1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-technical data:
	
-pressure capacity 500 kn
	-hub infinitely adjustable 10-32 mm - stroke number 22-27 1/min
	-unloading 510 mm
	-height 350 mm
	-drive 400 v / 4 kw
	-punch for example up to 27 mm ã? in steel 14 mm
	-with sonderstanzsattel such as up to 39 mm ã? in steel 9.5 mm
	-for example up to 90 mm ã? in steel 4 mm
	-space requirement approx.	 b h 700 x 1700 x 1200 mm
	-weight approx.					1150 kg
	-with:-hydr. low grain search device
			-stop table with adjustable stops.
-foot switch
emergency stop button
-drawer cabinet with various hole punches with matrices
 TECHNICAL DATA: -PRESSURE CAPACITY 500 KN -HUB INFINITELY ADJUSTABLE 10-32 MM - STROKE NUMBER 22-27 1/MIN -UNLOADING 510 MM -HEIGHT 350 MM -DRIVE 400 V / 4 KW -PUNCH FOR EXAMPLE UP TO 27 MM Ã? IN STEEL 14 MM -WITH SONDERSTANZSATTEL SUCH AS UP TO 39 MM Ã? IN STEEL 9.5 MM -FOR EXAMPLE UP TO 90 MM Ã? IN STEEL 4 MM -SPACE REQUIREMENT APPROX. B H 700 X 1700 X 1200 MM -WEIGHT APPROX. 1150 KG -WITH:-HYDR. LOW GRAIN SEARCH DEVICE -STOP TABLE WITH ADJUSTABLE STOPS. -FOOT SWITCH EMERGENCY STOP BUTTON -DRAWER CABINET WITH VARIOUS HOLE PUNCHES WITH MATRICES
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-make azo gmbh + co. osterburken, type behälter d1104 + vb-800 a21, no 404318, new 2003, silo (1x), closed , capacity 4000 ltr, material stainless steel (304), diameter 1100mm, cylindrical height 3000mm, conical bottom 350mm, top connections dia. 300mm + dia. 315mm, outlet with vibro bottom type vb-800 (motor 0,4 kw, 400 volt), outlet dia. 200mm, floorspace 1,8x1,8 m, total height 5,0 msilostanks > silos what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE AZO GMBH + CO. OSTERBURKEN, TYPE BEHäLTER D1104 + VB-800 A21, NO 404318, NEW 2003, SILO (1X), CLOSED , CAPACITY 4000 LTR, MATERIAL STAINLESS STEEL (304), DIAMETER 1100MM, CYLINDRICAL HEIGHT 3000MM, CONICAL BOTTOM 350MM, TOP CONNECTIONS DIA. 300MM + DIA. 315MM, OUTLET WITH VIBRO BOTTOM TYPE VB-800 (MOTOR 0,4 KW, 400 VOLT), OUTLET DIA. 200MM, FLOORSPACE 1,8X1,8 M, TOTAL HEIGHT 5,0 MSILOSTANKS > SILOS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-technical data:

-maximum working width 3050 mm - max cutting capacity st 40 6 mm
	-angle adjustable mot.			      0.5-3 â°
-cut gap adjustment by hand
-number of hydraulic hold-down device 18 pcs
	-mot. -rear gauge 10-750 mm
-front angle stop + support arms
	-stroke rate depending on the cutting angle and cutting length 9-17 per/min
	-hydraulic drive 400 v / 7.5 kw
	-table height 770 mm
-space requirement incl. backgauge, without front support arms
	-about 	       b h 3750 x 1600 x 1650 mm
	-weight approx.				  	 4500 kg
	-with: - e - foot - switch
			-cutting line illumination
 TECHNICAL DATA: -MAXIMUM WORKING WIDTH 3050 MM - MAX CUTTING CAPACITY ST 40 6 MM -ANGLE ADJUSTABLE MOT. 0.5-3 ° -CUT GAP ADJUSTMENT BY HAND -NUMBER OF HYDRAULIC HOLD-DOWN DEVICE 18 PCS -MOT. -REAR GAUGE 10-750 MM -FRONT ANGLE STOP + SUPPORT ARMS -STROKE RATE DEPENDING ON THE CUTTING ANGLE AND CUTTING LENGTH 9-17 PER/MIN -HYDRAULIC DRIVE 400 V / 7.5 KW -TABLE HEIGHT 770 MM -SPACE REQUIREMENT INCL. BACKGAUGE, WITHOUT FRONT SUPPORT ARMS -ABOUT B H 3750 X 1600 X 1650 MM -WEIGHT APPROX. 4500 KG -WITH: - E - FOOT - SWITCH -CUTTING LINE ILLUMINATION
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-make coti srl curnasco, no 205, new 1999, floorspace 2,8x2,8 m, reactor (1x), material stainless steel (304), capacity 12.520 ltr, vessel sizes dia. 2200x2400mm, dished bottom , dished top side , manhole dia. 250mm, top connections (10), outlet dia. 100mm, working pressure vac/3 bar, test pressure 4,5 bar, half coil jacketed (450 ltr), working pressure 4 bar, test pressure 6,5 bar, max. temperature 150 degr. c., with gate type stirrer equipped with scrapers (motor 22 kw), with paddle stirrer /screw ribbon stirrer type dm 1250/300, motor 90,0 kw, 380 volt (ex), total height 6,0 mreactorsreactors > reactors what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE COTI SRL CURNASCO, NO 205, NEW 1999, FLOORSPACE 2,8X2,8 M, REACTOR (1X), MATERIAL STAINLESS STEEL (304), CAPACITY 12.520 LTR, VESSEL SIZES DIA. 2200X2400MM, DISHED BOTTOM , DISHED TOP SIDE , MANHOLE DIA. 250MM, TOP CONNECTIONS (10), OUTLET DIA. 100MM, WORKING PRESSURE VAC/3 BAR, TEST PRESSURE 4,5 BAR, HALF COIL JACKETED (450 LTR), WORKING PRESSURE 4 BAR, TEST PRESSURE 6,5 BAR, MAX. TEMPERATURE 150 DEGR. C., WITH GATE TYPE STIRRER EQUIPPED WITH SCRAPERS (MOTOR 22 KW), WITH PADDLE STIRRER /SCREW RIBBON STIRRER TYPE DM 1250/300, MOTOR 90,0 KW, 380 VOLT (EX), TOTAL HEIGHT 6,0 MREACTORSREACTORS > REACTORS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-technical data:
	 
-saw blade diameter up to 400 mm
-cutting capacity 90 â° round 130 mm
-square 120 mm
-rechteck 300 x 40 mm
-oder 240 x 85 mm
-at 45 â° round 130 mm
-square 110 mm
-rechteck 245 x 40 mm
	-adjustable miter li + re per 0-90 â°
-2 speeds 13 + 26 m / min
-drive: 400 v / 1,2 / 1,8 kw
-feeding speed of the saw blade, hydr. infinitely variable
-vertical metal voltage + 1 horizontal metal tensioner - coolant system - original removal-roller conveyor right with maã? stop approx. 		4000 mm
-feed - roller left approx.						2000 mm
	-space requirement approx.	             b h 800 x 1850 x 1100 mm
-weight approx.				  		  850 kg
-machine was overhauled 2014 at profiltec lã¶rrach completely
 TECHNICAL DATA: -SAW BLADE DIAMETER UP TO 400 MM -CUTTING CAPACITY 90 ° ROUND 130 MM -SQUARE 120 MM -RECHTECK 300 X 40 MM -ODER 240 X 85 MM -AT 45 ° ROUND 130 MM -SQUARE 110 MM -RECHTECK 245 X 40 MM -ADJUSTABLE MITER LI + RE PER 0-90 ° -2 SPEEDS 13 + 26 M / MIN -DRIVE: 400 V / 1,2 / 1,8 KW -FEEDING SPEED OF THE SAW BLADE, HYDR. INFINITELY VARIABLE -VERTICAL METAL VOLTAGE + 1 HORIZONTAL METAL TENSIONER - COOLANT SYSTEM - ORIGINAL REMOVAL-ROLLER CONVEYOR RIGHT WITH MA� STOP APPROX. 4000 MM -FEED - ROLLER LEFT APPROX. 2000 MM -SPACE REQUIREMENT APPROX. B H 800 X 1850 X 1100 MM -WEIGHT APPROX. 850 KG -MACHINE WAS OVERHAULED 2014 AT PROFILTEC LöRRACH COMPLETELY
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-type hv-3000, conical mixer (1x), material stainless steel , capacity 3000 ltr, largest cone diameter 2292mm, cone height 3200mm, with stainless steel arm , top drive , motor 5,5 kw, 380 volt, bottom bearing pintle bearing , bottom discharge , outlet with sliding valve , suitable for liquid injection , weight 1200 kg, extra specifications -- brand new conical mixer -- delivery time 20-24 weeks legs can be delivered at extra costs - arm 2 rpm - screw 60 rpmconical mixersmixers > conical mixers what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! TYPE HV-3000, CONICAL MIXER (1X), MATERIAL STAINLESS STEEL , CAPACITY 3000 LTR, LARGEST CONE DIAMETER 2292MM, CONE HEIGHT 3200MM, WITH STAINLESS STEEL ARM , TOP DRIVE , MOTOR 5,5 KW, 380 VOLT, BOTTOM BEARING PINTLE BEARING , BOTTOM DISCHARGE , OUTLET WITH SLIDING VALVE , SUITABLE FOR LIQUID INJECTION , WEIGHT 1200 KG, EXTRA SPECIFICATIONS -- BRAND NEW CONICAL MIXER -- DELIVERY TIME 20-24 WEEKS LEGS CAN BE DELIVERED AT EXTRA COSTS - ARM 2 RPM - SCREW 60 RPMCONICAL MIXERSMIXERS > CONICAL MIXERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-5-colour offset press
heidelberg
sm 102-5-p + l
installed in 2003
72 x 102 cm
only 180 million impressions
cp 2000 remote control center
axiscontrol
preset feeder and delivery.
alcolor vario, combistar can,
ink temperature control, water-cooled,
autoplate, all programs-controlled washers,
tandem washconcept
anilox coater, ir-dryer, drystar combination,
inkline canopen
cleanstar compact, eltex anti-static
extended delivery (x 2), air star,.
perfecting 1-4 / 2-3 / 5-0 5-COLOUR OFFSET PRESS HEIDELBERG SM 102-5-P + L INSTALLED IN 2003 72 X 102 CM ONLY 180 MILLION IMPRESSIONS CP 2000 REMOTE CONTROL CENTER AXISCONTROL PRESET FEEDER AND DELIVERY. ALCOLOR VARIO, COMBISTAR CAN, INK TEMPERATURE CONTROL, WATER-COOLED, AUTOPLATE, ALL PROGRAMS-CONTROLLED WASHERS, TANDEM WASHCONCEPT ANILOX COATER, IR-DRYER, DRYSTAR COMBINATION, INKLINE CANOPEN CLEANSTAR COMPACT, ELTEX ANTI-STATIC EXTENDED DELIVERY (X 2), AIR STAR,. PERFECTING 1-4 / 2-3 / 5-0
Vendedor: DRUPAMA KG (GmbH & Co. KG)
Año de construcción: usado
Ubicación: Land-type hv-1500, conical mixer (1x), material stainless steel , capacity 1500 ltr, largest cone diameter 1753mm, cone height 2500mm, with stainless steel arm , top drive , motor 4 kw, 380 volt, 1400 rpm, bottom bearing pintle bearing , outlet with sliding valve , suitable for liquid injection , extra specifications -- new -- delivery time: 20-24 weeks legs can be delivered at extra costsconical mixersmixers > conical mixers what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! TYPE HV-1500, CONICAL MIXER (1X), MATERIAL STAINLESS STEEL , CAPACITY 1500 LTR, LARGEST CONE DIAMETER 1753MM, CONE HEIGHT 2500MM, WITH STAINLESS STEEL ARM , TOP DRIVE , MOTOR 4 KW, 380 VOLT, 1400 RPM, BOTTOM BEARING PINTLE BEARING , OUTLET WITH SLIDING VALVE , SUITABLE FOR LIQUID INJECTION , EXTRA SPECIFICATIONS -- NEW -- DELIVERY TIME: 20-24 WEEKS LEGS CAN BE DELIVERED AT EXTRA COSTSCONICAL MIXERSMIXERS > CONICAL MIXERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 1.850 €
Ubicación: Land-maximum blade diameter: 350 mm
length stop and roller conveyor on request MAXIMUM BLADE DIAMETER: 350 MM LENGTH STOP AND ROLLER CONVEYOR ON REQUEST
Vendedor: Venker Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-type hv-1000, extra specifications delivery time: 20-24 weeks -- new -- legs can be delivered at extra costs - arm 2 rpm - screw 60 rpm , conical mixer (1x), material stainless steel , capacity 1000 ltr, largest cone diameter 1672 mm, cone height 2184 mm, top drive , motor 3,0 kw, 380 volt, bottom bearing pintle bearing , bottom discharge , suitable for liquid injectionconical mixersmixers > conical mixers what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! TYPE HV-1000, EXTRA SPECIFICATIONS DELIVERY TIME: 20-24 WEEKS -- NEW -- LEGS CAN BE DELIVERED AT EXTRA COSTS - ARM 2 RPM - SCREW 60 RPM , CONICAL MIXER (1X), MATERIAL STAINLESS STEEL , CAPACITY 1000 LTR, LARGEST CONE DIAMETER 1672 MM, CONE HEIGHT 2184 MM, TOP DRIVE , MOTOR 3,0 KW, 380 VOLT, BOTTOM BEARING PINTLE BEARING , BOTTOM DISCHARGE , SUITABLE FOR LIQUID INJECTIONCONICAL MIXERSMIXERS > CONICAL MIXERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-former printing factory, with interior dimensions of approx. 47.7 x 36.3 meters and a usable area of round about 1.730 square metres, up for immediate deconstruction. in its second life cycle, this hall could serve to establish a factory, workshop, warehouse, etc.. 

structural steel work: the roof structure consists of hot-rolled and primed / coated steel frames based on supports made of reinforced concrete. the longitudinal stiffness of the hall we by wind bracings in the roof level and vertical bracings in the side walls. the roof substructure consists from trapezoidal load bearing steel panels.

approximate dimensions: 
width of the hall: approx. 36.30 meters inner wall; 
hall length: approx. 47.70 meters inner wall; 
clear height: 5.05 meters to the lowest steel beams; 
eave height: 4.50 m / 5.25 meters; 
building height: approx. 9.00 meters at the roof top; 
 
roof cladding: 
bituminous membrane, insulation, load bearing panels made of profiled sheet steel; 
wall cladding: the facade of the building consists of 30x75cm light concrete slabs. 
 
location: berlin. visit by appointment. 
documentation: the construction documents are being searched for in the archive of building authority. 

availability: april / may 2019.  

export-price: on written request with full company details.   FORMER PRINTING FACTORY, WITH INTERIOR DIMENSIONS OF APPROX. 47.7 X 36.3 METERS AND A USABLE AREA OF ROUND ABOUT 1.730 SQUARE METRES, UP FOR IMMEDIATE DECONSTRUCTION. IN ITS SECOND LIFE CYCLE, THIS HALL COULD SERVE TO ESTABLISH A FACTORY, WORKSHOP, WAREHOUSE, ETC.. STRUCTURAL STEEL WORK: THE ROOF STRUCTURE CONSISTS OF HOT-ROLLED AND PRIMED / COATED STEEL FRAMES BASED ON SUPPORTS MADE OF REINFORCED CONCRETE. THE LONGITUDINAL STIFFNESS OF THE HALL WE BY WIND BRACINGS IN THE ROOF LEVEL AND VERTICAL BRACINGS IN THE SIDE WALLS. THE ROOF SUBSTRUCTURE CONSISTS FROM TRAPEZOIDAL LOAD BEARING STEEL PANELS. APPROXIMATE DIMENSIONS: WIDTH OF THE HALL: APPROX. 36.30 METERS INNER WALL; HALL LENGTH: APPROX. 47.70 METERS INNER WALL; CLEAR HEIGHT: 5.05 METERS TO THE LOWEST STEEL BEAMS; EAVE HEIGHT: 4.50 M / 5.25 METERS; BUILDING HEIGHT: APPROX. 9.00 METERS AT THE ROOF TOP; ROOF CLADDING: BITUMINOUS MEMBRANE, INSULATION, LOAD BEARING PANELS MADE OF PROFILED SHEET STEEL; WALL CLADDING: THE FACADE OF THE BUILDING CONSISTS OF 30X75CM LIGHT CONCRETE SLABS. LOCATION: BERLIN. VISIT BY APPOINTMENT. DOCUMENTATION: THE CONSTRUCTION DOCUMENTS ARE BEING SEARCHED FOR IN THE ARCHIVE OF BUILDING AUTHORITY. AVAILABILITY: APRIL / MAY 2019. EXPORT-PRICE: ON WRITTEN REQUEST WITH FULL COMPANY DETAILS.
Vendedor: THAL BAUSATZHALLEN
Año de construcción: usado
Ubicación: Land-type hv-600, floor space dia. 1.6 m, total height 3.52 m, extra specifications -- brand new conical mixer -- delivery time: 20-24 weeks legs can be delivered at extra costs , conical mixer (1x), material stainless steel , capacity 600 ltr, largest cone diameter 1492 mm, cone height 1844 mm, top drive , motor 3,0 kw, 400 volt, bottom bearing pintle bearing , bottom discharge , outlet with sliding valve , suitable for liquid injectionconical mixersmixers > conical mixers what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! TYPE HV-600, FLOOR SPACE DIA. 1.6 M, TOTAL HEIGHT 3.52 M, EXTRA SPECIFICATIONS -- BRAND NEW CONICAL MIXER -- DELIVERY TIME: 20-24 WEEKS LEGS CAN BE DELIVERED AT EXTRA COSTS , CONICAL MIXER (1X), MATERIAL STAINLESS STEEL , CAPACITY 600 LTR, LARGEST CONE DIAMETER 1492 MM, CONE HEIGHT 1844 MM, TOP DRIVE , MOTOR 3,0 KW, 400 VOLT, BOTTOM BEARING PINTLE BEARING , BOTTOM DISCHARGE , OUTLET WITH SLIDING VALVE , SUITABLE FOR LIQUID INJECTIONCONICAL MIXERSMIXERS > CONICAL MIXERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-heidelberg xl105-8p5(72 x 105cm), age c.2011, serial no.fs001300, circa 281 million, press centre, alcolor with vario dampening, preset plus feeder, preset plus delivery, autoplate, heidelberg staticstar, technotrans combistar (can) refrig with ink temp control (aircooled), alcosmart azr, ultrasonic two sheet detection, steel plate in feeder and delivery, heidelberg scrollstar, heidelberg cleanstar, heidelberg airstar, programmable roll/bla/imp. cyl. wash via cp2000, heidelberg powderstar ap500 duo plus powder spray, instant gate HEIDELBERG XL105-8P5(72 X 105CM), AGE C.2011, SERIAL NO.FS001300, CIRCA 281 MILLION, PRESS CENTRE, ALCOLOR WITH VARIO DAMPENING, PRESET PLUS FEEDER, PRESET PLUS DELIVERY, AUTOPLATE, HEIDELBERG STATICSTAR, TECHNOTRANS COMBISTAR (CAN) REFRIG WITH INK TEMP CONTROL (AIRCOOLED), ALCOSMART AZR, ULTRASONIC TWO SHEET DETECTION, STEEL PLATE IN FEEDER AND DELIVERY, HEIDELBERG SCROLLSTAR, HEIDELBERG CLEANSTAR, HEIDELBERG AIRSTAR, PROGRAMMABLE ROLL/BLA/IMP. CYL. WASH VIA CP2000, HEIDELBERG POWDERSTAR AP500 DUO PLUS POWDER SPRAY, INSTANT GATE
Vendedor: White Horse Machinery
Año de construcción: usado
Ubicación: Land-type hv-300, new nieuw, weight 650 kg, extra specifications -- brand new conical mixer -- delivery time 20-24 weeks legs can be delivered at extra costs , conical mixer (1x), material stainless steel , capacity 300 ltr., largest cone diameter 1300 mm, cone height 1530 mm, top drive , motor 3 kw, 400 volt, bottom bearing pintle bearing , bottom discharge , outlet with sliding valve , suitable for liquid injectionconical mixersmixers > conical mixers what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! TYPE HV-300, NEW NIEUW, WEIGHT 650 KG, EXTRA SPECIFICATIONS -- BRAND NEW CONICAL MIXER -- DELIVERY TIME 20-24 WEEKS LEGS CAN BE DELIVERED AT EXTRA COSTS , CONICAL MIXER (1X), MATERIAL STAINLESS STEEL , CAPACITY 300 LTR., LARGEST CONE DIAMETER 1300 MM, CONE HEIGHT 1530 MM, TOP DRIVE , MOTOR 3 KW, 400 VOLT, BOTTOM BEARING PINTLE BEARING , BOTTOM DISCHARGE , OUTLET WITH SLIDING VALVE , SUITABLE FOR LIQUID INJECTIONCONICAL MIXERSMIXERS > CONICAL MIXERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-code: 0569
brand: bcr - italy
model: k 75 mri - ce standard 

automatic edge bander for pre-glued edges - ce  standard 

technical data:
edge thickness up to 1,5 mm
panel height 75 mm
end cutter  for automatic starting and cutting of the belt
group of 2 top / bottom trimmers
automatic panel feed driver 
single-phase power supply
heating time 3 min
overall dimensions:  mm 1600 x 650 x 1100 h
weight  kg 160



 CODE: 0569 BRAND: BCR - ITALY MODEL: K 75 MRI - CE STANDARD AUTOMATIC EDGE BANDER FOR PRE-GLUED EDGES - CE STANDARD TECHNICAL DATA: EDGE THICKNESS UP TO 1,5 MM PANEL HEIGHT 75 MM END CUTTER FOR AUTOMATIC STARTING AND CUTTING OF THE BELT GROUP OF 2 TOP / BOTTOM TRIMMERS AUTOMATIC PANEL FEED DRIVER SINGLE-PHASE POWER SUPPLY HEATING TIME 3 MIN OVERALL DIMENSIONS: MM 1600 X 650 X 1100 H WEIGHT KG 160
Vendedor: TOMESANI Srl
Año de construcción: usado
Precio: 17.800 €
Ubicación: Land-: 10 mm<br/>: 3.100 mm<br/>: . 650 mot mm<br/>: 250 mm<br/>: 2 °<br/>: 170 l<br/>: 22 kw<br/>: 3.825 mm<br/>: 1.700 mm<br/>: 2.000 mm<br/>: 9.000 kg<br/>swing beam guillotine shear<br/>mot. back gauge with man. fold up on stop end<br/>manual cutting gap adjustment<br/>cutting line illumination<br/>14. pcs. hyd. hold down clamps<br/>cutting length limitation<br/>workpiece counter<br/>single and continous stroke<br/>footpedal<br/>side lay 1.000 mm with t-slot and scale<br/>3 sheet support arms<br/>finger protection<br/>one set of straight blades fitted in machine<br/>one set upper and lower blades sectioned and ground (2x770mm, 2x780mm)<br/>safety light barrier fiessler on the back side<br/>emergency stop switch<br/>users manual in german<br/><br/>complies with the present industrial safety regulation (amvo &, uvv)<br/><br/>cutting capacity: 10 mm <br/>cutting length: 3.100 mm <br/>back gauge: mot. 650 mm<br/>throat depth: 250 mm<br/>cutting angle: 2°<br/>stroke: 18 1/min.<br/>oil filling: 170 l<br/>motor: 22 kw<br/>length:  3.825 mm  <br/>width: 1.700 mm<br/>heigth: 2.000 mm  <br/>weight: 9.000 kg<br/><br/><br/><br/> : 10 MM
: 3.100 MM
: . 650 MOT MM
: 250 MM
: 2 °
: 170 L
: 22 KW
: 3.825 MM
: 1.700 MM
: 2.000 MM
: 9.000 KG
SWING BEAM GUILLOTINE SHEAR
MOT. BACK GAUGE WITH MAN. FOLD UP ON STOP END
MANUAL CUTTING GAP ADJUSTMENT
CUTTING LINE ILLUMINATION
14. PCS. HYD. HOLD DOWN CLAMPS
CUTTING LENGTH LIMITATION
WORKPIECE COUNTER
SINGLE AND CONTINOUS STROKE
FOOTPEDAL
SIDE LAY 1.000 MM WITH T-SLOT AND SCALE
3 SHEET SUPPORT ARMS
FINGER PROTECTION
ONE SET OF STRAIGHT BLADES FITTED IN MACHINE
ONE SET UPPER AND LOWER BLADES SECTIONED AND GROUND (2X770MM, 2X780MM)
SAFETY LIGHT BARRIER FIESSLER ON THE BACK SIDE
EMERGENCY STOP SWITCH
USERS MANUAL IN GERMAN

COMPLIES WITH THE PRESENT INDUSTRIAL SAFETY REGULATION (AMVO &, UVV)

CUTTING CAPACITY: 10 MM
CUTTING LENGTH: 3.100 MM
BACK GAUGE: MOT. 650 MM
THROAT DEPTH: 250 MM
CUTTING ANGLE: 2°
STROKE: 18 1/MIN.
OIL FILLING: 170 L
MOTOR: 22 KW
LENGTH: 3.825 MM
WIDTH: 1.700 MM
HEIGTH: 2.000 MM
WEIGHT: 9.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-crate unloading and loading system with abb industrial robots

automatic robot packaging system made by sasib in 1998. the system is used for loading bottles in crates with the maximum capacity of 80.000 bph. it includes six floor-mounted robots and a control unit. the robots are made by abb in 1998 and they are refurbished in 2010/2011. production was stopped about one year after this refurbishment and therefore abb robots are in good working order. abb irb 6400 robots have a 6-axis movement, a reach of 2.4 meters and maximum handling capacity of 200 kg. system includes complete conveyor systems and gripping tools for the robots.

system manufacturer: sasib s.p.a., italy
system model: robokombi deca 5-5t
serial number: ibh 005 1226
crate loading capacity: 80 000 bph
crate unloading capacity: 20 000 bph

robot manufacturer: abb robotics products ab, sweden
robot type: irb6400 m97a
version: irb6400/2.4-200
year of manufacture: 1998
number of robots 6 pcs
payload capacity up to 200 kg
serial number: 64-06736
voltage: 3 x 400 v, 50 – 60 hz
electric power: 7.2 kva
maximum reach: 2.4 m
manipulator weight: 2.050 kg
controller weight: 250 kg
axes: 6
axis velocities: 90 – 190 °/s, depending on axis
axis velocity resolution: approx. 0.01 °/s each axis   CRATE UNLOADING AND LOADING SYSTEM WITH ABB INDUSTRIAL ROBOTS AUTOMATIC ROBOT PACKAGING SYSTEM MADE BY SASIB IN 1998. THE SYSTEM IS USED FOR LOADING BOTTLES IN CRATES WITH THE MAXIMUM CAPACITY OF 80.000 BPH. IT INCLUDES SIX FLOOR-MOUNTED ROBOTS AND A CONTROL UNIT. THE ROBOTS ARE MADE BY ABB IN 1998 AND THEY ARE REFURBISHED IN 2010/2011. PRODUCTION WAS STOPPED ABOUT ONE YEAR AFTER THIS REFURBISHMENT AND THEREFORE ABB ROBOTS ARE IN GOOD WORKING ORDER. ABB IRB 6400 ROBOTS HAVE A 6-AXIS MOVEMENT, A REACH OF 2.4 METERS AND MAXIMUM HANDLING CAPACITY OF 200 KG. SYSTEM INCLUDES COMPLETE CONVEYOR SYSTEMS AND GRIPPING TOOLS FOR THE ROBOTS. SYSTEM MANUFACTURER: SASIB S.P.A., ITALY SYSTEM MODEL: ROBOKOMBI DECA 5-5T SERIAL NUMBER: IBH 005 1226 CRATE LOADING CAPACITY: 80 000 BPH CRATE UNLOADING CAPACITY: 20 000 BPH ROBOT MANUFACTURER: ABB ROBOTICS PRODUCTS AB, SWEDEN ROBOT TYPE: IRB6400 M97A VERSION: IRB6400/2.4-200 YEAR OF MANUFACTURE: 1998 NUMBER OF ROBOTS 6 PCS PAYLOAD CAPACITY UP TO 200 KG SERIAL NUMBER: 64-06736 VOLTAGE: 3 X 400 V, 50 – 60 HZ ELECTRIC POWER: 7.2 KVA MAXIMUM REACH: 2.4 M MANIPULATOR WEIGHT: 2.050 KG CONTROLLER WEIGHT: 250 KG AXES: 6 AXIS VELOCITIES: 90 – 190 °/S, DEPENDING ON AXIS AXIS VELOCITY RESOLUTION: APPROX. 0.01 °/S EACH AXIS
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 6.800 €
Ubicación: Land-: 200 mm<br/>: 6 mm<br/>: 4 mm<br/>: 55/ min<br/>: 1.000 x 800 mm<br/>: 480 mm<br/>: 60 l<br/>: 1.000 mm<br/>: 1.860 mm<br/>: 1.500 mm<br/>: 1.200 kg<br/>hydraulic drive<br/>angle adjustment by handwheel<br/>table with t-slots<br/>2 working lamps<br/>material slide<br/>1 downholder<br/>foot pedal<br/>upper and lower blade newly sharpened<br/>no users manual<br/><br/>complies with the current industrial safety regulations (amvo &, uvv)<br/><br/>blade length: 200 mm<br/>cutting capacity (st 42) with cutting angle 60-140°: 6 mm<br/>cutting capacity (st 42) with cutting angle 60-140°: 4 mm<br/>numer of strokes: 55/min<br/>table: 1.000 x 800 mm<br/>adjustable angle stops: 480 mm<br/>oil filling: 60 l<br/>length: 1.000 mm<br/>width: 1.860 mm<br/>height: 1.500 mm<br/>weight: 1.200 kg<br/><br/><br/><br/> : 200 MM
: 6 MM
: 4 MM
: 55/ MIN
: 1.000 X 800 MM
: 480 MM
: 60 L
: 1.000 MM
: 1.860 MM
: 1.500 MM
: 1.200 KG
HYDRAULIC DRIVE
ANGLE ADJUSTMENT BY HANDWHEEL
TABLE WITH T-SLOTS
2 WORKING LAMPS
MATERIAL SLIDE
1 DOWNHOLDER
FOOT PEDAL
UPPER AND LOWER BLADE NEWLY SHARPENED
NO USERS MANUAL

COMPLIES WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO &, UVV)

BLADE LENGTH: 200 MM
CUTTING CAPACITY (ST 42) WITH CUTTING ANGLE 60-140°: 6 MM
CUTTING CAPACITY (ST 42) WITH CUTTING ANGLE 60-140°: 4 MM
NUMER OF STROKES: 55/MIN
TABLE: 1.000 X 800 MM
ADJUSTABLE ANGLE STOPS: 480 MM
OIL FILLING: 60 L
LENGTH: 1.000 MM
WIDTH: 1.860 MM
HEIGHT: 1.500 MM
WEIGHT: 1.200 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-injection molding machine husky hylectric h300 for pet bottle closures
 
two complete pet bottle cap production lines both equipped with husky hylectric h300 injection molding machines. both production lines include italian plastic systems made granule pneumatic transport, mixing and feeding systems as well as green box made cap cooling drums. equipment was manufactured in year 2006 is designed to produce 28 mm pet caps according to standard light bpf 28 mm at speed of 36 000 caps / hour. both machines were stopped in 2014 but are still installed and powered.
 
technical data
 
machine #1 type: husky h300, rs95/80, ser. ?2853225
manufacturing year 2006, total operating hours 44918
mold no1 corvaglia 64 cavity no 28-22-21-1 air cooled

machine #2 type: husky h300, rs80/70, ser. ?3372564
manufacturing year 2006, total operating hours 57790
mold no 2 corvaglia 64 cavity no 103-a-st water cooled

cap format bpf 28 mm
cycle time: 6.3 seconds
capacity 36 000 cap / h
control system: beckfoff industrial pc
mmi polaris ttc 2100 with touch screen   INJECTION MOLDING MACHINE HUSKY HYLECTRIC H300 FOR PET BOTTLE CLOSURES TWO COMPLETE PET BOTTLE CAP PRODUCTION LINES BOTH EQUIPPED WITH HUSKY HYLECTRIC H300 INJECTION MOLDING MACHINES. BOTH PRODUCTION LINES INCLUDE ITALIAN PLASTIC SYSTEMS MADE GRANULE PNEUMATIC TRANSPORT, MIXING AND FEEDING SYSTEMS AS WELL AS GREEN BOX MADE CAP COOLING DRUMS. EQUIPMENT WAS MANUFACTURED IN YEAR 2006 IS DESIGNED TO PRODUCE 28 MM PET CAPS ACCORDING TO STANDARD LIGHT BPF 28 MM AT SPEED OF 36 000 CAPS / HOUR. BOTH MACHINES WERE STOPPED IN 2014 BUT ARE STILL INSTALLED AND POWERED. TECHNICAL DATA MACHINE #1 TYPE: HUSKY H300, RS95/80, SER. ?2853225 MANUFACTURING YEAR 2006, TOTAL OPERATING HOURS 44918 MOLD NO1 CORVAGLIA 64 CAVITY NO 28-22-21-1 AIR COOLED MACHINE #2 TYPE: HUSKY H300, RS80/70, SER. ?3372564 MANUFACTURING YEAR 2006, TOTAL OPERATING HOURS 57790 MOLD NO 2 CORVAGLIA 64 CAVITY NO 103-A-ST WATER COOLED CAP FORMAT BPF 28 MM CYCLE TIME: 6.3 SECONDS CAPACITY 36 000 CAP / H CONTROL SYSTEM: BECKFOFF INDUSTRIAL PC MMI POLARIS TTC 2100 WITH TOUCH SCREEN
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 4.000 €
Ubicación: Land-: 3.050 mm<br/>: 125 to<br/>: 2.550 mm<br/>: 300 mm<br/>: 200 mm<br/>: 100 mm<br/>: 500 mm<br/>: 390 mm<br/>: 180 mm<br/>: 160 mm<br/>: 11 kw<br/>: 3.210 mm<br/>: 1.500 mm<br/>: 2.400 mm<br/>: 8.000 kg<br/>2 mech. stop fingers<br/>anti deflection mechanism by chock<br/>2 sheet support arms<br/>stroke stop display<br/>goose neck upper tool 105 x 30 x 3.000 mm<br/>multi-v lower tool 105 x 100 x 3.000 mm, with 6 v shaped slots<br/>manual back gauge<br/>users manual in german<br/><br/>(sample photo)<br/> <br/>does not comply with the present industrial safety regulation (amvo &, uvv)<br/><br/><br/>maschine necessary to be repaired, with following fault: <br/>synchronisation valve defective,  only approx. 30 mm stroke possible<br/><br/>bending length: 3.050 mm<br/>bending force: 125 to<br/>distance between columns: 2.550 mm<br/>gap: 300 mm<br/>stroke: 200 mm<br/>max. stroke adjustment: 100 mm<br/>man. back gauge: 500 mm<br/>daylight opening: 390 mm<br/>table width: 180 mm<br/>stop fingers height adjustable: 160 mm<br/>speeds of upper beam: 100/7/100 mm/sek<br/>motor power: 11 kw<br/>length: 3.210 mm<br/>width: 1.500 mm<br/>heigth: 2.400 mm<br/>weight: 8.000 kg<br/><br/><br/><br/> : 3.050 MM
: 125 TO
: 2.550 MM
: 300 MM
: 200 MM
: 100 MM
: 500 MM
: 390 MM
: 180 MM
: 160 MM
: 11 KW
: 3.210 MM
: 1.500 MM
: 2.400 MM
: 8.000 KG
2 MECH. STOP FINGERS
ANTI DEFLECTION MECHANISM BY CHOCK
2 SHEET SUPPORT ARMS
STROKE STOP DISPLAY
GOOSE NECK UPPER TOOL 105 X 30 X 3.000 MM
MULTI-V LOWER TOOL 105 X 100 X 3.000 MM, WITH 6 V SHAPED SLOTS
MANUAL BACK GAUGE
USERS MANUAL IN GERMAN

(SAMPLE PHOTO)

DOES NOT COMPLY WITH THE PRESENT INDUSTRIAL SAFETY REGULATION (AMVO &, UVV)


MASCHINE NECESSARY TO BE REPAIRED, WITH FOLLOWING FAULT: 
SYNCHRONISATION VALVE DEFECTIVE,  ONLY APPROX. 30 MM STROKE POSSIBLE

BENDING LENGTH: 3.050 MM
BENDING FORCE: 125 TO
DISTANCE BETWEEN COLUMNS: 2.550 MM
GAP: 300 MM
STROKE: 200 MM
MAX. STROKE ADJUSTMENT: 100 MM
MAN. BACK GAUGE: 500 MM
DAYLIGHT OPENING: 390 MM
TABLE WIDTH: 180 MM
STOP FINGERS HEIGHT ADJUSTABLE: 160 MM
SPEEDS OF UPPER BEAM: 100/7/100 MM/SEK
MOTOR POWER: 11 KW
LENGTH: 3.210 MM
WIDTH: 1.500 MM
HEIGTH: 2.400 MM
WEIGHT: 8.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-pet bottle filling line for beer and csd krones 22 000 bph with mixer

this complete pet bottle filling line was delivered by krones in year 2002 and it was in operation till 2015. the equipment is designed for beer and carbonated soft drinks and it has been filling the product in to 0.5, 1.5 and 2.0 liter pet bottles. line has a soft drink mixer. all equipment has siemens simatic s7 serie plc controls. line is complete with pet compressor and beverage mixer and it is still installed and powered and in good condition.

main characteristics of this line:
manufacturer: krones ag
capacity: 22 000 bph in 1.5 liter pet
20 000 bph in 2.0 liter pet
28 000 bph in 0.5 liter pet
operation started in year: 2002
operation stopped in year: 2015
container sizes used: 0.5, 1.5 and 2.0 liters
neck standard: pco 1810 - 28 mm
labels: film, hot glue, wrap around + front-back-neck
delivery package format: 3 x 4 shrink wrapped   PET BOTTLE FILLING LINE FOR BEER AND CSD KRONES 22 000 BPH WITH MIXER THIS COMPLETE PET BOTTLE FILLING LINE WAS DELIVERED BY KRONES IN YEAR 2002 AND IT WAS IN OPERATION TILL 2015. THE EQUIPMENT IS DESIGNED FOR BEER AND CARBONATED SOFT DRINKS AND IT HAS BEEN FILLING THE PRODUCT IN TO 0.5, 1.5 AND 2.0 LITER PET BOTTLES. LINE HAS A SOFT DRINK MIXER. ALL EQUIPMENT HAS SIEMENS SIMATIC S7 SERIE PLC CONTROLS. LINE IS COMPLETE WITH PET COMPRESSOR AND BEVERAGE MIXER AND IT IS STILL INSTALLED AND POWERED AND IN GOOD CONDITION. MAIN CHARACTERISTICS OF THIS LINE: MANUFACTURER: KRONES AG CAPACITY: 22 000 BPH IN 1.5 LITER PET 20 000 BPH IN 2.0 LITER PET 28 000 BPH IN 0.5 LITER PET OPERATION STARTED IN YEAR: 2002 OPERATION STOPPED IN YEAR: 2015 CONTAINER SIZES USED: 0.5, 1.5 AND 2.0 LITERS NECK STANDARD: PCO 1810 - 28 MM LABELS: FILM, HOT GLUE, WRAP AROUND + FRONT-BACK-NECK DELIVERY PACKAGE FORMAT: 3 X 4 SHRINK WRAPPED
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 19.800 €
Ubicación: Land-: 10 mm<br/>: 3.100 mm<br/>: 1.200 mm<br/>: 1.000 mm<br/>: 200 mm<br/>: 22 kw<br/>: 3.780 mm<br/>: 2.600 mm<br/>: 2.240 mm<br/>: 12.000 kg<br/>swing beam guillotine shear<br/>with digital readout and aut. up lift on end of limit stop<br/>mot. back gauge<br/>cutting length continuously variable<br/>mot. cutting gap adjustment<br/>single and continous stroke + tipp<br/>3 sheet support arms<br/>finger protection<br/>pneumatic sheet support with scrap separator<br/>spare blades<br/>16 pcs. hyd. down holders<br/>users manual in german<br/><br/>complies with the present industrial safety regulation (amvo &, uvv)<br/><br/>cutting capacity: 10 mm<br/>cutting length: 3.100 mm<br/>back gauge mot.: 1.200 mm<br/>side lay: 1.000 mm<br/>throat depth: 200 mm<br/>cutting angle: 1°42´<br/>stroke: 20 1/min.<br/>motor: 22 kw<br/>length: 3.780 mm  <br/>width: 2.600 mm<br/>heigth: 2.240 mm<br/>weight: 12.000 kg<br/><br/><br/><br/> : 10 MM
: 3.100 MM
: 1.200 MM
: 1.000 MM
: 200 MM
: 22 KW
: 3.780 MM
: 2.600 MM
: 2.240 MM
: 12.000 KG
SWING BEAM GUILLOTINE SHEAR
WITH DIGITAL READOUT AND AUT. UP LIFT ON END OF LIMIT STOP
MOT. BACK GAUGE
CUTTING LENGTH CONTINUOUSLY VARIABLE
MOT. CUTTING GAP ADJUSTMENT
SINGLE AND CONTINOUS STROKE + TIPP
3 SHEET SUPPORT ARMS
FINGER PROTECTION
PNEUMATIC SHEET SUPPORT WITH SCRAP SEPARATOR
SPARE BLADES
16 PCS. HYD. DOWN HOLDERS
USERS MANUAL IN GERMAN

COMPLIES WITH THE PRESENT INDUSTRIAL SAFETY REGULATION (AMVO &, UVV)

CUTTING CAPACITY: 10 MM
CUTTING LENGTH: 3.100 MM
BACK GAUGE MOT.: 1.200 MM
SIDE LAY: 1.000 MM
THROAT DEPTH: 200 MM
CUTTING ANGLE: 1°42´
STROKE: 20 1/MIN.
MOTOR: 22 KW
LENGTH: 3.780 MM
WIDTH: 2.600 MM
HEIGTH: 2.240 MM
WEIGHT: 12.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-bottle washing machine khs innoclean ee52/87 s22n, 70 000 bph
 
single end bottle washing machine by khs innoclean, manufactured in year 2000 with two pre-cleaning section, two caustic zones and three fresh water rinsing zones. nominal capacity is 70 000 bph and this machine used for 0.5 liter of glass bottles, but also it can be used for 0.33 liter bottles. the machine is stopped in year 2015 and in 2016 of november will be dismantled and packed.
the equipment is in good condition and ready to delivery.
 
manufacturer: khs
manufacturer type: innoclean ee52/87 s22n
year of manufacturing: 2000
capacity: 70 000 bph
total operating hours: 95 000
control plc: siemens simatic s7
 
general data
 
nominal performance: 70 000 bph
adjustable performance: min / max 25 5000 – 71 500 bph
number of holders of bottle cells total: 327 / 317 pcs.
number of bottle in a row: 52 pcs.
chain step: 135 mm.
magazine step: 87 mm.
number of bottles in the machine: 17 004 pcs.
bottle diameter min / max: 53 – 72,5 mm.
bottle height min / max: 135 – 280 mm.
 
machine size
 
the width of the machine body: 4 834 mm.
machine width (full) (plug-in sieve): 7 970 mm.
length of machine: 16 500 mm.
height of machine: 3 500 mm.
machine empty weight: 64 tons
machine operating weight: 135 tons
number of supports: 41 pcs.
 
consumption figures
 
temperature alkali: 80 °c
water consumption, total: 14,95 m3/h.
heat consumption: 629 kwh
electric connection: 90,3 kw.   BOTTLE WASHING MACHINE KHS INNOCLEAN EE52/87 S22N, 70 000 BPH SINGLE END BOTTLE WASHING MACHINE BY KHS INNOCLEAN, MANUFACTURED IN YEAR 2000 WITH TWO PRE-CLEANING SECTION, TWO CAUSTIC ZONES AND THREE FRESH WATER RINSING ZONES. NOMINAL CAPACITY IS 70 000 BPH AND THIS MACHINE USED FOR 0.5 LITER OF GLASS BOTTLES, BUT ALSO IT CAN BE USED FOR 0.33 LITER BOTTLES. THE MACHINE IS STOPPED IN YEAR 2015 AND IN 2016 OF NOVEMBER WILL BE DISMANTLED AND PACKED. THE EQUIPMENT IS IN GOOD CONDITION AND READY TO DELIVERY. MANUFACTURER: KHS MANUFACTURER TYPE: INNOCLEAN EE52/87 S22N YEAR OF MANUFACTURING: 2000 CAPACITY: 70 000 BPH TOTAL OPERATING HOURS: 95 000 CONTROL PLC: SIEMENS SIMATIC S7 GENERAL DATA NOMINAL PERFORMANCE: 70 000 BPH ADJUSTABLE PERFORMANCE: MIN / MAX 25 5000 – 71 500 BPH NUMBER OF HOLDERS OF BOTTLE CELLS TOTAL: 327 / 317 PCS. NUMBER OF BOTTLE IN A ROW: 52 PCS. CHAIN STEP: 135 MM. MAGAZINE STEP: 87 MM. NUMBER OF BOTTLES IN THE MACHINE: 17 004 PCS. BOTTLE DIAMETER MIN / MAX: 53 – 72,5 MM. BOTTLE HEIGHT MIN / MAX: 135 – 280 MM. MACHINE SIZE THE WIDTH OF THE MACHINE BODY: 4 834 MM. MACHINE WIDTH (FULL) (PLUG-IN SIEVE): 7 970 MM. LENGTH OF MACHINE: 16 500 MM. HEIGHT OF MACHINE: 3 500 MM. MACHINE EMPTY WEIGHT: 64 TONS MACHINE OPERATING WEIGHT: 135 TONS NUMBER OF SUPPORTS: 41 PCS. CONSUMPTION FIGURES TEMPERATURE ALKALI: 80 °C WATER CONSUMPTION, TOTAL: 14,95 M3/H. HEAT CONSUMPTION: 629 KWH ELECTRIC CONNECTION: 90,3 KW.
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 15.900 €
Ubicación: Land-: 2.020 mm<br/>: 3,5 mm<br/>: 3+1,5 kw<br/>: 1.000 mm<br/>: 250 mm<br/>: 50 mm<br/>: 2.410 mm<br/>: 1.900 mm<br/>: 1.800 mm<br/>: 2.680 kg<br/>mot. cnc folding machine<br/>positioning control pos 800 b with supporting table and stop area 1.000 mm with bending beam drive on both sides by precision roller chains<br/>1 set high clamping beam rail h 110 mm divided (12 pcs.), total length 2.380 mm<br/>1 pce. straight rail 45° throughout<br/>1 pce. attachment rail 10 mm<br/>1 pce. attachment rail 25 mm<br/>users manual in german (without circuit diagram)<br/><br/>does not comply with the current industrial safety regulations (amvo &, uvv)<br/><br/><br/><br/><br/>bending length: 2.020 mm<br/>bending power: 3,5 mm<br/>motor power: 3+1,5 kw<br/>stop area: 1.000 mm<br/>strop of upper beam rail: 250 mm<br/>bending beam adjustment area: 50 mm<br/>length: 2.410 mm<br/>width: 1.900 mm<br/>height: 1.800 mm<br/>weight: 2.680 kg<br/><br/><br/><br/> : 2.020 MM
: 3,5 MM
: 3+1,5 KW
: 1.000 MM
: 250 MM
: 50 MM
: 2.410 MM
: 1.900 MM
: 1.800 MM
: 2.680 KG
MOT. CNC FOLDING MACHINE
POSITIONING CONTROL POS 800 B WITH SUPPORTING TABLE AND STOP AREA 1.000 MM WITH BENDING BEAM DRIVE ON BOTH SIDES BY PRECISION ROLLER CHAINS
1 SET HIGH CLAMPING BEAM RAIL H 110 MM DIVIDED (12 PCS.), TOTAL LENGTH 2.380 MM
1 PCE. STRAIGHT RAIL 45° THROUGHOUT
1 PCE. ATTACHMENT RAIL 10 MM
1 PCE. ATTACHMENT RAIL 25 MM
USERS MANUAL IN GERMAN (WITHOUT CIRCUIT DIAGRAM)

DOES NOT COMPLY WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO &, UVV)




BENDING LENGTH: 2.020 MM
BENDING POWER: 3,5 MM
MOTOR POWER: 3+1,5 KW
STOP AREA: 1.000 MM
STROP OF UPPER BEAM RAIL: 250 MM
BENDING BEAM ADJUSTMENT AREA: 50 MM
LENGTH: 2.410 MM
WIDTH: 1.900 MM
HEIGHT: 1.800 MM
WEIGHT: 2.680 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-glass bottle filling line 55 000 bph simonazzi / krones for beer with bwm
 
complete returnable glass bottle filling line, nominal capacity of 55 000 bph in 0.5-liter glass bottle. main machinery from krones and simonazzi. the line was installed in 2002 and modernized during the entire time of used, like closed conveyor system in year 2013. empty bottle inspector and level & sealing inspector in year 2007. the line was stopped in year 2014 and it is still installed and powered. line is controlled with siemens simatic s7 plc. equipment is in good condition and very well maintained and it has complete documentation in english.
 
main characteristics of this line
 
main manufacturers krones and sig simonazzi
made in years 2002 - 2007
returnable bottles 0.33 and 0.5 liter glass bottles
product used for beer
capacity 55 000 bph in 0.5 liter bottles
caps crown and ring pull
labels paper front-back-neck
secondary packaging tray format 5 x 4 with shrink plastic  GLASS BOTTLE FILLING LINE 55 000 BPH SIMONAZZI / KRONES FOR BEER WITH BWM COMPLETE RETURNABLE GLASS BOTTLE FILLING LINE, NOMINAL CAPACITY OF 55 000 BPH IN 0.5-LITER GLASS BOTTLE. MAIN MACHINERY FROM KRONES AND SIMONAZZI. THE LINE WAS INSTALLED IN 2002 AND MODERNIZED DURING THE ENTIRE TIME OF USED, LIKE CLOSED CONVEYOR SYSTEM IN YEAR 2013. EMPTY BOTTLE INSPECTOR AND LEVEL & SEALING INSPECTOR IN YEAR 2007. THE LINE WAS STOPPED IN YEAR 2014 AND IT IS STILL INSTALLED AND POWERED. LINE IS CONTROLLED WITH SIEMENS SIMATIC S7 PLC. EQUIPMENT IS IN GOOD CONDITION AND VERY WELL MAINTAINED AND IT HAS COMPLETE DOCUMENTATION IN ENGLISH. MAIN CHARACTERISTICS OF THIS LINE MAIN MANUFACTURERS KRONES AND SIG SIMONAZZI MADE IN YEARS 2002 - 2007 RETURNABLE BOTTLES 0.33 AND 0.5 LITER GLASS BOTTLES PRODUCT USED FOR BEER CAPACITY 55 000 BPH IN 0.5 LITER BOTTLES CAPS CROWN AND RING PULL LABELS PAPER FRONT-BACK-NECK SECONDARY PACKAGING TRAY FORMAT 5 X 4 WITH SHRINK PLASTIC
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-tenoning spindle: 1 st.<br/>number of milling agregates: 4 st.<br/>spindle diameter: 50 mm<br/>weinig unicontrol 6 with cnc spindles<br/>...................................<br/><br/>technical data summary<br/>(possibly additionally included accessories please inquire)<br/>...................................<br/><br/>cut saw<br/>...................................<br/>crosscut saw electronically, horizontally infinitely adjustable<br/>number of tools: 1 pcs.<br/>spindle speed: 3000-6000 rpm<br/>spindle diameter: 40 mm<br/>tool diameter max .: 400 mm<br/>motor power: 3 kw<br/>adjustment radial pneumatically controlled 8 positions<br/>e.g. for edge rounding from above<br/>laser straightening light for detecting the sawing section<br/><br/><br/>length stop cnc controlled<br/>...................................<br/>length 3500 mm<br/>electronic length stop<br/><br/>1. tap and slot spindle<br/>...................................<br/>number of tools: variable, infinitely adjustable, cnc<br/>tool clamping length: 320 mm<br/>spindle stroke vertical: variable, adjustment stepless, cnc<br/>spindle speed: 3500 rpm<br/>spindle diameter: 50 mm<br/>tool diameter max .: 320 mm<br/>engine power: 11 kw<br/><br/>1. profiling spindle (synchronous spindle)<br/>...................................<br/>position: vertical right<br/>number of tools: 1 pcs.<br/>tool clamping length: 120 mm<br/>spindle speed: 6000 rpm<br/>spindle diameter: 50 mm<br/>tool circle max .: 232 mm<br/>motor power: 7.5 kw<br/><br/>2. profiling spindle<br/>...................................<br/>position: vertical right<br/>number of tools: variable, infinitely adjustable, cnc<br/>tool clamping length: 320 mm<br/>spindle stroke vertical: variable, adjustment stepless, cnc<br/>spindle speed: 6000 rpm<br/>spindle diameter: 50 mm<br/>tool circle max .: 232 mm<br/>engine power: 11 kw<br/><br/>3. nut utensil from above horizontally<br/>...................................<br/>adjustment axial 30 mm, pneumatically clocked 8 positions<br/>adjustment radial 125 mm, pneumatically clocked 8 positions<br/>spindle diameter: 40 mm<br/>clamping length: 40 mm<br/>motor power: 3 kw<br/>speed: 9000 rpm<br/><br/>4. profiling spindle (fitting spindle)<br/>...................................<br/>tool clamping length: 160 mm<br/>adjustment axial 115 mm, pneumatically clocked 8 positions<br/>adjustment radial 100 mm, pneumatically clocked 8 positions<br/>spindle speed: 5850 rpm<br/>spindle diameter: 40 mm<br/>tool circle max .: 210 mm<br/>motor power: 3.8 kw<br/><br/><br/>other features<br/>...................................<br/><br/>online capability<br/>umfälzeinrichung for tear-free refolding<br/>double piece package<br/>return conveyor for one-man operation:<br/>screen control<br/>angular window means<br/>electronic angle display for slanted windows<br/>control: pc nexus<br/>weinig type production program<br/><br/>option: used tool set for window<br/>gold iv 68/78<br/><br/><br/>(technical information according to the manufacturer - without guarantee!)<br/><br/><br/><br/><br/> TENONING SPINDLE: 1 ST.
NUMBER OF MILLING AGREGATES: 4 ST.
SPINDLE DIAMETER: 50 MM
WEINIG UNICONTROL 6 WITH CNC SPINDLES
...................................

TECHNICAL DATA SUMMARY
(POSSIBLY ADDITIONALLY INCLUDED ACCESSORIES PLEASE INQUIRE)
...................................

CUT SAW
...................................
CROSSCUT SAW ELECTRONICALLY, HORIZONTALLY INFINITELY ADJUSTABLE
NUMBER OF TOOLS: 1 PCS.
SPINDLE SPEED: 3000-6000 RPM
SPINDLE DIAMETER: 40 MM
TOOL DIAMETER MAX .: 400 MM
MOTOR POWER: 3 KW
ADJUSTMENT RADIAL PNEUMATICALLY CONTROLLED 8 POSITIONS
E.G. FOR EDGE ROUNDING FROM ABOVE
LASER STRAIGHTENING LIGHT FOR DETECTING THE SAWING SECTION


LENGTH STOP CNC CONTROLLED
...................................
LENGTH 3500 MM
ELECTRONIC LENGTH STOP

1. TAP AND SLOT SPINDLE
...................................
NUMBER OF TOOLS: VARIABLE, INFINITELY ADJUSTABLE, CNC
TOOL CLAMPING LENGTH: 320 MM
SPINDLE STROKE VERTICAL: VARIABLE, ADJUSTMENT STEPLESS, CNC
SPINDLE SPEED: 3500 RPM
SPINDLE DIAMETER: 50 MM
TOOL DIAMETER MAX .: 320 MM
ENGINE POWER: 11 KW

1. PROFILING SPINDLE (SYNCHRONOUS SPINDLE)
...................................
POSITION: VERTICAL RIGHT
NUMBER OF TOOLS: 1 PCS.
TOOL CLAMPING LENGTH: 120 MM
SPINDLE SPEED: 6000 RPM
SPINDLE DIAMETER: 50 MM
TOOL CIRCLE MAX .: 232 MM
MOTOR POWER: 7.5 KW

2. PROFILING SPINDLE
...................................
POSITION: VERTICAL RIGHT
NUMBER OF TOOLS: VARIABLE, INFINITELY ADJUSTABLE, CNC
TOOL CLAMPING LENGTH: 320 MM
SPINDLE STROKE VERTICAL: VARIABLE, ADJUSTMENT STEPLESS, CNC
SPINDLE SPEED: 6000 RPM
SPINDLE DIAMETER: 50 MM
TOOL CIRCLE MAX .: 232 MM
ENGINE POWER: 11 KW

3. NUT UTENSIL FROM ABOVE HORIZONTALLY
...................................
ADJUSTMENT AXIAL 30 MM, PNEUMATICALLY CLOCKED 8 POSITIONS
ADJUSTMENT RADIAL 125 MM, PNEUMATICALLY CLOCKED 8 POSITIONS
SPINDLE DIAMETER: 40 MM
CLAMPING LENGTH: 40 MM
MOTOR POWER: 3 KW
SPEED: 9000 RPM

4. PROFILING SPINDLE (FITTING SPINDLE)
...................................
TOOL CLAMPING LENGTH: 160 MM
ADJUSTMENT AXIAL 115 MM, PNEUMATICALLY CLOCKED 8 POSITIONS
ADJUSTMENT RADIAL 100 MM, PNEUMATICALLY CLOCKED 8 POSITIONS
SPINDLE SPEED: 5850 RPM
SPINDLE DIAMETER: 40 MM
TOOL CIRCLE MAX .: 210 MM
MOTOR POWER: 3.8 KW


OTHER FEATURES
...................................

ONLINE CAPABILITY
UMFäLZEINRICHUNG FOR TEAR-FREE REFOLDING
DOUBLE PIECE PACKAGE
RETURN CONVEYOR FOR ONE-MAN OPERATION:
SCREEN CONTROL
ANGULAR WINDOW MEANS
ELECTRONIC ANGLE DISPLAY FOR SLANTED WINDOWS
CONTROL: PC NEXUS
WEINIG TYPE PRODUCTION PROGRAM

OPTION: USED TOOL SET FOR WINDOW
GOLD IV 68/78


(TECHNICAL INFORMATION ACCORDING TO THE MANUFACTURER - WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-labelling machine khs innoket kl 2090/120 – 60

labelling machine by khs innoket kl 2090/120 – 60, manufactured in year 2005 and was stopped in year 2015. this labelling machine can be equipped with four of the same or different type labelling stations. currently it has two labelling system for paper labels with cold glue and additionally there are three stations for self-adhesive labels. machine it has been used for glass bottles front/back/neck labels. capacity for paper labels is 66 000 bph and for self-adhesive labels is 40 000 bph. controlled by siemens s7 plc. equipment is in very good condition.

technical specifications:

manufacturer: khs
machine type: innoket kl 2090/120 – 60
manufacturer year: 2005
ready cut paper labels, hot clue: 66 000 bph
self adhesive plastic labels: 40 000 bph
pitch: 120 mm
number of bottle turrets: 60 pcs.
carousel diameter: 2360 mm.
label positions: front, back, neck
label lengths: 140 mm.   LABELLING MACHINE KHS INNOKET KL 2090/120 – 60 LABELLING MACHINE BY KHS INNOKET KL 2090/120 – 60, MANUFACTURED IN YEAR 2005 AND WAS STOPPED IN YEAR 2015. THIS LABELLING MACHINE CAN BE EQUIPPED WITH FOUR OF THE SAME OR DIFFERENT TYPE LABELLING STATIONS. CURRENTLY IT HAS TWO LABELLING SYSTEM FOR PAPER LABELS WITH COLD GLUE AND ADDITIONALLY THERE ARE THREE STATIONS FOR SELF-ADHESIVE LABELS. MACHINE IT HAS BEEN USED FOR GLASS BOTTLES FRONT/BACK/NECK LABELS. CAPACITY FOR PAPER LABELS IS 66 000 BPH AND FOR SELF-ADHESIVE LABELS IS 40 000 BPH. CONTROLLED BY SIEMENS S7 PLC. EQUIPMENT IS IN VERY GOOD CONDITION. TECHNICAL SPECIFICATIONS: MANUFACTURER: KHS MACHINE TYPE: INNOKET KL 2090/120 – 60 MANUFACTURER YEAR: 2005 READY CUT PAPER LABELS, HOT CLUE: 66 000 BPH SELF ADHESIVE PLASTIC LABELS: 40 000 BPH PITCH: 120 MM NUMBER OF BOTTLE TURRETS: 60 PCS. CAROUSEL DIAMETER: 2360 MM. LABEL POSITIONS: FRONT, BACK, NECK LABEL LENGTHS: 140 MM.
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-sheet width: 4020 mm<br/>plate thickness: 4,0 mm<br/>distance between columns: 4200 mm<br/>upper clamping bar adjustment: 400 mm<br/>adjustment of lower beam: 80 mm<br/>engine output: 8,0 kw<br/>back stop - adjustable: 3.500 mm<br/>weight of the machine ca.: 10,9 to.<br/>range l-w-h: 5.720 x 1.776 x 1.740 mm ohne ha<br/><br/><br/><br/><br/> SHEET WIDTH: 4020 MM
PLATE THICKNESS: 4,0 MM
DISTANCE BETWEEN COLUMNS: 4200 MM
UPPER CLAMPING BAR ADJUSTMENT: 400 MM
ADJUSTMENT OF LOWER BEAM: 80 MM
ENGINE OUTPUT: 8,0 KW
BACK STOP - ADJUSTABLE: 3.500 MM
WEIGHT OF THE MACHINE CA.: 10,9 TO.
RANGE L-W-H: 5.720 X 1.776 X 1.740 MM OHNE HA




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Precio: 6.050 €
Ubicación: Land-to ensure they get the pictured accessories.

technical data:

brand: omap

type: 250 fms x 1000

year: 1995

2000 kilos

control: fagor

top width 1000 - 1500-2000 mm

tip height over bed 250 mm

wide bed guides 330 mm, max.

turning diameter over bed 500 mm, max.

turning diameter over slide 300 mm,.

cross slide thrust x 250 mm

diameter spindle bore 77-105 mm

tailstock quill diameter 60 mm, reiststock quill stroke 180 mm

dimensions: lxwxh approx. 3,200 x 1,500 x 2,200 mm  TO ENSURE THEY GET THE PICTURED ACCESSORIES. TECHNICAL DATA: BRAND: OMAP TYPE: 250 FMS X 1000 YEAR: 1995 2000 KILOS CONTROL: FAGOR TOP WIDTH 1000 - 1500-2000 MM TIP HEIGHT OVER BED 250 MM WIDE BED GUIDES 330 MM, MAX. TURNING DIAMETER OVER BED 500 MM, MAX. TURNING DIAMETER OVER SLIDE 300 MM,. CROSS SLIDE THRUST X 250 MM DIAMETER SPINDLE BORE 77-105 MM TAILSTOCK QUILL DIAMETER 60 MM, REISTSTOCK QUILL STROKE 180 MM DIMENSIONS: LXWXH APPROX. 3,200 X 1,500 X 2,200 MM
Vendedor: A-Z Maschinenwelt
Año de construcción: usado
Ubicación: Land-pressure: 100 t<br/>chamfer lenght: 3300 mm<br/>distance between columns: 2700 mm<br/>rapid traverse: 80,0 mm/sec<br/>working feed: 0 - 14 mm/sec<br/>return speed: 110 mm/sec<br/>stroke: 220 mm<br/>dayligth: 410 mm<br/>throat: 300 mm<br/>work height max.: 900 mm<br/>oil volume: 160 ltr.<br/>engine output: 10,0 kw<br/>back stop - adjustable: 500 mm<br/>weight of the machine ca.: 7.500 kg.<br/>dimensions of the machine ca.: 3600 x 2110 x 2730 mm<br/><br/><br/><br/><br/><br/> PRESSURE: 100 T
CHAMFER LENGHT: 3300 MM
DISTANCE BETWEEN COLUMNS: 2700 MM
RAPID TRAVERSE: 80,0 MM/SEC
WORKING FEED: 0 - 14 MM/SEC
RETURN SPEED: 110 MM/SEC
STROKE: 220 MM
DAYLIGTH: 410 MM
THROAT: 300 MM
WORK HEIGHT MAX.: 900 MM
OIL VOLUME: 160 LTR.
ENGINE OUTPUT: 10,0 KW
BACK STOP - ADJUSTABLE: 500 MM
WEIGHT OF THE MACHINE CA.: 7.500 KG.
DIMENSIONS OF THE MACHINE CA.: 3600 X 2110 X 2730 MM





Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-cassette for warehouse, about 1,539 cassettes, cassette length 6, 50 m, 3, 000 kg/kasstte - used -:
 
price on request!
 
manufacturer: fehr
year of construction: 2001
cassettes ges. 1,539 units
specification
1 electrically operated double table long good stack machine, automatically controlled, for the storage and retrieval of for good material, with the help of cassettes
technical data:
capacity 2x3000kg
bottom load table position above ground 700 mm
top load table position above ground 12110 mm
room height 13'450 mm
lifting speed 35 m / min
travel speed 80 m / min
pull-out speed 85 m / min
operating voltage, three-phase 400 v / 50 hz
control voltage 230 v / 50 hz
24 v dc
cassette type internal dimensions (wxhxl) a 520 x 270 x 6500 mm
type b 520 x 520 x 6500 mm
device performance at 100% load 46 ds / h
according to fem based on ub-3000 9.851
pull-out force on the cassette gripper (20% of the payload plus cartridge weight)
 
control automatically arranged using an automatic control over operating terminal, at the camp office
1. 1 double-sided track, length approx 29 m
to hang up on the concrete floor, consisting of:
the two rails of a 55, with the shocks, complete with attachment fittings and the limit stops. the rails are with fade-free special grout under poured.
2. 1 longitudinal-power supply, length approx 29 m, consisting of:
vahle plastic conductor line, with guard, complete with the mounting brackets.
3. 1 long goods stacking devices, consisting of:
camp 2 head straps welded design, with the chassis, this consisting of wã¤lzge controlled from the two engines with shaft mounted gearboxes built-on, as well as the 4 - crane wheels, with leadership roles, running laterally on the road,
2 columns in welded box construction, with the guides for the lifters from material performed st 52.3, screwed on the head straps, including the stiffening frame, as well as a ladder of descent,.
1 pallet truck, consisting of: the steel construction with the necessary rubber buffers for the two hã¶henend positions, the roller bearing support and leadership roles, the double cassette table with glides, the extractor, the centering with side guard rails to complete the box, complete with the runners for the gripper, the drive motors, sprockets, shafts, chains and electrical installation,
controls the horizontal, which â«fachbelegtâ».
as a hoist is used:
1 controlled engine
with intermediate gear (designed according to fem 3 m) and drum includes cords and ball-bearing pulleys; security 12, with double-grooved rope drum, dust-protected bearings drum bearing,
rope pulleys conditions according to din 15020.
4. electrical installation, comprising:
-the special cables, including all required terminal boxes, connecting cables fixed installed on the device
-the flexible power supply in cable caterpillar to the trucks,
-completely wired cabinet incl. contactor and the necessary controls, the mushroom-head pushbutton, which shuts off the main contactor (red mushroom can be rotated), switch with push button, key switch
-the two key selector switches, which are used for the pre-selection of the operating modes â«tip operation/automatic modeâ»,
the limit switches for the limitation of the lifting and moving
-the reciprocal locking of lifting and suspension compared to the ausziehvorâ¬
-direction, the laterally mounted clamping wires to the continuous control of the speed profile
-the profile control, which monitors whether the space between the shelf and device is free,
-the output fuse, which prevents that cassettes in a free space be outsourced,
-excess height control, which prevents a training and storage of high-loaded cartridges,
-the control of tape position on the table,
-the fault indicator in the control panel on the lift truck,
-the operating hour counters for driving and lifting mechanism
displacement measuring systems
the wear-free optical measuring system guarantees maximum service life and precise way capture of the x - and y-coordinates. the way capture of the two gripper through the absolute value encoder is located in the millimetre range. both systems deliver the absolutely correct readings again even after a power failure. thus it takes no movements for repositioning and the device starts working immediately without delay.
driving behavior
driving in the x and y axes is such that at the maximum possible speed infinitely variable over short or long distances optimal speed curves are driven. the behavior of the device dimensions at various distances is taken into account and flows as a control variable with a. the pendulum effect is compensated with counteract the driving curve characteristics,
learning functions
the computer software is so forward-looking that hardly a parameterization of various sizes must be done by the programmer. the software adaptation to different design types of device and storage compartments is done through the learning and self-learning onsite. following learning processes take place during commissioning on site:
-self-learning of the xy-driving behavior
-learning of the gripper behavior
-learning the transfer and recording places of the periphery
self learning the topology of all storage compartments of different arrangement and sizes
operating modes
-jog
the long good stacking device in the direction of travel, the truck and the two pull-out devices can be moved with the control buttons.
-semi automatic (automatic start-up), arranged in the stationary cupboard.
with the hand-held micro terminal, various movements are run separately or in combination automatically:
-driving horizontal
vertical lifting/lowering
-pull cassette
-slide tape
-positioning in front of the nearest
option
pc-cabinet for m fs calculator
execution: wxhxd 600 x 1900 x 600 mm
4-field 17 "monitor field of vision
part of front door for computer unit
integrated keyboard tray
storage compartment with removable rails
socket 100 mm
(ii) peripheral components, including:
1 1 carousel ka-3000 gr gr
for cassettes with rods
technical data:
capacity/capacity 3000 kg
number of pitches 4
conveying speed along 24 m / min
cross conveyor speed 40 m / min
height from top of floor 700 mm
operating voltage 400 v / 50 hz
control voltage 230 v / 50 hz
the cartridge space tracking via the automatic control. the carousel consists in particular of:
outsourcing train, consisting of:
-the steel foot plates and anchors, directly on the ground turned off and integrated into the shelf, suitable for the installation of the required mechanical parts
-the spezialgleitem, as well as the lateral guide
-the gripper mechanism, which contains the tape and transported to the next position positively
the gear motor with chain, the sprocket wheels and the chain guide
cross conveyor belt, comprising;
-two cassette courses, one of them as work provided
-the steel construction incl. foot plates and anchors, placed directly on the floor, suitable for the installation of the required mechanical parts
-the special gliders, as well as the lateral guide
-the querverschiebebalken as a driver for the cassettes
-the drive motor with the required drive elements
-the mechanical preparations for the load cells installation at the workplace
storage car, running such as paging railway
electrical control consisting of:
-the control panel with push buttons for all individual movements, including on/off button and emergency push button
-the position and control switches
-power and control supply
-firmly installed control cabinets with built-in control
-the necessary cables, as well as the internal wiring
the safety light barrier incl. mounting brackets, which perceives the person protection during cartridge movement
 
condition: used, the last maintenance was performed in 2017, shortly after it was mined professionally, so that it can be rebuilt at any time. the company which has degraded the plant could perform the installation.
available: available now
location: nuremberg CASSETTE FOR WAREHOUSE, ABOUT 1,539 CASSETTES, CASSETTE LENGTH 6, 50 M, 3, 000 KG/KASSTTE - USED -: PRICE ON REQUEST! MANUFACTURER: FEHR YEAR OF CONSTRUCTION: 2001 CASSETTES GES. 1,539 UNITS SPECIFICATION 1 ELECTRICALLY OPERATED DOUBLE TABLE LONG GOOD STACK MACHINE, AUTOMATICALLY CONTROLLED, FOR THE STORAGE AND RETRIEVAL OF FOR GOOD MATERIAL, WITH THE HELP OF CASSETTES TECHNICAL DATA: CAPACITY 2X3000KG BOTTOM LOAD TABLE POSITION ABOVE GROUND 700 MM TOP LOAD TABLE POSITION ABOVE GROUND 12110 MM ROOM HEIGHT 13'450 MM LIFTING SPEED 35 M / MIN TRAVEL SPEED 80 M / MIN PULL-OUT SPEED 85 M / MIN OPERATING VOLTAGE, THREE-PHASE 400 V / 50 HZ CONTROL VOLTAGE 230 V / 50 HZ 24 V DC CASSETTE TYPE INTERNAL DIMENSIONS (WXHXL) A 520 X 270 X 6500 MM TYPE B 520 X 520 X 6500 MM DEVICE PERFORMANCE AT 100% LOAD 46 DS / H ACCORDING TO FEM BASED ON UB-3000 9.851 PULL-OUT FORCE ON THE CASSETTE GRIPPER (20% OF THE PAYLOAD PLUS CARTRIDGE WEIGHT) CONTROL AUTOMATICALLY ARRANGED USING AN AUTOMATIC CONTROL OVER OPERATING TERMINAL, AT THE CAMP OFFICE 1. 1 DOUBLE-SIDED TRACK, LENGTH APPROX 29 M TO HANG UP ON THE CONCRETE FLOOR, CONSISTING OF: THE TWO RAILS OF A 55, WITH THE SHOCKS, COMPLETE WITH ATTACHMENT FITTINGS AND THE LIMIT STOPS. THE RAILS ARE WITH FADE-FREE SPECIAL GROUT UNDER POURED. 2. 1 LONGITUDINAL-POWER SUPPLY, LENGTH APPROX 29 M, CONSISTING OF: VAHLE PLASTIC CONDUCTOR LINE, WITH GUARD, COMPLETE WITH THE MOUNTING BRACKETS. 3. 1 LONG GOODS STACKING DEVICES, CONSISTING OF: CAMP 2 HEAD STRAPS WELDED DESIGN, WITH THE CHASSIS, THIS CONSISTING OF W&ATILDE;&CURREN;LZGE CONTROLLED FROM THE TWO ENGINES WITH SHAFT MOUNTED GEARBOXES BUILT-ON, AS WELL AS THE 4 - CRANE WHEELS, WITH LEADERSHIP ROLES, RUNNING LATERALLY ON THE ROAD, 2 COLUMNS IN WELDED BOX CONSTRUCTION, WITH THE GUIDES FOR THE LIFTERS FROM MATERIAL PERFORMED ST 52.3, SCREWED ON THE HEAD STRAPS, INCLUDING THE STIFFENING FRAME, AS WELL AS A LADDER OF DESCENT,. 1 PALLET TRUCK, CONSISTING OF: THE STEEL CONSTRUCTION WITH THE NECESSARY RUBBER BUFFERS FOR THE TWO H&ATILDE;&PARA;HENEND POSITIONS, THE ROLLER BEARING SUPPORT AND LEADERSHIP ROLES, THE DOUBLE CASSETTE TABLE WITH GLIDES, THE EXTRACTOR, THE CENTERING WITH SIDE GUARD RAILS TO COMPLETE THE BOX, COMPLETE WITH THE RUNNERS FOR THE GRIPPER, THE DRIVE MOTORS, SPROCKETS, SHAFTS, CHAINS AND ELECTRICAL INSTALLATION, CONTROLS THE HORIZONTAL, WHICH &ACIRC;&LAQUO;FACHBELEGT&ACIRC;&RAQUO;. AS A HOIST IS USED: 1 CONTROLLED ENGINE WITH INTERMEDIATE GEAR (DESIGNED ACCORDING TO FEM 3 M) AND DRUM INCLUDES CORDS AND BALL-BEARING PULLEYS; SECURITY 12, WITH DOUBLE-GROOVED ROPE DRUM, DUST-PROTECTED BEARINGS DRUM BEARING, ROPE PULLEYS CONDITIONS ACCORDING TO DIN 15020. 4. ELECTRICAL INSTALLATION, COMPRISING: -THE SPECIAL CABLES, INCLUDING ALL REQUIRED TERMINAL BOXES, CONNECTING CABLES FIXED INSTALLED ON THE DEVICE -THE FLEXIBLE POWER SUPPLY IN CABLE CATERPILLAR TO THE TRUCKS, -COMPLETELY WIRED CABINET INCL. CONTACTOR AND THE NECESSARY CONTROLS, THE MUSHROOM-HEAD PUSHBUTTON, WHICH SHUTS OFF THE MAIN CONTACTOR (RED MUSHROOM CAN BE ROTATED), SWITCH WITH PUSH BUTTON, KEY SWITCH -THE TWO KEY SELECTOR SWITCHES, WHICH ARE USED FOR THE PRE-SELECTION OF THE OPERATING MODES &ACIRC;&LAQUO;TIP OPERATION/AUTOMATIC MODE&ACIRC;&RAQUO;, THE LIMIT SWITCHES FOR THE LIMITATION OF THE LIFTING AND MOVING -THE RECIPROCAL LOCKING OF LIFTING AND SUSPENSION COMPARED TO THE AUSZIEHVOR&ACIRC;&NOT; -DIRECTION, THE LATERALLY MOUNTED CLAMPING WIRES TO THE CONTINUOUS CONTROL OF THE SPEED PROFILE -THE PROFILE CONTROL, WHICH MONITORS WHETHER THE SPACE BETWEEN THE SHELF AND DEVICE IS FREE, -THE OUTPUT FUSE, WHICH PREVENTS THAT CASSETTES IN A FREE SPACE BE OUTSOURCED, -EXCESS HEIGHT CONTROL, WHICH PREVENTS A TRAINING AND STORAGE OF HIGH-LOADED CARTRIDGES, -THE CONTROL OF TAPE POSITION ON THE TABLE, -THE FAULT INDICATOR IN THE CONTROL PANEL ON THE LIFT TRUCK, -THE OPERATING HOUR COUNTERS FOR DRIVING AND LIFTING MECHANISM DISPLACEMENT MEASURING SYSTEMS THE WEAR-FREE OPTICAL MEASURING SYSTEM GUARANTEES MAXIMUM SERVICE LIFE AND PRECISE WAY CAPTURE OF THE X - AND Y-COORDINATES. THE WAY CAPTURE OF THE TWO GRIPPER THROUGH THE ABSOLUTE VALUE ENCODER IS LOCATED IN THE MILLIMETRE RANGE. BOTH SYSTEMS DELIVER THE ABSOLUTELY CORRECT READINGS AGAIN EVEN AFTER A POWER FAILURE. THUS IT TAKES NO MOVEMENTS FOR REPOSITIONING AND THE DEVICE STARTS WORKING IMMEDIATELY WITHOUT DELAY. DRIVING BEHAVIOR DRIVING IN THE X AND Y AXES IS SUCH THAT AT THE MAXIMUM POSSIBLE SPEED INFINITELY VARIABLE OVER SHORT OR LONG DISTANCES OPTIMAL SPEED CURVES ARE DRIVEN. THE BEHAVIOR OF THE DEVICE DIMENSIONS AT VARIOUS DISTANCES IS TAKEN INTO ACCOUNT AND FLOWS AS A CONTROL VARIABLE WITH A. THE PENDULUM EFFECT IS COMPENSATED WITH COUNTERACT THE DRIVING CURVE CHARACTERISTICS, LEARNING FUNCTIONS THE COMPUTER SOFTWARE IS SO FORWARD-LOOKING THAT HARDLY A PARAMETERIZATION OF VARIOUS SIZES MUST BE DONE BY THE PROGRAMMER. THE SOFTWARE ADAPTATION TO DIFFERENT DESIGN TYPES OF DEVICE AND STORAGE COMPARTMENTS IS DONE THROUGH THE LEARNING AND SELF-LEARNING ONSITE. FOLLOWING LEARNING PROCESSES TAKE PLACE DURING COMMISSIONING ON SITE: -SELF-LEARNING OF THE XY-DRIVING BEHAVIOR -LEARNING OF THE GRIPPER BEHAVIOR -LEARNING THE TRANSFER AND RECORDING PLACES OF THE PERIPHERY SELF LEARNING THE TOPOLOGY OF ALL STORAGE COMPARTMENTS OF DIFFERENT ARRANGEMENT AND SIZES OPERATING MODES -JOG THE LONG GOOD STACKING DEVICE IN THE DIRECTION OF TRAVEL, THE TRUCK AND THE TWO PULL-OUT DEVICES CAN BE MOVED WITH THE CONTROL BUTTONS. -SEMI AUTOMATIC (AUTOMATIC START-UP), ARRANGED IN THE STATIONARY CUPBOARD. WITH THE HAND-HELD MICRO TERMINAL, VARIOUS MOVEMENTS ARE RUN SEPARATELY OR IN COMBINATION AUTOMATICALLY: -DRIVING HORIZONTAL VERTICAL LIFTING/LOWERING -PULL CASSETTE -SLIDE TAPE -POSITIONING IN FRONT OF THE NEAREST OPTION PC-CABINET FOR M FS CALCULATOR EXECUTION: WXHXD 600 X 1900 X 600 MM 4-FIELD 17 "MONITOR FIELD OF VISION PART OF FRONT DOOR FOR COMPUTER UNIT INTEGRATED KEYBOARD TRAY STORAGE COMPARTMENT WITH REMOVABLE RAILS SOCKET 100 MM (II) PERIPHERAL COMPONENTS, INCLUDING: 1 1 CAROUSEL KA-3000 GR GR FOR CASSETTES WITH RODS TECHNICAL DATA: CAPACITY/CAPACITY 3000 KG NUMBER OF PITCHES 4 CONVEYING SPEED ALONG 24 M / MIN CROSS CONVEYOR SPEED 40 M / MIN HEIGHT FROM TOP OF FLOOR 700 MM OPERATING VOLTAGE 400 V / 50 HZ CONTROL VOLTAGE 230 V / 50 HZ THE CARTRIDGE SPACE TRACKING VIA THE AUTOMATIC CONTROL. THE CAROUSEL CONSISTS IN PARTICULAR OF: OUTSOURCING TRAIN, CONSISTING OF: -THE STEEL FOOT PLATES AND ANCHORS, DIRECTLY ON THE GROUND TURNED OFF AND INTEGRATED INTO THE SHELF, SUITABLE FOR THE INSTALLATION OF THE REQUIRED MECHANICAL PARTS -THE SPEZIALGLEITEM, AS WELL AS THE LATERAL GUIDE -THE GRIPPER MECHANISM, WHICH CONTAINS THE TAPE AND TRANSPORTED TO THE NEXT POSITION POSITIVELY THE GEAR MOTOR WITH CHAIN, THE SPROCKET WHEELS AND THE CHAIN GUIDE CROSS CONVEYOR BELT, COMPRISING; -TWO CASSETTE COURSES, ONE OF THEM AS WORK PROVIDED -THE STEEL CONSTRUCTION INCL. FOOT PLATES AND ANCHORS, PLACED DIRECTLY ON THE FLOOR, SUITABLE FOR THE INSTALLATION OF THE REQUIRED MECHANICAL PARTS -THE SPECIAL GLIDERS, AS WELL AS THE LATERAL GUIDE -THE QUERVERSCHIEBEBALKEN AS A DRIVER FOR THE CASSETTES -THE DRIVE MOTOR WITH THE REQUIRED DRIVE ELEMENTS -THE MECHANICAL PREPARATIONS FOR THE LOAD CELLS INSTALLATION AT THE WORKPLACE STORAGE CAR, RUNNING SUCH AS PAGING RAILWAY ELECTRICAL CONTROL CONSISTING OF: -THE CONTROL PANEL WITH PUSH BUTTONS FOR ALL INDIVIDUAL MOVEMENTS, INCLUDING ON/OFF BUTTON AND EMERGENCY PUSH BUTTON -THE POSITION AND CONTROL SWITCHES -POWER AND CONTROL SUPPLY -FIRMLY INSTALLED CONTROL CABINETS WITH BUILT-IN CONTROL -THE NECESSARY CABLES, AS WELL AS THE INTERNAL WIRING THE SAFETY LIGHT BARRIER INCL. MOUNTING BRACKETS, WHICH PERCEIVES THE PERSON PROTECTION DURING CARTRIDGE MOVEMENT CONDITION: USED, THE LAST MAINTENANCE WAS PERFORMED IN 2017, SHORTLY AFTER IT WAS MINED PROFESSIONALLY, SO THAT IT CAN BE REBUILT AT ANY TIME. THE COMPANY WHICH HAS DEGRADED THE PLANT COULD PERFORM THE INSTALLATION. AVAILABLE: AVAILABLE NOW LOCATION: NUREMBERG
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Precio: used machinery auction RESALE 4.000 €
Ubicación: Land-weight approx.: 7000 kg<br/>dimensions (l x w x h) approx.: 6200 x 1400 x 2000 mm<br/>description: sertom round bending machine<br> <br> roll length 2500 mm, roll diameter top 250 mm, 2 rolls bottom 200 mm, opeing size max. 120 mm, WEIGHT APPROX.: 7000 KG
DIMENSIONS (L X W X H) APPROX.: 6200 X 1400 X 2000 MM
DESCRIPTION: SERTOM ROUND BENDING MACHINE

ROLL LENGTH 2500 MM, ROLL DIAMETER TOP 250 MM, 2 ROLLS BOTTOM 200 MM, OPEING SIZE MAX. 120 MM,
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 8.820 €
Ubicación: Land-thread cutting device
freischneiden setup
drilling depth shut off programmable
drilling depth and speed display - digital
thread cutting device m30 (depending on elevation)
r1 spindle speed with continuous transmission speed series 100-2000 1 / min
r2 spindle speed with continuous transmission speed range 70-1400 1/min
drilling capacity 35/40 mm
spindle mk 4
drilling depth 160 mm
throat depth 300 mm
usable surface (pivoting) 590 x 450 mm
feed 0-300 mm / min stepless
table height with rack and pinion
machine dimensions (w x d x h) 610 x 850 x 1920 mm
motor three-phase 400 v pole changing bar 1,5/3,0 kw
weight 420 kg

including drilling package consisting: taper mandrel, chuck, vice and t - groove set. 
option: spindle stop and modulus of rupture of chip 660 eur

delivery: free house including packaging

not the right machine?
we do also other afloat products - ask for a quote!

flott base partner *. THREAD CUTTING DEVICE FREISCHNEIDEN SETUP DRILLING DEPTH SHUT OFF PROGRAMMABLE DRILLING DEPTH AND SPEED DISPLAY - DIGITAL THREAD CUTTING DEVICE M30 (DEPENDING ON ELEVATION) R1 SPINDLE SPEED WITH CONTINUOUS TRANSMISSION SPEED SERIES 100-2000 1 / MIN R2 SPINDLE SPEED WITH CONTINUOUS TRANSMISSION SPEED RANGE 70-1400 1/MIN DRILLING CAPACITY 35/40 MM SPINDLE MK 4 DRILLING DEPTH 160 MM THROAT DEPTH 300 MM USABLE SURFACE (PIVOTING) 590 X 450 MM FEED 0-300 MM / MIN STEPLESS TABLE HEIGHT WITH RACK AND PINION MACHINE DIMENSIONS (W X D X H) 610 X 850 X 1920 MM MOTOR THREE-PHASE 400 V POLE CHANGING BAR 1,5/3,0 KW WEIGHT 420 KG INCLUDING DRILLING PACKAGE CONSISTING: TAPER MANDREL, CHUCK, VICE AND T - GROOVE SET. OPTION: SPINDLE STOP AND MODULUS OF RUPTURE OF CHIP 660 EUR DELIVERY: FREE HOUSE INCLUDING PACKAGING NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER *.
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Precio: used machinery auction RESALE 150 €
Ubicación: Land-weight approx.: 250 kg<br/>dimensions (l x w x h) approx.: 900 x 800 x 1400 mm<br/>description: 2 saw blades, saw blade size each 275 mm, length stop at the right side 1000 mm, saw blades not adjustable, 2 sharpened replacement blades WEIGHT APPROX.: 250 KG
DIMENSIONS (L X W X H) APPROX.: 900 X 800 X 1400 MM
DESCRIPTION: 2 SAW BLADES, SAW BLADE SIZE EACH 275 MM, LENGTH STOP AT THE RIGHT SIDE 1000 MM, SAW BLADES NOT ADJUSTABLE, 2 SHARPENED REPLACEMENT BLADES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 905005
number: 1 pcs.
manufacturer: traub
type: tnc 65 dgy
control: traub tx 8f
year of construction: 1996 (2011)
state of preservation: second-hand machine
machine a (hours): 18,500
stories about: 1 layers

description

turning

maximum turning diameter 300 mm
maximum turning length 450 mm
maximum swing over bed cover 480 mm
maximum chuck diameter 175 mm
max speed main spindle 5600 1/min
maximum performance main spindle in ed 10-40 / 100% 18.5 kw
main spindle spindle passage 65 mm
spindle flange size a6 main spindle
axes on the main spindle unit c
hollow clamping cylinder to the main spindle
maximum rotation speed 5600 1/min spindle
maximum performance counter spindle in ed 10-40 / 100% 11 kw
spindle passage sub-spindle 65 mm
spindle flange size counter spindle a6
axis counter spindle unit v/c
travel in v counter spindle unit 520 mm
maximum rapid traverse speed v counter spindle unit 30 m / min
coolant through the spindle
werkstã¼ckausstosser in the counter spindle

turret top
number of stations of which powered 10/10
tool holder in the turret vdi 30
speed tool drive 4000 1/min
the revolver x/y/z axes
travel in x/y/z 140/70/450 mm
maximum rapid traverse in x/y/z 15/6/30 m / min

gun down
number of stations of which powered 10/10
tool holder in the turret vdi 30
speed tool drive 4000 1/min
the turret of x/z axes
travel in x/y/z 140 /-/ 450 mm
maximum rapid traverse in x/y/z 15 /-/ 30 m / min

more facilities

splash panel with fully encapsulated workspace
lighting in the work area
hinged belt chip conveyor
machine is / was operated with emulsion
coolant system
the belt of part of
precast acceptance facility
bar loader/bar feeder traub stamag dn 61

general technical data

total power consumption 49 kva
machine dimensions (lxwxh) approx. 2562 x 1969 x 1790 mm
machine weight approx. 6500 kg

comment

the engine was overhauled 2011 completely professionally and was since less than single shift operation.
we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 905005 NUMBER: 1 PCS. MANUFACTURER: TRAUB TYPE: TNC 65 DGY CONTROL: TRAUB TX 8F YEAR OF CONSTRUCTION: 1996 (2011) STATE OF PRESERVATION: SECOND-HAND MACHINE MACHINE A (HOURS): 18,500 STORIES ABOUT: 1 LAYERS DESCRIPTION TURNING MAXIMUM TURNING DIAMETER 300 MM MAXIMUM TURNING LENGTH 450 MM MAXIMUM SWING OVER BED COVER 480 MM MAXIMUM CHUCK DIAMETER 175 MM MAX SPEED MAIN SPINDLE 5600 1/MIN MAXIMUM PERFORMANCE MAIN SPINDLE IN ED 10-40 / 100% 18.5 KW MAIN SPINDLE SPINDLE PASSAGE 65 MM SPINDLE FLANGE SIZE A6 MAIN SPINDLE AXES ON THE MAIN SPINDLE UNIT C HOLLOW CLAMPING CYLINDER TO THE MAIN SPINDLE MAXIMUM ROTATION SPEED 5600 1/MIN SPINDLE MAXIMUM PERFORMANCE COUNTER SPINDLE IN ED 10-40 / 100% 11 KW SPINDLE PASSAGE SUB-SPINDLE 65 MM SPINDLE FLANGE SIZE COUNTER SPINDLE A6 AXIS COUNTER SPINDLE UNIT V/C TRAVEL IN V COUNTER SPINDLE UNIT 520 MM MAXIMUM RAPID TRAVERSE SPEED V COUNTER SPINDLE UNIT 30 M / MIN COOLANT THROUGH THE SPINDLE WERKST&ATILDE;&FRAC14;CKAUSSTOSSER IN THE COUNTER SPINDLE TURRET TOP NUMBER OF STATIONS OF WHICH POWERED 10/10 TOOL HOLDER IN THE TURRET VDI 30 SPEED TOOL DRIVE 4000 1/MIN THE REVOLVER X/Y/Z AXES TRAVEL IN X/Y/Z 140/70/450 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 15/6/30 M / MIN GUN DOWN NUMBER OF STATIONS OF WHICH POWERED 10/10 TOOL HOLDER IN THE TURRET VDI 30 SPEED TOOL DRIVE 4000 1/MIN THE TURRET OF X/Z AXES TRAVEL IN X/Y/Z 140 /-/ 450 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 15 /-/ 30 M / MIN MORE FACILITIES SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA HINGED BELT CHIP CONVEYOR MACHINE IS / WAS OPERATED WITH EMULSION COOLANT SYSTEM THE BELT OF PART OF PRECAST ACCEPTANCE FACILITY BAR LOADER/BAR FEEDER TRAUB STAMAG DN 61 GENERAL TECHNICAL DATA TOTAL POWER CONSUMPTION 49 KVA MACHINE DIMENSIONS (LXWXH) APPROX. 2562 X 1969 X 1790 MM MACHINE WEIGHT APPROX. 6500 KG COMMENT THE ENGINE WAS OVERHAULED 2011 COMPLETELY PROFESSIONALLY AND WAS SINCE LESS THAN SINGLE SHIFT OPERATION. WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 4.300 €
Ubicación: Land-weight approx.: 1500 kg<br/>dimensions (l x w x h) approx.: 3100 x 1900 x 2000 mm<br/>description: table dimensions 1255 x 900 mm, table height 900 mm, motor power 6 kw, speeds 3000/4500/6000/9000 rpm, tool holder sk 40, double-sided electromotive spindle adjustment, electromotive table opening switching 72/105/160/225/305 mm, spindle diameter 30 mm, integral fence aigner, extendable workpiece support, spindle height adjustment 150 mm, 4-roll-feed unit maggi steff 2044, 8 feed rates 4 to 66 m/min, electromotive integral fence adjustment, double-sided table extensions 580 mm plus swivelling stop per side WEIGHT APPROX.: 1500 KG
DIMENSIONS (L X W X H) APPROX.: 3100 X 1900 X 2000 MM
DESCRIPTION: TABLE DIMENSIONS 1255 X 900 MM, TABLE HEIGHT 900 MM, MOTOR POWER 6 KW, SPEEDS 3000/4500/6000/9000 RPM, TOOL HOLDER SK 40, DOUBLE-SIDED ELECTROMOTIVE SPINDLE ADJUSTMENT, ELECTROMOTIVE TABLE OPENING SWITCHING 72/105/160/225/305 MM, SPINDLE DIAMETER 30 MM, INTEGRAL FENCE AIGNER, EXTENDABLE WORKPIECE SUPPORT, SPINDLE HEIGHT ADJUSTMENT 150 MM, 4-ROLL-FEED UNIT MAGGI STEFF 2044, 8 FEED RATES 4 TO 66 M/MIN, ELECTROMOTIVE INTEGRAL FENCE ADJUSTMENT, DOUBLE-SIDED TABLE EXTENSIONS 580 MM PLUS SWIVELLING STOP PER SIDE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-year of construction: 2006
hours of operation machine: 25.436 h (06.03.2019)
pressing force approx.: 850 kn
bending length approx.: 2210 mm
control: tasc 6000
working height approx.: 1050 mm
free stand round about: 1750 mm
usable height approx.: 615 mm
space requirements: 2840 x 3100 x 1740 mm
approximate weight machine: 7,800 kg
total connected load approx.: 17 kva

hours of operation a machine: 25.436 h (06.03.2019)
a hydraulic: 17.535 h (06.03.2019)
run-time compression beams: 2593 h (06.03.2019)

standard equipment
-stable machine frame in all-steel construction
-pressure bar with high flexural strength
-electro-hydraulic top drive proportional valves - modern block hydraulic - cnc back gauge with gear rack / bevel drive, for x - and r axes, risk free move the stop fingers from the front - top tool clamping hydraulically
substation stuff for ev matrices, hydraulic clamping, programmable shift (2 positions) - safety device, roll protection covers rear - enclosure air conditioning control
-tasc 6000
-network capability

advanced machine equipment
-increase height/stroke
-additional stop fingers 2-axis
-crowning cnc
-safety device bendguard
-acb preparation
-edition console
-tasc 6000 characters module topscad

technical data subject to change - subject to prior sale
the operating hours for delivery of the machine may differ from the hours recorded in the offer YEAR OF CONSTRUCTION: 2006 HOURS OF OPERATION MACHINE: 25.436 H (06.03.2019) PRESSING FORCE APPROX.: 850 KN BENDING LENGTH APPROX.: 2210 MM CONTROL: TASC 6000 WORKING HEIGHT APPROX.: 1050 MM FREE STAND ROUND ABOUT: 1750 MM USABLE HEIGHT APPROX.: 615 MM SPACE REQUIREMENTS: 2840 X 3100 X 1740 MM APPROXIMATE WEIGHT MACHINE: 7,800 KG TOTAL CONNECTED LOAD APPROX.: 17 KVA HOURS OF OPERATION A MACHINE: 25.436 H (06.03.2019) A HYDRAULIC: 17.535 H (06.03.2019) RUN-TIME COMPRESSION BEAMS: 2593 H (06.03.2019) STANDARD EQUIPMENT -STABLE MACHINE FRAME IN ALL-STEEL CONSTRUCTION -PRESSURE BAR WITH HIGH FLEXURAL STRENGTH -ELECTRO-HYDRAULIC TOP DRIVE PROPORTIONAL VALVES - MODERN BLOCK HYDRAULIC - CNC BACK GAUGE WITH GEAR RACK / BEVEL DRIVE, FOR X - AND R AXES, RISK FREE MOVE THE STOP FINGERS FROM THE FRONT - TOP TOOL CLAMPING HYDRAULICALLY SUBSTATION STUFF FOR EV MATRICES, HYDRAULIC CLAMPING, PROGRAMMABLE SHIFT (2 POSITIONS) - SAFETY DEVICE, ROLL PROTECTION COVERS REAR - ENCLOSURE AIR CONDITIONING CONTROL -TASC 6000 -NETWORK CAPABILITY ADVANCED MACHINE EQUIPMENT -INCREASE HEIGHT/STROKE -ADDITIONAL STOP FINGERS 2-AXIS -CROWNING CNC -SAFETY DEVICE BENDGUARD -ACB PREPARATION -EDITION CONSOLE -TASC 6000 CHARACTERS MODULE TOPSCAD TECHNICAL DATA SUBJECT TO CHANGE - SUBJECT TO PRIOR SALE THE OPERATING HOURS FOR DELIVERY OF THE MACHINE MAY DIFFER FROM THE HOURS RECORDED IN THE OFFER
Vendedor: mteg GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 905007
number: 1 pcs.
manufacturer: gildemeister
type: twin 65 rg2
control: siemens 840 d powerline
year of construction: 2002
state of preservation: second-hand machine
machine a (hours): 69.200
spindle a (hours): 34.100

description

turning

maximum turning diameter 200 mm
maximum swing over bed cover 250 mm
maximum chuck diameter 250 mm
max speed main spindle 5000 1/min
maximum performance main spindle in ed 10-40 / 100% 37/25 kw
maximum torque of main spindle in ed 10-40 / 100% 390/270 nm
main spindle spindle passage 65 mm
spindle diameter in front bearing spindle 120 mm
spindle flange size main spindle 170 h 5
hollow clamping cylinder to the main spindle
maximum speed 5000 1/min spindle
maximum performance counter spindle in ed 10-40 / 100% 37/25 kw
max torque spindle in ed 10-40 / 100% 390/270 nm
spindle passage sub-spindle 65 mm
spindle diameter in front bearing spindle 120 mm
spindle flange size counter spindle 170 h 5
tailstock to counter spindle unit in the x direction of movable
tailstock quill stroke 300 mm
tailstock quill printing 600 dan

turret top
number of stations of which powered 12/12
tool holder in the turret vdi 30
axis in the x/y/z/w revolver

gun down
number of stations of which powered 12/12
tool holder in the turret vdi 30
the turret of x/z axes
maximum rapid traverse in x/y/z 30 /-/ 30 m / min

more facilities

splash panel with fully encapsulated workspace
lighting in the work area
oil / emulsion mist extraction system
chip conveyor
machine is / was operated with emulsion
coolant system
high pressure pump 20 bar
the belt of part of
precast acceptance facility
bar loader/bar feeder

general technical data

machine dimensions (lxwxh) approx. 4940 x 3000 x 2488 mm
machine weight 10000 kg

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 905007 NUMBER: 1 PCS. MANUFACTURER: GILDEMEISTER TYPE: TWIN 65 RG2 CONTROL: SIEMENS 840 D POWERLINE YEAR OF CONSTRUCTION: 2002 STATE OF PRESERVATION: SECOND-HAND MACHINE MACHINE A (HOURS): 69.200 SPINDLE A (HOURS): 34.100 DESCRIPTION TURNING MAXIMUM TURNING DIAMETER 200 MM MAXIMUM SWING OVER BED COVER 250 MM MAXIMUM CHUCK DIAMETER 250 MM MAX SPEED MAIN SPINDLE 5000 1/MIN MAXIMUM PERFORMANCE MAIN SPINDLE IN ED 10-40 / 100% 37/25 KW MAXIMUM TORQUE OF MAIN SPINDLE IN ED 10-40 / 100% 390/270 NM MAIN SPINDLE SPINDLE PASSAGE 65 MM SPINDLE DIAMETER IN FRONT BEARING SPINDLE 120 MM SPINDLE FLANGE SIZE MAIN SPINDLE 170 H 5 HOLLOW CLAMPING CYLINDER TO THE MAIN SPINDLE MAXIMUM SPEED 5000 1/MIN SPINDLE MAXIMUM PERFORMANCE COUNTER SPINDLE IN ED 10-40 / 100% 37/25 KW MAX TORQUE SPINDLE IN ED 10-40 / 100% 390/270 NM SPINDLE PASSAGE SUB-SPINDLE 65 MM SPINDLE DIAMETER IN FRONT BEARING SPINDLE 120 MM SPINDLE FLANGE SIZE COUNTER SPINDLE 170 H 5 TAILSTOCK TO COUNTER SPINDLE UNIT IN THE X DIRECTION OF MOVABLE TAILSTOCK QUILL STROKE 300 MM TAILSTOCK QUILL PRINTING 600 DAN TURRET TOP NUMBER OF STATIONS OF WHICH POWERED 12/12 TOOL HOLDER IN THE TURRET VDI 30 AXIS IN THE X/Y/Z/W REVOLVER GUN DOWN NUMBER OF STATIONS OF WHICH POWERED 12/12 TOOL HOLDER IN THE TURRET VDI 30 THE TURRET OF X/Z AXES MAXIMUM RAPID TRAVERSE IN X/Y/Z 30 /-/ 30 M / MIN MORE FACILITIES SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA OIL / EMULSION MIST EXTRACTION SYSTEM CHIP CONVEYOR MACHINE IS / WAS OPERATED WITH EMULSION COOLANT SYSTEM HIGH PRESSURE PUMP 20 BAR THE BELT OF PART OF PRECAST ACCEPTANCE FACILITY BAR LOADER/BAR FEEDER GENERAL TECHNICAL DATA MACHINE DIMENSIONS (LXWXH) APPROX. 4940 X 3000 X 2488 MM MACHINE WEIGHT 10000 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Precio: 13.800 €
Ubicación: Land-single sided edge banding machine\r\nbrand: homag\r\ntype: optimat kr 77/a20/s2\r\nyear: 2001\r\n\r\nfor egde banding and processing from coil or as strip, up to 20mm edge thickness in lengthwise and crosswise throughfeed.\r\n\r\ntop pressure:\r\n- with driven joined v-belt\r\n- motoric height adjustable with digital position indicator\r\n\r\ncontrol nc21:\r\n- grafic surface for easy programming\r\n\r\ntechnical data:\r\n- feed stepless controllable 18 - 24 m/min.\r\n\r\n- workpiece thickness 12 - 60 mm\r\n- edge material strips max. 0,4 - 20 mm\r\n- edge material coi 0,3 - 3 mm\r\n\r\nrough milling unit\r\n2 motors each 3 kw, 150 hz., 9000 1/min.\r\n\r\nworkpiece pre-heating\r\nto heat the workpiece edge in front of the glue application for a better banding quality\r\n\r\ngluing unit a20:\r\nhotmelt qa34\r\nmelting unit with granulate tank\r\n\r\npressure zone c\r\n1 driven pre-pressure roller Ø. 150 mm\r\n6 post-pressure rollers Ø. 70 mm\r\n\r\nenn trimming unit hl83 chamfer/straight\r\n2 motors each 0,5 kw, 200 hz., 12000 1/min.\r\n\r\nchip transport belt for optimat\r\n\r\npre-milling unit 1,5 kw optimat\r\n2 motors one above the other each 1,5 kw, 200 hz., 12000 1/min.\r\n\r\nform milling unit fk 13 8-fold automatical\r\nto process the workpiece overhang on the worpiece top and bottom edge as well\r\nfor the milling of the frontal an rear workpiece edge in cooperation with end trimming and pre-milling unit.\r\n2 motors each 0,55 kw, 200 hz., 12000 1/min.\r\nautomatical 8-fold tool changer.\r\n\r\nuniversal milling unit 4 kw controlled optimat\r\ninstalled on the rear side at milling stand.\r\ncros support with spindle adjustment.\r\n1 motor 4 kw, 150 hz., 9000 1/min.\r\nswivable max. 90 degrees.\r\nincl. intermediate support electro pneumatical controlled\r\n\r\nmulti-post cleaning device mn 21 automatc\r\nfor max. 3 different profiles.\r\ntracing from top, bottom and side to chamfer milling or rounding from pre-milled pvc-edges.\r\nblowing nozzles electro pneumatical controlled.\r\n\r\npost cleaning device glued joint\r\nremove of glue rests in the area of the glued joint. tracing from top and bottom.\r\n\r\n\r\nnote:\r\nthe specifications and descriptions are a copy of the order confirmation at that time. datas are for information and are not binding.\r\n SINGLE SIDED EDGE BANDING MACHINE\R\NBRAND: HOMAG\R\NTYPE: OPTIMAT KR 77/A20/S2\R\NYEAR: 2001\R\N\R\NFOR EGDE BANDING AND PROCESSING FROM COIL OR AS STRIP, UP TO 20MM EDGE THICKNESS IN LENGTHWISE AND CROSSWISE THROUGHFEED.\R\N\R\NTOP PRESSURE:\R\N- WITH DRIVEN JOINED V-BELT\R\N- MOTORIC HEIGHT ADJUSTABLE WITH DIGITAL POSITION INDICATOR\R\N\R\NCONTROL NC21:\R\N- GRAFIC SURFACE FOR EASY PROGRAMMING\R\N\R\NTECHNICAL DATA:\R\N- FEED STEPLESS CONTROLLABLE 18 - 24 M/MIN.\R\N\R\N- WORKPIECE THICKNESS 12 - 60 MM\R\N- EDGE MATERIAL STRIPS MAX. 0,4 - 20 MM\R\N- EDGE MATERIAL COI 0,3 - 3 MM\R\N\R\NROUGH MILLING UNIT\R\N2 MOTORS EACH 3 KW, 150 HZ., 9000 1/MIN.\R\N\R\NWORKPIECE PRE-HEATING\R\NTO HEAT THE WORKPIECE EDGE IN FRONT OF THE GLUE APPLICATION FOR A BETTER BANDING QUALITY\R\N\R\NGLUING UNIT A20:\R\NHOTMELT QA34\R\NMELTING UNIT WITH GRANULATE TANK\R\N\R\NPRESSURE ZONE C\R\N1 DRIVEN PRE-PRESSURE ROLLER Ø. 150 MM\R\N6 POST-PRESSURE ROLLERS Ø. 70 MM\R\N\R\NENN TRIMMING UNIT HL83 CHAMFER/STRAIGHT\R\N2 MOTORS EACH 0,5 KW, 200 HZ., 12000 1/MIN.\R\N\R\NCHIP TRANSPORT BELT FOR OPTIMAT\R\N\R\NPRE-MILLING UNIT 1,5 KW OPTIMAT\R\N2 MOTORS ONE ABOVE THE OTHER EACH 1,5 KW, 200 HZ., 12000 1/MIN.\R\N\R\NFORM MILLING UNIT FK 13 8-FOLD AUTOMATICAL\R\NTO PROCESS THE WORKPIECE OVERHANG ON THE WORPIECE TOP AND BOTTOM EDGE AS WELL\R\NFOR THE MILLING OF THE FRONTAL AN REAR WORKPIECE EDGE IN COOPERATION WITH END TRIMMING AND PRE-MILLING UNIT.\R\N2 MOTORS EACH 0,55 KW, 200 HZ., 12000 1/MIN.\R\NAUTOMATICAL 8-FOLD TOOL CHANGER.\R\N\R\NUNIVERSAL MILLING UNIT 4 KW CONTROLLED OPTIMAT\R\NINSTALLED ON THE REAR SIDE AT MILLING STAND.\R\NCROS SUPPORT WITH SPINDLE ADJUSTMENT.\R\N1 MOTOR 4 KW, 150 HZ., 9000 1/MIN.\R\NSWIVABLE MAX. 90 DEGREES.\R\NINCL. INTERMEDIATE SUPPORT ELECTRO PNEUMATICAL CONTROLLED\R\N\R\NMULTI-POST CLEANING DEVICE MN 21 AUTOMATC\R\NFOR MAX. 3 DIFFERENT PROFILES.\R\NTRACING FROM TOP, BOTTOM AND SIDE TO CHAMFER MILLING OR ROUNDING FROM PRE-MILLED PVC-EDGES.\R\NBLOWING NOZZLES ELECTRO PNEUMATICAL CONTROLLED.\R\N\R\NPOST CLEANING DEVICE GLUED JOINT\R\NREMOVE OF GLUE RESTS IN THE AREA OF THE GLUED JOINT. TRACING FROM TOP AND BOTTOM.\R\N\R\N\R\NNOTE:\R\NTHE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATAS ARE FOR INFORMATION AND ARE NOT BINDING.\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 8.100 €
Ubicación: Land-thread cutting device freischneiden device drilling depth shut off programmable drilling depth and speed display - digital thread cutter m24 (gradient-dependent) variable speed 125-2000 1 / min drilling capacity 25/30 mm spindle mk 3 drilling depth	125 mm projection of 280 mm-usable desk space (pivoting) 420 x 340 mm
feed 0-300 mm / min stepless adjustable anvil with rack machines dimensions (w x d x h) 520 x 820 x 1900 mm motor three-phase 400 v pole changing bar 1.5 / 2 kw weight 300 kg including drilling package, which includes: taper mandrel, chuck, vice and t - groove set. 
option: spindle stop and chip fracture module 690 eur delivery: free house including packaging not the right machine? 
we do also other afloat products - ask for a quote! 

flott base partner *. THREAD CUTTING DEVICE FREISCHNEIDEN DEVICE DRILLING DEPTH SHUT OFF PROGRAMMABLE DRILLING DEPTH AND SPEED DISPLAY - DIGITAL THREAD CUTTER M24 (GRADIENT-DEPENDENT) VARIABLE SPEED 125-2000 1 / MIN DRILLING CAPACITY 25/30 MM SPINDLE MK 3 DRILLING DEPTH 125 MM PROJECTION OF 280 MM-USABLE DESK SPACE (PIVOTING) 420 X 340 MM FEED 0-300 MM / MIN STEPLESS ADJUSTABLE ANVIL WITH RACK MACHINES DIMENSIONS (W X D X H) 520 X 820 X 1900 MM MOTOR THREE-PHASE 400 V POLE CHANGING BAR 1.5 / 2 KW WEIGHT 300 KG INCLUDING DRILLING PACKAGE, WHICH INCLUDES: TAPER MANDREL, CHUCK, VICE AND T - GROOVE SET. OPTION: SPINDLE STOP AND CHIP FRACTURE MODULE 690 EUR DELIVERY: FREE HOUSE INCLUDING PACKAGING NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER *.
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Ubicación: Land-edge banding machine with modern zero-joint technology for standard edge materials with functional layer\r\n\r\nsingle sided edge banding machine\r\nbrand: homag\r\ntype: optimat kal 310/8/a20/s2\r\nyear: 2007\r\nstop on the left hand side\r\nwith workpiece return\r\n\r\ntechnical data:\r\n- feed 18 m/min\r\n- working height 950 mm\r\n- working width min.:\r\n55mm at workpiece thickness 22 mm, 100 mm at workpiece thickness 60 mm\r\n(depending on the workpiece length)\r\n- workpiece overhang 30 mm\r\n- workpiece thickness 12-60 mm\r\n- edge material coil 0,3-3 mm\r\n- edge cross sectional area max. at pvc 135 mm², at veneer 100 mm²\r\n- coil-Ø max. 830 mm\r\n\r\ntransport chain 80 m wide with rubbered top\r\ntop pressure with v-belt, motorical height adjustment and digital display\r\n\r\npower control pc22 with sps-control\r\n\r\npre-milling unit\r\n- 2 motors each 3 kw\r\n\r\nworkpiece pre-heating\r\n\r\nedge gluing: \r\nhot-air-system\r\nbrand: schugoma \r\ntype: kantenking \r\n- for edge material with functional layer \r\n- functional or reacting layer same colour as the edge material \r\n- dissolved the functional or reacting layer connects edge material and workpiece\r\n\r\nautom. adjusment of pressure zone\r\n1 driven pre-pressure roller, Ø 150 mm\r\n6 post-pressure roller, Ø 70 mm\r\n\r\nedge magazine 6 rollen\r\n- edge thickness 6x3 mm\r\n- coil-Ø 6x830\r\n- rest length monitoring at 2400 mm\r\n\r\nend trimming unit hl 04 / 05\r\nfor workpieces with surface layer overhang up to max. 10 mm\r\n\r\nfeed stepless controllable 18-25 m/min\r\n\r\nsliding table 500x1600 mm\r\n\r\nrough milling unit 1,5 kw\r\n- 2 motors each 1,5 kw, one above the other \r\n\r\nform milling unit fk 13, 8-fold automatical\r\n- 2 motors each 0,4 kw\r\n\r\n600 mm empty space\r\n\r\nmulti-post-cleaning device mn21 automatical\r\n\r\nfinish unit fa11 top / bottom\r\n- post-cleaning glued joint\r\n- cleaning agent application\r\n- buffing unit\r\n\r\nset up during the transport of the next workpiece, so the machine need not to be driven until there are no workpieces in it.\r\n\r\nworkpiece return:\r\nair cushion table: 2500 mm long, 1000 mm wide about approx. 60 mm inclined positioned\r\ntransport belt: wide 900 mm\r\nnot driven roller conveyor: length 2000 mm, width 900 mm\r\nextension of roller conveyor about 500 mm\r\noverhang: approx. 250 mm\r\n\r\nbelt cleaning, single-fold\r\n\r\nworkpieces:\r\nlength 300-2500 mm or. 300-800 mm\r\nwidth 60-800 mm or. 800-2000 mm\r\nthickness 8-60 mm\r\nweight max. 50 kg\r\n\r\nnote:\r\nthe specifications and descriptions are a copy of the order confirmation at that time. data are for information and are not binding. EDGE BANDING MACHINE WITH MODERN ZERO-JOINT TECHNOLOGY FOR STANDARD EDGE MATERIALS WITH FUNCTIONAL LAYER\R\N\R\NSINGLE SIDED EDGE BANDING MACHINE\R\NBRAND: HOMAG\R\NTYPE: OPTIMAT KAL 310/8/A20/S2\R\NYEAR: 2007\R\NSTOP ON THE LEFT HAND SIDE\R\NWITH WORKPIECE RETURN\R\N\R\NTECHNICAL DATA:\R\N- FEED 18 M/MIN\R\N- WORKING HEIGHT 950 MM\R\N- WORKING WIDTH MIN.:\R\N55MM AT WORKPIECE THICKNESS 22 MM, 100 MM AT WORKPIECE THICKNESS 60 MM\R\N(DEPENDING ON THE WORKPIECE LENGTH)\R\N- WORKPIECE OVERHANG 30 MM\R\N- WORKPIECE THICKNESS 12-60 MM\R\N- EDGE MATERIAL COIL 0,3-3 MM\R\N- EDGE CROSS SECTIONAL AREA MAX. AT PVC 135 MM², AT VENEER 100 MM²\R\N- COIL-Ø MAX. 830 MM\R\N\R\NTRANSPORT CHAIN 80 M WIDE WITH RUBBERED TOP\R\NTOP PRESSURE WITH V-BELT, MOTORICAL HEIGHT ADJUSTMENT AND DIGITAL DISPLAY\R\N\R\NPOWER CONTROL PC22 WITH SPS-CONTROL\R\N\R\NPRE-MILLING UNIT\R\N- 2 MOTORS EACH 3 KW\R\N\R\NWORKPIECE PRE-HEATING\R\N\R\NEDGE GLUING: \R\NHOT-AIR-SYSTEM\R\NBRAND: SCHUGOMA \R\NTYPE: KANTENKING \R\N- FOR EDGE MATERIAL WITH FUNCTIONAL LAYER \R\N- FUNCTIONAL OR REACTING LAYER SAME COLOUR AS THE EDGE MATERIAL \R\N- DISSOLVED THE FUNCTIONAL OR REACTING LAYER CONNECTS EDGE MATERIAL AND WORKPIECE\R\N\R\NAUTOM. ADJUSMENT OF PRESSURE ZONE\R\N1 DRIVEN PRE-PRESSURE ROLLER, Ø 150 MM\R\N6 POST-PRESSURE ROLLER, Ø 70 MM\R\N\R\NEDGE MAGAZINE 6 ROLLEN\R\N- EDGE THICKNESS 6X3 MM\R\N- COIL-Ø 6X830\R\N- REST LENGTH MONITORING AT 2400 MM\R\N\R\NEND TRIMMING UNIT HL 04 / 05\R\NFOR WORKPIECES WITH SURFACE LAYER OVERHANG UP TO MAX. 10 MM\R\N\R\NFEED STEPLESS CONTROLLABLE 18-25 M/MIN\R\N\R\NSLIDING TABLE 500X1600 MM\R\N\R\NROUGH MILLING UNIT 1,5 KW\R\N- 2 MOTORS EACH 1,5 KW, ONE ABOVE THE OTHER \R\N\R\NFORM MILLING UNIT FK 13, 8-FOLD AUTOMATICAL\R\N- 2 MOTORS EACH 0,4 KW\R\N\R\N600 MM EMPTY SPACE\R\N\R\NMULTI-POST-CLEANING DEVICE MN21 AUTOMATICAL\R\N\R\NFINISH UNIT FA11 TOP / BOTTOM\R\N- POST-CLEANING GLUED JOINT\R\N- CLEANING AGENT APPLICATION\R\N- BUFFING UNIT\R\N\R\NSET UP DURING THE TRANSPORT OF THE NEXT WORKPIECE, SO THE MACHINE NEED NOT TO BE DRIVEN UNTIL THERE ARE NO WORKPIECES IN IT.\R\N\R\NWORKPIECE RETURN:\R\NAIR CUSHION TABLE: 2500 MM LONG, 1000 MM WIDE ABOUT APPROX. 60 MM INCLINED POSITIONED\R\NTRANSPORT BELT: WIDE 900 MM\R\NNOT DRIVEN ROLLER CONVEYOR: LENGTH 2000 MM, WIDTH 900 MM\R\NEXTENSION OF ROLLER CONVEYOR ABOUT 500 MM\R\NOVERHANG: APPROX. 250 MM\R\N\R\NBELT CLEANING, SINGLE-FOLD\R\N\R\NWORKPIECES:\R\NLENGTH 300-2500 MM OR. 300-800 MM\R\NWIDTH 60-800 MM OR. 800-2000 MM\R\NTHICKNESS 8-60 MM\R\NWEIGHT MAX. 50 KG\R\N\R\NNOTE:\R\NTHE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATA ARE FOR INFORMATION AND ARE NOT BINDING.
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 7.990 €
Ubicación: Land-thread cutting device
freischneiden setup
drilling depth shut off programmable
drilling depth and speed display - digital
thread cutter m20 (depending on elevation)
variable speed of 125-4000 u/mon in two stages, stage change of belt apportionment.
drilling capacity 25/30 mm
spindle mk 3
drilling depth 125 mm
projection 280 mm
usable surface (pivoting) 420 x 340 mm
feed 0-300 mm / min stepless
table height with rack and pinion
machine dimensions (w x d x h) 520 x 820 x 1900 mm
motor three-phase 400 v pole changing bar 0.9 / 1.45 kw
weight 300 kg

including drilling package consisting: taper mandrel, chuck, vice and t - groove set. 

option: spindle stop and chip fracture module 690 eur

delivery: free house including packaging

not the right machine?
we do also other afloat products - ask for a quote!

flott base partner *.
 THREAD CUTTING DEVICE FREISCHNEIDEN SETUP DRILLING DEPTH SHUT OFF PROGRAMMABLE DRILLING DEPTH AND SPEED DISPLAY - DIGITAL THREAD CUTTER M20 (DEPENDING ON ELEVATION) VARIABLE SPEED OF 125-4000 U/MON IN TWO STAGES, STAGE CHANGE OF BELT APPORTIONMENT. DRILLING CAPACITY 25/30 MM SPINDLE MK 3 DRILLING DEPTH 125 MM PROJECTION 280 MM USABLE SURFACE (PIVOTING) 420 X 340 MM FEED 0-300 MM / MIN STEPLESS TABLE HEIGHT WITH RACK AND PINION MACHINE DIMENSIONS (W X D X H) 520 X 820 X 1900 MM MOTOR THREE-PHASE 400 V POLE CHANGING BAR 0.9 / 1.45 KW WEIGHT 300 KG INCLUDING DRILLING PACKAGE CONSISTING: TAPER MANDREL, CHUCK, VICE AND T - GROOVE SET. OPTION: SPINDLE STOP AND CHIP FRACTURE MODULE 690 EUR DELIVERY: FREE HOUSE INCLUDING PACKAGING NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER *.
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Ubicación: Land-amtec flowwrap f150-2xl80gn - 1 rotary knife - guiding device - new design<br><br>flowwrap machine - new design - for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. film supply from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 480mm | 1 rotating knife | 220v, 2.8kw | no compressed air required | max. speed of the machine in neutral: 150 cycles/min | max. bag (not product) dimensions (mm): l(100-450)xw(50-210)xh(0-80) | machine dimensions (mm): l3990xw900xh1468 | weight (net/gross): 900/950kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F150-2XL80GN - 1 ROTARY KNIFE - GUIDING DEVICE - NEW DESIGN

FLOWWRAP MACHINE - NEW DESIGN - FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, LARGE PRODUCTS. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. FILM SUPPLY FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 480MM | 1 ROTATING KNIFE | 220V, 2.8KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 150 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(100-450)XW(50-210)XH(0-80) | MACHINE DIMENSIONS (MM): L3990XW900XH1468 | WEIGHT (NET/GROSS): 900/950KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Precio: 3.900 €
Ubicación: Land-heavy iron stand for viibrationsfreies work, swivel spindle 45 degree swiveling,.
electric height and swivel adjustment with digital display, aigner stop. in-side table extensions, frã¤spindel 40 mm, various accessories, great condition, made in germany-
 HEAVY IRON STAND FOR VIIBRATIONSFREIES WORK, SWIVEL SPINDLE 45 DEGREE SWIVELING,. ELECTRIC HEIGHT AND SWIVEL ADJUSTMENT WITH DIGITAL DISPLAY, AIGNER STOP. IN-SIDE TABLE EXTENSIONS, FR&ATILDE;&CURREN;SPINDEL 40 MM, VARIOUS ACCESSORIES, GREAT CONDITION, MADE IN GERMANY-
Vendedor: voelkel-hightech
Año de construcción: usado
Ubicación: Land-amtec flowwrap f40-2xl110gpn - 1 pendular knife - guiding device - new design<br><br>flowwrap machine - new design - for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. film feed from the top. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 600mm | 1 pendular knife | 220v, 3.6kw | no compressed air required | max. speed of the machine in neutral: 40 cycles/min | max. bag (not product) dimensions (mm): l(120-450)xw(50-200)xh(10-110) | machine dimensions (mm): l4380xw970xh1500 | weight (net/gross): 1160/1260kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F40-2XL110GPN - 1 PENDULAR KNIFE - GUIDING DEVICE - NEW DESIGN

FLOWWRAP MACHINE - NEW DESIGN - FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, LARGE PRODUCTS. FILM FEED FROM THE TOP. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 600MM | 1 PENDULAR KNIFE | 220V, 3.6KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 40 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(120-450)XW(50-200)XH(10-110) | MACHINE DIMENSIONS (MM): L4380XW970XH1500 | WEIGHT (NET/GROSS): 1160/1260KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-pet compressor atelier francois ce68a 35 m3/h

this three stage intercooled high pressure compressor was build in year 2005 and it is till installed but operation was stopped in year 2014. this compressor is very slow speed and it has only two cross-head assemblies, two connecting rods and associated bearings. there is no piston rod packing on 3rd stage, which eliminate sealing against 40 bar. single acting 2nd and 3rd stage, requiring few valves. smaller 2nd and 3rd stages are horizontal position to optimize the piston ring life. the delivery includes stainless steel 40 bar air dyer with integrated 1 micron filter, dew point alarm and bekomat drain system and vertical hot galvanized 40 bar air receiver and control cabinet with af pc control system.

technical data:
manufacturer atelier francois belgium
manufacturing year 2005
fad (free air delivery) 35 m3/min at 40 bar
compressor rotation speed 480 rpm
electric motor 355 kw   PET COMPRESSOR ATELIER FRANCOIS CE68A 35 M3/H THIS THREE STAGE INTERCOOLED HIGH PRESSURE COMPRESSOR WAS BUILD IN YEAR 2005 AND IT IS TILL INSTALLED BUT OPERATION WAS STOPPED IN YEAR 2014. THIS COMPRESSOR IS VERY SLOW SPEED AND IT HAS ONLY TWO CROSS-HEAD ASSEMBLIES, TWO CONNECTING RODS AND ASSOCIATED BEARINGS. THERE IS NO PISTON ROD PACKING ON 3RD STAGE, WHICH ELIMINATE SEALING AGAINST 40 BAR. SINGLE ACTING 2ND AND 3RD STAGE, REQUIRING FEW VALVES. SMALLER 2ND AND 3RD STAGES ARE HORIZONTAL POSITION TO OPTIMIZE THE PISTON RING LIFE. THE DELIVERY INCLUDES STAINLESS STEEL 40 BAR AIR DYER WITH INTEGRATED 1 MICRON FILTER, DEW POINT ALARM AND BEKOMAT DRAIN SYSTEM AND VERTICAL HOT GALVANIZED 40 BAR AIR RECEIVER AND CONTROL CABINET WITH AF PC CONTROL SYSTEM. TECHNICAL DATA: MANUFACTURER ATELIER FRANCOIS BELGIUM MANUFACTURING YEAR 2005 FAD (FREE AIR DELIVERY) 35 M3/MIN AT 40 BAR COMPRESSOR ROTATION SPEED 480 RPM ELECTRIC MOTOR 355 KW
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec flowwrap f80-xl80gpn - 1 pendular knife - guiding device - new design<br><br>flowwrap machine - new design - for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. film feed from the top. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 450mm | 1 pendular knife | 220v, 3.2kw | no compressed air required | max. speed of the machine in neutral: 80 cycles/min | max. bag (not product): dimensions (mm): l(120-450)xw(50-160)xh(10-80) | machine dimensions (mm): l4380xw870xh1500 | weight (net/gross): 960/1060kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F80-XL80GPN - 1 PENDULAR KNIFE - GUIDING DEVICE - NEW DESIGN

FLOWWRAP MACHINE - NEW DESIGN - FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, MEDIUM/LARGER PRODUCTS. FILM FEED FROM THE TOP. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 450MM | 1 PENDULAR KNIFE | 220V, 3.2KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 80 CYCLES/MIN | MAX. BAG (NOT PRODUCT): DIMENSIONS (MM): L(120-450)XW(50-160)XH(10-80) | MACHINE DIMENSIONS (MM): L4380XW870XH1500 | WEIGHT (NET/GROSS): 960/1060KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-gebr. band saw machine make knuth
	abs model 450 b. no.: 147051 year of production 2008

cutting power:
	around 450 mm
		square 450 x 450 mm
	stepless cutting speed 20-100 m / min
	how to contact with length stop 500 mm
	band size 6000 x 41 x 1,3 mm
	main engine power up to 3 kw
	hydraulic 1,1 kw
	feed motor 0,25 kw
	coolant pump 0.12 kw
	external dimensions:
	width 3400 mm
		depth 1500 mm
		height 1900 mm
	weight approx.		1800 kg
	with:
	highway 2500 mm
		roll feed

GEBR. BAND SAW MACHINE MAKE KNUTH ABS MODEL 450 B. NO.: 147051 YEAR OF PRODUCTION 2008 CUTTING POWER: AROUND 450 MM SQUARE 450 X 450 MM STEPLESS CUTTING SPEED 20-100 M / MIN HOW TO CONTACT WITH LENGTH STOP 500 MM BAND SIZE 6000 X 41 X 1,3 MM MAIN ENGINE POWER UP TO 3 KW HYDRAULIC 1,1 KW FEED MOTOR 0,25 KW COOLANT PUMP 0.12 KW EXTERNAL DIMENSIONS: WIDTH 3400 MM DEPTH 1500 MM HEIGHT 1900 MM WEIGHT APPROX. 1800 KG WITH: HIGHWAY 2500 MM ROLL FEED
Vendedor: RUDOLF BANDMANN WERKZEUGMASCHINEN e.K.
Año de construcción: usado
Ubicación: Land-amtec flowwrap f80-2xl80gpn - 1 pendular knife - guiding device - new design<br><br>flowwrap machine - new design - for very economic high speed opp film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. film feed from the top. infeed table with automatic transport through pushers into the machine. special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. automatic folding and sealing. print mark sensor included. pid temperature control. machine stopping in selected position to avoid film sticking to the knife. optional: gas flushing device. - technical specifications: max. film width: 600mm | 1 pendular knife | 220v, 3.6kw | no compressed air required | max. speed of the machine in neutral: 80 cycles/min | max. bag (not product) dimensions (mm): l(120-450)xw(50-200)xh(10-80) | machine dimensions (mm): l4380xw970xh1500 | weight (net/gross): 1160/1260kg. the machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the opp film.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FLOWWRAP F80-2XL80GPN - 1 PENDULAR KNIFE - GUIDING DEVICE - NEW DESIGN

FLOWWRAP MACHINE - NEW DESIGN - FOR VERY ECONOMIC HIGH SPEED OPP FILM PACKAGING (CLEAR, PRINTED OR LAMINATED) OF ONE OR MORE, EVENLY OR UNREGULAR SHAPED, DRY, LARGE PRODUCTS. FILM FEED FROM THE TOP. INFEED TABLE WITH AUTOMATIC TRANSPORT THROUGH PUSHERS INTO THE MACHINE. SPECIAL GUIDING DEVICE TO ALLOW SECURE TRANSPORT OF PRODUCT THROUGH THE MACHINE: BRUSH BELT (OR SIMILAR) HOLDS THE PRODUCT FROM THE TOP. AUTOMATIC FOLDING AND SEALING. PRINT MARK SENSOR INCLUDED. PID TEMPERATURE CONTROL. MACHINE STOPPING IN SELECTED POSITION TO AVOID FILM STICKING TO THE KNIFE. OPTIONAL: GAS FLUSHING DEVICE. - TECHNICAL SPECIFICATIONS: MAX. FILM WIDTH: 600MM | 1 PENDULAR KNIFE | 220V, 3.6KW | NO COMPRESSED AIR REQUIRED | MAX. SPEED OF THE MACHINE IN NEUTRAL: 80 CYCLES/MIN | MAX. BAG (NOT PRODUCT) DIMENSIONS (MM): L(120-450)XW(50-200)XH(10-80) | MACHINE DIMENSIONS (MM): L4380XW970XH1500 | WEIGHT (NET/GROSS): 1160/1260KG. THE MACHINE HAS TO OPERATE WITH MINIMUN OF 30 CYCLES PER MINUTE TO AVOID PREMATURE MELTING OF THE OPP FILM.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more G types: