245 ofertas

Año de construcción: usado
Ubicación: Land-boy 80a / machine was used for testing and as a demonstration machine / operating hours: 24,000
year of construction: 2000

injection unit:
screw diameter: 36 mm
shot weight: 132 g
injection pressure: 2085 bar
dosing volume: 147.6 ccm

clamping unit:
clamping force: 80 t
tie bar distance: 410 x 358 mm
size of the clamping plates: 680x555mm
ejector: hydraulic
clamping unit: hydraulic

control: procan - touch control / monitor

additional equipment:
machine was used for testing and as a demonstration machine
hours of operation: 24,000
euromap
robot interface
control with core pulling
injection unit cured - bi
clamping unit on two piston
in addition the machine has new, unused original injection unit of the marek boy, dia 42 mm screw diameter injection unit complete with equipment (heibã¤nder, thermocouples) - purchase for additional payment

dimensions:
weight: 3515 kg
length/width/height: 4.14 x 1.21 x 2.07 m

drive:
pump/motor: 15 kw
heating capacity: 10.4 kw
cylinder heating: 25.4 kw

price: on request BOY 80A / MACHINE WAS USED FOR TESTING AND AS A DEMONSTRATION MACHINE / OPERATING HOURS: 24,000 YEAR OF CONSTRUCTION: 2000 INJECTION UNIT: SCREW DIAMETER: 36 MM SHOT WEIGHT: 132 G INJECTION PRESSURE: 2085 BAR DOSING VOLUME: 147.6 CCM CLAMPING UNIT: CLAMPING FORCE: 80 T TIE BAR DISTANCE: 410 X 358 MM SIZE OF THE CLAMPING PLATES: 680X555MM EJECTOR: HYDRAULIC CLAMPING UNIT: HYDRAULIC CONTROL: PROCAN - TOUCH CONTROL / MONITOR ADDITIONAL EQUIPMENT: MACHINE WAS USED FOR TESTING AND AS A DEMONSTRATION MACHINE HOURS OF OPERATION: 24,000 EUROMAP ROBOT INTERFACE CONTROL WITH CORE PULLING INJECTION UNIT CURED - BI CLAMPING UNIT ON TWO PISTON IN ADDITION THE MACHINE HAS NEW, UNUSED ORIGINAL INJECTION UNIT OF THE MAREK BOY, DIA 42 MM SCREW DIAMETER INJECTION UNIT COMPLETE WITH EQUIPMENT (HEIBäNDER, THERMOCOUPLES) - PURCHASE FOR ADDITIONAL PAYMENT DIMENSIONS: WEIGHT: 3515 KG LENGTH/WIDTH/HEIGHT: 4.14 X 1.21 X 2.07 M DRIVE: PUMP/MOTOR: 15 KW HEATING CAPACITY: 10.4 KW CYLINDER HEATING: 25.4 KW PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Ubicación: Land-bowl doublejacked with thermooil, \r\nbowl: approx. 130 l,  Ø 550 mm, h 570 mm\r\nelectric heating, digital temperature adjustment\r\nbowl + mixer stainless steel\r\n BOWL DOUBLEJACKED WITH THERMOOIL, \R\NBOWL: APPROX. 130 L, Ø 550 MM, H 570 MM\R\NELECTRIC HEATING, DIGITAL TEMPERATURE ADJUSTMENT\R\NBOWL + MIXER STAINLESS STEEL\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-bandera single screw extruder 45 mm 20 l / d

construction year 1996
for plasticized pvc
thermoregulation unit included BANDERA SINGLE SCREW EXTRUDER 45 MM 20 L / D CONSTRUCTION YEAR 1996 FOR PLASTICIZED PVC THERMOREGULATION UNIT INCLUDED
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-manufacturer: wemhöner, year: 1997, type: mebranenpresse, control: siemens, number of tables: 2, automatisches rüsten: no, pin-sytem: no, heating system: thermoil, work piece width min-max mm: 1300, min.-max. workpiece length in mm: 3200, work piece thickness max mm: 10-50, placing table: 2, through running machine: yes, pressing cylinder: 5, multifunktionsrahmen: yes, landing opening mm: 220, piston diameter: ca.180, steel plate top: yes, längsdurchlauf: yes, automatische entleerung: yes, folienschneidmaschine hersteller: yes, bürstenmaschine hersteller: no, folienkalander: 16 rollen, foil cutter: 2, through running machine: yes, free text: inkl. thermoiol kessel 90 kw/inkl. folienpresse, year :1997 MANUFACTURER: WEMHöNER, YEAR: 1997, TYPE: MEBRANENPRESSE, CONTROL: SIEMENS, NUMBER OF TABLES: 2, AUTOMATISCHES RüSTEN: NO, PIN-SYTEM: NO, HEATING SYSTEM: THERMOIL, WORK PIECE WIDTH MIN-MAX MM: 1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 3200, WORK PIECE THICKNESS MAX MM: 10-50, PLACING TABLE: 2, THROUGH RUNNING MACHINE: YES, PRESSING CYLINDER: 5, MULTIFUNKTIONSRAHMEN: YES, LANDING OPENING MM: 220, PISTON DIAMETER: CA.180, STEEL PLATE TOP: YES, LäNGSDURCHLAUF: YES, AUTOMATISCHE ENTLEERUNG: YES, FOLIENSCHNEIDMASCHINE HERSTELLER: YES, BüRSTENMASCHINE HERSTELLER: NO, FOLIENKALANDER: 16 ROLLEN, FOIL CUTTER: 2, THROUGH RUNNING MACHINE: YES, FREE TEXT: INKL. THERMOIOL KESSEL 90 KW/INKL. FOLIENPRESSE, YEAR :1997
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Precio: 345.000 PLN
Ubicación: Land-vertical packing machine hsv 101 s flexible
along with the conveyor can be compensated with dildo decentralized drive and flexible control of the machine is welding torch system
the device is completely decentralised structure drive
a wide range of packaging and bulk products easy control and programming
a wide range of optional equipment easy replacement of the tube with flange by means of clamps quick change clamping units effectively set the cut as a sign of low energy consumption
100 memory settings automatic centring film
self diagnostics
a wide range of moulding packaging system easy to connect film
materials combined hot such as pp, paper, pe, etc. 
thermoplastic materials such as pe foil, etc. 
the efficiency of the machine depends on the product to be packaged, packaging material, packaging size and type of measuring device the year of manufacture: 2000

14 head nawa?arka-weight multipond mp 1401-c
 
universal high-precision dispenser multi-head considerations all kinds of bulk products and granulates, for example, such as pasta, candy, nuts, seeds, spices, coffee, cakes, chocolate, frozen food, fr plate, sugar, semolina, bread crumbs, milk, chemical products, semi-finished products, etc.
to 450 odwa?e? per minute in combination mode
 to 540 odwa?e? per minute in the metering mode
 portion weight for an individual throw: up to 500 g
 the possible greater weight in large servings or multiple shot
 maximum accuracy
 fully automatic calibration and tare
 product-specific accessories
 compact water and dust-resistant design
 application: combination, mixing, counting, dosing
maximum accuracy and working time guaranteed by high resolution temperature compensating strain gauges with kalibruj?cymi scales of our implementation. calibration is done automatically according to the preset time intervals while the machine is in operation.
double-open flip flops designed for fast and clean, which is especially beneficial when the difficult and highly viscous products.

all parts contacting with the product are available in many materials such as profiled or smooth plastic or metal to work with different products. these parts are interchangeable and can be removed quickly and easily without the use of tools to clean, change the product or service. 

intelligent automatic control administration eliminates the need for matching machine for the product by the operator. each radial feeder is automatically optimized in order to obtain the highest efficiency of weighting based on the flow of the product.

year of manufacture: 2000
  VERTICAL PACKING MACHINE HSV 101 S FLEXIBLE ALONG WITH THE CONVEYOR CAN BE COMPENSATED WITH DILDO DECENTRALIZED DRIVE AND FLEXIBLE CONTROL OF THE MACHINE IS WELDING TORCH SYSTEM THE DEVICE IS COMPLETELY DECENTRALISED STRUCTURE DRIVE A WIDE RANGE OF PACKAGING AND BULK PRODUCTS EASY CONTROL AND PROGRAMMING A WIDE RANGE OF OPTIONAL EQUIPMENT EASY REPLACEMENT OF THE TUBE WITH FLANGE BY MEANS OF CLAMPS QUICK CHANGE CLAMPING UNITS EFFECTIVELY SET THE CUT AS A SIGN OF LOW ENERGY CONSUMPTION 100 MEMORY SETTINGS AUTOMATIC CENTRING FILM SELF DIAGNOSTICS A WIDE RANGE OF MOULDING PACKAGING SYSTEM EASY TO CONNECT FILM MATERIALS COMBINED HOT SUCH AS PP, PAPER, PE, ETC. THERMOPLASTIC MATERIALS SUCH AS PE FOIL, ETC. THE EFFICIENCY OF THE MACHINE DEPENDS ON THE PRODUCT TO BE PACKAGED, PACKAGING MATERIAL, PACKAGING SIZE AND TYPE OF MEASURING DEVICE THE YEAR OF MANUFACTURE: 2000 14 HEAD NAWA?ARKA-WEIGHT MULTIPOND MP 1401-C UNIVERSAL HIGH-PRECISION DISPENSER MULTI-HEAD CONSIDERATIONS ALL KINDS OF BULK PRODUCTS AND GRANULATES, FOR EXAMPLE, SUCH AS PASTA, CANDY, NUTS, SEEDS, SPICES, COFFEE, CAKES, CHOCOLATE, FROZEN FOOD, FR PLATE, SUGAR, SEMOLINA, BREAD CRUMBS, MILK, CHEMICAL PRODUCTS, SEMI-FINISHED PRODUCTS, ETC. TO 450 ODWA?E? PER MINUTE IN COMBINATION MODE TO 540 ODWA?E? PER MINUTE IN THE METERING MODE PORTION WEIGHT FOR AN INDIVIDUAL THROW: UP TO 500 G THE POSSIBLE GREATER WEIGHT IN LARGE SERVINGS OR MULTIPLE SHOT MAXIMUM ACCURACY FULLY AUTOMATIC CALIBRATION AND TARE PRODUCT-SPECIFIC ACCESSORIES COMPACT WATER AND DUST-RESISTANT DESIGN APPLICATION: COMBINATION, MIXING, COUNTING, DOSING MAXIMUM ACCURACY AND WORKING TIME GUARANTEED BY HIGH RESOLUTION TEMPERATURE COMPENSATING STRAIN GAUGES WITH KALIBRUJ?CYMI SCALES OF OUR IMPLEMENTATION. CALIBRATION IS DONE AUTOMATICALLY ACCORDING TO THE PRESET TIME INTERVALS WHILE THE MACHINE IS IN OPERATION. DOUBLE-OPEN FLIP FLOPS DESIGNED FOR FAST AND CLEAN, WHICH IS ESPECIALLY BENEFICIAL WHEN THE DIFFICULT AND HIGHLY VISCOUS PRODUCTS. ALL PARTS CONTACTING WITH THE PRODUCT ARE AVAILABLE IN MANY MATERIALS SUCH AS PROFILED OR SMOOTH PLASTIC OR METAL TO WORK WITH DIFFERENT PRODUCTS. THESE PARTS ARE INTERCHANGEABLE AND CAN BE REMOVED QUICKLY AND EASILY WITHOUT THE USE OF TOOLS TO CLEAN, CHANGE THE PRODUCT OR SERVICE. INTELLIGENT AUTOMATIC CONTROL ADMINISTRATION ELIMINATES THE NEED FOR MATCHING MACHINE FOR THE PRODUCT BY THE OPERATOR. EACH RADIAL FEEDER IS AUTOMATICALLY OPTIMIZED IN ORDER TO OBTAIN THE HIGHEST EFFICIENCY OF WEIGHTING BASED ON THE FLOW OF THE PRODUCT. YEAR OF MANUFACTURE: 2000
Vendedor: Tiger Job Sp. z o.o.
Año de construcción: usado
Precio: 159.000 €
Ubicación: Land-multifoiler press\r\nbrand: bürkle \r\ntype: btf 1528-1400 flowline\r\nyear: 2007\r\n\r\nwith paternoster\r\n\r\nhigh-performance system for the membrane-free thermoforming of smooth and shaped mdf parts with thermoplastic foils.\r\n\r\ntechnical data:\r\n\r\n1. surface material:\r\nfrom the roll, or as a blank cut \r\na) pvc foil 0.30 - 1.0 mm\r\nb) high gloss foil 0,50 - 1,0 mm\r\nc) pet foil 0.35 - 0.6 mm\r\nall foils suitable for the bürkle thermoform process.\r\n\r\n2. carrier material:\r\nmdf board, with smooth profiled surfaces.\r\nthickness tolerance +/- 0.15 mm\r\n\r\n3. adhesives:\r\ndispersion adhesive 80 - 150 g / m²\r\nfor foils, 1-component or 2-component polyurethane adhesive.\r\n\r\ntechnology\r\n\r\nthermoform coating, without membrane, 1400 mm foil\r\neffective area 1330 x 2630 mm\r\nmax. work piece size 1250 x 2550 mm\r\nmin. foil width 1400 mm\r\nsealing dimensions 1370 m (u.u 1360 mm)\r\nwork piece thickness 16 - 38 mm\r\n\r\nworkflow on the entire flowline:\r\n1. positioning of the work piece on the same tray.\r\n2. detecting the work peice positions using a digital camera.\r\n3. cover with foil from the foil paternoster.\r\n4. load the laying pallet into the multifoiler.\r\n5. placing the sheet in the multipin system within the press while entering the press.\r\n6. process of coating without membrane in the process chamber of the multifoilers.\r\npreheat the foil, vacuum and shape with shaping pressure to max. 6 bar.\r\n7. discharge the entire batch into the rotary turner / multiturning.\r\n8. turn the laying pallet with the work piece around the longitudinal axis.\r\n9. discharge of the work pieces on a conveyor belt and transport from the turner.\r\n10. direct, manual cutting with finished cut (trimming) on the conveyor belt.\r\nalternative:\r\n20 cycles per hour, with commercially available foils.\r\nglossy foils have a longer cycle time due to longer warm-up times.\r\n\r\nimplementation of plants\r\n\r\npos. 10 1 receiving and loading station\r\n\r\npos. 20 1 bürkle - multifolier model btf 1528\r\ntechnical data:\r\nhotplate size: 1500 x 2800 mm\r\nloading side: 1500 mm\r\nmax. heating temperature 140 ° c\r\noperating side: right\r\n\r\nlifting, lowering and locking the press table with hydraulic.\r\n\r\n1 upper sealing frame, 15 mm\r\nattached to upper heating plate with quick clamping system.\r\n\r\n1 vacuum device\r\nwith vacuum pump and reservoir.\r\n\r\npos. 21 1 chain conveyor\r\ndriven, reversible, frequency controlled, in the press.\r\n\r\npos. 22 1 chain conveyor\r\ndriven, frequency controlled, under the press\r\n\r\npos. 23 3 lay pallets\r\n\r\npos. 25 1 bürkle multi-pin system\r\nfully automatic sub-system for the membraneless coating of milled mdf parts.\r\n\r\nfunction:\r\n1. the workpieces are placed as before in the laying pallet with the usual distances, but without sub-parts.\r\n2. an lcd matrix camera captures the image and stores it digitally with a very fine resolution of approx. 2 x 2 mm.\r\n3. a special software calculates the respective pins matching the image and initiates the setting of the pins in the btf.\r\n4. the round pins are located in a maintenance-friendly, solid metal block inside the multifoilers.\r\n5. the new laying pattern is set immediately after leaving the laying pallet, or during the new loading of the btf time-saving.\r\n6. the occupied pallet inverts over the finished set sheet and the coating process can begin as known.\r\n\r\npos. 30 1 bürkle multi-turning\r\nautomatic turning station for foil-coated work piece batches with integrated lifting device.\r\nfunction:\r\nthe full laying pallet travels from the btf to the rotary turner after coating. a conveyor belt lowers and clamps the entire batch with the pallet. the entire installation revolves around 180 degrees.\r\n\r\npos. 31 1 piece belt transport\r\n\r\npos. 61 1 foil discharger / discharging\r\nfor unloading the foils during static charges.\r\nto avoid foil contamination\r\nsuitable for 1 foil unwinding station\r\n\r\npos. 10 a paternoster\r\nfor 23 rolls (Ø 400 mm)\r\nproduct width: 1600 mm\r\nconstruction height: 5400 mm\r\noverall width: 2370 mm\r\nincl. 1 piece roll transport\r\n\r\nnote:\r\nthe specifications and descriptions are a copy of the order confirmation at that time. datas are for information and are not binding. MULTIFOILER PRESS\R\NBRAND: BüRKLE \R\NTYPE: BTF 1528-1400 FLOWLINE\R\NYEAR: 2007\R\N\R\NWITH PATERNOSTER\R\N\R\NHIGH-PERFORMANCE SYSTEM FOR THE MEMBRANE-FREE THERMOFORMING OF SMOOTH AND SHAPED MDF PARTS WITH THERMOPLASTIC FOILS.\R\N\R\NTECHNICAL DATA:\R\N\R\N1. SURFACE MATERIAL:\R\NFROM THE ROLL, OR AS A BLANK CUT \R\NA) PVC FOIL 0.30 - 1.0 MM\R\NB) HIGH GLOSS FOIL 0,50 - 1,0 MM\R\NC) PET FOIL 0.35 - 0.6 MM\R\NALL FOILS SUITABLE FOR THE BüRKLE THERMOFORM PROCESS.\R\N\R\N2. CARRIER MATERIAL:\R\NMDF BOARD, WITH SMOOTH PROFILED SURFACES.\R\NTHICKNESS TOLERANCE +/- 0.15 MM\R\N\R\N3. ADHESIVES:\R\NDISPERSION ADHESIVE 80 - 150 G / M²\R\NFOR FOILS, 1-COMPONENT OR 2-COMPONENT POLYURETHANE ADHESIVE.\R\N\R\NTECHNOLOGY\R\N\R\NTHERMOFORM COATING, WITHOUT MEMBRANE, 1400 MM FOIL\R\NEFFECTIVE AREA 1330 X 2630 MM\R\NMAX. WORK PIECE SIZE 1250 X 2550 MM\R\NMIN. FOIL WIDTH 1400 MM\R\NSEALING DIMENSIONS 1370 M (U.U 1360 MM)\R\NWORK PIECE THICKNESS 16 - 38 MM\R\N\R\NWORKFLOW ON THE ENTIRE FLOWLINE:\R\N1. POSITIONING OF THE WORK PIECE ON THE SAME TRAY.\R\N2. DETECTING THE WORK PEICE POSITIONS USING A DIGITAL CAMERA.\R\N3. COVER WITH FOIL FROM THE FOIL PATERNOSTER.\R\N4. LOAD THE LAYING PALLET INTO THE MULTIFOILER.\R\N5. PLACING THE SHEET IN THE MULTIPIN SYSTEM WITHIN THE PRESS WHILE ENTERING THE PRESS.\R\N6. PROCESS OF COATING WITHOUT MEMBRANE IN THE PROCESS CHAMBER OF THE MULTIFOILERS.\R\NPREHEAT THE FOIL, VACUUM AND SHAPE WITH SHAPING PRESSURE TO MAX. 6 BAR.\R\N7. DISCHARGE THE ENTIRE BATCH INTO THE ROTARY TURNER / MULTITURNING.\R\N8. TURN THE LAYING PALLET WITH THE WORK PIECE AROUND THE LONGITUDINAL AXIS.\R\N9. DISCHARGE OF THE WORK PIECES ON A CONVEYOR BELT AND TRANSPORT FROM THE TURNER.\R\N10. DIRECT, MANUAL CUTTING WITH FINISHED CUT (TRIMMING) ON THE CONVEYOR BELT.\R\NALTERNATIVE:\R\N20 CYCLES PER HOUR, WITH COMMERCIALLY AVAILABLE FOILS.\R\NGLOSSY FOILS HAVE A LONGER CYCLE TIME DUE TO LONGER WARM-UP TIMES.\R\N\R\NIMPLEMENTATION OF PLANTS\R\N\R\NPOS. 10 1 RECEIVING AND LOADING STATION\R\N\R\NPOS. 20 1 BüRKLE - MULTIFOLIER MODEL BTF 1528\R\NTECHNICAL DATA:\R\NHOTPLATE SIZE: 1500 X 2800 MM\R\NLOADING SIDE: 1500 MM\R\NMAX. HEATING TEMPERATURE 140 ° C\R\NOPERATING SIDE: RIGHT\R\N\R\NLIFTING, LOWERING AND LOCKING THE PRESS TABLE WITH HYDRAULIC.\R\N\R\N1 UPPER SEALING FRAME, 15 MM\R\NATTACHED TO UPPER HEATING PLATE WITH QUICK CLAMPING SYSTEM.\R\N\R\N1 VACUUM DEVICE\R\NWITH VACUUM PUMP AND RESERVOIR.\R\N\R\NPOS. 21 1 CHAIN CONVEYOR\R\NDRIVEN, REVERSIBLE, FREQUENCY CONTROLLED, IN THE PRESS.\R\N\R\NPOS. 22 1 CHAIN CONVEYOR\R\NDRIVEN, FREQUENCY CONTROLLED, UNDER THE PRESS\R\N\R\NPOS. 23 3 LAY PALLETS\R\N\R\NPOS. 25 1 BüRKLE MULTI-PIN SYSTEM\R\NFULLY AUTOMATIC SUB-SYSTEM FOR THE MEMBRANELESS COATING OF MILLED MDF PARTS.\R\N\R\NFUNCTION:\R\N1. THE WORKPIECES ARE PLACED AS BEFORE IN THE LAYING PALLET WITH THE USUAL DISTANCES, BUT WITHOUT SUB-PARTS.\R\N2. AN LCD MATRIX CAMERA CAPTURES THE IMAGE AND STORES IT DIGITALLY WITH A VERY FINE RESOLUTION OF APPROX. 2 X 2 MM.\R\N3. A SPECIAL SOFTWARE CALCULATES THE RESPECTIVE PINS MATCHING THE IMAGE AND INITIATES THE SETTING OF THE PINS IN THE BTF.\R\N4. THE ROUND PINS ARE LOCATED IN A MAINTENANCE-FRIENDLY, SOLID METAL BLOCK INSIDE THE MULTIFOILERS.\R\N5. THE NEW LAYING PATTERN IS SET IMMEDIATELY AFTER LEAVING THE LAYING PALLET, OR DURING THE NEW LOADING OF THE BTF TIME-SAVING.\R\N6. THE OCCUPIED PALLET INVERTS OVER THE FINISHED SET SHEET AND THE COATING PROCESS CAN BEGIN AS KNOWN.\R\N\R\NPOS. 30 1 BüRKLE MULTI-TURNING\R\NAUTOMATIC TURNING STATION FOR FOIL-COATED WORK PIECE BATCHES WITH INTEGRATED LIFTING DEVICE.\R\NFUNCTION:\R\NTHE FULL LAYING PALLET TRAVELS FROM THE BTF TO THE ROTARY TURNER AFTER COATING. A CONVEYOR BELT LOWERS AND CLAMPS THE ENTIRE BATCH WITH THE PALLET. THE ENTIRE INSTALLATION REVOLVES AROUND 180 DEGREES.\R\N\R\NPOS. 31 1 PIECE BELT TRANSPORT\R\N\R\NPOS. 61 1 FOIL DISCHARGER / DISCHARGING\R\NFOR UNLOADING THE FOILS DURING STATIC CHARGES.\R\NTO AVOID FOIL CONTAMINATION\R\NSUITABLE FOR 1 FOIL UNWINDING STATION\R\N\R\NPOS. 10 A PATERNOSTER\R\NFOR 23 ROLLS (Ø 400 MM)\R\NPRODUCT WIDTH: 1600 MM\R\NCONSTRUCTION HEIGHT: 5400 MM\R\NOVERALL WIDTH: 2370 MM\R\NINCL. 1 PIECE ROLL TRANSPORT\R\N\R\NNOTE:\R\NTHE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATAS ARE FOR INFORMATION AND ARE NOT BINDING.
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 30.750 PLN
Ubicación: Land-natural gas boiler 2900kw for thermal oil babcock wanson
thermal fluid heater
babcock wanson thermopac 2500 sc
power output of 2900 kw (according to)
output power 2908 kw = 2500 kcal/h x 1000 (according to the)
the year 1994
contents of fluid 1188 litre (catalogue)
fuel-natural gas 300 mbar
3faz. 380v,
reliable and easy to use • boiler type of tpc-b babcock wanson consists of vertical wieloci?gowej furnace chamber, refined through the years in terms of both design and construction. the solution with the facing down flame burner, you can use the free expansion of the coil during operation, eliminating the formation of thermal stress. • integral, cooled from the inside air boiler casing tpc-b, yet perfectly isolates the outer portion of the device from high temperature exhaust, as well as shall constitute the initial combustion air heater/economizer. this type of construction ensures safer operation and longer service life of the device. • the boiler has a fully integrated and tested at the factory process control system, making it much easier to assemble.
more info:
abc://abc.babcock-wanson.pl/resources/fichiers/bw_pl/brochures/tpc-b_kociol_na_olej_termalny.pdf
abc://pdfs.findtheneedle.co.uk/8233-gk-2008-d-gb-nl.pdf
product used
net price £ 25000.00
gross price 30750.00 z?
product code: 6612 NATURAL GAS BOILER 2900KW FOR THERMAL OIL BABCOCK WANSON THERMAL FLUID HEATER BABCOCK WANSON THERMOPAC 2500 SC POWER OUTPUT OF 2900 KW (ACCORDING TO) OUTPUT POWER 2908 KW = 2500 KCAL/H X 1000 (ACCORDING TO THE) THE YEAR 1994 CONTENTS OF FLUID 1188 LITRE (CATALOGUE) FUEL-NATURAL GAS 300 MBAR 3FAZ. 380V, RELIABLE AND EASY TO USE • BOILER TYPE OF TPC-B BABCOCK WANSON CONSISTS OF VERTICAL WIELOCI?GOWEJ FURNACE CHAMBER, REFINED THROUGH THE YEARS IN TERMS OF BOTH DESIGN AND CONSTRUCTION. THE SOLUTION WITH THE FACING DOWN FLAME BURNER, YOU CAN USE THE FREE EXPANSION OF THE COIL DURING OPERATION, ELIMINATING THE FORMATION OF THERMAL STRESS. • INTEGRAL, COOLED FROM THE INSIDE AIR BOILER CASING TPC-B, YET PERFECTLY ISOLATES THE OUTER PORTION OF THE DEVICE FROM HIGH TEMPERATURE EXHAUST, AS WELL AS SHALL CONSTITUTE THE INITIAL COMBUSTION AIR HEATER/ECONOMIZER. THIS TYPE OF CONSTRUCTION ENSURES SAFER OPERATION AND LONGER SERVICE LIFE OF THE DEVICE. • THE BOILER HAS A FULLY INTEGRATED AND TESTED AT THE FACTORY PROCESS CONTROL SYSTEM, MAKING IT MUCH EASIER TO ASSEMBLE. MORE INFO: ABC://ABC.BABCOCK-WANSON.PL/RESOURCES/FICHIERS/BW_PL/BROCHURES/TPC-B_KOCIOL_NA_OLEJ_TERMALNY.PDF ABC://PDFS.FINDTHENEEDLE.CO.UK/8233-GK-2008-D-GB-NL.PDF PRODUCT USED NET PRICE £ 25000.00 GROSS PRICE 30750.00 Z? PRODUCT CODE: 6612
Vendedor: Aman Janusz Mlynarczyk
Año de construcción: usado
Precio: 420 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 1.450 €
Ubicación: Land-solidbase 680-10 bm

belt-driven, more robust, stationary piston compressor for the demanding users of workshop.

the compressor pumps in two-stage versions are durable due to the low speed, the generous use of materials and the mature mass production and economical.

the compressor unit is manufactured in accordance with directive 2009/105/ec,
with ce sign.

furthermore, the aggregate with a condor is equipped control pressure switch, as well as a non-return valve and elastic support. 

the supply is carried out by the customer.

even a cyclone separator z20n and an automatic condensate drain for a building-side container type bekomat 32 is included

little run. top condition.

solidair. a brand boge group SOLIDBASE 680-10 BM BELT-DRIVEN, MORE ROBUST, STATIONARY PISTON COMPRESSOR FOR THE DEMANDING USERS OF WORKSHOP. THE COMPRESSOR PUMPS IN TWO-STAGE VERSIONS ARE DURABLE DUE TO THE LOW SPEED, THE GENEROUS USE OF MATERIALS AND THE MATURE MASS PRODUCTION AND ECONOMICAL. THE COMPRESSOR UNIT IS MANUFACTURED IN ACCORDANCE WITH DIRECTIVE 2009/105/EC, WITH CE SIGN. FURTHERMORE, THE AGGREGATE WITH A CONDOR IS EQUIPPED CONTROL PRESSURE SWITCH, AS WELL AS A NON-RETURN VALVE AND ELASTIC SUPPORT. THE SUPPLY IS CARRIED OUT BY THE CUSTOMER. EVEN A CYCLONE SEPARATOR Z20N AND AN AUTOMATIC CONDENSATE DRAIN FOR A BUILDING-SIDE CONTAINER TYPE BEKOMAT 32 IS INCLUDED LITTLE RUN. TOP CONDITION. SOLIDAIR. A BRAND BOGE GROUP
Vendedor: BOGE KOMPRESSOREN Otto Boge GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 390 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 700 x 650 x 1700 mm<br/>description: power supply: wood, with water circulation pump, oil burner, thermostat WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 700 X 650 X 1700 MM
DESCRIPTION: POWER SUPPLY: WOOD, WITH WATER CIRCULATION PUMP, OIL BURNER, THERMOSTAT
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-formats: 3.1, 4.1, 5.1, top/ bottom web width: 456/ 462mm, output: 500-600kg/h, length: 9000mm, width: 900mm, operational hours: ca. 25.000h, without accessories.  FORMATS: 3.1, 4.1, 5.1, TOP/ BOTTOM WEB WIDTH: 456/ 462MM, OUTPUT: 500-600KG/H, LENGTH: 9000MM, WIDTH: 900MM, OPERATIONAL HOURS: CA. 25.000H, WITHOUT ACCESSORIES.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 1.500 €
Ubicación: Land-weight approx.: 500 kg<br/>dimensions (l x w x h) approx.: 3200 x 1800 x 2300 mm<br/>description: energy efficiency bench for thermos and tank cilinders WEIGHT APPROX.: 500 KG
DIMENSIONS (L X W X H) APPROX.: 3200 X 1800 X 2300 MM
DESCRIPTION: ENERGY EFFICIENCY BENCH FOR THERMOS AND TANK CILINDERS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: orma, type: lcc 53-14, year: 2011, heizplattenmasse ca.mm: 5300 x 1400, anzahl der etagen: 1, zylinderhub mm: 150, temperatur min-max: 130, heated by: warmwasser oder thermoöl, gesamtdruck kn: 650 tonnen, spezifischer druck: 11, rueckzylinder n/cm2: 4 x 65 mm, anzahl der presszylinder: 12, longitudinal through running press: yes, press length mm: 5300, pressing width mm: 1400, inlet conveyor: yes, year :2011 MANUFACTURER: ORMA, TYPE: LCC 53-14, YEAR: 2011, HEIZPLATTENMASSE CA.MM: 5300 X 1400, ANZAHL DER ETAGEN: 1, ZYLINDERHUB MM: 150, TEMPERATUR MIN-MAX: 130, HEATED BY: WARMWASSER ODER THERMOöL, GESAMTDRUCK KN: 650 TONNEN, SPEZIFISCHER DRUCK: 11, RUECKZYLINDER N/CM2: 4 X 65 MM, ANZAHL DER PRESSZYLINDER: 12, LONGITUDINAL THROUGH RUNNING PRESS: YES, PRESS LENGTH MM: 5300, PRESSING WIDTH MM: 1400, INLET CONVEYOR: YES, YEAR :2011
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-shrink wrapper tunnel
 SHRINK WRAPPER TUNNEL
Vendedor: Koneikko Oy
Año de construcción: usado
Ubicación: Land-closed stirring vessel, extra specifications 101 l agitated glass vessel with 3 level stainless steel agitator and drive, thermometerstirring vesselsstirring vessels > stirring vessels what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! CLOSED STIRRING VESSEL, EXTRA SPECIFICATIONS 101 L AGITATED GLASS VESSEL WITH 3 LEVEL STAINLESS STEEL AGITATOR AND DRIVE, THERMOMETERSTIRRING VESSELSSTIRRING VESSELS > STIRRING VESSELS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-temperature control device for candy melts
model: thermo-quick duo
with 2 removable bowls
double wall version with thermo oil-filling
for 6 kg capacity each
regulation thermostat (70 â° c)
each dish separately heated
230 v, 700 watts
dimensions: 760 x 410 x 240 mm wxdxh
used unit cleaned and checked
with warranty! TEMPERATURE CONTROL DEVICE FOR CANDY MELTS MODEL: THERMO-QUICK DUO WITH 2 REMOVABLE BOWLS DOUBLE WALL VERSION WITH THERMO OIL-FILLING FOR 6 KG CAPACITY EACH REGULATION THERMOSTAT (70 &ACIRC;&DEG; C) EACH DISH SEPARATELY HEATED 230 V, 700 WATTS DIMENSIONS: 760 X 410 X 240 MM WXDXH USED UNIT CLEANED AND CHECKED WITH WARRANTY!
Vendedor: Milbrandt GmbH
Año de construcción: usado
Ubicación: Land-temperating machine, make thermo haake gmbh ( d ), type 011-0028/ b7, extra specifications haake wasserbad b7 mit thermostat, ip 30 , ce certified, sn 1200303923008thermal fluid unitsheat exchangers > thermal fluid units what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! TEMPERATING MACHINE, MAKE THERMO HAAKE GMBH ( D ), TYPE 011-0028/ B7, EXTRA SPECIFICATIONS HAAKE WASSERBAD B7 MIT THERMOSTAT, IP 30 , CE CERTIFIED, SN 1200303923008THERMAL FLUID UNITSHEAT EXCHANGERS > THERMAL FLUID UNITS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-composed of: 
3 piece daub rack ovens type rdto-sx 
year of construction 1996 
1 piece daub deck oven 
year of construction 1988
parchim tandem boiler plant (2 units) type pko 300 
year of construction 2013 
with gas burners 
parchim expansion vessel 800 l 
htt heat recovery type wro 300 d.v. 
2 piece daub proofer

the system is ex location for self-dismantling available! 

