41 ofertas

Año de construcción: usado
Ubicación: Land-filling line for csd and beer in pet bottles krones 4800 bph 
 
this pet line was installed in 2003 by krones, and is still in use until q2 of 2019. it has been filling beer and carbonated soft drinks in 1.0 to 2.5 liter bottles. the line is still installed and powered and can be dry tested. the blow molder needs thorough refurbishment, all other equipment are in good condition. the secondary packer has been used in shrink wrapping only, but it can be adapted for tray packing also. 
 
main technical data: 
 
manufacturer: 	krones (kosme), smi 
year: 	2003 
capacity: 	4000 bph, 1.0 ltr
	4600 bph, 1.5 ltr
	4000 bph, 2.0 and 2.5 ltr
neck format: 	pco 1810 long neck, 28 mm
operating hours: 	50 655 hrs 
control plc: 	siemens s7
 
main equipment: 
blow molder: 	kosme ksb 4000 serial no 4d117
flash pasteurizer: 	fisher eurocol 40 cgr, 60-220 hl/h, 16 bar, sn 27434 
filler: 	krones mecafill, tk-1440 vkp-pet 1.440-40-113 with 40 valves, 
k-121-756
rinser: 	krones variojet variojet 1.440-40-13, 40 nozzles, k-563-359
level inspector: 	stratec, toshiba d 0811 tubes  
labeler: 	krones contiroll 600-10, opp wrap-around label, hot melt glue 
data coder: 	domino 
secondary packer: 	smi lsk 30 t, 35 tact/h, shrink wrap and tray option, sn 8643 
 
 FILLING LINE FOR CSD AND BEER IN PET BOTTLES KRONES 4800 BPH THIS PET LINE WAS INSTALLED IN 2003 BY KRONES, AND IS STILL IN USE UNTIL Q2 OF 2019. IT HAS BEEN FILLING BEER AND CARBONATED SOFT DRINKS IN 1.0 TO 2.5 LITER BOTTLES. THE LINE IS STILL INSTALLED AND POWERED AND CAN BE DRY TESTED. THE BLOW MOLDER NEEDS THOROUGH REFURBISHMENT, ALL OTHER EQUIPMENT ARE IN GOOD CONDITION. THE SECONDARY PACKER HAS BEEN USED IN SHRINK WRAPPING ONLY, BUT IT CAN BE ADAPTED FOR TRAY PACKING ALSO. MAIN TECHNICAL DATA: MANUFACTURER: KRONES (KOSME), SMI YEAR: 2003 CAPACITY: 4000 BPH, 1.0 LTR 4600 BPH, 1.5 LTR 4000 BPH, 2.0 AND 2.5 LTR NECK FORMAT: PCO 1810 LONG NECK, 28 MM OPERATING HOURS: 50 655 HRS CONTROL PLC: SIEMENS S7 MAIN EQUIPMENT: BLOW MOLDER: KOSME KSB 4000 SERIAL NO 4D117 FLASH PASTEURIZER: FISHER EUROCOL 40 CGR, 60-220 HL/H, 16 BAR, SN 27434 FILLER: KRONES MECAFILL, TK-1440 VKP-PET 1.440-40-113 WITH 40 VALVES, K-121-756 RINSER: KRONES VARIOJET VARIOJET 1.440-40-13, 40 NOZZLES, K-563-359 LEVEL INSPECTOR: STRATEC, TOSHIBA D 0811 TUBES LABELER: KRONES CONTIROLL 600-10, OPP WRAP-AROUND LABEL, HOT MELT GLUE DATA CODER: DOMINO SECONDARY PACKER: SMI LSK 30 T, 35 TACT/H, SHRINK WRAP AND TRAY OPTION, SN 8643
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 15.800 €
Ubicación: Land-weight approx.: 22500 kg<br/>dimensions (l x w x h) approx.: 5820 x 6900 x 4150 mm<br/>description: 2 pallet machine, pallets 1000 x 1000 mm, pallet load 2000 kg, traverses x / y / z 2000/1120/1250 mm, 4th axle (ncrt), rapid traverse 12 m / min, spindle fixture mas bt-50, spindle speed 20-4500 rpm, 90 tools in warehouse, control system tosnuc 60 mb, 2 additional machine pallets, without clamoing angle, total fits in 2x 40 feet ot containers WEIGHT APPROX.: 22500 KG
DIMENSIONS (L X W X H) APPROX.: 5820 X 6900 X 4150 MM
DESCRIPTION: 2 PALLET MACHINE, PALLETS 1000 X 1000 MM, PALLET LOAD 2000 KG, TRAVERSES X / Y / Z 2000/1120/1250 MM, 4TH AXLE (NCRT), RAPID TRAVERSE 12 M / MIN, SPINDLE FIXTURE MAS BT-50, SPINDLE SPEED 20-4500 RPM, 90 TOOLS IN WAREHOUSE, CONTROL SYSTEM TOSNUC 60 MB, 2 ADDITIONAL MACHINE PALLETS, WITHOUT CLAMOING ANGLE, TOTAL FITS IN 2X 40 FEET OT CONTAINERS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-60ton electric arc furnace and continuous casting machine
(billet production plant for rebar)

1.   60ton eaf
make:nikko (japan)
year:1994
revamping year: 2004/2009
nominal capacity:  60 ton/heat
average charge(scrap): 64.5 ton/heat
type: ac 3phase
tapping type: spout 
shell dia: 5,600 mm  
shell height: 4,860 mm
arm material:aluminum(nikko,japan,2010)
pcd: 1,250 mm
electrode: 20 inch(500mm)
transformer: 52/62.4 mva(kitashiba,japan, 1996)
primary voltage: 22,000 v

 2.   l/f(ladle furnace)
make: kumsoo (korea)
year:2006
nominal capacity: avg. 60 ton/heat
type: ac 3 phase
transformer:15 mva(toshiba,japan,1979,2008 repair)
primary voltage: 22,000 v

3. ccm
make: concast (swiss) /mhises (japan)/ m.tec (korea)
year:1995
revamping year:2002/2008
machine radius: 9,000 mm
strand quantity :4 ea 
casting speed(m/min): 2.4 ~ 3.6

billet  size
 ? 130×130mm, ? 170×170mm
 (? 120×120mm~? 170×170mm) 
 tundish capacity: 8 ton 
 tundish quantity: 8 ea
 
4. dust collector
5.oxygen generating facilities

 --------------------------------------------------

bmj korea co.,ltd.
director: jongduk baek
mobile: +82-10-7499-2567
e-mail: whitebelvt@gmail 
address: 4f, 27-8, gukjegeumyung-ro 8-gil,
yeongdeungpo-gu, seoul, korea


 60TON ELECTRIC ARC FURNACE AND CONTINUOUS CASTING MACHINE (BILLET PRODUCTION PLANT FOR REBAR) 1. 60TON EAF MAKE:NIKKO (JAPAN) YEAR:1994 REVAMPING YEAR: 2004/2009 NOMINAL CAPACITY: 60 TON/HEAT AVERAGE CHARGE(SCRAP): 64.5 TON/HEAT TYPE: AC 3PHASE TAPPING TYPE: SPOUT SHELL DIA: 5,600 MM SHELL HEIGHT: 4,860 MM ARM MATERIAL:ALUMINUM(NIKKO,JAPAN,2010) PCD: 1,250 MM ELECTRODE: 20 INCH(500MM) TRANSFORMER: 52/62.4 MVA(KITASHIBA,JAPAN, 1996) PRIMARY VOLTAGE: 22,000 V 2. L/F(LADLE FURNACE) MAKE: KUMSOO (KOREA) YEAR:2006 NOMINAL CAPACITY: AVG. 60 TON/HEAT TYPE: AC 3 PHASE TRANSFORMER:15 MVA(TOSHIBA,JAPAN,1979,2008 REPAIR) PRIMARY VOLTAGE: 22,000 V 3. CCM MAKE: CONCAST (SWISS) /MHISES (JAPAN)/ M.TEC (KOREA) YEAR:1995 REVAMPING YEAR:2002/2008 MACHINE RADIUS: 9,000 MM STRAND QUANTITY :4 EA CASTING SPEED(M/MIN): 2.4 ~ 3.6 BILLET SIZE ? 130×130MM, ? 170×170MM (? 120×120MM~? 170×170MM) TUNDISH CAPACITY: 8 TON TUNDISH QUANTITY: 8 EA 4. DUST COLLECTOR 5.OXYGEN GENERATING FACILITIES -------------------------------------------------- BMJ KOREA CO.,LTD. DIRECTOR: JONGDUK BAEK MOBILE: +82-10-7499-2567 E-MAIL: WHITEBELVT@GMAIL ADDRESS: 4F, 27-8, GUKJEGEUMYUNG-RO 8-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: used machinery auction RESALE 150 €
Ubicación: Land-weight approx.: 15 kg<br/>dimensions (l x w x h) approx.: 300 x 800 x 300 mm<br/>description: 2 inverter toshiba vfs96-2015pl-wp and 1 800 va transformer. see photo WEIGHT APPROX.: 15 KG
DIMENSIONS (L X W X H) APPROX.: 300 X 800 X 300 MM
DESCRIPTION: 2 INVERTER TOSHIBA VFS96-2015PL-WP AND 1 800 VA TRANSFORMER. SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-60ton electric arc furnace and continuous casting machine
(billet production plant for rebar)

1.   60ton eaf
make:nikko (japan)
year:1994
revamping year: 2004/2009
nominal capacity:  60 ton/heat
average charge(scrap): 64.5 ton/heat
type: ac 3phase
tapping type: spout 
shell dia: 5,600 mm  
shell height: 4,860 mm
arm material:aluminum(nikko,japan,2010)
pcd: 1,250 mm
electrode: 20 inch(500mm)
transformer: 52/62.4 mva(kitashiba,japan, 1996)
primary voltage: 22,000 v

 2.   l/f(ladle furnace)
make: kumsoo (korea)
year:2006
nominal capacity: avg. 60 ton/heat
type: ac 3 phase
transformer:15 mva(toshiba,japan,1979,2008 repair)
primary voltage: 22,000 v

3. ccm
make: concast (swiss) /mhises (japan)/ m.tec (korea)
year:1995
revamping year:2002/2008
machine radius: 9,000 mm
strand quantity :4 ea 
casting speed(m/min): 2.4 ~ 3.6

billet  size
 ? 130×130mm, ? 170×170mm
 (? 120×120mm~? 170×170mm) 
 tundish capacity: 8 ton 
 tundish quantity: 8 ea
 
4. dust collector
5.oxygen generating facilities

 --------------------------------------------------

bmj korea co.,ltd.
director: jongduk baek
mobile: +82-10-7499-2567
e-mail: whitebelvt@gmail 
address: 4f, 27-8, gukjegeumyung-ro 8-gil,
yeongdeungpo-gu, seoul, korea




 60TON ELECTRIC ARC FURNACE AND CONTINUOUS CASTING MACHINE (BILLET PRODUCTION PLANT FOR REBAR) 1. 60TON EAF MAKE:NIKKO (JAPAN) YEAR:1994 REVAMPING YEAR: 2004/2009 NOMINAL CAPACITY: 60 TON/HEAT AVERAGE CHARGE(SCRAP): 64.5 TON/HEAT TYPE: AC 3PHASE TAPPING TYPE: SPOUT SHELL DIA: 5,600 MM SHELL HEIGHT: 4,860 MM ARM MATERIAL:ALUMINUM(NIKKO,JAPAN,2010) PCD: 1,250 MM ELECTRODE: 20 INCH(500MM) TRANSFORMER: 52/62.4 MVA(KITASHIBA,JAPAN, 1996) PRIMARY VOLTAGE: 22,000 V 2. L/F(LADLE FURNACE) MAKE: KUMSOO (KOREA) YEAR:2006 NOMINAL CAPACITY: AVG. 60 TON/HEAT TYPE: AC 3 PHASE TRANSFORMER:15 MVA(TOSHIBA,JAPAN,1979,2008 REPAIR) PRIMARY VOLTAGE: 22,000 V 3. CCM MAKE: CONCAST (SWISS) /MHISES (JAPAN)/ M.TEC (KOREA) YEAR:1995 REVAMPING YEAR:2002/2008 MACHINE RADIUS: 9,000 MM STRAND QUANTITY :4 EA CASTING SPEED(M/MIN): 2.4 ~ 3.6 BILLET SIZE ? 130×130MM, ? 170×170MM (? 120×120MM~? 170×170MM) TUNDISH CAPACITY: 8 TON TUNDISH QUANTITY: 8 EA 4. DUST COLLECTOR 5.OXYGEN GENERATING FACILITIES -------------------------------------------------- BMJ KOREA CO.,LTD. DIRECTOR: JONGDUK BAEK MOBILE: +82-10-7499-2567 E-MAIL: WHITEBELVT@GMAIL ADDRESS: 4F, 27-8, GUKJEGEUMYUNG-RO 8-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-this multi-lot item includes:

1. scholz autoclave 
	- internal diameter: 3300mm
	- internal length: 10200mm
	- capacity 1120l
	- pressure: 15 bar
	- year: 1978
	- serial: 33189


3. automated bogie loading system
	- pneumatic lowering drawbridge
	- keevalite hydraulic system with motor 
	- width: 1500mm
	- length: 6000mm

4. steam, air & water regulation systems
	- auma water regulator/ valve actuator 
	- auma steam regulator/ valve actuator 
	- eckardt compressed air vent system
	- eckardt compressed air intake system

5. control cubicles with toshiba e910 control panel display

6. morrow electrics control panel for autoclave door & loading

7. available but not included: matching baltimore aircoil cooling tower 

8. available but not included: matching robert jenkins air receiver
9. available but not included: matching steam plant THIS MULTI-LOT ITEM INCLUDES: 1. SCHOLZ AUTOCLAVE - INTERNAL DIAMETER: 3300MM - INTERNAL LENGTH: 10200MM - CAPACITY 1120L - PRESSURE: 15 BAR - YEAR: 1978 - SERIAL: 33189 3. AUTOMATED BOGIE LOADING SYSTEM - PNEUMATIC LOWERING DRAWBRIDGE - KEEVALITE HYDRAULIC SYSTEM WITH MOTOR - WIDTH: 1500MM - LENGTH: 6000MM 4. STEAM, AIR & WATER REGULATION SYSTEMS - AUMA WATER REGULATOR/ VALVE ACTUATOR - AUMA STEAM REGULATOR/ VALVE ACTUATOR - ECKARDT COMPRESSED AIR VENT SYSTEM - ECKARDT COMPRESSED AIR INTAKE SYSTEM 5. CONTROL CUBICLES WITH TOSHIBA E910 CONTROL PANEL DISPLAY 6. MORROW ELECTRICS CONTROL PANEL FOR AUTOCLAVE DOOR & LOADING 7. AVAILABLE BUT NOT INCLUDED: MATCHING BALTIMORE AIRCOIL COOLING TOWER 8. AVAILABLE BUT NOT INCLUDED: MATCHING ROBERT JENKINS AIR RECEIVER 9. AVAILABLE BUT NOT INCLUDED: MATCHING STEAM PLANT
Vendedor: PostIndustry
Año de construcción: usado
Ubicación: Land-60ton electric arc furnace and continuous casting machine
(billet production plant for rebar)

1.   60ton eaf
make:nikko (japan)
year:1994
revamping year: 2004/2009
nominal capacity:  60 ton/heat
average charge(scrap): 64.5 ton/heat
type: ac 3phase
tapping type: spout 
shell dia: 5,600 mm  
shell height: 4,860 mm
arm material:aluminum(nikko,japan,2010)
pcd: 1,250 mm
electrode: 20 inch(500mm)
transformer: 52/62.4 mva(kitashiba,japan, 1996)
primary voltage: 22,000 v

 2.   l/f(ladle furnace)
make: kumsoo (korea)
year:2006
nominal capacity: avg. 60 ton/heat
type: ac 3 phase
transformer:15 mva(toshiba,japan,1979,2008 repair)
primary voltage: 22,000 v

3. ccm
make: concast (swiss) /mhises (japan)/ m.tec (korea)
year:1995
revamping year:2002/2008
machine radius: 9,000 mm
strand quantity :4 ea 
casting speed(m/min): 2.4 ~ 3.6

billet  size
 ? 130×130mm, ? 170×170mm
 (? 120×120mm~? 170×170mm) 
 tundish capacity: 8 ton 
 tundish quantity: 8 ea
 
4. dust collector
5.oxygen generating facilities

 --------------------------------------------------

bmj korea co.,ltd.
director: jongduk baek
mobile: +82-10-7499-2567
e-mail: whitebelvt@gmail 
address: 4f, 27-8, gukjegeumyung-ro 8-gil,
yeongdeungpo-gu, seoul, korea




 60TON ELECTRIC ARC FURNACE AND CONTINUOUS CASTING MACHINE (BILLET PRODUCTION PLANT FOR REBAR) 1. 60TON EAF MAKE:NIKKO (JAPAN) YEAR:1994 REVAMPING YEAR: 2004/2009 NOMINAL CAPACITY: 60 TON/HEAT AVERAGE CHARGE(SCRAP): 64.5 TON/HEAT TYPE: AC 3PHASE TAPPING TYPE: SPOUT SHELL DIA: 5,600 MM SHELL HEIGHT: 4,860 MM ARM MATERIAL:ALUMINUM(NIKKO,JAPAN,2010) PCD: 1,250 MM ELECTRODE: 20 INCH(500MM) TRANSFORMER: 52/62.4 MVA(KITASHIBA,JAPAN, 1996) PRIMARY VOLTAGE: 22,000 V 2. L/F(LADLE FURNACE) MAKE: KUMSOO (KOREA) YEAR:2006 NOMINAL CAPACITY: AVG. 60 TON/HEAT TYPE: AC 3 PHASE TRANSFORMER:15 MVA(TOSHIBA,JAPAN,1979,2008 REPAIR) PRIMARY VOLTAGE: 22,000 V 3. CCM MAKE: CONCAST (SWISS) /MHISES (JAPAN)/ M.TEC (KOREA) YEAR:1995 REVAMPING YEAR:2002/2008 MACHINE RADIUS: 9,000 MM STRAND QUANTITY :4 EA CASTING SPEED(M/MIN): 2.4 ~ 3.6 BILLET SIZE ? 130×130MM, ? 170×170MM (? 120×120MM~? 170×170MM) TUNDISH CAPACITY: 8 TON TUNDISH QUANTITY: 8 EA 4. DUST COLLECTOR 5.OXYGEN GENERATING FACILITIES -------------------------------------------------- BMJ KOREA CO.,LTD. DIRECTOR: JONGDUK BAEK MOBILE: +82-10-7499-2567 E-MAIL: WHITEBELVT@GMAIL ADDRESS: 4F, 27-8, GUKJEGEUMYUNG-RO 8-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 55 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-60ton electric arc furnace and continuous casting machine
(billet production plant for rebar)

1.   60ton eaf
make:nikko (japan)
year:1994
revamping year: 2004/2009
nominal capacity:  60 ton/heat
average charge(scrap): 64.5 ton/heat
type: ac 3phase
tapping type: spout 
shell dia: 5,600 mm  
shell height: 4,860 mm
arm material:aluminum(nikko,japan,2010)
pcd: 1,250 mm
electrode: 20 inch(500mm)
transformer: 52/62.4 mva(kitashiba,japan, 1996)
primary voltage: 22,000 v

 2.   l/f(ladle furnace)
make: kumsoo (korea)
year:2006
nominal capacity: avg. 60 ton/heat
type: ac 3 phase
transformer:15 mva(toshiba,japan,1979,2008 repair)
primary voltage: 22,000 v

3. ccm
make: concast (swiss) /mhises (japan)/ m.tec (korea)
year:1995
revamping year:2002/2008
machine radius: 9,000 mm
strand quantity :4 ea 
casting speed(m/min): 2.4 ~ 3.6

billet  size
 ? 130×130mm, ? 170×170mm
 (? 120×120mm~? 170×170mm) 
 tundish capacity: 8 ton 
 tundish quantity: 8 ea
 
4. dust collector
5.oxygen generating facilities

 --------------------------------------------------

bmj korea co.,ltd.
director: jongduk baek
mobile: +82-10-7499-2567
e-mail: whitebelvt@gmail 
address: 4f, 27-8, gukjegeumyung-ro 8-gil,
yeongdeungpo-gu, seoul, korea




 60TON ELECTRIC ARC FURNACE AND CONTINUOUS CASTING MACHINE (BILLET PRODUCTION PLANT FOR REBAR) 1. 60TON EAF MAKE:NIKKO (JAPAN) YEAR:1994 REVAMPING YEAR: 2004/2009 NOMINAL CAPACITY: 60 TON/HEAT AVERAGE CHARGE(SCRAP): 64.5 TON/HEAT TYPE: AC 3PHASE TAPPING TYPE: SPOUT SHELL DIA: 5,600 MM SHELL HEIGHT: 4,860 MM ARM MATERIAL:ALUMINUM(NIKKO,JAPAN,2010) PCD: 1,250 MM ELECTRODE: 20 INCH(500MM) TRANSFORMER: 52/62.4 MVA(KITASHIBA,JAPAN, 1996) PRIMARY VOLTAGE: 22,000 V 2. L/F(LADLE FURNACE) MAKE: KUMSOO (KOREA) YEAR:2006 NOMINAL CAPACITY: AVG. 60 TON/HEAT TYPE: AC 3 PHASE TRANSFORMER:15 MVA(TOSHIBA,JAPAN,1979,2008 REPAIR) PRIMARY VOLTAGE: 22,000 V 3. CCM MAKE: CONCAST (SWISS) /MHISES (JAPAN)/ M.TEC (KOREA) YEAR:1995 REVAMPING YEAR:2002/2008 MACHINE RADIUS: 9,000 MM STRAND QUANTITY :4 EA CASTING SPEED(M/MIN): 2.4 ~ 3.6 BILLET SIZE ? 130×130MM, ? 170×170MM (? 120×120MM~? 170×170MM) TUNDISH CAPACITY: 8 TON TUNDISH QUANTITY: 8 EA 4. DUST COLLECTOR 5.OXYGEN GENERATING FACILITIES -------------------------------------------------- BMJ KOREA CO.,LTD. DIRECTOR: JONGDUK BAEK MOBILE: +82-10-7499-2567 E-MAIL: WHITEBELVT@GMAIL ADDRESS: 4F, 27-8, GUKJEGEUMYUNG-RO 8-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 250 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-is2500dfb-315b (made in japan)

clapping force : 2500 t
screw diameter : 180 mm
screw simbol : b
machine weight : 157 t

with robot, qdc IS2500DFB-315B (MADE IN JAPAN) CLAPPING FORCE : 2500 T SCREW DIAMETER : 180 MM SCREW SIMBOL : B MACHINE WEIGHT : 157 T WITH ROBOT, QDC
Vendedor: hyundai machinery
Año de construcción: usado
Ubicación: Land-manufacturer: toshiba, type: ex 40-4mcrd2, modell: programmmable controller, seriennummer: 94n-2025, MANUFACTURER: TOSHIBA, TYPE: EX 40-4MCRD2, MODELL: PROGRAMMMABLE CONTROLLER, SERIENNUMMER: 94N-2025,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Precio: 200 €
Ubicación: Land-toshiba, pc-25m, 2.5mhz.

more info? write us
2hand4sale.de
say hello to TOSHIBA, PC-25M, 2.5MHZ. MORE INFO? WRITE US 2HAND4SALE.DE SAY HELLO TO
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Ubicación: Land-manufacturer: toshiba, type: ex 40 plus, modell: ex 40 x 4mcrd5, seriennummer: 9402025, MANUFACTURER: TOSHIBA, TYPE: EX 40 PLUS, MODELL: EX 40 X 4MCRD5, SERIENNUMMER: 9402025,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-toshiba aquillion 64 slice ct
year of construction: 2006
tube: cxb 750/3a
sw version: v3. 35gr006
builder: high voltage generator cxxg-012a

more information on demand TOSHIBA AQUILLION 64 SLICE CT YEAR OF CONSTRUCTION: 2006 TUBE: CXB 750/3A SW VERSION: V3. 35GR006 BUILDER: HIGH VOLTAGE GENERATOR CXXG-012A MORE INFORMATION ON DEMAND
Vendedor: ums - used medical systems UG
Año de construcción: usado
Ubicación: Land-manufacturer: toshiba, type: programmable controller, modell: ex20-1mcrb5, seriennummer: 5602167, MANUFACTURER: TOSHIBA, TYPE: PROGRAMMABLE CONTROLLER, MODELL: EX20-1MCRB5, SERIENNUMMER: 5602167,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-ct toshiba aquilion 16 CT TOSHIBA AQUILION 16
Vendedor: MSI Medical Service International
Año de construcción: usado
Ubicación: Land-<br>spindle diameter (mm) 180<br>table length (mm) <br>table width (mm) <br>cross x (mm) <br>vertical y (mm)  <br>pos atc <br>number of pallets <br>
SPINDLE DIAMETER (MM) 180
TABLE LENGTH (MM)
TABLE WIDTH (MM)
CROSS X (MM)
VERTICAL Y (MM)
POS ATC
NUMBER OF PALLETS
Vendedor: Muller Machines SA
Año de construcción: usado
Ubicación: Land-used toshiba horisontal boring machine bsp 19/13
machine for retrofit

x-axis:           6000 mm
y-axis:           3000 mm
z-axis:           1500 mm
spindle diameter: 190 mm
table:            2000 x 3200 mm
max. loading:     20.000 kg

the machine is ready for electrical retrofit, alle guideways is grinded USED TOSHIBA HORISONTAL BORING MACHINE BSP 19/13 MACHINE FOR RETROFIT X-AXIS: 6000 MM Y-AXIS: 3000 MM Z-AXIS: 1500 MM SPINDLE DIAMETER: 190 MM TABLE: 2000 X 3200 MM MAX. LOADING: 20.000 KG THE MACHINE IS READY FOR ELECTRICAL RETROFIT, ALLE GUIDEWAYS IS GRINDED
Vendedor: S. H. Vaerktojsmaskiner ApS
Año de construcción: usado
Precio: 1.200 €
Ubicación: Land-color ultrasound system with videoprinter and 3.75 mhz convex probe and 8 mhz linear probe

features

b-mode and color image progressing
    * velocity range processing *.
    * auto focus *.
    * palm controller *.
    dual trackball imaging modes
    b-mode
    m-mode
    pw doppler
    * color flow standard features *.
    12 inch color monitor
    color angio
    digital image filter
    triple frequency dynamic beam control
    * real-time triplex mode *.
    real-time pan/expand
    * independent steering *.
    * ob advisor *.
    image memory

specifications
cart based 1
clinical applications obgyn
color flow mapping 1
doppler modes pw doppler

height of 51.2 in
12 image display in
imaging mode b/m
length 33.5 in
weight 265 lbs
width 18.1 in 

 COLOR ULTRASOUND SYSTEM WITH VIDEOPRINTER AND 3.75 MHZ CONVEX PROBE AND 8 MHZ LINEAR PROBE FEATURES B-MODE AND COLOR IMAGE PROGRESSING * VELOCITY RANGE PROCESSING *. * AUTO FOCUS *. * PALM CONTROLLER *. DUAL TRACKBALL IMAGING MODES B-MODE M-MODE PW DOPPLER * COLOR FLOW STANDARD FEATURES *. 12 INCH COLOR MONITOR COLOR ANGIO DIGITAL IMAGE FILTER TRIPLE FREQUENCY DYNAMIC BEAM CONTROL * REAL-TIME TRIPLEX MODE *. REAL-TIME PAN/EXPAND * INDEPENDENT STEERING *. * OB ADVISOR *. IMAGE MEMORY SPECIFICATIONS CART BASED 1 CLINICAL APPLICATIONS OBGYN COLOR FLOW MAPPING 1 DOPPLER MODES PW DOPPLER HEIGHT OF 51.2 IN 12 IMAGE DISPLAY IN IMAGING MODE B/M LENGTH 33.5 IN WEIGHT 265 LBS WIDTH 18.1 IN
Vendedor: Wilbert Medizintechnik
Año de construcción: usado
Ubicación: Land-toshiba is450fa3
year of production 1994
shutter force 450t
screw diameter 70mm
chamber volume 1110g / ps
spacing between posts 810x810mm
min. height of mold 380mm
max. mold height 1380mm
euromap 12
robot star act tws1100b TOSHIBA IS450FA3 YEAR OF PRODUCTION 1994 SHUTTER FORCE 450T SCREW DIAMETER 70MM CHAMBER VOLUME 1110G / PS SPACING BETWEEN POSTS 810X810MM MIN. HEIGHT OF MOLD 380MM MAX. MOLD HEIGHT 1380MM EUROMAP 12 ROBOT STAR ACT TWS1100B
Vendedor: BASTA machinery
Año de construcción: usado
Ubicación: Land-qty. 1 second-hand paper mill – already dismantled!
mfc.:	ihi, johnson foils, mitsubishi-beloit, honeywell, metso		built:	1980
revision:	2006. 5. 2	revision of hood ventilation specification						
                2015. 6. 29	revision of rebuild item
		2015. 7. 1	revision of description, deletion of part drawing
		2016. 3. 23	addition of poly disc filter specification
		2016. 4. 19	revision of operating data	
paper width:	5300 mm	reel web width:  4,800 mm		grammage:	45 – 120 gsm	
operation speed:	1100 m/min.		max. production: 	600 ton/day (on reel)
head box	hydraulic type (converflo)	slice width: 5,150mm
wire 		(pf gap): twin wire type	rebuild of forming zone by johnson foils in 2004
press		tri-nip		replaced of center roll (ceramic cover) by metso in 2005
replaced of steam box by honeywell in 2003
dryer		4 group (42 cylinder)		1-2 single / 3-4 double
installation of web stabilizer by ev group in 2007 stationary syphon
rebuild by deublin in 2006
calender	snc - 1 stack / 1 nip		rebuild by metso in 2003
reel		pope
winder	type:	two-drum	speed: 2,300 m/min	rebuild by mhi in 2003
replaced of slitting station by ape in 2006
drive		sectional, dc motor (toshiba:japan)	speed-up in 2005, 2007
vacuum	water ring
control system	qcs:	davinci
changed of scanner by honeywell in 2003 basis weight, moisture, caliper, 
hole detector: 	new installation by isravision in 2006
dimension product of paper: width - 1,576 mm    diameter - max. 1,200 mm after winder
paper grade: 	printing & writing paper/liner /kraft/newsprint
 QTY. 1 SECOND-HAND PAPER MILL – ALREADY DISMANTLED! MFC.: IHI, JOHNSON FOILS, MITSUBISHI-BELOIT, HONEYWELL, METSO BUILT: 1980 REVISION: 2006. 5. 2 REVISION OF HOOD VENTILATION SPECIFICATION 2015. 6. 29 REVISION OF REBUILD ITEM 2015. 7. 1 REVISION OF DESCRIPTION, DELETION OF PART DRAWING 2016. 3. 23 ADDITION OF POLY DISC FILTER SPECIFICATION 2016. 4. 19 REVISION OF OPERATING DATA PAPER WIDTH: 5300 MM REEL WEB WIDTH: 4,800 MM GRAMMAGE: 45 – 120 GSM OPERATION SPEED: 1100 M/MIN. MAX. PRODUCTION: 600 TON/DAY (ON REEL) HEAD BOX HYDRAULIC TYPE (CONVERFLO) SLICE WIDTH: 5,150MM WIRE (PF GAP): TWIN WIRE TYPE REBUILD OF FORMING ZONE BY JOHNSON FOILS IN 2004 PRESS TRI-NIP REPLACED OF CENTER ROLL (CERAMIC COVER) BY METSO IN 2005 REPLACED OF STEAM BOX BY HONEYWELL IN 2003 DRYER 4 GROUP (42 CYLINDER) 1-2 SINGLE / 3-4 DOUBLE INSTALLATION OF WEB STABILIZER BY EV GROUP IN 2007 STATIONARY SYPHON REBUILD BY DEUBLIN IN 2006 CALENDER SNC - 1 STACK / 1 NIP REBUILD BY METSO IN 2003 REEL POPE WINDER TYPE: TWO-DRUM SPEED: 2,300 M/MIN REBUILD BY MHI IN 2003 REPLACED OF SLITTING STATION BY APE IN 2006 DRIVE SECTIONAL, DC MOTOR (TOSHIBA:JAPAN) SPEED-UP IN 2005, 2007 VACUUM WATER RING CONTROL SYSTEM QCS: DAVINCI CHANGED OF SCANNER BY HONEYWELL IN 2003 BASIS WEIGHT, MOISTURE, CALIPER, HOLE DETECTOR: NEW INSTALLATION BY ISRAVISION IN 2006 DIMENSION PRODUCT OF PAPER: WIDTH - 1,576 MM DIAMETER - MAX. 1,200 MM AFTER WINDER PAPER GRADE: PRINTING & WRITING PAPER/LINER /KRAFT/NEWSPRINT
Vendedor: MET-TECH GMBH
Año de construcción: usado
Ubicación: Land-overview
brand: toshiba
model: is 80 epn 2a
application type: injection moulding 
machine type: injection moulding machines 
availability: immediately
production year: 1988
location: india
origin country: japan
production hours: 68000

general data
measurements width: 3430 mm 
measurements depth: 1140 mm 
measurements height: 1680 mm 
machine weight: 4400 kg

injection unit
screw diameter: 32 mm
stroke volume: 2390 cm³
injection pressure: 144 bar 
plasticising rate max: 50 g/s ps

clamping unit
clamping force: 8000

media
main electronic connection: 400 v 
power consumption: 15 kva

see full technical specifications of this machine at:
abc://bit.ly/2svimoj OVERVIEW BRAND: TOSHIBA MODEL: IS 80 EPN 2A APPLICATION TYPE: INJECTION MOULDING MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 1988 LOCATION: INDIA ORIGIN COUNTRY: JAPAN PRODUCTION HOURS: 68000 GENERAL DATA MEASUREMENTS WIDTH: 3430 MM MEASUREMENTS DEPTH: 1140 MM MEASUREMENTS HEIGHT: 1680 MM MACHINE WEIGHT: 4400 KG INJECTION UNIT SCREW DIAMETER: 32 MM STROKE VOLUME: 2390 CM³ INJECTION PRESSURE: 144 BAR PLASTICISING RATE MAX: 50 G/S PS CLAMPING UNIT CLAMPING FORCE: 8000 MEDIA MAIN ELECTRONIC CONNECTION: 400 V POWER CONSUMPTION: 15 KVA SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2SVIMOJ
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-overview
brand: toshiba
model: is170fa-5b
application type: injection moulding 
machine type: injection moulding machines 
availability: immediately
production year: 1991
location: india
origin country: japan
production hours: 60000

general data
measurements width: 5700 mm
 measurements depth: 1200 mm 
measurements height: 1800 mm 
machine weight: 6800 kg

control unit
brand: devansi
cnc main language: english 
cnc language customizable: yes

injection unit
screw diameter: 50 mm 
shot weight: 490 g/ps
injection pressure: 2060 bar

clamping unit
clamping force: 170 kn

media
main electronic connection: 400 v 
power consumption: 22 kva

see full technical specifications of this machine at:
abc://bit.ly/2yynvik OVERVIEW BRAND: TOSHIBA MODEL: IS170FA-5B APPLICATION TYPE: INJECTION MOULDING MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 1991 LOCATION: INDIA ORIGIN COUNTRY: JAPAN PRODUCTION HOURS: 60000 GENERAL DATA MEASUREMENTS WIDTH: 5700 MM MEASUREMENTS DEPTH: 1200 MM MEASUREMENTS HEIGHT: 1800 MM MACHINE WEIGHT: 6800 KG CONTROL UNIT BRAND: DEVANSI CNC MAIN LANGUAGE: ENGLISH CNC LANGUAGE CUSTOMIZABLE: YES INJECTION UNIT SCREW DIAMETER: 50 MM SHOT WEIGHT: 490 G/PS INJECTION PRESSURE: 2060 BAR CLAMPING UNIT CLAMPING FORCE: 170 KN MEDIA MAIN ELECTRONIC CONNECTION: 400 V POWER CONSUMPTION: 22 KVA SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2YYNVIK
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-toshiba bmc80 3-axis hmc 4 axis
new 1987
cnc  tosnuc
przejazdy : 
x= 1.600, y= 1.000, z= 1.120
full b axis
number of paletts 2 st 800 x 800 mm
max weight on palet 2.000 kg
max spindelspeeds 3000 rpm
toolchanger 60 tools

probe reinshaw
measurement of a detail
tool measurement
   TOSHIBA BMC80 3-AXIS HMC 4 AXIS NEW 1987 CNC TOSNUC PRZEJAZDY : X= 1.600, Y= 1.000, Z= 1.120 FULL B AXIS NUMBER OF PALETTS 2 ST 800 X 800 MM MAX WEIGHT ON PALET 2.000 KG MAX SPINDELSPEEDS 3000 RPM TOOLCHANGER 60 TOOLS PROBE REINSHAW MEASUREMENT OF A DETAIL TOOL MEASUREMENT
Vendedor: Machines4metal
Año de construcción: usado
Ubicación: Land-yom : 1989
cnc control : fanuc 11t  
table diam. :1250 mm  
max turning diam : 1600 mm
table load: 5.000 kg
table speed: 3,2-315 o/min  
max workpiece height : 1550 mm
max turning height: 1250  mm  
beam travel: 1000 mm  
main motor: 30/37 kw  
atc 12 iso 50
weight of the machine 13 ton
 YOM : 1989 CNC CONTROL : FANUC 11T TABLE DIAM. :1250 MM MAX TURNING DIAM : 1600 MM TABLE LOAD: 5.000 KG TABLE SPEED: 3,2-315 O/MIN MAX WORKPIECE HEIGHT : 1550 MM MAX TURNING HEIGHT: 1250 MM BEAM TRAVEL: 1000 MM MAIN MOTOR: 30/37 KW ATC 12 ISO 50 WEIGHT OF THE MACHINE 13 TON
Vendedor: Machines4metal
Año de construcción: usado
Precio: 90.000 €.
Ubicación: Land-ct tube oct. 2015 CT TUBE OCT. 2015
Vendedor: Humana Ray GMBH
Año de construcción: usado
Precio: 65 €
Ubicación: Land-your original toshiba toner no. t-fc 65 e-y yellow YOUR ORIGINAL TOSHIBA TONER NO. T-FC 65 E-Y YELLOW
Vendedor: Plotter Klinik Bayer
Año de construcción: usado
Precio: 45 €
Ubicación: Land-new original toshiba toner model t-fc 35 e-m magenta  NEW ORIGINAL TOSHIBA TONER MODEL T-FC 35 E-M MAGENTA
Vendedor: Plotter Klinik Bayer
Año de construcción: usado
Precio: used machinery auction RESALE 17.500 €
Ubicación: Land-cnc horizontal table boring and milling machine; axis travel x= 2000 mm; y= 1500 mm; z= 1450 mm; w= 500 mm; spindle diameter 110 mm; spindle speed 5-235 rpm; high range 801-2500 rpm; rapid traverse 10 000 mm/ min; table working area 1600 x 1400 mm; tool atc 40; with tosniuc cnc control system; main motor 20/15 hp; ac 15/11 kw; with chip conveyor; with extra spare parts; with documentation CNC HORIZONTAL TABLE BORING AND MILLING MACHINE; AXIS TRAVEL X= 2000 MM; Y= 1500 MM; Z= 1450 MM; W= 500 MM; SPINDLE DIAMETER 110 MM; SPINDLE SPEED 5-235 RPM; HIGH RANGE 801-2500 RPM; RAPID TRAVERSE 10 000 MM/ MIN; TABLE WORKING AREA 1600 X 1400 MM; TOOL ATC 40; WITH TOSNIUC CNC CONTROL SYSTEM; MAIN MOTOR 20/15 HP; AC 15/11 KW; WITH CHIP CONVEYOR; WITH EXTRA SPARE PARTS; WITH DOCUMENTATION
Vendedor: Troostwijk Auctions
Año de construcción: usado
Precio: 980 €
Ubicación:


has been used in a packing machine previously; ready for operation .gif" alt="Land-industrial pc for installation in the front of a machine or for installation in the control cabinet.



mainboard: boser hs 6237 sbc

cpu: intel celeron 700 mhz

memory: 128 m sdram

power supply: 24v dc ups

hard disc: toshiba mk1016 gap 10 gb

display: 12\" toshiba ltm12c275a



has been used in a packing machine previously; ready for operation " style="height: 18px;"> INDUSTRIAL PC FOR INSTALLATION IN THE FRONT OF A MACHINE OR FOR INSTALLATION IN THE CONTROL CABINET.



MAINBOARD: BOSER HS 6237 SBC

CPU: INTEL CELERON 700 MHZ

MEMORY: 128 M SDRAM

POWER SUPPLY: 24V DC UPS

HARD DISC: TOSHIBA MK1016 GAP 10 GB

DISPLAY: 12\" TOSHIBA LTM12C275A



HAS BEEN USED IN A PACKING MACHINE PREVIOUSLY; READY FOR OPERATION
Vendedor: EagleTrade International
Año de construcción: usado
Precio: 1.600 €
Ubicación: Land-we provide the following to the purchase :<br>beckhoff cppc 7112-1007 beckhoff pc monitor with steinless steel keyboard<br><br><br>mainboard: boser hs6237 sbc<br><br>cpu: intel celeron<br><br>memory: 128 mb sdram<br><br>slot 1: slotplate with usb ports and dvi-port<br><br>slot 2: boser sbc-v2.2b<br><br>slot 3: slotplate with com 1 and com 2<br><br>slot 4: slotplate with lpt 1<br><br>harddisk: toshiba mk2023gas, 20gb<br><br>cd rom: teac 235hf 1.44mb a:<br><br>display: 15 zoll toshiba ltm 15c428s<br><br>monitor without touchscreen<br><br>touchpad: glidepoint on ps/2<br><br>ports: kt 7000 on ps/2<br><br>power supply: 24v dc<br><br>; second hand WE PROVIDE THE FOLLOWING TO THE PURCHASE :
BECKHOFF CPPC 7112-1007 BECKHOFF PC MONITOR WITH STEINLESS STEEL KEYBOARD


MAINBOARD: BOSER HS6237 SBC

CPU: INTEL CELERON

MEMORY: 128 MB SDRAM

SLOT 1: SLOTPLATE WITH USB PORTS AND DVI-PORT

SLOT 2: BOSER SBC-V2.2B

SLOT 3: SLOTPLATE WITH COM 1 AND COM 2

SLOT 4: SLOTPLATE WITH LPT 1

HARDDISK: TOSHIBA MK2023GAS, 20GB

CD ROM: TEAC 235HF 1.44MB A:

DISPLAY: 15 ZOLL TOSHIBA LTM 15C428S

MONITOR WITHOUT TOUCHSCREEN

TOUCHPAD: GLIDEPOINT ON PS/2

PORTS: KT 7000 ON PS/2

POWER SUPPLY: 24V DC

; SECOND HAND
Vendedor: Komplett-Konzept Verwertungs GmbH
Año de construcción: usado
Precio: 395 €
Ubicación: Land-toshiba thermal transfer printer / label printer<br><br>- label width up to 100 mm<br>- resolution up to 203 dpi<br>- printing speed up to 254 mm / sec<br>- dimensions: h 308 x l 460 mm x w 291 mm<br>- weight: approx. 18kg<br><br>modeldetail: b-sx4t-gs20-qm-r; ready for operation TOSHIBA THERMAL TRANSFER PRINTER / LABEL PRINTER

- LABEL WIDTH UP TO 100 MM
- RESOLUTION UP TO 203 DPI
- PRINTING SPEED UP TO 254 MM / SEC
- DIMENSIONS: H 308 X L 460 MM X W 291 MM
- WEIGHT: APPROX. 18KG

MODELDETAIL: B-SX4T-GS20-QM-R; READY FOR OPERATION
Vendedor: EagleTrade International
Año de construcción: usado
Ubicación: Land-scara robot toshiba th650a
 
toshiba th650a high-speed robot, arms length 650 mm, maximum capacity 10 kg

this scara robot was used only for testing and demonstration purposes, is so in fact as good as new!
clean room design, ip65

arm length
full length 650mm
first arm 300mm
second arm 350mm
range of motion
first axis ±160 °
second axis ±143 °
third axis (z-axis) 200mm (option: 400mm)
fourth axis (z-axial rotation) ±360 °
maximum speed
first axis 340 ° / s
second axis 600 ° / s
third axis (z-axis) 2050mm / s
fourth axis (z-axial rotation) 1700 ° / s
composite speed 7.52 m / s
standard cycle time
horizontal direction: 300 mm
vertical direction: 25 mm, reciprocating 0.31s 1 (with 2 kg weight)
load
maximum payload 10kg
allowable end moment 0. 1kg · m2 2
position repeatability
x, y (flat surface) ±0. 01mm
z axis (vertical) ±0. 01mm
fourth axis (z-axial rotation) ±0. 004 °
input signal for hand: 5 inputs, 4 outputs
air piping for hand: 6 x 4
position detection method: absolute encoder mode
total weight: approx. 52kg
robot controller cable: standard: 5m (optional: maximum 25 m)
controller: ts3000

1: horizontal 300mm, vertical 25mm, round-trip continuous operation is not possible beyond the effective load ratio.
2: acceleration/deceleration rates may be limited according to the motion pattern, load mass and amount of offset. SCARA ROBOT TOSHIBA TH650A TOSHIBA TH650A HIGH-SPEED ROBOT, ARMS LENGTH 650 MM, MAXIMUM CAPACITY 10 KG THIS SCARA ROBOT WAS USED ONLY FOR TESTING AND DEMONSTRATION PURPOSES, IS SO IN FACT AS GOOD AS NEW! CLEAN ROOM DESIGN, IP65 ARM LENGTH FULL LENGTH 650MM FIRST ARM 300MM SECOND ARM 350MM RANGE OF MOTION FIRST AXIS ±160 ° SECOND AXIS ±143 ° THIRD AXIS (Z-AXIS) 200MM (OPTION: 400MM) FOURTH AXIS (Z-AXIAL ROTATION) ±360 ° MAXIMUM SPEED FIRST AXIS 340 ° / S SECOND AXIS 600 ° / S THIRD AXIS (Z-AXIS) 2050MM / S FOURTH AXIS (Z-AXIAL ROTATION) 1700 ° / S COMPOSITE SPEED 7.52 M / S STANDARD CYCLE TIME HORIZONTAL DIRECTION: 300 MM VERTICAL DIRECTION: 25 MM, RECIPROCATING 0.31S 1 (WITH 2 KG WEIGHT) LOAD MAXIMUM PAYLOAD 10KG ALLOWABLE END MOMENT 0. 1KG · M2 2 POSITION REPEATABILITY X, Y (FLAT SURFACE) ±0. 01MM Z AXIS (VERTICAL) ±0. 01MM FOURTH AXIS (Z-AXIAL ROTATION) ±0. 004 ° INPUT SIGNAL FOR HAND: 5 INPUTS, 4 OUTPUTS AIR PIPING FOR HAND: 6 X 4 POSITION DETECTION METHOD: ABSOLUTE ENCODER MODE TOTAL WEIGHT: APPROX. 52KG ROBOT CONTROLLER CABLE: STANDARD: 5M (OPTIONAL: MAXIMUM 25 M) CONTROLLER: TS3000 1: HORIZONTAL 300MM, VERTICAL 25MM, ROUND-TRIP CONTINUOUS OPERATION IS NOT POSSIBLE BEYOND THE EFFECTIVE LOAD RATIO. 2: ACCELERATION/DECELERATION RATES MAY BE LIMITED ACCORDING TO THE MOTION PATTERN, LOAD MASS AND AMOUNT OF OFFSET.
Vendedor: Stolle Verpackungstechnik
Año de construcción: usado
Ubicación: Land-ultrasound device toshiba ssa 325 a just vision 400 - yom: 2001
probes: 
plg-805s - 8 mhz - linear probe
pvg-366m - 3.75 mhz - abdominal probe
inclusive: printer mitsubishi video copy processor p91     ULTRASOUND DEVICE TOSHIBA SSA 325 A JUST VISION 400 - YOM: 2001 PROBES: PLG-805S - 8 MHZ - LINEAR PROBE PVG-366M - 3.75 MHZ - ABDOMINAL PROBE INCLUSIVE: PRINTER MITSUBISHI VIDEO COPY PROCESSOR P91
Vendedor: ums - used medical systems UG
Año de construcción: usado
Precio: 200 €
Ubicación: Land-ultrasound probe toshiba 7.5 mhz plf703nt linear probe

sales to our terms and conditions. errors and spelling mistakes possible, subject to prior sale! 

ULTRASOUND PROBE TOSHIBA 7.5 MHZ PLF703NT LINEAR PROBE SALES TO OUR TERMS AND CONDITIONS. ERRORS AND SPELLING MISTAKES POSSIBLE, SUBJECT TO PRIOR SALE!
Vendedor: P&U Medizintechnik
Año de construcción: usado
Precio: 200 €
Ubicación: Land-toshiba pvf-375 mt, 3.75 mhz convex, handle broken (see picture)

sales to our terms and conditions. errors and spelling mistakes possible, subject to prior sale! 

TOSHIBA PVF-375 MT, 3.75 MHZ CONVEX, HANDLE BROKEN (SEE PICTURE) SALES TO OUR TERMS AND CONDITIONS. ERRORS AND SPELLING MISTAKES POSSIBLE, SUBJECT TO PRIOR SALE!
Vendedor: P&U Medizintechnik
Año de construcción: usado
Ubicación: Land-toshiba dc 350 c ( dal 350 svs2 ) horizontal cold chamber die casting machine
dc*c series die casting machines (with pressure spike reduction, flash prevention and independent control of injection speed and pressure
locking force: 350 tons
platen size: 935 x 935 mm
tie bar diameter: 125 mm
clearance between tie bars (v x h): 650 x 650 mm
die thickness (max - min): 700 - 300 mm
die stroke: 420 mm
injection stroke: 480 mm
injection positions: 0 and -125 mm
ejection stroke: 20 - 90 mm
main motors: 22 kw
machine weight: approx. 13 tons TOSHIBA DC 350 C ( DAL 350 SVS2 ) HORIZONTAL COLD CHAMBER DIE CASTING MACHINE DC*C SERIES DIE CASTING MACHINES (WITH PRESSURE SPIKE REDUCTION, FLASH PREVENTION AND INDEPENDENT CONTROL OF INJECTION SPEED AND PRESSURE LOCKING FORCE: 350 TONS PLATEN SIZE: 935 X 935 MM TIE BAR DIAMETER: 125 MM CLEARANCE BETWEEN TIE BARS (V X H): 650 X 650 MM DIE THICKNESS (MAX - MIN): 700 - 300 MM DIE STROKE: 420 MM INJECTION STROKE: 480 MM INJECTION POSITIONS: 0 AND -125 MM EJECTION STROKE: 20 - 90 MM MAIN MOTORS: 22 KW MACHINE WEIGHT: APPROX. 13 TONS
Vendedor: MachTechnica Ltd.
Año de construcción: usado
Ubicación: Land-x-travel: 1000mm, y-travel: 800mm, z-travel: 800mm, rotary table: 800x800mm, table load: 1500kg, tool magazin with 30 slots, different accessories. control: fanuc 3000 c.  X-TRAVEL: 1000MM, Y-TRAVEL: 800MM, Z-TRAVEL: 800MM, ROTARY TABLE: 800X800MM, TABLE LOAD: 1500KG, TOOL MAGAZIN WITH 30 SLOTS, DIFFERENT ACCESSORIES. CONTROL: FANUC 3000 C.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-we offer from small private clinic
toshiba diagnostic ultrasound system
nemio ssa-550a / manf. april 2002 /
software version 3.1000b fmi 972a version 4.5000d
probe 8mhz plm-805at
& black & white printer / manuals
welcome to inspect / 
warehouse near nürnberg/bavaria    WE OFFER FROM SMALL PRIVATE CLINIC TOSHIBA DIAGNOSTIC ULTRASOUND SYSTEM NEMIO SSA-550A / MANF. APRIL 2002 / SOFTWARE VERSION 3.1000B FMI 972A VERSION 4.5000D PROBE 8MHZ PLM-805AT & BLACK & WHITE PRINTER / MANUALS WELCOME TO INSPECT / WAREHOUSE NEAR NüRNBERG/BAVARIA
Vendedor: SanMedical GmbH
Año de construcción: usado
Precio: 550 €
Ubicación: Land-good condition GOOD CONDITION
Vendedor: P&U Medizintechnik
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more TOSHIBA types: