884 ofertas

Año de construcción: usado
Ubicación: Land-control ultimax 4
travel x / y / z 1060/610/610 mm
spindle speed 10000 1 / min
tool magazine for 40 tools sk40
internal coolant
4th axis
chip conveyor  CONTROL ULTIMAX 4 TRAVEL X / Y / Z 1060/610/610 MM SPINDLE SPEED 10000 1 / MIN TOOL MAGAZINE FOR 40 TOOLS SK40 INTERNAL COOLANT 4TH AXIS CHIP CONVEYOR
Vendedor: WMH24
Año de construcción: usado
Ubicación: Land-turning diameter: 320 mm<br/>turning length: 600 mm<br/>control: sinumerik 840d <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>cnc control sinumerik 840d<br/>c-axis<br/>driven tools<br/>12-fold revolver<br/>3-jaw chuck <br/>chip conveyor<br/>coolant device<br/><br/>technische daten / technical details:<br/>drehlänge / turning length    600    mm<br/>max. drehdurchmesser / max. turning diameter    320    mm<br/>umlauf-Ø über bett / rotary Ø over bed    505    mm<br/>umlauf-Ø über schlitten / rotary Ø over sledge    365    mm<br/>längsweg / longitudinal travel    635    mm<br/>planweg / cross travel    250    mm<br/>drehzahlbereich / spindle speed range    25-5000    upm /rpm<br/>anzahl revolverwerkzeugplätze / number of places in revolver    12    fach /fold<br/>eilgang z, x / rapid feed z, x    30/24    m/min<br/>antriebsleistung spindel / drive capacity spindle     21    kw<br/>gewicht der maschine ca. / weight ca.    5500    kg<br/>technische daten, zubehör und beschreibung der maschine sind unverbindlich -<br/>technical data, accessories and description of the machine are not binding.<br/><br/><br/><br/><br/><br/> TURNING DIAMETER: 320 MM
TURNING LENGTH: 600 MM
CONTROL: SINUMERIK 840D
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
CNC CONTROL SINUMERIK 840D
C-AXIS
DRIVEN TOOLS
12-FOLD REVOLVER
3-JAW CHUCK
CHIP CONVEYOR
COOLANT DEVICE

TECHNISCHE DATEN / TECHNICAL DETAILS:
DREHLäNGE / TURNING LENGTH 600 MM
MAX. DREHDURCHMESSER / MAX. TURNING DIAMETER 320 MM
UMLAUF-Ø üBER BETT / ROTARY Ø OVER BED 505 MM
UMLAUF-Ø üBER SCHLITTEN / ROTARY Ø OVER SLEDGE 365 MM
LäNGSWEG / LONGITUDINAL TRAVEL 635 MM
PLANWEG / CROSS TRAVEL 250 MM
DREHZAHLBEREICH / SPINDLE SPEED RANGE 25-5000 UPM /RPM
ANZAHL REVOLVERWERKZEUGPLäTZE / NUMBER OF PLACES IN REVOLVER 12 FACH /FOLD
EILGANG Z, X / RAPID FEED Z, X 30/24 M/MIN
ANTRIEBSLEISTUNG SPINDEL / DRIVE CAPACITY SPINDLE 21 KW
GEWICHT DER MASCHINE CA. / WEIGHT CA. 5500 KG
TECHNISCHE DATEN, ZUBEHöR UND BESCHREIBUNG DER MASCHINE SIND UNVERBINDLICH -
TECHNICAL DATA, ACCESSORIES AND DESCRIPTION OF THE MACHINE ARE NOT BINDING.





Vendedor: Gustav Schönberger GmbH
Año de construcción: usado
Ubicación: Land-bystronic xpert 200x4100 (2012)

overview
brand: bystronic
model: xpert 200x4100
application type: bending
machine type: bending machines
availability: immediately
production year: 2012
location: italy
origin country: germany
production hours: 12567

general data
machine weight: 17600 kg

control unit
interface: microsoft windows xp

main drive
pressing force: 2000 kn
bending length: 4100 mm
main motor power: 18.5 kw
stroke: 415 mm

media
main electronic connection: 400 v
power consumption: 22 kw
air pressure: 8 bar

additional equipment
1: tools
2: fast bend+  BYSTRONIC XPERT 200X4100 (2012) OVERVIEW BRAND: BYSTRONIC MODEL: XPERT 200X4100 APPLICATION TYPE: BENDING MACHINE TYPE: BENDING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2012 LOCATION: ITALY ORIGIN COUNTRY: GERMANY PRODUCTION HOURS: 12567 GENERAL DATA MACHINE WEIGHT: 17600 KG CONTROL UNIT INTERFACE: MICROSOFT WINDOWS XP MAIN DRIVE PRESSING FORCE: 2000 KN BENDING LENGTH: 4100 MM MAIN MOTOR POWER: 18.5 KW STROKE: 415 MM MEDIA MAIN ELECTRONIC CONNECTION: 400 V POWER CONSUMPTION: 22 KW AIR PRESSURE: 8 BAR ADDITIONAL EQUIPMENT 1: TOOLS 2: FAST BEND+
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 800 mm<br/>y-travel: 710 mm<br/>z-travel: 710 mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>cnc control sinumerik 840d<br/>nc-rotary table b-axis<br/>automatic tool changer for 40 tools<br/>pallet changing device, 2 pallets 630x500<br/>coolant through spindle device ikz<br/>chip conveyor<br/>coolant device<br/><br/>technische daten / technical details:<br/>x-weg / x-travel    800    mm<br/>y-weg / y-travel    710    mm<br/>z-weg / z-travel    710    mm<br/>b-achse / b-axis    360 x 0,001°    <br/>spindelaufnahme / spindle taper    sk 50    <br/>drehzahlbereich spindel / spindle speed    10000    upm /rpm<br/>vorschub / infeed    40000    mm/min<br/>eilgang / rapid feed    40    m/min<br/>antriebsleistung 40/100% ed / drive capacity 40/100% ed    37/25    kw<br/>gewicht der maschine ca. / weight ca.    15300    kg<br/>technische daten, zubehör und beschreibung der maschine sind unverbindlich -<br/>technical data, accessories and description of the machine are not binding.<br/><br/><br/><br/><br/><br/><br/> X-TRAVEL: 800 MM
Y-TRAVEL: 710 MM
Z-TRAVEL: 710 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
CNC CONTROL SINUMERIK 840D
NC-ROTARY TABLE B-AXIS
AUTOMATIC TOOL CHANGER FOR 40 TOOLS
PALLET CHANGING DEVICE, 2 PALLETS 630X500
COOLANT THROUGH SPINDLE DEVICE IKZ
CHIP CONVEYOR
COOLANT DEVICE

TECHNISCHE DATEN / TECHNICAL DETAILS:
X-WEG / X-TRAVEL 800 MM
Y-WEG / Y-TRAVEL 710 MM
Z-WEG / Z-TRAVEL 710 MM
B-ACHSE / B-AXIS 360 X 0,001°
SPINDELAUFNAHME / SPINDLE TAPER SK 50
DREHZAHLBEREICH SPINDEL / SPINDLE SPEED 10000 UPM /RPM
VORSCHUB / INFEED 40000 MM/MIN
EILGANG / RAPID FEED 40 M/MIN
ANTRIEBSLEISTUNG 40/100% ED / DRIVE CAPACITY 40/100% ED 37/25 KW
GEWICHT DER MASCHINE CA. / WEIGHT CA. 15300 KG
TECHNISCHE DATEN, ZUBEHöR UND BESCHREIBUNG DER MASCHINE SIND UNVERBINDLICH -
TECHNICAL DATA, ACCESSORIES AND DESCRIPTION OF THE MACHINE ARE NOT BINDING.






Vendedor: Gustav Schönberger GmbH
Año de construcción: usado
Ubicación: Land-beyeler pr6 (2000)

overview
brand: beyeler
model: pr6
application type: bending
machine type: bending machines
availability: immediately
production year: 2000
location: italy
origin country: germany

general data
machine weight: 23400 kg

control unit
brand: cybelec
model: dnc 1200

main drive
pressing force: 3200 kn
bending length: 4100 mm
main motor power: 22 kw
stroke: 365 mm

media
main electronic connection: 400 v
air pressure: 8 bar

additional equipment
1: tools BEYELER PR6 (2000) OVERVIEW BRAND: BEYELER MODEL: PR6 APPLICATION TYPE: BENDING MACHINE TYPE: BENDING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2000 LOCATION: ITALY ORIGIN COUNTRY: GERMANY GENERAL DATA MACHINE WEIGHT: 23400 KG CONTROL UNIT BRAND: CYBELEC MODEL: DNC 1200 MAIN DRIVE PRESSING FORCE: 3200 KN BENDING LENGTH: 4100 MM MAIN MOTOR POWER: 22 KW STROKE: 365 MM MEDIA MAIN ELECTRONIC CONNECTION: 400 V AIR PRESSURE: 8 BAR ADDITIONAL EQUIPMENT 1: TOOLS
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: 3.800 €
Ubicación: Land-tenoning spindle: 1 st.<br/>number of milling agregates: 4 st.<br/>spindle diameter: 50/40 mm<br/>dimensions (l/w/h): 3500x2400x2400 mm<br/>weight: 3750 kg<br/>! machine on order for sale!<br/><br/>! can still be visited in action!<br/><br/>gubisch - centromat cw 1<br/><br/>for window and door production with 50 mm d spindles in longitudinal profiling.<br/><br/>with the following processing stations and possibilities:<br/><br/>1.0 automatically cutting the cross-cut saw from above<br/><br/>- engine power, including engine brake 3.0 kw<br/>- spindle speed 2800 rpm.<br/>- circle diameter 350 mm<br/>- spindle diameter 30 mm d<br/>- clamping flange, 1 driver 6 mm d<br/>  tc 42 mm 120 mm dia.<br/>- vertical stroke pneumatic 100 mm<br/>- horizontal stroke pneumatic 160 mm<br/>  against 2 manual 6-fold revolver stops<br/>- shaving dust hood with extraction nozzle 105 mm d<br/><br/>2.0 slot unit<br/><br/>- engine power, including engine brake 9.2 kw<br/>- spindle speed 3800 rpm.<br/>- circle diameter 320 mm max.<br/>- spindle diameter 50 mm<br/>- spindle usage length 300 mm<br/>- vertical stroke pneumatically fixed 2 x 100 mm<br/>- suitable for 3 tool sets a 100 mm<br/>- zero height 10 mm<br/>- shaving dust hood with extraction nozzle-d 160 mm<br/><br/>3.0 slot table<br/><br/>- table height above ground 920 mm<br/>- feed for 4 speeds freely adjustable:<br/>1st milling, oblique window u. tippgeschw. 7 m / min.<br/>in the tableau.<br/>2. sawing speed 7 m / min.<br/>   3. transfer speed 10 m / min. = on the device.<br/>- 4. return speed / without machining. 25 m / min.<br/>- engine power including engine brake 0.37 kw<br/>- 1 clamping cylinder with 2 additional. pressure shoes<br/>- workpiece clamping pneumatic<br/><br/>3.1 counter timber<br/>- counter holchanger with 2 positions, automatically changeable as well<br/>  manual rotation of 180 °<br/><br/>3.2 length stop<br/>- stop system with 3 scales for<br/>a) frame outside<br/>b) wing upright upright<br/>c) wings outside across<br/>- manual adjustment<br/>- length 2300 mm<br/>- swiveling for diagonal windows +/- 60 degrees<br/><br/>3.3 angle transfer<br/>       automatically via vertically indexed feed roller in the milling feed<br/><br/>4.0 milling machine<br/>       for longitudinal profiling and overturning of windows / doors with the <br/>following<br/>aggregates:<br/><br/>4.1 synchronized milling unit with automatic dipping<br/>- synchronism<br/>- automatic dipping can be used for refolding<br/>- engine power including engine brake 7.5 kw<br/>- spindle speed 6000 rpm.<br/>- circle diameter 240 mm max.<br/>- side stops adjustable for zero-d 140 mm max.<br/>  tools 112 mm min.<br/>- zero height 10 mm<br/>- spindle diameter 50 mm d<br/>- spindle useful length 100 mm<br/>- horizontal stroke pneumatic 80 mm<br/>- shaving dust hood with extraction nozzle d 120 mm<br/><br/>4.2 profile milling unit<br/><br/>- reverse<br/>- engine power including engine brake 9.2 kw<br/>- spindle speed 6000 rpm.<br/>- circle diameter 240 mm max.<br/>- side stops adjustable for zero-d 140 mm max.<br/>  tools 112 mm min.<br/>- zero height 10 mm<br/>- spindle diameter 50 mm d<br/>- spindle usage length 300 mm<br/>- vertical stroke pneumatically fixed 1 x 100 mm<br/>  suitable for 3 tool sets a 100 mm 2 x 100 mm<br/>- shaving dust hood with extraction nozzle-d 140 mm<br/><br/>4.3 fitting device<br/><br/>- reverse<br/>- engine power including engine brake 4.0 kw<br/>- spindle speed 6,000 rpm.<br/>- circle diameter 200 mm fix<br/>- zero height 10 mm<br/>- spindle diameter 50 mm d<br/>- spindle useful length 100 mm<br/>- horizontal stroke 80 mm<br/>- chip extraction with extraction nozzle-d 120 mm<br/><br/>4.4 glass bead sawing unit<br/>- reverse<br/>- engine power including engine brake 3.0 kw<br/>- spindle speed 3,000 rpm.<br/>- spindle diameter 30 mm<br/>- spindle useful length 15 mm<br/>- circle diameter 200 mm<br/>- clamping flange, 1 driver 6 mm d<br/>  tc 42 mm 85 mm d<br/>- vertical stroke pneumatic 100 mm<br/>- glazing bead removal<br/>  incl. anti-kickback device on the unit<br/>- shaving dust hood with extraction nozzle-d 80 mm<br/>- including electr. control<br/><br/>4.5 feed<br/>- motor power 0.75 kw<br/>- feed rate 6 m / min.<br/>- roller distance<br/>  in the area of ??processing units 110 mm<br/>  in the area of ??the feeder 200 mm<br/>- feed rollers individually adjustable diagonally to the stop<br/><br/>4.6 vertical right stops<br/>- stop 1 + 2 for 1 mm chip removal<br/>  adjusted<br/>- adjustable for zero diameter 112 - 140 mm<br/><br/>5.0 workpiece return device<br/>- the finished workpieces come over a sloping roller conveyor<br/> back to the operator.<br/><br/>6.0 central control<br/><br/>clear central control panel with standard control and semi-automatic<br/>in the slot or profile milling unit<br/>(3 programs for frame production iv)<br/>- single and combined operation with automatic angle transfer function<br/>- with umfälzbetriebsschaltung including 4-step control<br/>- simplest, easy to understand, logically structured handling of the controller<br/><br/>8.0 technical connection data<br/>- compressed air connection 3/8 8 bar<br/>- compressed air consumption approx<br/>- extraction air volume 135 m3 / min.<br/>- operating voltage 380 volts, 50 hz.<br/>- connected total 36.0 kw<br/>- extraction air velocity 32 m / sec.<br/>- electrical equipment according to vde 0113 / ip 54<br/>- loading weight approx. 3750 kg<br/><br/>(technical data according to manufacturer - without guarantee!)<br/><br/><br/><br/><br/> TENONING SPINDLE: 1 ST.
NUMBER OF MILLING AGREGATES: 4 ST.
SPINDLE DIAMETER: 50/40 MM
DIMENSIONS (L/W/H): 3500X2400X2400 MM
WEIGHT: 3750 KG
! MACHINE ON ORDER FOR SALE!

! CAN STILL BE VISITED IN ACTION!

GUBISCH - CENTROMAT CW 1

FOR WINDOW AND DOOR PRODUCTION WITH 50 MM D SPINDLES IN LONGITUDINAL PROFILING.

WITH THE FOLLOWING PROCESSING STATIONS AND POSSIBILITIES:

1.0 AUTOMATICALLY CUTTING THE CROSS-CUT SAW FROM ABOVE

- ENGINE POWER, INCLUDING ENGINE BRAKE 3.0 KW
- SPINDLE SPEED 2800 RPM.
- CIRCLE DIAMETER 350 MM
- SPINDLE DIAMETER 30 MM D
- CLAMPING FLANGE, 1 DRIVER 6 MM D
TC 42 MM 120 MM DIA.
- VERTICAL STROKE PNEUMATIC 100 MM
- HORIZONTAL STROKE PNEUMATIC 160 MM
AGAINST 2 MANUAL 6-FOLD REVOLVER STOPS
- SHAVING DUST HOOD WITH EXTRACTION NOZZLE 105 MM D

2.0 SLOT UNIT

- ENGINE POWER, INCLUDING ENGINE BRAKE 9.2 KW
- SPINDLE SPEED 3800 RPM.
- CIRCLE DIAMETER 320 MM MAX.
- SPINDLE DIAMETER 50 MM
- SPINDLE USAGE LENGTH 300 MM
- VERTICAL STROKE PNEUMATICALLY FIXED 2 X 100 MM
- SUITABLE FOR 3 TOOL SETS A 100 MM
- ZERO HEIGHT 10 MM
- SHAVING DUST HOOD WITH EXTRACTION NOZZLE-D 160 MM

3.0 SLOT TABLE

- TABLE HEIGHT ABOVE GROUND 920 MM
- FEED FOR 4 SPEEDS FREELY ADJUSTABLE:
1ST MILLING, OBLIQUE WINDOW U. TIPPGESCHW. 7 M / MIN.
IN THE TABLEAU.
2. SAWING SPEED 7 M / MIN.
3. TRANSFER SPEED 10 M / MIN. = ON THE DEVICE.
- 4. RETURN SPEED / WITHOUT MACHINING. 25 M / MIN.
- ENGINE POWER INCLUDING ENGINE BRAKE 0.37 KW
- 1 CLAMPING CYLINDER WITH 2 ADDITIONAL. PRESSURE SHOES
- WORKPIECE CLAMPING PNEUMATIC

3.1 COUNTER TIMBER
- COUNTER HOLCHANGER WITH 2 POSITIONS, AUTOMATICALLY CHANGEABLE AS WELL
MANUAL ROTATION OF 180 °

3.2 LENGTH STOP
- STOP SYSTEM WITH 3 SCALES FOR
A) FRAME OUTSIDE
B) WING UPRIGHT UPRIGHT
C) WINGS OUTSIDE ACROSS
- MANUAL ADJUSTMENT
- LENGTH 2300 MM
- SWIVELING FOR DIAGONAL WINDOWS +/- 60 DEGREES

3.3 ANGLE TRANSFER
AUTOMATICALLY VIA VERTICALLY INDEXED FEED ROLLER IN THE MILLING FEED

4.0 MILLING MACHINE
FOR LONGITUDINAL PROFILING AND OVERTURNING OF WINDOWS / DOORS WITH THE
FOLLOWING
AGGREGATES:

4.1 SYNCHRONIZED MILLING UNIT WITH AUTOMATIC DIPPING
- SYNCHRONISM
- AUTOMATIC DIPPING CAN BE USED FOR REFOLDING
- ENGINE POWER INCLUDING ENGINE BRAKE 7.5 KW
- SPINDLE SPEED 6000 RPM.
- CIRCLE DIAMETER 240 MM MAX.
- SIDE STOPS ADJUSTABLE FOR ZERO-D 140 MM MAX.
TOOLS 112 MM MIN.
- ZERO HEIGHT 10 MM
- SPINDLE DIAMETER 50 MM D
- SPINDLE USEFUL LENGTH 100 MM
- HORIZONTAL STROKE PNEUMATIC 80 MM
- SHAVING DUST HOOD WITH EXTRACTION NOZZLE D 120 MM

4.2 PROFILE MILLING UNIT

- REVERSE
- ENGINE POWER INCLUDING ENGINE BRAKE 9.2 KW
- SPINDLE SPEED 6000 RPM.
- CIRCLE DIAMETER 240 MM MAX.
- SIDE STOPS ADJUSTABLE FOR ZERO-D 140 MM MAX.
TOOLS 112 MM MIN.
- ZERO HEIGHT 10 MM
- SPINDLE DIAMETER 50 MM D
- SPINDLE USAGE LENGTH 300 MM
- VERTICAL STROKE PNEUMATICALLY FIXED 1 X 100 MM
SUITABLE FOR 3 TOOL SETS A 100 MM 2 X 100 MM
- SHAVING DUST HOOD WITH EXTRACTION NOZZLE-D 140 MM

4.3 FITTING DEVICE

- REVERSE
- ENGINE POWER INCLUDING ENGINE BRAKE 4.0 KW
- SPINDLE SPEED 6,000 RPM.
- CIRCLE DIAMETER 200 MM FIX
- ZERO HEIGHT 10 MM
- SPINDLE DIAMETER 50 MM D
- SPINDLE USEFUL LENGTH 100 MM
- HORIZONTAL STROKE 80 MM
- CHIP EXTRACTION WITH EXTRACTION NOZZLE-D 120 MM

4.4 GLASS BEAD SAWING UNIT
- REVERSE
- ENGINE POWER INCLUDING ENGINE BRAKE 3.0 KW
- SPINDLE SPEED 3,000 RPM.
- SPINDLE DIAMETER 30 MM
- SPINDLE USEFUL LENGTH 15 MM
- CIRCLE DIAMETER 200 MM
- CLAMPING FLANGE, 1 DRIVER 6 MM D
TC 42 MM 85 MM D
- VERTICAL STROKE PNEUMATIC 100 MM
- GLAZING BEAD REMOVAL
INCL. ANTI-KICKBACK DEVICE ON THE UNIT
- SHAVING DUST HOOD WITH EXTRACTION NOZZLE-D 80 MM
- INCLUDING ELECTR. CONTROL

4.5 FEED
- MOTOR POWER 0.75 KW
- FEED RATE 6 M / MIN.
- ROLLER DISTANCE
IN THE AREA OF ??PROCESSING UNITS 110 MM
IN THE AREA OF ??THE FEEDER 200 MM
- FEED ROLLERS INDIVIDUALLY ADJUSTABLE DIAGONALLY TO THE STOP

4.6 VERTICAL RIGHT STOPS
- STOP 1 + 2 FOR 1 MM CHIP REMOVAL
ADJUSTED
- ADJUSTABLE FOR ZERO DIAMETER 112 - 140 MM

5.0 WORKPIECE RETURN DEVICE
- THE FINISHED WORKPIECES COME OVER A SLOPING ROLLER CONVEYOR
BACK TO THE OPERATOR.

6.0 CENTRAL CONTROL

CLEAR CENTRAL CONTROL PANEL WITH STANDARD CONTROL AND SEMI-AUTOMATIC
IN THE SLOT OR PROFILE MILLING UNIT
(3 PROGRAMS FOR FRAME PRODUCTION IV)
- SINGLE AND COMBINED OPERATION WITH AUTOMATIC ANGLE TRANSFER FUNCTION
- WITH UMFäLZBETRIEBSSCHALTUNG INCLUDING 4-STEP CONTROL
- SIMPLEST, EASY TO UNDERSTAND, LOGICALLY STRUCTURED HANDLING OF THE CONTROLLER

8.0 TECHNICAL CONNECTION DATA
- COMPRESSED AIR CONNECTION 3/8 8 BAR
- COMPRESSED AIR CONSUMPTION APPROX
- EXTRACTION AIR VOLUME 135 M3 / MIN.
- OPERATING VOLTAGE 380 VOLTS, 50 HZ.
- CONNECTED TOTAL 36.0 KW
- EXTRACTION AIR VELOCITY 32 M / SEC.
- ELECTRICAL EQUIPMENT ACCORDING TO VDE 0113 / IP 54
- LOADING WEIGHT APPROX. 3750 KG

(TECHNICAL DATA ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Precio: 19.000 €
Ubicación: Land-
machine type cnc lathe - inclined bed machine make schaublin type 110 cnc built 1998 control type cnc storage france country of origin switzerland delivery immediately cargo base stock technical details

turning diameter 420 mm turning length 300 mm control fanuc 18 t c-axis 0.001 degree speed 1750-5000 r/min turret 8 powered tools turning diameter over bed 420 mm additional information

turning diameter over bed 420 mm
 spindle bore 32 mm
 turning diameter 120 mm
 sled:
 longitudinal travel (z axis) 300 mm
 plan travel (x-axis) 180 mm
 c axis live tools turret sled: number 1
 number of positions revolver 8
 driven tools revolver 8
 spindle retainer:
 camlock
 spindle speeds:
 continuously variable
 30 rpm
 up to 5000 rpm
 without reitstock-:

feeds:
 continuously variable
 length of 0 mm/min
 up to 10000 mm/min
 map of 0 mm/min
 up to 6000 mm/min
 rapid traverse 12 m / min
 connection 50 hz 3 x 380 volt
 kw spindle motor 150 100%
 total power consumption 18 kva
 machine weight 3250 kg

miscellaneous accessories:
 clamping tongs recording
 lighting
 coolant system
 splash guard cabin complete
 central lubrication system
 electronic handwheel
 interface rs 232
 workpiece remover
 chip conveyor / / tensioning clamp device
 10 piece tool holder
 5 powered holder
 rod loader samsys 3000 MACHINE TYPE CNC LATHE - INCLINED BED MACHINE MAKE SCHAUBLIN TYPE 110 CNC BUILT 1998 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN SWITZERLAND DELIVERY IMMEDIATELY CARGO BASE STOCK TECHNICAL DETAILS TURNING DIAMETER 420 MM TURNING LENGTH 300 MM CONTROL FANUC 18 T C-AXIS 0.001 DEGREE SPEED 1750-5000 R/MIN TURRET 8 POWERED TOOLS TURNING DIAMETER OVER BED 420 MM ADDITIONAL INFORMATION TURNING DIAMETER OVER BED 420 MM SPINDLE BORE 32 MM TURNING DIAMETER 120 MM SLED: LONGITUDINAL TRAVEL (Z AXIS) 300 MM PLAN TRAVEL (X-AXIS) 180 MM C AXIS LIVE TOOLS TURRET SLED: NUMBER 1 NUMBER OF POSITIONS REVOLVER 8 DRIVEN TOOLS REVOLVER 8 SPINDLE RETAINER: CAMLOCK SPINDLE SPEEDS: CONTINUOUSLY VARIABLE 30 RPM UP TO 5000 RPM WITHOUT REITSTOCK-: FEEDS: CONTINUOUSLY VARIABLE LENGTH OF 0 MM/MIN UP TO 10000 MM/MIN MAP OF 0 MM/MIN UP TO 6000 MM/MIN RAPID TRAVERSE 12 M / MIN CONNECTION 50 HZ 3 X 380 VOLT KW SPINDLE MOTOR 150 100% TOTAL POWER CONSUMPTION 18 KVA MACHINE WEIGHT 3250 KG MISCELLANEOUS ACCESSORIES: CLAMPING TONGS RECORDING LIGHTING COOLANT SYSTEM SPLASH GUARD CABIN COMPLETE CENTRAL LUBRICATION SYSTEM ELECTRONIC HANDWHEEL INTERFACE RS 232 WORKPIECE REMOVER CHIP CONVEYOR / / TENSIONING CLAMP DEVICE 10 PIECE TOOL HOLDER 5 POWERED HOLDER ROD LOADER SAMSYS 3000
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Precio: used machinery auction RESALE 18.000 €
Ubicación: Land-weight approx.: 2100 kg<br/>dimensions (l x w x h) approx.: 2043 x 1138 x 1760 mm<br/>description: -serial number 2602044772codl<br> -machine number 009/56995<br> -control: ge fanuc series 16i-tb<br> -operating hours total = 67037 h<br> -work = 13817 h<br> -max rotating diameter 12.7 mm<br> -max spindle speed = 12000 rpm<br> -longitudinal stroke z1 = 120 mm<br> -feed / rapid traverse = 40 m / min<br> -spindle position 0.1 degrees<br> -compression collet type schaublin 76-580<br> -cross slide<br> -radial stroke c1 = 30 m, transverse stroke y1 = 195mm<br> -feed / rapid traverse x1 = 40 m / min<br> -tool holder max number of tools 5/4 (fixed / driven)<br> -dimensions tool shank 10 x 10 mm<br> -slide x2, transverse stroke x2 = 180 mm<br> -feed / rapid traverse = 40 m / min<br> -counterspindle, longitudinal stroke z2 = 180 mm<br> -feed / rapid traverse z2 = 40 m / min<br> -incl. chip conveyor with worm drive<br> -coolant content max. 140 l<br> <br> -weight bar loader 650 kg<br> -dimensions bar loader 4000 x 500 x 150 mm<br> WEIGHT APPROX.: 2100 KG
DIMENSIONS (L X W X H) APPROX.: 2043 X 1138 X 1760 MM
DESCRIPTION: -SERIAL NUMBER 2602044772CODL
-MACHINE NUMBER 009/56995
-CONTROL: GE FANUC SERIES 16I-TB
-OPERATING HOURS TOTAL = 67037 H
-WORK = 13817 H
-MAX ROTATING DIAMETER 12.7 MM
-MAX SPINDLE SPEED = 12000 RPM
-LONGITUDINAL STROKE Z1 = 120 MM
-FEED / RAPID TRAVERSE = 40 M / MIN
-SPINDLE POSITION 0.1 DEGREES
-COMPRESSION COLLET TYPE SCHAUBLIN 76-580
-CROSS SLIDE
-RADIAL STROKE C1 = 30 M, TRANSVERSE STROKE Y1 = 195MM
-FEED / RAPID TRAVERSE X1 = 40 M / MIN
-TOOL HOLDER MAX NUMBER OF TOOLS 5/4 (FIXED / DRIVEN)
-DIMENSIONS TOOL SHANK 10 X 10 MM
-SLIDE X2, TRANSVERSE STROKE X2 = 180 MM
-FEED / RAPID TRAVERSE = 40 M / MIN
-COUNTERSPINDLE, LONGITUDINAL STROKE Z2 = 180 MM
-FEED / RAPID TRAVERSE Z2 = 40 M / MIN
-INCL. CHIP CONVEYOR WITH WORM DRIVE
-COOLANT CONTENT MAX. 140 L

-WEIGHT BAR LOADER 650 KG
-DIMENSIONS BAR LOADER 4000 X 500 X 150 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 49.000 €
Ubicación: Land-engine details

stock number 1105-02499 machine type cnc lathe - inclined bed machine make gildemeister type ctx 320 v6 built in 2003 control type cnc storage france country of origin germany delivery immediately from stock of based on cargo from site work technical details

turning diameter 505 mm turning length 450 mm control siemens 840 d shop mill lining diameter 210 mm rod diameter 51 mm turning diameter over bed slide 375 x way 213 mm z-axis 450 mm spindle speeds 25-6000 rpm spindle motor 16 / 12 kw torque on the s pindel 153 / 115 nm rapid traverse - longitudinal/plan 60/12/45 m / min c-axis 0.001 / 360 Ⱐnumber of driven tools 12 mm 㸠30 mm power 9 / 6.7 kw speed range 4500 / 4000 kw/rpm total power requirement 29 machine weight approx. 3.7 tonnes of space c a. 3.0 x 2.2 x 2.0 m accessories main and sub spindle yes and y axis c - axis 0.001 Ⱐfor main u.gegenspindel y - axis +-40 mm 12 angetr. coolant system chip conveyor additional information tools

well preserved machine
 with counter spindle
 4 axis machine
 c axis and y axe
 5 live tools + 10 fixed tools
 spaenefoerderer
 cnc siemens 840 d shop mill ENGINE DETAILS STOCK NUMBER 1105-02499 MACHINE TYPE CNC LATHE - INCLINED BED MACHINE MAKE GILDEMEISTER TYPE CTX 320 V6 BUILT IN 2003 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN GERMANY DELIVERY IMMEDIATELY FROM STOCK OF BASED ON CARGO FROM SITE WORK TECHNICAL DETAILS TURNING DIAMETER 505 MM TURNING LENGTH 450 MM CONTROL SIEMENS 840 D SHOP MILL LINING DIAMETER 210 MM ROD DIAMETER 51 MM TURNING DIAMETER OVER BED SLIDE 375 X WAY 213 MM Z-AXIS 450 MM SPINDLE SPEEDS 25-6000 RPM SPINDLE MOTOR 16 / 12 KW TORQUE ON THE S PINDEL 153 / 115 NM RAPID TRAVERSE - LONGITUDINAL/PLAN 60/12/45 M / MIN C-AXIS 0.001 / 360 &ACIRC;&DEG; NUMBER OF DRIVEN TOOLS 12 MM &ATILDE;&CEDIL; 30 MM POWER 9 / 6.7 KW SPEED RANGE 4500 / 4000 KW/RPM TOTAL POWER REQUIREMENT 29 MACHINE WEIGHT APPROX. 3.7 TONNES OF SPACE C A. 3.0 X 2.2 X 2.0 M ACCESSORIES MAIN AND SUB SPINDLE YES AND Y AXIS C - AXIS 0.001 &ACIRC;&DEG; FOR MAIN U.GEGENSPINDEL Y - AXIS +-40 MM 12 ANGETR. COOLANT SYSTEM CHIP CONVEYOR ADDITIONAL INFORMATION TOOLS WELL PRESERVED MACHINE WITH COUNTER SPINDLE 4 AXIS MACHINE C AXIS AND Y AXE 5 LIVE TOOLS + 10 FIXED TOOLS SPAENEFOERDERER CNC SIEMENS 840 D SHOP MILL
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-weight approx.: 5000 kg<br/>dimensions (l x w x h) approx.: 5500 x 2500 x 2800 mm<br/>c-axis: ja/yes <br/>tool changer: 10/14 <br/>description: <b>busellato jet concept m cnc machining center for the production of windows and doors including tools as shown in the pictures, as well as fixed horizontal milling cutter (e.g. for milling lock cases)</b><br> - table size: 4300 mm x 1350 mm<br> - number of fences: 2 left, 2 rigth and 5 behind<br> - special frame-fences: 2 left and right<br> - number of consoles: 8<br> - number of suckencups per console: 3<br> - c axis: yes<br> - tools/aggregate intake: yes (see picture)<br> - changer 1: 10<br> - changer 2: 14<br> WEIGHT APPROX.: 5000 KG
DIMENSIONS (L X W X H) APPROX.: 5500 X 2500 X 2800 MM
C-AXIS: JA/YES
TOOL CHANGER: 10/14
DESCRIPTION: BUSELLATO JET CONCEPT M CNC MACHINING CENTER FOR THE PRODUCTION OF WINDOWS AND DOORS INCLUDING TOOLS AS SHOWN IN THE PICTURES, AS WELL AS FIXED HORIZONTAL MILLING CUTTER (E.G. FOR MILLING LOCK CASES)
- TABLE SIZE: 4300 MM X 1350 MM
- NUMBER OF FENCES: 2 LEFT, 2 RIGTH AND 5 BEHIND
- SPECIAL FRAME-FENCES: 2 LEFT AND RIGHT
- NUMBER OF CONSOLES: 8
- NUMBER OF SUCKENCUPS PER CONSOLE: 3
- C AXIS: YES
- TOOLS/AGGREGATE INTAKE: YES (SEE PICTURE)
- CHANGER 1: 10
- CHANGER 2: 14
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-punching power: 28t
plate thickness max.: 6mm
punching diameter max.: 105mm
working range without repositioning: 2.000x1.250mm
number of strokes max.: 250 1/min
positioning speed x-axis: 60m/min
positioning speed y-axis: 30m/min
maximum piece weight: 200kg

equipment:
- cnc labod control unit
- desktop pc programming software
- 6-way revotool
- 2x clamps
- extraction of the punched out pieces
- repositioning up to 10m und clamp movement without plate contact
- diverse tools
- user manual  PUNCHING POWER: 28T PLATE THICKNESS MAX.: 6MM PUNCHING DIAMETER MAX.: 105MM WORKING RANGE WITHOUT REPOSITIONING: 2.000X1.250MM NUMBER OF STROKES MAX.: 250 1/MIN POSITIONING SPEED X-AXIS: 60M/MIN POSITIONING SPEED Y-AXIS: 30M/MIN MAXIMUM PIECE WEIGHT: 200KG EQUIPMENT: - CNC LABOD CONTROL UNIT - DESKTOP PC PROGRAMMING SOFTWARE - 6-WAY REVOTOOL - 2X CLAMPS - EXTRACTION OF THE PUNCHED OUT PIECES - REPOSITIONING UP TO 10M UND CLAMP MOVEMENT WITHOUT PLATE CONTACT - DIVERSE TOOLS - USER MANUAL
Vendedor: OSKAR BROZIAT GMBH & CO.KG MASCHINEN + SERVICE
Año de construcción: usado
Ubicación: Land-tools: 1 whip, 1 four wing beater, 1 two wing beater (like a guitar)\r\nbowls stainless steel include trolley TOOLS: 1 WHIP, 1 FOUR WING BEATER, 1 TWO WING BEATER (LIKE A GUITAR)\R\NBOWLS STAINLESS STEEL INCLUDE TROLLEY
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-manufactured by union (germany)
spindle diameter, mm 110
max. drilling diameter, mm 630
spindle cone, metric 50
table size, mm 1250 x 1400
travel x axis, mm 1940
travel y axis, mm 1250
travel w axis, mm 800
travel z axis, mm 1240
travel u axis, mm 250
table rotation, degrees 360
table positioning, optical, degrees 4x90
table load, kg 6300
spindle speeds, rpm 5,6...1120
feed of x axis, mm/min 5...2000
feed of y axis, mm/min 5...2000
feed of z axis, mm/min 2...2000
rapid feed of x axis, mm/min 6300
rapid feed of y axis, mm/min 6300
rapid feed of z axis, mm/min 4000
main motor capacity, kw 15
power required, kw 40
machine weight, kg 27700

the hbm is in excellent condition. machine is fully complete. it is equipped with swivel box table, milling heads, faceplate, tail-stock and tools. the angle table which is  visible in the picture is not included. MANUFACTURED BY UNION (GERMANY) SPINDLE DIAMETER, MM 110 MAX. DRILLING DIAMETER, MM 630 SPINDLE CONE, METRIC 50 TABLE SIZE, MM 1250 X 1400 TRAVEL X AXIS, MM 1940 TRAVEL Y AXIS, MM 1250 TRAVEL W AXIS, MM 800 TRAVEL Z AXIS, MM 1240 TRAVEL U AXIS, MM 250 TABLE ROTATION, DEGREES 360 TABLE POSITIONING, OPTICAL, DEGREES 4X90 TABLE LOAD, KG 6300 SPINDLE SPEEDS, RPM 5,6...1120 FEED OF X AXIS, MM/MIN 5...2000 FEED OF Y AXIS, MM/MIN 5...2000 FEED OF Z AXIS, MM/MIN 2...2000 RAPID FEED OF X AXIS, MM/MIN 6300 RAPID FEED OF Y AXIS, MM/MIN 6300 RAPID FEED OF Z AXIS, MM/MIN 4000 MAIN MOTOR CAPACITY, KW 15 POWER REQUIRED, KW 40 MACHINE WEIGHT, KG 27700 THE HBM IS IN EXCELLENT CONDITION. MACHINE IS FULLY COMPLETE. IT IS EQUIPPED WITH SWIVEL BOX TABLE, MILLING HEADS, FACEPLATE, TAIL-STOCK AND TOOLS. THE ANGLE TABLE WHICH IS VISIBLE IN THE PICTURE IS NOT INCLUDED.
Vendedor: SCG, uab
Año de construcción: usado
Ubicación: Land-dimension: d 800, h 840, total h 2220 mm\r\nmixing arm 950 rpm (d mixing tools approx. 180 mm)\r\npower: 380 v,  1,5 kw, 950 rpm\r\n DIMENSION: D 800, H 840, TOTAL H 2220 MM\R\NMIXING ARM 950 RPM (D MIXING TOOLS APPROX. 180 MM)\R\NPOWER: 380 V, 1,5 KW, 950 RPM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 228.000 €
Ubicación: Land-

a 1 122  
1 alfa laval aseptische production plant
for high viscous  products 
manufacturered with extruder technique
with 2 equal constructed bag in box filling machines
transposable (see vidio) to barrel filling in 30 min.
for products as there are:
jam, fruit preparations or mash products based  of
fruits as for example bananas, mango or other hard fruits
and potatos, what is making the plant in the moment
manufacturer year is 2004
manufacturer is alfa laval
production place is finnland 
capacity: 1.600 kg product per hour
filling into 10or 20 kg aseptic bag in box an in barrels
with aseptic prepared barrel inlets.

existing about
pos. 1
extruder technique
1 extruder plant with slit sheet constructed as a drum
is horizontal installed with 4 different hole disk tools
length of the extruder 1,20 m, diameter is 35 cm.

prinziple by mash potatos productuon
the product, cut in small cubes, arrive the extruder 
together with water on the back side of the extruder.
the water will be separate through the slit sheet of 
the extruder and the fast cubical potatoes will be pressed 
through the hole disk tool,installed on the head of the 
extruder drum, what is turn around in the separating phase
with high speed.

the product, what is coming out of the extruder machine
is falling in a rectangular constructed balance tank
with a conical constructed bottom.
in the bottom of the tank a transport snoke bring the 
mash potatoes product in the inlet of a big mono pump.
length of the tank: 1,40 m, breadth is 0,75 m
the mono pump press the mash potatoes in 
the inlet of the first contherm machine
manufacturer is nemo, type: nno 45….
machine no. 352-183
pressure until to 20 bar
the nemo mono pump has a steam barriers installation
by the  slip ring sealing.  

pos. 2
1 contherm plant, existing about 7 single contherm machines
from the mono pump the product arrive the first 
2 contherm machines, where the product heat 
up to 135°. int. no.. he 27, he 28




after this 2 conterm machine the hot product 
arrive the 3. machine.int. no he 29

this machine is working a a heat holder.
after this is well done, the next 4 contherm machines 
cool down the product to under 25 °c.
all contherm machine are installed in a row.
int no. he  30,he 31 und he 32

every contherm machine has a steam barriers 
installation inside of  the slip ring sealings. 
the slip ring sealings are in a good condition. 

pos. 3
1 sterile tank
is installed on a frame in a horizontal position
direct neat the conthermplant in a high of nearly 3 m
manufacturer is alfa laval
type alsafe
content 1.500 l
manufacturer year: 2004
from this sterile tank the aseptic product  
will be desists over a sterile valve knot with 
sterile pressed air  into the balance tank of the 
asetpo bag in  box or barrel filling machine.

pos. 4
cip plant 
on the other side of the contherm plant is installed
a small cip plant.
the cip plant with balance tank, pump and a electronic 
cabinet and with an alfa laval own alfast electronic software 
is standing on a stable frame.


pos. 5
2 equal constructed, aseptic working astepo 
bag in box filling machine
space: 2,4 m x 3,50 m (included electronic cabinet)
high: 2,20 m
type: caf
manufacturer year is 2004
manufacturer is astepo, belongs to alfa laval.
bag sizes: until to 20 kg by bag in box filling
220 kg barrel filling can start after a transposition time 
of 30 minutes
with a bag transport system out of the packaging
with automatic working bag sticking system and product filling
wirh a automatc working bag closing system under an aseptic 
atmosphere.
with a automatic working bag transport conveyor outside 
of the filling machine 
with a roller conveyor for the barrel transport into the filling 
station and out of the filling station, moving by hand.



for the transposition time from bag to barrel filling orreversely
need 30 min ro do all. for this work please have a look to 
the attached vidio.


price from site, net: 228.000,00 euro
  A 1 122 1 ALFA LAVAL ASEPTISCHE PRODUCTION PLANT FOR HIGH VISCOUS PRODUCTS MANUFACTURERED WITH EXTRUDER TECHNIQUE WITH 2 EQUAL CONSTRUCTED BAG IN BOX FILLING MACHINES TRANSPOSABLE (SEE VIDIO) TO BARREL FILLING IN 30 MIN. FOR PRODUCTS AS THERE ARE: JAM, FRUIT PREPARATIONS OR MASH PRODUCTS BASED OF FRUITS AS FOR EXAMPLE BANANAS, MANGO OR OTHER HARD FRUITS AND POTATOS, WHAT IS MAKING THE PLANT IN THE MOMENT MANUFACTURER YEAR IS 2004 MANUFACTURER IS ALFA LAVAL PRODUCTION PLACE IS FINNLAND CAPACITY: 1.600 KG PRODUCT PER HOUR FILLING INTO 10OR 20 KG ASEPTIC BAG IN BOX AN IN BARRELS WITH ASEPTIC PREPARED BARREL INLETS. EXISTING ABOUT POS. 1 EXTRUDER TECHNIQUE 1 EXTRUDER PLANT WITH SLIT SHEET CONSTRUCTED AS A DRUM IS HORIZONTAL INSTALLED WITH 4 DIFFERENT HOLE DISK TOOLS LENGTH OF THE EXTRUDER 1,20 M, DIAMETER IS 35 CM. PRINZIPLE BY MASH POTATOS PRODUCTUON THE PRODUCT, CUT IN SMALL CUBES, ARRIVE THE EXTRUDER TOGETHER WITH WATER ON THE BACK SIDE OF THE EXTRUDER. THE WATER WILL BE SEPARATE THROUGH THE SLIT SHEET OF THE EXTRUDER AND THE FAST CUBICAL POTATOES WILL BE PRESSED THROUGH THE HOLE DISK TOOL,INSTALLED ON THE HEAD OF THE EXTRUDER DRUM, WHAT IS TURN AROUND IN THE SEPARATING PHASE WITH HIGH SPEED. THE PRODUCT, WHAT IS COMING OUT OF THE EXTRUDER MACHINE IS FALLING IN A RECTANGULAR CONSTRUCTED BALANCE TANK WITH A CONICAL CONSTRUCTED BOTTOM. IN THE BOTTOM OF THE TANK A TRANSPORT SNOKE BRING THE MASH POTATOES PRODUCT IN THE INLET OF A BIG MONO PUMP. LENGTH OF THE TANK: 1,40 M, BREADTH IS 0,75 M THE MONO PUMP PRESS THE MASH POTATOES IN THE INLET OF THE FIRST CONTHERM MACHINE MANUFACTURER IS NEMO, TYPE: NNO 45…. MACHINE NO. 352-183 PRESSURE UNTIL TO 20 BAR THE NEMO MONO PUMP HAS A STEAM BARRIERS INSTALLATION BY THE SLIP RING SEALING. POS. 2 1 CONTHERM PLANT, EXISTING ABOUT 7 SINGLE CONTHERM MACHINES FROM THE MONO PUMP THE PRODUCT ARRIVE THE FIRST 2 CONTHERM MACHINES, WHERE THE PRODUCT HEAT UP TO 135°. INT. NO.. HE 27, HE 28 AFTER THIS 2 CONTERM MACHINE THE HOT PRODUCT ARRIVE THE 3. MACHINE.INT. NO HE 29 THIS MACHINE IS WORKING A A HEAT HOLDER. AFTER THIS IS WELL DONE, THE NEXT 4 CONTHERM MACHINES COOL DOWN THE PRODUCT TO UNDER 25 °C. ALL CONTHERM MACHINE ARE INSTALLED IN A ROW. INT NO. HE 30,HE 31 UND HE 32 EVERY CONTHERM MACHINE HAS A STEAM BARRIERS INSTALLATION INSIDE OF THE SLIP RING SEALINGS. THE SLIP RING SEALINGS ARE IN A GOOD CONDITION. POS. 3 1 STERILE TANK IS INSTALLED ON A FRAME IN A HORIZONTAL POSITION DIRECT NEAT THE CONTHERMPLANT IN A HIGH OF NEARLY 3 M MANUFACTURER IS ALFA LAVAL TYPE ALSAFE CONTENT 1.500 L MANUFACTURER YEAR: 2004 FROM THIS STERILE TANK THE ASEPTIC PRODUCT WILL BE DESISTS OVER A STERILE VALVE KNOT WITH STERILE PRESSED AIR INTO THE BALANCE TANK OF THE ASETPO BAG IN BOX OR BARREL FILLING MACHINE. POS. 4 CIP PLANT ON THE OTHER SIDE OF THE CONTHERM PLANT IS INSTALLED A SMALL CIP PLANT. THE CIP PLANT WITH BALANCE TANK, PUMP AND A ELECTRONIC CABINET AND WITH AN ALFA LAVAL OWN ALFAST ELECTRONIC SOFTWARE IS STANDING ON A STABLE FRAME. POS. 5 2 EQUAL CONSTRUCTED, ASEPTIC WORKING ASTEPO BAG IN BOX FILLING MACHINE SPACE: 2,4 M X 3,50 M (INCLUDED ELECTRONIC CABINET) HIGH: 2,20 M TYPE: CAF MANUFACTURER YEAR IS 2004 MANUFACTURER IS ASTEPO, BELONGS TO ALFA LAVAL. BAG SIZES: UNTIL TO 20 KG BY BAG IN BOX FILLING 220 KG BARREL FILLING CAN START AFTER A TRANSPOSITION TIME OF 30 MINUTES WITH A BAG TRANSPORT SYSTEM OUT OF THE PACKAGING WITH AUTOMATIC WORKING BAG STICKING SYSTEM AND PRODUCT FILLING WIRH A AUTOMATC WORKING BAG CLOSING SYSTEM UNDER AN ASEPTIC ATMOSPHERE. WITH A AUTOMATIC WORKING BAG TRANSPORT CONVEYOR OUTSIDE OF THE FILLING MACHINE WITH A ROLLER CONVEYOR FOR THE BARREL TRANSPORT INTO THE FILLING STATION AND OUT OF THE FILLING STATION, MOVING BY HAND. FOR THE TRANSPOSITION TIME FROM BAG TO BARREL FILLING ORREVERSELY NEED 30 MIN RO DO ALL. FOR THIS WORK PLEASE HAVE A LOOK TO THE ATTACHED VIDIO. PRICE FROM SITE, NET: 228.000,00 EURO
Vendedor: LM Dairy Consulting
Año de construcción: usado
Precio: 34.500 EU€
Ubicación: Land-plasma cutter ajan shp 260a is a numerically controlled oxygen sheet cutting device, using original cutting tools mounted on it, and can be gas and plasma tools. with these tools you can make straight cuts and linear cuts, according to programmed cutting programs or by manually controlling the cutting path. condition of the equipment good. PLASMA CUTTER AJAN SHP 260A IS A NUMERICALLY CONTROLLED OXYGEN SHEET CUTTING DEVICE, USING ORIGINAL CUTTING TOOLS MOUNTED ON IT, AND CAN BE GAS AND PLASMA TOOLS. WITH THESE TOOLS YOU CAN MAKE STRAIGHT CUTS AND LINEAR CUTS, ACCORDING TO PROGRAMMED CUTTING PROGRAMS OR BY MANUALLY CONTROLLING THE CUTTING PATH. CONDITION OF THE EQUIPMENT GOOD.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-machine type: start hole edm machine manufacturer/brand: mb maschinen gmbh type: mb eco drill nc year of build: 2006 control type: conventional niwul
availability: from immediately machine status: removed technical details: eco drill nc control: eco nc / win xp b: 2006 is in the 1a state machine MACHINE TYPE: START HOLE EDM MACHINE MANUFACTURER/BRAND: MB MASCHINEN GMBH TYPE: MB ECO DRILL NC YEAR OF BUILD: 2006 CONTROL TYPE: CONVENTIONAL NIWUL AVAILABILITY: FROM IMMEDIATELY MACHINE STATUS: REMOVED TECHNICAL DETAILS: ECO DRILL NC CONTROL: ECO NC / WIN XP B: 2006 IS IN THE 1A STATE MACHINE
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 1200 mm<br/>y-travel: 500 mm<br/>z-travel: 450 mm<br/>table-size: 1600 x 340 mm<br/>spindle taper iso: 50 sk<br/>spindle turning speed range: 28 - 1400 u/min<br/>voltage: 380 v<br/>quill stroke: 125 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 2,8 t<br/>dimensions of the machine ca.: 2,0 x 2,1 x 2,3 m<br/>- digital display<br/>- quill with feed<br/>- coolant system<br/>- centrically exciting vise jaw width 220mm<br/>- some sk50 tools<br/><br/><br/><br/><br/> X-TRAVEL: 1200 MM
Y-TRAVEL: 500 MM
Z-TRAVEL: 450 MM
TABLE-SIZE: 1600 X 340 MM
SPINDLE TAPER ISO: 50 SK
SPINDLE TURNING SPEED RANGE: 28 - 1400 U/MIN
VOLTAGE: 380 V
QUILL STROKE: 125 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 2,8 T
DIMENSIONS OF THE MACHINE CA.: 2,0 X 2,1 X 2,3 M
- DIGITAL DISPLAY
- QUILL WITH FEED
- COOLANT SYSTEM
- CENTRICALLY EXCITING VISE JAW WIDTH 220MM
- SOME SK50 TOOLS




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-manufactured by sverdlov plant (russia)
year of manufacture 1985
spindle diameter, mm 160
table size, mm 1600 x 1800
max. work piece weight, kg 10000
table cross movement (x), mm 2000
table longitudinal movement (w), mm 1600
max. movement of spindle head (y), mm 1600
max. spindle horizontal movement (z), mm 1000
table round movement (b), degrees 360
feeds of x/y/y/w axes, mm/min 2...2000
rapid feed of x/y/w axes, m/min 5
rapid feed of z axis, m/min 4
spindle speed range, rpm 5...1000
spindle feed range, mm/min 2...2000
spindle head feed range, mm/min 2...2000
total power required, kw 35,5
machine dimensions, mm 5622 x 8160 x 5135
machine weight, kg 33337

the horizontal boring machine is in excellent condition. it is equipped with heidenhain dro, faceplate and some tools. MANUFACTURED BY SVERDLOV PLANT (RUSSIA) YEAR OF MANUFACTURE 1985 SPINDLE DIAMETER, MM 160 TABLE SIZE, MM 1600 X 1800 MAX. WORK PIECE WEIGHT, KG 10000 TABLE CROSS MOVEMENT (X), MM 2000 TABLE LONGITUDINAL MOVEMENT (W), MM 1600 MAX. MOVEMENT OF SPINDLE HEAD (Y), MM 1600 MAX. SPINDLE HORIZONTAL MOVEMENT (Z), MM 1000 TABLE ROUND MOVEMENT (B), DEGREES 360 FEEDS OF X/Y/Y/W AXES, MM/MIN 2...2000 RAPID FEED OF X/Y/W AXES, M/MIN 5 RAPID FEED OF Z AXIS, M/MIN 4 SPINDLE SPEED RANGE, RPM 5...1000 SPINDLE FEED RANGE, MM/MIN 2...2000 SPINDLE HEAD FEED RANGE, MM/MIN 2...2000 TOTAL POWER REQUIRED, KW 35,5 MACHINE DIMENSIONS, MM 5622 X 8160 X 5135 MACHINE WEIGHT, KG 33337 THE HORIZONTAL BORING MACHINE IS IN EXCELLENT CONDITION. IT IS EQUIPPED WITH HEIDENHAIN DRO, FACEPLATE AND SOME TOOLS.
Vendedor: SCG, uab
Año de construcción: usado
Ubicación: Land-x-travel: 610 mm<br/>y-travel: 410 mm<br/>z-travel: 530 mm<br/>control: ultimax <br/>weight of the machine ca.: 4,4 t<br/>ultimax control<br/>20-fold atc<br/>coolant device<br/>spindle cooling<br/>chip tank<br/><br/>machine in mechanical good condition<br/>main spindle is silent<br/>sometimes stoped the atc , switchproblem ?!<br/><br/>technische daten / technical details:<br/>x-weg / x-travel    610    mm<br/>y-weg / y-travel    410    mm<br/>z-weg / z-travel    530    mm<br/>spindelaufnahme / spindle taper    sk 40    <br/>drehzahlbereich / spindle speed    6000    upm /rpm<br/>tisch/table    850x400    mm<br/>eilgang x, y, z / rapid feed x, y, z    10    m/min<br/>werkzeugwechselmagazinplätze / number of tools in changer    20    <br/>gewicht ca. / weight ca.    4400    kg<br/>technische daten, zubehör und beschreibung der maschine sind unverbindlich - <br/><br/><br/><br/><br/><br/> X-TRAVEL: 610 MM
Y-TRAVEL: 410 MM
Z-TRAVEL: 530 MM
CONTROL: ULTIMAX
WEIGHT OF THE MACHINE CA.: 4,4 T
ULTIMAX CONTROL
20-FOLD ATC
COOLANT DEVICE
SPINDLE COOLING
CHIP TANK

MACHINE IN MECHANICAL GOOD CONDITION
MAIN SPINDLE IS SILENT
SOMETIMES STOPED THE ATC , SWITCHPROBLEM ?!

TECHNISCHE DATEN / TECHNICAL DETAILS:
X-WEG / X-TRAVEL 610 MM
Y-WEG / Y-TRAVEL 410 MM
Z-WEG / Z-TRAVEL 530 MM
SPINDELAUFNAHME / SPINDLE TAPER SK 40
DREHZAHLBEREICH / SPINDLE SPEED 6000 UPM /RPM
TISCH/TABLE 850X400 MM
EILGANG X, Y, Z / RAPID FEED X, Y, Z 10 M/MIN
WERKZEUGWECHSELMAGAZINPLäTZE / NUMBER OF TOOLS IN CHANGER 20
GEWICHT CA. / WEIGHT CA. 4400 KG
TECHNISCHE DATEN, ZUBEHöR UND BESCHREIBUNG DER MASCHINE SIND UNVERBINDLICH -





Vendedor: SKM Industriemaschinen
Año de construcción: usado
Ubicación: Land-control fanuc ott
bar diameter 32 mm
2x 10-station turret with driven tools
linear carrier for 6 tools
subspindle
bar loader fmb turbo
 CONTROL FANUC OTT BAR DIAMETER 32 MM 2X 10-STATION TURRET WITH DRIVEN TOOLS LINEAR CARRIER FOR 6 TOOLS SUBSPINDLE BAR LOADER FMB TURBO
Vendedor: WMH24
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 1000 mm<br/>description: see photo WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 1000 MM
DESCRIPTION: SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-control fanuc 18-t
bar diameter 50 mm
main / sub spindle
spindle speed 4000 1 / min
2x 12/10-station turret with driven tools
bar loader fmb turo 10-65
chip conveyor  CONTROL FANUC 18-T BAR DIAMETER 50 MM MAIN / SUB SPINDLE SPINDLE SPEED 4000 1 / MIN 2X 12/10-STATION TURRET WITH DRIVEN TOOLS BAR LOADER FMB TURO 10-65 CHIP CONVEYOR
Vendedor: WMH24
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 300 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 700 mm<br/>description: see photo WEIGHT APPROX.: 300 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 700 MM
DESCRIPTION: SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-control heidenhain itnc 530
travel x / y / z 1050/530/630 mm
spindle speed 10000 1 / min
tool magazine for 30 tools sk40
internal coolant 20 bar
3d infrared touch probe
chip conveyor
  CONTROL HEIDENHAIN ITNC 530 TRAVEL X / Y / Z 1050/530/630 MM SPINDLE SPEED 10000 1 / MIN TOOL MAGAZINE FOR 30 TOOLS SK40 INTERNAL COOLANT 20 BAR 3D INFRARED TOUCH PROBE CHIP CONVEYOR
Vendedor: WMH24
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-weight approx.: 250 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 1000 mm<br/>description: see photo WEIGHT APPROX.: 250 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 1000 MM
DESCRIPTION: SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-control system: prototrak smx	
table: 355 x 1372 mm	
travel distances:	
x: 780 mm	
y: 505 mm	
z: 500 mm	
double-sided spindle rotation + - 90	
tool holder: iso 40	
spindle speed: 60 - 5000 rpm	
motor power 3.75 kw	
machine weight: 2300 kg	
accessories:	
30 tool holders	
collet	
two vise clamps	
central lubrication
  CONTROL SYSTEM: PROTOTRAK SMX TABLE: 355 X 1372 MM TRAVEL DISTANCES: X: 780 MM Y: 505 MM Z: 500 MM DOUBLE-SIDED SPINDLE ROTATION + - 90 TOOL HOLDER: ISO 40 SPINDLE SPEED: 60 - 5000 RPM MOTOR POWER 3.75 KW MACHINE WEIGHT: 2300 KG ACCESSORIES: 30 TOOL HOLDERS COLLET TWO VISE CLAMPS CENTRAL LUBRICATION
Vendedor: AMARON s.r.o.
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 1000 mm<br/>description: see photo WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 1000 MM
DESCRIPTION: SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-grapha müller progress 1986, 4 color 

dampening system: wet offset, cooler and circulating unit

with turnbars between unit 1 & 2 and 2 & 3.

process unit with file hole tools, formaliner tools (schober) double crossperf. cylinders.

folder for 4” , 6” , 8” , 8 1/2” and 12”. 50” rewinder. central tank for dampening water with cooling and special device for cooling of ink form rollers.


max speed 1500ft/min. 

central oil greasing.

format cassettes: 4 x 24” and 4 x 25½”.

still under power in very good condition. can ship worldwide!
 GRAPHA MüLLER PROGRESS 1986, 4 COLOR DAMPENING SYSTEM: WET OFFSET, COOLER AND CIRCULATING UNIT WITH TURNBARS BETWEEN UNIT 1 & 2 AND 2 & 3. PROCESS UNIT WITH FILE HOLE TOOLS, FORMALINER TOOLS (SCHOBER) DOUBLE CROSSPERF. CYLINDERS. FOLDER FOR 4” , 6” , 8” , 8 1/2” AND 12”. 50” REWINDER. CENTRAL TANK FOR DAMPENING WATER WITH COOLING AND SPECIAL DEVICE FOR COOLING OF INK FORM ROLLERS. MAX SPEED 1500FT/MIN. CENTRAL OIL GREASING. FORMAT CASSETTES: 4 X 24” AND 4 X 25½”. STILL UNDER POWER IN VERY GOOD CONDITION. CAN SHIP WORLDWIDE!
Vendedor: TISKSTROJ - CORUM
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 1000 mm<br/>description: see photo WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 1000 MM
DESCRIPTION: SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-overview
brand: yang
model: ml - 25a 
application type: turning 
machine type: lathes 
availability: immediately 
production year: 1996 
location: the netherlands 
origin country: taiwan 
production hours: 17000

general data
measurements width: 4000 mm 
measurements depth: 2000 mm 
measurements height: 2200 mm 
machine weight: 5000 kg

control unit
brand: fanuc
model: series 0-t
cnc main language: english 
cnc language customizable: yes

main drive
number of spindles: 1
spindle speed range: 45 - 4500 rpm

movement
x-axis movement: 216 mm 
y-axis movement: 520 mm

workpiece
workpiece drm: 250 mm
workpiece x: 20 m/min 
workpiece z: 12 m/min

turret
number of turrets: 1

tools
slots in storage: 8
max tool diameter: 85 mm 
type of tool holder: vdi40

media
main electronic connection: 380 v 
chip conveyor: yes
internal cooling: yes

see full technical specifications of this machine at:
abc://bit.ly/2ru5klc OVERVIEW BRAND: YANG MODEL: ML - 25A APPLICATION TYPE: TURNING MACHINE TYPE: LATHES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 1996 LOCATION: THE NETHERLANDS ORIGIN COUNTRY: TAIWAN PRODUCTION HOURS: 17000 GENERAL DATA MEASUREMENTS WIDTH: 4000 MM MEASUREMENTS DEPTH: 2000 MM MEASUREMENTS HEIGHT: 2200 MM MACHINE WEIGHT: 5000 KG CONTROL UNIT BRAND: FANUC MODEL: SERIES 0-T CNC MAIN LANGUAGE: ENGLISH CNC LANGUAGE CUSTOMIZABLE: YES MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 45 - 4500 RPM MOVEMENT X-AXIS MOVEMENT: 216 MM Y-AXIS MOVEMENT: 520 MM WORKPIECE WORKPIECE DRM: 250 MM WORKPIECE X: 20 M/MIN WORKPIECE Z: 12 M/MIN TURRET NUMBER OF TURRETS: 1 TOOLS SLOTS IN STORAGE: 8 MAX TOOL DIAMETER: 85 MM TYPE OF TOOL HOLDER: VDI40 MEDIA MAIN ELECTRONIC CONNECTION: 380 V CHIP CONVEYOR: YES INTERNAL COOLING: YES SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2RU5KLC
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 1000 mm<br/>description: see photo WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 1000 MM
DESCRIPTION: SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-overview
brand: bridgeport
model: vmc 800 22
application type: milling
machine type: machining centers (vertical) 
availability: immediately
production year: 2001 
location: the netherlands 
origin country: united kingdom 
production hours: 32400

general data
measurements width: 2980 mm 
measurements depth: 2200 mm 
measurements height: 2570 mm 
machine weight: 3750 kg

control unit
brand: heidenhain
model: tnc 410
cnc main language: english 
cnc language customizable: yes

main drive
number of spindles: 1
spindle speed range: 6000 rpm

movement
x-axis movement: 800 mm 
y-axis movement: 510 mm 
z-axis movement: 510 mm

workpiece
workpiece weight: 750 kg

table
outer length: 1000 mm 
outer width: 490 mm

tools
slots in storage: 22
max weight: 6 kg
max tool diameter: 130 mm 
max tool length: 250 mm

media
main electronic connection: 420 v 
power consumption: 20 kva 
internal cooling: yes

see full technical specifications of this machine at:
abc://bit.ly/2z8bxw5 OVERVIEW BRAND: BRIDGEPORT MODEL: VMC 800 22 APPLICATION TYPE: MILLING MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2001 LOCATION: THE NETHERLANDS ORIGIN COUNTRY: UNITED KINGDOM PRODUCTION HOURS: 32400 GENERAL DATA MEASUREMENTS WIDTH: 2980 MM MEASUREMENTS DEPTH: 2200 MM MEASUREMENTS HEIGHT: 2570 MM MACHINE WEIGHT: 3750 KG CONTROL UNIT BRAND: HEIDENHAIN MODEL: TNC 410 CNC MAIN LANGUAGE: ENGLISH CNC LANGUAGE CUSTOMIZABLE: YES MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 6000 RPM MOVEMENT X-AXIS MOVEMENT: 800 MM Y-AXIS MOVEMENT: 510 MM Z-AXIS MOVEMENT: 510 MM WORKPIECE WORKPIECE WEIGHT: 750 KG TABLE OUTER LENGTH: 1000 MM OUTER WIDTH: 490 MM TOOLS SLOTS IN STORAGE: 22 MAX WEIGHT: 6 KG MAX TOOL DIAMETER: 130 MM MAX TOOL LENGTH: 250 MM MEDIA MAIN ELECTRONIC CONNECTION: 420 V POWER CONSUMPTION: 20 KVA INTERNAL COOLING: YES SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2Z8BXW5
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 10000 kg<br/>dimensions (l x w x h) approx.: 3000 x 2500 x 2100 mm<br/>description: with bend protection,<br> several bending tool diameters,<br> accessories:<br> -various of bending tools and bending rollers<br> see the screenshot from the manufacturer page(details are not guaranteed)<br> WEIGHT APPROX.: 10000 KG
DIMENSIONS (L X W X H) APPROX.: 3000 X 2500 X 2100 MM
DESCRIPTION: WITH BEND PROTECTION,
SEVERAL BENDING TOOL DIAMETERS,
ACCESSORIES:
-VARIOUS OF BENDING TOOLS AND BENDING ROLLERS
SEE THE SCREENSHOT FROM THE MANUFACTURER PAGE(DETAILS ARE NOT GUARANTEED)
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-x, y, z-way: 635 x 510 x 460 mm table clamping range: 790 x 560 mm
the machine is in good technical condition, the possibility of testing, by prior arrangement. number of tools: 20 spindle taper: iso sk 40 spindle speed: 8,000 min / -1 control system: siemens 810 d powerline X, Y, Z-WAY: 635 X 510 X 460 MM TABLE CLAMPING RANGE: 790 X 560 MM THE MACHINE IS IN GOOD TECHNICAL CONDITION, THE POSSIBILITY OF TESTING, BY PRIOR ARRANGEMENT. NUMBER OF TOOLS: 20 SPINDLE TAPER: ISO SK 40 SPINDLE SPEED: 8,000 MIN / -1 CONTROL SYSTEM: SIEMENS 810 D POWERLINE
Vendedor: CEE-Machines
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 1000 mm<br/>description: see photo WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 1000 MM
DESCRIPTION: SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 69.000 €
Ubicación: Land-tools driven year 2003 with 8 and 39 holders type v4

good condition immediately abzugebn under current TOOLS DRIVEN YEAR 2003 WITH 8 AND 39 HOLDERS TYPE V4 GOOD CONDITION IMMEDIATELY ABZUGEBN UNDER CURRENT
Vendedor: CMH Trading U.G.
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 850 mm<br/>description: see photo WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 850 MM
DESCRIPTION: SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cnc vtl
mazak mega gymnastics ta 12 mill centre
year 1989
table diameter: 1250 mm
max swing: 1450 mm
max workpiece hight: 1250 mm
ram head with tool changer
tool magazine capacity: 30 tools
rotary tool shank cat #50 cat # 40 vertical rotary horizontal rotary
z travel: 800 mm
2 pallets dia 1200 mm
cnc mazatrol cam t3 CNC VTL MAZAK MEGA GYMNASTICS TA 12 MILL CENTRE YEAR 1989 TABLE DIAMETER: 1250 MM MAX SWING: 1450 MM MAX WORKPIECE HIGHT: 1250 MM RAM HEAD WITH TOOL CHANGER TOOL MAGAZINE CAPACITY: 30 TOOLS ROTARY TOOL SHANK CAT #50 CAT # 40 VERTICAL ROTARY HORIZONTAL ROTARY Z TRAVEL: 800 MM 2 PALLETS DIA 1200 MM CNC MAZATROL CAM T3
Vendedor: Bips Infotech GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 660 mm<br/>description: see photo WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 660 MM
DESCRIPTION: SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-we offer a large number of endoprosthesis and accessories for their surgery.
complete sets in containers and individual parts and tools.
offer for the complete inventory according to photo documentation desired.
if you are interested, more pictures can be sent to your own e-mail address. 
the pictures attached represent only a small part of the entire stock.

a personal inspection on site is possible as well.
the highest bid will be awarded


looking forward to your offer.
     WE OFFER A LARGE NUMBER OF ENDOPROSTHESIS AND ACCESSORIES FOR THEIR SURGERY. COMPLETE SETS IN CONTAINERS AND INDIVIDUAL PARTS AND TOOLS. OFFER FOR THE COMPLETE INVENTORY ACCORDING TO PHOTO DOCUMENTATION DESIRED. IF YOU ARE INTERESTED, MORE PICTURES CAN BE SENT TO YOUR OWN E-MAIL ADDRESS. THE PICTURES ATTACHED REPRESENT ONLY A SMALL PART OF THE ENTIRE STOCK. A PERSONAL INSPECTION ON SITE IS POSSIBLE AS WELL. THE HIGHEST BID WILL BE AWARDED LOOKING FORWARD TO YOUR OFFER.
Vendedor: Mobil-tec Elektronik Gmbh
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 900 mm<br/>description: see photo WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 900 MM
DESCRIPTION: SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 25.900 €
Ubicación: Land-heidenhain control 430 glass scales, siemens technology.
x axis: 700 mm y axis: 600 mm z axis: 450 mm spindle speed of 24000 rpm spindle power 24 kw spindle retainer hsk 63 tool magazine 20 tools,.
overall performance has been overhauled 46 kw weight 8000 kg accessories chip conveyor electronic hand wheel, spindle only by skf, then the machine is run only about 20 h. spindle is neuwertig.ca. 80-90 recordings can be purchased with.
the machine works very well. no internal coolant.
power-on hours 21580 h, spindle hours 6681 h total   HEIDENHAIN CONTROL 430 GLASS SCALES, SIEMENS TECHNOLOGY. X AXIS: 700 MM Y AXIS: 600 MM Z AXIS: 450 MM SPINDLE SPEED OF 24000 RPM SPINDLE POWER 24 KW SPINDLE RETAINER HSK 63 TOOL MAGAZINE 20 TOOLS,. OVERALL PERFORMANCE HAS BEEN OVERHAULED 46 KW WEIGHT 8000 KG ACCESSORIES CHIP CONVEYOR ELECTRONIC HAND WHEEL, SPINDLE ONLY BY SKF, THEN THE MACHINE IS RUN ONLY ABOUT 20 H. SPINDLE IS NEUWERTIG.CA. 80-90 RECORDINGS CAN BE PURCHASED WITH. THE MACHINE WORKS VERY WELL. NO INTERNAL COOLANT. POWER-ON HOURS 21580 H, SPINDLE HOURS 6681 H TOTAL
Vendedor: Engelbrecht GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 80 €
Ubicación: Land-weight approx.: 20 kg<br/>dimensions (l x w x h) approx.: 400 x 250 x 100 mm<br/>description: tools and reamers WEIGHT APPROX.: 20 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 250 X 100 MM
DESCRIPTION: TOOLS AND REAMERS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 4.500 €
Ubicación: Land--two colours max size 36x52 cms. with 1/1 or 2/0 
-year 1997, 24 mil. original copies 
-rolandmatic dampening 
-np group with all accessories 
-in production, complete with all manuals, tools -TWO COLOURS MAX SIZE 36X52 CMS. WITH 1/1 OR 2/0 -YEAR 1997, 24 MIL. ORIGINAL COPIES -ROLANDMATIC DAMPENING -NP GROUP WITH ALL ACCESSORIES -IN PRODUCTION, COMPLETE WITH ALL MANUALS, TOOLS
Vendedor: MG Macchine Grafiche
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 20 kg<br/>dimensions (l x w x h) approx.: 400 x 250 x 100 mm<br/>description: lot of 15 tools WEIGHT APPROX.: 20 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 250 X 100 MM
DESCRIPTION: LOT OF 15 TOOLS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-mechanical vise manufacturer: bison

jaw width 250 mm
 bdp3dowtma
 jaw height 85 mm

at the moment, we have 2 in stock! MECHANICAL VISE MANUFACTURER: BISON JAW WIDTH 250 MM BDP3DOWTMA JAW HEIGHT 85 MM AT THE MOMENT, WE HAVE 2 IN STOCK!
Vendedor: RM-Industrieservice Lager und Büro
Año de construcción: usado
Precio: used machinery auction RESALE 250 €
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 0 x 0 x 0 mm<br/>description: - WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 0 X 0 X 0 MM
DESCRIPTION: -
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-plate thickness max.: 6mm
working length: 1.000mm
working width: 200mm
angle range: 30 - 140°
stroke sequence max.: 60 1/min
drive power: 5,5kw

equipment:
- hydraulic angle adjustment
- blade length 200mm
- 4mm plate thickness stainless steel
- digital stroke adjustment
- table dimension 1.000x1.620mm with t-notches,
bress scales, inner stop and 2x adjustable table stops
- automatic cutting kerf adjustment
- 2x plate downholder

* additional working station for punching, bending and cutting
- with digital stroke adjustment
- fast tool changing system for punching
- punching power: 20t
- throat: 300mm
- maximum punching diameter: 90mm
- diverse punching tools
- bedienanleitung PLATE THICKNESS MAX.: 6MM WORKING LENGTH: 1.000MM WORKING WIDTH: 200MM ANGLE RANGE: 30 - 140° STROKE SEQUENCE MAX.: 60 1/MIN DRIVE POWER: 5,5KW EQUIPMENT: - HYDRAULIC ANGLE ADJUSTMENT - BLADE LENGTH 200MM - 4MM PLATE THICKNESS STAINLESS STEEL - DIGITAL STROKE ADJUSTMENT - TABLE DIMENSION 1.000X1.620MM WITH T-NOTCHES, BRESS SCALES, INNER STOP AND 2X ADJUSTABLE TABLE STOPS - AUTOMATIC CUTTING KERF ADJUSTMENT - 2X PLATE DOWNHOLDER * ADDITIONAL WORKING STATION FOR PUNCHING, BENDING AND CUTTING - WITH DIGITAL STROKE ADJUSTMENT - FAST TOOL CHANGING SYSTEM FOR PUNCHING - PUNCHING POWER: 20T - THROAT: 300MM - MAXIMUM PUNCHING DIAMETER: 90MM - DIVERSE PUNCHING TOOLS - BEDIENANLEITUNG
Vendedor: OSKAR BROZIAT GMBH & CO.KG MASCHINEN + SERVICE
Año de construcción: usado
Precio: used machinery auction RESALE 40 €
Ubicación: Land-weight approx.: 80 kg<br/>dimensions (l x w x h) approx.: 0 x 0 x 0 mm<br/>description: - WEIGHT APPROX.: 80 KG
DIMENSIONS (L X W X H) APPROX.: 0 X 0 X 0 MM
DESCRIPTION: -
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more SUPERMAX types: