We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategorías
Fabricante
- Aparatos de aspiración (7)
- Carros a control remoto (3)
- Carros de tensión rápida (2)
- Cercas (2)
- Cintas transportadoras (4)
- Descortezadora (10)
- Dispositivos elevador (13)
- Equipos de extracción para un aire limpio (3)
- Instalaciones de calefacción (10)
- Instalaciones de succión (59)
- Líneas de paletas (3)
- Máquinas combinadas (57)
- Máquinas con torno (11)
- Máquinas de afilado automático para cuchillas de cepillar (4)
- Máquinas de corte y empalme de punzones (3)
- Máquinas de recorte (1)
- Máquinas trituradoras de madera (9)
- Perfiles con dos extremos (2)
- Plantas de abastecimiento (15)
- Plantas de absorción de aserrin (1)
- Plantas para filtros de aire (1)
- Punzones de fermentación (9)
- Recortadoras hidráulicas (1)
- Sistemas de puertas (4)
- Sistemas de trituración de madera (17)
- Tornos (8)
- Tornos de madera (16)
- Trituradoras (30)
- Trituradores (15)
- Ventiladores de aspiración (8)
- más
- ABB (1)
- ADDA (1)
- AEG (1)
- AES (1)
- AGLA (1)
- AIRCRAFT (5)
- AIRCRAFT AIRSTAR (1)
- AIRHEAT (1)
- Alko (8)
- ALMAB (1)
- ALTENDORF (8)
- Alu (3)
- AMA (1)
- AMANO (1)
- AMIS (1)
- ANDERSON ANDI (1)
- ANGELO CREMONA (1)
- ATEMAG (1)
- ATLAS COPCO (1)
- AVOLA - (1)
- Babcock (2)
- Bacci (3)
- Bajler Zembrod (2)
- BALDUF (1)
- BALJER UND ZEMBROD (1)
- BALZ (1)
- BAR GAR (1)
- BARBARIC (1)
- Barberan (2)
- BARTH (1)
- BARTLING (1)
- BAUERRICHTER (1)
- BAUSOLA (1)
- BERNADO (1)
- Bernardo (2)
- BI MATIC (1)
- Biesse (15)
- BIESSE ARTECH (1)
- BIGONDRY (1)
- Bison (2)
- BLüMLINGER (1)
- BOGE (1)
- BOHM + KRUSE, RIGHI (1)
- BOHM UND KRUSE (1)
- BOSCHERT (1)
- Brandt (30)
- BREVETTI MOTTA - (1)
- Bruks (2)
- BRUKS-KLöCKNER (1)
- Bruks-Siwertell (3)
- BRüNINGHAUS (1)
- Burkle (3)
- BURKLER (1)
- BUTFERING (1)
- Bürkle (4)
- Böhl (2)
- Cambio (2)
- CAMBIO 85 (1)
- CASADEI (1)
- CATHILD (1)
- Cefla (4)
- CIMME (1)
- CIT MECCANICA (1)
- CLEANCRAFT (1)
- CMC - (1)
- CMS (1)
- CNC-STEP (4)
- CO.MA.FER (1)
- COLOMBO (1)
- COMAFER (1)
- COMEC (2)
- Compactsystem (7)
- COPCAL (1)
- COSMEC (1)
- COSTA (2)
- COSTA/ESTERER/ZENO/ZIMAC (1)
- DEC (5)
- DELTA (1)
- DHB (1)
- DIEBELS (1)
- Dietz (5)
- DIMTER (1)
- diverse (2)
- DMC (1)
- DREVOSTROJ (1)
- ECO TEC WOODY (1)
- EDELSTAHL (1)
- EINHELL (1)
- Elektror Karl W. Müller (2)
- ELU (1)
- Elumatec (2)
- ELWOOD (1)
- EMK (2)
- ENDRESS (1)
- ENO (1)
- ERRE AUTOMAZIONI (1)
- ERREBI (1)
- ERREGI (1)
- ESTA (1)
- ESTERER (1)
- ... más
La indicación de distancia no es posible porque no se pudo determinar su ubicación. El requisito previo es que su navegador permita las cookies y la determinación de la ubicación.
subcategorías
(el tercer nivel de categoría)
Cercas 2
Tornos 8
Trituradoras 30
Trituradores 15
más 1046
Fabricante:
(Categoría: 209)
ABB 1
ADDA 1
AEG 1
AES 1
AGLA 1
AIRCRAFT 5
AIRHEAT 1
Alko 8
ALMAB 1
Alu 3
AMA 1
AMANO 1
AMIS 1
ATEMAG 1
AVOLA - 1
Babcock 2
Bacci 3
BALDUF 1
BALZ 1
BAR GAR 1
BARBARIC 1
Barberan 2
BARTH 1
BARTLING 1
BAUSOLA 1
BERNADO 1
Bernardo 2
BI MATIC 1
Biesse 15
BIGONDRY 1
Bison 2
BOGE 1
BOSCHERT 1
Brandt 30
Bruks 2
Burkle 3
BURKLER 1
Bürkle 4
Böhl 2
Cambio 2
CASADEI 1
CATHILD 1
Cefla 4
CIMME 1
CMC - 1
CMS 1
CNC-STEP 4
COLOMBO 1
COMAFER 1
COMEC 2
COPCAL 1
COSMEC 1
COSTA 2
DEC 5
DELTA 1
DHB 1
DIEBELS 1
Dietz 5
DIMTER 1
diverse 2
DMC 1
EINHELL 1
ELU 1
Elumatec 2
ELWOOD 1
EMK 2
ENDRESS 1
ENO 1
ERREBI 1
ERREGI 1
ESTA 1
ESTERER 1
EWD 2
FABBRI 13
Falach 3
Felder 13
Ferrari 5
FESTO 1
Finnrose 3
FORMAT 4 3
FORMAT4 1
FRAVOL 1
FROHNE 1
FROMMIA 1
FUBO 2 1
GANNOMAT 1
GENINI 1
GERONNE 1
GIARDINA 3
Gizeta 2
GORAL 1
Graule 6
Gross 4
HAAS 1
Hammer 4
HAPFO 1
HAWA 1
Hebrock 10
HEIZOMAT 1
HELIOS 1
Hempel 4
HESS 1
HMC 1
HOFER 1
HOKU 1
HOKUTECH 1
Holz-Her 14
HOLZHER 3
HOLZING 1
HOLZKRAFT 15
HOLZMA 1
HOLZMANN 6
Homag 54
HOMBACK 1
HOUFEK 1
HSM 2
Hymmen 4
HüTTE 1
Höcker 2
IDF 1
IMA 38
IMAS 1
ISM 1
ISVE 2
Jansen 2
JKF 1
JOULIN 1
KAESER 1
KAHL 1
KALLFASS 4
KASTO 1
KLOCKNER 6
KMA 1
KNAPP 1
Koch 4
KOVOS CZ 1
KRäMER 1
Kuper 3
KÜNDIG 1
KÖLLE 1
LANDONIO 1
Lange 2
LASM 1
LBH 1
LECAB 1
LEITZ 2
LENAR 1
LH 1
Linck 5
LINDNER 2
LINI 1
LMACCHIA 1
Loher 8
LOMPAS 1
LOSER 1
LTG 1
LUCOMA 1
LUNG 1
LÖWER 1
MAF 1
MAGGI 1
MAKA 1
MARIANI 1
MARSH 1
MARTIN 1
MARX 1
MATEC 1
MATELEST 1
MAWERA 2
MAYPRO 1
MCN - 1
MEP 1
MEZ BRNO 1
Microtec 3
MONGUZZI 1
MORSÖ 7
Muhlbock 2
Mühlböck 3
MüLLER 1
Möhringer 37
N/A 4
NERLING 1
NESTO 1
Nestro 6
NETEK 1
NH HTF-U 1
NIHOT 1
NOLTING 1
Novenco 2
OMA 2
OMAL 1
OMC 1
OMEC - 1
OMEF 1
OMGA 1
OMMA 1
OPPOLD 1
OPTIMUM 4
OSKA 1
Other 2
Ott 5
PALLMANN 1
PANHANS 2
PASLODE 1
PERSKE 1
PESSA 1
PORTEX 1
PROCHERA 1
Prodeco 3
REHNEN 1
REINBOLD 4
REITZ 2
REMONNAY 1
RENNER 1
REX 1
distribuidor
autorizado
autorizado
flue capacity: 175 kW; Conventional yeld capacity: 140 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 250 mm; flue length: 950 mm; oven width: 600 mm; oven hight: 860 mm; air flow: 6300 m³/h; power consumption: 8900 W; aproximate surface to heat up: 2200 m³; area to be heated: 500/600 m²; heater height without hot air conveying pipes: 2200 mm; heater width: 930 mm; heater length: 1700 mm; weight: 615 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs.Exchangers 2 or 3 smoke revs.Inner side made of bright sheet metal for casing and insulation.Outer side made of zinc plated sheet metal.Frame made of painted profile.Feeding doors with refractory and extractable grates.Panels with refractory for pipes cleaning.Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic su ...
distribuidor
autorizado
autorizado
distribuidor
autorizado
autorizado
distribuidor
autorizado
autorizado
distribuidor
autorizado
autorizado
distribuidor
autorizado
autorizado
distribuidor
autorizado
autorizado
distribuidor
autorizado
autorizado
distribuidor
autorizado
autorizado
distribuidor
autorizado
autorizado
distribuidor
autorizado
autorizado
racks: 17; support tube spacing: 60mm; rack length: 650mm; langth: 200 - 2000mm; rolls: Polyamid 4 Stück; depth: 870 - 1180mm; height: 198mm; safe load: 400kg; The user-friendly Varioflex drying rack is aspace-saving and gentle solution for storingpainted workpieces. The four swivel castorsmean that it can also be used for transportingworkpieces.Its solid tube frame design can be adjusted between200 mm and 2,000 mm.With 17 inside and outside plastic-coated supporttubes on each side, the rack can support up to400 kg of evenly distributed weight. The plug-in inside and outsidesupport tubes can be taken out and re-inserted as needed.When not in use, the drying rack can be collapsedand takes up minimal space.
distribuidor
autorizado
autorizado
distribuidor
autorizado
autorizado
distribuidor
autorizado
autorizado
distribuidor
autorizado
autorizado
distribuidor
autorizado
autorizado
distribuidor
autorizado
autorizado
distribuidor
autorizado
autorizado
distribuidor
autorizado
autorizado
distribuidor
autorizado
autorizado
distribuidor
autorizado
autorizado
power: 40 - 100 kg/h; briquette dimensions: 60 mm; briquette length: 40 - 70 mm; automatic start-up: yes; oil preheating system: yes; max moisture: 15 %; container diameter: 1000 mm; dimensions: 1850 mm x 1170 x 1510 mm (LxBxH); motor power: 7,5 kW; power panel: with PLC and touch screen Siemens; weight: 770 kg; The briquetting machine is suitable to compact:woodcorkrubberplasticyarn fluffnatural fibreemery powderscrapings from hidespapercoffee husketc.
distribuidor
autorizado
autorizado
distribuidor
autorizado
autorizado
distribuidor
autorizado
autorizado
hourly output: 10 - 25 kg/h; briquette: cube 30mm x 30mm; drum dimension: 0,33 m³; dimensions: 1300mm x 740mm x 1200mm (L x B x H); motor Power: 2,2kW; weight: 233 kg; Very compact construction and economic operation.
distribuidor
autorizado
autorizado
distribuidor
autorizado
autorizado
A 4-level vertical dryer Giardina with a paternoster system for water-based and solvent-based coatings with flash-off, heating and drying zones is available. Workpiece length range: 300mm-3200mm, workpiece width range: 0mm-1350mm, workpiece height range: 0mm-80mm, working height: 950mm, door arrangement: vertical, number of doors: 16, number of trays: 66, levels: 4, accessibility: all sides, number of heating coils: 3. Machine dimensions X/Y/Z: approx. 5350mm/7550mm/6550mm, electrical cabinet dimensions X/Y/Z: 2500mm/500mm/2000mm. Documentation available. An on-site inspection is possible.
distribuidor
autorizado
autorizado
A Reichenbacher CNC 5-axis twin-head machining center for the door manufacturing industry is available. Spindle power: 15kW, Speed: 24000rpm, Tool interface: HSK-F63, Tool positions: 60, Milling spindle spacing: 1040mm, Spindle housing dimension: 150mm, Travel X/Y/Z: 5100mm/2100mm/2650mm, Tool change stroke: 550mm, Max. travel speed X/Y/Z: 60m/min/90m/min/20m/min, Clamping beam speed: 40m/min. Vacuum support rails: 2, Vacuum cups: 2×30, Stop stroke: 150mm, Stop pin diameter: 30mm, Through-feed stop 1/2: 300mm/700mm, Max. veneer overhang: 5mm, Max. veneer thickness: 5.5mm. Workpiece length range: 800mm-3200mm, Workpiece width range: 600mm-1400mm, Workpiece thickness range: 38mm-72mm, Max. workpiece weight: 200kg. Chip conveyor belt width: 700mm, Infeed roller conveyor dimensions X/Y: 6000mm/1600mm, Outfeed roller conveyor dimensions X/Y: 6350mm/1600mm. Overall system dimensions X/Y/Z: ap ...
distribuidor
autorizado
autorizado
A hydraulic lifting table Schmidler with a clamping unit for the woodworking industry is available. Machine dimensions X/Y/Z: approx. 12000mm/2550mm/3400mm. Documentation available. An on-site inspection is possible.
distribuidor
autorizado
autorizado
A fully automatic 4-axis Hundegger joinery machine is available. Material: structural timber, standard material: softwood, min. timber cross section X/Y: 20mm/50mm, max. timber cross section X/Y: 300mm/560mm, min. timber length in automatic operation: 300mm, max. feed rate: 25m/min, max. hydraulic pressure: 100bar. Saw blade diameter: 735mm, kerf: 6mm, saw blade thickness: 4.4mm, bore: 30mm. Cylindrical cutter diameter: 350mm, cylindrical cutter width: 120mm, cylindrical cutter inner diameter: 55mm. Machine dimensions X/Y/Z: approx. 12000mm/2400mm/2550mm, weight: approx. 13t, control system: Siemens Pentium 400 with Hundegger EKP. Documentation available. An on-site inspection is possible.
distribuidor
autorizado
autorizado
A large-format wood impregnation plant by Wichmann-Metallbau is available. Nominal volume: 28m³. An on-site inspection is possible.
Usted no ha encontrado su máquina deseada?
enviar consulta
a todos los distribuidores (no hay registro necesario)
