15 ofertas

Año de construcción: usado
Ubicación: Land-cnc railway control 3 axles, siemens 810
42 x tool changer
procedures; x = 1800, y = 560, z = quill stroke: 300 mm.
spindle speed: 30-4000 rpm.
tool holder: sk 40.
router table surface: 2 piece 900 x 550 mm.
incl. coolant system with internal coolant, electr. remote control,
full cabin and full documentation.
shuttle machining possible.
weight: approx. 9000 kg.
good working condition.
the machine can be seen under power and is immediately available.  CNC RAILWAY CONTROL 3 AXLES, SIEMENS 810 42 X TOOL CHANGER PROCEDURES; X = 1800, Y = 560, Z = QUILL STROKE: 300 MM. SPINDLE SPEED: 30-4000 RPM. TOOL HOLDER: SK 40. ROUTER TABLE SURFACE: 2 PIECE 900 X 550 MM. INCL. COOLANT SYSTEM WITH INTERNAL COOLANT, ELECTR. REMOTE CONTROL, FULL CABIN AND FULL DOCUMENTATION. SHUTTLE MACHINING POSSIBLE. WEIGHT: APPROX. 9000 KG. GOOD WORKING CONDITION. THE MACHINE CAN BE SEEN UNDER POWER AND IS IMMEDIATELY AVAILABLE.
Vendedor: EBM Maschinenhandel
Año de construcción: usado
Ubicación: Land-x-travel: 4000 mm<br/>y-travel: 800 mm<br/>z-travel: 600 mm<br/>control: siemens 840 d <br/>0: 26/20 kw<br/>turning speeds: 6000 u/min<br/>tool taper: sk 50 <br/>tool change unit: 50-fach <br/>rapid traverse: 32 m/min<br/>total power requirement: 80 kva<br/>weight of the machine ca.: 32 t<br/>dimensions of the machine ca.: 9,5x5,4x4,5 m<br/>swarf conveyor:  <br/>cooling unit:  <br/>high performance vertical cnc turning and milling center with sk 50 to<br/>vertical turning and milling, drilling, boring, threading, countersinking, <br/>rubbing in<br/>mobile stand construction with two processing stations for pendulum machining.<br/><br/>2 machining stations for pendulum machining, the left station with<br/>unisign carousel turning station and the right station with angle clamping table<br/>850x1200 mm.<br/><br/>karuselldrehstation with two-stage gearbox (38/27 kw, 0.8-800 min-1,<br/>turntable receiving diameter 480 mm, capto c5)<br/><br/>50x tool changer (34x sk 50 and 16x capto c5)<br/><br/><br/><br/><br/> X-TRAVEL: 4000 MM
Y-TRAVEL: 800 MM
Z-TRAVEL: 600 MM
CONTROL: SIEMENS 840 D
0: 26/20 KW
TURNING SPEEDS: 6000 U/MIN
TOOL TAPER: SK 50
TOOL CHANGE UNIT: 50-FACH
RAPID TRAVERSE: 32 M/MIN
TOTAL POWER REQUIREMENT: 80 KVA
WEIGHT OF THE MACHINE CA.: 32 T
DIMENSIONS OF THE MACHINE CA.: 9,5X5,4X4,5 M
SWARF CONVEYOR:
COOLING UNIT:
HIGH PERFORMANCE VERTICAL CNC TURNING AND MILLING CENTER WITH SK 50 TO
VERTICAL TURNING AND MILLING, DRILLING, BORING, THREADING, COUNTERSINKING,
RUBBING IN
MOBILE STAND CONSTRUCTION WITH TWO PROCESSING STATIONS FOR PENDULUM MACHINING.

2 MACHINING STATIONS FOR PENDULUM MACHINING, THE LEFT STATION WITH
UNISIGN CAROUSEL TURNING STATION AND THE RIGHT STATION WITH ANGLE CLAMPING TABLE
850X1200 MM.

KARUSELLDREHSTATION WITH TWO-STAGE GEARBOX (38/27 KW, 0.8-800 MIN-1,
TURNTABLE RECEIVING DIAMETER 480 MM, CAPTO C5)

50X TOOL CHANGER (34X SK 50 AND 16X CAPTO C5)




Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Ubicación: Land-control: heidenhain itnc 530
x-axis: 3000 mm
y-axis: 825 mm
z-axis: 600 mm
speed: maximum 8000 rpm.
tool holder: sk 50
tool magazine: 52 sites
surface l x w x h: approx. 7800 x 4200 x 3600 mm
cooling through spindle and tool
electronic hand wheel hr520
linear measuring system in x - and y-axis
laser tool break control
unisign angle milling- and drilling head
automatic positioning in the c-axis with 5° division

-technical errors and prior sale reserved. -    CONTROL: HEIDENHAIN ITNC 530 X-AXIS: 3000 MM Y-AXIS: 825 MM Z-AXIS: 600 MM SPEED: MAXIMUM 8000 RPM. TOOL HOLDER: SK 50 TOOL MAGAZINE: 52 SITES SURFACE L X W X H: APPROX. 7800 X 4200 X 3600 MM COOLING THROUGH SPINDLE AND TOOL ELECTRONIC HAND WHEEL HR520 LINEAR MEASURING SYSTEM IN X - AND Y-AXIS LASER TOOL BREAK CONTROL UNISIGN ANGLE MILLING- AND DRILLING HEAD AUTOMATIC POSITIONING IN THE C-AXIS WITH 5° DIVISION -TECHNICAL ERRORS AND PRIOR SALE RESERVED. -
Vendedor: Johannes Wiebel Werkzeugmaschinen & Industrieanlagen
Año de construcción: usado
Ubicación: Land-x-travel:3.000 mm<br/>y-travel:800 mm<br/>z-travel:600 mm<br/>working area : <br/>size clamping table 1:850 x 1.500 mm<br/>size clamping table 2:850 x 1.200 mm<br/>table load max.:1.000 kg<br/>tables height-adjustable 3 x 65 mm: <br/>feeds:: <br/>x-, y- and z-axis, stepless:5 - 32.000 mm/min<br/>max. feed power x- and y-axis:10.000 n<br/>max. feed power z-axis:16.000 n<br/>rapid in x / y / z:32 m/min<br/>working spindle: <br/>ac-main drive ? water cooled: <br/>power, s6 -60% ed:26 kw<br/>transmission ratio:2 i = 1:4 <br/>speed, stepless:30 - 6.000 1/min<br/>max. torque 40% ed:650 nm<br/>tool taper:sk 50 ? din 69871 form a <br/>spindle diameter in front bearing:90 mm 6-fach gelagert  <br/>max. boring capacity:Ø 100 mm in stahl  c45 <br/>max. Ø rigid tapping:m 40 in stahl c45 <br/>max. milling power 600 cm³/min:in stahl c45  <br/>tool changer: <br/>travelling tool magazine placed on portal column: <br/>tool places on travelling magazine:52 plätze  <br/>additional tool magazine:83 plätze  <br/>tool change time in spindle:ca. 5  sec<br/>chip to chip time:ca. 9  sec<br/>tool diam. max.:180/120 mm nebenpläzte frei/belegt  <br/>bridge tools:max. 250 x 180  mm<br/>tool length max.:400 mm<br/>tool weight max.:15 kg<br/>tool swivelling system for providing tools from the magazine in a horizontal : <br/>position for automatic insertion in angle-, boring- and milling head: <br/>measurement, weight: <br/>floor space without  swith cabinet:ca. 8,0 x 4,5 m<br/>total machine height:ca. 4,5 m<br/>weight of the machine ca.:20 t<br/>electrical  supply data: <br/>total conneted load :55 kva<br/>voltage:400 v<br/>operating frequency:50 hz<br/><br/>cnc control: siemens sinumerik 840 d combined with digital drive control, hard disk storage,15? tft - color screen,  1 gbyte hard disc, external machine control panel, qwerty-full keyboard, standard drilling and milling cycles, threading without compensation chuck, lineare interpolation, circular interpolation,  processing level swivel, helical curve etc. siemens tool management for managing tools and tool magazine, program input while editing, spindle power display, electronical handheld terminal, usb-interface, unisign diagnostic system.   chip conveyor: · installed longitudinally below the table · ejection right · discharge high ca. 1.200 mm  integrated coolant tank with lifting pump  guides, drive and measuring systems: · all axis drives with digital servomotors · direct measuring system for  x- and y-axis · z-axis with encoder measuring system · x-, y- and z-axis with high-precision linear guides for maximum precision and dynamics steel covers of the x-axis with roller guide and prallelogram drive  coolant equipment: · cooling through spindle including paper band filter · clean water tank ca. 450 l, 2 clean water pumps: · normal coolant supply 40 l/min 4 bar · high pressure pump 40 bar · monitoring the coolant pressure  · internal coolant through spindle centre taper din 69871 form a  · clamping bolt din 69872      complete enclosure, pendulum machining when the doors are closed, the working space is completely closed. the automatic sliding doors allow loading by crane. removable cover for pendulum machining. opening in the left sid panel 400 x 500 mm for insertion of long workpieces.  equipment ? complete enclosure ? radio touch probe manufacturer m&h ? angle milling head incl. pick up station ? coolant equipment with 2 coolant circuits and internal coolant through spindle ? chip conveyor ? cooling unit for spindle ? div. tool tapers sk 50 X-TRAVEL:3.000 MM
Y-TRAVEL:800 MM
Z-TRAVEL:600 MM
WORKING AREA :
SIZE CLAMPING TABLE 1:850 X 1.500 MM
SIZE CLAMPING TABLE 2:850 X 1.200 MM
TABLE LOAD MAX.:1.000 KG
TABLES HEIGHT-ADJUSTABLE 3 X 65 MM:
FEEDS::
X-, Y- AND Z-AXIS, STEPLESS:5 - 32.000 MM/MIN
MAX. FEED POWER X- AND Y-AXIS:10.000 N
MAX. FEED POWER Z-AXIS:16.000 N
RAPID IN X / Y / Z:32 M/MIN
WORKING SPINDLE:
AC-MAIN DRIVE ? WATER COOLED:
POWER, S6 -60% ED:26 KW
TRANSMISSION RATIO:2 I = 1:4
SPEED, STEPLESS:30 - 6.000 1/MIN
MAX. TORQUE 40% ED:650 NM
TOOL TAPER:SK 50 ? DIN 69871 FORM A
SPINDLE DIAMETER IN FRONT BEARING:90 MM 6-FACH GELAGERT
MAX. BORING CAPACITY:Ø 100 MM IN STAHL C45
MAX. Ø RIGID TAPPING:M 40 IN STAHL C45
MAX. MILLING POWER 600 CM³/MIN:IN STAHL C45
TOOL CHANGER:
TRAVELLING TOOL MAGAZINE PLACED ON PORTAL COLUMN:
TOOL PLACES ON TRAVELLING MAGAZINE:52 PLäTZE
ADDITIONAL TOOL MAGAZINE:83 PLäTZE
TOOL CHANGE TIME IN SPINDLE:CA. 5 SEC
CHIP TO CHIP TIME:CA. 9 SEC
TOOL DIAM. MAX.:180/120 MM NEBENPLäZTE FREI/BELEGT
BRIDGE TOOLS:MAX. 250 X 180 MM
TOOL LENGTH MAX.:400 MM
TOOL WEIGHT MAX.:15 KG
TOOL SWIVELLING SYSTEM FOR PROVIDING TOOLS FROM THE MAGAZINE IN A HORIZONTAL :
POSITION FOR AUTOMATIC INSERTION IN ANGLE-, BORING- AND MILLING HEAD:
MEASUREMENT, WEIGHT:
FLOOR SPACE WITHOUT SWITH CABINET:CA. 8,0 X 4,5 M
TOTAL MACHINE HEIGHT:CA. 4,5 M
WEIGHT OF THE MACHINE CA.:20 T
ELECTRICAL SUPPLY DATA:
TOTAL CONNETED LOAD :55 KVA
VOLTAGE:400 V
OPERATING FREQUENCY:50 HZ

CNC CONTROL: SIEMENS SINUMERIK 840 D COMBINED WITH DIGITAL DRIVE CONTROL, HARD DISK STORAGE,15? TFT - COLOR SCREEN, 1 GBYTE HARD DISC, EXTERNAL MACHINE CONTROL PANEL, QWERTY-FULL KEYBOARD, STANDARD DRILLING AND MILLING CYCLES, THREADING WITHOUT COMPENSATION CHUCK, LINEARE INTERPOLATION, CIRCULAR INTERPOLATION, PROCESSING LEVEL SWIVEL, HELICAL CURVE ETC. SIEMENS TOOL MANAGEMENT FOR MANAGING TOOLS AND TOOL MAGAZINE, PROGRAM INPUT WHILE EDITING, SPINDLE POWER DISPLAY, ELECTRONICAL HANDHELD TERMINAL, USB-INTERFACE, UNISIGN DIAGNOSTIC SYSTEM. CHIP CONVEYOR: · INSTALLED LONGITUDINALLY BELOW THE TABLE · EJECTION RIGHT · DISCHARGE HIGH CA. 1.200 MM INTEGRATED COOLANT TANK WITH LIFTING PUMP GUIDES, DRIVE AND MEASURING SYSTEMS: · ALL AXIS DRIVES WITH DIGITAL SERVOMOTORS · DIRECT MEASURING SYSTEM FOR X- AND Y-AXIS · Z-AXIS WITH ENCODER MEASURING SYSTEM · X-, Y- AND Z-AXIS WITH HIGH-PRECISION LINEAR GUIDES FOR MAXIMUM PRECISION AND DYNAMICS STEEL COVERS OF THE X-AXIS WITH ROLLER GUIDE AND PRALLELOGRAM DRIVE COOLANT EQUIPMENT: · COOLING THROUGH SPINDLE INCLUDING PAPER BAND FILTER · CLEAN WATER TANK CA. 450 L, 2 CLEAN WATER PUMPS: · NORMAL COOLANT SUPPLY 40 L/MIN 4 BAR · HIGH PRESSURE PUMP 40 BAR · MONITORING THE COOLANT PRESSURE · INTERNAL COOLANT THROUGH SPINDLE CENTRE TAPER DIN 69871 FORM A · CLAMPING BOLT DIN 69872 COMPLETE ENCLOSURE, PENDULUM MACHINING WHEN THE DOORS ARE CLOSED, THE WORKING SPACE IS COMPLETELY CLOSED. THE AUTOMATIC SLIDING DOORS ALLOW LOADING BY CRANE. REMOVABLE COVER FOR PENDULUM MACHINING. OPENING IN THE LEFT SID PANEL 400 X 500 MM FOR INSERTION OF LONG WORKPIECES. EQUIPMENT ? COMPLETE ENCLOSURE ? RADIO TOUCH PROBE MANUFACTURER M&H ? ANGLE MILLING HEAD INCL. PICK UP STATION ? COOLANT EQUIPMENT WITH 2 COOLANT CIRCUITS AND INTERNAL COOLANT THROUGH SPINDLE ? CHIP CONVEYOR ? COOLING UNIT FOR SPINDLE ? DIV. TOOL TAPERS SK 50
Vendedor: FLECKENSTEIN Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-workspace in x 1800 mm
workspace in y: 560 mm
workspace in z: 300 mm (quill stroke)
tool holder: sk 40
speed range: 30-4000 rpm
table size: 2 x approx. 900 x 550 mm (2 work tables)
total power consumption: approx. 7,5 kw / 400 v
machine weight: approx. 9000 kg

equipment / accessories:

cnc railway control siemens 810
42 x tool changer
electr. remote control
coolant system with internal coolant
full cabin
documentation
shuttle machining possible

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
each kaufinteressant can test the machine in advance under current.
 WORKSPACE IN X 1800 MM WORKSPACE IN Y: 560 MM WORKSPACE IN Z: 300 MM (QUILL STROKE) TOOL HOLDER: SK 40 SPEED RANGE: 30-4000 RPM TABLE SIZE: 2 X APPROX. 900 X 550 MM (2 WORK TABLES) TOTAL POWER CONSUMPTION: APPROX. 7,5 KW / 400 V MACHINE WEIGHT: APPROX. 9000 KG EQUIPMENT / ACCESSORIES: CNC RAILWAY CONTROL SIEMENS 810 42 X TOOL CHANGER ELECTR. REMOTE CONTROL COOLANT SYSTEM WITH INTERNAL COOLANT FULL CABIN DOCUMENTATION SHUTTLE MACHINING POSSIBLE ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EACH KAUFINTERESSANT CAN TEST THE MACHINE IN ADVANCE UNDER CURRENT.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-2 brillen op steun -- speciaal ontworpen voor het vervaardigen van hydraulische- of cylindrische buizen --  reconditioned 2005 2 BRILLEN OP STEUN -- SPECIAAL ONTWORPEN VOOR HET VERVAARDIGEN VAN HYDRAULISCHE- OF CYLINDRISCHE BUIZEN -- RECONDITIONED 2005
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-4-axis vertical machining center with two<br/>  job creation, table editing, and nc rotary table.<br/>  <br/>  cnc control: sinumerik 840 d<br/>  -----------------------------------------------------------------<br/>  workspace:<br/>  stand longitudinal travel x 1600 mm<br/>  cross travel y: 600 mm<br/>  spindle carriage stroke z: 500 mm<br/>  turntable: 855 x 600 x 150 mm from spindle nose to table surface: 190-690 mm<br/>  -----------------------------------------------------------------<br/>  drilling and milling (spindle):<br/>  direct-drive of spindle, liquid-cooled<br/>  main spindle motor max power: 26/36 kw (100 / 40% ed)<br/>  maximum speed: 12000 rpm<br/>  maximum spindle torque: 100 nm<br/>  ----------------------------------------------------------------<br/>  tool system:<br/>  tool recording system: hsk 63-a tool changer: 51 seats<br/>  torque at spindle<br/>  for the recording of angle heads<br/>  ----------------------------------------------------------------<br/>  feed system:<br/>  rapid traverse z axis speed: 5-30000 mm / min<br/>  rapid traverse speed x-axis: 5-30000 mm / min<br/>  rapid traverse speed x-axis: 5-30000 mm / min<br/>  measuring system: linear measurement system<br/>  ----------------------------------------------------------------<br/>  nc rotary table:<br/>  manufacturer: sempuco<br/>  type: skh-nc 5/051<br/>  diameter: 520 mm<br/>  clamping pressure: 63 bar<br/>  maximum speed: 11 min-1 maximum transport load: 600 kg<br/>  ----------------------------------------------------------------<br/>  dimensions: approx. 3700 x 2400 x 32 4-AXIS VERTICAL MACHINING CENTER WITH TWO
JOB CREATION, TABLE EDITING, AND NC ROTARY TABLE.

CNC CONTROL: SINUMERIK 840 D
-----------------------------------------------------------------
WORKSPACE:
STAND LONGITUDINAL TRAVEL X 1600 MM
CROSS TRAVEL Y: 600 MM
SPINDLE CARRIAGE STROKE Z: 500 MM
TURNTABLE: 855 X 600 X 150 MM FROM SPINDLE NOSE TO TABLE SURFACE: 190-690 MM
-----------------------------------------------------------------
DRILLING AND MILLING (SPINDLE):
DIRECT-DRIVE OF SPINDLE, LIQUID-COOLED
MAIN SPINDLE MOTOR MAX POWER: 26/36 KW (100 / 40% ED)
MAXIMUM SPEED: 12000 RPM
MAXIMUM SPINDLE TORQUE: 100 NM
----------------------------------------------------------------
TOOL SYSTEM:
TOOL RECORDING SYSTEM: HSK 63-A TOOL CHANGER: 51 SEATS
TORQUE AT SPINDLE
FOR THE RECORDING OF ANGLE HEADS
----------------------------------------------------------------
FEED SYSTEM:
RAPID TRAVERSE Z AXIS SPEED: 5-30000 MM / MIN
RAPID TRAVERSE SPEED X-AXIS: 5-30000 MM / MIN
RAPID TRAVERSE SPEED X-AXIS: 5-30000 MM / MIN
MEASURING SYSTEM: LINEAR MEASUREMENT SYSTEM
----------------------------------------------------------------
NC ROTARY TABLE:
MANUFACTURER: SEMPUCO
TYPE: SKH-NC 5/051
DIAMETER: 520 MM
CLAMPING PRESSURE: 63 BAR
MAXIMUM SPEED: 11 MIN-1 MAXIMUM TRANSPORT LOAD: 600 KG
----------------------------------------------------------------
DIMENSIONS: APPROX. 3700 X 2400 X 32
Vendedor: MSI Elmar Reith
Año de construcción: usado
Ubicación: Land-2 brillen op steun -- speciaal ontworpen voor het vervaardigen van hydraulische- of cylindrische buizen --  reconditioned 2005 2 BRILLEN OP STEUN -- SPECIAAL ONTWORPEN VOOR HET VERVAARDIGEN VAN HYDRAULISCHE- OF CYLINDRISCHE BUIZEN -- RECONDITIONED 2005
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-vv palletwisselaar 2 tafels -- hogedrukkoeling 15 bar -- spanentransporteur -- speciale afschermkap in aluminiumsynchrone tappingeia/ iso ingave VV PALLETWISSELAAR 2 TAFELS -- HOGEDRUKKOELING 15 BAR -- SPANENTRANSPORTEUR -- SPECIALE AFSCHERMKAP IN ALUMINIUMSYNCHRONE TAPPINGEIA/ ISO INGAVE
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-vv palletwisselaar 2 tafels -- hogedrukkoeling 15 bar -- spanentransporteur -- speciale afschermkap in aluminiumsynchrone tappingeia/ iso ingave VV PALLETWISSELAAR 2 TAFELS -- HOGEDRUKKOELING 15 BAR -- SPANENTRANSPORTEUR -- SPECIALE AFSCHERMKAP IN ALUMINIUMSYNCHRONE TAPPINGEIA/ ISO INGAVE
Vendedor: APT International
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)