Modelo
(Fabricante: FREUTEK)
Description: Each micrometer features two easily interchangeable anvils. This model features a 700-800 mm measurement range. Graduation: 0,01 mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 800 x 1,090 x 105 mm, weight approx.: 17 kg
Description: Each micrometer features two easily interchangeable anvils. This model features a 600-700 mm measurement range. Graduation: 0,01 mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 960 x 680 x 100 mm, weight approx.: 15 kg
Description: Material: 20CrMnTi, Usage: Suitable for grinding,milling,precision machining,double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (80x100 mm, h 40 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 255 x 120 x 120 mm, weight approx.: 10 kg
Description: Each micrometer features two easily interchangeable anvils. This model features a 500-600 mm measurement range. Graduation: 0,01 mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 605 x 860 x 75 mm, weight approx.: 10 kg
Description: Material: 20CrMnTi, Usage: Suitable for grinding,milling,precision machining,double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (50x65 mm, h 25 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 200 x 90 x 90 mm, weight approx.: 5 kg
Description: Each micrometer features two easily interchangeable anvils. This model features a 300-400 mm measurement range. Graduation: 0,01 mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 680 x 490 x 70 mm, weight approx.: 6 kg
Description: Tool holder cones BT40-ER32-100, balanced, up to 25,000 rpm, new packaged 5 pcs, lubricated in sealed bag and single pack. Set 5 pcs The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 385 x 200 x 80 mm, weight approx.: 14 kg
Description: Sturdy base with ground support surface, hardened and ground shaft. Stainless, anti-reflective chromed reading elements. Black reading scale for easy reading. Micrometric adjustment. The slightly raised edges of the sliding rod prevent the movement of the slide from damaging the graduation. The zero value and the scribing tip are aligned with the footprint of the socket (measuring range from '0'). Tracking measurements can thus be directly detected without calculation errors. Scoring point with hard metal coating. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 1,320 x 400 x 190 mm, weight approx.: 23 kg
Description: TAPS AND DIES SET 40 pcs. Professional set made of heat treated steel alloy. Taps and dies suitable for making threads on mild steel and aluminum. Supplied with key for taps and tapping bits. Protective case for transport and to always have them in order. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 330 x 210 x 50 mm, weight approx.: 2 kg
Description: Sturdy base with ground support surface, hardened and ground shaft. Stainless, anti-reflective chromed reading elements. Black reading scale for easy reading. Micrometric adjustment. The slightly raised edges of the sliding rod prevent the movement of the slide from damaging the graduation. The zero value and the scribing tip are aligned with the footprint of the socket (measuring range from '0'). Tracking measurements can thus be directly detected without calculation errors. Scoring point with hard metal coating. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 1,320 x 400 x 190 mm, weight approx.: 23 kg
Description: Material: 20CrMnTi, Use: machining, Hardness: HRC 58-62 (80x100 mm, h 40 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 320 x 120 x 120 mm, weight approx.: 12 kg
Description: Sturdy base with ground support surface, hardened and ground shaft. Stainless, anti-reflective chromed reading elements. Black reading scale for easy reading. Micrometric adjustment. The slightly raised edges of the sliding rod prevent the movement of the slide from damaging the graduation. The zero value and the scribing tip are aligned with the footprint of the socket (measuring range from '0'). Tracking measurements can thus be directly detected without calculation errors. Scoring point with hard metal coating. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 745 x 350 x 145 mm, weight approx.: 7 kg
Description: Material: 20CrMnTi, Use: machining, Hardness: HRC 58-62 (100x260 mm, h 45 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 360 x 140 x 140 mm, weight approx.: 20 kg
Description: Sturdy base with ground support surface, hardened and ground shaft. Stainless, anti-reflective chromed reading elements. Black reading scale for easy reading. Micrometric adjustment. The slightly raised edges of the sliding rod prevent the movement of the slide from damaging the graduation. The zero value and the scribing tip are aligned with the footprint of the socket (measuring range from '0'). Tracking measurements can thus be directly detected without calculation errors. Scoring point with hard metal coating. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 1,320 x 400 x 190 mm, weight approx.: 23 kg
Description: Material: 20CrMnTi, Usage: machining, Hardness: HRC 58-62 (50x65mm, h 25 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 250 x 90 x 90 mm, weight approx.: 3 kg
Description: 0-600mm 0.01, Digital scrapers with micrometric screw, Chromed stainless steel, On / off - zero - mm / inch - ABS - hold - preset +/-, Tip with carbide insert The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 855 x 390 x 295 mm, weight approx.: 11 kg
Description: Battery strapping machine for polyester strap with vibration welding. Designed to apply high tensions to the strap, it has a maximum tensioning capacity of 2800 N expressly designed for polyester, PP or PET strapping, strap width from 13mm to 16mm, thickness 0.5 - 1.2 mm. It guarantees excellent performance by combining the solidity of the mechanics with the practicality and precision of digital technology. 3.0Aih12VCD lithium battery. Recharge time 90 minutes, strapping cycles for each recharge from 100 to 220. Weight about 3 kg. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 450 x 180 x 300 mm, weight approx.: 7 kg
Description: Sturdy base with ground support surface, hardened and ground shaft. Stainless, anti-reflective chromed reading elements. Black reading scale for easy reading. Micrometric adjustment. The slightly raised edges of the sliding rod prevent the movement of the slide from damaging the graduation. The zero value and the scribing tip are aligned with the footprint of the socket (measuring range from '0'). Tracking measurements can thus be directly detected without calculation errors. Scoring point with hard metal coating. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 745 x 350 x 145 mm, weight approx.: 7 kg
Description: Magnetic force 600 Kg - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. NOTE: Free shipping to many European countries. Details can be found in the Special Terms & Conditions of this auction. Approximate shipping time: 15 working days after settlement. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 260 x 300 x 135 mm, weight approx.: 18 kg
Description: 0-600mm Reading 0.01 - Double column gauge with rod and slider in hardened stainless steel, slider with micrometric screw, Stable and dimensioned support base, Groove for a better grip, Hard metal tracing tip, Liquid crystal indicator with mm / conversion INCH, Automatic switch-off, Accuracy according to DIN862 and UNI-ISO 6906. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 940 x 320 x 380 mm, weight approx.: 6 kg
Description: TAPS AND DIES SET 40 pcs. Professional set made of heat treated steel alloy. Taps and dies suitable for making threads on mild steel and aluminum. Supplied with key for taps and tapping bits. Protective case for transport and to always have them in order. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 330 x 210 x 50 mm, weight approx.: 2 kg
Description: 0-600mm Reading 0.01 - Double column gauge with rod and slider in hardened stainless steel, slider with micrometric screw, Stable and dimensioned support base, Groove for a better grip, Hard metal tracing tip, Liquid crystal indicator with mm / conversion INCH, Automatic switch-off, Accuracy according to DIN862 and UNI-ISO 6906. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 940 x 320 x 380 mm, weight approx.: 6 kg
Description: The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W, 1 phase, Speed: 0-90-200 r/min. TAP RANGE: ISO M12,M14,M16,M18- 20,M22,M24,M27- 30,M33,M36,M42,M48 The item that is deliver ...
Description: Series of 32 Johnson parallel-plane gauge steel blocks in wooden case. Hardness HRC64 Complies with ISO 3650 - DIN 861. Gauge blocks are reference measuring instruments for checking other instruments. The package contains 32pcs of different sizes. 5-point calibration, measurement uncertainty of the deviation in the center (0.07 + 0.5 · L) µm. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 220 x 135 x 60 mm, weight approx.: 2 kg
Description: Portable idiot end mill sharpener is accurate and rapid, easy operation with no skill to grind. Can grind 2-flute, 3-flute, 4-flute end mill. With diamond grinding wheel, it can be equipped directly with an accurate angle and long service life. Standard with SDC grinding wheel for the Carbide material. Grinding Range:Φ4-Φ14, Point Angle:0°~5°, Power:220V, Motor:160W, Speed:4400rpm, Standard Equipment:Grinding wheel:SDC (for carbide material)×1, Six collets:Φ4,Φ6,Φ8,Φ10,Φ12,Φ14 The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 350 x 250 x 250 mm, weight approx.: 15 kg
Description: Precision bore gauge with two contact points, with elastic elements for centering. Lightweight and robust construction with CFRP elements for less thermal expansion and greater corrosion protection. Handle on the holder for less thermal influences. Smooth and precise transmission of the contact tip stroke via a curved segment. The different contact points with fixed hardened steel ball allow you to compose the different ⌀ to be measured. Application: For precision measurement of ⌀, roundness and cylindricity of internal bores and profiles. In wooden box. Range: 250-450 mm, Depth: 200mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 365 x 160 x 70 mm, weight approx.: 5 kg
Description: Precision bore gauge with two contact points, with elastic elements for centering. Lightweight and robust construction with CFRP elements for less thermal expansion and greater corrosion protection. Handle on the holder for less thermal influences. Smooth and precise transmission of the contact tip stroke via a curved segment. The different contact points with fixed hardened steel ball allow you to compose the different ⌀ to be measured. Application: For precision measurement of ⌀, roundness and cylindricity of internal bores and profiles. In wooden box. Range 250-450 mm, dp 1500 mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 920 x 175 x 50 mm, weight approx.: 6 kg
Description: Collet Chuck Tool holder SK40-ER25-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 75 x 197 mm, weight approx.: 14 kg
Description: Reading 0.5 HR. Ball and diamond indenter. N.5 setting blocks (3xHRC, HRBW, HRA). Max measurable height when the lead screw protector is added 100 mm, without a lead screw cover 170 mm. Measurement depth 135 mm. Durometer dimensions 185 x 465 x 640 mm. Measuring force: 588,4 N (60 Kgf) /980,7 (100 Kgf) /1471 N (150 Kgf). The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 530 x 400 x 750 mm, weight approx.: 82 kg
Description: Power 1.5 kW, water cooling, 220V power supply. 1. Laser metal welding, the basic welding seam is beautiful and fast, the operation is easy to learn, the welding is firm, and the sealing is good, 2. The portable air-cooled handheld laser welding machine adopts an integrated integrated fiber laser and is equipped with a self-developed wobble welding head. The high-tech air-cooled heat dissipation system fills the new application of hand-held welding in the laser equipment industry. It has multiple advantages such as simple operation, beautiful weld seam, fast welding speed, small size and convenient transportation. It is suitable for welding thin stainless steel plates, iron plates, and galvanized plates. , aluminum alloy and other metal materials, it can perfectly replace traditional argon arc welding, electric welding and other processes. It can be widely used in complex an ...
Description: Stacker height 1680 mm, Capacity 500 kg, Max lifting height 1300 mm, fork length 1250 mm. Certification CE. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 1,650 x 600 x 1,700 mm, weight approx.: 220 kg
Description: Collet Chuck Tool holder SK40-ER16-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 75 x 197 mm, weight approx.: 12 kg
Description: Collet Chuck Tool holder SK40-ER20-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 75 x 197 mm, weight approx.: 7 kg
Description: Material: 20CrMnTi, Usage: Suitable for grinding,milling,precision machining,double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (150x200 mm, h 50 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 370 x 180 x 140 mm, weight approx.: 22 kg
Description: Material: 20CrMnTi, Usage: Suitable for grinding,milling,precision machining,double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (100x125 mm, h 45 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 280 x 140 x 140 mm, weight approx.: 15 kg
Description: Material: 20CrMnTi, Usage: Suitable for grinding,milling,precision machining,double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (80x100 mm, h 40 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 255 x 120 x 120 mm, weight approx.: 10 kg
Description: Material: 20CrMnTi, Usage: machining, Hardness: HRC 58-62 (50x65mm, h 25 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 250 x 90 x 90 mm, weight approx.: 3 kg
Description: Material: 20CrMnTi, Use: machining, Hardness: HRC 58-62 (80x100 mm, h 40 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 320 x 120 x 120 mm, weight approx.: 12 kg
Description: Battery strapping machine for polyester strap with vibration welding. Designed to apply high tensions to the strap, it has a maximum tensioning capacity of 2800 N expressly designed for polyester, PP or PET strapping, strap width from 13mm to 16mm, thickness 0.5 - 1.2 mm. It guarantees excellent performance by combining the solidity of the mechanics with the practicality and precision of digital technology. 3.0Aih12VCD lithium battery. Recharge time 90 minutes, strapping cycles for each recharge from 100 to 220. Weight about 3 kg. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 450 x 180 x 300 mm, weight approx.: 7 kg
Description: Material: 20CrMnTi, Usage: Suitable for grinding,milling,precision machining,double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (50x65 mm, h 25 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 200 x 90 x 90 mm, weight approx.: 5 kg
Description: Material: 20CrMnTi, Use: machining, Hardness: HRC 58-62 (150x175 mm, h 50 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 450 x 180 x 150 mm, weight approx.: 26 kg
Description: Material: 20CrMnTi, Use: machining, Hardness: HRC 58-62 (100x260 mm, h 45 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 360 x 140 x 140 mm, weight approx.: 20 kg
Description: 6 Freutek ISO30-ER32 tool holder cones, balanced, up to 30,000 rpm, lubricated in sealed bag and single pack. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 365 x 65 x 150 mm, weight approx.: 5 kg
Description: 6' Hydraulic pressure 4500 Kg, Material: cast iron, Model: full size, Use: lathe The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 640 x 240 x 155 mm, weight approx.: 48 kg
Description: Tool holder cones BT40-ER32-100, balanced, up to 25,000 rpm, new packaged 5 pcs, lubricated in sealed bag and single pack. Set 5 pcs The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 385 x 200 x 80 mm, weight approx.: 14 kg
Description: 4' Hydraulic pressure 2500 Kg, Material: cast iron, Model: full size, Use: lathe The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 470 x 185 x 130 mm, weight approx.: 23 kg
Description: Pressure 3000 Kg (100x100 mm), Material: cast iron, Jaw width: 100 mm, Jaw height: 30 mm, Maximum opening: 100 mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 330 x 150 x 160 mm, weight approx.: 15 kg
Description: Measuring range HLD (170-960), Measuring direction 360°, Hardness scale: Standard Leeb, Brinell, Rockwell A, Rockwell B, Rockwell C, Vickers, Shore Hardness (HL, HB, HRB, HRC, HRA, HV, HS), in anti-shock carrying case. CE certified. absent calibration block  , Approx. Onsite Dimension. (l x w x h): 500 x 400 x 200 mm, weight approx.: 2 kg
Description: Pressure 5000 Kg (150x300 mm), Material: cast iron, Jaw width: 150 mm, Jaw height: 50 mm, Maximum opening: 300 mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 580 x 200 x 195 mm, weight approx.: 36 kg
Description: Pressure 5000 Kg (150x200 mm), Material: cast iron, Jaw width: 150 mm, Jaw height: 50 mm, Maximum opening: 200 mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 480 x 200 x 180 mm, weight approx.: 32 kg