349 ofertas

Año de construcción: usado
Ubicación: Land-year of construction: 2006
hours of operation machine: 25.436 h (06.03.2019)
pressing force approx.: 850 kn
bending length approx.: 2210 mm
control: tasc 6000
working height approx.: 1050 mm
free stand round about: 1750 mm
usable height approx.: 615 mm
space requirements: 2840 x 3100 x 1740 mm
approximate weight machine: 7,800 kg
total connected load approx.: 17 kva

hours of operation a machine: 25.436 h (06.03.2019)
a hydraulic: 17.535 h (06.03.2019)
run-time compression beams: 2593 h (06.03.2019)

standard equipment
-stable machine frame in all-steel construction
-pressure bar with high flexural strength
-electro-hydraulic top drive proportional valves - modern block hydraulic - cnc back gauge with gear rack / bevel drive, for x - and r axes, risk free move the stop fingers from the front - top tool clamping hydraulically
substation stuff for ev matrices, hydraulic clamping, programmable shift (2 positions) - safety device, roll protection covers rear - enclosure air conditioning control
-tasc 6000
-network capability

advanced machine equipment
-increase height/stroke
-additional stop fingers 2-axis
-crowning cnc
-safety device bendguard
-acb preparation
-edition console
-tasc 6000 characters module topscad

technical data subject to change - subject to prior sale
the operating hours for delivery of the machine may differ from the hours recorded in the offer YEAR OF CONSTRUCTION: 2006 HOURS OF OPERATION MACHINE: 25.436 H (06.03.2019) PRESSING FORCE APPROX.: 850 KN BENDING LENGTH APPROX.: 2210 MM CONTROL: TASC 6000 WORKING HEIGHT APPROX.: 1050 MM FREE STAND ROUND ABOUT: 1750 MM USABLE HEIGHT APPROX.: 615 MM SPACE REQUIREMENTS: 2840 X 3100 X 1740 MM APPROXIMATE WEIGHT MACHINE: 7,800 KG TOTAL CONNECTED LOAD APPROX.: 17 KVA HOURS OF OPERATION A MACHINE: 25.436 H (06.03.2019) A HYDRAULIC: 17.535 H (06.03.2019) RUN-TIME COMPRESSION BEAMS: 2593 H (06.03.2019) STANDARD EQUIPMENT -STABLE MACHINE FRAME IN ALL-STEEL CONSTRUCTION -PRESSURE BAR WITH HIGH FLEXURAL STRENGTH -ELECTRO-HYDRAULIC TOP DRIVE PROPORTIONAL VALVES - MODERN BLOCK HYDRAULIC - CNC BACK GAUGE WITH GEAR RACK / BEVEL DRIVE, FOR X - AND R AXES, RISK FREE MOVE THE STOP FINGERS FROM THE FRONT - TOP TOOL CLAMPING HYDRAULICALLY SUBSTATION STUFF FOR EV MATRICES, HYDRAULIC CLAMPING, PROGRAMMABLE SHIFT (2 POSITIONS) - SAFETY DEVICE, ROLL PROTECTION COVERS REAR - ENCLOSURE AIR CONDITIONING CONTROL -TASC 6000 -NETWORK CAPABILITY ADVANCED MACHINE EQUIPMENT -INCREASE HEIGHT/STROKE -ADDITIONAL STOP FINGERS 2-AXIS -CROWNING CNC -SAFETY DEVICE BENDGUARD -ACB PREPARATION -EDITION CONSOLE -TASC 6000 CHARACTERS MODULE TOPSCAD TECHNICAL DATA SUBJECT TO CHANGE - SUBJECT TO PRIOR SALE THE OPERATING HOURS FOR DELIVERY OF THE MACHINE MAY DIFFER FROM THE HOURS RECORDED IN THE OFFER
Vendedor: mteg GmbH
Año de construcción: usado
Ubicación: Land-working hours machine: 52323 h working hours laser on: 50589 h working hours beam on: 13277 h laser power: 3200 kw working range laser: 6500 x 1500 mm length: 18000 mm width: 9000 mm height: 2800 mm machine weight: 17700 kg max. wall thickness: 6,4  mm max. tube length: 6500 mm min. tube length (automatic): 3000 mm max. tube diameter: 150 mm min. tube diameter: 15 mm max. length finished parts: 6500 mm WORKING HOURS MACHINE: 52323 H WORKING HOURS LASER ON: 50589 H WORKING HOURS BEAM ON: 13277 H LASER POWER: 3200 KW WORKING RANGE LASER: 6500 X 1500 MM LENGTH: 18000 MM WIDTH: 9000 MM HEIGHT: 2800 MM MACHINE WEIGHT: 17700 KG MAX. WALL THICKNESS: 6,4 MM MAX. TUBE LENGTH: 6500 MM MIN. TUBE LENGTH (AUTOMATIC): 3000 MM MAX. TUBE DIAMETER: 150 MM MIN. TUBE DIAMETER: 15 MM MAX. LENGTH FINISHED PARTS: 6500 MM
Vendedor: PTF Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-trumpf
machine name : cnc press brakes
manufacturer : trumpf
model : trumabend v85 s
location : mumbai
year of manufacturing : 1996
technical specification: 
control: delem
capacity:85 
tons
bending length: 2550mm
open height: 365mm
stroke length:215mm
throat depth: 410mm
no. of axis: 6


 TRUMPF MACHINE NAME : CNC PRESS BRAKES MANUFACTURER : TRUMPF MODEL : TRUMABEND V85 S LOCATION : MUMBAI YEAR OF MANUFACTURING : 1996 TECHNICAL SPECIFICATION: CONTROL: DELEM CAPACITY:85 TONS BENDING LENGTH: 2550MM OPEN HEIGHT: 365MM STROKE LENGTH:215MM THROAT DEPTH: 410MM NO. OF AXIS: 6
Vendedor: Syndicate Machines Pvt. Ltd.
Año de construcción: usado
Ubicación: Land-sheet width: 3050 mm<br/>plate thickness: 6,0 mm<br/>cutting angle adjustment: 0,5 - 2,8 °<br/>back stop - adjustable: 10 - 1000 mm<br/>oil volume: 150 ltr.<br/>total power requirement: 11,0 kw<br/>weight of the machine ca.: 7.000 kg.<br/><br/><br/><br/><br/><br/> SHEET WIDTH: 3050 MM
PLATE THICKNESS: 6,0 MM
CUTTING ANGLE ADJUSTMENT: 0,5 - 2,8 °
BACK STOP - ADJUSTABLE: 10 - 1000 MM
OIL VOLUME: 150 LTR.
TOTAL POWER REQUIREMENT: 11,0 KW
WEIGHT OF THE MACHINE CA.: 7.000 KG.





Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-cutting force 180kn
max speed: 100/60/116 m / min
max cutting thickness 6.4 mm ( steel)
working size 2500x1250 mm
control unit trumpf
machine working hours 14.000 h
can be inspected under power CUTTING FORCE 180KN MAX SPEED: 100/60/116 M / MIN MAX CUTTING THICKNESS 6.4 MM ( STEEL) WORKING SIZE 2500X1250 MM CONTROL UNIT TRUMPF MACHINE WORKING HOURS 14.000 H CAN BE INSPECTED UNDER POWER
Vendedor: Pyramid Mühendislik
Año de construcción: usado
Ubicación: Land-working hours machine: 52323 h working hours laser on: 36373 h working hours beam on: 10840 h laser power: 2700 kw working range laser: 6500 x 1500 mm max. steel: 8 mm max. stainless steel: 5 mm max. aluminium: 4 mm length: 18000 mm width: 9000 mm height: 2800 mm machine weight: 17700 kg max. wall thickness: 6,4  mm max. tube length: 6500 mm min. tube length (automatic): 3000 mm max. tube diameter: 150 mm min. tube diameter: 15 mm max. length finished parts: 6500 mm max. tube weight: 20 kg/m max. tube bundle weight: 4000 kg max. speed: 100/5/40/40 mm / min smallest programmable increment: +/- 0,1 mm WORKING HOURS MACHINE: 52323 H WORKING HOURS LASER ON: 36373 H WORKING HOURS BEAM ON: 10840 H LASER POWER: 2700 KW WORKING RANGE LASER: 6500 X 1500 MM MAX. STEEL: 8 MM MAX. STAINLESS STEEL: 5 MM MAX. ALUMINIUM: 4 MM LENGTH: 18000 MM WIDTH: 9000 MM HEIGHT: 2800 MM MACHINE WEIGHT: 17700 KG MAX. WALL THICKNESS: 6,4 MM MAX. TUBE LENGTH: 6500 MM MIN. TUBE LENGTH (AUTOMATIC): 3000 MM MAX. TUBE DIAMETER: 150 MM MIN. TUBE DIAMETER: 15 MM MAX. LENGTH FINISHED PARTS: 6500 MM MAX. TUBE WEIGHT: 20 KG/M MAX. TUBE BUNDLE WEIGHT: 4000 KG MAX. SPEED: 100/5/40/40 MM / MIN SMALLEST PROGRAMMABLE INCREMENT: +/- 0,1 MM
Vendedor: PTF Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Precio: 4.900 €
Ubicación: Land-stanzlstg.: 7.5 to.
table size: 2000 x 750 mm
projection: 1620 mm
workspace in x: 2130 mm
total power: 2,2 kw / 400 v
machine weight: 3300 kg

equipment / accessories:

copy setup
circle cutting attachment
various tools + small parts - see photo
the machine is suited to flanging, beading, punching, etc.

all technical data are created according to our best knowledge and existing documents; confirm reserved error.
each party has the opportunity to test the machine in advance under current in our factory.
 STANZLSTG.: 7.5 TO. TABLE SIZE: 2000 X 750 MM PROJECTION: 1620 MM WORKSPACE IN X: 2130 MM TOTAL POWER: 2,2 KW / 400 V MACHINE WEIGHT: 3300 KG EQUIPMENT / ACCESSORIES: COPY SETUP CIRCLE CUTTING ATTACHMENT VARIOUS TOOLS + SMALL PARTS - SEE PHOTO THE MACHINE IS SUITED TO FLANGING, BEADING, PUNCHING, ETC. ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; CONFIRM RESERVED ERROR. EACH PARTY HAS THE OPPORTUNITY TO TEST THE MACHINE IN ADVANCE UNDER CURRENT IN OUR FACTORY.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-tonnage approx.: 85 ton bending length approx.: 2050 mm stroke: 215 mm distance between the columns: 1.750 mm working hours machine: 50000 h control: delem  TONNAGE APPROX.: 85 TON BENDING LENGTH APPROX.: 2050 MM STROKE: 215 MM DISTANCE BETWEEN THE COLUMNS: 1.750 MM WORKING HOURS MACHINE: 50000 H CONTROL: DELEM
Vendedor: PTF Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-machine weight 15,000 kg, sheet metal format max. 2,500 x 4,000 mm, laser power 2 x 6,000 w, laser type truflow 6000, serial no. d0009a1179, cooling unit, make klh, yom 2011, ser. ts00110946, equipment: 2 laser cutting heads, pallet changer, ser.-no. 40269s548, 2,500 x 4,000 mm, chip conveyor, loading system, make trumpf, type loadmaster, ser.-no. n0014a0216, control, make trump, elapsed operating hours resonator laser 2 15757, laser 1 16401, beam on (laser 2) 4341, laser on (laser 2) 15635, beam on (laser 1) 7508, laser on (laser 1) 16186
de:
cnc-laserschneidanlage, fabr. trumpf, typ trulaser 7040, bj. 2011, ser.-nr. a0320a0086, maschinengewicht 15.000 kg, blechformat max. 2.500 x 4.000 mm, laserleistung 2 x 6.000 w, lasertyp truflow 6000, ser.-nr. d0009a1179, kühlaggregat, fabr. klh, bj. 2011, ser.-nr. ts00110946, ausstattung: 2 laserschneidköpfe, palettenwechsler, ser.-nr. 40269s548, 2.500 x 4.000 mm, späneförderer, beladesystem, fabr. trumpf, typ loadmaster, ser.-nr. n0014a0216, steuer fabr. trumpf, abgel. betriebsstd. resonator laser 2 15757, laser 1 16401, strahl ein (laser 2) 4341, laser ein (laser 2) 15635, strahl ein (laser 1) 7508, laser ein (laser 1) 16186
  MACHINE WEIGHT 15,000 KG, SHEET METAL FORMAT MAX. 2,500 X 4,000 MM, LASER POWER 2 X 6,000 W, LASER TYPE TRUFLOW 6000, SERIAL NO. D0009A1179, COOLING UNIT, MAKE KLH, YOM 2011, SER. TS00110946, EQUIPMENT: 2 LASER CUTTING HEADS, PALLET CHANGER, SER.-NO. 40269S548, 2,500 X 4,000 MM, CHIP CONVEYOR, LOADING SYSTEM, MAKE TRUMPF, TYPE LOADMASTER, SER.-NO. N0014A0216, CONTROL, MAKE TRUMP, ELAPSED OPERATING HOURS RESONATOR LASER 2 15757, LASER 1 16401, BEAM ON (LASER 2) 4341, LASER ON (LASER 2) 15635, BEAM ON (LASER 1) 7508, LASER ON (LASER 1) 16186 DE: CNC-LASERSCHNEIDANLAGE, FABR. TRUMPF, TYP TRULASER 7040, BJ. 2011, SER.-NR. A0320A0086, MASCHINENGEWICHT 15.000 KG, BLECHFORMAT MAX. 2.500 X 4.000 MM, LASERLEISTUNG 2 X 6.000 W, LASERTYP TRUFLOW 6000, SER.-NR. D0009A1179, KüHLAGGREGAT, FABR. KLH, BJ. 2011, SER.-NR. TS00110946, AUSSTATTUNG: 2 LASERSCHNEIDKöPFE, PALETTENWECHSLER, SER.-NR. 40269S548, 2.500 X 4.000 MM, SPäNEFöRDERER, BELADESYSTEM, FABR. TRUMPF, TYP LOADMASTER, SER.-NR. N0014A0216, STEUER FABR. TRUMPF, ABGEL. BETRIEBSSTD. RESONATOR LASER 2 15757, LASER 1 16401, STRAHL EIN (LASER 2) 4341, LASER EIN (LASER 2) 15635, STRAHL EIN (LASER 1) 7508, LASER EIN (LASER 1) 16186
Vendedor: Hilco
Año de construcción: usado
Precio: used machinery auction RESALE 21.500 €
Ubicación: Land-weight approx.: 12950 kg<br/>dimensions (l x w x h) approx.: 2210 x 3640 x 2885 mm<br/>description: - serial number.: 885446<br> - operating hours: 79700 h<br> - pressure force: 1300 kn<br> - bending length: 3060 mm<br> - installation height: 535 mm<br> - stroke: 365 mm<br> - distance between uprights: 2690 mm<br> - upright outreach: 410 mm<br> - table height: 1050 mm<br> - table width: 120 mm<br> - connected load: 23 kva<br> - oil contents: 250 l<br> - rapid traverse: 200 mm/s<br> - working speed: 1-10 mm/s<br> - withdrawal speed: 135 mm/s<br> - speed x-axis: 500 mm/s<br> - speed r-axis: 300 mm/s<br> - speed z-axis: 1000 mm/s<br> - positioning accuracy y-axis: 0.01 mm<br> - positioining accuracy x-axis: 0.04 mm<br> - positioning accuracy r-axis: 0,08 mm<br> - positioniergenauigkeit z-axis: 0,06 mm<br> - travel x-axis: 600 mm<br> - travel r-axis: 250 mm<br> - travel z-axis: 2310 mm<br> - inclination: +/- 10 mm<br> <br> accessories:<br> control delem da 65t cnc<br> 4 axes backgauge<br> bend guard<br> support console<br> wila tool clamping on top and at the bottom<br> lazer safe<br> safety doors<br> crowning motor-driven<br> die movement pneumatic<br> bending aid available<br> WEIGHT APPROX.: 12950 KG
DIMENSIONS (L X W X H) APPROX.: 2210 X 3640 X 2885 MM
DESCRIPTION: - SERIAL NUMBER.: 885446
- OPERATING HOURS: 79700 H
- PRESSURE FORCE: 1300 KN
- BENDING LENGTH: 3060 MM
- INSTALLATION HEIGHT: 535 MM
- STROKE: 365 MM
- DISTANCE BETWEEN UPRIGHTS: 2690 MM
- UPRIGHT OUTREACH: 410 MM
- TABLE HEIGHT: 1050 MM
- TABLE WIDTH: 120 MM
- CONNECTED LOAD: 23 KVA
- OIL CONTENTS: 250 L
- RAPID TRAVERSE: 200 MM/S
- WORKING SPEED: 1-10 MM/S
- WITHDRAWAL SPEED: 135 MM/S
- SPEED X-AXIS: 500 MM/S
- SPEED R-AXIS: 300 MM/S
- SPEED Z-AXIS: 1000 MM/S
- POSITIONING ACCURACY Y-AXIS: 0.01 MM
- POSITIOINING ACCURACY X-AXIS: 0.04 MM
- POSITIONING ACCURACY R-AXIS: 0,08 MM
- POSITIONIERGENAUIGKEIT Z-AXIS: 0,06 MM
- TRAVEL X-AXIS: 600 MM
- TRAVEL R-AXIS: 250 MM
- TRAVEL Z-AXIS: 2310 MM
- INCLINATION: +/- 10 MM

ACCESSORIES:
CONTROL DELEM DA 65T CNC
4 AXES BACKGAUGE
BEND GUARD
SUPPORT CONSOLE
WILA TOOL CLAMPING ON TOP AND AT THE BOTTOM
LAZER SAFE
SAFETY DOORS
CROWNING MOTOR-DRIVEN
DIE MOVEMENT PNEUMATIC
BENDING AID AVAILABLE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-sheet metal dimension max. 1,500 x 3,000 mm, laser power 7,000 w, laser type truflow 7000, laser ref. d0004 b0842, cutting head, refrigeration unit, riedel, type l29 / 51-tr4500, yom 2008, ser. 930918, pallet brush cleaning system, high-speed cutting head, trutops, chip conveyor, autom. loading / unloading system, make trumpf, type liftmaster, year 2007, ser. no. n0023a1128, material no. 0415510, control, make trump, elapsed operating hours beam 18296, laser 43600, total operating hours 44341, 1 item accessories
de:
cnc-laserschneidanlage, fabr. trumpf, typ trulaser 5030, bj. 2008, ser.-nr. a0230a2187, blechmaß max. 1.500 x 3.000 mm, laserleistung 7.000 w, lasertyp truflow 7000, lasernr. d0004 b0842, schneidkopf, kälteaggregat, fabr. riedel, typ l29/51-tr4500, bj. 2008, ser.-nr. 930918, paletten-bürstenreinigungsanlage, highspeed-schneidkopf, trutops, späneförderer, autom. be-/entladesystem, fabr. trumpf, typ liftmaster, bj. 2007, ser.-nr. n0023a1128, materialnr. 0415510, steuerung, fabr.pf, abgel. betriebsstd. strahl ein 18296, laser ein 43600, gesamtbetriebsstd. 44341, 1 posten zubehö
  SHEET METAL DIMENSION MAX. 1,500 X 3,000 MM, LASER POWER 7,000 W, LASER TYPE TRUFLOW 7000, LASER REF. D0004 B0842, CUTTING HEAD, REFRIGERATION UNIT, RIEDEL, TYPE L29 / 51-TR4500, YOM 2008, SER. 930918, PALLET BRUSH CLEANING SYSTEM, HIGH-SPEED CUTTING HEAD, TRUTOPS, CHIP CONVEYOR, AUTOM. LOADING / UNLOADING SYSTEM, MAKE TRUMPF, TYPE LIFTMASTER, YEAR 2007, SER. NO. N0023A1128, MATERIAL NO. 0415510, CONTROL, MAKE TRUMP, ELAPSED OPERATING HOURS BEAM 18296, LASER 43600, TOTAL OPERATING HOURS 44341, 1 ITEM ACCESSORIES DE: CNC-LASERSCHNEIDANLAGE, FABR. TRUMPF, TYP TRULASER 5030, BJ. 2008, SER.-NR. A0230A2187, BLECHMAß MAX. 1.500 X 3.000 MM, LASERLEISTUNG 7.000 W, LASERTYP TRUFLOW 7000, LASERNR. D0004 B0842, SCHNEIDKOPF, KäLTEAGGREGAT, FABR. RIEDEL, TYP L29/51-TR4500, BJ. 2008, SER.-NR. 930918, PALETTEN-BüRSTENREINIGUNGSANLAGE, HIGHSPEED-SCHNEIDKOPF, TRUTOPS, SPäNEFöRDERER, AUTOM. BE-/ENTLADESYSTEM, FABR. TRUMPF, TYP LIFTMASTER, BJ. 2007, SER.-NR. N0023A1128, MATERIALNR. 0415510, STEUERUNG, FABR.PF, ABGEL. BETRIEBSSTD. STRAHL EIN 18296, LASER EIN 43600, GESAMTBETRIEBSSTD. 44341, 1 POSTEN ZUBEHö
Vendedor: Hilco
Año de construcción: usado
Precio: 186.000 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-sheet metal format max. 1,500 x 3,000 mm, laser power 6,000 w, laser type truflow 6000, laser no. d0004 a6095, refrigeration unit, make riedel, type l31 / 37-tr3.04, year 2007, ser. no. 890122, rated power 40.2 kva, pallet brush cleaning system, high-speed cutting head, trutops, chip conveyor, autom. loading / unloading system, make trumpf, type liftmaster, year 2007, ser. no. n0023a0612, material no. 0415510, control, make trump, elapsed operating hours beam on 26525, laser on 49254, total operating hours. 50404, 1 item accessories
de:
cnc-laserschneidanlage, fabr. trumpf, typ trulaser 5030, bj. 2007, ser.-nr. a0230a2065, blechformat max. 1.500 x 3.000 mm, laserleistung 6.000 w, lasertyp truflow 6000, lasernr. d0004 a6095, kühlaggregat, fabr. riedel, typ l31/37-tr3.04, bj. 2007, ser.-nr. 890122, nennleistung 40,2 kva, paletten-bürstenreinigungsanlage, highspeed-schneidkopf, trutops, späneförderer, autom. be-/entladesystem, fabr. trumpf, typ liftmaster, bj. 2007, ser.-nr. n0023a0612, materr. 0415510, steuerung, fabr. trumpf, abgel. betriebsstd. strahl ein 26525, laser ein 49254, gesamtbetriebsstd. 50404, 1 posten zubehö
  SHEET METAL FORMAT MAX. 1,500 X 3,000 MM, LASER POWER 6,000 W, LASER TYPE TRUFLOW 6000, LASER NO. D0004 A6095, REFRIGERATION UNIT, MAKE RIEDEL, TYPE L31 / 37-TR3.04, YEAR 2007, SER. NO. 890122, RATED POWER 40.2 KVA, PALLET BRUSH CLEANING SYSTEM, HIGH-SPEED CUTTING HEAD, TRUTOPS, CHIP CONVEYOR, AUTOM. LOADING / UNLOADING SYSTEM, MAKE TRUMPF, TYPE LIFTMASTER, YEAR 2007, SER. NO. N0023A0612, MATERIAL NO. 0415510, CONTROL, MAKE TRUMP, ELAPSED OPERATING HOURS BEAM ON 26525, LASER ON 49254, TOTAL OPERATING HOURS. 50404, 1 ITEM ACCESSORIES DE: CNC-LASERSCHNEIDANLAGE, FABR. TRUMPF, TYP TRULASER 5030, BJ. 2007, SER.-NR. A0230A2065, BLECHFORMAT MAX. 1.500 X 3.000 MM, LASERLEISTUNG 6.000 W, LASERTYP TRUFLOW 6000, LASERNR. D0004 A6095, KüHLAGGREGAT, FABR. RIEDEL, TYP L31/37-TR3.04, BJ. 2007, SER.-NR. 890122, NENNLEISTUNG 40,2 KVA, PALETTEN-BüRSTENREINIGUNGSANLAGE, HIGHSPEED-SCHNEIDKOPF, TRUTOPS, SPäNEFöRDERER, AUTOM. BE-/ENTLADESYSTEM, FABR. TRUMPF, TYP LIFTMASTER, BJ. 2007, SER.-NR. N0023A0612, MATERR. 0415510, STEUERUNG, FABR. TRUMPF, ABGEL. BETRIEBSSTD. STRAHL EIN 26525, LASER EIN 49254, GESAMTBETRIEBSSTD. 50404, 1 POSTEN ZUBEHö
Vendedor: Hilco
Año de construcción: usado
Precio: used machinery auction RESALE 50.000 €
Ubicación: Land-weight approx.: 20000 kg<br/>dimensions (l x w x h) approx.: 15000 x 5000 x 2500 mm<br/>description: laser cutting machine, sheet size: 2000 x 4000 mm, table changer, stroke axe z=150 mm, laser power: 5000 w, cutting capacity: ·steel: 25 mm ·inox: 20 mm ·aluminium: 12 mm, cutting head: 5 und 7.5 machine dismantled and ready for loading WEIGHT APPROX.: 20000 KG
DIMENSIONS (L X W X H) APPROX.: 15000 X 5000 X 2500 MM
DESCRIPTION: LASER CUTTING MACHINE, SHEET SIZE: 2000 X 4000 MM, TABLE CHANGER, STROKE AXE Z=150 MM, LASER POWER: 5000 W, CUTTING CAPACITY: ·STEEL: 25 MM ·INOX: 20 MM ·ALUMINIUM: 12 MM, CUTTING HEAD: 5 UND 7.5 MACHINE DISMANTLED AND READY FOR LOADING
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-fabr.-no. f1011f, working width max. 1,000 mm, cap. 500 kn, stroke max. 215 mm, operating pressure max. 290 bar, follow-up time 54 ms, equipment: cnc backlash, 4-axis, laser safety device, control, make delim, type da69
de:
cnc-abkantpresse (5302), fabr. trumpf, typ trumabend v50, bj. 2002, ser.-nr. b0101a0006, fabr.-nr. f1011f, arbeitsbreite max. 1.000 mm, presskraft max. 500 kn, hub max. 215 mm, betriebsdruck max. 290 bar, nachlaufzeit 54 ms, ausstattung: cnc-hinteranlschlag, 4-achsig, laser-sicherheitseinrichtung, steuerung, fabr. delim, typ da69
 FABR.-NO. F1011F, WORKING WIDTH MAX. 1,000 MM, CAP. 500 KN, STROKE MAX. 215 MM, OPERATING PRESSURE MAX. 290 BAR, FOLLOW-UP TIME 54 MS, EQUIPMENT: CNC BACKLASH, 4-AXIS, LASER SAFETY DEVICE, CONTROL, MAKE DELIM, TYPE DA69 DE: CNC-ABKANTPRESSE (5302), FABR. TRUMPF, TYP TRUMABEND V50, BJ. 2002, SER.-NR. B0101A0006, FABR.-NR. F1011F, ARBEITSBREITE MAX. 1.000 MM, PRESSKRAFT MAX. 500 KN, HUB MAX. 215 MM, BETRIEBSDRUCK MAX. 290 BAR, NACHLAUFZEIT 54 MS, AUSSTATTUNG: CNC-HINTERANLSCHLAG, 4-ACHSIG, LASER-SICHERHEITSEINRICHTUNG, STEUERUNG, FABR. DELIM, TYP DA69
Vendedor: Hilco
Año de construcción: usado
Precio: 750 €
Ubicación: Land-mod. f 100 for pittsburgh seam<br/><br/><br/><br/> MOD. F 100 FOR PITTSBURGH SEAM



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-mfg.-no. f1031f, width max. 4,000 mm, cap. 2,300 kg, stroke 445 mm, pressure max. 300 bar, speed max. 95 m/s, machine weight 19,200 kg, cnc-controlled backgauge, 6-axis, autom. bending aid, laser safety devices, control trumpf type tasc 6000, operating hours 26787.
de:
cnc-abkantpresse, fabr. trumpf, typ trubend 5230, bj. 2008, ser.-nr. b0508a0153, fabr.-nr. f1031f, arbeitsbreite max. 4.000 mm, presskraft max. 2.300 kg, hub max. 445 mm, betriebsdruck max. 300 bar, nachlaufzeit max. 95 ms, maschinengewicht 19.200 kg, ausstattung: cnc-gesteuerter hinteranschlag, 6-achsig, autom. biegehilfe, laser-sicherheitseinrichtungen, steuerung, fabr. trumpf, typ tasc 6000, abgel. betriebsstd. maschine ein 26787, laufzeit hydraulik 12223, laufzeit pressbalken 1672, zyklenpressbalken 1453092, laufzeit bombierung 193, zyklenbombierung 411603
 MFG.-NO. F1031F, WIDTH MAX. 4,000 MM, CAP. 2,300 KG, STROKE 445 MM, PRESSURE MAX. 300 BAR, SPEED MAX. 95 M/S, MACHINE WEIGHT 19,200 KG, CNC-CONTROLLED BACKGAUGE, 6-AXIS, AUTOM. BENDING AID, LASER SAFETY DEVICES, CONTROL TRUMPF TYPE TASC 6000, OPERATING HOURS 26787. DE: CNC-ABKANTPRESSE, FABR. TRUMPF, TYP TRUBEND 5230, BJ. 2008, SER.-NR. B0508A0153, FABR.-NR. F1031F, ARBEITSBREITE MAX. 4.000 MM, PRESSKRAFT MAX. 2.300 KG, HUB MAX. 445 MM, BETRIEBSDRUCK MAX. 300 BAR, NACHLAUFZEIT MAX. 95 MS, MASCHINENGEWICHT 19.200 KG, AUSSTATTUNG: CNC-GESTEUERTER HINTERANSCHLAG, 6-ACHSIG, AUTOM. BIEGEHILFE, LASER-SICHERHEITSEINRICHTUNGEN, STEUERUNG, FABR. TRUMPF, TYP TASC 6000, ABGEL. BETRIEBSSTD. MASCHINE EIN 26787, LAUFZEIT HYDRAULIK 12223, LAUFZEIT PRESSBALKEN 1672, ZYKLENPRESSBALKEN 1453092, LAUFZEIT BOMBIERUNG 193, ZYKLENBOMBIERUNG 411603
Vendedor: Hilco
Año de construcción: usado
Ubicación: Land-pressure: 50 t<br/>chamfer lenght: 1250 mm<br/>stroke: 215 mm<br/>weight of the machine ca.: 4750 kg<br/><br/><br/><br/><br/> PRESSURE: 50 T
CHAMFER LENGHT: 1250 MM
STROKE: 215 MM
WEIGHT OF THE MACHINE CA.: 4750 KG




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-mfg..-no. f1022f, width max. 2,000 mm, cap. 850 kn, stroke max. 215 mm, operating pressure max. 300 bar, follow-up time 95 m/s, machine weight 7,300 kg, cnc-controlled backgauge, 4-axis, safety light barrier, control trumpf type tasc6000, operating hours 34212
de:
cnc-abkantpresse, fabr. trumpf, typ trubend 5085, bj. 2008, ser.-nr. b0502a0383, fabr.-nr. f1022f, arbeitsbreite max. 2.000 mm, presskraft 850 kn,hub max. 215 mm, betriebsdruck max. 300 bar, nachlaufzeit 95 ms, maschinengewicht 7.300 kg, ausstattung: cnc-gesteuerter hinteranschlag, 4-achsig, sicherheitslichtschranke, steuerung, fabr. trumpf, typ tasc6000, abgel. betriebsstd. maschine ein 34212, laufzeit hydraulik 16564, laufzeit pressbalken 3186, zyklenpressbalken 3072963, laufzeit bombierung 302, zyklenbombierung 540736
 MFG..-NO. F1022F, WIDTH MAX. 2,000 MM, CAP. 850 KN, STROKE MAX. 215 MM, OPERATING PRESSURE MAX. 300 BAR, FOLLOW-UP TIME 95 M/S, MACHINE WEIGHT 7,300 KG, CNC-CONTROLLED BACKGAUGE, 4-AXIS, SAFETY LIGHT BARRIER, CONTROL TRUMPF TYPE TASC6000, OPERATING HOURS 34212 DE: CNC-ABKANTPRESSE, FABR. TRUMPF, TYP TRUBEND 5085, BJ. 2008, SER.-NR. B0502A0383, FABR.-NR. F1022F, ARBEITSBREITE MAX. 2.000 MM, PRESSKRAFT 850 KN,HUB MAX. 215 MM, BETRIEBSDRUCK MAX. 300 BAR, NACHLAUFZEIT 95 MS, MASCHINENGEWICHT 7.300 KG, AUSSTATTUNG: CNC-GESTEUERTER HINTERANSCHLAG, 4-ACHSIG, SICHERHEITSLICHTSCHRANKE, STEUERUNG, FABR. TRUMPF, TYP TASC6000, ABGEL. BETRIEBSSTD. MASCHINE EIN 34212, LAUFZEIT HYDRAULIK 16564, LAUFZEIT PRESSBALKEN 3186, ZYKLENPRESSBALKEN 3072963, LAUFZEIT BOMBIERUNG 302, ZYKLENBOMBIERUNG 540736
Vendedor: Hilco
Año de construcción: usado
Precio: used machinery auction RESALE 7.200 €
Ubicación: Land-weight approx.: 17000 kg<br/>dimensions (l x w x h) approx.: 6000 x 9000 x 3500 mm<br/>description: <p>working size 3000 x 1500 x 100 mm</p> <p>max cutting thickness 12 mm</p> <p>deviation precision +o- 0.1 mm</p> <p>dispersion average width 0.03 mm</p> <p>power laser 1500 w</p> <p>with double loading table size 3000 x 1500 mm</p> WEIGHT APPROX.: 17000 KG
DIMENSIONS (L X W X H) APPROX.: 6000 X 9000 X 3500 MM
DESCRIPTION:

WORKING SIZE 3000 X 1500 X 100 MM

MAX CUTTING THICKNESS 12 MM

DEVIATION PRECISION +O- 0.1 MM

DISPERSION AVERAGE WIDTH 0.03 MM

POWER LASER 1500 W

WITH DOUBLE LOADING TABLE SIZE 3000 X 1500 MM

Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cap. max. 220 kn, sheet thickness max. 8 mm, working area max. 1,250 x 2,500 mm, control manufacture trumpf.

de:
cnc-stanz- und nibbelmaschine, fabr. trumpf, typ trumatic 5000 r, bj. 2006, ser.-nr. a0060a0657, anschlussleistung 29 kva, schneidkraft max. 220 kn, blechstärke max. 8 mm, arbeitsbereich max. 1.250 x 2.500 mm, steuerung, fabr. trumpf, abgel. betriebsstd. nicht ermittelba
  CAP. MAX. 220 KN, SHEET THICKNESS MAX. 8 MM, WORKING AREA MAX. 1,250 X 2,500 MM, CONTROL MANUFACTURE TRUMPF. DE: CNC-STANZ- UND NIBBELMASCHINE, FABR. TRUMPF, TYP TRUMATIC 5000 R, BJ. 2006, SER.-NR. A0060A0657, ANSCHLUSSLEISTUNG 29 KVA, SCHNEIDKRAFT MAX. 220 KN, BLECHSTäRKE MAX. 8 MM, ARBEITSBEREICH MAX. 1.250 X 2.500 MM, STEUERUNG, FABR. TRUMPF, ABGEL. BETRIEBSSTD. NICHT ERMITTELBA
Vendedor: Hilco
Año de construcción: usado
Ubicación: Land-sheet width: 3000 mm<br/>plate length: 1500 mm<br/>plate thickness: 8 mm<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> SHEET WIDTH: 3000 MM
PLATE LENGTH: 1500 MM
PLATE THICKNESS: 8 MM
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-cnc-laserstanz-und nibbelmaschine (5102), fabr. trumpf, trumatic 600 l type (type no. 9312), bj. 1999, ser.-no. 080309, schneidkraft max. 2,400 w, 220 kn, laserleistung anschlussleistung maschinengewicht lasertyp tlf2400 turbo, 70 kva, 22,000 kg, blechleistung max. arbeitsbereich 8 mm, max. 1,500 x 3,000 mm, ausstattungsmerkmale: beladeautomat, gewindeschneiden + umformen, fabr. trumpf trumalift sheet, type master, bj. 1998, ser.-no. sm1606v105, series restblechentsorgung, 141, fabr. trumpf, type trumagrip, bj. 1998, ser.-no. 981246, steuerung, fabr. trumpf, abgel. betriebsstd. 8637 laserstrahl ein, ein 61609 laser, gesamtbetriebsstd. maschine 42483
  CNC-LASERSTANZ-UND NIBBELMASCHINE (5102), FABR. TRUMPF, TRUMATIC 600 L TYPE (TYPE NO. 9312), BJ. 1999, SER.-NO. 080309, SCHNEIDKRAFT MAX. 2,400 W, 220 KN, LASERLEISTUNG ANSCHLUSSLEISTUNG MASCHINENGEWICHT LASERTYP TLF2400 TURBO, 70 KVA, 22,000 KG, BLECHLEISTUNG MAX. ARBEITSBEREICH 8 MM, MAX. 1,500 X 3,000 MM, AUSSTATTUNGSMERKMALE: BELADEAUTOMAT, GEWINDESCHNEIDEN + UMFORMEN, FABR. TRUMPF TRUMALIFT SHEET, TYPE MASTER, BJ. 1998, SER.-NO. SM1606V105, SERIES RESTBLECHENTSORGUNG, 141, FABR. TRUMPF, TYPE TRUMAGRIP, BJ. 1998, SER.-NO. 981246, STEUERUNG, FABR. TRUMPF, ABGEL. BETRIEBSSTD. 8637 LASERSTRAHL EIN, EIN 61609 LASER, GESAMTBETRIEBSSTD. MASCHINE 42483
Vendedor: Hilco
Año de construcción: usado
Ubicación: Land-tonnage approx.: 360 kn bending length approx.: 1020 mm distance between side frames: 932 mm effective open height: 295 mm throat: 150 mm working speed: 25 mm / sec feeding speed: 220 mm / sec control: tasc 6000  term hydraulic: 45000 h length: 1805 mm width: 1330 mm height: 2380 mm weight of machine approx.: 2600 mm TONNAGE APPROX.: 360 KN BENDING LENGTH APPROX.: 1020 MM DISTANCE BETWEEN SIDE FRAMES: 932 MM EFFECTIVE OPEN HEIGHT: 295 MM THROAT: 150 MM WORKING SPEED: 25 MM / SEC FEEDING SPEED: 220 MM / SEC CONTROL: TASC 6000 TERM HYDRAULIC: 45000 H LENGTH: 1805 MM WIDTH: 1330 MM HEIGHT: 2380 MM WEIGHT OF MACHINE APPROX.: 2600 MM
Vendedor: PTF Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-cnc-abkantpresse (5301), fabr. trumpf trumabend v130, type, bj. 1998, masch.-nr. 885413, fabr.-nr. f1014f, maschinengewicht, nennpresskraft 1,300 12,950 kg kn, hub max. 365 mm, betriebsdruck max. 340 bar, nachlaufzeit 57 ms, 91 mm sicherheitsabstand, anschlussleistung, arbeitsbreite 23.0 kva max. 3,000 mm, ausstattungsmerkmale: 6-achs-maschine, cnc-steuerung, biegehilfe, winkelsensorik, fabr. de borja, type da69, abgel. betriebsstd. 29,712
   CNC-ABKANTPRESSE (5301), FABR. TRUMPF TRUMABEND V130, TYPE, BJ. 1998, MASCH.-NR. 885413, FABR.-NR. F1014F, MASCHINENGEWICHT, NENNPRESSKRAFT 1,300 12,950 KG KN, HUB MAX. 365 MM, BETRIEBSDRUCK MAX. 340 BAR, NACHLAUFZEIT 57 MS, 91 MM SICHERHEITSABSTAND, ANSCHLUSSLEISTUNG, ARBEITSBREITE 23.0 KVA MAX. 3,000 MM, AUSSTATTUNGSMERKMALE: 6-ACHS-MASCHINE, CNC-STEUERUNG, BIEGEHILFE, WINKELSENSORIK, FABR. DE BORJA, TYPE DA69, ABGEL. BETRIEBSSTD. 29,712
Vendedor: Hilco
Año de construcción: usado
Precio: used machinery auction RESALE 120 €
Ubicación: Land-weight approx.: 10 kg<br/>dimensions (l x w x h) approx.: 500 x 500 x 300 mm<br/>description: see plate on photos WEIGHT APPROX.: 10 KG
DIMENSIONS (L X W X H) APPROX.: 500 X 500 X 300 MM
DESCRIPTION: SEE PLATE ON PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-year of constr.: 2015
hours of operation machine: 8.429 h (06.03.2019)
pressing force approx.: 360 kn
bending length approx.: 1020 mm
control: tasc 6000
working height approx.: 1150 mm
free stand round about: 932 mm
usable height approx.: 300 mm
space requirements: 1805 x 1330 x 2380 mm
approximate weight machine: 2,600 kg
total connected load approx.: 6 kva

standard equipment

bejyws0sqk
a time program: 6.510 h
press bar runtime: 1: 058 h
cycles press bar: 2.185.654 pcs.

machine
-stable machine frame for standing and seated operation
-deformation enhanced press bar
-highly dynamic, electro. direct drive (torque motor)
-inductive length measuring system with temperature compensation
-enclosure air conditioning
-ergonomic machine design

control
-trump integrated tasc 6000
-numeric workshop programming
-windows xpe, pentium m 1.1 ghz clock frequency
-1 gb ram memory
-15-inch touch screen
-network capable

security
-side hinged doors
-rear protection cover
-2-button foot switch, for standing and seated operation
-ce marking

advanced facilities
-trailing stop system 6 axes

ergonomics package
-comfort plate (front)
-comfort footrest
-2 shelf brackets
-2 document shelves
-lighting of workroom front (led)
-control unit swivel
-sitting and standing support

productivity plus package
-bendguard (with block-laser)
-graphic workshop programming
-automatic tool clamping

technical data subject to change - subject to prior sale
the operating hours for delivery of the machine may differ from the hours recorded in the offer YEAR OF CONSTR.: 2015 HOURS OF OPERATION MACHINE: 8.429 H (06.03.2019) PRESSING FORCE APPROX.: 360 KN BENDING LENGTH APPROX.: 1020 MM CONTROL: TASC 6000 WORKING HEIGHT APPROX.: 1150 MM FREE STAND ROUND ABOUT: 932 MM USABLE HEIGHT APPROX.: 300 MM SPACE REQUIREMENTS: 1805 X 1330 X 2380 MM APPROXIMATE WEIGHT MACHINE: 2,600 KG TOTAL CONNECTED LOAD APPROX.: 6 KVA STANDARD EQUIPMENT BEJYWS0SQK A TIME PROGRAM: 6.510 H PRESS BAR RUNTIME: 1: 058 H CYCLES PRESS BAR: 2.185.654 PCS. MACHINE -STABLE MACHINE FRAME FOR STANDING AND SEATED OPERATION -DEFORMATION ENHANCED PRESS BAR -HIGHLY DYNAMIC, ELECTRO. DIRECT DRIVE (TORQUE MOTOR) -INDUCTIVE LENGTH MEASURING SYSTEM WITH TEMPERATURE COMPENSATION -ENCLOSURE AIR CONDITIONING -ERGONOMIC MACHINE DESIGN CONTROL -TRUMP INTEGRATED TASC 6000 -NUMERIC WORKSHOP PROGRAMMING -WINDOWS XPE, PENTIUM M 1.1 GHZ CLOCK FREQUENCY -1 GB RAM MEMORY -15-INCH TOUCH SCREEN -NETWORK CAPABLE SECURITY -SIDE HINGED DOORS -REAR PROTECTION COVER -2-BUTTON FOOT SWITCH, FOR STANDING AND SEATED OPERATION -CE MARKING ADVANCED FACILITIES -TRAILING STOP SYSTEM 6 AXES ERGONOMICS PACKAGE -COMFORT PLATE (FRONT) -COMFORT FOOTREST -2 SHELF BRACKETS -2 DOCUMENT SHELVES -LIGHTING OF WORKROOM FRONT (LED) -CONTROL UNIT SWIVEL -SITTING AND STANDING SUPPORT PRODUCTIVITY PLUS PACKAGE -BENDGUARD (WITH BLOCK-LASER) -GRAPHIC WORKSHOP PROGRAMMING -AUTOMATIC TOOL CLAMPING TECHNICAL DATA SUBJECT TO CHANGE - SUBJECT TO PRIOR SALE THE OPERATING HOURS FOR DELIVERY OF THE MACHINE MAY DIFFER FROM THE HOURS RECORDED IN THE OFFER
Vendedor: mteg GmbH
Año de construcción: usado
Ubicación: Land-sheet width: 1200 mm<br/>plate length: 200 mm<br/>punching force: 250 kn<br/>control: bosch trumagraph <br/><br/><br/><br/><br/> SHEET WIDTH: 1200 MM
PLATE LENGTH: 200 MM
PUNCHING FORCE: 250 KN
CONTROL: BOSCH TRUMAGRAPH




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-make: trump card
type: trulaser 5030
year of construction: 2010
hours of operation: 19.200 / 42.100 (as of 03/2019)
resonator truflow 6000, laser power: 6000 watts
control: siemens sinumerik 840 d
working range: 3000 mm x 1500 mm x 115 mm

â?¢ closed machine frame with integrated laser unit
â?¢ bewegunseinheit for high-precision machining
â?¢ automatic pallet changer
â?¢ a cutting head strategy
â?¢ longitudinal conveyor for small parts/waste
â?¢ maintenance-free turbo centrifugal blower
â?¢ drives: gantry drive in combination with direct linear drives
â?¢ laser cutting head with a 250 mm lens
â?¢ mini
â?¢ universal cutting head quick change facility uti with fieldbus connection
â?¢ programmable cutting gas selection/pressure adjustment
â?¢ laser power control
â?¢ position laser diode
â?¢ solar
â?¢ fastline
â?¢ controlline capacitive height control and process control
â?¢ contourline for making small holes
â?¢ fast processing with sprintline in all thicknesses
â?¢ automatic focus position adjustment focusline
â?¢ nitroline high pressure cutting
â?¢ plasmaline
â?¢ automatic blechauã?enkantenerfsassung
â?¢ pierceline
â?¢ programmable power cycles
â?¢ microweld
â?¢ automatic nozzle cleaning
â?¢ spraying device for secure thick sheet metal processing
â?¢ automatic switch-off
â?¢ lighting of workroom
â?¢ control sinumerik 840 d: open control on pc-based, easy to use, online help, integrated e-shop, diagnostics, maintenance logbook, technology data, tele-service.
â?¢ shop floor programming
â?¢ security: light barriers more beam, beam guiding completely encapsulated and monitoring system, multi chamber extraction and compact dust collector, cab ventilated with nitrogen,.
â?¢ tft color screen
â?¢ rj45 network connection
â?¢ usb

additional equipment:
â?¢ loadmaster incl. loading station with cow magnets
â?¢ magnet setup to load master
â?¢ conveyor right with container

the machine is in very good condition and can be seen under power.
it is available from july 2019 ex works germany postal area 94xxx.
error in the data and intermediate sale reserve. MAKE: TRUMP CARD TYPE: TRULASER 5030 YEAR OF CONSTRUCTION: 2010 HOURS OF OPERATION: 19.200 / 42.100 (AS OF 03/2019) RESONATOR TRUFLOW 6000, LASER POWER: 6000 WATTS CONTROL: SIEMENS SINUMERIK 840 D WORKING RANGE: 3000 MM X 1500 MM X 115 MM &ACIRC;?&CENT; CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT &ACIRC;?&CENT; BEWEGUNSEINHEIT FOR HIGH-PRECISION MACHINING &ACIRC;?&CENT; AUTOMATIC PALLET CHANGER &ACIRC;?&CENT; A CUTTING HEAD STRATEGY &ACIRC;?&CENT; LONGITUDINAL CONVEYOR FOR SMALL PARTS/WASTE &ACIRC;?&CENT; MAINTENANCE-FREE TURBO CENTRIFUGAL BLOWER &ACIRC;?&CENT; DRIVES: GANTRY DRIVE IN COMBINATION WITH DIRECT LINEAR DRIVES &ACIRC;?&CENT; LASER CUTTING HEAD WITH A 250 MM LENS &ACIRC;?&CENT; MINI &ACIRC;?&CENT; UNIVERSAL CUTTING HEAD QUICK CHANGE FACILITY UTI WITH FIELDBUS CONNECTION &ACIRC;?&CENT; PROGRAMMABLE CUTTING GAS SELECTION/PRESSURE ADJUSTMENT &ACIRC;?&CENT; LASER POWER CONTROL &ACIRC;?&CENT; POSITION LASER DIODE &ACIRC;?&CENT; SOLAR &ACIRC;?&CENT; FASTLINE &ACIRC;?&CENT; CONTROLLINE CAPACITIVE HEIGHT CONTROL AND PROCESS CONTROL &ACIRC;?&CENT; CONTOURLINE FOR MAKING SMALL HOLES &ACIRC;?&CENT; FAST PROCESSING WITH SPRINTLINE IN ALL THICKNESSES &ACIRC;?&CENT; AUTOMATIC FOCUS POSITION ADJUSTMENT FOCUSLINE &ACIRC;?&CENT; NITROLINE HIGH PRESSURE CUTTING &ACIRC;?&CENT; PLASMALINE &ACIRC;?&CENT; AUTOMATIC BLECHAU&ATILDE;?ENKANTENERFSASSUNG &ACIRC;?&CENT; PIERCELINE &ACIRC;?&CENT; PROGRAMMABLE POWER CYCLES &ACIRC;?&CENT; MICROWELD &ACIRC;?&CENT; AUTOMATIC NOZZLE CLEANING &ACIRC;?&CENT; SPRAYING DEVICE FOR SECURE THICK SHEET METAL PROCESSING &ACIRC;?&CENT; AUTOMATIC SWITCH-OFF &ACIRC;?&CENT; LIGHTING OF WORKROOM &ACIRC;?&CENT; CONTROL SINUMERIK 840 D: OPEN CONTROL ON PC-BASED, EASY TO USE, ONLINE HELP, INTEGRATED E-SHOP, DIAGNOSTICS, MAINTENANCE LOGBOOK, TECHNOLOGY DATA, TELE-SERVICE. &ACIRC;?&CENT; SHOP FLOOR PROGRAMMING &ACIRC;?&CENT; SECURITY: LIGHT BARRIERS MORE BEAM, BEAM GUIDING COMPLETELY ENCAPSULATED AND MONITORING SYSTEM, MULTI CHAMBER EXTRACTION AND COMPACT DUST COLLECTOR, CAB VENTILATED WITH NITROGEN,. &ACIRC;?&CENT; TFT COLOR SCREEN &ACIRC;?&CENT; RJ45 NETWORK CONNECTION &ACIRC;?&CENT; USB ADDITIONAL EQUIPMENT: &ACIRC;?&CENT; LOADMASTER INCL. LOADING STATION WITH COW MAGNETS &ACIRC;?&CENT; MAGNET SETUP TO LOAD MASTER &ACIRC;?&CENT; CONVEYOR RIGHT WITH CONTAINER THE MACHINE IS IN VERY GOOD CONDITION AND CAN BE SEEN UNDER POWER. IT IS AVAILABLE FROM JULY 2019 EX WORKS GERMANY POSTAL AREA 94XXX. ERROR IN THE DATA AND INTERMEDIATE SALE RESERVE.
Vendedor: MAFdirekt Maschinen- & Anlagenfachhandel Marcus Epple
Año de construcción: usado
Ubicación: Land-sheet width:2000 mm<br/>plate length:1300 mm<br/>plate thickness:7 mm<br/>table-size:1300 x 2000 mm<br/>pressure:7,5 t<br/>punch diameter:max. 50 mm<br/>length of stroke min./max.:6,5 - 12,5 mm<br/>no. of strokes:330 - 1600  hub/min<br/>weight:3,2 t<br/>dimensions (l/w/h):3600x2700x2100 mm<br/><br/>accessories:  including additional tables left and right  some accessories manuals SHEET WIDTH:2000 MM
PLATE LENGTH:1300 MM
PLATE THICKNESS:7 MM
TABLE-SIZE:1300 X 2000 MM
PRESSURE:7,5 T
PUNCH DIAMETER:MAX. 50 MM
LENGTH OF STROKE MIN./MAX.:6,5 - 12,5 MM
NO. OF STROKES:330 - 1600 HUB/MIN
WEIGHT:3,2 T
DIMENSIONS (L/W/H):3600X2700X2100 MM

ACCESSORIES: INCLUDING ADDITIONAL TABLES LEFT AND RIGHT SOME ACCESSORIES MANUALS
Vendedor: S+B Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-laser operating hours laser on: 65317 h	
laser operating hours beam on: 62419 h	
laser power: 3 kw	
laser type: co2 truflow 3200	
control system: siemens sinumerik 840 d	
2 pallets	
table dimensions: 3500 x 2800 mm	
max. workpiece weight: 710 kg	
max. sheet thickness:	
steel: 20 mm	
stainless steel: 12 mm	
aluminum: 8 mm	
machine dimensions:	
9300 x 4600 x 2000 mm	
machine weight: 9400 kg	
availability: september 2019 LASER OPERATING HOURS LASER ON: 65317 H LASER OPERATING HOURS BEAM ON: 62419 H LASER POWER: 3 KW LASER TYPE: CO2 TRUFLOW 3200 CONTROL SYSTEM: SIEMENS SINUMERIK 840 D 2 PALLETS TABLE DIMENSIONS: 3500 X 2800 MM MAX. WORKPIECE WEIGHT: 710 KG MAX. SHEET THICKNESS: STEEL: 20 MM STAINLESS STEEL: 12 MM ALUMINUM: 8 MM MACHINE DIMENSIONS: 9300 X 4600 X 2000 MM MACHINE WEIGHT: 9400 KG AVAILABILITY: SEPTEMBER 2019
Vendedor: AMARON s.r.o.
Año de construcción: usado
Precio: used machinery auction RESALE 14.500 €
Ubicación: Land-weight approx.: 12000 kg<br/>dimensions (l x w x h) approx.: 5600 x 5100 x 2300 mm<br/>description: max. punching force 220 kn, table approx. 5100 x 1200 mm, 20-fold tool changer, control bosch cc 220, with extensive punching accessories, see photos WEIGHT APPROX.: 12000 KG
DIMENSIONS (L X W X H) APPROX.: 5600 X 5100 X 2300 MM
DESCRIPTION: MAX. PUNCHING FORCE 220 KN, TABLE APPROX. 5100 X 1200 MM, 20-FOLD TOOL CHANGER, CONTROL BOSCH CC 220, WITH EXTENSIVE PUNCHING ACCESSORIES, SEE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cnc - control                                          delem da 65
pressure capacity                                               85 t 
bending length                                               2.550 mm
throat depth                                                   410 mm
working height                                               1.050 mm 
cnc - controlled crowning, controlled backgauge
pneumatic die shift
 
accessories: pad arms, shared tool
  CNC - CONTROL DELEM DA 65 PRESSURE CAPACITY 85 T BENDING LENGTH 2.550 MM THROAT DEPTH 410 MM WORKING HEIGHT 1.050 MM CNC - CONTROLLED CROWNING, CONTROLLED BACKGAUGE PNEUMATIC DIE SHIFT ACCESSORIES: PAD ARMS, SHARED TOOL
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lmz-1069</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>loadmaster</td> </tr> <tr> <td>year:</td> <td>2008</td> </tr> <tr> <td>length:</td> <td>4300 mm</td> </tr> <tr> <td>width:</td> <td>2300 mm</td> </tr> <tr> <td>height:</td> <td>2300 mm</td> </tr> <tr> <td>weight:</td> <td>2800 kg</td> </tr> </tbody> </table> <br> <strong>loading device</strong> </h3>\n<strong> </strong> </h3> \nloadmaster for trulaser 3030</h3>\n</h3> \nmax sheet format: 3000 mm x 1500 mm</h3>\nmin. sheet format: 1000 mm x 1000 mm</h3>\nmax. sheet thickness: 25 mm</h3>\n</h3> \nincluding loading station with fanning magnets.</h3>\n</h3>

TECHNICAL DATA

ITEM NUMBER: LMZ-1069
MANUFACTURER: TRUMPF
TYPE: LOADMASTER
YEAR: 2008
LENGTH: 4300 MM
WIDTH: 2300 MM
HEIGHT: 2300 MM
WEIGHT: 2800 KG

LOADING DEVICE \N \NLOADMASTER FOR TRULASER 3030\N \NMAX SHEET FORMAT: 3000 MM X 1500 MM\NMIN. SHEET FORMAT: 1000 MM X 1000 MM\NMAX. SHEET THICKNESS: 25 MM\N \NINCLUDING LOADING STATION WITH FANNING MAGNETS.\N
Vendedor: I-H&S GmbH
Año de construcción: usado
Precio: 56.900 €
Ubicación: Land-cnc - control                                              delem da 69 
force                                                              130 t 
working width                                                    3,000 mm 
stroke max.                                                        215 mm operating pressure max.                                            340 bar 
delay                                                               62 ms 
connection capacity                                                 16 kva
machine weight                                                 11.25 t 

accessories: tool accessories in accordance with photos

 CNC - CONTROL DELEM DA 69 FORCE 130 T WORKING WIDTH 3,000 MM STROKE MAX. 215 MM OPERATING PRESSURE MAX. 340 BAR DELAY 62 MS CONNECTION CAPACITY 16 KVA MACHINE WEIGHT 11.25 T ACCESSORIES: TOOL ACCESSORIES IN ACCORDANCE WITH PHOTOS
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lmz-1068</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>liftmaster store linear</td> </tr> <tr> <td>year:</td> <td>2008</td> </tr> <tr> <td>length:</td> <td> </td> </tr> <tr> <td>width:</td> <td> </td> </tr> <tr> <td>height:</td> <td> </td> </tr> <tr> <td>weight:</td> <td> </td> </tr> </tbody> </table> <br> \n<strong> </strong> </h3> \n<strong>basic configuration liftmaster store linear </strong> </h3> <strong> </strong> </h3>\n<strong> </strong> </h3> \n</h3>· </h3>basic system for loading and unloading, gantry with two gantry stations, vacuum frame, horizontal axis, zipper prongs, guide frame and pallet pull-out incl. a standard loading height check (90mm), direct connection to storage system trustore or ul, safety equipment and start pedestal.</h3>\n</h3> \n</h3> <strong>additional options liftmaser store linear</strong> </h3>\n<strong> </strong> </h3> \n</h3>· </h3>extended sort (basis for parts separation as from 1000 x 600 mm)</h3>\n</h3>· </h3>extended parts removal from 600 x 600 mm: additional small suction cups allow removal of parts bigger than 600 x 600 mm.</h3>\n</h3>· </h3>integrated sheet alignment (premise: extended sort)</h3>\n</h3>· </h3>separation of thin sheets (s=1-2 mm)</h3>\n</h3>· </h3>additional gantry station incl. safety equipment</h3>\n</h3> \n</h3> <strong>basic configuration sortmaster</strong> </h3>\n<strong> </strong> </h3> \n</h3>· </h3>unloading and sorting unit for single parts max. 35 kg in weight and measuring 600 x 600 mm </h3>\n</h3>· </h3>programmable vacuum gripper with removal sensor</h3>\n</h3>· </h3>cleaning station for grippers and slats</h3>\n</h3>· </h3>additional unloading platform with container for small parts</h3>\n</h3> \n<strong>additional options sortmaster</strong> </h3>\n<strong> </strong> </h3> \n</h3>· </h3>rotation unit and extended removal: for parts up to 1000 x 600 mm </h3>\n</h3>· </h3>loading cart, motorized</h3>\n</h3> \n</h3> <strong>fmc / storage systems</strong> </h3>\n<strong> </strong> </h3> \n</h3>· </h3>safety devices for connection to storage system incl. 2nd light barrier circuit</h3>\n</h3>· </h3>storage interface</h3>\n</h3>· </h3>cell server software </h3>\n</h3>· </h3>machine connection to cell-server: software connection of an additional machine to the store management software (cell-server).</h3>\n</h3> \n</h3> <strong>basic configuration rack system trustore 3030 </strong> </h3>\n<strong> </strong> </h3> \nwith 36 storage trays and 5 stations</h3>\n</h3> \n</h3>· </h3>sheet format 3000 x 1500 mm</h3>\n</h3>· </h3>shelf tower, loading height 90mm load capacity per pallet 3t</h3>\n</h3>· </h3>input/output station with manually operated cart and unpac-ing station</h3>\n</h3>· </h3>start post</h3>\n</h3>· </h3>store safety devices</h3>\n</h3> \n</h3> <strong>additional options trustore 3030</strong> </h3>\n<strong> </strong> </h3> \n</h3>· </h3>column paneling </h3>\n</h3>· </h3>stackable floor plate for raw material</h3>\n</h3>· </h3>rack server</h3>\n</h3>· </h3>control panel</h3>\n</h3>· </h3>store safety equipment</h3>\n</h3>· </h3>storage connection interface</h3>\n</h3>· </h3>teleservice via internet</h3>\n</h3>· </h3>lifting speed 12 m/min</h3>\n</h3>· </h3>pallet racking speed 30 m/min</h3>\n</h3>· </h3>acceleration 0.5 m/s²</h3>\n</h3> \n</h3>

TECHNICAL DATA

ITEM NUMBER: LMZ-1068
MANUFACTURER: TRUMPF
TYPE: LIFTMASTER STORE LINEAR
YEAR: 2008
LENGTH:
WIDTH:
HEIGHT:
WEIGHT:

\N \NBASIC CONFIGURATION LIFTMASTER STORE LINEAR \N \N· BASIC SYSTEM FOR LOADING AND UNLOADING, GANTRY WITH TWO GANTRY STATIONS, VACUUM FRAME, HORIZONTAL AXIS, ZIPPER PRONGS, GUIDE FRAME AND PALLET PULL-OUT INCL. A STANDARD LOADING HEIGHT CHECK (90MM), DIRECT CONNECTION TO STORAGE SYSTEM TRUSTORE OR UL, SAFETY EQUIPMENT AND START PEDESTAL.\N \N ADDITIONAL OPTIONS LIFTMASER STORE LINEAR \N \N· EXTENDED SORT (BASIS FOR PARTS SEPARATION AS FROM 1000 X 600 MM)\N· EXTENDED PARTS REMOVAL FROM 600 X 600 MM: ADDITIONAL SMALL SUCTION CUPS ALLOW REMOVAL OF PARTS BIGGER THAN 600 X 600 MM.\N· INTEGRATED SHEET ALIGNMENT (PREMISE: EXTENDED SORT)\N· SEPARATION OF THIN SHEETS (S=1-2 MM)\N· ADDITIONAL GANTRY STATION INCL. SAFETY EQUIPMENT\N \N BASIC CONFIGURATION SORTMASTER \N \N· UNLOADING AND SORTING UNIT FOR SINGLE PARTS MAX. 35 KG IN WEIGHT AND MEASURING 600 X 600 MM \N· PROGRAMMABLE VACUUM GRIPPER WITH REMOVAL SENSOR\N· CLEANING STATION FOR GRIPPERS AND SLATS\N· ADDITIONAL UNLOADING PLATFORM WITH CONTAINER FOR SMALL PARTS\N \NADDITIONAL OPTIONS SORTMASTER \N \N· ROTATION UNIT AND EXTENDED REMOVAL: FOR PARTS UP TO 1000 X 600 MM \N· LOADING CART, MOTORIZED\N \N FMC / STORAGE SYSTEMS \N \N· SAFETY DEVICES FOR CONNECTION TO STORAGE SYSTEM INCL. 2ND LIGHT BARRIER CIRCUIT\N· STORAGE INTERFACE\N· CELL SERVER SOFTWARE \N· MACHINE CONNECTION TO CELL-SERVER: SOFTWARE CONNECTION OF AN ADDITIONAL MACHINE TO THE STORE MANAGEMENT SOFTWARE (CELL-SERVER).\N \N BASIC CONFIGURATION RACK SYSTEM TRUSTORE 3030 \N \NWITH 36 STORAGE TRAYS AND 5 STATIONS\N \N· SHEET FORMAT 3000 X 1500 MM\N· SHELF TOWER, LOADING HEIGHT 90MM LOAD CAPACITY PER PALLET 3T\N· INPUT/OUTPUT STATION WITH MANUALLY OPERATED CART AND UNPAC-ING STATION\N· START POST\N· STORE SAFETY DEVICES\N \N ADDITIONAL OPTIONS TRUSTORE 3030 \N \N· COLUMN PANELING \N· STACKABLE FLOOR PLATE FOR RAW MATERIAL\N· RACK SERVER\N· CONTROL PANEL\N· STORE SAFETY EQUIPMENT\N· STORAGE CONNECTION INTERFACE\N· TELESERVICE VIA INTERNET\N· LIFTING SPEED 12 M/MIN\N· PALLET RACKING SPEED 30 M/MIN\N· ACCELERATION 0.5 M/S²\N \N
Vendedor: I-H&S GmbH
Año de construcción: usado
Ubicación: Land-type of machine: punching nibbling machine, copy and coordinate nibbling machine,.
manufacturer: trumpf.,.
model: cn902.
year of production: 1985.
condition: very good, excellent (almost as good as new!).
type of offer: used machine,
     ,.	
technical data:.
power: 7.5 t,
projection: 1620 mm,
drive type: el / mech.,.
table: 2000 x 750 mm.
drive: 2,2 kw.
comment:.
copying unit.
circle sawing device.
travel in x = 2130 mm,
machine also for the crimping, swaging, punching, etc.
several tools.
weight: 3300 kg,
     ,.	
the machine is in very good, excellent (almost new) shape and ready for operation. it can be visited and demonstrated at our location.,.
     ,.
we will be pleased if you take an interest in our offer.,.
  TYPE OF MACHINE: PUNCHING NIBBLING MACHINE, COPY AND COORDINATE NIBBLING MACHINE,. MANUFACTURER: TRUMPF.,. MODEL: CN902. YEAR OF PRODUCTION: 1985. CONDITION: VERY GOOD, EXCELLENT (ALMOST AS GOOD AS NEW!). TYPE OF OFFER: USED MACHINE, ,. TECHNICAL DATA:. POWER: 7.5 T, PROJECTION: 1620 MM, DRIVE TYPE: EL / MECH.,. TABLE: 2000 X 750 MM. DRIVE: 2,2 KW. COMMENT:. COPYING UNIT. CIRCLE SAWING DEVICE. TRAVEL IN X = 2130 MM, MACHINE ALSO FOR THE CRIMPING, SWAGING, PUNCHING, ETC. SEVERAL TOOLS. WEIGHT: 3300 KG, ,. THE MACHINE IS IN VERY GOOD, EXCELLENT (ALMOST NEW) SHAPE AND READY FOR OPERATION. IT CAN BE VISITED AND DEMONSTRATED AT OUR LOCATION.,. ,. WE WILL BE PLEASED IF YOU TAKE AN INTEREST IN OUR OFFER.,.
Vendedor: H.-G. Zach Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lmz-1064</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>liftmaster l 3030</td> </tr> <tr> <td>year:</td> <td>2001</td> </tr> <tr> <td>length:</td> <td>6060 mm</td> </tr> <tr> <td>width:</td> <td>2300 mm</td> </tr> <tr> <td>height:</td> <td>2800 mm</td> </tr> <tr> <td>weight:</td> <td>4200kg</td> </tr> </tbody> </table> <br>

TECHNICAL DATA

ITEM NUMBER: LMZ-1064
MANUFACTURER: TRUMPF
TYPE: LIFTMASTER L 3030
YEAR: 2001
LENGTH: 6060 MM
WIDTH: 2300 MM
HEIGHT: 2800 MM
WEIGHT: 4200KG

Vendedor: I-H&S GmbH
Año de construcción: usado
Ubicación: Land-technical data:

workspace 2585 x 1280 mm
control siemens sinumerik 840 d
maximum punching force 220 kn
maximum sheet thickness 8 mm
maximum work-piece weight 200 kg
max cutting diameter 76.2 mm

-maximum positioning speed x-axis approx.: 90 m / min
-max. positioning speed y-axis approx.: 60 m / min - max positioning speed simultaneous approx.: 108 m/min - max. positioning speed axis of rotation approximately: turning through 360 â° / sec
-maximum lifting result punching 1 mm increment approximately: 780 1/min
-max stroke sequence punching 25 mm increment approx.: 355 1/min - max stroke episode signing ca: 1700 1/min
-position deviation: +/-0.1 mm
-repeatability: +/-0.03 mm
-single tool tool change time approx.: 1.5-5 s
-multi tool tool change time approx.: 1.5-5 s
-total connected load electrically approx.: 17 kva
-pneumatic connection approx.: 7 bar
-space requirement approx.: 7,900 x 6,300 x 2,200 mm
-approximate weight: 13,000 kg

standard:

-sturdy c frame
-coordinate guide with integrated linear magazine, 19 tool 2 clamps
-drives: maintenance-free three-phase servomotors
-programmable presser to set up
-sensor-controlled part slides for punching and laser station, expression cylinder on laser slide
-laser unit: co coâ² tlf 2400 turbo, vibration-isolated, integrated in machine frame incl. cooling unit and laser control tasc 200
-laser cutting head: 5 "-lens, quick change facility, distance control slides iii - die head: hydr." mono tool holder, 360 â° rotation for all tools, automatic tool length compensation, tool spray lubrication, punching slug extraction
-control: open control on pc-based, easy to use, online help, diagnostics, maintenance logbook, technology data, teleservice, online documentation, built-in floppy disk drive
-security: multi-beam photoelectric, laser monitoring system, emergency shut-down, hydraulic, extraction and compact dust extractor, protection against scattered radiation on the cutting head
-electrical equipment for three-phase 400 v / 50 hz
-colour: white structure lacquer ral 9002 / gentian blue ral 5010

advanced features:

-contourlas
multi tool control
-soft punch
-thread forming
-additional clamping claw
-vibration-damped installation
-automatic switch-off
-quickload
-bulge detection
-chip conveyor with tank

automation:

-sheetmaster incl. scissor lift table
-trumagrip

(errors and omissions in the technical data, information and prices and subject to prior sale!) 
 TECHNICAL DATA: WORKSPACE 2585 X 1280 MM CONTROL SIEMENS SINUMERIK 840 D MAXIMUM PUNCHING FORCE 220 KN MAXIMUM SHEET THICKNESS 8 MM MAXIMUM WORK-PIECE WEIGHT 200 KG MAX CUTTING DIAMETER 76.2 MM -MAXIMUM POSITIONING SPEED X-AXIS APPROX.: 90 M / MIN -MAX. POSITIONING SPEED Y-AXIS APPROX.: 60 M / MIN - MAX POSITIONING SPEED SIMULTANEOUS APPROX.: 108 M/MIN - MAX. POSITIONING SPEED AXIS OF ROTATION APPROXIMATELY: TURNING THROUGH 360 &ACIRC;&DEG; / SEC -MAXIMUM LIFTING RESULT PUNCHING 1 MM INCREMENT APPROXIMATELY: 780 1/MIN -MAX STROKE SEQUENCE PUNCHING 25 MM INCREMENT APPROX.: 355 1/MIN - MAX STROKE EPISODE SIGNING CA: 1700 1/MIN -POSITION DEVIATION: +/-0.1 MM -REPEATABILITY: +/-0.03 MM -SINGLE TOOL TOOL CHANGE TIME APPROX.: 1.5-5 S -MULTI TOOL TOOL CHANGE TIME APPROX.: 1.5-5 S -TOTAL CONNECTED LOAD ELECTRICALLY APPROX.: 17 KVA -PNEUMATIC CONNECTION APPROX.: 7 BAR -SPACE REQUIREMENT APPROX.: 7,900 X 6,300 X 2,200 MM -APPROXIMATE WEIGHT: 13,000 KG STANDARD: -STURDY C FRAME -COORDINATE GUIDE WITH INTEGRATED LINEAR MAGAZINE, 19 TOOL 2 CLAMPS -DRIVES: MAINTENANCE-FREE THREE-PHASE SERVOMOTORS -PROGRAMMABLE PRESSER TO SET UP -SENSOR-CONTROLLED PART SLIDES FOR PUNCHING AND LASER STATION, EXPRESSION CYLINDER ON LASER SLIDE -LASER UNIT: CO CO&ACIRC;&SUP2; TLF 2400 TURBO, VIBRATION-ISOLATED, INTEGRATED IN MACHINE FRAME INCL. COOLING UNIT AND LASER CONTROL TASC 200 -LASER CUTTING HEAD: 5 "-LENS, QUICK CHANGE FACILITY, DISTANCE CONTROL SLIDES III - DIE HEAD: HYDR." MONO TOOL HOLDER, 360 &ACIRC;&DEG; ROTATION FOR ALL TOOLS, AUTOMATIC TOOL LENGTH COMPENSATION, TOOL SPRAY LUBRICATION, PUNCHING SLUG EXTRACTION -CONTROL: OPEN CONTROL ON PC-BASED, EASY TO USE, ONLINE HELP, DIAGNOSTICS, MAINTENANCE LOGBOOK, TECHNOLOGY DATA, TELESERVICE, ONLINE DOCUMENTATION, BUILT-IN FLOPPY DISK DRIVE -SECURITY: MULTI-BEAM PHOTOELECTRIC, LASER MONITORING SYSTEM, EMERGENCY SHUT-DOWN, HYDRAULIC, EXTRACTION AND COMPACT DUST EXTRACTOR, PROTECTION AGAINST SCATTERED RADIATION ON THE CUTTING HEAD -ELECTRICAL EQUIPMENT FOR THREE-PHASE 400 V / 50 HZ -COLOUR: WHITE STRUCTURE LACQUER RAL 9002 / GENTIAN BLUE RAL 5010 ADVANCED FEATURES: -CONTOURLAS MULTI TOOL CONTROL -SOFT PUNCH -THREAD FORMING -ADDITIONAL CLAMPING CLAW -VIBRATION-DAMPED INSTALLATION -AUTOMATIC SWITCH-OFF -QUICKLOAD -BULGE DETECTION -CHIP CONVEYOR WITH TANK AUTOMATION: -SHEETMASTER INCL. SCISSOR LIFT TABLE -TRUMAGRIP (ERRORS AND OMISSIONS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: imc solutions GmbH
Año de construcción: usado
Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lmz-1060</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>loadmaster</td> </tr> <tr> <td>year:</td> <td>2008</td> </tr> <tr> <td>length:</td> <td> </td> </tr> <tr> <td>width:</td> <td> </td> </tr> <tr> <td>height:</td> <td> </td> </tr> <tr> <td>weight:</td> <td>2800 kg</td> </tr> </tbody> </table> <br>

TECHNICAL DATA

ITEM NUMBER: LMZ-1060
MANUFACTURER: TRUMPF
TYPE: LOADMASTER
YEAR: 2008
LENGTH:
WIDTH:
HEIGHT:
WEIGHT: 2800 KG

Vendedor: I-H&S GmbH
Año de construcción: usado
Ubicación: Land-technical data:

working field 4.000 x 2.000 x 115 mm
control siemens sinumerik 840 d
laser power 6,000 watts
maximum sheet thickness mild steel 25 mm
maximum sheet thickness stainless steel 25 mm
maximum sheet thickness aluminium 15 mm

standard equipment:

-closed machine frame with integrated laseragregat
-laser unit: co2 laser truflow 5000 high frequency angeregt, maintenance-free turbo centrifugal blower, cooling unit logbuchbunktion
-automatic pallet changer
-longitudinal conveyor for small parts/waste
-drives: gantry drive in combination with direct linear drives
-universal die head quick change facility uti with fieldbus connection
-laser cutting head with a 250 mm lens
-cutting gas pressure setting can be programmed
-controlline capacitive height control and process control
-automatic focus position adjustment focusline
-laser power control
-position laser diode
-fastline
-nitroline high pressure cutting
-fast processing with sprintline in all thicknesses
-contourline for making small holes
-plasmaline
-automatic sheet metal outer edge detection
-pierceline
-programmable power cycles
-microweld
-automatic nozzle cleaning
-spraying device for secure thick sheet metal
-automatic switch-off
-lighting of workroom
-control sinumerik 840 d: integrated open control on pc-based, easy to use, online help, e-shop, diagnostics, maintenance logbook, technology data, tele-service - shop floor programming
-security: mehrstrahlige light barriers, jet tours is fully encapsulated and monitoring system, multi chamber extraction and compact dust collector, cab ventilated with nitrogen,
-network connection (rj45) by installing via tele-service
-usb
-tft color display
-voltage 400 v
-frequency 50 hz
-electrical requirement iec
-painting: standard ral9002/5010

advanced features:

-more powerful laser truflow 6000 (6 kw)
-preparation for retrofitting liftmaster

(errors and omissions in the technical data, information and prices and subject to prior sale!)
 TECHNICAL DATA: WORKING FIELD 4.000 X 2.000 X 115 MM CONTROL SIEMENS SINUMERIK 840 D LASER POWER 6,000 WATTS MAXIMUM SHEET THICKNESS MILD STEEL 25 MM MAXIMUM SHEET THICKNESS STAINLESS STEEL 25 MM MAXIMUM SHEET THICKNESS ALUMINIUM 15 MM STANDARD EQUIPMENT: -CLOSED MACHINE FRAME WITH INTEGRATED LASERAGREGAT -LASER UNIT: CO2 LASER TRUFLOW 5000 HIGH FREQUENCY ANGEREGT, MAINTENANCE-FREE TURBO CENTRIFUGAL BLOWER, COOLING UNIT LOGBUCHBUNKTION -AUTOMATIC PALLET CHANGER -LONGITUDINAL CONVEYOR FOR SMALL PARTS/WASTE -DRIVES: GANTRY DRIVE IN COMBINATION WITH DIRECT LINEAR DRIVES -UNIVERSAL DIE HEAD QUICK CHANGE FACILITY UTI WITH FIELDBUS CONNECTION -LASER CUTTING HEAD WITH A 250 MM LENS -CUTTING GAS PRESSURE SETTING CAN BE PROGRAMMED -CONTROLLINE CAPACITIVE HEIGHT CONTROL AND PROCESS CONTROL -AUTOMATIC FOCUS POSITION ADJUSTMENT FOCUSLINE -LASER POWER CONTROL -POSITION LASER DIODE -FASTLINE -NITROLINE HIGH PRESSURE CUTTING -FAST PROCESSING WITH SPRINTLINE IN ALL THICKNESSES -CONTOURLINE FOR MAKING SMALL HOLES -PLASMALINE -AUTOMATIC SHEET METAL OUTER EDGE DETECTION -PIERCELINE -PROGRAMMABLE POWER CYCLES -MICROWELD -AUTOMATIC NOZZLE CLEANING -SPRAYING DEVICE FOR SECURE THICK SHEET METAL -AUTOMATIC SWITCH-OFF -LIGHTING OF WORKROOM -CONTROL SINUMERIK 840 D: INTEGRATED OPEN CONTROL ON PC-BASED, EASY TO USE, ONLINE HELP, E-SHOP, DIAGNOSTICS, MAINTENANCE LOGBOOK, TECHNOLOGY DATA, TELE-SERVICE - SHOP FLOOR PROGRAMMING -SECURITY: MEHRSTRAHLIGE LIGHT BARRIERS, JET TOURS IS FULLY ENCAPSULATED AND MONITORING SYSTEM, MULTI CHAMBER EXTRACTION AND COMPACT DUST COLLECTOR, CAB VENTILATED WITH NITROGEN, -NETWORK CONNECTION (RJ45) BY INSTALLING VIA TELE-SERVICE -USB -TFT COLOR DISPLAY -VOLTAGE 400 V -FREQUENCY 50 HZ -ELECTRICAL REQUIREMENT IEC -PAINTING: STANDARD RAL9002/5010 ADVANCED FEATURES: -MORE POWERFUL LASER TRUFLOW 6000 (6 KW) -PREPARATION FOR RETROFITTING LIFTMASTER (ERRORS AND OMISSIONS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: imc solutions GmbH
Año de construcción: usado
Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lmz-1056</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>liftmaster sort</td> </tr> <tr> <td>year:</td> <td>2003</td> </tr> <tr> <td>length:</td> <td>6060 mm</td> </tr> <tr> <td>width:</td> <td>2300 mm</td> </tr> <tr> <td>height:</td> <td>2800 mm</td> </tr> <tr> <td>weight:</td> <td>4200 kg</td> </tr> </tbody> </table> <br> \n<strong> </strong> </h3> </h3>\n<strong> </strong> </h3>

TECHNICAL DATA

ITEM NUMBER: LMZ-1056
MANUFACTURER: TRUMPF
TYPE: LIFTMASTER SORT
YEAR: 2003
LENGTH: 6060 MM
WIDTH: 2300 MM
HEIGHT: 2800 MM
WEIGHT: 4200 KG

\N \N
Vendedor: I-H&S GmbH
Año de construcción: usado
Precio: 800 €
Ubicación: Land-mint multi tool 12 stamps recording cpl. with matrix

-stamping punch recording trump id: 075559
-die trump id: 060766
-used articles, including embossing stamp l, e, f, t, 1-8
-np: â?¬1985,-stamp, 55,-â?¬ die, â?¬118 embossing tools

suitable for trumpf laserpress tc600l, punching machine tc 500 MINT MULTI TOOL 12 STAMPS RECORDING CPL. WITH MATRIX -STAMPING PUNCH RECORDING TRUMP ID: 075559 -DIE TRUMP ID: 060766 -USED ARTICLES, INCLUDING EMBOSSING STAMP L, E, F, T, 1-8 -NP: &ACIRC;?&NOT;1985,-STAMP, 55,-&ACIRC;?&NOT; DIE, &ACIRC;?&NOT;118 EMBOSSING TOOLS SUITABLE FOR TRUMPF LASERPRESS TC600L, PUNCHING MACHINE TC 500
Vendedor: MAFdirekt Maschinen- & Anlagenfachhandel Marcus Epple
Año de construcción: usado
Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lmz-1024</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>liftmaster l 3030</td> </tr> <tr> <td>year:</td> <td>1998</td> </tr> <tr> <td>length:</td> <td>6060 mm</td> </tr> <tr> <td>width:</td> <td>2300 mm</td> </tr> <tr> <td>height:</td> <td>2800 mm</td> </tr> <tr> <td>weight:</td> <td>4200 kg</td> </tr> </tbody> </table> <br> <h3> <strong>liftmaster r for trumpf trumatic l 3030 </strong> </h3>\n \nmax. sheet size (loading / unloading): 3000 x 1500 mm</h3>\nmax. sheet thickness (unloading): 20mm</h3>\nmax. suction force: 7200 n</h3>\n</h3> \n</h3>

TECHNICAL DATA

ITEM NUMBER: LMZ-1024
MANUFACTURER: TRUMPF
TYPE: LIFTMASTER L 3030
YEAR: 1998
LENGTH: 6060 MM
WIDTH: 2300 MM
HEIGHT: 2800 MM
WEIGHT: 4200 KG

LIFTMASTER R FOR TRUMPF TRUMATIC L 3030

\N \NMAX. SHEET SIZE (LOADING / UNLOADING): 3000 X 1500 MM\NMAX. SHEET THICKNESS (UNLOADING): 20MM\NMAX. SUCTION FORCE: 7200 N\N \N
Vendedor: I-H&S GmbH
Año de construcción: usado
Precio: 750 €
Ubicación: Land-alternative, new box bellows for trumpf l3030 siemens

-from german production (it is not an original by trump)
-y-axis (c)
-mapping: trump id: 1667805 / 939016
-new part ALTERNATIVE, NEW BOX BELLOWS FOR TRUMPF L3030 SIEMENS -FROM GERMAN PRODUCTION (IT IS NOT AN ORIGINAL BY TRUMP) -Y-AXIS (C) -MAPPING: TRUMP ID: 1667805 / 939016 -NEW PART
Vendedor: MAFdirekt Maschinen- & Anlagenfachhandel Marcus Epple
Año de construcción: usado
Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1718</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trumatic l 3050</td> </tr> <tr> <td>year:</td> <td>2006</td> </tr> <tr> <td>working area:</td> <td>3000 x 1500 x 115 mm</td> </tr> <tr> <td>laser rated output:</td> <td>5000 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>70212 / 42489 h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>25 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>20 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>12 mm</td> </tr> <tr> <td>max. speed:</td> <td>200 / 300 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>0,1 mm</td> </tr> <tr> <td>length:</td> <td>11000 mm</td> </tr> <tr> <td>width:</td> <td>4600 mm</td> </tr> <tr> <td>height:</td> <td>2400 mm</td> </tr> <tr> <td>weight:</td> <td>12000 kg</td> </tr> </tbody> </table> <br> \n<strong> </strong> </h3> \n<strong> </strong> </h3> \n<strong> </strong> </h3> <h3> <strong>standard configuration</strong> </h3>\n<strong> </strong> </h3> \n<strong> </strong> </h3>· </h3>closed machine frame with integrated laser unit</h3>\n</h3>· </h3>laser unit: co2 laser tlf 5000, radio-frequency excited, chiller, logbook function laser</h3>\n</h3>· </h3>automatic pallet changer and longitudinal conveyor for small parts / slag</h3>\n</h3>· </h3>drives: gantry drive in combination with linear direct drives</h3>\n</h3>· </h3>laser power control</h3>\n</h3>· </h3>hi-las high pressure cutting</h3>\n</h3>· </h3>plasma sensor system pss</h3>\n</h3>· </h3>pcs process control system</h3>\n</h3>· </h3>dias capacitive height regulation</h3>\n</h3>· </h3>high-speed processing with sprintlas</h3>\n</h3>· </h3>contourlas for producing small holes</h3>\n</h3>· </h3>programmable cutting gas pressure setting</h3>\n</h3>\n	<ul>\n	<li> </h3> apc advanced process control</h3> </li>\n	<li> </h3> </h3> automatic nozzle cleaning</h3> </li>\n</ul> </h3>\n</h3>·</h3>laser cutting head with 5 lens and laser cutting head with 7.5 lens</h3>\n</h3>·</h3>cutting head quick-change device</h3>\n</h3>·</h3>automatic sheet edge detection</h3>\n</h3>·</h3>positioning laser diode</h3>\n</h3>·</h3>programmable power cycles</h3>\n</h3>·</h3>microweld</h3>\n</h3>·</h3>automatic focus adjustment autolas plus</h3>\n</h3>·</h3>oil spray device for reliable thick plate machining</h3>\n</h3>·</h3>automatic shutdown</h3>\n</h3>·</h3>work area lighting</h3>\n</h3>·</h3>sinumerik 840d control: open pc-based control system, easy to operate, online help, diagnostic functions, maintenance logbook, technology data, teleservice, rj 45 network connection, 3.5 disc drive, tft color screen</h3>\n</h3>·</h3>shopfloor programming tops 100 lite</h3>\n</h3>·</h3>safety: multi-beam light barriers, completely encapsulated beam delivery purged with nitrogen, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin</h3>\n</h3> \n</h3> <h3> <strong>additional equipment</strong> </h3>\n<strong> </strong> </h3> \n<strong> </strong> </h3>·</h3>compressed air cutting</h3>\n</h3>·</h3>mdr machine data recording</h3>\n</h3> \n</h3> <h3> <strong>automation</strong> </h3>\n<strong> </strong> </h3>·</h3>preparation liftmaster</h3>\n</h3> \n</h3>

TECHNICAL DATA

ITEM NUMBER: LM-1718
MANUFACTURER: TRUMPF
TYPE: TRUMATIC L 3050
YEAR: 2006
WORKING AREA: 3000 X 1500 X 115 MM
LASER RATED OUTPUT: 5000 WATT
CONTROL: SIEMENS SINUMERIK 840 D
WORKING HOUR: 70212 / 42489 H
MAX. SHEET THICK./ST: 25 MM
MAX. SHEET THICK./VA: 20 MM
MAX. SHEET THICK./AI: 12 MM
MAX. SPEED: 200 / 300 M/MIN
POSITIONING ACCURACY: 0,1 MM
LENGTH: 11000 MM
WIDTH: 4600 MM
HEIGHT: 2400 MM
WEIGHT: 12000 KG

\N \N \N

STANDARD CONFIGURATION

\N \N · CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT\N· LASER UNIT: CO2 LASER TLF 5000, RADIO-FREQUENCY EXCITED, CHILLER, LOGBOOK FUNCTION LASER\N· AUTOMATIC PALLET CHANGER AND LONGITUDINAL CONVEYOR FOR SMALL PARTS / SLAG\N· DRIVES: GANTRY DRIVE IN COMBINATION WITH LINEAR DIRECT DRIVES\N· LASER POWER CONTROL\N· HI-LAS HIGH PRESSURE CUTTING\N· PLASMA SENSOR SYSTEM PSS\N· PCS PROCESS CONTROL SYSTEM\N· DIAS CAPACITIVE HEIGHT REGULATION\N· HIGH-SPEED PROCESSING WITH SPRINTLAS\N· CONTOURLAS FOR PRODUCING SMALL HOLES\N· PROGRAMMABLE CUTTING GAS PRESSURE SETTING\N\N
    \N
  • APC ADVANCED PROCESS CONTROL
  • \N
  • AUTOMATIC NOZZLE CLEANING
  • \N
\N·LASER CUTTING HEAD WITH 5 LENS AND LASER CUTTING HEAD WITH 7.5 LENS\N·CUTTING HEAD QUICK-CHANGE DEVICE\N·AUTOMATIC SHEET EDGE DETECTION\N·POSITIONING LASER DIODE\N·PROGRAMMABLE POWER CYCLES\N·MICROWELD\N·AUTOMATIC FOCUS ADJUSTMENT AUTOLAS PLUS\N·OIL SPRAY DEVICE FOR RELIABLE THICK PLATE MACHINING\N·AUTOMATIC SHUTDOWN\N·WORK AREA LIGHTING\N·SINUMERIK 840D CONTROL: OPEN PC-BASED CONTROL SYSTEM, EASY TO OPERATE, ONLINE HELP, DIAGNOSTIC FUNCTIONS, MAINTENANCE LOGBOOK, TECHNOLOGY DATA, TELESERVICE, RJ 45 NETWORK CONNECTION, 3.5 DISC DRIVE, TFT COLOR SCREEN\N·SHOPFLOOR PROGRAMMING TOPS 100 LITE\N·SAFETY: MULTI-BEAM LIGHT BARRIERS, COMPLETELY ENCAPSULATED BEAM DELIVERY PURGED WITH NITROGEN, MONITORING SYSTEM, MULTI-CHAMBER EXTRACTION SYSTEM AND COMPACT DUST EXTRACTOR, SAFETY CABIN\N \N

ADDITIONAL EQUIPMENT

\N \N ·COMPRESSED AIR CUTTING\N·MDR MACHINE DATA RECORDING\N \N

AUTOMATION

\N ·PREPARATION LIFTMASTER\N \N
Vendedor: I-H&S GmbH
Año de construcción: usado
Precio: 5.000 €
Ubicación: Land-software license dongle v24 tops 100 windows - year 2004

-programming software by trumpf
-dongle must be rewritten to buyer (additional cost!)
-license can be updated (charge!)
-universal for trumpf machines

error in the data and intermediate sale reserve. SOFTWARE LICENSE DONGLE V24 TOPS 100 WINDOWS - YEAR 2004 -PROGRAMMING SOFTWARE BY TRUMPF -DONGLE MUST BE REWRITTEN TO BUYER (ADDITIONAL COST!) -LICENSE CAN BE UPDATED (CHARGE!) -UNIVERSAL FOR TRUMPF MACHINES ERROR IN THE DATA AND INTERMEDIATE SALE RESERVE.
Vendedor: MAFdirekt Maschinen- & Anlagenfachhandel Marcus Epple
Año de construcción: usado
Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1712</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trulaser 5030 fiber (l56)</td> </tr> <tr> <td>year:</td> <td>2014</td> </tr> <tr> <td>working area:</td> <td>3000 x 1500 x 115 mm</td> </tr> <tr> <td>laser rated output:</td> <td>5000 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>14458 / 11547 h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>25 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>25 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>25 mm</td> </tr> <tr> <td>max. speed:</td> <td>265 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>0,10</td> </tr> <tr> <td>length:</td> <td>8800 mm</td> </tr> <tr> <td>width:</td> <td>4800 mm</td> </tr> <tr> <td>height:</td> <td>2400 mm</td> </tr> <tr> <td>weight:</td> <td>12000 kg</td> </tr> </tbody> </table> <br> \n</h3> \n</h3> \n</h3> <h3> <strong>standard configuration</strong> </h3>\n</h3> \n<strong>machine</strong> </h3>\n</h3>\n	<ul>\n	<li> </h3>closed machine frame </h3> </li>\n	<li> </h3> </h3>integrated cabinet</h3> </li>\n	<li> </h3> </h3>automatic pallet changer lengthwise installation</h3> </li>\n	<li> </h3> </h3>torque drive in combination with direct linear drives</h3> </li>\n	<li> </h3> </h3>enclosed beam delivery via fiber optic cable</h3> </li>\n	<li> </h3> </h3>chiller for machine cooling (water-air)</h3> </li>\n	<li> </h3> </h3>integrated eletrical cabinets with inside light</h3> </li>\n	<li> </h3> </h3>power supply trudisk via the machine</h3> </li>\n	<li> </h3> </h3>longitudinal conveyor</h3> </li>\n	<li> </h3> </h3>working area lighting</h3> </li>\n	<li> </h3> </h3>positioning laser diode</h3> </li>\n	<li> </h3> </h3>spray device</h3> </li>\n	<li> </h3> </h3>pierceline</h3> </li>\n	<li> </h3> </h3>focusline</h3> </li>\n	<li> </h3> </h3>nitroline</h3> </li>\n	<li> </h3> </h3>plasmaline</h3> </li>\n	<li> </h3> </h3>automatic nozzle cleaning</h3> </li>\n</ul> </h3>\n</h3> \n<strong>trumpf laser </strong> </h3>\n</h3>\n	<ul>\n	<li> </h3>solid state laser trudisk 5001 with 1 llk output </h3> </li>\n	<li> </h3> </h3>fiber optic cable according standard layout (laser next to the machine)</h3> </li>\n	<li> </h3> </h3>laser chiller unit (water-air)</h3> </li>\n	<li> </h3> </h3>stimulation via pump diodes</h3> </li>\n	<li> </h3> </h3>laser power control</h3> </li>\n</ul> </h3>\n</h3> \n<strong>cutting head</strong> </h3>\n</h3>\n	<ul>\n	<li> </h3>universal cutting head with complete adaptive lense system</h3> </li>\n	<li> </h3> </h3>one cutting head strategy</h3> </li>\n	<li> </h3> </h3>protection glass to avoid lense contamination</h3> </li>\n	<li> </h3> </h3>protection glass monitoring</h3> </li>\n	<li> </h3> </h3>controlline: height regulation and sheet edge detection</h3> </li>\n</ul> </h3>\n</h3> \n<strong>control</strong> </h3>\n</h3>\n	<ul>\n	<li> </h3>advanced shop floor programming (trutops via network access)</h3> </li>\n	<li> </h3> </h3>easy shop floor programming</h3> </li>\n	<li> </h3> </h3>sinumerik 840d sl</h3> </li>\n	<li> </h3> </h3>17 touch panel</h3> </li>\n	<li> </h3> </h3>fast reproduction</h3> </li>\n	<li> </h3> </h3>technology data is integrated</h3> </li>\n	<li> </h3> </h3>automatic shutdown</h3> </li>\n	<li> </h3> </h3>programmable cutting gas pressure</h3> </li>\n	<li> </h3> </h3>fastline</h3> </li>\n	<li> </h3> </h3>flyline</h3> </li>\n	<li> </h3> </h3>adjustline</h3> </li>\n	<li> </h3> </h3>teleservice via internet</h3> </li>\n	<li> </h3> </h3>integrated e-shop</h3> </li>\n</ul> </h3>\n</h3> \n<strong>data transmission</strong> </h3>\n</h3>\n	<ul>\n	<li> </h3>rj45 network connection </h3> </li>\n	<li> </h3> </h3>usb interface</h3> </li>\n</ul> </h3>\n</h3> \n<strong>safety</strong> </h3>\n</h3>\n	<ul>\n	<li> </h3>ce label</h3> </li>\n	<li> </h3> </h3>light barriers</h3> </li>\n	<li> </h3> </h3>multi-chamber extraction system </h3> </li>\n	<li> </h3> </h3>compact dust extractor</h3> </li>\n	<li> </h3> </h3>machine enclosure with certificated window (right door)</h3> </li>\n	<li> </h3> </h3>electrical curl up roof</h3> </li>\n</ul> </h3>\n</h3> \n</h3>

TECHNICAL DATA

ITEM NUMBER: LM-1712
MANUFACTURER: TRUMPF
TYPE: TRULASER 5030 FIBER (L56)
YEAR: 2014
WORKING AREA: 3000 X 1500 X 115 MM
LASER RATED OUTPUT: 5000 WATT
CONTROL: SIEMENS SINUMERIK 840 D
WORKING HOUR: 14458 / 11547 H
MAX. SHEET THICK./ST: 25 MM
MAX. SHEET THICK./VA: 25 MM
MAX. SHEET THICK./AI: 25 MM
MAX. SPEED: 265 M/MIN
POSITIONING ACCURACY: 0,10
LENGTH: 8800 MM
WIDTH: 4800 MM
HEIGHT: 2400 MM
WEIGHT: 12000 KG

\N \N \N

STANDARD CONFIGURATION

\N \NMACHINE \N\N
    \N
  • CLOSED MACHINE FRAME
  • \N
  • INTEGRATED CABINET
  • \N
  • AUTOMATIC PALLET CHANGER LENGTHWISE INSTALLATION
  • \N
  • TORQUE DRIVE IN COMBINATION WITH DIRECT LINEAR DRIVES
  • \N
  • ENCLOSED BEAM DELIVERY VIA FIBER OPTIC CABLE
  • \N
  • CHILLER FOR MACHINE COOLING (WATER-AIR)
  • \N
  • INTEGRATED ELETRICAL CABINETS WITH INSIDE LIGHT
  • \N
  • POWER SUPPLY TRUDISK VIA THE MACHINE
  • \N
  • LONGITUDINAL CONVEYOR
  • \N
  • WORKING AREA LIGHTING
  • \N
  • POSITIONING LASER DIODE
  • \N
  • SPRAY DEVICE
  • \N
  • PIERCELINE
  • \N
  • FOCUSLINE
  • \N
  • NITROLINE
  • \N
  • PLASMALINE
  • \N
  • AUTOMATIC NOZZLE CLEANING
  • \N
\N \NTRUMPF LASER \N\N
    \N
  • SOLID STATE LASER TRUDISK 5001 WITH 1 LLK OUTPUT
  • \N
  • FIBER OPTIC CABLE ACCORDING STANDARD LAYOUT (LASER NEXT TO THE MACHINE)
  • \N
  • LASER CHILLER UNIT (WATER-AIR)
  • \N
  • STIMULATION VIA PUMP DIODES
  • \N
  • LASER POWER CONTROL
  • \N
\N \NCUTTING HEAD \N\N
    \N
  • UNIVERSAL CUTTING HEAD WITH COMPLETE ADAPTIVE LENSE SYSTEM
  • \N
  • ONE CUTTING HEAD STRATEGY
  • \N
  • PROTECTION GLASS TO AVOID LENSE CONTAMINATION
  • \N
  • PROTECTION GLASS MONITORING
  • \N
  • CONTROLLINE: HEIGHT REGULATION AND SHEET EDGE DETECTION
  • \N
\N \NCONTROL \N\N
    \N
  • ADVANCED SHOP FLOOR PROGRAMMING (TRUTOPS VIA NETWORK ACCESS)
  • \N
  • EASY SHOP FLOOR PROGRAMMING
  • \N
  • SINUMERIK 840D SL
  • \N
  • 17 TOUCH PANEL
  • \N
  • FAST REPRODUCTION
  • \N
  • TECHNOLOGY DATA IS INTEGRATED
  • \N
  • AUTOMATIC SHUTDOWN
  • \N
  • PROGRAMMABLE CUTTING GAS PRESSURE
  • \N
  • FASTLINE
  • \N
  • FLYLINE
  • \N
  • ADJUSTLINE
  • \N
  • TELESERVICE VIA INTERNET
  • \N
  • INTEGRATED E-SHOP
  • \N
\N \NDATA TRANSMISSION \N\N
    \N
  • RJ45 NETWORK CONNECTION
  • \N
  • USB INTERFACE
  • \N
\N \NSAFETY \N\N
    \N
  • CE LABEL
  • \N
  • LIGHT BARRIERS
  • \N
  • MULTI-CHAMBER EXTRACTION SYSTEM
  • \N
  • COMPACT DUST EXTRACTOR
  • \N
  • MACHINE ENCLOSURE WITH CERTIFICATED WINDOW (RIGHT DOOR)
  • \N
  • ELECTRICAL CURL UP ROOF
  • \N
\N \N
Vendedor: I-H&S GmbH
Año de construcción: usado
Precio: 1.800 €
Ubicación: Land-trumpf cutting head 3.75 inch trump id: 911218 / 1261653

-used cutting head, technically and visually in very good condition

suitable for trumpf l3030/3050/3530/4030/4050/6030/6050 TRUMPF CUTTING HEAD 3.75 INCH TRUMP ID: 911218 / 1261653 -USED CUTTING HEAD, TECHNICALLY AND VISUALLY IN VERY GOOD CONDITION SUITABLE FOR TRUMPF L3030/3050/3530/4030/4050/6030/6050
Vendedor: MAFdirekt Maschinen- & Anlagenfachhandel Marcus Epple
Año de construcción: usado
Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1598</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trumatic l 6030</td> </tr> <tr> <td>year:</td> <td>2005</td> </tr> <tr> <td>working area:</td> <td>6000 x 2000 x 115 mm</td> </tr> <tr> <td>laser rated output:</td> <td>3200 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>67.440h / 47.290h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>20 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>12 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>8 mm</td> </tr> <tr> <td>max. speed:</td> <td>60/85 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>+/- 0,1 mm</td> </tr> <tr> <td>length:</td> <td>16100 mm</td> </tr> <tr> <td>width:</td> <td>5200 mm</td> </tr> <tr> <td>height:</td> <td>2000 mm</td> </tr> <tr> <td>weight:</td> <td>21500 kg</td> </tr> </tbody> </table> <br> \n \n \n<h3> <strong>standard configuration</strong> </h3>\n \n</h3>\n	<ul>\n	<li> </h3>closed machine frame with integrated laser unit</h3> </li>\n	<li> </h3> </h3>laser unit: co2 laser tlf 3200, <strong>reconditioned including 6 months warranty,</strong> lens monitoring sensor, radio-frequency excited, mirror telescope, chiller</h3> </li>\n	<li> </h3> </h3>automatic pallet changer and longitudinal conveyor for small parts / slag</h3> </li>\n	<li> </h3> </h3>drives with maintenance-free servo motors</h3> </li>\n	<li> </h3> </h3>hi-las high pressure cutting</h3> </li>\n	<li> </h3> </h3>plasma sensor system</h3> </li>\n	<li> </h3> </h3>high-speed processing with sprintlas</h3> </li>\n	<li> </h3> </h3>contourlas for producing small holes</h3> </li>\n	<li> </h3> </h3>microweld</h3> </li>\n	<li> </h3> </h3>programmable cutting gas pressure setting</h3> </li>\n	<li> </h3> </h3>laser cutting head with 5 lens </h3> </li>\n	<li> </h3> </h3>laser cutting head with 7.5 lens, dias iii</h3> </li>\n	<li> </h3> </h3>cutting head quick-change device</h3> </li>\n	<li> </h3> </h3>programmable power cycles</h3> </li>\n	<li> </h3> </h3>positioning laser diode</h3> </li>\n	<li> </h3> </h3>automatic sheet edge detection </h3> </li>\n	<li> </h3> </h3>automatic focus setting autolas plus</h3> </li>\n	<li> </h3> </h3>oil spray device for reliable thick plate machining</h3> </li>\n	<li> </h3> </h3>laser logbook function</h3> </li>\n	<li> </h3> </h3>automatic shutdown</h3> </li>\n	<li> </h3> </h3>work area lighting</h3> </li>\n	<li> </h3> </h3>sinumerik 840d control: open pc-based control system, easy to use, online help, diagnostic functions, maintenance logbook, technology data, teleservice, 3.5 disk drive, bnc-/rj45 connection</h3> </li>\n	<li> </h3> </h3>shopfloor programming tops 100 lite</h3> </li>\n	<li> </h3> </h3>safety: multi-beam light barriers, completely encapsulated and purged beam delivery, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin</h3> </li>\n</ul> </h3>\n</h3> \n</h3> <h3> <strong>additional equipment</strong> </h3>\n \n</h3>\n	<ul>\n	<li> </h3>mdr integrated machine data recording</h3> </li>\n	<li> </h3> </h3>grooving end detection</h3> </li>\n	<li> </h3> </h3>mde interface</h3> </li>\n</ul> </h3>\n</h3>

TECHNICAL DATA

ITEM NUMBER: LM-1598
MANUFACTURER: TRUMPF
TYPE: TRUMATIC L 6030
YEAR: 2005
WORKING AREA: 6000 X 2000 X 115 MM
LASER RATED OUTPUT: 3200 WATT
CONTROL: SIEMENS SINUMERIK 840 D
WORKING HOUR: 67.440H / 47.290H
MAX. SHEET THICK./ST: 20 MM
MAX. SHEET THICK./VA: 12 MM
MAX. SHEET THICK./AI: 8 MM
MAX. SPEED: 60/85 M/MIN
POSITIONING ACCURACY: +/- 0,1 MM
LENGTH: 16100 MM
WIDTH: 5200 MM
HEIGHT: 2000 MM
WEIGHT: 21500 KG

\N \N \N

STANDARD CONFIGURATION

\N \N\N
    \N
  • CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT
  • \N
  • LASER UNIT: CO2 LASER TLF 3200, RECONDITIONED INCLUDING 6 MONTHS WARRANTY, LENS MONITORING SENSOR, RADIO-FREQUENCY EXCITED, MIRROR TELESCOPE, CHILLER
  • \N
  • AUTOMATIC PALLET CHANGER AND LONGITUDINAL CONVEYOR FOR SMALL PARTS / SLAG
  • \N
  • DRIVES WITH MAINTENANCE-FREE SERVO MOTORS
  • \N
  • HI-LAS HIGH PRESSURE CUTTING
  • \N
  • PLASMA SENSOR SYSTEM
  • \N
  • HIGH-SPEED PROCESSING WITH SPRINTLAS
  • \N
  • CONTOURLAS FOR PRODUCING SMALL HOLES
  • \N
  • MICROWELD
  • \N
  • PROGRAMMABLE CUTTING GAS PRESSURE SETTING
  • \N
  • LASER CUTTING HEAD WITH 5 LENS
  • \N
  • LASER CUTTING HEAD WITH 7.5 LENS, DIAS III
  • \N
  • CUTTING HEAD QUICK-CHANGE DEVICE
  • \N
  • PROGRAMMABLE POWER CYCLES
  • \N
  • POSITIONING LASER DIODE
  • \N
  • AUTOMATIC SHEET EDGE DETECTION
  • \N
  • AUTOMATIC FOCUS SETTING AUTOLAS PLUS
  • \N
  • OIL SPRAY DEVICE FOR RELIABLE THICK PLATE MACHINING
  • \N
  • LASER LOGBOOK FUNCTION
  • \N
  • AUTOMATIC SHUTDOWN
  • \N
  • WORK AREA LIGHTING
  • \N
  • SINUMERIK 840D CONTROL: OPEN PC-BASED CONTROL SYSTEM, EASY TO USE, ONLINE HELP, DIAGNOSTIC FUNCTIONS, MAINTENANCE LOGBOOK, TECHNOLOGY DATA, TELESERVICE, 3.5 DISK DRIVE, BNC-/RJ45 CONNECTION
  • \N
  • SHOPFLOOR PROGRAMMING TOPS 100 LITE
  • \N
  • SAFETY: MULTI-BEAM LIGHT BARRIERS, COMPLETELY ENCAPSULATED AND PURGED BEAM DELIVERY, MONITORING SYSTEM, MULTI-CHAMBER EXTRACTION SYSTEM AND COMPACT DUST EXTRACTOR, SAFETY CABIN
  • \N
\N \N

ADDITIONAL EQUIPMENT

\N \N\N
    \N
  • MDR INTEGRATED MACHINE DATA RECORDING
  • \N
  • GROOVING END DETECTION
  • \N
  • MDE INTERFACE
  • \N
\N
Vendedor: I-H&S GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more TRUMPF types: