otras máquinas para el procesado de metales usadas para la venta (11,546)

Chuck flange, flange mount, lathe chuck flange, driving flange-Chuck flange for: three-jaw chuck, four-jaw chuck, face plate-Outer diameter: 250 mm-Short taper flange for: bayonet disk mounting DIN 55027-Cone size: 8-Hole circle: Ø 171.4 mm-Weight: 11 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate-Surface: very good-Width: 500 mm-Length: 800 mm-Height: 175 mm-Plate thickness: 26 mm-with: support ribs-Weight: 90 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck-Chuck size: 500 mm-Taper holder short taper: 6-Inside diameter: 95 mm-Hole circle: Ø 133 mm-Weight: 82 kg

Tool holder, milling holder, milling tool-Number: 2x SK50 holders-1x holder: Ø 27x 85 mm-1x holder: Ø 70 x 220 mm-Sale: only complete-Weight: 18 kg

Chuck flange, flange mount, lathe chuck flange, driving flange-Chuck flange for: three-jaw chuck, four-jaw chuck, face plate-Outer diameter: 250 mm-Short taper flange for: bayonet disk mounting DIN 55027-Cone size: 6-Hole circle: Ø 133.4 mm-Weight: 7 kg

: 8 St.range L-W-H: 710 x 510 x 900 mmpeso: 60 kgArmario de cajoneras con 7 cajones Dimensiones del cajón 600 x 435mmAltura delcajón:Carga 1 - 7, 81mmCarga 8, 173mm

Bezel, steady rest, lynette-steady rest: from lathe WMW DLZ 800-Max. Passage: Ø 260 mm-Tip height: 495 mm-Technical drawing: in the photos-Dimensions: 670/130 / H785 mm-Weight: 98 kg

Chip motor for wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks, power chucks hydraulic motor electric clamps-Berg: clamping technology chip motor type FSP 140 U-Shaft: M22 x 1.5-Dimensions: Ø 140/490 mm-Weight: 24.5 kg

Tool holder, milling holder, milling tool-Number: 3x SK50 holders-different recording sizes: see pictures-Sale: only complete-Weight: 12 kg

Chuck flange, flange mount, lathe chuck flange, driving flange-Chuck flange for: three-jaw chuck, four-jaw chuck, face plate-Outer diameter: 230 mm-Camlock mount: DIN 55029-Cone size: 6-Hole circle: Ø 6 x 133.4 mm-Weight: 10 kg

frecuencia: 50 Hzpeso: 3000 kgvoltaje: 3 x 400 Vsalida: 8,3 kWamperios: 12

Shaft vice, machine vice-Clamping diameter: 95 mm-Dimensions: 290/200/H225 mm-Weight: 24 kg

internal dimension: 550 x 730 x 400 mm0: 185 loperating pressure: 5-8 barweight: 50 kgdimensions: 0,7 x 0,6 x 1,35 mSpecification:Large lockable flap.Comfortable gloves.Multifunctional cleaning sprayer.LED lighting.Air blower.Readable pressure gauge.Adjustable air pressure regulator.Removable cleaning grid.Removable filter for dirt.Removable water collection tray.Internal dimensions (LxWxH) 550 x 730 x 400 mmInterior volume 185 lOperating pressure 5-8 barWeight 50kgDimensions L x W x H 0.7 x 0.6 x 1.35 mSince this parts cleaner has a thermostat that sets the degreaser to 50Degrees Celsius can heat up, it is advisable to use this degreasing cabinTo be used in combination with the Eurol cold degreaser HF Plus. This degreaserhas a higher flash point than the usual cold degreasers.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shaft vice, machine vice-Clamping diameter: max. 90 mm-Dimensions: 390/220/H190 mm-Number: 1x available-Price: per piece-Weight: 38 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine-Dovetail: 315 by 255 mm 40 mm high-Drawing: in the photos-Number: 2x counter bearings available-Price: per piece-Dimensions: 560/200/H285 mm-Weight: 20 kg

Machine light, machine lamp, workroom light, recessed light, LED recessed light, ceiling recessed light-Manufacturer: varialux, recessed light with LED 24V / 17W 2 pieces unused Ovp-Type: 9282-710-Connection: WAGO connector 5-pin-Quantity: 2 boxes available-Price: per box-Dimensions: 710/250/H120 mm-Weight: 3.1 kg/carton

Tool holder, milling holder, milling tool-Recording: MK4-Length: 1103 mm-extendable to: 440 mm-Measurements see: drawing in the photos-Weight: 12.9 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer-Width: 525 mm-Length: 585 mm-Plate thickness: 28 mm-Plate: is solid-Groove width: 20 mm-Grooves spacing: 127 mm-Thread: M12-Weight: 63 kg

: 2 diámetro de giro: máx. 250 mmtorretas de peaje: 2 x 12 control: Fanuc 16 T cono de herramienta: HSK 63 : 04800000181 frecuencia: 50 Hzamperaje: 168 A

Collecting pan, floor pan, collecting container, flat steel pan, collecting pan for coolant liquid-Collecting tray: for chips with coolant liquid, 1200 x 800 mm-Trough height: 400 mm, can be shortened-Rectangular cutout: 420 x 215 mm-Dimensions: 1200/800 / H400 mm-Weight: 10 kg

Rubber sealing profile, sealing plate, curing tool, seal, edge protection, solid rubber rectangular profile-Rubber sealing profile: with 2 grooves, 3 pieces-Length: 3 x 8450 mm / total 25.35 m-Cross-section: 50 x 55 mm-Groove width: 5 mm-Weight: 120 kg

Clamping angles, clamping angles, tombstones, clamping devices, mechanical clamping elements-Clamping angle for: workpiece clamping-T groove: 14 mm-T groove spacing: 64 mm-Threaded holes: M12-three-sided: can be clamped-Dimensions: 560/445/H145 mm-Weight: 170 kg/piece

Internal quick probe, length measuring device, internal precision measuring device, internal measuring device, internal measuring probe, micrometer screw-One revolution of the drum corresponds to: 0.5 mm-Interior measuring device-Measuring range: approx. 800 - 1500 mm-Weight: 5 kg

Cable reel, Cable reel, Power cable reel, Cable reel, Workshop reel, Cable drum, Wall cable drum, Workshop cable drum, Wall reel-Cable reel-Drum: Ø 300/160 mm-Weight: 11 kg

Steel holder, clamping plate with T-slot-Holder: 36 - 39 x 18 x 75 mm-Dimensions: 145/135/H170 mm-Weight: 4 kg

Nibbling machine, nibbler, nibbler, tin snips, circular shears-Power: 1800 watts-Voltage: 220 V-Max. Cutting capacity: 4.5 mm-Dimensions: 570/220/H250 mm-Weight: 10.5 kg

Nº de tejido: 202 395 longitud de trabajo: 2550 mmsalida: 2000 KN recorrido de seguimiento: 13 mmdistancia de seguridad: 176 mm

Tool holder, tool holder, milling holder, milling tool, chuck, milling cutter holder-Manufacturer: Eroglu, cutter holder with coolant channel in original packaging-Type: HSK 63-12-80-K-Art.No.: A63.04.12.K-Transport dimensions. 470/100/H95mm-Weight: 1.2 kg

Four-jaw chuck, 4-jaw chuck-Chuck size: Ø 250 mm-Hole circle: Ø 224 mm/M12-Passage: Ø 76 mm-Dimensions: 300/300/H mm-Weight: 40 kg

Vernier caliper, caliper, vernier caliper-Manufacturer: Holex, digital caliper-Art.No.: 41 5528 800-Measuring range: 0-300 mm-Measurement accuracy: 0.01 mm-Quantity: 1x calipers available-Dimension case: 1060/280/H50 mm-Weight: 3,3 kg.