10 ofertas

Año de construcción: usado
Ubicación: Land-safety: 4 emergency stop buttons, emergency stop bars
gap adjustment: manual protection control
electric control: conventional protection control
  SAFETY: 4 EMERGENCY STOP BUTTONS, EMERGENCY STOP BARS GAP ADJUSTMENT: MANUAL PROTECTION CONTROL ELECTRIC CONTROL: CONVENTIONAL PROTECTION CONTROL
Vendedor: USD Gebrauchtmaschinen GmbH
Año de construcción: usado
Ubicación: Land-cold feed-pin type extruder

diameter 100 x 12d

description in the annex!  COLD FEED-PIN TYPE EXTRUDER DIAMETER 100 X 12D DESCRIPTION IN THE ANNEX!
Vendedor: Pelmar Engineering Germany GmbH
Año de construcción: usado
Ubicación: Land-troester extruder with cooling line and wind-up stations

see the description in the attachment! TROESTER EXTRUDER WITH COOLING LINE AND WIND-UP STATIONS SEE THE DESCRIPTION IN THE ATTACHMENT!
Vendedor: Pelmar Engineering Germany GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: paul troester maschinenfabrik/hannover
year of construction: 1978, machine was in operation until the end of 2015
screw diameter: 150 mm
length: 16 d (approx. 2,400 mm)
screw speed: 2.5-25 / 4 - 40 u/min.
centre height of the extruder: 1,100 mm
type of gearbox  3 th 990 k / 2s, 2 speeds.
gear ratio: = i1 16.5: 1 i2 = 26.4: 1
maximum gearbox output torque: 45,000 nm
maximum permissible injection pressure: 350 bar without limitation through the extrusion head.
the extruder will be overhauled and designed/changed  according to customer's specification. 
below pictures 1-4 show an extruder overhauled by us.

       MANUFACTURER: PAUL TROESTER MASCHINENFABRIK/HANNOVER YEAR OF CONSTRUCTION: 1978, MACHINE WAS IN OPERATION UNTIL THE END OF 2015 SCREW DIAMETER: 150 MM LENGTH: 16 D (APPROX. 2,400 MM) SCREW SPEED: 2.5-25 / 4 - 40 U/MIN. CENTRE HEIGHT OF THE EXTRUDER: 1,100 MM TYPE OF GEARBOX 3 TH 990 K / 2S, 2 SPEEDS. GEAR RATIO: = I1 16.5: 1 I2 = 26.4: 1 MAXIMUM GEARBOX OUTPUT TORQUE: 45,000 NM MAXIMUM PERMISSIBLE INJECTION PRESSURE: 350 BAR WITHOUT LIMITATION THROUGH THE EXTRUSION HEAD. THE EXTRUDER WILL BE OVERHAULED AND DESIGNED/CHANGED ACCORDING TO CUSTOMER'S SPECIFICATION. BELOW PICTURES 1-4 SHOW AN EXTRUDER OVERHAULED BY US.
Vendedor: K & K Industrievertretungen GmbH
Año de construcción: usado
Ubicación: Land-troester model wmx 20, 
manufactured in 1989
cylinder diameter: 600 mm, 
width of cylinders: 1800mm 
working length cylinders: 1600mm
periphery drilled rolls
lubrication of the gearbox by pressure with engine oil pump 
lubrication of the bearings by pressure with engine oil pump
variable cylinders speed 
individual drive
cylinder before adjustable v = 3.4 - 34 m/min
rear cylinder fixed v = 3.4 - 34 m/min 
the front and rear cylinders engine power: 100kw continuous current (per engine)
spacing of the adjustable cylinder (the cylinder front is adjustable)
system of temperature control of the cylinders by electric heaters - temperature for the heating and cooling control
installed heat output: 2 x 54 kw 
cooling power: 2 x 200,000 kcal/h
cooling water consumption: approx. 15 m 3/h
temperature control unit
plc siemens s5.
abcs://youtu.be/msaomuqd85o (nip guides) TROESTER MODEL WMX 20, MANUFACTURED IN 1989 CYLINDER DIAMETER: 600 MM, WIDTH OF CYLINDERS: 1800MM WORKING LENGTH CYLINDERS: 1600MM PERIPHERY DRILLED ROLLS LUBRICATION OF THE GEARBOX BY PRESSURE WITH ENGINE OIL PUMP LUBRICATION OF THE BEARINGS BY PRESSURE WITH ENGINE OIL PUMP VARIABLE CYLINDERS SPEED INDIVIDUAL DRIVE CYLINDER BEFORE ADJUSTABLE V = 3.4 - 34 M/MIN REAR CYLINDER FIXED V = 3.4 - 34 M/MIN THE FRONT AND REAR CYLINDERS ENGINE POWER: 100KW CONTINUOUS CURRENT (PER ENGINE) SPACING OF THE ADJUSTABLE CYLINDER (THE CYLINDER FRONT IS ADJUSTABLE) SYSTEM OF TEMPERATURE CONTROL OF THE CYLINDERS BY ELECTRIC HEATERS - TEMPERATURE FOR THE HEATING AND COOLING CONTROL INSTALLED HEAT OUTPUT: 2 X 54 KW COOLING POWER: 2 X 200,000 KCAL/H COOLING WATER CONSUMPTION: APPROX. 15 M 3/H TEMPERATURE CONTROL UNIT PLC SIEMENS S5. ABCS://YOUTU.BE/MSAOMUQD85O (NIP GUIDES)
Vendedor: Andrew Isaacs Machinery International Ltd
Año de construcción: usado
Ubicación: Land-year of construction: 1985,

screw diameter: 120 mm
extrusion length: 15/16 d

extruder with 5 temperature zones
used engine, make baumueller, 90 kw,

machine will be completely overhauled and made according to customer´s specification.
  YEAR OF CONSTRUCTION: 1985, SCREW DIAMETER: 120 MM EXTRUSION LENGTH: 15/16 D EXTRUDER WITH 5 TEMPERATURE ZONES USED ENGINE, MAKE BAUMUELLER, 90 KW, MACHINE WILL BE COMPLETELY OVERHAULED AND MADE ACCORDING TO CUSTOMER´S SPECIFICATION.
Vendedor: K & K Industrievertretungen GmbH
Año de construcción: usado
Ubicación: Land-3 roll calander include line

comforter
500 x 1200mm
type: inverted "l"
rolls are peripherally drilled
bearing: bush bearing
drive: bullgear
engine: available
electric: available (contactor control)
base frame: not available in concrete

conveyor belts
cooling drums
2 wind up station with s7 control 3 ROLL CALANDER INCLUDE LINE COMFORTER 500 X 1200MM TYPE: INVERTED "L" ROLLS ARE PERIPHERALLY DRILLED BEARING: BUSH BEARING DRIVE: BULLGEAR ENGINE: AVAILABLE ELECTRIC: AVAILABLE (CONTACTOR CONTROL) BASE FRAME: NOT AVAILABLE IN CONCRETE CONVEYOR BELTS COOLING DRUMS 2 WIND UP STATION WITH S7 CONTROL
Vendedor: Pelmar Engineering Germany GmbH
Año de construcción: usado
Ubicación: Land-rubber extruder gs 120/k-14d-m.spw.
strainer extruder up to 500 bar
new, temperature-controlled feed roll
hydraulic clamp with hose slit extrusion head
dc drive motor 64,5 kw
steel baseplate

the machine can be modified/overhauled according to customer\s specification. RUBBER EXTRUDER GS 120/K-14D-M.SPW. STRAINER EXTRUDER UP TO 500 BAR NEW, TEMPERATURE-CONTROLLED FEED ROLL HYDRAULIC CLAMP WITH HOSE SLIT EXTRUSION HEAD DC DRIVE MOTOR 64,5 KW STEEL BASEPLATE THE MACHINE CAN BE MODIFIED/OVERHAULED ACCORDING TO CUSTOMER\S SPECIFICATION.
Vendedor: K & K Industrievertretungen GmbH
Año de construcción: usado
Ubicación: Land-used troester rubber extruder type gsv 60/k-12-18 d with feed roll
can be modified/overhauled according to customer\s specification, with or without vacuum,
year of construction: 1991
machine was in operation until end of 2010.
including feed roll,
new drive with flat-gear motor
screw speed: maximum 62 rpm
motor power: 22 kw
plc control and tcu can be renewed, if requested.
  USED TROESTER RUBBER EXTRUDER TYPE GSV 60/K-12-18 D WITH FEED ROLL CAN BE MODIFIED/OVERHAULED ACCORDING TO CUSTOMER\S SPECIFICATION, WITH OR WITHOUT VACUUM, YEAR OF CONSTRUCTION: 1991 MACHINE WAS IN OPERATION UNTIL END OF 2010. INCLUDING FEED ROLL, NEW DRIVE WITH FLAT-GEAR MOTOR SCREW SPEED: MAXIMUM 62 RPM MOTOR POWER: 22 KW PLC CONTROL AND TCU CAN BE RENEWED, IF REQUESTED.
Vendedor: K & K Industrievertretungen GmbH
Año de construcción: usado
Ubicación: Land-450 x 1.200mm 
on a rubber-metal base plate 
currently it is dismantled, cleaned and primed
gearbox make seegers 
control cabinet and documentation available
year of construction: 1976
front roll was renewed in abt. 1986
drive power: 90 kw.
 450 X 1.200MM ON A RUBBER-METAL BASE PLATE CURRENTLY IT IS DISMANTLED, CLEANED AND PRIMED GEARBOX MAKE SEEGERS CONTROL CABINET AND DOCUMENTATION AVAILABLE YEAR OF CONSTRUCTION: 1976 FRONT ROLL WAS RENEWED IN ABT. 1986 DRIVE POWER: 90 KW.
Vendedor: K & K Industrievertretungen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more TROESTER types: