 930 G CLAMPING UNIT: .../390 K SL CLAMPING FORCE: 390 T PLATEN SIZE: 1080 X 1080 MM DISTANCE BETWEEN TIE BARS: 735 X 735 MM MOULD HEIGHT: 250...660 MM OPENING STORKE: 700 MM MAX.DAYLIGHT: 1360 MM EJECTOR STROKE: 240 MM DRIVE POWER OF THE HYDRAULIC PUMP: 55 KW GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 8,05 X 1,9 X 2,04 M WEIGHT: 23.000 KG EQUIPMENT: - MACHINE IS EQUIPPED WITH A BATTENFELD ROBOT - FAST RUNNER MACHINE - ACCUMULATOR - NEEDLE VALVE NOZZLE - SREW DRIVE BY THREE PHASE MOTOR - BIMETALLIC BARRELS - 1 X CORE PULL - 16 X TEMPERATURE CONTROLLER FOR MOULD HOTRUNNER - 3 X PNEUMATIC VALVE
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-pump circulationpump, make stork-pompen, type ccr 32 200, new 1992, material stainless steel, capacity 5 - 7,3 m3/h, pressure 16 bar, with motor, with motor 4 kw, 380 / 660 volt (ex), inlet 50mm, outlet 30mm, mach.no. l 051588001, mounted on frame, floorspace 0,9x0,4 m, total height 0,5 m, weight 100 kgpumpspumps > pumps PUMP CIRCULATIONPUMP, MAKE STORK-POMPEN, TYPE CCR 32 200, NEW 1992, MATERIAL STAINLESS STEEL, CAPACITY 5 - 7,3 M3/H, PRESSURE 16 BAR, WITH MOTOR, WITH MOTOR 4 KW, 380 / 660 VOLT (EX), INLET 50MM, OUTLET 30MM, MACH.NO. L 051588001, MOUNTED ON FRAME, FLOORSPACE 0,9X0,4 M, TOTAL HEIGHT 0,5 M, WEIGHT 100 KGPUMPSPUMPS > PUMPS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-machine specification

year: 2000 

injection unit: 280/...
screw diameter: 20 mm 
injection pressure: 2000 bar 
injection volume: 280 ccm 
shot capacity: - g 

clamping unit: .../60
clamping force: 60 t 
platen size: 620 x 560 mm 
distance between tie bars: hl mm 
mould height: 400 mm 
opening storke: 450 mm 
max.daylight: 850 mm 
ejector stroke: 100 mm 
drive power of the hydraulic pump: 15 kw 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 3,9 x 3,2 x 3,2 m 
weight: 5.100 kg 

equipment:
- serial number: 40153
- 2 x core pull
- interface for conveyor belt
- 9 x circuits for mould heating
- 3 x expansion cards tt081  with 8x additional circuits
- tft- colour flat screen
- quality monitoring system qualipack i
- min. mould height increased about 100 mm  MACHINE SPECIFICATION YEAR: 2000 INJECTION UNIT: 280/... SCREW DIAMETER: 20 MM INJECTION PRESSURE: 2000 BAR INJECTION VOLUME: 280 CCM SHOT CAPACITY: - G CLAMPING UNIT: .../60 CLAMPING FORCE: 60 T PLATEN SIZE: 620 X 560 MM DISTANCE BETWEEN TIE BARS: HL MM MOULD HEIGHT: 400 MM OPENING STORKE: 450 MM MAX.DAYLIGHT: 850 MM EJECTOR STROKE: 100 MM DRIVE POWER OF THE HYDRAULIC PUMP: 15 KW GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 3,9 X 3,2 X 3,2 M WEIGHT: 5.100 KG EQUIPMENT: - SERIAL NUMBER: 40153 - 2 X CORE PULL - INTERFACE FOR CONVEYOR BELT - 9 X CIRCUITS FOR MOULD HEATING - 3 X EXPANSION CARDS TT081 WITH 8X ADDITIONAL CIRCUITS - TFT- COLOUR FLAT SCREEN - QUALITY MONITORING SYSTEM QUALIPACK I - MIN. MOULD HEIGHT INCREASED ABOUT 100 MM
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-reactor (1x), make stork plaatwellerij velsen, no 1308, new 1979, material stainless steel (1.4571), capacity 1000 ltr, useful 800 ltr, vessel sizes dia. 1042x1000mm, conical bottom, dished top side, manhole /hand hole dia. 200mm, top connections dia. 150mm + dia. 40mm + 2x dia. 25mm, outlet dia. 145mm, working pressure vac/4,5 bar, test pressure 6,3 bar, with jacket (80 ltr), working pressure 3 bar, test pressure 5,6 bar, max. temperature 150 degr. c., with propellor stirrer make ekato, type em-060, motor 11,0 kw, 380/660 volt (ex), floorspace 1,4x1,4 m, total height 3,0 mreactorsreactors > reactors REACTOR (1X), MAKE STORK PLAATWELLERIJ VELSEN, NO 1308, NEW 1979, MATERIAL STAINLESS STEEL (1.4571), CAPACITY 1000 LTR, USEFUL 800 LTR, VESSEL SIZES DIA. 1042X1000MM, CONICAL BOTTOM, DISHED TOP SIDE, MANHOLE /HAND HOLE DIA. 200MM, TOP CONNECTIONS DIA. 150MM + DIA. 40MM + 2X DIA. 25MM, OUTLET DIA. 145MM, WORKING PRESSURE VAC/4,5 BAR, TEST PRESSURE 6,3 BAR, WITH JACKET (80 LTR), WORKING PRESSURE 3 BAR, TEST PRESSURE 5,6 BAR, MAX. TEMPERATURE 150 DEGR. C., WITH PROPELLOR STIRRER MAKE EKATO, TYPE EM-060, MOTOR 11,0 KW, 380/660 VOLT (EX), FLOORSPACE 1,4X1,4 M, TOTAL HEIGHT 3,0 MREACTORSREACTORS > REACTORS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-machine specification

year: 1998 
control unit: unilog 4000 b 

injection unit: .../315 cdc
screw diameter: 35 mm 
injection pressure: 2057 bar 
injection volume: 154 ccm 
shot capacity: 140 g 

clamping unit: ba 1000/...
clamping force: 100 t 
platen size: 640 x 640 mm 
distance between tie bars: 420 x 420 mm 
mould height: 250 mm 
opening storke: 475 mm 
max.daylight: 725 mm 
ejector stroke: 150 mm 

general information:
delivery time: off hand 
machine dimensions(m) lxwxh: 4,4 x 1,3 x 2,0 m 
weight: 4.600 kg 

equipment:
- serial number: c100906820989 MACHINE SPECIFICATION YEAR: 1998 CONTROL UNIT: UNILOG 4000 B INJECTION UNIT: .../315 CDC SCREW DIAMETER: 35 MM INJECTION PRESSURE: 2057 BAR INJECTION VOLUME: 154 CCM SHOT CAPACITY: 140 G CLAMPING UNIT: BA 1000/... CLAMPING FORCE: 100 T PLATEN SIZE: 640 X 640 MM DISTANCE BETWEEN TIE BARS: 420 X 420 MM MOULD HEIGHT: 250 MM OPENING STORKE: 475 MM MAX.DAYLIGHT: 725 MM EJECTOR STROKE: 150 MM GENERAL INFORMATION: DELIVERY TIME: OFF HAND MACHINE DIMENSIONS(M) LXWXH: 4,4 X 1,3 X 2,0 M WEIGHT: 4.600 KG EQUIPMENT: - SERIAL NUMBER: C100906820989
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-reactor (1x), make stork plaatwellerij velsen, no 5854, new 1976, fluid stirrer built in 1999, material stainless steel (1.4571), capacity 2560 ltr, useful 2000 ltr, vessel sizes dia. 1380x1300mm, conical bottom, dished top side, manhole /hand hole dia. 200mm, top connections (9x), outlet dia. 150mm, working pressure vac/3 bar, test pressure 4,2 bar, with jacket (125 ltr), working pressure 3 bar, test pressure 5,6 bar, max. temperature 150 degr. c., with gate type stirrer make fluid, type fkl-80, motor 11,0 kw, 400/690 volt (ex), floorspace 1,8x1,8 m, total height 4,0 mreactorsreactors > reactors REACTOR (1X), MAKE STORK PLAATWELLERIJ VELSEN, NO 5854, NEW 1976, FLUID STIRRER BUILT IN 1999, MATERIAL STAINLESS STEEL (1.4571), CAPACITY 2560 LTR, USEFUL 2000 LTR, VESSEL SIZES DIA. 1380X1300MM, CONICAL BOTTOM, DISHED TOP SIDE, MANHOLE /HAND HOLE DIA. 200MM, TOP CONNECTIONS (9X), OUTLET DIA. 150MM, WORKING PRESSURE VAC/3 BAR, TEST PRESSURE 4,2 BAR, WITH JACKET (125 LTR), WORKING PRESSURE 3 BAR, TEST PRESSURE 5,6 BAR, MAX. TEMPERATURE 150 DEGR. C., WITH GATE TYPE STIRRER MAKE FLUID, TYPE FKL-80, MOTOR 11,0 KW, 400/690 VOLT (EX), FLOORSPACE 1,8X1,8 M, TOTAL HEIGHT 4,0 MREACTORSREACTORS > REACTORS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-machine specification

year: 2003 
control unit: mc4 

injection unit: .../1000
screw diameter: 55 mm 
injection pressure: 1904 bar 
injection volume: 523 ccm 
shot capacity: 476 g 

clamping unit: 200/...
clamping force: 200 t 
platen size: 915 x 910 mm 
distance between tie bars: 560 x 560 mm 
mould height: 350 mm 
opening storke: 700 mm 
max.daylight: 1050 mm 
ejector stroke: 200 mm 
drive power of the hydraulic pump: 37 kw 
cylinder heating power: 18 kw 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 5,35 x 1,90 x 2,25 m 
weight: 10550 kg 

equipment:
- 1 x pneumatic valve
- 1 x core pulls
- quality package
- increased oil cooler
- mecanic interface euromap 18 MACHINE SPECIFICATION YEAR: 2003 CONTROL UNIT: MC4 INJECTION UNIT: .../1000 SCREW DIAMETER: 55 MM INJECTION PRESSURE: 1904 BAR INJECTION VOLUME: 523 CCM SHOT CAPACITY: 476 G CLAMPING UNIT: 200/... CLAMPING FORCE: 200 T PLATEN SIZE: 915 X 910 MM DISTANCE BETWEEN TIE BARS: 560 X 560 MM MOULD HEIGHT: 350 MM OPENING STORKE: 700 MM MAX.DAYLIGHT: 1050 MM EJECTOR STROKE: 200 MM DRIVE POWER OF THE HYDRAULIC PUMP: 37 KW CYLINDER HEATING POWER: 18 KW GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 5,35 X 1,90 X 2,25 M WEIGHT: 10550 KG EQUIPMENT: - 1 X PNEUMATIC VALVE - 1 X CORE PULLS - QUALITY PACKAGE - INCREASED OIL COOLER - MECANIC INTERFACE EUROMAP 18
Vendedor: EuropNet GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 4.900 €
Ubicación: Land-weight approx.: 30000 kg<br/>dimensions (l x w x h) approx.: 9434 x 2100 x 2515 mm<br/>description: <b><u>stork sx-n 5500-3500 injection moulding machine with wemo loading unit</u></b> <br> <br> - model: sx-n 5500-3500<br> - year of manufacture: 1999<br> - machine number: x55018<br> - comes with wemo loading unit<br> <br> - clamping force: 550 t<br> - tonnage group: g500-660 t<br> - heating power: 33 kw<br> - pump power: 90 kw<br> - screw diameter: 84 mm<br> - cylinder head volume: 2106 cm³<br> - screw type: standart<br> - max injection pressure: 1600 bar<br> - max screw rotation: 125 rpm<br> - cores number: 2<br> - platen guide type: column<br> - distance between columns: 830 mm<br> - opening stroke: 850 mm<br> - max mould weight: 7100 kg<br> <br> <b><u>out of order, to replace closing valve and open/close hydraulic cylinder</u></b> <b><u>the article must be picked up till 12/15/2018!</u></b> WEIGHT APPROX.: 30000 KG
DIMENSIONS (L X W X H) APPROX.: 9434 X 2100 X 2515 MM
DESCRIPTION: STORK SX-N 5500-3500 INJECTION MOULDING MACHINE WITH WEMO LOADING UNIT

- MODEL: SX-N 5500-3500
- YEAR OF MANUFACTURE: 1999
- MACHINE NUMBER: X55018
- COMES WITH WEMO LOADING UNIT

- CLAMPING FORCE: 550 T
- TONNAGE GROUP: G500-660 T
- HEATING POWER: 33 KW
- PUMP POWER: 90 KW
- SCREW DIAMETER: 84 MM
- CYLINDER HEAD VOLUME: 2106 CM³
- SCREW TYPE: STANDART
- MAX INJECTION PRESSURE: 1600 BAR
- MAX SCREW ROTATION: 125 RPM
- CORES NUMBER: 2
- PLATEN GUIDE TYPE: COLUMN
- DISTANCE BETWEEN COLUMNS: 830 MM
- OPENING STROKE: 850 MM
- MAX MOULD WEIGHT: 7100 KG

