82 ofertas

Año de construcción: usado
Ubicación: Land-diesel generator power plant 119 mw with wartsila 7x18v46 hfo

this 119 mw power plant (iso condition) was delivered by wartsila in year 2002, operation started in 2003 and it has 7 x 18v46 diesel engines running on heavy fuel oil (hfo) at 500 rpm coupled with abb made brushless synchronous 11 kv / 50 hz alternators. i has been in operated under ppa and engines have been operated around 60 000 hours in base load power production. this power plant is designed and build by wartsila utilizing their highly standardized functional module delivery. operation and maintenance works were carried out strictly in accordance with wartsila manuals. the plant was professionally dismantled in 2017 and before dismantling 60 000 hour major overhauled was carried out to all engines. during the operation no any unexpected breakdowns has happened. delivery contains complete functioning power plant equipment with 110 kv switchyard equipment. buildings and tanks can be discussed but are not a part of our standard offering.

main plant characteristics at current site conditions:

power output iso from alternators: 119 mw at 110 kv / 50 hz
engines: 7 x 18v46 - 500 rpm
alternators: abb amg 1600 ss12 dseb self-cooled, brushless, synchronous
power factor: 0.8
efficiency: 0.97 (at rated output, 50 hz and power factor 0.8)
voltage: 11 000 v, with adjustment range +5 - 10%
frequency: 50 hz +/-5%
fuel consumption gross: 8290 - 8330 kj/kwh (43.4 to 43.2 % efficiency)
lube oil consumption: 0.7 g/kwh
cooling system: closed loop radiator cooling
fuel oil: hfo viscosity max 380 cst / 50 °c   DIESEL GENERATOR POWER PLANT 119 MW WITH WARTSILA 7X18V46 HFO THIS 119 MW POWER PLANT (ISO CONDITION) WAS DELIVERED BY WARTSILA IN YEAR 2002, OPERATION STARTED IN 2003 AND IT HAS 7 X 18V46 DIESEL ENGINES RUNNING ON HEAVY FUEL OIL (HFO) AT 500 RPM COUPLED WITH ABB MADE BRUSHLESS SYNCHRONOUS 11 KV / 50 HZ ALTERNATORS. I HAS BEEN IN OPERATED UNDER PPA AND ENGINES HAVE BEEN OPERATED AROUND 60 000 HOURS IN BASE LOAD POWER PRODUCTION. THIS POWER PLANT IS DESIGNED AND BUILD BY WARTSILA UTILIZING THEIR HIGHLY STANDARDIZED FUNCTIONAL MODULE DELIVERY. OPERATION AND MAINTENANCE WORKS WERE CARRIED OUT STRICTLY IN ACCORDANCE WITH WARTSILA MANUALS. THE PLANT WAS PROFESSIONALLY DISMANTLED IN 2017 AND BEFORE DISMANTLING 60 000 HOUR MAJOR OVERHAULED WAS CARRIED OUT TO ALL ENGINES. DURING THE OPERATION NO ANY UNEXPECTED BREAKDOWNS HAS HAPPENED. DELIVERY CONTAINS COMPLETE FUNCTIONING POWER PLANT EQUIPMENT WITH 110 KV SWITCHYARD EQUIPMENT. BUILDINGS AND TANKS CAN BE DISCUSSED BUT ARE NOT A PART OF OUR STANDARD OFFERING. MAIN PLANT CHARACTERISTICS AT CURRENT SITE CONDITIONS: POWER OUTPUT ISO FROM ALTERNATORS: 119 MW AT 110 KV / 50 HZ ENGINES: 7 X 18V46 - 500 RPM ALTERNATORS: ABB AMG 1600 SS12 DSEB SELF-COOLED, BRUSHLESS, SYNCHRONOUS POWER FACTOR: 0.8 EFFICIENCY: 0.97 (AT RATED OUTPUT, 50 HZ AND POWER FACTOR 0.8) VOLTAGE: 11 000 V, WITH ADJUSTMENT RANGE +5 - 10% FREQUENCY: 50 HZ +/-5% FUEL CONSUMPTION GROSS: 8290 - 8330 KJ/KWH (43.4 TO 43.2 % EFFICIENCY) LUBE OIL CONSUMPTION: 0.7 G/KWH COOLING SYSTEM: CLOSED LOOP RADIATOR COOLING FUEL OIL: HFO VISCOSITY MAX 380 CST / 50 °C
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec shrink wrapper sideshrink w60-xxl pro-version<br><br>pro-version automatic side sealer, suitable for products without any length restriction. ideal to be combined with amtec shrinktunnel pof-xl (high speed ) pro-version. touch screen for control and setting, easy to operate. easy film reloading near floor. optional available: stacker sytems for shrink wrapped panels. <br><br>- specifications: max. speed of the machine in neutral: 60 cycles/minute | max. package size: l(200-unlimited)xw(150-660)xh(2-120) | sealing blade width: 800mm | 380v/5.0kw | 6bar | machine dimensions: l2240xw2145xh1490mm.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SHRINK WRAPPER SIDESHRINK W60-XXL PRO-VERSION

PRO-VERSION AUTOMATIC SIDE SEALER, SUITABLE FOR PRODUCTS WITHOUT ANY LENGTH RESTRICTION. IDEAL TO BE COMBINED WITH AMTEC SHRINKTUNNEL POF-XL (HIGH SPEED ) PRO-VERSION. TOUCH SCREEN FOR CONTROL AND SETTING, EASY TO OPERATE. EASY FILM RELOADING NEAR FLOOR. OPTIONAL AVAILABLE: STACKER SYTEMS FOR SHRINK WRAPPED PANELS.

- SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 60 CYCLES/MINUTE | MAX. PACKAGE SIZE: L(200-UNLIMITED)XW(150-660)XH(2-120) | SEALING BLADE WIDTH: 800MM | 380V/5.0KW | 6BAR | MACHINE DIMENSIONS: L2240XW2145XH1490MM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-diesel generator power plant 106 mw with wartsila 7x18v46 hfo
 
this 106 mw power plant was delivered by wartsila in year 2000, operation started in 2001 and it has 7 x 18v46 diesel engines running on heavy fuel oil (hfo) at 500 rpm coupled with abb made brushless synchronous 11 kv / 50 hz alternators. i has been in operated under ppa and engines have been operated from 50700 to 69000 hours in base load power production this power plant is designed and build by wartsila utilizing their highly standardized functional module delivery. operation and maintenance works are carried out strictly in accordance with wartsila manuals, 60 000 hour maintenance is carried out to 3 units. no any unexpected breakdowns has happened. delivery contains complete functioning power plant with 110 kv switchyard, buildings and day tank yard. power plant is currently in standby mode, in excellent condition it has all service records and complete original documentation available at site.
 
main plant characteristics at current site conditions:
 
net power output at site: 106 mw at 110 kv / 50 hz
engines: 7 x 18v46 - 500 rpm
shaft output: iso 16 290 kwm
alternators: abb amg 1600 ss12 dseb self-cooled, brushless, synchronous
power factor: 0.8
efficiency: 0.97 (at rated output, 50 hz and power factor 0.8)
voltage: 11 000 v, with adjustment range +5 - 10%
frequency: 50 hz +/-5%
 
fuel consumption gross: 8290 - 8330 kj/kwh (43.4 to 43.2 % efficiency)
lube oil consumption: 0.7 g/kwh
cooling system: closed loop radiator cooling
fuel oil: hfo viscosity max 380 cst / 50 °c
internal electric consump: 2.5 % at full load, up to 4% at low load   DIESEL GENERATOR POWER PLANT 106 MW WITH WARTSILA 7X18V46 HFO THIS 106 MW POWER PLANT WAS DELIVERED BY WARTSILA IN YEAR 2000, OPERATION STARTED IN 2001 AND IT HAS 7 X 18V46 DIESEL ENGINES RUNNING ON HEAVY FUEL OIL (HFO) AT 500 RPM COUPLED WITH ABB MADE BRUSHLESS SYNCHRONOUS 11 KV / 50 HZ ALTERNATORS. I HAS BEEN IN OPERATED UNDER PPA AND ENGINES HAVE BEEN OPERATED FROM 50700 TO 69000 HOURS IN BASE LOAD POWER PRODUCTION THIS POWER PLANT IS DESIGNED AND BUILD BY WARTSILA UTILIZING THEIR HIGHLY STANDARDIZED FUNCTIONAL MODULE DELIVERY. OPERATION AND MAINTENANCE WORKS ARE CARRIED OUT STRICTLY IN ACCORDANCE WITH WARTSILA MANUALS, 60 000 HOUR MAINTENANCE IS CARRIED OUT TO 3 UNITS. NO ANY UNEXPECTED BREAKDOWNS HAS HAPPENED. DELIVERY CONTAINS COMPLETE FUNCTIONING POWER PLANT WITH 110 KV SWITCHYARD, BUILDINGS AND DAY TANK YARD. POWER PLANT IS CURRENTLY IN STANDBY MODE, IN EXCELLENT CONDITION IT HAS ALL SERVICE RECORDS AND COMPLETE ORIGINAL DOCUMENTATION AVAILABLE AT SITE. MAIN PLANT CHARACTERISTICS AT CURRENT SITE CONDITIONS: NET POWER OUTPUT AT SITE: 106 MW AT 110 KV / 50 HZ ENGINES: 7 X 18V46 - 500 RPM SHAFT OUTPUT: ISO 16 290 KWM ALTERNATORS: ABB AMG 1600 SS12 DSEB SELF-COOLED, BRUSHLESS, SYNCHRONOUS POWER FACTOR: 0.8 EFFICIENCY: 0.97 (AT RATED OUTPUT, 50 HZ AND POWER FACTOR 0.8) VOLTAGE: 11 000 V, WITH ADJUSTMENT RANGE +5 - 10% FREQUENCY: 50 HZ +/-5% FUEL CONSUMPTION GROSS: 8290 - 8330 KJ/KWH (43.4 TO 43.2 % EFFICIENCY) LUBE OIL CONSUMPTION: 0.7 G/KWH COOLING SYSTEM: CLOSED LOOP RADIATOR COOLING FUEL OIL: HFO VISCOSITY MAX 380 CST / 50 °C INTERNAL ELECTRIC CONSUMP: 2.5 % AT FULL LOAD, UP TO 4% AT LOW LOAD
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec shrink wrapper sideshrink w60-xxxl pro-version for extra large/wide products<br><br>pro-version automatic side sealer, suitable for extra large/wide products without any length restriction. ideal to be combined with amtec shrinktunnel pof-xxxl (high speed ) pro-version. touch screen for control and setting, easy to operate. easy film reloading near floor. optional available: stacker sytems for shrink wrapped panels. <br><br>- specifications: max. speed of the machine in neutral: 60 cycles/minute | max. package size: l(300-unlimited)xw(200-1020)xh(10-120) | sealing blade width: 1140mm | 380v/4.0kw | 0.55m³, 6bar | machine dimensions: l2530xw2765xh1490mm.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SHRINK WRAPPER SIDESHRINK W60-XXXL PRO-VERSION FOR EXTRA LARGE/WIDE PRODUCTS

PRO-VERSION AUTOMATIC SIDE SEALER, SUITABLE FOR EXTRA LARGE/WIDE PRODUCTS WITHOUT ANY LENGTH RESTRICTION. IDEAL TO BE COMBINED WITH AMTEC SHRINKTUNNEL POF-XXXL (HIGH SPEED ) PRO-VERSION. TOUCH SCREEN FOR CONTROL AND SETTING, EASY TO OPERATE. EASY FILM RELOADING NEAR FLOOR. OPTIONAL AVAILABLE: STACKER SYTEMS FOR SHRINK WRAPPED PANELS.

- SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 60 CYCLES/MINUTE | MAX. PACKAGE SIZE: L(300-UNLIMITED)XW(200-1020)XH(10-120) | SEALING BLADE WIDTH: 1140MM | 380V/4.0KW | 0.55M³, 6BAR | MACHINE DIMENSIONS: L2530XW2765XH1490MM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-complete pet stretch blow station with blomax 16 serie iii

manufacturer sig corpoplast
manufacturer's type blomax 16, series iii
made in year 2005
capacity 22 000 bph
application stretch blow molding machine
neck standard pco 1880 - 28 mm
condition used - very good
container size (suitable)from 0.5 to 2.5 liters
air compressor atelier francois ce 68a
discharge air pressure 40 bar
fad 35 m3/h
preform feeding station simonazzi

this blomax 16, series iii, pet bottle blowing system is in excellent condition and includes preform feeding system, chiller and atelier francois 40 bar air compressor. it is commissioned on 2005 and it is still installed and can be tested. it has been regularly serviced strict in accordance with the manufacturer's guidelines. this is complete system for pet bottle blowing at capacity 22 000 bph, it has been making 1.5 liter and 2.5 liter bottles but it is suitable for bottles from 0.5 liters and 2.0 liters. it has currently neck standard pco 1880 - 28 mm   COMPLETE PET STRETCH BLOW STATION WITH BLOMAX 16 SERIE III MANUFACTURER SIG CORPOPLAST MANUFACTURER'S TYPE BLOMAX 16, SERIES III MADE IN YEAR 2005 CAPACITY 22 000 BPH APPLICATION STRETCH BLOW MOLDING MACHINE NECK STANDARD PCO 1880 - 28 MM CONDITION USED - VERY GOOD CONTAINER SIZE (SUITABLE)FROM 0.5 TO 2.5 LITERS AIR COMPRESSOR ATELIER FRANCOIS CE 68A DISCHARGE AIR PRESSURE 40 BAR FAD 35 M3/H PREFORM FEEDING STATION SIMONAZZI THIS BLOMAX 16, SERIES III, PET BOTTLE BLOWING SYSTEM IS IN EXCELLENT CONDITION AND INCLUDES PREFORM FEEDING SYSTEM, CHILLER AND ATELIER FRANCOIS 40 BAR AIR COMPRESSOR. IT IS COMMISSIONED ON 2005 AND IT IS STILL INSTALLED AND CAN BE TESTED. IT HAS BEEN REGULARLY SERVICED STRICT IN ACCORDANCE WITH THE MANUFACTURER'S GUIDELINES. THIS IS COMPLETE SYSTEM FOR PET BOTTLE BLOWING AT CAPACITY 22 000 BPH, IT HAS BEEN MAKING 1.5 LITER AND 2.5 LITER BOTTLES BUT IT IS SUITABLE FOR BOTTLES FROM 0.5 LITERS AND 2.0 LITERS. IT HAS CURRENTLY NECK STANDARD PCO 1880 - 28 MM
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec shrink wrapper sideshrink w60-xl pro-version<br><br>pro-version automatic side sealer, suitable for products without any length restriction. ideal to be combined with amtec shrinktunel pof-l (high speed ) pro-version. touch screen for control and setting, easy to operate. easy film reloading near floor. optional available: stacker sytems for shrink wrapped panels, etc. <br><br>- specifications: max. speed of the machine in neutral: 60 cycles/minute | max. package size: l(50-unlimited)xw(50-420)xh(2-120) | sealing blade width: 530mm | 220v/3.5kw | 6bar | machine dimensions: l1820xw1605xh1330mm.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SHRINK WRAPPER SIDESHRINK W60-XL PRO-VERSION

PRO-VERSION AUTOMATIC SIDE SEALER, SUITABLE FOR PRODUCTS WITHOUT ANY LENGTH RESTRICTION. IDEAL TO BE COMBINED WITH AMTEC SHRINKTUNEL POF-L (HIGH SPEED ) PRO-VERSION. TOUCH SCREEN FOR CONTROL AND SETTING, EASY TO OPERATE. EASY FILM RELOADING NEAR FLOOR. OPTIONAL AVAILABLE: STACKER SYTEMS FOR SHRINK WRAPPED PANELS, ETC.

- SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 60 CYCLES/MINUTE | MAX. PACKAGE SIZE: L(50-UNLIMITED)XW(50-420)XH(2-120) | SEALING BLADE WIDTH: 530MM | 220V/3.5KW | 6BAR | MACHINE DIMENSIONS: L1820XW1605XH1330MM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-we are pleased to offer, 

irs 330 
the irs stand-alone converting machine is equipped for the 
production of label stacks in various materials like iml, paper, 
carton, film etc. from a pre-printed reel. next, to that the irs is 
designed to produce small reels from a pre-printed mother reel by 
means of longitudinal cutting of self-adhesives, foil- and paper 
materials. 
thanks to the servo driven die-cutting station and a special control 
system the machine is able to provide an in register die cut 
production 
irs330 machine with a die-cutting unit and non-stop 
stacker 
technical data 
maximum web width: 330 mm 
maximum mechanical speed for irs330: up to 200 
(used as rewinding machine - without stacker unit): m/min 
maximum mechanical speed during in-register dies cutting process for stable materials: 100/min 
maximum unwind diameter: 750 mm 
electric power supply: 3x400v 
compressed air (dry, without oil) 6 bar m3/h 
machine dimension 
length: 4360 
width: 1580 

pneumatic unwind spindle, cantilever type 76 mm 
de-curl-bar-unit with roller 
web guide bst splice table with 2 pneumatic clamps 
matrix rewind spindle is driven by a servo drive 
maximum rewind diameter-matrix 500 mm 
rewind spindle-diameter 76 mm 
flag detector czujnik flag 
crus cut unit with 2 razor blades 
pneumatic nip roller device 
matrix nip roller unit 
dancer roller for tension matrix 
material support plate equipped with anti-static bars (total in the machine 3 pcs) 

die cutting station (including matrix rewinder) 
330 mm 96 t-192t 
maximum working width of a magnetic cylinder (flexor type) 330 mm 96 t-192t 

die-cutting cylinder driven by a servo drive 
modified pressure bridge allowing to lift the magnetic die cylinder without hoist to mount the magnetic die plate. 

control system for off-line in register die cutting 
do 100 m/min 
maximum machine speed during in-register die-cutting 
process for stable materials 100 m/min 

hydraulic pressure read out - 2 clocks 

vacuum belt 

control panel on movable arm equipped with: 
micro-processor control system 
electronic counter (labels/meters) 
precise adjustment of rewind and unwind web tension 
electronic correction of web tension on unwind 
automatic stop at roll end 

rewind unit equipped with	
1 pneumatic rewind spindle r (servo driven) 76 mm 
maximum rewind diameter /440 mm 
lay on roller 
simple change of winding direction 
simple change of spindle diameter 

2 rewind shaft with pneumatic spindle diameter 
serwo driven 76mm 
maximum rewind diameter (for 2 spindles) 310mm 
simple change of winding direction 
simple change of spindle diameter 

counting photo cell 
non-stop stacker unit 
to produce automatically ready stacks with a max. height of 
150mm. the ready stacks are delivered by means of a 
pushing system. 
the restriction is a min. label size of 7cm. 
for smaller labels, 3,5cm – 7cm, the stack has to be taken 
out by the 45° pins manually. 
max. label size depending on working width of magnetic 
cylinder. 
stack unit for 4 streams (max) 

delivery conveyor stacker non -stop see the drawing 
delivery conveyor table, including vacuum-belt (12) and 
vacuum-pump (max. 4 streams across) 

conveyor motor 
stop wheels 
vacuum motor 
separation o-belts 
stack table motor 
automatic out-feed pusher 
stack table 
joggers 
transport belts 
collection table for take off –the stacks 
shear cutting unit with 3 knives 
control panel for stacker panel 
antistatic bars (total in the machine 3 pcs) 
power unit for antistatic bars 
machine is in production 
located in england   WE ARE PLEASED TO OFFER, IRS 330 THE IRS STAND-ALONE CONVERTING MACHINE IS EQUIPPED FOR THE PRODUCTION OF LABEL STACKS IN VARIOUS MATERIALS LIKE IML, PAPER, CARTON, FILM ETC. FROM A PRE-PRINTED REEL. NEXT, TO THAT THE IRS IS DESIGNED TO PRODUCE SMALL REELS FROM A PRE-PRINTED MOTHER REEL BY MEANS OF LONGITUDINAL CUTTING OF SELF-ADHESIVES, FOIL- AND PAPER MATERIALS. THANKS TO THE SERVO DRIVEN DIE-CUTTING STATION AND A SPECIAL CONTROL SYSTEM THE MACHINE IS ABLE TO PROVIDE AN IN REGISTER DIE CUT PRODUCTION IRS330 MACHINE WITH A DIE-CUTTING UNIT AND NON-STOP STACKER TECHNICAL DATA MAXIMUM WEB WIDTH: 330 MM MAXIMUM MECHANICAL SPEED FOR IRS330: UP TO 200 (USED AS REWINDING MACHINE - WITHOUT STACKER UNIT): M/MIN MAXIMUM MECHANICAL SPEED DURING IN-REGISTER DIES CUTTING PROCESS FOR STABLE MATERIALS: 100/MIN MAXIMUM UNWIND DIAMETER: 750 MM ELECTRIC POWER SUPPLY: 3X400V COMPRESSED AIR (DRY, WITHOUT OIL) 6 BAR M3/H MACHINE DIMENSION LENGTH: 4360 WIDTH: 1580 PNEUMATIC UNWIND SPINDLE, CANTILEVER TYPE 76 MM DE-CURL-BAR-UNIT WITH ROLLER WEB GUIDE BST SPLICE TABLE WITH 2 PNEUMATIC CLAMPS MATRIX REWIND SPINDLE IS DRIVEN BY A SERVO DRIVE MAXIMUM REWIND DIAMETER-MATRIX 500 MM REWIND SPINDLE-DIAMETER 76 MM FLAG DETECTOR CZUJNIK FLAG CRUS CUT UNIT WITH 2 RAZOR BLADES PNEUMATIC NIP ROLLER DEVICE MATRIX NIP ROLLER UNIT DANCER ROLLER FOR TENSION MATRIX MATERIAL SUPPORT PLATE EQUIPPED WITH ANTI-STATIC BARS (TOTAL IN THE MACHINE 3 PCS) DIE CUTTING STATION (INCLUDING MATRIX REWINDER) 330 MM 96 T-192T MAXIMUM WORKING WIDTH OF A MAGNETIC CYLINDER (FLEXOR TYPE) 330 MM 96 T-192T DIE-CUTTING CYLINDER DRIVEN BY A SERVO DRIVE MODIFIED PRESSURE BRIDGE ALLOWING TO LIFT THE MAGNETIC DIE CYLINDER WITHOUT HOIST TO MOUNT THE MAGNETIC DIE PLATE. CONTROL SYSTEM FOR OFF-LINE IN REGISTER DIE CUTTING DO 100 M/MIN MAXIMUM MACHINE SPEED DURING IN-REGISTER DIE-CUTTING PROCESS FOR STABLE MATERIALS 100 M/MIN HYDRAULIC PRESSURE READ OUT - 2 CLOCKS VACUUM BELT CONTROL PANEL ON MOVABLE ARM EQUIPPED WITH: MICRO-PROCESSOR CONTROL SYSTEM ELECTRONIC COUNTER (LABELS/METERS) PRECISE ADJUSTMENT OF REWIND AND UNWIND WEB TENSION ELECTRONIC CORRECTION OF WEB TENSION ON UNWIND AUTOMATIC STOP AT ROLL END REWIND UNIT EQUIPPED WITH 1 PNEUMATIC REWIND SPINDLE R (SERVO DRIVEN) 76 MM MAXIMUM REWIND DIAMETER /440 MM LAY ON ROLLER SIMPLE CHANGE OF WINDING DIRECTION SIMPLE CHANGE OF SPINDLE DIAMETER 2 REWIND SHAFT WITH PNEUMATIC SPINDLE DIAMETER SERWO DRIVEN 76MM MAXIMUM REWIND DIAMETER (FOR 2 SPINDLES) 310MM SIMPLE CHANGE OF WINDING DIRECTION SIMPLE CHANGE OF SPINDLE DIAMETER COUNTING PHOTO CELL NON-STOP STACKER UNIT TO PRODUCE AUTOMATICALLY READY STACKS WITH A MAX. HEIGHT OF 150MM. THE READY STACKS ARE DELIVERED BY MEANS OF A PUSHING SYSTEM. THE RESTRICTION IS A MIN. LABEL SIZE OF 7CM. FOR SMALLER LABELS, 3,5CM – 7CM, THE STACK HAS TO BE TAKEN OUT BY THE 45° PINS MANUALLY. MAX. LABEL SIZE DEPENDING ON WORKING WIDTH OF MAGNETIC CYLINDER. STACK UNIT FOR 4 STREAMS (MAX) DELIVERY CONVEYOR STACKER NON -STOP SEE THE DRAWING DELIVERY CONVEYOR TABLE, INCLUDING VACUUM-BELT (12) AND VACUUM-PUMP (MAX. 4 STREAMS ACROSS) CONVEYOR MOTOR STOP WHEELS VACUUM MOTOR SEPARATION O-BELTS STACK TABLE MOTOR AUTOMATIC OUT-FEED PUSHER STACK TABLE JOGGERS TRANSPORT BELTS COLLECTION TABLE FOR TAKE OFF –THE STACKS SHEAR CUTTING UNIT WITH 3 KNIVES CONTROL PANEL FOR STACKER PANEL ANTISTATIC BARS (TOTAL IN THE MACHINE 3 PCS) POWER UNIT FOR ANTISTATIC BARS MACHINE IS IN PRODUCTION LOCATED IN ENGLAND
Vendedor: Jerry Curtin Limited
Año de construcción: usado
Ubicación: Land-material width:    457 mm<br/>coil weight:    4.5 t<br/>material thickness:   15.8 mm<br/>--------------------------------------------------:  <br/>overall specifications (coil lines):  <br/>- feedstock transport direction: left to right:        <br/>decoiler:  <br/>- design: twin reel:        <br/>- sheet width max:    457 mm<br/>- max. weight of coil:    4.5 to<br/>- max. diameter of coil:   1828 mm<br/>- mandrel expansion range from ...:    508 mm<br/>- mandrel expansion range up to:    609 mm<br/>leveller unit:  <br/>- sheet width max:    457 mm<br/>- sheet thickness max:   15.8 mm<br/>- number of leveller rolls:     21  <br/>electrical specifications:  <br/>- mains voltage:    600 v<br/>- mains frequency:     60 hz<br/>coil reel:       perfecto rd107218<br/>restrictor:      perfecto cbdr18<br/>hold down arm:   perfecto phd18<br/>staightner:      perfecto s381821<br/>threading table: perfecto tts1828<br/><br/><br/><br/><br/> MATERIAL WIDTH: 457 MM
COIL WEIGHT: 4.5 T
MATERIAL THICKNESS: 15.8 MM
--------------------------------------------------:
OVERALL SPECIFICATIONS (COIL LINES):
- FEEDSTOCK TRANSPORT DIRECTION: LEFT TO RIGHT:
DECOILER:
- DESIGN: TWIN REEL:
- SHEET WIDTH MAX: 457 MM
- MAX. WEIGHT OF COIL: 4.5 TO
- MAX. DIAMETER OF COIL: 1828 MM
- MANDREL EXPANSION RANGE FROM ...: 508 MM
- MANDREL EXPANSION RANGE UP TO: 609 MM
LEVELLER UNIT:
- SHEET WIDTH MAX: 457 MM
- SHEET THICKNESS MAX: 15.8 MM
- NUMBER OF LEVELLER ROLLS: 21
ELECTRICAL SPECIFICATIONS:
- MAINS VOLTAGE: 600 V
- MAINS FREQUENCY: 60 HZ
COIL REEL: PERFECTO RD107218
RESTRICTOR: PERFECTO CBDR18
HOLD DOWN ARM: PERFECTO PHD18
STAIGHTNER: PERFECTO S381821
THREADING TABLE: PERFECTO TTS1828




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-1500 mt sulphuric acid, double absorption. new surplus, 50 hz, all the equipment is new and was never installed or unpacked from shipping crates. the european designed plant is stored in a secure climate controlled warehouse and is being kept as per manufactures guidelines. available from a cancelled project.
the process technology licence associated with the plant has never been used and can be transferred to the new owner. the guarantee on the plant can be provided to the new owner once the basic engineering of adapting the plant to the new site conditions have been completed.  the new owner of the plant will not have any restrictions on the engineering company they choose to complete the design, construction and commissioning of this plant.
1500 MT SULPHURIC ACID, DOUBLE ABSORPTION. NEW SURPLUS, 50 HZ, ALL THE EQUIPMENT IS NEW AND WAS NEVER INSTALLED OR UNPACKED FROM SHIPPING CRATES. THE EUROPEAN DESIGNED PLANT IS STORED IN A SECURE CLIMATE CONTROLLED WAREHOUSE AND IS BEING KEPT AS PER MANUFACTURES GUIDELINES. AVAILABLE FROM A CANCELLED PROJECT. THE PROCESS TECHNOLOGY LICENCE ASSOCIATED WITH THE PLANT HAS NEVER BEEN USED AND CAN BE TRANSFERRED TO THE NEW OWNER. THE GUARANTEE ON THE PLANT CAN BE PROVIDED TO THE NEW OWNER ONCE THE BASIC ENGINEERING OF ADAPTING THE PLANT TO THE NEW SITE CONDITIONS HAVE BEEN COMPLETED. THE NEW OWNER OF THE PLANT WILL NOT HAVE ANY RESTRICTIONS ON THE ENGINEERING COMPANY THEY CHOOSE TO COMPLETE THE DESIGN, CONSTRUCTION AND COMMISSIONING OF THIS PLANT.
Vendedor: Brown Energy Group Inc
Año de construcción: usado
Ubicación: Land-internal diameter:250 mm<br/>grinding depth: mm<br/>swing diameter:455 mm<br/>workpiece length - max.:1200 mm<br/>table rotating:-4/+8 °<br/>table speeds:0-4000 mm/min<br/>max. workpiece weight:80 kg<br/>workhead - center taper:5 mk<br/>rotation speed of workhead :0 - 400 1/min<br/>workhead motor:4 kw<br/>3-jaw chuck:250 (selbstschließend) mm<br/>grinding motor:4 kw<br/>coolant pump:2,2 kw<br/>weight approx.:2,4 t<br/>machine dimensions:3200 x 2100 mm<br/>cnc controller:siemens 840 d oder sps von siemens <br/>servo motors: <br/>autom. sensing device for grinding wheel:option <br/>: <br/>linear scales and ballscrew:in allen achsen <br/>grinding wheel dresser: <br/>: <br/>fully enclosed: <br/>: <br/>technical documentation in german language: <br/>ce-design: <br/>signal lamp: <br/>face grinding attachement:durchmesser 125 mm<br/>clamping chuck:250 (selbstschließend), 1 satz harte backen, 1 satz weiche backen, 1 satz innen mm<br/>: <br/>magnetic and paper filter : <br/>levellig elements: <br/>frequency control main spindel engine:für die innenschleifeinrichtung <br/>internal grinding spindle:rpm 28.000, diam. 60 mm. min. diam. cap. 25 mm. x bohrung 50 mm, max. diam. cap. 100 mm. x bohrung 115 mm . <br/>internal grinding spindle:rpm 10.000, diam. 100 mm, min. diam. cap. 50 mm x bohrung 100 mm, max.diam. cap. 250 mm xbohrung 220 mm <br/>fixed steady rests:10-100 mm, 100-170 mm <br/><br/> performance and precision degree   robbi grinding machines are according to the international precision normes iso 2433. the table movement linearity is guaranteed by a max. deviation of  0,002 mm/mt.  the obtainable grinding roundness is :  0,4m (**)  (**)  for a test workpiece ground in our factory during machine testing        the cnc controls :  wheel head movement  (axis x) longitudinal table movement  (axis z) work head spindle rotation speed    the available programs permit the programming of the following grinding cycles  plunge  cylindrical pass   cylindrical pass with interpolation between table and wheel movement to grind taper workpieces radius   the software for the workpiece grinding operation is very simple and intuitive.   to facilitate the programming the software is equipped with an exemplifying graphics, to input the data for each parameter.      the software, has been specially studied, so as to permit also non specialised operators to programme without any problems complex workpieces.   when the workpiece grinding programme has been completed the cnc will automatically make up a summary list, where only the geometric parameters are evidenced.     this list permits with a  glance to verify the complete programme;  this operation is very helpful to verify eventual input data errors or to check rapidly a workpiece programme when reloaded from the file.        while the programme is in execution, it is possible to intervene and modify in real time the technologic parameters, such as:  increments, dwell inversion times, sparkout passes.   also, it is possible to intervene with the jog handwheel.      the grinding machine is composed of :    base  structure in normalised and stabilised cast iron with large ground guides.    the lubrication plant supplies a constant oil flow distributed over the complete length of the guides.    in the middle of the base, there is positioned the ball screw  for the table longitudinal movement.    on all the lower part of the perimeter are situated the recesses for machine levelling.  considering the base structure, usually a foundation is not required.    table   the table is manufactured in two parts, both are in normalised and stabilised cast iron.     the lower  part is composed of wide guides which are ground and accurately hand scrapped, for a better sliding.       the upper part, is swivelable in the two directions, suitable for grinding tapered workpieces.    it includes  a micrometric device with centesimal dial gauge for taper control.       workhead  the structure in normalised, stabilised and well ribbed cast iron, allows to support the workpiece weight and the force generated by the grinding operation.      the spindle rotates on high precision ball bearings, guaranteeing restricted tolerance and maximum rigidity in the working.      the spindle rotation is by means of a three phase motor with variable speed controlled by an inverter.  internal grinding spindle carriage  the structure is composed of a carriage, where the internal grinding spindle is located.    the working feed, is obtained by a re-circulating ball screw and preloaded nut.    the screw movement is assured by a brushless motor.       the incremental optic rule guarantees a wheelhead positioning precision of 0,001 mm.   internal grinding spindle  as there are many and various types of internal grinding spindles, according to the diameters and lengths that need to be ground, the machine is supplied without an internal grinding spindle, so that the customer may select which type is more suitable for his job.      the machine is manufactured standard with a belt transmission suitable for diam. mm. 60, diam. mm. 80 and diam. mm. 100 internal grinding spindles.      on request,  high frequency spindles may be assembled.   wheelhead  for face grinding the structure is composed of a carriage, where the face grinding device is located.    the positioning is obtained by an hydraulic cylinder.   the diamond dressing device is assembled on the face grinding device casing.   manual feed handwheels  electronic type, with double selection of the increments division 0.1 - 0.01 and 0.001 mm.  for wheelhead and table movements.     diamond dresser  the internal diamond dressing device is very strong and is positioned on the table.     it starts  hydraulically, when the dressing operation is selected, by the operator.     the dressing operation may be carried out manually or in automatic cycle.    equipment and electrical plant  in a cooled cabinet, separate from the machine.      hydraulic plant   the hydraulic power pack, is separate from the machine and activates the hydraulic diamond dresser and face grinding device.       lubrication plant the lubrication power pack, is separate from the machine and supplies continuous oil to the wheelhead guides.   the recovered oil is filtered and then resent to the power pack.     the re-circulating ball screw nut for the working feed, is grease lubricated.           coolant plant  large capacity tank for the coolant water, complete with electric equipment.       equipped with coolant magnet cleaner  and coolant paper roll cleaner.       protections  for the protection of the operator all movable parts are covered with suitable guards.     precisely: protection casing for belts, protection casing for grinding wheel and bellows for guides.   the machine is completely closed and the front protection is a sheet sliding doors with poly-carbonate shields.   a safety device, does not permit the automatic cycle to start if the front sliding doors are open.   INTERNAL DIAMETER:250 MM
GRINDING DEPTH: MM
SWING DIAMETER:455 MM
WORKPIECE LENGTH - MAX.:1200 MM
TABLE ROTATING:-4/+8 °
TABLE SPEEDS:0-4000 MM/MIN
MAX. WORKPIECE WEIGHT:80 KG
WORKHEAD - CENTER TAPER:5 MK
ROTATION SPEED OF WORKHEAD :0 - 400 1/MIN
WORKHEAD MOTOR:4 KW
3-JAW CHUCK:250 (SELBSTSCHLIEßEND) MM
GRINDING MOTOR:4 KW
COOLANT PUMP:2,2 KW
WEIGHT APPROX.:2,4 T
MACHINE DIMENSIONS:3200 X 2100 MM
CNC CONTROLLER:SIEMENS 840 D ODER SPS VON SIEMENS
SERVO MOTORS:
AUTOM. SENSING DEVICE FOR GRINDING WHEEL:OPTION
:
LINEAR SCALES AND BALLSCREW:IN ALLEN ACHSEN
GRINDING WHEEL DRESSER:
:
FULLY ENCLOSED:
:
TECHNICAL DOCUMENTATION IN GERMAN LANGUAGE:
CE-DESIGN:
SIGNAL LAMP:
FACE GRINDING ATTACHEMENT:DURCHMESSER 125 MM
CLAMPING CHUCK:250 (SELBSTSCHLIEßEND), 1 SATZ HARTE BACKEN, 1 SATZ WEICHE BACKEN, 1 SATZ INNEN MM
:
MAGNETIC AND PAPER FILTER :
LEVELLIG ELEMENTS:
FREQUENCY CONTROL MAIN SPINDEL ENGINE:FüR DIE INNENSCHLEIFEINRICHTUNG
INTERNAL GRINDING SPINDLE:RPM 28.000, DIAM. 60 MM. MIN. DIAM. CAP. 25 MM. X BOHRUNG 50 MM, MAX. DIAM. CAP. 100 MM. X BOHRUNG 115 MM .
INTERNAL GRINDING SPINDLE:RPM 10.000, DIAM. 100 MM, MIN. DIAM. CAP. 50 MM X BOHRUNG 100 MM, MAX.DIAM. CAP. 250 MM XBOHRUNG 220 MM
FIXED STEADY RESTS:10-100 MM, 100-170 MM

PERFORMANCE AND PRECISION DEGREE ROBBI GRINDING MACHINES ARE ACCORDING TO THE INTERNATIONAL PRECISION NORMES ISO 2433. THE TABLE MOVEMENT LINEARITY IS GUARANTEED BY A MAX. DEVIATION OF 0,002 MM/MT. THE OBTAINABLE GRINDING ROUNDNESS IS : 0,4M (**) (**) FOR A TEST WORKPIECE GROUND IN OUR FACTORY DURING MACHINE TESTING THE CNC CONTROLS : WHEEL HEAD MOVEMENT (AXIS X) LONGITUDINAL TABLE MOVEMENT (AXIS Z) WORK HEAD SPINDLE ROTATION SPEED THE AVAILABLE PROGRAMS PERMIT THE PROGRAMMING OF THE FOLLOWING GRINDING CYCLES PLUNGE CYLINDRICAL PASS CYLINDRICAL PASS WITH INTERPOLATION BETWEEN TABLE AND WHEEL MOVEMENT TO GRIND TAPER WORKPIECES RADIUS THE SOFTWARE FOR THE WORKPIECE GRINDING OPERATION IS VERY SIMPLE AND INTUITIVE. TO FACILITATE THE PROGRAMMING THE SOFTWARE IS EQUIPPED WITH AN EXEMPLIFYING GRAPHICS, TO INPUT THE DATA FOR EACH PARAMETER. THE SOFTWARE, HAS BEEN SPECIALLY STUDIED, SO AS TO PERMIT ALSO NON SPECIALISED OPERATORS TO PROGRAMME WITHOUT ANY PROBLEMS COMPLEX WORKPIECES. WHEN THE WORKPIECE GRINDING PROGRAMME HAS BEEN COMPLETED THE CNC WILL AUTOMATICALLY MAKE UP A SUMMARY LIST, WHERE ONLY THE GEOMETRIC PARAMETERS ARE EVIDENCED. THIS LIST PERMITS WITH A GLANCE TO VERIFY THE COMPLETE PROGRAMME; THIS OPERATION IS VERY HELPFUL TO VERIFY EVENTUAL INPUT DATA ERRORS OR TO CHECK RAPIDLY A WORKPIECE PROGRAMME WHEN RELOADED FROM THE FILE. WHILE THE PROGRAMME IS IN EXECUTION, IT IS POSSIBLE TO INTERVENE AND MODIFY IN REAL TIME THE TECHNOLOGIC PARAMETERS, SUCH AS: INCREMENTS, DWELL INVERSION TIMES, SPARKOUT PASSES. ALSO, IT IS POSSIBLE TO INTERVENE WITH THE JOG HANDWHEEL. THE GRINDING MACHINE IS COMPOSED OF : BASE STRUCTURE IN NORMALISED AND STABILISED CAST IRON WITH LARGE GROUND GUIDES. THE LUBRICATION PLANT SUPPLIES A CONSTANT OIL FLOW DISTRIBUTED OVER THE COMPLETE LENGTH OF THE GUIDES. IN THE MIDDLE OF THE BASE, THERE IS POSITIONED THE BALL SCREW FOR THE TABLE LONGITUDINAL MOVEMENT. ON ALL THE LOWER PART OF THE PERIMETER ARE SITUATED THE RECESSES FOR MACHINE LEVELLING. CONSIDERING THE BASE STRUCTURE, USUALLY A FOUNDATION IS NOT REQUIRED. TABLE THE TABLE IS MANUFACTURED IN TWO PARTS, BOTH ARE IN NORMALISED AND STABILISED CAST IRON. THE LOWER PART IS COMPOSED OF WIDE GUIDES WHICH ARE GROUND AND ACCURATELY HAND SCRAPPED, FOR A BETTER SLIDING. THE UPPER PART, IS SWIVELABLE IN THE TWO DIRECTIONS, SUITABLE FOR GRINDING TAPERED WORKPIECES. IT INCLUDES A MICROMETRIC DEVICE WITH CENTESIMAL DIAL GAUGE FOR TAPER CONTROL. WORKHEAD THE STRUCTURE IN NORMALISED, STABILISED AND WELL RIBBED CAST IRON, ALLOWS TO SUPPORT THE WORKPIECE WEIGHT AND THE FORCE GENERATED BY THE GRINDING OPERATION. THE SPINDLE ROTATES ON HIGH PRECISION BALL BEARINGS, GUARANTEEING RESTRICTED TOLERANCE AND MAXIMUM RIGIDITY IN THE WORKING. THE SPINDLE ROTATION IS BY MEANS OF A THREE PHASE MOTOR WITH VARIABLE SPEED CONTROLLED BY AN INVERTER. INTERNAL GRINDING SPINDLE CARRIAGE THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE INTERNAL GRINDING SPINDLE IS LOCATED. THE WORKING FEED, IS OBTAINED BY A RE-CIRCULATING BALL SCREW AND PRELOADED NUT. THE SCREW MOVEMENT IS ASSURED BY A BRUSHLESS MOTOR. THE INCREMENTAL OPTIC RULE GUARANTEES A WHEELHEAD POSITIONING PRECISION OF 0,001 MM. INTERNAL GRINDING SPINDLE AS THERE ARE MANY AND VARIOUS TYPES OF INTERNAL GRINDING SPINDLES, ACCORDING TO THE DIAMETERS AND LENGTHS THAT NEED TO BE GROUND, THE MACHINE IS SUPPLIED WITHOUT AN INTERNAL GRINDING SPINDLE, SO THAT THE CUSTOMER MAY SELECT WHICH TYPE IS MORE SUITABLE FOR HIS JOB. THE MACHINE IS MANUFACTURED STANDARD WITH A BELT TRANSMISSION SUITABLE FOR DIAM. MM. 60, DIAM. MM. 80 AND DIAM. MM. 100 INTERNAL GRINDING SPINDLES. ON REQUEST, HIGH FREQUENCY SPINDLES MAY BE ASSEMBLED. WHEELHEAD FOR FACE GRINDING THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE FACE GRINDING DEVICE IS LOCATED. THE POSITIONING IS OBTAINED BY AN HYDRAULIC CYLINDER. THE DIAMOND DRESSING DEVICE IS ASSEMBLED ON THE FACE GRINDING DEVICE CASING. MANUAL FEED HANDWHEELS ELECTRONIC TYPE, WITH DOUBLE SELECTION OF THE INCREMENTS DIVISION 0.1 - 0.01 AND 0.001 MM. FOR WHEELHEAD AND TABLE MOVEMENTS. DIAMOND DRESSER THE INTERNAL DIAMOND DRESSING DEVICE IS VERY STRONG AND IS POSITIONED ON THE TABLE. IT STARTS HYDRAULICALLY, WHEN THE DRESSING OPERATION IS SELECTED, BY THE OPERATOR. THE DRESSING OPERATION MAY BE CARRIED OUT MANUALLY OR IN AUTOMATIC CYCLE. EQUIPMENT AND ELECTRICAL PLANT IN A COOLED CABINET, SEPARATE FROM THE MACHINE. HYDRAULIC PLANT THE HYDRAULIC POWER PACK, IS SEPARATE FROM THE MACHINE AND ACTIVATES THE HYDRAULIC DIAMOND DRESSER AND FACE GRINDING DEVICE. LUBRICATION PLANT THE LUBRICATION POWER PACK, IS SEPARATE FROM THE MACHINE AND SUPPLIES CONTINUOUS OIL TO THE WHEELHEAD GUIDES. THE RECOVERED OIL IS FILTERED AND THEN RESENT TO THE POWER PACK. THE RE-CIRCULATING BALL SCREW NUT FOR THE WORKING FEED, IS GREASE LUBRICATED. COOLANT PLANT LARGE CAPACITY TANK FOR THE COOLANT WATER, COMPLETE WITH ELECTRIC EQUIPMENT. EQUIPPED WITH COOLANT MAGNET CLEANER AND COOLANT PAPER ROLL CLEANER. PROTECTIONS FOR THE PROTECTION OF THE OPERATOR ALL MOVABLE PARTS ARE COVERED WITH SUITABLE GUARDS. PRECISELY: PROTECTION CASING FOR BELTS, PROTECTION CASING FOR GRINDING WHEEL AND BELLOWS FOR GUIDES. THE MACHINE IS COMPLETELY CLOSED AND THE FRONT PROTECTION IS A SHEET SLIDING DOORS WITH POLY-CARBONATE SHIELDS. A SAFETY DEVICE, DOES NOT PERMIT THE AUTOMATIC CYCLE TO START IF THE FRONT SLIDING DOORS ARE OPEN.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-r3000 storage shelf by ssi schã¤fer

1 x mounting box consists of:
1 x side stand
1 x cross association: to stabilize
4 x shelves

dimensions
height option 2.278 / 2.490 / 2,967 mm
field width 994 mm
outer width 1025 mm
depth: 600 mm

prices:

field height 2.278 mm: â?¬80 (+ vat + shipping)
field height 2,490 mm: â?¬82 (+ vat + shipping)
field height 2,967 mm: â?¬85 (+ vat + shipping)

other prices on request.

description:

compose your storage system individually and create a professional working environment.

with the r3000 storage system you get tested safety quality. the robust all-in-one solution allows a great freedom of design, as well as subsequent expansion or remodeling for your stock. thanks to the wide range of products you can customize the shelf your wishes and requirements.

the r3000 shelf is suitable with a depth of 600 mm and a width of tray of 994 mm perfect for structured storage of large loads. the cross association is used to stabilize the stock system from ssi schã¤fer.

the stand of the frame can be closed by a cap above. for this, 2 end caps are needed per frame.

on request with order drawers for shelf r3000 with panel height 100 or 206 mm, as well as partition walls in the heights can be 100, 175 or 275 mm. in addition, tire traverses can be ordered, to store tires. it requires 2 crossbars for a shelf level.

(suitable for normal tire diameter shelf with depth 400 mm)

for the field width 994 mm can be selected besides optional cutter holder bar for sk40 moulder heads. 



it's b-stock with minimal optical defects (minor paint defects, fine scratches, slight quirks or dents - see pictures and consider item description) without any function restrictions! R3000 STORAGE SHELF BY SSI SCH&ATILDE;&CURREN;FER 1 X MOUNTING BOX CONSISTS OF: 1 X SIDE STAND 1 X CROSS ASSOCIATION: TO STABILIZE 4 X SHELVES DIMENSIONS HEIGHT OPTION 2.278 / 2.490 / 2,967 MM FIELD WIDTH 994 MM OUTER WIDTH 1025 MM DEPTH: 600 MM PRICES: FIELD HEIGHT 2.278 MM: &ACIRC;?&NOT;80 (+ VAT + SHIPPING) FIELD HEIGHT 2,490 MM: &ACIRC;?&NOT;82 (+ VAT + SHIPPING) FIELD HEIGHT 2,967 MM: &ACIRC;?&NOT;85 (+ VAT + SHIPPING) OTHER PRICES ON REQUEST. DESCRIPTION: COMPOSE YOUR STORAGE SYSTEM INDIVIDUALLY AND CREATE A PROFESSIONAL WORKING ENVIRONMENT. WITH THE R3000 STORAGE SYSTEM YOU GET TESTED SAFETY QUALITY. THE ROBUST ALL-IN-ONE SOLUTION ALLOWS A GREAT FREEDOM OF DESIGN, AS WELL AS SUBSEQUENT EXPANSION OR REMODELING FOR YOUR STOCK. THANKS TO THE WIDE RANGE OF PRODUCTS YOU CAN CUSTOMIZE THE SHELF YOUR WISHES AND REQUIREMENTS. THE R3000 SHELF IS SUITABLE WITH A DEPTH OF 600 MM AND A WIDTH OF TRAY OF 994 MM PERFECT FOR STRUCTURED STORAGE OF LARGE LOADS. THE CROSS ASSOCIATION IS USED TO STABILIZE THE STOCK SYSTEM FROM SSI SCH&ATILDE;&CURREN;FER. THE STAND OF THE FRAME CAN BE CLOSED BY A CAP ABOVE. FOR THIS, 2 END CAPS ARE NEEDED PER FRAME. ON REQUEST WITH ORDER DRAWERS FOR SHELF R3000 WITH PANEL HEIGHT 100 OR 206 MM, AS WELL AS PARTITION WALLS IN THE HEIGHTS CAN BE 100, 175 OR 275 MM. IN ADDITION, TIRE TRAVERSES CAN BE ORDERED, TO STORE TIRES. IT REQUIRES 2 CROSSBARS FOR A SHELF LEVEL. (SUITABLE FOR NORMAL TIRE DIAMETER SHELF WITH DEPTH 400 MM) FOR THE FIELD WIDTH 994 MM CAN BE SELECTED BESIDES OPTIONAL CUTTER HOLDER BAR FOR SK40 MOULDER HEADS. IT'S B-STOCK WITH MINIMAL OPTICAL DEFECTS (MINOR PAINT DEFECTS, FINE SCRATCHES, SLIGHT QUIRKS OR DENTS - SEE PICTURES AND CONSIDER ITEM DESCRIPTION) WITHOUT ANY FUNCTION RESTRICTIONS!
Vendedor: DZ Lagertechnik GbR
Año de construcción: usado
Ubicación: Land-internal diameter:300 mm<br/>grinding depth: mm<br/>swing diameter:300/350 mm<br/>workpiece length - max.:2300 mm<br/>table rotating:-2/+6 °<br/>table speeds:0-4000 mm/min<br/>max. workpiece weight:400 (fliegend, 150mm von der spindelnase) kg<br/>workhead - center taper:6 mk<br/>rotation speed of workhead :0 - 400 1/min<br/>workhead motor:4 kw<br/>3-jaw chuck:250 (selbstschließend) mm<br/>grinding motor:11 kw<br/>coolant pump:2,2 kw<br/>cnc controller:siemens 840 d oder sps von siemens <br/>servo motors: <br/>autom. sensing device for grinding wheel:option <br/>: <br/>linear scales and ballscrew:in allen achsen <br/>grinding wheel dresser: <br/>: <br/>fully enclosed: <br/>: <br/>technical documentation in german language: <br/>ce-design: <br/>signal lamp: <br/>face grinding attachement:durchmesser 125 mm<br/>clamping chuck:350 (selbst zentrierend) mm<br/>: <br/>magnetic and paper filter : <br/>levellig elements: <br/>frequency control main spindel engine:für die innenschleifeinrichtung <br/>internal grinding spindle:auf anfrage <br/>internal grinding spindle:auf anfrage <br/>fixed steady rests:10-100 mm, 100-170 mm <br/><br/> performance and precision degree   robbi grinding machines are according to the international precision normes iso 2433. the table movement linearity is guaranteed by a max. deviation of  0,002 mm/mt.  the obtainable grinding roundness is :  0,4m (**)  (**)  for a test workpiece ground in our factory during machine testing        the cnc controls :  wheel head movement  (axis x) longitudinal table movement  (axis z) work head spindle rotation speed    the available programs permit the programming of the following grinding cycles  plunge  cylindrical pass   cylindrical pass with interpolation between table and wheel movement to grind taper workpieces radius   the software for the workpiece grinding operation is very simple and intuitive.   to facilitate the programming the software is equipped with an exemplifying graphics, to input the data for each parameter.      the software, has been specially studied, so as to permit also non specialised operators to programme without any problems complex workpieces.   when the workpiece grinding programme has been completed the cnc will automatically make up a summary list, where only the geometric parameters are evidenced.     this list permits with a  glance to verify the complete programme;  this operation is very helpful to verify eventual input data errors or to check rapidly a workpiece programme when reloaded from the file.        while the programme is in execution, it is possible to intervene and modify in real time the technologic parameters, such as:  increments, dwell inversion times, sparkout passes.   also, it is possible to intervene with the jog handwheel.      the grinding machine is composed of :    base  structure in normalised and stabilised cast iron with large ground guides.    the lubrication plant supplies a constant oil flow distributed over the complete length of the guides.    in the middle of the base, there is positioned the ball screw  for the table longitudinal movement.    on all the lower part of the perimeter are situated the recesses for machine levelling.  considering the base structure, usually a foundation is not required.    table   the table is manufactured in two parts, both are in normalised and stabilised cast iron.     the lower  part is composed of wide guides which are ground and accurately hand scrapped, for a better sliding.       the upper part, is swivelable in the two directions, suitable for grinding tapered workpieces.    it includes  a micrometric device with centesimal dial gauge for taper control.       workhead  the structure in normalised, stabilised and well ribbed cast iron, allows to support the workpiece weight and the force generated by the grinding operation.      the spindle rotates on high precision ball bearings, guaranteeing restricted tolerance and maximum rigidity in the working.      the spindle rotation is by means of a three phase motor with variable speed controlled by an inverter.  internal grinding spindle carriage  the structure is composed of a carriage, where the internal grinding spindle is located.    the working feed, is obtained by a re-circulating ball screw and preloaded nut.    the screw movement is assured by a brushless motor.       the incremental optic rule guarantees a wheelhead positioning precision of 0,001 mm.   internal grinding spindle  as there are many and various types of internal grinding spindles, according to the diameters and lengths that need to be ground, the machine is supplied without an internal grinding spindle, so that the customer may select which type is more suitable for his job.      the machine is manufactured standard with a belt transmission suitable for diam. mm. 60, diam. mm. 80 and diam. mm. 100 internal grinding spindles.      on request,  high frequency spindles may be assembled.   wheelhead  for face grinding the structure is composed of a carriage, where the face grinding device is located.    the positioning is obtained by an hydraulic cylinder.   the diamond dressing device is assembled on the face grinding device casing.   manual feed handwheels  electronic type, with double selection of the increments division 0.1 - 0.01 and 0.001 mm.  for wheelhead and table movements.     diamond dresser  the internal diamond dressing device is very strong and is positioned on the table.     it starts  hydraulically, when the dressing operation is selected, by the operator.     the dressing operation may be carried out manually or in automatic cycle.    equipment and electrical plant  in a cooled cabinet, separate from the machine.      hydraulic plant   the hydraulic power pack, is separate from the machine and activates the hydraulic diamond dresser and face grinding device.       lubrication plant the lubrication power pack, is separate from the machine and supplies continuous oil to the wheelhead guides.   the recovered oil is filtered and then resent to the power pack.     the re-circulating ball screw nut for the working feed, is grease lubricated.           coolant plant  large capacity tank for the coolant water, complete with electric equipment.       equipped with coolant magnet cleaner  and coolant paper roll cleaner.       protections  for the protection of the operator all movable parts are covered with suitable guards.     precisely: protection casing for belts, protection casing for grinding wheel and bellows for guides.   the machine is completely closed and the front protection is a sheet sliding doors with poly-carbonate shields.   a safety device, does not permit the automatic cycle to start if the front sliding doors are open.   INTERNAL DIAMETER:300 MM
GRINDING DEPTH: MM
SWING DIAMETER:300/350 MM
WORKPIECE LENGTH - MAX.:2300 MM
TABLE ROTATING:-2/+6 °
TABLE SPEEDS:0-4000 MM/MIN
MAX. WORKPIECE WEIGHT:400 (FLIEGEND, 150MM VON DER SPINDELNASE) KG
WORKHEAD - CENTER TAPER:6 MK
ROTATION SPEED OF WORKHEAD :0 - 400 1/MIN
WORKHEAD MOTOR:4 KW
3-JAW CHUCK:250 (SELBSTSCHLIEßEND) MM
GRINDING MOTOR:11 KW
COOLANT PUMP:2,2 KW
CNC CONTROLLER:SIEMENS 840 D ODER SPS VON SIEMENS
SERVO MOTORS:
AUTOM. SENSING DEVICE FOR GRINDING WHEEL:OPTION
:
LINEAR SCALES AND BALLSCREW:IN ALLEN ACHSEN
GRINDING WHEEL DRESSER:
:
FULLY ENCLOSED:
:
TECHNICAL DOCUMENTATION IN GERMAN LANGUAGE:
CE-DESIGN:
SIGNAL LAMP:
FACE GRINDING ATTACHEMENT:DURCHMESSER 125 MM
CLAMPING CHUCK:350 (SELBST ZENTRIEREND) MM
:
MAGNETIC AND PAPER FILTER :
LEVELLIG ELEMENTS:
FREQUENCY CONTROL MAIN SPINDEL ENGINE:FüR DIE INNENSCHLEIFEINRICHTUNG
INTERNAL GRINDING SPINDLE:AUF ANFRAGE
INTERNAL GRINDING SPINDLE:AUF ANFRAGE
FIXED STEADY RESTS:10-100 MM, 100-170 MM

PERFORMANCE AND PRECISION DEGREE ROBBI GRINDING MACHINES ARE ACCORDING TO THE INTERNATIONAL PRECISION NORMES ISO 2433. THE TABLE MOVEMENT LINEARITY IS GUARANTEED BY A MAX. DEVIATION OF 0,002 MM/MT. THE OBTAINABLE GRINDING ROUNDNESS IS : 0,4M (**) (**) FOR A TEST WORKPIECE GROUND IN OUR FACTORY DURING MACHINE TESTING THE CNC CONTROLS : WHEEL HEAD MOVEMENT (AXIS X) LONGITUDINAL TABLE MOVEMENT (AXIS Z) WORK HEAD SPINDLE ROTATION SPEED THE AVAILABLE PROGRAMS PERMIT THE PROGRAMMING OF THE FOLLOWING GRINDING CYCLES PLUNGE CYLINDRICAL PASS CYLINDRICAL PASS WITH INTERPOLATION BETWEEN TABLE AND WHEEL MOVEMENT TO GRIND TAPER WORKPIECES RADIUS THE SOFTWARE FOR THE WORKPIECE GRINDING OPERATION IS VERY SIMPLE AND INTUITIVE. TO FACILITATE THE PROGRAMMING THE SOFTWARE IS EQUIPPED WITH AN EXEMPLIFYING GRAPHICS, TO INPUT THE DATA FOR EACH PARAMETER. THE SOFTWARE, HAS BEEN SPECIALLY STUDIED, SO AS TO PERMIT ALSO NON SPECIALISED OPERATORS TO PROGRAMME WITHOUT ANY PROBLEMS COMPLEX WORKPIECES. WHEN THE WORKPIECE GRINDING PROGRAMME HAS BEEN COMPLETED THE CNC WILL AUTOMATICALLY MAKE UP A SUMMARY LIST, WHERE ONLY THE GEOMETRIC PARAMETERS ARE EVIDENCED. THIS LIST PERMITS WITH A GLANCE TO VERIFY THE COMPLETE PROGRAMME; THIS OPERATION IS VERY HELPFUL TO VERIFY EVENTUAL INPUT DATA ERRORS OR TO CHECK RAPIDLY A WORKPIECE PROGRAMME WHEN RELOADED FROM THE FILE. WHILE THE PROGRAMME IS IN EXECUTION, IT IS POSSIBLE TO INTERVENE AND MODIFY IN REAL TIME THE TECHNOLOGIC PARAMETERS, SUCH AS: INCREMENTS, DWELL INVERSION TIMES, SPARKOUT PASSES. ALSO, IT IS POSSIBLE TO INTERVENE WITH THE JOG HANDWHEEL. THE GRINDING MACHINE IS COMPOSED OF : BASE STRUCTURE IN NORMALISED AND STABILISED CAST IRON WITH LARGE GROUND GUIDES. THE LUBRICATION PLANT SUPPLIES A CONSTANT OIL FLOW DISTRIBUTED OVER THE COMPLETE LENGTH OF THE GUIDES. IN THE MIDDLE OF THE BASE, THERE IS POSITIONED THE BALL SCREW FOR THE TABLE LONGITUDINAL MOVEMENT. ON ALL THE LOWER PART OF THE PERIMETER ARE SITUATED THE RECESSES FOR MACHINE LEVELLING. CONSIDERING THE BASE STRUCTURE, USUALLY A FOUNDATION IS NOT REQUIRED. TABLE THE TABLE IS MANUFACTURED IN TWO PARTS, BOTH ARE IN NORMALISED AND STABILISED CAST IRON. THE LOWER PART IS COMPOSED OF WIDE GUIDES WHICH ARE GROUND AND ACCURATELY HAND SCRAPPED, FOR A BETTER SLIDING. THE UPPER PART, IS SWIVELABLE IN THE TWO DIRECTIONS, SUITABLE FOR GRINDING TAPERED WORKPIECES. IT INCLUDES A MICROMETRIC DEVICE WITH CENTESIMAL DIAL GAUGE FOR TAPER CONTROL. WORKHEAD THE STRUCTURE IN NORMALISED, STABILISED AND WELL RIBBED CAST IRON, ALLOWS TO SUPPORT THE WORKPIECE WEIGHT AND THE FORCE GENERATED BY THE GRINDING OPERATION. THE SPINDLE ROTATES ON HIGH PRECISION BALL BEARINGS, GUARANTEEING RESTRICTED TOLERANCE AND MAXIMUM RIGIDITY IN THE WORKING. THE SPINDLE ROTATION IS BY MEANS OF A THREE PHASE MOTOR WITH VARIABLE SPEED CONTROLLED BY AN INVERTER. INTERNAL GRINDING SPINDLE CARRIAGE THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE INTERNAL GRINDING SPINDLE IS LOCATED. THE WORKING FEED, IS OBTAINED BY A RE-CIRCULATING BALL SCREW AND PRELOADED NUT. THE SCREW MOVEMENT IS ASSURED BY A BRUSHLESS MOTOR. THE INCREMENTAL OPTIC RULE GUARANTEES A WHEELHEAD POSITIONING PRECISION OF 0,001 MM. INTERNAL GRINDING SPINDLE AS THERE ARE MANY AND VARIOUS TYPES OF INTERNAL GRINDING SPINDLES, ACCORDING TO THE DIAMETERS AND LENGTHS THAT NEED TO BE GROUND, THE MACHINE IS SUPPLIED WITHOUT AN INTERNAL GRINDING SPINDLE, SO THAT THE CUSTOMER MAY SELECT WHICH TYPE IS MORE SUITABLE FOR HIS JOB. THE MACHINE IS MANUFACTURED STANDARD WITH A BELT TRANSMISSION SUITABLE FOR DIAM. MM. 60, DIAM. MM. 80 AND DIAM. MM. 100 INTERNAL GRINDING SPINDLES. ON REQUEST, HIGH FREQUENCY SPINDLES MAY BE ASSEMBLED. WHEELHEAD FOR FACE GRINDING THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE FACE GRINDING DEVICE IS LOCATED. THE POSITIONING IS OBTAINED BY AN HYDRAULIC CYLINDER. THE DIAMOND DRESSING DEVICE IS ASSEMBLED ON THE FACE GRINDING DEVICE CASING. MANUAL FEED HANDWHEELS ELECTRONIC TYPE, WITH DOUBLE SELECTION OF THE INCREMENTS DIVISION 0.1 - 0.01 AND 0.001 MM. FOR WHEELHEAD AND TABLE MOVEMENTS. DIAMOND DRESSER THE INTERNAL DIAMOND DRESSING DEVICE IS VERY STRONG AND IS POSITIONED ON THE TABLE. IT STARTS HYDRAULICALLY, WHEN THE DRESSING OPERATION IS SELECTED, BY THE OPERATOR. THE DRESSING OPERATION MAY BE CARRIED OUT MANUALLY OR IN AUTOMATIC CYCLE. EQUIPMENT AND ELECTRICAL PLANT IN A COOLED CABINET, SEPARATE FROM THE MACHINE. HYDRAULIC PLANT THE HYDRAULIC POWER PACK, IS SEPARATE FROM THE MACHINE AND ACTIVATES THE HYDRAULIC DIAMOND DRESSER AND FACE GRINDING DEVICE. LUBRICATION PLANT THE LUBRICATION POWER PACK, IS SEPARATE FROM THE MACHINE AND SUPPLIES CONTINUOUS OIL TO THE WHEELHEAD GUIDES. THE RECOVERED OIL IS FILTERED AND THEN RESENT TO THE POWER PACK. THE RE-CIRCULATING BALL SCREW NUT FOR THE WORKING FEED, IS GREASE LUBRICATED. COOLANT PLANT LARGE CAPACITY TANK FOR THE COOLANT WATER, COMPLETE WITH ELECTRIC EQUIPMENT. EQUIPPED WITH COOLANT MAGNET CLEANER AND COOLANT PAPER ROLL CLEANER. PROTECTIONS FOR THE PROTECTION OF THE OPERATOR ALL MOVABLE PARTS ARE COVERED WITH SUITABLE GUARDS. PRECISELY: PROTECTION CASING FOR BELTS, PROTECTION CASING FOR GRINDING WHEEL AND BELLOWS FOR GUIDES. THE MACHINE IS COMPLETELY CLOSED AND THE FRONT PROTECTION IS A SHEET SLIDING DOORS WITH POLY-CARBONATE SHIELDS. A SAFETY DEVICE, DOES NOT PERMIT THE AUTOMATIC CYCLE TO START IF THE FRONT SLIDING DOORS ARE OPEN.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-electrical district - nibbelmaschine
drabert sons kn 1000 - 01-99-030
shipping time: immediately

id: 01-99-030

manufacturer: drabert sons
type: kn 1000

machine data
year: circa 1975
l x w x h: ca. 1800 x 600 x 1400 mm
weight: approx. 400 kg

technical data
electrical district - nibbelmaschine
control: conventional

min. radius: 100 mm
max radius: approx. 1000 mm
maximum sheet thickness (steel): approx. 3 mm
maximum sheet thickness (aluminum): approx. 4 mm
maximum sheet thickness (stainless steel): approx. 2 mm
maximum thickness of sheet metal (copper): approx. 2.5 mm
power: approx. 4,0 kw

accessories
â?¢ foot switch
â?¢ various knife dies

other accessories on request
price and other specifications on request ELECTRICAL DISTRICT - NIBBELMASCHINE DRABERT SONS KN 1000 - 01-99-030 SHIPPING TIME: IMMEDIATELY ID: 01-99-030 MANUFACTURER: DRABERT SONS TYPE: KN 1000 MACHINE DATA YEAR: CIRCA 1975 L X W X H: CA. 1800 X 600 X 1400 MM WEIGHT: APPROX. 400 KG TECHNICAL DATA ELECTRICAL DISTRICT - NIBBELMASCHINE CONTROL: CONVENTIONAL MIN. RADIUS: 100 MM MAX RADIUS: APPROX. 1000 MM MAXIMUM SHEET THICKNESS (STEEL): APPROX. 3 MM MAXIMUM SHEET THICKNESS (ALUMINUM): APPROX. 4 MM MAXIMUM SHEET THICKNESS (STAINLESS STEEL): APPROX. 2 MM MAXIMUM THICKNESS OF SHEET METAL (COPPER): APPROX. 2.5 MM POWER: APPROX. 4,0 KW ACCESSORIES &ACIRC;?&CENT; FOOT SWITCH &ACIRC;?&CENT; VARIOUS KNIFE DIES OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-internal diameter:250 mm<br/>grinding depth: mm<br/>swing diameter:460 mm<br/>workpiece diameter:455 (max.) mm<br/>workpiece length - max.:1000 mm<br/>table rotating:-4/+8 °<br/>table speeds:0-4000 mm/min<br/>max. workpiece weight:80 kg<br/>workhead - center taper:5 mk<br/>rotation speed of workhead :0 - 400 1/min<br/>workhead motor:4 kw<br/>3-jaw chuck:250 (selbstschließend) mm<br/>grinding motor:4 kw<br/>coolant pump:2,2 kw<br/>weight approx.:2,4 t<br/>machine dimensions:3200 x 2100 xx<br/>cnc controller:siemens 840 d <br/>servo motors: <br/>autom. sensing device for grinding wheel:option <br/>: <br/>linear scales and ballscrew:in allen achsen <br/>grinding wheel dresser: <br/>: <br/>fully enclosed: <br/>: <br/>technical documentation in german language: <br/>ce-design: <br/>signal lamp: <br/>face grinding attachement:durchmesser 125 mm<br/>clamping chuck:250 (selbstschließend), 1 satz harte backen, 1 satz weiche backen, 1 satz innen mm<br/>: <br/>magnetic and paper filter : <br/>levellig elements: <br/>frequency control main spindel engine:für die innenschleifeinrichtung <br/>internal grinding spindle:rpm 28.000, diam. 60 mm. min. diam. cap. 25 mm. x bohrung 50 mm, max. diam. cap. 100 mm. x bohrung 115 mm . <br/>internal grinding spindle:rpm 10.000, diam. 100 mm, min. diam. cap. 50 mm x bohrung 100 mm, max.diam. cap. 250 mm xbohrung 220 mm <br/>fixed steady rests:10-100 mm, 100-170 mm <br/><br/> performance and precision degree   robbi grinding machines are according to the international precision normes iso 2433. the table movement linearity is guaranteed by a max. deviation of  0,002 mm/mt.  the obtainable grinding roundness is :  0,4m (**)  (**)  for a test workpiece ground in our factory during machine testing        the cnc controls :  wheel head movement  (axis x) longitudinal table movement  (axis z) work head spindle rotation speed    the available programs permit the programming of the following grinding cycles  plunge  cylindrical pass   cylindrical pass with interpolation between table and wheel movement to grind taper workpieces radius   the software for the workpiece grinding operation is very simple and intuitive.   to facilitate the programming the software is equipped with an exemplifying graphics, to input the data for each parameter.      the software, has been specially studied, so as to permit also non specialised operators to programme without any problems complex workpieces.   when the workpiece grinding programme has been completed the cnc will automatically make up a summary list, where only the geometric parameters are evidenced.     this list permits with a  glance to verify the complete programme;  this operation is very helpful to verify eventual input data errors or to check rapidly a workpiece programme when reloaded from the file.        while the programme is in execution, it is possible to intervene and modify in real time the technologic parameters, such as:  increments, dwell inversion times, sparkout passes.   also, it is possible to intervene with the jog handwheel.      the grinding machine is composed of :    base  structure in normalised and stabilised cast iron with large ground guides.    the lubrication plant supplies a constant oil flow distributed over the complete length of the guides.    in the middle of the base, there is positioned the ball screw  for the table longitudinal movement.    on all the lower part of the perimeter are situated the recesses for machine levelling.  considering the base structure, usually a foundation is not required.    table   the table is manufactured in two parts, both are in normalised and stabilised cast iron.     the lower  part is composed of wide guides which are ground and accurately hand scrapped, for a better sliding.       the upper part, is swivelable in the two directions, suitable for grinding tapered workpieces.    it includes  a micrometric device with centesimal dial gauge for taper control.       workhead  the structure in normalised, stabilised and well ribbed cast iron, allows to support the workpiece weight and the force generated by the grinding operation.      the spindle rotates on high precision ball bearings, guaranteeing restricted tolerance and maximum rigidity in the working.      the spindle rotation is by means of a three phase motor with variable speed controlled by an inverter.  internal grinding spindle carriage  the structure is composed of a carriage, where the internal grinding spindle is located.    the working feed, is obtained by a re-circulating ball screw and preloaded nut.    the screw movement is assured by a brushless motor.       the incremental optic rule guarantees a wheelhead positioning precision of 0,001 mm.   internal grinding spindle  as there are many and various types of internal grinding spindles, according to the diameters and lengths that need to be ground, the machine is supplied without an internal grinding spindle, so that the customer may select which type is more suitable for his job.      the machine is manufactured standard with a belt transmission suitable for diam. mm. 60, diam. mm. 80 and diam. mm. 100 internal grinding spindles.      on request,  high frequency spindles may be assembled.   wheelhead  for face grinding the structure is composed of a carriage, where the face grinding device is located.    the positioning is obtained by an hydraulic cylinder.   the diamond dressing device is assembled on the face grinding device casing.   manual feed handwheels  electronic type, with double selection of the increments division 0.1 - 0.01 and 0.001 mm.  for wheelhead and table movements.     diamond dresser  the internal diamond dressing device is very strong and is positioned on the table.     it starts  hydraulically, when the dressing operation is selected, by the operator.     the dressing operation may be carried out manually or in automatic cycle.    equipment and electrical plant  in a cooled cabinet, separate from the machine.      hydraulic plant   the hydraulic power pack, is separate from the machine and activates the hydraulic diamond dresser and face grinding device.       lubrication plant the lubrication power pack, is separate from the machine and supplies continuous oil to the wheelhead guides.   the recovered oil is filtered and then resent to the power pack.     the re-circulating ball screw nut for the working feed, is grease lubricated.           coolant plant  large capacity tank for the coolant water, complete with electric equipment.       equipped with coolant magnet cleaner  and coolant paper roll cleaner.       protections  for the protection of the operator all movable parts are covered with suitable guards.     precisely: protection casing for belts, protection casing for grinding wheel and bellows for guides.   the machine is completely closed and the front protection is a sheet sliding doors with poly-carbonate shields.   a safety device, does not permit the automatic cycle to start if the front sliding doors are open.   INTERNAL DIAMETER:250 MM
GRINDING DEPTH: MM
SWING DIAMETER:460 MM
WORKPIECE DIAMETER:455 (MAX.) MM
WORKPIECE LENGTH - MAX.:1000 MM
TABLE ROTATING:-4/+8 °
TABLE SPEEDS:0-4000 MM/MIN
MAX. WORKPIECE WEIGHT:80 KG
WORKHEAD - CENTER TAPER:5 MK
ROTATION SPEED OF WORKHEAD :0 - 400 1/MIN
WORKHEAD MOTOR:4 KW
3-JAW CHUCK:250 (SELBSTSCHLIEßEND) MM
GRINDING MOTOR:4 KW
COOLANT PUMP:2,2 KW
WEIGHT APPROX.:2,4 T
MACHINE DIMENSIONS:3200 X 2100 XX
CNC CONTROLLER:SIEMENS 840 D
SERVO MOTORS:
AUTOM. SENSING DEVICE FOR GRINDING WHEEL:OPTION
:
LINEAR SCALES AND BALLSCREW:IN ALLEN ACHSEN
GRINDING WHEEL DRESSER:
:
FULLY ENCLOSED:
:
TECHNICAL DOCUMENTATION IN GERMAN LANGUAGE:
CE-DESIGN:
SIGNAL LAMP:
FACE GRINDING ATTACHEMENT:DURCHMESSER 125 MM
CLAMPING CHUCK:250 (SELBSTSCHLIEßEND), 1 SATZ HARTE BACKEN, 1 SATZ WEICHE BACKEN, 1 SATZ INNEN MM
:
MAGNETIC AND PAPER FILTER :
LEVELLIG ELEMENTS:
FREQUENCY CONTROL MAIN SPINDEL ENGINE:FüR DIE INNENSCHLEIFEINRICHTUNG
INTERNAL GRINDING SPINDLE:RPM 28.000, DIAM. 60 MM. MIN. DIAM. CAP. 25 MM. X BOHRUNG 50 MM, MAX. DIAM. CAP. 100 MM. X BOHRUNG 115 MM .
INTERNAL GRINDING SPINDLE:RPM 10.000, DIAM. 100 MM, MIN. DIAM. CAP. 50 MM X BOHRUNG 100 MM, MAX.DIAM. CAP. 250 MM XBOHRUNG 220 MM
FIXED STEADY RESTS:10-100 MM, 100-170 MM

PERFORMANCE AND PRECISION DEGREE ROBBI GRINDING MACHINES ARE ACCORDING TO THE INTERNATIONAL PRECISION NORMES ISO 2433. THE TABLE MOVEMENT LINEARITY IS GUARANTEED BY A MAX. DEVIATION OF 0,002 MM/MT. THE OBTAINABLE GRINDING ROUNDNESS IS : 0,4M (**) (**) FOR A TEST WORKPIECE GROUND IN OUR FACTORY DURING MACHINE TESTING THE CNC CONTROLS : WHEEL HEAD MOVEMENT (AXIS X) LONGITUDINAL TABLE MOVEMENT (AXIS Z) WORK HEAD SPINDLE ROTATION SPEED THE AVAILABLE PROGRAMS PERMIT THE PROGRAMMING OF THE FOLLOWING GRINDING CYCLES PLUNGE CYLINDRICAL PASS CYLINDRICAL PASS WITH INTERPOLATION BETWEEN TABLE AND WHEEL MOVEMENT TO GRIND TAPER WORKPIECES RADIUS THE SOFTWARE FOR THE WORKPIECE GRINDING OPERATION IS VERY SIMPLE AND INTUITIVE. TO FACILITATE THE PROGRAMMING THE SOFTWARE IS EQUIPPED WITH AN EXEMPLIFYING GRAPHICS, TO INPUT THE DATA FOR EACH PARAMETER. THE SOFTWARE, HAS BEEN SPECIALLY STUDIED, SO AS TO PERMIT ALSO NON SPECIALISED OPERATORS TO PROGRAMME WITHOUT ANY PROBLEMS COMPLEX WORKPIECES. WHEN THE WORKPIECE GRINDING PROGRAMME HAS BEEN COMPLETED THE CNC WILL AUTOMATICALLY MAKE UP A SUMMARY LIST, WHERE ONLY THE GEOMETRIC PARAMETERS ARE EVIDENCED. THIS LIST PERMITS WITH A GLANCE TO VERIFY THE COMPLETE PROGRAMME; THIS OPERATION IS VERY HELPFUL TO VERIFY EVENTUAL INPUT DATA ERRORS OR TO CHECK RAPIDLY A WORKPIECE PROGRAMME WHEN RELOADED FROM THE FILE. WHILE THE PROGRAMME IS IN EXECUTION, IT IS POSSIBLE TO INTERVENE AND MODIFY IN REAL TIME THE TECHNOLOGIC PARAMETERS, SUCH AS: INCREMENTS, DWELL INVERSION TIMES, SPARKOUT PASSES. ALSO, IT IS POSSIBLE TO INTERVENE WITH THE JOG HANDWHEEL. THE GRINDING MACHINE IS COMPOSED OF : BASE STRUCTURE IN NORMALISED AND STABILISED CAST IRON WITH LARGE GROUND GUIDES. THE LUBRICATION PLANT SUPPLIES A CONSTANT OIL FLOW DISTRIBUTED OVER THE COMPLETE LENGTH OF THE GUIDES. IN THE MIDDLE OF THE BASE, THERE IS POSITIONED THE BALL SCREW FOR THE TABLE LONGITUDINAL MOVEMENT. ON ALL THE LOWER PART OF THE PERIMETER ARE SITUATED THE RECESSES FOR MACHINE LEVELLING. CONSIDERING THE BASE STRUCTURE, USUALLY A FOUNDATION IS NOT REQUIRED. TABLE THE TABLE IS MANUFACTURED IN TWO PARTS, BOTH ARE IN NORMALISED AND STABILISED CAST IRON. THE LOWER PART IS COMPOSED OF WIDE GUIDES WHICH ARE GROUND AND ACCURATELY HAND SCRAPPED, FOR A BETTER SLIDING. THE UPPER PART, IS SWIVELABLE IN THE TWO DIRECTIONS, SUITABLE FOR GRINDING TAPERED WORKPIECES. IT INCLUDES A MICROMETRIC DEVICE WITH CENTESIMAL DIAL GAUGE FOR TAPER CONTROL. WORKHEAD THE STRUCTURE IN NORMALISED, STABILISED AND WELL RIBBED CAST IRON, ALLOWS TO SUPPORT THE WORKPIECE WEIGHT AND THE FORCE GENERATED BY THE GRINDING OPERATION. THE SPINDLE ROTATES ON HIGH PRECISION BALL BEARINGS, GUARANTEEING RESTRICTED TOLERANCE AND MAXIMUM RIGIDITY IN THE WORKING. THE SPINDLE ROTATION IS BY MEANS OF A THREE PHASE MOTOR WITH VARIABLE SPEED CONTROLLED BY AN INVERTER. INTERNAL GRINDING SPINDLE CARRIAGE THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE INTERNAL GRINDING SPINDLE IS LOCATED. THE WORKING FEED, IS OBTAINED BY A RE-CIRCULATING BALL SCREW AND PRELOADED NUT. THE SCREW MOVEMENT IS ASSURED BY A BRUSHLESS MOTOR. THE INCREMENTAL OPTIC RULE GUARANTEES A WHEELHEAD POSITIONING PRECISION OF 0,001 MM. INTERNAL GRINDING SPINDLE AS THERE ARE MANY AND VARIOUS TYPES OF INTERNAL GRINDING SPINDLES, ACCORDING TO THE DIAMETERS AND LENGTHS THAT NEED TO BE GROUND, THE MACHINE IS SUPPLIED WITHOUT AN INTERNAL GRINDING SPINDLE, SO THAT THE CUSTOMER MAY SELECT WHICH TYPE IS MORE SUITABLE FOR HIS JOB. THE MACHINE IS MANUFACTURED STANDARD WITH A BELT TRANSMISSION SUITABLE FOR DIAM. MM. 60, DIAM. MM. 80 AND DIAM. MM. 100 INTERNAL GRINDING SPINDLES. ON REQUEST, HIGH FREQUENCY SPINDLES MAY BE ASSEMBLED. WHEELHEAD FOR FACE GRINDING THE STRUCTURE IS COMPOSED OF A CARRIAGE, WHERE THE FACE GRINDING DEVICE IS LOCATED. THE POSITIONING IS OBTAINED BY AN HYDRAULIC CYLINDER. THE DIAMOND DRESSING DEVICE IS ASSEMBLED ON THE FACE GRINDING DEVICE CASING. MANUAL FEED HANDWHEELS ELECTRONIC TYPE, WITH DOUBLE SELECTION OF THE INCREMENTS DIVISION 0.1 - 0.01 AND 0.001 MM. FOR WHEELHEAD AND TABLE MOVEMENTS. DIAMOND DRESSER THE INTERNAL DIAMOND DRESSING DEVICE IS VERY STRONG AND IS POSITIONED ON THE TABLE. IT STARTS HYDRAULICALLY, WHEN THE DRESSING OPERATION IS SELECTED, BY THE OPERATOR. THE DRESSING OPERATION MAY BE CARRIED OUT MANUALLY OR IN AUTOMATIC CYCLE. EQUIPMENT AND ELECTRICAL PLANT IN A COOLED CABINET, SEPARATE FROM THE MACHINE. HYDRAULIC PLANT THE HYDRAULIC POWER PACK, IS SEPARATE FROM THE MACHINE AND ACTIVATES THE HYDRAULIC DIAMOND DRESSER AND FACE GRINDING DEVICE. LUBRICATION PLANT THE LUBRICATION POWER PACK, IS SEPARATE FROM THE MACHINE AND SUPPLIES CONTINUOUS OIL TO THE WHEELHEAD GUIDES. THE RECOVERED OIL IS FILTERED AND THEN RESENT TO THE POWER PACK. THE RE-CIRCULATING BALL SCREW NUT FOR THE WORKING FEED, IS GREASE LUBRICATED. COOLANT PLANT LARGE CAPACITY TANK FOR THE COOLANT WATER, COMPLETE WITH ELECTRIC EQUIPMENT. EQUIPPED WITH COOLANT MAGNET CLEANER AND COOLANT PAPER ROLL CLEANER. PROTECTIONS FOR THE PROTECTION OF THE OPERATOR ALL MOVABLE PARTS ARE COVERED WITH SUITABLE GUARDS. PRECISELY: PROTECTION CASING FOR BELTS, PROTECTION CASING FOR GRINDING WHEEL AND BELLOWS FOR GUIDES. THE MACHINE IS COMPLETELY CLOSED AND THE FRONT PROTECTION IS A SHEET SLIDING DOORS WITH POLY-CARBONATE SHIELDS. A SAFETY DEVICE, DOES NOT PERMIT THE AUTOMATIC CYCLE TO START IF THE FRONT SLIDING DOORS ARE OPEN.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-7 spindles: 1 screw under table, set off 5.5 kw 2. spindle right, add 7.5 kw
3. spindle left, 11 kw
4. spindle right, 7.5 kw
5. spindle above 11 kw
6 spindle above 11 kw
7 spindle below 5.5 kw
2 st. planer heads centrolock 240 mm, 2 pcs planer heads centrolock 170 mm
1 st. fold cutter 160 x 17 x 40 mm
infeed table 1980 mm
waxilitpumpe
dust nozzle 8 x 140 mm
operating tool
working width (for flight circle ã? 140 mm) 20-230 mm
working height (for flight circle ã? 125 mm) 8-120 mm
power of the engine of the feed 2.2 kw / 3 hp
the spindle speed 6000 rpm
the spindles diameter 40 mm
tool air district 1 lower spindle min/max 125/180 mm
mould flight circuit vertical spindles left min/max 112/200 mm
mould flight circuit vertical spindle right min/max 112/250 mm
tool flight circle horizontal spindles above min/max 100/200 mm
tool flight circle horizontal spindles below min/max 100/250 mm
infinitely variable feed speed 6-36 m / min
the feed rollers diameter 140 mm 7 SPINDLES: 1 SCREW UNDER TABLE, SET OFF 5.5 KW 2. SPINDLE RIGHT, ADD 7.5 KW 3. SPINDLE LEFT, 11 KW 4. SPINDLE RIGHT, 7.5 KW 5. SPINDLE ABOVE 11 KW 6 SPINDLE ABOVE 11 KW 7 SPINDLE BELOW 5.5 KW 2 ST. PLANER HEADS CENTROLOCK 240 MM, 2 PCS PLANER HEADS CENTROLOCK 170 MM 1 ST. FOLD CUTTER 160 X 17 X 40 MM INFEED TABLE 1980 MM WAXILITPUMPE DUST NOZZLE 8 X 140 MM OPERATING TOOL WORKING WIDTH (FOR FLIGHT CIRCLE &ATILDE;? 140 MM) 20-230 MM WORKING HEIGHT (FOR FLIGHT CIRCLE &ATILDE;? 125 MM) 8-120 MM POWER OF THE ENGINE OF THE FEED 2.2 KW / 3 HP THE SPINDLE SPEED 6000 RPM THE SPINDLES DIAMETER 40 MM TOOL AIR DISTRICT 1 LOWER SPINDLE MIN/MAX 125/180 MM MOULD FLIGHT CIRCUIT VERTICAL SPINDLES LEFT MIN/MAX 112/200 MM MOULD FLIGHT CIRCUIT VERTICAL SPINDLE RIGHT MIN/MAX 112/250 MM TOOL FLIGHT CIRCLE HORIZONTAL SPINDLES ABOVE MIN/MAX 100/200 MM TOOL FLIGHT CIRCLE HORIZONTAL SPINDLES BELOW MIN/MAX 100/250 MM INFINITELY VARIABLE FEED SPEED 6-36 M / MIN THE FEED ROLLERS DIAMETER 140 MM
Vendedor: Wilhelm Bachmann GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 450 €
Ubicación: Land-weight approx.: 750 kg<br/>dimensions (l x w x h) approx.: 2600 x 850 x 1200 mm<br/>description: planer shaft with 2 blades, width 500 mm, table in total 2530 x 510 mm, fence swivelling, star delta connection, manual height-adjustment of the table, suction nozzle diameter 140 mm WEIGHT APPROX.: 750 KG
DIMENSIONS (L X W X H) APPROX.: 2600 X 850 X 1200 MM
DESCRIPTION: PLANER SHAFT WITH 2 BLADES, WIDTH 500 MM, TABLE IN TOTAL 2530 X 510 MM, FENCE SWIVELLING, STAR DELTA CONNECTION, MANUAL HEIGHT-ADJUSTMENT OF THE TABLE, SUCTION NOZZLE DIAMETER 140 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-23,4 kw, mta chiller air-cooled, type: special unit taeevo plus 121 p3-df
m.t.a. s.p.a..

special devices taeevo plus 121p3-df are air-cooled compact water chillers that are suitable for outdoor installation. including crankcase heater, phase monitoring, buffer tank 255 l and built-in p3 circulation pump, electronic expansion valve, 23,4 KW, MTA CHILLER AIR-COOLED, TYPE: SPECIAL UNIT TAEEVO PLUS 121 P3-DF M.T.A. S.P.A.. SPECIAL DEVICES TAEEVO PLUS 121P3-DF ARE AIR-COOLED COMPACT WATER CHILLERS THAT ARE SUITABLE FOR OUTDOOR INSTALLATION. INCLUDING CRANKCASE HEATER, PHASE MONITORING, BUFFER TANK 255 L AND BUILT-IN P3 CIRCULATION PUMP, ELECTRONIC EXPANSION VALVE, "DUALFREQUENCY" (50/60 HZ) AND HIGH AIR INLET TEMPERATURE-5 °C TO + 50 °C. COOLING CAPACITY KW 23.4 KALTWASSERTEMP. EXIT / ENTRY (°C): 7 / 12 FLOW RATE (M3/H) 4 AVAILABLE PUMP PRESSURE (BAR) 2.75 AMBIENT TEMPERATURE (°C) 32 REFRIGERANT R 134A ELECTRICAL DATA: VOLTAGE V 400, FREQUENCY HZ 50, STAGES OF PH 3 MAXIMUM POWER CONSUMPTION (KW) 13.4 MAX CURRENT (A) 24.9 STARTING CURRENT (A) 145,4 DISTRICT PROTECTION CLASS: IP54 DIMENSIONS: LENGTH (MM) 1862, 761 WIDTH (MM), HEIGHT (MM) 1437 WEIGHT (KG) 654 CONNECTION RP 1 1/2 " SERIAL NO.: 200327501 YEAR 2018 CONDITION: VISUALLY 2, TECHNICALLY OK, USED PRICE: ON REQUEST IN EURO (EXCL. VAT FROM NETTETAL), 3 MONTHS WARRANTY USED MACHINES CAN HAVE VISUAL DEFECTS DUE TO THEIR USE. (SUBJECT TO CHANGE AND PRIOR SALE RESERVED!) LOCATION: MTA GERMANY GMBH, 41334 NETTETAL CHILLER, WATER CHILLER, MTA
Vendedor: MTA Deutschland GmbH
Año de construcción: usado
Ubicación: Land-cnc working centre\r\nbrand: weeke\r\ntype: bhp 200 vantage 510\r\nfunction checked\r\nyear: 2013\r\n\r\ntechnical data:\r\nsolid machine frame in rigid trasversing gantry execution \r\n\r\ntravel range of the axes\r\n- x = 3100 mm\r\n- y = 1550 mm\r\n- z = 100 mm\r\n\r\nvector speed\r\n- x/y = 105 m/min\r\n- z =  20 m/min \r\n\r\nworking table\r\nthe working field can be accessed with all processing units without restriction.\r\nworking table length: 3100 mm\r\nworking table width: 1550 mm\r\nmax. workpiece thickness: 100 mm\r\n- 2 vacuum generators with a total vacuum capacity of 600/720 m3/h, 50/60 hz\r\n- 4 pneumatically lowerable workpiece stops incl. electr. surveillance of lower cylinder position\r\n\r\nf1-hsk63-9 kw (milling spindle)\r\ntool holder hsk63\r\ndirection of rotation right hand / left hand\r\nspeed 1,250 - 24,000 1/min stepless programmable\r\nmax. capacity at the tool up to 7.5/9 kw in continuous and intermittent operation\r\nspindle lubrication permanent grease lubrication\r\ncooling: air cooled\r\nrigid 4-fold blowing nozzle, programm controlled\r\n\r\nsurcharge change plate magazine 14 places, rear\r\ntool diameter:\r\n- max. 130 mm when equipping with 14 tools\r\n- max. 260 mm when using tools with small diameters in the next magazine places or with empty places besides    \r\n\r\nprogram-controlled extraction connection\r\nby means of program-controlled assignment the main connection nozzle is assigned to the processing unit. \r\n\r\npowercontrol (modern control system):\r\n- operating system windows xp \r\n- 17 inches tft-flat screen \r\n- ethernet connection 10/100 mbit \r\n- ups for the pc \r\n\r\npowercontrol software package with graphical operating programs: \r\n- woodwop 6.1 for graphical, dialogue-oriented generation of cnc-programs     \r\n\r\nconfiguration\r\nv12 high speed 7500\r\nvertical drilling block with 12 spindles (separately activated with infinitely program- controlled high speed range).\r\nz-direction 60 mm\r\ndrilling depth max. 38 mm (up to 55 mm for special borers)\r\ndirection of rotation right hand/left hand\r\nspeed 1.500 - 7.500 1/min frequency-controlled\r\nshaft diameter 10 mm\r\ntotal length of drill 70 mm\r\ndrilling diameter max. 35 mm\r\ndistance between spindles 32 mm\r\n \r\nmatrix-table pro \r\nsystem matrix pro with grid grooves for clamping of templates or workpieces. grid grooves for inlaying of a rubber sealing. \r\n\r\nplant lifting table\r\nplatform 3700 x 1550 mm\r\ncapacity load 3500 kg\r\nconstruction height 440 mm\r\neffective stroke 600 mm\r\nstack height 480 mm \r\n\r\nsurcharge for air cushion function\r\ngenerating of an air cushion under the board. \r\n\r\ncenter table for handling of boards\r\nthis handling center table is at table level. here the raw boards can be manually pre-positioned so that these can be taken over by the vacuum arm. \r\n\r\npneumatically lowerable stop fence front\r\n\r\npneumatically lowerable stop fence rear\r\n\r\nvacuum arm for positioning of raw boards\r\nvacuum arm for automatic positioning of the raw board against the pneumatically retractable stop guide.\r\n\r\npush-off device incl. dust extraction for cover board and workpiece \r\n\r\ndust extraction channel at the outfeed from below, 1550 mm\r\nfor cleaning of the workpieces during feeding  out\r\n\r\ntransport belt 4.050 x 1.550 mm\r\n\r\naggregate interface main spindle 360° axis\r\n\r\nsimultaneous push-off and infeed for nesting\r\n\r\nfeeding of lifting table during nesting processing\r\n\r\nroller type prepositioning table\r\n\r\npush-off device incl. dust extraction for cover board and workpiece\r\n\r\ntool length control \r\nsuitable for length measuring of shaft tools\r\n\r\n2 complete terminal (moveable terminal)\r\nconsisting of:\r\n- moveable label terminal (10 m + 12 m) \r\n\r\n - a pica label printer with cut off device (ethernet), resolution 300 dpi, with  configurated label roll (label size 80x80 mm) \r\n\r\nnote:\r\nthe specifications and descriptions are a copy of the order confirmation at that time. datas are for information and are not binding.\r\n CNC WORKING CENTRE\R\NBRAND: WEEKE\R\NTYPE: BHP 200 VANTAGE 510\R\NFUNCTION CHECKED\R\NYEAR: 2013\R\N\R\NTECHNICAL DATA:\R\NSOLID MACHINE FRAME IN RIGID TRASVERSING GANTRY EXECUTION \R\N\R\NTRAVEL RANGE OF THE AXES\R\N- X = 3100 MM\R\N- Y = 1550 MM\R\N- Z = 100 MM\R\N\R\NVECTOR SPEED\R\N- X/Y = 105 M/MIN\R\N- Z = 20 M/MIN \R\N\R\NWORKING TABLE\R\NTHE WORKING FIELD CAN BE ACCESSED WITH ALL PROCESSING UNITS WITHOUT RESTRICTION.\R\NWORKING TABLE LENGTH: 3100 MM\R\NWORKING TABLE WIDTH: 1550 MM\R\NMAX. WORKPIECE THICKNESS: 100 MM\R\N- 2 VACUUM GENERATORS WITH A TOTAL VACUUM CAPACITY OF 600/720 M3/H, 50/60 HZ\R\N- 4 PNEUMATICALLY LOWERABLE WORKPIECE STOPS INCL. ELECTR. SURVEILLANCE OF LOWER CYLINDER POSITION\R\N\R\NF1-HSK63-9 KW (MILLING SPINDLE)\R\NTOOL HOLDER HSK63\R\NDIRECTION OF ROTATION RIGHT HAND / LEFT HAND\R\NSPEED 1,250 - 24,000 1/MIN STEPLESS PROGRAMMABLE\R\NMAX. CAPACITY AT THE TOOL UP TO 7.5/9 KW IN CONTINUOUS AND INTERMITTENT OPERATION\R\NSPINDLE LUBRICATION PERMANENT GREASE LUBRICATION\R\NCOOLING: AIR COOLED\R\NRIGID 4-FOLD BLOWING NOZZLE, PROGRAMM CONTROLLED\R\N\R\NSURCHARGE CHANGE PLATE MAGAZINE 14 PLACES, REAR\R\NTOOL DIAMETER:\R\N- MAX. 130 MM WHEN EQUIPPING WITH 14 TOOLS\R\N- MAX. 260 MM WHEN USING TOOLS WITH SMALL DIAMETERS IN THE NEXT MAGAZINE PLACES OR WITH EMPTY PLACES BESIDES \R\N\R\NPROGRAM-CONTROLLED EXTRACTION CONNECTION\R\NBY MEANS OF PROGRAM-CONTROLLED ASSIGNMENT THE MAIN CONNECTION NOZZLE IS ASSIGNED TO THE PROCESSING UNIT. \R\N\R\NPOWERCONTROL (MODERN CONTROL SYSTEM):\R\N- OPERATING SYSTEM WINDOWS XP \R\N- 17 INCHES TFT-FLAT SCREEN \R\N- ETHERNET CONNECTION 10/100 MBIT \R\N- UPS FOR THE PC \R\N\R\NPOWERCONTROL SOFTWARE PACKAGE WITH GRAPHICAL OPERATING PROGRAMS: \R\N- WOODWOP 6.1 FOR GRAPHICAL, DIALOGUE-ORIENTED GENERATION OF CNC-PROGRAMS \R\N\R\NCONFIGURATION\R\NV12 HIGH SPEED 7500\R\NVERTICAL DRILLING BLOCK WITH 12 SPINDLES (SEPARATELY ACTIVATED WITH INFINITELY PROGRAM- CONTROLLED HIGH SPEED RANGE).\R\NZ-DIRECTION 60 MM\R\NDRILLING DEPTH MAX. 38 MM (UP TO 55 MM FOR SPECIAL BORERS)\R\NDIRECTION OF ROTATION RIGHT HAND/LEFT HAND\R\NSPEED 1.500 - 7.500 1/MIN FREQUENCY-CONTROLLED\R\NSHAFT DIAMETER 10 MM\R\NTOTAL LENGTH OF DRILL 70 MM\R\NDRILLING DIAMETER MAX. 35 MM\R\NDISTANCE BETWEEN SPINDLES 32 MM\R\N \R\NMATRIX-TABLE PRO \R\NSYSTEM MATRIX PRO WITH GRID GROOVES FOR CLAMPING OF TEMPLATES OR WORKPIECES. GRID GROOVES FOR INLAYING OF A RUBBER SEALING. \R\N\R\NPLANT LIFTING TABLE\R\NPLATFORM 3700 X 1550 MM\R\NCAPACITY LOAD 3500 KG\R\NCONSTRUCTION HEIGHT 440 MM\R\NEFFECTIVE STROKE 600 MM\R\NSTACK HEIGHT 480 MM \R\N\R\NSURCHARGE FOR AIR CUSHION FUNCTION\R\NGENERATING OF AN AIR CUSHION UNDER THE BOARD. \R\N\R\NCENTER TABLE FOR HANDLING OF BOARDS\R\NTHIS HANDLING CENTER TABLE IS AT TABLE LEVEL. HERE THE RAW BOARDS CAN BE MANUALLY PRE-POSITIONED SO THAT THESE CAN BE TAKEN OVER BY THE VACUUM ARM. \R\N\R\NPNEUMATICALLY LOWERABLE STOP FENCE FRONT\R\N\R\NPNEUMATICALLY LOWERABLE STOP FENCE REAR\R\N\R\NVACUUM ARM FOR POSITIONING OF RAW BOARDS\R\NVACUUM ARM FOR AUTOMATIC POSITIONING OF THE RAW BOARD AGAINST THE PNEUMATICALLY RETRACTABLE STOP GUIDE.\R\N\R\NPUSH-OFF DEVICE INCL. DUST EXTRACTION FOR COVER BOARD AND WORKPIECE \R\N\R\NDUST EXTRACTION CHANNEL AT THE OUTFEED FROM BELOW, 1550 MM\R\NFOR CLEANING OF THE WORKPIECES DURING FEEDING OUT\R\N\R\NTRANSPORT BELT 4.050 X 1.550 MM\R\N\R\NAGGREGATE INTERFACE MAIN SPINDLE 360° AXIS\R\N\R\NSIMULTANEOUS PUSH-OFF AND INFEED FOR NESTING\R\N\R\NFEEDING OF LIFTING TABLE DURING NESTING PROCESSING\R\N\R\NROLLER TYPE PREPOSITIONING TABLE\R\N\R\NPUSH-OFF DEVICE INCL. DUST EXTRACTION FOR COVER BOARD AND WORKPIECE\R\N\R\NTOOL LENGTH CONTROL \R\NSUITABLE FOR LENGTH MEASURING OF SHAFT TOOLS\R\N\R\N2 COMPLETE TERMINAL (MOVEABLE TERMINAL)\R\NCONSISTING OF:\R\N- MOVEABLE LABEL TERMINAL (10 M + 12 M) \R\N\R\N - A PICA LABEL PRINTER WITH CUT OFF DEVICE (ETHERNET), RESOLUTION 300 DPI, WITH CONFIGURATED LABEL ROLL (LABEL SIZE 80X80 MM) \R\N\R\NNOTE:\R\NTHE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATAS ARE FOR INFORMATION AND ARE NOT BINDING.\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-strickler spindle moulder with elu 3 roller feed STRICKLER SPINDLE MOULDER WITH ELU 3 ROLLER FEED
Vendedor: Ralph Rosenthal Maschinenlager
Año de construcción: usado
Precio: 18.500 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-  number  4  machines    diam. 18 NUMBER 4 MACHINES DIAM. 18" AGHI 852 FINEZZA 15 YEAR 2007 NUMBER 4 MACHINES DIAM. 20" AGHI 948 FINEZZA 15 YEAR 2007
Vendedor: SERVICES FOR INDUSTRY SAGL
Año de construcción: usado
Ubicación: Land-manufacturer: hüllhorst, year: 1995, type: kls 430, control: ferrocontroll, program: 250, cutting depth mm: 120, working hight mm: 60, holz-querschnitte mm: yes, positioniergenauigkeit mm: +45-45, feeding speed max m/min: 3800 kann verlängert werden, feeding speed continous adjustable: ca.4, slewing range degrees: yes, work piece length max mm: no, wood lenght max mm: 500, loading stations: 5000, strichcodierung: yes, saw blade diameter mm: 8, length to slide in mm: yes, spindles: yes, drill head vertical controlled spindles: yes, exhaust diameter mm: yes,  machine ready for demonstration: zusätzlich 90 grad sägestation und etikettendrucker, year :1995 MANUFACTURER: HüLLHORST, YEAR: 1995, TYPE: KLS 430, CONTROL: FERROCONTROLL, PROGRAM: 250, CUTTING DEPTH MM: 120, WORKING HIGHT MM: 60, HOLZ-QUERSCHNITTE MM: YES, POSITIONIERGENAUIGKEIT MM: +45-45, FEEDING SPEED MAX M/MIN: 3800 KANN VERLäNGERT WERDEN, FEEDING SPEED CONTINOUS ADJUSTABLE: CA.4, SLEWING RANGE DEGREES: YES, WORK PIECE LENGTH MAX MM: NO, WOOD LENGHT MAX MM: 500, LOADING STATIONS: 5000, STRICHCODIERUNG: YES, SAW BLADE DIAMETER MM: 8, LENGTH TO SLIDE IN MM: YES, SPINDLES: YES, DRILL HEAD VERTICAL CONTROLLED SPINDLES: YES, EXHAUST DIAMETER MM: YES, MACHINE READY FOR DEMONSTRATION: ZUSäTZLICH 90 GRAD SäGESTATION UND ETIKETTENDRUCKER, YEAR :1995
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-stream delivery steel sak-56; good condition; format 56x45cm; height-adjustable; speed adjustable.

we are pleased at this point the note that all offered machines are in our unrestricted ownership or access and are available in our warehouse.

tours and demonstrations are possible by appointment at our premises.

gladly we inform you also about our complete inventory because only a portion of our portfolio is represented.
 STREAM DELIVERY STEEL SAK-56; GOOD CONDITION; FORMAT 56X45CM; HEIGHT-ADJUSTABLE; SPEED ADJUSTABLE. WE ARE PLEASED AT THIS POINT THE NOTE THAT ALL OFFERED MACHINES ARE IN OUR UNRESTRICTED OWNERSHIP OR ACCESS AND ARE AVAILABLE IN OUR WAREHOUSE. TOURS AND DEMONSTRATIONS ARE POSSIBLE BY APPOINTMENT AT OUR PREMISES. GLADLY WE INFORM YOU ALSO ABOUT OUR COMPLETE INVENTORY BECAUSE ONLY A PORTION OF OUR PORTFOLIO IS REPRESENTED.
Vendedor: Joachim Ethner Handelsvertretungen
Año de construcción: usado
Ubicación: Land-manufacturer: dimter, year: 1999, type: opticut 104l, program: yes, cutting depth mm: 300, working hight mm: 150, positioning accuracy mm: 1,0, feeding speed max m/min: 150, feeding speed continous adjustable: yes, work piece length max mm: 6000, kw output saw motor: 7,5, loading stations: 1, strichcodierung: yes, saw blade diameter mm: 450, optimisation: yes, outfeeding stations: 10, compressed air bar: 6, year :1999 MANUFACTURER: DIMTER, YEAR: 1999, TYPE: OPTICUT 104L, PROGRAM: YES, CUTTING DEPTH MM: 300, WORKING HIGHT MM: 150, POSITIONING ACCURACY MM: 1,0, FEEDING SPEED MAX M/MIN: 150, FEEDING SPEED CONTINOUS ADJUSTABLE: YES, WORK PIECE LENGTH MAX MM: 6000, KW OUTPUT SAW MOTOR: 7,5, LOADING STATIONS: 1, STRICHCODIERUNG: YES, SAW BLADE DIAMETER MM: 450, OPTIMISATION: YES, OUTFEEDING STATIONS: 10, COMPRESSED AIR BAR: 6, YEAR :1999
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-stream delivery guk s-520; good condition; working width 520 mm; height-adjustable; can be networked with guk folding machines; cleaned and checked for function; new belt.

we are pleased at this point the note that all offered machines are in our unrestricted ownership or access and are available in our warehouse.

tours and demonstrations are possible by appointment at our premises.

gladly we inform you also about our complete inventory because only a portion of our portfolio is represented.
 STREAM DELIVERY GUK S-520; GOOD CONDITION; WORKING WIDTH 520 MM; HEIGHT-ADJUSTABLE; CAN BE NETWORKED WITH GUK FOLDING MACHINES; CLEANED AND CHECKED FOR FUNCTION; NEW BELT. WE ARE PLEASED AT THIS POINT THE NOTE THAT ALL OFFERED MACHINES ARE IN OUR UNRESTRICTED OWNERSHIP OR ACCESS AND ARE AVAILABLE IN OUR WAREHOUSE. TOURS AND DEMONSTRATIONS ARE POSSIBLE BY APPOINTMENT AT OUR PREMISES. GLADLY WE INFORM YOU ALSO ABOUT OUR COMPLETE INVENTORY BECAUSE ONLY A PORTION OF OUR PORTFOLIO IS REPRESENTED.
Vendedor: Joachim Ethner Handelsvertretungen
Año de construcción: usado
Ubicación: Land-manufacturer: paul, year: 2008, type: modell push cut cx 205-c6, control: volloptimierung , program: paul, cutting depth mm: 80 - 140(400), working hight mm: 18 - 140(160), wood cross-sections mm: 140 x 140, nutzlängenschieber mm: 4800, feeding speed max m/min: yes, wood lenght max mm: 700-4750, strichcodierung: yes, saw blade diameter mm: 600, outfeeding stations: 1, compressed air bar: 6, overhauled on: automatischer riemenozug, year :2008 MANUFACTURER: PAUL, YEAR: 2008, TYPE: MODELL PUSH CUT CX 205-C6, CONTROL: VOLLOPTIMIERUNG , PROGRAM: PAUL, CUTTING DEPTH MM: 80 - 140(400), WORKING HIGHT MM: 18 - 140(160), WOOD CROSS-SECTIONS MM: 140 X 140, NUTZL&AUML;NGENSCHIEBER MM: 4800, FEEDING SPEED MAX M/MIN: YES, WOOD LENGHT MAX MM: 700-4750, STRICHCODIERUNG: YES, SAW BLADE DIAMETER MM: 600, OUTFEEDING STATIONS: 1, COMPRESSED AIR BAR: 6, OVERHAULED ON: AUTOMATISCHER RIEMENOZUG, YEAR :2008
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-investors pfannkuch asb 380 kl; good condition; cleaned and checked. new belt installed; max. einlegebreite 310mm, min. 47mm; max. material thickness 8 mm. max speed 115m / min.; stand-alone mobile; there are 2 machines available.

we are pleased at this point the note that all offered machines are in our unrestricted ownership or access and are available in our warehouse.

tours and demonstrations are possible by appointment at our premises.

gladly we inform you also about our complete inventory because only a portion of our portfolio is represented.
 INVESTORS PFANNKUCH ASB 380 KL; GOOD CONDITION; CLEANED AND CHECKED. NEW BELT INSTALLED; MAX. EINLEGEBREITE 310MM, MIN. 47MM; MAX. MATERIAL THICKNESS 8 MM. MAX SPEED 115M / MIN.; STAND-ALONE MOBILE; THERE ARE 2 MACHINES AVAILABLE. WE ARE PLEASED AT THIS POINT THE NOTE THAT ALL OFFERED MACHINES ARE IN OUR UNRESTRICTED OWNERSHIP OR ACCESS AND ARE AVAILABLE IN OUR WAREHOUSE. TOURS AND DEMONSTRATIONS ARE POSSIBLE BY APPOINTMENT AT OUR PREMISES. GLADLY WE INFORM YOU ALSO ABOUT OUR COMPLETE INVENTORY BECAUSE ONLY A PORTION OF OUR PORTFOLIO IS REPRESENTED.
Vendedor: Joachim Ethner Handelsvertretungen
Año de construcción: usado
Ubicación: Land-manufacturer: josting , type: qfs 800, year: ca.90, cross cutting guillotine: yes, cutting lenght mm: 2800, strip width max mm: 800, alignment light: yes, motor-driven kinfe beam: yes, pressure beam: yes, required space l x w x h mm: 5000 x 1200 x1600, wight approx. kg: 2000, free text: mit automascher längenerkennung über luminizenkamera/über kreidestriche, year :ca.90 MANUFACTURER: JOSTING , TYPE: QFS 800, YEAR: CA.90, CROSS CUTTING GUILLOTINE: YES, CUTTING LENGHT MM: 2800, STRIP WIDTH MAX MM: 800, ALIGNMENT LIGHT: YES, MOTOR-DRIVEN KINFE BEAM: YES, PRESSURE BEAM: YES, REQUIRED SPACE L X W X H MM: 5000 X 1200 X1600, WIGHT APPROX. KG: 2000, FREE TEXT: MIT AUTOMASCHER L&AUML;NGENERKENNUNG &UUML;BER LUMINIZENKAMERA/&UUML;BER KREIDESTRICHE, YEAR :CA.90
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-block size press mã¼ro 5000/a4 wt; stand device; good condition; cleaned and checked. 1 x tumble dryer new; stack boost for small stack; heat deflector; max. einlegehã¶he 540mm; max. einlegebreite 350mm; paper cutter with a frame.

we are pleased at this point the note that all offered machines are in our unrestricted ownership or access and are available in our warehouse.

tours and demonstrations are possible by appointment at our premises.

gladly we inform you also about our complete inventory because only a portion of our portfolio is represented.
 BLOCK SIZE PRESS M&ATILDE;&FRAC14;RO 5000/A4 WT; STAND DEVICE; GOOD CONDITION; CLEANED AND CHECKED. 1 X TUMBLE DRYER NEW; STACK BOOST FOR SMALL STACK; HEAT DEFLECTOR; MAX. EINLEGEH&ATILDE;&PARA;HE 540MM; MAX. EINLEGEBREITE 350MM; PAPER CUTTER WITH A FRAME. WE ARE PLEASED AT THIS POINT THE NOTE THAT ALL OFFERED MACHINES ARE IN OUR UNRESTRICTED OWNERSHIP OR ACCESS AND ARE AVAILABLE IN OUR WAREHOUSE. TOURS AND DEMONSTRATIONS ARE POSSIBLE BY APPOINTMENT AT OUR PREMISES. GLADLY WE INFORM YOU ALSO ABOUT OUR COMPLETE INVENTORY BECAUSE ONLY A PORTION OF OUR PORTFOLIO IS REPRESENTED.
Vendedor: Joachim Ethner Handelsvertretungen
Año de construcción: usado
Ubicación: Land-manufacturer: dimter, year: 2000, type: opticut 704 r, cutting depth mm: 250, working hight mm: 100, wood cross-sections mm: 250x30/100x100, effective length slider mm: 6000, feeding speed continous adjustable: yes, work piece length max mm: 6000, loading stations: yes, strichcodierung: yes, saw blade diameter mm: 550, optimisation: yes, exhaust diameter mm: 21 kw, required space l x w x h mm: l = 6.000, wight approx. kg: 4200, year :2000 MANUFACTURER: DIMTER, YEAR: 2000, TYPE: OPTICUT 704 R, CUTTING DEPTH MM: 250, WORKING HIGHT MM: 100, WOOD CROSS-SECTIONS MM: 250X30/100X100, EFFECTIVE LENGTH SLIDER MM: 6000, FEEDING SPEED CONTINOUS ADJUSTABLE: YES, WORK PIECE LENGTH MAX MM: 6000, LOADING STATIONS: YES, STRICHCODIERUNG: YES, SAW BLADE DIAMETER MM: 550, OPTIMISATION: YES, EXHAUST DIAMETER MM: 21 KW, REQUIRED SPACE L X W X H MM: L = 6.000, WIGHT APPROX. KG: 4200, YEAR :2000
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-mig/mag/tig welding machine castolin eutectic

power: 500 amps.
 	 
mig / mag system: transmodul msg i.
wire feed speed: 0-18 m / min.
pulse driver: tm 19
 	 
tig attachment: transmodul tig i.
pulse driver: tm 20
 	 
district cooling: cooling-1
equipped with:
	-mig / mag hose package
 	-tig hose package
 	 
supply: 380 volts
country of origin: france
machine weight: 750 kg
machine lxwxh: 170 x 70 x 150 cm MIG/MAG/TIG WELDING MACHINE CASTOLIN EUTECTIC POWER: 500 AMPS. MIG / MAG SYSTEM: TRANSMODUL MSG I. WIRE FEED SPEED: 0-18 M / MIN. PULSE DRIVER: TM 19 TIG ATTACHMENT: TRANSMODUL TIG I. PULSE DRIVER: TM 20 DISTRICT COOLING: COOLING-1 EQUIPPED WITH: -MIG / MAG HOSE PACKAGE -TIG HOSE PACKAGE SUPPLY: 380 VOLTS COUNTRY OF ORIGIN: FRANCE MACHINE WEIGHT: 750 KG MACHINE LXWXH: 170 X 70 X 150 CM
Vendedor: Valk Machines B.V.
Año de construcción: usado
Ubicación: Land-saw-blade dia.: 600 mm<br/>cutting height: 165 mm<br/>motor output: 5,5 kw<br/>control: ja <br/><br/><br/><br/><br/> SAW-BLADE DIA.: 600 MM
CUTTING HEIGHT: 165 MM
MOTOR OUTPUT: 5,5 KW
CONTROL: JA




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-vicount 3 pb bt; demonstration machine; tabletop; strip margin, max. counting speed 2500 rpm; max. stacking height 220 mm; suitable for various types of paper from 25 g / m2; table size 600x400mm.

we are pleased at this point the note that all offered machines are in our unrestricted ownership or access and are available in our warehouse.

tours and demonstrations are possible by appointment at our premises.

gladly we inform you also about our complete inventory because only a portion of our portfolio is represented.
 VICOUNT 3 PB BT; DEMONSTRATION MACHINE; TABLETOP; STRIP MARGIN, MAX. COUNTING SPEED 2500 RPM; MAX. STACKING HEIGHT 220 MM; SUITABLE FOR VARIOUS TYPES OF PAPER FROM 25 G / M2; TABLE SIZE 600X400MM. WE ARE PLEASED AT THIS POINT THE NOTE THAT ALL OFFERED MACHINES ARE IN OUR UNRESTRICTED OWNERSHIP OR ACCESS AND ARE AVAILABLE IN OUR WAREHOUSE. TOURS AND DEMONSTRATIONS ARE POSSIBLE BY APPOINTMENT AT OUR PREMISES. GLADLY WE INFORM YOU ALSO ABOUT OUR COMPLETE INVENTORY BECAUSE ONLY A PORTION OF OUR PORTFOLIO IS REPRESENTED.
Vendedor: Joachim Ethner Handelsvertretungen
Año de construcción: usado
Ubicación: Land-2 x generators for sale. mtu 850 kw/el.
engine: mtu 12v 4000 (pg1) diesel aggregat.leistung 1320 kw. 1500 rpm.
year 2009 approximately 10500 hours of operation. overhaul before approx. 1000 hours of operation. generator leroy somer lsam 50.2vl1 performance. 1062 kva 50 hz. 850 kw. container: 40 ft. container incl. 1000 ltr. tank. muffler, radiator, siemens control, equipment certificate of gl (germanischer lloyd) emissions certificate.
maintenance carried out strictly according to the manufacturer. 2 X GENERATORS FOR SALE. MTU 850 KW/EL. ENGINE: MTU 12V 4000 (PG1) DIESEL AGGREGAT.LEISTUNG 1320 KW. 1500 RPM. YEAR 2009 APPROXIMATELY 10500 HOURS OF OPERATION. OVERHAUL BEFORE APPROX. 1000 HOURS OF OPERATION. GENERATOR LEROY SOMER LSAM 50.2VL1 PERFORMANCE. 1062 KVA 50 HZ. 850 KW. CONTAINER: 40 FT. CONTAINER INCL. 1000 LTR. TANK. MUFFLER, RADIATOR, SIEMENS CONTROL, EQUIPMENT CERTIFICATE OF GL (GERMANISCHER LLOYD) EMISSIONS CERTIFICATE. MAINTENANCE CARRIED OUT STRICTLY ACCORDING TO THE MANUFACTURER.
Vendedor: Autohaus Alberding
Año de construcción: usado
Ubicación: Land-number 30 machines  completed  alimentation elastam btsr and  number 2 pyf              cylinder  number  4   -   aghi  400 NUMBER 30 MACHINES COMPLETED ALIMENTATION ELASTAM BTSR AND NUMBER 2 PYF CYLINDER NUMBER 4 - AGHI 400
Vendedor: SERVICES FOR INDUSTRY SAGL
Año de construcción: usado
Ubicación: Land-chip conveyor; min. bulk height 1, 40 m, max.ca. 2, 10 m; speed adjustable; conveyor width 310 mm; new band was installed.

we are pleased at this point the note that all offered machines are in our unrestricted ownership or access and are available in our warehouse.

tours and demonstrations are possible by appointment at our premises.

gladly we inform you also about our complete inventory because only a portion of our portfolio is represented. CHIP CONVEYOR; MIN. BULK HEIGHT 1, 40 M, MAX.CA. 2, 10 M; SPEED ADJUSTABLE; CONVEYOR WIDTH 310 MM; NEW BAND WAS INSTALLED. WE ARE PLEASED AT THIS POINT THE NOTE THAT ALL OFFERED MACHINES ARE IN OUR UNRESTRICTED OWNERSHIP OR ACCESS AND ARE AVAILABLE IN OUR WAREHOUSE. TOURS AND DEMONSTRATIONS ARE POSSIBLE BY APPOINTMENT AT OUR PREMISES. GLADLY WE INFORM YOU ALSO ABOUT OUR COMPLETE INVENTORY BECAUSE ONLY A PORTION OF OUR PORTFOLIO IS REPRESENTED.
Vendedor: Joachim Ethner Handelsvertretungen
Año de construcción: usado
Ubicación: Land--producer: vojus a.s. považská bystrica

technical parameters:
- spindle diameter: 10 mm
- max. diameter of machined piece: 400 mm
- max. turning diameters 600 mm at universal and 350 above base
- distance between spikes: 1800 mm

control system: turn tec. -PRODUCER: VOJUS A.S. POVAžSKá BYSTRICA TECHNICAL PARAMETERS: - SPINDLE DIAMETER: 10 MM - MAX. DIAMETER OF MACHINED PIECE: 400 MM - MAX. TURNING DIAMETERS 600 MM AT UNIVERSAL AND 350 ABOVE BASE - DISTANCE BETWEEN SPIKES: 1800 MM CONTROL SYSTEM: TURN TEC.
Vendedor: BASTA machinery
Año de construcción: usado
Ubicación: Land-zirkon model supra 660 heatset webpress
4 color
year: 1990
cutoff: 452mm
max speed: 42.000 p/h

(1) enkel reel stand with reel travers
1 infeed with web guide control
4 zirkon printing-units with baldwin alcohol damping and baldwin blanketwashing
1 dryer meg sigma plus year: 1997
1 chillstand with webguide and silicon
1 jimek perforater unit
1 superstructure with turnerbars and slitting knives
2 zirkon folders with one chopper folder and one double chopper
1 planatol gluing system even crossgluing
1 quadtech rgs 4 register controll
1 quadtech cutoff control
2 gämmerler trimming rs 92
2 gämmerler bumpturn
1 ivt tempcontrol ink vibrator, chill roller, alcohol mixer
1 ivt ink distrubition with 4 pumps for ink container connection
2 color control pults remote ink
1 machine controll pult

1 plate bench and puncher

full documention: electrical,mechanical other manuals and floor plans.

perfect for 8 page a4 or 16 page a5!
single production or double production 4 page a4 or 8 page a5.

the machine is dismantled and carefully packed and loaded on pallets  under strict supervision and was intended to be reinstalled by the same owner.

it comes with extra new consumble parts, such as new ink rollers, new impression cilinder in crate, etc.

this machine printed top solids, can send print samples before shot down. very attractive price!

we ship worldwide.       ZIRKON MODEL SUPRA 660 HEATSET WEBPRESS 4 COLOR YEAR: 1990 CUTOFF: 452MM MAX SPEED: 42.000 P/H (1) ENKEL REEL STAND WITH REEL TRAVERS 1 INFEED WITH WEB GUIDE CONTROL 4 ZIRKON PRINTING-UNITS WITH BALDWIN ALCOHOL DAMPING AND BALDWIN BLANKETWASHING 1 DRYER MEG SIGMA PLUS YEAR: 1997 1 CHILLSTAND WITH WEBGUIDE AND SILICON 1 JIMEK PERFORATER UNIT 1 SUPERSTRUCTURE WITH TURNERBARS AND SLITTING KNIVES 2 ZIRKON FOLDERS WITH ONE CHOPPER FOLDER AND ONE DOUBLE CHOPPER 1 PLANATOL GLUING SYSTEM EVEN CROSSGLUING 1 QUADTECH RGS 4 REGISTER CONTROLL 1 QUADTECH CUTOFF CONTROL 2 GäMMERLER TRIMMING RS 92 2 GäMMERLER BUMPTURN 1 IVT TEMPCONTROL INK VIBRATOR, CHILL ROLLER, ALCOHOL MIXER 1 IVT INK DISTRUBITION WITH 4 PUMPS FOR INK CONTAINER CONNECTION 2 COLOR CONTROL PULTS REMOTE INK 1 MACHINE CONTROLL PULT 1 PLATE BENCH AND PUNCHER FULL DOCUMENTION: ELECTRICAL,MECHANICAL OTHER MANUALS AND FLOOR PLANS. PERFECT FOR 8 PAGE A4 OR 16 PAGE A5! SINGLE PRODUCTION OR DOUBLE PRODUCTION 4 PAGE A4 OR 8 PAGE A5. THE MACHINE IS DISMANTLED AND CAREFULLY PACKED AND LOADED ON PALLETS UNDER STRICT SUPERVISION AND WAS INTENDED TO BE REINSTALLED BY THE SAME OWNER. IT COMES WITH EXTRA NEW CONSUMBLE PARTS, SUCH AS NEW INK ROLLERS, NEW IMPRESSION CILINDER IN CRATE, ETC. THIS MACHINE PRINTED TOP SOLIDS, CAN SEND PRINT SAMPLES BEFORE SHOT DOWN. VERY ATTRACTIVE PRICE! WE SHIP WORLDWIDE.
Vendedor: TISKSTROJ - CORUM
Año de construcción: usado
Ubicación: Land-rietschle klt 40; was overhauled; suitable for various machine such as z.b.falzmaschinen.

we are pleased at this point the note that all offered machines are in our unrestricted ownership or access and are available in our warehouse.

tours and demonstrations are possible by appointment at our premises.

gladly we inform you also about our complete inventory because only a portion of our portfolio is represented.
 RIETSCHLE KLT 40; WAS OVERHAULED; SUITABLE FOR VARIOUS MACHINE SUCH AS Z.B.FALZMASCHINEN. WE ARE PLEASED AT THIS POINT THE NOTE THAT ALL OFFERED MACHINES ARE IN OUR UNRESTRICTED OWNERSHIP OR ACCESS AND ARE AVAILABLE IN OUR WAREHOUSE. TOURS AND DEMONSTRATIONS ARE POSSIBLE BY APPOINTMENT AT OUR PREMISES. GLADLY WE INFORM YOU ALSO ABOUT OUR COMPLETE INVENTORY BECAUSE ONLY A PORTION OF OUR PORTFOLIO IS REPRESENTED.
Vendedor: Joachim Ethner Handelsvertretungen
Año de construcción: usado
Precio: 4.800 €
Ubicación: Land-praxair model 1264<br/>  a powder conveyor is used to control the amount of material that enters the thermal spraying process. the powder may be a metal, an alloy, a ceramic or a self flowing alloy powder, carbide.<br/>  <br/>  model 1264, the open-loop pressure support device tafa sets the industry standard for performance and versatility. the device has a large digital display on the control panel, which displays the speed of the powder gear, maintenance and total running time. a set temperature heating blanket keeps warm the powder to prevent the absorption of moisture, and the canister delivers a pressure up to 90 psi / kpa 621. no matter whether 1264 of fine oxide or rough dense use the model alloys for conveying, you get an unparalleled accuracy and repeatability again and again.<br/>  <br/>  technical data<br/>  205 cubic inches / 3,060 cubic capacity powder funnel<br/>  digital screen<br/>  electric blanket with on / off control<br/>  the strict ce requirements<br/>  selector switch for plasma / hvof<br/>  powder canister pressure gauge and relief valve<br/>  pressure up to 90 psi / kpa 621<br/>  toggle switch controls<br/>  variable powder wheel speed<br/>  <br/>  * price eur10.711,-<br/>  <br/>  1264 pulverförderrer find a further praxair in our shop<br/>  <br/>  item condition: used PRAXAIR MODEL 1264
A POWDER CONVEYOR IS USED TO CONTROL THE AMOUNT OF MATERIAL THAT ENTERS THE THERMAL SPRAYING PROCESS. THE POWDER MAY BE A METAL, AN ALLOY, A CERAMIC OR A SELF FLOWING ALLOY POWDER, CARBIDE.

MODEL 1264, THE OPEN-LOOP PRESSURE SUPPORT DEVICE TAFA SETS THE INDUSTRY STANDARD FOR PERFORMANCE AND VERSATILITY. THE DEVICE HAS A LARGE DIGITAL DISPLAY ON THE CONTROL PANEL, WHICH DISPLAYS THE SPEED OF THE POWDER GEAR, MAINTENANCE AND TOTAL RUNNING TIME. A SET TEMPERATURE HEATING BLANKET KEEPS WARM THE POWDER TO PREVENT THE ABSORPTION OF MOISTURE, AND THE CANISTER DELIVERS A PRESSURE UP TO 90 PSI / KPA 621. NO MATTER WHETHER 1264 OF FINE OXIDE OR ROUGH DENSE USE THE MODEL ALLOYS FOR CONVEYING, YOU GET AN UNPARALLELED ACCURACY AND REPEATABILITY AGAIN AND AGAIN.

TECHNICAL DATA
205 CUBIC INCHES / 3,060 CUBIC CAPACITY POWDER FUNNEL
DIGITAL SCREEN
ELECTRIC BLANKET WITH ON / OFF CONTROL
THE STRICT CE REQUIREMENTS
SELECTOR SWITCH FOR PLASMA / HVOF
POWDER CANISTER PRESSURE GAUGE AND RELIEF VALVE
PRESSURE UP TO 90 PSI / KPA 621
TOGGLE SWITCH CONTROLS
VARIABLE POWDER WHEEL SPEED

* PRICE EUR10.711,-

1264 PULVERFöRDERRER FIND A FURTHER PRAXAIR IN OUR SHOP

ITEM CONDITION: USED
Vendedor: Komplett-Konzept Verwertungs GmbH
Año de construcción: usado
Precio: 4.800 €
Ubicación: Land-praxair model 1264<br/>  a powder conveyor is used to control the amount of material that enters the thermal spraying process. the powder may be a metal, an alloy, a ceramic or a self flowing alloy powder, carbide.<br/>  <br/>  model 1264, the open-loop pressure support device tafa sets the industry standard for performance and versatility. the device has a large digital display on the control panel, which displays the speed of the powder gear, maintenance and total running time. a set temperature heating blanket keeps warm the powder to prevent the absorption of moisture, and the canister delivers a pressure up to 90 psi / kpa 621. no matter whether 1264 of fine oxide or rough dense use the model alloys for conveying, you get an unparalleled accuracy and repeatability again and again.<br/>  <br/>  technical data<br/>  205 cubic inches / 3,060 cubic capacity powder funnel<br/>  digital screen<br/>  electric blanket with on / off control<br/>  the strict ce requirements<br/>  selector switch for plasma / hvof<br/>  powder canister pressure gauge and relief valve<br/>  pressure up to 90 psi / kpa 621<br/>  toggle switch controls<br/>  variable powder wheel speed<br/>  <br/>  incl. accessories + extra essay<br/>  <br/>  * price eur10.711,-<br/>  <br/>  1264 pulverförderrer find a further praxair in our shop<br/>  <br/>  item condition: used PRAXAIR MODEL 1264
A POWDER CONVEYOR IS USED TO CONTROL THE AMOUNT OF MATERIAL THAT ENTERS THE THERMAL SPRAYING PROCESS. THE POWDER MAY BE A METAL, AN ALLOY, A CERAMIC OR A SELF FLOWING ALLOY POWDER, CARBIDE.

MODEL 1264, THE OPEN-LOOP PRESSURE SUPPORT DEVICE TAFA SETS THE INDUSTRY STANDARD FOR PERFORMANCE AND VERSATILITY. THE DEVICE HAS A LARGE DIGITAL DISPLAY ON THE CONTROL PANEL, WHICH DISPLAYS THE SPEED OF THE POWDER GEAR, MAINTENANCE AND TOTAL RUNNING TIME. A SET TEMPERATURE HEATING BLANKET KEEPS WARM THE POWDER TO PREVENT THE ABSORPTION OF MOISTURE, AND THE CANISTER DELIVERS A PRESSURE UP TO 90 PSI / KPA 621. NO MATTER WHETHER 1264 OF FINE OXIDE OR ROUGH DENSE USE THE MODEL ALLOYS FOR CONVEYING, YOU GET AN UNPARALLELED ACCURACY AND REPEATABILITY AGAIN AND AGAIN.

TECHNICAL DATA
205 CUBIC INCHES / 3,060 CUBIC CAPACITY POWDER FUNNEL
DIGITAL SCREEN
ELECTRIC BLANKET WITH ON / OFF CONTROL
THE STRICT CE REQUIREMENTS
SELECTOR SWITCH FOR PLASMA / HVOF
POWDER CANISTER PRESSURE GAUGE AND RELIEF VALVE
PRESSURE UP TO 90 PSI / KPA 621
TOGGLE SWITCH CONTROLS
VARIABLE POWDER WHEEL SPEED

INCL. ACCESSORIES + EXTRA ESSAY

* PRICE EUR10.711,-

1264 PULVERFöRDERRER FIND A FURTHER PRAXAIR IN OUR SHOP

ITEM CONDITION: USED
Vendedor: Komplett-Konzept Verwertungs GmbH
Año de construcción: usado
Ubicación: Land-fair pack products; identical com jd; good condition; cleaned and checked. bandwidth 30 and 40 mm; tabletop; automatic operation; suitable for kraft paper or foil.

we are pleased at this point the note that all offered machines are in our unrestricted ownership or access and are available in our warehouse.

tours and demonstrations are possible by appointment at our premises.

gladly we inform you also about our complete inventory because only a portion of our portfolio is represented. FAIR PACK PRODUCTS; IDENTICAL COM JD; GOOD CONDITION; CLEANED AND CHECKED. BANDWIDTH 30 AND 40 MM; TABLETOP; AUTOMATIC OPERATION; SUITABLE FOR KRAFT PAPER OR FOIL. WE ARE PLEASED AT THIS POINT THE NOTE THAT ALL OFFERED MACHINES ARE IN OUR UNRESTRICTED OWNERSHIP OR ACCESS AND ARE AVAILABLE IN OUR WAREHOUSE. TOURS AND DEMONSTRATIONS ARE POSSIBLE BY APPOINTMENT AT OUR PREMISES. GLADLY WE INFORM YOU ALSO ABOUT OUR COMPLETE INVENTORY BECAUSE ONLY A PORTION OF OUR PORTFOLIO IS REPRESENTED.
Vendedor: Joachim Ethner Handelsvertretungen
Año de construcción: usado
Ubicación: Land- kannan ktw 450 cd; guterzustand; serviced and checked by the kakde customer service; working width 450 mm; 2 brushes; suitable for printing plates toray waterless. pictures will follow.

we are pleased at this point the note that all offered machines are in our unrestricted ownership or access and are available in our warehouse.

tours and demonstrations are possible by appointment at our premises.

gladly we inform you also about our complete inventory because only a portion of our portfolio is represented.
 KANNAN KTW 450 CD; GUTERZUSTAND; SERVICED AND CHECKED BY THE KAKDE CUSTOMER SERVICE; WORKING WIDTH 450 MM; 2 BRUSHES; SUITABLE FOR PRINTING PLATES TORAY WATERLESS. PICTURES WILL FOLLOW. WE ARE PLEASED AT THIS POINT THE NOTE THAT ALL OFFERED MACHINES ARE IN OUR UNRESTRICTED OWNERSHIP OR ACCESS AND ARE AVAILABLE IN OUR WAREHOUSE. TOURS AND DEMONSTRATIONS ARE POSSIBLE BY APPOINTMENT AT OUR PREMISES. GLADLY WE INFORM YOU ALSO ABOUT OUR COMPLETE INVENTORY BECAUSE ONLY A PORTION OF OUR PORTFOLIO IS REPRESENTED.
Vendedor: Joachim Ethner Handelsvertretungen
Año de construcción: usado
Ubicación: Land-hohner economy 13; good condition; cleaned and geã¼prã¼ft; book thickness max. 13 mm. block or saddle stitch.

we are pleased at this point the note that all offered machines are in our unrestricted ownership or access and are available in our warehouse.

tours and demonstrations are possible by appointment at our premises.

gladly we inform you also about our complete inventory because only a portion of our portfolio is represented.
  HOHNER ECONOMY 13; GOOD CONDITION; CLEANED AND GE&ATILDE;&FRAC14;PR&ATILDE;&FRAC14;FT; BOOK THICKNESS MAX. 13 MM. BLOCK OR SADDLE STITCH. WE ARE PLEASED AT THIS POINT THE NOTE THAT ALL OFFERED MACHINES ARE IN OUR UNRESTRICTED OWNERSHIP OR ACCESS AND ARE AVAILABLE IN OUR WAREHOUSE. TOURS AND DEMONSTRATIONS ARE POSSIBLE BY APPOINTMENT AT OUR PREMISES. GLADLY WE INFORM YOU ALSO ABOUT OUR COMPLETE INVENTORY BECAUSE ONLY A PORTION OF OUR PORTFOLIO IS REPRESENTED.
Vendedor: Joachim Ethner Handelsvertretungen
Año de construcción: usado
Ubicación: Land-multi chamber waste baler bts-mf75mk<br/>  <br/>  height: 1969mm<br/>  width: 2050mm<br/>  depth: 872mm<br/>  weight: 562kg<br/>  transportation ht: 1969mm<br/>  power supply: 220-240v (single phase)<br/>  motor: 1.5kw 13 amp<br/>  pressing force: up to 3.5 ton<br/>  noise level: 72 decibels<br/>  <br/>  bale<br/>  height: 1000mm<br/>  width: 700mm<br/>  depth: 500mm<br/>  weight: up to 75kg (depends on material)<br/>  cycle times: 35 seconds<br/>  <br/>  loading aperture<br/>  width: 700mm<br/>  depth: 500mm<br/>  <br/>  features <br/>  o saves handling time with multiple chambers: free to load while other chamber compacts <br/>  o multiple chambers offer an efficient way of separating different materials before baling<br/>  o suitable for areas with height restrictions<br/>  o retaining claws to prevent spring back <br/>  o roller guided head for ease of movement <br/>  o fully automated bale ejector, simplifies removal of bale (only bts-mf200mk)<br/>  o ce-certified<br/>  o made in europe <br/>  <br/>  optional extras <br/>  o additional chambers may be added (up to 6) <br/>  o 110 volts power supply <br/>  o unique patented prong shaper design eliminates the need for pallets when lifting, stacking and transporting bales (only bts-mf200mk); ready for operation MULTI CHAMBER WASTE BALER BTS-MF75MK

HEIGHT: 1969MM
WIDTH: 2050MM
DEPTH: 872MM
WEIGHT: 562KG
TRANSPORTATION HT: 1969MM
POWER SUPPLY: 220-240V (SINGLE PHASE)
MOTOR: 1.5KW 13 AMP
PRESSING FORCE: UP TO 3.5 TON
NOISE LEVEL: 72 DECIBELS

BALE
HEIGHT: 1000MM
WIDTH: 700MM
DEPTH: 500MM
WEIGHT: UP TO 75KG (DEPENDS ON MATERIAL)
CYCLE TIMES: 35 SECONDS

LOADING APERTURE
WIDTH: 700MM
DEPTH: 500MM

FEATURES
O SAVES HANDLING TIME WITH MULTIPLE CHAMBERS: FREE TO LOAD WHILE OTHER CHAMBER COMPACTS
O MULTIPLE CHAMBERS OFFER AN EFFICIENT WAY OF SEPARATING DIFFERENT MATERIALS BEFORE BALING
O SUITABLE FOR AREAS WITH HEIGHT RESTRICTIONS
O RETAINING CLAWS TO PREVENT SPRING BACK
O ROLLER GUIDED HEAD FOR EASE OF MOVEMENT
O FULLY AUTOMATED BALE EJECTOR, SIMPLIFIES REMOVAL OF BALE (ONLY BTS-MF200MK)
O CE-CERTIFIED
O MADE IN EUROPE

OPTIONAL EXTRAS
O ADDITIONAL CHAMBERS MAY BE ADDED (UP TO 6)
O 110 VOLTS POWER SUPPLY
O UNIQUE PATENTED PRONG SHAPER DESIGN ELIMINATES THE NEED FOR PALLETS WHEN LIFTING, STACKING AND TRANSPORTING BALES (ONLY BTS-MF200MK); READY FOR OPERATION
Vendedor: Beckmann Technik & Service KG
Año de construcción: usado
Ubicación: Land-baler bts-mf200mk<br/>  <br/>  height: 2469mm<br/>  width: 3032mm<br/>  depth: 1269mm<br/>  weight: 1400kg<br/>  transportation ht: 2469mm<br/>  power supply: 220-240v (single phase)<br/>  motor: 2.2kw 16 amp<br/>  pressing force: up to 16 ton<br/>  noise level: 74 decibels<br/>  <br/>  bale<br/>  height: 1000mm<br/>  width: 1000mm<br/>  depth: 800mm<br/>  weight: up to 200kg (depends on material)<br/>  cycle times: 34 seconds<br/>  <br/>  loading aperture<br/>  width: 1000mm<br/>  depth: 800mm<br/>  <br/>  o saves handling time with multiple chambers: free to load while other chamber compacts <br/>  o multiple chambers offer an efficient way of separating different materials before baling<br/>  o suitable for areas with height restrictions<br/>  o retaining claws to prevent spring back <br/>  o roller guided head for ease of movement <br/>  o fully automated bale ejector, simplifies removal of bale (only bts-mf200mk)<br/>  o ce-certified<br/>  o made in europe <br/>  <br/>  optional extras <br/>  o additional chambers may be added (up to 6) <br/>  o 110 volts power supply <br/>  o unique patented prong shaper design eliminates the need for pallets when lifting, stacking and transporting bales (only bts-mf200mk); ready for operation BALER BTS-MF200MK

HEIGHT: 2469MM
WIDTH: 3032MM
DEPTH: 1269MM
WEIGHT: 1400KG
TRANSPORTATION HT: 2469MM
POWER SUPPLY: 220-240V (SINGLE PHASE)
MOTOR: 2.2KW 16 AMP
PRESSING FORCE: UP TO 16 TON
NOISE LEVEL: 74 DECIBELS

BALE
HEIGHT: 1000MM
WIDTH: 1000MM
DEPTH: 800MM
WEIGHT: UP TO 200KG (DEPENDS ON MATERIAL)
CYCLE TIMES: 34 SECONDS

LOADING APERTURE
WIDTH: 1000MM
DEPTH: 800MM

O SAVES HANDLING TIME WITH MULTIPLE CHAMBERS: FREE TO LOAD WHILE OTHER CHAMBER COMPACTS
O MULTIPLE CHAMBERS OFFER AN EFFICIENT WAY OF SEPARATING DIFFERENT MATERIALS BEFORE BALING
O SUITABLE FOR AREAS WITH HEIGHT RESTRICTIONS
O RETAINING CLAWS TO PREVENT SPRING BACK
O ROLLER GUIDED HEAD FOR EASE OF MOVEMENT
O FULLY AUTOMATED BALE EJECTOR, SIMPLIFIES REMOVAL OF BALE (ONLY BTS-MF200MK)
O CE-CERTIFIED
O MADE IN EUROPE

OPTIONAL EXTRAS
O ADDITIONAL CHAMBERS MAY BE ADDED (UP TO 6)
O 110 VOLTS POWER SUPPLY
O UNIQUE PATENTED PRONG SHAPER DESIGN ELIMINATES THE NEED FOR PALLETS WHEN LIFTING, STACKING AND TRANSPORTING BALES (ONLY BTS-MF200MK); READY FOR OPERATION
Vendedor: Beckmann Technik & Service KG
Año de construcción: usado
Precio: 13 €
Ubicación: Land-we offer for sale:
used wooden panels, one side white coated
-200 plates available-

-robust construction as new

dimensions (l/w/h):

about 1.811 x 1.004 x 38 mm
belspan p4 boards have a stable nucleus and are suitable for an industrial processing to furniture or interior design.
the plate is suitable for use in the service class 1 (restrictions on temperature and air humidity) and exclusively within the hazard class 1 of standard en 335-3. WE OFFER FOR SALE: USED WOODEN PANELS, ONE SIDE WHITE COATED -200 PLATES AVAILABLE- -ROBUST CONSTRUCTION AS NEW DIMENSIONS (L/W/H): ABOUT 1.811 X 1.004 X 38 MM BELSPAN P4 BOARDS HAVE A STABLE NUCLEUS AND ARE SUITABLE FOR AN INDUSTRIAL PROCESSING TO FURNITURE OR INTERIOR DESIGN. THE PLATE IS SUITABLE FOR USE IN THE SERVICE CLASS 1 (RESTRICTIONS ON TEMPERATURE AND AIR HUMIDITY) AND EXCLUSIVELY WITHIN THE HAZARD CLASS 1 OF STANDARD EN 335-3.
Vendedor: eth Ericus Transport u. Handelsges.mbH
Año de construcción: usado
Precio: 9.500 €
Ubicación: Land-knitting machine barudan elitepro
year of constr.: 2016
single knitting machine head
15 needles KNITTING MACHINE BARUDAN ELITEPRO YEAR OF CONSTR.: 2016 SINGLE KNITTING MACHINE HEAD 15 NEEDLES
Vendedor: Multi Sales Weinstädter
Año de construcción: usado
Ubicación: Land-make: standardkessel
model: steam boiler 30t / h 18bar 380c + two oil burners 
condition: used
machine type: other 
location of machine: germany

machine details
standardkessel coming with two oil burners saacke.

burning medium and heavy oils, heating up to 90c.

- boiler: 2 x 30t / h

- maximum pressure: 18bar

- superheated vapor temperature: 380c

- pumps

- complete hall

- control boxes

- preparation of water

- oil and storage tanks heated 2x 600m3

- transmission pumps

- oil tanks 2x 100m3 

boiler room serviced on a regular basic in the municipal heating plant

in germany.  

plant meets the strict exhaust standards (modernised on a regular 

basis).

the boiler house was working until 2015.

/dry preserved boilers/ 

hall heated in the winter season.

ready for dismantling. 

the price is for complete boiler room without turbine and with out dismantling.   MAKE: STANDARDKESSEL MODEL: STEAM BOILER 30T / H 18BAR 380C + TWO OIL BURNERS CONDITION: USED MACHINE TYPE: OTHER LOCATION OF MACHINE: GERMANY MACHINE DETAILS STANDARDKESSEL COMING WITH TWO OIL BURNERS SAACKE. BURNING MEDIUM AND HEAVY OILS, HEATING UP TO 90C. - BOILER: 2 X 30T / H - MAXIMUM PRESSURE: 18BAR - SUPERHEATED VAPOR TEMPERATURE: 380C - PUMPS - COMPLETE HALL - CONTROL BOXES - PREPARATION OF WATER - OIL AND STORAGE TANKS HEATED 2X 600M3 - TRANSMISSION PUMPS - OIL TANKS 2X 100M3 BOILER ROOM SERVICED ON A REGULAR BASIC IN THE MUNICIPAL HEATING PLANT IN GERMANY. PLANT MEETS THE STRICT EXHAUST STANDARDS (MODERNISED ON A REGULAR BASIS). THE BOILER HOUSE WAS WORKING UNTIL 2015. /DRY PRESERVED BOILERS/ HALL HEATED IN THE WINTER SEASON. READY FOR DISMANTLING. THE PRICE IS FOR COMPLETE BOILER ROOM WITHOUT TURBINE AND WITH OUT DISMANTLING.
Vendedor: CNC Management Ltd
Año de construcción: usado
Ubicación: Land- sealmatic 79t; good condition; cleaned and checked. 3-sides sealing; usable welding bar size 900x690mm; max. product dimensions 670x880mm, height max. 230 mm; tunnel 70; 2 chamber system. band-width 500 mm, height 300 mm; outfeed conveyor.

we are pleased at this point the note that all offered machines are in our unrestricted ownership or access and are available in our warehouse.

tours and demonstrations are possible by appointment at our premises.

gladly we inform you also about our complete inventory because only a portion of our portfolio is represented.
 SEALMATIC 79T; GOOD CONDITION; CLEANED AND CHECKED. 3-SIDES SEALING; USABLE WELDING BAR SIZE 900X690MM; MAX. PRODUCT DIMENSIONS 670X880MM, HEIGHT MAX. 230 MM; TUNNEL 70; 2 CHAMBER SYSTEM. BAND-WIDTH 500 MM, HEIGHT 300 MM; OUTFEED CONVEYOR. WE ARE PLEASED AT THIS POINT THE NOTE THAT ALL OFFERED MACHINES ARE IN OUR UNRESTRICTED OWNERSHIP OR ACCESS AND ARE AVAILABLE IN OUR WAREHOUSE. TOURS AND DEMONSTRATIONS ARE POSSIBLE BY APPOINTMENT AT OUR PREMISES. GLADLY WE INFORM YOU ALSO ABOUT OUR COMPLETE INVENTORY BECAUSE ONLY A PORTION OF OUR PORTFOLIO IS REPRESENTED.
Vendedor: Joachim Ethner Handelsvertretungen
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more types: