24805 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-heidelberg suprasetter a75 gene. iii
year 2013
22 plates / h
64 diodes
laser imaging time about 4.900 h
computer
metashooter
olp
azzura c85 plate processor
exposure time about 4.900 h
plate count about 138,000
good condition
available immediately HEIDELBERG SUPRASETTER A75 GENE. III YEAR 2013 22 PLATES / H 64 DIODES LASER IMAGING TIME ABOUT 4.900 H COMPUTER METASHOOTER OLP AZZURA C85 PLATE PROCESSOR EXPOSURE TIME ABOUT 4.900 H PLATE COUNT ABOUT 138,000 GOOD CONDITION AVAILABLE IMMEDIATELY
Vendedor: M-Vision
Año de construcción: usado
Ubicación: Land-[embed]https://youtu.be/sji9llsak-s[/embed]

<strong>state: machine still working by customer
</strong>

ix-axis travel (mm):
x-axis travel (mm):
x-axis travel (mm):
worktank length:
worktank width:
worktank height:
max. workpiece length:
max. workpiece width:
max. workpiece height:
max. workpiece weight:
taper angle/height:
automatic wire feeding:
length x width x height:
weight (kg):
worked power hours:

<em>the technical data and illustrations are not binding. they are not warranted characteristics and are subject to change.</em> [EMBED]HTTPS://YOUTU.BE/SJI9LLSAK-S[/EMBED] STATE: MACHINE STILL WORKING BY CUSTOMER IX-AXIS TRAVEL (MM): X-AXIS TRAVEL (MM): X-AXIS TRAVEL (MM): WORKTANK LENGTH: WORKTANK WIDTH: WORKTANK HEIGHT: MAX. WORKPIECE LENGTH: MAX. WORKPIECE WIDTH: MAX. WORKPIECE HEIGHT: MAX. WORKPIECE WEIGHT: TAPER ANGLE/HEIGHT: AUTOMATIC WIRE FEEDING: LENGTH X WIDTH X HEIGHT: WEIGHT (KG): WORKED POWER HOURS: THE TECHNICAL DATA AND ILLUSTRATIONS ARE NOT BINDING. THEY ARE NOT WARRANTED CHARACTERISTICS AND ARE SUBJECT TO CHANGE.
Vendedor: ibeXtra Sàrl
Año de construcción: usado
Ubicación: Land-dear's

sale, please kindly note that,now have to mtu 12v396 tb94 2 pcs with reduction gear

2 x mtu 12v396 tb94
built : 1987
power : 1570 kw
rpm : 1975
1.	working hours : 3620
2.	working hours : 3612
running condition
best regards
hakan kuscu
info@kscege.com
  DEAR'S SALE, PLEASE KINDLY NOTE THAT,NOW HAVE TO MTU 12V396 TB94 2 PCS WITH REDUCTION GEAR 2 X MTU 12V396 TB94 BUILT : 1987 POWER : 1570 KW RPM : 1975 1. WORKING HOURS : 3620 2. WORKING HOURS : 3612 RUNNING CONDITION BEST REGARDS HAKAN KUSCU INFO@KSCEGE.COM
Vendedor: KsC Egeteknik Ltd.
Año de construcción: usado
Precio: 45.500 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-travel in x: 900 mm
travel in y: 500 mm
travel in z: 500 mm
table size: 500 x 1000 mm
speed range: 40-4000 rpm
tool holder: sk 40
total power consumption: approx. 7,5 kw / 400 v
machine weight: 3500 kg

equipment / accessories:

cnc railway control heidenhain tnc 355
12 - event wechseler - fold currently logged out
solid angle table 1000 x 500 mm
universal swivel head with drill spindle, hub 90 mm
electr. handwheel
div. toolholders
full cabin
coolant system
documentation

all technical specifications have been created according to our best knowledge and existing documents; expressly reserved by mistake.
each party has the opportunity to test the machine in advance under power. TRAVEL IN X: 900 MM TRAVEL IN Y: 500 MM TRAVEL IN Z: 500 MM TABLE SIZE: 500 X 1000 MM SPEED RANGE: 40-4000 RPM TOOL HOLDER: SK 40 TOTAL POWER CONSUMPTION: APPROX. 7,5 KW / 400 V MACHINE WEIGHT: 3500 KG EQUIPMENT / ACCESSORIES: CNC RAILWAY CONTROL HEIDENHAIN TNC 355 12 - EVENT WECHSELER - FOLD CURRENTLY LOGGED OUT SOLID ANGLE TABLE 1000 X 500 MM UNIVERSAL SWIVEL HEAD WITH DRILL SPINDLE, HUB 90 MM ELECTR. HANDWHEEL DIV. TOOLHOLDERS FULL CABIN COOLANT SYSTEM DOCUMENTATION ALL TECHNICAL SPECIFICATIONS HAVE BEEN CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EACH PARTY HAS THE OPPORTUNITY TO TEST THE MACHINE IN ADVANCE UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Precio: 31.500 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-oil and gas subsea production trees
two (2) production spool tree assemblies, two (2) water injection spool tree assemblies, water injection spool tree assemblies, production flow base assemblies, tube hangers, tree caps, plugs, sleeves, adapters, base assemblies, housings, year 2006 to 2009, new surplus, never used. priced for immediate sale with considerable savings.
OIL AND GAS SUBSEA PRODUCTION TREES TWO (2) PRODUCTION SPOOL TREE ASSEMBLIES, TWO (2) WATER INJECTION SPOOL TREE ASSEMBLIES, WATER INJECTION SPOOL TREE ASSEMBLIES, PRODUCTION FLOW BASE ASSEMBLIES, TUBE HANGERS, TREE CAPS, PLUGS, SLEEVES, ADAPTERS, BASE ASSEMBLIES, HOUSINGS, YEAR 2006 TO 2009, NEW SURPLUS, NEVER USED. PRICED FOR IMMEDIATE SALE WITH CONSIDERABLE SAVINGS.
Vendedor: Brown Energy Group Inc
Año de construcción: usado
Precio: 2.200 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-wellhead connectors cameron 18-3/4” high capacity collet connectors
two (2) cameron 18-3/4” type hc high capacity collet connectors, subsea wellhead connectors.one connector certified with valid certificate and the other connector certification expired but can be recertified. priced to sell at low price.

WELLHEAD CONNECTORS CAMERON 18-3/4” HIGH CAPACITY COLLET CONNECTORS TWO (2) CAMERON 18-3/4” TYPE HC HIGH CAPACITY COLLET CONNECTORS, SUBSEA WELLHEAD CONNECTORS.ONE CONNECTOR CERTIFIED WITH VALID CERTIFICATE AND THE OTHER CONNECTOR CERTIFICATION EXPIRED BUT CAN BE RECERTIFIED. PRICED TO SELL AT LOW PRICE.
Vendedor: Brown Energy Group Inc
Año de construcción: usado
Precio: 10.150 EU€
Ubicación: Land-machine for machining by milling and drilling. lack of documentation. MACHINE FOR MACHINING BY MILLING AND DRILLING. LACK OF DOCUMENTATION.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-3125 kva allison 501kb gas turbine generator 
3125 kva allison 501kb gas turbine generator, allison 501kb turbine engine coupled to a allen gearbox and brush generator, all mounted on a heavy duty steel base frame, natural gas fuel, 3125 kva/2500 kw, 11000 volts, 50 hz, only 1500 hours since new. the turbine package was used for standby power at a production facility and is very well maintained. allison heavy duty turbines are dependable and are known for delivering reliable power to worldwide facilities. the first major maintenance is not required until 30,000 hours. complete package.
3125 KVA ALLISON 501KB GAS TURBINE GENERATOR 3125 KVA ALLISON 501KB GAS TURBINE GENERATOR, ALLISON 501KB TURBINE ENGINE COUPLED TO A ALLEN GEARBOX AND BRUSH GENERATOR, ALL MOUNTED ON A HEAVY DUTY STEEL BASE FRAME, NATURAL GAS FUEL, 3125 KVA/2500 KW, 11000 VOLTS, 50 HZ, ONLY 1500 HOURS SINCE NEW. THE TURBINE PACKAGE WAS USED FOR STANDBY POWER AT A PRODUCTION FACILITY AND IS VERY WELL MAINTAINED. ALLISON HEAVY DUTY TURBINES ARE DEPENDABLE AND ARE KNOWN FOR DELIVERING RELIABLE POWER TO WORLDWIDE FACILITIES. THE FIRST MAJOR MAINTENANCE IS NOT REQUIRED UNTIL 30,000 HOURS. COMPLETE PACKAGE.
Vendedor: Brown Energy Group Inc
Año de construcción: usado
Precio: 8.700 EU€
Ubicación: Land-uniplan - finishhobel - planer planing to the highest quality, at the end of machining equipped with hydro-heads UNIPLAN - FINISHHOBEL - PLANER PLANING TO THE HIGHEST QUALITY, AT THE END OF MACHINING EQUIPPED WITH HYDRO-HEADS
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-12000 x 4000mm
hypertherm 260amp xd high def plasma
edge pro cnc control 12000 X 4000MM HYPERTHERM 260AMP XD HIGH DEF PLASMA EDGE PRO CNC CONTROL
Vendedor: IndustrialMachinesNet Ltd
Año de construcción: usado
Precio: 6.900 EU€
Ubicación: Land-the machine has two tables to the pallet nailing. while nailing pallets on one form, the personnel operating the machine are arranged to another pallet on the second form, and so alternately. such a work system provides full use of the machine to operate. the using of the machine requires two employees. THE MACHINE HAS TWO TABLES TO THE PALLET NAILING. WHILE NAILING PALLETS ON ONE FORM, THE PERSONNEL OPERATING THE MACHINE ARE ARRANGED TO ANOTHER PALLET ON THE SECOND FORM, AND SO ALTERNATELY. SUCH A WORK SYSTEM PROVIDES FULL USE OF THE MACHINE TO OPERATE. THE USING OF THE MACHINE REQUIRES TWO EMPLOYEES.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-very rarely used complete canning line 3,500 cph  VERY RARELY USED COMPLETE CANNING LINE 3,500 CPH
Vendedor: SBS Ayrshire Ltd
Año de construcción: usado
Precio: 24.950 EU€
Ubicación: Land-round balers are designed for bales of grass or hay. the picking of the spoil takes place from the swath with a pick-up and the machine is driven from the farm tractor via a power take-off. complete machine in good condition. ROUND BALERS ARE DESIGNED FOR BALES OF GRASS OR HAY. THE PICKING OF THE SPOIL TAKES PLACE FROM THE SWATH WITH A PICK-UP AND THE MACHINE IS DRIVEN FROM THE FARM TRACTOR VIA A POWER TAKE-OFF. COMPLETE MACHINE IN GOOD CONDITION.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-isobaric triblock 500bph .75l 1,000 bph .25l, ropp and crown caps. also premix carbonator and pasteuriser.

only used on trials and has only run 2,000 bottles total,in as new condition. ISOBARIC TRIBLOCK 500BPH .75L 1,000 BPH .25L, ROPP AND CROWN CAPS. ALSO PREMIX CARBONATOR AND PASTEURISER. ONLY USED ON TRIALS AND HAS ONLY RUN 2,000 BOTTLES TOTAL,IN AS NEW CONDITION.
Vendedor: SBS Ayrshire Ltd
Año de construcción: usado
Precio: 60.000 EU€
Ubicación: Land-machine within the factory warranty period (24 months, or 2000 hours). complete, efficient, no damage, no signs of repair. operation of engine and assemblies without remarks. MACHINE WITHIN THE FACTORY WARRANTY PERIOD (24 MONTHS, OR 2000 HOURS). COMPLETE, EFFICIENT, NO DAMAGE, NO SIGNS OF REPAIR. OPERATION OF ENGINE AND ASSEMBLIES WITHOUT REMARKS.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-code: 0542
brand: nuova progetti
model: np 4 - ce standard 

cnc  working  center hinge boring inserting machine  /  milling machine  - ce standard  

cnc working center for milling, drilling and screwing  on doors, window and door frames, laminated plastics.  suitable for locks' and counter-plates housings ,  and  all standard hardwares  both in horizontal and in vertical .the machine inserts and screws standard or  double-leg anuba hinges .

technical data  
worktable dimensions mm 4000 x 180  - table height  900 mm 
electrospindle  kw  3,3  - 18.000 rpm - tool attachment for clamp  er32
useful stroke axis  x mm 2800  - useful stroke axis  y  mm 350 - useful stroke axis  z mm 100
working units  inclination  from - 5° to  + 90°
operating head drilling/screwing motor kw 1,5 - 900  rpm
installed power  7 kw
operating pressure  6/7 atm
automatic  switch from door to frame 
incremental gauge
management by  pc  with color video and  dedicated  software
time to execute  lock  about  25 seconds
time for  drilling/ screwing  cycle about  12 seconds
overall dimansions - machine :  mm 4200 x 1700 x 1700 h
overall dimensions  - electrical cabinet  :  mm 600 x 500 x 1800 h 
weight kg 1250



 CODE: 0542 BRAND: NUOVA PROGETTI MODEL: NP 4 - CE STANDARD CNC WORKING CENTER HINGE BORING INSERTING MACHINE / MILLING MACHINE - CE STANDARD CNC WORKING CENTER FOR MILLING, DRILLING AND SCREWING ON DOORS, WINDOW AND DOOR FRAMES, LAMINATED PLASTICS. SUITABLE FOR LOCKS' AND COUNTER-PLATES HOUSINGS , AND ALL STANDARD HARDWARES BOTH IN HORIZONTAL AND IN VERTICAL .THE MACHINE INSERTS AND SCREWS STANDARD OR DOUBLE-LEG ANUBA HINGES . TECHNICAL DATA WORKTABLE DIMENSIONS MM 4000 X 180 - TABLE HEIGHT 900 MM ELECTROSPINDLE KW 3,3 - 18.000 RPM - TOOL ATTACHMENT FOR CLAMP ER32 USEFUL STROKE AXIS X MM 2800 - USEFUL STROKE AXIS Y MM 350 - USEFUL STROKE AXIS Z MM 100 WORKING UNITS INCLINATION FROM - 5° TO + 90° OPERATING HEAD DRILLING/SCREWING MOTOR KW 1,5 - 900 RPM INSTALLED POWER 7 KW OPERATING PRESSURE 6/7 ATM AUTOMATIC SWITCH FROM DOOR TO FRAME INCREMENTAL GAUGE MANAGEMENT BY PC WITH COLOR VIDEO AND DEDICATED SOFTWARE TIME TO EXECUTE LOCK ABOUT 25 SECONDS TIME FOR DRILLING/ SCREWING CYCLE ABOUT 12 SECONDS OVERALL DIMANSIONS - MACHINE : MM 4200 X 1700 X 1700 H OVERALL DIMENSIONS - ELECTRICAL CABINET : MM 600 X 500 X 1800 H WEIGHT KG 1250
Vendedor: TOMESANI Srl
Año de construcción: usado
Precio: 2.825 EU€
Ubicación: Land-pneumatic table for whipping euro epal 80 x 120 pallets, allows for correct placement of nailed elements and precise nailing of nails in predetermined positions. PNEUMATIC TABLE FOR WHIPPING EURO EPAL 80 X 120 PALLETS, ALLOWS FOR CORRECT PLACEMENT OF NAILED ELEMENTS AND PRECISE NAILING OF NAILS IN PREDETERMINED POSITIONS.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-diesel engine: 429 hp

fine shredding  basket / screen
discharge conveyor
lift-axle
radio remote control DIESEL ENGINE: 429 HP FINE SHREDDING BASKET / SCREEN DISCHARGE CONVEYOR LIFT-AXLE RADIO REMOTE CONTROL
Vendedor: Hawamex Recycling und Umwelttechnik GmbH & Co. KG
Año de construcción: usado
Precio: 22.000 EU€
Ubicación: Land-the machine is designed for eco-friendly removal of paints and contaminants using a spray of baking soda in various granulations. possibility to use other cleaners - glass, corundum, sand, etc. from the smallest grain granulation (baking soda) to the thickest 2-3 mm. smooth regulation of cleaning power, with surface smooth and rough, without damage. waste throws dry and in water-free modes, hydrodynamically and in a water mix. round nozzles from size # 3 to # 4 and flat nozzles are possible. construction of a carbon and brass steel cleaner, grooved palette. THE MACHINE IS DESIGNED FOR ECO-FRIENDLY REMOVAL OF PAINTS AND CONTAMINANTS USING A SPRAY OF BAKING SODA IN VARIOUS GRANULATIONS. POSSIBILITY TO USE OTHER CLEANERS - GLASS, CORUNDUM, SAND, ETC. FROM THE SMALLEST GRAIN GRANULATION (BAKING SODA) TO THE THICKEST 2-3 MM. SMOOTH REGULATION OF CLEANING POWER, WITH SURFACE SMOOTH AND ROUGH, WITHOUT DAMAGE. WASTE THROWS DRY AND IN WATER-FREE MODES, HYDRODYNAMICALLY AND IN A WATER MIX. ROUND NOZZLES FROM SIZE # 3 TO # 4 AND FLAT NOZZLES ARE POSSIBLE. CONSTRUCTION OF A CARBON AND BRASS STEEL CLEANER, GROOVED PALETTE.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land--tool travel : 0-250 [mm],
-tool to column distance : 380 - 410 [mm],
-ram adjustment : 250 [mm],
-worktable dimensions : 300 x 600 [mm],
-Ø dividing table : 300 [mm]
-head to table distance : 420 [mm],
-longitudinal travel : 270 [mm],
-cross travel : 350 [mm],
-strokes per minute : 20 to 80,
-main motor power : 3 [hp].

-net weight : 1200 [kg],
-overal dimensions : 1400 x 1100 x 1900 [mm].


standard options :

-automatic tool stop,
-self-braking motor,
-automatic feeding of the table on the transversal axis,
-low tension electrical equipment,
-service lamp 24 [v],
-digital luminous display for strokes per minute,
-variable speed on the « strokes per minutes » function,
-rotating  table for dividing operations,
-centralized manual lubrication,
-complete coolant system (pump + tank).

accessories included:

-1 chuck rohm type zg Ø200 [mm] 3 concentric jaws with its locking key,
-8 sets of 3 jaws rohm,
-11 adaptators for differents cutting tools mounting,
-2 attachements for the rohm chuck,
-1 set of many cutting tools.

machine in very nice condition.


prix vat excluded, on request.

shipping in france and europe is possible.


more pictures and details on request. -TOOL TRAVEL : 0-250 [MM], -TOOL TO COLUMN DISTANCE : 380 - 410 [MM], -RAM ADJUSTMENT : 250 [MM], -WORKTABLE DIMENSIONS : 300 X 600 [MM], -Ø DIVIDING TABLE : 300 [MM] -HEAD TO TABLE DISTANCE : 420 [MM], -LONGITUDINAL TRAVEL : 270 [MM], -CROSS TRAVEL : 350 [MM], -STROKES PER MINUTE : 20 TO 80, -MAIN MOTOR POWER : 3 [HP]. -NET WEIGHT : 1200 [KG], -OVERAL DIMENSIONS : 1400 X 1100 X 1900 [MM]. STANDARD OPTIONS : -AUTOMATIC TOOL STOP, -SELF-BRAKING MOTOR, -AUTOMATIC FEEDING OF THE TABLE ON THE TRANSVERSAL AXIS, -LOW TENSION ELECTRICAL EQUIPMENT, -SERVICE LAMP 24 [V], -DIGITAL LUMINOUS DISPLAY FOR STROKES PER MINUTE, -VARIABLE SPEED ON THE « STROKES PER MINUTES » FUNCTION, -ROTATING TABLE FOR DIVIDING OPERATIONS, -CENTRALIZED MANUAL LUBRICATION, -COMPLETE COOLANT SYSTEM (PUMP + TANK). ACCESSORIES INCLUDED: -1 CHUCK ROHM TYPE ZG Ø200 [MM] 3 CONCENTRIC JAWS WITH ITS LOCKING KEY, -8 SETS OF 3 JAWS ROHM, -11 ADAPTATORS FOR DIFFERENTS CUTTING TOOLS MOUNTING, -2 ATTACHEMENTS FOR THE ROHM CHUCK, -1 SET OF MANY CUTTING TOOLS. MACHINE IN VERY NICE CONDITION. PRIX VAT EXCLUDED, ON REQUEST. SHIPPING IN FRANCE AND EUROPE IS POSSIBLE. MORE PICTURES AND DETAILS ON REQUEST.
Vendedor: SARL Kraffter
Año de construcción: usado
Ubicación: Land-rotary valve for air transport (1x), make dmn westinghouse, type bl-300 mzc easy clean, new unknown (manufacturer tag is missing), house material stainless steel, rotor material stainless steel, rotor diameter 300mm, rotor width 380mm, inlet dia. 315mm, outlet dia. 125mm, outlet flange sizes dia. 225mm, with motor 1,1 kw, 220/380 volt, floorspace 1,6x0,9 m, total height 0,7 m, weight 500 kgrotating valvesrotary valves > rotating valves what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! ROTARY VALVE FOR AIR TRANSPORT (1X), MAKE DMN WESTINGHOUSE, TYPE BL-300 MZC EASY CLEAN, NEW UNKNOWN (MANUFACTURER TAG IS MISSING), HOUSE MATERIAL STAINLESS STEEL, ROTOR MATERIAL STAINLESS STEEL, ROTOR DIAMETER 300MM, ROTOR WIDTH 380MM, INLET DIA. 315MM, OUTLET DIA. 125MM, OUTLET FLANGE SIZES DIA. 225MM, WITH MOTOR 1,1 KW, 220/380 VOLT, FLOORSPACE 1,6X0,9 M, TOTAL HEIGHT 0,7 M, WEIGHT 500 KGROTATING VALVESROTARY VALVES > ROTATING VALVES WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-diesel engine: 340 hp
max. working  width: 5.00 m
max. windrow height: 2.40 m
max. windrow-cross section: 6.5 m²
throughput: up to 3.500 m³ per hour
hydrostatic roller drive
hydrostatic vehicle drive
weight: approx. 13.400 kg DIESEL ENGINE: 340 HP MAX. WORKING WIDTH: 5.00 M MAX. WINDROW HEIGHT: 2.40 M MAX. WINDROW-CROSS SECTION: 6.5 M² THROUGHPUT: UP TO 3.500 M³ PER HOUR HYDROSTATIC ROLLER DRIVE HYDROSTATIC VEHICLE DRIVE WEIGHT: APPROX. 13.400 KG
Vendedor: Hawamex Recycling und Umwelttechnik GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-metering screw, make brabender, type fw 40/5 plus-50, no 07000320007, new 2007, material stainless steel, screw diameter 40, pitch 40, hopper sizes 310 x 300, outlet 55, with motor 0,37 kw / 220/380 volt, screw speed 96, hopper with flexible wall, mounted on frame, mounted on wheels, floorspace 1,0 x 0,6 m, total height 1,6 m, weight 350 kgmetering screwsconveyor screws > metering screws what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! METERING SCREW, MAKE BRABENDER, TYPE FW 40/5 PLUS-50, NO 07000320007, NEW 2007, MATERIAL STAINLESS STEEL, SCREW DIAMETER 40, PITCH 40, HOPPER SIZES 310 X 300, OUTLET 55, WITH MOTOR 0,37 KW / 220/380 VOLT, SCREW SPEED 96, HOPPER WITH FLEXIBLE WALL, MOUNTED ON FRAME, MOUNTED ON WHEELS, FLOORSPACE 1,0 X 0,6 M, TOTAL HEIGHT 1,6 M, WEIGHT 350 KGMETERING SCREWSCONVEYOR SCREWS > METERING SCREWS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 260 €
Ubicación: Land-pendulum saw irion with supporting table
l x w x h: 3.0 x 1.2 x 1.8 m
weight approx. 670 kg
built in 1960

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden matec systems + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12      


  PENDULUM SAW IRION WITH SUPPORTING TABLE L X W X H: 3.0 X 1.2 X 1.8 M WEIGHT APPROX. 670 KG BUILT IN 1960 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEMS + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Precio: 5.000 €
Ubicación: Land-ge digital energy sg series ce, ups system including 30x batteries, s1060-4208-b030a, , 870x650x1900mm, 900x800x1800mm GE DIGITAL ENERGY SG SERIES CE, UPS SYSTEM INCLUDING 30X BATTERIES, S1060-4208-B030A, , 870X650X1900MM, 900X800X1800MM
Vendedor: DPX Power BV
Año de construcción: usado
Precio: 270 €
Ubicación: Land-double shaft grinder schneeberger

with polishing wheel
l x w x h: 60 x 40 x 50 cm
weight approx. 60 kg
built in 1965

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden matec systems + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12      


  DOUBLE SHAFT GRINDER SCHNEEBERGER WITH POLISHING WHEEL L X W X H: 60 X 40 X 50 CM WEIGHT APPROX. 60 KG BUILT IN 1965 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEMS + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Precio: 3.500 €
Ubicación: Land-; gross weight [kg]: 5000 ; GROSS WEIGHT [KG]: 5000
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-seriously automatic sheet metal deburring machine mod titan 1400 edd / bj. 2012 / working width 1400 / workpiece height max. 150 / 3 work items / workpiece weight 800 kg / grinding roller ã? 420 / 1 - 4 m min. / 28 kw / abrasive 1400 x 1540 long / extra: dust extractor mod te 5000 - absa ugluftleistung: 5,000 m â³ h / good condition
fe.gi.maschinen.sbg.at

seriously automatic sheet metal deburring machine mod titan 1400 edd / year 2012 / working width 1400 / workpiece height max. 150 / 3 working element / workpiece weight 800 kg / grinding roller ã? 420 / 1-4 m-min. / 28 kw / abrasive 1400 x 1540 long / extra: dust extractor mod te 5000 - e xhaust air flow: 5,000 m â³ h / good condition
fe.gi.maschinen.sbg.at SERIOUSLY AUTOMATIC SHEET METAL DEBURRING MACHINE MOD TITAN 1400 EDD / BJ. 2012 / WORKING WIDTH 1400 / WORKPIECE HEIGHT MAX. 150 / 3 WORK ITEMS / WORKPIECE WEIGHT 800 KG / GRINDING ROLLER &ATILDE;? 420 / 1 - 4 M MIN. / 28 KW / ABRASIVE 1400 X 1540 LONG / EXTRA: DUST EXTRACTOR MOD TE 5000 - ABSA UGLUFTLEISTUNG: 5,000 M &ACIRC;&SUP3; H / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT SERIOUSLY AUTOMATIC SHEET METAL DEBURRING MACHINE MOD TITAN 1400 EDD / YEAR 2012 / WORKING WIDTH 1400 / WORKPIECE HEIGHT MAX. 150 / 3 WORKING ELEMENT / WORKPIECE WEIGHT 800 KG / GRINDING ROLLER &ATILDE;? 420 / 1-4 M-MIN. / 28 KW / ABRASIVE 1400 X 1540 LONG / EXTRA: DUST EXTRACTOR MOD TE 5000 - E XHAUST AIR FLOW: 5,000 M &ACIRC;&SUP3; H / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools
Año de construcción: usado
Precio: 3.900 €
Ubicación: Land-; gross weight [kg]: 1500; accessories: stahldach ; GROSS WEIGHT [KG]: 1500; ACCESSORIES: STAHLDACH
Vendedor: DPX Power BV
Año de construcción: usado
Precio: 760 €
Ubicación: Land-gluing stand pneum..

format l: 3 m b: 2 m
l x w x h: 3.0 x 1,40 x 2.2 m
built in 1975
weight 350 kg

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden matec systems + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12      


 

 GLUING STAND PNEUM.. FORMAT L: 3 M B: 2 M L X W X H: 3.0 X 1,40 X 2.2 M BUILT IN 1975 WEIGHT 350 KG THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEMS + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Precio: 2.750 €
Ubicación: Land-; gross weight [kg]: 510; engine: yanmar yeg160ptls-5r; accessories: control panel, stahldach ; GROSS WEIGHT [KG]: 510; ENGINE: YANMAR YEG160PTLS-5R; ACCESSORIES: CONTROL PANEL, STAHLDACH
Vendedor: DPX Power BV
Año de construcción: usado
Precio: 1.980 €
Ubicación: Land-veneer press steinemann regina hydr.

press area 250 x 140 cm with hot water panels
l x w x h: 300 x 180 x 190 cm
weight approx. 4 to
built in 1960

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden matec systems + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12      


 



 VENEER PRESS STEINEMANN REGINA HYDR. PRESS AREA 250 X 140 CM WITH HOT WATER PANELS L X W X H: 300 X 180 X 190 CM WEIGHT APPROX. 4 TO BUILT IN 1960 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEMS + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 10348; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 227 ; GROSS WEIGHT [KG]: 10348; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 227
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-for grain, shrot and other pourable scraps.
it is promoted with precision chain and fabric-reinforced drivers

- stable steel version
-drive head can be mounted either left and right
-mounting shaft is easily accessible through two large openings
-outlet of 200 mm round
-total height 5m
-5,5kw
-40.0 t / h FOR GRAIN, SHROT AND OTHER POURABLE SCRAPS. IT IS PROMOTED WITH PRECISION CHAIN AND FABRIC-REINFORCED DRIVERS - STABLE STEEL VERSION -DRIVE HEAD CAN BE MOUNTED EITHER LEFT AND RIGHT -MOUNTING SHAFT IS EASILY ACCESSIBLE THROUGH TWO LARGE OPENINGS -OUTLET OF 200 MM ROUND -TOTAL HEIGHT 5M -5,5KW -40.0 T / H
Vendedor: AMA
Año de construcción: usado
Precio: 20.900 €
Ubicación: Land-; gross weight [kg]: 13850; rear tyres remaining: 50; front tyres remaining: 50; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 13850; REAR TYRES REMAINING: 50; FRONT TYRES REMAINING: 50; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 290 €
Ubicación: Land-milling cutter sharpening machine schneeberger

l x w x h: 80 x 80 x 150 cm
weight approx. 390 kg
built in 1965

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden matec systems + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12      


  MILLING CUTTER SHARPENING MACHINE SCHNEEBERGER L X W X H: 80 X 80 X 150 CM WEIGHT APPROX. 390 KG BUILT IN 1965 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEMS + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 7402; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 227 ; GROSS WEIGHT [KG]: 7402; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 227
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 270 €
Ubicación: Land-planer blades shcã¤rfmaschine gf

working length 450 mm
l x w x h: 1.20 x 80 x 1,60 m
weight approx. 680 kg
built in 1959

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden matec systems + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12      


 

 PLANER BLADES SHC&ATILDE;&CURREN;RFMASCHINE GF WORKING LENGTH 450 MM L X W X H: 1.20 X 80 X 1,60 M WEIGHT APPROX. 680 KG BUILT IN 1959 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEMS + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 7402; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 227 ; GROSS WEIGHT [KG]: 7402; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 227
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-stephan cutter mixer for process cheese melted cheese cream cheese 
included vacuum pump control panel valves accesories and spare parts 
capacity 600 liter 
750 - 1500 - 3000 rpm cutter 
side scraper and mixer 
direct steam injectors 
jackated for heating and cooling 
vacuum able with vacuum pump 
year 1999
origin germany 
 STEPHAN CUTTER MIXER FOR PROCESS CHEESE MELTED CHEESE CREAM CHEESE INCLUDED VACUUM PUMP CONTROL PANEL VALVES ACCESORIES AND SPARE PARTS CAPACITY 600 LITER 750 - 1500 - 3000 RPM CUTTER SIDE SCRAPER AND MIXER DIRECT STEAM INJECTORS JACKATED FOR HEATING AND COOLING VACUUM ABLE WITH VACUUM PUMP YEAR 1999 ORIGIN GERMANY
Vendedor: BAYRAM MAKINA
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 7402; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 227 ; GROSS WEIGHT [KG]: 7402; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 227
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 270 €
Ubicación: Land-circular saw sharpening machine vollmer cns

l x w x h: 120 x 80 x 180 cm
built in 1958
weight approx. 580 kg

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden matec systems + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12      


  CIRCULAR SAW SHARPENING MACHINE VOLLMER CNS L X W X H: 120 X 80 X 180 CM BUILT IN 1958 WEIGHT APPROX. 580 KG THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEMS + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 7402; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 227 ; GROSS WEIGHT [KG]: 7402; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 227
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-year of construction: 1999
hours of operation machine: 57.720 h (21.02.2019)
hours of operation a laser: 57.849 h (21.02.2019)
hours of operation a beam: 27.379 h (21.02.2019)
laser power: 3000 watts
working range: 2500 x 1250 x 115 mm
control: siemens sinumerik 840 d
max steel approximately: 20 mm
max stainless steel approx.: 12 mm
max aluminium approx.: 8 mm
space requirement approx.: 6500 x 4800 x 2000 mm
approximate weight machine: 7,500 kg
power consumption: 65 kva

standard equipment
-closed machine frame with integrated laser unit
-lighting of workroom
-oil spray
-position laser diode
-sprintlas
-autolas - hi-las

trumpf laser
tlf 3000, rf excited co2 laser
-cooling unit
-cutting gas pressure setting can be programmed
-logbook function laser

cutting head
-laserschneidopf with 5 "lens
-laserschneidopf with 7.5 "lens
-cutting head quick change facility

control
-automatic switch-off
-control sinumerik 840 d
-contourlas
-bnc / rj45 network connector
-3.5 "floppy disk drive

security
-multi-chamber exhaust system
-compact dust collector programming
-shop floor programming lite tops 100

advanced machine equipment
-automatic pallet changer
-cateye

technical data subject to change - subject to prior sale
the operating hours for delivery of the machine may differ from the hours recorded in the offer YEAR OF CONSTRUCTION: 1999 HOURS OF OPERATION MACHINE: 57.720 H (21.02.2019) HOURS OF OPERATION A LASER: 57.849 H (21.02.2019) HOURS OF OPERATION A BEAM: 27.379 H (21.02.2019) LASER POWER: 3000 WATTS WORKING RANGE: 2500 X 1250 X 115 MM CONTROL: SIEMENS SINUMERIK 840 D MAX STEEL APPROXIMATELY: 20 MM MAX STAINLESS STEEL APPROX.: 12 MM MAX ALUMINIUM APPROX.: 8 MM SPACE REQUIREMENT APPROX.: 6500 X 4800 X 2000 MM APPROXIMATE WEIGHT MACHINE: 7,500 KG POWER CONSUMPTION: 65 KVA STANDARD EQUIPMENT -CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT -LIGHTING OF WORKROOM -OIL SPRAY -POSITION LASER DIODE -SPRINTLAS -AUTOLAS - HI-LAS TRUMPF LASER TLF 3000, RF EXCITED CO2 LASER -COOLING UNIT -CUTTING GAS PRESSURE SETTING CAN BE PROGRAMMED -LOGBOOK FUNCTION LASER CUTTING HEAD -LASERSCHNEIDOPF WITH 5 "LENS -LASERSCHNEIDOPF WITH 7.5 "LENS -CUTTING HEAD QUICK CHANGE FACILITY CONTROL -AUTOMATIC SWITCH-OFF -CONTROL SINUMERIK 840 D -CONTOURLAS -BNC / RJ45 NETWORK CONNECTOR -3.5 "FLOPPY DISK DRIVE SECURITY -MULTI-CHAMBER EXHAUST SYSTEM -COMPACT DUST COLLECTOR PROGRAMMING -SHOP FLOOR PROGRAMMING LITE TOPS 100 ADVANCED MACHINE EQUIPMENT -AUTOMATIC PALLET CHANGER -CATEYE TECHNICAL DATA SUBJECT TO CHANGE - SUBJECT TO PRIOR SALE THE OPERATING HOURS FOR DELIVERY OF THE MACHINE MAY DIFFER FROM THE HOURS RECORDED IN THE OFFER
Vendedor: mteg GmbH
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 7402; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 227 ; GROSS WEIGHT [KG]: 7402; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 227
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-the machine can be visited at us like in the camp.

manufacturer: binmak
country of origin: turkey
2019.
work range approx. 1050 x 4, 0 mm
round rollers mind up to 4 mm up to 5 mm possible before bending.
the rollers are hardened
to the conical rollers
with foot pedal
electrically approx. 2.2 kw
weight approx. 895 kg
roll diameter: 110 mm
engine with cast iron housing
side swing-out top roller
main motor with brake
with wheel up and down moving behind and front roll,
separate from the machine, mobile control panel and foot pedal
emergency stop THE MACHINE CAN BE VISITED AT US LIKE IN THE CAMP. MANUFACTURER: BINMAK COUNTRY OF ORIGIN: TURKEY 2019. WORK RANGE APPROX. 1050 X 4, 0 MM ROUND ROLLERS MIND UP TO 4 MM UP TO 5 MM POSSIBLE BEFORE BENDING. THE ROLLERS ARE HARDENED TO THE CONICAL ROLLERS WITH FOOT PEDAL ELECTRICALLY APPROX. 2.2 KW WEIGHT APPROX. 895 KG ROLL DIAMETER: 110 MM ENGINE WITH CAST IRON HOUSING SIDE SWING-OUT TOP ROLLER MAIN MOTOR WITH BRAKE WITH WHEEL UP AND DOWN MOVING BEHIND AND FRONT ROLL, SEPARATE FROM THE MACHINE, MOBILE CONTROL PANEL AND FOOT PEDAL EMERGENCY STOP
Vendedor: Hagen Busch Maschinenhandel
Año de construcción: usado
Precio: 15.900 €
Ubicación: Land-; gross weight [kg]: 7450; rear tyres remaining: 50; front tyres remaining: 50; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 7450; REAR TYRES REMAINING: 50; FRONT TYRES REMAINING: 50; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)