6 ofertas

Año de construcción: usado
Ubicación: Land-dai.of column: 432 mm
distance from column surface to spindle center , max: 1580 mm
distance from column surface to spindle center , min: 440 mm
travel of spindle head: 1140 mm
distance from base surface to spindle end , max: 1600 mm
distance from base surface to spindle end , min: 380 mm
elevating height of arm: 850 mm
effective area of box table: 700x500x400 mm
dimension of base: 2480x1050x210 mm
taper hole spindle: mt#5
stroke of spindle: 370
r.p.m of spindle (rpm x steps): 40-1920x12 steps 
feed of spindle (rev. x steps): 7 1/2hp
main motor (hp): 2hp
elevating motor (hp): 2hp
hydraulic clamping motor (hp): 1 hp
coolant equipment (hp): 1/8 hp
machine height from floor (max.): 3170 mm
base + column height: 2660 mm 
net weight (approx)kgs: 4600
shipping weight (approx)kgs: 5100
shipping dimensions (lxwxh): 2850x1400x2940 mm

    DAI.OF COLUMN: 432 MM DISTANCE FROM COLUMN SURFACE TO SPINDLE CENTER , MAX: 1580 MM DISTANCE FROM COLUMN SURFACE TO SPINDLE CENTER , MIN: 440 MM TRAVEL OF SPINDLE HEAD: 1140 MM DISTANCE FROM BASE SURFACE TO SPINDLE END , MAX: 1600 MM DISTANCE FROM BASE SURFACE TO SPINDLE END , MIN: 380 MM ELEVATING HEIGHT OF ARM: 850 MM EFFECTIVE AREA OF BOX TABLE: 700X500X400 MM DIMENSION OF BASE: 2480X1050X210 MM TAPER HOLE SPINDLE: MT#5 STROKE OF SPINDLE: 370 R.P.M OF SPINDLE (RPM X STEPS): 40-1920X12 STEPS FEED OF SPINDLE (REV. X STEPS): 7 1/2HP MAIN MOTOR (HP): 2HP ELEVATING MOTOR (HP): 2HP HYDRAULIC CLAMPING MOTOR (HP): 1 HP COOLANT EQUIPMENT (HP): 1/8 HP MACHINE HEIGHT FROM FLOOR (MAX.): 3170 MM BASE + COLUMN HEIGHT: 2660 MM NET WEIGHT (APPROX)KGS: 4600 SHIPPING WEIGHT (APPROX)KGS: 5100 SHIPPING DIMENSIONS (LXWXH): 2850X1400X2940 MM
Vendedor: BASTA machinery
Año de construcción: usado
Precio: 10.500 €
