GEA GRASSOFreezing unit Freezing Unit Brand new freezing unit, GEA GRASSO, including:
1 Cascade system CO2Ammonia 2 x 160 with 2 piston compressors, models65HP ( 90kW each), and one screw compressor ( 160kW), GEA GRASSO
1 cooling tower TEVA
1 evaporative ...
máquina usada
Brand new freezing unit, GEA GRASSO, including:;
1 Cascade system CO2Ammonia 2 x 160 with 2 piston compressors, models65HP ( 90kW each), and one screw compressor ( 160kW), GEA GRASSO;
1 cooling tower TEVA;
1 evaporative condenser TEVA;
All the equipment is from 2008, but it has never been installed. It was bought by a chemical factory for their new cooling rooms, but these cooling rooms were never built.;
Advantages of the cascade system:;
Lower operating costs;
Lower capital costs;
Ammonia charge reduction;
Reduced compliance costs;
Constant positive pressure;
Quality and throughput improvements;
THOME CREPELLE37 P 20 Air compressor HIGH PRESSURE COMPRESSOR THOME CREPELLE. 3 phases work:
1ª: 8-10 bar
2ª: 20 bar
3ª: 40 bar
Includes:
- Compressor
- Dryer 50 bar (Atlas Copco model HFD 320)
- Refrigerator
Technical characteris ...
TAEENHOLCROFT Holcroft furnace Holcroft furnace TAEEN, new in 1991
Heating: Propane gas
Production 1.500 kgsh
Trays: 1066 x 533
Load tray 175 kgs
max temp 1000º C
nr of trays in the furnace: 19
nr of adjusting areas: 4
Modern ...
máquina usada
Holcroft furnace TAEEN, new in 1991;
;
Heating: Propane gas;
;
Production 1.500 kgsh;
;
Trays: 1066 x 533;
;
Load tray 175 kgs;
;
max temp 1000º C;
;
nr of trays in the furnace: 19;
;
nr of adjusting areas: 4;
Modernised in 2004;
DETERGENT / SOAPseveral Detergent/soap manufacturing line Powder, liquid and solid detergent and soap production. Versatile plant: it can be adapted to produce base material for animal feed and biodiesel.
This plant consists of the following machines:
-20.000 liters capac ...
Powder, liquid and solid detergent and soap production. Versatile plant: it can be adapted to produce base material for animal feed and biodiesel.;
;
This plant consists of the following machines:;
-20.000 liters capacity reactor;
-5,000 liter capacity reactor;
-Spray dryer;
-Additives mixer. 600 liters;
-Basic soap, additives and colour & perfums injectors Mixer. 2000 liters ;
-SIGMA Linear multiblades mixer with speed variator and weight sensors;
- Vacuum pumps for the transfer of basic ph.;
-Silos with capacity of 15 m3 Sleeves filter;
-Liquids filter. 6000 liters Blade mill;
-Steam boiler. Capacity of 1100 steam kghour;
-30.000 liters inox Tank;
-50,000 liters Fiberglass Tanks;
-Air compressor, screw system for production of 6000 lmin;
-Centrifugal oil machine for washing and separation;
-Volumetric system packing machine. With different conformers of bags and flat base formers.;
;
All the machines reflected here are in good condition. The building material is inox.
KEASERDSD 241 Rotary screw air compressor Mod: DSD 241
YOM: 2006
Max working pressure: 10 bar
FAD at working pressure: 20,7 m3min
Rated motor power: 132 kW
Max working pressure: 7,51013 bar
FAD at working pressure: 2420,715,9 m3mm
Max ...
máquina usada
Mod: DSD 241;
YOM: 2006;
Max working pressure: 10 bar;
FAD at working pressure: 20,7 m3min;
Rated motor power: 132 kW;
;
Max working pressure: 7,51013 bar;
FAD at working pressure: 2420,715,9 m3mm;
Max working pressure bar: 811,515;
Rated motor power: 132 kW;
Rated voltagePhasesFrequency: 400V350Hz;
Control VoltagePhasesFrequency: 230V150Hz;
Rated current: 270 A;
Electrical diagram: SDSD-02010.00;
Dimensions: 2225x1962x1885 mm;
Weight: 3400 kg;
;
;
DRYER:;
Refrigerant max allow pressure:;
LP side: 19,0 Bar;
HP side: 27,5 Bar;
Max working pressure: 12,0 Bar;
Max working temperature: 65 C;
VoltagePhasesFrequency: 400350;
Max absorption: 12,0 A;
Installed power: 6, 90 KW;
Protection rating: IP54;
Refrigerant: R407C;
Refrigerant charge: 6.800 Kg;
Weight: 318 Kg;
POTAINMD 900 Construction Crane Weight approx.: 240.000 kgDimensions (l x w x h) approx.: 0 x 0 x 0 mmDescription: POTAIN MD 900, with travelling undercarriage 4 boogies, 16 wheels Elctric power 350kvA Crane has to be dismantled by buyer Including Cabi ...
máquina usada
Weight approx.: 240.000 kg;Dimensions (l x w x h) approx.: 0 x 0 x 0 mm;Description: POTAIN MD 900, with travelling undercarriage; 4 boogies, 16 wheels; Elctric power 350kvA; Crane has to be dismantled by buyer; Including Cabin Hook height: 29,54 m; Jib 60 m (one Jib section not mounted); 200 t net,240 t with ballast; Max. point load 15,8 t Max. load 25t; CE certificate; Last inspection: August 2015; Additional tower sections R98A available on request; Dismantling and loading can be organized on request.; Further data as PDF in the appendix.; Test logs and individual part drawings;
MERCURY Fuel Heating Machine Weight approx.: 2000 kgDimensions (l x w x h) approx.: 4300 x 1600 x 2000 mmDescription: Fuel heating machine with compensation panels for painting booths, For further information see photos
Weight approx.: 2000 kg;Dimensions (l x w x h) approx.: 4300 x 1600 x 2000 mm;Description: Fuel heating machine with compensation panels for painting booths, For further information see photos
MGTL-400 Cutting machine Weight approx.: 350 kgDimensions (l x w x h) approx.: 800 x 1000 x 1500 mmDescription: Diameter saw 400 mm. Internal reference 330.115
Weight approx.: 350 kg;Dimensions (l x w x h) approx.: 800 x 1000 x 1500 mm;Description: Diameter saw 400 mm. Internal reference 330.115
RENNERTOP 15 screw compressor Renner RS-TOP Screw-compressor 15.0; 15 kW; Delivery at 10 bar: 1.96 m ³min-1960 lmin; Outlet: G34 "; Sound level 70 dB (A), year 2013, 13,157 h., year 2009
máquina usada
Renner RS-TOP Screw-compressor 15.0; 15 kW; Delivery at 10 bar: 1.96 m ³min-1960 lmin; Outlet: G34 "; Sound level 70 dB (A), year 2013, 13,157 h., year 2009
HURTHZK-200/1 Chamfering and Rounding Machine Weight approx.: 6000 kgDimensions (l x w x h) approx.: 9000 x 2300 x 2750 mmDescription: Max. diameter 200 mm. Maxmin. Number of teeth 6100. Max. module 4. Serial Nº 41166. Internal reference 210.371
Weight approx.: 6000 kg;Dimensions (l x w x h) approx.: 9000 x 2300 x 2750 mm;Description: Max. diameter 200 mm. Maxmin. Number of teeth 6100. Max. module 4. Serial Nº 41166. Internal reference 210.371
LORENZ Chamfering and rounding machine Weight approx.: 1500 kgDimensions (l x w x h) approx.: 2000 x 2200 x 1500 mmDescription: Max module 8. Max diameter 400 mm. Nº teeth 6-200. Internal reference 210.377
Weight approx.: 1500 kg;Dimensions (l x w x h) approx.: 2000 x 2200 x 1500 mm;Description: Max module 8. Max diameter 400 mm. Nº teeth 6-200. Internal reference 210.377
SULFURIC ACID PLANT1500 MT New Surplus other machines Sulfuric Acid Plant (Sulphuric Acid ) 1500 MT, 50 HZ, New Surplus
The equipment for this plant is still packed in the manufactures shipping crates and has never been unpacked. The plant is stored in a secure climate con ...
máquina nueva
Sulfuric Acid Plant (Sulphuric Acid ) 1500 MT, 50 HZ, New Surplus;
The equipment for this plant is still packed in the manufactures shipping crates and has never been unpacked. The plant is stored in a secure climate controlled warehouse and is being kept as per manufactures guidelines. Brief outline of some of the equipment included, 23 MW GE Thermodyn Condensing Steam Turbine Generator, Converter, Hot Inter Pass Heat Exchanger, Cold Inter Pass Heat Exchanger, Steam injection vessel, Duct transition pieces, Main Blower, Air Inlet Filter, Drying Tower (DT), DT Mist Eliminators, DT Acid Distributor System, DT Support for Packing, HRS Steam Separator, Steam Injection Exhaust Head, Heat recovery Tower(HRT), HRT Mist Eliminators Demister, HRT Acid Distributor System (stage 2)HRT, Support for Packing (stage 2), HRT Acid Distributor System (stage 1), HRT Support for Packing (stage 1), Ceramic Insulation Block, Final Absorbing Tower (FAT), FAT Mist Eliminators Demister, FAT Acid Distributor System, FAT Support for Packing, Common Acid Pump Tank, HRS Boiler Package, HRS Blowdown Sample Cooler, HRS Steam Sample Cooler, HRS Blowdown Tank, HRS Boiler ailable due to a cancelled project., HRS Blowdown Tank Exhaust Head, HRS Acid Sample Coolers, HRS Acid Sample Enclosure, HRT Pump boot, HRS Diluter, HRS Heater, HRS Preheater, Liquid Effluent Pump, Steam Injection Sparger, Main Boiler;
The Sulfuric Acid Plant is designed to be fed by solid sulfur. The equipment related to handling the solid sulfur was never purchased. However the engineering studies & design were completed and is ready to be requisitioned directly from the supplier if the new owner wishes to make the purchase. The product handled by conveyor is solid Sulphur, with the following characteristics:;
Type Dry bulk solid powder;
Sulphur 99.5 % ww;
Inorganic ash 0.4 % ww;
Carbon 0.1 % ww;
;
All the equipment is new and was never installed and therefore, the Process Technology Licence associated with the plant has never been used and can be transferred to the new owner at a very affordable cost.;
The guarantee can be provided to the new owner of the plant once the basic engineering of adapting the plant to the new site conditions have been completed. ;
The new owner of the plant will not have any restrictions on the engineering company they choose to complete the design, construction and commissioning of this plant.;
OFFICE BUILDINGS PREFABRICATED NEW SURPLUS;
Office Buildings Containerized, New Surplus Industrial Prefabricated Office Modules with Facilities. Industrial onsite operations, constructed of high quality material from one of the worlds top manufacture. Eleven (11) Containerized Office Buildings available in different sizes 10,56 m2 to 28,84 m2 Available due to a cancelled project, the new office modules are priced below new purchase cost. Contact us for complete information and diagrams.;
;
;
Quantity Size;
1 OFFICES (B143-15) Building (CONTAINER) 14,42 m2;
1 TOILETS & OFFICES Building (CONTAINER) 28,84 m2;
1 TOILETS & OFFICES Building (CONTAINER) 28,84 m2;
1 OFFICES Building (CONTAINER) 12,12 m2;
1 OFFICES Building (CONTAINER) 12,12 m2;
1 OFFICES Building (CONTAINER) 12,12 m2;
1 OFFICES Building (CONTAINER) 12,12 m2;
1 TOILETS & OFFICES Building (CONTAINER) 28,84 m2;
1 TOILETS & OFFICES Building (CONTAINER) 28,84 m2;
1 OFFICES Building (CONTAINER) 10,08 m2;
1 OFFICES Building (CONTAINER) 10,56 m2;
;
AGGLOMERATOR DRUMMining other machines Agglomerator New Surplus Great Price
2 x New Feeco Agglomerators for the mining industry in the heap leaching process. New Surplus never unused packages, stored in warehouse. Available due to a cancelled project. Great ...
Agglomerator New Surplus Great Price;
2 x New Feeco Agglomerators for the mining industry in the heap leaching process. New Surplus never unused packages, stored in warehouse. Available due to a cancelled project. Great Price below the new purchase price.;
;
;
Agglomerators Shell incl. LinerTiresGear;
Unitized Base incl. WheelsThrust RollersGuards;
Drive Assembly;
Girth Guard incl. Graphite Seal;
Girth Guard Seal Fan Filter;
Included: Girth Guard Seal Fan;
Bleed Air Fan;
Duct;
Inlet Assembly incl. Lined Chute, Support,& Labyrinth Air Seal;
Discharge Breeching incl. Liner, Stack,& Labyrinth Air Seal;
Platforms incl. Supports, Guards & Stairs;
Jacking Cradle;
Sulfuric Acid & Barren Spargers;
Gear Lubrication System;
Included: Gear Lubrication Pump;
Gear Lubrication Control Panel Instrument Junction Box;
GAIOTTO AUTOMATION Inspection Booth Weight approx.: 600 kgDimensions (l x w x h) approx.: 3000 x 2500 x 3600 mmDescription: Serial number 119030065-ISIC010M.02, Inspection booth with water curtain, Stainless steel drawer filters, removable for cleaning pur ...
máquina usada
Weight approx.: 600 kg;Dimensions (l x w x h) approx.: 3000 x 2500 x 3600 mm;Description: Serial number 119030065-ISIC010M.02, Inspection booth with water curtain, Stainless steel drawer filters, removable for cleaning purposes, Bottom tank with a float and pump to feed the water circuit and collect residues, Air suction fan with air outlet of 12.000 m3h, Total installed power 3 kW, Water consumption 30 lh, With electrical cabinet, CE Standards, For further information see photos.
GAIOTTO AUTOMATION Robot for Industrial Painting-Glazing Weight approx.: 1800 kgDimensions (l x w x h) approx.: 8500 x 6400 x 2700 mmDescription: Serial number 119050016-ISSR000H.01, Robot GA 2000 with Carousel system, 4 rotary work tables, Height of the work tables 910 mm, An ...
máquina usada
Weight approx.: 1800 kg;Dimensions (l x w x h) approx.: 8500 x 6400 x 2700 mm;Description: Serial number 119050016-ISSR000H.01, Robot GA 2000 with Carousel system, 4 rotary work tables, Height of the work tables 910 mm, Angular pitch 90 °, 2 built-in painting booths with water curtains, Diameter of the rotary platform 3200 mm, 6 axes, It allows the loading-unloading and cleaning of pieces in the platforms where the robot is not working, CE Standards, For more information see photos.