OUT OF ORDER, TO REPLACE CLOSING VALVE AND OPEN/CLOSE HYDRAULIC CYLINDER THE ARTICLE MUST BE PICKED UP TILL 12/15/2018!
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-machine specification

year: 2005 
control unit: unilog b4 

injection unit: .../1330
screw diameter: 55 mm 
injection pressure: 2041 bar 
injection volume: 653 ccm 
shot capacity: 594 g 

clamping unit: hm 270/...
clamping force: 270 t 
platen size: 1020 x 940 mm 
distance between tie bars: 710 x 630 mm 
mould height: 350... mm 
opening storke: 425 mm 
max.daylight: 1200 mm 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 5,7 x 2,4 x 2,2 m 
weight: 12.000 kg 

equipment:
- 2 x core pull on movable wap
- 1 x core pull on fixed wap
- 1 x pneumatic valve MACHINE SPECIFICATION YEAR: 2005 CONTROL UNIT: UNILOG B4 INJECTION UNIT: .../1330 SCREW DIAMETER: 55 MM INJECTION PRESSURE: 2041 BAR INJECTION VOLUME: 653 CCM SHOT CAPACITY: 594 G CLAMPING UNIT: HM 270/... CLAMPING FORCE: 270 T PLATEN SIZE: 1020 X 940 MM DISTANCE BETWEEN TIE BARS: 710 X 630 MM MOULD HEIGHT: 350... MM OPENING STORKE: 425 MM MAX.DAYLIGHT: 1200 MM GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 5,7 X 2,4 X 2,2 M WEIGHT: 12.000 KG EQUIPMENT: - 2 X CORE PULL ON MOVABLE WAP - 1 X CORE PULL ON FIXED WAP - 1 X PNEUMATIC VALVE
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-kartonverschliesser / verkleber <br/>id5211 KARTONVERSCHLIESSER / VERKLEBER
ID5211
Vendedor: Seegräber GmbH
Año de construcción: usado
Ubicación: Land-machine specification

year: 1998 
control unit: cc 100 

injection unit: 1350/...
screw diameter: 90 mm 
injection pressure: 1910 bar 
injection volume: 2480 ccm 
shot capacity: 2256 g 

clamping unit: .../1200
clamping force: 1200 t 
platen size: 1990 x 1740 mm 
distance between tie bars: 1400 x 1150 mm 
mould height: 500...1200 mm 
opening storke: 1100 mm 
max.daylight: 2300 mm 
ejector stroke: 300 mm 

general information:
delivery time: now 
weight: 78.000 kg 

equipment:
- optional: 2 component machine, additional screw: 70 mm diameter
- cascade 8-times pneumatic
- cascade 8-times hydraulic
- 32 zone hotrunner controller MACHINE SPECIFICATION YEAR: 1998 CONTROL UNIT: CC 100 INJECTION UNIT: 1350/... SCREW DIAMETER: 90 MM INJECTION PRESSURE: 1910 BAR INJECTION VOLUME: 2480 CCM SHOT CAPACITY: 2256 G CLAMPING UNIT: .../1200 CLAMPING FORCE: 1200 T PLATEN SIZE: 1990 X 1740 MM DISTANCE BETWEEN TIE BARS: 1400 X 1150 MM MOULD HEIGHT: 500...1200 MM OPENING STORKE: 1100 MM MAX.DAYLIGHT: 2300 MM EJECTOR STROKE: 300 MM GENERAL INFORMATION: DELIVERY TIME: NOW WEIGHT: 78.000 KG EQUIPMENT: - OPTIONAL: 2 COMPONENT MACHINE, ADDITIONAL SCREW: 70 MM DIAMETER - CASCADE 8-TIMES PNEUMATIC - CASCADE 8-TIMES HYDRAULIC - 32 ZONE HOTRUNNER CONTROLLER
Vendedor: EuropNet GmbH
Año de construcción: usado
Precio: 690 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-machine specification

year: 2001 
control unit: unilog 9000 c 
robot: unirob r15 

injection unit: .../5400
screw diameter: 85 mm 
injection pressure: 1612 bar 
injection volume: 2856 ccm 
shot capacity: 2600 g 

clamping unit: hm 6500/...
clamping force: 650 t 
platen size: 1400 x 1400 mm 
distance between tie bars: 1000 x 1000 mm 
mould height: 600...1000 mm 
opening storke: 1000 mm 
max.daylight: 2000 mm 
ejector stroke: 250 mm 
drive power of the hydraulic pump: 74 kw 
cylinder heating power: 56,8 kw 
general information:

delivery time: now 
machine dimensions(m) lxwxh: 9.73 x 2.19 x 2.56 m 
weight: 41.000 kg 

equipment:
- bimetallic barrel
- 2 x pneumatic valve
- 2 x core pull
- increased oil cooler
- with conveyor belt
- robot interface as per euromap 12 MACHINE SPECIFICATION YEAR: 2001 CONTROL UNIT: UNILOG 9000 C ROBOT: UNIROB R15 INJECTION UNIT: .../5400 SCREW DIAMETER: 85 MM INJECTION PRESSURE: 1612 BAR INJECTION VOLUME: 2856 CCM SHOT CAPACITY: 2600 G CLAMPING UNIT: HM 6500/... CLAMPING FORCE: 650 T PLATEN SIZE: 1400 X 1400 MM DISTANCE BETWEEN TIE BARS: 1000 X 1000 MM MOULD HEIGHT: 600...1000 MM OPENING STORKE: 1000 MM MAX.DAYLIGHT: 2000 MM EJECTOR STROKE: 250 MM DRIVE POWER OF THE HYDRAULIC PUMP: 74 KW CYLINDER HEATING POWER: 56,8 KW GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 9.73 X 2.19 X 2.56 M WEIGHT: 41.000 KG EQUIPMENT: - BIMETALLIC BARREL - 2 X PNEUMATIC VALVE - 2 X CORE PULL - INCREASED OIL COOLER - WITH CONVEYOR BELT - ROBOT INTERFACE AS PER EUROMAP 12
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-screw size: 62 mm<br/>injection shot weight in polysterol: 903 g/ps<br/>closing pressure: 3300 kn<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> SCREW SIZE: 62 MM
INJECTION SHOT WEIGHT IN POLYSTEROL: 903 G/PS
CLOSING PRESSURE: 3300 KN
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-machine specification

year: 2002 

injection unit: vc 330/...
screw diameter: 35 mm 
injection pressure: 1600 bar 
injection volume: 154 ccm 
shot capacity: 144 g 

clamping unit: .../110
clamping force: 110 t 
platen size: 740 x 680 mm 
distance between tie bars: . mm 
mould height: 300 mm 
opening storke: 500 mm 
max.daylight: 800 mm 
ejector stroke: 130 mm 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 4,4 x 1,5 x 2,1 m 
weight: 7.300 kg 

equipment:
- 2 x core pulls ( extensions to 3 core pulls ) 
- 3 x pneumatic valve
- incl. second injection unit (screw diameter 25 mm) MACHINE SPECIFICATION YEAR: 2002 INJECTION UNIT: VC 330/... SCREW DIAMETER: 35 MM INJECTION PRESSURE: 1600 BAR INJECTION VOLUME: 154 CCM SHOT CAPACITY: 144 G CLAMPING UNIT: .../110 CLAMPING FORCE: 110 T PLATEN SIZE: 740 X 680 MM DISTANCE BETWEEN TIE BARS: . MM MOULD HEIGHT: 300 MM OPENING STORKE: 500 MM MAX.DAYLIGHT: 800 MM EJECTOR STROKE: 130 MM GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 4,4 X 1,5 X 2,1 M WEIGHT: 7.300 KG EQUIPMENT: - 2 X CORE PULLS ( EXTENSIONS TO 3 CORE PULLS ) - 3 X PNEUMATIC VALVE - INCL. SECOND INJECTION UNIT (SCREW DIAMETER 25 MM)
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-screw size: 57 mm<br/>injection shot weight in polysterol: unbkt. g/ps<br/>closing pressure: 250 kn<br/>volumn: 530 <br/>volt:  v<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> SCREW SIZE: 57 MM
INJECTION SHOT WEIGHT IN POLYSTEROL: UNBKT. G/PS
CLOSING PRESSURE: 250 KN
VOLUMN: 530
VOLT: V
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-machine specification

year: 2005 
control unit: unilog b4 

injection unit: .../1330
screw diameter: 55 mm 
injection pressure: 2041 bar 
injection volume: 653 ccm 
shot capacity: 594 g 

clamping unit: hm 270/...
clamping force: 270 t 
platen size: 1020 x 940 mm 
distance between tie bars: 710 x 630 mm 
mould height: 350... mm 
opening storke: 425 mm 
max.daylight: 1200 mm 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 5,7 x 2,4 x 2,2 m 
weight: 12.000 kg 

equipment:
- 2 x core pull on movable wap
- 1 x core pull on fixed wap
- 1 x pneumatic valve MACHINE SPECIFICATION YEAR: 2005 CONTROL UNIT: UNILOG B4 INJECTION UNIT: .../1330 SCREW DIAMETER: 55 MM INJECTION PRESSURE: 2041 BAR INJECTION VOLUME: 653 CCM SHOT CAPACITY: 594 G CLAMPING UNIT: HM 270/... CLAMPING FORCE: 270 T PLATEN SIZE: 1020 X 940 MM DISTANCE BETWEEN TIE BARS: 710 X 630 MM MOULD HEIGHT: 350... MM OPENING STORKE: 425 MM MAX.DAYLIGHT: 1200 MM GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 5,7 X 2,4 X 2,2 M WEIGHT: 12.000 KG EQUIPMENT: - 2 X CORE PULL ON MOVABLE WAP - 1 X CORE PULL ON FIXED WAP - 1 X PNEUMATIC VALVE
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-screw size: 62 mm<br/>injection shot weight in polysterol: unbkt. g/ps<br/>closing pressure: 330 kn<br/>volumn: 770 <br/>volt:  v<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> SCREW SIZE: 62 MM
INJECTION SHOT WEIGHT IN POLYSTEROL: UNBKT. G/PS
CLOSING PRESSURE: 330 KN
VOLUMN: 770
VOLT: V
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-machine specification

year: 2005 
control unit: unilog b4 

injection unit: .../1330
screw diameter: 55 mm 
injection pressure: 2041 bar 
injection volume: 653 ccm 
shot capacity: 594 g 

clamping unit: hm 270/...
clamping force: 270 t 
platen size: 1020 x 940 mm 
distance between tie bars: 710 x 630 mm 
mould height: 350... mm 
opening storke: 425 mm 
max.daylight: 1200 mm 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 5,7 x 2,4 x 2,2 m 
weight: 12.000 kg 

equipment:
- 2 x core pull on movable wap
- 1 x core pull on fixed wap
- 1 x pneumatic valve MACHINE SPECIFICATION YEAR: 2005 CONTROL UNIT: UNILOG B4 INJECTION UNIT: .../1330 SCREW DIAMETER: 55 MM INJECTION PRESSURE: 2041 BAR INJECTION VOLUME: 653 CCM SHOT CAPACITY: 594 G CLAMPING UNIT: HM 270/... CLAMPING FORCE: 270 T PLATEN SIZE: 1020 X 940 MM DISTANCE BETWEEN TIE BARS: 710 X 630 MM MOULD HEIGHT: 350... MM OPENING STORKE: 425 MM MAX.DAYLIGHT: 1200 MM GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 5,7 X 2,4 X 2,2 M WEIGHT: 12.000 KG EQUIPMENT: - 2 X CORE PULL ON MOVABLE WAP - 1 X CORE PULL ON FIXED WAP - 1 X PNEUMATIC VALVE
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-screw size: 72 mm<br/>injection shot weight in polysterol: unbkt. g/ps<br/>closing pressure: 330 kn<br/>volumn: 1040 <br/>volt:  v<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> SCREW SIZE: 72 MM
INJECTION SHOT WEIGHT IN POLYSTEROL: UNBKT. G/PS
CLOSING PRESSURE: 330 KN
VOLUMN: 1040
VOLT: V
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-machine specification

year: 2000 
control unit: unilog b2 

injection unit: .../210
screw diameter: 30 mm 
injection pressure: 2042 bar 
injection volume: 106 ccm 
shot capacity: 95 g 

clamping unit: 500/...
clamping force: 50 t 
platen size: 490 x 490 mm 
distance between tie bars: 320 x 320 mm 
mould height: 150... mm 
opening storke: 250 mm 
max.daylight: 600 mm 
ejector stroke: 100 mm 
cylinder heating power: 7,7 kw 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 3,1 x 0,95 x 1,5 m 
weight: 2500 kg 

equipment:
- interface as per euromap 12
- 1 x core pull
- 1 x pneumatic valve    MACHINE SPECIFICATION YEAR: 2000 CONTROL UNIT: UNILOG B2 INJECTION UNIT: .../210 SCREW DIAMETER: 30 MM INJECTION PRESSURE: 2042 BAR INJECTION VOLUME: 106 CCM SHOT CAPACITY: 95 G CLAMPING UNIT: 500/... CLAMPING FORCE: 50 T PLATEN SIZE: 490 X 490 MM DISTANCE BETWEEN TIE BARS: 320 X 320 MM MOULD HEIGHT: 150... MM OPENING STORKE: 250 MM MAX.DAYLIGHT: 600 MM EJECTOR STROKE: 100 MM CYLINDER HEATING POWER: 7,7 KW GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 3,1 X 0,95 X 1,5 M WEIGHT: 2500 KG EQUIPMENT: - INTERFACE AS PER EUROMAP 12 - 1 X CORE PULL - 1 X PNEUMATIC VALVE
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-screw size: 72 mm<br/>injection shot weight in polysterol: unbkt. g/ps<br/>closing pressure: 330 kn<br/>volumn: 1040 <br/>volt:  v<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> SCREW SIZE: 72 MM
INJECTION SHOT WEIGHT IN POLYSTEROL: UNBKT. G/PS
CLOSING PRESSURE: 330 KN
VOLUMN: 1040
VOLT: V
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-machine specification:

year: 2004 
robot: unirob -a-8-7+7-20 

injection unit: .../1900
screw diameter: 65 mm 
injection pressure: 1777 bar 
injection volume: 1078 ccm 
shot capacity: 981 g 

clamping unit: 3500/...
clamping force: 350 t 
platen size: 1010 x 1010 mm 
distance between tie bars: 710 x 710 mm 
mould height: 300...710 mm 
opening storke: 670 mm 
max.daylight: 1380 mm 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 7,60 x 1,80 x 2,40 m 
weight: 15.300 kg 

equipment:
- 1 x pneumatic valve
- 2 x core pull for closing plate  nw 10
- interface as per euromap 13
- increased oil cooler 
- regulated ejector
- screw extremely wear resistant and corrosion resistant
- interface for robot as per euromap 12
- including robot unirob -a-8-7+7-20 MACHINE SPECIFICATION: YEAR: 2004 ROBOT: UNIROB -A-8-7+7-20 INJECTION UNIT: .../1900 SCREW DIAMETER: 65 MM INJECTION PRESSURE: 1777 BAR INJECTION VOLUME: 1078 CCM SHOT CAPACITY: 981 G CLAMPING UNIT: 3500/... CLAMPING FORCE: 350 T PLATEN SIZE: 1010 X 1010 MM DISTANCE BETWEEN TIE BARS: 710 X 710 MM MOULD HEIGHT: 300...710 MM OPENING STORKE: 670 MM MAX.DAYLIGHT: 1380 MM GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 7,60 X 1,80 X 2,40 M WEIGHT: 15.300 KG EQUIPMENT: - 1 X PNEUMATIC VALVE - 2 X CORE PULL FOR CLOSING PLATE NW 10 - INTERFACE AS PER EUROMAP 13 - INCREASED OIL COOLER - REGULATED EJECTOR - SCREW EXTREMELY WEAR RESISTANT AND CORROSION RESISTANT - INTERFACE FOR ROBOT AS PER EUROMAP 12 - INCLUDING ROBOT UNIROB -A-8-7+7-20
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-screw size: 84 mm<br/>injection shot weight in polysterol: unbkt. g/ps<br/>closing pressure: 440 kn<br/>volumn: 1660 <br/>volt:  v<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> SCREW SIZE: 84 MM
INJECTION SHOT WEIGHT IN POLYSTEROL: UNBKT. G/PS
CLOSING PRESSURE: 440 KN
VOLUMN: 1660
VOLT: V
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Precio: 610.000 €
Ubicación: Land-ref. f 1101
mark andy p5
web with 17””=438,2 mm, year 2012, 11 colour  gew uv flexo chilled1x moveable screen stork, 1xmoveable dms hot stamping unit, 1xmoveable turn bar, 1xmoveable de/re lamination, cold foil with rewind and unwind, 1xsheeting unit roll/sheet, 2xwaste rewind, 3xrotary die cut unit, 1xcorona treatment, 1xbst web inspection, auto register system, surfaces from 15 microns pet to 300 g/m2, in production, price: 610 000 eur fca
 REF. F 1101 MARK ANDY P5 WEB WITH 17””=438,2 MM, YEAR 2012, 11 COLOUR GEW UV FLEXO CHILLED1X MOVEABLE SCREEN STORK, 1XMOVEABLE DMS HOT STAMPING UNIT, 1XMOVEABLE TURN BAR, 1XMOVEABLE DE/RE LAMINATION, COLD FOIL WITH REWIND AND UNWIND, 1XSHEETING UNIT ROLL/SHEET, 2XWASTE REWIND, 3XROTARY DIE CUT UNIT, 1XCORONA TREATMENT, 1XBST WEB INSPECTION, AUTO REGISTER SYSTEM, SURFACES FROM 15 MICRONS PET TO 300 G/M2, IN PRODUCTION, PRICE: 610 000 EUR FCA
Vendedor: TM Machinery
Año de construcción: usado
Ubicación: Land-screw size: 84 mm<br/>injection shot weight in polysterol: unbkt. g/ps<br/>closing pressure: 330 kn<br/>volumn: 1660 <br/>volt:  v<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> SCREW SIZE: 84 MM
INJECTION SHOT WEIGHT IN POLYSTEROL: UNBKT. G/PS
CLOSING PRESSURE: 330 KN
VOLUMN: 1660
VOLT: V
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-machine specification

year: 1993 
control unit: unilog 4000 b 

injection unit: .../50v-r
screw diameter: 25 mm 
injection pressure: 2149 bar 
injection volume: 58,9 ccm 
shot capacity: 53,6 g 

clamping unit: ba 230v/...
clamping force: 23 t 
platen size: 482 x 500 mm 
distance between tie bars: 304 x 254 mm 
mould height: 150 mm 
opening storke: 325 mm 
max.daylight: 475 mm 
ejector stroke: 100 mm 

general information:
delivery time: at short notice 
machine dimensions(m) lxwxh: 2,6 x 1,5 x 3,8 m 
weight: 1.800 kg 

equipment:
- machine number: vr23915315342
- operating hours: 30.856
- interface for ejector plates safety
- ?quality monitoring system
- needle valve nozzle
?- pneumatic valve for ejector MACHINE SPECIFICATION YEAR: 1993 CONTROL UNIT: UNILOG 4000 B INJECTION UNIT: .../50V-R SCREW DIAMETER: 25 MM INJECTION PRESSURE: 2149 BAR INJECTION VOLUME: 58,9 CCM SHOT CAPACITY: 53,6 G CLAMPING UNIT: BA 230V/... CLAMPING FORCE: 23 T PLATEN SIZE: 482 X 500 MM DISTANCE BETWEEN TIE BARS: 304 X 254 MM MOULD HEIGHT: 150 MM OPENING STORKE: 325 MM MAX.DAYLIGHT: 475 MM EJECTOR STROKE: 100 MM GENERAL INFORMATION: DELIVERY TIME: AT SHORT NOTICE MACHINE DIMENSIONS(M) LXWXH: 2,6 X 1,5 X 3,8 M WEIGHT: 1.800 KG EQUIPMENT: - MACHINE NUMBER: VR23915315342 - OPERATING HOURS: 30.856 - INTERFACE FOR EJECTOR PLATES SAFETY - ?QUALITY MONITORING SYSTEM - NEEDLE VALVE NOZZLE ?- PNEUMATIC VALVE FOR EJECTOR
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-screw size: 133 mm<br/>injection shot weight in polysterol: unbkt. g/ps<br/>closing pressure: 1200 kn<br/>volumn: 9030 <br/>volt:  v<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> SCREW SIZE: 133 MM
INJECTION SHOT WEIGHT IN POLYSTEROL: UNBKT. G/PS
CLOSING PRESSURE: 1200 KN
VOLUMN: 9030
VOLT: V
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-machine specification

year: 1999 
control unit: unilog 4000b 
robot: reis rl16 

injection unit: .../315 cdc
screw diameter: 40 mm 
injection pressure: 1575 bar 
injection volume: 201 ccm 
shot capacity: 182 g 

clamping unit: ba 1000/...
clamping force: 100 t 
platen size: 640 x 640 mm 
distance between tie bars: 420 x 420 mm 
mould height: 250... mm 
opening storke: 475 mm 
max.daylight: 725 mm 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 4,7 x 1,6 x 2,20 m 
weight: 4.600 kg 

equipment:
- 1 x core pulls
- 2 x pneumatic valve
- conveyor
- robot reis
- safety guard MACHINE SPECIFICATION YEAR: 1999 CONTROL UNIT: UNILOG 4000B ROBOT: REIS RL16 INJECTION UNIT: .../315 CDC SCREW DIAMETER: 40 MM INJECTION PRESSURE: 1575 BAR INJECTION VOLUME: 201 CCM SHOT CAPACITY: 182 G CLAMPING UNIT: BA 1000/... CLAMPING FORCE: 100 T PLATEN SIZE: 640 X 640 MM DISTANCE BETWEEN TIE BARS: 420 X 420 MM MOULD HEIGHT: 250... MM OPENING STORKE: 475 MM MAX.DAYLIGHT: 725 MM GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 4,7 X 1,6 X 2,20 M WEIGHT: 4.600 KG EQUIPMENT: - 1 X CORE PULLS - 2 X PNEUMATIC VALVE - CONVEYOR - ROBOT REIS - SAFETY GUARD
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-screw size: 98 mm<br/>injection shot weight in polysterol: unbkt. g/ps<br/>closing pressure: 550 kn<br/>volumn: 2640 <br/>volt:  v<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> SCREW SIZE: 98 MM
INJECTION SHOT WEIGHT IN POLYSTEROL: UNBKT. G/PS
CLOSING PRESSURE: 550 KN
VOLUMN: 2640
VOLT: V
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-machine specification

year: 1997 
control unit: selogica 
robot: arburg-3-achs-nc-handling 

injection unit: 150/...
screw diameter: 30 mm 
injection pressure: 1950 bar 
injection volume: 78 ccm 
shot capacity: 65 g 

clamping unit: .../500
clamping force: 50 t 
platen size: 405 x 405 mm 
distance between tie bars: 270 x 270 mm 
mould height: 200... mm 
opening storke: 350 mm 
max.daylight: 550 mm 
ejector stroke: 125 mm 
drive power of the hydraulic pump: 18,5 kw 
cylinder heating power: 4 x 1,2 kw 

general information:
screen text: german 
delivery time: now 
machine dimensions(m) lxwxh: 3,6 x 2 x 1,6 m 
weight: 2.400 kg 

equipment:
- incl. robot arburg-3-axies-nc-handling
- screw extremely wear resistant and corrosion resistant
- safety housing
- incl. conveyor belt
- 3 x pneumatic valve
- 2 x core pull  MACHINE SPECIFICATION YEAR: 1997 CONTROL UNIT: SELOGICA ROBOT: ARBURG-3-ACHS-NC-HANDLING INJECTION UNIT: 150/... SCREW DIAMETER: 30 MM INJECTION PRESSURE: 1950 BAR INJECTION VOLUME: 78 CCM SHOT CAPACITY: 65 G CLAMPING UNIT: .../500 CLAMPING FORCE: 50 T PLATEN SIZE: 405 X 405 MM DISTANCE BETWEEN TIE BARS: 270 X 270 MM MOULD HEIGHT: 200... MM OPENING STORKE: 350 MM MAX.DAYLIGHT: 550 MM EJECTOR STROKE: 125 MM DRIVE POWER OF THE HYDRAULIC PUMP: 18,5 KW CYLINDER HEATING POWER: 4 X 1,2 KW GENERAL INFORMATION: SCREEN TEXT: GERMAN DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 3,6 X 2 X 1,6 M WEIGHT: 2.400 KG EQUIPMENT: - INCL. ROBOT ARBURG-3-AXIES-NC-HANDLING - SCREW EXTREMELY WEAR RESISTANT AND CORROSION RESISTANT - SAFETY HOUSING - INCL. CONVEYOR BELT - 3 X PNEUMATIC VALVE - 2 X CORE PULL
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-screw size: 62 mm<br/>injection shot weight in polysterol: unbkt. g/ps<br/>closing pressure: 330 kn<br/>volumn: 620 <br/>volt:  v<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> SCREW SIZE: 62 MM
INJECTION SHOT WEIGHT IN POLYSTEROL: UNBKT. G/PS
CLOSING PRESSURE: 330 KN
VOLUMN: 620
VOLT: V
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-machine specification

year: 2004 
control unit: mc 4 

injection unit: .../220
screw diameter: 30 mm 
injection pressure: 2500 bar 
injection volume: 85 ccm 
shot capacity: 77 g 

clamping unit: km 80/...
clamping force: 80 t 
platen size: 610 x 610 mm 
distance between tie bars: 405 x 405 mm 
mould height: 350 ... mm 
opening storke: 500 mm 
max.daylight: 750 mm 
ejector stroke: 150 mm 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 4,0 x 1,4 x 1,9 m 
weight: 2.960 kg 

equipment:
- 2 x core pull
- 8 x hotrunner controller
- position-regulated screw
- 1 x pneumatic needle valve nozzle
- interface for dosing unit and robot  MACHINE SPECIFICATION YEAR: 2004 CONTROL UNIT: MC 4 INJECTION UNIT: .../220 SCREW DIAMETER: 30 MM INJECTION PRESSURE: 2500 BAR INJECTION VOLUME: 85 CCM SHOT CAPACITY: 77 G CLAMPING UNIT: KM 80/... CLAMPING FORCE: 80 T PLATEN SIZE: 610 X 610 MM DISTANCE BETWEEN TIE BARS: 405 X 405 MM MOULD HEIGHT: 350 ... MM OPENING STORKE: 500 MM MAX.DAYLIGHT: 750 MM EJECTOR STROKE: 150 MM GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 4,0 X 1,4 X 1,9 M WEIGHT: 2.960 KG EQUIPMENT: - 2 X CORE PULL - 8 X HOTRUNNER CONTROLLER - POSITION-REGULATED SCREW - 1 X PNEUMATIC NEEDLE VALVE NOZZLE - INTERFACE FOR DOSING UNIT AND ROBOT
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-screw size: 133 mm<br/>injection shot weight in polysterol: unbkt. g/ps<br/>closing pressure: 800 kn<br/>volumn: 6455 <br/>volt:  v<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> SCREW SIZE: 133 MM
INJECTION SHOT WEIGHT IN POLYSTEROL: UNBKT. G/PS
CLOSING PRESSURE: 800 KN
VOLUMN: 6455
VOLT: V
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-machine specification

year: 1998 
control unit: mc3f 

injection unit: .../390
screw diameter: 35 mm 
injection pressure: 2429 bar 
injection volume: 156 ccm 
shot capacity: 142 g 

clamping unit: km 125/...
clamping force: 125 t 
platen size: 745 x 770 mm 
distance between tie bars: 470 x 470 mm 
mould height: 300 mm 
opening storke: 600 mm 
max.daylight: 900 mm 
ejector stroke: 150 mm 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 4,3 x 1,6 x 2,2 m 
weight: 5.800 kg 

equipment:
- robot interface as per euromap 12
- 2 x core pull
- 2 x pneumatic valve
- accumulator  MACHINE SPECIFICATION YEAR: 1998 CONTROL UNIT: MC3F INJECTION UNIT: .../390 SCREW DIAMETER: 35 MM INJECTION PRESSURE: 2429 BAR INJECTION VOLUME: 156 CCM SHOT CAPACITY: 142 G CLAMPING UNIT: KM 125/... CLAMPING FORCE: 125 T PLATEN SIZE: 745 X 770 MM DISTANCE BETWEEN TIE BARS: 470 X 470 MM MOULD HEIGHT: 300 MM OPENING STORKE: 600 MM MAX.DAYLIGHT: 900 MM EJECTOR STROKE: 150 MM GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 4,3 X 1,6 X 2,2 M WEIGHT: 5.800 KG EQUIPMENT: - ROBOT INTERFACE AS PER EUROMAP 12 - 2 X CORE PULL - 2 X PNEUMATIC VALVE - ACCUMULATOR
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-screw size: 115 mm<br/>injection shot weight in polysterol: unbkt. g/ps<br/>closing pressure: 660 kn<br/>volumn: 4255 <br/>volt:  v<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> SCREW SIZE: 115 MM
INJECTION SHOT WEIGHT IN POLYSTEROL: UNBKT. G/PS
CLOSING PRESSURE: 660 KN
VOLUMN: 4255
VOLT: V
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-machine specification:

year: 1997 
control unit: mc3f 

injection unit: .../390
screw diameter: 40 mm 
injection pressure: 1860 bar 
injection volume: 204 ccm 
shot capacity: 185 g 

clamping unit: km 80/...
clamping force: 80 t 
platen size: 610 x 610 mm 
distance between tie bars: 405 x 405 mm 
mould height: 250 mm 
opening storke: 500 mm 
max.daylight: 750 mm 
ejector stroke: 150 mm 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 4,1 x 1,4 x 2,1 m 
weight: 3500 kg 

equipment:
- robot interface as per euromap 12
- 2 x core pull
- 1 x pneumatic valve   MACHINE SPECIFICATION: YEAR: 1997 CONTROL UNIT: MC3F INJECTION UNIT: .../390 SCREW DIAMETER: 40 MM INJECTION PRESSURE: 1860 BAR INJECTION VOLUME: 204 CCM SHOT CAPACITY: 185 G CLAMPING UNIT: KM 80/... CLAMPING FORCE: 80 T PLATEN SIZE: 610 X 610 MM DISTANCE BETWEEN TIE BARS: 405 X 405 MM MOULD HEIGHT: 250 MM OPENING STORKE: 500 MM MAX.DAYLIGHT: 750 MM EJECTOR STROKE: 150 MM GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 4,1 X 1,4 X 2,1 M WEIGHT: 3500 KG EQUIPMENT: - ROBOT INTERFACE AS PER EUROMAP 12 - 2 X CORE PULL - 1 X PNEUMATIC VALVE
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-screw size: 133 mm<br/>injection shot weight in polysterol: unbkt. g/ps<br/>closing pressure: 800 kn<br/>volumn: 6455 <br/>volt:  v<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> SCREW SIZE: 133 MM
INJECTION SHOT WEIGHT IN POLYSTEROL: UNBKT. G/PS
CLOSING PRESSURE: 800 KN
VOLUMN: 6455
VOLT: V
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-machine specification


year: 2006 
control unit: mc4 

injection unit: .../2700
screw diameter: 70 mm 
injection pressure: 2389 bar 
injection volume: 1097 ccm 
shot capacity: 998 g 

clamping unit: 320/...
clamping force: 320 t 
platen size: 1060 x 1095 mm 
distance between tie bars: 710 x 710 mm 
mould height: 380... mm 
opening storke: 920 mm 
max.daylight: 1300 mm 
ejector stroke: 250 mm 
drive power of the hydraulic pump: 75 kw 
cylinder heating power: 47 kw 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 7,3 x 2,1 x 2,5 m 
weight: 17000 kg 

equipment:
- 2 x pneumatic valve
- 3 x core pull
- ?screw drive by three phase motor
?- robot interface as per euromap 67 MACHINE SPECIFICATION YEAR: 2006 CONTROL UNIT: MC4 INJECTION UNIT: .../2700 SCREW DIAMETER: 70 MM INJECTION PRESSURE: 2389 BAR INJECTION VOLUME: 1097 CCM SHOT CAPACITY: 998 G CLAMPING UNIT: 320/... CLAMPING FORCE: 320 T PLATEN SIZE: 1060 X 1095 MM DISTANCE BETWEEN TIE BARS: 710 X 710 MM MOULD HEIGHT: 380... MM OPENING STORKE: 920 MM MAX.DAYLIGHT: 1300 MM EJECTOR STROKE: 250 MM DRIVE POWER OF THE HYDRAULIC PUMP: 75 KW CYLINDER HEATING POWER: 47 KW GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 7,3 X 2,1 X 2,5 M WEIGHT: 17000 KG EQUIPMENT: - 2 X PNEUMATIC VALVE - 3 X CORE PULL - ?SCREW DRIVE BY THREE PHASE MOTOR ?- ROBOT INTERFACE AS PER EUROMAP 67
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-screw size: 98 mm<br/>injection shot weight in polysterol: unbkt. g/ps<br/>closing pressure: 8600 kn<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> SCREW SIZE: 98 MM
INJECTION SHOT WEIGHT IN POLYSTEROL: UNBKT. G/PS
CLOSING PRESSURE: 8600 KN
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-machine specification

year: 1999 
control unit: mc4 

injection unit: .../55
screw diameter: 18 mm 
injection pressure: 2400 bar 
injection volume: 22,9 ccm 
shot capacity: 20,8 g 

clamping unit: km 40/...
clamping force: 40 t 
platen size: 540 x 540 mm 
distance between tie bars: 321 x 321 mm 
mould height: 200... mm 
opening storke: 350 mm 
max.daylight: 550 mm 
ejector stroke: 100 mm 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 3,2 x 1,3 x 1,8 m 
weight: 2.300 kg 

equipment:
- robot interface as per euromap 12
- 1 x core pull
- 1 x pneumatic valve 
- needle valve nozzle MACHINE SPECIFICATION YEAR: 1999 CONTROL UNIT: MC4 INJECTION UNIT: .../55 SCREW DIAMETER: 18 MM INJECTION PRESSURE: 2400 BAR INJECTION VOLUME: 22,9 CCM SHOT CAPACITY: 20,8 G CLAMPING UNIT: KM 40/... CLAMPING FORCE: 40 T PLATEN SIZE: 540 X 540 MM DISTANCE BETWEEN TIE BARS: 321 X 321 MM MOULD HEIGHT: 200... MM OPENING STORKE: 350 MM MAX.DAYLIGHT: 550 MM EJECTOR STROKE: 100 MM GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 3,2 X 1,3 X 1,8 M WEIGHT: 2.300 KG EQUIPMENT: - ROBOT INTERFACE AS PER EUROMAP 12 - 1 X CORE PULL - 1 X PNEUMATIC VALVE - NEEDLE VALVE NOZZLE
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-screw size: 115 mm<br/>injection shot weight in polysterol: unbkt. g/ps<br/>closing pressure: 660 kn<br/>volumn: 4255 <br/>volt:  v<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> SCREW SIZE: 115 MM
INJECTION SHOT WEIGHT IN POLYSTEROL: UNBKT. G/PS
CLOSING PRESSURE: 660 KN
VOLUMN: 4255
VOLT: V
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-machine specification

year: 2000 
control unit: unilog b4 

injection unit: .../500
screw diameter: 40 mm 
injection pressure: 2164 bar 
injection volume: 226 ccm 
shot capacity: 206 g 

clamping unit: 1000/...
clamping force: 100 t 
platen size: 640 x 640 mm 
distance between tie bars: 420 x 420 mm 
mould height: 250... mm 
opening storke: 475 mm 
max.daylight: 725 mm 
ejector stroke: 150 mm 
cylinder heating power: 11,2 kw 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 4 x 1,3 x 1,8 m 
weight: 4700 kg 

equipment:
- 1 x core pull
- 1 x pneumatic valve 
- quality assurance
- closed loop control for injection unit MACHINE SPECIFICATION YEAR: 2000 CONTROL UNIT: UNILOG B4 INJECTION UNIT: .../500 SCREW DIAMETER: 40 MM INJECTION PRESSURE: 2164 BAR INJECTION VOLUME: 226 CCM SHOT CAPACITY: 206 G CLAMPING UNIT: 1000/... CLAMPING FORCE: 100 T PLATEN SIZE: 640 X 640 MM DISTANCE BETWEEN TIE BARS: 420 X 420 MM MOULD HEIGHT: 250... MM OPENING STORKE: 475 MM MAX.DAYLIGHT: 725 MM EJECTOR STROKE: 150 MM CYLINDER HEATING POWER: 11,2 KW GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 4 X 1,3 X 1,8 M WEIGHT: 4700 KG EQUIPMENT: - 1 X CORE PULL - 1 X PNEUMATIC VALVE - QUALITY ASSURANCE - CLOSED LOOP CONTROL FOR INJECTION UNIT
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-screw size: 133 mm<br/>injection shot weight in polysterol: unbkt. g/ps<br/>closing pressure: 1200 kn<br/>volumn: 9030 <br/>volt:  v<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> SCREW SIZE: 133 MM
INJECTION SHOT WEIGHT IN POLYSTEROL: UNBKT. G/PS
CLOSING PRESSURE: 1200 KN
VOLUMN: 9030
VOLT: V
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-stork rotary printing. year 1991
model rdiv-1850/20-20/2ddit
working width 1.800 mm
12 colors

- non-stop entrance suitable for knits with conveyor belt
- brush box cleaning device
- thermoplast fabric preheating device
- gas heated dryer with 3 passages in 2 chambers
- exit by folder

machine still connected in working condition STORK ROTARY PRINTING. YEAR 1991 MODEL RDIV-1850/20-20/2DDIT WORKING WIDTH 1.800 MM 12 COLORS - NON-STOP ENTRANCE SUITABLE FOR KNITS WITH CONVEYOR BELT - BRUSH BOX CLEANING DEVICE - THERMOPLAST FABRIC PREHEATING DEVICE - GAS HEATED DRYER WITH 3 PASSAGES IN 2 CHAMBERS - EXIT BY FOLDER MACHINE STILL CONNECTED IN WORKING CONDITION
Vendedor: Inautex
Año de construcción: usado
Ubicación: Land-screw size: 115 mm<br/>injection shot weight in polysterol: unbkt. g/ps<br/>closing pressure: 660 kn<br/>volumn: 4255 <br/>volt:  v<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> SCREW SIZE: 115 MM
INJECTION SHOT WEIGHT IN POLYSTEROL: UNBKT. G/PS
CLOSING PRESSURE: 660 KN
VOLUMN: 4255
VOLT: V
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-for sale... complete engine stork wartsila diesel 6sw 280 





to whom it may concern;

we ve complete engine stork wartsila 6sw 280 at our stock

pls find engine spec at below

model 280 6sw
year of built 1999
number 13098
power 1470kw
rpm 750
made in the netherland

engine ready to transport ex stock.

besides we ve also many major parts of this engine

cylinder heads / pistons / con rods etc ..

if you've any further questions pls dont  hesitate to contact with us.

capt. ayhan ugurluba
 
best of regards;
 
aliaga marine services
e mail: info/aliagamarine.com
phn/fax: +90 232 618 03 90
mobile: + 905556084850
aliagamarine.com
turkey

  FOR SALE... COMPLETE ENGINE STORK WARTSILA DIESEL 6SW 280 TO WHOM IT MAY CONCERN; WE VE COMPLETE ENGINE STORK WARTSILA 6SW 280 AT OUR STOCK PLS FIND ENGINE SPEC AT BELOW MODEL 280 6SW YEAR OF BUILT 1999 NUMBER 13098 POWER 1470KW RPM 750 MADE IN THE NETHERLAND ENGINE READY TO TRANSPORT EX STOCK. BESIDES WE VE ALSO MANY MAJOR PARTS OF THIS ENGINE CYLINDER HEADS / PISTONS / CON RODS ETC .. IF YOU'VE ANY FURTHER QUESTIONS PLS DONT HESITATE TO CONTACT WITH US. CAPT. AYHAN UGURLUBA BEST OF REGARDS; ALIAGA MARINE SERVICES E MAIL: INFO/ALIAGAMARINE.COM PHN/FAX: +90 232 618 03 90 MOBILE: + 905556084850 ALIAGAMARINE.COM TURKEY
Vendedor: ALIAGA MARINE SERVICES
Año de construcción: usado
Ubicación: Land-screw size: 72 mm<br/>injection shot weight in polysterol: unbkt. g/ps<br/>closing pressure: 440 kn<br/>volumn: 1040 <br/>volt:  v<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> SCREW SIZE: 72 MM
INJECTION SHOT WEIGHT IN POLYSTEROL: UNBKT. G/PS
CLOSING PRESSURE: 440 KN
VOLUMN: 1040
VOLT: V
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Precio: 22.000 €
Ubicación: Land-used stork monoblock. 32 spill heads and 8 screw heads. adjusting the dose on the pistons. dimensions length 3.25 m, width 2.3 m, height 2.7 m the machine is adapted to bottling kefir in pet bottles 400 and 500ml. USED STORK MONOBLOCK. 32 SPILL HEADS AND 8 SCREW HEADS. ADJUSTING THE DOSE ON THE PISTONS. DIMENSIONS LENGTH 3.25 M, WIDTH 2.3 M, HEIGHT 2.7 M THE MACHINE IS ADAPTED TO BOTTLING KEFIR IN PET BOTTLES 400 AND 500ML.
Vendedor: Industrio Service
Año de construcción: usado
Ubicación: Land-screw size: 115 mm<br/>injection shot weight in polysterol: unbkt. g/ps<br/>closing pressure: 800 kn<br/>volumn: 4255 <br/>volt:  v<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> SCREW SIZE: 115 MM
INJECTION SHOT WEIGHT IN POLYSTEROL: UNBKT. G/PS
CLOSING PRESSURE: 800 KN
VOLUMN: 4255
VOLT: V
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)