Ubicación: Land-: 32 mm<br/>: 50 mm<br/>: 25 m<br/>: 32 m<br/>: 210 mm<br/>: 1,5 kw<br/>: 220 mm<br/>: 1.260 x 640 x 160 mm<br/>: 600 x 445 x 380 mm<br/>: 1.800 mm<br/>: 830 mm<br/>: 2.190 mm<br/>: 2.320 mm<br/>: 1.250 kg<br/>left/right rotation<br/>automatic feed<br/>drilling depth limit<br/>manual headstock adjustment with mechanical clamping<br/>electric height adjustment of extension arm and mechanical clamping<br/>mechanical clamping of swivel movement of extension arm<br/>central operation panel on the front side<br/>power load readout for drilling spindle<br/>hand wheel for spindle fine feed<br/>coolant equipment <br/>machine lamp <br/>box table<br/>machine and equipment according to the ce-regulations<br/>operating manual in german and english<br/><br/><br/><br/>drilling capacity steel: 32 mm<br/>drilling capacity cast iron: 50 mm<br/>thread cutting capacitiy steel: m 25<br/>thread cutting capacitiy cast iron: m 32<br/>mt: 4<br/>column Ø: 210 mm<br/>gap: 220 - 950 mm<br/>revs: 73 - 1.247 r/min (6)<br/>aut. feeds: 0,05 - 0,15 mm/r (3)<br/>spindle motor: 1,5 kw<br/>elvating motor: 0,75 kw<br/>spindle travel: 220 mm<br/>distance spindle to base plate: 350 - 1.210 mm<br/>base plate dimesions: 1.260 x 640 x 160 mm<br/>box table dimensions: 600 x 445 x 380 mm<br/>length: 1.800 mm<br/>width: 830 mm<br/>height: 2.190 mm<br/>max. height: 2.320 mm<br/>weight: 1.250 kg<br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> : 32 MM
: 50 MM
: 25 M
: 32 M
: 210 MM
: 1,5 KW
: 220 MM
: 1.260 X 640 X 160 MM
: 600 X 445 X 380 MM
: 1.800 MM
: 830 MM
: 2.190 MM
: 2.320 MM
: 1.250 KG
LEFT/RIGHT ROTATION
AUTOMATIC FEED
DRILLING DEPTH LIMIT
MANUAL HEADSTOCK ADJUSTMENT WITH MECHANICAL CLAMPING
ELECTRIC HEIGHT ADJUSTMENT OF EXTENSION ARM AND MECHANICAL CLAMPING
MECHANICAL CLAMPING OF SWIVEL MOVEMENT OF EXTENSION ARM
CENTRAL OPERATION PANEL ON THE FRONT SIDE
POWER LOAD READOUT FOR DRILLING SPINDLE
HAND WHEEL FOR SPINDLE FINE FEED
COOLANT EQUIPMENT
MACHINE LAMP
BOX TABLE
MACHINE AND EQUIPMENT ACCORDING TO THE CE-REGULATIONS
OPERATING MANUAL IN GERMAN AND ENGLISH



DRILLING CAPACITY STEEL: 32 MM
DRILLING CAPACITY CAST IRON: 50 MM
THREAD CUTTING CAPACITIY STEEL: M 25
THREAD CUTTING CAPACITIY CAST IRON: M 32
MT: 4
COLUMN Ø: 210 MM
GAP: 220 - 950 MM
REVS: 73 - 1.247 R/MIN (6)
AUT. FEEDS: 0,05 - 0,15 MM/R (3)
SPINDLE MOTOR: 1,5 KW
ELVATING MOTOR: 0,75 KW
SPINDLE TRAVEL: 220 MM
DISTANCE SPINDLE TO BASE PLATE: 350 - 1.210 MM
BASE PLATE DIMESIONS: 1.260 X 640 X 160 MM
BOX TABLE DIMENSIONS: 600 X 445 X 380 MM
LENGTH: 1.800 MM
WIDTH: 830 MM
HEIGHT: 2.190 MM
MAX. HEIGHT: 2.320 MM
WEIGHT: 1.250 KG


THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 13.200 €
Ubicación: Land-: 42 mm<br/>: 55 mm<br/>: 25 m<br/>: 38 m<br/>: 260 mm<br/>: 2,2 kw<br/>: 280 mm<br/>: 1.725 x 715 x 180 mm<br/>: 635 x 520 x 415 mm<br/>: 1.880 mm<br/>: 870 mm<br/>: 2.210 mm<br/>: 2.530 mm<br/>: 1.800 kg<br/>left/right rotation<br/>automatic feed<br/>drilling depth limit<br/>manual headstock adjustment with mechanical clamping<br/>electric height adjustment of extension arm and mechanical clamping<br/>mechanical clamping of swivel movement of extension arm<br/>central operation panel on the front side<br/>power load readout for drilling spindle<br/>hand wheel for spindle fine feed<br/>coolant equipment <br/>machine lamp <br/>box table<br/>machine and equipment according to the ce-regulations<br/>operating manual in german and english<br/><br/>drilling capacity steel: 42 mm<br/>drilling capacity cast iron: 55 mm<br/>thread cutting capacitiy steel: m 25<br/>thread cutting capacitiy cast iron: m 38<br/>mt: 4<br/>column Ø: 260 mm<br/>gap: 280 - 1.100 mm<br/>revs: 44 - 1.500 r/min (6)<br/>aut. feeds: 0,05 - 0,15 mm/r (3)<br/>spindle motor: 2,2 kw<br/>elvating motor: 0,75 kw<br/>spindle travel: 280 mm<br/>distance spindle to base plate: 470 - 1.270 mm<br/>base plate dimesions: 470 - 1.270 mm<br/>box table dimensions: 635 x 520 x 415 mm<br/>length: 1.880 mm<br/>width: 870 mm<br/>height: 2.210 mm<br/>max. height: 2.530 mm<br/>weight: 1.800 kg<br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> : 42 MM
: 55 MM
: 25 M
: 38 M
: 260 MM
: 2,2 KW
: 280 MM
: 1.725 X 715 X 180 MM
: 635 X 520 X 415 MM
: 1.880 MM
: 870 MM
: 2.210 MM
: 2.530 MM
: 1.800 KG
LEFT/RIGHT ROTATION
AUTOMATIC FEED
DRILLING DEPTH LIMIT
MANUAL HEADSTOCK ADJUSTMENT WITH MECHANICAL CLAMPING
ELECTRIC HEIGHT ADJUSTMENT OF EXTENSION ARM AND MECHANICAL CLAMPING
MECHANICAL CLAMPING OF SWIVEL MOVEMENT OF EXTENSION ARM
CENTRAL OPERATION PANEL ON THE FRONT SIDE
POWER LOAD READOUT FOR DRILLING SPINDLE
HAND WHEEL FOR SPINDLE FINE FEED
COOLANT EQUIPMENT
MACHINE LAMP
BOX TABLE
MACHINE AND EQUIPMENT ACCORDING TO THE CE-REGULATIONS
OPERATING MANUAL IN GERMAN AND ENGLISH

DRILLING CAPACITY STEEL: 42 MM
DRILLING CAPACITY CAST IRON: 55 MM
THREAD CUTTING CAPACITIY STEEL: M 25
THREAD CUTTING CAPACITIY CAST IRON: M 38
MT: 4
COLUMN Ø: 260 MM
GAP: 280 - 1.100 MM
REVS: 44 - 1.500 R/MIN (6)
AUT. FEEDS: 0,05 - 0,15 MM/R (3)
SPINDLE MOTOR: 2,2 KW
ELVATING MOTOR: 0,75 KW
SPINDLE TRAVEL: 280 MM
DISTANCE SPINDLE TO BASE PLATE: 470 - 1.270 MM
BASE PLATE DIMESIONS: 470 - 1.270 MM
BOX TABLE DIMENSIONS: 635 X 520 X 415 MM
LENGTH: 1.880 MM
WIDTH: 870 MM
HEIGHT: 2.210 MM
MAX. HEIGHT: 2.530 MM
WEIGHT: 1.800 KG


THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 23.600 €
Ubicación: Land-: 50 mm<br/>: 60 mm<br/>: 40 m<br/>: 50 m<br/>: 320 mm<br/>: 3,7 kw<br/>: 1,5 kw<br/>: 270 mm<br/>: 2.550 x 970 x 200 mm<br/>: 630 x 500 x 500 mm<br/>: 2.670 mm<br/>: 1.120 mm<br/>: 2.410 mm<br/>: 2.760 mm<br/>: 3.300 kg<br/>left/right rotation<br/>automatic feed<br/>drilling depth limit<br/>manual headstock adjustment with hydraulic clamping<br/>electric height adjustment of extension arm and hydraulic clamping<br/>hydraulic clamping of swivel movement of extension arm<br/>central operation panel on the front side<br/>power load readout for drilling spindle<br/>hand wheel for spindle fine feed<br/>coolant equipment <br/>machine lamp <br/>box table<br/>machine and equipment according to the ce-regulations<br/>operating manual in german and english<br/><br/>drilling capacity steel: 50 mm<br/>drilling capacity cast iron: 60 mm<br/>thread cutting capacitiy steel: m 40<br/>thread cutting capacitiy cast iron: m 50<br/>mt: 5<br/>column Ø: 320 mm<br/>gap: 350 - 1.600 mm<br/>revs: 56 - 1.450 r/min (12)<br/>aut. feeds: 0,06 - 0,2 mm/r (3)<br/>spindle motor: 3,7 kw<br/>elvating motor: 1,5 kw<br/>hydraulic clamping motor: 0,75 kw<br/>spindle travel: 270 mm<br/>distance spindle to base plate: 465 - 1.420 mm<br/>base plate dimesions: 2.550 x 970 x 200 mm<br/>box table dimensions: 630 x 500 x 500 mm<br/>length: 2.670 mm<br/>width: 1.120 mm<br/>height: 2.410 mm<br/>max. height: 2.760 mm<br/>weight: 3.300 kg<br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> : 50 MM
: 60 MM
: 40 M
: 50 M
: 320 MM
: 3,7 KW
: 1,5 KW
: 270 MM
: 2.550 X 970 X 200 MM
: 630 X 500 X 500 MM
: 2.670 MM
: 1.120 MM
: 2.410 MM
: 2.760 MM
: 3.300 KG
LEFT/RIGHT ROTATION
AUTOMATIC FEED
DRILLING DEPTH LIMIT
MANUAL HEADSTOCK ADJUSTMENT WITH HYDRAULIC CLAMPING
ELECTRIC HEIGHT ADJUSTMENT OF EXTENSION ARM AND HYDRAULIC CLAMPING
HYDRAULIC CLAMPING OF SWIVEL MOVEMENT OF EXTENSION ARM
CENTRAL OPERATION PANEL ON THE FRONT SIDE
POWER LOAD READOUT FOR DRILLING SPINDLE
HAND WHEEL FOR SPINDLE FINE FEED
COOLANT EQUIPMENT
MACHINE LAMP
BOX TABLE
MACHINE AND EQUIPMENT ACCORDING TO THE CE-REGULATIONS
OPERATING MANUAL IN GERMAN AND ENGLISH

DRILLING CAPACITY STEEL: 50 MM
DRILLING CAPACITY CAST IRON: 60 MM
THREAD CUTTING CAPACITIY STEEL: M 40
THREAD CUTTING CAPACITIY CAST IRON: M 50
MT: 5
COLUMN Ø: 320 MM
GAP: 350 - 1.600 MM
REVS: 56 - 1.450 R/MIN (12)
AUT. FEEDS: 0,06 - 0,2 MM/R (3)
SPINDLE MOTOR: 3,7 KW
ELVATING MOTOR: 1,5 KW
HYDRAULIC CLAMPING MOTOR: 0,75 KW
SPINDLE TRAVEL: 270 MM
DISTANCE SPINDLE TO BASE PLATE: 465 - 1.420 MM
BASE PLATE DIMESIONS: 2.550 X 970 X 200 MM
BOX TABLE DIMENSIONS: 630 X 500 X 500 MM
LENGTH: 2.670 MM
WIDTH: 1.120 MM
HEIGHT: 2.410 MM
MAX. HEIGHT: 2.760 MM
WEIGHT: 3.300 KG


THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 34.200 €
Ubicación: Land-: 65 mm<br/>: 70 mm<br/>: 50 m<br/>: 60 m<br/>: 432 mm<br/>: 5,5 kw<br/>: 1,5 kw<br/>: 370 mm<br/>: 2.480 x 1.050 x 210 mm<br/>: 700 x 500 x 400 mm<br/>: 2.850 mm<br/>: 1.400 mm<br/>: 2.940 mm<br/>: 3.170 mm<br/>: 4.600 kg<br/>left/right rotation<br/>automatic feed<br/>drilling depth limit<br/>manual headstock adjustment with hydraulic clamping<br/>electric height adjustment of extension arm and hydraulic clamping<br/>hydraulic clamping of swivel movement of extension arm<br/>central operation panel on the front side<br/>power load readout for drilling spindle<br/>hand wheel for spindle fine feed<br/>coolant equipment <br/>machine lamp <br/>box table<br/>machine and equipment according to the ce-regulations<br/>operating manual in german and english<br/><br/>(sample photo)<br/><br/>drilling capacity steel: 65 mm<br/>drilling capacity cast iron: 70 mm<br/>thread cutting capacitiy steel: m 50<br/>thread cutting capacitiy cast iron: m 60<br/>mt: 5<br/>column Ø: 432 mm<br/>gap: 440 - 1.580 mm<br/>revs: 40 - 1.920 r/min (12)<br/>aut. feeds: 0,07 - 0,96 mm/r (6)<br/>spindle motor: 5,5 kw<br/>elvating motor: 1,5 kw<br/>hydraulic clamping motor: 0,75 kw<br/>spindle travel: 370 mm<br/>distance spindle to base plate: 380 - 1.600 mm<br/>base plate dimesions: 2.480 x 1.050 x 210 mm<br/>box table dimensions: 700 x 500 x 400 mm<br/>length: 2.850 mm<br/>width: 1.400 mm<br/>height: 2.940 mm<br/>max. height: 3.170 mm<br/>weight: 4.600 kg<br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> : 65 MM
: 70 MM
: 50 M
: 60 M
: 432 MM
: 5,5 KW
: 1,5 KW
: 370 MM
: 2.480 X 1.050 X 210 MM
: 700 X 500 X 400 MM
: 2.850 MM
: 1.400 MM
: 2.940 MM
: 3.170 MM
: 4.600 KG
LEFT/RIGHT ROTATION
AUTOMATIC FEED
DRILLING DEPTH LIMIT
MANUAL HEADSTOCK ADJUSTMENT WITH HYDRAULIC CLAMPING
ELECTRIC HEIGHT ADJUSTMENT OF EXTENSION ARM AND HYDRAULIC CLAMPING
HYDRAULIC CLAMPING OF SWIVEL MOVEMENT OF EXTENSION ARM
CENTRAL OPERATION PANEL ON THE FRONT SIDE
POWER LOAD READOUT FOR DRILLING SPINDLE
HAND WHEEL FOR SPINDLE FINE FEED
COOLANT EQUIPMENT
MACHINE LAMP
BOX TABLE
MACHINE AND EQUIPMENT ACCORDING TO THE CE-REGULATIONS
OPERATING MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTO)

DRILLING CAPACITY STEEL: 65 MM
DRILLING CAPACITY CAST IRON: 70 MM
THREAD CUTTING CAPACITIY STEEL: M 50
THREAD CUTTING CAPACITIY CAST IRON: M 60
MT: 5
COLUMN Ø: 432 MM
GAP: 440 - 1.580 MM
REVS: 40 - 1.920 R/MIN (12)
AUT. FEEDS: 0,07 - 0,96 MM/R (6)
SPINDLE MOTOR: 5,5 KW
ELVATING MOTOR: 1,5 KW
HYDRAULIC CLAMPING MOTOR: 0,75 KW
SPINDLE TRAVEL: 370 MM
DISTANCE SPINDLE TO BASE PLATE: 380 - 1.600 MM
BASE PLATE DIMESIONS: 2.480 X 1.050 X 210 MM
BOX TABLE DIMENSIONS: 700 X 500 X 400 MM
LENGTH: 2.850 MM
WIDTH: 1.400 MM
HEIGHT: 2.940 MM
MAX. HEIGHT: 3.170 MM
WEIGHT: 4.600 KG


THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 19.600 €
Ubicación: Land-: 50 mm<br/>: 60 mm<br/>: 40 m<br/>: 50 m<br/>: 300 mm<br/>: 3,7 kw<br/>: 270 mm<br/>: 1.785 x 785 x 190 mm<br/>: 635 x 520 x 420 mm<br/>: 2.060 mm<br/>: 995 mm<br/>: 2.240 mm<br/>: 2.645 mm<br/>: 2.300 kg<br/>left/right rotation<br/>automatic feed<br/>drilling depth limit<br/>manual headstock adjustment with hydraulic clamping<br/>electric height adjustment of extension arm and hydraulic clamping<br/>hydraulic clamping of swivel movement of extension arm<br/>central operation panel on the front side<br/>power load readout for drilling spindle<br/>hand wheel for spindle fine feed<br/>coolant equipment <br/>machine lamp <br/>box table<br/>machine and equipment according to the ce-regulations<br/>operating manual in german and english<br/><br/><br/><br/>drilling capacity steel: 50 mm<br/>drilling capacity cast iron: 60 mm<br/>thread cutting capacitiy steel: m 40<br/>thread cutting capacitiy cast iron: m 50<br/>mt: 5<br/>column Ø: 300 mm<br/>gap: 360 - 1.250 mm<br/>revs: 44 - 1.206 r/min (12)<br/>aut. feeds: 0,06 - 0,2 mm/r (3)<br/>spindle motor: 3,7 kw<br/>elvating motor: 0,75 kw<br/>hydraulic clamping motor: 0,75 kw<br/>spindle travel: 270 mm<br/>distance spindle to base plate: 441 - 1.345 mm<br/>base plate dimesions: 1.785 x 785 x 190 mm<br/>box table dimensions: 635 x 520 x 420 mm<br/>length: 2.060 mm<br/>width: 995 mm<br/>height: 2.240 mm<br/>max. height: 2.645 mm<br/>weight: 2.300 kg<br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> : 50 MM
: 60 MM
: 40 M
: 50 M
: 300 MM
: 3,7 KW
: 270 MM
: 1.785 X 785 X 190 MM
: 635 X 520 X 420 MM
: 2.060 MM
: 995 MM
: 2.240 MM
: 2.645 MM
: 2.300 KG
LEFT/RIGHT ROTATION
AUTOMATIC FEED
DRILLING DEPTH LIMIT
MANUAL HEADSTOCK ADJUSTMENT WITH HYDRAULIC CLAMPING
ELECTRIC HEIGHT ADJUSTMENT OF EXTENSION ARM AND HYDRAULIC CLAMPING
HYDRAULIC CLAMPING OF SWIVEL MOVEMENT OF EXTENSION ARM
CENTRAL OPERATION PANEL ON THE FRONT SIDE
POWER LOAD READOUT FOR DRILLING SPINDLE
HAND WHEEL FOR SPINDLE FINE FEED
COOLANT EQUIPMENT
MACHINE LAMP
BOX TABLE
MACHINE AND EQUIPMENT ACCORDING TO THE CE-REGULATIONS
OPERATING MANUAL IN GERMAN AND ENGLISH



DRILLING CAPACITY STEEL: 50 MM
DRILLING CAPACITY CAST IRON: 60 MM
THREAD CUTTING CAPACITIY STEEL: M 40
THREAD CUTTING CAPACITIY CAST IRON: M 50
MT: 5
COLUMN Ø: 300 MM
GAP: 360 - 1.250 MM
REVS: 44 - 1.206 R/MIN (12)
AUT. FEEDS: 0,06 - 0,2 MM/R (3)
SPINDLE MOTOR: 3,7 KW
ELVATING MOTOR: 0,75 KW
HYDRAULIC CLAMPING MOTOR: 0,75 KW
SPINDLE TRAVEL: 270 MM
DISTANCE SPINDLE TO BASE PLATE: 441 - 1.345 MM
BASE PLATE DIMESIONS: 1.785 X 785 X 190 MM
BOX TABLE DIMENSIONS: 635 X 520 X 420 MM
LENGTH: 2.060 MM
WIDTH: 995 MM
HEIGHT: 2.240 MM
MAX. HEIGHT: 2.645 MM
WEIGHT: 2.300 KG


THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: HESSE+CO GesmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more TAILIFT types: