192 ofertas

Año de construcción: usado
Ubicación: Land-union
machine name  horizontal boring machine
manufacturer  union
model  bft 1305
location  mumbai
year of manufacturing na
technical specification 
spindle diameter 130 mm spindle speed 4,5 - 900 rpm 
spindle cones morse 5 adaptor for iso 50 x axis 1600 mm y axis 1600 mm z axis UNION MACHINE NAME HORIZONTAL BORING MACHINE MANUFACTURER UNION MODEL BFT 1305 LOCATION MUMBAI YEAR OF MANUFACTURING NA TECHNICAL SPECIFICATION SPINDLE DIAMETER 130 MM SPINDLE SPEED 4,5 - 900 RPM SPINDLE CONES MORSE 5 ADAPTOR FOR ISO 50 X AXIS 1600 MM Y AXIS 1600 MM Z AXIS
Vendedor: Syndicate Machines Pvt. Ltd.
Año de construcción: usado
Ubicación:
general
hsc-precision centre - active chiller for main spindle and linear drives - active chiller for electrical cabinet - direct absolute measuring system with air purge - coolant-airblast changeover; control: 3d control heidenhain itnc 530 hsci
technical data
feed rate longitudinal/transverse/vertical 1-80000/1-80000/1-80000 mm/min
spindle taper hsk-e 50
rapid traverse longitudinal/transverse/vertical 80/80/80 m/min
working area 1
longitudinal 450 mm
cross 580 mm
vertical 460 mm
tool changer
application vertical
type of magazine chain
type of gripper double gripper
number of tools 120
floor space/weight
dimensions (l x w x h) 5,48 x 4,23 x 2,9 m
weight approx. 9500 kg


hsc55 linear 5-axis specification hsc 55 linear 5-axis specification nc-trunion table clamping area 400 x 400 mm, 15,7 inch x 15,7 inch tilting range a-axis +10/-110°; c-axis 360° table load max. 200 kg / 440 lbs absolute measuring systems incl. permanent cooling of a- and c-axis motor
spindle speed up to 42,000 rpm hsk-e50 spindle speed 20 up to 42,000 rpm for tool taper hsk-e50 din69893 ac-main drive with 13/10 kw (40%/100%dc) adaption of main drive and tool magazine (differently from standard)
drive power (100% dc) 10 kw
drive power (40% dc) 13 kw
speed range 20 - 42000 rpm
chain-type tool magazine 120 pockets tool magazine 120 pockets chain with double gripper (differently from standard)
application tuning cycle atc-software application tuning cycle atc-software selection of the optimal milling mode for the next machining-step
laser tool measuring renishaw laser tool measuring renishaw for tool length and diameter including calibration tool
3d quick set 3d quickset tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
signal lamp 4-colour signal lamp 4-colour red: general error yellow: intervention necessary green: automatic mode blue: set-up mode
air blast through spindle centre air blast through spindle centre activated by m function and softkey maintained air with a light lubrication
minimum lubrication external external minimum coolant supply with 2 jets, selectable by m-function or soft key
preparation handling system erowa autom.table preparation handling system erowa on automation table with m65 interface only with prior consultation of the technical sales!
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area. release after check list has been filled in.
special equipment - oil/mist separator coolant unit with 600l centrifuge - 3-d data model in step format for customer integration in a cad system for the purpose of machine simulation. (delivery against signed confidentiality agreement)
dmg mori netservice - client dmg netservice - client green light for your machine will be installed on an external pc!
dmg mori messenger - installation kit dmg mori messenger installation kit (connection 1. machine) sie 840d; hdh itnc530; hdh millplus it; hdh tnc620/640; mapps via mtconnect
.gif" alt="Land-

general
hsc-precision centre - active chiller for main spindle and linear drives - active chiller for electrical cabinet - direct absolute measuring system with air purge - coolant-airblast changeover; control: 3d control heidenhain itnc 530 hsci
technical data
feed rate longitudinal/transverse/vertical 1-80000/1-80000/1-80000 mm/min
spindle taper hsk-e 50
rapid traverse longitudinal/transverse/vertical 80/80/80 m/min
working area 1
longitudinal 450 mm
cross 580 mm
vertical 460 mm
tool changer
application vertical
type of magazine chain
type of gripper double gripper
number of tools 120
floor space/weight
dimensions (l x w x h) 5,48 x 4,23 x 2,9 m
weight approx. 9500 kg


hsc55 linear 5-axis specification hsc 55 linear 5-axis specification nc-trunion table clamping area 400 x 400 mm, 15,7 inch x 15,7 inch tilting range a-axis +10/-110°; c-axis 360° table load max. 200 kg / 440 lbs absolute measuring systems incl. permanent cooling of a- and c-axis motor
spindle speed up to 42,000 rpm hsk-e50 spindle speed 20 up to 42,000 rpm for tool taper hsk-e50 din69893 ac-main drive with 13/10 kw (40%/100%dc) adaption of main drive and tool magazine (differently from standard)
drive power (100% dc) 10 kw
drive power (40% dc) 13 kw
speed range 20 - 42000 rpm
chain-type tool magazine 120 pockets tool magazine 120 pockets chain with double gripper (differently from standard)
application tuning cycle atc-software application tuning cycle atc-software selection of the optimal milling mode for the next machining-step
laser tool measuring renishaw laser tool measuring renishaw for tool length and diameter including calibration tool
3d quick set 3d quickset tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
signal lamp 4-colour signal lamp 4-colour red: general error yellow: intervention necessary green: automatic mode blue: set-up mode
air blast through spindle centre air blast through spindle centre activated by m function and softkey maintained air with a light lubrication
minimum lubrication external external minimum coolant supply with 2 jets, selectable by m-function or soft key
preparation handling system erowa autom.table preparation handling system erowa on automation table with m65 interface only with prior consultation of the technical sales!
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area. release after check list has been filled in.
special equipment - oil/mist separator coolant unit with 600l centrifuge - 3-d data model in step format for customer integration in a cad system for the purpose of machine simulation. (delivery against signed confidentiality agreement)
dmg mori netservice - client dmg netservice - client green light for your machine will be installed on an external pc!
dmg mori messenger - installation kit dmg mori messenger installation kit (connection 1. machine) sie 840d; hdh itnc530; hdh millplus it; hdh tnc620/640; mapps via mtconnect
" style="height: 18px;">

GENERAL
HSC-PRECISION CENTRE - ACTIVE CHILLER FOR MAIN SPINDLE AND LINEAR DRIVES - ACTIVE CHILLER FOR ELECTRICAL CABINET - DIRECT ABSOLUTE MEASURING SYSTEM WITH AIR PURGE - COOLANT-AIRBLAST CHANGEOVER; CONTROL: 3D CONTROL HEIDENHAIN ITNC 530 HSCI
TECHNICAL DATA
FEED RATE LONGITUDINAL/TRANSVERSE/VERTICAL 1-80000/1-80000/1-80000 MM/MIN
SPINDLE TAPER HSK-E 50
RAPID TRAVERSE LONGITUDINAL/TRANSVERSE/VERTICAL 80/80/80 M/MIN
WORKING AREA 1
LONGITUDINAL 450 MM
CROSS 580 MM
VERTICAL 460 MM
TOOL CHANGER
APPLICATION VERTICAL
TYPE OF MAGAZINE CHAIN
TYPE OF GRIPPER DOUBLE GRIPPER
NUMBER OF TOOLS 120
FLOOR SPACE/WEIGHT
DIMENSIONS (L X W X H) 5,48 X 4,23 X 2,9 M
WEIGHT APPROX. 9500 KG


HSC55 LINEAR 5-AXIS SPECIFICATION HSC 55 LINEAR 5-AXIS SPECIFICATION NC-TRUNION TABLE CLAMPING AREA 400 X 400 MM, 15,7 INCH X 15,7 INCH TILTING RANGE A-AXIS +10/-110°; C-AXIS 360° TABLE LOAD MAX. 200 KG / 440 LBS ABSOLUTE MEASURING SYSTEMS INCL. PERMANENT COOLING OF A- AND C-AXIS MOTOR
SPINDLE SPEED UP TO 42,000 RPM HSK-E50 SPINDLE SPEED 20 UP TO 42,000 RPM FOR TOOL TAPER HSK-E50 DIN69893 AC-MAIN DRIVE WITH 13/10 KW (40%/100%DC) ADAPTION OF MAIN DRIVE AND TOOL MAGAZINE (DIFFERENTLY FROM STANDARD)
DRIVE POWER (100% DC) 10 KW
DRIVE POWER (40% DC) 13 KW
SPEED RANGE 20 - 42000 RPM
CHAIN-TYPE TOOL MAGAZINE 120 POCKETS TOOL MAGAZINE 120 POCKETS CHAIN WITH DOUBLE GRIPPER (DIFFERENTLY FROM STANDARD)
APPLICATION TUNING CYCLE ATC-SOFTWARE APPLICATION TUNING CYCLE ATC-SOFTWARE SELECTION OF THE OPTIMAL MILLING MODE FOR THE NEXT MACHINING-STEP
LASER TOOL MEASURING RENISHAW LASER TOOL MEASURING RENISHAW FOR TOOL LENGTH AND DIAMETER INCLUDING CALIBRATION TOOL
3D QUICK SET 3D QUICKSET TOOL KIT FOR CONTROL AND COMPENSATION OF THE CINEMATIC ACCURACY OF 5 AXIS MACHINE CONFIGURATIONS (ONLY WITH OPTION TOUCH PROBE)
SIGNAL LAMP 4-COLOUR SIGNAL LAMP 4-COLOUR RED: GENERAL ERROR YELLOW: INTERVENTION NECESSARY GREEN: AUTOMATIC MODE BLUE: SET-UP MODE
AIR BLAST THROUGH SPINDLE CENTRE AIR BLAST THROUGH SPINDLE CENTRE ACTIVATED BY M FUNCTION AND SOFTKEY MAINTAINED AIR WITH A LIGHT LUBRICATION
MINIMUM LUBRICATION EXTERNAL EXTERNAL MINIMUM COOLANT SUPPLY WITH 2 JETS, SELECTABLE BY M-FUNCTION OR SOFT KEY
PREPARATION HANDLING SYSTEM EROWA AUTOM.TABLE PREPARATION HANDLING SYSTEM EROWA ON AUTOMATION TABLE WITH M65 INTERFACE ONLY WITH PRIOR CONSULTATION OF THE TECHNICAL SALES!
OPERATION MODE 4 OPERATION MODE 4 PROCESS MONITORING IN THE PRODUCTION MANUAL INTERVENTION WITH OPEN DOORS OF MACHINING AREA. RELEASE AFTER CHECK LIST HAS BEEN FILLED IN.
SPECIAL EQUIPMENT - OIL/MIST SEPARATOR COOLANT UNIT WITH 600L CENTRIFUGE - 3-D DATA MODEL IN STEP FORMAT FOR CUSTOMER INTEGRATION IN A CAD SYSTEM FOR THE PURPOSE OF MACHINE SIMULATION. (DELIVERY AGAINST SIGNED CONFIDENTIALITY AGREEMENT)
DMG MORI NETSERVICE - CLIENT DMG NETSERVICE - CLIENT GREEN LIGHT FOR YOUR MACHINE WILL BE INSTALLED ON AN EXTERNAL PC!
DMG MORI MESSENGER - INSTALLATION KIT DMG MORI MESSENGER INSTALLATION KIT (CONNECTION 1. MACHINE) SIE 840D; HDH ITNC530; HDH MILLPLUS IT; HDH TNC620/640; MAPPS VIA MTCONNECT
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-union
machine name  horizontal boring machine
manufacturer  union
model  bfp 1602
location  mumbai
year of manufacturing na
technical specification 
spindle 160mm 
x 7000mm 
y 3000mm 
rotary table 3000mm x 2500mm UNION MACHINE NAME HORIZONTAL BORING MACHINE MANUFACTURER UNION MODEL BFP 1602 LOCATION MUMBAI YEAR OF MANUFACTURING NA TECHNICAL SPECIFICATION SPINDLE 160MM X 7000MM Y 3000MM ROTARY TABLE 3000MM X 2500MM
Vendedor: Syndicate Machines Pvt. Ltd.
Año de construcción: usado
Ubicación:
general
hsc-precision centre - active chiller for main spindle and linear drives - active chiller for electrical cabinet - direct absolute measuring system with air purge - coolant-airblast changeover; control: 3d control heidenhain itnc 530
technical data
spindle taper hsk-a 63
feed rate longitudinal/transverse/vertical 1-80000/1-80000/1-80000 mm/min
rapid traverse longitudinal/transverse/vertical 80/80/80 m/min
working area 1
longitudinal 450 mm
cross 580 mm
vertical 460 mm
tool changer
application vertical
type of magazine chain
type of gripper pick up
number of tools 16
floor space/weight
dimensions (l x w x h) 5,48 x 4,23 x 2,9 m
weight approx. 9500 kg


hsc55 linear 5-axis specification hsc 55 linear 5-axis specification nc-trunion table clamping area 400 x 400 mm, 15,7 inch x 15,7 inch tilting range a-axis +10/-110°; c-axis 360° table load max. 200 kg / 440 lbs absolute measuring systems incl. permanent cooling of a- and c-axis motor
spindle speed up to 18,000 rpm hsk-a63 spindle speed 20 up to 18,000 rpm for tool taper hsk-a63 din 69893 ac-main drive with 41/30 kw (40/100%dc) 54,98/40,23 hp
drive power (100% dc) 30 kw
drive power (40% dc) 41 kw
speed range 20 - 18000 rpm
spindle taper hsk-a 63
application tuning cycle atc-software application tuning cycle atc-software selection of the optimal milling mode for the next machining-step
laser tool measuring renishaw laser tool measuring renishaw for tool length and diameter including calibration tool
3d quick set 3d quickset tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
signal lamp 4-colour signal lamp 4-colour red: general error yellow: intervention necessary green: automatic mode blue: set-up mode
production package for high swarf volume w/o ics production package for high swarf volume without ics with paper type filter, 200 l/min , 600 l tank (52 gallons / min, 158 gallon tank) incl. swarf conveyor, scraper type with a wedge wire screen extended swarf flushing, coolant gun (option: safety glass
oil and emulsion mist separator oil- and emulsion mist separator capacity 600m³/h, 0.5kw respective 21,189ft³/h, 0.7hp
air blast through spindle centre air blast through spindle centre activated by m function and softkey maintained air with a light lubrication
minimum lubrication external external minimum coolant supply with 2 jets, selectable by m-function or soft key
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area. release after check list has been filled in.
night-time shutoff after program end automatic shutoff after program end
dmg mori netservice - client dmg netservice - client green light for your machine will be installed on an external pc!
.gif" alt="Land-

general
hsc-precision centre - active chiller for main spindle and linear drives - active chiller for electrical cabinet - direct absolute measuring system with air purge - coolant-airblast changeover; control: 3d control heidenhain itnc 530
technical data
spindle taper hsk-a 63
feed rate longitudinal/transverse/vertical 1-80000/1-80000/1-80000 mm/min
rapid traverse longitudinal/transverse/vertical 80/80/80 m/min
working area 1
longitudinal 450 mm
cross 580 mm
vertical 460 mm
tool changer
application vertical
type of magazine chain
type of gripper pick up
number of tools 16
floor space/weight
dimensions (l x w x h) 5,48 x 4,23 x 2,9 m
weight approx. 9500 kg


hsc55 linear 5-axis specification hsc 55 linear 5-axis specification nc-trunion table clamping area 400 x 400 mm, 15,7 inch x 15,7 inch tilting range a-axis +10/-110°; c-axis 360° table load max. 200 kg / 440 lbs absolute measuring systems incl. permanent cooling of a- and c-axis motor
spindle speed up to 18,000 rpm hsk-a63 spindle speed 20 up to 18,000 rpm for tool taper hsk-a63 din 69893 ac-main drive with 41/30 kw (40/100%dc) 54,98/40,23 hp
drive power (100% dc) 30 kw
drive power (40% dc) 41 kw
speed range 20 - 18000 rpm
spindle taper hsk-a 63
application tuning cycle atc-software application tuning cycle atc-software selection of the optimal milling mode for the next machining-step
laser tool measuring renishaw laser tool measuring renishaw for tool length and diameter including calibration tool
3d quick set 3d quickset tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
signal lamp 4-colour signal lamp 4-colour red: general error yellow: intervention necessary green: automatic mode blue: set-up mode
production package for high swarf volume w/o ics production package for high swarf volume without ics with paper type filter, 200 l/min , 600 l tank (52 gallons / min, 158 gallon tank) incl. swarf conveyor, scraper type with a wedge wire screen extended swarf flushing, coolant gun (option: safety glass
oil and emulsion mist separator oil- and emulsion mist separator capacity 600m³/h, 0.5kw respective 21,189ft³/h, 0.7hp
air blast through spindle centre air blast through spindle centre activated by m function and softkey maintained air with a light lubrication
minimum lubrication external external minimum coolant supply with 2 jets, selectable by m-function or soft key
operation mode 4 operation mode 4 process monitoring in the production manual intervention with open doors of machining area. release after check list has been filled in.
night-time shutoff after program end automatic shutoff after program end
dmg mori netservice - client dmg netservice - client green light for your machine will be installed on an external pc!
" style="height: 18px;">

GENERAL
HSC-PRECISION CENTRE - ACTIVE CHILLER FOR MAIN SPINDLE AND LINEAR DRIVES - ACTIVE CHILLER FOR ELECTRICAL CABINET - DIRECT ABSOLUTE MEASURING SYSTEM WITH AIR PURGE - COOLANT-AIRBLAST CHANGEOVER; CONTROL: 3D CONTROL HEIDENHAIN ITNC 530
TECHNICAL DATA
SPINDLE TAPER HSK-A 63
FEED RATE LONGITUDINAL/TRANSVERSE/VERTICAL 1-80000/1-80000/1-80000 MM/MIN
RAPID TRAVERSE LONGITUDINAL/TRANSVERSE/VERTICAL 80/80/80 M/MIN
WORKING AREA 1
LONGITUDINAL 450 MM
CROSS 580 MM
VERTICAL 460 MM
TOOL CHANGER
APPLICATION VERTICAL
TYPE OF MAGAZINE CHAIN
TYPE OF GRIPPER PICK UP
NUMBER OF TOOLS 16
FLOOR SPACE/WEIGHT
DIMENSIONS (L X W X H) 5,48 X 4,23 X 2,9 M
WEIGHT APPROX. 9500 KG


HSC55 LINEAR 5-AXIS SPECIFICATION HSC 55 LINEAR 5-AXIS SPECIFICATION NC-TRUNION TABLE CLAMPING AREA 400 X 400 MM, 15,7 INCH X 15,7 INCH TILTING RANGE A-AXIS +10/-110°; C-AXIS 360° TABLE LOAD MAX. 200 KG / 440 LBS ABSOLUTE MEASURING SYSTEMS INCL. PERMANENT COOLING OF A- AND C-AXIS MOTOR
SPINDLE SPEED UP TO 18,000 RPM HSK-A63 SPINDLE SPEED 20 UP TO 18,000 RPM FOR TOOL TAPER HSK-A63 DIN 69893 AC-MAIN DRIVE WITH 41/30 KW (40/100%DC) 54,98/40,23 HP
DRIVE POWER (100% DC) 30 KW
DRIVE POWER (40% DC) 41 KW
SPEED RANGE 20 - 18000 RPM
SPINDLE TAPER HSK-A 63
APPLICATION TUNING CYCLE ATC-SOFTWARE APPLICATION TUNING CYCLE ATC-SOFTWARE SELECTION OF THE OPTIMAL MILLING MODE FOR THE NEXT MACHINING-STEP
LASER TOOL MEASURING RENISHAW LASER TOOL MEASURING RENISHAW FOR TOOL LENGTH AND DIAMETER INCLUDING CALIBRATION TOOL
3D QUICK SET 3D QUICKSET TOOL KIT FOR CONTROL AND COMPENSATION OF THE CINEMATIC ACCURACY OF 5 AXIS MACHINE CONFIGURATIONS (ONLY WITH OPTION TOUCH PROBE)
SIGNAL LAMP 4-COLOUR SIGNAL LAMP 4-COLOUR RED: GENERAL ERROR YELLOW: INTERVENTION NECESSARY GREEN: AUTOMATIC MODE BLUE: SET-UP MODE
PRODUCTION PACKAGE FOR HIGH SWARF VOLUME W/O ICS PRODUCTION PACKAGE FOR HIGH SWARF VOLUME WITHOUT ICS WITH PAPER TYPE FILTER, 200 L/MIN , 600 L TANK (52 GALLONS / MIN, 158 GALLON TANK) INCL. SWARF CONVEYOR, SCRAPER TYPE WITH A WEDGE WIRE SCREEN EXTENDED SWARF FLUSHING, COOLANT GUN (OPTION: SAFETY GLASS
OIL AND EMULSION MIST SEPARATOR OIL- AND EMULSION MIST SEPARATOR CAPACITY 600M³/H, 0.5KW RESPECTIVE 21,189FT³/H, 0.7HP
AIR BLAST THROUGH SPINDLE CENTRE AIR BLAST THROUGH SPINDLE CENTRE ACTIVATED BY M FUNCTION AND SOFTKEY MAINTAINED AIR WITH A LIGHT LUBRICATION
MINIMUM LUBRICATION EXTERNAL EXTERNAL MINIMUM COOLANT SUPPLY WITH 2 JETS, SELECTABLE BY M-FUNCTION OR SOFT KEY
OPERATION MODE 4 OPERATION MODE 4 PROCESS MONITORING IN THE PRODUCTION MANUAL INTERVENTION WITH OPEN DOORS OF MACHINING AREA. RELEASE AFTER CHECK LIST HAS BEEN FILLED IN.
NIGHT-TIME SHUTOFF AFTER PROGRAM END AUTOMATIC SHUTOFF AFTER PROGRAM END
DMG MORI NETSERVICE - CLIENT DMG NETSERVICE - CLIENT GREEN LIGHT FOR YOUR MACHINE WILL BE INSTALLED ON AN EXTERNAL PC!
Vendedor: DMG MORI Global Marketing GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 2785mm, y-travel: 2520mm, z-travel: 2455mm, spindle diameter: 130mm, spindle cone: iso 50, table dimensions: 1800x2000mm, max. tabel load: 8t, rotational speed: 5-1000/min, connected load: 100kw, controls: heidenhain tnc 355, length: 9000mm, width: 5800mm, height: 5500mm, weight: 37t, including angle milling head.  X-TRAVEL: 2785MM, Y-TRAVEL: 2520MM, Z-TRAVEL: 2455MM, SPINDLE DIAMETER: 130MM, SPINDLE CONE: ISO 50, TABLE DIMENSIONS: 1800X2000MM, MAX. TABEL LOAD: 8T, ROTATIONAL SPEED: 5-1000/MIN, CONNECTED LOAD: 100KW, CONTROLS: HEIDENHAIN TNC 355, LENGTH: 9000MM, WIDTH: 5800MM, HEIGHT: 5500MM, WEIGHT: 37T, INCLUDING ANGLE MILLING HEAD.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-amtec vertiwrap multi-feed-vffs-system (2 auger-/2 volume-doser) to mix granulate/powder pillow bg<br><br>automatic packing machine: siemens plc controlled, equipped with volumetric cups system. applicable for the granule packing. standard features integrate metering, bag-making, packaging, sealing, printing and counting. standard positioning with servo film transporting system. stable for transporting film with two synchronous belts. high automation with auto correction function. reasonable structure, convenient adjusting operation and maintenance. <br><br>- specifications: max. speed of the machine in neutral: 60 cycles/minute | bag size: l(50-230mm), w(50-150mm) | the max width of packing film: 320 mm | thickness of film: 0.04-0.09mm | bag making mode: pillow bag, gusset bag | range of measuring: 150-500ml | air consumption: 0.8mps 0.25m³/min | power/voltage: 2kw/220v, 50hz | dimension (lxwxh): 1200×905×1300mm | weight: 300kg | body: ss304 | touch screen siemens, plc siemens, control valve siemens, servo motor panasonic, cylinder and pneumatic components smc/festo, solenoid valve smc/festo, triplet union smc, thermostats omron. - volumetric cup device: suitable for automatic measuring of small granule materials and powder materials with good fluidity, such as granulated sugar, seeds, etc. <br><br>- specifications: max. speed of the machine in neutral: 60 cycles/min | weight range: 100g-500g | soft brush with motor: the turntable is equipped with a soft brush to handle the product carefully | auger system: range 1-50ml | accuracy: within +/-0.1g | max. speed of the machine in neutral: 50 cycles/min | power source: 220v, 50hz/110w. - please note: this is only a sample system. please let us know your requirements.<br><br>that machine/system is available in different versions for different bag types, packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP MULTI-FEED-VFFS-SYSTEM (2 AUGER-/2 VOLUME-DOSER) TO MIX GRANULATE/POWDER PILLOW BG

AUTOMATIC PACKING MACHINE: SIEMENS PLC CONTROLLED, EQUIPPED WITH VOLUMETRIC CUPS SYSTEM. APPLICABLE FOR THE GRANULE PACKING. STANDARD FEATURES INTEGRATE METERING, BAG-MAKING, PACKAGING, SEALING, PRINTING AND COUNTING. STANDARD POSITIONING WITH SERVO FILM TRANSPORTING SYSTEM. STABLE FOR TRANSPORTING FILM WITH TWO SYNCHRONOUS BELTS. HIGH AUTOMATION WITH AUTO CORRECTION FUNCTION. REASONABLE STRUCTURE, CONVENIENT ADJUSTING OPERATION AND MAINTENANCE.

- SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 60 CYCLES/MINUTE | BAG SIZE: L(50-230MM), W(50-150MM) | THE MAX WIDTH OF PACKING FILM: 320 MM | THICKNESS OF FILM: 0.04-0.09MM | BAG MAKING MODE: PILLOW BAG, GUSSET BAG | RANGE OF MEASURING: 150-500ML | AIR CONSUMPTION: 0.8MPS 0.25M³/MIN | POWER/VOLTAGE: 2KW/220V, 50HZ | DIMENSION (LXWXH): 1200×905×1300MM | WEIGHT: 300KG | BODY: SS304 | TOUCH SCREEN SIEMENS, PLC SIEMENS, CONTROL VALVE SIEMENS, SERVO MOTOR PANASONIC, CYLINDER AND PNEUMATIC COMPONENTS SMC/FESTO, SOLENOID VALVE SMC/FESTO, TRIPLET UNION SMC, THERMOSTATS OMRON. - VOLUMETRIC CUP DEVICE: SUITABLE FOR AUTOMATIC MEASURING OF SMALL GRANULE MATERIALS AND POWDER MATERIALS WITH GOOD FLUIDITY, SUCH AS GRANULATED SUGAR, SEEDS, ETC.

- SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 60 CYCLES/MIN | WEIGHT RANGE: 100G-500G | SOFT BRUSH WITH MOTOR: THE TURNTABLE IS EQUIPPED WITH A SOFT BRUSH TO HANDLE THE PRODUCT CAREFULLY | AUGER SYSTEM: RANGE 1-50ML | ACCURACY: WITHIN +/-0.1G | MAX. SPEED OF THE MACHINE IN NEUTRAL: 50 CYCLES/MIN | POWER SOURCE: 220V, 50HZ/110W. - PLEASE NOTE: THIS IS ONLY A SAMPLE SYSTEM. PLEASE LET US KNOW YOUR REQUIREMENTS.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT BAG TYPES, PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-control system: cnc heidenhein
spindle diameter: 130 m
x travel: 2600 mm
y travel: 1600 mm
z travel: 1000 mm
w travel: 770
spindle taper: iso 50
table size: 1400 x 1600 mm
table max. load: 8 t

  CONTROL SYSTEM: CNC HEIDENHEIN SPINDLE DIAMETER: 130 M X TRAVEL: 2600 MM Y TRAVEL: 1600 MM Z TRAVEL: 1000 MM W TRAVEL: 770 SPINDLE TAPER: ISO 50 TABLE SIZE: 1400 X 1600 MM TABLE MAX. LOAD: 8 T
Vendedor: Blachmix
Año de construcción: usado
Ubicación: Land-x-travel: 750 mm<br/>y-travel: 600 mm<br/>z-travel: 520 mm<br/>control: heidenhain tnc 430 <br/>tool taper: sk 40 <br/>spindle turning speed - stepless: 15.000 u/min<br/>total power requirement:  kw<br/>weight of the machine ca.: ca 11 t<br/>dimensions of the machine ca.: 5 x 4,5 x 3,1 m<br/>5-axis machining center - equipped with:<br/>- cnc control heidenhain tnc 430 (without handwheel)<br/>- chip conveyor<br/>- 32-fold tool changer (sk 40)<br/>- preparation rotoclear<br/>- main spindle 2017 renewed, rotary union defective, still in production<br/>about 64,000 turn-on and 25,000 spindle hours<br/><br/>machine can be purchased in current condition or with / after one<br/>complete overhaul (spindle, ball screw, guides, tool changers,<br/>hoses, cooling unit - new geometry) before delivery of the machine<br/><br/><br/><br/><br/> X-TRAVEL: 750 MM
Y-TRAVEL: 600 MM
Z-TRAVEL: 520 MM
CONTROL: HEIDENHAIN TNC 430
TOOL TAPER: SK 40
SPINDLE TURNING SPEED - STEPLESS: 15.000 U/MIN
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: CA 11 T
DIMENSIONS OF THE MACHINE CA.: 5 X 4,5 X 3,1 M
5-AXIS MACHINING CENTER - EQUIPPED WITH:
- CNC CONTROL HEIDENHAIN TNC 430 (WITHOUT HANDWHEEL)
- CHIP CONVEYOR
- 32-FOLD TOOL CHANGER (SK 40)
- PREPARATION ROTOCLEAR
- MAIN SPINDLE 2017 RENEWED, ROTARY UNION DEFECTIVE, STILL IN PRODUCTION
ABOUT 64,000 TURN-ON AND 25,000 SPINDLE HOURS

MACHINE CAN BE PURCHASED IN CURRENT CONDITION OR WITH / AFTER ONE
COMPLETE OVERHAUL (SPINDLE, BALL SCREW, GUIDES, TOOL CHANGERS,
HOSES, COOLING UNIT - NEW GEOMETRY) BEFORE DELIVERY OF THE MACHINE




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-capacity, tons: 1600
nominal force exhaust traverse, tons:
1 step pressure: 500 
2 step pressure: 1000 
3 step pressure: 1600 
rated force of clamping traverse, tons:
1 step pressure: 500 
2 step pressure: 1000 
rated force of the cylinder return stroke, tons: 320
the exhaust traverse stroke, mm: 2500
the clamping traverse stroke, mm: 2500
greatest distance between table and exhaust traverse, mm: 3900
moving table size, mm: 3550 x 3550 
moving table stroke, mm: 3550
distance daylight between stroke stopper, mm:
from left to right: 2130
front to back: 3730
cushion capacity, nominal (central ejector), t.: 500
cushion stroke above bed (central ejector), mm.: 900
cushion capacity, nominal (side ejector), t.: 630
cushion stroke above bed (side ejector), mm.: 900
the dimensions of the entire setup, mm:
length: 18750
width: 10560
height: 16400
height over floor level, mm: 10900
press weight, tons: 682

yom: approx.1985    CAPACITY, TONS: 1600 NOMINAL FORCE EXHAUST TRAVERSE, TONS: 1 STEP PRESSURE: 500 2 STEP PRESSURE: 1000 3 STEP PRESSURE: 1600 RATED FORCE OF CLAMPING TRAVERSE, TONS: 1 STEP PRESSURE: 500 2 STEP PRESSURE: 1000 RATED FORCE OF THE CYLINDER RETURN STROKE, TONS: 320 THE EXHAUST TRAVERSE STROKE, MM: 2500 THE CLAMPING TRAVERSE STROKE, MM: 2500 GREATEST DISTANCE BETWEEN TABLE AND EXHAUST TRAVERSE, MM: 3900 MOVING TABLE SIZE, MM: 3550 X 3550 MOVING TABLE STROKE, MM: 3550 DISTANCE DAYLIGHT BETWEEN STROKE STOPPER, MM: FROM LEFT TO RIGHT: 2130 FRONT TO BACK: 3730 CUSHION CAPACITY, NOMINAL (CENTRAL EJECTOR), T.: 500 CUSHION STROKE ABOVE BED (CENTRAL EJECTOR), MM.: 900 CUSHION CAPACITY, NOMINAL (SIDE EJECTOR), T.: 630 CUSHION STROKE ABOVE BED (SIDE EJECTOR), MM.: 900 THE DIMENSIONS OF THE ENTIRE SETUP, MM: LENGTH: 18750 WIDTH: 10560 HEIGHT: 16400 HEIGHT OVER FLOOR LEVEL, MM: 10900 PRESS WEIGHT, TONS: 682 YOM: APPROX.1985
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Ubicación: Land-x-travel:720/800/1370 mm<br/>y-travel:300 mm<br/>z-travel:400 mm<br/>table load:400 kg<br/>:300 x 1270 mm (option: 320x1370) mm<br/>t-slot (width-distance-quantity):3 x 14 x 80 mm<br/>spindle taper:40 iso<br/>turning speed range:vertikale spindel: 45-1660 u/min (11 stufen), horizontale spindel: 35-1500 u/min (12 stufen <br/>distance spindle nose and table:vertikale spindel: 260-660 mm, horizontale spindel: 75-475  mm<br/>feeds:x/y/z: 0-1000 / 0-1000 /0-750 mm/min<br/>rapid travel x/y/z:1000 / 1000 / 750 mm/min<br/>weight of the machine ca.:1,9 t<br/>machine dimensions lxwxh:1720 /1820 (1370 mm tischlänge) x 1680 x 1860 mm<br/>spindle drive:2,9 kw<br/>universal milling head:manuell schwenkbar, 360° <br/>dro: <br/>central lubrication: <br/>halogen lamp: <br/>: <br/>european electric: <br/>: <br/>ce-design: <br/>: <br/>machine vice: <br/>round table, manual : <br/>milling and boring equipment: <br/>cnc controls from:siemens/fanuc/heidenhain <br/>semi guarding: <br/>servo motors: <br/><br/>100 % before loading  warranty: none  one used knee and column milling machine-universal, make union bielefeld, type usf 4, baujahr 1970, maschinen-nr. 55/214 X-TRAVEL:720/800/1370 MM
Y-TRAVEL:300 MM
Z-TRAVEL:400 MM
TABLE LOAD:400 KG
:300 X 1270 MM (OPTION: 320X1370) MM
T-SLOT (WIDTH-DISTANCE-QUANTITY):3 X 14 X 80 MM
SPINDLE TAPER:40 ISO
TURNING SPEED RANGE:VERTIKALE SPINDEL: 45-1660 U/MIN (11 STUFEN), HORIZONTALE SPINDEL: 35-1500 U/MIN (12 STUFEN
DISTANCE SPINDLE NOSE AND TABLE:VERTIKALE SPINDEL: 260-660 MM, HORIZONTALE SPINDEL: 75-475 MM
FEEDS:X/Y/Z: 0-1000 / 0-1000 /0-750 MM/MIN
RAPID TRAVEL X/Y/Z:1000 / 1000 / 750 MM/MIN
WEIGHT OF THE MACHINE CA.:1,9 T
MACHINE DIMENSIONS LXWXH:1720 /1820 (1370 MM TISCHLäNGE) X 1680 X 1860 MM
SPINDLE DRIVE:2,9 KW
UNIVERSAL MILLING HEAD:MANUELL SCHWENKBAR, 360°
DRO:
CENTRAL LUBRICATION:
HALOGEN LAMP:
:
EUROPEAN ELECTRIC:
:
CE-DESIGN:
:
MACHINE VICE:
ROUND TABLE, MANUAL :
MILLING AND BORING EQUIPMENT:
CNC CONTROLS FROM:SIEMENS/FANUC/HEIDENHAIN
SEMI GUARDING:
SERVO MOTORS:

100 % BEFORE LOADING WARRANTY: NONE ONE USED KNEE AND COLUMN MILLING MACHINE-UNIVERSAL, MAKE UNION BIELEFELD, TYPE USF 4, BAUJAHR 1970, MASCHINEN-NR. 55/214
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-workspace in x: 730 mm
workspace in y: 290 mm + milling head adjustment 400 mm
workspace in z: 390 mm
table size: 1000 x 300 mm

tool holder: sk 40
speed range: 28-1400 rpm
total power: 2,2 kw / 380 v
machine weight: 2100 kg

equipment / accessories

3 axis heidenhain digital display
div. dollies + recordings
milling head with drilling tailstock
horizontal milling equipment
coolant system
height adjustable machines fixators
chip protection tray
adjustable hand control panel

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
each party has the opportunity to test the machine in advance in our factory under power.
 WORKSPACE IN X: 730 MM WORKSPACE IN Y: 290 MM + MILLING HEAD ADJUSTMENT 400 MM WORKSPACE IN Z: 390 MM TABLE SIZE: 1000 X 300 MM TOOL HOLDER: SK 40 SPEED RANGE: 28-1400 RPM TOTAL POWER: 2,2 KW / 380 V MACHINE WEIGHT: 2100 KG EQUIPMENT / ACCESSORIES 3 AXIS HEIDENHAIN DIGITAL DISPLAY DIV. DOLLIES + RECORDINGS MILLING HEAD WITH DRILLING TAILSTOCK HORIZONTAL MILLING EQUIPMENT COOLANT SYSTEM HEIGHT ADJUSTABLE MACHINES FIXATORS CHIP PROTECTION TRAY ADJUSTABLE HAND CONTROL PANEL ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EACH PARTY HAS THE OPPORTUNITY TO TEST THE MACHINE IN ADVANCE IN OUR FACTORY UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-x-travel:720/1100/1300 mm<br/>y-travel:320 mm<br/>z-travel:450 mm<br/>table load:500 kg<br/>:360x1325 mm<br/>t-slot (width-distance-quantity):3 x 18 x 80 mm<br/>spindle taper:50 iso<br/>turning speed range:vertikale spindel: 60-1750 u/min (12 stufen), horizontale spindel: 60-1800  u/min (12 stufen <br/>distance spindle nose and table:vertikale spindel: 190 ? 590  mm, horizontale spindel: 20 ? 470  mm<br/>feeds:x/y/z: 30-750 / 20-500 / 15-375 mm/min<br/>rapid travel x/y/z:1000 / 1000 / 750 mm/min<br/>weight of the machine ca.:2,7 t<br/>machine dimensions lxwxh:1820/2520 (1600 tischlänge)x2100x2000  mm<br/>spindle drive:vertikal: 3 kw, horizontal: 5 kw<br/>universal milling head:manuell schwenkbar, 360° <br/>dro: <br/>central lubrication: <br/>halogen lamp: <br/>: <br/>european electric: <br/>: <br/>ce-design: <br/>: <br/>machine vice: <br/>round table, manual : <br/>milling and boring equipment: <br/>cnc controls from:siemens/fanuc/heidenhain <br/>semi guarding: <br/>servo motors: <br/><br/>100 % before loading  warranty: none  one used knee and column milling machine-universal, make union bielefeld, type usf 4, baujahr 1970, maschinen-nr. 55/214 X-TRAVEL:720/1100/1300 MM
Y-TRAVEL:320 MM
Z-TRAVEL:450 MM
TABLE LOAD:500 KG
:360X1325 MM
T-SLOT (WIDTH-DISTANCE-QUANTITY):3 X 18 X 80 MM
SPINDLE TAPER:50 ISO
TURNING SPEED RANGE:VERTIKALE SPINDEL: 60-1750 U/MIN (12 STUFEN), HORIZONTALE SPINDEL: 60-1800 U/MIN (12 STUFEN
DISTANCE SPINDLE NOSE AND TABLE:VERTIKALE SPINDEL: 190 ? 590 MM, HORIZONTALE SPINDEL: 20 ? 470 MM
FEEDS:X/Y/Z: 30-750 / 20-500 / 15-375 MM/MIN
RAPID TRAVEL X/Y/Z:1000 / 1000 / 750 MM/MIN
WEIGHT OF THE MACHINE CA.:2,7 T
MACHINE DIMENSIONS LXWXH:1820/2520 (1600 TISCHLäNGE)X2100X2000 MM
SPINDLE DRIVE:VERTIKAL: 3 KW, HORIZONTAL: 5 KW
UNIVERSAL MILLING HEAD:MANUELL SCHWENKBAR, 360°
DRO:
CENTRAL LUBRICATION:
HALOGEN LAMP:
:
EUROPEAN ELECTRIC:
:
CE-DESIGN:
:
MACHINE VICE:
ROUND TABLE, MANUAL :
MILLING AND BORING EQUIPMENT:
CNC CONTROLS FROM:SIEMENS/FANUC/HEIDENHAIN
SEMI GUARDING:
SERVO MOTORS:

100 % BEFORE LOADING WARRANTY: NONE ONE USED KNEE AND COLUMN MILLING MACHINE-UNIVERSAL, MAKE UNION BIELEFELD, TYPE USF 4, BAUJAHR 1970, MASCHINEN-NR. 55/214
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-connected load: 8.5kw, weight: 12.25t.  CONNECTED LOAD: 8.5KW, WEIGHT: 12.25T.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-x-travel:1000 mm<br/>y-travel:480 mm<br/>z-travel:480 mm<br/>table width:315 mm<br/>table length:1250 mm<br/>table - longitudinal motion:1000 mm<br/>:1250 x 315 mm<br/>turning speed range:28 - 1400 u/min<br/>power capacity:3,7/4,4 kw<br/>total power requirement:6 kw<br/>weight of the machine ca.:2800 kg<br/><br/>100 % before loading  warranty: none  one used knee and column milling machine-universal, make union bielefeld, type usf 4, baujahr 1970, maschinen-nr. 55/214 X-TRAVEL:1000 MM
Y-TRAVEL:480 MM
Z-TRAVEL:480 MM
TABLE WIDTH:315 MM
TABLE LENGTH:1250 MM
TABLE - LONGITUDINAL MOTION:1000 MM
:1250 X 315 MM
TURNING SPEED RANGE:28 - 1400 U/MIN
POWER CAPACITY:3,7/4,4 KW
TOTAL POWER REQUIREMENT:6 KW
WEIGHT OF THE MACHINE CA.:2800 KG

100 % BEFORE LOADING WARRANTY: NONE ONE USED KNEE AND COLUMN MILLING MACHINE-UNIVERSAL, MAKE UNION BIELEFELD, TYPE USF 4, BAUJAHR 1970, MASCHINEN-NR. 55/214
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 1600mm, y-travel: 1600mm, z-travel: 1250mm, b-travel: 360°, working spindle diameter: 90mm, tool cone: sk 40, table dimensions: 1250x1400mm, max. table load: 25,000n, spindle torque: 1600n, feed force: 1600n, connected load: 33kw, machine was completely overhauled before 2009.  X-TRAVEL: 1600MM, Y-TRAVEL: 1600MM, Z-TRAVEL: 1250MM, B-TRAVEL: 360°, WORKING SPINDLE DIAMETER: 90MM, TOOL CONE: SK 40, TABLE DIMENSIONS: 1250X1400MM, MAX. TABLE LOAD: 25,000N, SPINDLE TORQUE: 1600N, FEED FORCE: 1600N, CONNECTED LOAD: 33KW, MACHINE WAS COMPLETELY OVERHAULED BEFORE 2009.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-x-travel:1200 mm<br/>y-travel:700 mm<br/>z-travel:500 mm<br/>:500 x 1600 mm mm<br/>max. table load:1800 kg<br/>t-slot (width-distance-quantity):5 x 18 x 80 mm<br/>spindle taper:50 iso<br/>turning speed range:(27 stufen) 30 - 2050 u/min<br/>distance spindle nose and table:25? 525 mm<br/>feeds:x/y/z: 0-1000 / 0-1000 / 0-500 mm/min<br/>rapid travel x/y/z:2200 / 2200 / 1100 mm/min<br/>power capacity:7,5 kw<br/>weight of the machine ca.:5 t<br/>machine dimensions lxwxh:2475 x 2260 x 2180 mm<br/>universal milling head:manuell schwenkbar, 360° <br/>dro:3-achsen <br/>central lubrication: <br/>halogen lamp: <br/>: <br/>european electric:im wesentlichen schneider <br/>: <br/>ce-design: <br/>: <br/>servo motors:in allen achsen <br/>screws cover: <br/>draw bar: <br/>machine tools: <br/>machine vice: <br/>round table, manual : <br/>milling and boring equipment: <br/><br/>100 % before loading  warranty: none  one used knee and column milling machine-universal, make union bielefeld, type usf 4, baujahr 1970, maschinen-nr. 55/214 X-TRAVEL:1200 MM
Y-TRAVEL:700 MM
Z-TRAVEL:500 MM
:500 X 1600 MM MM
MAX. TABLE LOAD:1800 KG
T-SLOT (WIDTH-DISTANCE-QUANTITY):5 X 18 X 80 MM
SPINDLE TAPER:50 ISO
TURNING SPEED RANGE:(27 STUFEN) 30 - 2050 U/MIN
DISTANCE SPINDLE NOSE AND TABLE:25? 525 MM
FEEDS:X/Y/Z: 0-1000 / 0-1000 / 0-500 MM/MIN
RAPID TRAVEL X/Y/Z:2200 / 2200 / 1100 MM/MIN
POWER CAPACITY:7,5 KW
WEIGHT OF THE MACHINE CA.:5 T
MACHINE DIMENSIONS LXWXH:2475 X 2260 X 2180 MM
UNIVERSAL MILLING HEAD:MANUELL SCHWENKBAR, 360°
DRO:3-ACHSEN
CENTRAL LUBRICATION:
HALOGEN LAMP:
:
EUROPEAN ELECTRIC:IM WESENTLICHEN SCHNEIDER
:
CE-DESIGN:
:
SERVO MOTORS:IN ALLEN ACHSEN
SCREWS COVER:
DRAW BAR:
MACHINE TOOLS:
MACHINE VICE:
ROUND TABLE, MANUAL :
MILLING AND BORING EQUIPMENT:

100 % BEFORE LOADING WARRANTY: NONE ONE USED KNEE AND COLUMN MILLING MACHINE-UNIVERSAL, MAKE UNION BIELEFELD, TYPE USF 4, BAUJAHR 1970, MASCHINEN-NR. 55/214
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-working spindle diameter: 90mm, tool cone: sk 40, table stroke in y-/ z-travel: 800/ 1000mm, vertical headstock travel: 1000x1120mm, rotational speed: 8-1600/min, connected load: 7.5kw, controls: heidenhain tnc 320, was completely overhauled in 2010.  WORKING SPINDLE DIAMETER: 90MM, TOOL CONE: SK 40, TABLE STROKE IN Y-/ Z-TRAVEL: 800/ 1000MM, VERTICAL HEADSTOCK TRAVEL: 1000X1120MM, ROTATIONAL SPEED: 8-1600/MIN, CONNECTED LOAD: 7.5KW, CONTROLS: HEIDENHAIN TNC 320, WAS COMPLETELY OVERHAULED IN 2010.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-x-travel:1500 mm<br/>y-travel:700 mm<br/>z-travel:500 mm<br/>:2000 x 500 mm mm<br/>max. table load:1800 kg<br/>t-slot (width-distance-quantity):5 x 18 x 80 mm<br/>spindle taper:50 iso<br/>turning speed range:(27 stufen) 30 - 2050 u/min<br/>distance spindle nose and table:25? 525 mm<br/>feeds:x/y/z: 0-1000 / 0-1000 / 0-500 mm/min<br/>rapid travel x/y/z:2200 / 2200 / 1100 mm/min<br/>power capacity:7,5 kw<br/>weight of the machine ca.:5 t<br/>machine dimensions lxwxh:2625 x 2260 x 2180 mm<br/>universal milling head:manuell schwenkbar, 360° <br/>dro:3-achsen <br/>central lubrication: <br/>halogen lamp: <br/>: <br/>european electric:im wesentlichen schneider <br/>: <br/>ce-design: <br/>: <br/>servo motors:in allen achsen <br/>screws cover: <br/>draw bar: <br/>machine tools: <br/>machine vice: <br/>round table, manual : <br/>milling and boring equipment: <br/><br/>100 % before loading  warranty: none  one used knee and column milling machine-universal, make union bielefeld, type usf 4, baujahr 1970, maschinen-nr. 55/214 X-TRAVEL:1500 MM
Y-TRAVEL:700 MM
Z-TRAVEL:500 MM
:2000 X 500 MM MM
MAX. TABLE LOAD:1800 KG
T-SLOT (WIDTH-DISTANCE-QUANTITY):5 X 18 X 80 MM
SPINDLE TAPER:50 ISO
TURNING SPEED RANGE:(27 STUFEN) 30 - 2050 U/MIN
DISTANCE SPINDLE NOSE AND TABLE:25? 525 MM
FEEDS:X/Y/Z: 0-1000 / 0-1000 / 0-500 MM/MIN
RAPID TRAVEL X/Y/Z:2200 / 2200 / 1100 MM/MIN
POWER CAPACITY:7,5 KW
WEIGHT OF THE MACHINE CA.:5 T
MACHINE DIMENSIONS LXWXH:2625 X 2260 X 2180 MM
UNIVERSAL MILLING HEAD:MANUELL SCHWENKBAR, 360°
DRO:3-ACHSEN
CENTRAL LUBRICATION:
HALOGEN LAMP:
:
EUROPEAN ELECTRIC:IM WESENTLICHEN SCHNEIDER
:
CE-DESIGN:
:
SERVO MOTORS:IN ALLEN ACHSEN
SCREWS COVER:
DRAW BAR:
MACHINE TOOLS:
MACHINE VICE:
ROUND TABLE, MANUAL :
MILLING AND BORING EQUIPMENT:

100 % BEFORE LOADING WARRANTY: NONE ONE USED KNEE AND COLUMN MILLING MACHINE-UNIVERSAL, MAKE UNION BIELEFELD, TYPE USF 4, BAUJAHR 1970, MASCHINEN-NR. 55/214
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-max. nominal power: 5000kva, max. nominal voltage: 200,000v, max. nominal current: 60a, weight: 19.1t, needs overhauling.  MAX. NOMINAL POWER: 5000KVA, MAX. NOMINAL VOLTAGE: 200,000V, MAX. NOMINAL CURRENT: 60A, WEIGHT: 19.1T, NEEDS OVERHAULING.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 23500 kg<br/>dimensions (l x w x h) approx.: 7300 x 8000 x 4700 mm<br/>description: spindle diameter 110 mm x-travel 2000 mm y-travel 1250 mm z-axis 800 mm w-axis 630 mm table surface area 1250 x 1600 mm rotation movement 360 grad table load 8,0 t turning speeds 5 - 1400 u/min spindle taper iso 50 drive milling spindle 39,0 kw control tnc 530 total power requirement 75 kw weight of the machine ca. 23,5 t dimensions of the machine ca. 7,30 x 8,0 x 4,7 m  facilities:  - heidenhain tnc 530 new 2008  - ballscrews  - coolant system  - hydr. weight-compensation for the headstock  - hardened guides  - autom. clamp a and b axis  - shatter-proof telescope covers x-y and z !!machine come without angle plate!! WEIGHT APPROX.: 23500 KG
DIMENSIONS (L X W X H) APPROX.: 7300 X 8000 X 4700 MM
DESCRIPTION: SPINDLE DIAMETER 110 MM X-TRAVEL 2000 MM Y-TRAVEL 1250 MM Z-AXIS 800 MM W-AXIS 630 MM TABLE SURFACE AREA 1250 X 1600 MM ROTATION MOVEMENT 360 GRAD TABLE LOAD 8,0 T TURNING SPEEDS 5 - 1400 U/MIN SPINDLE TAPER ISO 50 DRIVE MILLING SPINDLE 39,0 KW CONTROL TNC 530 TOTAL POWER REQUIREMENT 75 KW WEIGHT OF THE MACHINE CA. 23,5 T DIMENSIONS OF THE MACHINE CA. 7,30 X 8,0 X 4,7 M FACILITIES: - HEIDENHAIN TNC 530 NEW 2008 - BALLSCREWS - COOLANT SYSTEM - HYDR. WEIGHT-COMPENSATION FOR THE HEADSTOCK - HARDENED GUIDES - AUTOM. CLAMP A AND B AXIS - SHATTER-PROOF TELESCOPE COVERS X-Y AND Z !!MACHINE COME WITHOUT ANGLE PLATE!!
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-type of machine: universal milling machine,.
manufacturer: union (bielefeld).
model: wsf 4-300,.
year built: 1972.
condition: very good,.
type of offer: used machine,
     ,.	
technical data:.
table: 1000 x 300 mm.
paths:.
x = 730 mm,. 
y = 290 mm (plus 400 mm milling head),.
z = 390 mm,.
spindle speed: 28-1400 rpm,.
spindle retainer: sk 40.
drive: 2,2 kw.
comment:.
heidenhain 3-axis digital display.
several accessories.
drilling spindle.
horizontal milling facility.
coolant system.
weight: 2100 kg.
     ,.	
the machine is in a very good shape and ready for operation. it can be visited and demonstrated at our location.,.
    ,.
we will be pleased if you take an interest in our offer.,.
  TYPE OF MACHINE: UNIVERSAL MILLING MACHINE,. MANUFACTURER: UNION (BIELEFELD). MODEL: WSF 4-300,. YEAR BUILT: 1972. CONDITION: VERY GOOD,. TYPE OF OFFER: USED MACHINE, ,. TECHNICAL DATA:. TABLE: 1000 X 300 MM. PATHS:. X = 730 MM,. Y = 290 MM (PLUS 400 MM MILLING HEAD),. Z = 390 MM,. SPINDLE SPEED: 28-1400 RPM,. SPINDLE RETAINER: SK 40. DRIVE: 2,2 KW. COMMENT:. HEIDENHAIN 3-AXIS DIGITAL DISPLAY. SEVERAL ACCESSORIES. DRILLING SPINDLE. HORIZONTAL MILLING FACILITY. COOLANT SYSTEM. WEIGHT: 2100 KG. ,. THE MACHINE IS IN A VERY GOOD SHAPE AND READY FOR OPERATION. IT CAN BE VISITED AND DEMONSTRATED AT OUR LOCATION.,. ,. WE WILL BE PLEASED IF YOU TAKE AN INTEREST IN OUR OFFER.,.
Vendedor: H.-G. Zach Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-spindle diameter: 150 mm<br/>x-travel: 2000 mm<br/>y-travel: 1600 mm<br/>control: siemens 840c <br/>z-travel: 1000 mm<br/>w-axis: 850 mm<br/>table-size: 1600 x 1250 mm<br/>table load: 8 t<br/>total power requirement: 80 kw<br/>weight of the machine ca.: - t<br/>dimensions of the machine ca.: - m<br/><br/><br/><br/><br/> SPINDLE DIAMETER: 150 MM
X-TRAVEL: 2000 MM
Y-TRAVEL: 1600 MM
CONTROL: SIEMENS 840C
Z-TRAVEL: 1000 MM
W-AXIS: 850 MM
TABLE-SIZE: 1600 X 1250 MM
TABLE LOAD: 8 T
TOTAL POWER REQUIREMENT: 80 KW
WEIGHT OF THE MACHINE CA.: - T
DIMENSIONS OF THE MACHINE CA.: - M




Vendedor: ADEM Maschinen GmbH
Año de construcción: usado
Ubicación: Land-3-axis dro optima-electronic ms 3100
spindle diameter 90 mm
tool taper: iso 50 din 2048
spindle speeds range 8-1600 rpm
table dimensions 1000×1120 mm
table rotation 360 °
maximum table load 2500 kg
table cross travel (x) 1000 mm
table longitudinal travel (z) 1600 mm
headstock vertical travel (y) 1000 mm
spindle travel (w) 710 mm
 3-AXIS DRO OPTIMA-ELECTRONIC MS 3100 SPINDLE DIAMETER 90 MM TOOL TAPER: ISO 50 DIN 2048 SPINDLE SPEEDS RANGE 8-1600 RPM TABLE DIMENSIONS 1000×1120 MM TABLE ROTATION 360 ° MAXIMUM TABLE LOAD 2500 KG TABLE CROSS TRAVEL (X) 1000 MM TABLE LONGITUDINAL TRAVEL (Z) 1600 MM HEADSTOCK VERTICAL TRAVEL (Y) 1000 MM SPINDLE TRAVEL (W) 710 MM
Vendedor: MachTechnica Ltd.
Año de construcción: usado
Ubicación: Land-spindle diameter:    125 mm<br/>x travel:   2750 mm<br/>y travel:   2000 mm<br/>--------------------------------------------------:  <br/>working range -cubic-:  <br/>- x-axis travel:   2750 mm<br/>- y-axis travel:   2000 mm<br/>- z-axis travel:   2200 mm<br/>- w-axis travel:   1000 mm<br/>table:  <br/>- table surface (left-right):   1800 mm<br/>- table surface (front-back):   1800 mm<br/>- workpiece load (max):  10000 kg<br/>milling spindle / head:  <br/>- spindle type: horizontal:        <br/>- spindle diameter:    125 mm<br/>- tool fixture: iso sk 50:        <br/>- drive power:     22 kw<br/>last overhaul: 1985<br/><br/><br/><br/><br/> SPINDLE DIAMETER: 125 MM
X TRAVEL: 2750 MM
Y TRAVEL: 2000 MM
--------------------------------------------------:
WORKING RANGE -CUBIC-:
- X-AXIS TRAVEL: 2750 MM
- Y-AXIS TRAVEL: 2000 MM
- Z-AXIS TRAVEL: 2200 MM
- W-AXIS TRAVEL: 1000 MM
TABLE:
- TABLE SURFACE (LEFT-RIGHT): 1800 MM
- TABLE SURFACE (FRONT-BACK): 1800 MM
- WORKPIECE LOAD (MAX): 10000 KG
MILLING SPINDLE / HEAD:
- SPINDLE TYPE: HORIZONTAL:
- SPINDLE DIAMETER: 125 MM
- TOOL FIXTURE: ISO SK 50:
- DRIVE POWER: 22 KW
LAST OVERHAUL: 1985




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Precio: 1.500 €
Ubicación: Land-â?¢ length: 2,00 m
â?¢ width: 0,80 m
â?¢ height: 1.50 m

â?¢ 8 machines:
-manufacturer: dwm copeland
-type: joanna 75-ewl 1 x, 1 x dkmd-75-ewl, 2 x kjp-10 x-ewl, 1 x d2sc1 and 1 x dkjg-100-ewl-65 x ewl, 1 x lsgp40x-ewl dlsgp 1 x-40 x-ewl

â?¢ refrigerant: r404a + r422a
&ACIRC;?&CENT; LENGTH: 2,00 M &ACIRC;?&CENT; WIDTH: 0,80 M &ACIRC;?&CENT; HEIGHT: 1.50 M &ACIRC;?&CENT; 8 MACHINES: -MANUFACTURER: DWM COPELAND -TYPE: JOANNA 75-EWL 1 X, 1 X DKMD-75-EWL, 2 X KJP-10 X-EWL, 1 X D2SC1 AND 1 X DKJG-100-EWL-65 X EWL, 1 X LSGP40X-EWL DLSGP 1 X-40 X-EWL &ACIRC;?&CENT; REFRIGERANT: R404A + R422A
Vendedor: USEDmarket GmbH
Año de construcción: usado
Ubicación: Land-manual for borer union bft 90/5-1<br>(251 pages) MANUAL FOR BORER UNION BFT 90/5-1
(251 PAGES)
Vendedor: Peter Jüttermann Werkzeugmaschinen
Año de construcción: usado
Precio: 1.250 €
Ubicación: Land-small composite system:
â?¢ manufacturer: teko
â?¢ type: tpn3-nj9238gs

â?¢ consists of 3 units:
o manufacturer: embraco espera
o type: nj9238gs

â?¢ length: 1.15 m
â?¢ width: approx. 0.45 m
â?¢ height: 0.70 m
â?¢ refrigerant: r404a
â?¢ year of construction: 2009

condenser:
â?¢ manufacturer: gã¼ntner
â?¢ type: gmm 040.1c/2-nw. e
â?¢ length: 1.20 m
â?¢ width: 0,65 m
â?¢ height: 0,55 m
â?¢ volume: 7.1 ltr.
â?¢ year of construction: 2009
â?¢ with 2 fans SMALL COMPOSITE SYSTEM: &ACIRC;?&CENT; MANUFACTURER: TEKO &ACIRC;?&CENT; TYPE: TPN3-NJ9238GS &ACIRC;?&CENT; CONSISTS OF 3 UNITS: O MANUFACTURER: EMBRACO ESPERA O TYPE: NJ9238GS &ACIRC;?&CENT; LENGTH: 1.15 M &ACIRC;?&CENT; WIDTH: APPROX. 0.45 M &ACIRC;?&CENT; HEIGHT: 0.70 M &ACIRC;?&CENT; REFRIGERANT: R404A &ACIRC;?&CENT; YEAR OF CONSTRUCTION: 2009 CONDENSER: &ACIRC;?&CENT; MANUFACTURER: G&ATILDE;&FRAC14;NTNER &ACIRC;?&CENT; TYPE: GMM 040.1C/2-NW. E &ACIRC;?&CENT; LENGTH: 1.20 M &ACIRC;?&CENT; WIDTH: 0,65 M &ACIRC;?&CENT; HEIGHT: 0,55 M &ACIRC;?&CENT; VOLUME: 7.1 LTR. &ACIRC;?&CENT; YEAR OF CONSTRUCTION: 2009 &ACIRC;?&CENT; WITH 2 FANS
Vendedor: USEDmarket GmbH
Año de construcción: usado
Ubicación: Land-spindle diameter: 110 mm<br/>x-travel: 2000 mm<br/>y-travel: 1600 mm<br/>control: heidenhain tnc 310<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/>the machine is equipped with a new heidenhain continuous-path control tnc 310,<br/>with sps from siemens s 7, with new controlling devices, etc.<br/>the displacement of table is supported by bearing arms on rails.<br/><br/>spindle diameter 110 mm<br/>x-travel 2000 mm <br/>y-travel 1600 mm <br/>z-travel 1600 mm <br/>table surface area 1600 x 1400 mm <br/>table load 6,3 t <br/>spindle taper iso 50  <br/>spindle cone iso 50  <br/>spindle stroke 800 mm <br/>spindle turning speed - stepless 5,6 - 1120 u/min <br/>total power requirement 15 kw <br/>weight of the machine ca. 28000 kg <br/><br/><br/><br/><br/><br/><br/> SPINDLE DIAMETER: 110 MM
X-TRAVEL: 2000 MM
Y-TRAVEL: 1600 MM
CONTROL: HEIDENHAIN TNC 310
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M

THE MACHINE IS EQUIPPED WITH A NEW HEIDENHAIN CONTINUOUS-PATH CONTROL TNC 310,
WITH SPS FROM SIEMENS S 7, WITH NEW CONTROLLING DEVICES, ETC.
THE DISPLACEMENT OF TABLE IS SUPPORTED BY BEARING ARMS ON RAILS.

SPINDLE DIAMETER 110 MM
X-TRAVEL 2000 MM
Y-TRAVEL 1600 MM
Z-TRAVEL 1600 MM
TABLE SURFACE AREA 1600 X 1400 MM
TABLE LOAD 6,3 T
SPINDLE TAPER ISO 50
SPINDLE CONE ISO 50
SPINDLE STROKE 800 MM
SPINDLE TURNING SPEED - STEPLESS 5,6 - 1120 U/MIN
TOTAL POWER REQUIREMENT 15 KW
WEIGHT OF THE MACHINE CA. 28000 KG






Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Precio: 2.000 €
Ubicación: Land-â?¢ length: approx. 1,80 m
â?¢ width: 0,80 m
â?¢ height: 1.70 m
â?¢ refrigerant: r507
â?¢ year of construction: 1997

â?¢ consisting of 6 units:
o manufacturer: bitzer
o type: 1 x 2dl-2.2y, 5 x 2u-3.2y

â?¢ with traces of use, see photos
&ACIRC;?&CENT; LENGTH: APPROX. 1,80 M &ACIRC;?&CENT; WIDTH: 0,80 M &ACIRC;?&CENT; HEIGHT: 1.70 M &ACIRC;?&CENT; REFRIGERANT: R507 &ACIRC;?&CENT; YEAR OF CONSTRUCTION: 1997 &ACIRC;?&CENT; CONSISTING OF 6 UNITS: O MANUFACTURER: BITZER O TYPE: 1 X 2DL-2.2Y, 5 X 2U-3.2Y &ACIRC;?&CENT; WITH TRACES OF USE, SEE PHOTOS
Vendedor: USEDmarket GmbH
Año de construcción: usado
Ubicación: Land-machine measurements: 8.000 mm<br/>machine weight: 9.800 kg<br/>power capacity: 17,5 kw<br/>condition:            used<br/><br/>specification:        batch-off plant ? used<br/><br/>- max. width rubber sheet:        600 mm<br/>- thickness rubber sheet:         4 ? 10 mm<br/>- distance between banging bars:  effective 140 mm<br/>- max. pendant length hanging sheet: 3600 mm<br/>- take-off linear speed:          4 ? 35 m/min. <br/>  frequency control of motor speed<br/>linear speed: <br/>- swinging:                       0 ? 40 m/min.<br/>- hinging:                        0 ? 1,55 m/min.<br/>- no. of cooling fans:            10 set<br/>- power cooling fans:             0,75 kw/set<br/>- total length of line:           8.000 mm<br/>- total power:                    17,5 kw<br/>- final temperature sheet:        room temperature +5°c<br/>- compressed air pressure:        0,4 ? 0,6 mpa<br/>- cross and longitudinal cutter, wig-wag packer for pallets<br/>- total weight:                   ca. 9800 kg<br/><br/>            stuctural features:<br/><br/>1. take-off device is off the ring type conveyor belt with guide strip<br/>   and without any union or joint, and equips with printer. take-off <br/>   conveyor belt, lifting and dip-in wire mesh belt all share one same<br/>   frequency conversion ac speed regulating motor, which the conveying<br/>   speed could be adjustable.<br/><br/>2. lifting bar is driven by one set cycloid pin wheel speed reducer through<br/>   ac frequency conversion and the bar speed is synchronous as the speed of<br/>   lifting device.<br/><br/>3. the sheet is uniformly coated with the lubricator by dipping without<br/>   polluting the environment. its cooling effect is better than the spraying.<br/><br/>4. the hanging up area is fully closed, which adopts the blower to blow<br/>   the sheet at a slant. so it improves the air flowing direction and<br/>   cooling effect.<br/><br/><br/><br/><br/> MACHINE MEASUREMENTS: 8.000 MM
MACHINE WEIGHT: 9.800 KG
POWER CAPACITY: 17,5 KW
CONDITION: USED

SPECIFICATION: BATCH-OFF PLANT ? USED

- MAX. WIDTH RUBBER SHEET: 600 MM
- THICKNESS RUBBER SHEET: 4 ? 10 MM
- DISTANCE BETWEEN BANGING BARS: EFFECTIVE 140 MM
- MAX. PENDANT LENGTH HANGING SHEET: 3600 MM
- TAKE-OFF LINEAR SPEED: 4 ? 35 M/MIN.
FREQUENCY CONTROL OF MOTOR SPEED
LINEAR SPEED:
- SWINGING: 0 ? 40 M/MIN.
- HINGING: 0 ? 1,55 M/MIN.
- NO. OF COOLING FANS: 10 SET
- POWER COOLING FANS: 0,75 KW/SET
- TOTAL LENGTH OF LINE: 8.000 MM
- TOTAL POWER: 17,5 KW
- FINAL TEMPERATURE SHEET: ROOM TEMPERATURE +5°C
- COMPRESSED AIR PRESSURE: 0,4 ? 0,6 MPA
- CROSS AND LONGITUDINAL CUTTER, WIG-WAG PACKER FOR PALLETS
- TOTAL WEIGHT: CA. 9800 KG

STUCTURAL FEATURES:

1. TAKE-OFF DEVICE IS OFF THE RING TYPE CONVEYOR BELT WITH GUIDE STRIP
AND WITHOUT ANY UNION OR JOINT, AND EQUIPS WITH PRINTER. TAKE-OFF
CONVEYOR BELT, LIFTING AND DIP-IN WIRE MESH BELT ALL SHARE ONE SAME
FREQUENCY CONVERSION AC SPEED REGULATING MOTOR, WHICH THE CONVEYING
SPEED COULD BE ADJUSTABLE.

2. LIFTING BAR IS DRIVEN BY ONE SET CYCLOID PIN WHEEL SPEED REDUCER THROUGH
AC FREQUENCY CONVERSION AND THE BAR SPEED IS SYNCHRONOUS AS THE SPEED OF
LIFTING DEVICE.

3. THE SHEET IS UNIFORMLY COATED WITH THE LUBRICATOR BY DIPPING WITHOUT
POLLUTING THE ENVIRONMENT. ITS COOLING EFFECT IS BETTER THAN THE SPRAYING.

4. THE HANGING UP AREA IS FULLY CLOSED, WHICH ADOPTS THE BLOWER TO BLOW
THE SHEET AT A SLANT. SO IT IMPROVES THE AIR FLOWING DIRECTION AND
COOLING EFFECT.




Vendedor: MEB Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-1 gasturbinenkrafwerk
best. from:
-gas turbine fabr.: kraftwerk union aktiengesellschaft, sn: 800037, model no.: v93, built: 1973, performance: 55 mw (56.900 kw), turbo inlet temperature: 820 â° c, speed: 3,000 rpm, air inlet condition: 15 â° c / 1,033 kp / cmâ², hours of operation stand 2000: 9948,. normal startup state 2000: 1988, after 2000 were carried out only test runs
-generator serial: kraftwerk union aktiengesellschaft, sn: 127132, type: tlri 93/36, vde 0530/69, year of construction: 1973, performance: 61.4 mw / 3000 1, only uvw 3,000 rpm, insulation class: b, air cooling. cold air temperature: 40 â° c, 91.300 kva at 20 â° c cold air temperature, weight stand: 110 t, weight runner: 26 t, power: 4400 amp, voltage: 10.7 k.
-combustion chamber fabr.: kraftwerk union aktiengesellschaft, model no.: 800037/b1, model no.: v93, built: 1973, content: 21 m3, maximum pressure: 9.1 atm at 255 â° c,.
maximum temperature: 323 â° c at 6.7 bar, weight: 15 mp
-combustion chamber fabr.: kraftwerk union aktiengesellschaft, model no.: 800037/b2, model no.: v93, built: 1973, content: 21 m3, maximum pressure: 9.1 atm at 255 â° c,.
maximum temperature: 323 â° c at 6.7 bar, weight: 15 mp
note: start of gas turbine power station possible around the world

price on request.  1 GASTURBINENKRAFWERK BEST. FROM: -GAS TURBINE FABR.: KRAFTWERK UNION AKTIENGESELLSCHAFT, SN: 800037, MODEL NO.: V93, BUILT: 1973, PERFORMANCE: 55 MW (56.900 KW), TURBO INLET TEMPERATURE: 820 &ACIRC;&DEG; C, SPEED: 3,000 RPM, AIR INLET CONDITION: 15 &ACIRC;&DEG; C / 1,033 KP / CM&ACIRC;&SUP2;, HOURS OF OPERATION STAND 2000: 9948,. NORMAL STARTUP STATE 2000: 1988, AFTER 2000 WERE CARRIED OUT ONLY TEST RUNS -GENERATOR SERIAL: KRAFTWERK UNION AKTIENGESELLSCHAFT, SN: 127132, TYPE: TLRI 93/36, VDE 0530/69, YEAR OF CONSTRUCTION: 1973, PERFORMANCE: 61.4 MW / 3000 1, ONLY UVW 3,000 RPM, INSULATION CLASS: B, AIR COOLING. COLD AIR TEMPERATURE: 40 &ACIRC;&DEG; C, 91.300 KVA AT 20 &ACIRC;&DEG; C COLD AIR TEMPERATURE, WEIGHT STAND: 110 T, WEIGHT RUNNER: 26 T, POWER: 4400 AMP, VOLTAGE: 10.7 K. -COMBUSTION CHAMBER FABR.: KRAFTWERK UNION AKTIENGESELLSCHAFT, MODEL NO.: 800037/B1, MODEL NO.: V93, BUILT: 1973, CONTENT: 21 M3, MAXIMUM PRESSURE: 9.1 ATM AT 255 &ACIRC;&DEG; C,. MAXIMUM TEMPERATURE: 323 &ACIRC;&DEG; C AT 6.7 BAR, WEIGHT: 15 MP -COMBUSTION CHAMBER FABR.: KRAFTWERK UNION AKTIENGESELLSCHAFT, MODEL NO.: 800037/B2, MODEL NO.: V93, BUILT: 1973, CONTENT: 21 M3, MAXIMUM PRESSURE: 9.1 ATM AT 255 &ACIRC;&DEG; C,. MAXIMUM TEMPERATURE: 323 &ACIRC;&DEG; C AT 6.7 BAR, WEIGHT: 15 MP NOTE: START OF GAS TURBINE POWER STATION POSSIBLE AROUND THE WORLD PRICE ON REQUEST.
Vendedor: Christoph Sattler
Año de construcción: usado
Ubicación: Land-spindle diameter: 110 mm<br/>x-travel: 2500 mm<br/>y-travel: 1250 mm<br/>z-axis: 800 mm<br/>w-axis: 630 mm<br/>b-axis: 1-360 °<br/>table surface area: 2000x1600 mm<br/>rotation movement: 360 grad<br/>table load: 12,5 t<br/>infinately variable: 5-1400 u/min<br/>spindle taper iso: 50 <br/>control: siemens 840 d <br/>total power requirement: 90 kw<br/>weight of the machine ca.: 23,1 t<br/>dimensions of the machine ca.: 8,10 x 6,20 x 5,39 m<br/><br/><br/><br/><br/> SPINDLE DIAMETER: 110 MM
X-TRAVEL: 2500 MM
Y-TRAVEL: 1250 MM
Z-AXIS: 800 MM
W-AXIS: 630 MM
B-AXIS: 1-360 °
TABLE SURFACE AREA: 2000X1600 MM
ROTATION MOVEMENT: 360 GRAD
TABLE LOAD: 12,5 T
INFINATELY VARIABLE: 5-1400 U/MIN
SPINDLE TAPER ISO: 50
CONTROL: SIEMENS 840 D
TOTAL POWER REQUIREMENT: 90 KW
WEIGHT OF THE MACHINE CA.: 23,1 T
DIMENSIONS OF THE MACHINE CA.: 8,10 X 6,20 X 5,39 M




Vendedor: AS Maschinenhandel
Año de construcción: usado
Ubicación: Land-type of machine: 5-axis machining center
manufacturer: hermle
model: c 42 u dynamic
year of constr.: 2015
control: siemens 840 dsl - operate
traverse path x/y/z [mm]: 800/800/550
speed [rpm]: 18,000

spindle:
technology: motor spindle
speed: 18,000 rpm
performance: approx. 20 kw
torque: approx. 180 nm
tool holder: hsk-a63

nc rotary table:
technology a-axis: tandem drive
swivel range: +/-130â°
technology c-axis: torqueantrieb
speed: 65 rpm
clamping surface: 㸠800 mm
table load (max.): 1,400 kg
rotating union: 6-by the middle of the table

general:
tool magazine: 42 stations
rapid traverse in x/y/z axis: 60 m / min
acceleration x/y/z axis: 10 m/sâ²

equipment / accessories:
measuring system: directly (glass scale)
chip disposal: chip conveyor
coolant supply: internal coolant system filter, 40 bar
workpiece inspection: infrared measuring probe renishaw
kinematics measurement: automatic with probe
clamping hydraulics: hydraulic power pack, 180 bar
drehdruchfã¼rung: 6 x through the center of the table
set-up: electronic hand wheel
compensation: electrical thermal compensation
other facilities: chip washing gun
production monitoring: analog but digital TYPE OF MACHINE: 5-AXIS MACHINING CENTER MANUFACTURER: HERMLE MODEL: C 42 U DYNAMIC YEAR OF CONSTR.: 2015 CONTROL: SIEMENS 840 DSL - OPERATE TRAVERSE PATH X/Y/Z [MM]: 800/800/550 SPEED [RPM]: 18,000 SPINDLE: TECHNOLOGY: MOTOR SPINDLE SPEED: 18,000 RPM PERFORMANCE: APPROX. 20 KW TORQUE: APPROX. 180 NM TOOL HOLDER: HSK-A63 NC ROTARY TABLE: TECHNOLOGY A-AXIS: TANDEM DRIVE SWIVEL RANGE: +/-130&ACIRC;&DEG; TECHNOLOGY C-AXIS: TORQUEANTRIEB SPEED: 65 RPM CLAMPING SURFACE: &ATILDE;&CEDIL; 800 MM TABLE LOAD (MAX.): 1,400 KG ROTATING UNION: 6-BY THE MIDDLE OF THE TABLE GENERAL: TOOL MAGAZINE: 42 STATIONS RAPID TRAVERSE IN X/Y/Z AXIS: 60 M / MIN ACCELERATION X/Y/Z AXIS: 10 M/S&ACIRC;&SUP2; EQUIPMENT / ACCESSORIES: MEASURING SYSTEM: DIRECTLY (GLASS SCALE) CHIP DISPOSAL: CHIP CONVEYOR COOLANT SUPPLY: INTERNAL COOLANT SYSTEM FILTER, 40 BAR WORKPIECE INSPECTION: INFRARED MEASURING PROBE RENISHAW KINEMATICS MEASUREMENT: AUTOMATIC WITH PROBE CLAMPING HYDRAULICS: HYDRAULIC POWER PACK, 180 BAR DREHDRUCHF&ATILDE;&FRAC14;RUNG: 6 X THROUGH THE CENTER OF THE TABLE SET-UP: ELECTRONIC HAND WHEEL COMPENSATION: ELECTRICAL THERMAL COMPENSATION OTHER FACILITIES: CHIP WASHING GUN PRODUCTION MONITORING: ANALOG BUT DIGITAL
Vendedor: G+S Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-spindle diameter: 130 mm<br/>x-travel: 2235 mm<br/>y-travel: 2020 mm<br/>z-travel: 2345 mm<br/>w-axis: 900 mm<br/>u-axis: 320 mm<br/>b-axis: 360 °<br/>control: heidenhain tnc 155 4-achs <br/>table-size: 180 x 2000 mm<br/>table load: 8 t<br/>spindle turning speed range: 5-1000 u/min<br/>engine output: 45 kw<br/>total power requirement:  kw<br/>weight of the machine ca.: 34 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> SPINDLE DIAMETER: 130 MM
X-TRAVEL: 2235 MM
Y-TRAVEL: 2020 MM
Z-TRAVEL: 2345 MM
W-AXIS: 900 MM
U-AXIS: 320 MM
B-AXIS: 360 °
CONTROL: HEIDENHAIN TNC 155 4-ACHS
TABLE-SIZE: 180 X 2000 MM
TABLE LOAD: 8 T
SPINDLE TURNING SPEED RANGE: 5-1000 U/MIN
ENGINE OUTPUT: 45 KW
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 34 T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: AS Maschinenhandel
Año de construcción: usado
Ubicación: Land-plattenbohrwerk pr 160 cnc
manufacturer: union
year: 2007, overhaul: 2018

control siemens... sinumerik 840 d
spindeldrehdrurchmesser... 162mm
x axis... 11000mm
y axis... 3000mm
spindle speed... 5-2800.
axis w... 700mm
axis v... 1000mm
cat 50
power of main engine... 60kw

new x-axis in 2018 (beds, linear guides, rulers).
hydrostatic slide
spindle speed 2800 rpm
accessories:
-rectangular sempuco milling head, 1 ° rotation
machine in excellent condition.
options: internal cooling, plattenarrays, turntable.  PLATTENBOHRWERK PR 160 CNC MANUFACTURER: UNION YEAR: 2007, OVERHAUL: 2018 CONTROL SIEMENS... SINUMERIK 840 D SPINDELDREHDRURCHMESSER... 162MM X AXIS... 11000MM Y AXIS... 3000MM SPINDLE SPEED... 5-2800. AXIS W... 700MM AXIS V... 1000MM CAT 50 POWER OF MAIN ENGINE... 60KW NEW X-AXIS IN 2018 (BEDS, LINEAR GUIDES, RULERS). HYDROSTATIC SLIDE SPINDLE SPEED 2800 RPM ACCESSORIES: -RECTANGULAR SEMPUCO MILLING HEAD, 1 ° ROTATION MACHINE IN EXCELLENT CONDITION. OPTIONS: INTERNAL COOLING, PLATTENARRAYS, TURNTABLE.
Vendedor: Herr Radek Procházka
Año de construcción: usado
Ubicación: Land-spindle diameter: 160 mm<br/>x-travel: 5665 mm<br/>y-travel: 2400 mm<br/>z-travel: 1250 mm<br/>v-axis: 500 mm<br/>u-axis: 340 mm<br/>spindle stroke: 1500 mm<br/>spindle taper iso: 50 <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> SPINDLE DIAMETER: 160 MM
X-TRAVEL: 5665 MM
Y-TRAVEL: 2400 MM
Z-TRAVEL: 1250 MM
V-AXIS: 500 MM
U-AXIS: 340 MM
SPINDLE STROKE: 1500 MM
SPINDLE TAPER ISO: 50
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: AS Maschinenhandel
Año de construcción: usado
Ubicación: Land-no. 04045

sale in the sales order from site cnc machining centre for door production reichenbacher iii vision t fischertech

used, year 2011
available from april 2018

the vision is a numerically controlled machining centre for machining wood and plastic parts, as well as parts from composite materials processing. it is designed as routers in a bridges portal design and allows the fully automatic milling, to milling and profile milling.

drilling and insertion station for door hinges
vibration conveyors with supply unit for door hinges
combination sword brush on the outlet side
cnc control siemens sinumerik 840 d solution line, with ncu 720.2
fischertech facilities
kuka robots with linear axis
ausrichte - and turning station for workpieces numerically controlled linear motion in the nc axes:
 
x 1 / x 2-axle movement of the bridge portal on the bed 7,880 mm (longitudinal movement *)

y1 axis movement of the transversal carriage on the portal (working stroke) 2,200 mm (cross movement) * working unit 1

y2-axis movement of the transversal carriage on the portal (working stroke) 2,200 mm (cross movement) * working unit 2

z1 axis movement of the vertical slide in the portal 380 mm vertical movement.
 work unit 1

z2 axis movement of the vertical slide in the portal 380 mm vertical movement.
working unit 2

v1 axis movement of the table bar (machine table, left) 1,150 mm.
(cross movement) *.

v12 axis movement of the table bar (machine table right) 1,150 mm (cross movement) *.

x 3-axis movement of the carriage of the tape cartridge drive 7,880 mm longitudinal movement * l

wwy1-achse movement of the carriage of the double hook (submit) transverse movement *)
wwy2-achse movement of the carriage of the double hook (submit) transverse movement) *.

*) reference: perpendicular to the direction of operating table longitudinal

numerically controlled rotary movements:

b11 - axis 45 â° to the x-y plane +/-180 degrees rotation of the cutting unit 1
b12-axis 45 â° to the x-y plane + /.180 degrees rotation of the milling unit 2
b-axis 00 insertion movement of the band union station
c11-axis in the x-y plane + / _ 360-degree rotation around the axis 21
c12-axis in the x-y plane + / _ 360 degrees rotation to the 22 axis
wwc1 in x-y plane rotation of the double hook 1 (left)
wwc2 in x-y plane rotation of the double gripper 2 (right)
ww-axis in the x-y plane 00 motion of the tool magazine

work units 1 and 2:
rated power: 15,0 kw at 1 24,000 min â·
power s1 constant in the speed range approx. 12,000 min-1... 24,000 min-1
performance under about 9.800 min-1 - proportional to the speed
speed 500... 24,000 min â· of 1, about program preselected
right / left rotation program preselected
the spindle is automatically braked when turned off

drive: rf spindle powered by frequency converter
water cooling with cooling unit, hybrid bearings
air barrier on the work side of the spindle prevents the ingress of dirt particles in the spindle
	
spindle lubrication: grease lubrication, no further lubrication during the lifetime required

clamping system: automatic tensioning system with mechanical tool clamping toughened plate spring package
tool changing due to spring relaxation by means of a pneumatic cylinder
automatic taper cleaning with compressed air

spindle taper: taper hollow hsk 63 according to din 69893 form f, with circumferential groove

tool length: 240 mm, from plan flat tool holder
tool diameter: max 0 200 mm (additional units and saw blades 300 mm)
set tool dimensions: max 6 kg

optional vibration monitoring system (ifm fa.)

tool magazine for 40 seats
tool holder identical on the milling spindle
tool gripper: spring tension clamp gripper
centre distance of tools: 80 mm
flying circle at additional heads of max 250 mm, possibly can be not occupied neighbouring seats
werkzeuglange: max 240 mm, from plan flat tool holder
tool diameter: according to the available space of to 0200 mm
set tool dimensions: max 6 kg for a single tool place, 160 kg for the entire tool magazine

feed drives:
feed speed continuously programmable
v-axis ball screw
with upstream toothed belt drive up to 20 m / min
x 1 / x 2-axle and pinion drive up to 60 m / min
x 3-axis pinion drive-
y-axis rack and pinion drive up to 90 m / min
z axes ball screw drive with upstream toothed belt drive up to 20 m / min
8-axis helical gear units up to 90 â° / sec
811/812-axis helical gear units up to 90 â° / sec
c-axis helical gear units up to 90 â° / sec
ww-axis helical gears-
wwc-axis helical gears-
vvwy-axis helical -.
roller conveyor (outlet side) chain - drive
conveyor belts spur gears-

compressed air central lubrication system

machine table
construction: pin table with adjustable cross back
table layout: 2 clamping stations, for reciprocal loading,.
geometry: free height between grid table and the bottom of the portal about 220 mm when extended vacuum cleaners
workspace: when editing with two aggregates and quick change maximum 2,200 mm x 1 500 mm â· * l
when editing with an aggregate approximately 3,000 mm x 1.500mm * l
for manual loading and editing with an aggregate 4.000 mm x 1 600mm â· i

pneumatically retractable stops in all directions, with sensors
workpiece clamping via 4 x 36 = 144 piece vacuum cleaners
lift of the vacuum cleaner suction diameter of 150 mm, 500 mm

dimensions of the system: 11,00 m length + drilling station (5 m length) depth 12,00 m heavy equipment machinery and equipment without further warranty.
technical data according to the manufacturer, no guarantee!

subject to prior sale, on behalf of the customer

terms of delivery: from location close to 73433 aalen

our general terms and conditions apply, see in the  
 NO. 04045 SALE IN THE SALES ORDER FROM SITE CNC MACHINING CENTRE FOR DOOR PRODUCTION REICHENBACHER III VISION T FISCHERTECH USED, YEAR 2011 AVAILABLE FROM APRIL 2018 THE VISION IS A NUMERICALLY CONTROLLED MACHINING CENTRE FOR MACHINING WOOD AND PLASTIC PARTS, AS WELL AS PARTS FROM COMPOSITE MATERIALS PROCESSING. IT IS DESIGNED AS ROUTERS IN A BRIDGES PORTAL DESIGN AND ALLOWS THE FULLY AUTOMATIC MILLING, TO MILLING AND PROFILE MILLING. DRILLING AND INSERTION STATION FOR DOOR HINGES VIBRATION CONVEYORS WITH SUPPLY UNIT FOR DOOR HINGES COMBINATION SWORD BRUSH ON THE OUTLET SIDE CNC CONTROL SIEMENS SINUMERIK 840 D SOLUTION LINE, WITH NCU 720.2 FISCHERTECH FACILITIES KUKA ROBOTS WITH LINEAR AXIS AUSRICHTE - AND TURNING STATION FOR WORKPIECES NUMERICALLY CONTROLLED LINEAR MOTION IN THE NC AXES: X 1 / X 2-AXLE MOVEMENT OF THE BRIDGE PORTAL ON THE BED 7,880 MM (LONGITUDINAL MOVEMENT *) Y1 AXIS MOVEMENT OF THE TRANSVERSAL CARRIAGE ON THE PORTAL (WORKING STROKE) 2,200 MM (CROSS MOVEMENT) * WORKING UNIT 1 Y2-AXIS MOVEMENT OF THE TRANSVERSAL CARRIAGE ON THE PORTAL (WORKING STROKE) 2,200 MM (CROSS MOVEMENT) * WORKING UNIT 2 Z1 AXIS MOVEMENT OF THE VERTICAL SLIDE IN THE PORTAL 380 MM VERTICAL MOVEMENT. WORK UNIT 1 Z2 AXIS MOVEMENT OF THE VERTICAL SLIDE IN THE PORTAL 380 MM VERTICAL MOVEMENT. WORKING UNIT 2 V1 AXIS MOVEMENT OF THE TABLE BAR (MACHINE TABLE, LEFT) 1,150 MM. (CROSS MOVEMENT) *. V12 AXIS MOVEMENT OF THE TABLE BAR (MACHINE TABLE RIGHT) 1,150 MM (CROSS MOVEMENT) *. X 3-AXIS MOVEMENT OF THE CARRIAGE OF THE TAPE CARTRIDGE DRIVE 7,880 MM LONGITUDINAL MOVEMENT * L WWY1-ACHSE MOVEMENT OF THE CARRIAGE OF THE DOUBLE HOOK (SUBMIT) TRANSVERSE MOVEMENT *) WWY2-ACHSE MOVEMENT OF THE CARRIAGE OF THE DOUBLE HOOK (SUBMIT) TRANSVERSE MOVEMENT) *. *) REFERENCE: PERPENDICULAR TO THE DIRECTION OF OPERATING TABLE LONGITUDINAL NUMERICALLY CONTROLLED ROTARY MOVEMENTS: B11 - AXIS 45 &ACIRC;&DEG; TO THE X-Y PLANE +/-180 DEGREES ROTATION OF THE CUTTING UNIT 1 B12-AXIS 45 &ACIRC;&DEG; TO THE X-Y PLANE + /.180 DEGREES ROTATION OF THE MILLING UNIT 2 B-AXIS 00 INSERTION MOVEMENT OF THE BAND UNION STATION C11-AXIS IN THE X-Y PLANE + / _ 360-DEGREE ROTATION AROUND THE AXIS 21 C12-AXIS IN THE X-Y PLANE + / _ 360 DEGREES ROTATION TO THE 22 AXIS WWC1 IN X-Y PLANE ROTATION OF THE DOUBLE HOOK 1 (LEFT) WWC2 IN X-Y PLANE ROTATION OF THE DOUBLE GRIPPER 2 (RIGHT) WW-AXIS IN THE X-Y PLANE 00 MOTION OF THE TOOL MAGAZINE WORK UNITS 1 AND 2: RATED POWER: 15,0 KW AT 1 24,000 MIN &ACIRC;&MIDDOT; POWER S1 CONSTANT IN THE SPEED RANGE APPROX. 12,000 MIN-1... 24,000 MIN-1 PERFORMANCE UNDER ABOUT 9.800 MIN-1 - PROPORTIONAL TO THE SPEED SPEED 500... 24,000 MIN &ACIRC;&MIDDOT; OF 1, ABOUT PROGRAM PRESELECTED RIGHT / LEFT ROTATION PROGRAM PRESELECTED THE SPINDLE IS AUTOMATICALLY BRAKED WHEN TURNED OFF DRIVE: RF SPINDLE POWERED BY FREQUENCY CONVERTER WATER COOLING WITH COOLING UNIT, HYBRID BEARINGS AIR BARRIER ON THE WORK SIDE OF THE SPINDLE PREVENTS THE INGRESS OF DIRT PARTICLES IN THE SPINDLE SPINDLE LUBRICATION: GREASE LUBRICATION, NO FURTHER LUBRICATION DURING THE LIFETIME REQUIRED CLAMPING SYSTEM: AUTOMATIC TENSIONING SYSTEM WITH MECHANICAL TOOL CLAMPING TOUGHENED PLATE SPRING PACKAGE TOOL CHANGING DUE TO SPRING RELAXATION BY MEANS OF A PNEUMATIC CYLINDER AUTOMATIC TAPER CLEANING WITH COMPRESSED AIR SPINDLE TAPER: TAPER HOLLOW HSK 63 ACCORDING TO DIN 69893 FORM F, WITH CIRCUMFERENTIAL GROOVE TOOL LENGTH: 240 MM, FROM PLAN FLAT TOOL HOLDER TOOL DIAMETER: MAX 0 200 MM (ADDITIONAL UNITS AND SAW BLADES 300 MM) SET TOOL DIMENSIONS: MAX 6 KG OPTIONAL VIBRATION MONITORING SYSTEM (IFM FA.) TOOL MAGAZINE FOR 40 SEATS TOOL HOLDER IDENTICAL ON THE MILLING SPINDLE TOOL GRIPPER: SPRING TENSION CLAMP GRIPPER CENTRE DISTANCE OF TOOLS: 80 MM FLYING CIRCLE AT ADDITIONAL HEADS OF MAX 250 MM, POSSIBLY CAN BE NOT OCCUPIED NEIGHBOURING SEATS WERKZEUGLANGE: MAX 240 MM, FROM PLAN FLAT TOOL HOLDER TOOL DIAMETER: ACCORDING TO THE AVAILABLE SPACE OF TO 0200 MM SET TOOL DIMENSIONS: MAX 6 KG FOR A SINGLE TOOL PLACE, 160 KG FOR THE ENTIRE TOOL MAGAZINE FEED DRIVES: FEED SPEED CONTINUOUSLY PROGRAMMABLE V-AXIS BALL SCREW WITH UPSTREAM TOOTHED BELT DRIVE UP TO 20 M / MIN X 1 / X 2-AXLE AND PINION DRIVE UP TO 60 M / MIN X 3-AXIS PINION DRIVE- Y-AXIS RACK AND PINION DRIVE UP TO 90 M / MIN Z AXES BALL SCREW DRIVE WITH UPSTREAM TOOTHED BELT DRIVE UP TO 20 M / MIN 8-AXIS HELICAL GEAR UNITS UP TO 90 &ACIRC;&DEG; / SEC 811/812-AXIS HELICAL GEAR UNITS UP TO 90 &ACIRC;&DEG; / SEC C-AXIS HELICAL GEAR UNITS UP TO 90 &ACIRC;&DEG; / SEC WW-AXIS HELICAL GEARS- WWC-AXIS HELICAL GEARS- VVWY-AXIS HELICAL -. ROLLER CONVEYOR (OUTLET SIDE) CHAIN - DRIVE CONVEYOR BELTS SPUR GEARS- COMPRESSED AIR CENTRAL LUBRICATION SYSTEM MACHINE TABLE CONSTRUCTION: PIN TABLE WITH ADJUSTABLE CROSS BACK TABLE LAYOUT: 2 CLAMPING STATIONS, FOR RECIPROCAL LOADING,. GEOMETRY: FREE HEIGHT BETWEEN GRID TABLE AND THE BOTTOM OF THE PORTAL ABOUT 220 MM WHEN EXTENDED VACUUM CLEANERS WORKSPACE: WHEN EDITING WITH TWO AGGREGATES AND QUICK CHANGE MAXIMUM 2,200 MM X 1 500 MM &ACIRC;&MIDDOT; * L WHEN EDITING WITH AN AGGREGATE APPROXIMATELY 3,000 MM X 1.500MM * L FOR MANUAL LOADING AND EDITING WITH AN AGGREGATE 4.000 MM X 1 600MM &ACIRC;&MIDDOT; I PNEUMATICALLY RETRACTABLE STOPS IN ALL DIRECTIONS, WITH SENSORS WORKPIECE CLAMPING VIA 4 X 36 = 144 PIECE VACUUM CLEANERS LIFT OF THE VACUUM CLEANER SUCTION DIAMETER OF 150 MM, 500 MM DIMENSIONS OF THE SYSTEM: 11,00 M LENGTH + DRILLING STATION (5 M LENGTH) DEPTH 12,00 M HEAVY EQUIPMENT MACHINERY AND EQUIPMENT WITHOUT FURTHER WARRANTY. TECHNICAL DATA ACCORDING TO THE MANUFACTURER, NO GUARANTEE! SUBJECT TO PRIOR SALE, ON BEHALF OF THE CUSTOMER TERMS OF DELIVERY: FROM LOCATION CLOSE TO 73433 AALEN OUR GENERAL TERMS AND CONDITIONS APPLY, SEE IN THE
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-table surface area: 2500 x 2000 mm<br/>table load: ca. 18 t<br/>total wight: 11,8 t<br/>table length:  mm<br/>table width:  mm<br/>table load:  t<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> TABLE SURFACE AREA: 2500 X 2000 MM
TABLE LOAD: CA. 18 T
TOTAL WIGHT: 11,8 T
TABLE LENGTH: MM
TABLE WIDTH: MM
TABLE LOAD: T
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: AS Maschinenhandel
Año de construcción: usado
Ubicación: Land-nominal power: 1250va, max. nominal voltage: 21.000v, nominal current: 36.1a, weight: 3.76t.  NOMINAL POWER: 1250VA, MAX. NOMINAL VOLTAGE: 21.000V, NOMINAL CURRENT: 36.1A, WEIGHT: 3.76T.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-spindle diameter: 130 mm<br/>cross slide - travel: 1600 mm<br/>vertical adjustment of drilling slide: 1600 mm<br/>drilling depth in one stroke: 1000 mm<br/>spindle taper: iso 50 <br/>spindle turning speed range: 7 - 900 u/min<br/>table surface area: 1600 x 1400 mm<br/>table travel longitudinal: 2500 mm<br/>table rotating: 360 °<br/>voltage: 380 v<br/>spindle drive: 18,5 kw<br/>rapid traverse: 2 m/min<br/>feed: 0,63 - 2000 mm/min<br/>table load: 8 t<br/>faceplate turning speed range: 4,5 - 180 u/min<br/>radial slide travel: 320 mm<br/>max.drill diameter: 800 mm<br/>digital readout: 4 achsen <br/>total power requirement: 35 kw<br/>weight of the machine ca.: 32 t<br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> SPINDLE DIAMETER: 130 MM
CROSS SLIDE - TRAVEL: 1600 MM
VERTICAL ADJUSTMENT OF DRILLING SLIDE: 1600 MM
DRILLING DEPTH IN ONE STROKE: 1000 MM
SPINDLE TAPER: ISO 50
SPINDLE TURNING SPEED RANGE: 7 - 900 U/MIN
TABLE SURFACE AREA: 1600 X 1400 MM
TABLE TRAVEL LONGITUDINAL: 2500 MM
TABLE ROTATING: 360 °
VOLTAGE: 380 V
SPINDLE DRIVE: 18,5 KW
RAPID TRAVERSE: 2 M/MIN
FEED: 0,63 - 2000 MM/MIN
TABLE LOAD: 8 T
FACEPLATE TURNING SPEED RANGE: 4,5 - 180 U/MIN
RADIAL SLIDE TRAVEL: 320 MM
MAX.DRILL DIAMETER: 800 MM
DIGITAL READOUT: 4 ACHSEN
TOTAL POWER REQUIREMENT: 35 KW
WEIGHT OF THE MACHINE CA.: 32 T



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-co2 recovery plant union engineering rbu 500 kg/h
 
the recovery plant is specially designed to recover co2 from fermentation processes at breweries. this complete co2 plant was delivered by union engineering in 2005 and it has nominal co2 removal capacity of 500 kg/h. co2 compressor is two stage mehrer piston compressor and refrigeration compressor is sobroe operating with ammonia (r717). the plant has siemens s7-300 plc control system where operation is carried our via a 12” screen panel with windows ce operating system. the delivery includes following main components: 
 
•	foam trap, material aisi 304
•	water scrubber for co 2 gas flushing mainly from alcohol, capacity 1200 kg/h co2, material aisi 304 (common with another 500 kg co2 recovery system)
•	inflammable co2 gas storage, 50 m3 open type, material reinforced pvc (common with another 500 kg co2 recovery system) 
•	co2 compressor, type josef mehrer tzw 70, capacity 550 kg/h co2, with 55 kw/620 rpm electric motors. radiator cooler for cooling waters. 
•	activated carbon filter for removing odors, consisting of 2 identical 260 liter / 20 bar vessels filled with active carbon, material aisi 304, equipped with a blower and air heating element.
•	dehydrator for drying of gas to a dew point, consisting of 2 identical 139 liter / 20 bar vessels filled with a desiccant.
•	cooling compressor piston type sabroe operating with r717 refrigerant with evaporative refrigerant condenser
•	co2 liquefier consisting of shell-and-tube type co2 condenser and nh3 evaporator. separation of non-condensable inert gases in made with a purge system
•	steam heated evaporator for liquid co2, capacity 2200 kg/h co2 (common with another 500 kg co2 recovery system) 
•	gas analyzers 
operation description of this co2 recover plant 
gaseous carbon dioxide (co2) is fed from the fermentation tank through the foam separator where fermentation foam is removed and gas is pumped to the intermediate 50 m3 co2 buffer storage balloon. from this intermediate storage gas is fed into the scrubber where the co2 is cleaned. scrubber is designed to clean the co2 from ethanol and other impurities with a counter current clean water flow.
  
purified gas is fed into intercooled piston type co2 compressor where it is compressed in two stages into 18.5 bar. compressed gas (co2) passes through double acting, electric heated active coal cleaning filters and after that through double acting desiccant dyers. these filters are clearing and draining of co2, which is then fed to the liquefaction plant. liquefaction plant consist a condenser, evaporator and chiller running on r717 refrigerant. refrigerant is compressed with a piston cooling compressor and it evaporates in the condenser and cools co2 at - 30 0 c, allowing the condensation of co2 at a pressure of 17.4 bar. non-condensable gases will be extracted from liquid co2 in this stage. clean, liquefied carbon dioxide is pumped into the storage tank (not a part of this plant) and where it is fed into the evaporator for usage in the plant. in the evaporator, the liquid co2 is heated steam and it is vaporized and converted into the gaseous co2. at a pressure of 17.5 bar and pressure is further reduced to suitable for plant system.


 CO2 RECOVERY PLANT UNION ENGINEERING RBU 500 KG/H THE RECOVERY PLANT IS SPECIALLY DESIGNED TO RECOVER CO2 FROM FERMENTATION PROCESSES AT BREWERIES. THIS COMPLETE CO2 PLANT WAS DELIVERED BY UNION ENGINEERING IN 2005 AND IT HAS NOMINAL CO2 REMOVAL CAPACITY OF 500 KG/H. CO2 COMPRESSOR IS TWO STAGE MEHRER PISTON COMPRESSOR AND REFRIGERATION COMPRESSOR IS SOBROE OPERATING WITH AMMONIA (R717). THE PLANT HAS SIEMENS S7-300 PLC CONTROL SYSTEM WHERE OPERATION IS CARRIED OUR VIA A 12” SCREEN PANEL WITH WINDOWS CE OPERATING SYSTEM. THE DELIVERY INCLUDES FOLLOWING MAIN COMPONENTS: • FOAM TRAP, MATERIAL AISI 304 • WATER SCRUBBER FOR CO 2 GAS FLUSHING MAINLY FROM ALCOHOL, CAPACITY 1200 KG/H CO2, MATERIAL AISI 304 (COMMON WITH ANOTHER 500 KG CO2 RECOVERY SYSTEM) • INFLAMMABLE CO2 GAS STORAGE, 50 M3 OPEN TYPE, MATERIAL REINFORCED PVC (COMMON WITH ANOTHER 500 KG CO2 RECOVERY SYSTEM) • CO2 COMPRESSOR, TYPE JOSEF MEHRER TZW 70, CAPACITY 550 KG/H CO2, WITH 55 KW/620 RPM ELECTRIC MOTORS. RADIATOR COOLER FOR COOLING WATERS. • ACTIVATED CARBON FILTER FOR REMOVING ODORS, CONSISTING OF 2 IDENTICAL 260 LITER / 20 BAR VESSELS FILLED WITH ACTIVE CARBON, MATERIAL AISI 304, EQUIPPED WITH A BLOWER AND AIR HEATING ELEMENT. • DEHYDRATOR FOR DRYING OF GAS TO A DEW POINT, CONSISTING OF 2 IDENTICAL 139 LITER / 20 BAR VESSELS FILLED WITH A DESICCANT. • COOLING COMPRESSOR PISTON TYPE SABROE OPERATING WITH R717 REFRIGERANT WITH EVAPORATIVE REFRIGERANT CONDENSER • CO2 LIQUEFIER CONSISTING OF SHELL-AND-TUBE TYPE CO2 CONDENSER AND NH3 EVAPORATOR. SEPARATION OF NON-CONDENSABLE INERT GASES IN MADE WITH A PURGE SYSTEM • STEAM HEATED EVAPORATOR FOR LIQUID CO2, CAPACITY 2200 KG/H CO2 (COMMON WITH ANOTHER 500 KG CO2 RECOVERY SYSTEM) • GAS ANALYZERS OPERATION DESCRIPTION OF THIS CO2 RECOVER PLANT GASEOUS CARBON DIOXIDE (CO2) IS FED FROM THE FERMENTATION TANK THROUGH THE FOAM SEPARATOR WHERE FERMENTATION FOAM IS REMOVED AND GAS IS PUMPED TO THE INTERMEDIATE 50 M3 CO2 BUFFER STORAGE BALLOON. FROM THIS INTERMEDIATE STORAGE GAS IS FED INTO THE SCRUBBER WHERE THE CO2 IS CLEANED. SCRUBBER IS DESIGNED TO CLEAN THE CO2 FROM ETHANOL AND OTHER IMPURITIES WITH A COUNTER CURRENT CLEAN WATER FLOW. PURIFIED GAS IS FED INTO INTERCOOLED PISTON TYPE CO2 COMPRESSOR WHERE IT IS COMPRESSED IN TWO STAGES INTO 18.5 BAR. COMPRESSED GAS (CO2) PASSES THROUGH DOUBLE ACTING, ELECTRIC HEATED ACTIVE COAL CLEANING FILTERS AND AFTER THAT THROUGH DOUBLE ACTING DESICCANT DYERS. THESE FILTERS ARE CLEARING AND DRAINING OF CO2, WHICH IS THEN FED TO THE LIQUEFACTION PLANT. LIQUEFACTION PLANT CONSIST A CONDENSER, EVAPORATOR AND CHILLER RUNNING ON R717 REFRIGERANT. REFRIGERANT IS COMPRESSED WITH A PISTON COOLING COMPRESSOR AND IT EVAPORATES IN THE CONDENSER AND COOLS CO2 AT - 30 0 C, ALLOWING THE CONDENSATION OF CO2 AT A PRESSURE OF 17.4 BAR. NON-CONDENSABLE GASES WILL BE EXTRACTED FROM LIQUID CO2 IN THIS STAGE. CLEAN, LIQUEFIED CARBON DIOXIDE IS PUMPED INTO THE STORAGE TANK (NOT A PART OF THIS PLANT) AND WHERE IT IS FED INTO THE EVAPORATOR FOR USAGE IN THE PLANT. IN THE EVAPORATOR, THE LIQUID CO2 IS HEATED STEAM AND IT IS VAPORIZED AND CONVERTED INTO THE GASEOUS CO2. AT A PRESSURE OF 17.5 BAR AND PRESSURE IS FURTHER REDUCED TO SUITABLE FOR PLANT SYSTEM.
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-table dimensions: 315x1250 mm<br/>motor output: unbkt kw<br/>spindle diameter: unbkt. mm<br/>reus: unbkt. u/min<br/>weight:  kg<br/>year:  <br/><br/><br/><br/><br/> TABLE DIMENSIONS: 315X1250 MM
MOTOR OUTPUT: UNBKT KW
SPINDLE DIAMETER: UNBKT. MM
REUS: UNBKT. U/MIN
WEIGHT: KG
YEAR:




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-co2 recovery plant union engineering 500 kg/h
  
the recovery plant is specially designed to recover co2 from fermentation processes at breweries. this complete co2 plant was delivered by union engineering in 1999 and it has nominal co2 removal capacity of 500 kg/h. co2 compressor is two stage mehrer piston compressor and refrigeration compressor is sobroe operating with ammonia (r717). the plant operation is controlled with siemens s7-300 plc. the delivery includes following main components: 
 
•	foam trap, material aisi 304
•	water scrubber for co 2 gas flushing mainly from alcohol, capacity 1200 kg/h co2, material aisi 304 (common with another 500 kg co2 recovery system)
•	inflammable co2 gas storage, 50 m3 open type, material reinforced pvc (common with another 500 kg co2 recovery system) 
•	co2 compressor, type josef mehrer tzw 70, capacity 550 kg/h co2, with 55 kw/620 rpm electric motors. radiator cooler for cooling waters. 
•	activated carbon filter for removing odors, consisting of 2 identical 260 liter / 20 bar vessels filled with active carbon, material aisi 304, equipped with a blower and air heating element.
•	dehydrator for drying of gas to a dew point, consisting of 2 identical 139 liter / 20 bar vessels filled with a desiccant.
•	cooling compressor piston type sabroe operating with r717 refrigerant with evaporative refrigerant condenser
•	co2 liquefier consisting of shell-and-tube type co2 condenser and nh3 evaporator. separation of non-condensable inert gases in made with a purge system
•	steam heated evaporator for liquid co2, capacity 2200 kg/h co2 (common with another 500 kg co2 recovery system) 
•	gas analyzers 
operation description of this co2 recover plant 
gaseous carbon dioxide (co2) is fed from the fermentation tank through the foam separator where fermentation foam is removed and gas is pumped to the intermediate 50 m3 co2 buffer storage balloon. from this intermediate storage gas is fed into the scrubber where the co2 is cleaned. scrubber is designed to clean the co2 from ethanol and other impurities with a counter current clean water flow.
 
purified gas is fed into intercooled piston type co2 compressor where it is compressed in two stages into 18.5 bar. compressed gas (co2) passes through double acting, electric heated active coal cleaning filters and after that through double acting desiccant dyers. these filters are clearing and draining of co2, which is then fed to the liquefaction plant. liquefaction plant consist a condenser, evaporator and chiller running on r717 refrigerant. refrigerant is compressed with a piston cooling compressor and it evaporates in the condenser and cools co2 at - 30 0 c, allowing the condensation of co2 at a pressure of 17.4 bar. non-condensable gases will be extracted from liquid co2 in this stage. clean, liquefied carbon dioxide is pumped into the storage tank (not a part of this plant) and where it is fed into the evaporator for usage in the plant. in the evaporator, the liquid co2 is heated steam and it is vaporized and converted into the gaseous co2. at a pressure of 17.5 bar and pressure is further reduced to suitable for plant system.
 CO2 RECOVERY PLANT UNION ENGINEERING 500 KG/H THE RECOVERY PLANT IS SPECIALLY DESIGNED TO RECOVER CO2 FROM FERMENTATION PROCESSES AT BREWERIES. THIS COMPLETE CO2 PLANT WAS DELIVERED BY UNION ENGINEERING IN 1999 AND IT HAS NOMINAL CO2 REMOVAL CAPACITY OF 500 KG/H. CO2 COMPRESSOR IS TWO STAGE MEHRER PISTON COMPRESSOR AND REFRIGERATION COMPRESSOR IS SOBROE OPERATING WITH AMMONIA (R717). THE PLANT OPERATION IS CONTROLLED WITH SIEMENS S7-300 PLC. THE DELIVERY INCLUDES FOLLOWING MAIN COMPONENTS: • FOAM TRAP, MATERIAL AISI 304 • WATER SCRUBBER FOR CO 2 GAS FLUSHING MAINLY FROM ALCOHOL, CAPACITY 1200 KG/H CO2, MATERIAL AISI 304 (COMMON WITH ANOTHER 500 KG CO2 RECOVERY SYSTEM) • INFLAMMABLE CO2 GAS STORAGE, 50 M3 OPEN TYPE, MATERIAL REINFORCED PVC (COMMON WITH ANOTHER 500 KG CO2 RECOVERY SYSTEM) • CO2 COMPRESSOR, TYPE JOSEF MEHRER TZW 70, CAPACITY 550 KG/H CO2, WITH 55 KW/620 RPM ELECTRIC MOTORS. RADIATOR COOLER FOR COOLING WATERS. • ACTIVATED CARBON FILTER FOR REMOVING ODORS, CONSISTING OF 2 IDENTICAL 260 LITER / 20 BAR VESSELS FILLED WITH ACTIVE CARBON, MATERIAL AISI 304, EQUIPPED WITH A BLOWER AND AIR HEATING ELEMENT. • DEHYDRATOR FOR DRYING OF GAS TO A DEW POINT, CONSISTING OF 2 IDENTICAL 139 LITER / 20 BAR VESSELS FILLED WITH A DESICCANT. • COOLING COMPRESSOR PISTON TYPE SABROE OPERATING WITH R717 REFRIGERANT WITH EVAPORATIVE REFRIGERANT CONDENSER • CO2 LIQUEFIER CONSISTING OF SHELL-AND-TUBE TYPE CO2 CONDENSER AND NH3 EVAPORATOR. SEPARATION OF NON-CONDENSABLE INERT GASES IN MADE WITH A PURGE SYSTEM • STEAM HEATED EVAPORATOR FOR LIQUID CO2, CAPACITY 2200 KG/H CO2 (COMMON WITH ANOTHER 500 KG CO2 RECOVERY SYSTEM) • GAS ANALYZERS OPERATION DESCRIPTION OF THIS CO2 RECOVER PLANT GASEOUS CARBON DIOXIDE (CO2) IS FED FROM THE FERMENTATION TANK THROUGH THE FOAM SEPARATOR WHERE FERMENTATION FOAM IS REMOVED AND GAS IS PUMPED TO THE INTERMEDIATE 50 M3 CO2 BUFFER STORAGE BALLOON. FROM THIS INTERMEDIATE STORAGE GAS IS FED INTO THE SCRUBBER WHERE THE CO2 IS CLEANED. SCRUBBER IS DESIGNED TO CLEAN THE CO2 FROM ETHANOL AND OTHER IMPURITIES WITH A COUNTER CURRENT CLEAN WATER FLOW. PURIFIED GAS IS FED INTO INTERCOOLED PISTON TYPE CO2 COMPRESSOR WHERE IT IS COMPRESSED IN TWO STAGES INTO 18.5 BAR. COMPRESSED GAS (CO2) PASSES THROUGH DOUBLE ACTING, ELECTRIC HEATED ACTIVE COAL CLEANING FILTERS AND AFTER THAT THROUGH DOUBLE ACTING DESICCANT DYERS. THESE FILTERS ARE CLEARING AND DRAINING OF CO2, WHICH IS THEN FED TO THE LIQUEFACTION PLANT. LIQUEFACTION PLANT CONSIST A CONDENSER, EVAPORATOR AND CHILLER RUNNING ON R717 REFRIGERANT. REFRIGERANT IS COMPRESSED WITH A PISTON COOLING COMPRESSOR AND IT EVAPORATES IN THE CONDENSER AND COOLS CO2 AT - 30 0 C, ALLOWING THE CONDENSATION OF CO2 AT A PRESSURE OF 17.4 BAR. NON-CONDENSABLE GASES WILL BE EXTRACTED FROM LIQUID CO2 IN THIS STAGE. CLEAN, LIQUEFIED CARBON DIOXIDE IS PUMPED INTO THE STORAGE TANK (NOT A PART OF THIS PLANT) AND WHERE IT IS FED INTO THE EVAPORATOR FOR USAGE IN THE PLANT. IN THE EVAPORATOR, THE LIQUID CO2 IS HEATED STEAM AND IT IS VAPORIZED AND CONVERTED INTO THE GASEOUS CO2. AT A PRESSURE OF 17.5 BAR AND PRESSURE IS FURTHER REDUCED TO SUITABLE FOR PLANT SYSTEM.
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 950 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-machine type super finishing machine
make naxos union
type wt 140/3500
built in 1975
max.schleifdiameter 1400
max grinding length 3500 MACHINE TYPE SUPER FINISHING MACHINE MAKE NAXOS UNION TYPE WT 140/3500 BUILT IN 1975 MAX.SCHLEIFDIAMETER 1400 MAX GRINDING LENGTH 3500
Vendedor: INTERMACH BV
Año de construcción: usado
Precio: 15 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-make naxos union
cnc type rty63/2000
built in 1992
control type siemens sinumerik 3
max.grindingdiameter 600 mm
max grinding length 2700 mm
max grinding width 100 mm
gesamtleistung(kw) 42  MAKE NAXOS UNION CNC TYPE RTY63/2000 BUILT IN 1992 CONTROL TYPE SIEMENS SINUMERIK 3 MAX.GRINDINGDIAMETER 600 MM MAX GRINDING LENGTH 2700 MM MAX GRINDING WIDTH 100 MM GESAMTLEISTUNG(KW) 42
Vendedor: INTERMACH BV
Año de construcción: usado
Precio: 80 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 17.900 €
Ubicación: Land-horizontal drilling and milling machine
toolholder sk 40
spindle diameter 90 mm
table size                     1000 x 1120 mm
travel vertical (y) 1000 mm
travel table (z) 1600 mm
travel table (x) 1000 mm
bore spindle (w) 710 mm 
planschieberverstellung (u) 160 mm
table rotation (b)               360°
spindle speed                 8-1600 u/min
boring motor                  11 kw
connected power           23 kw
weight approx.                             8.7 t

dro ae 80 (3 axes)
rotary table
face chuck
ball screws  HORIZONTAL DRILLING AND MILLING MACHINE TOOLHOLDER SK 40 SPINDLE DIAMETER 90 MM TABLE SIZE 1000 X 1120 MM TRAVEL VERTICAL (Y) 1000 MM TRAVEL TABLE (Z) 1600 MM TRAVEL TABLE (X) 1000 MM BORE SPINDLE (W) 710 MM PLANSCHIEBERVERSTELLUNG (U) 160 MM TABLE ROTATION (B) 360° SPINDLE SPEED 8-1600 U/MIN BORING MOTOR 11 KW CONNECTED POWER 23 KW WEIGHT APPROX. 8.7 T DRO AE 80 (3 AXES) ROTARY TABLE FACE CHUCK BALL SCREWS
Vendedor: Norbert Gottwald Werkzeugmaschinen
Año de construcción: usado
Precio: 40 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)