192 ofertas

Año de construcción: usado
Precio: 5.600 €
Ubicación: Land-it is a used reconditioned fritsch compass sheeter with automatic reel and automatic flour duster for sale. the machine runs quietly, new bands were mounted. 

  IT IS A USED RECONDITIONED FRITSCH COMPASS SHEETER WITH AUTOMATIC REEL AND AUTOMATIC FLOUR DUSTER FOR SALE. THE MACHINE RUNS QUIETLY, NEW BANDS WERE MOUNTED.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Ubicación: Land-for making rustic-square rolls, capacity approx. 7.000 pcs./h \r\ndoughweightrange 40 - 150 g - depends on the dough,\r\nstainless steel coverplates, righthand - operation\r\n2 flour duster at the infeed\r\nwithout electrical control pane FOR MAKING RUSTIC-SQUARE ROLLS, CAPACITY APPROX. 7.000 PCS./H \R\NDOUGHWEIGHTRANGE 40 - 150 G - DEPENDS ON THE DOUGH,\R\NSTAINLESS STEEL COVERPLATES, RIGHTHAND - OPERATION\R\N2 FLOUR DUSTER AT THE INFEED\R\NWITHOUT ELECTRICAL CONTROL PANE
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-used croissant line fritsch, type: ctr 700 -in bakery condition- 

- calibrating head, type: kk-88-700r 
- flour duster, type: msg 0700-2, bj. 2010 
- stamping unit, type: ctr-700-30-msk-r 
- winding unit, type: crh-120-400-r
- capacity: approx. 4.000 pcs./h

inspection and test run are possible at every time. USED CROISSANT LINE FRITSCH, TYPE: CTR 700 -IN BAKERY CONDITION- - CALIBRATING HEAD, TYPE: KK-88-700R - FLOUR DUSTER, TYPE: MSG 0700-2, BJ. 2010 - STAMPING UNIT, TYPE: CTR-700-30-MSK-R - WINDING UNIT, TYPE: CRH-120-400-R - CAPACITY: APPROX. 4.000 PCS./H INSPECTION AND TEST RUN ARE POSSIBLE AT EVERY TIME.
Vendedor: In.Ha.TEC Vertrieb & Service UG
Año de construcción: usado
Ubicación: Land-diosna dough machine
model: s 35

for max 35 kg dough
stainless steel boiler and mixing arm
flour dust hood with protective circuit
2 courses with timer
machine movable with adjuster
checked dguv v3
connection 400v, 16a-cee plug

reconditioned second-hand machine
with 6 months warranty
DIOSNA DOUGH MACHINE MODEL: S 35 FOR MAX 35 KG DOUGH STAINLESS STEEL BOILER AND MIXING ARM FLOUR DUST HOOD WITH PROTECTIVE CIRCUIT 2 COURSES WITH TIMER MACHINE MOVABLE WITH ADJUSTER CHECKED DGUV V3 CONNECTION 400V, 16A-CEE PLUG RECONDITIONED SECOND-HAND MACHINE WITH 6 MONTHS WARRANTY
Vendedor: Milbrandt GmbH
Año de construcción: usado
Precio: 17.800 €
Ubicación: Land-; power [ps]: 69; front tyre size: 280/70-18; rear tyre size: 280/70-18; rear tyres remaining: 100; front tyres remaining: 100; accessories: gänge vorwärts:12, gänge rückwärts:4, motorhersteller:vm, steuergerät - doppelt wirkend (2x), hydraulische lenkung, diesel ; POWER [PS]: 69; FRONT TYRE SIZE: 280/70-18; REAR TYRE SIZE: 280/70-18; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; ACCESSORIES: GäNGE VORWäRTS:12, GäNGE RüCKWäRTS:4, MOTORHERSTELLER:VM, STEUERGERäT - DOPPELT WIRKEND (2X), HYDRAULISCHE LENKUNG, DIESEL
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-year: 2016, serial number: 7442011, weight of 585 kg, accessories: 1 ditch room shovel ã?l㶠210 h euro, built in: 2016, weight: 251 kg, serial number: 0784109, volume (clustered): 0.82 m3, cutting width: 2,100 mm, depth: 810 mm, height: 750 mm, anmerkunen to the state: div. rust spots, abrasions YEAR: 2016, SERIAL NUMBER: 7442011, WEIGHT OF 585 KG, ACCESSORIES: 1 DITCH ROOM SHOVEL Ã?Lö 210 H EURO, BUILT IN: 2016, WEIGHT: 251 KG, SERIAL NUMBER: 0784109, VOLUME (CLUSTERED): 0.82 M3, CUTTING WIDTH: 2,100 MM, DEPTH: 810 MM, HEIGHT: 750 MM, ANMERKUNEN TO THE STATE: DIV. RUST SPOTS, ABRASIONS
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Ubicación: Land-reactor (1x), make büchi uster ag, no 111158, new 1993, material stainless steel (1.4571), capacity 5,0 ltr, vessel sizes dia. 150x250mm, dished bottom , cover with stirrer can be lifted (hoist), outlet dia. 10mm, working pressure 40 bar, with jacket (1,2 ltr), working pressure 12 bar, max. temperature 250 degr. c., with anchor stirrer, motor 1,35 kw, 220/380 volt (ex), speed mixing shaft variable (± 0-1800 rpm), mounted on legs, floorspace 1,2x0,8 m, total height 2,2 m, weight 450 kgreactorsreactors > reactors REACTOR (1X), MAKE BüCHI USTER AG, NO 111158, NEW 1993, MATERIAL STAINLESS STEEL (1.4571), CAPACITY 5,0 LTR, VESSEL SIZES DIA. 150X250MM, DISHED BOTTOM , COVER WITH STIRRER CAN BE LIFTED (HOIST), OUTLET DIA. 10MM, WORKING PRESSURE 40 BAR, WITH JACKET (1,2 LTR), WORKING PRESSURE 12 BAR, MAX. TEMPERATURE 250 DEGR. C., WITH ANCHOR STIRRER, MOTOR 1,35 KW, 220/380 VOLT (EX), SPEED MIXING SHAFT VARIABLE (± 0-1800 RPM), MOUNTED ON LEGS, FLOORSPACE 1,2X0,8 M, TOTAL HEIGHT 2,2 M, WEIGHT 450 KGREACTORSREACTORS > REACTORS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-working area – flow direction is from left to right
chuck diameter	mm	250
workpiece diameter	mm	140
center height - depending on mounted parts
mm	630
workpiece
length - depending on additional parts	mm	630
weight	kgs	20
6-position end machining turret head for cut to length and centering – a1 – track 1
driven tools	positions	6
1 position below and above with internal cooling		
workpiece gripper	position	1
tool taper	hsk	c63
tool diameter	mm	120
tool length	mm	120
spindle rotation speed	rpm	3.000
power requirement at 40% / 100% duty cycle	kw	47 / 31
torque at 40% / 100% duty cycle	nm	150 / 100
travel – x-axis	mm	143 / -192
travel – z-axis	mm	715
rapid motion – x-axis	m/min	30
rapid motion – z-axis 	m/min	40
nc-machine vice – track 2
w1 – vertical stroke max.	mm	445
distance machine vice – on top / at the bottom	mm	915
gripper stroke / gripping jaw	mm	15
clamping force	kn	24
12-position disc turret head – a2 – track 3
static tools	positions	11
workpiece gripper	position	1
shaft diameter din 69880 – vdi	mm	40
spindle rotation speed max.	rpm	6.000
nominal speed	rpm	3.000
torque at 10% duty cycle	nm / kw	40 / 13,5
torque at 25% duty cycle	nm / kw	30 / 9,0
torque at 100% duty cycle	nm / kw	15 / 4,5
travel – x-axis	mm	150 / -150
travel – z-axis	mm	735
rapid motion – x-axis	m/min	30
rapid motion – z-axis 	m/min	40
mainspindle – headstock on top with motor spindle – track 4
spindle head  din 55026-a	größe 	6
spindle diameter in front bearing	mm	110
spindle rotation speed max. 	u/min	5.000
power requirement at 40% / 100% duty cycle	kw	38 / 29
torque at 40% / 100% duty cycle	nm	250 / 200
headstock – w2 vertical stroke max.	mm	420
self-centering nc-steady rest – vertical stroke	mm	420
self-centering nc-steady rest – horizontal stroke	mm	190
tailstock – fixed		
12-position disc turret head – a3 – track 5
driven tools	positions	11
workpiece gripper	position	1
shaft diameter din 69880 – vdi	mm	40
spindle rotation speed max.	rpm	6.000
nominal speed	rpm	3.000
torque at 10% duty cycle	nm / kw	40 / 13,5
torque at 25% duty cycle	nm / kw	30 / 9,0
torque at 100% duty cycle	nm / kw	15 / 4,5
travel – x-axis	mm	150 / -150
travel – z-axis	mm	735
rapid motion – x-axis	m/min	30
rapid motion – z-axis 	m/min	40
electrics
electrics – voltage / frequency	v/hz	400 / 50
connected load	kw	70
machine dimension and weight
machine weight approx.	kgs	23.000
dimension of the machine	mm	6.800 x 4.300
height of the machine	mm	4.000

accessories and further information:

cnc-control system siemens 840d
tft-colour display
savety integrated
workpiece storage and transport system
3 unit workpiece gripper:	workpiece weight max.	20 kg
				clamping diameter	75 mm
				clamping force		2,4 kn
oval conveyor system with pallets for storing raw parts, storage capacity for 34 
raw parts automatic loading with workpiece gripper in disc turret head a1
workpiece diameter max.	140 mm
workpiece height max.	630 mm
oval conveyor system with pallets for storing machined workpieces, storage capacity 
for 17 workpieces,
workpiece diameter max.	140 mm
workpiece height max.	630 mm
1 self centering steady rest, movable – the axis movements are nc-controlled
workpiece diameter 8 – 90 mm
doublepressure, 2 clamping pressures can be adjusted, in the part program, these are 
picked up via m function if required
3-jaw shaft power chuck, Ø 210 mm, max. 3.500 rpm, manufacturer roehm, (track 4)
coolant attachment with paper belt filter system, coolant tank approx.. 1.200 l,
supply high-low pressure 30 bar at 40l/min – 8 bar at 80 l/min, coolant filtration 50 µm, paper belt filter, paper width 710 mm, filter fineness 30 µm
chip conveyor - hinged belt conveyor, discharge height 1.250 mm
dust- and oil mist exhauster, air volume 1.600 cbm/h

  WORKING AREA – FLOW DIRECTION IS FROM LEFT TO RIGHT CHUCK DIAMETER MM 250 WORKPIECE DIAMETER MM 140 CENTER HEIGHT - DEPENDING ON MOUNTED PARTS MM 630 WORKPIECE LENGTH - DEPENDING ON ADDITIONAL PARTS MM 630 WEIGHT KGS 20 6-POSITION END MACHINING TURRET HEAD FOR CUT TO LENGTH AND CENTERING – A1 – TRACK 1 DRIVEN TOOLS POSITIONS 6 1 POSITION BELOW AND ABOVE WITH INTERNAL COOLING WORKPIECE GRIPPER POSITION 1 TOOL TAPER HSK C63 TOOL DIAMETER MM 120 TOOL LENGTH MM 120 SPINDLE ROTATION SPEED RPM 3.000 POWER REQUIREMENT AT 40% / 100% DUTY CYCLE KW 47 / 31 TORQUE AT 40% / 100% DUTY CYCLE NM 150 / 100 TRAVEL – X-AXIS MM 143 / -192 TRAVEL – Z-AXIS MM 715 RAPID MOTION – X-AXIS M/MIN 30 RAPID MOTION – Z-AXIS M/MIN 40 NC-MACHINE VICE – TRACK 2 W1 – VERTICAL STROKE MAX. MM 445 DISTANCE MACHINE VICE – ON TOP / AT THE BOTTOM MM 915 GRIPPER STROKE / GRIPPING JAW MM 15 CLAMPING FORCE KN 24 12-POSITION DISC TURRET HEAD – A2 – TRACK 3 STATIC TOOLS POSITIONS 11 WORKPIECE GRIPPER POSITION 1 SHAFT DIAMETER DIN 69880 – VDI MM 40 SPINDLE ROTATION SPEED MAX. RPM 6.000 NOMINAL SPEED RPM 3.000 TORQUE AT 10% DUTY CYCLE NM / KW 40 / 13,5 TORQUE AT 25% DUTY CYCLE NM / KW 30 / 9,0 TORQUE AT 100% DUTY CYCLE NM / KW 15 / 4,5 TRAVEL – X-AXIS MM 150 / -150 TRAVEL – Z-AXIS MM 735 RAPID MOTION – X-AXIS M/MIN 30 RAPID MOTION – Z-AXIS M/MIN 40 MAINSPINDLE – HEADSTOCK ON TOP WITH MOTOR SPINDLE – TRACK 4 SPINDLE HEAD DIN 55026-A GRößE 6 SPINDLE DIAMETER IN FRONT BEARING MM 110 SPINDLE ROTATION SPEED MAX. U/MIN 5.000 POWER REQUIREMENT AT 40% / 100% DUTY CYCLE KW 38 / 29 TORQUE AT 40% / 100% DUTY CYCLE NM 250 / 200 HEADSTOCK – W2 VERTICAL STROKE MAX. MM 420 SELF-CENTERING NC-STEADY REST – VERTICAL STROKE MM 420 SELF-CENTERING NC-STEADY REST – HORIZONTAL STROKE MM 190 TAILSTOCK – FIXED 12-POSITION DISC TURRET HEAD – A3 – TRACK 5 DRIVEN TOOLS POSITIONS 11 WORKPIECE GRIPPER POSITION 1 SHAFT DIAMETER DIN 69880 – VDI MM 40 SPINDLE ROTATION SPEED MAX. RPM 6.000 NOMINAL SPEED RPM 3.000 TORQUE AT 10% DUTY CYCLE NM / KW 40 / 13,5 TORQUE AT 25% DUTY CYCLE NM / KW 30 / 9,0 TORQUE AT 100% DUTY CYCLE NM / KW 15 / 4,5 TRAVEL – X-AXIS MM 150 / -150 TRAVEL – Z-AXIS MM 735 RAPID MOTION – X-AXIS M/MIN 30 RAPID MOTION – Z-AXIS M/MIN 40 ELECTRICS ELECTRICS – VOLTAGE / FREQUENCY V/HZ 400 / 50 CONNECTED LOAD KW 70 MACHINE DIMENSION AND WEIGHT MACHINE WEIGHT APPROX. KGS 23.000 DIMENSION OF THE MACHINE MM 6.800 X 4.300 HEIGHT OF THE MACHINE MM 4.000 ACCESSORIES AND FURTHER INFORMATION: CNC-CONTROL SYSTEM SIEMENS 840D TFT-COLOUR DISPLAY SAVETY INTEGRATED WORKPIECE STORAGE AND TRANSPORT SYSTEM 3 UNIT WORKPIECE GRIPPER: WORKPIECE WEIGHT MAX. 20 KG CLAMPING DIAMETER 75 MM CLAMPING FORCE 2,4 KN OVAL CONVEYOR SYSTEM WITH PALLETS FOR STORING RAW PARTS, STORAGE CAPACITY FOR 34 RAW PARTS AUTOMATIC LOADING WITH WORKPIECE GRIPPER IN DISC TURRET HEAD A1 WORKPIECE DIAMETER MAX. 140 MM WORKPIECE HEIGHT MAX. 630 MM OVAL CONVEYOR SYSTEM WITH PALLETS FOR STORING MACHINED WORKPIECES, STORAGE CAPACITY FOR 17 WORKPIECES, WORKPIECE DIAMETER MAX. 140 MM WORKPIECE HEIGHT MAX. 630 MM 1 SELF CENTERING STEADY REST, MOVABLE – THE AXIS MOVEMENTS ARE NC-CONTROLLED WORKPIECE DIAMETER 8 – 90 MM DOUBLEPRESSURE, 2 CLAMPING PRESSURES CAN BE ADJUSTED, IN THE PART PROGRAM, THESE ARE PICKED UP VIA M FUNCTION IF REQUIRED 3-JAW SHAFT POWER CHUCK, Ø 210 MM, MAX. 3.500 RPM, MANUFACTURER ROEHM, (TRACK 4) COOLANT ATTACHMENT WITH PAPER BELT FILTER SYSTEM, COOLANT TANK APPROX.. 1.200 L, SUPPLY HIGH-LOW PRESSURE 30 BAR AT 40L/MIN – 8 BAR AT 80 L/MIN, COOLANT FILTRATION 50 µM, PAPER BELT FILTER, PAPER WIDTH 710 MM, FILTER FINENESS 30 µM CHIP CONVEYOR - HINGED BELT CONVEYOR, DISCHARGE HEIGHT 1.250 MM DUST- AND OIL MIST EXHAUSTER, AIR VOLUME 1.600 CBM/H
Vendedor: HBN Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-vibro feeder /tablet deduster (1x), make pharma technology sa/nv nivelles belgium, type dv-1300, no 0706163, new 2007, material stainless steel , mirror polished, feeder length 1300mm, inlet 120x80mm, outlet dia. 50mm, with motor 230 volt, without controls, mounted on wheels, floorspace 0,9x0,8 m, total height 2,0 mvibro feedersconveyor screws > vibro feeders VIBRO FEEDER /TABLET DEDUSTER (1X), MAKE PHARMA TECHNOLOGY SA/NV NIVELLES BELGIUM, TYPE DV-1300, NO 0706163, NEW 2007, MATERIAL STAINLESS STEEL , MIRROR POLISHED, FEEDER LENGTH 1300MM, INLET 120X80MM, OUTLET DIA. 50MM, WITH MOTOR 230 VOLT, WITHOUT CONTROLS, MOUNTED ON WHEELS, FLOORSPACE 0,9X0,8 M, TOTAL HEIGHT 2,0 MVIBRO FEEDERSCONVEYOR SCREWS > VIBRO FEEDERS
Vendedor: Foeth
Año de construcción: usado
Precio: 2.500 £
Ubicación: Land-8 spindle automatic ras winder, auto doff, 6 inch traverse 4 degree 20, 5 pocket magazine, splicers, waxing, parallel drum, 415 volts ,50 hz, conveyor up middle for empty tubes. uster d4 clearers. 8 SPINDLE AUTOMATIC RAS WINDER, AUTO DOFF, 6 INCH TRAVERSE 4 DEGREE 20, 5 POCKET MAGAZINE, SPLICERS, WAXING, PARALLEL DRUM, 415 VOLTS ,50 HZ, CONVEYOR UP MIDDLE FOR EMPTY TUBES. USTER D4 CLEARERS.
Vendedor: Petros Textiles (1969) LTD
Año de construcción: usado
Ubicación: Land-shredder, make kusters venlo, no 60195/2, new 2006, double shaft, material stainless steel (hopper + breaker), with hopper, inlet 600x400x240mm, outlet 150x150mm, motor 1 kw, 3x 400 volt, mounted on legs, with switchgear, floorspace 1.5x0.9m, total height 2.1m, weight 600kg, extra specifications <br>shreddersbreakers > shredders SHREDDER, MAKE KUSTERS VENLO, NO 60195/2, NEW 2006, DOUBLE SHAFT, MATERIAL STAINLESS STEEL (HOPPER + BREAKER), WITH HOPPER, INLET 600X400X240MM, OUTLET 150X150MM, MOTOR 1 KW, 3X 400 VOLT, MOUNTED ON LEGS, WITH SWITCHGEAR, FLOORSPACE 1.5X0.9M, TOTAL HEIGHT 2.1M, WEIGHT 600KG, EXTRA SPECIFICATIONS
SHREDDERSBREAKERS > SHREDDERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-smi flexi sm300 trbf cardboard sleeve multipacker, year 2014

packing medium options:
cardboard sleeves with flap
stacked packs
pack with handle
cardboard sleeves – over the top (ott)
cardboard sleeves – neck through (nt)

formats packed (cluster ott, simple folding):
classic cans: 330ml (2×3), 500ml (2×2, 2×3) – output 166-170 packs/min
sleek cans: 330ml (2×3), 335ml (2×3) – output 166 packs/min
slim cans: 200ml (2×2, 2×3), 250ml (2×2, 2×3) – output 166-170 packs/min

additional formats:
classic cans: 330ml (2×2) – output 170 packs/min
sleek cans: 330ml (2×2), 355ml (2×2) – output 170 packs/min
slim cans: 150ml (2×3) – output 166 packs/min

machine is in excellent condition and is immediately available. it was recently disconnected.
 SMI FLEXI SM300 TRBF CARDBOARD SLEEVE MULTIPACKER, YEAR 2014 PACKING MEDIUM OPTIONS: CARDBOARD SLEEVES WITH FLAP STACKED PACKS PACK WITH HANDLE CARDBOARD SLEEVES – OVER THE TOP (OTT) CARDBOARD SLEEVES – NECK THROUGH (NT) FORMATS PACKED (CLUSTER OTT, SIMPLE FOLDING): CLASSIC CANS: 330ML (2×3), 500ML (2×2, 2×3) – OUTPUT 166-170 PACKS/MIN SLEEK CANS: 330ML (2×3), 335ML (2×3) – OUTPUT 166 PACKS/MIN SLIM CANS: 200ML (2×2, 2×3), 250ML (2×2, 2×3) – OUTPUT 166-170 PACKS/MIN ADDITIONAL FORMATS: CLASSIC CANS: 330ML (2×2) – OUTPUT 170 PACKS/MIN SLEEK CANS: 330ML (2×2), 355ML (2×2) – OUTPUT 170 PACKS/MIN SLIM CANS: 150ML (2×3) – OUTPUT 166 PACKS/MIN MACHINE IS IN EXCELLENT CONDITION AND IS IMMEDIATELY AVAILABLE. IT WAS RECENTLY DISCONNECTED.
Vendedor: IPR-PETMachinery
Año de construcción: usado
Ubicación: Land-shredder, make kusters venlo, no 60195/3, new 2006, double shaft, material stainless steel (hopper + breaker), with hopper, inlet 600x400x240mm, outlet 150x150mm, motor 1 kw 3x 400 volt, mounted on legs, with switchgear, floorspace 1,5x0,9m, total height 2,1m, weight 600kgshreddersbreakers > shredders SHREDDER, MAKE KUSTERS VENLO, NO 60195/3, NEW 2006, DOUBLE SHAFT, MATERIAL STAINLESS STEEL (HOPPER + BREAKER), WITH HOPPER, INLET 600X400X240MM, OUTLET 150X150MM, MOTOR 1 KW 3X 400 VOLT, MOUNTED ON LEGS, WITH SWITCHGEAR, FLOORSPACE 1,5X0,9M, TOTAL HEIGHT 2,1M, WEIGHT 600KGSHREDDERSBREAKERS > SHREDDERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-smi wp 800 wraparound case packer, 2014

packing formats: wraparound carton box, tray & cluster in tray

formats packed:
– loose cans in wraparound carton:
classic cans: 500ml (4×6) – output 41 packs/min.
sleek cans: 330ml (4×6) – output 41 packs/min.
slim cans: 250ml (4×6) – output 41 packs/min.

– loose cans in presentation pack:
classic cans: 500ml (2×4) – output 70 packs/min.

– tray & cluster in tray:
classic cans: 330ml & 500ml – (4x(2×3) – two-gated – output 41 packs/min
sleek cans: 330ml (4x(2×3) – two-gated – output 41 packs/min
slim cans: 250ml (4x(2×3) – two-gated – output 41 packs/min

many more future formats possible, further information can be sent upon interest.

machine in excellent condition and immediately available. it was recently disconnected.
 SMI WP 800 WRAPAROUND CASE PACKER, 2014 PACKING FORMATS: WRAPAROUND CARTON BOX, TRAY & CLUSTER IN TRAY FORMATS PACKED: – LOOSE CANS IN WRAPAROUND CARTON: CLASSIC CANS: 500ML (4×6) – OUTPUT 41 PACKS/MIN. SLEEK CANS: 330ML (4×6) – OUTPUT 41 PACKS/MIN. SLIM CANS: 250ML (4×6) – OUTPUT 41 PACKS/MIN. – LOOSE CANS IN PRESENTATION PACK: CLASSIC CANS: 500ML (2×4) – OUTPUT 70 PACKS/MIN. – TRAY & CLUSTER IN TRAY: CLASSIC CANS: 330ML & 500ML – (4X(2×3) – TWO-GATED – OUTPUT 41 PACKS/MIN SLEEK CANS: 330ML (4X(2×3) – TWO-GATED – OUTPUT 41 PACKS/MIN SLIM CANS: 250ML (4X(2×3) – TWO-GATED – OUTPUT 41 PACKS/MIN MANY MORE FUTURE FORMATS POSSIBLE, FURTHER INFORMATION CAN BE SENT UPON INTEREST. MACHINE IN EXCELLENT CONDITION AND IMMEDIATELY AVAILABLE. IT WAS RECENTLY DISCONNECTED.
Vendedor: IPR-PETMachinery
Año de construcción: usado
Ubicación: Land-shredder, make kusters venlo, no 60193/6, new 2006, double shaft, material stainless steel (hopper + breaker), with hopper, inlet 600x400x240mm, outlet 150x150mm, motor 1 kw 3x 400 volt, mounted on legs, with switchgear, floorspace 1,5x0,9m, total height 2,1m, weight 600kgshreddersbreakers > shredders SHREDDER, MAKE KUSTERS VENLO, NO 60193/6, NEW 2006, DOUBLE SHAFT, MATERIAL STAINLESS STEEL (HOPPER + BREAKER), WITH HOPPER, INLET 600X400X240MM, OUTLET 150X150MM, MOTOR 1 KW 3X 400 VOLT, MOUNTED ON LEGS, WITH SWITCHGEAR, FLOORSPACE 1,5X0,9M, TOTAL HEIGHT 2,1M, WEIGHT 600KGSHREDDERSBREAKERS > SHREDDERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-fiamma forni biscuit line

hard & soft biscuit line.

- yom 1996 but complete rebuilt in 2010 .
- 1000 mm working width.
- for all kind of biscuits, also filled and wire cut biscuits

consisting of:

- part 1: sugar mill plant
- with cristall sugar tank in inox and integraded
double scew conveyor
- double screw conveyor connected with
sugar mill for powder sugar
- connected with powder sugar cyclon tank and
dust extraction
- connected with suction station on the plattform
over the mixer
- with plattform for operating the system
- with control panel
- complete in stainless steel

part 2:  fat dosing station 200 l
- with fat melting tank doubel wall with closed
water heating system
- dosing pipe double wall for heating with warm water
- water heating station with circulation pump for
melting tank and pipes
-  in stainless steel
- electric control box
part 3:  liquid flavour station
- with flavour tank
- with pump
- with pipes, valves and connected  with control panel
- in stainless steel

part 4:  mixer station
- hsm 300 mixer with automatic emptying.
above the mixer is a dispensing system for flour and powder sugar
and the suction conveyor turbine for flour and sugar (height 5.2 m)
the liquid fat and flavour comes volumetric controlled over pumps, with sps
control.
- mixer bowl in stainless steel
- double z kneader arms in stainless steel
- double wall mixer bowl for heating and cooling
- capacity:  300 kg per batch
- with control panel
part 5: dough cutting and shredder station
- transport belt for dough
- cutting device
- shredder device
- with control panel
part 6: dough transport belt to the vertical laminator
- working width:  1000 mm
- pu - belt  colour white
- variable belt speed over inverter
- connected with control panel
part 7: dough transport belt to the rotary moulder
- working width:  1000 mm
- pu - belt colour white
- variable belt speed over inverter
- connected with control panel
part 8: vertical laminator
- working width: 1000 mm
- variable dough belt speed
- variable dough thickness
- variable drum speed
with dough hopper and level control
part 9: rolling mill
with 3 drums for laminated dough
- working width:  1000 mm
- variable thickness
- variable drum speed
- stainless steel
part 10: rolling mill
with 3 drums for laminated dough
- working width:  1000 mm
- variable thickness
- variable drum speed
- stainless steel
part 11:  dough transport
- working width:  1000 mm
- pu - belt colour white
- variable belt speed over inverter
- connected with control panel
part 12: dough re-transport to the hopper
- working width: 300 mm
- pu- belt colour white
- variable belt speed
- connected with control panel
part 13: rotary moulder
- working width 1000 mm
- variable speed
- stainless steel frame
part 14: cutting device
- vertical cutting station
- cutting impuls variable
- stainless steel frame
- connected with control panel
part 15: fiamma forni oven
- working width:        1000 mm
- baking length:      24000 mm
- complete length: 30000 mm
- solid steel belt from sandvik
- yom:   1996, overhauld in 2010
with 2 gaz burners
-  indirect heating system
-  power gas burner i - ii grade 81 kw - 232 kw degree
with belt cleaning device
belt tension station and automatic belt control
part 15:  cooling belt
-  yom:   2013
-  working width:  1000 mm
-  pu- belt colour white
-  cooling length:  ca. 30 m , 8 floors
-  sandwich panel cooling box
-  incl. cooling fan
also included:
a 8 row encrusting machine
for filled cookie. the encruster can integrated in
a short time. you can change the rotary moulder
and in the same place you put in the encruster.
for change it is integradet a justagen device.
complete length:    70 m
complete width:      2.8 m
complete high:        2.4 m
there is also needed place for:
fat container
syrup container
mixer for baking additives
platform for sugar application, under which the a grinder is placed
outside, two flour silos with capacity of 32 t each ( option )
the demand for electric power - 95 kw
power gas burner i - ii grade 81 kw - 232 kw degree
- line capacity:
biscuits: 3000 - 3200 kg / 8 h,
crunch cokies: 2500 - 2800 kg / 8 h
sprinkling sugar element
glazur machine
chimneys to the furnace
water heating device (heat recovery system)
hoods over the transporters remove the heat (3 pieces)
abcs://abc.dropbox.com/sh/joiqt0hf6kb69lb/aacq-zar1c4hl_mfzglecmcva?dl=0
video of youtube: abcs://youtu.be/ilymxnusxyq 
 FIAMMA FORNI BISCUIT LINE HARD & SOFT BISCUIT LINE. - YOM 1996 BUT COMPLETE REBUILT IN 2010 . - 1000 MM WORKING WIDTH. - FOR ALL KIND OF BISCUITS, ALSO FILLED AND WIRE CUT BISCUITS CONSISTING OF: - PART 1: SUGAR MILL PLANT - WITH CRISTALL SUGAR TANK IN INOX AND INTEGRADED DOUBLE SCEW CONVEYOR - DOUBLE SCREW CONVEYOR CONNECTED WITH SUGAR MILL FOR POWDER SUGAR - CONNECTED WITH POWDER SUGAR CYCLON TANK AND DUST EXTRACTION - CONNECTED WITH SUCTION STATION ON THE PLATTFORM OVER THE MIXER - WITH PLATTFORM FOR OPERATING THE SYSTEM - WITH CONTROL PANEL - COMPLETE IN STAINLESS STEEL PART 2: FAT DOSING STATION 200 L - WITH FAT MELTING TANK DOUBEL WALL WITH CLOSED WATER HEATING SYSTEM - DOSING PIPE DOUBLE WALL FOR HEATING WITH WARM WATER - WATER HEATING STATION WITH CIRCULATION PUMP FOR MELTING TANK AND PIPES - IN STAINLESS STEEL - ELECTRIC CONTROL BOX PART 3: LIQUID FLAVOUR STATION - WITH FLAVOUR TANK - WITH PUMP - WITH PIPES, VALVES AND CONNECTED WITH CONTROL PANEL - IN STAINLESS STEEL PART 4: MIXER STATION - HSM 300 MIXER WITH AUTOMATIC EMPTYING. ABOVE THE MIXER IS A DISPENSING SYSTEM FOR FLOUR AND POWDER SUGAR AND THE SUCTION CONVEYOR TURBINE FOR FLOUR AND SUGAR (HEIGHT 5.2 M) THE LIQUID FAT AND FLAVOUR COMES VOLUMETRIC CONTROLLED OVER PUMPS, WITH SPS CONTROL. - MIXER BOWL IN STAINLESS STEEL - DOUBLE Z KNEADER ARMS IN STAINLESS STEEL - DOUBLE WALL MIXER BOWL FOR HEATING AND COOLING - CAPACITY: 300 KG PER BATCH - WITH CONTROL PANEL PART 5: DOUGH CUTTING AND SHREDDER STATION - TRANSPORT BELT FOR DOUGH - CUTTING DEVICE - SHREDDER DEVICE - WITH CONTROL PANEL PART 6: DOUGH TRANSPORT BELT TO THE VERTICAL LAMINATOR - WORKING WIDTH: 1000 MM - PU - BELT COLOUR WHITE - VARIABLE BELT SPEED OVER INVERTER - CONNECTED WITH CONTROL PANEL PART 7: DOUGH TRANSPORT BELT TO THE ROTARY MOULDER - WORKING WIDTH: 1000 MM - PU - BELT COLOUR WHITE - VARIABLE BELT SPEED OVER INVERTER - CONNECTED WITH CONTROL PANEL PART 8: VERTICAL LAMINATOR - WORKING WIDTH: 1000 MM - VARIABLE DOUGH BELT SPEED - VARIABLE DOUGH THICKNESS - VARIABLE DRUM SPEED WITH DOUGH HOPPER AND LEVEL CONTROL PART 9: ROLLING MILL WITH 3 DRUMS FOR LAMINATED DOUGH - WORKING WIDTH: 1000 MM - VARIABLE THICKNESS - VARIABLE DRUM SPEED - STAINLESS STEEL PART 10: ROLLING MILL WITH 3 DRUMS FOR LAMINATED DOUGH - WORKING WIDTH: 1000 MM - VARIABLE THICKNESS - VARIABLE DRUM SPEED - STAINLESS STEEL PART 11: DOUGH TRANSPORT - WORKING WIDTH: 1000 MM - PU - BELT COLOUR WHITE - VARIABLE BELT SPEED OVER INVERTER - CONNECTED WITH CONTROL PANEL PART 12: DOUGH RE-TRANSPORT TO THE HOPPER - WORKING WIDTH: 300 MM - PU- BELT COLOUR WHITE - VARIABLE BELT SPEED - CONNECTED WITH CONTROL PANEL PART 13: ROTARY MOULDER - WORKING WIDTH 1000 MM - VARIABLE SPEED - STAINLESS STEEL FRAME PART 14: CUTTING DEVICE - VERTICAL CUTTING STATION - CUTTING IMPULS VARIABLE - STAINLESS STEEL FRAME - CONNECTED WITH CONTROL PANEL PART 15: FIAMMA FORNI OVEN - WORKING WIDTH: 1000 MM - BAKING LENGTH: 24000 MM - COMPLETE LENGTH: 30000 MM - SOLID STEEL BELT FROM SANDVIK - YOM: 1996, OVERHAULD IN 2010 WITH 2 GAZ BURNERS - INDIRECT HEATING SYSTEM - POWER GAS BURNER I - II GRADE 81 KW - 232 KW DEGREE WITH BELT CLEANING DEVICE BELT TENSION STATION AND AUTOMATIC BELT CONTROL PART 15: COOLING BELT - YOM: 2013 - WORKING WIDTH: 1000 MM - PU- BELT COLOUR WHITE - COOLING LENGTH: CA. 30 M , 8 FLOORS - SANDWICH PANEL COOLING BOX - INCL. COOLING FAN ALSO INCLUDED: A 8 ROW ENCRUSTING MACHINE FOR FILLED COOKIE. THE ENCRUSTER CAN INTEGRATED IN A SHORT TIME. YOU CAN CHANGE THE ROTARY MOULDER AND IN THE SAME PLACE YOU PUT IN THE ENCRUSTER. FOR CHANGE IT IS INTEGRADET A JUSTAGEN DEVICE. COMPLETE LENGTH: 70 M COMPLETE WIDTH: 2.8 M COMPLETE HIGH: 2.4 M THERE IS ALSO NEEDED PLACE FOR: FAT CONTAINER SYRUP CONTAINER MIXER FOR BAKING ADDITIVES PLATFORM FOR SUGAR APPLICATION, UNDER WHICH THE A GRINDER IS PLACED OUTSIDE, TWO FLOUR SILOS WITH CAPACITY OF 32 T EACH ( OPTION ) THE DEMAND FOR ELECTRIC POWER - 95 KW POWER GAS BURNER I - II GRADE 81 KW - 232 KW DEGREE - LINE CAPACITY: BISCUITS: 3000 - 3200 KG / 8 H, CRUNCH COKIES: 2500 - 2800 KG / 8 H SPRINKLING SUGAR ELEMENT GLAZUR MACHINE CHIMNEYS TO THE FURNACE WATER HEATING DEVICE (HEAT RECOVERY SYSTEM) HOODS OVER THE TRANSPORTERS REMOVE THE HEAT (3 PIECES) ABCS://ABC.DROPBOX.COM/SH/JOIQT0HF6KB69LB/AACQ-ZAR1C4HL_MFZGLECMCVA?DL=0 VIDEO OF YOUTUBE: ABCS://YOUTU.BE/ILYMXNUSXYQ
Vendedor: bak-tec-Industries GmbH
Año de construcción: usado
Ubicación: Land-shredder, make kusters venlo, no 60193/1, new 2006, double shaft, material stainless steel (hopper + breaker), with hopper, inlet 600x400x240mm, outlet 150x150mm, motor 1 kw, 3x 400 volt, mounted on legs, with switchgear, floorspace 1,5x0,9m, total height 2,1m, weight 600kg, extra specifications <br>shreddersbreakers > shredders SHREDDER, MAKE KUSTERS VENLO, NO 60193/1, NEW 2006, DOUBLE SHAFT, MATERIAL STAINLESS STEEL (HOPPER + BREAKER), WITH HOPPER, INLET 600X400X240MM, OUTLET 150X150MM, MOTOR 1 KW, 3X 400 VOLT, MOUNTED ON LEGS, WITH SWITCHGEAR, FLOORSPACE 1,5X0,9M, TOTAL HEIGHT 2,1M, WEIGHT 600KG, EXTRA SPECIFICATIONS
SHREDDERSBREAKERS > SHREDDERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-manufacturer: dima (italy)
type: double-o cheese vats
volume: 15,000 l
heating of vats with hot water
cheese curd pump
water heating unit
milk pre-heating unit with milk meter
balance tank for whey with pump
valve cluster
work platform
plc: siemens s7
dimensions: 4000 mm (l) x 3000 mm (w) x 3300 mm (h)
available: 2 pcs.    MANUFACTURER: DIMA (ITALY) TYPE: DOUBLE-O CHEESE VATS VOLUME: 15,000 L HEATING OF VATS WITH HOT WATER CHEESE CURD PUMP WATER HEATING UNIT MILK PRE-HEATING UNIT WITH MILK METER BALANCE TANK FOR WHEY WITH PUMP VALVE CLUSTER WORK PLATFORM PLC: SIEMENS S7 DIMENSIONS: 4000 MM (L) X 3000 MM (W) X 3300 MM (H) AVAILABLE: 2 PCS.
Vendedor: M&E TRADING WEIDNER e.K.
Año de construcción: usado
Ubicación: Land-shredder, make kusters venlo, no 60193/2, new 2006, double shaft, material stainless steel (hopper + breaker), with hopper, inlet 600x400x240mm, outlet 150x150mm, motor 1 kw 3x 400 volt, mounted on legs, with switchgear, floorspace 1,5x0,9m, total height 2,1m, weight 600kgshreddersbreakers > shredders SHREDDER, MAKE KUSTERS VENLO, NO 60193/2, NEW 2006, DOUBLE SHAFT, MATERIAL STAINLESS STEEL (HOPPER + BREAKER), WITH HOPPER, INLET 600X400X240MM, OUTLET 150X150MM, MOTOR 1 KW 3X 400 VOLT, MOUNTED ON LEGS, WITH SWITCHGEAR, FLOORSPACE 1,5X0,9M, TOTAL HEIGHT 2,1M, WEIGHT 600KGSHREDDERSBREAKERS > SHREDDERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-fritsch dough lamination line with pastry xl line & ctr

for alle puff pastrys & croissants

for filled pastrys & filled croissants

also for molding  & stamped products

performance: approx 1000 kg/h depending on the product

performance croissant: approx 3000 pieces/h

consisting of:

- infeed belt in extruder with flour duster
- dough belt extruder with integrated fat folding 
- fat pump
- 3 x satelite units
- 2 x dough folding units
- 1 x gross roller 
- 1 x kalibration unit
- various flour duster
- flour dough recirculation
- puff pastry line xl with cutting unit, filling station, guillotine, 2 rollers, and various folding shoes
- many parts, rollers, cutting rollers, punch units etc.
- discharge conveyor
- 1 roller für filled croissant
- 1 roller for unfilled croissant
- control panel
- control desk with computer control
- line was reconditioned by fritsch in 2017
- option: new fritsch control as a reserve by request

inspection with product run possible by request. 
dismantling, transport, packaging also complete set up by request. 

pictures & videos & layout for downlaod:  FRITSCH DOUGH LAMINATION LINE WITH PASTRY XL LINE & CTR FOR ALLE PUFF PASTRYS & CROISSANTS FOR FILLED PASTRYS & FILLED CROISSANTS ALSO FOR MOLDING & STAMPED PRODUCTS PERFORMANCE: APPROX 1000 KG/H DEPENDING ON THE PRODUCT PERFORMANCE CROISSANT: APPROX 3000 PIECES/H CONSISTING OF: - INFEED BELT IN EXTRUDER WITH FLOUR DUSTER - DOUGH BELT EXTRUDER WITH INTEGRATED FAT FOLDING - FAT PUMP - 3 X SATELITE UNITS - 2 X DOUGH FOLDING UNITS - 1 X GROSS ROLLER - 1 X KALIBRATION UNIT - VARIOUS FLOUR DUSTER - FLOUR DOUGH RECIRCULATION - PUFF PASTRY LINE XL WITH CUTTING UNIT, FILLING STATION, GUILLOTINE, 2 ROLLERS, AND VARIOUS FOLDING SHOES - MANY PARTS, ROLLERS, CUTTING ROLLERS, PUNCH UNITS ETC. - DISCHARGE CONVEYOR - 1 ROLLER FüR FILLED CROISSANT - 1 ROLLER FOR UNFILLED CROISSANT - CONTROL PANEL - CONTROL DESK WITH COMPUTER CONTROL - LINE WAS RECONDITIONED BY FRITSCH IN 2017 - OPTION: NEW FRITSCH CONTROL AS A RESERVE BY REQUEST INSPECTION WITH PRODUCT RUN POSSIBLE BY REQUEST. DISMANTLING, TRANSPORT, PACKAGING ALSO COMPLETE SET UP BY REQUEST. PICTURES & VIDEOS & LAYOUT FOR DOWNLAOD:
Vendedor: bak-tec-Industries GmbH
Año de construcción: usado
Ubicación: Land-shredder, make kusters venlo, no 60193/3, new 2006, double shaft, material stainless steel (hopper + breaker), with hopper, inlet 600x400x240mm, outlet 150x150mm, motor 1 kw 3x 400 volt, mounted on legs, with switchgear, floorspace 1.5x0.9m, total height 2.1m, weight 600kgshreddersbreakers > shredders SHREDDER, MAKE KUSTERS VENLO, NO 60193/3, NEW 2006, DOUBLE SHAFT, MATERIAL STAINLESS STEEL (HOPPER + BREAKER), WITH HOPPER, INLET 600X400X240MM, OUTLET 150X150MM, MOTOR 1 KW 3X 400 VOLT, MOUNTED ON LEGS, WITH SWITCHGEAR, FLOORSPACE 1.5X0.9M, TOTAL HEIGHT 2.1M, WEIGHT 600KGSHREDDERSBREAKERS > SHREDDERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-kusters thermo-bonding calender type 412.40, year 1994

roller width 2700 mm

2 bowls, both oil heated

top bowl: embossed 

bottom bowl: steel 

pressure 40 tn

two cylinders at the entrance for fabric preheating 

this machine was working in the factory spontex in spain.
at the moment it is in our warehouse being revised and refurbished. KUSTERS THERMO-BONDING CALENDER TYPE 412.40, YEAR 1994 ROLLER WIDTH 2700 MM 2 BOWLS, BOTH OIL HEATED TOP BOWL: EMBOSSED BOTTOM BOWL: STEEL PRESSURE 40 TN TWO CYLINDERS AT THE ENTRANCE FOR FABRIC PREHEATING THIS MACHINE WAS WORKING IN THE FACTORY SPONTEX IN SPAIN. AT THE MOMENT IT IS IN OUR WAREHOUSE BEING REVISED AND REFURBISHED.
Vendedor: Inautex
Año de construcción: usado
Ubicación: Land-shredder, make kusters venlo, no 60193/7, new 2006, double shaft, material stainless steel (hopper + breaker), with hopper, inlet, outlet, motor, mounted on legs, with switchgear, floorspace 1,5 x 0,9m, total height 2,1m, weight 600kgshreddersbreakers > shredders SHREDDER, MAKE KUSTERS VENLO, NO 60193/7, NEW 2006, DOUBLE SHAFT, MATERIAL STAINLESS STEEL (HOPPER + BREAKER), WITH HOPPER, INLET, OUTLET, MOTOR, MOUNTED ON LEGS, WITH SWITCHGEAR, FLOORSPACE 1,5 X 0,9M, TOTAL HEIGHT 2,1M, WEIGHT 600KGSHREDDERSBREAKERS > SHREDDERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-laser cutting machine stx612 mkii 4.0kw 
refurbished, mazak lasercutting machine with 4000w 
table size: 4000mm x 2000mm 
chip conveyor 
full covered machine table 
fe: 22mm 
va: 15mm 
almg: 10mm
plastics possible to cut 
incl. software 
incl. exhauster
option: warranty, setup, training, 
 LASER CUTTING MACHINE STX612 MKII 4.0KW REFURBISHED, MAZAK LASERCUTTING MACHINE WITH 4000W TABLE SIZE: 4000MM X 2000MM CHIP CONVEYOR FULL COVERED MACHINE TABLE FE: 22MM VA: 15MM ALMG: 10MM PLASTICS POSSIBLE TO CUT INCL. SOFTWARE INCL. EXHAUSTER OPTION: WARRANTY, SETUP, TRAINING,
Vendedor: H+S Maschinentechnik GmbH
Año de construcción: usado
Ubicación: Land-shredder, make kusters venlo, no 60193/5, new 2006, double shaft, material stainless steel (hopper + breaker), with hopper, inlet, outlet, motor, mounted on legs, with switchgear, floorspace 1,5x0,9m, total height 2,1m, weight 600kg,shreddersbreakers > shredders SHREDDER, MAKE KUSTERS VENLO, NO 60193/5, NEW 2006, DOUBLE SHAFT, MATERIAL STAINLESS STEEL (HOPPER + BREAKER), WITH HOPPER, INLET, OUTLET, MOTOR, MOUNTED ON LEGS, WITH SWITCHGEAR, FLOORSPACE 1,5X0,9M, TOTAL HEIGHT 2,1M, WEIGHT 600KG,SHREDDERSBREAKERS > SHREDDERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-krämer c810 tablet deduster, suitable for tablets 5-25 mm diameter. KRäMER C810 TABLET DEDUSTER, SUITABLE FOR TABLETS 5-25 MM DIAMETER.
Vendedor: Hauser Maschinen e.K.
Año de construcción: usado
Ubicación: Land-shredder, make kusters venlo, no 60193/4, new 2006, double shaft, material stainless steel (hopper + breaker), with hopper, inlet, motor, mounted on legs, with switchgear, floorspace 1,5 x 0,9m, total height 2,1m, weight 600kgshreddersbreakers > shredders SHREDDER, MAKE KUSTERS VENLO, NO 60193/4, NEW 2006, DOUBLE SHAFT, MATERIAL STAINLESS STEEL (HOPPER + BREAKER), WITH HOPPER, INLET, MOTOR, MOUNTED ON LEGS, WITH SWITCHGEAR, FLOORSPACE 1,5 X 0,9M, TOTAL HEIGHT 2,1M, WEIGHT 600KGSHREDDERSBREAKERS > SHREDDERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-pharma technology dv1300 +vc vertical tablet/capsule deduster, output 50,000 to 2,000,000 pieces/hour. year 2010. PHARMA TECHNOLOGY DV1300 +VC VERTICAL TABLET/CAPSULE DEDUSTER, OUTPUT 50,000 TO 2,000,000 PIECES/HOUR. YEAR 2010.
Vendedor: Hauser Maschinen e.K.
Año de construcción: usado
Ubicación: Land-shredder, make kusters venlo, no 60186/2, new 2006, double shaft, material stainless steel (hopper + breaker), with hopper, inlet, outlet, motor, mounted on legs, with switchgear, floorspace 1,5 x 0,9m, total height 2,1m, weight 600kgshreddersbreakers > shredders SHREDDER, MAKE KUSTERS VENLO, NO 60186/2, NEW 2006, DOUBLE SHAFT, MATERIAL STAINLESS STEEL (HOPPER + BREAKER), WITH HOPPER, INLET, OUTLET, MOTOR, MOUNTED ON LEGS, WITH SWITCHGEAR, FLOORSPACE 1,5 X 0,9M, TOTAL HEIGHT 2,1M, WEIGHT 600KGSHREDDERSBREAKERS > SHREDDERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-bandwidth max.			350 mm
feed length max.			500 mm
band thickness min./max.		0.10 â?? 4.00 mm

feed force at 5 bar 1400 n
clamping force at 5 bar 4900 n

facilities:
adjuster for the infeed height; via hand wheel
screw-on plate
pressure reducer with maintenance unit
intermediate air possible
speed forward and return stroke adjustable (damping) BANDWIDTH MAX. 350 MM FEED LENGTH MAX. 500 MM BAND THICKNESS MIN./MAX. 0.10 &ACIRC;?? 4.00 MM FEED FORCE AT 5 BAR 1400 N CLAMPING FORCE AT 5 BAR 4900 N FACILITIES: ADJUSTER FOR THE INFEED HEIGHT; VIA HAND WHEEL SCREW-ON PLATE PRESSURE REDUCER WITH MAINTENANCE UNIT INTERMEDIATE AIR POSSIBLE SPEED FORWARD AND RETURN STROKE ADJUSTABLE (DAMPING)
Vendedor: Schrenk Werkzeugmaschinen
Año de construcción: usado
Precio: used machinery auction RESALE 30 €
Ubicación: Land-weight approx.: 5 kg<br/>dimensions (l x w x h) approx.: 400 x 400 x 300 mm<br/>description: - one cejn sand blasting set/ deruster<br> - three spraying tools for spray cans (cans are not included in delivery)<br> - one hand grease gun WEIGHT APPROX.: 5 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 400 X 300 MM
DESCRIPTION: - ONE CEJN SAND BLASTING SET/ DERUSTER
- THREE SPRAYING TOOLS FOR SPRAY CANS (CANS ARE NOT INCLUDED IN DELIVERY)
- ONE HAND GREASE GUN
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-new magnetic pulley for conveyor belt with stainless steel shear plate. NEW MAGNETIC PULLEY FOR CONVEYOR BELT WITH STAINLESS STEEL SHEAR PLATE.
Vendedor: HaBé Telcentra B.V.
Año de construcción: usado
Ubicación: Land-grinding diameter: 350 mm<br/>grinding length: 600 mm<br/>centre height: 175 mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>-foto of a 1000mm machine delivered with new cabinet<br/>-machine will be delivered overhauled<br/>-modern heidenhain control grindplusit<br/>-grinding wheel left 500mm diameter and right 300mm diameter<br/>-workpiecespindle with iso50<br/>-tailstock with micro adjustment<br/>-kel-pos , movomatic c25<br/>-base module for kel-touch and kel-balance<br/>-kel-touch<br/>-filtration with paper<br/>-exhauster<br/>  <br/><br/><br/><br/><br/> GRINDING DIAMETER: 350 MM
GRINDING LENGTH: 600 MM
CENTRE HEIGHT: 175 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
-FOTO OF A 1000MM MACHINE DELIVERED WITH NEW CABINET
-MACHINE WILL BE DELIVERED OVERHAULED
-MODERN HEIDENHAIN CONTROL GRINDPLUSIT
-GRINDING WHEEL LEFT 500MM DIAMETER AND RIGHT 300MM DIAMETER
-WORKPIECESPINDLE WITH ISO50
-TAILSTOCK WITH MICRO ADJUSTMENT
-KEL-POS , MOVOMATIC C25
-BASE MODULE FOR KEL-TOUCH AND KEL-BALANCE
-KEL-TOUCH
-FILTRATION WITH PAPER
-EXHAUSTER





Vendedor: BEMA
Año de construcción: usado
Ubicación: Land-condition: dismantled
heads: 14
running for: chocolate cluster
dosing range(cc): 10cc - 1500cc
dosing range(g): 10 g - 500 g
function: yes
capacity / performance: 100/min
location: germany
availability: as of now

 CONDITION: DISMANTLED HEADS: 14 RUNNING FOR: CHOCOLATE CLUSTER DOSING RANGE(CC): 10CC - 1500CC DOSING RANGE(G): 10 G - 500 G FUNCTION: YES CAPACITY / PERFORMANCE: 100/MIN LOCATION: GERMANY AVAILABILITY: AS OF NOW
Vendedor: MVRG UG (haftungsbeschränkt) & Co. KG
Año de construcción: usado
Ubicación: Land-x-travel:18000 mm<br/>y-travel:2500 mm<br/>z-travel:1250 mm<br/>spindle motor:31 kw<br/>spindle turning speed range:10 - 10000 u/min<br/>spindle taper::hsk a 80 <br/>number of tools:104 <br/>:a-achse +100/-90<br/>c-axis:+/- 200 °<br/>feeds:1 - 16000 mm/min<br/>rapid traverse::16 m/min<br/>weight of the machine ca.:72 t<br/>total power requirement:65 kw<br/>dimensions of the machine ca.:25,5 x 10,0 x 5,2 m<br/><br/>machine equiped with siemens 840 d control for 5 axis - nc 2-axis fork type milling head - balluf tool identification system - marposs measuring device - tool changer for 104 tools - hand operating panel - exhauster X-TRAVEL:18000 MM
Y-TRAVEL:2500 MM
Z-TRAVEL:1250 MM
SPINDLE MOTOR:31 KW
SPINDLE TURNING SPEED RANGE:10 - 10000 U/MIN
SPINDLE TAPER::HSK A 80
NUMBER OF TOOLS:104
:A-ACHSE +100/-90
C-AXIS:+/- 200 °
FEEDS:1 - 16000 MM/MIN
RAPID TRAVERSE::16 M/MIN
WEIGHT OF THE MACHINE CA.:72 T
TOTAL POWER REQUIREMENT:65 KW
DIMENSIONS OF THE MACHINE CA.:25,5 X 10,0 X 5,2 M

MACHINE EQUIPED WITH SIEMENS 840 D CONTROL FOR 5 AXIS - NC 2-AXIS FORK TYPE MILLING HEAD - BALLUF TOOL IDENTIFICATION SYSTEM - MARPOSS MEASURING DEVICE - TOOL CHANGER FOR 104 TOOLS - HAND OPERATING PANEL - EXHAUSTER
Vendedor: Schiess-Moweg GmbH
Año de construcción: usado
Ubicación: Land-jogger schuster rw<br/>  <br/>  year ca. 1992<br/>  size 900 x 1150mm<br/>  mobile, tiltable<br/>  height adjustable<br/>  <br/>  -available immediately -<br/>  -can be inspect-<br/>  -on stock - can be test- JOGGER SCHUSTER RW

YEAR CA. 1992
SIZE 900 X 1150MM
MOBILE, TILTABLE
HEIGHT ADJUSTABLE

-AVAILABLE IMMEDIATELY -
-CAN BE INSPECT-
-ON STOCK - CAN BE TEST-
Vendedor: F1-TRADE GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: cefla, type: spaybotic, year: 2003, control: cefla, spraying line: yes, work piece width min-max mm: 1400, min.-max. workpiece length in mm: 150-4500, min.-max. workpiece height in mm: 10-100, working widht max mm: 1400, spraying machine: 1, spraying heads - total: 4, farbmanagment: yes, work piece detection: yes, conveyour system: band, fast exchange system spray gun carrier: yes, laquer system - airless: 2, laquer system - airmix: 2, by rollers: yes, by scraper: yes, water cleaning: no, dry exhauster: yes, year :2003 MANUFACTURER: CEFLA, TYPE: SPAYBOTIC, YEAR: 2003, CONTROL: CEFLA, SPRAYING LINE: YES, WORK PIECE WIDTH MIN-MAX MM: 1400, MIN.-MAX. WORKPIECE LENGTH IN MM: 150-4500, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-100, WORKING WIDHT MAX MM: 1400, SPRAYING MACHINE: 1, SPRAYING HEADS - TOTAL: 4, FARBMANAGMENT: YES, WORK PIECE DETECTION: YES, CONVEYOUR SYSTEM: BAND, FAST EXCHANGE SYSTEM SPRAY GUN CARRIER: YES, LAQUER SYSTEM - AIRLESS: 2, LAQUER SYSTEM - AIRMIX: 2, BY ROLLERS: YES, BY SCRAPER: YES, WATER CLEANING: NO, DRY EXHAUSTER: YES, YEAR :2003
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-mobile
belt width 400 mm
adjustable speed
with air knife
dimensions (l x w x h) : ± 3.700 x 900 x 1.800 mm
 MOBILE BELT WIDTH 400 MM ADJUSTABLE SPEED WITH AIR KNIFE DIMENSIONS (L X W X H) : ± 3.700 X 900 X 1.800 MM
Vendedor: Barsso NV
Año de construcción: usado
Ubicación: Land-manufacturer: heesemann cefla türenlackieranlage, type: cefla robot, year: 2004, work piece width min-max mm: 1300, min.-max. workpiece length in mm: 250, min.-max. workpiece height in mm: 3-80, working widht max mm: 1300, spraying line: yes, work piece cleaning: yes, work piece detection: yes, conveyour system: band, spraying stations: 1, fast exchange system spray gun carrier: yes, laquer circles: 4, laquer system - airless: yes, laquer system - airmix: yes, by rollers: yes, by scraper: yes, dry exhauster: yes, jet dryers (number): hochtrockner, sanding machines (number): 1, brushing machine: no, design sanding machine no 1: querband/längs/längs, dust exhaust (number): yes, uv dryers - 3 lamps inclined (number): yes 120 watt, jet dryers (number): hochtrockner, high dryers (number): 32, length of pallets mm: 5500, feedin speed m/min: 3-6, year :2004 MANUFACTURER: HEESEMANN CEFLA TüRENLACKIERANLAGE, TYPE: CEFLA ROBOT, YEAR: 2004, WORK PIECE WIDTH MIN-MAX MM: 1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 250, MIN.-MAX. WORKPIECE HEIGHT IN MM: 3-80, WORKING WIDHT MAX MM: 1300, SPRAYING LINE: YES, WORK PIECE CLEANING: YES, WORK PIECE DETECTION: YES, CONVEYOUR SYSTEM: BAND, SPRAYING STATIONS: 1, FAST EXCHANGE SYSTEM SPRAY GUN CARRIER: YES, LAQUER CIRCLES: 4, LAQUER SYSTEM - AIRLESS: YES, LAQUER SYSTEM - AIRMIX: YES, BY ROLLERS: YES, BY SCRAPER: YES, DRY EXHAUSTER: YES, JET DRYERS (NUMBER): HOCHTROCKNER, SANDING MACHINES (NUMBER): 1, BRUSHING MACHINE: NO, DESIGN SANDING MACHINE NO 1: QUERBAND/LäNGS/LäNGS, DUST EXHAUST (NUMBER): YES, UV DRYERS - 3 LAMPS INCLINED (NUMBER): YES 120 WATT, JET DRYERS (NUMBER): HOCHTROCKNER, HIGH DRYERS (NUMBER): 32, LENGTH OF PALLETS MM: 5500, FEEDIN SPEED M/MIN: 3-6, YEAR :2004
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-1 kusters 2-bowl rolling calender type 212.70-3200
3200 mm working width (3400 mm face roller width)
top bowl steel schreiner (oil heated)
bottom bowl racolan (s-roll)
thermal oil heated
pressure 275 newton/mm = 95 tons 1 KUSTERS 2-BOWL ROLLING CALENDER TYPE 212.70-3200 3200 MM WORKING WIDTH (3400 MM FACE ROLLER WIDTH) TOP BOWL STEEL SCHREINER (OIL HEATED) BOTTOM BOWL RACOLAN (S-ROLL) THERMAL OIL HEATED PRESSURE 275 NEWTON/MM = 95 TONS
Vendedor: LUSAMATEX - Máquinas Têxteis, Lda.
Año de construcción: usado
Ubicación: Land-manufacturer: venyeskob, type: leistenspritzmaschine, year: 1991, control: programm, work piece width min-max mm: 10-300, min.-max. workpiece length in mm: 400-3000, min.-max. workpiece height in mm: 8-60, working widht max mm: 300, spraying heads - total: 4, work piece cleaning: no, work piece detection: yes, conveyour system: band/rolle, spraying stations: 1, laquer circles: 2, laquer system - airless: yes, laquer system - airmix: yes, laquer recharging: no, dry exhauster: yes, feeding belt mm: 3000, feeding speed m/min: 10-60, diameter of brushes: 150, number of rotations controlled: no, units mounted upright: yes4, units mounted inclined: 2, polishing width mm: 100, axle-diameter: 30, engine power - kw: 0,8, vacuum belt: no, feeding speed continous adjustable: yes, feeding speed continous adjustable: yes, year :1991 MANUFACTURER: VENYESKOB, TYPE: LEISTENSPRITZMASCHINE, YEAR: 1991, CONTROL: PROGRAMM, WORK PIECE WIDTH MIN-MAX MM: 10-300, MIN.-MAX. WORKPIECE LENGTH IN MM: 400-3000, MIN.-MAX. WORKPIECE HEIGHT IN MM: 8-60, WORKING WIDHT MAX MM: 300, SPRAYING HEADS - TOTAL: 4, WORK PIECE CLEANING: NO, WORK PIECE DETECTION: YES, CONVEYOUR SYSTEM: BAND/ROLLE, SPRAYING STATIONS: 1, LAQUER CIRCLES: 2, LAQUER SYSTEM - AIRLESS: YES, LAQUER SYSTEM - AIRMIX: YES, LAQUER RECHARGING: NO, DRY EXHAUSTER: YES, FEEDING BELT MM: 3000, FEEDING SPEED M/MIN: 10-60, DIAMETER OF BRUSHES: 150, NUMBER OF ROTATIONS CONTROLLED: NO, UNITS MOUNTED UPRIGHT: YES4, UNITS MOUNTED INCLINED: 2, POLISHING WIDTH MM: 100, AXLE-DIAMETER: 30, ENGINE POWER - KW: 0,8, VACUUM BELT: NO, FEEDING SPEED CONTINOUS ADJUSTABLE: YES, FEEDING SPEED CONTINOUS ADJUSTABLE: YES, YEAR :1991
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-1 kusters 3-bowl rolling calender type 213.70-3200
3200 mm working width (3400 mm face roller width)
top bowl steel chromed (oil heated)
middle bowl racolan (s-roll)
bottom bowl steel schreiner (oil heated)
thermal oil heated
pressure 300 newton/mm = 100 tons 1 KUSTERS 3-BOWL ROLLING CALENDER TYPE 213.70-3200 3200 MM WORKING WIDTH (3400 MM FACE ROLLER WIDTH) TOP BOWL STEEL CHROMED (OIL HEATED) MIDDLE BOWL RACOLAN (S-ROLL) BOTTOM BOWL STEEL SCHREINER (OIL HEATED) THERMAL OIL HEATED PRESSURE 300 NEWTON/MM = 100 TONS
Vendedor: LUSAMATEX - Máquinas Têxteis, Lda.
Año de construcción: usado
Ubicación: Land-manufacturer: cattinar rotoclean, type: durchlauflackieranlage, year: 2001/1985, work piece width min-max mm: 100-1300, min.-max. workpiece length in mm: 250-4500, min.-max. workpiece height in mm: 8-60, spraying line: yes, spraying heads - total: 8, work piece cleaning: yes, work piece detection: yes, conveyour system: stahlband, spraying stations: 1, fast exchange system spray gun carrier: no, laquer circles: 2, laquer system - airless: yes, laquer recharging: no, dry exhauster: yes, brushing machine: yes, high dryers (number): 90, length of pallets mm: 4500, feedin speed m/min: 2-5, year :2001/1985 MANUFACTURER: CATTINAR ROTOCLEAN, TYPE: DURCHLAUFLACKIERANLAGE, YEAR: 2001/1985, WORK PIECE WIDTH MIN-MAX MM: 100-1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 250-4500, MIN.-MAX. WORKPIECE HEIGHT IN MM: 8-60, SPRAYING LINE: YES, SPRAYING HEADS - TOTAL: 8, WORK PIECE CLEANING: YES, WORK PIECE DETECTION: YES, CONVEYOUR SYSTEM: STAHLBAND, SPRAYING STATIONS: 1, FAST EXCHANGE SYSTEM SPRAY GUN CARRIER: NO, LAQUER CIRCLES: 2, LAQUER SYSTEM - AIRLESS: YES, LAQUER RECHARGING: NO, DRY EXHAUSTER: YES, BRUSHING MACHINE: YES, HIGH DRYERS (NUMBER): 90, LENGTH OF PALLETS MM: 4500, FEEDIN SPEED M/MIN: 2-5, YEAR :2001/1985
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-kusters thermosol dyeing range, roller width 2000 mm, year 1985

kusters dyeing padder model 222.11.1800

gogasdortmund infrered gas heated predryer, installed in 2005

artos hot flue

exit by a-frame batcher

machine with inverters KUSTERS THERMOSOL DYEING RANGE, ROLLER WIDTH 2000 MM, YEAR 1985 KUSTERS DYEING PADDER MODEL 222.11.1800 GOGASDORTMUND INFRERED GAS HEATED PREDRYER, INSTALLED IN 2005 ARTOS HOT FLUE EXIT BY A-FRAME BATCHER MACHINE WITH INVERTERS
Vendedor: Inautex
Año de construcción: usado
Ubicación: Land-manufacturer: venyeskob venspray perfect, type: lackierstrasse mit trocknung, year: 2015, control: venyeskob/, spraying line: yes, work piece width min-max mm: 50-1300, min.-max. workpiece length in mm: 150, min.-max. workpiece height in mm: 3-80, belt conveyor: yes, dust exhaust (number): yes, work piece cleaning: yes, spraying machine: venspray perfect, farbmanagment: yes, work piece detection: yes, conveyour system: band, spraying stations: 1, fast exchange system spray gun carrier: yes, laquer circles: 4, laquer system - airless: yes, laquer system - airmix: yes, lackrückgewinnung über band: yes, wäscheranlage: 2 stück, dry exhauster: yes, dust exhaust (number): yes, year :2015 MANUFACTURER: VENYESKOB VENSPRAY PERFECT, TYPE: LACKIERSTRASSE MIT TROCKNUNG, YEAR: 2015, CONTROL: VENYESKOB/, SPRAYING LINE: YES, WORK PIECE WIDTH MIN-MAX MM: 50-1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 150, MIN.-MAX. WORKPIECE HEIGHT IN MM: 3-80, BELT CONVEYOR: YES, DUST EXHAUST (NUMBER): YES, WORK PIECE CLEANING: YES, SPRAYING MACHINE: VENSPRAY PERFECT, FARBMANAGMENT: YES, WORK PIECE DETECTION: YES, CONVEYOUR SYSTEM: BAND, SPRAYING STATIONS: 1, FAST EXCHANGE SYSTEM SPRAY GUN CARRIER: YES, LAQUER CIRCLES: 4, LAQUER SYSTEM - AIRLESS: YES, LAQUER SYSTEM - AIRMIX: YES, LACKR&UUML;CKGEWINNUNG &UUML;BER BAND: YES, W&AUML;SCHERANLAGE: 2 ST&UUML;CK, DRY EXHAUSTER: YES, DUST EXHAUST (NUMBER): YES, YEAR :2015
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Precio: 380.000 €
Ubicación: Land-pet blowing and filling line with sidel combi filler 100ml
- nominal output: 14,400 bph (100ml)
- bottle size range: 100 ml - 1.0 litr. 
       (converting set for 0.5 and 1ltr. not included!)
- bottle neck / screw cap: 30/25 mm low (screw cap type common for still water and    
  soft drinks)
- ultra clean design, - min. log3 (dry preform decontamination by vaporised h2o2  
  novative sidel predis system) - cip, sip - cop, sop filler sanitation / sterile  
  air overpressure
- sidel combi 8 fmm-/ 24 / 8c pet blowing-filling-capping compact machine o heuft 
  cap and level checker
- fuji intersleeve 3200-de sleeve machine
- smi mp 100 multi packer - cluster pack 2 x 2, 2 x 3, 2 x 4 carton wrapped
- smi lsk 15 shrink-wrapping machine
- bottle accumulation and conveyor system

year of manufacturing and up is start 2006
operating hours 29000 h

out of operating since end of 2014.

complete equipment, is still installed and available immediately.

very good conditions. 
   PET BLOWING AND FILLING LINE WITH SIDEL COMBI FILLER 100ML - NOMINAL OUTPUT: 14,400 BPH (100ML) - BOTTLE SIZE RANGE: 100 ML - 1.0 LITR. (CONVERTING SET FOR 0.5 AND 1LTR. NOT INCLUDED!) - BOTTLE NECK / SCREW CAP: 30/25 MM LOW (SCREW CAP TYPE COMMON FOR STILL WATER AND SOFT DRINKS) - ULTRA CLEAN DESIGN, - MIN. LOG3 (DRY PREFORM DECONTAMINATION BY VAPORISED H2O2 NOVATIVE SIDEL PREDIS SYSTEM) - CIP, SIP - COP, SOP FILLER SANITATION / STERILE AIR OVERPRESSURE - SIDEL COMBI 8 FMM-/ 24 / 8C PET BLOWING-FILLING-CAPPING COMPACT MACHINE O HEUFT CAP AND LEVEL CHECKER - FUJI INTERSLEEVE 3200-DE SLEEVE MACHINE - SMI MP 100 MULTI PACKER - CLUSTER PACK 2 X 2, 2 X 3, 2 X 4 CARTON WRAPPED - SMI LSK 15 SHRINK-WRAPPING MACHINE - BOTTLE ACCUMULATION AND CONVEYOR SYSTEM YEAR OF MANUFACTURING AND UP IS START 2006 OPERATING HOURS 29000 H OUT OF OPERATING SINCE END OF 2014. COMPLETE EQUIPMENT, IS STILL INSTALLED AND AVAILABLE IMMEDIATELY. VERY GOOD CONDITIONS.
Vendedor: WPS Molkereimaschinen
Año de construcción: usado
Ubicación: Land-manufacturer: makor, work piece width min-max mm: 10-225, min.-max. workpiece length in mm: 300-4800, min.-max. workpiece height in mm: 110, vorschub m/min-max/min: 20-60, laquer circles: 2, dry exhauster: yes, spraying heads - total: 4, working width mm: 300, work piece detection: yes, conveyour system: band und stange, feeding belt mm: 1500, brush: 4 büsten köpfe, longitudinal feeding: yes, freitext: leistenhochtrockner länge 5500 mm /va ausführung spritzmaschine, MANUFACTURER: MAKOR, WORK PIECE WIDTH MIN-MAX MM: 10-225, MIN.-MAX. WORKPIECE LENGTH IN MM: 300-4800, MIN.-MAX. WORKPIECE HEIGHT IN MM: 110, VORSCHUB M/MIN-MAX/MIN: 20-60, LAQUER CIRCLES: 2, DRY EXHAUSTER: YES, SPRAYING HEADS - TOTAL: 4, WORKING WIDTH MM: 300, WORK PIECE DETECTION: YES, CONVEYOUR SYSTEM: BAND UND STANGE, FEEDING BELT MM: 1500, BRUSH: 4 B&UUML;STEN K&OUML;PFE, LONGITUDINAL FEEDING: YES, FREITEXT: LEISTENHOCHTROCKNER L&AUML;NGE 5500 MM /VA AUSF&UUML;HRUNG SPRITZMASCHINE,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Precio: 1.480 €
Ubicación: Land-divider-sto?ekdo bread-dough, globe. the device has a cone and gutters teflon, air vent and flour duster. we issue a invoice eu vat (0%), we can help you arrange transport.  DIVIDER-STO?EKDO BREAD-DOUGH, GLOBE. THE DEVICE HAS A CONE AND GUTTERS TEFLON, AIR VENT AND FLOUR DUSTER. WE ISSUE A INVOICE EU VAT (0%), WE CAN HELP YOU ARRANGE TRANSPORT.
Vendedor: Maszyny Piekarnicze i Cukiernicze
Año de construcción: usado
Ubicación: Land-manufacturer: venyeskob ex , type: hgs / z (s4), year: 1999, control: cnc, lackierstrasse für: 10-1300, sanding machine: 6-80, transportband 1: 1300, ir-vorwämmodul: 4, ionising: 1450, abdunstrockner mm : yes, mit oir lampen: band, abdunstrockner mm: 1, 4-axis machine: yes, 5 axis machine: 1, c axis: 2, robot head: yes, spraying stations: böllhof, working widht mm: yes, feeding speed m/min: yes, regelbereich m/min: band/walzen, bedienseite : yes, dry exhauster: yes, transport system steel belt: 3-4, year :1999 MANUFACTURER: VENYESKOB EX , TYPE: HGS / Z (S4), YEAR: 1999, CONTROL: CNC, LACKIERSTRASSE F&UUML;R: 10-1300, SANDING MACHINE: 6-80, TRANSPORTBAND 1: 1300, IR-VORW&AUML;MMODUL: 4, IONISING: 1450, ABDUNSTROCKNER MM : YES, MIT OIR LAMPEN: BAND, ABDUNSTROCKNER MM: 1, 4-AXIS MACHINE: YES, 5 AXIS MACHINE: 1, C AXIS: 2, ROBOT HEAD: YES, SPRAYING STATIONS: B&OUML;LLHOF, WORKING WIDHT MM: YES, FEEDING SPEED M/MIN: YES, REGELBEREICH M/MIN: BAND/WALZEN, BEDIENSEITE : YES, DRY EXHAUSTER: YES, TRANSPORT SYSTEM STEEL BELT: 3-4, YEAR :1999
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more types: