204 ofertas

Año de construcción: usado
Ubicación: Land-cnc turning-milling center goodway gts 100 mmx, fanuc 18t, year 2001
lathe

schwingdurchm: 430 mm
drehdurchm. : 180 mm
stangendurchm. : 42 mm
turning length: 250 mm
drive: 18.5 kw
counter spindle: yes
speed: 5000 1/min
rapid traverse rate: 30 m / min
c axis: 2
three-jaw chuck: collet
driven tools, 2 x 12 bmt 55 x,
weight: 7500 kg

with angetr incl. interface, various. tools and holders
chip conveyor... magazine
machine was tech. tested CNC TURNING-MILLING CENTER GOODWAY GTS 100 MMX, FANUC 18T, YEAR 2001 LATHE SCHWINGDURCHM: 430 MM DREHDURCHM. : 180 MM STANGENDURCHM. : 42 MM TURNING LENGTH: 250 MM DRIVE: 18.5 KW COUNTER SPINDLE: YES SPEED: 5000 1/MIN RAPID TRAVERSE RATE: 30 M / MIN C AXIS: 2 THREE-JAW CHUCK: COLLET DRIVEN TOOLS, 2 X 12 BMT 55 X, WEIGHT: 7500 KG WITH ANGETR INCL. INTERFACE, VARIOUS. TOOLS AND HOLDERS CHIP CONVEYOR... MAGAZINE MACHINE WAS TECH. TESTED
Vendedor: Khajavi-Tai Maschinenvermittlung
Año de construcción: usado
Ubicación: Land-make typhoon, no 89ty223-2, new 1989, floorspace 0,45x0,45 m, stirrer on stand (1x), material stainless steel , shaft length 600mm, sizes stirring head dia. 88mm, number of stirrers on shaft 1, motor 0,55 kw, 220/380 volt, speed mixing shaft 1400 rpm, mounted on support , adjustable height , total height 1,5 mstirrersmixers > stirrers what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE TYPHOON, NO 89TY223-2, NEW 1989, FLOORSPACE 0,45X0,45 M, STIRRER ON STAND (1X), MATERIAL STAINLESS STEEL , SHAFT LENGTH 600MM, SIZES STIRRING HEAD DIA. 88MM, NUMBER OF STIRRERS ON SHAFT 1, MOTOR 0,55 KW, 220/380 VOLT, SPEED MIXING SHAFT 1400 RPM, MOUNTED ON SUPPORT , ADJUSTABLE HEIGHT , TOTAL HEIGHT 1,5 MSTIRRERSMIXERS > STIRRERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 450 €
Ubicación: Land-cup & cool device from wmf, model: 03.9019, year: 2008.
off glass and stainless steel with marbled base (refrigerator for milk. top 2 anblagen for the coffee cups or mugs.
134a refrigerant. suitable for 4 litres of milk. ser. no.: 02235
dimensions: 270x520x620mm, elek. voltage: 230v, elek. power: 105w.

the mismatch?
we resolve our camp and have very many, cheap deals for devices from the fields of gastro, restaurant and canteen kitchens, just make a request. CUP & COOL DEVICE FROM WMF, MODEL: 03.9019, YEAR: 2008. OFF GLASS AND STAINLESS STEEL WITH MARBLED BASE (REFRIGERATOR FOR MILK. TOP 2 ANBLAGEN FOR THE COFFEE CUPS OR MUGS. 134A REFRIGERANT. SUITABLE FOR 4 LITRES OF MILK. SER. NO.: 02235 DIMENSIONS: 270X520X620MM, ELEK. VOLTAGE: 230V, ELEK. POWER: 105W. THE MISMATCH? WE RESOLVE OUR CAMP AND HAVE VERY MANY, CHEAP DEALS FOR DEVICES FROM THE FIELDS OF GASTRO, RESTAURANT AND CANTEEN KITCHENS, JUST MAKE A REQUEST.
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Precio: 8.900 €
Ubicación: Land-; gross weight [kg]: 2300; registration number: uj1dl22nx3dk12231; rear tyres remaining: 60; front tyres remaining: 60; maximum lift capacity [kg]: 200 ; GROSS WEIGHT [KG]: 2300; REGISTRATION NUMBER: UJ1DL22NX3DK12231; REAR TYRES REMAINING: 60; FRONT TYRES REMAINING: 60; MAXIMUM LIFT CAPACITY [KG]: 200
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-cnc turning-milling center goodway gts 260 mmx, fanuc 18, year 2003
lathe schwingdurchm: 630 mm drehdurchm. : 280 mm
stangendurchm. : 60 mm
turning length: 250 mm
drive: 18.5 kw
counter spindle: yes
speed: 3500 1/min
rapid traverse rate: 30 m / min
c axis: 2 three-jaw chuck: 208 /175 mm
driven tools, 2 x 12 bmt 55 x,
weight: 7500 kg

with angetr incl. interface, various. tools and holders
chip conveyor.
machine was tech. tested 
 CNC TURNING-MILLING CENTER GOODWAY GTS 260 MMX, FANUC 18, YEAR 2003 LATHE SCHWINGDURCHM: 630 MM DREHDURCHM. : 280 MM STANGENDURCHM. : 60 MM TURNING LENGTH: 250 MM DRIVE: 18.5 KW COUNTER SPINDLE: YES SPEED: 3500 1/MIN RAPID TRAVERSE RATE: 30 M / MIN C AXIS: 2 THREE-JAW CHUCK: 208 /175 MM DRIVEN TOOLS, 2 X 12 BMT 55 X, WEIGHT: 7500 KG WITH ANGETR INCL. INTERFACE, VARIOUS. TOOLS AND HOLDERS CHIP CONVEYOR. MACHINE WAS TECH. TESTED
Vendedor: Khajavi-Tai Maschinenvermittlung
Año de construcción: usado
Ubicación: Land-lifting cap. 600 kg, 1 speed, \r\ntip-height variable max. 2230 mm LIFTING CAP. 600 KG, 1 SPEED, \R\NTIP-HEIGHT VARIABLE MAX. 2230 MM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-evaporative condenser bac vxc 1240 - 4984 kw
 
this evaporative refrigerant (nh3) condenser was delivered by bac france in 2009 but it was never installed. this unit has four separate forced draught, curved plate and belt driven centrifugal fans which are very quiet and energy saving. equipment is suitable for various chiller applications with cooling capacity up to 4984 kw. the equipment is in excellent, new like condition.
 
 
general data:
condensing capacity 4984 kw
refrigerant nh3 - r717
dew point 35.0 ° c
wet -bulb temperature 21.0 ° c - working wet
 
 
technical characteristics
overall length 12233 mm
overall width 3000 mm
total height 4310 mm
shipping / operating weight / 20380/ 25240 kg
weight of the heaviest section 7010 kg
number of fan motors and power 4 x 5.5 k / 1500 rpm
circulation pumps 2 x 4.0 kw
the maximum evaporation 1,797 l / s@ 4984.0 kw
noise level at full load 61 db(a) at 15 meters   EVAPORATIVE CONDENSER BAC VXC 1240 - 4984 KW THIS EVAPORATIVE REFRIGERANT (NH3) CONDENSER WAS DELIVERED BY BAC FRANCE IN 2009 BUT IT WAS NEVER INSTALLED. THIS UNIT HAS FOUR SEPARATE FORCED DRAUGHT, CURVED PLATE AND BELT DRIVEN CENTRIFUGAL FANS WHICH ARE VERY QUIET AND ENERGY SAVING. EQUIPMENT IS SUITABLE FOR VARIOUS CHILLER APPLICATIONS WITH COOLING CAPACITY UP TO 4984 KW. THE EQUIPMENT IS IN EXCELLENT, NEW LIKE CONDITION. GENERAL DATA: CONDENSING CAPACITY 4984 KW REFRIGERANT NH3 - R717 DEW POINT 35.0 ° C WET -BULB TEMPERATURE 21.0 ° C - WORKING WET TECHNICAL CHARACTERISTICS OVERALL LENGTH 12233 MM OVERALL WIDTH 3000 MM TOTAL HEIGHT 4310 MM SHIPPING / OPERATING WEIGHT / 20380/ 25240 KG WEIGHT OF THE HEAVIEST SECTION 7010 KG NUMBER OF FAN MOTORS AND POWER 4 X 5.5 K / 1500 RPM CIRCULATION PUMPS 2 X 4.0 KW THE MAXIMUM EVAPORATION 1,797 L / S@ 4984.0 KW NOISE LEVEL AT FULL LOAD 61 DB(A) AT 15 METERS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec vertiwrap auto dosing machine for fruits, vegetables, etc.<br><br>auto dosing machine to dose agricultural products (potatoes, onions, etc.) into knitted sleeves, boxes, pallets, bags or cases. the products shall be cleaned and sorted out to have a smooth and trouble free operation. <br><br>- specifications: min. - max. size of fruits (mm): 20-120 | 70-liter hopper (~ 50kg potatoes with sizes of 70-90mm) | dosing weights: 3-50kg (in steps of 0.01kg) | 2 parallel feeding conveyors (one for main volume, one for final fine filling) | max. speed of the machine in neutral: 6 cycles/minute | machine dimensions: l2800xw790xh2232mm | weight: 380kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP AUTO DOSING MACHINE FOR FRUITS, VEGETABLES, ETC.

AUTO DOSING MACHINE TO DOSE AGRICULTURAL PRODUCTS (POTATOES, ONIONS, ETC.) INTO KNITTED SLEEVES, BOXES, PALLETS, BAGS OR CASES. THE PRODUCTS SHALL BE CLEANED AND SORTED OUT TO HAVE A SMOOTH AND TROUBLE FREE OPERATION.

- SPECIFICATIONS: MIN. - MAX. SIZE OF FRUITS (MM): 20-120 | 70-LITER HOPPER (~ 50KG POTATOES WITH SIZES OF 70-90MM) | DOSING WEIGHTS: 3-50KG (IN STEPS OF 0.01KG) | 2 PARALLEL FEEDING CONVEYORS (ONE FOR MAIN VOLUME, ONE FOR FINAL FINE FILLING) | MAX. SPEED OF THE MACHINE IN NEUTRAL: 6 CYCLES/MINUTE | MACHINE DIMENSIONS: L2800XW790XH2232MM | WEIGHT: 380KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-gildemeister ctx 600 year 1994
centre distance 2238 mm
number of driven tool stations: 6 pieces
total number of tool stations: 12 pieces
 GILDEMEISTER CTX 600 YEAR 1994 CENTRE DISTANCE 2238 MM NUMBER OF DRIVEN TOOL STATIONS: 6 PIECES TOTAL NUMBER OF TOOL STATIONS: 12 PIECES
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-amtec fillingmachine stand-alone auger filler 10-10.000g load cell - dual speed<br><br>stand-alone auger filler with weight feedback via load cell and dual speed filling (fast volume filling and then slow accurracy top up), including pneumatic flap to stop product after filling and including dustproof cover. siemens plc controlled with siemens touch screen. <br><br>- specifications: hopper volume: 70 liter | filling weight: 100-10.000g | stainless steel version with servo motor | packing accuracy: less than +/-2g (at 10-1.000g), 0-0.2% (at 1.000g and more) (depending on product and total weight) | max. speed of the machine in neutral: 30 cycles/min | power: 380v, 2.7kw | machine dimensions: l1030xw850xh2400mm | weight: 350kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC FILLINGMACHINE STAND-ALONE AUGER FILLER 10-10.000G LOAD CELL - DUAL SPEED

STAND-ALONE AUGER FILLER WITH WEIGHT FEEDBACK VIA LOAD CELL AND DUAL SPEED FILLING (FAST VOLUME FILLING AND THEN SLOW ACCURRACY TOP UP), INCLUDING PNEUMATIC FLAP TO STOP PRODUCT AFTER FILLING AND INCLUDING DUSTPROOF COVER. SIEMENS PLC CONTROLLED WITH SIEMENS TOUCH SCREEN.

- SPECIFICATIONS: HOPPER VOLUME: 70 LITER | FILLING WEIGHT: 100-10.000G | STAINLESS STEEL VERSION WITH SERVO MOTOR | PACKING ACCURACY: LESS THAN +/-2G (AT 10-1.000G), 0-0.2% (AT 1.000G AND MORE) (DEPENDING ON PRODUCT AND TOTAL WEIGHT) | MAX. SPEED OF THE MACHINE IN NEUTRAL: 30 CYCLES/MIN | POWER: 380V, 2.7KW | MACHINE DIMENSIONS: L1030XW850XH2400MM | WEIGHT: 350KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-mfg.-no. f1031f, width max. 4,000 mm, cap. 2,300 kg, stroke 445 mm, pressure max. 300 bar, speed max. 95 m/s, machine weight 19,200 kg, cnc-controlled backgauge, 6-axis, autom. bending aid, laser safety devices, control trumpf type tasc 6000, operating hours 26787.
de:
cnc-abkantpresse, fabr. trumpf, typ trubend 5230, bj. 2008, ser.-nr. b0508a0153, fabr.-nr. f1031f, arbeitsbreite max. 4.000 mm, presskraft max. 2.300 kg, hub max. 445 mm, betriebsdruck max. 300 bar, nachlaufzeit max. 95 ms, maschinengewicht 19.200 kg, ausstattung: cnc-gesteuerter hinteranschlag, 6-achsig, autom. biegehilfe, laser-sicherheitseinrichtungen, steuerung, fabr. trumpf, typ tasc 6000, abgel. betriebsstd. maschine ein 26787, laufzeit hydraulik 12223, laufzeit pressbalken 1672, zyklenpressbalken 1453092, laufzeit bombierung 193, zyklenbombierung 411603
 MFG.-NO. F1031F, WIDTH MAX. 4,000 MM, CAP. 2,300 KG, STROKE 445 MM, PRESSURE MAX. 300 BAR, SPEED MAX. 95 M/S, MACHINE WEIGHT 19,200 KG, CNC-CONTROLLED BACKGAUGE, 6-AXIS, AUTOM. BENDING AID, LASER SAFETY DEVICES, CONTROL TRUMPF TYPE TASC 6000, OPERATING HOURS 26787. DE: CNC-ABKANTPRESSE, FABR. TRUMPF, TYP TRUBEND 5230, BJ. 2008, SER.-NR. B0508A0153, FABR.-NR. F1031F, ARBEITSBREITE MAX. 4.000 MM, PRESSKRAFT MAX. 2.300 KG, HUB MAX. 445 MM, BETRIEBSDRUCK MAX. 300 BAR, NACHLAUFZEIT MAX. 95 MS, MASCHINENGEWICHT 19.200 KG, AUSSTATTUNG: CNC-GESTEUERTER HINTERANSCHLAG, 6-ACHSIG, AUTOM. BIEGEHILFE, LASER-SICHERHEITSEINRICHTUNGEN, STEUERUNG, FABR. TRUMPF, TYP TASC 6000, ABGEL. BETRIEBSSTD. MASCHINE EIN 26787, LAUFZEIT HYDRAULIK 12223, LAUFZEIT PRESSBALKEN 1672, ZYKLENPRESSBALKEN 1453092, LAUFZEIT BOMBIERUNG 193, ZYKLENBOMBIERUNG 411603
Vendedor: Hilco
Año de construcción: usado
Precio: 4.950 €
Ubicación: Land-table dimensions: 2000,900 mm<br/>motor output: 7,5 kw<br/>spindle diameter: 30 mm<br/>reus: 6000/9000/11000 u/min<br/><br/><br/><br/><br/> TABLE DIMENSIONS: 2000,900 MM
MOTOR OUTPUT: 7,5 KW
SPINDLE DIAMETER: 30 MM
REUS: 6000/9000/11000 U/MIN




Vendedor: Rauscher & Reyhing GmbH
Año de construcción: usado
Ubicación: Land-we sell the following used generators 2x :
 
gas generator catterpillar  2x
2 units: caterpillar 3532 
engine : 3516 stta 
alternator : sr4
hours : 42 000 
kva : 2237  x2 total kva  4 474 
kw : 20 80 x2 
year :2001 
serial num : 8jz 
complete power plant  control panel silencer transformer …..
good condition   available now 
price ex works france loaded on truck
they are disassembled ready to loaded
best regards 

sale & purchase used generators diesel and gas
chillers – electrical equipment

 WE SELL THE FOLLOWING USED GENERATORS 2X : GAS GENERATOR CATTERPILLAR 2X 2 UNITS: CATERPILLAR 3532 ENGINE : 3516 STTA ALTERNATOR : SR4 HOURS : 42 000 KVA : 2237 X2 TOTAL KVA 4 474 KW : 20 80 X2 YEAR :2001 SERIAL NUM : 8JZ COMPLETE POWER PLANT CONTROL PANEL SILENCER TRANSFORMER ….. GOOD CONDITION AVAILABLE NOW PRICE EX WORKS FRANCE LOADED ON TRUCK THEY ARE DISASSEMBLED READY TO LOADED BEST REGARDS SALE & PURCHASE USED GENERATORS DIESEL AND GAS CHILLERS – ELECTRICAL EQUIPMENT
Vendedor: Mondial Energy Services
Año de construcción: usado
Precio: used machinery auction RESALE 360 €
Ubicación: Land-weight approx.: 120 kg<br/>dimensions (l x w x h) approx.: 1300 x 1300 x 1500 mm<br/>description: brand: work-tire<br> size: 4.50 - 10<br> ply rating: 4pr<br> other features: tubeless<br> see photos WEIGHT APPROX.: 120 KG
DIMENSIONS (L X W X H) APPROX.: 1300 X 1300 X 1500 MM
DESCRIPTION: BRAND: WORK-TIRE
SIZE: 4.50 - 10
PLY RATING: 4PR
OTHER FEATURES: TUBELESS
SEE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-we are pleased to offer: 

2006 duplo pfi twin spindle power stroke drill 

model pd223 

2 headed paper drill 

good condition. full and complete. 

available immediately. located uk. 


  WE ARE PLEASED TO OFFER: 2006 DUPLO PFI TWIN SPINDLE POWER STROKE DRILL MODEL PD223 2 HEADED PAPER DRILL GOOD CONDITION. FULL AND COMPLETE. AVAILABLE IMMEDIATELY. LOCATED UK.
Vendedor: Jerry Curtin Limited
Año de construcción: usado
Precio: used machinery auction RESALE 27.000 €
Ubicación: Land-weight approx.: 27000 kg<br/>dimensions (l x w x h) approx.: 13320 x 3520 x 2000 mm<br/>description: maximum working size 4000 x 2000 mm, 4000w laser power, 5 axes (x-y-z-u-v), 200m / min simultaneous speeds, fanuc c4000 laser generator, fanuc 16i-lb control, serial number 2008520, see photo WEIGHT APPROX.: 27000 KG
DIMENSIONS (L X W X H) APPROX.: 13320 X 3520 X 2000 MM
DESCRIPTION: MAXIMUM WORKING SIZE 4000 X 2000 MM, 4000W LASER POWER, 5 AXES (X-Y-Z-U-V), 200M / MIN SIMULTANEOUS SPEEDS, FANUC C4000 LASER GENERATOR, FANUC 16I-LB CONTROL, SERIAL NUMBER 2008520, SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 5.850 €
Ubicación: Land-on exclusive sale next 11 april 2019 at 11:00 a.m. in cazzago san martino bs
to view the lot, please contact us at 0307751645 and make an appointment.
single lot building equipment consisting of:
n. 1 fenwitch translating forklift truck (about 14.000 wh);
n. 1 automatic leveler for moba vibratory paver;
n. 1 riel starjet 200/15 high pressure washer;
n. 1 asturo compressor; n. 1 workshop equipment;
n. 1 single-valent welding machine brand siev;
n. 1 wire savior brand telwin mod. mastermig 300;
n. 1 600a battery charger; n. 1 motor-generator; n. 1 pair of traffic lights;
block of signs and various signs; n. 1 water lifting unit;
n. 1 topcon autolevel mod. at-g6; n. 1 laser for sewers brand vidalaser;
n. 1 clock for employees; n. 1 aluminium ladder with three elements;
n. 2 nebulizers; n. 1 level brand kern mod. gko-acs;
n. 1 rotary laser brand david white;
notes:
goods sold seen and liked ON EXCLUSIVE SALE NEXT 11 APRIL 2019 AT 11:00 A.M. IN CAZZAGO SAN MARTINO BS TO VIEW THE LOT, PLEASE CONTACT US AT 0307751645 AND MAKE AN APPOINTMENT. SINGLE LOT BUILDING EQUIPMENT CONSISTING OF: N. 1 FENWITCH TRANSLATING FORKLIFT TRUCK (ABOUT 14.000 WH); N. 1 AUTOMATIC LEVELER FOR MOBA VIBRATORY PAVER; N. 1 RIEL STARJET 200/15 HIGH PRESSURE WASHER; N. 1 ASTURO COMPRESSOR; N. 1 WORKSHOP EQUIPMENT; N. 1 SINGLE-VALENT WELDING MACHINE BRAND SIEV; N. 1 WIRE SAVIOR BRAND TELWIN MOD. MASTERMIG 300; N. 1 600A BATTERY CHARGER; N. 1 MOTOR-GENERATOR; N. 1 PAIR OF TRAFFIC LIGHTS; BLOCK OF SIGNS AND VARIOUS SIGNS; N. 1 WATER LIFTING UNIT; N. 1 TOPCON AUTOLEVEL MOD. AT-G6; N. 1 LASER FOR SEWERS BRAND VIDALASER; N. 1 CLOCK FOR EMPLOYEES; N. 1 ALUMINIUM LADDER WITH THREE ELEMENTS; N. 2 NEBULIZERS; N. 1 LEVEL BRAND KERN MOD. GKO-ACS; N. 1 ROTARY LASER BRAND DAVID WHITE; NOTES: GOODS SOLD SEEN AND LIKED
Vendedor: Mercury Auctions s.r.l.
Año de construcción: usado
Ubicación: Land-overview technical data paper sorting line <br/>manufacturer bollegraaf<br/>year of construction 1999<br/>throughput rate 3 up to 6 tons/h, depending on material<br/>installation dimensions 10,000 x 19,000 x 8,000 mm (l x w x h)<br/>sorting cabin 6,500 x 4,900 x 3,150 mm (l x w x h), 4 sorting places, 6 disposal chutes, 4 bunker belts<br/><br/>1 piece feeding belt to the sorting line hbt 600-800 * 14.006 mm ? 30°<br/>1 piece sorting belt hbgt 800 * 15,000 mm ? 10° -0°<br/>4 pieces bunker belts hbt 800 /1,000 * 10,940 mm<br/><br/>comments: the sorting line was used for sorting paper fractions, but can also be used for various other sorting operations. the machines are in good condition and can be inspected at our warehouse.  further pictures and technical drawings are available on request.<br/> <br/>detailed information to the individual machines. <br/>technical data sorting cabin <br/>manufacturer bollegraaf<br/>equipment features 4 sorting places, 6 disposal chutes, 4 bunker belts<br/>assembly dimensions 6,500 x 4,900 x 3,150 mm (l x w x h)<br/>assembly area 72 m²<br/>construction modular construction with two doors and two rows of windows <br/>wall type sepalux 0-70-sp<br/>wall thickness 70 mm<br/>modul width 1,200 mm<br/> <br/>technical data feeding conveyor to the sorting belt, 1 piece <br/>manufacturer bollegraaf <br/>type hbt 600-800 * 14,006 mm 30°<br/>year of construction 1999<br/>driving motor 1,5 kw<br/>belt speed 1,5 up to 5,5 m/min. frequency-controlled<br/>length feeding conveyor 5,223 mm<br/>length elevating conveyor 8,783 mm<br/>grade 30°<br/>effecting width 800 mm<br/>height of side wall feeding conv. 500 mm<br/>height of side wall elevating conv. 800 mm<br/>spacing / hight of carrier 800 mm / 50 mm<br/> <br/>technical data sorting belt, 1 piece <br/>manufacturer bollegraaf <br/>type hbgt 800 * 15,000 mm  10° / 0°<br/>year of construction 1999<br/>driving motor 5,5 kw<br/>belt speed 12 up to 44 m/min.  frequency-controlled<br/>length sorting conveyor 15,000 mm<br/>effecting width 800 mm<br/>height of side wall feeding conv. 500 mm<br/>height of side wall sorting conv. 150 mm<br/> <br/>technical data bunker belts, 4 pieces <br/>manufacturer bollegraaf <br/>type hbt 800 /1,000 * 10,940 mm<br/>year of construction 1999<br/>driving motor 0,22 up to 0,9 kw<br/>belt speed 1 up to 4 m/min.  frequency-controlled<br/>length bunker conveyor 10,940 mm<br/>effecting width 800 mm<br/>height of side wall feeding conv. 2,000 mm OVERVIEW TECHNICAL DATA PAPER SORTING LINE
MANUFACTURER BOLLEGRAAF
YEAR OF CONSTRUCTION 1999
THROUGHPUT RATE 3 UP TO 6 TONS/H, DEPENDING ON MATERIAL
INSTALLATION DIMENSIONS 10,000 X 19,000 X 8,000 MM (L X W X H)
SORTING CABIN 6,500 X 4,900 X 3,150 MM (L X W X H), 4 SORTING PLACES, 6 DISPOSAL CHUTES, 4 BUNKER BELTS

1 PIECE FEEDING BELT TO THE SORTING LINE HBT 600-800 * 14.006 MM ? 30°
1 PIECE SORTING BELT HBGT 800 * 15,000 MM ? 10° -0°
4 PIECES BUNKER BELTS HBT 800 /1,000 * 10,940 MM

COMMENTS: THE SORTING LINE WAS USED FOR SORTING PAPER FRACTIONS, BUT CAN ALSO BE USED FOR VARIOUS OTHER SORTING OPERATIONS. THE MACHINES ARE IN GOOD CONDITION AND CAN BE INSPECTED AT OUR WAREHOUSE. FURTHER PICTURES AND TECHNICAL DRAWINGS ARE AVAILABLE ON REQUEST.

DETAILED INFORMATION TO THE INDIVIDUAL MACHINES.
TECHNICAL DATA SORTING CABIN
MANUFACTURER BOLLEGRAAF
EQUIPMENT FEATURES 4 SORTING PLACES, 6 DISPOSAL CHUTES, 4 BUNKER BELTS
ASSEMBLY DIMENSIONS 6,500 X 4,900 X 3,150 MM (L X W X H)
ASSEMBLY AREA 72 M²
CONSTRUCTION MODULAR CONSTRUCTION WITH TWO DOORS AND TWO ROWS OF WINDOWS
WALL TYPE SEPALUX 0-70-SP
WALL THICKNESS 70 MM
MODUL WIDTH 1,200 MM

TECHNICAL DATA FEEDING CONVEYOR TO THE SORTING BELT, 1 PIECE
MANUFACTURER BOLLEGRAAF
TYPE HBT 600-800 * 14,006 MM 30°
YEAR OF CONSTRUCTION 1999
DRIVING MOTOR 1,5 KW
BELT SPEED 1,5 UP TO 5,5 M/MIN. FREQUENCY-CONTROLLED
LENGTH FEEDING CONVEYOR 5,223 MM
LENGTH ELEVATING CONVEYOR 8,783 MM
GRADE 30°
EFFECTING WIDTH 800 MM
HEIGHT OF SIDE WALL FEEDING CONV. 500 MM
HEIGHT OF SIDE WALL ELEVATING CONV. 800 MM
SPACING / HIGHT OF CARRIER 800 MM / 50 MM

TECHNICAL DATA SORTING BELT, 1 PIECE
MANUFACTURER BOLLEGRAAF
TYPE HBGT 800 * 15,000 MM 10° / 0°
YEAR OF CONSTRUCTION 1999
DRIVING MOTOR 5,5 KW
BELT SPEED 12 UP TO 44 M/MIN. FREQUENCY-CONTROLLED
LENGTH SORTING CONVEYOR 15,000 MM
EFFECTING WIDTH 800 MM
HEIGHT OF SIDE WALL FEEDING CONV. 500 MM
HEIGHT OF SIDE WALL SORTING CONV. 150 MM

TECHNICAL DATA BUNKER BELTS, 4 PIECES
MANUFACTURER BOLLEGRAAF
TYPE HBT 800 /1,000 * 10,940 MM
YEAR OF CONSTRUCTION 1999
DRIVING MOTOR 0,22 UP TO 0,9 KW
BELT SPEED 1 UP TO 4 M/MIN. FREQUENCY-CONTROLLED
LENGTH BUNKER CONVEYOR 10,940 MM
EFFECTING WIDTH 800 MM
HEIGHT OF SIDE WALL FEEDING CONV. 2,000 MM
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-heidelberg sm102vp(72 x 102cm), age c.1985, serial no.522320, circa 146 million, perfecting 2/2 or 4/0, cpc 1-02 with smart card, alcolor, baldwin refrigeration + bal control, quick action plate clamps, bacher register, superblues on transfer, grafix 3ax exactomat powder spray, steel plate in feeder, sheet decurler, palletised delivery.
 HEIDELBERG SM102VP(72 X 102CM), AGE C.1985, SERIAL NO.522320, CIRCA 146 MILLION, PERFECTING 2/2 OR 4/0, CPC 1-02 WITH SMART CARD, ALCOLOR, BALDWIN REFRIGERATION + BAL CONTROL, QUICK ACTION PLATE CLAMPS, BACHER REGISTER, SUPERBLUES ON TRANSFER, GRAFIX 3AX EXACTOMAT POWDER SPRAY, STEEL PLATE IN FEEDER, SHEET DECURLER, PALLETISED DELIVERY.
Vendedor: White Horse Machinery
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-make: arburg
type: 420s 800-675
control: selogica
year of construction: 1999
operating hours:  42239 h

note
new pump in 2017

*****clamping unit*********
closing force: 800 kn / 80 to.
distance between tie bars: 420 x 420 mm
clamping plates: 570 x 570
opening stroke: 450 mm
tool height: 250 mm min.
distance between plates max. 700 mm
ejector travel: 150 mm
ejector force: 40 kn max

*****injection unit.
screw diameter: 50 mm
injection volume: 353 ccm
injection weight: 323 gr
injection pressure: 2080 bar

****electrics******
pump: 22 kw
heating: 6 x 2,2 kw + 0,6 kw
installed capacity: 38,3kw
back-up fuse: 100 a

****general*******
 weight: 4,1 to


++++++extras+++++

- interface colouring devices

condition:
very good used condition, new pump in 2017
machine was test in full functional condition

-available now in our warehouse / hannover
- free loaded or free house against freight reimbursement
  MAKE: ARBURG TYPE: 420S 800-675 CONTROL: SELOGICA YEAR OF CONSTRUCTION: 1999 OPERATING HOURS: 42239 H NOTE NEW PUMP IN 2017 *****CLAMPING UNIT********* CLOSING FORCE: 800 KN / 80 TO. DISTANCE BETWEEN TIE BARS: 420 X 420 MM CLAMPING PLATES: 570 X 570 OPENING STROKE: 450 MM TOOL HEIGHT: 250 MM MIN. DISTANCE BETWEEN PLATES MAX. 700 MM EJECTOR TRAVEL: 150 MM EJECTOR FORCE: 40 KN MAX *****INJECTION UNIT. SCREW DIAMETER: 50 MM INJECTION VOLUME: 353 CCM INJECTION WEIGHT: 323 GR INJECTION PRESSURE: 2080 BAR ****ELECTRICS****** PUMP: 22 KW HEATING: 6 X 2,2 KW + 0,6 KW INSTALLED CAPACITY: 38,3KW BACK-UP FUSE: 100 A ****GENERAL******* WEIGHT: 4,1 TO ++++++EXTRAS+++++ - INTERFACE COLOURING DEVICES CONDITION: VERY GOOD USED CONDITION, NEW PUMP IN 2017 MACHINE WAS TEST IN FULL FUNCTIONAL CONDITION -AVAILABLE NOW IN OUR WAREHOUSE / HANNOVER - FREE LOADED OR FREE HOUSE AGAINST FREIGHT REIMBURSEMENT
Vendedor: Spritzgussmaschinen-Handel Makies GmbH
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-dear's

sale, 750 kva generator
mwm tbd 616v12
750 kva 1800 rpm 60 hz
working condition
best regards

hakan kuscu
info@kscege.com
   DEAR'S SALE, 750 KVA GENERATOR MWM TBD 616V12 750 KVA 1800 RPM 60 HZ WORKING CONDITION BEST REGARDS HAKAN KUSCU INFO@KSCEGE.COM
Vendedor: KsC Egeteknik Ltd.
Año de construcción: usado
Precio: 19.830 €
Ubicación: Land-: 1.250 x 2.500 mm<br/>: 120 mm<br/>: 12 mm<br/>: 25 mm<br/>: 4 mm<br/>: 6 mm<br/>: 1/10 unter  mm<br/>: . 470 ca l<br/>: 3.060 mm<br/>: 1.760 mm<br/>: 1.500 mm<br/>: 500 kg<br/>compressed air powered plasma source hypertherm powermax 45<br/>cnc-workbench software (external pc not included)<br/>adjustable rollers<br/>precision profile rail guide (hiwin)<br/>zero backlash htd drive belt<br/>driven by step motors<br/>solid frame construction<br/>seperate renewable support grate<br/>water trough to catch flying sparks<br/>swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height<br/>hand operation unit for comfortable processing and set up on the workpiece<br/>users manual in german<br/>complies with the ce regulations<br/><br/><br/>plamacut 2512 with alternative plasma sources:<br/><br/><br/>    hypertherm pmx<br/>65 pmx<br/>85 pmx<br/>105 pmx<br/>125   plasma type comp. air comp. air comp. air comp. air   plunge power  16 mm  20 mm  22 mm  25 mm   separating cut  32 mm  38 mm  44 mm  55 mm   recommended thickness<br/>(unalloyed steel)  6 mm  16 mm  19 mm  25 mm   max. thickness<br/>(unalloyed steel)  16 mm  20 mm  22 mm  32 mm   price<br/> ? 21.120,- ? 22.420,- ? 24.100,- ? 26.940,-   <br/><br/>(kjellberg plasma sources available on request)<br/><br/><br/>options:<br/><br/><br/>   water tank to quickly fill and drain the trough ? 2.670,-   height adjustment by arc voltage ? 2.220,-   set-up laser ? 220,-   pneumatic marking arbor ? 680,-   pneumatic engraver ? 1.700,-   suction bridge (preparation for suction Ø 160 mm,<br/>wimportant for zinc-plated- and thin sheets) ? 840,-   suction- and filter unit caremaster ifa 1,1 kw,<br/>fan power 2.500 m³/h ? 2.150,-   <br/><br/><br/><br/>working area: 1.250 x 2.500 mm<br/>height of bridge opening: 120 mm<br/>plasma source: hypertherm powermax 45<br/>plunge power: 12 mm<br/>separating cut: 25 mm<br/>recommended thickness (unalloyed steel): 4 mm<br/>max. thickness (unalloyed steel): 6 mm<br/>electrical power: 45 a 50% power-on time, 32 a 100% power-on time<br/>rapid speed: 24 m/min<br/>repeatable accuracy: under 1/10 mm<br/>max. unit mass: 500 kg/m²<br/>volume water trough: ca. 470 l<br/>length: 3.060 mm<br/>width: 1.760 mm<br/>height: 1.500 mm<br/>weight: 500 kg<br/><br/><br/><br/> : 1.250 X 2.500 MM
: 120 MM
: 12 MM
: 25 MM
: 4 MM
: 6 MM
: 1/10 UNTER MM
: . 470 CA L
: 3.060 MM
: 1.760 MM
: 1.500 MM
: 500 KG
COMPRESSED AIR POWERED PLASMA SOURCE HYPERTHERM POWERMAX 45
CNC-WORKBENCH SOFTWARE (EXTERNAL PC NOT INCLUDED)
ADJUSTABLE ROLLERS
PRECISION PROFILE RAIL GUIDE (HIWIN)
ZERO BACKLASH HTD DRIVE BELT
DRIVEN BY STEP MOTORS
SOLID FRAME CONSTRUCTION
SEPERATE RENEWABLE SUPPORT GRATE
WATER TROUGH TO CATCH FLYING SPARKS
SWIMMING BURNER BEARING IN COMBINATION WITH EXCHANGEABLE SLIDE SCREWS, ENABLES CONSTANT CUTTING HEIGHT
HAND OPERATION UNIT FOR COMFORTABLE PROCESSING AND SET UP ON THE WORKPIECE
USERS MANUAL IN GERMAN
COMPLIES WITH THE CE REGULATIONS


PLAMACUT 2512 WITH ALTERNATIVE PLASMA SOURCES:


 HYPERTHERM PMX
65 PMX
85 PMX
105 PMX
125 PLASMA TYPE COMP. AIR COMP. AIR COMP. AIR COMP. AIR PLUNGE POWER  16 MM  20 MM  22 MM  25 MM SEPARATING CUT  32 MM  38 MM  44 MM  55 MM RECOMMENDED THICKNESS
(UNALLOYED STEEL)  6 MM  16 MM  19 MM  25 MM MAX. THICKNESS
(UNALLOYED STEEL)  16 MM  20 MM  22 MM  32 MM PRICE
? 21.120,- ? 22.420,- ? 24.100,- ? 26.940,-

(KJELLBERG PLASMA SOURCES AVAILABLE ON REQUEST)


OPTIONS:


WATER TANK TO QUICKLY FILL AND DRAIN THE TROUGH ? 2.670,- HEIGHT ADJUSTMENT BY ARC VOLTAGE ? 2.220,- SET-UP LASER ? 220,- PNEUMATIC MARKING ARBOR ? 680,- PNEUMATIC ENGRAVER ? 1.700,- SUCTION BRIDGE (PREPARATION FOR SUCTION Ø 160 MM,
WIMPORTANT FOR ZINC-PLATED- AND THIN SHEETS) ? 840,- SUCTION- AND FILTER UNIT CAREMASTER IFA 1,1 KW,
FAN POWER 2.500 M³/H ? 2.150,-



WORKING AREA: 1.250 X 2.500 MM
HEIGHT OF BRIDGE OPENING: 120 MM
PLASMA SOURCE: HYPERTHERM POWERMAX 45
PLUNGE POWER: 12 MM
SEPARATING CUT: 25 MM
RECOMMENDED THICKNESS (UNALLOYED STEEL): 4 MM
MAX. THICKNESS (UNALLOYED STEEL): 6 MM
ELECTRICAL POWER: 45 A 50% POWER-ON TIME, 32 A 100% POWER-ON TIME
RAPID SPEED: 24 M/MIN
REPEATABLE ACCURACY: UNDER 1/10 MM
MAX. UNIT MASS: 500 KG/M²
VOLUME WATER TROUGH: CA. 470 L
LENGTH: 3.060 MM
WIDTH: 1.760 MM
HEIGHT: 1.500 MM
WEIGHT: 500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-including inkjet printer and shrinking tunnel beck.  INCLUDING INKJET PRINTER AND SHRINKING TUNNEL BECK.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 22.350 €
Ubicación: Land-: 1.500 x 3.000 mm<br/>: 120 mm<br/>: 12 mm<br/>: 25 mm<br/>: 4 mm<br/>: 6 mm<br/>: 1/10 unter  mm<br/>: . 630 ca l<br/>: 3.560 mm<br/>: 1.960 mm<br/>: 1.500 mm<br/>: 650 kg<br/>compressed air powered plasma source hypertherm powermax 45<br/>cnc-workbench software (external pc not included)<br/>adjustable rollers<br/>precision profile rail guide (hiwin)<br/>zero backlash htd drive belt<br/>driven by step motors<br/>solid frame construction<br/>seperate renewable support grate<br/>water trough to catch flying sparks<br/>swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height<br/>hand operation unit for comfortable processing and set up on the workpiece<br/>users manual in german<br/>complies with the ce regulations<br/><br/><br/>plamacut 3015 with alternative plasma sources:<br/><br/><br/>    hypertherm pmx<br/>65 pmx<br/>85 pmx<br/>105 pmx<br/>125 maxpro<br/>200*   plasma type comp. air comp. air comp. air comp. air oxygen   plunge power  16 mm  20 mm  22 mm  25 mm  32 mm   separating cut  32 mm  38 mm  44 mm  55 mm  75 mm   recommended thickness<br/>(unalloyed steel)  6 mm  16 mm  19 mm  25 mm  32 mm   max. thickness<br/>(unalloyed steel)  16 mm  20 mm  22 mm  32 mm  50 mm   price<br/> ? 23.640,- ? 24.950,- ? 26.530,- ? 29.460,- ? 41.930,-   <br/><br/>*plasma gas oxygen, additionally shield gas (air, nitrogen)<br/><br/>(kjellberg plasma sources available on request)<br/><br/><br/>options:<br/><br/><br/>   water tank to quickly fill and drain the trough ? 2.980,-   height adjustment by arc voltage ? 2.220,-   set-up laser ? 220,-   pneumatic marking arbor ? 680,-   pneumatic engraver ? 1.700,-   suction bridge (preparation for suction Ø 160 mm,<br/>wimportant for zinc-plated- and thin sheets) ? 840,-   suction- and filter unit caremaster ifa 1,1 kw,<br/>fan power 2.500 m³/h ? 2.150,-   <br/><br/><br/><br/>working area: 1.500 x 3.000 mm<br/>height of bridge opening: 120 mm<br/>plasma source: hypertherm powermax 45<br/>plunge power: 12 mm<br/>separating cut: 25 mm<br/>recommended thickness (unalloyed steel): 4 mm<br/>max. thickness (unalloyed steel): 6 mm<br/>electrical power: 45 a 50% power-on time, 32 a 100% power-on time<br/>rapid speed: 24 m/min<br/>repeatable accuracy: under 1/10 mm<br/>max. unit mass: 400 kg/m²<br/>volume water trough: ca. 630 l<br/>length: 3.560 mm<br/>width: 1.960 mm<br/>height: 1.500 mm<br/>weight: 650 kg<br/><br/><br/><br/> : 1.500 X 3.000 MM
: 120 MM
: 12 MM
: 25 MM
: 4 MM
: 6 MM
: 1/10 UNTER MM
: . 630 CA L
: 3.560 MM
: 1.960 MM
: 1.500 MM
: 650 KG
COMPRESSED AIR POWERED PLASMA SOURCE HYPERTHERM POWERMAX 45
CNC-WORKBENCH SOFTWARE (EXTERNAL PC NOT INCLUDED)
ADJUSTABLE ROLLERS
PRECISION PROFILE RAIL GUIDE (HIWIN)
ZERO BACKLASH HTD DRIVE BELT
DRIVEN BY STEP MOTORS
SOLID FRAME CONSTRUCTION
SEPERATE RENEWABLE SUPPORT GRATE
WATER TROUGH TO CATCH FLYING SPARKS
SWIMMING BURNER BEARING IN COMBINATION WITH EXCHANGEABLE SLIDE SCREWS, ENABLES CONSTANT CUTTING HEIGHT
HAND OPERATION UNIT FOR COMFORTABLE PROCESSING AND SET UP ON THE WORKPIECE
USERS MANUAL IN GERMAN
COMPLIES WITH THE CE REGULATIONS


PLAMACUT 3015 WITH ALTERNATIVE PLASMA SOURCES:


 HYPERTHERM PMX
65 PMX
85 PMX
105 PMX
125 MAXPRO
200* PLASMA TYPE COMP. AIR COMP. AIR COMP. AIR COMP. AIR OXYGEN PLUNGE POWER  16 MM  20 MM  22 MM  25 MM  32 MM SEPARATING CUT  32 MM  38 MM  44 MM  55 MM  75 MM RECOMMENDED THICKNESS
(UNALLOYED STEEL)  6 MM  16 MM  19 MM  25 MM  32 MM MAX. THICKNESS
(UNALLOYED STEEL)  16 MM  20 MM  22 MM  32 MM  50 MM PRICE
? 23.640,- ? 24.950,- ? 26.530,- ? 29.460,- ? 41.930,-

*PLASMA GAS OXYGEN, ADDITIONALLY SHIELD GAS (AIR, NITROGEN)

(KJELLBERG PLASMA SOURCES AVAILABLE ON REQUEST)


OPTIONS:


WATER TANK TO QUICKLY FILL AND DRAIN THE TROUGH ? 2.980,- HEIGHT ADJUSTMENT BY ARC VOLTAGE ? 2.220,- SET-UP LASER ? 220,- PNEUMATIC MARKING ARBOR ? 680,- PNEUMATIC ENGRAVER ? 1.700,- SUCTION BRIDGE (PREPARATION FOR SUCTION Ø 160 MM,
WIMPORTANT FOR ZINC-PLATED- AND THIN SHEETS) ? 840,- SUCTION- AND FILTER UNIT CAREMASTER IFA 1,1 KW,
FAN POWER 2.500 M³/H ? 2.150,-



WORKING AREA: 1.500 X 3.000 MM
HEIGHT OF BRIDGE OPENING: 120 MM
PLASMA SOURCE: HYPERTHERM POWERMAX 45
PLUNGE POWER: 12 MM
SEPARATING CUT: 25 MM
RECOMMENDED THICKNESS (UNALLOYED STEEL): 4 MM
MAX. THICKNESS (UNALLOYED STEEL): 6 MM
ELECTRICAL POWER: 45 A 50% POWER-ON TIME, 32 A 100% POWER-ON TIME
RAPID SPEED: 24 M/MIN
REPEATABLE ACCURACY: UNDER 1/10 MM
MAX. UNIT MASS: 400 KG/M²
VOLUME WATER TROUGH: CA. 630 L
LENGTH: 3.560 MM
WIDTH: 1.960 MM
HEIGHT: 1.500 MM
WEIGHT: 650 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-in good technical condition.
production in 2003.
control: fanuc 21i-t.
maximum turning diameter: 430 mm.
current diameter: 680 mm.
machine dimensions: 3300 x 2230 x 2330 mm.
machine weight: 7500 kg. IN GOOD TECHNICAL CONDITION. PRODUCTION IN 2003. CONTROL: FANUC 21I-T. MAXIMUM TURNING DIAMETER: 430 MM. CURRENT DIAMETER: 680 MM. MACHINE DIMENSIONS: 3300 X 2230 X 2330 MM. MACHINE WEIGHT: 7500 KG.
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Precio: used machinery auction RESALE 900 €
Ubicación: Land-weight approx.: ca. 2500 kg<br/>dimensions (l x w x h) approx.: 4800 x 1700 x 1600 mm<br/>description: wenig pm 22 four-side plane<br> machine number: 240-496<br> approx. planing width 230 mm, approx. planing height 120 mm WEIGHT APPROX.: CA. 2500 KG
DIMENSIONS (L X W X H) APPROX.: 4800 X 1700 X 1600 MM
DESCRIPTION: WENIG PM 22 FOUR-SIDE PLANE
MACHINE NUMBER: 240-496
APPROX. PLANING WIDTH 230 MM, APPROX. PLANING HEIGHT 120 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-output: 25 cases/min, case dimensions: 200-500x150-350x150-600mm, length: 2140mm, width: 2230mm, height: 1600mm, weight: 525kg.  OUTPUT: 25 CASES/MIN, CASE DIMENSIONS: 200-500X150-350X150-600MM, LENGTH: 2140MM, WIDTH: 2230MM, HEIGHT: 1600MM, WEIGHT: 525KG.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-:kth 500 <br/>turning diameter:1010 mm<br/>turning length:2000/3000/4000/5000 mm<br/>control:siemens/fanuc/fagor <br/>max. swing over slide:718 mm<br/>bed width:500 mm<br/>spindle taper:a2-11 <br/>spindle speeds:0-1400 1/min.<br/>spindle bore:130 mm<br/>transmission ratio:2 <br/>feed range:0-7000 mm/min<br/>rapid traverse x/z:10/10 m/min<br/>tailstock quill diameter:120 mm<br/>tailstock quill stroke:300 mm<br/>taper of tailstock quill:6 mk<br/>power requirement:22 kw<br/>weight of the machine ca.:7600 kg<br/>dimensions of the machine ca.:6325x1800x2230 mm<br/>automatic tool changer:8-fach <br/>cnc controller:siemens 828d <br/>ce-design: <br/>servo spindle motor: <br/>hydraulic unit: <br/>machine work light: <br/>coolant system: <br/>european electric: <br/>automatic lubrication system: <br/>electric handwheel: <br/>machine semi-cover: <br/>: <br/>tools:1 satz <br/>c-axis: <br/>cnc controls from:siemens/fanuc/fagor <br/>y-axis: <br/>chip conveyor and trolley: <br/>hydr. chuck and tailstock sleeve: <br/>different chucks and faceplates: <br/>steady rests: <br/><br/>new cnc lathe kraft st 500/3000 with fanuc oi td  made in europe  for more information please see the attached documents :KTH 500
TURNING DIAMETER:1010 MM
TURNING LENGTH:2000/3000/4000/5000 MM
CONTROL:SIEMENS/FANUC/FAGOR
MAX. SWING OVER SLIDE:718 MM
BED WIDTH:500 MM
SPINDLE TAPER:A2-11
SPINDLE SPEEDS:0-1400 1/MIN.
SPINDLE BORE:130 MM
TRANSMISSION RATIO:2
FEED RANGE:0-7000 MM/MIN
RAPID TRAVERSE X/Z:10/10 M/MIN
TAILSTOCK QUILL DIAMETER:120 MM
TAILSTOCK QUILL STROKE:300 MM
TAPER OF TAILSTOCK QUILL:6 MK
POWER REQUIREMENT:22 KW
WEIGHT OF THE MACHINE CA.:7600 KG
DIMENSIONS OF THE MACHINE CA.:6325X1800X2230 MM
AUTOMATIC TOOL CHANGER:8-FACH
CNC CONTROLLER:SIEMENS 828D
CE-DESIGN:
SERVO SPINDLE MOTOR:
HYDRAULIC UNIT:
MACHINE WORK LIGHT:
COOLANT SYSTEM:
EUROPEAN ELECTRIC:
AUTOMATIC LUBRICATION SYSTEM:
ELECTRIC HANDWHEEL:
MACHINE SEMI-COVER:
:
TOOLS:1 SATZ
C-AXIS:
CNC CONTROLS FROM:SIEMENS/FANUC/FAGOR
Y-AXIS:
CHIP CONVEYOR AND TROLLEY:
HYDR. CHUCK AND TAILSTOCK SLEEVE:
DIFFERENT CHUCKS AND FACEPLATES:
STEADY RESTS:

NEW CNC LATHE KRAFT ST 500/3000 WITH FANUC OI TD MADE IN EUROPE FOR MORE INFORMATION PLEASE SEE THE ATTACHED DOCUMENTS
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 1.200 €
Ubicación: Land-manufacturer: mkn
model: b) u d) c 0223022/00 u) 0221101/01

consisting of:
a) sub table 1300x600x530mm, 250,-euro.
b) + d) 2 electric burners 㢠2 plates, 400x700x300mm, 4. 0kw, per piece 350,-euro.
c) griddle / electric surface of roast / roasting pan, 500x700x300mm, 7.5kw, 800,-euro

dimensions: 1300x700x850mm, elek. voltage: 380v, elek. power: 15.5kw.

the mismatch? 
we resolve our camp and have very many, cheap deals for devices from the fields of gastro, restaurant and canteen kitchens, just make a request. MANUFACTURER: MKN MODEL: B) U D) C 0223022/00 U) 0221101/01 CONSISTING OF: A) SUB TABLE 1300X600X530MM, 250,-EURO. B) + D) 2 ELECTRIC BURNERS &ATILDE;&CENT; 2 PLATES, 400X700X300MM, 4. 0KW, PER PIECE 350,-EURO. C) GRIDDLE / ELECTRIC SURFACE OF ROAST / ROASTING PAN, 500X700X300MM, 7.5KW, 800,-EURO DIMENSIONS: 1300X700X850MM, ELEK. VOLTAGE: 380V, ELEK. POWER: 15.5KW. THE MISMATCH? WE RESOLVE OUR CAMP AND HAVE VERY MANY, CHEAP DEALS FOR DEVICES FROM THE FIELDS OF GASTRO, RESTAURANT AND CANTEEN KITCHENS, JUST MAKE A REQUEST.
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Ubicación: Land-turning diameter:1010 mm<br/>turning length:3000 mm<br/>control:fanuc 0itf <br/>max. swing over slide:718 mm<br/>bed width:500 mm<br/>spindle taper:a2-11 <br/>spindle speeds:0-1400 1/min.<br/>spindle bore:130 mm<br/>transmission ratio:2 <br/>tailstock quill diameter:120 mm<br/>tailstock quill stroke:300 mm<br/>taper of tailstock quill:6 mk<br/>max. length of work piece:5000 mm<br/>rapid traverse x/z:10/10 m/min<br/>power requirement:22 kw<br/>weight of the machine ca.:10.000 kg<br/>dimensions of the machine ca.:5325x1800x2230 mm<br/>hydr. tailstock quill movement: <br/>automatic tool changer:12-fach <br/>c-axis: <br/>y-axis:über werkzeugrevolver y tbyr250-12 bmt75  mm<br/>3-jaw hydraulic chuck:500 mm<br/>cnc controller:fanuc 0itf <br/>ce-design: <br/>tools:1 satz <br/>chip conveyor with chip bucket: <br/>hydraulic unit: <br/>machine work light: <br/>coolant system: <br/>european electric: <br/>automatic lubrication system: <br/>electric handwheel: <br/>servo spindle motor: <br/>machine semi-cover: <br/>: <br/>fixed steady:option mm<br/><br/>new cnc lathe kraft st 500/5000 with fanuc oi td  made in europe  for more information please see the attached documents TURNING DIAMETER:1010 MM
TURNING LENGTH:3000 MM
CONTROL:FANUC 0ITF
MAX. SWING OVER SLIDE:718 MM
BED WIDTH:500 MM
SPINDLE TAPER:A2-11
SPINDLE SPEEDS:0-1400 1/MIN.
SPINDLE BORE:130 MM
TRANSMISSION RATIO:2
TAILSTOCK QUILL DIAMETER:120 MM
TAILSTOCK QUILL STROKE:300 MM
TAPER OF TAILSTOCK QUILL:6 MK
MAX. LENGTH OF WORK PIECE:5000 MM
RAPID TRAVERSE X/Z:10/10 M/MIN
POWER REQUIREMENT:22 KW
WEIGHT OF THE MACHINE CA.:10.000 KG
DIMENSIONS OF THE MACHINE CA.:5325X1800X2230 MM
HYDR. TAILSTOCK QUILL MOVEMENT:
AUTOMATIC TOOL CHANGER:12-FACH
C-AXIS:
Y-AXIS:üBER WERKZEUGREVOLVER Y TBYR250-12 BMT75 MM
3-JAW HYDRAULIC CHUCK:500 MM
CNC CONTROLLER:FANUC 0ITF
CE-DESIGN:
TOOLS:1 SATZ
CHIP CONVEYOR WITH CHIP BUCKET:
HYDRAULIC UNIT:
MACHINE WORK LIGHT:
COOLANT SYSTEM:
EUROPEAN ELECTRIC:
AUTOMATIC LUBRICATION SYSTEM:
ELECTRIC HANDWHEEL:
SERVO SPINDLE MOTOR:
MACHINE SEMI-COVER:
:
FIXED STEADY:OPTION MM

NEW CNC LATHE KRAFT ST 500/5000 WITH FANUC OI TD MADE IN EUROPE FOR MORE INFORMATION PLEASE SEE THE ATTACHED DOCUMENTS
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-calibrating sanding machine viet mod. si 223 2620 r krt

working width mm. 1350

composition:

i° belt steel calibrating roller d. 190 mm.

ii° belt roller + pad – roller d. 190 mm. 60 sh

automatic pneumatic pad

inverter for adjusting belt feed speed

power feed motor kw 1,5

power motor i° belt kw 11

power motor i° belt kw 11

power motor ii° belt kw 11

worktable with vacuum hold-down system

working height mm. 3-160

min. workable lenght pieces mm. 250

dimensions belt mm. 1380 x 2620

weighr kg. 2760

dimensions mm. 2030 x 2314 x h. 2415

year of production 2007

ce CALIBRATING SANDING MACHINE VIET MOD. SI 223 2620 R KRT WORKING WIDTH MM. 1350 COMPOSITION: I° BELT STEEL CALIBRATING ROLLER D. 190 MM. II° BELT ROLLER + PAD – ROLLER D. 190 MM. 60 SH AUTOMATIC PNEUMATIC PAD INVERTER FOR ADJUSTING BELT FEED SPEED POWER FEED MOTOR KW 1,5 POWER MOTOR I° BELT KW 11 POWER MOTOR I° BELT KW 11 POWER MOTOR II° BELT KW 11 WORKTABLE WITH VACUUM HOLD-DOWN SYSTEM WORKING HEIGHT MM. 3-160 MIN. WORKABLE LENGHT PIECES MM. 250 DIMENSIONS BELT MM. 1380 X 2620 WEIGHR KG. 2760 DIMENSIONS MM. 2030 X 2314 X H. 2415 YEAR OF PRODUCTION 2007 CE
Vendedor: VERGA ERCOLE di Roberto Verga & C. S.A.S
Año de construcción: usado
Ubicación: Land-internal diameter:315 mm<br/>grinding depth:500 mm<br/>swing diameter:500/600 mm<br/>max. bore diameter to be ground:315 mm<br/>smallest grindable bore dia.:30 mm<br/>grinding depth max.:500 mm<br/>stroke of the table:800 mm<br/>centre height:315 mm<br/>max. distance bet work spindle to grinding stock:1350 mm<br/>swivel range of workhead:30 °<br/>hole through spindle:42 mm<br/>workpiece spindle stepless:50-450 u/min<br/>metric taper of workspindle:60 °<br/>corss traverse of workhead:190 mm<br/>max. mass of work-piece ground in centres:320 kg<br/>table speed -stepless-:0,5-8 m/min<br/>connected load:10,5 kw<br/>net weight:5100 kg<br/>gross weight:5900 kg<br/>dimensions (l/w/h):3800/1740/2230 mm<br/>3-jaw chuck:315 mm<br/>internal grinding spindle:100 mm<br/>coolant system: <br/>face grinding attachement: <br/>metric, 380v, 50hz, 3-phases: <br/><br/>100 % before loading  warranty: none  one used internal grinding machine with face grinding attachment, make wmw glauchau, germany, type sip 315 x 500, year of production 1960, serial number 5299 INTERNAL DIAMETER:315 MM
GRINDING DEPTH:500 MM
SWING DIAMETER:500/600 MM
MAX. BORE DIAMETER TO BE GROUND:315 MM
SMALLEST GRINDABLE BORE DIA.:30 MM
GRINDING DEPTH MAX.:500 MM
STROKE OF THE TABLE:800 MM
CENTRE HEIGHT:315 MM
MAX. DISTANCE BET WORK SPINDLE TO GRINDING STOCK:1350 MM
SWIVEL RANGE OF WORKHEAD:30 °
HOLE THROUGH SPINDLE:42 MM
WORKPIECE SPINDLE STEPLESS:50-450 U/MIN
METRIC TAPER OF WORKSPINDLE:60 °
CORSS TRAVERSE OF WORKHEAD:190 MM
MAX. MASS OF WORK-PIECE GROUND IN CENTRES:320 KG
TABLE SPEED -STEPLESS-:0,5-8 M/MIN
CONNECTED LOAD:10,5 KW
NET WEIGHT:5100 KG
GROSS WEIGHT:5900 KG
DIMENSIONS (L/W/H):3800/1740/2230 MM
3-JAW CHUCK:315 MM
INTERNAL GRINDING SPINDLE:100 MM
COOLANT SYSTEM:
FACE GRINDING ATTACHEMENT:
METRIC, 380V, 50HZ, 3-PHASES:

100 % BEFORE LOADING WARRANTY: NONE ONE USED INTERNAL GRINDING MACHINE WITH FACE GRINDING ATTACHMENT, MAKE WMW GLAUCHAU, GERMANY, TYPE SIP 315 X 500, YEAR OF PRODUCTION 1960, SERIAL NUMBER 5299
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-description:
well received
2-axis digital display
identical vdf hanseat 350

technical data

tip height 180 mm
top width 1000 mm
circulating bed 350 mm
circulation over slide 200 mm
spindle bore 38 mm
14 spindle speeds 28-2500 rpm
feeds along 0.04-4 mm / rev.
feed plan 0.02-2 mm / rev.
thread metric 0.2 - 18 mm / rev,
inch 76-2 inch / u.
module 0.4 13.5 module
dp thread 38-2 2/3 dp
dimensions (lxwxh) 2470 x 900 x 1600 mm
weight 1700 kg
power 3 kw
+ accessories:
2-axis digital display from sony
3-jaw chuck forkardt f 200, diameter 200 mm
1 set hard block jaws, 1 set of hard base jaws with soft top jaws
quick change toolpost system multi fix gr. b with 4 holders

DESCRIPTION: WELL RECEIVED 2-AXIS DIGITAL DISPLAY IDENTICAL VDF HANSEAT 350 TECHNICAL DATA TIP HEIGHT 180 MM TOP WIDTH 1000 MM CIRCULATING BED 350 MM CIRCULATION OVER SLIDE 200 MM SPINDLE BORE 38 MM 14 SPINDLE SPEEDS 28-2500 RPM FEEDS ALONG 0.04-4 MM / REV. FEED PLAN 0.02-2 MM / REV. THREAD METRIC 0.2 - 18 MM / REV, INCH 76-2 INCH / U. MODULE 0.4 13.5 MODULE DP THREAD 38-2 2/3 DP DIMENSIONS (LXWXH) 2470 X 900 X 1600 MM WEIGHT 1700 KG POWER 3 KW + ACCESSORIES: 2-AXIS DIGITAL DISPLAY FROM SONY 3-JAW CHUCK FORKARDT F 200, DIAMETER 200 MM 1 SET HARD BLOCK JAWS, 1 SET OF HARD BASE JAWS WITH SOFT TOP JAWS QUICK CHANGE TOOLPOST SYSTEM MULTI FIX GR. B WITH 4 HOLDERS
Vendedor: Oeben Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-turning diameter:805 mm<br/>turning length:2000 mm<br/>control:fanuc oi td <br/>max. swing over slide:515 mm<br/>bed width:425 mm<br/>spindle taper:a2-8 <br/>spindle speeds:0-1700 1/min.<br/>spindle bore:155 mm<br/>transmission ratio:2 <br/>tailstock quill diameter:106 mm<br/>tailstock quill stroke:215 mm<br/>taper of tailstock quill:6 mk<br/>max. length of work piece:2000 mm<br/>rapid traverse x/z:10/10 m/min<br/>power requirement:17 kw<br/>weight of the machine ca.:6460 kg<br/>dimensions of the machine ca.:4630x1800x2230 mm<br/>automatic tool changer:12-fach (dupolomatic hyd.), vdi 40 <br/>cnc controller:fanuc oi td <br/>3-jaw hydraulic chuck:500 mm<br/>hydr. tailstock quill movement: <br/>tools:1 satz <br/>hydraulic unit: <br/>machine work light: <br/>coolant system: <br/>european electric: <br/>automatic lubrication system: <br/>electric handwheel: <br/>servo spindle motor: <br/>machine semi-cover: <br/>: <br/>hydraulic unit: <br/>ce-design: <br/><br/>new cnc lathe kraft st 400/2000 with fanuc oi td  made in europe  for more information please see the attached documents TURNING DIAMETER:805 MM
TURNING LENGTH:2000 MM
CONTROL:FANUC OI TD
MAX. SWING OVER SLIDE:515 MM
BED WIDTH:425 MM
SPINDLE TAPER:A2-8
SPINDLE SPEEDS:0-1700 1/MIN.
SPINDLE BORE:155 MM
TRANSMISSION RATIO:2
TAILSTOCK QUILL DIAMETER:106 MM
TAILSTOCK QUILL STROKE:215 MM
TAPER OF TAILSTOCK QUILL:6 MK
MAX. LENGTH OF WORK PIECE:2000 MM
RAPID TRAVERSE X/Z:10/10 M/MIN
POWER REQUIREMENT:17 KW
WEIGHT OF THE MACHINE CA.:6460 KG
DIMENSIONS OF THE MACHINE CA.:4630X1800X2230 MM
AUTOMATIC TOOL CHANGER:12-FACH (DUPOLOMATIC HYD.), VDI 40
CNC CONTROLLER:FANUC OI TD
3-JAW HYDRAULIC CHUCK:500 MM
HYDR. TAILSTOCK QUILL MOVEMENT:
TOOLS:1 SATZ
HYDRAULIC UNIT:
MACHINE WORK LIGHT:
COOLANT SYSTEM:
EUROPEAN ELECTRIC:
AUTOMATIC LUBRICATION SYSTEM:
ELECTRIC HANDWHEEL:
SERVO SPINDLE MOTOR:
MACHINE SEMI-COVER:
:
HYDRAULIC UNIT:
CE-DESIGN:

NEW CNC LATHE KRAFT ST 400/2000 WITH FANUC OI TD MADE IN EUROPE FOR MORE INFORMATION PLEASE SEE THE ATTACHED DOCUMENTS
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-built in 1992 
control: cc 90
clamping force: 500 to.
shot volume: max 2481 cc 
shot weight (ps): 2233 g
screw diameter: 90 mm 
injection pressure: 1500 bar / 1770 bar 
tie bar distance: 915 x 860 mm 
opening distance: 850 mm 
mould height: min. 310 mm 

good condition, further details on request! BUILT IN 1992 CONTROL: CC 90 CLAMPING FORCE: 500 TO. SHOT VOLUME: MAX 2481 CC SHOT WEIGHT (PS): 2233 G SCREW DIAMETER: 90 MM INJECTION PRESSURE: 1500 BAR / 1770 BAR TIE BAR DISTANCE: 915 X 860 MM OPENING DISTANCE: 850 MM MOULD HEIGHT: MIN. 310 MM GOOD CONDITION, FURTHER DETAILS ON REQUEST!
Vendedor: Maschinenhandel Kmet
Año de construcción: usado
Ubicación: Land-turning diameter:805 mm<br/>turning length:3000 mm<br/>control:fanuc 0i tf <br/>max. swing over slide:515 mm<br/>bed width:425 mm<br/>spindle taper:a2-8 <br/>spindle speeds:0-1700 1/min.<br/>spindle bore:105 mm<br/>transmission ratio:2 <br/>tailstock quill diameter:106 mm<br/>tailstock quill stroke:215 mm<br/>taper of tailstock quill:6 mk<br/>max. length of work piece:3000 mm<br/>rapid traverse x/z:10/10 m/min<br/>power requirement:17 kw<br/>weight of the machine ca.:7560 kg<br/>dimensions of the machine ca.:5530x1800x2230 mm<br/>automatic tool changer:8-fach <br/>european electric: <br/>cnc controller:fanuc 0i tf <br/>ce-design: <br/>tools:1 satz <br/>machine work light: <br/>coolant system: <br/>automatic lubrication system: <br/>electric handwheel: <br/>servo spindle motor: <br/>machine semi-cover: <br/>: <br/>3 chip conveyor: <br/><br/>new cnc lathe kraft st 400/3000 with fanuc oi mate td  made in europe  for more information please see the attached documents TURNING DIAMETER:805 MM
TURNING LENGTH:3000 MM
CONTROL:FANUC 0I TF
MAX. SWING OVER SLIDE:515 MM
BED WIDTH:425 MM
SPINDLE TAPER:A2-8
SPINDLE SPEEDS:0-1700 1/MIN.
SPINDLE BORE:105 MM
TRANSMISSION RATIO:2
TAILSTOCK QUILL DIAMETER:106 MM
TAILSTOCK QUILL STROKE:215 MM
TAPER OF TAILSTOCK QUILL:6 MK
MAX. LENGTH OF WORK PIECE:3000 MM
RAPID TRAVERSE X/Z:10/10 M/MIN
POWER REQUIREMENT:17 KW
WEIGHT OF THE MACHINE CA.:7560 KG
DIMENSIONS OF THE MACHINE CA.:5530X1800X2230 MM
AUTOMATIC TOOL CHANGER:8-FACH
EUROPEAN ELECTRIC:
CNC CONTROLLER:FANUC 0I TF
CE-DESIGN:
TOOLS:1 SATZ
MACHINE WORK LIGHT:
COOLANT SYSTEM:
AUTOMATIC LUBRICATION SYSTEM:
ELECTRIC HANDWHEEL:
SERVO SPINDLE MOTOR:
MACHINE SEMI-COVER:
:
3 CHIP CONVEYOR:

NEW CNC LATHE KRAFT ST 400/3000 WITH FANUC OI MATE TD MADE IN EUROPE FOR MORE INFORMATION PLEASE SEE THE ATTACHED DOCUMENTS
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-prima power press brake mod p 2230 / bj. 2013 / 3000 x 220 t / 5 axes / hb 200 / max. dimensions of tools 3050 mm / kw 15 / 110 mm sec. / hour: 13,000 / top tool clamping / full accessories: willa tool set - top tool section - etc. / good condition fe.gi.maschinen.sbg.at

prima power press brake mod p 2230 / year 2013 / 3000 x 220 t / 5 axes / stroke 200 / max. dimensions of the tools 3050 mm / kw 15 / 110 mm sec. / hours: 13,000 / upper tool clamping / full accessories: willa toolset - upper tool profiles - etc... / good condition fe.gi.maschinen.sbg.at
 PRIMA POWER PRESS BRAKE MOD P 2230 / BJ. 2013 / 3000 X 220 T / 5 AXES / HB 200 / MAX. DIMENSIONS OF TOOLS 3050 MM / KW 15 / 110 MM SEC. / HOUR: 13,000 / TOP TOOL CLAMPING / FULL ACCESSORIES: WILLA TOOL SET - TOP TOOL SECTION - ETC. / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT PRIMA POWER PRESS BRAKE MOD P 2230 / YEAR 2013 / 3000 X 220 T / 5 AXES / STROKE 200 / MAX. DIMENSIONS OF THE TOOLS 3050 MM / KW 15 / 110 MM SEC. / HOURS: 13,000 / UPPER TOOL CLAMPING / FULL ACCESSORIES: WILLA TOOLSET - UPPER TOOL PROFILES - ETC... / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools
Año de construcción: usado
Ubicación: Land-:kth 400 <br/>turning diameter:805 mm<br/>turning length:1000/2000/3000/4000/5000 mm<br/>control:siemens/fanuc/fagor <br/>max. swing over slide:515 mm<br/>bed width:425 mm<br/>spindle taper:a2-8 (opt. a2-11) <br/>spindle speeds:0-1700 1/min.<br/>spindle bore:105 (opt. 155/230) mm<br/>transmission ratio:2 <br/>feed range:0-7000 mm/min<br/>rapid traverse x/z:10/10 m/min<br/>tailstock quill diameter:106 mm<br/>tailstock quill stroke:215 mm<br/>taper of tailstock quill:6 mk<br/>power requirement:17 kw<br/>weight of the machine ca.:5460/5760/6460/7560/9060  kg<br/>dimensions of the machine ca.:3557/4557/5557/6557/7557 x1800 x 2230 mm<br/>automatic tool changer:8-fach <br/>cnc controller:siemens 828d <br/>ce-design: <br/>servo spindle motor: <br/>hydraulic unit: <br/>machine work light: <br/>coolant system: <br/>european electric: <br/>automatic lubrication system: <br/>electric handwheel: <br/>machine semi-cover: <br/>: <br/>tools:1 satz <br/>c-axis: <br/>y-axis: <br/>different chucks and faceplates: <br/>chip conveyor and trolley: <br/>hydr. tailstock quill: <br/>hydr. chuck: <br/>cnc controls from:siemens/fanuc/fagor <br/>steady rests: <br/><br/>new cnc lathe kraft st 500/3000 with fanuc oi td  made in europe  for more information please see the attached documents :KTH 400
TURNING DIAMETER:805 MM
TURNING LENGTH:1000/2000/3000/4000/5000 MM
CONTROL:SIEMENS/FANUC/FAGOR
MAX. SWING OVER SLIDE:515 MM
BED WIDTH:425 MM
SPINDLE TAPER:A2-8 (OPT. A2-11)
SPINDLE SPEEDS:0-1700 1/MIN.
SPINDLE BORE:105 (OPT. 155/230) MM
TRANSMISSION RATIO:2
FEED RANGE:0-7000 MM/MIN
RAPID TRAVERSE X/Z:10/10 M/MIN
TAILSTOCK QUILL DIAMETER:106 MM
TAILSTOCK QUILL STROKE:215 MM
TAPER OF TAILSTOCK QUILL:6 MK
POWER REQUIREMENT:17 KW
WEIGHT OF THE MACHINE CA.:5460/5760/6460/7560/9060 KG
DIMENSIONS OF THE MACHINE CA.:3557/4557/5557/6557/7557 X1800 X 2230 MM
AUTOMATIC TOOL CHANGER:8-FACH
CNC CONTROLLER:SIEMENS 828D
CE-DESIGN:
SERVO SPINDLE MOTOR:
HYDRAULIC UNIT:
MACHINE WORK LIGHT:
COOLANT SYSTEM:
EUROPEAN ELECTRIC:
AUTOMATIC LUBRICATION SYSTEM:
ELECTRIC HANDWHEEL:
MACHINE SEMI-COVER:
:
TOOLS:1 SATZ
C-AXIS:
Y-AXIS:
DIFFERENT CHUCKS AND FACEPLATES:
CHIP CONVEYOR AND TROLLEY:
HYDR. TAILSTOCK QUILL:
HYDR. CHUCK:
CNC CONTROLS FROM:SIEMENS/FANUC/FAGOR
STEADY RESTS:

NEW CNC LATHE KRAFT ST 500/3000 WITH FANUC OI TD MADE IN EUROPE FOR MORE INFORMATION PLEASE SEE THE ATTACHED DOCUMENTS
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-designed for high-precision specifications, series for laser applications or the gauging of components are robots from the ha. 

loads:
load 60/45/30 kg supplementary load 35 kg workspace:
max reach 2033/2230/2429 mm number of axes 6 repeatability < â±0, 05 mm weight 665 kg mounting positions floor, ceiling equipment list and photos here DESIGNED FOR HIGH-PRECISION SPECIFICATIONS, SERIES FOR LASER APPLICATIONS OR THE GAUGING OF COMPONENTS ARE ROBOTS FROM THE HA. LOADS: LOAD 60/45/30 KG SUPPLEMENTARY LOAD 35 KG WORKSPACE: MAX REACH 2033/2230/2429 MM NUMBER OF AXES 6 REPEATABILITY < &ACIRC;&PLUSMN;0, 05 MM WEIGHT 665 KG MOUNTING POSITIONS FLOOR, CEILING EQUIPMENT LIST AND PHOTOS HERE
Vendedor: 3W Handelsgesellschaft m.b.H
Año de construcción: usado
Ubicación: Land-spindle passage:155 mm<br/>turning diameter over bed:805 mm<br/>turning diameter over slide:515 mm<br/>turning length:3000 mm<br/>control:fagor 8055 <br/>max. swing over slide:515 mm<br/>bed width:425 mm<br/>spindle taper:a2-8 <br/>spindle speeds:0-1700 1/min.<br/>spindle bore:155 mm<br/>transmission ratio:2 <br/>tailstock quill diameter:96 mm<br/>tailstock quill stroke:215 mm<br/>taper of tailstock quill:6 mk<br/>max. length of work piece:3000 mm<br/>rapid traverse x/z:10/10 m/min<br/>power requirement:17 kw<br/>weight of the machine ca.:7560 kg<br/>dimensions of the machine ca.:5530x1800x2230 mm<br/>automatic tool changer:8-fach <br/>european electric: <br/>cnc controller:fagor 8055 <br/>ce-design: <br/>tools:1 satz <br/>machine work light: <br/>coolant system: <br/>automatic lubrication system: <br/>electric handwheel: <br/>servo spindle motor: <br/>machine semi-cover: <br/>: <br/>3 chip conveyor: <br/>:auf vorder- und rückseite der spindel, jeweils Ø500m (800 1/min) <br/>mpg hand wheel:kabelgebunden <br/><br/>new cnc lathe kraft st 400/3000 with fanuc oi mate td  made in europe  for more information please see the attached documents SPINDLE PASSAGE:155 MM
TURNING DIAMETER OVER BED:805 MM
TURNING DIAMETER OVER SLIDE:515 MM
TURNING LENGTH:3000 MM
CONTROL:FAGOR 8055
MAX. SWING OVER SLIDE:515 MM
BED WIDTH:425 MM
SPINDLE TAPER:A2-8
SPINDLE SPEEDS:0-1700 1/MIN.
SPINDLE BORE:155 MM
TRANSMISSION RATIO:2
TAILSTOCK QUILL DIAMETER:96 MM
TAILSTOCK QUILL STROKE:215 MM
TAPER OF TAILSTOCK QUILL:6 MK
MAX. LENGTH OF WORK PIECE:3000 MM
RAPID TRAVERSE X/Z:10/10 M/MIN
POWER REQUIREMENT:17 KW
WEIGHT OF THE MACHINE CA.:7560 KG
DIMENSIONS OF THE MACHINE CA.:5530X1800X2230 MM
AUTOMATIC TOOL CHANGER:8-FACH
EUROPEAN ELECTRIC:
CNC CONTROLLER:FAGOR 8055
CE-DESIGN:
TOOLS:1 SATZ
MACHINE WORK LIGHT:
COOLANT SYSTEM:
AUTOMATIC LUBRICATION SYSTEM:
ELECTRIC HANDWHEEL:
SERVO SPINDLE MOTOR:
MACHINE SEMI-COVER:
:
3 CHIP CONVEYOR:
:AUF VORDER- UND RüCKSEITE DER SPINDEL, JEWEILS Ø500M (800 1/MIN)
MPG HAND WHEEL:KABELGEBUNDEN

NEW CNC LATHE KRAFT ST 400/3000 WITH FANUC OI MATE TD MADE IN EUROPE FOR MORE INFORMATION PLEASE SEE THE ATTACHED DOCUMENTS
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-5-axis cnc - controlled tool and cutter grinder
make walter of tuebingen, type helitronic vision,year of 2013, cnc fanuc 31 ia5

technical data:
working range: longitudinal traverse (x- axis) 480 mm, vertical traverse (y-axis) 320 mm, cross traverse (z-axis) 700 mm, rotary table swivelling range (c-axis) +/- 200°, work head spindle iso 50, max. diameter of workpiece 320 mm, max. length of workpiece for peripheral grinding 370 mm, max. length of workpiece for face grinding 320 mm, max. length of workpiece for peripheral grinding 370 mm; max. dia. wheel 200 mm, peak performance grinding spindle 30 kw, grinding spindle speed 0 - 10.000 rpm. connected load approx. 35 kw (400 volts / 50 hz), weight approx. 7100 kg, dimensions w x d x h = 3649 x 2490 x 22301 mm, colour grey ral 7035 / 7043.

accessories:
eco loader for up to 120 cylindrical tools 3 - 32 mm, 
a axis for cylindrical grinding, speed 0-750 rpm,
toolstudio standard and advanced license,
software toolstudio option drills,
software toolstudio option profile light,
software package 1 (cylindrical mills)
software package 2 (tapered mills)
software package 3 (drills)
software package 16 (warmup program)
software package ims (automatic calibration x, y and z axes to loader),
direct drives in all axes with integrated cooling,
complete hydraulic package with device and hydraulic preparation, 
automatic hydraulic actuated steady rest,
probe for exact positioning of the workpiece,
frequency controlled pump 7-20 bar,
2 grinding wheel mounts.

    5-AXIS CNC - CONTROLLED TOOL AND CUTTER GRINDER MAKE WALTER OF TUEBINGEN, TYPE HELITRONIC VISION,YEAR OF 2013, CNC FANUC 31 IA5 TECHNICAL DATA: WORKING RANGE: LONGITUDINAL TRAVERSE (X- AXIS) 480 MM, VERTICAL TRAVERSE (Y-AXIS) 320 MM, CROSS TRAVERSE (Z-AXIS) 700 MM, ROTARY TABLE SWIVELLING RANGE (C-AXIS) +/- 200°, WORK HEAD SPINDLE ISO 50, MAX. DIAMETER OF WORKPIECE 320 MM, MAX. LENGTH OF WORKPIECE FOR PERIPHERAL GRINDING 370 MM, MAX. LENGTH OF WORKPIECE FOR FACE GRINDING 320 MM, MAX. LENGTH OF WORKPIECE FOR PERIPHERAL GRINDING 370 MM; MAX. DIA. WHEEL 200 MM, PEAK PERFORMANCE GRINDING SPINDLE 30 KW, GRINDING SPINDLE SPEED 0 - 10.000 RPM. CONNECTED LOAD APPROX. 35 KW (400 VOLTS / 50 HZ), WEIGHT APPROX. 7100 KG, DIMENSIONS W X D X H = 3649 X 2490 X 22301 MM, COLOUR GREY RAL 7035 / 7043. ACCESSORIES: ECO LOADER FOR UP TO 120 CYLINDRICAL TOOLS 3 - 32 MM, A AXIS FOR CYLINDRICAL GRINDING, SPEED 0-750 RPM, TOOLSTUDIO STANDARD AND ADVANCED LICENSE, SOFTWARE TOOLSTUDIO OPTION DRILLS, SOFTWARE TOOLSTUDIO OPTION PROFILE LIGHT, SOFTWARE PACKAGE 1 (CYLINDRICAL MILLS) SOFTWARE PACKAGE 2 (TAPERED MILLS) SOFTWARE PACKAGE 3 (DRILLS) SOFTWARE PACKAGE 16 (WARMUP PROGRAM) SOFTWARE PACKAGE IMS (AUTOMATIC CALIBRATION X, Y AND Z AXES TO LOADER), DIRECT DRIVES IN ALL AXES WITH INTEGRATED COOLING, COMPLETE HYDRAULIC PACKAGE WITH DEVICE AND HYDRAULIC PREPARATION, AUTOMATIC HYDRAULIC ACTUATED STEADY REST, PROBE FOR EXACT POSITIONING OF THE WORKPIECE, FREQUENCY CONTROLLED PUMP 7-20 BAR, 2 GRINDING WHEEL MOUNTS.
Vendedor: SuS Schleiftechnik und Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-turning diameter:1010 mm<br/>turning length:3000 mm<br/>control:fanuc oi tf mit manual guide <br/>max. swing over slide:718 mm<br/>bed width:500 mm<br/>spindle taper:a2-11 <br/>spindle speeds:0-1400 1/min.<br/>spindle bore:130 mm<br/>transmission ratio:2 <br/>tailstock quill diameter:120 mm<br/>tailstock quill stroke:300 mm<br/>taper of tailstock quill:6 mk<br/>max. length of work piece:3000 mm<br/>rapid traverse x/z:10/10 m/min<br/>power requirement:22 kw<br/>weight of the machine ca.:7600 kg<br/>dimensions of the machine ca.:6325x1800x2230 mm<br/>turret:duplomatic dm tr25 with bmt75 (m. y-achse) <br/>hydr. tailstock quill movement: <br/>servo spindle motor: <br/>c-axis:kontin. mit separatem motor  <br/>y-axis: mm<br/>3-jaw hydraulic chuck:500 <br/>chip conveyor: <br/>auto gear change system: <br/>ce-design: <br/>foot pedal control of tailstock and chuck: <br/>hydraulic unit: <br/>machine work light: <br/>tools:1 satz <br/>coolant system: <br/>european electric: <br/>automatic lubrication system: <br/>electric handwheel: <br/>: <br/><br/>new cnc lathe kraft st 500/3000 with fanuc oi td  made in europe  for more information please see the attached documents TURNING DIAMETER:1010 MM
TURNING LENGTH:3000 MM
CONTROL:FANUC OI TF MIT MANUAL GUIDE
MAX. SWING OVER SLIDE:718 MM
BED WIDTH:500 MM
SPINDLE TAPER:A2-11
SPINDLE SPEEDS:0-1400 1/MIN.
SPINDLE BORE:130 MM
TRANSMISSION RATIO:2
TAILSTOCK QUILL DIAMETER:120 MM
TAILSTOCK QUILL STROKE:300 MM
TAPER OF TAILSTOCK QUILL:6 MK
MAX. LENGTH OF WORK PIECE:3000 MM
RAPID TRAVERSE X/Z:10/10 M/MIN
POWER REQUIREMENT:22 KW
WEIGHT OF THE MACHINE CA.:7600 KG
DIMENSIONS OF THE MACHINE CA.:6325X1800X2230 MM
TURRET:DUPLOMATIC DM TR25 WITH BMT75 (M. Y-ACHSE)
HYDR. TAILSTOCK QUILL MOVEMENT:
SERVO SPINDLE MOTOR:
C-AXIS:KONTIN. MIT SEPARATEM MOTOR
Y-AXIS: MM
3-JAW HYDRAULIC CHUCK:500
CHIP CONVEYOR:
AUTO GEAR CHANGE SYSTEM:
CE-DESIGN:
FOOT PEDAL CONTROL OF TAILSTOCK AND CHUCK:
HYDRAULIC UNIT:
MACHINE WORK LIGHT:
TOOLS:1 SATZ
COOLANT SYSTEM:
EUROPEAN ELECTRIC:
AUTOMATIC LUBRICATION SYSTEM:
ELECTRIC HANDWHEEL:
:

NEW CNC LATHE KRAFT ST 500/3000 WITH FANUC OI TD MADE IN EUROPE FOR MORE INFORMATION PLEASE SEE THE ATTACHED DOCUMENTS
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-2 x rivet head, for 2 and 4 ring mechanics
motor driven
good condition! 2 X RIVET HEAD, FOR 2 AND 4 RING MECHANICS MOTOR DRIVEN GOOD CONDITION!
Vendedor: Maschinenhandel Kmet
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-machine charmilles robofil 300
year of manufacture 1994
location greece
condition very good (8/10)
origin switzerland
stock number 13110
machine dimensions l x l x h 1800 x 1600 x 2230 mm
machine weight (including cnc & tank) 2500 kg
max. work piece weight 1000 kg
max. work piece dimensions 850 x 500 x 400 mm
x y -travel 400 x 250 mm
uv -travel 400 x 250 mm
programmable z travel 0 to 400 mm
collision protection x y z u v
taper angle +/- 30 degree
table movement 0 to 900 mm/min
programmable wire feed rate 0.2 to 15 m/min
programmable wire tension 3 to 30 n
standard diamond wire guide 0.25 mm
automatic wire threading not available
automatic wire re-treading not available
max. threading height not available
min. diameter of threading hole------ not available
standard equipment :

transverse rail

4 water filters

deionisation bottle

note :

this machine is in a very good condition, it is service regularly with all the necessary consumables, has a remarkable accuracy and operates all its life under the protection of a voltage regulator and harmonics filter protection.

the cutting technologies are update to the latest ones and operates with the today's wires with very fast cutting speeds. you can rely on this machine for many years. MACHINE CHARMILLES ROBOFIL 300 YEAR OF MANUFACTURE 1994 LOCATION GREECE CONDITION VERY GOOD (8/10) ORIGIN SWITZERLAND STOCK NUMBER 13110 MACHINE DIMENSIONS L X L X H 1800 X 1600 X 2230 MM MACHINE WEIGHT (INCLUDING CNC & TANK) 2500 KG MAX. WORK PIECE WEIGHT 1000 KG MAX. WORK PIECE DIMENSIONS 850 X 500 X 400 MM X Y -TRAVEL 400 X 250 MM UV -TRAVEL 400 X 250 MM PROGRAMMABLE Z TRAVEL 0 TO 400 MM COLLISION PROTECTION X Y Z U V TAPER ANGLE +/- 30 DEGREE TABLE MOVEMENT 0 TO 900 MM/MIN PROGRAMMABLE WIRE FEED RATE 0.2 TO 15 M/MIN PROGRAMMABLE WIRE TENSION 3 TO 30 N STANDARD DIAMOND WIRE GUIDE 0.25 MM AUTOMATIC WIRE THREADING NOT AVAILABLE AUTOMATIC WIRE RE-TREADING NOT AVAILABLE MAX. THREADING HEIGHT NOT AVAILABLE MIN. DIAMETER OF THREADING HOLE------ NOT AVAILABLE STANDARD EQUIPMENT : TRANSVERSE RAIL 4 WATER FILTERS DEIONISATION BOTTLE NOTE : THIS MACHINE IS IN A VERY GOOD CONDITION, IT IS SERVICE REGULARLY WITH ALL THE NECESSARY CONSUMABLES, HAS A REMARKABLE ACCURACY AND OPERATES ALL ITS LIFE UNDER THE PROTECTION OF A VOLTAGE REGULATOR AND HARMONICS FILTER PROTECTION. THE CUTTING TECHNOLOGIES ARE UPDATE TO THE LATEST ONES AND OPERATES WITH THE TODAY'S WIRES WITH VERY FAST CUTTING SPEEDS. YOU CAN RELY ON THIS MACHINE FOR MANY YEARS.
Vendedor: PROFIT Machinery Point Ltd
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 1.700 €
Ubicación: Land-manufacturer: topcon.
model: trc-50x.
retinal camera with sub table, mobile, with goto camera by ser. no.: 357432.
dimensions: 550 x 600 x 1660.
elek. voltage: 220v
elek. power: 1500va.

ps: on our homepage, you will find more different medical devices.
we are looking forward to your requests.
lg MANUFACTURER: TOPCON. MODEL: TRC-50X. RETINAL CAMERA WITH SUB TABLE, MOBILE, WITH GOTO CAMERA BY SER. NO.: 357432. DIMENSIONS: 550 X 600 X 1660. ELEK. VOLTAGE: 220V ELEK. POWER: 1500VA. PS: ON OUR HOMEPAGE, YOU WILL FIND MORE DIFFERENT MEDICAL DEVICES. WE ARE LOOKING FORWARD TO YOUR REQUESTS. LG
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more TOPCON types: