90 ofertas

Año de construcción: usado
Ubicación: Land-general

project no.: 905005
number: 1 pcs.
manufacturer: traub
type: tnc 65 dgy
control: traub tx 8f
year of construction: 1996 (2011)
state of preservation: second-hand machine
machine a (hours): 18,500
stories about: 1 layers

description

turning

maximum turning diameter 300 mm
maximum turning length 450 mm
maximum swing over bed cover 480 mm
maximum chuck diameter 175 mm
max speed main spindle 5600 1/min
maximum performance main spindle in ed 10-40 / 100% 18.5 kw
main spindle spindle passage 65 mm
spindle flange size a6 main spindle
axes on the main spindle unit c
hollow clamping cylinder to the main spindle
maximum rotation speed 5600 1/min spindle
maximum performance counter spindle in ed 10-40 / 100% 11 kw
spindle passage sub-spindle 65 mm
spindle flange size counter spindle a6
axis counter spindle unit v/c
travel in v counter spindle unit 520 mm
maximum rapid traverse speed v counter spindle unit 30 m / min
coolant through the spindle
werkstã¼ckausstosser in the counter spindle

turret top
number of stations of which powered 10/10
tool holder in the turret vdi 30
speed tool drive 4000 1/min
the revolver x/y/z axes
travel in x/y/z 140/70/450 mm
maximum rapid traverse in x/y/z 15/6/30 m / min

gun down
number of stations of which powered 10/10
tool holder in the turret vdi 30
speed tool drive 4000 1/min
the turret of x/z axes
travel in x/y/z 140 /-/ 450 mm
maximum rapid traverse in x/y/z 15 /-/ 30 m / min

more facilities

splash panel with fully encapsulated workspace
lighting in the work area
hinged belt chip conveyor
machine is / was operated with emulsion
coolant system
the belt of part of
precast acceptance facility
bar loader/bar feeder traub stamag dn 61

general technical data

total power consumption 49 kva
machine dimensions (lxwxh) approx. 2562 x 1969 x 1790 mm
machine weight approx. 6500 kg

comment

the engine was overhauled 2011 completely professionally and was since less than single shift operation.
we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 905005 NUMBER: 1 PCS. MANUFACTURER: TRAUB TYPE: TNC 65 DGY CONTROL: TRAUB TX 8F YEAR OF CONSTRUCTION: 1996 (2011) STATE OF PRESERVATION: SECOND-HAND MACHINE MACHINE A (HOURS): 18,500 STORIES ABOUT: 1 LAYERS DESCRIPTION TURNING MAXIMUM TURNING DIAMETER 300 MM MAXIMUM TURNING LENGTH 450 MM MAXIMUM SWING OVER BED COVER 480 MM MAXIMUM CHUCK DIAMETER 175 MM MAX SPEED MAIN SPINDLE 5600 1/MIN MAXIMUM PERFORMANCE MAIN SPINDLE IN ED 10-40 / 100% 18.5 KW MAIN SPINDLE SPINDLE PASSAGE 65 MM SPINDLE FLANGE SIZE A6 MAIN SPINDLE AXES ON THE MAIN SPINDLE UNIT C HOLLOW CLAMPING CYLINDER TO THE MAIN SPINDLE MAXIMUM ROTATION SPEED 5600 1/MIN SPINDLE MAXIMUM PERFORMANCE COUNTER SPINDLE IN ED 10-40 / 100% 11 KW SPINDLE PASSAGE SUB-SPINDLE 65 MM SPINDLE FLANGE SIZE COUNTER SPINDLE A6 AXIS COUNTER SPINDLE UNIT V/C TRAVEL IN V COUNTER SPINDLE UNIT 520 MM MAXIMUM RAPID TRAVERSE SPEED V COUNTER SPINDLE UNIT 30 M / MIN COOLANT THROUGH THE SPINDLE WERKSTüCKAUSSTOSSER IN THE COUNTER SPINDLE TURRET TOP NUMBER OF STATIONS OF WHICH POWERED 10/10 TOOL HOLDER IN THE TURRET VDI 30 SPEED TOOL DRIVE 4000 1/MIN THE REVOLVER X/Y/Z AXES TRAVEL IN X/Y/Z 140/70/450 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 15/6/30 M / MIN GUN DOWN NUMBER OF STATIONS OF WHICH POWERED 10/10 TOOL HOLDER IN THE TURRET VDI 30 SPEED TOOL DRIVE 4000 1/MIN THE TURRET OF X/Z AXES TRAVEL IN X/Y/Z 140 /-/ 450 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 15 /-/ 30 M / MIN MORE FACILITIES SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA HINGED BELT CHIP CONVEYOR MACHINE IS / WAS OPERATED WITH EMULSION COOLANT SYSTEM THE BELT OF PART OF PRECAST ACCEPTANCE FACILITY BAR LOADER/BAR FEEDER TRAUB STAMAG DN 61 GENERAL TECHNICAL DATA TOTAL POWER CONSUMPTION 49 KVA MACHINE DIMENSIONS (LXWXH) APPROX. 2562 X 1969 X 1790 MM MACHINE WEIGHT APPROX. 6500 KG COMMENT THE ENGINE WAS OVERHAULED 2011 COMPLETELY PROFESSIONALLY AND WAS SINCE LESS THAN SINGLE SHIFT OPERATION. WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 30 mm<br/>turning length: 270 mm<br/>control: tx 8f <br/>main spindle::  <br/>spindle hollow: 30 mm<br/>max. rpm: 7.000 min/-1<br/>power capacity - main spindel: 7,5 / 11 kw<br/>max. torque: 105 nm<br/>spindle bearing diameter: 65 mm<br/>c - axis: 360 °<br/>subspindel::  <br/>spindle hollow: 26 mm<br/>max. rpm: 7.000 min/-1<br/>power capacity - sub spindle: 3,7 / 5,5 kw<br/>max. torque: 35 nm<br/>traverses subspindle: 330 mm<br/>c - axis: 360 °<br/>tool mount::  <br/>number of turret: 2 <br/>no. of tool upper turret: 12 pos<br/>y - axis: +/- 18 mm<br/>tool positions lower turret: 12 pos<br/>shank diameter: 25 mm<br/>shaft length: 48 mm<br/>cross cut: 16 x 16 mm<br/>change-time chip to chip: ca. 1,2 sec<br/>driven tools::  <br/>number of driven toolspositions: 2 x 12 pos<br/>power capacity - driven tools: 2,6 kw<br/>spindle speed - driven tools: max. 8.000 min -1<br/>max. torque: 4,0 nm<br/>feeds::  <br/>rapid traverse: x:  12 m/min<br/>rapid traverse: z:  15 m/min<br/>rapid traverse: y:  7,5 m/min<br/>feed force: x/z:  3 kn<br/>feed force: y:  5 kn<br/>rapid traverse sub spindle: 24 m/min<br/>feeding force subsindle: 3 kn<br/>total power requirement: 35 kw<br/>weight of the machine ca.: 3,6 t<br/>dimensions of the machine ca.: 7,0 x 2,5 x 1,9 m<br/>documents:  <br/>bar feeder:  <br/>parts catcher:  <br/>coolantsystem:  <br/>signal-light:  <br/>chip conveyor:  <br/>cnc-turning- and milling center<br/>traub - tnc 30 dgy<br/><br/>- incl. bar feeder traub stamag dn 26 <br/><br/><br/><br/><br/> TURNING DIAMETER: 30 MM
TURNING LENGTH: 270 MM
CONTROL: TX 8F
MAIN SPINDLE::
SPINDLE HOLLOW: 30 MM
MAX. RPM: 7.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 7,5 / 11 KW
MAX. TORQUE: 105 NM
SPINDLE BEARING DIAMETER: 65 MM
C - AXIS: 360 °
SUBSPINDEL::
SPINDLE HOLLOW: 26 MM
MAX. RPM: 7.000 MIN/-1
POWER CAPACITY - SUB SPINDLE: 3,7 / 5,5 KW
MAX. TORQUE: 35 NM
TRAVERSES SUBSPINDLE: 330 MM
C - AXIS: 360 °
TOOL MOUNT::
NUMBER OF TURRET: 2
NO. OF TOOL UPPER TURRET: 12 POS
Y - AXIS: +/- 18 MM
TOOL POSITIONS LOWER TURRET: 12 POS
SHANK DIAMETER: 25 MM
SHAFT LENGTH: 48 MM
CROSS CUT: 16 X 16 MM
CHANGE-TIME CHIP TO CHIP: CA. 1,2 SEC
DRIVEN TOOLS::
NUMBER OF DRIVEN TOOLSPOSITIONS: 2 X 12 POS
POWER CAPACITY - DRIVEN TOOLS: 2,6 KW
SPINDLE SPEED - DRIVEN TOOLS: MAX. 8.000 MIN -1
MAX. TORQUE: 4,0 NM
FEEDS::
RAPID TRAVERSE: X: 12 M/MIN
RAPID TRAVERSE: Z: 15 M/MIN
RAPID TRAVERSE: Y: 7,5 M/MIN
FEED FORCE: X/Z: 3 KN
FEED FORCE: Y: 5 KN
RAPID TRAVERSE SUB SPINDLE: 24 M/MIN
FEEDING FORCE SUBSINDLE: 3 KN
TOTAL POWER REQUIREMENT: 35 KW
WEIGHT OF THE MACHINE CA.: 3,6 T
DIMENSIONS OF THE MACHINE CA.: 7,0 X 2,5 X 1,9 M
DOCUMENTS:
BAR FEEDER:
PARTS CATCHER:
COOLANTSYSTEM:
SIGNAL-LIGHT:
CHIP CONVEYOR:
CNC-TURNING- AND MILLING CENTER
TRAUB - TNC 30 DGY

- INCL. BAR FEEDER TRAUB STAMAG DN 26




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Precio: 33.000 €
Ubicación: Land-
description
brand	traub
model	tnm 42
id	7307
status	active
price	33.000 € + vat
year of manufacture	1998
location	bucure?ti / bucharest (ro)

cnc traub tnm 42 manufactured in 1998, turning diameter 42 mm, turning length: 250 mm, control: tx 8 h, turning speeds 40-4000 u / min, torque 220 nm, total power requirement: 20 kw, weight: 3 t, dimensions (l x w x h): 7500 x 2000 x 2000 mm. 

individual price: 33 000 eur / piece. package price with other 3 lathes: 22 000 eur / piece.  (4 pcs. in total 2 heymmat and 2 traub). id: 7304, 7305, 7306, 7307.

was used in the automotive industry. 

exworks. price is negotiable. 

contact
tel.: +40-359/175.575
fax: +40-259/426.248
mobil: +40-743/177.040 ; +40-740/221.698

technical inspection can be organized at least 24 hrs before the due date

we speak english. wir sprechen deutsch. (+40-740/221.698 )
hablamos español. beszélünk magyarul. (+40-743/177.040 )

irrtum, anderungen und zwischenverkauf vorbehalten /
subject to errors, changes and prior sale /
ne rezervam dreptul la greseli, modificari si vanzare prealabila.

 DESCRIPTION BRAND TRAUB MODEL TNM 42 ID 7307 STATUS ACTIVE PRICE 33.000 € + VAT YEAR OF MANUFACTURE 1998 LOCATION BUCURE?TI / BUCHAREST (RO) CNC TRAUB TNM 42 MANUFACTURED IN 1998, TURNING DIAMETER 42 MM, TURNING LENGTH: 250 MM, CONTROL: TX 8 H, TURNING SPEEDS 40-4000 U / MIN, TORQUE 220 NM, TOTAL POWER REQUIREMENT: 20 KW, WEIGHT: 3 T, DIMENSIONS (L X W X H): 7500 X 2000 X 2000 MM. INDIVIDUAL PRICE: 33 000 EUR / PIECE. PACKAGE PRICE WITH OTHER 3 LATHES: 22 000 EUR / PIECE. (4 PCS. IN TOTAL 2 HEYMMAT AND 2 TRAUB). ID: 7304, 7305, 7306, 7307. WAS USED IN THE AUTOMOTIVE INDUSTRY. EXWORKS. PRICE IS NEGOTIABLE. CONTACT TEL.: +40-359/175.575 FAX: +40-259/426.248 MOBIL: +40-743/177.040 ; +40-740/221.698 TECHNICAL INSPECTION CAN BE ORGANIZED AT LEAST 24 HRS BEFORE THE DUE DATE WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. (+40-740/221.698 ) HABLAMOS ESPAñOL. BESZéLüNK MAGYARUL. (+40-743/177.040 ) IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Ubicación: Land-max. machining diameter: 12,7 mm<br/>max. machining length: 130 mm<br/>control: tx 8i <br/>main spindle::  <br/>turning speed range - main spindle: 0 - 12.000 min/-1<br/>power capacity - main spindel: 4,0 / 2,5 kw<br/>max. torque: 7 nm<br/>spindle bearing diameter: 35 mm<br/>max. bar capacity: 12,7 mm<br/>c-axis: 0,001 °<br/>subspindle::  <br/>spindle speed range subspindle: 0 - 12.000 min/-1<br/>power capacity - sub spindle: 4,0 / 2,5 kw<br/>max. torque: 7 nm<br/>c-axis: 0,001 °<br/>turret::  <br/>number of toolpositions: 6 pos.<br/>shank diameter: 12 x 12 mm<br/>number of driven toolspositions: 6 pos.<br/>spindle speed - driven tool stations: 0 - 8.000 min -1<br/>power capacity driven tool-stations: 1,5 / 0,9 kw<br/>max. torque: 2,4 nm<br/>turret 2::  <br/>number of toolpositions: 6 pos.<br/>shank diameter: 12 x 12 mm<br/>number of driven toolspositions: 6 pos.<br/>spindle speed - driven tool stations: 0 - 8.000 min -1<br/>power capacity driven tool-stations: 1,5 / 0,9 kw<br/>max. torque: 2,4 nm<br/>backside processing::  <br/>number of fixed tools: 3 pos<br/>shank diameter: 20 mm<br/>number of driven toolspositions: 4 pos.<br/>shank diameter: 28 mm<br/>axis stroke::  <br/>x-axis: 1/2: 35 / 4: 39 mm<br/>y-axis: 37,5 (-9,5/+28) mm<br/>z-axis: 2: 50 / 3: 80 mm<br/>feeds::  <br/>rapid traverse ( x / y / z ): 15 / 15 / 30 m/min<br/>rapid traverse: c: 0 - 100 1/min<br/>feed speeds: x: max. 7.500 mm/min<br/>feed speeds: y: max. 7.500 mm/min<br/>feed speeds: z: max. 10.000 mm/min<br/>total power requirement: 18 kw<br/>weight of the machine ca.: 2,0 t<br/>dimensions of the machine ca.: 7,0 x 2,5 x 2,3 m<br/>documents:  <br/>chip conveyor:  <br/>bar feeder: fmb minimag <br/>coolantsystem:  <br/>tool drive mechanisum:  <br/>cnc - bar automatic lathe<br/>traub - tnl 12/7<br/><br/>- incl. barfeeder fmb minimag<br/><br/><br/><br/><br/> MAX. MACHINING DIAMETER: 12,7 MM
MAX. MACHINING LENGTH: 130 MM
CONTROL: TX 8I
MAIN SPINDLE::
TURNING SPEED RANGE - MAIN SPINDLE: 0 - 12.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 4,0 / 2,5 KW
MAX. TORQUE: 7 NM
SPINDLE BEARING DIAMETER: 35 MM
MAX. BAR CAPACITY: 12,7 MM
C-AXIS: 0,001 °
SUBSPINDLE::
SPINDLE SPEED RANGE SUBSPINDLE: 0 - 12.000 MIN/-1
POWER CAPACITY - SUB SPINDLE: 4,0 / 2,5 KW
MAX. TORQUE: 7 NM
C-AXIS: 0,001 °
TURRET::
NUMBER OF TOOLPOSITIONS: 6 POS.
SHANK DIAMETER: 12 X 12 MM
NUMBER OF DRIVEN TOOLSPOSITIONS: 6 POS.
SPINDLE SPEED - DRIVEN TOOL STATIONS: 0 - 8.000 MIN -1
POWER CAPACITY DRIVEN TOOL-STATIONS: 1,5 / 0,9 KW
MAX. TORQUE: 2,4 NM
TURRET 2::
NUMBER OF TOOLPOSITIONS: 6 POS.
SHANK DIAMETER: 12 X 12 MM
NUMBER OF DRIVEN TOOLSPOSITIONS: 6 POS.
SPINDLE SPEED - DRIVEN TOOL STATIONS: 0 - 8.000 MIN -1
POWER CAPACITY DRIVEN TOOL-STATIONS: 1,5 / 0,9 KW
MAX. TORQUE: 2,4 NM
BACKSIDE PROCESSING::
NUMBER OF FIXED TOOLS: 3 POS
SHANK DIAMETER: 20 MM
NUMBER OF DRIVEN TOOLSPOSITIONS: 4 POS.
SHANK DIAMETER: 28 MM
AXIS STROKE::
X-AXIS: 1/2: 35 / 4: 39 MM
Y-AXIS: 37,5 (-9,5/+28) MM
Z-AXIS: 2: 50 / 3: 80 MM
FEEDS::
RAPID TRAVERSE ( X / Y / Z ): 15 / 15 / 30 M/MIN
RAPID TRAVERSE: C: 0 - 100 1/MIN
FEED SPEEDS: X: MAX. 7.500 MM/MIN
FEED SPEEDS: Y: MAX. 7.500 MM/MIN
FEED SPEEDS: Z: MAX. 10.000 MM/MIN
TOTAL POWER REQUIREMENT: 18 KW
WEIGHT OF THE MACHINE CA.: 2,0 T
DIMENSIONS OF THE MACHINE CA.: 7,0 X 2,5 X 2,3 M
DOCUMENTS:
CHIP CONVEYOR:
BAR FEEDER: FMB MINIMAG
COOLANTSYSTEM:
TOOL DRIVE MECHANISUM:
CNC - BAR AUTOMATIC LATHE
TRAUB - TNL 12/7

- INCL. BARFEEDER FMB MINIMAG




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Precio: 33.000 €
Ubicación: Land-
description
brand	traub
model	tnm 42
id	7306
status	active
price	33.000 € + vat
year of manufacture	1998
location	bucure?ti / bucharest (ro)

cnc traub tnm 42 manufactured in 1998, turning diameter 42 mm, turning length: 250 mm, control: tx 8 h, turning speeds 40-4000 u / min, torque 220 nm, total power requirement: 20 kw, weight: 3 t, dimensions (l x w x h): 7500 x 2000 x 2000 mm. 

individual price: 33 000 eur / piece. package price with other 3 lathes: 22 000 eur / piece.  (4 pcs. in total 2 heymmat and 2 traub). id: 7304, 7305, 7306, 7307.

was used in the automotive industry. 

exworks. price is negotiable. 

contact
tel.: +40-359/175.575
fax: +40-259/426.248
mobil: +40-743/177.040 ; +40-740/221.698

technical inspection can be organized at least 24 hrs before the due date

we speak english. wir sprechen deutsch. (+40-740/221.698 )
hablamos español. beszélünk magyarul. (+40-743/177.040 )

irrtum, anderungen und zwischenverkauf vorbehalten /
subject to errors, changes and prior sale /
ne rezervam dreptul la greseli, modificari si vanzare prealabila.

 DESCRIPTION BRAND TRAUB MODEL TNM 42 ID 7306 STATUS ACTIVE PRICE 33.000 € + VAT YEAR OF MANUFACTURE 1998 LOCATION BUCURE?TI / BUCHAREST (RO) CNC TRAUB TNM 42 MANUFACTURED IN 1998, TURNING DIAMETER 42 MM, TURNING LENGTH: 250 MM, CONTROL: TX 8 H, TURNING SPEEDS 40-4000 U / MIN, TORQUE 220 NM, TOTAL POWER REQUIREMENT: 20 KW, WEIGHT: 3 T, DIMENSIONS (L X W X H): 7500 X 2000 X 2000 MM. INDIVIDUAL PRICE: 33 000 EUR / PIECE. PACKAGE PRICE WITH OTHER 3 LATHES: 22 000 EUR / PIECE. (4 PCS. IN TOTAL 2 HEYMMAT AND 2 TRAUB). ID: 7304, 7305, 7306, 7307. WAS USED IN THE AUTOMOTIVE INDUSTRY. EXWORKS. PRICE IS NEGOTIABLE. CONTACT TEL.: +40-359/175.575 FAX: +40-259/426.248 MOBIL: +40-743/177.040 ; +40-740/221.698 TECHNICAL INSPECTION CAN BE ORGANIZED AT LEAST 24 HRS BEFORE THE DUE DATE WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. (+40-740/221.698 ) HABLAMOS ESPAñOL. BESZéLüNK MAGYARUL. (+40-743/177.040 ) IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Ubicación: Land-turning diameter: 30 mm<br/>turning length: 270 mm<br/>control: tx 8f <br/>main spindle::  <br/>spindle hollow: 30 mm<br/>max. rpm: 7.000 min/-1<br/>power capacity - main spindel: 7,5 / 11 kw<br/>max. torque: 105 nm<br/>spindle bearing diameter: 65 mm<br/>c - axis: 360 °<br/>subspindel::  <br/>spindle hollow: 26 mm<br/>max. rpm: 7.000 min/-1<br/>power capacity - sub spindle: 3,7 / 5,5 kw<br/>max. torque: 35 nm<br/>traverses subspindle: 330 mm<br/>c - axis: 360 °<br/>tool mount::  <br/>number of turret: 2 <br/>no. of tool upper turret: 12 pos<br/>y - axis: +/- 18 mm<br/>tool positions lower turret: 12 pos<br/>shank diameter: 25 mm<br/>shaft length: 48 mm<br/>cross cut: 16 x 16 mm<br/>change-time chip to chip: ca. 1,2 sec<br/>driven tools::  <br/>number of driven toolspositions: 2 x 12 pos<br/>power capacity - driven tools: 1,5 / 2,6 kw<br/>spindle speed - driven tools: max. 8.000 min -1<br/>max. torque: 4,0 nm<br/>feeds::  <br/>rapid traverse: x:  12 m/min<br/>rapid traverse: z:  15 m/min<br/>rapid traverse: y:  7,5 m/min<br/>feed force: x/z:  3 kn<br/>feed force: y:  5 kn<br/>rapid traverse sub spindle: 24 m/min<br/>feeding force subsindle: 3 kn<br/>total power requirement: 35 kw<br/>weight of the machine ca.: 3,6 t<br/>dimensions of the machine ca.: 7,0 x 2,5 x 1,9 m<br/>documents:  <br/>bar feeder:  <br/>parts catcher:  <br/>coolantsystem:  <br/>signal-light:  <br/>chip conveyor:  <br/>cnc-turning- and milling center<br/>traub - tnc 30 dgy<br/><br/>- incl. bar feeder traub stamag dn 26 <br/><br/><br/><br/><br/> TURNING DIAMETER: 30 MM
TURNING LENGTH: 270 MM
CONTROL: TX 8F
MAIN SPINDLE::
SPINDLE HOLLOW: 30 MM
MAX. RPM: 7.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 7,5 / 11 KW
MAX. TORQUE: 105 NM
SPINDLE BEARING DIAMETER: 65 MM
C - AXIS: 360 °
SUBSPINDEL::
SPINDLE HOLLOW: 26 MM
MAX. RPM: 7.000 MIN/-1
POWER CAPACITY - SUB SPINDLE: 3,7 / 5,5 KW
MAX. TORQUE: 35 NM
TRAVERSES SUBSPINDLE: 330 MM
C - AXIS: 360 °
TOOL MOUNT::
NUMBER OF TURRET: 2
NO. OF TOOL UPPER TURRET: 12 POS
Y - AXIS: +/- 18 MM
TOOL POSITIONS LOWER TURRET: 12 POS
SHANK DIAMETER: 25 MM
SHAFT LENGTH: 48 MM
CROSS CUT: 16 X 16 MM
CHANGE-TIME CHIP TO CHIP: CA. 1,2 SEC
DRIVEN TOOLS::
NUMBER OF DRIVEN TOOLSPOSITIONS: 2 X 12 POS
POWER CAPACITY - DRIVEN TOOLS: 1,5 / 2,6 KW
SPINDLE SPEED - DRIVEN TOOLS: MAX. 8.000 MIN -1
MAX. TORQUE: 4,0 NM
FEEDS::
RAPID TRAVERSE: X: 12 M/MIN
RAPID TRAVERSE: Z: 15 M/MIN
RAPID TRAVERSE: Y: 7,5 M/MIN
FEED FORCE: X/Z: 3 KN
FEED FORCE: Y: 5 KN
RAPID TRAVERSE SUB SPINDLE: 24 M/MIN
FEEDING FORCE SUBSINDLE: 3 KN
TOTAL POWER REQUIREMENT: 35 KW
WEIGHT OF THE MACHINE CA.: 3,6 T
DIMENSIONS OF THE MACHINE CA.: 7,0 X 2,5 X 1,9 M
DOCUMENTS:
BAR FEEDER:
PARTS CATCHER:
COOLANTSYSTEM:
SIGNAL-LIGHT:
CHIP CONVEYOR:
CNC-TURNING- AND MILLING CENTER
TRAUB - TNC 30 DGY

- INCL. BAR FEEDER TRAUB STAMAG DN 26




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Precio: 33.000 €
Ubicación: Land-
description
brand	heyligenstaedt
model	heymmat 5l-2/850
id	7305
status	active
price	33.000 € + vat
year of manufacture	1994
location	bucure?ti / bucharest (ro)

cnc heyligenstaedt heymmat 5l-2/850 manufactured in 1994. piston 1: p. max.: 41,5 bari, f max.: 73000 n, piston 2: p. max.: 20 bari, f max.: 8000 n, n max.: 4000 min. voltage: 400 v / 50 hz, 81 kva.

individual price: 33 000 eur / piece. package price with other 3 lathes: 22 000 eur / piece.  (4 pcs. in total 2 heymmat and 2 traub). id: 7304, 7305, 7306, 7307.

was used in the automotive industry. 

exworks. price is negotiable. 

contact
tel.: +40-359/175.575
fax: +40-259/426.248
mobil: +40-743/177.040 ; +40-740/221.698

technical inspection can be organized at least 24 hrs before the due date

we speak english. wir sprechen deutsch. (+40-740/221.698 )
hablamos español. beszélünk magyarul. (+40-743/177.040 )

irrtum, anderungen und zwischenverkauf vorbehalten /
subject to errors, changes and prior sale /
ne rezervam dreptul la greseli, modificari si vanzare prealabila. DESCRIPTION BRAND HEYLIGENSTAEDT MODEL HEYMMAT 5L-2/850 ID 7305 STATUS ACTIVE PRICE 33.000 € + VAT YEAR OF MANUFACTURE 1994 LOCATION BUCURE?TI / BUCHAREST (RO) CNC HEYLIGENSTAEDT HEYMMAT 5L-2/850 MANUFACTURED IN 1994. PISTON 1: P. MAX.: 41,5 BARI, F MAX.: 73000 N, PISTON 2: P. MAX.: 20 BARI, F MAX.: 8000 N, N MAX.: 4000 MIN. VOLTAGE: 400 V / 50 HZ, 81 KVA. INDIVIDUAL PRICE: 33 000 EUR / PIECE. PACKAGE PRICE WITH OTHER 3 LATHES: 22 000 EUR / PIECE. (4 PCS. IN TOTAL 2 HEYMMAT AND 2 TRAUB). ID: 7304, 7305, 7306, 7307. WAS USED IN THE AUTOMOTIVE INDUSTRY. EXWORKS. PRICE IS NEGOTIABLE. CONTACT TEL.: +40-359/175.575 FAX: +40-259/426.248 MOBIL: +40-743/177.040 ; +40-740/221.698 TECHNICAL INSPECTION CAN BE ORGANIZED AT LEAST 24 HRS BEFORE THE DUE DATE WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. (+40-740/221.698 ) HABLAMOS ESPAñOL. BESZéLüNK MAGYARUL. (+40-743/177.040 ) IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Precio: used machinery auction RESALE 1.500 €
Ubicación: Land-weight approx.: 3500 kg<br/>turning diameter: 360 mm<br/>control: traub tx8 <br/>turning length: 800 mm<br/>dimensions (l x w x h) approx.: 3800x2000x1900 mm<br/>toolchanger positions: 8 <br/>turning speed range: 7 - 3150 rpm<br/>rapid travel range: 10 m/min<br/>longitudinal slide -travel: 850 mm<br/>cross slide - travel: 205 mm<br/>spindle bore: 60 mm<br/>tool taper: 25 x 25 mm <br/>total power requirement: 38 kw<br/>description: traub tnd 360 tx8 cnc lathe<br> z-travel: 850mm<br> x-travel: 205mm<br> with tool presetter<br> cnc control does not boot - assumption: parameter loss due to empty backup battery WEIGHT APPROX.: 3500 KG
TURNING DIAMETER: 360 MM
CONTROL: TRAUB TX8
TURNING LENGTH: 800 MM
DIMENSIONS (L X W X H) APPROX.: 3800X2000X1900 MM
TOOLCHANGER POSITIONS: 8
TURNING SPEED RANGE: 7 - 3150 RPM
RAPID TRAVEL RANGE: 10 M/MIN
LONGITUDINAL SLIDE -TRAVEL: 850 MM
CROSS SLIDE - TRAVEL: 205 MM
SPINDLE BORE: 60 MM
TOOL TAPER: 25 X 25 MM
TOTAL POWER REQUIREMENT: 38 KW
DESCRIPTION: TRAUB TND 360 TX8 CNC LATHE
Z-TRAVEL: 850MM
X-TRAVEL: 205MM
WITH TOOL PRESETTER
CNC CONTROL DOES NOT BOOT - ASSUMPTION: PARAMETER LOSS DUE TO EMPTY BACKUP BATTERY
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 33.000 €
Ubicación: Land-description
brand	heyligenstaedt
model	heymmat 5l-2/850
id	7304
status	active
price	33.000 € + vat
year of manufacture	1994
location	bucure?ti / bucharest (ro)

cnc heyligenstaedt heymmat 5l-2/850 manufactured in 1994. piston 1: p. max.: 41,5 bari, f max.: 73000 n, piston 2: p. max.: 20 bari, f max.: 8000 n, n max.: 4000 min. voltage: 400 v / 50 hz, 81 kva.

individual price: 33 000 eur / piece. package price with other 3 lathes: 22 000 eur / piece.  (4 pcs. in total 2 heymmat and 2 traub). id: 7304, 7305, 7306, 7307.

was used in the automotive industry. 

exworks. price is negotiable. 

contact
tel.: +40-359/175.575
fax: +40-259/426.248
mobil: +40-743/177.040 ; +40-740/221.698

technical inspection can be organized at least 24 hrs before the due date

we speak english. wir sprechen deutsch. (+40-740/221.698 )
hablamos español. beszélünk magyarul. (+40-743/177.040 )

irrtum, anderungen und zwischenverkauf vorbehalten /
subject to errors, changes and prior sale /
ne rezervam dreptul la greseli, modificari si vanzare prealabila. DESCRIPTION BRAND HEYLIGENSTAEDT MODEL HEYMMAT 5L-2/850 ID 7304 STATUS ACTIVE PRICE 33.000 € + VAT YEAR OF MANUFACTURE 1994 LOCATION BUCURE?TI / BUCHAREST (RO) CNC HEYLIGENSTAEDT HEYMMAT 5L-2/850 MANUFACTURED IN 1994. PISTON 1: P. MAX.: 41,5 BARI, F MAX.: 73000 N, PISTON 2: P. MAX.: 20 BARI, F MAX.: 8000 N, N MAX.: 4000 MIN. VOLTAGE: 400 V / 50 HZ, 81 KVA. INDIVIDUAL PRICE: 33 000 EUR / PIECE. PACKAGE PRICE WITH OTHER 3 LATHES: 22 000 EUR / PIECE. (4 PCS. IN TOTAL 2 HEYMMAT AND 2 TRAUB). ID: 7304, 7305, 7306, 7307. WAS USED IN THE AUTOMOTIVE INDUSTRY. EXWORKS. PRICE IS NEGOTIABLE. CONTACT TEL.: +40-359/175.575 FAX: +40-259/426.248 MOBIL: +40-743/177.040 ; +40-740/221.698 TECHNICAL INSPECTION CAN BE ORGANIZED AT LEAST 24 HRS BEFORE THE DUE DATE WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. (+40-740/221.698 ) HABLAMOS ESPAñOL. BESZéLüNK MAGYARUL. (+40-743/177.040 ) IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Ubicación: Land-turning diameter: 26 mm<br/>turning length: 170 mm<br/>control: tx 8i <br/>turning speeds: 6000 u/min<br/>c-axis: 0,001° <br/>turret (x-stations): 12-fach angetrieben<br/>turning speeds: 6000 u/min<br/>gripping station: 26 mm<br/>spindle: 10,7 kw<br/>turning speeds: 6000 u/min<br/>c-axis: 0,001° <br/>number of working hours: 41425 h<br/>chip conveyor: ja / yes kw<br/>coolant tank: resy l<br/>total power requirement: 10,5 kw<br/>weight of the machine ca.: 4 t<br/>dimensions of the machine ca.: 2,4 x 1,6 x 2,2 + lns m<br/>bar loader: lns hydrobar express 226 3m stange<br/>cnc sliding headstock machine traub tnl 26, 1 turret & lns barloader<br/>front working 5 stations<br/>rear working 5 stations<br/><br/><br/><br/><br/> TURNING DIAMETER: 26 MM
TURNING LENGTH: 170 MM
CONTROL: TX 8I
TURNING SPEEDS: 6000 U/MIN
C-AXIS: 0,001°
TURRET (X-STATIONS): 12-FACH ANGETRIEBEN
TURNING SPEEDS: 6000 U/MIN
GRIPPING STATION: 26 MM
SPINDLE: 10,7 KW
TURNING SPEEDS: 6000 U/MIN
C-AXIS: 0,001°
NUMBER OF WORKING HOURS: 41425 H
CHIP CONVEYOR: JA / YES KW
COOLANT TANK: RESY L
TOTAL POWER REQUIREMENT: 10,5 KW
WEIGHT OF THE MACHINE CA.: 4 T
DIMENSIONS OF THE MACHINE CA.: 2,4 X 1,6 X 2,2 + LNS M
BAR LOADER: LNS HYDROBAR EXPRESS 226 3M STANGE
CNC SLIDING HEADSTOCK MACHINE TRAUB TNL 26, 1 TURRET & LNS BARLOADER
FRONT WORKING 5 STATIONS
REAR WORKING 5 STATIONS




Vendedor: Detlef Jahn e. K.
Año de construcción: usado
Ubicación: Land-built in 1987, 2 turret, control traub tx 8 d, synchronous setup on revolver i, feeder stamag type dn 42, rebuilt by fa ulmer in 2005, hours of operation: 31500 h.
spindle passage 42 mm
gr. drehdurchm. 140 mm
gr. turning length 220 mm
spindle speeds up to 5600 rpm
number of tool holder in two revolvers each 12
spindle drive 16 kw
weight of the machine 4.1 t
accessories: coolant system, tensioning clamp device, tool holders. BUILT IN 1987, 2 TURRET, CONTROL TRAUB TX 8 D, SYNCHRONOUS SETUP ON REVOLVER I, FEEDER STAMAG TYPE DN 42, REBUILT BY FA ULMER IN 2005, HOURS OF OPERATION: 31500 H. SPINDLE PASSAGE 42 MM GR. DREHDURCHM. 140 MM GR. TURNING LENGTH 220 MM SPINDLE SPEEDS UP TO 5600 RPM NUMBER OF TOOL HOLDER IN TWO REVOLVERS EACH 12 SPINDLE DRIVE 16 KW WEIGHT OF THE MACHINE 4.1 T ACCESSORIES: COOLANT SYSTEM, TENSIONING CLAMP DEVICE, TOOL HOLDERS.
Vendedor: Schraag Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 42 / 175 mm<br/>turning length: 450 mm<br/>control: system tx 8f <br/>turning speeds: 56-5600 u/min<br/>c-axis: ja °<br/>turret (x-stations): 12 (6 angetr.) vdi 30<br/>collet unit: groesse a5 .<br/>number of working hours: 38016 h (dez. 2018)<br/>load magazine: lns quickload <br/>feed: 20000 mm/min<br/>rapid travel x/y/z: 10/20 m/min<br/>tail stock: mk 4 <br/>tailstock travel: 125 mm<br/>chip conveyor: ja kw<br/>total power requirement: 38,5 kw<br/>weight of the machine ca.: 3,8 t<br/>dimensions of the machine ca.: 2,5 x 2 x 2 m<br/>oil mist filter: ja <br/>cnc lathe traub tnd 300 with short loader lns quick load<br/><br/><br/><br/><br/> TURNING DIAMETER: 42 / 175 MM
TURNING LENGTH: 450 MM
CONTROL: SYSTEM TX 8F
TURNING SPEEDS: 56-5600 U/MIN
C-AXIS: JA °
TURRET (X-STATIONS): 12 (6 ANGETR.) VDI 30
COLLET UNIT: GROESSE A5 .
NUMBER OF WORKING HOURS: 38016 H (DEZ. 2018)
LOAD MAGAZINE: LNS QUICKLOAD
FEED: 20000 MM/MIN
RAPID TRAVEL X/Y/Z: 10/20 M/MIN
TAIL STOCK: MK 4
TAILSTOCK TRAVEL: 125 MM
CHIP CONVEYOR: JA KW
TOTAL POWER REQUIREMENT: 38,5 KW
WEIGHT OF THE MACHINE CA.: 3,8 T
DIMENSIONS OF THE MACHINE CA.: 2,5 X 2 X 2 M
OIL MIST FILTER: JA
CNC LATHE TRAUB TND 300 WITH SHORT LOADER LNS QUICK LOAD




Vendedor: Detlef Jahn e. K.
Año de construcción: usado
Ubicación: Land-name year magazine comment
traub tnl12/7 1998 iemca genius 112/32 machine until 01/2019 in operation
traub tnl12/7 2000 iemca genius 112/32 in operation
traub tnl12/7 2004 iemca genius 118 / 32l running
 NAME YEAR MAGAZINE COMMENT TRAUB TNL12/7 1998 IEMCA GENIUS 112/32 MACHINE UNTIL 01/2019 IN OPERATION TRAUB TNL12/7 2000 IEMCA GENIUS 112/32 IN OPERATION TRAUB TNL12/7 2004 IEMCA GENIUS 118 / 32L RUNNING
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: 110 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-operating hours: 65317 h	
control system:	
cnc traub tx 8h	
2 spindle	
turning length: 450 mm	
spindle passage of main spindle: 65 mm	
tool changer positions: 14	
max. spindle speed: 4000 rpm	
max. speed( c-axis): 100 rpm	
max. clamping diameter: 60 mm	
x-axis-slides s1 and s2:	
rapid traverse and travel speed:	
15000 mm/min	
z-axis-slides s1 and s2:	
rapid traverse and travel speed:	
30000 mm/min	
y-axis-slides s1:	
rapid traverse and travel speed:	
6000 mm/min	
machine dimensions:	
4250 x 2076 x 1917 mm	
machine weight: 4800 kg	
accessories:	
collet	
drive tools	
feeder magazine:	
spacesaver ss 2003	
availability: 04.06.2019  OPERATING HOURS: 65317 H CONTROL SYSTEM: CNC TRAUB TX 8H 2 SPINDLE TURNING LENGTH: 450 MM SPINDLE PASSAGE OF MAIN SPINDLE: 65 MM TOOL CHANGER POSITIONS: 14 MAX. SPINDLE SPEED: 4000 RPM MAX. SPEED( C-AXIS): 100 RPM MAX. CLAMPING DIAMETER: 60 MM X-AXIS-SLIDES S1 AND S2: RAPID TRAVERSE AND TRAVEL SPEED: 15000 MM/MIN Z-AXIS-SLIDES S1 AND S2: RAPID TRAVERSE AND TRAVEL SPEED: 30000 MM/MIN Y-AXIS-SLIDES S1: RAPID TRAVERSE AND TRAVEL SPEED: 6000 MM/MIN MACHINE DIMENSIONS: 4250 X 2076 X 1917 MM MACHINE WEIGHT: 4800 KG ACCESSORIES: COLLET DRIVE TOOLS FEEDER MAGAZINE: SPACESAVER SS 2003 AVAILABILITY: 04.06.2019
Vendedor: AMARON s.r.o.
Año de construcción: usado
Precio: 90 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-cnc lathe used with conveyors and rod loader,
cnc lathe with chip conveyor and bar loader, used serial / make: traub type / model: 400 tnd
year / year: 1992
cnc control / cnc control: mitsubishi tx 8 f
â 
technical data / technicl details
spindle forward / internal diam of spindle: 65 mm
spannfutterdurchm. / diam of chuck: 200 /250 mm
swing over cross slide / swing over cross slide 240 mm
turning diameter over bed / swing over bed 480 mm
turning length / turning length 800 mm
â 
workpiece diameter. / diam of work: 160 mm
workpiece weight / weight of work: 8 kg
main drive / main spindle
rpm / speed of spindle: 40-4000 min / 1
performance at / / power reuired at100(60) %: 30(35) kw
â 
toboggan runs plan/longitudinal; travel of slide, cross/longit.: 220/850 mm
rapid / rapid travel: plan / cross: 10000 mm / min
longitudinal / longit. 20000 mm / min
â 
tool changer / tools in turret: 12 x / 12 tools
tailstock
quill stroke / travel of quill: 140 mm
pinolendurchm / diam. of quill: 856 mm overall power demand / total load: 52 kw
weight / weight of machine: 4300 kg
â 
features/specification
â 
chip conveyor / rod loader, used
chip conveyor / bar loader CNC LATHE USED WITH CONVEYORS AND ROD LOADER, CNC LATHE WITH CHIP CONVEYOR AND BAR LOADER, USED SERIAL / MAKE: TRAUB TYPE / MODEL: 400 TND YEAR / YEAR: 1992 CNC CONTROL / CNC CONTROL: MITSUBISHI TX 8 F &ACIRC;&NBSP; TECHNICAL DATA / TECHNICL DETAILS SPINDLE FORWARD / INTERNAL DIAM OF SPINDLE: 65 MM SPANNFUTTERDURCHM. / DIAM OF CHUCK: 200 /250 MM SWING OVER CROSS SLIDE / SWING OVER CROSS SLIDE 240 MM TURNING DIAMETER OVER BED / SWING OVER BED 480 MM TURNING LENGTH / TURNING LENGTH 800 MM &ACIRC;&NBSP; WORKPIECE DIAMETER. / DIAM OF WORK: 160 MM WORKPIECE WEIGHT / WEIGHT OF WORK: 8 KG MAIN DRIVE / MAIN SPINDLE RPM / SPEED OF SPINDLE: 40-4000 MIN / 1 PERFORMANCE AT / / POWER REUIRED AT100(60) %: 30(35) KW &ACIRC;&NBSP; TOBOGGAN RUNS PLAN/LONGITUDINAL; TRAVEL OF SLIDE, CROSS/LONGIT.: 220/850 MM RAPID / RAPID TRAVEL: PLAN / CROSS: 10000 MM / MIN LONGITUDINAL / LONGIT. 20000 MM / MIN &ACIRC;&NBSP; TOOL CHANGER / TOOLS IN TURRET: 12 X / 12 TOOLS TAILSTOCK QUILL STROKE / TRAVEL OF QUILL: 140 MM PINOLENDURCHM / DIAM. OF QUILL: 856 MM OVERALL POWER DEMAND / TOTAL LOAD: 52 KW WEIGHT / WEIGHT OF MACHINE: 4300 KG &ACIRC;&NBSP; FEATURES/SPECIFICATION &ACIRC;&NBSP; CHIP CONVEYOR / ROD LOADER, USED CHIP CONVEYOR / BAR LOADER
Vendedor: ZOMA Maschinenhandel
Año de construcción: usado
Ubicación: Land-tool taper: 28 mm<br/>shaft cross cut: 28 mm<br/>tool taper: er 11 <br/>ratio: 0,6 <br/>turning speeds:  u/min<br/>:  <br/>coolant:  <br/>driven tool holder 950500-483 for traub tnl 12<br/><br/><br/><br/><br/> TOOL TAPER: 28 MM
SHAFT CROSS CUT: 28 MM
TOOL TAPER: ER 11
RATIO: 0,6
TURNING SPEEDS: U/MIN
:
COOLANT:
DRIVEN TOOL HOLDER 950500-483 FOR TRAUB TNL 12




Vendedor: Detlef Jahn e. K.
Año de construcción: usado
Ubicación: Land-connected load: 34kw, controls: traub system tx-8-d, weight: 4.1t, including bar loader, machine has a broken cable, but is still functional.  CONNECTED LOAD: 34KW, CONTROLS: TRAUB SYSTEM TX-8-D, WEIGHT: 4.1T, INCLUDING BAR LOADER, MACHINE HAS A BROKEN CABLE, BUT IS STILL FUNCTIONAL.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-tool taper: 28 mm<br/>shaft cross cut: 28 mm<br/>tool taper: er 11 <br/>ratio: 1,7 <br/>turning speeds:  u/min<br/>:  <br/>coolant:  <br/>driven tool holder 950500-483 for traub tnl 12<br/><br/><br/><br/><br/> TOOL TAPER: 28 MM
SHAFT CROSS CUT: 28 MM
TOOL TAPER: ER 11
RATIO: 1,7
TURNING SPEEDS: U/MIN
:
COOLANT:
DRIVEN TOOL HOLDER 950500-483 FOR TRAUB TNL 12




Vendedor: Detlef Jahn e. K.
Año de construcción: usado
Ubicación: Land-connected load: 18kw, controls: traub system tx-8f, length: 3100mm, width: 1650mm, height: 1650mm, weight: 2.8t, operational hours: ca. 70,000 h,including fire extinguishing system and bar loader: length: 4300mm, width: 1050mm, height: 1300mm and accessories and tool for lathe and bar loader. CONNECTED LOAD: 18KW, CONTROLS: TRAUB SYSTEM TX-8F, LENGTH: 3100MM, WIDTH: 1650MM, HEIGHT: 1650MM, WEIGHT: 2.8T, OPERATIONAL HOURS: CA. 70,000 H,INCLUDING FIRE EXTINGUISHING SYSTEM AND BAR LOADER: LENGTH: 4300MM, WIDTH: 1050MM, HEIGHT: 1300MM AND ACCESSORIES AND TOOL FOR LATHE AND BAR LOADER.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-tool taper: 28 mm<br/>shaft cross cut: 28 mm<br/>tool taper: er 11 <br/>ratio:  <br/>turning speeds:  u/min<br/>:  <br/>coolant:  <br/>driven tool holder 950500-483 for traub tnl 12<br/><br/><br/><br/><br/> TOOL TAPER: 28 MM
SHAFT CROSS CUT: 28 MM
TOOL TAPER: ER 11
RATIO:
TURNING SPEEDS: U/MIN
:
COOLANT:
DRIVEN TOOL HOLDER 950500-483 FOR TRAUB TNL 12




Vendedor: Detlef Jahn e. K.
Año de construcción: usado
Ubicación: Land-manufacturer: traub
model: tnl 18-7
year of construction: 2011
control: mitsubishi tx8i-s
turning length [mm]: 200
spindle transmission rate [mm]: 18 / 21 main spindle:
technology: motor spindle
speed: 12.000 rpm
power: 5.5 kw
spindle passage: 18 mm
c-axis: 0.001 â°

counter spindle:
speed: 12.000 rpm
power: 3,4 kw
workpiece diameter (maximum): 21 mm
clamping depth workpiece (maximum): 180 mm
clamping pressure (max.): 30 bar

tool carrier i (x/y/z):
technology: turret with 8 stations
tool holder: traub ã¸45 mm
driven tools: 12.000 rpm, 3,4 kw
traverse path x/y/z axis: 120/65/250 mm
rapid traverse x/y/z axis: 20/20/40 m / min

tool carrier ii (x/y/z):
technology: revolvers with 7 stations + counter spindle
tool holder: traub ã¸45 mm
driven tools: 12.000 rpm, 3,4 kw
traverse path x/y/z axis: 120/60/250 mm
rapid traverse x/y/z axis: 20/20/40 m / min

equipment / accessories:
measuring system: engine measuring system
spã¤nemangement: chip conveyor
coolant supply: internal cooling system with paper band filter, 30 bar
raw material supply: rod loader, fmb minimag 20/1600
precast drainage: grab with conveyor belt
oil mist extraction: mechanical separator, fabr. bã¼chel
fire extinguisher: power + bauer
network connection: preparing
tool holder: div. holder MANUFACTURER: TRAUB MODEL: TNL 18-7 YEAR OF CONSTRUCTION: 2011 CONTROL: MITSUBISHI TX8I-S TURNING LENGTH [MM]: 200 SPINDLE TRANSMISSION RATE [MM]: 18 / 21 MAIN SPINDLE: TECHNOLOGY: MOTOR SPINDLE SPEED: 12.000 RPM POWER: 5.5 KW SPINDLE PASSAGE: 18 MM C-AXIS: 0.001 &ACIRC;&DEG; COUNTER SPINDLE: SPEED: 12.000 RPM POWER: 3,4 KW WORKPIECE DIAMETER (MAXIMUM): 21 MM CLAMPING DEPTH WORKPIECE (MAXIMUM): 180 MM CLAMPING PRESSURE (MAX.): 30 BAR TOOL CARRIER I (X/Y/Z): TECHNOLOGY: TURRET WITH 8 STATIONS TOOL HOLDER: TRAUB &ATILDE;&CEDIL;45 MM DRIVEN TOOLS: 12.000 RPM, 3,4 KW TRAVERSE PATH X/Y/Z AXIS: 120/65/250 MM RAPID TRAVERSE X/Y/Z AXIS: 20/20/40 M / MIN TOOL CARRIER II (X/Y/Z): TECHNOLOGY: REVOLVERS WITH 7 STATIONS + COUNTER SPINDLE TOOL HOLDER: TRAUB &ATILDE;&CEDIL;45 MM DRIVEN TOOLS: 12.000 RPM, 3,4 KW TRAVERSE PATH X/Y/Z AXIS: 120/60/250 MM RAPID TRAVERSE X/Y/Z AXIS: 20/20/40 M / MIN EQUIPMENT / ACCESSORIES: MEASURING SYSTEM: ENGINE MEASURING SYSTEM SP&ATILDE;&CURREN;NEMANGEMENT: CHIP CONVEYOR COOLANT SUPPLY: INTERNAL COOLING SYSTEM WITH PAPER BAND FILTER, 30 BAR RAW MATERIAL SUPPLY: ROD LOADER, FMB MINIMAG 20/1600 PRECAST DRAINAGE: GRAB WITH CONVEYOR BELT OIL MIST EXTRACTION: MECHANICAL SEPARATOR, FABR. B&ATILDE;&FRAC14;CHEL FIRE EXTINGUISHER: POWER + BAUER NETWORK CONNECTION: PREPARING TOOL HOLDER: DIV. HOLDER
Vendedor: G+S Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-make: traub<br/>type of machine: tns 32<br/> MAKE: TRAUB
TYPE OF MACHINE: TNS 32
Vendedor: Erdmann Export-Import
Año de construcción: usado
Ubicación: Land-1995
machine ce
400x280x400 races
iso 40
16 tool places
8000 rpm
rapid 30 m / min
power 5 kw
cnc fanuc 0-m
evacuator chips
equipment in top condition 1995 MACHINE CE 400X280X400 RACES ISO 40 16 TOOL PLACES 8000 RPM RAPID 30 M / MIN POWER 5 KW CNC FANUC 0-M EVACUATOR CHIPS EQUIPMENT IN TOP CONDITION
Vendedor: Industrialbay
Año de construcción: usado
Precio: 649 €
Ubicación: Land-de Germany, 46325 Borken
Vendedor: Komplett-Konzept Verwertungs GmbH
Año de construcción: usado
Ubicación: Land-there are two identical machines available, spindle opening: 42mm, number of tool slots: 12, turning diameter: 180mm, max. swing: 450mm, turning length: 490mm, connected load: 39kw, controls: traub tx 8 d, length: 3200mm, width: 2200mm, height: 1900mm, weight: 4t, year of construction machine 1/ 2: 1986/ 1990, documentation available.  THERE ARE TWO IDENTICAL MACHINES AVAILABLE, SPINDLE OPENING: 42MM, NUMBER OF TOOL SLOTS: 12, TURNING DIAMETER: 180MM, MAX. SWING: 450MM, TURNING LENGTH: 490MM, CONNECTED LOAD: 39KW, CONTROLS: TRAUB TX 8 D, LENGTH: 3200MM, WIDTH: 2200MM, HEIGHT: 1900MM, WEIGHT: 4T, YEAR OF CONSTRUCTION MACHINE 1/ 2: 1986/ 1990, DOCUMENTATION AVAILABLE.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-max. machining diameter: 12,7 mm<br/>max. machining length: 130 mm<br/>control: tx 8i <br/>main spindle::  <br/>turning speed range - main spindle: 0 - 12.000 min/-1<br/>power capacity - main spindel: 4,0 / 2,5 kw<br/>max. torque: 7 nm<br/>spindle bearing diameter: 35 mm<br/>max. bar capacity: 12,7 mm<br/>c-axis: 0,001 °<br/>subspindle::  <br/>spindle speed range subspindle: 0 - 12.000 min/-1<br/>power capacity - sub spindle: 4,0 / 2,5 kw<br/>max. torque: 7 nm<br/>c-axis: 0,001 °<br/>turret::  <br/>number of toolpositions: 6 pos.<br/>shank diameter: 12 x 12 mm<br/>number of driven toolspositions: 6 pos.<br/>spindle speed - driven tool stations: 0 - 8.000 min -1<br/>power capacity driven tool-stations: 1,5 / 0,9 kw<br/>max. torque: 2,4 nm<br/>turret 2::  <br/>number of toolpositions: 6 pos.<br/>shank diameter: 12 x 12 mm<br/>number of driven toolspositions: 6 pos.<br/>spindle speed - driven tool stations: 0 - 8.000 min -1<br/>power capacity driven tool-stations: 1,5 / 0,9 kw<br/>max. torque: 2,4 nm<br/>backside processing::  <br/>number of fixed tools: 3 pos<br/>shank diameter: 20 mm<br/>number of driven toolspositions: 4 pos.<br/>shank diameter: 28 mm<br/>axis stroke::  <br/>x-axis: 1/2: 35 / 4: 39 mm<br/>y-axis: 37,5 (-9,5/+28) mm<br/>z-axis: 2: 50 / 3: 80 mm<br/>feeds::  <br/>rapid traverse ( x / y / z ): 15 / 15 / 30 m/min<br/>rapid traverse: c: 0 - 100 1/min<br/>feed speeds: x: max. 7.500 mm/min<br/>feed speeds: y: max. 7.500 mm/min<br/>feed speeds: z: max. 10.000 mm/min<br/>total power requirement: 18 kw<br/>weight of the machine ca.: 2,0 t<br/>dimensions of the machine ca.: 7,0 x 2,5 x 2,3 m<br/>documents:  <br/>chip conveyor:  <br/>bar feeder: fmb minimag <br/>coolantsystem:  <br/>tool drive mechanisum:  <br/>cnc - bar automatic lathe<br/>traub - tnl 12/7<br/><br/>- incl. barfeeder fmb minimag<br/><br/><br/><br/><br/> MAX. MACHINING DIAMETER: 12,7 MM
MAX. MACHINING LENGTH: 130 MM
CONTROL: TX 8I
MAIN SPINDLE::
TURNING SPEED RANGE - MAIN SPINDLE: 0 - 12.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 4,0 / 2,5 KW
MAX. TORQUE: 7 NM
SPINDLE BEARING DIAMETER: 35 MM
MAX. BAR CAPACITY: 12,7 MM
C-AXIS: 0,001 °
SUBSPINDLE::
SPINDLE SPEED RANGE SUBSPINDLE: 0 - 12.000 MIN/-1
POWER CAPACITY - SUB SPINDLE: 4,0 / 2,5 KW
MAX. TORQUE: 7 NM
C-AXIS: 0,001 °
TURRET::
NUMBER OF TOOLPOSITIONS: 6 POS.
SHANK DIAMETER: 12 X 12 MM
NUMBER OF DRIVEN TOOLSPOSITIONS: 6 POS.
SPINDLE SPEED - DRIVEN TOOL STATIONS: 0 - 8.000 MIN -1
POWER CAPACITY DRIVEN TOOL-STATIONS: 1,5 / 0,9 KW
MAX. TORQUE: 2,4 NM
TURRET 2::
NUMBER OF TOOLPOSITIONS: 6 POS.
SHANK DIAMETER: 12 X 12 MM
NUMBER OF DRIVEN TOOLSPOSITIONS: 6 POS.
SPINDLE SPEED - DRIVEN TOOL STATIONS: 0 - 8.000 MIN -1
POWER CAPACITY DRIVEN TOOL-STATIONS: 1,5 / 0,9 KW
MAX. TORQUE: 2,4 NM
BACKSIDE PROCESSING::
NUMBER OF FIXED TOOLS: 3 POS
SHANK DIAMETER: 20 MM
NUMBER OF DRIVEN TOOLSPOSITIONS: 4 POS.
SHANK DIAMETER: 28 MM
AXIS STROKE::
X-AXIS: 1/2: 35 / 4: 39 MM
Y-AXIS: 37,5 (-9,5/+28) MM
Z-AXIS: 2: 50 / 3: 80 MM
FEEDS::
RAPID TRAVERSE ( X / Y / Z ): 15 / 15 / 30 M/MIN
RAPID TRAVERSE: C: 0 - 100 1/MIN
FEED SPEEDS: X: MAX. 7.500 MM/MIN
FEED SPEEDS: Y: MAX. 7.500 MM/MIN
FEED SPEEDS: Z: MAX. 10.000 MM/MIN
TOTAL POWER REQUIREMENT: 18 KW
WEIGHT OF THE MACHINE CA.: 2,0 T
DIMENSIONS OF THE MACHINE CA.: 7,0 X 2,5 X 2,3 M
DOCUMENTS:
CHIP CONVEYOR:
BAR FEEDER: FMB MINIMAG
COOLANTSYSTEM:
TOOL DRIVE MECHANISUM:
CNC - BAR AUTOMATIC LATHE
TRAUB - TNL 12/7

- INCL. BARFEEDER FMB MINIMAG




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-control tx 8i
bar diameter 12 mm
turning length 130 mm
main / sub spindle
spindle speed 12000 1 / min
6-station turrer with driven tools
y-axis
front- /back apparatur with 4 driven station each
bar loader fmb minimag 18   CONTROL TX 8I BAR DIAMETER 12 MM TURNING LENGTH 130 MM MAIN / SUB SPINDLE SPINDLE SPEED 12000 1 / MIN 6-STATION TURRER WITH DRIVEN TOOLS Y-AXIS FRONT- /BACK APPARATUR WITH 4 DRIVEN STATION EACH BAR LOADER FMB MINIMAG 18
Vendedor: WMH24
Año de construcción: usado
Ubicación: Land-turning diameter: max. 240 mm<br/>turning length: 630 mm<br/>control: traub tx 8d <br/>swing diameter above cross guideway: 450 mm<br/>swing dia. over traverse guideway: 320 mm<br/>main spindle::  <br/>max. rpm: 4.000 min/-1<br/>power capacity - main spindel: 42 kw<br/>max. torque: 270 nm<br/>max. bar capacity: 80 mm<br/>spindle head: kka-8  din 55026<br/>spindle bearing diameter: 130 mm<br/>c-axis: 2,5 °<br/>input unit: 0,001 °<br/>max. chucking diameter: 250 mm<br/>turret::  <br/>number of toolpositions: 12 pos.<br/>number of driven toolspositions: 6 pos.<br/>shank diameter: din 69880: 40 x 63 mm<br/>turret change time: 0,6 / 0,15 sec.<br/>spindle speed - driven tool stations: max. 5.000 min -1<br/>power capacity driven tool-stations: 1,8 / 4,5 kw<br/>turret 2::  <br/>number of toolpositions: 8 pos.<br/>number of driven toolspositions: 4 pos.<br/>shank diameter: din 69880: 40 x 63 mm<br/>turret change time: 0,6 / 0,15 sec.<br/>spindle speed - driven tool stations: max. 5.000 min -1<br/>power capacity driven tool-stations: 1,0 / 2,5 kw<br/>backside processing::  <br/>number of toolpositions: 4 pos.<br/>number of driven toolspositions: 4 pos.<br/>shank diameter: din 69880: 40 x 63 mm<br/>turret change time: 0,6 / 0,3 sec.<br/>swing dia.: max. 330 mm<br/>spindle speed - driven tool stations: max. 5.000 min -1<br/>power capacity driven tool-stations: 1,0 / 2,5 kw<br/>subspindle::  <br/>max. rpm: 5.000 min/-1<br/>clamping diameter: 80 / 100 mm<br/>feeds::  <br/>rapid traverse: x: 10 / z: 15 m/min<br/>feed speeds: max. 10.000 mm/min<br/>feed power: x: 4 / z: 8 kn<br/>rapid traverse: c: max. 130 min/-1<br/>axis stroke::  <br/>x-axis: 1: 185 / 2: 175 mm<br/>z-axis: 630 mm<br/>total power requirement: 57 kw<br/>weight of the machine ca.: 6,25 t<br/>dimensions of the machine ca.: 8,5 x 2,5 x 2,2 m<br/>documents:  <br/>chip conveyor:  <br/>coolantsystem:  <br/>high pressure coolant:  <br/>parts catcher: ( defect ) <br/>signal-light:  <br/>subspindle:  <br/>back-machining:  <br/>bar feeder interface:  <br/>bar feeder: lns 80 hs <br/>guide channels: 36,44,52,60,68,76,80 mm <br/>turret: 3x <br/>tool drive mechanisum:  <br/>c-axis: 0,001° <br/>hydraulic system:  <br/>collet chuck: 185 e / 19 de <br/>div. collets:  <br/>div. tool holder:  <br/>driven tools: 2x x / 3x z <br/>tool setting: atc <br/>subspindle: ersatz / compensatory <br/>cnc - turning- and millingcenter<br/>traub - tns 65/80 d<br/><br/><br/><br/><br/> TURNING DIAMETER: MAX. 240 MM
TURNING LENGTH: 630 MM
CONTROL: TRAUB TX 8D
SWING DIAMETER ABOVE CROSS GUIDEWAY: 450 MM
SWING DIA. OVER TRAVERSE GUIDEWAY: 320 MM
MAIN SPINDLE::
MAX. RPM: 4.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 42 KW
MAX. TORQUE: 270 NM
MAX. BAR CAPACITY: 80 MM
SPINDLE HEAD: KKA-8 DIN 55026
SPINDLE BEARING DIAMETER: 130 MM
C-AXIS: 2,5 °
INPUT UNIT: 0,001 °
MAX. CHUCKING DIAMETER: 250 MM
TURRET::
NUMBER OF TOOLPOSITIONS: 12 POS.
NUMBER OF DRIVEN TOOLSPOSITIONS: 6 POS.
SHANK DIAMETER: DIN 69880: 40 X 63 MM
TURRET CHANGE TIME: 0,6 / 0,15 SEC.
SPINDLE SPEED - DRIVEN TOOL STATIONS: MAX. 5.000 MIN -1
POWER CAPACITY DRIVEN TOOL-STATIONS: 1,8 / 4,5 KW
TURRET 2::
NUMBER OF TOOLPOSITIONS: 8 POS.
NUMBER OF DRIVEN TOOLSPOSITIONS: 4 POS.
SHANK DIAMETER: DIN 69880: 40 X 63 MM
TURRET CHANGE TIME: 0,6 / 0,15 SEC.
SPINDLE SPEED - DRIVEN TOOL STATIONS: MAX. 5.000 MIN -1
POWER CAPACITY DRIVEN TOOL-STATIONS: 1,0 / 2,5 KW
BACKSIDE PROCESSING::
NUMBER OF TOOLPOSITIONS: 4 POS.
NUMBER OF DRIVEN TOOLSPOSITIONS: 4 POS.
SHANK DIAMETER: DIN 69880: 40 X 63 MM
TURRET CHANGE TIME: 0,6 / 0,3 SEC.
SWING DIA.: MAX. 330 MM
SPINDLE SPEED - DRIVEN TOOL STATIONS: MAX. 5.000 MIN -1
POWER CAPACITY DRIVEN TOOL-STATIONS: 1,0 / 2,5 KW
SUBSPINDLE::
MAX. RPM: 5.000 MIN/-1
CLAMPING DIAMETER: 80 / 100 MM
FEEDS::
RAPID TRAVERSE: X: 10 / Z: 15 M/MIN
FEED SPEEDS: MAX. 10.000 MM/MIN
FEED POWER: X: 4 / Z: 8 KN
RAPID TRAVERSE: C: MAX. 130 MIN/-1
AXIS STROKE::
X-AXIS: 1: 185 / 2: 175 MM
Z-AXIS: 630 MM
TOTAL POWER REQUIREMENT: 57 KW
WEIGHT OF THE MACHINE CA.: 6,25 T
DIMENSIONS OF THE MACHINE CA.: 8,5 X 2,5 X 2,2 M
DOCUMENTS:
CHIP CONVEYOR:
COOLANTSYSTEM:
HIGH PRESSURE COOLANT:
PARTS CATCHER: ( DEFECT )
SIGNAL-LIGHT:
SUBSPINDLE:
BACK-MACHINING:
BAR FEEDER INTERFACE:
BAR FEEDER: LNS 80 HS
GUIDE CHANNELS: 36,44,52,60,68,76,80 MM
TURRET: 3X
TOOL DRIVE MECHANISUM:
C-AXIS: 0,001°
HYDRAULIC SYSTEM:
COLLET CHUCK: 185 E / 19 DE
DIV. COLLETS:
DIV. TOOL HOLDER:
DRIVEN TOOLS: 2X X / 3X Z
TOOL SETTING: ATC
SUBSPINDLE: ERSATZ / COMPENSATORY
CNC - TURNING- AND MILLINGCENTER
TRAUB - TNS 65/80 D




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-2 x lathe traub tnd 360
traub1 is year 1986, traub2 is built in 1985. the equipment of the machines is the same.
traub2 is in full production. 
eeoctlm
traub1 has stopped with error 04 "ram error" three days ago. since we get the replacement lathe on tuesday of next week, we have no longer bothered us, to repair the error.
traub2 should be replaced in 2-3 months. 2 X LATHE TRAUB TND 360 TRAUB1 IS YEAR 1986, TRAUB2 IS BUILT IN 1985. THE EQUIPMENT OF THE MACHINES IS THE SAME. TRAUB2 IS IN FULL PRODUCTION. EEOCTLM TRAUB1 HAS STOPPED WITH ERROR 04 "RAM ERROR" THREE DAYS AGO. SINCE WE GET THE REPLACEMENT LATHE ON TUESDAY OF NEXT WEEK, WE HAVE NO LONGER BOTHERED US, TO REPAIR THE ERROR. TRAUB2 SHOULD BE REPLACED IN 2-3 MONTHS.
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-max. bar capacity: 32 mm<br/>z-axis: max. 305 mm<br/>control: system tx 8i-p <br/>main spindle::  <br/>max. rpm: 8.000 min/-1<br/>power capacity - main spindel: 6,7 / 10,7 kw<br/>max. torque: 21 / 32 nm<br/>max. bar capacity: 32 mm<br/>c-axis: 0,001 °<br/>turret 1::  <br/>number of toolpositions: 10 pos.<br/>number of driven toolspositions: 10 pos.<br/>spindle speed - driven tool stations: max. 12.000 min -1<br/>power capacity driven tool-stations: 1,5 / 2,5 kw<br/>taper diameter: 45 mm<br/>turning tool - shaft cross cut: 16 x 16 mm<br/>x-axis: 140 mm<br/>z-axis: 305 mm<br/>h-axis: 0,001 °<br/>change-time chip to chip: ca. 0,3 sec<br/>turret 2::  <br/>number of toolpositions: 9 pos.<br/>number of driven toolspositions: 9 pos.<br/>spindle speed - driven tool stations: max. 12.000 min -1<br/>power capacity driven tool-stations: 1,5 / 2,5 kw<br/>taper diameter: 45 mm<br/>turning tool - shaft cross cut: 16 x 16 mm<br/>x-axis: 140 mm<br/>y-axis: -25 / +40 mm<br/>z-axis: 320 mm<br/>change-time chip to chip: ca. 0,3 sec<br/>subspindle::  <br/>max. rpm: 8.000 min/-1<br/>power capacity - sub spindle: 1,5 / 2,5 kw<br/>max. torque: 4,5 / 7,7 nm<br/>c-axis: 0,001 °<br/>clamping length: max. 250 mm<br/>bar material dia.: max. 32 mm<br/>backside processing::  <br/>number of toolpositions: 8 pos.<br/>number of driven toolspositions: 3 pos.<br/>spindle speed - driven tool stations: max. 12.000 min -1<br/>power capacity - driven tool-stations: 1,5 / 2,5 kw<br/>taper diameter: 36 mm<br/>feeds::  <br/>rapid traverse ( x / y / z ): 20 / 20 / 20 m/min<br/>feed speeds: max. 20.000 mm/min<br/>total power requirement: 46 kw<br/>weight of the machine ca.: 6,0 t<br/>dimensions of the machine ca.: 4,5 (8,0) x 2,5 x 2,6 m<br/>documents:  <br/>chip conveyor:  <br/>coolantsystem:  <br/>turret: 2x <br/>subspindle:  <br/>back-machining:  <br/>tool drive mechanisum:  <br/>bar feeder interface:  <br/>hydraulic system:  <br/>elektr. hand wheel:  <br/>parts catcher:  <br/>parts removal:  <br/>cnc - longitudinal bar automatic lathe<br/>traub - tnl 32 p<br/><br/>- main- and subspindle<br/>- two turrets<br/>- tool-drive<br/>- optional with surcharge: bar-feeder lns hydrobar express 332 s2 / 3m<br/>- ca. 10.000h operating-hours<br/><br/><br/><br/><br/> MAX. BAR CAPACITY: 32 MM
Z-AXIS: MAX. 305 MM
CONTROL: SYSTEM TX 8I-P
MAIN SPINDLE::
MAX. RPM: 8.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 6,7 / 10,7 KW
MAX. TORQUE: 21 / 32 NM
MAX. BAR CAPACITY: 32 MM
C-AXIS: 0,001 °
TURRET 1::
NUMBER OF TOOLPOSITIONS: 10 POS.
NUMBER OF DRIVEN TOOLSPOSITIONS: 10 POS.
SPINDLE SPEED - DRIVEN TOOL STATIONS: MAX. 12.000 MIN -1
POWER CAPACITY DRIVEN TOOL-STATIONS: 1,5 / 2,5 KW
TAPER DIAMETER: 45 MM
TURNING TOOL - SHAFT CROSS CUT: 16 X 16 MM
X-AXIS: 140 MM
Z-AXIS: 305 MM
H-AXIS: 0,001 °
CHANGE-TIME CHIP TO CHIP: CA. 0,3 SEC
TURRET 2::
NUMBER OF TOOLPOSITIONS: 9 POS.
NUMBER OF DRIVEN TOOLSPOSITIONS: 9 POS.
SPINDLE SPEED - DRIVEN TOOL STATIONS: MAX. 12.000 MIN -1
POWER CAPACITY DRIVEN TOOL-STATIONS: 1,5 / 2,5 KW
TAPER DIAMETER: 45 MM
TURNING TOOL - SHAFT CROSS CUT: 16 X 16 MM
X-AXIS: 140 MM
Y-AXIS: -25 / +40 MM
Z-AXIS: 320 MM
CHANGE-TIME CHIP TO CHIP: CA. 0,3 SEC
SUBSPINDLE::
MAX. RPM: 8.000 MIN/-1
POWER CAPACITY - SUB SPINDLE: 1,5 / 2,5 KW
MAX. TORQUE: 4,5 / 7,7 NM
C-AXIS: 0,001 °
CLAMPING LENGTH: MAX. 250 MM
BAR MATERIAL DIA.: MAX. 32 MM
BACKSIDE PROCESSING::
NUMBER OF TOOLPOSITIONS: 8 POS.
NUMBER OF DRIVEN TOOLSPOSITIONS: 3 POS.
SPINDLE SPEED - DRIVEN TOOL STATIONS: MAX. 12.000 MIN -1
POWER CAPACITY - DRIVEN TOOL-STATIONS: 1,5 / 2,5 KW
TAPER DIAMETER: 36 MM
FEEDS::
RAPID TRAVERSE ( X / Y / Z ): 20 / 20 / 20 M/MIN
FEED SPEEDS: MAX. 20.000 MM/MIN
TOTAL POWER REQUIREMENT: 46 KW
WEIGHT OF THE MACHINE CA.: 6,0 T
DIMENSIONS OF THE MACHINE CA.: 4,5 (8,0) X 2,5 X 2,6 M
DOCUMENTS:
CHIP CONVEYOR:
COOLANTSYSTEM:
TURRET: 2X
SUBSPINDLE:
BACK-MACHINING:
TOOL DRIVE MECHANISUM:
BAR FEEDER INTERFACE:
HYDRAULIC SYSTEM:
ELEKTR. HAND WHEEL:
PARTS CATCHER:
PARTS REMOVAL:
CNC - LONGITUDINAL BAR AUTOMATIC LATHE
TRAUB - TNL 32 P

- MAIN- AND SUBSPINDLE
- TWO TURRETS
- TOOL-DRIVE
- OPTIONAL WITH SURCHARGE: BAR-FEEDER LNS HYDROBAR EXPRESS 332 S2 / 3M
- CA. 10.000H OPERATING-HOURS




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land--bar passage of 5-42 mm,
-side loading system
-was built at traub tnc 65
-some ducts,
-material gate d26, 28, 32, 36, 40, 42
-some voschubzangen, - max rod length 3,200 mm,.
-weight approx. 900 kg
-dimensions lxw 4,060 mm x 810 mm, adjustable,
 -BAR PASSAGE OF 5-42 MM, -SIDE LOADING SYSTEM -WAS BUILT AT TRAUB TNC 65 -SOME DUCTS, -MATERIAL GATE D26, 28, 32, 36, 40, 42 -SOME VOSCHUBZANGEN, - MAX ROD LENGTH 3,200 MM,. -WEIGHT APPROX. 900 KG -DIMENSIONS LXW 4,060 MM X 810 MM, ADJUSTABLE,
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Ubicación: Land-tool taper: 0 <br/>shaft cross cut: 30.00 <br/>tool taper: 32x1,5 schrägverzahnt <br/>ratio:  <br/>turning speeds:  u/min<br/>: li. und re. <br/>coolant: ek <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> TOOL TAPER: 0
SHAFT CROSS CUT: 30.00
TOOL TAPER: 32X1,5 SCHRäGVERZAHNT
RATIO:
TURNING SPEEDS: U/MIN
: LI. UND RE.
COOLANT: EK
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 3.900 €
Ubicación: Land--bar passage of 5-42 mm,
-side loading system
-was built at traub tnc 65
-some ducts,
-material gate d26, 28, 32, 36, 40, 42
-some voschubzangen, - max rod length 3,200 mm,.
-weight approx. 900 kg
-dimensions lxw 4,060 mm x 810 mm, adjustable, -BAR PASSAGE OF 5-42 MM, -SIDE LOADING SYSTEM -WAS BUILT AT TRAUB TNC 65 -SOME DUCTS, -MATERIAL GATE D26, 28, 32, 36, 40, 42 -SOME VOSCHUBZANGEN, - MAX ROD LENGTH 3,200 MM,. -WEIGHT APPROX. 900 KG -DIMENSIONS LXW 4,060 MM X 810 MM, ADJUSTABLE,
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Ubicación: Land-tool taper: er20 <br/>shaft cross cut: 30.00 <br/>tool taper: 32x1,5 schrägverzahnt <br/>ratio: 1:1 <br/>turning speeds: 4000 u/min<br/>: li. und re. <br/>coolant: ek <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> TOOL TAPER: ER20
SHAFT CROSS CUT: 30.00
TOOL TAPER: 32X1,5 SCHRäGVERZAHNT
RATIO: 1:1
TURNING SPEEDS: 4000 U/MIN
: LI. UND RE.
COOLANT: EK
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 280 €
Ubicación: Land-there are two used stainless steel trolleys for puller for sale.
- with 10 shelves
- dimensions: width: 2,04m, depth: 0,60m, height: 1,98m
- distance between the brackets: 1,94m
- the angle pad width: 3cm

price per trolley: 280,--€ excl. vat, ex stock straubenhardt (germany) 
 THERE ARE TWO USED STAINLESS STEEL TROLLEYS FOR PULLER FOR SALE. - WITH 10 SHELVES - DIMENSIONS: WIDTH: 2,04M, DEPTH: 0,60M, HEIGHT: 1,98M - DISTANCE BETWEEN THE BRACKETS: 1,94M - THE ANGLE PAD WIDTH: 3CM PRICE PER TROLLEY: 280,--€ EXCL. VAT, EX STOCK STRAUBENHARDT (GERMANY)
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Ubicación: Land-tool taper: 0 <br/>shaft cross cut: 30.00 <br/>tool taper: 32x1,5 schrägverzahnt <br/>ratio:  <br/>turning speeds:  u/min<br/>: li. und re. <br/>coolant: ek <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> TOOL TAPER: 0
SHAFT CROSS CUT: 30.00
TOOL TAPER: 32X1,5 SCHRäGVERZAHNT
RATIO:
TURNING SPEEDS: U/MIN
: LI. UND RE.
COOLANT: EK
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-traub system tx-7 control
built in 1985-1987
power chuck
travel x/z 375/485 mm.
revolver 16 x,
spindle rpm to 5,000 rpm,
turning length 500 mm
rotation ã? 375 mm,.
main drive kw 27,.
spindle bore 60 mm,.
rapid traverse x/z 10/15 m,.
tailstock,
quill stroke 130 mm,.
tailstock travel 550 mm,
sell a well-preserved machine which works perfectly.
there are tools, tool holders, wendeplaten
 TRAUB SYSTEM TX-7 CONTROL BUILT IN 1985-1987 POWER CHUCK TRAVEL X/Z 375/485 MM. REVOLVER 16 X, SPINDLE RPM TO 5,000 RPM, TURNING LENGTH 500 MM ROTATION &ATILDE;? 375 MM,. MAIN DRIVE KW 27,. SPINDLE BORE 60 MM,. RAPID TRAVERSE X/Z 10/15 M,. TAILSTOCK, QUILL STROKE 130 MM,. TAILSTOCK TRAVEL 550 MM, SELL A WELL-PRESERVED MACHINE WHICH WORKS PERFECTLY. THERE ARE TOOLS, TOOL HOLDERS, WENDEPLATEN
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-tool taper: 0 <br/>shaft cross cut: 30.00 <br/>tool taper: 32x1,5 schrägverzahnt <br/>ratio:  <br/>turning speeds:  u/min<br/>: li. und re. <br/>coolant: ek <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> TOOL TAPER: 0
SHAFT CROSS CUT: 30.00
TOOL TAPER: 32X1,5 SCHRäGVERZAHNT
RATIO:
TURNING SPEEDS: U/MIN
: LI. UND RE.
COOLANT: EK
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-the machine is in good technical condition, the possibility of testing, by prior arrangement. 2 spindles with clamping tongs recording up to 65 mm bar diameter 14 positioning tool head with driven tools THE MACHINE IS IN GOOD TECHNICAL CONDITION, THE POSSIBILITY OF TESTING, BY PRIOR ARRANGEMENT. 2 SPINDLES WITH CLAMPING TONGS RECORDING UP TO 65 MM BAR DIAMETER 14 POSITIONING TOOL HEAD WITH DRIVEN TOOLS
Vendedor: CEE-Machines
Año de construcción: usado
Ubicación: Land-tool taper: 0 <br/>shaft cross cut: 30.00 <br/>tool taper: 32x1,5 schrägverzahnt <br/>ratio:  <br/>turning speeds:  u/min<br/>: li. und re. <br/>coolant: ek <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>this is an angled drilling and milling head for a traub tns 40/42.<br/>price new: 2000 euros<br/><br/><br/><br/><br/> TOOL TAPER: 0
SHAFT CROSS CUT: 30.00
TOOL TAPER: 32X1,5 SCHRäGVERZAHNT
RATIO:
TURNING SPEEDS: U/MIN
: LI. UND RE.
COOLANT: EK
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
THIS IS AN ANGLED DRILLING AND MILLING HEAD FOR A TRAUB TNS 40/42.
PRICE NEW: 2000 EUROS




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-connected load: 2.2kw, including bar loading magazine iemca as 325/ 32: max. bar length: 3000mm.  CONNECTED LOAD: 2.2KW, INCLUDING BAR LOADING MAGAZINE IEMCA AS 325/ 32: MAX. BAR LENGTH: 3000MM.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-tool taper: 0 <br/>shaft cross cut: 30.00 <br/>tool taper: 32x1,5 schrägverzahnt <br/>ratio: 1 : 1 <br/>turning speeds: 4000 u/min<br/>: li. und re. <br/>coolant: ek <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> TOOL TAPER: 0
SHAFT CROSS CUT: 30.00
TOOL TAPER: 32X1,5 SCHRäGVERZAHNT
RATIO: 1 : 1
TURNING SPEEDS: 4000 U/MIN
: LI. UND RE.
COOLANT: EK
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-swing over bed: 680 mm maximum turning length: 1000 mm max turning diameter: 440 mm maximum spindle speed: 2800 rpm.
the machine is in good technical condition, the possibility of testing, by prior arrangement. SWING OVER BED: 680 MM MAXIMUM TURNING LENGTH: 1000 MM MAX TURNING DIAMETER: 440 MM MAXIMUM SPINDLE SPEED: 2800 RPM. THE MACHINE IS IN GOOD TECHNICAL CONDITION, THE POSSIBILITY OF TESTING, BY PRIOR ARRANGEMENT.
Vendedor: CEE-Machines
Año de construcción: usado
Ubicación: Land-tool taper: 0 <br/>shaft cross cut: 0 <br/>tool taper:  <br/>ratio:  <br/>turning speeds:  u/min<br/>:  <br/>coolant:  <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> TOOL TAPER: 0
SHAFT CROSS CUT: 0
TOOL TAPER:
RATIO:
TURNING SPEEDS: U/MIN
:
COOLANT:
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-overview:
brand: traub
model: tnc 42
application type: turning
machine type: lathe
availability: immediately
construction year: 2004
production hours: 41067
location: italy
origin country: germany

general data:
measurements width: 4250 mm
measurements depth: 2800 mm
measurements height: 1917 mm
machine weight: 4800 kg

main drive:
number of spindle: 2
spindle speed range: 5600 1/min

control unit:
brand: traub
model: system tx 8h

movement:
x-axis movement: 140 mm
y-axis movement: ±35 mm
z-axis movement: 450 mm

workpiece:
workpiece drm: 192 mm
workpiece x: 140 mm
workpiece y: 450 mm

turret:
number of turrets: 2

media:
main electronic connection: 400 v /50 hz
power consumption: 18.5 kva
chip conveyer: yes
internal cooling: yes

additional equipment:
1-	33 tool holders capto (sandwik)
2-	1 motorized traub
3-	2 hidraulic clamps (hainbuch)
4-	1 self-centering tool (rohm)
5-	1 clamp holder (hainbuch)
6-	1 workpiece chucks (schunk)
7-	high pressure pump


see full technical specifications of this machine at:
abc://bit.ly/2qnuh6k OVERVIEW: BRAND: TRAUB MODEL: TNC 42 APPLICATION TYPE: TURNING MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY CONSTRUCTION YEAR: 2004 PRODUCTION HOURS: 41067 LOCATION: ITALY ORIGIN COUNTRY: GERMANY GENERAL DATA: MEASUREMENTS WIDTH: 4250 MM MEASUREMENTS DEPTH: 2800 MM MEASUREMENTS HEIGHT: 1917 MM MACHINE WEIGHT: 4800 KG MAIN DRIVE: NUMBER OF SPINDLE: 2 SPINDLE SPEED RANGE: 5600 1/MIN CONTROL UNIT: BRAND: TRAUB MODEL: SYSTEM TX 8H MOVEMENT: X-AXIS MOVEMENT: 140 MM Y-AXIS MOVEMENT: ±35 MM Z-AXIS MOVEMENT: 450 MM WORKPIECE: WORKPIECE DRM: 192 MM WORKPIECE X: 140 MM WORKPIECE Y: 450 MM TURRET: NUMBER OF TURRETS: 2 MEDIA: MAIN ELECTRONIC CONNECTION: 400 V /50 HZ POWER CONSUMPTION: 18.5 KVA CHIP CONVEYER: YES INTERNAL COOLING: YES ADDITIONAL EQUIPMENT: 1- 33 TOOL HOLDERS CAPTO (SANDWIK) 2- 1 MOTORIZED TRAUB 3- 2 HIDRAULIC CLAMPS (HAINBUCH) 4- 1 SELF-CENTERING TOOL (ROHM) 5- 1 CLAMP HOLDER (HAINBUCH) 6- 1 WORKPIECE CHUCKS (SCHUNK) 7- HIGH PRESSURE PUMP SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2QNUH6K
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-tool taper: 0 <br/>shaft cross cut: 30.00 <br/>tool taper: 32x1,5 schrägverzahnt <br/>ratio:  <br/>turning speeds:  u/min<br/>: li. und re. <br/>coolant: ek <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> TOOL TAPER: 0
SHAFT CROSS CUT: 30.00
TOOL TAPER: 32X1,5 SCHRäGVERZAHNT
RATIO:
TURNING SPEEDS: U/MIN
: LI. UND RE.
COOLANT: EK
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-overview:
brand: traub
model: tnc 42
application type: turning
machine type: lathe
availability: immediately
construction year: 2003
production hours: 42050
location: italy
origin country: germany

general data:
measurements width: 4250 mm
measurements depth: 2800 mm
measurements height: 1917 mm
machine weight: 4800 kg

main drive:
number of spindle: 2
spindle speed range: 5600 1/min

control unit:
brand: traub
model: system tx 8h

movement:
x-axis movement: 140 mm
y-axis movement: ±35 mm
z-axis movement: 450 mm

workpiece:
workpiece drm: 192 mm
workpiece x: 140 mm
workpiece y: 450 mm

turret:
number of turrets: 2

media:
main electronic connection: 400 v /50 hz
power consumption: 18.5 kva
chip conveyer: yes
internal cooling: yes

additional equipment:
1-	33 tool holders capto (sandwik)
2-	1 motorized traub
3-	2 hidraulic clamps (hainbuch)
4-	1 self-centering tool (rohm)
5-	1 clamp holder (hainbuch)
6-	1 workpiece chucks (schunk)
7-	high pressure pump



see full technical specifications of this machine at:
abc://bit.ly/2pwhrbh
 OVERVIEW: BRAND: TRAUB MODEL: TNC 42 APPLICATION TYPE: TURNING MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY CONSTRUCTION YEAR: 2003 PRODUCTION HOURS: 42050 LOCATION: ITALY ORIGIN COUNTRY: GERMANY GENERAL DATA: MEASUREMENTS WIDTH: 4250 MM MEASUREMENTS DEPTH: 2800 MM MEASUREMENTS HEIGHT: 1917 MM MACHINE WEIGHT: 4800 KG MAIN DRIVE: NUMBER OF SPINDLE: 2 SPINDLE SPEED RANGE: 5600 1/MIN CONTROL UNIT: BRAND: TRAUB MODEL: SYSTEM TX 8H MOVEMENT: X-AXIS MOVEMENT: 140 MM Y-AXIS MOVEMENT: ±35 MM Z-AXIS MOVEMENT: 450 MM WORKPIECE: WORKPIECE DRM: 192 MM WORKPIECE X: 140 MM WORKPIECE Y: 450 MM TURRET: NUMBER OF TURRETS: 2 MEDIA: MAIN ELECTRONIC CONNECTION: 400 V /50 HZ POWER CONSUMPTION: 18.5 KVA CHIP CONVEYER: YES INTERNAL COOLING: YES ADDITIONAL EQUIPMENT: 1- 33 TOOL HOLDERS CAPTO (SANDWIK) 2- 1 MOTORIZED TRAUB 3- 2 HIDRAULIC CLAMPS (HAINBUCH) 4- 1 SELF-CENTERING TOOL (ROHM) 5- 1 CLAMP HOLDER (HAINBUCH) 6- 1 WORKPIECE CHUCKS (SCHUNK) 7- HIGH PRESSURE PUMP SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2PWHRBH
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-tool taper: 0 <br/>shaft cross cut: 30.00 <br/>tool taper: 32x1,5 schrägverzahnt <br/>ratio:  <br/>turning speeds:  u/min<br/>: li. und re. <br/>coolant: ek <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> TOOL TAPER: 0
SHAFT CROSS CUT: 30.00
TOOL TAPER: 32X1,5 SCHRäGVERZAHNT
RATIO:
TURNING SPEEDS: U/MIN
: LI. UND RE.
COOLANT: EK
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)