1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-corners-plastering machine
sma-ref-6367
category: plastic window machinery of plastering machine
manufacturer: urban
type: sv 320
year of construction: 2002
spindle: 1.7 kw
work area: profile height: 35 bis195 mm
width: 25 mm to 145 mm
special features: set up for
rehau
geneo
werrkzeuge incl.
condition: ready to use
under current
location: schleswig-holstein
dimensions: weight: 550 kg
availability: immediately CORNERS-PLASTERING MACHINE SMA-REF-6367 CATEGORY: PLASTIC WINDOW MACHINERY OF PLASTERING MACHINE MANUFACTURER: URBAN TYPE: SV 320 YEAR OF CONSTRUCTION: 2002 SPINDLE: 1.7 KW WORK AREA: PROFILE HEIGHT: 35 BIS195 MM WIDTH: 25 MM TO 145 MM SPECIAL FEATURES: SET UP FOR REHAU GENEO WERRKZEUGE INCL. CONDITION: READY TO USE UNDER CURRENT LOCATION: SCHLESWIG-HOLSTEIN DIMENSIONS: WEIGHT: 550 KG AVAILABILITY: IMMEDIATELY
Vendedor: S-MA GmbH
Año de construcción: usado
Ubicación: Land-technical data baler<br/>manufacturer europress<br/>typ 6500 v5 h3<br/>year of construction 2009<br/>hours of operation 15,334 hours, stand january <br/>quantity of pressed bales 138,097 bales, stand january<br/>press power main press 120 tons<br/>specific press capacity 142 kg/cm²<br/>feed channel 1,650 x 1,100 mm (l x w)<br/>filling volume 3 m³<br/>capacity per cycle time 1,58 m³<br/>bale size 730 x 1,100 length variable<br/>driving motor 75 kw (1 x 30 kw + 1 x 45 kw, individually switchable)<br/>connected load 83 kw<br/>current consumption 150 a<br/>tying system 5-fold vertical, 3-fold horizontal, fully automatic (the uppermost horizontal needle channel is blocked)<br/>bale weight 450 to 900 kg, depending on bale length and material<br/>volume hydraulic oil tank 1,200 l<br/>sps controller (manuf., type)  siemens s7-200<br/>operating panel (manuf., type)  siemens touchscreen<br/>baler dimensions built up with hopper 13,465 x 5,200 x 5,074 mm<br/>transport dimensions only baler 9,965 x 2,500 x 2,900 mm (l x w x h)<br/>machine weight baler approx. 38 tons<br/><br/>technical data conveyor belt<br/>manufacturer<br/>typ kgf 1600<br/>year of construction 2009<br/>driving motor 7,5 kw<br/>belt speed 0,3 m/sec.<br/>centre distance 13,550 mm<br/>length feeding conveyor 6.100 mm<br/>length elevating conveyor 9.507 mm<br/>length goose neck 1,002 mm<br/>grade 30°<br/>effecting width 1,600 mm<br/>height drive axle over ground 4,000 mm<br/>height of side wall feeding conv. 600 mm<br/>height of side wall elevating conv. 800 mm<br/>pit dimensions 10,030 x 2,460 x 1,250 mm (l x w x d)<br/>weight approx. 28 tons<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  the press with conveyor belt is currently still in operation, the replacement with a new system is planned for the 2nd quarter of this year. inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. TECHNICAL DATA BALER
MANUFACTURER EUROPRESS
TYP 6500 V5 H3
YEAR OF CONSTRUCTION 2009
HOURS OF OPERATION 15,334 HOURS, STAND JANUARY
QUANTITY OF PRESSED BALES 138,097 BALES, STAND JANUARY
PRESS POWER MAIN PRESS 120 TONS
SPECIFIC PRESS CAPACITY 142 KG/CM²
FEED CHANNEL 1,650 X 1,100 MM (L X W)
FILLING VOLUME 3 M³
CAPACITY PER CYCLE TIME 1,58 M³
BALE SIZE 730 X 1,100 LENGTH VARIABLE
DRIVING MOTOR 75 KW (1 X 30 KW + 1 X 45 KW, INDIVIDUALLY SWITCHABLE)
CONNECTED LOAD 83 KW
CURRENT CONSUMPTION 150 A
TYING SYSTEM 5-FOLD VERTICAL, 3-FOLD HORIZONTAL, FULLY AUTOMATIC (THE UPPERMOST HORIZONTAL NEEDLE CHANNEL IS BLOCKED)
BALE WEIGHT 450 TO 900 KG, DEPENDING ON BALE LENGTH AND MATERIAL
VOLUME HYDRAULIC OIL TANK 1,200 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS S7-200
OPERATING PANEL (MANUF., TYPE) SIEMENS TOUCHSCREEN
BALER DIMENSIONS BUILT UP WITH HOPPER 13,465 X 5,200 X 5,074 MM
TRANSPORT DIMENSIONS ONLY BALER 9,965 X 2,500 X 2,900 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 38 TONS

TECHNICAL DATA CONVEYOR BELT
MANUFACTURER
TYP KGF 1600
YEAR OF CONSTRUCTION 2009
DRIVING MOTOR 7,5 KW
BELT SPEED 0,3 M/SEC.
CENTRE DISTANCE 13,550 MM
LENGTH FEEDING CONVEYOR 6.100 MM
LENGTH ELEVATING CONVEYOR 9.507 MM
LENGTH GOOSE NECK 1,002 MM
GRADE 30°
EFFECTING WIDTH 1,600 MM
HEIGHT DRIVE AXLE OVER GROUND 4,000 MM
HEIGHT OF SIDE WALL FEEDING CONV. 600 MM
HEIGHT OF SIDE WALL ELEVATING CONV. 800 MM
PIT DIMENSIONS 10,030 X 2,460 X 1,250 MM (L X W X D)
WEIGHT APPROX. 28 TONS

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. THE PRESS WITH CONVEYOR BELT IS CURRENTLY STILL IN OPERATION, THE REPLACEMENT WITH A NEW SYSTEM IS PLANNED FOR THE 2ND QUARTER OF THIS YEAR. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-mori seiki nz-s1500/500 cnc 2-turret shaft lathe

4 machines available! volkswagen

technical data

spindle speed 3500 rpm / 5.5 kw
spindle diameter 43 mm
revolver 6 stations capto c3
turret indexing time 0.18 s
bed length 530 mm
tailstock stroke 200 mm
tailstock spindle stroke 70 mmm
traverse path x 60 mm, z 580 mm
acceleration 0.5 g
speed 20 m / min
no available chip conveyor MORI SEIKI NZ-S1500/500 CNC 2-TURRET SHAFT LATHE 4 MACHINES AVAILABLE! VOLKSWAGEN TECHNICAL DATA SPINDLE SPEED 3500 RPM / 5.5 KW SPINDLE DIAMETER 43 MM REVOLVER 6 STATIONS CAPTO C3 TURRET INDEXING TIME 0.18 S BED LENGTH 530 MM TAILSTOCK STROKE 200 MM TAILSTOCK SPINDLE STROKE 70 MMM TRAVERSE PATH X 60 MM, Z 580 MM ACCELERATION 0.5 G SPEED 20 M / MIN NO AVAILABLE CHIP CONVEYOR
Vendedor: Asset-Trade - Bewertung & Vermarktung
Año de construcción: usado
Ubicación: Land-semi automatic, working width 400 mm, thickness 10 mm,\r\nlubrication system for the knives SEMI AUTOMATIC, WORKING WIDTH 400 MM, THICKNESS 10 MM,\R\NLUBRICATION SYSTEM FOR THE KNIVES
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-goodway
machine name  turning center
manufacturer  goodway
model gcl-2l
location transit
year of manufacturing 2001
technical specification:	
2 axis cnc turning centre 
400mm swing
220mm max machining diameter
600mm between centres
52mm bar capacity
4500rpm
12 station block turret
11kw spindle motor
fanuc otc control
programmable tailstock
swarf conveyor
8 GOODWAY MACHINE NAME TURNING CENTER MANUFACTURER GOODWAY MODEL GCL-2L LOCATION TRANSIT YEAR OF MANUFACTURING 2001 TECHNICAL SPECIFICATION: 2 AXIS CNC TURNING CENTRE 400MM SWING 220MM MAX MACHINING DIAMETER 600MM BETWEEN CENTRES 52MM BAR CAPACITY 4500RPM 12 STATION BLOCK TURRET 11KW SPINDLE MOTOR FANUC OTC CONTROL PROGRAMMABLE TAILSTOCK SWARF CONVEYOR 8" POWER CHUCK TOOL SETTER COOLANT
Vendedor: Syndicate Machines Pvt. Ltd.
Año de construcción: usado
Precio: 2.500 €
Ubicación: Land-automatic transfer switch - ats panel - ati panel, 800 ampere - applicable for generators up to 550 kva; gross weight [kg]: 165 AUTOMATIC TRANSFER SWITCH - ATS PANEL - ATI PANEL, 800 AMPERE - APPLICABLE FOR GENERATORS UP TO 550 KVA; GROSS WEIGHT [KG]: 165
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-colchester
machine name  turning center
manufacturer  colchester
model  combi 3000
location transit
year of manufacturing  na
technical specification:	
control = fanuc 210i t
swing over bed = 460mm
swing over cross slide = 270mm		
distance between centers = 1000mm
spindle speeds = 25-2000 rpm
spindle bore = 77mm
machine with = 8 station indexing turret
300mm chuck
tailstock
 COLCHESTER MACHINE NAME TURNING CENTER MANUFACTURER COLCHESTER MODEL COMBI 3000 LOCATION TRANSIT YEAR OF MANUFACTURING NA TECHNICAL SPECIFICATION: CONTROL = FANUC 210I T SWING OVER BED = 460MM SWING OVER CROSS SLIDE = 270MM DISTANCE BETWEEN CENTERS = 1000MM SPINDLE SPEEDS = 25-2000 RPM SPINDLE BORE = 77MM MACHINE WITH = 8 STATION INDEXING TURRET 300MM CHUCK TAILSTOCK
Vendedor: Syndicate Machines Pvt. Ltd.
Año de construcción: usado
Precio: 945 €
Ubicación: Land-automatic transfer switch - ats panel - ati panel, 45 ampere - applicable for generators up to 27 kva; gross weight [kg]: 35 AUTOMATIC TRANSFER SWITCH - ATS PANEL - ATI PANEL, 45 AMPERE - APPLICABLE FOR GENERATORS UP TO 27 KVA; GROSS WEIGHT [KG]: 35
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-technical data:

work area: 2,500 x 1,250 x 115 mm
control: siemens sinumerik 840 d
laser power: 3,200 watts
maximum sheet thickness mild steel: 20 mm
maximum sheet thickness stainless steel: 12 mm
maximum sheet thickness aluminium: 8 mm standard equipment:

-closed machine frame with integrated laser unit
-automatic pallet changer
-tft color display
-position laser diode
-spraying device
-motion unit for high-precision machining
-additional highly dynamic axis yp
-drives with maintenance-free ac servo motors
-closed beam delivery
-conveyor for small parts and waste
-nitroline
-flyline
-infeed end detection

trumpf laser:

-co2 laser truflow 4000
-high-frequency excitation
-maintenance-friendly turbo centrifugal blower
-gas mixer (integrated)
-laser power control
-logbook function laser

cutting head:

-laserschneidopf with 5 "lens
-laserschneidopf with 7.5 "lens
-universal quick exchange device
-controlline

control:

-control siemens sinumerik 840 d
-automatic switch-off
-contourline
-sprintline
-teleservice
-microweld
-rj45 network connector
-3.5 "floppy disk drive
-network connection via tele-diagnosis

security:

-ce marking
-light barrier
-multi-chamber exhaust system
-compact collector
-shop floor programming

(errors and omissions in the technical data, information and prices and subject to prior sale!) 
 TECHNICAL DATA: WORK AREA: 2,500 X 1,250 X 115 MM CONTROL: SIEMENS SINUMERIK 840 D LASER POWER: 3,200 WATTS MAXIMUM SHEET THICKNESS MILD STEEL: 20 MM MAXIMUM SHEET THICKNESS STAINLESS STEEL: 12 MM MAXIMUM SHEET THICKNESS ALUMINIUM: 8 MM STANDARD EQUIPMENT: -CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT -AUTOMATIC PALLET CHANGER -TFT COLOR DISPLAY -POSITION LASER DIODE -SPRAYING DEVICE -MOTION UNIT FOR HIGH-PRECISION MACHINING -ADDITIONAL HIGHLY DYNAMIC AXIS YP -DRIVES WITH MAINTENANCE-FREE AC SERVO MOTORS -CLOSED BEAM DELIVERY -CONVEYOR FOR SMALL PARTS AND WASTE -NITROLINE -FLYLINE -INFEED END DETECTION TRUMPF LASER: -CO2 LASER TRUFLOW 4000 -HIGH-FREQUENCY EXCITATION -MAINTENANCE-FRIENDLY TURBO CENTRIFUGAL BLOWER -GAS MIXER (INTEGRATED) -LASER POWER CONTROL -LOGBOOK FUNCTION LASER CUTTING HEAD: -LASERSCHNEIDOPF WITH 5 "LENS -LASERSCHNEIDOPF WITH 7.5 "LENS -UNIVERSAL QUICK EXCHANGE DEVICE -CONTROLLINE CONTROL: -CONTROL SIEMENS SINUMERIK 840 D -AUTOMATIC SWITCH-OFF -CONTOURLINE -SPRINTLINE -TELESERVICE -MICROWELD -RJ45 NETWORK CONNECTOR -3.5 "FLOPPY DISK DRIVE -NETWORK CONNECTION VIA TELE-DIAGNOSIS SECURITY: -CE MARKING -LIGHT BARRIER -MULTI-CHAMBER EXHAUST SYSTEM -COMPACT COLLECTOR -SHOP FLOOR PROGRAMMING (ERRORS AND OMISSIONS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: imc solutions GmbH
Año de construcción: usado
Precio: 2.300 €
Ubicación: Land-automatic transfer switch - ats panel - ati panel, 1250 ampere - applicable for generators up to 435 kva; gross weight [kg]: 150 AUTOMATIC TRANSFER SWITCH - ATS PANEL - ATI PANEL, 1250 AMPERE - APPLICABLE FOR GENERATORS UP TO 435 KVA; GROSS WEIGHT [KG]: 150
Vendedor: DPX Power BV
Año de construcción: usado
Precio: 3.900 €
Ubicación: Land-pneumatic dovetail cutter / nutfrã¤smaschine hoffmann type pu 2 vh, milling group for a keyway per working cycle vertically or horizontally, foot switch, engine: 1.7 kw, year 2004, passage height: 250 mm, depth vertical / horizontal: 180 mm / 250 mm, incl. roller conveyor. PNEUMATIC DOVETAIL CUTTER / NUTFR&ATILDE;&CURREN;SMASCHINE HOFFMANN TYPE PU 2 VH, MILLING GROUP FOR A KEYWAY PER WORKING CYCLE VERTICALLY OR HORIZONTALLY, FOOT SWITCH, ENGINE: 1.7 KW, YEAR 2004, PASSAGE HEIGHT: 250 MM, DEPTH VERTICAL / HORIZONTAL: 180 MM / 250 MM, INCL. ROLLER CONVEYOR.
Vendedor: OCHMANN Holzbearbeitungsmaschinen
Año de construcción: usado
Precio: 1.600 €
Ubicación: Land-automatic transfer switch - ats panel - ati panel, 250 ampere - applicable for generators up to 175 kva; gross weight [kg]: 60 AUTOMATIC TRANSFER SWITCH - ATS PANEL - ATI PANEL, 250 AMPERE - APPLICABLE FOR GENERATORS UP TO 175 KVA; GROSS WEIGHT [KG]: 60
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-cincinnati
machine name: tool n cutting grinding machine
manufacturer: cincinnati
model: monoset
location: mumbai
year of manufacturing: na
technical specification: 
swing over main slide 12 CINCINNATI MACHINE NAME: TOOL N CUTTING GRINDING MACHINE MANUFACTURER: CINCINNATI MODEL: MONOSET LOCATION: MUMBAI YEAR OF MANUFACTURING: NA TECHNICAL SPECIFICATION: SWING OVER MAIN SLIDE 12" DISTANCE SPINDLE NOSE TO TAIL CENTER 6" MAXIMUM WHEEL DIAMETER 3-1/2" MIN. & MAX. WORK COLLET 1/8" TO 1-1/4" LONGITUDINAL MAIN SLIDE TRAVEL 5-1/4" OFFSET SLIDE MOVEMENT 2-1/4"
Vendedor: Syndicate Machines Pvt. Ltd.
Año de construcción: usado
Precio: 2.000 €
Ubicación: Land-automatic transfer switch - ats panel - ati panel, 400 ampere - applicable for generators up to 275 kva; gross weight [kg]: 80 AUTOMATIC TRANSFER SWITCH - ATS PANEL - ATI PANEL, 400 AMPERE - APPLICABLE FOR GENERATORS UP TO 275 KVA; GROSS WEIGHT [KG]: 80
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-tos
machine name  lathe machine
manufacturer  tos
model sui 63
location  mumbai
year of manufacturing na
technical specification 
length between centers	2000mm
swing over bed 630mm 
swing over carriage 300mm
  TOS MACHINE NAME LATHE MACHINE MANUFACTURER TOS MODEL SUI 63 LOCATION MUMBAI YEAR OF MANUFACTURING NA TECHNICAL SPECIFICATION LENGTH BETWEEN CENTERS 2000MM SWING OVER BED 630MM SWING OVER CARRIAGE 300MM
Vendedor: Syndicate Machines Pvt. Ltd.
Año de construcción: usado
Precio: 6.800 €
Ubicación: Land-automatic transfer switch - ats panel - ati panel, 2.000 ampere - applicable for generators up to 1.380 kva; gross weight [kg]: 525 AUTOMATIC TRANSFER SWITCH - ATS PANEL - ATI PANEL, 2.000 AMPERE - APPLICABLE FOR GENERATORS UP TO 1.380 KVA; GROSS WEIGHT [KG]: 525
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-sculfort
machine name  lathe machine
manufacturer  sculfort
model  supercap
location  mumbai
year of manufacturing na
technical specification 
admit between center 4500mm 
swing over bed; 940mm
 SCULFORT MACHINE NAME LATHE MACHINE MANUFACTURER SCULFORT MODEL SUPERCAP LOCATION MUMBAI YEAR OF MANUFACTURING NA TECHNICAL SPECIFICATION ADMIT BETWEEN CENTER 4500MM SWING OVER BED; 940MM
Vendedor: Syndicate Machines Pvt. Ltd.
Año de construcción: usado
Precio: 1.500 €
Ubicación: Land-automatic transfer switch - ats panel - ati panel, 160 ampere - applicable for generators up to 110 kva; gross weight [kg]: 75 AUTOMATIC TRANSFER SWITCH - ATS PANEL - ATI PANEL, 160 AMPERE - APPLICABLE FOR GENERATORS UP TO 110 KVA; GROSS WEIGHT [KG]: 75
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-poreba
machine name  lathe machine
manufacturer  poreba
model na
location  mumbai
year of manufacturing na
technical specification 
admit between center 4000mm 
swing over bed 900mm POREBA MACHINE NAME LATHE MACHINE MANUFACTURER POREBA MODEL NA LOCATION MUMBAI YEAR OF MANUFACTURING NA TECHNICAL SPECIFICATION ADMIT BETWEEN CENTER 4000MM SWING OVER BED 900MM
Vendedor: Syndicate Machines Pvt. Ltd.
Año de construcción: usado
Precio: 3.800 €
Ubicación: Land-automatic transfer switch - ats panel - ati panel, 1250 ampere - applicable for generators up to 865 kva; gross weight [kg]: 180 AUTOMATIC TRANSFER SWITCH - ATS PANEL - ATI PANEL, 1250 AMPERE - APPLICABLE FOR GENERATORS UP TO 865 KVA; GROSS WEIGHT [KG]: 180
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-jupiter
machine name  lathe machine
manufacturer  jupiter
model  830
location  mumbai
year of manufacturing na
technical specification 
admit between center 3000mm 
swing over bed 800mm JUPITER MACHINE NAME LATHE MACHINE MANUFACTURER JUPITER MODEL 830 LOCATION MUMBAI YEAR OF MANUFACTURING NA TECHNICAL SPECIFICATION ADMIT BETWEEN CENTER 3000MM SWING OVER BED 800MM
Vendedor: Syndicate Machines Pvt. Ltd.
Año de construcción: usado
Precio: 1.250 €
Ubicación: Land-automatic transfer switch - ats panel - ati panel, 125 ampere - applicable for generators up to 86 kva; gross weight [kg]: 60 AUTOMATIC TRANSFER SWITCH - ATS PANEL - ATI PANEL, 125 AMPERE - APPLICABLE FOR GENERATORS UP TO 86 KVA; GROSS WEIGHT [KG]: 60
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-colchester
machine name  lathe machine
manufacturer  colchester
model  1600
location  mumbai
year of manufacturing na
technical specification 
admit between centers 1600mm 
swing dia500mm COLCHESTER MACHINE NAME LATHE MACHINE MANUFACTURER COLCHESTER MODEL 1600 LOCATION MUMBAI YEAR OF MANUFACTURING NA TECHNICAL SPECIFICATION ADMIT BETWEEN CENTERS 1600MM SWING DIA500MM
Vendedor: Syndicate Machines Pvt. Ltd.
Año de construcción: usado
Precio: 4.750 €
Ubicación: Land-automatic transfer switch - ats panel - ati panel, 1600 ampere - applicable for generators up to 1107 kva; gross weight [kg]: 350 AUTOMATIC TRANSFER SWITCH - ATS PANEL - ATI PANEL, 1600 AMPERE - APPLICABLE FOR GENERATORS UP TO 1107 KVA; GROSS WEIGHT [KG]: 350
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-spindle moulder with swinging spindle gomad dfdk - 5
manufacturer gomad
model / machine type dfdk - 5
year of production 1997
category of machines. spindle moulder with tilting spindle
location

gorzów wlkp.
conditions of delivery

own collection
cost of delivery

customer cover
start type

to be agreed
description
comments

the milling body houses two spindles in its interior. the spindles made of alloy steel are mounted in bearings in a special version enabling operation at high speeds. each spindle is mounted in a cylindrical housing, which, together with the motor, is moved vertically. a cast-iron table with two rotating discs is attached to the upper part of the body. a cutter guard with guides and sawdust extraction is mounted on each disc, which can be moved and rotated by 360 °. parameter values ??units
spindle revolutions 3000, 4500, 6000, 9000 rpm.
vertical spindle travel 90 mm / min.
spindle spacing 760 mm
spindle seat morse taper no. 5 -
engine 2x4,5 / 5.9 kw
height from the table plane 850 mm
weight 850 kg
special equipment: - -
milling cutters short after 2 sets 25, 30 mm
device for plug-in fn-25 1 set. - -
arm bracket 1 set - -
angle guide 1 set - -
milling mandrel, long 1 set 25 mm
milling mandrel, long 12 sets 30 mm SPINDLE MOULDER WITH SWINGING SPINDLE GOMAD DFDK - 5 MANUFACTURER GOMAD MODEL / MACHINE TYPE DFDK - 5 YEAR OF PRODUCTION 1997 CATEGORY OF MACHINES. SPINDLE MOULDER WITH TILTING SPINDLE LOCATION GORZóW WLKP. CONDITIONS OF DELIVERY OWN COLLECTION COST OF DELIVERY CUSTOMER COVER START TYPE TO BE AGREED DESCRIPTION COMMENTS THE MILLING BODY HOUSES TWO SPINDLES IN ITS INTERIOR. THE SPINDLES MADE OF ALLOY STEEL ARE MOUNTED IN BEARINGS IN A SPECIAL VERSION ENABLING OPERATION AT HIGH SPEEDS. EACH SPINDLE IS MOUNTED IN A CYLINDRICAL HOUSING, WHICH, TOGETHER WITH THE MOTOR, IS MOVED VERTICALLY. A CAST-IRON TABLE WITH TWO ROTATING DISCS IS ATTACHED TO THE UPPER PART OF THE BODY. A CUTTER GUARD WITH GUIDES AND SAWDUST EXTRACTION IS MOUNTED ON EACH DISC, WHICH CAN BE MOVED AND ROTATED BY 360 °. PARAMETER VALUES ??UNITS SPINDLE REVOLUTIONS 3000, 4500, 6000, 9000 RPM. VERTICAL SPINDLE TRAVEL 90 MM / MIN. SPINDLE SPACING 760 MM SPINDLE SEAT MORSE TAPER NO. 5 - ENGINE 2X4,5 / 5.9 KW HEIGHT FROM THE TABLE PLANE 850 MM WEIGHT 850 KG SPECIAL EQUIPMENT: - - MILLING CUTTERS SHORT AFTER 2 SETS 25, 30 MM DEVICE FOR PLUG-IN FN-25 1 SET. - - ARM BRACKET 1 SET - - ANGLE GUIDE 1 SET - - MILLING MANDREL, LONG 1 SET 25 MM MILLING MANDREL, LONG 12 SETS 30 MM
Vendedor: PPHU Lignum Przemysław Kretowicz
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 5750; engine: doosan dp222lbf; accessories: drip pan, switching panel, volt meter, ampere meter, hertz meter, start battery, exhaust system; power type: 4000002 ; GROSS WEIGHT [KG]: 5750; ENGINE: DOOSAN DP222LBF; ACCESSORIES: DRIP PAN, SWITCHING PANEL, VOLT METER, AMPERE METER, HERTZ METER, START BATTERY, EXHAUST SYSTEM; POWER TYPE: 4000002
Vendedor: BREDENOORD
Año de construcción: usado
Ubicación: Land-
ges. kant length: 2000 mm
kantlstg.: 35 to.
total power: 4,5 kw / 400 v
machine weight: approx. 3000 kg

equipment / accessories:

electrically adjustable backgauge
various tools according to photo
security shield
2 hd control panel with emergency - off switch.

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
anyone can test the machine before purchasing in our factory under power.
 GES. KANT LENGTH: 2000 MM KANTLSTG.: 35 TO. TOTAL POWER: 4,5 KW / 400 V MACHINE WEIGHT: APPROX. 3000 KG EQUIPMENT / ACCESSORIES: ELECTRICALLY ADJUSTABLE BACKGAUGE VARIOUS TOOLS ACCORDING TO PHOTO SECURITY SHIELD 2 HD CONTROL PANEL WITH EMERGENCY - OFF SWITCH. ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. ANYONE CAN TEST THE MACHINE BEFORE PURCHASING IN OUR FACTORY UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-make mixaco maschinenbau neuenrade, type cm-2000 d, no 22.856, new 1993, cold mixer container mixer (1x), material stainless steel (304), capacity 1600 ltr, useful capacity 800 ltr, vessel sizes dia. 1500x750mm (brand new oem vessel), with cover (jacketed), outlet dia. 300mm, with motor 90 kw, 380 volt, with switchgear , floorspace 3,2x1,8 m, total height 3,0 m, weight 10.000 kg, extra specifications -- reconditioned --cold mixersplastic machinery > cold mixers what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE MIXACO MASCHINENBAU NEUENRADE, TYPE CM-2000 D, NO 22.856, NEW 1993, COLD MIXER CONTAINER MIXER (1X), MATERIAL STAINLESS STEEL (304), CAPACITY 1600 LTR, USEFUL CAPACITY 800 LTR, VESSEL SIZES DIA. 1500X750MM (BRAND NEW OEM VESSEL), WITH COVER (JACKETED), OUTLET DIA. 300MM, WITH MOTOR 90 KW, 380 VOLT, WITH SWITCHGEAR , FLOORSPACE 3,2X1,8 M, TOTAL HEIGHT 3,0 M, WEIGHT 10.000 KG, EXTRA SPECIFICATIONS -- RECONDITIONED --COLD MIXERSPLASTIC MACHINERY > COLD MIXERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 7.960 €
Ubicación: Land-%%%%%% attention – special offers now available !!! 
%%%%%% so prices are currently reduced by 20% !!!


universal cylindrical grinding machine mso-cincinnati
with internal grinding attachment

manufacturer: mso-cincinnati
type:  r 57
mach.-nr.: m 25956
year of construction: ??? / 03.2019 tüp.
comm.-nr.: 3990000/009
stock-nr.: 1899

+++ special price: old 9.950,- € | now 7.960,- €
+++ all prices are shown without taxes (net price)


the machine is suitable for:

* external grinding
* internal grinding
* surface grinding
* taper grinding
* chamfering
* angled flat grinding

 
technical data

(according to manufacturer)

centre height: 90 mm
swing-Ø: 180 mm
grinding length: 400 mm

grinding wheel

diameter: 350 mm
bore-Ø: 76 mm
largest width of grinding wheel for plunge grinding: 40 mm
largest total width of a grinding wheel set: 80 mm
largest sum of single widths: 40 mm
grinding wheel speed: 1.650 / 2.150 rpm = 30 m/s

grinding head

largest grinding head hub: 209 mm
largest hub by hand wheel: 67 mm
additional hub: 142 mm
autom. interval feed: 0,005 – 0,020 mm
feed by one revolution of hand wheel: 0,5 mm
feed by one hand wheel graduation mark: 0,005 mm
setting by tip-switch regarding diameter: 0,005 mm

internal grinding attachment

largest distance from front edge spindle headstock to grinding spidnle carrier: 620 mm
bore for carrying the spindle: 60 mm
largest grindable bore: 125 mm / maybe larger

headstock spindle

6 work-piece speeds, adjustable: 80 – 800 rpm
rotatability of headstock spindle against the grinding wheel: 90° / opposite side °45
spindle cone or inner taper of headstock spindle: mk 3

tailstock

inner cone of quill: mk 3
quill travel: 20 mm

table

largest table incline: 14°
largest cone angle: 28°
table speed: 0,0 – 7,0 m/min
rough travel by hand wheel: 1 revolution 20 mm, 1 graduation mark 0,40 mm
fine travel by hand wheel: 1 revolution 2,5 mm, 1 graduation mark 0,05 mm

total connected load: ca. 5 kw
weight: ca. 1.800 kg
standing area: w 1,70 x d 1,50 x h 1,60 m
color: blue / grey-white / red

 
features

* rotatable internal grinding attachment
* manual or automatic operation
* self-feeding up to 0-limit
* grinding wheel fine adjustment
* automatic feed works as piercing feed, without feed, table-dependant feed
* only right / left and right / only left
* upper table for tamper grinding with fine feed and measuring clock
* bedway is lubricated by re-oil
* tailstock can be activated by mechanical lever
* attachment with measuring clock for table pivoting up to 14°
* headstock spindle pivotable up to 90/45°
* grinding head pivotable up to 360°
* grinding head two speeds
* free-standing liquid cooling system, mobile
* splash guards
* grinding wheel flanges with wheels
* internal grinding spindle with cone attachment and extraction threading
* internal cooling through work spindle on work piece during internal grinding
* adjustable straight and radial matching device with quick-fastening lever
* adjustable dressing device for grinding wheel, at tailstock
* adjustable side and diagonal dressing device with scale, for grinding wheel, with quick-release lever
* open lunette, adjustable
* three-chuck-fastening buffer forkhardt Ø 125 mm, with spindle receiver flange (unused)
* fastening clamp device with spindle recevier, fastening clamp set 32 pieces
* grinding thorns for internal grinding in various sizes
* number of retreiving-hearts in various sizes
* number of internal grinding spindles in various sizes
* number of spreading thorns in various sizes


* if the year of construction has a “tüp.”-date, that means the machine has been electrically and technically inspected by us on that date.
* if the year of construction has a “tüb.”-date, that means the machine has been partially overhauled on that date according to the prior owner.
* if the year of construction is marked “*”, it is the information the prior owner relayed to us or our own estimation. %%%%%% ATTENTION – SPECIAL OFFERS NOW AVAILABLE !!! %%%%%% SO PRICES ARE CURRENTLY REDUCED BY 20% !!! UNIVERSAL CYLINDRICAL GRINDING MACHINE MSO-CINCINNATI WITH INTERNAL GRINDING ATTACHMENT MANUFACTURER: MSO-CINCINNATI TYPE: R 57 MACH.-NR.: M 25956 YEAR OF CONSTRUCTION: ??? / 03.2019 TüP. COMM.-NR.: 3990000/009 STOCK-NR.: 1899 +++ SPECIAL PRICE: OLD 9.950,- € | NOW 7.960,- € +++ ALL PRICES ARE SHOWN WITHOUT TAXES (NET PRICE) THE MACHINE IS SUITABLE FOR: * EXTERNAL GRINDING * INTERNAL GRINDING * SURFACE GRINDING * TAPER GRINDING * CHAMFERING * ANGLED FLAT GRINDING TECHNICAL DATA (ACCORDING TO MANUFACTURER) CENTRE HEIGHT: 90 MM SWING-Ø: 180 MM GRINDING LENGTH: 400 MM GRINDING WHEEL DIAMETER: 350 MM BORE-Ø: 76 MM LARGEST WIDTH OF GRINDING WHEEL FOR PLUNGE GRINDING: 40 MM LARGEST TOTAL WIDTH OF A GRINDING WHEEL SET: 80 MM LARGEST SUM OF SINGLE WIDTHS: 40 MM GRINDING WHEEL SPEED: 1.650 / 2.150 RPM = 30 M/S GRINDING HEAD LARGEST GRINDING HEAD HUB: 209 MM LARGEST HUB BY HAND WHEEL: 67 MM ADDITIONAL HUB: 142 MM AUTOM. INTERVAL FEED: 0,005 – 0,020 MM FEED BY ONE REVOLUTION OF HAND WHEEL: 0,5 MM FEED BY ONE HAND WHEEL GRADUATION MARK: 0,005 MM SETTING BY TIP-SWITCH REGARDING DIAMETER: 0,005 MM INTERNAL GRINDING ATTACHMENT LARGEST DISTANCE FROM FRONT EDGE SPINDLE HEADSTOCK TO GRINDING SPIDNLE CARRIER: 620 MM BORE FOR CARRYING THE SPINDLE: 60 MM LARGEST GRINDABLE BORE: 125 MM / MAYBE LARGER HEADSTOCK SPINDLE 6 WORK-PIECE SPEEDS, ADJUSTABLE: 80 – 800 RPM ROTATABILITY OF HEADSTOCK SPINDLE AGAINST THE GRINDING WHEEL: 90° / OPPOSITE SIDE °45 SPINDLE CONE OR INNER TAPER OF HEADSTOCK SPINDLE: MK 3 TAILSTOCK INNER CONE OF QUILL: MK 3 QUILL TRAVEL: 20 MM TABLE LARGEST TABLE INCLINE: 14° LARGEST CONE ANGLE: 28° TABLE SPEED: 0,0 – 7,0 M/MIN ROUGH TRAVEL BY HAND WHEEL: 1 REVOLUTION 20 MM, 1 GRADUATION MARK 0,40 MM FINE TRAVEL BY HAND WHEEL: 1 REVOLUTION 2,5 MM, 1 GRADUATION MARK 0,05 MM TOTAL CONNECTED LOAD: CA. 5 KW WEIGHT: CA. 1.800 KG STANDING AREA: W 1,70 X D 1,50 X H 1,60 M COLOR: BLUE / GREY-WHITE / RED FEATURES * ROTATABLE INTERNAL GRINDING ATTACHMENT * MANUAL OR AUTOMATIC OPERATION * SELF-FEEDING UP TO 0-LIMIT * GRINDING WHEEL FINE ADJUSTMENT * AUTOMATIC FEED WORKS AS PIERCING FEED, WITHOUT FEED, TABLE-DEPENDANT FEED * ONLY RIGHT / LEFT AND RIGHT / ONLY LEFT * UPPER TABLE FOR TAMPER GRINDING WITH FINE FEED AND MEASURING CLOCK * BEDWAY IS LUBRICATED BY RE-OIL * TAILSTOCK CAN BE ACTIVATED BY MECHANICAL LEVER * ATTACHMENT WITH MEASURING CLOCK FOR TABLE PIVOTING UP TO 14° * HEADSTOCK SPINDLE PIVOTABLE UP TO 90/45° * GRINDING HEAD PIVOTABLE UP TO 360° * GRINDING HEAD TWO SPEEDS * FREE-STANDING LIQUID COOLING SYSTEM, MOBILE * SPLASH GUARDS * GRINDING WHEEL FLANGES WITH WHEELS * INTERNAL GRINDING SPINDLE WITH CONE ATTACHMENT AND EXTRACTION THREADING * INTERNAL COOLING THROUGH WORK SPINDLE ON WORK PIECE DURING INTERNAL GRINDING * ADJUSTABLE STRAIGHT AND RADIAL MATCHING DEVICE WITH QUICK-FASTENING LEVER * ADJUSTABLE DRESSING DEVICE FOR GRINDING WHEEL, AT TAILSTOCK * ADJUSTABLE SIDE AND DIAGONAL DRESSING DEVICE WITH SCALE, FOR GRINDING WHEEL, WITH QUICK-RELEASE LEVER * OPEN LUNETTE, ADJUSTABLE * THREE-CHUCK-FASTENING BUFFER FORKHARDT Ø 125 MM, WITH SPINDLE RECEIVER FLANGE (UNUSED) * FASTENING CLAMP DEVICE WITH SPINDLE RECEVIER, FASTENING CLAMP SET 32 PIECES * GRINDING THORNS FOR INTERNAL GRINDING IN VARIOUS SIZES * NUMBER OF RETREIVING-HEARTS IN VARIOUS SIZES * NUMBER OF INTERNAL GRINDING SPINDLES IN VARIOUS SIZES * NUMBER OF SPREADING THORNS IN VARIOUS SIZES * IF THE YEAR OF CONSTRUCTION HAS A “TüP.”-DATE, THAT MEANS THE MACHINE HAS BEEN ELECTRICALLY AND TECHNICALLY INSPECTED BY US ON THAT DATE. * IF THE YEAR OF CONSTRUCTION HAS A “TüB.”-DATE, THAT MEANS THE MACHINE HAS BEEN PARTIALLY OVERHAULED ON THAT DATE ACCORDING TO THE PRIOR OWNER. * IF THE YEAR OF CONSTRUCTION IS MARKED “*”, IT IS THE INFORMATION THE PRIOR OWNER RELAYED TO US OR OUR OWN ESTIMATION.
Vendedor: ProHa Maschinen
Año de construcción: usado
Ubicación: Land-x-travel: 800 mm<br/>y-travel: 800 mm<br/>z-travel: 800 mm<br/>control: heidenhain mill plus it <br/>table surface area: Ø 900 x 700 mm<br/>milling-head swivable   +/-: +30/-120 °<br/>tool adaptor: hsk 63 <br/>turning speeds: 18.000 u/min<br/>power capacity - milling spindle: 35 kw<br/>: 40 st.<br/>table load: 1,4 t<br/>dimensions (hxwxd): 5,0 x 4,25 x 3,1 m<br/>total power requirement: 70 kva<br/>weight of the machine ca.: 9,0 t<br/>5- axis universal machining centre with swiveling head and round table<br/><br/>- round table Ø 900 x 700 mm<br/>- swiveling head (full axis)<br/>- 3d- probe heidenhain ts 641<br/>- blum laser tool setter<br/>- chip conveyor<br/>- internal coolant with filter<br/>- air blast trought spindle<br/>- mode 4 (manual working with open door)<br/>- ext .elec. hand wheel<br/><br/><br/><br/><br/><br/> X-TRAVEL: 800 MM
Y-TRAVEL: 800 MM
Z-TRAVEL: 800 MM
CONTROL: HEIDENHAIN MILL PLUS IT
TABLE SURFACE AREA: Ø 900 X 700 MM
MILLING-HEAD SWIVABLE +/-: +30/-120 °
TOOL ADAPTOR: HSK 63
TURNING SPEEDS: 18.000 U/MIN
POWER CAPACITY - MILLING SPINDLE: 35 KW
: 40 ST.
TABLE LOAD: 1,4 T
DIMENSIONS (HXWXD): 5,0 X 4,25 X 3,1 M
TOTAL POWER REQUIREMENT: 70 KVA
WEIGHT OF THE MACHINE CA.: 9,0 T
5- AXIS UNIVERSAL MACHINING CENTRE WITH SWIVELING HEAD AND ROUND TABLE

- ROUND TABLE Ø 900 X 700 MM
- SWIVELING HEAD (FULL AXIS)
- 3D- PROBE HEIDENHAIN TS 641
- BLUM LASER TOOL SETTER
- CHIP CONVEYOR
- INTERNAL COOLANT WITH FILTER
- AIR BLAST TROUGHT SPINDLE
- MODE 4 (MANUAL WORKING WITH OPEN DOOR)
- EXT .ELEC. HAND WHEEL





Vendedor: Klaus Rosenboom GmbH
Año de construcción: usado
Ubicación: Land-lightweight steel framed warehouse from 1998 with a covered floor surface area of approximately 864 square meters [36m * 24m * 5.7 / 7.8 m] which is due to be dismantled mid april 2019.

future uses:
as a factory building, craftsmen workshop, warehouse, machine shop and much more.

approximate dimensions:
covered area: 864 square meters; usable area: approx. 843 sq m;
hall length: 36.07 meters outside wall cladding;
longitudinal grid: 6,00 m bay width.
hall width: approx. 24.07 m outside of wall cladding;
endwall grid: 6.00 m distance between end wall posts.
clear hight: 5,00 m to the frame tie/ strap;
eave height: 5.74 m top steel;
apex hight: 7,86 meters top of steel work;
roof pitch: 10 degree symmetrical saddle roof;
snow load: so = 0,75 kn/sqm / 75 kg/m²;
wind load: alex = 0,50 kn/m² pressure;

structural steel work:
bolted frame structure from hot-rolled, hot-dip galvanized euro-profiles of steel grade s 235 jr g2 according to din en 10 027-1 (st 37). it's 5 main frames with uprights ipe 300 and trusses ipe 360 with frame-ties fl 8 x 100 s 355; two end wall frames with corner posts and intermediary posts he-a 140 spaced 6.00 c2c. 

roof covering:
sandwich iso roof panels - ral 9002 - mounted on galvanized cold formed z profile purlins.

wall covering:
horizontal fixed corrugated steel sheets ral 9006 - white aluminium and steel trapezoidal profiles (primed and coated). the wall panel is dented and incomplete because of the adjacent connecting building. 

facilities:
1x sectional door (4000 x 4000 mm) in the side wall.
1x steel doors (1000 x 2000 mm) in the side wall.
1x steel doors (1000 x 2000 mm) in the end wall.
4x smoke and heat vent flaps (1800 x 1200 mm);
various lights with switch gear and fuse box;

documentation: drawings from 1997/ 1998.
hall location: bavaria. availability and viewing by appointment.
availability: to be removed by the end of april.

net price:
upon written request with full company / contact information.    LIGHTWEIGHT STEEL FRAMED WAREHOUSE FROM 1998 WITH A COVERED FLOOR SURFACE AREA OF APPROXIMATELY 864 SQUARE METERS [36M * 24M * 5.7 / 7.8 M] WHICH IS DUE TO BE DISMANTLED MID APRIL 2019. FUTURE USES: AS A FACTORY BUILDING, CRAFTSMEN WORKSHOP, WAREHOUSE, MACHINE SHOP AND MUCH MORE. APPROXIMATE DIMENSIONS: COVERED AREA: 864 SQUARE METERS; USABLE AREA: APPROX. 843 SQ M; HALL LENGTH: 36.07 METERS OUTSIDE WALL CLADDING; LONGITUDINAL GRID: 6,00 M BAY WIDTH. HALL WIDTH: APPROX. 24.07 M OUTSIDE OF WALL CLADDING; ENDWALL GRID: 6.00 M DISTANCE BETWEEN END WALL POSTS. CLEAR HIGHT: 5,00 M TO THE FRAME TIE/ STRAP; EAVE HEIGHT: 5.74 M TOP STEEL; APEX HIGHT: 7,86 METERS TOP OF STEEL WORK; ROOF PITCH: 10 DEGREE SYMMETRICAL SADDLE ROOF; SNOW LOAD: SO = 0,75 KN/SQM / 75 KG/M²; WIND LOAD: ALEX = 0,50 KN/M² PRESSURE; STRUCTURAL STEEL WORK: BOLTED FRAME STRUCTURE FROM HOT-ROLLED, HOT-DIP GALVANIZED EURO-PROFILES OF STEEL GRADE S 235 JR G2 ACCORDING TO DIN EN 10 027-1 (ST 37). IT'S 5 MAIN FRAMES WITH UPRIGHTS IPE 300 AND TRUSSES IPE 360 WITH FRAME-TIES FL 8 X 100 S 355; TWO END WALL FRAMES WITH CORNER POSTS AND INTERMEDIARY POSTS HE-A 140 SPACED 6.00 C2C. ROOF COVERING: SANDWICH ISO ROOF PANELS - RAL 9002 - MOUNTED ON GALVANIZED COLD FORMED Z PROFILE PURLINS. WALL COVERING: HORIZONTAL FIXED CORRUGATED STEEL SHEETS RAL 9006 - WHITE ALUMINIUM AND STEEL TRAPEZOIDAL PROFILES (PRIMED AND COATED). THE WALL PANEL IS DENTED AND INCOMPLETE BECAUSE OF THE ADJACENT CONNECTING BUILDING. FACILITIES: 1X SECTIONAL DOOR (4000 X 4000 MM) IN THE SIDE WALL. 1X STEEL DOORS (1000 X 2000 MM) IN THE SIDE WALL. 1X STEEL DOORS (1000 X 2000 MM) IN THE END WALL. 4X SMOKE AND HEAT VENT FLAPS (1800 X 1200 MM); VARIOUS LIGHTS WITH SWITCH GEAR AND FUSE BOX; DOCUMENTATION: DRAWINGS FROM 1997/ 1998. HALL LOCATION: BAVARIA. AVAILABILITY AND VIEWING BY APPOINTMENT. AVAILABILITY: TO BE REMOVED BY THE END OF APRIL. NET PRICE: UPON WRITTEN REQUEST WITH FULL COMPANY / CONTACT INFORMATION.
Vendedor: THAL BAUSATZHALLEN
Año de construcción: usado
Ubicación: Land-x-travel: 300 mm<br/>y-travel: 150 mm<br/>z-travel: 300 mm<br/>table surface area: 600 x 210 mm<br/>table tiltable and swivelling +/-: 40 grad<br/>milling head -swivable +/-: 40 °<br/>tool taper: mk4 <br/>turning speed range: 60 - 1900 u/min<br/>feeds - longitudinal: 0- 475 mm/min<br/>electrics - voltage/frequency: 380/50 v/hz<br/>total power requirement: 1,90 kw<br/>weight of the machine ca.: 0,70 t<br/>machine comes with tiltable table<br/>device for horizontal milling (no arbor),<br/>several mk4 toolholders, vice. <br/><br/><br/><br/><br/> X-TRAVEL: 300 MM
Y-TRAVEL: 150 MM
Z-TRAVEL: 300 MM
TABLE SURFACE AREA: 600 X 210 MM
TABLE TILTABLE AND SWIVELLING +/-: 40 GRAD
MILLING HEAD -SWIVABLE +/-: 40 °
TOOL TAPER: MK4
TURNING SPEED RANGE: 60 - 1900 U/MIN
FEEDS - LONGITUDINAL: 0- 475 MM/MIN
ELECTRICS - VOLTAGE/FREQUENCY: 380/50 V/HZ
TOTAL POWER REQUIREMENT: 1,90 KW
WEIGHT OF THE MACHINE CA.: 0,70 T
MACHINE COMES WITH TILTABLE TABLE
DEVICE FOR HORIZONTAL MILLING (NO ARBOR),
SEVERAL MK4 TOOLHOLDERS, VICE.




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-ideal csr typ. 201 - 21
wire mesh production line csr 
project jig welding machine
year of manufacture 1996
switch / control cabinet
kva125
made in germany 
control: w/siemens handheld computer control
mounted in enclosed wire cage safety structure 
the coordinate welding machine csr 201 is used for resisting point welding of sheet metal and wire products in stencils:
work-piece dimensions:
length max.1800 mm
width max. 750 mm
nldw7
height max. 200 mm

x-axis for driving the welding unit according to the work piece length, with a base frame, hardened liner guides, serrated toothed rack system and servomotor with incremental encoder, travel max. 1800mm programmable, max. travel speed 1500 mm / s positioning accuracy +/- 0.2mm
y axis
for driving the welding unit according to work piece width, with hardened linear guides, rack system and rotary servo motor with incremental encoder, travel max. 750 mm programmable, max. driving speed 1500mm / s positioning accuracy +/- 0.2mm
c console
for holding the welding cylinder, size 750mm
welding cylinder lower pneumatic cylinder: electrode force 5900n (5bar) stroke 0-50 mm, with mechanical stroke adjustment upper pneumatic cylinder: electrode force 5.900n (5bar), total stroke 210mm
versaweld  IDEAL CSR TYP. 201 - 21 WIRE MESH PRODUCTION LINE CSR PROJECT JIG WELDING MACHINE YEAR OF MANUFACTURE 1996 SWITCH / CONTROL CABINET KVA125 MADE IN GERMANY CONTROL: W/SIEMENS HANDHELD COMPUTER CONTROL MOUNTED IN ENCLOSED WIRE CAGE SAFETY STRUCTURE THE COORDINATE WELDING MACHINE CSR 201 IS USED FOR RESISTING POINT WELDING OF SHEET METAL AND WIRE PRODUCTS IN STENCILS: WORK-PIECE DIMENSIONS: LENGTH MAX.1800 MM WIDTH MAX. 750 MM NLDW7 HEIGHT MAX. 200 MM X-AXIS FOR DRIVING THE WELDING UNIT ACCORDING TO THE WORK PIECE LENGTH, WITH A BASE FRAME, HARDENED LINER GUIDES, SERRATED TOOTHED RACK SYSTEM AND SERVOMOTOR WITH INCREMENTAL ENCODER, TRAVEL MAX. 1800MM PROGRAMMABLE, MAX. TRAVEL SPEED 1500 MM / S POSITIONING ACCURACY +/- 0.2MM Y AXIS FOR DRIVING THE WELDING UNIT ACCORDING TO WORK PIECE WIDTH, WITH HARDENED LINEAR GUIDES, RACK SYSTEM AND ROTARY SERVO MOTOR WITH INCREMENTAL ENCODER, TRAVEL MAX. 750 MM PROGRAMMABLE, MAX. DRIVING SPEED 1500MM / S POSITIONING ACCURACY +/- 0.2MM C CONSOLE FOR HOLDING THE WELDING CYLINDER, SIZE 750MM WELDING CYLINDER LOWER PNEUMATIC CYLINDER: ELECTRODE FORCE 5900N (5BAR) STROKE 0-50 MM, WITH MECHANICAL STROKE ADJUSTMENT UPPER PNEUMATIC CYLINDER: ELECTRODE FORCE 5.900N (5BAR), TOTAL STROKE 210MM VERSAWELD
Vendedor: Silicon plus
Año de construcción: usado
Ubicación: Land-number of milling spindles: 1 st.<br/>fence: ja ja /nein<br/>workpiece: ja <br/>crosscutting milling machine stegherr, type ksf-mini<br/><br/><br/>special milling machine for the efficient production of crossbar joints.<br/><br/>the cross-grain milling machine ksf-mini is the product of great experience of <br/>the company<br/>stegherr in the construction of this special milling machine for cross-rung <br/>joints.<br/><br/>with the ksf-mini all can be found in practice<br/>cross joint connections<br/>be produced quickly and accurately. also already profiled sprouts<br/>can be<br/>on the ksf-mini edit. the precise milling is achieved because the<br/>workpiece in<br/>a clamping is handled on three sides.<br/><br/>the tool drive takes place via two three-phase motors, the tension of<br/>workpieces pneumatic.<br/><br/>the profile cutter is designed for the web width. the saw blades, which are the<br/>flatten out,<br/>are adjustable by intermediate rings to the dimensions of the profile cutter.<br/><br/>the swivel device is free of play.<br/><br/>the machine is designed for a maximum workpiece cross section of 56 x 46<br/>mm.<br/><br/>motor 2.2 kw, 380 v 50 hz<br/><br/>pneumatic pressure 6 bar<br/><br/>included:<br/><br/>- footswitch operation<br/>- table base<br/>- ruler<br/>- 2 saw blades<br/>- 1 profile cutter<br/><br/>(technical data according to the manufacturer, without guarantee!)<br/><br/><br/><br/><br/> NUMBER OF MILLING SPINDLES: 1 ST.
FENCE: JA JA /NEIN
WORKPIECE: JA
CROSSCUTTING MILLING MACHINE STEGHERR, TYPE KSF-MINI


SPECIAL MILLING MACHINE FOR THE EFFICIENT PRODUCTION OF CROSSBAR JOINTS.

THE CROSS-GRAIN MILLING MACHINE KSF-MINI IS THE PRODUCT OF GREAT EXPERIENCE OF
THE COMPANY
STEGHERR IN THE CONSTRUCTION OF THIS SPECIAL MILLING MACHINE FOR CROSS-RUNG
JOINTS.

WITH THE KSF-MINI ALL CAN BE FOUND IN PRACTICE
CROSS JOINT CONNECTIONS
BE PRODUCED QUICKLY AND ACCURATELY. ALSO ALREADY PROFILED SPROUTS
CAN BE
ON THE KSF-MINI EDIT. THE PRECISE MILLING IS ACHIEVED BECAUSE THE
WORKPIECE IN
A CLAMPING IS HANDLED ON THREE SIDES.

THE TOOL DRIVE TAKES PLACE VIA TWO THREE-PHASE MOTORS, THE TENSION OF
WORKPIECES PNEUMATIC.

THE PROFILE CUTTER IS DESIGNED FOR THE WEB WIDTH. THE SAW BLADES, WHICH ARE THE
FLATTEN OUT,
ARE ADJUSTABLE BY INTERMEDIATE RINGS TO THE DIMENSIONS OF THE PROFILE CUTTER.

THE SWIVEL DEVICE IS FREE OF PLAY.

THE MACHINE IS DESIGNED FOR A MAXIMUM WORKPIECE CROSS SECTION OF 56 X 46
MM.

MOTOR 2.2 KW, 380 V 50 HZ

PNEUMATIC PRESSURE 6 BAR

INCLUDED:

- FOOTSWITCH OPERATION
- TABLE BASE
- RULER
- 2 SAW BLADES
- 1 PROFILE CUTTER

(TECHNICAL DATA ACCORDING TO THE MANUFACTURER, WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-spot & projection welding machine
posiweld by schlatter 
model: orion megaflex 3
with nc controlled x and y axes
+ machine positioning system y
+ rotary indexing table with 2 positions
+ siemens control cabinet
made in switzerland
year 2002
ce norm
power rating max.214kwa
working pressure 5.5bar
belh2f0rgq
axes:
x-1600mm
y-700mm
z1-250mm
z2-120mm
c1-c2 from 0-180°
all axes are driven by ac servomotors
machines are now located in winterlingen/germany
it is from running production.
on stock also 2 ideal mesh welders:
ideal csr 201 project welding machine year 1996
ideal mesh welder pgs 140-12 year 1995  SPOT & PROJECTION WELDING MACHINE POSIWELD BY SCHLATTER MODEL: ORION MEGAFLEX 3 WITH NC CONTROLLED X AND Y AXES + MACHINE POSITIONING SYSTEM Y + ROTARY INDEXING TABLE WITH 2 POSITIONS + SIEMENS CONTROL CABINET MADE IN SWITZERLAND YEAR 2002 CE NORM POWER RATING MAX.214KWA WORKING PRESSURE 5.5BAR BELH2F0RGQ AXES: X-1600MM Y-700MM Z1-250MM Z2-120MM C1-C2 FROM 0-180° ALL AXES ARE DRIVEN BY AC SERVOMOTORS MACHINES ARE NOW LOCATED IN WINTERLINGEN/GERMANY IT IS FROM RUNNING PRODUCTION. ON STOCK ALSO 2 IDEAL MESH WELDERS: IDEAL CSR 201 PROJECT WELDING MACHINE YEAR 1996 IDEAL MESH WELDER PGS 140-12 YEAR 1995
Vendedor: Silicon plus
Año de construcción: usado
Precio: 14.000 €
Ubicación: Land-tenoning spindle: 1 st.<br/>number of milling agregates: 4 st.<br/>spindle diameter: 60/50 mm<br/>control: ja <br/>!! machine is still in use !!<br/><br/>window system gubisch est-h 2000<br/><br/><br/>ablängsäge<br/>----------------<br/>engine 3 kw<br/>speed: 3,000 rpm<br/>saw blade diameter: 400 mm<br/>flange diameter: 80 mm<br/>adjustment: horizontal: manual after mechanical display<br/>adjustment range: 0 - 120 mm<br/><br/>length stop<br/>----------------------<br/>length 3,250 mm, by hand<br/><br/>slot spindle<br/>-------------------<br/>engine 9.2 kw<br/>spindle speed: 4,500 rpm<br/>spindle diameter: 50 mm<br/>spindle length: 300 mm<br/>spindle stroke vertical: 3 x 100 mm for iv 68 - iv 92<br/>tool diameter: max. 400 / min 240 mm<br/>adjustment: horizontal u. vertically in the u-hub<br/>adjustment range: vertical 210 mm under table<br/>number of tools: 3 tool sets a 100 mm<br/><br/>shortest workpieces: 320 mm + spigot<br/><br/><br/>clamping table<br/>----------------------<br/><br/>on ball guide bushes and roller guides<br/><br/>swivel range: yes, 60 degrees in both directions<br/>speeds: 0-28 m / min. infinitely variable, 4 speed ranges<br/>type of counter-timber: counter-disc for 6 tool contour contours, the<br/>be automatically controlled for the intended tool sets.<br/>handover: automatically<br/>mode of operation: individual production, frame-by-frame production and mass <br/>production possible<br/><br/>longitudinal profiling<br/>----------------------<br/><br/>1. profile spindle with synchronous dipping automatic<br/>--------------------<br/>engine 9.2 kw<br/>spindle speed 6,000 rpm<br/>spindle diameter: 50 mm<br/>spindle length: 200 mm<br/>equal and counter run for tear-free refolding<br/>spindle stroke vertical: 2 x 100 mm for iv 68 - iv 92<br/>circle diameter: 100 - 240 mm<br/><br/>2. profile spindle<br/>--------------------<br/>engine 9.2 kw<br/>spindle speed 6,000 rpm<br/>spindle diameter: 50 mm<br/>spindle length: 200 mm<br/>spindle stroke vertical: 2 x 100 mm for iv 68 - iv 92<br/>circle diameter: 100 - 240 mm<br/><br/>3. profile spindle<br/>--------------------<br/>engine 9.2 kw<br/>spindle speed 6,000 rpm<br/>spindle diameter: 50 mm<br/>spindle length: 200 mm<br/>spindle stroke vertical: 2 x 100 mm for iv 68 - iv 92<br/>circle diameter: 240 mm<br/><br/>4. spindle glass bead sawing unit, horizontally above<br/>-------------------------------------------------- --------------------<br/>engine 3 kw<br/>revolutions: 3000 rpm<br/>adjustment: horizontal high-low<br/>circle diameter: 250 mm<br/>clamping flange holder: 60 mm diameter<br/>pneumatic glazing bead strip with non-return valve<br/><br/>other features<br/>-------------------------<br/>umfälzeinrichtung<br/>lubricant pump man.<br/>outfeed roller<br/>support rail, swing-out as frame support, from 500 mm to 1000 mm<br/>to fold over<br/><br/>12 inch screen control<br/><br/>option:<br/>********<br/>used window tools oppold iv 68/78 wood 13er achsmaß<br/>bore: 60/50<br/>140 drainage edge<br/>slot: zero 322<br/><br/><br/>(technical data according to manufacturer - without guarantee!)<br/><br/><br/><br/><br/> TENONING SPINDLE: 1 ST.
NUMBER OF MILLING AGREGATES: 4 ST.
SPINDLE DIAMETER: 60/50 MM
CONTROL: JA
!! MACHINE IS STILL IN USE !!

WINDOW SYSTEM GUBISCH EST-H 2000


ABLäNGSäGE
----------------
ENGINE 3 KW
SPEED: 3,000 RPM
SAW BLADE DIAMETER: 400 MM
FLANGE DIAMETER: 80 MM
ADJUSTMENT: HORIZONTAL: MANUAL AFTER MECHANICAL DISPLAY
ADJUSTMENT RANGE: 0 - 120 MM

LENGTH STOP
----------------------
LENGTH 3,250 MM, BY HAND

SLOT SPINDLE
-------------------
ENGINE 9.2 KW
SPINDLE SPEED: 4,500 RPM
SPINDLE DIAMETER: 50 MM
SPINDLE LENGTH: 300 MM
SPINDLE STROKE VERTICAL: 3 X 100 MM FOR IV 68 - IV 92
TOOL DIAMETER: MAX. 400 / MIN 240 MM
ADJUSTMENT: HORIZONTAL U. VERTICALLY IN THE U-HUB
ADJUSTMENT RANGE: VERTICAL 210 MM UNDER TABLE
NUMBER OF TOOLS: 3 TOOL SETS A 100 MM

SHORTEST WORKPIECES: 320 MM + SPIGOT


CLAMPING TABLE
----------------------

ON BALL GUIDE BUSHES AND ROLLER GUIDES

SWIVEL RANGE: YES, 60 DEGREES IN BOTH DIRECTIONS
SPEEDS: 0-28 M / MIN. INFINITELY VARIABLE, 4 SPEED RANGES
TYPE OF COUNTER-TIMBER: COUNTER-DISC FOR 6 TOOL CONTOUR CONTOURS, THE
BE AUTOMATICALLY CONTROLLED FOR THE INTENDED TOOL SETS.
HANDOVER: AUTOMATICALLY
MODE OF OPERATION: INDIVIDUAL PRODUCTION, FRAME-BY-FRAME PRODUCTION AND MASS
PRODUCTION POSSIBLE

LONGITUDINAL PROFILING
----------------------

1. PROFILE SPINDLE WITH SYNCHRONOUS DIPPING AUTOMATIC
--------------------
ENGINE 9.2 KW
SPINDLE SPEED 6,000 RPM
SPINDLE DIAMETER: 50 MM
SPINDLE LENGTH: 200 MM
EQUAL AND COUNTER RUN FOR TEAR-FREE REFOLDING
SPINDLE STROKE VERTICAL: 2 X 100 MM FOR IV 68 - IV 92
CIRCLE DIAMETER: 100 - 240 MM

2. PROFILE SPINDLE
--------------------
ENGINE 9.2 KW
SPINDLE SPEED 6,000 RPM
SPINDLE DIAMETER: 50 MM
SPINDLE LENGTH: 200 MM
SPINDLE STROKE VERTICAL: 2 X 100 MM FOR IV 68 - IV 92
CIRCLE DIAMETER: 100 - 240 MM

3. PROFILE SPINDLE
--------------------
ENGINE 9.2 KW
SPINDLE SPEED 6,000 RPM
SPINDLE DIAMETER: 50 MM
SPINDLE LENGTH: 200 MM
SPINDLE STROKE VERTICAL: 2 X 100 MM FOR IV 68 - IV 92
CIRCLE DIAMETER: 240 MM

4. SPINDLE GLASS BEAD SAWING UNIT, HORIZONTALLY ABOVE
-------------------------------------------------- --------------------
ENGINE 3 KW
REVOLUTIONS: 3000 RPM
ADJUSTMENT: HORIZONTAL HIGH-LOW
CIRCLE DIAMETER: 250 MM
CLAMPING FLANGE HOLDER: 60 MM DIAMETER
PNEUMATIC GLAZING BEAD STRIP WITH NON-RETURN VALVE

OTHER FEATURES
-------------------------
UMFäLZEINRICHTUNG
LUBRICANT PUMP MAN.
OUTFEED ROLLER
SUPPORT RAIL, SWING-OUT AS FRAME SUPPORT, FROM 500 MM TO 1000 MM
TO FOLD OVER

12 INCH SCREEN CONTROL

OPTION:
********
USED WINDOW TOOLS OPPOLD IV 68/78 WOOD 13ER ACHSMAß
BORE: 60/50
140 DRAINAGE EDGE
SLOT: ZERO 322


(TECHNICAL DATA ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-
brush sanding machine / edge grinding machine lã?wer topspin k

2002, very good condition
edge finish machine with an air cushion table.
for the edging. ideally suited for the finish - and intermediate lacquer sanding
brush diameter 220 mm, clamping height 160 mm
brush approx. 200 mm, fore aft approximately 200 mm, adjustable in height 45â°-90 â° swivel
roller speed infinitely variable, with frequency converter 150-1400 rpm
air cushion table with side channel blowers for work and prevent scratches.
table length 4100 mm, width 700 mm
chassis with castors
sanding drum can be fitted by the operator. the sanding paper pad are inserted individually. new system with wider bristle support.
grinding motor 0.75 kw
2 x home pressure compressor for the air cushion table per 0.95 kw miscellaneous new and used abrasive material to the insertion of the brush.

transport dimensions 4100 x 900 x 1000 mm, 250 kg

heavy equipment and machinery and equipment, without warranty.
technical data, year of manufacture and condition no warranty! bought as seen!
subject to prior sale

delivery: in stock our general terms and conditions apply

BRUSH SANDING MACHINE / EDGE GRINDING MACHINE L&ATILDE;?WER TOPSPIN K 2002, VERY GOOD CONDITION EDGE FINISH MACHINE WITH AN AIR CUSHION TABLE. FOR THE EDGING. IDEALLY SUITED FOR THE FINISH - AND INTERMEDIATE LACQUER SANDING BRUSH DIAMETER 220 MM, CLAMPING HEIGHT 160 MM BRUSH APPROX. 200 MM, FORE AFT APPROXIMATELY 200 MM, ADJUSTABLE IN HEIGHT 45&ACIRC;&DEG;-90 &ACIRC;&DEG; SWIVEL ROLLER SPEED INFINITELY VARIABLE, WITH FREQUENCY CONVERTER 150-1400 RPM AIR CUSHION TABLE WITH SIDE CHANNEL BLOWERS FOR WORK AND PREVENT SCRATCHES. TABLE LENGTH 4100 MM, WIDTH 700 MM CHASSIS WITH CASTORS SANDING DRUM CAN BE FITTED BY THE OPERATOR. THE SANDING PAPER PAD ARE INSERTED INDIVIDUALLY. NEW SYSTEM WITH WIDER BRISTLE SUPPORT. GRINDING MOTOR 0.75 KW 2 X HOME PRESSURE COMPRESSOR FOR THE AIR CUSHION TABLE PER 0.95 KW MISCELLANEOUS NEW AND USED ABRASIVE MATERIAL TO THE INSERTION OF THE BRUSH. TRANSPORT DIMENSIONS 4100 X 900 X 1000 MM, 250 KG HEAVY EQUIPMENT AND MACHINERY AND EQUIPMENT, WITHOUT WARRANTY. TECHNICAL DATA, YEAR OF MANUFACTURE AND CONDITION NO WARRANTY! BOUGHT AS SEEN! SUBJECT TO PRIOR SALE DELIVERY: IN STOCK OUR GENERAL TERMS AND CONDITIONS APPLY
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Precio: 6.800 €
Ubicación: Land-bore diameter: 8 mm<br/>number of heads horizontal: 5 st.<br/>number of heads vertical: 3 st.<br/>control: ja <br/>! machine is still in use and can be visited!<br/><br/>to sell on behalf of the customer!<br/><br/>1 stegherr drilling center type bz<br/>**************************************<br/>the machine has 3 aggregate slides, of which aggregate slides<br/>1 fixed and unit slides 2 and 3 via the control to preset values<br/>be positioned.<br/><br/>unit carriage 1 (fixed) equipped with:<br/>-------------------------------------------------- -<br/><br/>a) 1 drilling unit for drilling the front side of the workpieces with<br/>  triple drill head, drilling distance: 28/41 mm<br/>- drilling spindles individually retrievable<br/>- drilling stroke: max. 80 mm<br/>- speed ??of the drilling spindles: approx. 4000 rpm<br/>- engine power: approx. 1.1 kw<br/>- chip extraction: diameter 160 mm<br/>- suction hose upwards<br/><br/>b) 1 stainless steel high pressure glue nozzle<br/>- legemount adjustable via program<br/>- glue monitoring via program<br/><br/>c) 1 dowel driving head for dowel diameter 8 mm, dowel length 60 mm<br/>- feeding and separation of the dowels via vibratory conveyors<br/>  3 dowels, arranged like drill head, driving in max. 3 dowels<br/>  in one operation<br/>- workpiece stop, lowered via pneumatic cylinder, around the workpiece<br/>  to strike exactly<br/><br/>d) 1 top bandbohraggregat arranged from above, with triple drill head<br/>  for roto pot bore<br/>- drilling stroke: max. 80 mm<br/>- engine power: approx. 1.1 kw<br/>- speed: about 4500 rpm<br/><br/>e) 1 carriage with controlled axis (x)<br/>  for moving the drilling, glueing and dividing unit to the programmed<br/>  drilling positions<br/>- swivel axis, swivel range 90 °<br/>  for converting the drilling unit from end to longitudinal operation<br/>  here, the entire axis (x) is also swiveled around this axis<br/>  to be used for longitudinal operation<br/><br/>aggregate carriage 2<br/><br/>the entire unit can be positioned in the x-axis via a servomotor and<br/>can thus reach any position on the workpiece and there the programmed<br/>doing work.<br/><br/>the aggregate carriage is equipped with:<br/><br/>a) drilling unit with 3 individually retrievable spindles for drilling the<br/>  fighter, rung and post drilling patterns on the long side of the workpiece<br/>  or the dowel holes on the workpiece ends.<br/>- drilling distance: 28/41 mm<br/>- drilling stroke for each spindle: max. 80 mm<br/>- speed: about 4000 rpm<br/>- engine power: approx. 1.1 kw<br/><br/>b) drilling unit for lock plate hole, equipped with:<br/><br/>- simple boring head<br/>- fixed in height - distance from workpiece support: 51 mm<br/>- drill diameter: 2.5 mm<br/>- drilling stroke: max. 80 mm<br/>- speed: about 4500 rpm<br/>- engine power: approx. 1.1 kw<br/><br/>c) drilling unit for mounting holes:<br/><br/>- drilling stroke: max. 80 mm<br/>- speed: about 4500 rpm<br/>- engine power: approx. 1.1 kw<br/>- mechanically fixed in height - distance from workpiece support: 31 mm<br/><br/>d) workpiece support table<br/>  with pneumatic workpiece clamping device and mounted topfandbohraggregat<br/>- can be disconnected voom unit carriage (pneumatic) and the<br/>  aggregate slides can each over this point left or right<br/>  bohraufgabenausführen. this is horizontal from each one<br/>  arranged aggregate possible until the end of the workpiece<br/><br/>e) topfandbohraggregat arranged from above with triple drill head<br/>  for roto pot bore<br/>- drilling stroke: max. 80 mm<br/>- engine power: approx. 1.1 kw<br/>- speed: about 4500 rpm<br/><br/>aggregate carriage 3<br/><br/>servo axis in x direction, this turns on program on the<br/>workpiece length.<br/><br/>a) 1 drilling unit for drilling the front side of the wersktücke with triple <br/>drill head<br/>- drilling distance: 28/41 mm<br/>- drilling spindles individually retrievable<br/>- drilling stroke: max. 80 mm<br/>- drehzhal the drill spindles: about 4000 u / min<br/>- engine power: approx. 1.1 kw<br/>- chip extraction: diameter 160 mm<br/>- suction hose upwards<br/><br/>b) 1 stainless steel high pressure glue nozzle<br/>- legemount adjustable via program<br/>- glue monitoring via program<br/><br/>c) 1 dowel driving head for dowel diameter 8 mm, dowel length 60 mm<br/>- feeding and separation of the dowels via vibratory conveyors<br/>- 3 dowels, arranged like drill head, driving max. 3 dowels<br/>  in one operation<br/>- workpiece stop, lowered via pneumatic cylinder, around the workpiece<br/>  to strike exactly<br/><br/>d) 1 topfbandbohraggregat arranged from above<br/>  with triple drill head for roto pot bore<br/>- drilling stroke: max. 80 mm<br/>- engine power: approx. 1.1 kw<br/>- speed: about 4500 rpm<br/><br/>e) 1 carriage with controlled axis (x)<br/>  for moving the drilling, glue and dowel unit to the programmed<br/>  drilling positions<br/>- swivel axis, swivel range 90 °, for converting the drilling unit of<br/>  forehead-on longitudinal operation.<br/>  here, the entire axis (x) is also swiveled around this axis<br/>  to be used for longitudinal operation<br/><br/>the entire unit can be positioned in the x-axis via a servomotor and<br/>can thus reach any position on the workpiece and there the programmed<br/>doing work.<br/><br/>workpiece length scanning, so that the end holes are at the exact distance from<br/>external dimensions can be set.<br/>drilling unit automatically corrects any length deviations on the workpiece<br/>within a certain tolerance range.<br/><br/>for workpieces longer than 3 m, this workpiece must be in two working lengths<br/>be processed.<br/><br/>technical specifications:<br/><br/>- max. workpiece length: 3000 mm<br/>- min. workpiece length: 320 mm<br/>- workpiece thickness: 40-80 mm<br/>- workpiece clamping: pneumatic<br/>- workpiece loading or unloading: manually<br/>- all travel paths run on high-precision linear guides<br/>- 4 electronically program controlled axes (ball screw operation<br/>  or rack)<br/>- high-pressure glue system in stainless steel<br/>- glue monitoring via program<br/>- leichenge adjustable via control<br/>- 1 dowel vibration conveyor (large version) for anchor diameter 8 mm,<br/>  dowel length 60 mm<br/>- six-track dowel separation and feed (3x for right, 3x for left)<br/><br/>machine power is about 4 parts per minute. this is an average,<br/>which in individual cases may vary slightly upwards or downwards.<br/><br/>control of the machine<br/><br/>- pc / plc control based on windows<br/>- pc in industrial design with floppy disk drive, keyboard and<br/>  15farbbild flat monitor<br/>- user friendly machine program<br/>- high storage capacity<br/>- graphic blocks for visualization of the programmed drilling patterns<br/>program with error indication, i. errors that occur in the program flow<br/>  can be displayed on the screen and can thereby<br/>  be localized faster and corrected.<br/><br/>- extraction: 3 x diameter 160 upwards<br/>- extraction speed: approx. 25 m / s<br/><br/>the machine is online-enabled<br/><br/><br/>(techn. data according to manufacturer - without guarantee!)<br/><br/><br/><br/><br/> BORE DIAMETER: 8 MM
NUMBER OF HEADS HORIZONTAL: 5 ST.
NUMBER OF HEADS VERTICAL: 3 ST.
CONTROL: JA
! MACHINE IS STILL IN USE AND CAN BE VISITED!

TO SELL ON BEHALF OF THE CUSTOMER!

1 STEGHERR DRILLING CENTER TYPE BZ
**************************************
THE MACHINE HAS 3 AGGREGATE SLIDES, OF WHICH AGGREGATE SLIDES
1 FIXED AND UNIT SLIDES 2 AND 3 VIA THE CONTROL TO PRESET VALUES
BE POSITIONED.

UNIT CARRIAGE 1 (FIXED) EQUIPPED WITH:
-------------------------------------------------- -

A) 1 DRILLING UNIT FOR DRILLING THE FRONT SIDE OF THE WORKPIECES WITH
TRIPLE DRILL HEAD, DRILLING DISTANCE: 28/41 MM
- DRILLING SPINDLES INDIVIDUALLY RETRIEVABLE
- DRILLING STROKE: MAX. 80 MM
- SPEED ??OF THE DRILLING SPINDLES: APPROX. 4000 RPM
- ENGINE POWER: APPROX. 1.1 KW
- CHIP EXTRACTION: DIAMETER 160 MM
- SUCTION HOSE UPWARDS

B) 1 STAINLESS STEEL HIGH PRESSURE GLUE NOZZLE
- LEGEMOUNT ADJUSTABLE VIA PROGRAM
- GLUE MONITORING VIA PROGRAM

C) 1 DOWEL DRIVING HEAD FOR DOWEL DIAMETER 8 MM, DOWEL LENGTH 60 MM
- FEEDING AND SEPARATION OF THE DOWELS VIA VIBRATORY CONVEYORS
3 DOWELS, ARRANGED LIKE DRILL HEAD, DRIVING IN MAX. 3 DOWELS
IN ONE OPERATION
- WORKPIECE STOP, LOWERED VIA PNEUMATIC CYLINDER, AROUND THE WORKPIECE
TO STRIKE EXACTLY

D) 1 TOP BANDBOHRAGGREGAT ARRANGED FROM ABOVE, WITH TRIPLE DRILL HEAD
FOR ROTO POT BORE
- DRILLING STROKE: MAX. 80 MM
- ENGINE POWER: APPROX. 1.1 KW
- SPEED: ABOUT 4500 RPM

E) 1 CARRIAGE WITH CONTROLLED AXIS (X)
FOR MOVING THE DRILLING, GLUEING AND DIVIDING UNIT TO THE PROGRAMMED
DRILLING POSITIONS
- SWIVEL AXIS, SWIVEL RANGE 90 °
FOR CONVERTING THE DRILLING UNIT FROM END TO LONGITUDINAL OPERATION
HERE, THE ENTIRE AXIS (X) IS ALSO SWIVELED AROUND THIS AXIS
TO BE USED FOR LONGITUDINAL OPERATION

AGGREGATE CARRIAGE 2

THE ENTIRE UNIT CAN BE POSITIONED IN THE X-AXIS VIA A SERVOMOTOR AND
CAN THUS REACH ANY POSITION ON THE WORKPIECE AND THERE THE PROGRAMMED
DOING WORK.

THE AGGREGATE CARRIAGE IS EQUIPPED WITH:

A) DRILLING UNIT WITH 3 INDIVIDUALLY RETRIEVABLE SPINDLES FOR DRILLING THE
FIGHTER, RUNG AND POST DRILLING PATTERNS ON THE LONG SIDE OF THE WORKPIECE
OR THE DOWEL HOLES ON THE WORKPIECE ENDS.
- DRILLING DISTANCE: 28/41 MM
- DRILLING STROKE FOR EACH SPINDLE: MAX. 80 MM
- SPEED: ABOUT 4000 RPM
- ENGINE POWER: APPROX. 1.1 KW

B) DRILLING UNIT FOR LOCK PLATE HOLE, EQUIPPED WITH:

- SIMPLE BORING HEAD
- FIXED IN HEIGHT - DISTANCE FROM WORKPIECE SUPPORT: 51 MM
- DRILL DIAMETER: 2.5 MM
- DRILLING STROKE: MAX. 80 MM
- SPEED: ABOUT 4500 RPM
- ENGINE POWER: APPROX. 1.1 KW

C) DRILLING UNIT FOR MOUNTING HOLES:

- DRILLING STROKE: MAX. 80 MM
- SPEED: ABOUT 4500 RPM
- ENGINE POWER: APPROX. 1.1 KW
- MECHANICALLY FIXED IN HEIGHT - DISTANCE FROM WORKPIECE SUPPORT: 31 MM

D) WORKPIECE SUPPORT TABLE
WITH PNEUMATIC WORKPIECE CLAMPING DEVICE AND MOUNTED TOPFANDBOHRAGGREGAT
- CAN BE DISCONNECTED VOOM UNIT CARRIAGE (PNEUMATIC) AND THE
AGGREGATE SLIDES CAN EACH OVER THIS POINT LEFT OR RIGHT
BOHRAUFGABENAUSFüHREN. THIS IS HORIZONTAL FROM EACH ONE
ARRANGED AGGREGATE POSSIBLE UNTIL THE END OF THE WORKPIECE

E) TOPFANDBOHRAGGREGAT ARRANGED FROM ABOVE WITH TRIPLE DRILL HEAD
FOR ROTO POT BORE
- DRILLING STROKE: MAX. 80 MM
- ENGINE POWER: APPROX. 1.1 KW
- SPEED: ABOUT 4500 RPM

AGGREGATE CARRIAGE 3

SERVO AXIS IN X DIRECTION, THIS TURNS ON PROGRAM ON THE
WORKPIECE LENGTH.

A) 1 DRILLING UNIT FOR DRILLING THE FRONT SIDE OF THE WERSKTüCKE WITH TRIPLE
DRILL HEAD
- DRILLING DISTANCE: 28/41 MM
- DRILLING SPINDLES INDIVIDUALLY RETRIEVABLE
- DRILLING STROKE: MAX. 80 MM
- DREHZHAL THE DRILL SPINDLES: ABOUT 4000 U / MIN
- ENGINE POWER: APPROX. 1.1 KW
- CHIP EXTRACTION: DIAMETER 160 MM
- SUCTION HOSE UPWARDS

B) 1 STAINLESS STEEL HIGH PRESSURE GLUE NOZZLE
- LEGEMOUNT ADJUSTABLE VIA PROGRAM
- GLUE MONITORING VIA PROGRAM

C) 1 DOWEL DRIVING HEAD FOR DOWEL DIAMETER 8 MM, DOWEL LENGTH 60 MM
- FEEDING AND SEPARATION OF THE DOWELS VIA VIBRATORY CONVEYORS
- 3 DOWELS, ARRANGED LIKE DRILL HEAD, DRIVING MAX. 3 DOWELS
IN ONE OPERATION
- WORKPIECE STOP, LOWERED VIA PNEUMATIC CYLINDER, AROUND THE WORKPIECE
TO STRIKE EXACTLY

D) 1 TOPFBANDBOHRAGGREGAT ARRANGED FROM ABOVE
WITH TRIPLE DRILL HEAD FOR ROTO POT BORE
- DRILLING STROKE: MAX. 80 MM
- ENGINE POWER: APPROX. 1.1 KW
- SPEED: ABOUT 4500 RPM

E) 1 CARRIAGE WITH CONTROLLED AXIS (X)
FOR MOVING THE DRILLING, GLUE AND DOWEL UNIT TO THE PROGRAMMED
DRILLING POSITIONS
- SWIVEL AXIS, SWIVEL RANGE 90 °, FOR CONVERTING THE DRILLING UNIT OF
FOREHEAD-ON LONGITUDINAL OPERATION.
HERE, THE ENTIRE AXIS (X) IS ALSO SWIVELED AROUND THIS AXIS
TO BE USED FOR LONGITUDINAL OPERATION

THE ENTIRE UNIT CAN BE POSITIONED IN THE X-AXIS VIA A SERVOMOTOR AND
CAN THUS REACH ANY POSITION ON THE WORKPIECE AND THERE THE PROGRAMMED
DOING WORK.

WORKPIECE LENGTH SCANNING, SO THAT THE END HOLES ARE AT THE EXACT DISTANCE FROM
EXTERNAL DIMENSIONS CAN BE SET.
DRILLING UNIT AUTOMATICALLY CORRECTS ANY LENGTH DEVIATIONS ON THE WORKPIECE
WITHIN A CERTAIN TOLERANCE RANGE.

FOR WORKPIECES LONGER THAN 3 M, THIS WORKPIECE MUST BE IN TWO WORKING LENGTHS
BE PROCESSED.

TECHNICAL SPECIFICATIONS:

- MAX. WORKPIECE LENGTH: 3000 MM
- MIN. WORKPIECE LENGTH: 320 MM
- WORKPIECE THICKNESS: 40-80 MM
- WORKPIECE CLAMPING: PNEUMATIC
- WORKPIECE LOADING OR UNLOADING: MANUALLY
- ALL TRAVEL PATHS RUN ON HIGH-PRECISION LINEAR GUIDES
- 4 ELECTRONICALLY PROGRAM CONTROLLED AXES (BALL SCREW OPERATION
OR RACK)
- HIGH-PRESSURE GLUE SYSTEM IN STAINLESS STEEL
- GLUE MONITORING VIA PROGRAM
- LEICHENGE ADJUSTABLE VIA CONTROL
- 1 DOWEL VIBRATION CONVEYOR (LARGE VERSION) FOR ANCHOR DIAMETER 8 MM,
DOWEL LENGTH 60 MM
- SIX-TRACK DOWEL SEPARATION AND FEED (3X FOR RIGHT, 3X FOR LEFT)

MACHINE POWER IS ABOUT 4 PARTS PER MINUTE. THIS IS AN AVERAGE,
WHICH IN INDIVIDUAL CASES MAY VARY SLIGHTLY UPWARDS OR DOWNWARDS.

CONTROL OF THE MACHINE

- PC / PLC CONTROL BASED ON WINDOWS
- PC IN INDUSTRIAL DESIGN WITH FLOPPY DISK DRIVE, KEYBOARD AND
15FARBBILD FLAT MONITOR
- USER FRIENDLY MACHINE PROGRAM
- HIGH STORAGE CAPACITY
- GRAPHIC BLOCKS FOR VISUALIZATION OF THE PROGRAMMED DRILLING PATTERNS
PROGRAM WITH ERROR INDICATION, I. ERRORS THAT OCCUR IN THE PROGRAM FLOW
CAN BE DISPLAYED ON THE SCREEN AND CAN THEREBY
BE LOCALIZED FASTER AND CORRECTED.

- EXTRACTION: 3 X DIAMETER 160 UPWARDS
- EXTRACTION SPEED: APPROX. 25 M / S

THE MACHINE IS ONLINE-ENABLED


(TECHN. DATA ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-year built: approx 1980
blade length: 300 mm
cutting width: 290 mm
gr. material thickness: 80 x 10 mm
machine weight: 250 kg

equipment / accessories
pneumatic release for continuous operation
foot switch
machine base

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
each party has the opportunity to test the snips in advance under power.
 YEAR BUILT: APPROX 1980 BLADE LENGTH: 300 MM CUTTING WIDTH: 290 MM GR. MATERIAL THICKNESS: 80 X 10 MM MACHINE WEIGHT: 250 KG EQUIPMENT / ACCESSORIES PNEUMATIC RELEASE FOR CONTINUOUS OPERATION FOOT SWITCH MACHINE BASE ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EACH PARTY HAS THE OPPORTUNITY TO TEST THE SNIPS IN ADVANCE UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 130 mm<br/>gear width: 25 mm<br/>max. module: 4 <br/>min. module: 0,5 <br/>control: 840 d siemens<br/>strokes - infinitely variable: 500-2500 hub/min<br/>stroke: 30 mm<br/>column swivelling: 0-12 grad<br/>work-spindle diameter: 85 mm<br/>total power requirement: 49 kw<br/>weight of the machine ca.: 11.5 t<br/>dimensions of the machine ca.: 6,4 x 4,5 x 4,4 m<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 130 MM
GEAR WIDTH: 25 MM
MAX. MODULE: 4
MIN. MODULE: 0,5
CONTROL: 840 D SIEMENS
STROKES - INFINITELY VARIABLE: 500-2500 HUB/MIN
STROKE: 30 MM
COLUMN SWIVELLING: 0-12 GRAD
WORK-SPINDLE DIAMETER: 85 MM
TOTAL POWER REQUIREMENT: 49 KW
WEIGHT OF THE MACHINE CA.: 11.5 T
DIMENSIONS OF THE MACHINE CA.: 6,4 X 4,5 X 4,4 M




Vendedor: Emuk Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 14.900 €
Ubicación: Land-profile milling and profile grinding machine brandt - arminius, specifically for stair construction

thank you, that you are interested in our offers. if you have specific questions, please use the telephone, personal interview questions can clarify faster than by mail.

a video of the current machine can be sent on request.

ideal machine for stair builders and solid wood processor
5 units:
1 edge grinding unit with 120 mm band, pneumatic belt tension and electro-pneumatic controlled sanding shoe
2 milling units 1, 5kw to radius milling, swiveling
2 units of profile grinding with belt and electro-pneumatic controlled sanding shoe

secure workpiece clamping chain plates and upper pressure roller
workpiece thickness up to approx. 60 mm
adjustable feed speed
easy pull-out workpiece support
machine is currently equipped with milling cutters r8

operating instructions
ce mark
after painted in places
great machine with outstanding sanding results, hardly rework required. ideal for the efficient production of stairs or table tops.

dimensions approx. 4000 x 1300 x 1900mm (lxwxh). weight approx. 1200kg. 

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". PROFILE MILLING AND PROFILE GRINDING MACHINE BRANDT - ARMINIUS, SPECIFICALLY FOR STAIR CONSTRUCTION THANK YOU, THAT YOU ARE INTERESTED IN OUR OFFERS. IF YOU HAVE SPECIFIC QUESTIONS, PLEASE USE THE TELEPHONE, PERSONAL INTERVIEW QUESTIONS CAN CLARIFY FASTER THAN BY MAIL. A VIDEO OF THE CURRENT MACHINE CAN BE SENT ON REQUEST. IDEAL MACHINE FOR STAIR BUILDERS AND SOLID WOOD PROCESSOR 5 UNITS: 1 EDGE GRINDING UNIT WITH 120 MM BAND, PNEUMATIC BELT TENSION AND ELECTRO-PNEUMATIC CONTROLLED SANDING SHOE 2 MILLING UNITS 1, 5KW TO RADIUS MILLING, SWIVELING 2 UNITS OF PROFILE GRINDING WITH BELT AND ELECTRO-PNEUMATIC CONTROLLED SANDING SHOE SECURE WORKPIECE CLAMPING CHAIN PLATES AND UPPER PRESSURE ROLLER WORKPIECE THICKNESS UP TO APPROX. 60 MM ADJUSTABLE FEED SPEED EASY PULL-OUT WORKPIECE SUPPORT MACHINE IS CURRENTLY EQUIPPED WITH MILLING CUTTERS R8 OPERATING INSTRUCTIONS CE MARK AFTER PAINTED IN PLACES GREAT MACHINE WITH OUTSTANDING SANDING RESULTS, HARDLY REWORK REQUIRED. IDEAL FOR THE EFFICIENT PRODUCTION OF STAIRS OR TABLE TOPS. DIMENSIONS APPROX. 4000 X 1300 X 1900MM (LXWXH). WEIGHT APPROX. 1200KG. PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Ubicación: Land-weight approx.: 40 kg<br/>dimensions (l x w x h) approx.: 500 x 500 x 0 mm<br/>description: . WEIGHT APPROX.: 40 KG
DIMENSIONS (L X W X H) APPROX.: 500 X 500 X 0 MM
DESCRIPTION: .
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-we are pleased to offer: 

total number of impressions / hours:	38,037hrs 
max speed rating (sheets / hr)	5,000 
sheet size / print size (max / min)	1260 x 840mm max, 500 x 350mm min 
platen force generated – tonne	500 tonnes 
substrate types (paper / board / corrugate)	board 
substrate handling devices and type:	
non-stop feeder / delivery:	yes, but no nonstop swords available 
pile height (with / without non-stop) - feeder	
pile height (with / without non-stop) - delivery	
sheet slow-down device	yes 
anti-static system	yes 
honeycomb plates	3 honeycombs, 6 plates 
number of foil spindle sets in machine	3 
foil streams (max number)	6 
foil reel size (diameter min / max )	30mm / 215mm 
foil reel width (width min / max )	50mm min / 1260mm max 
foil waste removal system & type	hunkler baler 
control console	
honeycomb transporter 
3 honeycombs in total 
6 plates 
foil spindle devices 13 
lifting devices	crane 

estimated overall weight (tonne)	22 tons 
length (m)	9 
width (m)	6 
height (m)	2.8 
total power consumption (volt/phase/amps)	440/3/56 (75a switched supply) 
in production 
good condition 
inspection welcome 
full and complete WE ARE PLEASED TO OFFER: TOTAL NUMBER OF IMPRESSIONS / HOURS: 38,037HRS MAX SPEED RATING (SHEETS / HR) 5,000 SHEET SIZE / PRINT SIZE (MAX / MIN) 1260 X 840MM MAX, 500 X 350MM MIN PLATEN FORCE GENERATED – TONNE 500 TONNES SUBSTRATE TYPES (PAPER / BOARD / CORRUGATE) BOARD SUBSTRATE HANDLING DEVICES AND TYPE: NON-STOP FEEDER / DELIVERY: YES, BUT NO NONSTOP SWORDS AVAILABLE PILE HEIGHT (WITH / WITHOUT NON-STOP) - FEEDER PILE HEIGHT (WITH / WITHOUT NON-STOP) - DELIVERY SHEET SLOW-DOWN DEVICE YES ANTI-STATIC SYSTEM YES HONEYCOMB PLATES 3 HONEYCOMBS, 6 PLATES NUMBER OF FOIL SPINDLE SETS IN MACHINE 3 FOIL STREAMS (MAX NUMBER) 6 FOIL REEL SIZE (DIAMETER MIN / MAX ) 30MM / 215MM FOIL REEL WIDTH (WIDTH MIN / MAX ) 50MM MIN / 1260MM MAX FOIL WASTE REMOVAL SYSTEM & TYPE HUNKLER BALER CONTROL CONSOLE HONEYCOMB TRANSPORTER 3 HONEYCOMBS IN TOTAL 6 PLATES FOIL SPINDLE DEVICES 13 LIFTING DEVICES CRANE ESTIMATED OVERALL WEIGHT (TONNE) 22 TONS LENGTH (M) 9 WIDTH (M) 6 HEIGHT (M) 2.8 TOTAL POWER CONSUMPTION (VOLT/PHASE/AMPS) 440/3/56 (75A SWITCHED SUPPLY) IN PRODUCTION GOOD CONDITION INSPECTION WELCOME FULL AND COMPLETE
Vendedor: Jerry Curtin Limited
Año de construcción: usado
Precio: used machinery auction RESALE 7.500 €
Ubicación: Land-weight approx.: 4000 kg<br/>dimensions (l x w x h) approx.: 11000 x 3000 x 3500 mm<br/>description: erregi packaging line<br> serial number c3gb152002<br> maximum piece width 1500 mm<br> number of packaging rolls: 6 pcs.<br> swivel arm to help load the coils<br> power of the packaging machine 8.6 kw<br> heating tunnel serial number t700152002<br> heating tunnel width 1500 mm<br> maximum tunnel height 900 mm<br> power of the tunnel 54 kw<br> ce standards WEIGHT APPROX.: 4000 KG
DIMENSIONS (L X W X H) APPROX.: 11000 X 3000 X 3500 MM
DESCRIPTION: ERREGI PACKAGING LINE
SERIAL NUMBER C3GB152002
MAXIMUM PIECE WIDTH 1500 MM
NUMBER OF PACKAGING ROLLS: 6 PCS.
SWIVEL ARM TO HELP LOAD THE COILS
POWER OF THE PACKAGING MACHINE 8.6 KW
HEATING TUNNEL SERIAL NUMBER T700152002
HEATING TUNNEL WIDTH 1500 MM
MAXIMUM TUNNEL HEIGHT 900 MM
POWER OF THE TUNNEL 54 KW
CE STANDARDS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-technical data
 tip height 110 mm
 centre distance 300 mm
 swing over cross slide 115 mm
 spindle bore 32 mm
 sled:
 longitudinal travel (z axis) 295 mm
 plan travel (x-axis) 220 mm
 turret slide: number 1
 number of positions revolver 8
 sleeve diameter 35 mm
 spindle retainer: camlock
 spindle speeds:
 continuously variable from 30 rpm to 6000 rpm
 tailstock quill recording:
 morse taper 2 mk
 quill stroke 100 mm
 feeds: continuously variable
 length of 0.1 mm / min up to 5000 mm/min
 map of 0.1 mm / min up to 5000 mm/min
 rapid traverse 10 m / min
 kw spindle motor 5.50
 connection 50 hz 3 x 380 volt
 machine weight 1350 kg
 dimensions machine:
 length 1700 mm
 1942 mm wide
 1774 mm

miscellaneous accessories:
 lighting
 coolant system
 splash guard cabin complete
 central lubrication system
 electronic handwheel
 interface rs 232
 c axis with interpolation
 chip conveyor
 tool holder set
 driven tool holders
 collet chucks
 bucher TECHNICAL DATA TIP HEIGHT 110 MM CENTRE DISTANCE 300 MM SWING OVER CROSS SLIDE 115 MM SPINDLE BORE 32 MM SLED: LONGITUDINAL TRAVEL (Z AXIS) 295 MM PLAN TRAVEL (X-AXIS) 220 MM TURRET SLIDE: NUMBER 1 NUMBER OF POSITIONS REVOLVER 8 SLEEVE DIAMETER 35 MM SPINDLE RETAINER: CAMLOCK SPINDLE SPEEDS: CONTINUOUSLY VARIABLE FROM 30 RPM TO 6000 RPM TAILSTOCK QUILL RECORDING: MORSE TAPER 2 MK QUILL STROKE 100 MM FEEDS: CONTINUOUSLY VARIABLE LENGTH OF 0.1 MM / MIN UP TO 5000 MM/MIN MAP OF 0.1 MM / MIN UP TO 5000 MM/MIN RAPID TRAVERSE 10 M / MIN KW SPINDLE MOTOR 5.50 CONNECTION 50 HZ 3 X 380 VOLT MACHINE WEIGHT 1350 KG DIMENSIONS MACHINE: LENGTH 1700 MM 1942 MM WIDE 1774 MM MISCELLANEOUS ACCESSORIES: LIGHTING COOLANT SYSTEM SPLASH GUARD CABIN COMPLETE CENTRAL LUBRICATION SYSTEM ELECTRONIC HANDWHEEL INTERFACE RS 232 C AXIS WITH INTERPOLATION CHIP CONVEYOR TOOL HOLDER SET DRIVEN TOOL HOLDERS COLLET CHUCKS BUCHER
Vendedor: Maschinenhandel Eersel
Año de construcción: usado
Precio: used machinery auction RESALE 65 €
Ubicación: Land-weight approx.: 22 kg<br/>dimensions (l x w x h) approx.: 600x600x600 mm<br/>description: swivel and swivel from 0 ° to 45 °, for more details see pictures WEIGHT APPROX.: 22 KG
DIMENSIONS (L X W X H) APPROX.: 600X600X600 MM
DESCRIPTION: SWIVEL AND SWIVEL FROM 0 ° TO 45 °, FOR MORE DETAILS SEE PICTURES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-used dmg gildemeister twin 65 with y-b axis
control siemens 840 d powerline

technical data:
max. swing diameter  mm 250
max. turning diameter  mm 200
spindle distance mm 900

main spindle
max speed min-1 5,000
max bar passage mm 66

counter spindle
max speed min-1 5,000
maximum partial bar passage 66 x 650 mm
travel x-z axis mm 175 / 670
tailstock mounted taper mt 4

2 turrets with driven tools
speed driven tools min-1 4,000

slide 1 (top turret)
travel x - z axis mm 300 / 600
travel y mm +/-40
swing angle b axis (turret) degree -135°/+ 45°

slide 2 (lower turret)
travel path x - z axis mm 180 / 650

accessories:
y axis upper turret
b-axis upper turret
tailstock on counter spindle slide
workpiece - pickup equipment with gripper and conveyor belt
collet chuck on main and sub spindle
short rod feeder
chip conveyor
increased coolant system 20 bar  USED DMG GILDEMEISTER TWIN 65 WITH Y-B AXIS CONTROL SIEMENS 840 D POWERLINE TECHNICAL DATA: MAX. SWING DIAMETER MM 250 MAX. TURNING DIAMETER MM 200 SPINDLE DISTANCE MM 900 MAIN SPINDLE MAX SPEED MIN-1 5,000 MAX BAR PASSAGE MM 66 COUNTER SPINDLE MAX SPEED MIN-1 5,000 MAXIMUM PARTIAL BAR PASSAGE 66 X 650 MM TRAVEL X-Z AXIS MM 175 / 670 TAILSTOCK MOUNTED TAPER MT 4 2 TURRETS WITH DRIVEN TOOLS SPEED DRIVEN TOOLS MIN-1 4,000 SLIDE 1 (TOP TURRET) TRAVEL X - Z AXIS MM 300 / 600 TRAVEL Y MM +/-40 SWING ANGLE B AXIS (TURRET) DEGREE -135°/+ 45° SLIDE 2 (LOWER TURRET) TRAVEL PATH X - Z AXIS MM 180 / 650 ACCESSORIES: Y AXIS UPPER TURRET B-AXIS UPPER TURRET TAILSTOCK ON COUNTER SPINDLE SLIDE WORKPIECE - PICKUP EQUIPMENT WITH GRIPPER AND CONVEYOR BELT COLLET CHUCK ON MAIN AND SUB SPINDLE SHORT ROD FEEDER CHIP CONVEYOR INCREASED COOLANT SYSTEM 20 BAR
Vendedor: GEMATEC GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 60 €
Ubicación: Land-weight approx.: 13 kg<br/>dimensions (l x w x h) approx.: 500x500x500 mm<br/>description: swivel and swivel from 0 ° to 45 °, for more details see pictures WEIGHT APPROX.: 13 KG
DIMENSIONS (L X W X H) APPROX.: 500X500X500 MM
DESCRIPTION: SWIVEL AND SWIVEL FROM 0 ° TO 45 °, FOR MORE DETAILS SEE PICTURES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-it is a used seewer rondo kombi dough sheeter sso 68 (stainless steel version) for sale. the machine is in very good condition, works and runs quietly, the bands are new.
technical data:
-strip width 620 mm
- overall width without dough drip tray: 2720 mm
-roller delivery: 4 programs manual can be switched on
- voltage: 400 v, 60 hz
a video can be sent on request.

price on request. IT IS A USED SEEWER RONDO KOMBI DOUGH SHEETER SSO 68 (STAINLESS STEEL VERSION) FOR SALE. THE MACHINE IS IN VERY GOOD CONDITION, WORKS AND RUNS QUIETLY, THE BANDS ARE NEW. TECHNICAL DATA: -STRIP WIDTH 620 MM - OVERALL WIDTH WITHOUT DOUGH DRIP TRAY: 2720 MM -ROLLER DELIVERY: 4 PROGRAMS MANUAL CAN BE SWITCHED ON - VOLTAGE: 400 V, 60 HZ A VIDEO CAN BE SENT ON REQUEST. PRICE ON REQUEST.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Precio: used machinery auction RESALE 65 €
Ubicación: Land-weight approx.: 22 kg<br/>dimensions (l x w x h) approx.: 600x600x600 mm<br/>description: swivel and swivel from 0 ° to 45 °, for more details see pictures WEIGHT APPROX.: 22 KG
DIMENSIONS (L X W X H) APPROX.: 600X600X600 MM
DESCRIPTION: SWIVEL AND SWIVEL FROM 0 ° TO 45 °, FOR MORE DETAILS SEE PICTURES
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)