4577 results
similar results found in category transformación de papel: otras
Número de artículo: 136766507
ES
Hersteller Seram; Modell S.65-20EAS; Baujahr 1994 Beobachtungen:
Kapazität: 65T / m; Länge: 20 Meter; Hubkraft: 3.5Tn; Motorleistung:
75kW. PERFEKTE BEDINGUNGEN. MEHR INFORMATIONEN AUF UNSERER WEBSITE.
Número de artículo: 136766506
Manufacturer Seram;Model S.65-20EAS;Year 1994 Observations: Capacity:
65T / m; Length: 20 meters; Lifting capacity: 3.5Tn; Motor power:
75kW. PERFECT CONDITIONS. MORE INFORMTION IN OUR WEBSITE.
Número de artículo: 136731066
PT
Automatic Continuous baking oven – for fully automatic production of
wafer sheets (refurbished)
- 18 cooking plates/baking tongs
- Plates dimension: 230 mm x 290 mm
- Baking plate. It is possible to produce simultaneously a wafer with
grid 5.0 x 0.8 mm and a wafer with grid 7.0 x 1.0 mm;
- Main drive with frequency- controlled three phase drive system
- 2 burners (Krom Schroder model ZKIH) with complete piping (forced
fresh air and gas), cutting and mixing valves, gas inlet Krom Schroder
with all accessor ...
Número de artículo: 136695614
NETSTAL SYNERGY 1500 460SYN (1999)
In working condition
Tonnage: 150t
Mould height min/max: 400/700
Distance between tiebars: 510 x 510
Screw diameter: 45
Max. Injection volumen: 3.022 cm3/s
Injection pressure: 1.753 bar
Core puller: 2
Air valve: 4+1 (pneumatic shut-off-nozzle)
Working hours: 93.980
Número de artículo: 136695610
NETSTAL SYNERGY 2400 1700SYN (1996)
In operation. Working in clean room.
Tonnage: 200t (limited due to production requirements)
Mould height min/max: 460/800
Distance between tiebars: 630 x 630
Screw diameter: 70
Max. Injection volumen: 3.656 cm3/s
Injection pressure: 1.801 bar
Core puller: 0
Air valve: 5+2 (pneumatic shut-off-nozzle)
Working hours: 106.220
Número de artículo: 136695505
HUSKY HYLECTRIC H600 RS80 / 70 (year 2011)
Closing force: 6000 kN
Space between columns: 1020 x 1020 mm.
Size of plates: 1440 x 1480 mm.
Stroke of the closing unit: 850/1450 mm.
Mold height (min./max.): 330/930 mm.
Mold height with support for stacked molds (min / max): 380/930 mm.
Maximum separation between plates: 1780 mm.
Expeller stroke: 200 mm.
Ejector force: 112 kN
Diameter of the columns: 168 mm.
Maximum weight of the mold: 10,400 kg.
Empty cycle: 3.2 s.
Cycle time E6: 2.3 s.
RS injection m ...
Número de artículo: 136659804
Número de artículo: 136659803
Número de artículo: 136479772
Fomaco injector for fis model PFS 200R
Número de artículo: 136444677
Eigenschaften: \ rSemi-komplette Abfüllanlage, bestehend aus
folgender Ausrüstung: \ rBottle Positioner\ Flaschenbeschriftung
Heißkleber \ rTransport von Flaschenlücken. AnwenderACMI Modell 135
Palettierer-Ausrüster \ rPack Transport mit AkkumulationsTOSA
automatische Palettier-Verpackung
machmachmachmachmachmachmachmachmachmachmachmachmachmachmachmachmachma
chmachmachmachmachmachmachmachmachmachmachmachmachmachmachmachmachmach
machmachmachmachmachmachmachmachmachmachmachmachmachers EennNeue
Ausrüstung, die n ...
Número de artículo: 136444676
Characteristics:
Semi-complete bottling line composed of the following equipment:
Bottle positioner
Air Transport
Bottle labeler hot glue
Transport of bottles
Shrinkwrapper equipment only fill SMI LSK 30F
SMI handle applicator
ACMI model 135 palletizer equipment
Pack transport with accumulation
TOSA automatic palletizer wrapping machine
Level inspector
Wijett ink coder
Compressor Atlas Atlas copco 45 KW
New equipment used only for tests.
Número de artículo: 136406317
Número de artículo: 136406316
12.000 s/h
Year 1988
Conventional dampening
Heidelberg stream feeder
Perfecting 1/1,2/0
Bacher register clamps
Powder spray WEKO
+ Version
Available immediately
Número de artículo: 136406314
Geradeaus CPC 1 02 ALCOLOR mit BALDWIN + Version \ r51 Mill.
Impressionen \ n\ frei von Schäden \ nAvailable immediately.
Número de artículo: 136406313
Straight
Size 36 x52 cms
CPC 1 02
ALCOLOR with BALDWIN
AUTOMIX Baldwin
Powder spray WEKO
+ Version
51 Mill. Impressions
Free of damages
Available immediately.
Número de artículo: 136406312
Gerade Maschine KOMPAC III Dämpfung + Version Weko Pulverspray
Bacher Registerklemmen \ rfrei von Schäden
Número de artículo: 136406311
Straight machine
KOMPAC III dampening
+ Version
Weko powder spray
Bacher register clamps
Free of damages
Número de artículo: 136369509
US
Fünf-Axis High Dynamic CNC-Fräsmaschine Spindle Speed 18.000 U/min;
Tabelle 177 \ "x 59 \", Reisen: x-134 \ ", Y-56 \", Z-84 \ ";
Heidenhain 530 CNC-Steuerung; 50 Station ATC-50 Taper; (2) Universal
5-Achsen-Käköpfe; HSK-63A Tooling; Chip-Förderer; M & H RWP38.41
Radio-Wave Touch Probe, #2448
Número de artículo: 136369508
Five-Axis High Dynamic CNC Milling Machine
Spindle Speed 18,000 RPM; Table 177" x 59", Travels: X - 134", Y -
56", Z - 84"; Heidenhain 530 CNC Control; 50 Station ATC - 50 Taper;
(2) Universal 5-Axis Heads; HSK-63A Tooling; Chip Conveyor; M&H
RWP38.41 Radio-Wave Touch Probe, #2448
Número de artículo: 136334113
DMG MORI SEIKI-DMC 1035 V Ezoline. Estado perfecto! X-1,035 mm, Y-560
mm, Z-510 mmmesa trabajo, portaherramienta SK40 1200 x 560 mm, carga
máxima mesa de 1.000 kgDimensiones: 4,0 x 4,0 x 2,9 mt
Número de artículo: 136334112
DMG MORI SEIKI - DMC 1035 V ecoline. Very good working condition! X -
1,035 mm, Y - 560 mm, Z - 510 mm
, plate, tool holder SK40 1200 x 560 mm, max plate load de 1.000 kg
CNC - D 840 Siemens
Weight 4,5 t
Dimensions: 4.0 x 4.0 x 2,9 mt
Número de artículo: 136222834
HEIDELBERG CD102-6L, 72 x 102cm), Alter c.1999, Seriennummer 541397,
ca. 186 Millionen, CP2000, Alcolor mit Vario, Preset, Elektronische
Simenverts, Autoplate, Preloader auf Schienen,
Non-Stopp-Feeder/Lieferung, Stahlplatte in Zuführung und Lieferung,
programmierbare ink/Decke /imp cyl via CP Tronic, Heidelberg
Beschichtungsanlage, Intercom, Grafix IR Trocknung, Grafix
Kältetement-Lemp Control, Grafix Exatronic plus Pulverspray,
Número de artículo: 136222833
HEIDELBERG CD102-6LX(72 x 102cm), Age c.1999, serial no.541397, circa
186 million, CP2000, Alcolor with Vario, Preset, Electronic sidelays,
Autoplate, Preloader on rails, Non stop feeder/delivery, Steel plate
in feeder and delivery, Programmable ink/blanket/imp cyl via CP
Tronic, Heidelberg coating unit, Intercom, Grafix IR drying, Grafix
Refrigeration/ ink temp control, Grafix Exatronic plus powder spray,
Número de artículo: 136222828
HEIDELBERG CD102-6X-72 x 102cm), Alter c.2003, Serien-no.545141, ca.
252 Millionen, Silberserien, CP2000, Alcolor mit Vario, Preset,
Autoplate, Non-Stop-Feeder, Preloader, programmierbare
rollbare/bla/imp. Zyl. Waschen über CP2000, Technotrans beta C
kombinierte Refrig/inkt-Tempel, Graphix exatronisches Pulverspray,
Luft-Transfer zwischen den Einheiten, Non stoplieferung, Intercom,
Heidelberg drystar IR Dryer, Heidelberg Rollenlackierer, Extended
delivery
Número de artículo: 136222827
HEIDELBERG CD102-6LX(72 x 102cm), Age c.2003, serial no.545141, circa
252 million, Silver series press, CP2000, Alcolor with Vario, Preset,
Autoplate, Non stop feeder, Preloader, Programmable roll/bla/imp. cyl.
wash via CP2000, Technotrans beta C combined refrig/ink temp, Graphix
exatronic powder spray, Air transfer between units, Non stop
delivery, Intercom, Heidelberg drystar IR Dryer, Heidelberg roller
coater, Extended delivery
Número de artículo: 136186558
KOMORI L540 SP-72 x 102cm), Alter c.2005, Seriennummer 125, ca. 88
Millionen, PQC, PDC-S11 Spectrodensitometer, Komorimatik, APC
(Automatische Plattenwechsel), AMR (Automatische Verfügung), Pre
Inking, Non-Stopp-Feed/Lieferung, Inkvibrator Kühlung, programmierbar
Rohket/roller/imp. Zylinderwäsche, Pierry IR Dryer, Elektro-Sicherei,
Tresu Refrigeration-/Ink-Temp-Steuerung (wassergekühlt),
automatisierte Pfahlverstellung (seitliche Steuerung), Weko AP262
Pulverspray, Stahlplatte in Feeder und Lieferung, KMS (Komo ...
Número de artículo: 136186557
KOMORI L540 SP(72 x 102cm), Age c.2005, serial no.125, circa 88
million, PQC, PDC-S11 Spectrodensitometer,Komorimatics, APC (Automatic
Plate Changing), AMR (automatic make ready), Pre Inking, Non stop
feed/delivery, Ink
vibrator cooling, Programmable blanket/roller/imp. cylinder wash,
Pierry IR Dryer, Electric sidelays, Tresu Refrigeration/ Ink Temp
Control (water cooled), Automated pile adjustment ( sidewasy control),
Weko AP262 Powder Spray, Steel plate in feeder and delivery, KMS
(Komori Managament System), CIP ...
Número de artículo: 136114450
Engel 110 Tonnen ungeschaltendes IMM. Diese Maschine hat neue Schraube
und Fass. Maschine wird komplett geprüft und getestet geliefert! \
rTechnical Details INJECTION VOLUMEN 154 cm3WORKING HOURS 65.725 \
rTRAVEL OPENING 500 mmINJECTION PRESSURE 1.600 bar\. MOULD HIGHT 250
mmSCREW DIAMETER 35 mmYEAR OF BUILDING 2000CLAMPING FORCE 1.100 kN
Número de artículo: 136114449
Engel 110 tons tie-bar-less IMM. This machine has new Screw and
barrel. Machine will be delivered complete checked and tested !
Technical details
INJECTION VOLUMEN 154 cm3
WORKING HOURS 65.725
TRAVEL OPENING 500 mm
INJECTION PRESSURE 1.600 bar
MIN. MOULD HIGHT 250 mm
PLATEN SIZE 730 x 600 mm
SCREW DIAMETER 35 mm
YEAR OF BUILDING 2000
CLAMPING FORCE 1.100 kN
Número de artículo: 136114448
400 Tonnen ENGEL, gebundungsloser Spritzgussmaschine mit integriertem
ENGEL-Roboter. \ r \ n \ n \ nTechnische Details INJECTION VOLUMEN
848cm3SCREW DIAMETER 60mmNOMINAL CAPACITY OF PUMP MOTOR 45 kWTRAVEL
OPENING 950 mmPLATEN SIZE 1.300 x 740 mm \ RCLAMPING FORCE 4.000
kNYEAR OF BUILDING 2002WORKING HOURS 69900DAYLIGHT MAX 1.300 mm MOULD
HIGHT 350 mm
Número de artículo: 136114447
400 tons ENGEL tie-bar-less injection mouding machine with integrated
ENGEL robot.
Technical details
INJECTION VOLUMEN 848cm3
SCREW DIAMETER 60mm
NOMINAL CAPACITY OF PUMP MOTOR 45 kW
TRAVEL OPENING 950 mm
PLATEN SIZE 1.300 x 740 mm
CLAMPING FORCE 4.000 kN
YEAR OF BUILDING 2002
WORKING HOURS 69900
DAYLIGHT MAX 1.300 mm
MIN. MOULD HIGHT 350 mm
Número de artículo: 136114446
Njection Moulding Maschine 1600 Tonnen Spannkraft inkl. Roboter TE
14Technische Details CLAMPING FORCE 1650DISTANCE BETWEEN TIE BARS (h x
v) 1800x1400PLATEN SIZE 25x2120TRAVEL OPENING 1800x2500MIN. MOULD
HIGHT 900/1600DISTANCE BETWEEN TIE BARS (h x v) 270INJECTION PRESSURE
2020 BarINJECTION VOLUMEN 3927 cm3YEAR VON BUILDING 2002
Número de artículo: 136114445
njection Moulding machine 1600 Tons of clamping force incl. robot TE
14
Technical details
CLAMPING FORCE 1650
DISTANCE BETWEEN TIE BARS (h x v) 1800x1400
PLATEN SIZE 2520x2120
TRAVEL OPENING 1800x2500
MIN. MOULD HIGHT 900/1600
DISTANCE BETWEEN TIE BARS (h x v) 270
INJECTION PRESSURE 2020 bar
INJECTION VOLUMEN 3927 cm3
SCREW DIAMETER 100
YEAR OF BUILDING 2002
Número de artículo: 136114438
175 Tonnen Krauss-Maffei-Spritzgießmaschine saniert Neue Dichtungen
in Spanneinheit. \ r \ n \ n \ nTechnische Details PLATEN SIZE
915x915rCLAMPEN ING FORCE 1750 knDISTANCE BETWEEN TIE BARS (h x v)
560x560\. MOULD HIGHT 350mmTRAVEL OPENING 700mmSCREW DIAMETER
45mmDAYLIGHT MAX 1050mmYEAR OF BUILDING 2002\ nINJECTION VOLUMEN
275cm3SHOTWEIGHT 1878 barSHOTWEIGHT 250grWORKING HOURS 54600\
Número de artículo: 136114437
175 tons Krauss-Maffei injection moulding machine reconditioned. New
seals in clamping unit.
Technical details
PLATEN SIZE 915x915
CLAMPING FORCE 1750 kn
DISTANCE BETWEEN TIE BARS (h x v) 560x560
MIN. MOULD HIGHT 350mm
TRAVEL OPENING 700mm
SCREW DIAMETER 45mm
DAYLIGHT MAX 1050mm
YEAR OF BUILDING 2002
INJECTION VOLUMEN 275cm3
SHOTWEIGHT 1878 bar
SHOTWEIGHT 250gr
WORKING HOURS 54600
Número de artículo: 136114433
200 tons ENGEL 2-shot tie bar less injection moulding machine with
rotary table on moving platen. Machine will be tested, repaired and
checked and can be shown under power !
Technical details
WORKING HOURS 70.000
CLAMPING FORCE 2.000 kN
YEAR OF BUILDING 2002
Número de artículo: 136114434
200 Tonnen ENGEL 2-Schuss-Spannstange weniger Spritzgießmaschine mit
Drehtisch auf beweglicher Platte. Maschine wird getestet, repariert
und unter Strom gezeigt werden!
Número de artículo: 136114430
300 Tonnen gebundene IMM im Jahr 2008 mit CC 200-Steuerung gebaut,
integrierter Engel-Roboter ERC 33/2-F, Kran für die Formenbefestigung
(2Tonnen), 16 Heißkanel, Akku für schnelle Einspritzung und
Parallelbewegungen. 2 Kernzieher fixieren platen, Durchflussmesser,
Transportband. Plastizisierende Schraube bimetalisch. \ r \ n \ r \
nTechnische Details YEAR VON BUILDING 2008CLAMPING FORCE 3.000
kNPLATEN SIZE 1.100 x 1.000 mmSCREW DIAMETER 55 mmINJECTION PRESSURE
1.616/2.053 barINJECTION VOLUMEN 511 cm3NOMINAL CAPA ...
Número de artículo: 136114429
300 tons tie-bar-less IMM built in 2008 with CC 200 control,
integrated Engel robot ERC 33/2-F, crane for mould fixing (2tons), 16
hot chanel, accumulator for fast injection and parallel movements. 2
core puller fix platen, flow meter, transport belt. Plastizising screw
bimetalic.
Technical details
YEAR OF BUILDING 2008
CLAMPING FORCE 3.000 kN
PLATEN SIZE 1.100 x 1.000 mm
SCREW DIAMETER 55 mm
INJECTION PRESSURE 1.616/2.053 bar
INJECTION VOLUMEN 511 cm3
NOMINAL CAPACITY OF PUMP MOTOR 45 kW
TRAVEL OPENING ...
Número de artículo: 136114426
KRAUSS-MAFFEI KM 350/1900 C1, año 2000. Diese Maschine wird komplett
repariert und getestet geliefert und kann unter Strom gezeigt werden!
Es besteht die Möglichkeit, die Maschine mit dem Roboter Sepro zu
kaufen! \ rEquipment: 6 Kernzieher, Roboterschnittstelle. \ r \ n \ r
\ r \ nTechnische Details \ nWORKING HOURS 85000SCREW DIAMETER 60
mmTRAVEL OPENING 920 mmDAYLIGHT MAX 1.300 mm\ @ @ MOULD HIGHT
530-1.450 mmDISTANCE BETWEEN TIE BARS (h x v) 710 x 710 mmPLATEN SIZE
1.100 x 1.120 mmYEAR OF BUILDING 200nYEAR OF ...
Número de artículo: 136114425
KRAUSS-MAFFEI KM 350/1900 C1 , año 2000 . This machine will be
delivered complete checked repaired and tested and can be shown under
power ! Possibility to buy machine with Sepro robot !
Equipment: 6 core-pullers, robot interface.
Technical details
WORKING HOURS 85000
SCREW DIAMETER 60 mm
TRAVEL OPENING 920 mm
DAYLIGHT MAX 1.300 mm
MIN. MOULD HIGHT 530 - 1.450 mm
DISTANCE BETWEEN TIE BARS (h x v) 710 x 710 mm
PLATEN SIZE 1.100 x 1.120 mm
YEAR OF BUILDING 2000
CLAMPING FORCE 3.500 kN
NOMINAL CA ...
Número de artículo: 136114422
Engel 60 bis Krawatte weniger IMM erhöhte Spannkraft auf 800 kN von
Engel. Maschine komplett geprüft und getestet eine mit neuem
Gusskörper auf Spannseite. \ r \ r \ nTechnische Details WORKING
HOURS 45.855INJECTION VOLUMEN 154 cm3INJECECTION PRESSURE 1.581/2.190
barYEAR OF BUILDING 2003SCREW DIAMETER 35 mmTRAVEL OPENING 457
mmCLAMPING FORCE 800 kN
Número de artículo: 136114421
Engel 60 to tie-bar less IMM increased clamping force to 800 kN by
Engel. Machine complete checked and tested an with new cast body on
clamping side.
Technical details
WORKING HOURS 45.855
INJECTION VOLUMEN 154 cm3
INJECTION PRESSURE 1.581/2.190 bar
YEAR OF BUILDING 2003
SCREW DIAMETER 35 mm
TRAVEL OPENING 457 mm
PLATEN SIZE 670 x 600 mm
CLAMPING FORCE 800 kN
Número de artículo: 136070173
1475 KW Caterpillar G3516C Natural Gas Sound Enclosed Generator
Sets\(25) 1475 KW Caterpillar G3516C Natural Gas Sound Attenuated
Containergenerator Sets, Die Doppelfrequenz wird auf 50 HZ oder 60 HZ,
1500/1800 U/min, 400/480 Volt, Jahr 2012 bis 2014 wurden alle
Leistungspakete nach OEM-Wartungsplan gewartet. Alle
Erdgas-Strompakete sind in gutem Zustand und können an jeden
weltweiten Standort transportiert werden, um sofort Strom zu
produzieren. Bitte kontaktieren Sie uns.
Número de artículo: 136070172
1475 KW Caterpillar G3516C Natural Gas Sound Enclosed Generator Sets
Twenty Five (25) 1475 KW Caterpillar G3516C Natural Gas Sound
Attenuated Containerized Generator Sets, dual frequency will operate
on 50 HZ or 60 HZ, 1500/1800 rpm, 400/480 volt, Year 2012 to 2014, all
power packages were maintained in accordance with OEM maintenance
schedule.All natural gas power packages are in good condition and can
be transported to any worldwide location to produce immediate power.
Please serious inquiries contact us.
Número de artículo: 135928792
Peristaltic pump.
Brand Name: DL.
Type: 55
Year: 1998
8, 2M3/h
4 Kw
1420/40 Rpm
10 bar pressure
Dimensions: 1.000 mm wide, 1,000 mm long, 2,000 mm high.
Número de artículo: 135891098
MCS BEAM DYEING FOR FABRIC, YEAR 1973WORKING WIDTH 2.000 MMMANUAL
PROGRAMMER TIME/TEMPERATURE \ r \ nINTERNAL DIAM. 1.100 MMCAPACITY
2.000 LTWO BEAMS UND ONE TROLLEY
Número de artículo: 135891096
NOSEDA BEAM DYEING FOR FABRIC, YEAR 1978WORKING WIDTH 3.200
MMTHERMOELETTRONICA PROGRAMMER CT 401nINTERNAL DIAM. 1.100 MMCAPACITY
5.000 LONE BEAM AND ONE TROLLEY
Número de artículo: 135891091
NOSEDA BEAM DYEING FOR FABRIC, YEAR 1979WORKING WIDTH 3.200
MMTHERMOELETTRONICA PROGRAMMER CT 401nINTERNAL DIAM. 1.100 MMCAPACITY
5.000 LTWO BEAMS UND ONE TROLLEY
Número de artículo: 135891084
MCS BEAM DYEING FOR FABRIC, YEAR 1970WORKING WIDTH 2.000
MMTHERMOELETTRONICA PROGRAMMER CT 411INTERNAL DIAM. 1.120 MMCAPACITY
3.000 LTWO BEAMS UND ONE TROLLEY
Usted no ha encontrado su máquina deseada?
enviar consulta
a todos los distribuidores (no hay registro necesario)