 COMPOSED OF: 3 PIECE DAUB RACK OVENS TYPE RDTO-SX YEAR OF CONSTRUCTION 1996 1 PIECE DAUB DECK OVEN YEAR OF CONSTRUCTION 1988 PARCHIM TANDEM BOILER PLANT (2 UNITS) TYPE PKO 300 YEAR OF CONSTRUCTION 2013 WITH GAS BURNERS PARCHIM EXPANSION VESSEL 800 L HTT HEAT RECOVERY TYPE WRO 300 D.V. 2 PIECE DAUB PROOFER THE SYSTEM IS EX LOCATION FOR SELF-DISMANTLING AVAILABLE!
Vendedor: Bakers Good GmbH & Co. KG
Año de construcción: usado
Precio: 54.500 €
Ubicación: Land-einseitige kantenanleimmaschine\r\nfabrikat: biesse\r\ntyp: stream b1/8.5\r\nbaujahr: 2007\r\n\r\nmit werkstückrückführung\r\n\r\nstandard ausrüstung grundmaschine\r\n- riemenoberdruck mit doppel- v -profil\r\n- elektronische höheneinstellung des oberdrucks\r\n- inverter für die vorschubkettengeschwindigkeit\r\n- eigener inverter für jedes aggregat\r\n- pc benutzeroberfläche windows xp\r\n- statistik-software mit exportmöglichkeit in excel\r\n- unbegrenzte log-dateien \r\n- absaugvorrichtung eingebaut im maschinenbett\r\n\r\nwerkstückauflage\r\nin der breite verstellbare hilfsauflage bestehend aus einem aluminiumprofil mit nicht angetriebenen rollen.\r\n\r\nnc-steuerung\r\n\r\neigenschaften\r\n- betriebssystem windows xp professionell\r\n- sintra maschinensteuerung mit windows xp oberfläche\r\n- positionierung der achsen (maschine rüsten)\r\n- elektronische verstellung der vorschubgeschwindigkeit\r\n- elektronische verstellung des oberdrucks\r\n\r\nfügefräsaggregat\r\nfräsaggregat bestehend aus 2 gegenläufigen fräser mit vertikaler achse.\r\n- drehzahl werkzeug min. 9.000 u/min\r\n- motorleistung min. 3,5 + 3,5 kw\r\n- welle (d. x länge) min. 30 x 50 mm\r\nnc-gesteuerter tastschuh am ersten motor um die stärke des abtrages automatisch verstellen zu können\r\n\r\ninfrarotheizlampe\r\n2 infrarotheizlampen, eine oben eine unten zur vorwärmung der werkstückkante die angeleimt wird.\r\n\r\nleimauftragsstation\r\nanleimstation für gerade kanten aus melaminharz, abs, pvc, pp, furnier\r\nmit thermoplastischen eva- klebstoffen\r\n- patentiertes high- melt system, leimwalze und leimschale getrennt\r\n- schnellwechselsystem der leimschale durch einfaches heraus-schwenken aus dem aggregat\r\n- leimwalze und schale komplett teflonbeschichtet\r\n- leimmengendosierung einfach einstellbar\r\n- elektronische synchronlauf der leimwalze mit plattenvorschub\r\n- granulatbehälter mit schleuse direkt an der aufschmelzeinheit\r\n- kantenüberwachung mittels fotozelle\r\n- automatische kantenwechsel nc-gesteuert\r\ndruckzone:\r\n- 1 angetriebene rolle d= 150 mm\r\n- 3 freilaufende rollen d= 65 mm\r\n\r\ntechnische daten:\r\n- kantenstärke min. 0,3 mm max. 3 mm\r\n- kantenquerschnitt kappschere min. 135\r\n- werkstückstärke min. 10 mm max. 60 mm\r\n- kantenhöhe min. 15 mm max. 65 mm\r\n- minimale kantenlänge min. 150 mm\r\n\r\nnc y-achse für druckzone\r\ndie verstellung der druckzone erfolgt motorisiert und wird über die steuerung eingestellt.\r\n\r\nz-achse für kantenzuführung\r\nautomatische höhenverstellung der kantenzuführung, in position zur angetriebenen andruckrolle.\r\n\r\nzwölffach kantenmagazin\r\nkantenmagazin für 12 rollenkanten\r\ndie kantenrollen werden vertikal in das magazin hineingestellt und über eine fotozelle wird das ende der rolle überwacht.\r\ndie auswahl der kante erfolgt von der steuerung und bei hinterlegung des gleichen kantentype wird automatisch beim ende der rolle auf die andere gewechselt.\r\n\r\nkappaggregat it90-s\r\nkappagggregat, komplett mit 2 motoren für anleimstärken bis 3 mm.\r\nneigung der motoren an der vertikalachse von 0° auf 25° mit automatischer schwenkung.\r\n\r\ntechnische daten:\r\n- drehzahl min. 12.000 rqm\r\n- motorleistung min. 0,3 + 0,3 kw\r\n- vorschubgeschwindigkeit min. 28 mt/min\r\n- kantendicke min. 0,3 mm max. 3 mm\r\n- werkstückdicke min. 10 mm max. 60 mm\r\n\r\ntastschuh mit 3 positionen für kappaggregat it90\r\n3 unabhängig voneinander einstellbare anschläge pro sägewagen zum verstellen des y-tastschuhes.\r\ndie auswahl des anschlages erfolgt elektropneumatisch und wird vom pc aus gesteuert.\r\n\r\nvorfräsaggregat rs10\r\ndas aggregat ist mit zwei übereinander angeordneten motoren ausgestattet.\r\nbeide motoren sind mit vertikalen tastrollen ausgestattet.\r\n\r\ntechnische daten:\r\n- drehzahl min. 12.000 u/min.\r\n- motorlesitung 1,3 + 1,3 kw\r\n\r\nfeinfräsaggregat rf40 - fase 25°\r\njeder motor ist komplett mit horizontalem und vertikalem taster und auf schlitten schwenkbar.\r\n\r\ntechnische daten:\r\n- drehzahl min. 12.000 u/min.\r\n- motorleistung 0,65 + 0,65 kw\r\n\r\nmultifunktionsfräsaggregat ar30\r\nfür feinfräsen und eckenkopieren an werkstücken mit (abs/pvc/pp) kanten bis 3 mm stärke.\r\neckenkopieren ist an geraden sowie an profilierten kanten als auch an soft- und postformingplatten 90° und 180° werkstücke.\r\nfeinfräsen in hoher qualität\r\n\r\nautomatisches umrüsten von dünn- auf dickkante\r\nes ist möglich das aggregat vom bedienpult aus automatisch von dünnkante (0,4 mm) auf dickkante (3,0 mm) umzustellen.\r\n\r\ntechnische daten:\r\n- drehzahl min. 12.000 u/min.\r\n- motorleistung 0,35 + 0,35 kw\r\n- vorschubgeschwindigkeit max. 18 m/min.\r\n- kantenstärke min. 0,3 mm max. 3 mm\r\n\r\n4 pneumatische festpunkte für seitentaster ar30\r\nnc gesteuerte festpunkte zum verstellen des seitentasters zum bearbeiten von 3 dünnkanten und 2 dickkanten\r\n\r\nautomatisches werkzeugwechselmagazin \r\nautomatischen werkzeugwechsel mit einem 5-fach magazin\r\n\r\nprofilziehklingenaggregat rb40\r\nzur nachbearbeitung für abs/pvc/pp kanten.\r\nenthält eine obere und eine untere einheit mit vertikalen und horizontalen kopierscheiben.\r\nautomatis EINSEITIGE KANTENANLEIMMASCHINE\R\NFABRIKAT: BIESSE\R\NTYP: STREAM B1/8.5\R\NBAUJAHR: 2007\R\N\R\NMIT WERKSTüCKRüCKFüHRUNG\R\N\R\NSTANDARD AUSRüSTUNG GRUNDMASCHINE\R\N- RIEMENOBERDRUCK MIT DOPPEL- V -PROFIL\R\N- ELEKTRONISCHE HöHENEINSTELLUNG DES OBERDRUCKS\R\N- INVERTER FüR DIE VORSCHUBKETTENGESCHWINDIGKEIT\R\N- EIGENER INVERTER FüR JEDES AGGREGAT\R\N- PC BENUTZEROBERFLäCHE WINDOWS XP\R\N- STATISTIK-SOFTWARE MIT EXPORTMöGLICHKEIT IN EXCEL\R\N- UNBEGRENZTE LOG-DATEIEN \R\N- ABSAUGVORRICHTUNG EINGEBAUT IM MASCHINENBETT\R\N\R\NWERKSTüCKAUFLAGE\R\NIN DER BREITE VERSTELLBARE HILFSAUFLAGE BESTEHEND AUS EINEM ALUMINIUMPROFIL MIT NICHT ANGETRIEBENEN ROLLEN.\R\N\R\NNC-STEUERUNG\R\N\R\NEIGENSCHAFTEN\R\N- BETRIEBSSYSTEM WINDOWS XP PROFESSIONELL\R\N- SINTRA MASCHINENSTEUERUNG MIT WINDOWS XP OBERFLäCHE\R\N- POSITIONIERUNG DER ACHSEN (MASCHINE RüSTEN)\R\N- ELEKTRONISCHE VERSTELLUNG DER VORSCHUBGESCHWINDIGKEIT\R\N- ELEKTRONISCHE VERSTELLUNG DES OBERDRUCKS\R\N\R\NFüGEFRäSAGGREGAT\R\NFRäSAGGREGAT BESTEHEND AUS 2 GEGENLäUFIGEN FRäSER MIT VERTIKALER ACHSE.\R\N- DREHZAHL WERKZEUG MIN. 9.000 U/MIN\R\N- MOTORLEISTUNG MIN. 3,5 + 3,5 KW\R\N- WELLE (D. X LäNGE) MIN. 30 X 50 MM\R\NNC-GESTEUERTER TASTSCHUH AM ERSTEN MOTOR UM DIE STäRKE DES ABTRAGES AUTOMATISCH VERSTELLEN ZU KöNNEN\R\N\R\NINFRAROTHEIZLAMPE\R\N2 INFRAROTHEIZLAMPEN, EINE OBEN EINE UNTEN ZUR VORWäRMUNG DER WERKSTüCKKANTE DIE ANGELEIMT WIRD.\R\N\R\NLEIMAUFTRAGSSTATION\R\NANLEIMSTATION FüR GERADE KANTEN AUS MELAMINHARZ, ABS, PVC, PP, FURNIER\R\NMIT THERMOPLASTISCHEN EVA- KLEBSTOFFEN\R\N- PATENTIERTES HIGH- MELT SYSTEM, LEIMWALZE UND LEIMSCHALE GETRENNT\R\N- SCHNELLWECHSELSYSTEM DER LEIMSCHALE DURCH EINFACHES HERAUS-SCHWENKEN AUS DEM AGGREGAT\R\N- LEIMWALZE UND SCHALE KOMPLETT TEFLONBESCHICHTET\R\N- LEIMMENGENDOSIERUNG EINFACH EINSTELLBAR\R\N- ELEKTRONISCHE SYNCHRONLAUF DER LEIMWALZE MIT PLATTENVORSCHUB\R\N- GRANULATBEHäLTER MIT SCHLEUSE DIREKT AN DER AUFSCHMELZEINHEIT\R\N- KANTENüBERWACHUNG MITTELS FOTOZELLE\R\N- AUTOMATISCHE KANTENWECHSEL NC-GESTEUERT\R\NDRUCKZONE:\R\N- 1 ANGETRIEBENE ROLLE D= 150 MM\R\N- 3 FREILAUFENDE ROLLEN D= 65 MM\R\N\R\NTECHNISCHE DATEN:\R\N- KANTENSTäRKE MIN. 0,3 MM MAX. 3 MM\R\N- KANTENQUERSCHNITT KAPPSCHERE MIN. 135\R\N- WERKSTüCKSTäRKE MIN. 10 MM MAX. 60 MM\R\N- KANTENHöHE MIN. 15 MM MAX. 65 MM\R\N- MINIMALE KANTENLäNGE MIN. 150 MM\R\N\R\NNC Y-ACHSE FüR DRUCKZONE\R\NDIE VERSTELLUNG DER DRUCKZONE ERFOLGT MOTORISIERT UND WIRD üBER DIE STEUERUNG EINGESTELLT.\R\N\R\NZ-ACHSE FüR KANTENZUFüHRUNG\R\NAUTOMATISCHE HöHENVERSTELLUNG DER KANTENZUFüHRUNG, IN POSITION ZUR ANGETRIEBENEN ANDRUCKROLLE.\R\N\R\NZWöLFFACH KANTENMAGAZIN\R\NKANTENMAGAZIN FüR 12 ROLLENKANTEN\R\NDIE KANTENROLLEN WERDEN VERTIKAL IN DAS MAGAZIN HINEINGESTELLT UND üBER EINE FOTOZELLE WIRD DAS ENDE DER ROLLE üBERWACHT.\R\NDIE AUSWAHL DER KANTE ERFOLGT VON DER STEUERUNG UND BEI HINTERLEGUNG DES GLEICHEN KANTENTYPE WIRD AUTOMATISCH BEIM ENDE DER ROLLE AUF DIE ANDERE GEWECHSELT.\R\N\R\NKAPPAGGREGAT IT90-S\R\NKAPPAGGGREGAT, KOMPLETT MIT 2 MOTOREN FüR ANLEIMSTäRKEN BIS 3 MM.\R\NNEIGUNG DER MOTOREN AN DER VERTIKALACHSE VON 0° AUF 25° MIT AUTOMATISCHER SCHWENKUNG.\R\N\R\NTECHNISCHE DATEN:\R\N- DREHZAHL MIN. 12.000 RQM\R\N- MOTORLEISTUNG MIN. 0,3 + 0,3 KW\R\N- VORSCHUBGESCHWINDIGKEIT MIN. 28 MT/MIN\R\N- KANTENDICKE MIN. 0,3 MM MAX. 3 MM\R\N- WERKSTüCKDICKE MIN. 10 MM MAX. 60 MM\R\N\R\NTASTSCHUH MIT 3 POSITIONEN FüR KAPPAGGREGAT IT90\R\N3 UNABHäNGIG VONEINANDER EINSTELLBARE ANSCHLäGE PRO SäGEWAGEN ZUM VERSTELLEN DES Y-TASTSCHUHES.\R\NDIE AUSWAHL DES ANSCHLAGES ERFOLGT ELEKTROPNEUMATISCH UND WIRD VOM PC AUS GESTEUERT.\R\N\R\NVORFRäSAGGREGAT RS10\R\NDAS AGGREGAT IST MIT ZWEI üBEREINANDER ANGEORDNETEN MOTOREN AUSGESTATTET.\R\NBEIDE MOTOREN SIND MIT VERTIKALEN TASTROLLEN AUSGESTATTET.\R\N\R\NTECHNISCHE DATEN:\R\N- DREHZAHL MIN. 12.000 U/MIN.\R\N- MOTORLESITUNG 1,3 + 1,3 KW\R\N\R\NFEINFRäSAGGREGAT RF40 - FASE 25°\R\NJEDER MOTOR IST KOMPLETT MIT HORIZONTALEM UND VERTIKALEM TASTER UND AUF SCHLITTEN SCHWENKBAR.\R\N\R\NTECHNISCHE DATEN:\R\N- DREHZAHL MIN. 12.000 U/MIN.\R\N- MOTORLEISTUNG 0,65 + 0,65 KW\R\N\R\NMULTIFUNKTIONSFRäSAGGREGAT AR30\R\NFüR FEINFRäSEN UND ECKENKOPIEREN AN WERKSTüCKEN MIT (ABS/PVC/PP) KANTEN BIS 3 MM STäRKE.\R\NECKENKOPIEREN IST AN GERADEN SOWIE AN PROFILIERTEN KANTEN ALS AUCH AN SOFT- UND POSTFORMINGPLATTEN 90° UND 180° WERKSTüCKE.\R\NFEINFRäSEN IN HOHER QUALITäT\R\N\R\NAUTOMATISCHES UMRüSTEN VON DüNN- AUF DICKKANTE\R\NES IST MöGLICH DAS AGGREGAT VOM BEDIENPULT AUS AUTOMATISCH VON DüNNKANTE (0,4 MM) AUF DICKKANTE (3,0 MM) UMZUSTELLEN.\R\N\R\NTECHNISCHE DATEN:\R\N- DREHZAHL MIN. 12.000 U/MIN.\R\N- MOTORLEISTUNG 0,35 + 0,35 KW\R\N- VORSCHUBGESCHWINDIGKEIT MAX. 18 M/MIN.\R\N- KANTENSTäRKE MIN. 0,3 MM MAX. 3 MM\R\N\R\N4 PNEUMATISCHE FESTPUNKTE FüR SEITENTASTER AR30\R\NNC GESTEUERTE FESTPUNKTE ZUM VERSTELLEN DES SEITENTASTERS ZUM BEARBEITEN VON 3 DüNNKANTEN UND 2 DICKKANTEN\R\N\R\NAUTOMATISCHES WERKZEUGWECHSELMAGAZIN \R\NAUTOMATISCHEN WERKZEUGWECHSEL MIT EINEM 5-FACH MAGAZIN\R\N\R\NPROFILZIEHKLINGENAGGREGAT RB40\R\NZUR NACHBEARBEITUNG FüR ABS/PVC/PP KANTEN.\R\NENTHäLT EINE OBERE UND EINE UNTERE EINHEIT MIT VERTIKALEN UND HORIZONTALEN KOPIERSCHEIBEN.\R\NAUTOMATIS
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 95.000 €
Ubicación: Land-ermi dosing line for bottles for non-aseptic products, used for fermented milk or drink yogurt, type: cnn, year of purchase: 2005, capacity: 27 to 35 cycles per minute either between 38880 and 50400 bottles per hour, volume bottles: 100 ml and 125 ml, 4 laminar flow , bottle disinfection by h â² o â², 4 storages of 24 thermo-sealable aluminum cap piles: autonomy of 40 minutes, production hours: 40000 hours, including 2 krones ag contiroll labellers, outfeed accumulation table, aries multi pack wrap around sleeve packaging machine, carton overpack machine and palletizing machine.

the line is already dismantled.

located on other location in 57170 chã¢teau-salins, france, viewing and pick up in zurich with industrial auctions bv.

