otras máquinas para el procesado de metales usadas para la venta (11,536)

revolving center, revolving center point, revolving Morse taper, revolving center point, revolving lathe center, center point, centering taper-Manufacturer: Bruckner, rotating center point centering cone-Type: unfortunately without type designation-Recording: MK4-Centering tip: Ø mm-Dimensions: Ø 58 x 203 mm-Weight: 1.6 kg

Hardness tester, hardness measuring machine, hardness tester, hardness tester, impact hardness tester, hardness comparison plate, test block, calibration and adjustment plate-Manufacturer: SiB, hardness reference block test block-Type: 199HBW 5/750-Dimension box: 180/170/H35 mm-Weight: 1.4 kg

machine vice, stable vice, drill press vice-Machine vice: clamping jaws 175 x 50 mm-Clamping depth: 125 mm-Dimensions: 520/200/H125 mm-Weight: 44.7 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker, clothes locker, clothes locker -Manufacturer: Pavoy, steel locker: three-winged, compartment width 30 cm -Width: 930 mm -Depth: 500 mm -Height: 1850 mm -Doors: lockable, without lock -Number: 2x lockers available -Price: per piece -Weight: 51 kg

Dispone de una máquina de marcado láser Panasonic (estación de marcado láser) con un cabezal láser defectuoso. Recorrido X/Y/Z: 500 mm/430 mm/350 mm, rango de marcado X/Y/Z: 720 mm/430 mm/350 mm, dimensiones de la máquina X/Y: aprox. 800 mm/1900 mm. Documentación disponible. Es posible la inspección in situ.

revolving center, revolving center point, revolving Morse taper, revolving center point, revolving lathe center, center point, centering taper-Running centering tip: Mounting: MK3-Type: unfortunately without type designation-Centering tip: Ø mm-Dimensions: Ø 60 x 155 mm-Weight: 1.2 kg

Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hob cutter 6 pieces -Type: Mod.3 R1 EW 20° see photos -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 270/175/H115 mm -Total weight: 14.5 kg

Holder, reamer, tool holder, machine reamers, reamer, reaming tool, fitting knife cutting set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, holder-Manufacturer: PGH Metall, holder type 50 60 19 with reamer-Hole: Ø 20 mm-Reamer: Ø 35 mm-Dimensions: Ø 50 x 390 mm-Weight: 1.1 kg

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate-Clamping plate: with support ribs, on a solid base frame-Clamping surface: 2490 x 1225 mm-Table height: 830 mm-Plate thickness: 70 mm 10 mm stainless steel plate V4A-Plate: with support ribs-Total dimensions: 2490/1225/H830 mm-Weight: 2000 kg

Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hob cutter 6 pieces -Type: Mod.2.5 R1 EW 20° see photos -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 270/175/H125 mm -Total weight: 19.4 kg

Juegos de canales guía para diámetros: 22, 42, 47, 52, 62, 67, carga conectada: 2,4 kVA, peso: 1,8 toneladas. Con tiempos de cambio cortos, fácil manejo, máxima suavidad de funcionamiento, rodamientos hidrodinámicos, canales de guía cerrados 360, alimentación confiable de material de perfil rotacionalmente simétrico. La máquina solo se ha utilizado un poco, es posible una inspección in situ.

Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hob cutter 4 pieces -Type: Mod.2,25 R1 EW 20° see photos -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 170/170/H110 mm -Total weight: 10.6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws-Interchangeable jaws: 3-piece soft jaw set-Width: 20mm-Total dimensions: 84/60/H40 mm-Total weight: 1.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set-Top jaws: Jaw set for three-jaw lathe chucks, hard-Jaw width: 20 mm-Dimensions: see photo technical. drawing-Total dimensions: 85/66/H62 mm-Total weight: 1.7 kg

Suitable for edge preparation of all types of cutting tools with the corresponding holders and turning devices, e.g. roll cutters turning devices, e.g. cylindrical milling cutters, saw blades up to 380mm diameter, shank tools, indexable inserts and saw band coils up to 750mm diameter. Number of units: 1, table pitch circle: 600mm, table outer diameter: 800mm, machining width/height: 180/ 250mm, feed rate: 0.5-6m/min, flakkotier power: 4kW, connected load: 6.4kW, length: 2500mm, width: 1950mm, height: 2500mm, weight: 3t, operational hours counter: approx. 100h. Including documentation, without accessories or spare parts. On-site inspection is possible.

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, alignment plate-Width: 2245 mm-Length: 2500 mm-Height: 780 mm-Plate thickness: 25 mm-with: supporting ribs-Weight: 2720 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws-Top jaws: Jaw set for three-jaw lathe chuck, hard-Jaw width: 38 mm-Dimensions: see photo technical drawing-Dimensions total: 102/115/H88 mm-Total weight: 5.6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws-Top jaws: Jaw set for three-jaw lathe chuck, soft-Jaw width: 18 mm-Dimensions: see photo technical drawing-Total dimensions: 60/55/H40 mm-Total weight: 0,7 kg

Holder, reamer, tool holder, machine reamers, reamer, reaming tool, fitting knife cutting set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, holder-Manufacturer: Kämpf, clip-on holder: MK3 2 pieces-Type: A13 TGL 30-1226 1 piece-Type: A16 TGL 30-1226 1 piece-Price/Delivery: complete-Transport dimensions: 310/60/H28 mm-Total weight: 1.6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws-Top jaws: Jaw set for three-jaw lathe chuck, hard-Jaw width: 18 mm-Dimensions: see photo technical drawing-Total dimensions: 55/55/H40 mm-Total weight: 0,6 kg

Holder, reamer, tool holder, machine reamers, reamer, reaming tool, fitting knife cutting set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, holder-Manufacturer: Kämpf, clip-on holder: MK4 6 pieces-Type: A27 TGL 30-1226 1 piece-Type: A22 TGL 30-1226 1 piece-Type: A19 TGL 30-1226 4 pieces-Price/Delivery: complete-Transport dimensions: 400/240/H46 mm-Total weight: 10.2 kg

An eroding island consisting of two die-sinking EDM machines and an automation system is available. 1) Zimmer & Kreim ZK Genius 700, year of manufacture: 2015, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator output: 96A, path eroding: CIMCO, operating hours: 22056h. 2) Zimmer & Kreim ZK Genius 700, year of manufacture: 2019, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator power: 96A, path eroding: CIMCO, operating hours: 8255h. 3) Automation Zimmer & Kreim Chameleon Quad, year of construction: 2015, electrode positions: 176, pallet positions with loading drawer: 9, double rotary gripper for Erowa ITS and single gripper for UPC pallets. Overall system dimensions X/Y: approx. 3000mm/6200mm. Including a Kraft & Bauer fire extinguishing system with suction device. Documenta ...

Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hob cutter 6 pieces -Type: Mod.2 R1 EW 20° see photos -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 270/180/H115 mm -Total weight: 18.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws-Interchangeable jaws: 3-piece soft top jaw set-Width: 20 mm-Dimensions total: 84/63/H38 mm-Total weight: 1.1 kg

Dispone de un sistema de desbarbado (célula de desbarbado) para el posprocesamiento de piezas metálicas mediante un robot de enlucido. Documentación disponible. Es posible la inspección in situ.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws-Top jaws: Jaw set for three-jaw lathe chuck, soft-Jaw width: 18 mm-Dimensions: see photo technical drawing-Total dimensions: 65/55/H45 mm-Total weight: 0,8 kg

Está disponible un sistema de granallado Gutmann completamente revisado por Rösler en 2019. Documentación disponible. Es posible la inspección in situ.

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck-Manufacturer: Rohm, four-jaw chuck Ø 315 mm-Throughout: Ø 105 mm-Pole circle: Ø 235 mm / M20-Take: short taper 11-Weight: 56 kg

Thread cutter, tapping machine, tapping machine-Integrated reversing gear with fast reverse-Nominal consumption: 230 watts-Max. Cutting capacity: M6-Connection: 230 volts-Weight: 2.3 kg

Attachment holder, standard holder and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming blades, Sassex reamers, Sassex holders, tool holders, holders for drill bits, twist drills-Manufacturer: WMW SWZ, tool holder-Recording: MK6-Length: 345 mm-Dimensions: see photos-Dimensions: 620/100/63 mm-Weight: 10.1 kg