click here for more detailed information in the pdf file attached.

https://issuu.com/industrialauctionsbv/docs/ermi_cnn_bottle_dosing_line ERMI DOSING LINE FOR BOTTLES FOR NON-ASEPTIC PRODUCTS, USED FOR FERMENTED MILK OR DRINK YOGURT, TYPE: CNN, YEAR OF PURCHASE: 2005, CAPACITY: 27 TO 35 CYCLES PER MINUTE EITHER BETWEEN 38880 AND 50400 BOTTLES PER HOUR, VOLUME BOTTLES: 100 ML AND 125 ML, 4 LAMINAR FLOW , BOTTLE DISINFECTION BY H &ACIRC;&SUP2; O &ACIRC;&SUP2;, 4 STORAGES OF 24 THERMO-SEALABLE ALUMINUM CAP PILES: AUTONOMY OF 40 MINUTES, PRODUCTION HOURS: 40000 HOURS, INCLUDING 2 KRONES AG CONTIROLL LABELLERS, OUTFEED ACCUMULATION TABLE, ARIES MULTI PACK WRAP AROUND SLEEVE PACKAGING MACHINE, CARTON OVERPACK MACHINE AND PALLETIZING MACHINE. THE LINE IS ALREADY DISMANTLED. LOCATED ON OTHER LOCATION IN 57170 CH&ATILDE;&CENT;TEAU-SALINS, FRANCE, VIEWING AND PICK UP IN ZURICH WITH INDUSTRIAL AUCTIONS BV. CLICK HERE FOR MORE DETAILED INFORMATION IN THE PDF FILE ATTACHED. HTTPS://ISSUU.COM/INDUSTRIALAUCTIONSBV/DOCS/ERMI_CNN_BOTTLE_DOSING_LINE
Vendedor: Industrial Auctions BV
Año de construcción: usado
Precio: used machinery auction RESALE 60 €
Ubicación: Land-weight approx.: 25 kg<br/>dimensions (l x w x h) approx.: 850 x 350 x 450 mm<br/>description: serial number 36030<br> 220 v<br> thermic power 18 kw - 15500 kcal/h<br> air capacity 600 m³/h<br> diesel fuel WEIGHT APPROX.: 25 KG
DIMENSIONS (L X W X H) APPROX.: 850 X 350 X 450 MM
DESCRIPTION: SERIAL NUMBER 36030
220 V
THERMIC POWER 18 KW - 15500 KCAL/H
AIR CAPACITY 600 M³/H
DIESEL FUEL
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 60.000 €
Ubicación: Land-erca-shape seal thermoforming machine for round pots, type: efo 1000, number: 67605, year of construction: 2007, 400 v, 50 hz, 209 a, 145 kva capacity: 36000 pots per hour, volume pots: 125 ml, production hours: 17000 hours, including film unwind film for jumbo roll, film width: 1600 mm , plastic cutter for residual film, preheating table and heating system, crusher in soundproofing cabinet, suction system with big bag loader, 2 silo's for pots, suitable for 385000 pots for each silo, switch cabinet and various spare parts.

machines are already dismantled.

located on other location in 57170 chã¢teau-salins, france, viewing and pick up in zurich with industrial auctions bv.

click here for more detailed information in the pdf file attached.

https://issuu.com/industrialauctionsbv/docs/erca-formseal_thermoformer_for_pots ERCA-SHAPE SEAL THERMOFORMING MACHINE FOR ROUND POTS, TYPE: EFO 1000, NUMBER: 67605, YEAR OF CONSTRUCTION: 2007, 400 V, 50 HZ, 209 A, 145 KVA CAPACITY: 36000 POTS PER HOUR, VOLUME POTS: 125 ML, PRODUCTION HOURS: 17000 HOURS, INCLUDING FILM UNWIND FILM FOR JUMBO ROLL, FILM WIDTH: 1600 MM , PLASTIC CUTTER FOR RESIDUAL FILM, PREHEATING TABLE AND HEATING SYSTEM, CRUSHER IN SOUNDPROOFING CABINET, SUCTION SYSTEM WITH BIG BAG LOADER, 2 SILO'S FOR POTS, SUITABLE FOR 385000 POTS FOR EACH SILO, SWITCH CABINET AND VARIOUS SPARE PARTS. MACHINES ARE ALREADY DISMANTLED. LOCATED ON OTHER LOCATION IN 57170 CH&ATILDE;&CENT;TEAU-SALINS, FRANCE, VIEWING AND PICK UP IN ZURICH WITH INDUSTRIAL AUCTIONS BV. CLICK HERE FOR MORE DETAILED INFORMATION IN THE PDF FILE ATTACHED. HTTPS://ISSUU.COM/INDUSTRIALAUCTIONSBV/DOCS/ERCA-FORMSEAL_THERMOFORMER_FOR_POTS
Vendedor: Industrial Auctions BV
Año de construcción: usado
Precio: used machinery auction RESALE 6.000 €
Ubicación: Land-weight approx.: 750 kg<br/>dimensions (l x w x h) approx.: 1900 x 1300 x 1300 mm<br/>description: serial no.: 882<br> <b>without pc and monitor!</b><br> additional technical data and information please have a look at documentation and pdf! transportdimensions: - 1900 x 1300 x 1300 mm, 750 kg WEIGHT APPROX.: 750 KG
DIMENSIONS (L X W X H) APPROX.: 1900 X 1300 X 1300 MM
DESCRIPTION: SERIAL NO.: 882
WITHOUT PC AND MONITOR!
ADDITIONAL TECHNICAL DATA AND INFORMATION PLEASE HAVE A LOOK AT DOCUMENTATION AND PDF! TRANSPORTDIMENSIONS: - 1900 X 1300 X 1300 MM, 750 KG
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-used functional kerres combined chamber ret-c serial no. 10,700 power 6,5 kw USED FUNCTIONAL KERRES COMBINED CHAMBER RET-C SERIAL NO. 10,700 POWER 6,5 KW
Vendedor: RGS Technik
Año de construcción: usado
Ubicación: Land-filling amount:100 liter<br/>heating:4,5 kw<br/>blower power:0,95 kw<br/>air volume:90 m3/h<br/>conveying height:3 m<br/>feed pressure:0,055 bar<br/>weight:150 kg<br/><br/>dry air granulate drying equipment make \ FILLING AMOUNT:100 LITER
HEATING:4,5 KW
BLOWER POWER:0,95 KW
AIR VOLUME:90 M3/H
CONVEYING HEIGHT:3 M
FEED PRESSURE:0,055 BAR
WEIGHT:150 KG

DRY AIR GRANULATE DRYING EQUIPMENT MAKE \"ARBURG\" TYPE THERMOLIFT 100-2 (NEWEST VERSION) WITH AUTOMATIC SWITCHON AND INTERVAL SWITCHING IN THERMALLY ISOLATED VERSION WITH ASSEMBLY DRY AIR OPERATION WITH FEEDING REGULATOR AND TUBE 3000 MM FUNCTION TESTED
Vendedor: Makutec Maschinen- und Kunststofftechnik GmbH
Año de construcción: usado
Ubicación: Land-
manual control
    boiler capacity: lt 7-52 (min. - max.)
    machine weight: 310 kg
    gross weight: 1200 x 1000 x 1800 mm (lxwxh)
    cooking time: 75/90 min
    temp. thermostat setting: 130 â° c
    thermo-oil heated

machine consists of:
-iron frame, painted white
-stainless steel boiler with oil coat
-motor and electronics protection
-safety grid on the boiler
-fixed stand ensures stability MANUAL CONTROL BOILER CAPACITY: LT 7-52 (MIN. - MAX.) MACHINE WEIGHT: 310 KG GROSS WEIGHT: 1200 X 1000 X 1800 MM (LXWXH) COOKING TIME: 75/90 MIN TEMP. THERMOSTAT SETTING: 130 &ACIRC;&DEG; C THERMO-OIL HEATED MACHINE CONSISTS OF: -IRON FRAME, PAINTED WHITE -STAINLESS STEEL BOILER WITH OIL COAT -MOTOR AND ELECTRONICS PROTECTION -SAFETY GRID ON THE BOILER -FIXED STAND ENSURES STABILITY
Vendedor: Backservice Gaux GmbH
Año de construcción: usado
Ubicación: Land-the injection molding machine is intended for the processing of thermosetting plastics (polyethylene, polypropylene, polystyrene) using injection molds. the mold is not an integral part of the injection molding machine. the thermosetting material in the form of a granulate is sucked under vacuum from the container to the dispenser, then it is supplied to the plasticizing system (cylinder, screw, injection system). at the temperature of 200-230 ° THE INJECTION MOLDING MACHINE IS INTENDED FOR THE PROCESSING OF THERMOSETTING PLASTICS (POLYETHYLENE, POLYPROPYLENE, POLYSTYRENE) USING INJECTION MOLDS. THE MOLD IS NOT AN INTEGRAL PART OF THE INJECTION MOLDING MACHINE. THE THERMOSETTING MATERIAL IN THE FORM OF A GRANULATE IS SUCKED UNDER VACUUM FROM THE CONTAINER TO THE DISPENSER, THEN IT IS SUPPLIED TO THE PLASTICIZING SYSTEM (CYLINDER, SCREW, INJECTION SYSTEM). AT THE TEMPERATURE OF 200-230 &DEG
Vendedor: Kennedy Machines
Año de construcción: usado
Precio: 3.950 €
Ubicación: Land-absolutely new machine!

the sievert tw 5000 is an electronically controlled hot air welding machine for all types of welding lines which can be welded in the overlap method.
suitable for welding of all thermoplastics and rubber materials. these include cspe, ecp, epdm, pvc, tpo sbs and app

technical data:

manufacturer: sievert
type: tw 5000
model: 299001
year of manufacture: 10 / 2013

voltage: 400 v
performance: 6,300 watt
temperature range: 40 â° c - 650 â° c
speed: 0-7 m / min
air flow: 0-48 l / s
welding range: 40 â?? 50 cm

4-wheel drive
digital display to the control of temperature, speed and function control
infinitely adjustable speed, temperature and fan speed
independent wheels

dimensions: 560 x 380 x 250 mm
weight: approx. 30 kg

spare parts: heating element tw 5000 (art.-no.: 799007)
operating instructions and spare parts list

price location 19% vat in addition 73450 neresheim
mistakes and intermediate sale is reserved ABSOLUTELY NEW MACHINE! THE SIEVERT TW 5000 IS AN ELECTRONICALLY CONTROLLED HOT AIR WELDING MACHINE FOR ALL TYPES OF WELDING LINES WHICH CAN BE WELDED IN THE OVERLAP METHOD. SUITABLE FOR WELDING OF ALL THERMOPLASTICS AND RUBBER MATERIALS. THESE INCLUDE CSPE, ECP, EPDM, PVC, TPO SBS AND APP TECHNICAL DATA: MANUFACTURER: SIEVERT TYPE: TW 5000 MODEL: 299001 YEAR OF MANUFACTURE: 10 / 2013 VOLTAGE: 400 V PERFORMANCE: 6,300 WATT TEMPERATURE RANGE: 40 &ACIRC;&DEG; C - 650 &ACIRC;&DEG; C SPEED: 0-7 M / MIN AIR FLOW: 0-48 L / S WELDING RANGE: 40 &ACIRC;?? 50 CM 4-WHEEL DRIVE DIGITAL DISPLAY TO THE CONTROL OF TEMPERATURE, SPEED AND FUNCTION CONTROL INFINITELY ADJUSTABLE SPEED, TEMPERATURE AND FAN SPEED INDEPENDENT WHEELS DIMENSIONS: 560 X 380 X 250 MM WEIGHT: APPROX. 30 KG SPARE PARTS: HEATING ELEMENT TW 5000 (ART.-NO.: 799007) OPERATING INSTRUCTIONS AND SPARE PARTS LIST PRICE LOCATION 19% VAT IN ADDITION 73450 NERESHEIM MISTAKES AND INTERMEDIATE SALE IS RESERVED
Vendedor: Umrath Handel & Verwertung
Año de construcción: usado
Precio: used machinery auction RESALE 1.000 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 700 x 700 x 2200 mm<br/>description: thermo tec - environment climatic chamber uv light daylight - tcs 301<br> environment simulation chamber with 2 levels daylight-irradiation<br> and 2 levels with uv-light-irradiation<br> - temperature range: -20...+80 °c<br> - rel air humiditiy: 0...100 %rh<br> WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 700 X 700 X 2200 MM
DESCRIPTION: THERMO TEC - ENVIRONMENT CLIMATIC CHAMBER UV LIGHT DAYLIGHT - TCS 301
ENVIRONMENT SIMULATION CHAMBER WITH 2 LEVELS DAYLIGHT-IRRADIATION
AND 2 LEVELS WITH UV-LIGHT-IRRADIATION
- TEMPERATURE RANGE: -20...+80 °C
- REL AIR HUMIDITIY: 0...100 %RH
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-semi-automatic cold saw machines hdm 1412 with stable swivel bearings for sawing of steel construction profiles â?¢ infinitely variable-frequency-controlled cutting speed â?¢ electro-mechanical blade feed
â?¢ automatic regulation of feed and cutting speed by active power detection
â?¢ hydraulic horizontal clamping device
â?¢ electronic overload protection
â?¢ heating system with thermostat for hydraulic power pack
â?¢ savings lubrication by means of mikrodosieranlage, connection to the factory air supply possible
â?¢ vertical clamping device to cut bundles
â?¢ saw blade-positioning device
â?¢ laser to represent the cutting edge
â?¢ software proficut
â?¢ work area 90 degrees - rectangle material 440 x 440 (mm), 1000 x 450 (mm)
â?¢ smallest material cross section 50 x 50 (mm)
â?¢ segment saw blade diameter x width 1430 x 9, 5 (mm)
â?¢ saw blade holder 100 / 4 x 30/250 (mm)
â?¢ saw motor frequency controlled 22 kw
â?¢ hydraulic power unit 3kw (capacity 23 l / min)
â?¢ vertical vise 1.5 kw
â?¢ hydraulic heating 1 kw
â?¢ cutting speeds 8-30 m / min
â?¢ saw blade feed 0-400 mm / min, rapid return of blade 2000 mm / min
â?¢ working height 760 mm above floor
â?¢ compressed air connection (customer) 6-8 bar
â?¢ weight 9500 kg (machine without accessories)
â?¢ machine dimensions (lxwxh in mm) 3700 x 1500 x 3200
â?¢ electrical supply: 3 phases + neutral + earth 400v / 50 hz length measuring device l 220

â?¢ measuring range up to 15 m
â?¢ measuring vehicle speed 0-30 m / min
â?¢ i-beam, l - and u-steel square tubes, flat steel from 20 mm
â?¢ data input via control panel
â?¢ heavy, moveable foot
â?¢ geared motor for up and disengaging of the stop arm
â?¢ stop arm with upstream photoelectric sensor for automatic switching of the transport speed of express on creep
â?¢ stop plate capacitive switching
â?¢ automatic trigger of clamping operations
â?¢ attachment piece for measuring short sections.

transportation t13

â?¢ operation via joy-stick
â?¢ roller conveyor in separate elements, solid welded construction
â?¢ maintenance-free ball bearing casters
â?¢ track rollers on the supply and removal page with frequency-regulated gear motor (continuous)
â?¢ vertical stop rolling to the longitudinal guidance on the fixed investment side
â?¢ material length: feed roller 2.2-15 m, removal roller 1.2-15 m
â?¢ working height 760 mm
â?¢ roll diameter 77, 4 mm, roll width 1130 mm, width 1020 mm
â?¢ transport speed infinitely variable 0-30 m / min

SEMI-AUTOMATIC COLD SAW MACHINES HDM 1412 WITH STABLE SWIVEL BEARINGS FOR SAWING OF STEEL CONSTRUCTION PROFILES &ACIRC;?&CENT; INFINITELY VARIABLE-FREQUENCY-CONTROLLED CUTTING SPEED &ACIRC;?&CENT; ELECTRO-MECHANICAL BLADE FEED &ACIRC;?&CENT; AUTOMATIC REGULATION OF FEED AND CUTTING SPEED BY ACTIVE POWER DETECTION &ACIRC;?&CENT; HYDRAULIC HORIZONTAL CLAMPING DEVICE &ACIRC;?&CENT; ELECTRONIC OVERLOAD PROTECTION &ACIRC;?&CENT; HEATING SYSTEM WITH THERMOSTAT FOR HYDRAULIC POWER PACK &ACIRC;?&CENT; SAVINGS LUBRICATION BY MEANS OF MIKRODOSIERANLAGE, CONNECTION TO THE FACTORY AIR SUPPLY POSSIBLE &ACIRC;?&CENT; VERTICAL CLAMPING DEVICE TO CUT BUNDLES &ACIRC;?&CENT; SAW BLADE-POSITIONING DEVICE &ACIRC;?&CENT; LASER TO REPRESENT THE CUTTING EDGE &ACIRC;?&CENT; SOFTWARE PROFICUT &ACIRC;?&CENT; WORK AREA 90 DEGREES - RECTANGLE MATERIAL 440 X 440 (MM), 1000 X 450 (MM) &ACIRC;?&CENT; SMALLEST MATERIAL CROSS SECTION 50 X 50 (MM) &ACIRC;?&CENT; SEGMENT SAW BLADE DIAMETER X WIDTH 1430 X 9, 5 (MM) &ACIRC;?&CENT; SAW BLADE HOLDER 100 / 4 X 30/250 (MM) &ACIRC;?&CENT; SAW MOTOR FREQUENCY CONTROLLED 22 KW &ACIRC;?&CENT; HYDRAULIC POWER UNIT 3KW (CAPACITY 23 L / MIN) &ACIRC;?&CENT; VERTICAL VISE 1.5 KW &ACIRC;?&CENT; HYDRAULIC HEATING 1 KW &ACIRC;?&CENT; CUTTING SPEEDS 8-30 M / MIN &ACIRC;?&CENT; SAW BLADE FEED 0-400 MM / MIN, RAPID RETURN OF BLADE 2000 MM / MIN &ACIRC;?&CENT; WORKING HEIGHT 760 MM ABOVE FLOOR &ACIRC;?&CENT; COMPRESSED AIR CONNECTION (CUSTOMER) 6-8 BAR &ACIRC;?&CENT; WEIGHT 9500 KG (MACHINE WITHOUT ACCESSORIES) &ACIRC;?&CENT; MACHINE DIMENSIONS (LXWXH IN MM) 3700 X 1500 X 3200 &ACIRC;?&CENT; ELECTRICAL SUPPLY: 3 PHASES + NEUTRAL + EARTH 400V / 50 HZ LENGTH MEASURING DEVICE L 220 &ACIRC;?&CENT; MEASURING RANGE UP TO 15 M &ACIRC;?&CENT; MEASURING VEHICLE SPEED 0-30 M / MIN &ACIRC;?&CENT; I-BEAM, L - AND U-STEEL SQUARE TUBES, FLAT STEEL FROM 20 MM &ACIRC;?&CENT; DATA INPUT VIA CONTROL PANEL &ACIRC;?&CENT; HEAVY, MOVEABLE FOOT &ACIRC;?&CENT; GEARED MOTOR FOR UP AND DISENGAGING OF THE STOP ARM &ACIRC;?&CENT; STOP ARM WITH UPSTREAM PHOTOELECTRIC SENSOR FOR AUTOMATIC SWITCHING OF THE TRANSPORT SPEED OF EXPRESS ON CREEP &ACIRC;?&CENT; STOP PLATE CAPACITIVE SWITCHING &ACIRC;?&CENT; AUTOMATIC TRIGGER OF CLAMPING OPERATIONS &ACIRC;?&CENT; ATTACHMENT PIECE FOR MEASURING SHORT SECTIONS. TRANSPORTATION T13 &ACIRC;?&CENT; OPERATION VIA JOY-STICK &ACIRC;?&CENT; ROLLER CONVEYOR IN SEPARATE ELEMENTS, SOLID WELDED CONSTRUCTION &ACIRC;?&CENT; MAINTENANCE-FREE BALL BEARING CASTERS &ACIRC;?&CENT; TRACK ROLLERS ON THE SUPPLY AND REMOVAL PAGE WITH FREQUENCY-REGULATED GEAR MOTOR (CONTINUOUS) &ACIRC;?&CENT; VERTICAL STOP ROLLING TO THE LONGITUDINAL GUIDANCE ON THE FIXED INVESTMENT SIDE &ACIRC;?&CENT; MATERIAL LENGTH: FEED ROLLER 2.2-15 M, REMOVAL ROLLER 1.2-15 M &ACIRC;?&CENT; WORKING HEIGHT 760 MM &ACIRC;?&CENT; ROLL DIAMETER 77, 4 MM, ROLL WIDTH 1130 MM, WIDTH 1020 MM &ACIRC;?&CENT; TRANSPORT SPEED INFINITELY VARIABLE 0-30 M / MIN
Vendedor: Rhenus Port Logistics Rhein-Ruhr GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 50 kg<br/>dimensions (l x w x h) approx.: 600 x 500 x 400 mm<br/>description: neumÄrker - stainless steel shop baking oven hot-air oven arianna - 00742<br> - for 4 plates<br> - manual operation<br> - 2 fans clockwise and counter-clockwise rotation<br> - no fixed water connection<br> - logarithmic timer 0-120 min.<br> - enamelled baking chamber<br> - capacity 4x435x315 mm<br> - distance between the plates 75 mm<br> - mechanic thermostat 50-300 °c<br> - dimensions 595x549x570 mm<br> - 230 v/2.6 kw<br> WEIGHT APPROX.: 50 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 500 X 400 MM
DESCRIPTION: NEUMÄRKER - STAINLESS STEEL SHOP BAKING OVEN HOT-AIR OVEN ARIANNA - 00742
- FOR 4 PLATES
- MANUAL OPERATION
- 2 FANS CLOCKWISE AND COUNTER-CLOCKWISE ROTATION
- NO FIXED WATER CONNECTION
- LOGARITHMIC TIMER 0-120 MIN.
- ENAMELLED BAKING CHAMBER
- CAPACITY 4X435X315 MM
- DISTANCE BETWEEN THE PLATES 75 MM
- MECHANIC THERMOSTAT 50-300 °C
- DIMENSIONS 595X549X570 MM
- 230 V/2.6 KW
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-metal detectors, 6 pcs.

- metal detectors for different package sizes

brand:
- thermo koring kerr
- safeline, 4 pcs.
- geia   METAL DETECTORS, 6 PCS. - METAL DETECTORS FOR DIFFERENT PACKAGE SIZES BRAND: - THERMO KORING KERR - SAFELINE, 4 PCS. - GEIA
Vendedor: JPT-ProTech AB
Año de construcción: usado
Ubicación: Land-tray dryer (1x), make pink gmbh thermosysteme wertheim, type vsd 850-950-200-5 durchreicheausführung, new 1998, stainless steel housing (1.4571), stainless steel trays (1.4571), heating surface 4,0 m2, drying chamber capacity ± 1250 ltr, drying chamber sizes 1000x1150x1090mm, working pressure vacuum/0,1 bar, max. temperature 110 degr. c., number of trays 5, tray sizes 900x940mm, distance between the trays 195mm, working pressure trays 4 bar, with 2 doors , with nenninger oil heater (21 kw), with vacuum pump make becker, type kvt-2.60, motor 1,5 kw, 220/380 volt, machine number 984625, mounted on frame, with switchgear, floorspace 1,6x1,4 m, total height 2,2 m, weight 1550 kgtray dryersdryers > tray dryers TRAY DRYER (1X), MAKE PINK GMBH THERMOSYSTEME WERTHEIM, TYPE VSD 850-950-200-5 DURCHREICHEAUSFüHRUNG, NEW 1998, STAINLESS STEEL HOUSING (1.4571), STAINLESS STEEL TRAYS (1.4571), HEATING SURFACE 4,0 M2, DRYING CHAMBER CAPACITY ± 1250 LTR, DRYING CHAMBER SIZES 1000X1150X1090MM, WORKING PRESSURE VACUUM/0,1 BAR, MAX. TEMPERATURE 110 DEGR. C., NUMBER OF TRAYS 5, TRAY SIZES 900X940MM, DISTANCE BETWEEN THE TRAYS 195MM, WORKING PRESSURE TRAYS 4 BAR, WITH 2 DOORS , WITH NENNINGER OIL HEATER (21 KW), WITH VACUUM PUMP MAKE BECKER, TYPE KVT-2.60, MOTOR 1,5 KW, 220/380 VOLT, MACHINE NUMBER 984625, MOUNTED ON FRAME, WITH SWITCHGEAR, FLOORSPACE 1,6X1,4 M, TOTAL HEIGHT 2,2 M, WEIGHT 1550 KGTRAY DRYERSDRYERS > TRAY DRYERS
Vendedor: Foeth
Año de construcción: usado
Precio: 2.500 €
Ubicación: Land-new mini-brewplant for 50 litert/brew, complete in stainless steel, tubs are isolated and fully welded with stainless steel-jacket, standing on stainless steel basis frame, with mash- / wortkettle ~80 lt. content, heated electrical by thermo-oil bath; lauter tun ~60 lt. content, with removable false bottom in s/s, lautering.
 NEW MINI-BREWPLANT FOR 50 LITERT/BREW, COMPLETE IN STAINLESS STEEL, TUBS ARE ISOLATED AND FULLY WELDED WITH STAINLESS STEEL-JACKET, STANDING ON STAINLESS STEEL BASIS FRAME, WITH MASH- / WORTKETTLE ~80 LT. CONTENT, HEATED ELECTRICAL BY THERMO-OIL BATH; LAUTER TUN ~60 LT. CONTENT, WITH REMOVABLE FALSE BOTTOM IN S/S, LAUTERING.
Vendedor: Hümmer GmbH
Año de construcción: usado
Ubicación: Land-make pmt / tamson instruments, type tc-58, new unknown, water heater thermostatic bath (1x), electric heating, electric capacity 2800 watt (1 ph), temperature max. 250 degr. c., tank capacity 58 ltr, bath dimensions ± 275x420x300mm, with pump, with temperature controller, mach.no. 11t008, with switch, floorspace 0,8x0,4 m, total height 0,6 mthermal fluid unitsheat exchangers > thermal fluid units MAKE PMT / TAMSON INSTRUMENTS, TYPE TC-58, NEW UNKNOWN, WATER HEATER THERMOSTATIC BATH (1X), ELECTRIC HEATING, ELECTRIC CAPACITY 2800 WATT (1 PH), TEMPERATURE MAX. 250 DEGR. C., TANK CAPACITY 58 LTR, BATH DIMENSIONS ± 275X420X300MM, WITH PUMP, WITH TEMPERATURE CONTROLLER, MACH.NO. 11T008, WITH SWITCH, FLOORSPACE 0,8X0,4 M, TOTAL HEIGHT 0,6 MTHERMAL FLUID UNITSHEAT EXCHANGERS > THERMAL FLUID UNITS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-daub / heuft furnaces and others
2900 1/min DAUB / HEUFT FURNACES AND OTHERS 2900 1/MIN
Vendedor: Güzel Taceddin
Año de construcción: usado
Ubicación: Land-vacuum drying oven, make thermo electron corp., type vt 6420m-f, no 40504730, material stainless steel, max. temperature 200 °c, capacity 120 ltr, internal width 485mm, internal depth 524mm, internal height 480mm, gas heating, number of doors: 1, with trays 7, mounted on frame, floorspace 1,0x0,9 m, total height 1,6 m, weight 250 kgdrying ovensdryers > drying ovens VACUUM DRYING OVEN, MAKE THERMO ELECTRON CORP., TYPE VT 6420M-F, NO 40504730, MATERIAL STAINLESS STEEL, MAX. TEMPERATURE 200 °C, CAPACITY 120 LTR, INTERNAL WIDTH 485MM, INTERNAL DEPTH 524MM, INTERNAL HEIGHT 480MM, GAS HEATING, NUMBER OF DOORS: 1, WITH TRAYS 7, MOUNTED ON FRAME, FLOORSPACE 1,0X0,9 M, TOTAL HEIGHT 1,6 M, WEIGHT 250 KGDRYING OVENSDRYERS > DRYING OVENS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-working width: 500mm, length: 6360mm, wdith: 520mm, height: 2008mm.  WORKING WIDTH: 500MM, LENGTH: 6360MM, WDITH: 520MM, HEIGHT: 2008MM.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-vacuum drying oven (1x), make heraus / thermo electron, type vacutherm vt-6025, no 40656365, new unknown, material stainless steel, max. temperature 200 degr. c., number of compartments: 1, capacity 25 ltr, internal width 300mm, internal depth 300mm, internal height 270mm, electric heating, electric capacity 1,3 kw, 230 volt, number of doors: 1, with switch, floorspace 0,5x0,6 m, total height 0,6 mdrying ovensdryers > drying ovens VACUUM DRYING OVEN (1X), MAKE HERAUS / THERMO ELECTRON, TYPE VACUTHERM VT-6025, NO 40656365, NEW UNKNOWN, MATERIAL STAINLESS STEEL, MAX. TEMPERATURE 200 DEGR. C., NUMBER OF COMPARTMENTS: 1, CAPACITY 25 LTR, INTERNAL WIDTH 300MM, INTERNAL DEPTH 300MM, INTERNAL HEIGHT 270MM, ELECTRIC HEATING, ELECTRIC CAPACITY 1,3 KW, 230 VOLT, NUMBER OF DOORS: 1, WITH SWITCH, FLOORSPACE 0,5X0,6 M, TOTAL HEIGHT 0,6 MDRYING OVENSDRYERS > DRYING OVENS
Vendedor: Foeth
Año de construcción: usado
Precio: 2.000 €
Ubicación: Land-used decommissioned tiromaten t 3000 in untercshiedlichen width
as spare parts. 
many parts still available USED DECOMMISSIONED TIROMATEN T 3000 IN UNTERCSHIEDLICHEN WIDTH AS SPARE PARTS. MANY PARTS STILL AVAILABLE
Vendedor: RGS Technik
Año de construcción: usado
Ubicación: Land-hot mixer (1x), material stainless steel, capacity 0,75-2,25 ltr, vessel sizes dia. 155x150mm, with jacket , 2nd vessel does not have a jacket, max. temperature 100 degr. c., with motor 1,1 kw, 230/400 volt, with variable speed drive, rotor speed 0-6000 rpm, floorspace 0,6x0,5 m, total height 0,6 m, weight 80 kghot mixersplastic machinery > hot mixers HOT MIXER (1X), MATERIAL STAINLESS STEEL, CAPACITY 0,75-2,25 LTR, VESSEL SIZES DIA. 155X150MM, WITH JACKET , 2ND VESSEL DOES NOT HAVE A JACKET, MAX. TEMPERATURE 100 DEGR. C., WITH MOTOR 1,1 KW, 230/400 VOLT, WITH VARIABLE SPEED DRIVE, ROTOR SPEED 0-6000 RPM, FLOORSPACE 0,6X0,5 M, TOTAL HEIGHT 0,6 M, WEIGHT 80 KGHOT MIXERSPLASTIC MACHINERY > HOT MIXERS
Vendedor: Foeth
Año de construcción: usado
Precio: 4.850 €
Ubicación: Land-mado mtk661 table cutter
capacity: 13 litres
completely in stainless steel
2 courses
3 cutter head
machine must be thoroughly cleaned prior to use
pointer thermometer hole in the lid there is missing,

machine is running properly and quietly

video about test run and more pictures available
 MADO MTK661 TABLE CUTTER CAPACITY: 13 LITRES COMPLETELY IN STAINLESS STEEL 2 COURSES 3 CUTTER HEAD MACHINE MUST BE THOROUGHLY CLEANED PRIOR TO USE POINTER THERMOMETER HOLE IN THE LID THERE IS MISSING, MACHINE IS RUNNING PROPERLY AND QUIETLY VIDEO ABOUT TEST RUN AND MORE PICTURES AVAILABLE
Vendedor: Statt Nahrungsmittelmaschinen
Año de construcción: usado
Ubicación: Land-working width: 3200 mm<br/>roller width: 3400 mm<br/>pressure: 70 t<br/>pressure line: 205 n / mm<br/>number of rollers: 2 stück<br/>upper roll: 460 dia<br/>roller covering: stahl -schreinergravur <br/>heating - upper roll: thermo-Öl <br/>lower roll: s-walze <br/>roller covering: mit flexroll-manchon <br/>diameter of lower rolls: 500 dia<br/>clouth speed: 8 - 100 m/min<br/>main drive motor: 32 kw<br/>heating - upper roll: 65 kw<br/>voltage: 380 v / 50 hz<br/>current capacity: 125 kw<br/>weight: 18 to<br/>dimensions of the machine ca.: 6,0 x 6,0 x 3,0 m<br/>?2-bowl-calender with heatable steel roll and s-roll with flexroll-sleeve,<br/>?electrical steam heating for steel roll,<br/>?inlet with metal detector and e+l edge guider,<br/>?inlet and outlet motorical driven for big batches,<br/>?2 cooling rolls at the outlet,<br/><br/>the calender is in a good condition and has operated pretty less working hours.<br/><br/><br/><br/><br/> WORKING WIDTH: 3200 MM
ROLLER WIDTH: 3400 MM
PRESSURE: 70 T
PRESSURE LINE: 205 N / MM
NUMBER OF ROLLERS: 2 STüCK
UPPER ROLL: 460 DIA
ROLLER COVERING: STAHL -SCHREINERGRAVUR
HEATING - UPPER ROLL: THERMO-ÖL
LOWER ROLL: S-WALZE
ROLLER COVERING: MIT FLEXROLL-MANCHON
DIAMETER OF LOWER ROLLS: 500 DIA
CLOUTH SPEED: 8 - 100 M/MIN
MAIN DRIVE MOTOR: 32 KW
HEATING - UPPER ROLL: 65 KW
VOLTAGE: 380 V / 50 HZ
CURRENT CAPACITY: 125 KW
WEIGHT: 18 TO
DIMENSIONS OF THE MACHINE CA.: 6,0 X 6,0 X 3,0 M
?2-BOWL-CALENDER WITH HEATABLE STEEL ROLL AND S-ROLL WITH FLEXROLL-SLEEVE,
?ELECTRICAL STEAM HEATING FOR STEEL ROLL,
?INLET WITH METAL DETECTOR AND E+L EDGE GUIDER,
?INLET AND OUTLET MOTORICAL DRIVEN FOR BIG BATCHES,
?2 COOLING ROLLS AT THE OUTLET,

THE CALENDER IS IN A GOOD CONDITION AND HAS OPERATED PRETTY LESS WORKING HOURS.




Vendedor: FEYEN Maschinen GmbH
Año de construcción: usado
Ubicación: Land-package two cylinder

illig msz 600 year : 2008

illig msz 600 year : 2004

 

price for package 6000,00€ loaded on truck

 

 

for more information, do not hesitate to contact us snvimachinery@gmail 

 


 

mathieu moise

snvi energy graphic sasu
siège social : 22 rue du camp - 93230 romainville - france
siret 83067130100018 - r.c.s. bobigny
0033688070964
 PACKAGE TWO CYLINDER ILLIG MSZ 600 YEAR : 2008 ILLIG MSZ 600 YEAR : 2004 PRICE FOR PACKAGE 6000,00€ LOADED ON TRUCK FOR MORE INFORMATION, DO NOT HESITATE TO CONTACT US SNVIMACHINERY@GMAIL MATHIEU MOISE SNVI ENERGY GRAPHIC SASU SIèGE SOCIAL : 22 RUE DU CAMP - 93230 ROMAINVILLE - FRANCE SIRET 83067130100018 - R.C.S. BOBIGNY 0033688070964
Vendedor: SNVI ENERGY
Año de construcción: usado
Ubicación: Land-air volume: 30 m³/h<br/>temperature max.: 150 ° c<br/>material hopper volume: 60 l<br/>dew point of the dry air: -70 ° c<br/>blower power: 0,4 kw<br/>heating capacity: 2 kw<br/>connected load: 4,5 kw<br/>dimension l x w x h: 1.000 x 660 x 1.700 mm<br/>weight: 98 + 65 kg<br/>supply voltage: 400v/ 50 hz <br/>painting: edelstahl / engel grün <br/>techn. data      : according to the data sheet:  <br/>condition        : as good as new:  <br/>:  <br/>mobile dehumidifying dryer,<br/>equipped with:<br/>- 80 l stainless steel  hopper + visualized temperature display<br/>- hopper supporting frame with wheels<br/>- insulated suction box<br/><br/>fair unit as well<br/><br/>the technology used for this series of dryers is based on the x dryer: this <br/>means high performance with efficiency up to -70°c dew point. the special <br/>thermodynamic design uses zeolite with low energy consumption and high <br/>throughput efficiency. a powerful microprocessor controls the sincro range. <br/>the sx dryers use solid state relays and adjustable pid temperature control, <br/>they do not use compressed air or cooling water. master 200 completes the <br/>equipment and simplifies the user interface.<br/><br/><br/><br/><br/> AIR VOLUME: 30 M³/H
TEMPERATURE MAX.: 150 ° C
MATERIAL HOPPER VOLUME: 60 L
DEW POINT OF THE DRY AIR: -70 ° C
BLOWER POWER: 0,4 KW
HEATING CAPACITY: 2 KW
CONNECTED LOAD: 4,5 KW
DIMENSION L X W X H: 1.000 X 660 X 1.700 MM
WEIGHT: 98 + 65 KG
SUPPLY VOLTAGE: 400V/ 50 HZ
PAINTING: EDELSTAHL / ENGEL GRüN
TECHN. DATA : ACCORDING TO THE DATA SHEET:
CONDITION : AS GOOD AS NEW:
:
MOBILE DEHUMIDIFYING DRYER,
EQUIPPED WITH:
- 80 L STAINLESS STEEL HOPPER + VISUALIZED TEMPERATURE DISPLAY
- HOPPER SUPPORTING FRAME WITH WHEELS
- INSULATED SUCTION BOX

FAIR UNIT AS WELL

THE TECHNOLOGY USED FOR THIS SERIES OF DRYERS IS BASED ON THE X DRYER: THIS
MEANS HIGH PERFORMANCE WITH EFFICIENCY UP TO -70°C DEW POINT. THE SPECIAL
THERMODYNAMIC DESIGN USES ZEOLITE WITH LOW ENERGY CONSUMPTION AND HIGH
THROUGHPUT EFFICIENCY. A POWERFUL MICROPROCESSOR CONTROLS THE SINCRO RANGE.
THE SX DRYERS USE SOLID STATE RELAYS AND ADJUSTABLE PID TEMPERATURE CONTROL,
THEY DO NOT USE COMPRESSED AIR OR COOLING WATER. MASTER 200 COMPLETES THE
EQUIPMENT AND SIMPLIFIES THE USER INTERFACE.




Vendedor: NORTEC MASCHINENTECHNIK GMBH
Año de construcción: usado
Precio: 172.425 €
Ubicación: Land-1006 kva generator (hood unit) performance: 1006 kva / 805 kw prp
operating mode: 1500 r.p.m
voltage: 400 v / 230 v
available voltages: 230 230 / 132 v
power factor: cos phi 0.8

engine:
engine manufacturer: mtu
engine model: 16v2000g26f
engine type: four-stroke diesel
type of injection: direct
kind of aspiration: turbocharger and subsequent cooling
cylinder, number and layout: 16-v
total displacement: 35.7 l
cooling system: water
specifications engine oil: acea e4, e6, e7, e9
fuel consumption 100% prp: 197,66 l / h
fuel consumption 75% prp: 150.58 l / h
fuel consumption 50% prp: 140,52 l / h
oil consumption under full load: 0.8% of fuel consumption
controls: electronic

exhaust pipe outside diameter: 200 mm

alternator:
builder: manufacturer: stamford
poles: 4
connection type (default): star - series
clutch type: s-0 18 "
insulation protection class: class h
mechanical protection type (acc. to iec-34-5): ip 23
control system: selbsterregt, without brushes
voltage regulator: a.v.r. (electronic)
type of mount: putaway execution
coupling system: flexible disk

fuel system: fuel type: diesel
fuel tank: 1000 l
autonomy: 7 hours

dimensions and weight:
length: 5960 mm
height: 2856 mm
width: 2622 mm
: weight 10660
sound pressure level: 83 +/-2.4 db(a) at 7 m

control m5:
manual control panel with digital auto-start and four - or double pole thermomagnetic circuit breaker (depending on the voltage), as well as differential relay. digital control unit cem7

optional (not included): automatic control panel with switching and network management. on the power unit and the control panel is displayed. digital control unit cem7 + cec7

#stromaggregat #stromerzeuger #notstromaggregat #aggregat #genset #generator #alternator #netzersatz #nea #haubenaggregat #haube #hoods #himoinsa #dieselnotstrom #dieselnotstromaggregat #aggregat       1006 KVA GENERATOR (HOOD UNIT) PERFORMANCE: 1006 KVA / 805 KW PRP OPERATING MODE: 1500 R.P.M VOLTAGE: 400 V / 230 V AVAILABLE VOLTAGES: 230 230 / 132 V POWER FACTOR: COS PHI 0.8 ENGINE: ENGINE MANUFACTURER: MTU ENGINE MODEL: 16V2000G26F ENGINE TYPE: FOUR-STROKE DIESEL TYPE OF INJECTION: DIRECT KIND OF ASPIRATION: TURBOCHARGER AND SUBSEQUENT COOLING CYLINDER, NUMBER AND LAYOUT: 16-V TOTAL DISPLACEMENT: 35.7 L COOLING SYSTEM: WATER SPECIFICATIONS ENGINE OIL: ACEA E4, E6, E7, E9 FUEL CONSUMPTION 100% PRP: 197,66 L / H FUEL CONSUMPTION 75% PRP: 150.58 L / H FUEL CONSUMPTION 50% PRP: 140,52 L / H OIL CONSUMPTION UNDER FULL LOAD: 0.8% OF FUEL CONSUMPTION CONTROLS: ELECTRONIC EXHAUST PIPE OUTSIDE DIAMETER: 200 MM ALTERNATOR: BUILDER: MANUFACTURER: STAMFORD POLES: 4 CONNECTION TYPE (DEFAULT): STAR - SERIES CLUTCH TYPE: S-0 18 " INSULATION PROTECTION CLASS: CLASS H MECHANICAL PROTECTION TYPE (ACC. TO IEC-34-5): IP 23 CONTROL SYSTEM: SELBSTERREGT, WITHOUT BRUSHES VOLTAGE REGULATOR: A.V.R. (ELECTRONIC) TYPE OF MOUNT: PUTAWAY EXECUTION COUPLING SYSTEM: FLEXIBLE DISK FUEL SYSTEM: FUEL TYPE: DIESEL FUEL TANK: 1000 L AUTONOMY: 7 HOURS DIMENSIONS AND WEIGHT: LENGTH: 5960 MM HEIGHT: 2856 MM WIDTH: 2622 MM : WEIGHT 10660 SOUND PRESSURE LEVEL: 83 +/-2.4 DB(A) AT 7 M CONTROL M5: MANUAL CONTROL PANEL WITH DIGITAL AUTO-START AND FOUR - OR DOUBLE POLE THERMOMAGNETIC CIRCUIT BREAKER (DEPENDING ON THE VOLTAGE), AS WELL AS DIFFERENTIAL RELAY. DIGITAL CONTROL UNIT CEM7 OPTIONAL (NOT INCLUDED): AUTOMATIC CONTROL PANEL WITH SWITCHING AND NETWORK MANAGEMENT. ON THE POWER UNIT AND THE CONTROL PANEL IS DISPLAYED. DIGITAL CONTROL UNIT CEM7 + CEC7 #STROMAGGREGAT #STROMERZEUGER #NOTSTROMAGGREGAT #AGGREGAT #GENSET #GENERATOR #ALTERNATOR #NETZERSATZ #NEA #HAUBENAGGREGAT #HAUBE #HOODS #HIMOINSA #DIESELNOTSTROM #DIESELNOTSTROMAGGREGAT #AGGREGAT
Vendedor: H & N Energien GmbH
Año de construcción: usado
Ubicación: Land-air volume: 120 m³/h<br/>blower power: 2,1 kw<br/>: 2 stck/ pices<br/>temperature range: 70 - 150 °c<br/>dew point of the dry air: -75 ° c<br/>connected load: 9,2 kw<br/>adapter Ø: 50 mm<br/>supply voltage 3x400 v, with neutral wire (n) 50 c:  <br/>range l-w-h: 491 x 861 x 1.276 mm<br/>weight of the machine ca.: 170 kg<br/>condition     : fair machine:  <br/>techn. data      : according to the data sheet:  <br/>:  <br/>the technology used for this series of dryers is based on the x dryer: this means high performance with efficiency up to -70°c dew point. the special thermodynamic design uses zeolite with low energy consumption and high throughput efficiency. a powerful microprocessor controls the sincro range. the sx dryers use solid state relays and adjustable pid temperature control, they do not use compressed air or cooling water. master 200 completes the equipment and simplifies the user interface.<br/><br/><br/><br/> AIR VOLUME: 120 M³/H
BLOWER POWER: 2,1 KW
: 2 STCK/ PICES
TEMPERATURE RANGE: 70 - 150 °C
DEW POINT OF THE DRY AIR: -75 ° C
CONNECTED LOAD: 9,2 KW
ADAPTER Ø: 50 MM
SUPPLY VOLTAGE 3X400 V, WITH NEUTRAL WIRE (N) 50 C:
RANGE L-W-H: 491 X 861 X 1.276 MM
WEIGHT OF THE MACHINE CA.: 170 KG
CONDITION : FAIR MACHINE:
TECHN. DATA : ACCORDING TO THE DATA SHEET:
:
THE TECHNOLOGY USED FOR THIS SERIES OF DRYERS IS BASED ON THE X DRYER: THIS MEANS HIGH PERFORMANCE WITH EFFICIENCY UP TO -70°C DEW POINT. THE SPECIAL THERMODYNAMIC DESIGN USES ZEOLITE WITH LOW ENERGY CONSUMPTION AND HIGH THROUGHPUT EFFICIENCY. A POWERFUL MICROPROCESSOR CONTROLS THE SINCRO RANGE. THE SX DRYERS USE SOLID STATE RELAYS AND ADJUSTABLE PID TEMPERATURE CONTROL, THEY DO NOT USE COMPRESSED AIR OR COOLING WATER. MASTER 200 COMPLETES THE EQUIPMENT AND SIMPLIFIES THE USER INTERFACE.



Vendedor: NORTEC MASCHINENTECHNIK GMBH
Año de construcción: usado
Precio: 163.344 €
Ubicación: Land-unit 906 kva (hood unit) power: kva 906 / 725 kw prp
operating mode: 1500 r.p.m
voltage: 400 v / 230 v
available voltages: 230 230 / 132 v
power factor: cos phi 0.8

engine:
engine manufacturer: mtu
engine model: 16v2000g16f
engine type: four-stroke diesel
type of injection: direct
kind of aspiration: turbocharger and subsequent cooling
cylinder, number and layout: 16-v
total displacement: 35.7 l
cooling system: water
specifications engine oil: acea e4, e6, e7, e9
fuel consumption 100% prp: 179,94 l / h
fuel consumption 75% prp: 137,07 l / h
fuel consumption 50% prp: 95,60 l / h
oil consumption under full load: 0.8% of fuel consumption
controls: electronic

exhaust pipe outside diameter: 200 mm

alternator:
builder: manufacturer: stamford
poles: 4
connection type (default): star - series
clutch type: s-0 18 "
insulation protection class: class h
mechanical protection type (acc. to iec-34-5): ip 23
control system: selbsterregt, without brushes
voltage regulator: a.v.r. (electronic)
type of mount: putaway execution
coupling system: flexible disk

fuel system: fuel type: diesel
fuel tank: 1000 l
autonomy: 7 hours

dimensions and weight:
length: 5960 mm
height: 2856 mm
width: 2622 mm
: weight 10495
sound pressure level: 92 +/-2.4 db(a) at 7 m

control m5:
manual control panel with digital auto-start and four - or double pole thermomagnetic circuit breaker (depending on the voltage), as well as differential relay. digital control unit cem7

optional (not included): automatic control panel with switching and network management. on the power unit and the control panel is displayed. digital control unit cem7 + cec7

#stromaggregat #stromerzeuger #notstromaggregat #aggregat #genset #generator #alternator #netzersatz #nea #haubenaggregat #haube #hoods #himoinsa #dieselnotstrom #dieselnotstromaggregat #aggregat       UNIT 906 KVA (HOOD UNIT) POWER: KVA 906 / 725 KW PRP OPERATING MODE: 1500 R.P.M VOLTAGE: 400 V / 230 V AVAILABLE VOLTAGES: 230 230 / 132 V POWER FACTOR: COS PHI 0.8 ENGINE: ENGINE MANUFACTURER: MTU ENGINE MODEL: 16V2000G16F ENGINE TYPE: FOUR-STROKE DIESEL TYPE OF INJECTION: DIRECT KIND OF ASPIRATION: TURBOCHARGER AND SUBSEQUENT COOLING CYLINDER, NUMBER AND LAYOUT: 16-V TOTAL DISPLACEMENT: 35.7 L COOLING SYSTEM: WATER SPECIFICATIONS ENGINE OIL: ACEA E4, E6, E7, E9 FUEL CONSUMPTION 100% PRP: 179,94 L / H FUEL CONSUMPTION 75% PRP: 137,07 L / H FUEL CONSUMPTION 50% PRP: 95,60 L / H OIL CONSUMPTION UNDER FULL LOAD: 0.8% OF FUEL CONSUMPTION CONTROLS: ELECTRONIC EXHAUST PIPE OUTSIDE DIAMETER: 200 MM ALTERNATOR: BUILDER: MANUFACTURER: STAMFORD POLES: 4 CONNECTION TYPE (DEFAULT): STAR - SERIES CLUTCH TYPE: S-0 18 " INSULATION PROTECTION CLASS: CLASS H MECHANICAL PROTECTION TYPE (ACC. TO IEC-34-5): IP 23 CONTROL SYSTEM: SELBSTERREGT, WITHOUT BRUSHES VOLTAGE REGULATOR: A.V.R. (ELECTRONIC) TYPE OF MOUNT: PUTAWAY EXECUTION COUPLING SYSTEM: FLEXIBLE DISK FUEL SYSTEM: FUEL TYPE: DIESEL FUEL TANK: 1000 L AUTONOMY: 7 HOURS DIMENSIONS AND WEIGHT: LENGTH: 5960 MM HEIGHT: 2856 MM WIDTH: 2622 MM : WEIGHT 10495 SOUND PRESSURE LEVEL: 92 +/-2.4 DB(A) AT 7 M CONTROL M5: MANUAL CONTROL PANEL WITH DIGITAL AUTO-START AND FOUR - OR DOUBLE POLE THERMOMAGNETIC CIRCUIT BREAKER (DEPENDING ON THE VOLTAGE), AS WELL AS DIFFERENTIAL RELAY. DIGITAL CONTROL UNIT CEM7 OPTIONAL (NOT INCLUDED): AUTOMATIC CONTROL PANEL WITH SWITCHING AND NETWORK MANAGEMENT. ON THE POWER UNIT AND THE CONTROL PANEL IS DISPLAYED. DIGITAL CONTROL UNIT CEM7 + CEC7 #STROMAGGREGAT #STROMERZEUGER #NOTSTROMAGGREGAT #AGGREGAT #GENSET #GENERATOR #ALTERNATOR #NETZERSATZ #NEA #HAUBENAGGREGAT #HAUBE #HOODS #HIMOINSA #DIESELNOTSTROM #DIESELNOTSTROMAGGREGAT #AGGREGAT
Vendedor: H & N Energien GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: bürkle, year: 1997, type: btf 1426, work piece width min-max mm: 1100, min.-max. workpiece length in mm: 2350, min.-max. workpiece height in mm: 6-35, working widht max mm: 1180 x 2430, heating system: thermoöl, heating power in kw: 25, foil magazin spaces: 10, placing table: 3, through running machine: yes, folienschneideeinrichtung: yes, through running machine: yes, year :1997 MANUFACTURER: BüRKLE, YEAR: 1997, TYPE: BTF 1426, WORK PIECE WIDTH MIN-MAX MM: 1100, MIN.-MAX. WORKPIECE LENGTH IN MM: 2350, MIN.-MAX. WORKPIECE HEIGHT IN MM: 6-35, WORKING WIDHT MAX MM: 1180 X 2430, HEATING SYSTEM: THERMOöL, HEATING POWER IN KW: 25, FOIL MAGAZIN SPACES: 10, PLACING TABLE: 3, THROUGH RUNNING MACHINE: YES, FOLIENSCHNEIDEEINRICHTUNG: YES, THROUGH RUNNING MACHINE: YES, YEAR :1997
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more THERMO types: