51 ofertas

Año de construcción: usado
Ubicación: Land-dust-free matting system for full and foil matting. in contrast to other systems, is fix the glass panel and will not move. the work truck is gradually weitergetaktet, according to the entry in the control. the supporting wall with a rubber bellows is coated to prevent damage to the glass at the back. grit and a supporting strip of plastic provide a safe standing position of the glass. the nozzle is automatically a drive, which is adjustable up-by means of frequency converter and moves down. operations such as suction, work truck, jet motion and filter system are carried out by a plc. a filter system with brush cleaning and special cyclone separator, dust and abrasive are separated. the purified abrasive sand can be reused continuously through this procedure.

-new programmable sub-areas-beam software
-up to 10 faces and glasses each record individually adjustable and can be saved
-memory module for 20 complete data sets including all parameters (without pressure) - for recurrent lenses (series production)
advantages:
-approved cleaning cartridge filter
-automatic blasting and feed motion
-machine is easily accessible via a viewing window to open
-blasting and auxiliary nozzle from bor corbid, extremely long life
-cyclone separator for the separation of dust and abrasives

data:

-year of construction: 2011
-machine number: 03011 s
-system is run not much, max 1 hour / day
-automatic sand blasting with magnetic board
-work size: 3000 x 1500 mm
-glass thickness: 3-30 mm
-incl. control jetter
-machine height: 2300 mm
-machine length: 4200 mm
-machine depth: 1900 mm
-beam height max: 1200 mm
-max beam length: 2800 mm
-capacity: 2,3 kw
-machine weight: 1350 kg

new price: â?¬30,000
retail price: vb DUST-FREE MATTING SYSTEM FOR FULL AND FOIL MATTING. IN CONTRAST TO OTHER SYSTEMS, IS FIX THE GLASS PANEL AND WILL NOT MOVE. THE WORK TRUCK IS GRADUALLY WEITERGETAKTET, ACCORDING TO THE ENTRY IN THE CONTROL. THE SUPPORTING WALL WITH A RUBBER BELLOWS IS COATED TO PREVENT DAMAGE TO THE GLASS AT THE BACK. GRIT AND A SUPPORTING STRIP OF PLASTIC PROVIDE A SAFE STANDING POSITION OF THE GLASS. THE NOZZLE IS AUTOMATICALLY A DRIVE, WHICH IS ADJUSTABLE UP-BY MEANS OF FREQUENCY CONVERTER AND MOVES DOWN. OPERATIONS SUCH AS SUCTION, WORK TRUCK, JET MOTION AND FILTER SYSTEM ARE CARRIED OUT BY A PLC. A FILTER SYSTEM WITH BRUSH CLEANING AND SPECIAL CYCLONE SEPARATOR, DUST AND ABRASIVE ARE SEPARATED. THE PURIFIED ABRASIVE SAND CAN BE REUSED CONTINUOUSLY THROUGH THIS PROCEDURE. -NEW PROGRAMMABLE SUB-AREAS-BEAM SOFTWARE -UP TO 10 FACES AND GLASSES EACH RECORD INDIVIDUALLY ADJUSTABLE AND CAN BE SAVED -MEMORY MODULE FOR 20 COMPLETE DATA SETS INCLUDING ALL PARAMETERS (WITHOUT PRESSURE) - FOR RECURRENT LENSES (SERIES PRODUCTION) ADVANTAGES: -APPROVED CLEANING CARTRIDGE FILTER -AUTOMATIC BLASTING AND FEED MOTION -MACHINE IS EASILY ACCESSIBLE VIA A VIEWING WINDOW TO OPEN -BLASTING AND AUXILIARY NOZZLE FROM BOR CORBID, EXTREMELY LONG LIFE -CYCLONE SEPARATOR FOR THE SEPARATION OF DUST AND ABRASIVES DATA: -YEAR OF CONSTRUCTION: 2011 -MACHINE NUMBER: 03011 S -SYSTEM IS RUN NOT MUCH, MAX 1 HOUR / DAY -AUTOMATIC SAND BLASTING WITH MAGNETIC BOARD -WORK SIZE: 3000 X 1500 MM -GLASS THICKNESS: 3-30 MM -INCL. CONTROL JETTER -MACHINE HEIGHT: 2300 MM -MACHINE LENGTH: 4200 MM -MACHINE DEPTH: 1900 MM -BEAM HEIGHT MAX: 1200 MM -MAX BEAM LENGTH: 2800 MM -CAPACITY: 2,3 KW -MACHINE WEIGHT: 1350 KG NEW PRICE: Â?¬30,000 RETAIL PRICE: VB
Vendedor: Mirrotech Glas & Spiegel GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 200 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 1500 x 1300 x 1600 mm<br/>description: sulo large waste container 1.1 cbm<br> steel sheet galvanized 131 kg<br> with slight transport damages<br> WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 1500 X 1300 X 1600 MM
DESCRIPTION: SULO LARGE WASTE CONTAINER 1.1 CBM
STEEL SHEET GALVANIZED 131 KG
WITH SLIGHT TRANSPORT DAMAGES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-year of construction: 2002
hours of operation machine: 52.500 h (22.10.2018)
maximum cutting force approx.: 220 kn
arb.ber. stamping operation approx.: 3000 x 1650 mm
control: siemens sinumerik 840 d
maximum sheet thickness approx.: 8 mm
space requirement approx.: 7600 x 7000 mm
approximate weight machine: 17,300 kg
power consumption: 29 kva

standard equipment
-stable, easily accessible c-frame
-coordinate guide with integrated linear magazine 21 places for tools and 4 places for clamps
-drives with maintenance-free drehstormmotoren
-automatic part slide 500 x 500 mm

punching head
-hydraulic mono - tool holder 360 â° rotation
for all tools, automatic tool length compensation, tool lubrication
-2 lubricant containers, programmable stripper motion, punching slug extraction
-programmable presser to set up with a low locking force

control
-open based sinumerik 840 d control system
-10.4 "tft color display
-diagnosis function
-graphics programming tops 2000
-integrated 3.5 "-floppy"
-bnc and rj45 network connector

security
-ce marking
-multi-beam photoelectric
-emergency shut-down hydraulic
-bulge detection

advanced cutting equipment
-function multi tool
-feature slots
-function thread forming
signing / fast beading
-function softpunch
-asc (advanced control stripper)

advanced machine equipment
-4 x single to ã¶ffnede clamps
-4 x hã¶henbewegliche clamping pratzen
-auto claw clamping
-sensor for slide of part of
-vibration-damped installation
-designation cylinder
-conveyors
-scratch-poor editing
-blowing device for small parts

technical data subject to change - subject to prior sale YEAR OF CONSTRUCTION: 2002 HOURS OF OPERATION MACHINE: 52.500 H (22.10.2018) MAXIMUM CUTTING FORCE APPROX.: 220 KN ARB.BER. STAMPING OPERATION APPROX.: 3000 X 1650 MM CONTROL: SIEMENS SINUMERIK 840 D MAXIMUM SHEET THICKNESS APPROX.: 8 MM SPACE REQUIREMENT APPROX.: 7600 X 7000 MM APPROXIMATE WEIGHT MACHINE: 17,300 KG POWER CONSUMPTION: 29 KVA STANDARD EQUIPMENT -STABLE, EASILY ACCESSIBLE C-FRAME -COORDINATE GUIDE WITH INTEGRATED LINEAR MAGAZINE 21 PLACES FOR TOOLS AND 4 PLACES FOR CLAMPS -DRIVES WITH MAINTENANCE-FREE DREHSTORMMOTOREN -AUTOMATIC PART SLIDE 500 X 500 MM PUNCHING HEAD -HYDRAULIC MONO - TOOL HOLDER 360 &ACIRC;&DEG; ROTATION FOR ALL TOOLS, AUTOMATIC TOOL LENGTH COMPENSATION, TOOL LUBRICATION -2 LUBRICANT CONTAINERS, PROGRAMMABLE STRIPPER MOTION, PUNCHING SLUG EXTRACTION -PROGRAMMABLE PRESSER TO SET UP WITH A LOW LOCKING FORCE CONTROL -OPEN BASED SINUMERIK 840 D CONTROL SYSTEM -10.4 "TFT COLOR DISPLAY -DIAGNOSIS FUNCTION -GRAPHICS PROGRAMMING TOPS 2000 -INTEGRATED 3.5 "-FLOPPY" -BNC AND RJ45 NETWORK CONNECTOR SECURITY -CE MARKING -MULTI-BEAM PHOTOELECTRIC -EMERGENCY SHUT-DOWN HYDRAULIC -BULGE DETECTION ADVANCED CUTTING EQUIPMENT -FUNCTION MULTI TOOL -FEATURE SLOTS -FUNCTION THREAD FORMING SIGNING / FAST BEADING -FUNCTION SOFTPUNCH -ASC (ADVANCED CONTROL STRIPPER) ADVANCED MACHINE EQUIPMENT -4 X SINGLE TO &ATILDE;&PARA;FFNEDE CLAMPS -4 X H&ATILDE;&PARA;HENBEWEGLICHE CLAMPING PRATZEN -AUTO CLAW CLAMPING -SENSOR FOR SLIDE OF PART OF -VIBRATION-DAMPED INSTALLATION -DESIGNATION CYLINDER -CONVEYORS -SCRATCH-POOR EDITING -BLOWING DEVICE FOR SMALL PARTS TECHNICAL DATA SUBJECT TO CHANGE - SUBJECT TO PRIOR SALE
Vendedor: mteg GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 200 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 1500 x 1300 x 1600 mm<br/>description: sulo large waste container 1.1cbm steel sheet galvanized 131kg<br> with slight transport damages<br> WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 1500 X 1300 X 1600 MM
DESCRIPTION: SULO LARGE WASTE CONTAINER 1.1CBM STEEL SHEET GALVANIZED 131KG
WITH SLIGHT TRANSPORT DAMAGES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-chicken feet processing plant

this is a professional and whole chicken feet peeling production line, easy to operate, high output. the line was used only 4 months and could also be customized according to the requirements of the buyer.

chicken feet peeling production line advantages:
* the machines are all made of stainless steel, wich makes the chicken feet hygiene.
* excellent production quality, easy to operate
* a variety of processing capacity, we can customize it
* stable performance, low cost and labor saving.

the flow chart of the chicken feet peeling line is as follows

1 conveying
2 chicken feet
3 conveying
4 blanching
5 peeling
6 pre-cooling
7 sorting conveyor
8 cutting machine

1 put the chicken paw on the conveyor and transport the chicken feet to the blanching machine.
2 blanching is a necessary part in processing the chicken feet, through disinfect and cook chicken feet, the chicken feet is easy to peeling and it also can protect its natural flavor from being broken.
3 transport the chicken feet to the chicken feet peeling machine for peeling the skin via the conveyor.
4 the last and also core step is peeling, the chicken peeling machine can peeling the chicken feet skin and nail cleanly and there is no damage to chicken feet.
5 spyral type auto feet pre-cooling machine used for cooling chickens, in order to achieve the purpose of detoxification.


location latvia
voltage 400
frequency 50
4 months old
manufactured 2017

for sale the whole line consisting of

1 peeling line

setup in buyers plant available upon request

* for sale is a full set of machines for chicken feet processing.
* an example of average factory scheme in pdf format (drawing) to understand better all process together is available upon request.
* nominal power of this machines are 1 ton per hour, in fact optimal power is 6tn ready product in 8 working hr time.
* all machines goes with 3 phase, 380-400v electricity supply (consumption 21kw/hr)
* for heating purposes steam is needed (500kg/hr, range +130+160c degrees)
* water and drainage supply is needed (min 550 l/ hr)
* people for operation depends dramatically from feet quality.(percentage of black pads to remove) 

here are detailed description:

1. net chain lifting conveyor. main body is from stainless steel 304, net chain type lifting mechanism. chain width 600mm. usage - as supply point to feed scalding machine. 1 pc.

2. net chain chicken feet scalding machine. main body from stainless steel 304, net chain type transmission mechanism. steam pipe connector, automatic temperature controller for steam machine electromagnetic valve. with air supply heat mixer. outlet chute is divided into two parts- for two chicken feet peeling machines. machine dimensions: 5000x1100xh. usage - to blanche raw chicken feet and repair for yellow skin removal. 1 pc.

3. chicken feet peeling machine. main body from stainless steel 304 with food grade rubber peeling fingers inside. equipped with water supply. cleaning programme speed control with frequency controller. usage - for automatic chicken feet yellow skin peeling. length 3200. 2 pc.

4. elevating conveyor. main body from stainless steel 304, belt from 4 mm oil resistant food grade rubber. size 2500x550xh. usage - transporting chicken into cooling tank. 1 pc.

5. chute. usage - between elevating conveyor and cooling tank. main body from stainless steel 304. size 2000x800xh. 1 pc.

6. net chain washing cooling machine. main body from stainless steel 304. belt- net chain type transmission mechanism. with air supply water mixer, with water supply. usage - for chicken feet washing and pre-cooling. size: 6000x1100xh. 1 pc.

7. sorting table - conveyor. main body from stainless steel 304. belt from food grade rubber. usage - for sorting peeled chicken feet and check quality. size 6000x1100xh. 1 pc.

8. feet cutting machine. main body from stainless steel 304. special chicken feet keeping conveyor belt. equipped with 2 chicken feet cutting blades. usage - to cut chicken feet ankle part to make paws. 2 pc.

9. electricity controller (on/off for each machine) 2 pc. and frequency (speed) controller for chicken feet peeling machines. 2 pc.

10. sorting table. from stainless steel 304. usage - for any additional job - packaging, weighting, cleaning etc. 800x1800xh 2 pc. and 900x1900xh 2 pc.         CHICKEN FEET PROCESSING PLANT THIS IS A PROFESSIONAL AND WHOLE CHICKEN FEET PEELING PRODUCTION LINE, EASY TO OPERATE, HIGH OUTPUT. THE LINE WAS USED ONLY 4 MONTHS AND COULD ALSO BE CUSTOMIZED ACCORDING TO THE REQUIREMENTS OF THE BUYER. CHICKEN FEET PEELING PRODUCTION LINE ADVANTAGES: * THE MACHINES ARE ALL MADE OF STAINLESS STEEL, WICH MAKES THE CHICKEN FEET HYGIENE. * EXCELLENT PRODUCTION QUALITY, EASY TO OPERATE * A VARIETY OF PROCESSING CAPACITY, WE CAN CUSTOMIZE IT * STABLE PERFORMANCE, LOW COST AND LABOR SAVING. THE FLOW CHART OF THE CHICKEN FEET PEELING LINE IS AS FOLLOWS 1 CONVEYING 2 CHICKEN FEET 3 CONVEYING 4 BLANCHING 5 PEELING 6 PRE-COOLING 7 SORTING CONVEYOR 8 CUTTING MACHINE 1 PUT THE CHICKEN PAW ON THE CONVEYOR AND TRANSPORT THE CHICKEN FEET TO THE BLANCHING MACHINE. 2 BLANCHING IS A NECESSARY PART IN PROCESSING THE CHICKEN FEET, THROUGH DISINFECT AND COOK CHICKEN FEET, THE CHICKEN FEET IS EASY TO PEELING AND IT ALSO CAN PROTECT ITS NATURAL FLAVOR FROM BEING BROKEN. 3 TRANSPORT THE CHICKEN FEET TO THE CHICKEN FEET PEELING MACHINE FOR PEELING THE SKIN VIA THE CONVEYOR. 4 THE LAST AND ALSO CORE STEP IS PEELING, THE CHICKEN PEELING MACHINE CAN PEELING THE CHICKEN FEET SKIN AND NAIL CLEANLY AND THERE IS NO DAMAGE TO CHICKEN FEET. 5 SPYRAL TYPE AUTO FEET PRE-COOLING MACHINE USED FOR COOLING CHICKENS, IN ORDER TO ACHIEVE THE PURPOSE OF DETOXIFICATION. LOCATION LATVIA VOLTAGE 400 FREQUENCY 50 4 MONTHS OLD MANUFACTURED 2017 FOR SALE THE WHOLE LINE CONSISTING OF 1 PEELING LINE SETUP IN BUYERS PLANT AVAILABLE UPON REQUEST * FOR SALE IS A FULL SET OF MACHINES FOR CHICKEN FEET PROCESSING. * AN EXAMPLE OF AVERAGE FACTORY SCHEME IN PDF FORMAT (DRAWING) TO UNDERSTAND BETTER ALL PROCESS TOGETHER IS AVAILABLE UPON REQUEST. * NOMINAL POWER OF THIS MACHINES ARE 1 TON PER HOUR, IN FACT OPTIMAL POWER IS 6TN READY PRODUCT IN 8 WORKING HR TIME. * ALL MACHINES GOES WITH 3 PHASE, 380-400V ELECTRICITY SUPPLY (CONSUMPTION 21KW/HR) * FOR HEATING PURPOSES STEAM IS NEEDED (500KG/HR, RANGE +130+160C DEGREES) * WATER AND DRAINAGE SUPPLY IS NEEDED (MIN 550 L/ HR) * PEOPLE FOR OPERATION DEPENDS DRAMATICALLY FROM FEET QUALITY.(PERCENTAGE OF BLACK PADS TO REMOVE) HERE ARE DETAILED DESCRIPTION: 1. NET CHAIN LIFTING CONVEYOR. MAIN BODY IS FROM STAINLESS STEEL 304, NET CHAIN TYPE LIFTING MECHANISM. CHAIN WIDTH 600MM. USAGE - AS SUPPLY POINT TO FEED SCALDING MACHINE. 1 PC. 2. NET CHAIN CHICKEN FEET SCALDING MACHINE. MAIN BODY FROM STAINLESS STEEL 304, NET CHAIN TYPE TRANSMISSION MECHANISM. STEAM PIPE CONNECTOR, AUTOMATIC TEMPERATURE CONTROLLER FOR STEAM MACHINE ELECTROMAGNETIC VALVE. WITH AIR SUPPLY HEAT MIXER. OUTLET CHUTE IS DIVIDED INTO TWO PARTS- FOR TWO CHICKEN FEET PEELING MACHINES. MACHINE DIMENSIONS: 5000X1100XH. USAGE - TO BLANCHE RAW CHICKEN FEET AND REPAIR FOR YELLOW SKIN REMOVAL. 1 PC. 3. CHICKEN FEET PEELING MACHINE. MAIN BODY FROM STAINLESS STEEL 304 WITH FOOD GRADE RUBBER PEELING FINGERS INSIDE. EQUIPPED WITH WATER SUPPLY. CLEANING PROGRAMME SPEED CONTROL WITH FREQUENCY CONTROLLER. USAGE - FOR AUTOMATIC CHICKEN FEET YELLOW SKIN PEELING. LENGTH 3200. 2 PC. 4. ELEVATING CONVEYOR. MAIN BODY FROM STAINLESS STEEL 304, BELT FROM 4 MM OIL RESISTANT FOOD GRADE RUBBER. SIZE 2500X550XH. USAGE - TRANSPORTING CHICKEN INTO COOLING TANK. 1 PC. 5. CHUTE. USAGE - BETWEEN ELEVATING CONVEYOR AND COOLING TANK. MAIN BODY FROM STAINLESS STEEL 304. SIZE 2000X800XH. 1 PC. 6. NET CHAIN WASHING COOLING MACHINE. MAIN BODY FROM STAINLESS STEEL 304. BELT- NET CHAIN TYPE TRANSMISSION MECHANISM. WITH AIR SUPPLY WATER MIXER, WITH WATER SUPPLY. USAGE - FOR CHICKEN FEET WASHING AND PRE-COOLING. SIZE: 6000X1100XH. 1 PC. 7. SORTING TABLE - CONVEYOR. MAIN BODY FROM STAINLESS STEEL 304. BELT FROM FOOD GRADE RUBBER. USAGE - FOR SORTING PEELED CHICKEN FEET AND CHECK QUALITY. SIZE 6000X1100XH. 1 PC. 8. FEET CUTTING MACHINE. MAIN BODY FROM STAINLESS STEEL 304. SPECIAL CHICKEN FEET KEEPING CONVEYOR BELT. EQUIPPED WITH 2 CHICKEN FEET CUTTING BLADES. USAGE - TO CUT CHICKEN FEET ANKLE PART TO MAKE PAWS. 2 PC. 9. ELECTRICITY CONTROLLER (ON/OFF FOR EACH MACHINE) 2 PC. AND FREQUENCY (SPEED) CONTROLLER FOR CHICKEN FEET PEELING MACHINES. 2 PC. 10. SORTING TABLE. FROM STAINLESS STEEL 304. USAGE - FOR ANY ADDITIONAL JOB - PACKAGING, WEIGHTING, CLEANING ETC. 800X1800XH 2 PC. AND 900X1900XH 2 PC.
Vendedor: Optimisense LLC
Año de construcción: usado
Precio: used machinery auction RESALE 200 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 1500 x 1300 x 1600 mm<br/>description: sulo large waste container 1.1cbm steel sheet galvanized 131kg<br> with slight transport damages<br> WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 1500 X 1300 X 1600 MM
DESCRIPTION: SULO LARGE WASTE CONTAINER 1.1CBM STEEL SHEET GALVANIZED 131KG
WITH SLIGHT TRANSPORT DAMAGES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-punch laser combination machine
make: trump card
type: trumatic 6000l-1600
year of construction: 2001
hours of operation: 54.341 h / 12 h 015
control: siemens sinumerik 840 d

laser power: 3200 watts
punching power: to 22.
work area: 3085 x 1650 mm
maximum sheet thickness: 8 mm
maximum workpiece weight: 230 kg
maximum punching diameter: 76.2 mm
dimensions: lxwxh = 9100 x 7900 x 2400 mm
weight: 22,500 kg
accuracy: +/-0.10 mm

standard equipment
sturdy c frame
coordinate management with integrated linear magazine
tool places: 17
clamps: 3
drives: maintenance-free three-phase servomotors
programmable presser to set up
sensor-controlled part slides 500 x 500 mm
for punching and laser station, expression cylinder on laser slide
part of boxes: 2
automatic switch-off
laser unit: hochfrequenzangeregter co2 laser tlf 3200,
vibration-isolated, integrated in machine frame,
incl. cooling unit and laser control tasc 3
hi-las high pressure cutting
contourlas for making small holes
cutting gas pressure settings can be programmed
laser cutting head: 5 "-lens, quick change facility,"
distance control slides iii
additional cutting head with 7.5 "lens
additional cutting head with 9 "lens for va editing

punching head:
hydraulic mono tool holder
360 â° rotation for all tools
automatic tool length compensation
tool spray lubrication
2. lubricant containers, punching slug extraction, chip buckets

control sinumerik 840 d
tft colour monitor 10,4 ", easy to use, online help,.
diagnostics and maintenance logbook, technology data,
teleservice, 3.5 "-floppy drive"
bnc / rj45 network connector

security:
multi-beam photoelectric, laser monitoring system,
emergency shut-down
hydraulic suction and compact dust collector
protection against scattered radiation
on the cutting head

advanced cutting equipment
multitool control
multibend
multishear
thread forming
sign
soft punch

advanced machine equipment
4. clamping claw
individually openable side clamps
pneumatic cylinder of designation
vibration damped installation

special fine bleaching treatment
scratch poor editing
exhaust device
bulge detection

handling and organization
chip conveyor with tank

automation
fmc preparation (sheetmaster, bearing interface)
 
the combination of laser and punching technology,
combines the advantages of both techniques in a machine.
 PUNCH LASER COMBINATION MACHINE MAKE: TRUMP CARD TYPE: TRUMATIC 6000L-1600 YEAR OF CONSTRUCTION: 2001 HOURS OF OPERATION: 54.341 H / 12 H 015 CONTROL: SIEMENS SINUMERIK 840 D LASER POWER: 3200 WATTS PUNCHING POWER: TO 22. WORK AREA: 3085 X 1650 MM MAXIMUM SHEET THICKNESS: 8 MM MAXIMUM WORKPIECE WEIGHT: 230 KG MAXIMUM PUNCHING DIAMETER: 76.2 MM DIMENSIONS: LXWXH = 9100 X 7900 X 2400 MM WEIGHT: 22,500 KG ACCURACY: +/-0.10 MM STANDARD EQUIPMENT STURDY C FRAME COORDINATE MANAGEMENT WITH INTEGRATED LINEAR MAGAZINE TOOL PLACES: 17 CLAMPS: 3 DRIVES: MAINTENANCE-FREE THREE-PHASE SERVOMOTORS PROGRAMMABLE PRESSER TO SET UP SENSOR-CONTROLLED PART SLIDES 500 X 500 MM FOR PUNCHING AND LASER STATION, EXPRESSION CYLINDER ON LASER SLIDE PART OF BOXES: 2 AUTOMATIC SWITCH-OFF LASER UNIT: HOCHFREQUENZANGEREGTER CO2 LASER TLF 3200, VIBRATION-ISOLATED, INTEGRATED IN MACHINE FRAME, INCL. COOLING UNIT AND LASER CONTROL TASC 3 HI-LAS HIGH PRESSURE CUTTING CONTOURLAS FOR MAKING SMALL HOLES CUTTING GAS PRESSURE SETTINGS CAN BE PROGRAMMED LASER CUTTING HEAD: 5 "-LENS, QUICK CHANGE FACILITY," DISTANCE CONTROL SLIDES III ADDITIONAL CUTTING HEAD WITH 7.5 "LENS ADDITIONAL CUTTING HEAD WITH 9 "LENS FOR VA EDITING PUNCHING HEAD: HYDRAULIC MONO TOOL HOLDER 360 &ACIRC;&DEG; ROTATION FOR ALL TOOLS AUTOMATIC TOOL LENGTH COMPENSATION TOOL SPRAY LUBRICATION 2. LUBRICANT CONTAINERS, PUNCHING SLUG EXTRACTION, CHIP BUCKETS CONTROL SINUMERIK 840 D TFT COLOUR MONITOR 10,4 ", EASY TO USE, ONLINE HELP,. DIAGNOSTICS AND MAINTENANCE LOGBOOK, TECHNOLOGY DATA, TELESERVICE, 3.5 "-FLOPPY DRIVE" BNC / RJ45 NETWORK CONNECTOR SECURITY: MULTI-BEAM PHOTOELECTRIC, LASER MONITORING SYSTEM, EMERGENCY SHUT-DOWN HYDRAULIC SUCTION AND COMPACT DUST COLLECTOR PROTECTION AGAINST SCATTERED RADIATION ON THE CUTTING HEAD ADVANCED CUTTING EQUIPMENT MULTITOOL CONTROL MULTIBEND MULTISHEAR THREAD FORMING SIGN SOFT PUNCH ADVANCED MACHINE EQUIPMENT 4. CLAMPING CLAW INDIVIDUALLY OPENABLE SIDE CLAMPS PNEUMATIC CYLINDER OF DESIGNATION VIBRATION DAMPED INSTALLATION SPECIAL FINE BLEACHING TREATMENT SCRATCH POOR EDITING EXHAUST DEVICE BULGE DETECTION HANDLING AND ORGANIZATION CHIP CONVEYOR WITH TANK AUTOMATION FMC PREPARATION (SHEETMASTER, BEARING INTERFACE) THE COMBINATION OF LASER AND PUNCHING TECHNOLOGY, COMBINES THE ADVANTAGES OF BOTH TECHNIQUES IN A MACHINE.
Vendedor: METEC GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 200 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 1500 x 1300 x 1600 mm<br/>description: sulo large waste container 1.1 cbm<br> steel sheet galvanized 131 kg<br> with slight transport damages<br> WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 1500 X 1300 X 1600 MM
DESCRIPTION: SULO LARGE WASTE CONTAINER 1.1 CBM
STEEL SHEET GALVANIZED 131 KG
WITH SLIGHT TRANSPORT DAMAGES
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 39.500 €
Ubicación: Land- length x width x height 13500.0 mm ã? 4500.0 mm ã? 3000.0 mm, weight 2000.0 kg

this system was used to thaw frozen shrimp, frozen fish and frozen meat and / or iqf are used as raw material usage.
vsk8ty
it is optimized, carefully to defrost the product in a power-saving mode and to minimize the damage, as well as the weight loss during the process. the income proved to 3-5% better than other systems, which the seller has operated.
it was manufactured by the german high-tech company heinrich gmbh and was installed in 2004.
the system has been well maintained over the years by the manufacturer and maintained. the heinrich gmbh will support the proper removal and, if requested by buyers, rebuild the system at the destination of the buyer and provide the necessary technical support.
with a capacity of 9 by chambers it can a volume of approx. 10 to 12 tons frozen product within 6 to 8 hours.
everything is easy to handle by the workers and has worked perfectly over the years.

description:
-9 defrosting cabins from isolated panels total width of 13.5 metres, depth 450 cm and 300 cm
each of the 9 cabins width: 130cm depth 450cm height.

-1 washing / cleaning cabin for wheelbarrows (product car):
width 170 cm-depth 160 cm height 300 cm plus 1 buffer tank for hot water height of 192 cm and 1 tank for cold water of 270 cm in height

-36 wheel barrows (product wagons) made of galvanized steel for 20 trays
-630 trays of blue color, made of hard plastic food grade of 92 cm x 55 cm dimension

LENGTH X WIDTH X HEIGHT 13500.0 MM &ATILDE;? 4500.0 MM &ATILDE;? 3000.0 MM, WEIGHT 2000.0 KG THIS SYSTEM WAS USED TO THAW FROZEN SHRIMP, FROZEN FISH AND FROZEN MEAT AND / OR IQF ARE USED AS RAW MATERIAL USAGE. VSK8TY IT IS OPTIMIZED, CAREFULLY TO DEFROST THE PRODUCT IN A POWER-SAVING MODE AND TO MINIMIZE THE DAMAGE, AS WELL AS THE WEIGHT LOSS DURING THE PROCESS. THE INCOME PROVED TO 3-5% BETTER THAN OTHER SYSTEMS, WHICH THE SELLER HAS OPERATED. IT WAS MANUFACTURED BY THE GERMAN HIGH-TECH COMPANY HEINRICH GMBH AND WAS INSTALLED IN 2004. THE SYSTEM HAS BEEN WELL MAINTAINED OVER THE YEARS BY THE MANUFACTURER AND MAINTAINED. THE HEINRICH GMBH WILL SUPPORT THE PROPER REMOVAL AND, IF REQUESTED BY BUYERS, REBUILD THE SYSTEM AT THE DESTINATION OF THE BUYER AND PROVIDE THE NECESSARY TECHNICAL SUPPORT. WITH A CAPACITY OF 9 BY CHAMBERS IT CAN A VOLUME OF APPROX. 10 TO 12 TONS FROZEN PRODUCT WITHIN 6 TO 8 HOURS. EVERYTHING IS EASY TO HANDLE BY THE WORKERS AND HAS WORKED PERFECTLY OVER THE YEARS. DESCRIPTION: -9 DEFROSTING CABINS FROM ISOLATED PANELS TOTAL WIDTH OF 13.5 METRES, DEPTH 450 CM AND 300 CM EACH OF THE 9 CABINS WIDTH: 130CM DEPTH 450CM HEIGHT. -1 WASHING / CLEANING CABIN FOR WHEELBARROWS (PRODUCT CAR): WIDTH 170 CM-DEPTH 160 CM HEIGHT 300 CM PLUS 1 BUFFER TANK FOR HOT WATER HEIGHT OF 192 CM AND 1 TANK FOR COLD WATER OF 270 CM IN HEIGHT -36 WHEEL BARROWS (PRODUCT WAGONS) MADE OF GALVANIZED STEEL FOR 20 TRAYS -630 TRAYS OF BLUE COLOR, MADE OF HARD PLASTIC FOOD GRADE OF 92 CM X 55 CM DIMENSION
Vendedor: Prime Catch Seafood GmbH
Año de construcción: usado
Ubicación: Land-x-travel:600 mm<br/>y-travel:400 mm<br/>z-travel:600 (900) mm<br/>total power requirement:13 kw<br/>weight of the machine ca.:3,5 t<br/>dimensions of the machine ca.:1730x3100x2800 m<br/><br/>used, immediately available vertical machining center. machine without repair jam, was replaced by new machine.   machine assemblies control unit heidenhain tnc 426 with digital drive control ü15 \ X-TRAVEL:600 MM
Y-TRAVEL:400 MM
Z-TRAVEL:600 (900) MM
TOTAL POWER REQUIREMENT:13 KW
WEIGHT OF THE MACHINE CA.:3,5 T
DIMENSIONS OF THE MACHINE CA.:1730X3100X2800 M

USED, IMMEDIATELY AVAILABLE VERTICAL MACHINING CENTER. MACHINE WITHOUT REPAIR JAM, WAS REPLACED BY NEW MACHINE. MACHINE ASSEMBLIES CONTROL UNIT HEIDENHAIN TNC 426 WITH DIGITAL DRIVE CONTROL ü15 \"COLOR SCREEN, CONTROL PANEL AND MACHINE CONTROL PANEL ü4-AXIS PLUS MAIN SPINDLE DRIVE ü128KB NC PROGRAM MEMORY (ABOUT 6000 NC BLOCKS) üLINEAR AND CIRCLE INTERPOLATION üSCREW LINE, 3D INTERPOLATION üSCREWS WITHOUT COMPENSATING CHUCK üRADIUS-CORRECTED CONTOUR UP TO 99 SETS IN ADVANCE üPARALLEL OPERATION (PROCESSING AND PROGRAMMING) üFILE MANAGEMENT FOR 64 NC PROGRAMS üPROGRAM INPUT IN THE HEIDENHAIN PLAIN TEXT AND IN ACCORDANCE WITH DIN / ISO üFREE CONTOUR PROGRAMMING IN THE HEIDENHAIN PLAIN TEXT WITH GRAPHICAL SUPPORT üNULL-POINT TABLE WITH 99 ZERO POINTS üBLOCKED TO TRANSFER LONG PROGRAMS üDATA INTERFACE V.24 / RS232-C MAX. 115 KBAUD MACHINE DESIGN STABLE STATOR IN CAST DESIGN, OPTIMAL DAMPING PROPERTIES, LOWER HEAT TRANSFER AND HIGH POSITIONING ACCURACY FORM THE BASIS FOR THE HIGH QUALITY STANDARDS. PROCESSING UNIT 600MM Z-AXIS TRAVEL, IDEAL FOR LARGE WORKPIECES AS WELL AS 4TH AND 5TH NC AXIS FEED DRIVE PRECISION BALL SCREWS WITH PRELOADED NUTS. AND SPINDLE DRIVES, DRIVEN BY HIGH-DYNAMIC AC SERVOMOTORS GUARANTEE POSITIONING AND REPEATABILITY. MAIN DRIVE HIGH TORQUE AT LOW SPEED AND HIGH SPEED RANGE WITH CONSTANT POWER. A HIGH-DYNAMIC AC MAIN DRIVE MOTOR, TOGETHER WITH A PRECISION SPINDLE DRIVE OF THE MAIN SPINDLE, FORM THE BASIS FOR OPTIMUM CUTTING VALUES ??AND HIGH SERVICE LIFE. ELECTRICAL EQUIPMENT - OPERATING VOLTAGE 400V / 50 HZ, CONTROL VOLTAGE 24 V DC, POWER SUPPLY VOLTAGE 220V / 50 HZ, POWER CONSUMPTION APPROX. 15 KVA, PROTECTION 25 A GG (INERT) - IN GENERAL, THE DRIVES USED REQUIRE A TN NETWORK! - THE MACHINE COMPLIES WITH THE EMC STANDARD 55011, LIMIT CLASS A FOR INDUSTRIAL NETWORKS, NOT FOR RESIDENTIAL AREAS! TECHNICAL SPECIFICATIONS WORKSPACE TRAVEL DISTANCE X-AXIS MM 600 TRAVEL Y-AXIS MM 400 TRAVEL Z AXIS MM 600 CUTTING CAPACITY MILLING CAPACITY IN ST 60 CM³ / MIN 350 DRILLING CAPACITY IN ST 60 (WP) MM 40 TAPPING PERFORMANCE IN ST 60 M24 WORKTABLE CLAMPING SURFACE / TABLE MM X MM 750X450 5 PIECES T-SLOTS ACCORDING TO DIN 650 IN X-DIRECTION (WIDTH / DISTANCE) MM 14X100 MEDIUM T-SLOT DESIGNED AS GUIDE GROOVE 14 H7 MAX. TABLE LOAD KG 500 FEED DRIVE SYSTEM AC SERVO ACTUATORS ADJUSTABLE / MAINTENANCE-FREE, DIGITAL EXP. RAPID TRAVERSE SPEED X, Y AND Z AXIS M / MIN 40/40/30 FEED FORCE IN THE X AND Y AXIS (40% ED) N 5000 FEED FORCE IN THE Z AXIS (40% ED) N 8000 WORK UNIT SPINDLE Ø IN FRONT BEARING MM 55 TOOL HOLDER ACCORDING TO DIN 69 871 SK 40 TIGHTENING BOLTS ACCORDING TO DIN 69 872-19 THREE-PHASE AC MOTOR CONTROLLABLE AND MAINTENANCE-FREE DRIVE POWER (40% ED) KW 13 SPEED ??RANGE INFINITELY M- 1 50-9000 MAX. PERMISSIBLE TORQUE (40% ED) AT THE SPINDLE NM 82 TOOL MAGAZINE MAGAZINE SLOTS 24 MAGAZINE TYPE PLATE MAX. TOOL DIA. WITH FULL ASSEMBLY MM 100 FOR FREE NEIGHBORING AREAS MM 200 MAX. TOOL LENGTH AT Ø25MM MM 350 MAX. TOOL WEIGHT KG 4 (6/10) TOOL CHANGE TIME APPROX. S 1,9 (3) CHIP-TO-CHIP TIME ACCORDING TO VDI S 3.9 (5) ACCURACY POSITIONING ACCURACY MM ±0,015 REPEATABILITY MM ±0,005 MASS MACHINE AS TRANSPORT UNIT KG 3500 MACHINE DIMENSIONS WIDTH MM 3100 DEPTH MM 1730 HEIGHT MM 2800 PAINTWORK DD STRUCTURE LACQUER GRAY / BLUE RAL 7035/5003 STANDARD ACCESSORIES ALZMETALL MACHINING CENTER, TYPE BAZ 15 CNC - AC SERVO MOTOR WITH INDIRECT DISTANCE MEASUREMENT - AUTOMATIC CENTRAL LUBRICATION - ELECTRICALLY SECURED PROTECTIVE COVER WITH TELESCOPIC PROTECTIVE SLIDING DOOR, OPENING 950MM - MACHINE FRAME AT THE BOTTOM WITH STEEL BLADE-FITTED BELLOWS, AT THE TOP WITH BELLOWS - COOLING DEVICE COMPLETE, TANK VOLUME 130L, PUMP CAPACITY 48L / MIN AT 1 BAR - LIGHTING THE WORK AREA SPECIAL ACCESSORIES ALZMETALL MACHINING CENTER, TYPE BAZ 15 CNC - HEIDENHAIN TRACK CONTROL TNC 426 - ELECTRONIC HANDWHEEL HR 410 - 3D TOUCH PROBE WITH INFRARED TRANSMISSION - COOLANT SUPPLY THROUGH THE TOOL CONSISTING OF: - TOOL CLAMPING - COOLANT HIGH PRESSURE PUMP DELIVERY CAPACITY 30L / MIN AT 16 BAR - COOLANT FINE-CLEANING BY MEANS OF HYDROCYCLONE - PREPARATION FOR COOLANT SUPPLY THROUGH THE MAIN SPINDLE AND BLOW-OUT DEVICE (WITHOUT COOLANT AND FINE-GRAINING) - RINSE FLUSH HOSE WITH SPRAY GUN, INCLUDING SEPARATE PUMP - CHIP CONVEYOR WITH COOLANT SYSTEM IN SCRATCH-RESISTANT DESIGN ARRANGEMENT ON THE FRONT OF THE MACHINE, BELOW THE COOLANT AND CHIP PAN COOLANT TANK INTEGRATED IN CHIP CONVEYOR, CAPACITY 48 L / MIN AT 1 BAR FOR TECHNICAL DATA AND DETAILS, PLEASE REFER TO THE APPENDIX.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-komori ls 529 + coater h-uv
five colour straight press with coater and h-uv drying
maximum sheet size: 530 x 750 mm
maximum stock thickness: 0.8 mm
year: 2013
112 million impressions
inkline cartridge inking
pdc-s interface
pdc-sii (print density controller - spectrophotometer
pqc off press controls
kms iv monitoring system
khs –a1 (advanced interface)
transfer cylinder cocking remote control
smart sequence
high speed start up
auto ink roller wash
auto blanket wash
auto impression cylinder wash
fully automatic plate changing (benderless)
komorimatic dampening
technotrans alpha. c refrigeration
ink temperature control
long extended delivery
maximum speed: 16,000 sph
chromed cylinders
ir hot air dryer
h-uv drying system (1 x h-uv lamp in end of press)
anilox coater
skeleton transfer cylinders
now dismantled
available: immediately
 KOMORI LS 529 + COATER H-UV FIVE COLOUR STRAIGHT PRESS WITH COATER AND H-UV DRYING MAXIMUM SHEET SIZE: 530 X 750 MM MAXIMUM STOCK THICKNESS: 0.8 MM YEAR: 2013 112 MILLION IMPRESSIONS INKLINE CARTRIDGE INKING PDC-S INTERFACE PDC-SII (PRINT DENSITY CONTROLLER - SPECTROPHOTOMETER PQC OFF PRESS CONTROLS KMS IV MONITORING SYSTEM KHS –A1 (ADVANCED INTERFACE) TRANSFER CYLINDER COCKING REMOTE CONTROL SMART SEQUENCE HIGH SPEED START UP AUTO INK ROLLER WASH AUTO BLANKET WASH AUTO IMPRESSION CYLINDER WASH FULLY AUTOMATIC PLATE CHANGING (BENDERLESS) KOMORIMATIC DAMPENING TECHNOTRANS ALPHA. C REFRIGERATION INK TEMPERATURE CONTROL LONG EXTENDED DELIVERY MAXIMUM SPEED: 16,000 SPH CHROMED CYLINDERS IR HOT AIR DRYER H-UV DRYING SYSTEM (1 X H-UV LAMP IN END OF PRESS) ANILOX COATER SKELETON TRANSFER CYLINDERS NOW DISMANTLED AVAILABLE: IMMEDIATELY
Vendedor: Press-tige Sales Limited
Año de construcción: usado
Ubicación: Land-aircraft shunting tractors crested f206
propulsion: diesel, make: deutz, 8-cylinder, pull approximately 10,600 kp, 1971, tires: 12.00r24 radial, performance about 200 hp comments to the state: is expressly advised that no complete inventory and review the functionality of the auction object has been performed. there is still the possibility that there are significant defects. to learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. the auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. please note also the general terms and conditions of auction. AIRCRAFT SHUNTING TRACTORS CRESTED F206 PROPULSION: DIESEL, MAKE: DEUTZ, 8-CYLINDER, PULL APPROXIMATELY 10,600 KP, 1971, TIRES: 12.00R24 RADIAL, PERFORMANCE ABOUT 200 HP COMMENTS TO THE STATE: IS EXPRESSLY ADVISED THAT NO COMPLETE INVENTORY AND REVIEW THE FUNCTIONALITY OF THE AUCTION OBJECT HAS BEEN PERFORMED. THERE IS STILL THE POSSIBILITY THAT THERE ARE SIGNIFICANT DEFECTS. TO LEARN ABOUT THE CONDITION AND THE EFFICIENCY OF THE AUCTION OBJECT, THE POSSIBILITY OF THE VISIT AND THIS IS HIGHLY RECOMMENDED. THE AUCTIONEER ASSUMES NO RESPONSIBILITY FOR THE QUALITY, CONDITION, COMPLETENESS, ACCESSORIES, SPECIAL PROPERTIES, OPEN OR HIDDEN DEFECTS AND OTHER DAMAGES. PLEASE NOTE ALSO THE GENERAL TERMS AND CONDITIONS OF AUCTION.
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Ubicación: Land-year of construction: 2002
hours of operation machine: 51.317 h (27.09.2018)
hours of operation a laser: 42.285 h (27.09.2018)
hours of operation a beam: 6.426 h (27.09.2018)
laser power: 2700 watt
maximum cutting force approx.: 220 kn
arb.ber. laser operating 3085 x 1650 mm
arb.ber. stamping operation approx.: 3085 x 1740 mm
control: siemens sinumerik 840 d
maximum sheet thickness approx.: 8 mm
space requirement approx.: 7900 x 9100 x 2400 mm
approximate weight machine: 22,500 kg
power consumption: 73 kva

it is this a stand-alone machine without automation

standard equipment
-stable, easily accessible c-frame
-automatic tool changer with 18 stations
-3 clamps
-maintenance-free three-phase servomotors
-part slide 500 x 500 mm (sensor-monitored)
-hi-las high pressure cutting

trumpf laser
co2 laser tlf 2700
-high-frequency excitation
-cooling unit

cutting head
-laser cutting head 5 "
-laser cutting head 7.5 "
-quick change facility
-cutting gas pressure settings can be programmed
-distance control slides
-contourlas

punching head
-hydraulic mono tool holder 360 â° rotation
-programmable presser to set up
-tool spray lubrication
-punching slug extraction
-automatic tool length compensation

control
-siemens sinumerik 840 d
-10.4 "tft color display
-automatic switch-off
-3.5 "floppy disk drive
-rj45 network connector

bdjxp3qbmj
security
-multi-beam photoelectric
-emergency shut-down hydraulic
-compact collector

advanced cutting equipment
-function multitool
-function thread forming
-function soft punch
signing / fast beading
-asc advanced stripper control

advanced machine equipment
-autolas
-designation cylinder
-vibration-damped installation
-chip conveyor with tilt tray

special machining of sheet metal
-ball tables with brushes inserts (kraterzarme edit)
-blowing device for small parts
-bulge detection

note: no changeover cassettes including

technical data subject to change - subject to prior sale
the operating hours for delivery of the machine may differ from the hours recorded in the offer YEAR OF CONSTRUCTION: 2002 HOURS OF OPERATION MACHINE: 51.317 H (27.09.2018) HOURS OF OPERATION A LASER: 42.285 H (27.09.2018) HOURS OF OPERATION A BEAM: 6.426 H (27.09.2018) LASER POWER: 2700 WATT MAXIMUM CUTTING FORCE APPROX.: 220 KN ARB.BER. LASER OPERATING 3085 X 1650 MM ARB.BER. STAMPING OPERATION APPROX.: 3085 X 1740 MM CONTROL: SIEMENS SINUMERIK 840 D MAXIMUM SHEET THICKNESS APPROX.: 8 MM SPACE REQUIREMENT APPROX.: 7900 X 9100 X 2400 MM APPROXIMATE WEIGHT MACHINE: 22,500 KG POWER CONSUMPTION: 73 KVA IT IS THIS A STAND-ALONE MACHINE WITHOUT AUTOMATION STANDARD EQUIPMENT -STABLE, EASILY ACCESSIBLE C-FRAME -AUTOMATIC TOOL CHANGER WITH 18 STATIONS -3 CLAMPS -MAINTENANCE-FREE THREE-PHASE SERVOMOTORS -PART SLIDE 500 X 500 MM (SENSOR-MONITORED) -HI-LAS HIGH PRESSURE CUTTING TRUMPF LASER CO2 LASER TLF 2700 -HIGH-FREQUENCY EXCITATION -COOLING UNIT CUTTING HEAD -LASER CUTTING HEAD 5 " -LASER CUTTING HEAD 7.5 " -QUICK CHANGE FACILITY -CUTTING GAS PRESSURE SETTINGS CAN BE PROGRAMMED -DISTANCE CONTROL SLIDES -CONTOURLAS PUNCHING HEAD -HYDRAULIC MONO TOOL HOLDER 360 &ACIRC;&DEG; ROTATION -PROGRAMMABLE PRESSER TO SET UP -TOOL SPRAY LUBRICATION -PUNCHING SLUG EXTRACTION -AUTOMATIC TOOL LENGTH COMPENSATION CONTROL -SIEMENS SINUMERIK 840 D -10.4 "TFT COLOR DISPLAY -AUTOMATIC SWITCH-OFF -3.5 "FLOPPY DISK DRIVE -RJ45 NETWORK CONNECTOR BDJXP3QBMJ SECURITY -MULTI-BEAM PHOTOELECTRIC -EMERGENCY SHUT-DOWN HYDRAULIC -COMPACT COLLECTOR ADVANCED CUTTING EQUIPMENT -FUNCTION MULTITOOL -FUNCTION THREAD FORMING -FUNCTION SOFT PUNCH SIGNING / FAST BEADING -ASC ADVANCED STRIPPER CONTROL ADVANCED MACHINE EQUIPMENT -AUTOLAS -DESIGNATION CYLINDER -VIBRATION-DAMPED INSTALLATION -CHIP CONVEYOR WITH TILT TRAY SPECIAL MACHINING OF SHEET METAL -BALL TABLES WITH BRUSHES INSERTS (KRATERZARME EDIT) -BLOWING DEVICE FOR SMALL PARTS -BULGE DETECTION NOTE: NO CHANGEOVER CASSETTES INCLUDING TECHNICAL DATA SUBJECT TO CHANGE - SUBJECT TO PRIOR SALE THE OPERATING HOURS FOR DELIVERY OF THE MACHINE MAY DIFFER FROM THE HOURS RECORDED IN THE OFFER
Vendedor: mteg GmbH
Año de construcción: usado
Ubicación: Land-- prinect press center incl. intellistart and colour fast solution
- wallscreen
- preset plus feeder and delivery
- non stop at feeder and delivery
- inpress control (2 measuring bars)
- hycolor dampening units
- vario system
- technotrans combistar can (water cooled)
- ink temperature control
- alcosmart
- inkline 3000
- autoplate advanced
- standard autom. wash-up devices
- airstar water cooled
- airtransfer system
- static star
- clean star
- weko ap 500 duo powder spray
- inkl. pump- and control cabinet and chiller 
- 203 mio. impr.  (9/18) - PRINECT PRESS CENTER INCL. INTELLISTART AND COLOUR FAST SOLUTION - WALLSCREEN - PRESET PLUS FEEDER AND DELIVERY - NON STOP AT FEEDER AND DELIVERY - INPRESS CONTROL (2 MEASURING BARS) - HYCOLOR DAMPENING UNITS - VARIO SYSTEM - TECHNOTRANS COMBISTAR CAN (WATER COOLED) - INK TEMPERATURE CONTROL - ALCOSMART - INKLINE 3000 - AUTOPLATE ADVANCED - STANDARD AUTOM. WASH-UP DEVICES - AIRSTAR WATER COOLED - AIRTRANSFER SYSTEM - STATIC STAR - CLEAN STAR - WEKO AP 500 DUO POWDER SPRAY - INKL. PUMP- AND CONTROL CABINET AND CHILLER - 203 MIO. IMPR. (9/18)
Vendedor: BOZAL Graphische Maschinen GmbH
Año de construcción: usado
Precio: 123.500 €
Ubicación: Land-description
brand	kba
model	rapida 74-5 pwha
id	b74
status	price reduced
price	123.500 € + vat
year of manufacture	2009
location	bucure?ti / bucharest (ro)

sheet fed offset printer kba rapida 74-5 pwha manufactured in 2009. 5 color groups, max. size: 74 x 52 cm (29 x 20 inch), video-register, automatic pile board adjustment, diagonal registration - cocking, suction-tape feed table, electronic double sheet control, acoustic sidelay detection, pneumatic sidelay, antistatic device in feeder kersten, dampening unit varidamp, ink unit temperature control baldwin, hickey picker / remover - doyle systems, automatic roller wash-up device baldwin, automatic setting of printing pressure, semi automatic plate change, blanket washing device baldwin, water circulation and cooling units baldwin - with automix, powder sprayer weko ap 260, cip link-workstation, densitronic DESCRIPTION BRAND KBA MODEL RAPIDA 74-5 PWHA ID B74 STATUS PRICE REDUCED PRICE 123.500 € + VAT YEAR OF MANUFACTURE 2009 LOCATION BUCURE?TI / BUCHAREST (RO) SHEET FED OFFSET PRINTER KBA RAPIDA 74-5 PWHA MANUFACTURED IN 2009. 5 COLOR GROUPS, MAX. SIZE: 74 X 52 CM (29 X 20 INCH), VIDEO-REGISTER, AUTOMATIC PILE BOARD ADJUSTMENT, DIAGONAL REGISTRATION - COCKING, SUCTION-TAPE FEED TABLE, ELECTRONIC DOUBLE SHEET CONTROL, ACOUSTIC SIDELAY DETECTION, PNEUMATIC SIDELAY, ANTISTATIC DEVICE IN FEEDER KERSTEN, DAMPENING UNIT VARIDAMP, INK UNIT TEMPERATURE CONTROL BALDWIN, HICKEY PICKER / REMOVER - DOYLE SYSTEMS, AUTOMATIC ROLLER WASH-UP DEVICE BALDWIN, AUTOMATIC SETTING OF PRINTING PRESSURE, SEMI AUTOMATIC PLATE CHANGE, BLANKET WASHING DEVICE BALDWIN, WATER CIRCULATION AND COOLING UNITS BALDWIN - WITH AUTOMIX, POWDER SPRAYER WEKO AP 260, CIP LINK-WORKSTATION, DENSITRONIC "BASIC". IMPRESS.COUNT: 69 MIO EXTRAS: AUTOPLATE, INK REMOTE CONTROL, AUTOSIZE, CIP. EXWORKS. PRICE IS NEGOTIABLE. CONTACT TEL.: +40-359/175.575 FAX: +40-259/426.248 MOBIL: +40-743/177.040 ; +40-740/221.698 TECHNICAL INSPECTION CAN BE ORGANIZED AT LEAST 24 HRS BEFORE THE DUE DATE WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. (+40-740/221.698 ) HABLAMOS ESPAñOL. BESZéLüNK MAGYARUL. (+40-743/177.040 ) IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Ubicación: Land-die-cutting machine
manufacturer: trumpf
type: trumatic 2020r
year of construction: 2002
control: bosch type 3
hours of operation: 23.005 h

punching power: to 18.
working range: 2500 x 1250 mm
maximum sheet thickness: 6,4 mm
maximum workpiece weight: 150 kg
length: 5500 mm
width: 5900 mm
height: 2200 mm
accuracy: +/-0.1 mm
weight: 11400 kg

standard equipment
sturdy c frame
coordinate management with integrated linear magazine
19 tool places
automatic tool changer
2 clamps

punching head
hydraulic system with closed loop
mono tool holder
360 degree rotation for all tools

drives
maintenance-free three-phase servomotors
programmable presser with a down holder force
tool spray lubrication
punching slug extraction
chip bucket
part of slide 200 x 200 mm and part sorting in 2 containers
2 parts crates

control
bosch type 3
activity-oriented user interface
online help
diagnostic functions
3.5 inch floppy disk drive
graphics programming tops 2000

security
multi-beam photoelectric
emergency shut-down hydraulic

advanced facilities
multi tool
home post
signing / fast beading
2. stop fingers
chip pan
vibration damped installation
brush tables
 DIE-CUTTING MACHINE MANUFACTURER: TRUMPF TYPE: TRUMATIC 2020R YEAR OF CONSTRUCTION: 2002 CONTROL: BOSCH TYPE 3 HOURS OF OPERATION: 23.005 H PUNCHING POWER: TO 18. WORKING RANGE: 2500 X 1250 MM MAXIMUM SHEET THICKNESS: 6,4 MM MAXIMUM WORKPIECE WEIGHT: 150 KG LENGTH: 5500 MM WIDTH: 5900 MM HEIGHT: 2200 MM ACCURACY: +/-0.1 MM WEIGHT: 11400 KG STANDARD EQUIPMENT STURDY C FRAME COORDINATE MANAGEMENT WITH INTEGRATED LINEAR MAGAZINE 19 TOOL PLACES AUTOMATIC TOOL CHANGER 2 CLAMPS PUNCHING HEAD HYDRAULIC SYSTEM WITH CLOSED LOOP MONO TOOL HOLDER 360 DEGREE ROTATION FOR ALL TOOLS DRIVES MAINTENANCE-FREE THREE-PHASE SERVOMOTORS PROGRAMMABLE PRESSER WITH A DOWN HOLDER FORCE TOOL SPRAY LUBRICATION PUNCHING SLUG EXTRACTION CHIP BUCKET PART OF SLIDE 200 X 200 MM AND PART SORTING IN 2 CONTAINERS 2 PARTS CRATES CONTROL BOSCH TYPE 3 ACTIVITY-ORIENTED USER INTERFACE ONLINE HELP DIAGNOSTIC FUNCTIONS 3.5 INCH FLOPPY DISK DRIVE GRAPHICS PROGRAMMING TOPS 2000 SECURITY MULTI-BEAM PHOTOELECTRIC EMERGENCY SHUT-DOWN HYDRAULIC ADVANCED FACILITIES MULTI TOOL HOME POST SIGNING / FAST BEADING 2. STOP FINGERS CHIP PAN VIBRATION DAMPED INSTALLATION BRUSH TABLES
Vendedor: METEC GmbH
Año de construcción: usado
Ubicación: Land-komori gs640+lx(72 x 102cm), age c.2011, serial no.2004, circa 131 million, age: c. dec 2011, 16,500 iph, pqc-s with full size colour monitor, pdc-sx scanning/ measuring / automatic register adjustment, komorimatics (with skewing), oscillation damping on bridge rollers, non stop feeder, non stop delivery, extended delivery, electronic sidelays, air skeleton transfer, ultrasonic 2 sheet detector, ionised blast in feeder, ionised blast on feeder, suction tape feeder
with single belt, advanced cylinder cocking, carton attachments (up to 1mm), 0.8mm paper thickness option. KOMORI GS640+LX(72 X 102CM), AGE C.2011, SERIAL NO.2004, CIRCA 131 MILLION, AGE: C. DEC 2011, 16,500 IPH, PQC-S WITH FULL SIZE COLOUR MONITOR, PDC-SX SCANNING/ MEASURING / AUTOMATIC REGISTER ADJUSTMENT, KOMORIMATICS (WITH SKEWING), OSCILLATION DAMPING ON BRIDGE ROLLERS, NON STOP FEEDER, NON STOP DELIVERY, EXTENDED DELIVERY, ELECTRONIC SIDELAYS, AIR SKELETON TRANSFER, ULTRASONIC 2 SHEET DETECTOR, IONISED BLAST IN FEEDER, IONISED BLAST ON FEEDER, SUCTION TAPE FEEDER WITH SINGLE BELT, ADVANCED CYLINDER COCKING, CARTON ATTACHMENTS (UP TO 1MM), 0.8MM PAPER THICKNESS OPTION.
Vendedor: White Horse Machinery
Año de construcción: usado
Precio: 7.000 €
Ubicación: Land-description
brand	miller
model	tp29s
id	7224
status	active
price	7.000 € + vat
location	buz?u (ro)

offset printing machine 2 colors miller tp29s. format: 50 x 70 cm, with 2 color groups. molleton dampening system with circulation pump. doesn't require an air compressor. maximum speed: 13 000 sheets/h. 

exwork. price is negotiable. 

contact
tel.: +40-359/175.575
fax: +40-259/426.248
mobil: +40-743/177.040 ; +40-740/221.698

technical inspection can be organized at least 24 hrs before the due date

we speak english. wir sprechen deutsch. (+40-740/221.698 )
hablamos español. beszélünk magyarul. (+40-743/177.040 )

irrtum, anderungen und zwischenverkauf vorbehalten /
subject to errors, changes and prior sale /
ne rezervam dreptul la greseli, modificari si vanzare prealabila. DESCRIPTION BRAND MILLER MODEL TP29S ID 7224 STATUS ACTIVE PRICE 7.000 € + VAT LOCATION BUZ?U (RO) OFFSET PRINTING MACHINE 2 COLORS MILLER TP29S. FORMAT: 50 X 70 CM, WITH 2 COLOR GROUPS. MOLLETON DAMPENING SYSTEM WITH CIRCULATION PUMP. DOESN'T REQUIRE AN AIR COMPRESSOR. MAXIMUM SPEED: 13 000 SHEETS/H. EXWORK. PRICE IS NEGOTIABLE. CONTACT TEL.: +40-359/175.575 FAX: +40-259/426.248 MOBIL: +40-743/177.040 ; +40-740/221.698 TECHNICAL INSPECTION CAN BE ORGANIZED AT LEAST 24 HRS BEFORE THE DUE DATE WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. (+40-740/221.698 ) HABLAMOS ESPAñOL. BESZéLüNK MAGYARUL. (+40-743/177.040 ) IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Precio: 18.000 €
Ubicación: Land-description
brand	miller
model	tp 74-4
id	7223
status	active
price	18.000 € + vat
location	buz?u (ro)

offset printing machine 4 colors miller tp 74 - 4, format: 50 x 70 cm with 2/2 or 4/0. alcotron dampening system with baldwin's cooling and re-circulation unit system, quick action plate clamps, unimatic c3 table control, spiess feeder. 

exworks. price is negotiable. 

contact
tel.: +40-359/175.575
fax: +40-259/426.248
mobil: +40-743/177.040 ; +40-740/221.698

technical inspection can be organized at least 24 hrs before the due date

we speak english. wir sprechen deutsch. (+40-740/221.698 )
hablamos español. beszélünk magyarul. (+40-743/177.040 )

irrtum, anderungen und zwischenverkauf vorbehalten /
subject to errors, changes and prior sale /
ne rezervam dreptul la greseli, modificari si vanzare prealabila. DESCRIPTION BRAND MILLER MODEL TP 74-4 ID 7223 STATUS ACTIVE PRICE 18.000 € + VAT LOCATION BUZ?U (RO) OFFSET PRINTING MACHINE 4 COLORS MILLER TP 74 - 4, FORMAT: 50 X 70 CM WITH 2/2 OR 4/0. ALCOTRON DAMPENING SYSTEM WITH BALDWIN'S COOLING AND RE-CIRCULATION UNIT SYSTEM, QUICK ACTION PLATE CLAMPS, UNIMATIC C3 TABLE CONTROL, SPIESS FEEDER. EXWORKS. PRICE IS NEGOTIABLE. CONTACT TEL.: +40-359/175.575 FAX: +40-259/426.248 MOBIL: +40-743/177.040 ; +40-740/221.698 TECHNICAL INSPECTION CAN BE ORGANIZED AT LEAST 24 HRS BEFORE THE DUE DATE WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. (+40-740/221.698 ) HABLAMOS ESPAñOL. BESZéLüNK MAGYARUL. (+40-743/177.040 ) IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Precio: 1.799 €
Ubicación: Land-air cleaning unit "bdc-6 airlite" - mobile filter-ventilation unit, used for cleaning air from welding aerosol, fine and medium-sized dry dust particles, welding fumes and other processes involved particulate and fume emissions with particle size more than 0.3 micron.
is typcically used to clean air at welding shops at nonstationary working places.
supplied of with one or two desktop extraction arm 2, 3 or lengths with 4 meters.
"bdc-6 alirlie" employs three-stage filtration system (g2-for primary purification, f9 - fine purification, h11 - absolute purification) which let does not dust pollutants to filter pass, thereby making the working place ecologically safe for employees. in this unit, air cleaning is aided by the panel filter f9 and h11 (coal filter as option for elimination of toxic impurities, and scents).

primary purification filter is well protected by four-layer spark arrester, which excludes filter material damage during intence welding. that allows the unit use for more than 1200 hours without changing filter (depends on the pollution level). unit design allows fast filter changing for regular cleaning (which dacha filter lifetime).

advantages:

3 filtration levels:-primary g2, main f9, finishing hepa h11.
closed-cycle unit. filtration and pure air return. does not require connection to the general ventilating system. heat recovery. warm air does leave the room.
furnished with one or two desktop extraction arm lengths with 2, 3 or 4 meters. slide gate regulates the amount of extracted air. extraction arm made of metal with spark arrester with stand high temperatures and do not get melted from sparks and inflammation (contrary to plastic arm designs). air is extracted directly from smoke / welding source.
compact design.
fast filter changing.
the unit is mobile with durable wheels.
quiet fan with low vibration level.
does not require compressor.
qr code provides full documentation access.ion level). unit design allows fast filter changing for regular cleaning (which dacha filter lifetime). AIR CLEANING UNIT "BDC-6 AIRLITE" - MOBILE FILTER-VENTILATION UNIT, USED FOR CLEANING AIR FROM WELDING AEROSOL, FINE AND MEDIUM-SIZED DRY DUST PARTICLES, WELDING FUMES AND OTHER PROCESSES INVOLVED PARTICULATE AND FUME EMISSIONS WITH PARTICLE SIZE MORE THAN 0.3 MICRON. IS TYPCICALLY USED TO CLEAN AIR AT WELDING SHOPS AT NONSTATIONARY WORKING PLACES. SUPPLIED OF WITH ONE OR TWO DESKTOP EXTRACTION ARM 2, 3 OR LENGTHS WITH 4 METERS. "BDC-6 ALIRLIE" EMPLOYS THREE-STAGE FILTRATION SYSTEM (G2-FOR PRIMARY PURIFICATION, F9 - FINE PURIFICATION, H11 - ABSOLUTE PURIFICATION) WHICH LET DOES NOT DUST POLLUTANTS TO FILTER PASS, THEREBY MAKING THE WORKING PLACE ECOLOGICALLY SAFE FOR EMPLOYEES. IN THIS UNIT, AIR CLEANING IS AIDED BY THE PANEL FILTER F9 AND H11 (COAL FILTER AS OPTION FOR ELIMINATION OF TOXIC IMPURITIES, AND SCENTS). PRIMARY PURIFICATION FILTER IS WELL PROTECTED BY FOUR-LAYER SPARK ARRESTER, WHICH EXCLUDES FILTER MATERIAL DAMAGE DURING INTENCE WELDING. THAT ALLOWS THE UNIT USE FOR MORE THAN 1200 HOURS WITHOUT CHANGING FILTER (DEPENDS ON THE POLLUTION LEVEL). UNIT DESIGN ALLOWS FAST FILTER CHANGING FOR REGULAR CLEANING (WHICH DACHA FILTER LIFETIME). ADVANTAGES: 3 FILTRATION LEVELS:-PRIMARY G2, MAIN F9, FINISHING HEPA H11. CLOSED-CYCLE UNIT. FILTRATION AND PURE AIR RETURN. DOES NOT REQUIRE CONNECTION TO THE GENERAL VENTILATING SYSTEM. HEAT RECOVERY. WARM AIR DOES LEAVE THE ROOM. FURNISHED WITH ONE OR TWO DESKTOP EXTRACTION ARM LENGTHS WITH 2, 3 OR 4 METERS. SLIDE GATE REGULATES THE AMOUNT OF EXTRACTED AIR. EXTRACTION ARM MADE OF METAL WITH SPARK ARRESTER WITH STAND HIGH TEMPERATURES AND DO NOT GET MELTED FROM SPARKS AND INFLAMMATION (CONTRARY TO PLASTIC ARM DESIGNS). AIR IS EXTRACTED DIRECTLY FROM SMOKE / WELDING SOURCE. COMPACT DESIGN. FAST FILTER CHANGING. THE UNIT IS MOBILE WITH DURABLE WHEELS. QUIET FAN WITH LOW VIBRATION LEVEL. DOES NOT REQUIRE COMPRESSOR. QR CODE PROVIDES FULL DOCUMENTATION ACCESS.ION LEVEL). UNIT DESIGN ALLOWS FAST FILTER CHANGING FOR REGULAR CLEANING (WHICH DACHA FILTER LIFETIME).
Vendedor: BDC-Air
Año de construcción: usado
Precio: 1.980 €
Ubicación: Land-bdc-13-cycloneâ» dust arresting device, which has double-staged cleaning system, is designed to clean the air from cohesionless medium and coarse dry dust. because of production specifics and air - gas mixture consistence, the following versions are possible: from stainless steel, with antibacterial cover, explosion proof.

with the help of own-produced fan, the device has high capacity and high level of air cleaning from huge amount of dust, including abrasive dust.
dust clean effectiveness is not less than 95%.
due to devises simple construction, it is highly sustainable and damage-safe during the exploitation.  
â«bdc-13-cycloneâ» device is a universal small aggregates, which unites affordable price, service expenses and high air-cleaning level
based on centrifugal force usage, which appear during air-dust flow rotation inside the device, to separate coarse fraction and flows for further filtration in bags made from filter fabric.

air flow enters through incoming socket in the cylinder body where under the influence of centrifugal forces coarse fractions are thrown to bodies walls, box losing the speed and falling in swill. fine fractions are caught by bag filters which are cleaned at times with the help of hand filter regeneration system. during the time set by the program, stored air impulse bag filter, which widen and shrink - goes inside this process prevents the fractions from fixing on the filtrating material.

as a result the dust if into the bunker and cleaned air flows outside through the devices upper part.

advantages of the solution:

cheap and effective air cleaning equipment.
polymer powder painted surface.
mechanic filter regeneration.
quickly release dust-removable swill box.
compact design.
own-produced low-vibration fan.
quick change filter.
requires compressor wiring-up.
qr code, which allows to access documentation.
depending on the gas-air mixture characteristics polyester bag filter with liquid-oil-repellent surface can be used, as well as high temperature-resistant filter.
 BDC-13-CYCLONE&ACIRC;&RAQUO; DUST ARRESTING DEVICE, WHICH HAS DOUBLE-STAGED CLEANING SYSTEM, IS DESIGNED TO CLEAN THE AIR FROM COHESIONLESS MEDIUM AND COARSE DRY DUST. BECAUSE OF PRODUCTION SPECIFICS AND AIR - GAS MIXTURE CONSISTENCE, THE FOLLOWING VERSIONS ARE POSSIBLE: FROM STAINLESS STEEL, WITH ANTIBACTERIAL COVER, EXPLOSION PROOF. WITH THE HELP OF OWN-PRODUCED FAN, THE DEVICE HAS HIGH CAPACITY AND HIGH LEVEL OF AIR CLEANING FROM HUGE AMOUNT OF DUST, INCLUDING ABRASIVE DUST. DUST CLEAN EFFECTIVENESS IS NOT LESS THAN 95%. DUE TO DEVISES SIMPLE CONSTRUCTION, IT IS HIGHLY SUSTAINABLE AND DAMAGE-SAFE DURING THE EXPLOITATION. &ACIRC;&LAQUO;BDC-13-CYCLONE&ACIRC;&RAQUO; DEVICE IS A UNIVERSAL SMALL AGGREGATES, WHICH UNITES AFFORDABLE PRICE, SERVICE EXPENSES AND HIGH AIR-CLEANING LEVEL BASED ON CENTRIFUGAL FORCE USAGE, WHICH APPEAR DURING AIR-DUST FLOW ROTATION INSIDE THE DEVICE, TO SEPARATE COARSE FRACTION AND FLOWS FOR FURTHER FILTRATION IN BAGS MADE FROM FILTER FABRIC. AIR FLOW ENTERS THROUGH INCOMING SOCKET IN THE CYLINDER BODY WHERE UNDER THE INFLUENCE OF CENTRIFUGAL FORCES COARSE FRACTIONS ARE THROWN TO BODIES WALLS, BOX LOSING THE SPEED AND FALLING IN SWILL. FINE FRACTIONS ARE CAUGHT BY BAG FILTERS WHICH ARE CLEANED AT TIMES WITH THE HELP OF HAND FILTER REGENERATION SYSTEM. DURING THE TIME SET BY THE PROGRAM, STORED AIR IMPULSE BAG FILTER, WHICH WIDEN AND SHRINK - GOES INSIDE THIS PROCESS PREVENTS THE FRACTIONS FROM FIXING ON THE FILTRATING MATERIAL. AS A RESULT THE DUST IF INTO THE BUNKER AND CLEANED AIR FLOWS OUTSIDE THROUGH THE DEVICES UPPER PART. ADVANTAGES OF THE SOLUTION: CHEAP AND EFFECTIVE AIR CLEANING EQUIPMENT. POLYMER POWDER PAINTED SURFACE. MECHANIC FILTER REGENERATION. QUICKLY RELEASE DUST-REMOVABLE SWILL BOX. COMPACT DESIGN. OWN-PRODUCED LOW-VIBRATION FAN. QUICK CHANGE FILTER. REQUIRES COMPRESSOR WIRING-UP. QR CODE, WHICH ALLOWS TO ACCESS DOCUMENTATION. DEPENDING ON THE GAS-AIR MIXTURE CHARACTERISTICS POLYESTER BAG FILTER WITH LIQUID-OIL-REPELLENT SURFACE CAN BE USED, AS WELL AS HIGH TEMPERATURE-RESISTANT FILTER.
Vendedor: BDC-Air
Año de construcción: usado
Ubicación: Land-van dam 620-8 uv high speed 600 cups/ min, 8-color cup printing line:-
auto elevator tray feeder
auto-cross conveyor feeder
standard van dam ?goose neck? infeed
universal screw denester
mandrel spin system, mandrel rotation control
softal 6215 corona pretreater with leak tester 
main 8-color print unit. modern new style print heads
each print head consisting of : 8 x precision ground rollers. 
 2 x oscillating rollers & fountain roller - water cooled. 
gear driven fountain rollers. 
all eight heads swing open for easy plate mounting and free roller accessibility. 
all pressure and register adjustment can be made while printer is running.
easy access to product handling areas and print area
no cup no print system.
double cup detection
8.8 kw main siemens midimaster vector inverter drive. speed continuously variable. 
uv-on mandrel curing system. uviterno mono-jumbo 8015
dual timing belt take-off
exact count, dual screw counter/ stacker unit, with ejector tray
central lubrication system
min./ max. product height 30 – 150 mm
min/ max. cup-rim diameter 50 – 135 mm
max. printing length 415 mm
max. printing width 150 mm
min./max. taper 0 - 12°
max. production speed 600 cups/ min.
ocp with touch pad controls and display.
klockner moeller ps416 plc controls
400v 3ph 50hz
ce-certification
auto lubrication system
*printer can print with standard dry offset it also has additional features to print with toray printing plates using waterless printing inks   VAN DAM 620-8 UV HIGH SPEED 600 CUPS/ MIN, 8-COLOR CUP PRINTING LINE:- AUTO ELEVATOR TRAY FEEDER AUTO-CROSS CONVEYOR FEEDER STANDARD VAN DAM ?GOOSE NECK? INFEED UNIVERSAL SCREW DENESTER MANDREL SPIN SYSTEM, MANDREL ROTATION CONTROL SOFTAL 6215 CORONA PRETREATER WITH LEAK TESTER MAIN 8-COLOR PRINT UNIT. MODERN NEW STYLE PRINT HEADS EACH PRINT HEAD CONSISTING OF : 8 X PRECISION GROUND ROLLERS. 2 X OSCILLATING ROLLERS & FOUNTAIN ROLLER - WATER COOLED. GEAR DRIVEN FOUNTAIN ROLLERS. ALL EIGHT HEADS SWING OPEN FOR EASY PLATE MOUNTING AND FREE ROLLER ACCESSIBILITY. ALL PRESSURE AND REGISTER ADJUSTMENT CAN BE MADE WHILE PRINTER IS RUNNING. EASY ACCESS TO PRODUCT HANDLING AREAS AND PRINT AREA NO CUP NO PRINT SYSTEM. DOUBLE CUP DETECTION 8.8 KW MAIN SIEMENS MIDIMASTER VECTOR INVERTER DRIVE. SPEED CONTINUOUSLY VARIABLE. UV-ON MANDREL CURING SYSTEM. UVITERNO MONO-JUMBO 8015 DUAL TIMING BELT TAKE-OFF EXACT COUNT, DUAL SCREW COUNTER/ STACKER UNIT, WITH EJECTOR TRAY CENTRAL LUBRICATION SYSTEM MIN./ MAX. PRODUCT HEIGHT 30 – 150 MM MIN/ MAX. CUP-RIM DIAMETER 50 – 135 MM MAX. PRINTING LENGTH 415 MM MAX. PRINTING WIDTH 150 MM MIN./MAX. TAPER 0 - 12° MAX. PRODUCTION SPEED 600 CUPS/ MIN. OCP WITH TOUCH PAD CONTROLS AND DISPLAY. KLOCKNER MOELLER PS416 PLC CONTROLS 400V 3PH 50HZ CE-CERTIFICATION AUTO LUBRICATION SYSTEM *PRINTER CAN PRINT WITH STANDARD DRY OFFSET IT ALSO HAS ADDITIONAL FEATURES TO PRINT WITH TORAY PRINTING PLATES USING WATERLESS PRINTING INKS
Vendedor: SAMPLAST INC.
Año de construcción: usado
Ubicación: Land-perfecting 2/3, 5/0
coater tower
prinect axis control
prinect center with remote control of ink zones, ink fountain roller as well lateral, circumferential and diagonal register, with light pen, job memory card and touch screen
alcolor damping with circulation and refrigeration
autoplate semi-automatic plate change
automatic ink roller wash-up device
automatic blanket and impression cylinder wash-up device
staticstar advanced
powder sprayer exatronic
ir-dryer drystar 2000
high pile delivery
serial equipment
 PERFECTING 2/3, 5/0 COATER TOWER PRINECT AXIS CONTROL PRINECT CENTER WITH REMOTE CONTROL OF INK ZONES, INK FOUNTAIN ROLLER AS WELL LATERAL, CIRCUMFERENTIAL AND DIAGONAL REGISTER, WITH LIGHT PEN, JOB MEMORY CARD AND TOUCH SCREEN ALCOLOR DAMPING WITH CIRCULATION AND REFRIGERATION AUTOPLATE SEMI-AUTOMATIC PLATE CHANGE AUTOMATIC INK ROLLER WASH-UP DEVICE AUTOMATIC BLANKET AND IMPRESSION CYLINDER WASH-UP DEVICE STATICSTAR ADVANCED POWDER SPRAYER EXATRONIC IR-DRYER DRYSTAR 2000 HIGH PILE DELIVERY SERIAL EQUIPMENT
Vendedor: Black Horse Machinery, S.L.
Año de construcción: usado
Ubicación: Land-4500 w vodou chladená xenónová oblúková lampa
celková expozícia 2 188 cm2 (339 in2)
tft farebný 12 4500 W VODOU CHLADENá XENóNOVá OBLúKOVá LAMPA CELKOVá EXPOZíCIA 2 188 CM2 (339 IN2) TFT FAREBNý 12 "DOTYKOVý DISPLEJ OVLáDACIEHO PANELA ZOBRAZUJE VšETKY TESTOVACIE PARAMETRE PRIAME NASTAVENIE A OVLáDANIE TEPLOTY ?IERNEHO PANELU; NEIZOLOVANé (BPT) ALEBO IZOLOVANé (BST) PRIAME NASTAVENIE A REGULáCIA RELATíVNEJ VLHKOSTI PRIAME NASTAVENIE A RIADENIE TEPLOTY VZDUCHU V KOMORE VZORKY ZOBRAZENIE DIAGNOSTICKýCH SPRáV 14 VýROBNýCH PREDPROGRAMOVANýCH TESTOVACíCH METóD (WEATHER-OMETER); 6 VýROBNýCH PREDPROGRAMOVANýCH TESTOVACíCH METóD (FADE-OMETER) PRIESTOR PRE 12 VLASTNýCH PROGRAMOV; SCHOPNOS? SUB-CYKLU VIACJAZY?Né SCHOPNOSTI (ANGLI?TINA, FRANCúZšTINA, NEM?INA, šPANIEL?INA, JAPON?INA, ?íNšTINA, KóREJ?INA, TURE?TINA) STREAMOVANIE DáTOVýCH DáT CEZ ETHERNET ALEBO USB PORT. Sú?AS?OU BALENIA JE AJ USB DISK SMARTDAMPERTM NA ZNížENIE TESTOVACEJ VARIABILITY TEPLOTY A VLHKOSTI KOMORY A KOMPENZUJE ZMENY OKOLITýCH LABORATóRNYCH PODMIENOK SMARTLIGHT MONITORTM OVERí, ?I JE NAINšTALOVANá SPRáVNA SVETELNá KAPSULA K DISPOZíCII Sú KOMBINáCIE FILTROV, KTORé SP??AJú VšETKY BEžNé TESTOVACIE METóDY VZDUCHOVý FILTER NA NASáVANIE VZDUCHU CS-7 CHLADIACI SYSTéM XENóNOVEJ LAMPY OBRAZOVé OKNO PRE POSEDENIE VO DVERáCH UNIVERZáLNE ELEKTRICKé KONFIGURáCIE NA SPLNENIE MIESTNYCH POžIADAVIEK NA FREKVENCIU, NAPäTIE A ELEKTRICKé POžIADAVKY SP??A BEZPE?NOSTNé POžIADAVKY CE, UL, ISO EN A CSA AUTOMATICKé ODPO?íTAVANIE TESTOV NA ZáKLADE ?ASU ALEBO SáLAVéHO OžIARENIA SYSTéM ZVLH?OVANIA VIBRASONIC ™ K DISPOZíCII Sú DRžIAKY VZORIEK, KTORé VYHOVUJú MNOHýM TYPOM VZORIEK KALIBROVANá XENóNOVá REFEREN?Ná LAMPA INDIKáTOR ?ISTOTY VODY
Vendedor: BASTA
Año de construcción: usado
Precio: 55.000 €
Ubicación: Land-this machine was our 'laboratory machine'... with little operating hours (ca. 1000) made in germany

the sorting system was developed especially efficiently to ensure the separation of metals or the removal of disturbing metals. the sensor system is composed of various data THIS MACHINE WAS OUR 'LABORATORY MACHINE'... WITH LITTLE OPERATING HOURS (CA. 1000) MADE IN GERMANY THE SORTING SYSTEM WAS DEVELOPED ESPECIALLY EFFICIENTLY TO ENSURE THE SEPARATION OF METALS OR THE REMOVAL OF DISTURBING METALS. THE SENSOR SYSTEM IS COMPOSED OF VARIOUS DATA "THUMBNAIL" OVER DISCARDED METAL PARTICLES. THESE 'PICTURES' ARE SO SPECIFIC TO MANY METALS THAT THEY PURPOSEFULLY BE CAN REMOVED. THE SENSOR DOES NOT DETECT NON-METALS. THE REMOVAL IS CARRIED OUT BY MEANS OF COMPRESSED AIR FROM THE FLOW OF MATERIAL. DUE TO ITS COMPACT DIMENSIONS AND THROUGHPUT, THE SYSTEM AS A COMPONENT OF A CASCADE CAN USUALLY EASILY BE IMPLEMENTED IN EXISTING PLANTS. THE SYSTEM IS EXTREMELY ROBUST. THROUGHPUT: UP TO APPROX. 30 M3 PER HOUR WORKING WIDTH: 900 MM EXTERNAL DIMENSIONS: 4200X1200X2000MM WEIGHT: APPROX. 1.1T FOLLOWING METALS ARE RECOGNIZED: BASICALLY THE SENSORS DIFFERENT ACCURATELY WHETHER A PIECE OF METAL. VARNISHES, OXIDATION OR OTHER ATTACHMENTS ARE IRRELEVANT FOR THE RECOGNITION. SOME METALS OR RECURRING COMPOSITES CAN BE SAFELY RECOGNIZED BUT ALSO FROM THE FLOW OF METALS. THESE ARE IN PARTICULAR:-VA IN -VA WITH FE -NON-FERROUS METALS AS A MIXTURE -STRONG MAGNETISABLE METALS (RUST, FE) -MAGNETIC (WASHING MACHINE STONES) -IN ADDITION, PCBS ARE DETECTED COMMON APPLICATIONS FROM THE ABILITY TO RECOGNIZE ABOVE MENTIONED SUBSTANCES AND THIS ALSO AGAINST EACH OTHER TO HIDE THE POSSIBILITY OF THREE FUNDAMENTAL FIELDS OF APPLICATION ARISE. 1. CONCENTRATION OF METALS THE AIM IS THE EXTRACTION OF METAL FRACTIONS IN HIGH PURITY. APPLICATIONS ARE: 1.VA RECOVERY FROM SHREDDER-LIGHT - OR - HEAVY FRACTIONS 2.NON-FERROUS METAL PRODUCTION IN SUBSEQUENT CIRCUIT AFTER A EDDY-CURRENT-SYSTEM 3.TREATMENT OF SWIM SINK FRACTIONS, TO REMOVE WASHING MACHINE STONES. 4.CONCENTRATION OF ORES 5.METAL EXTRACTION FROM WASTE PRODUCTS, IN PARTICULAR NON-FERROUS METALS AND VA 2. DISCHARGE OF FRACTIONS THIS TASK IS TO GET OUT METALS PROVIDES LIKE DISTURBING MATERIAL THAT MUST BE REMOVED FROM A MIXED FRACTION. TYPICAL APPLICATIONS ARE: 1. PROCESSING OF WASTE GLASS 2. PROCESSING OF WOOD 3. DISCHARGE ACTIVITY OF LANDFILL WASTE, E.G. SLAG 4. DISCHARGE ACTIVITY OF RECYCLING PLASTICS 5. EBS PREPARATION 3: ELECTRIC SCRAP RECYCLING POSSIBLE APPLICATIONS ARE: 1. DISCONNECT THE METALS 2. REMOVE NOISE METALS FROM THE NON-FERROUS METALS 3. BOARDS WE CAN HELP FOR START-UP ... BUT IS NOT INCLUDED IN PRICE.
Vendedor: Fortytwo Energies GmbH
Año de construcción: usado
Precio: 599 €
Ubicación: Land-your contact person in our home:<br/>  <br/>  mr: andré evening<br/>  mr: marcel brahms<br/>  mr: simon blank<br/>  <br/>  -free shipping - nationwide-<br/>   (inseltransport not included) <br/>  <br/>   <br/>  <br/>  we offer you here a used pallet rack system for sale.<br/>  it is a residual item / special items.<br/>  <br/>  palette racks have been before picked already and the packages are<br/>  taken from above, i.e. it cannot be determined in advance; what manufacturer you buy.<br/>  <br/>  you get uniform packages, i.e. from a manufacturer with a uniform depth, and with a uniform load capacity.<br/>  <br/>  the materials in these packages are technically impeccable, i.e. you will receive<br/>  also refer to the required load signs for the trade association.<br/>  <br/>  rust approaches, dings or light damage, which have no effect on the statics of the rack, can be present.<br/>  <br/>  technical specifications of the pallet shelf system:<br/>    <br/>  shelf system: n. available type: n. available<br/>  year of constr.: n. available<br/>    <br/>  technical specifications of the site: number of rows of shelves: 01 pcs.<br/>  length per rack range: about 13,100 15,600 mm<br/>  number of fields per shelf number: 05 pcs. à 2,500-3,000 mm number levels plus ground level: 02 pcs.<br/>   <br/>  <br/>  technical data volume: number of pallet places per box: 09 pcs.<br/>  number of pallet places per row: 45 stc YOUR CONTACT PERSON IN OUR HOME:

MR: ANDRé EVENING
MR: MARCEL BRAHMS
MR: SIMON BLANK

-FREE SHIPPING - NATIONWIDE-
(INSELTRANSPORT NOT INCLUDED)



WE OFFER YOU HERE A USED PALLET RACK SYSTEM FOR SALE.
IT IS A RESIDUAL ITEM / SPECIAL ITEMS.

PALETTE RACKS HAVE BEEN BEFORE PICKED ALREADY AND THE PACKAGES ARE
TAKEN FROM ABOVE, I.E. IT CANNOT BE DETERMINED IN ADVANCE; WHAT MANUFACTURER YOU BUY.

YOU GET UNIFORM PACKAGES, I.E. FROM A MANUFACTURER WITH A UNIFORM DEPTH, AND WITH A UNIFORM LOAD CAPACITY.

THE MATERIALS IN THESE PACKAGES ARE TECHNICALLY IMPECCABLE, I.E. YOU WILL RECEIVE
ALSO REFER TO THE REQUIRED LOAD SIGNS FOR THE TRADE ASSOCIATION.

RUST APPROACHES, DINGS OR LIGHT DAMAGE, WHICH HAVE NO EFFECT ON THE STATICS OF THE RACK, CAN BE PRESENT.

TECHNICAL SPECIFICATIONS OF THE PALLET SHELF SYSTEM:

SHELF SYSTEM: N. AVAILABLE TYPE: N. AVAILABLE
YEAR OF CONSTR.: N. AVAILABLE

TECHNICAL SPECIFICATIONS OF THE SITE: NUMBER OF ROWS OF SHELVES: 01 PCS.
LENGTH PER RACK RANGE: ABOUT 13,100 15,600 MM
NUMBER OF FIELDS PER SHELF NUMBER: 05 PCS. à 2,500-3,000 MM NUMBER LEVELS PLUS GROUND LEVEL: 02 PCS.


TECHNICAL DATA VOLUME: NUMBER OF PALLET PLACES PER BOX: 09 PCS.
NUMBER OF PALLET PLACES PER ROW: 45 STC
Vendedor: Lücht & Palm GmbH
Año de construcción: usado
Precio: 500 €
Ubicación: Land-incl. switching channel for both summer and winter operation, execution, return air duct galvanized abm. 900 x 900 mm x length = 2 x 1000 mm, abm. 800 x 1000 mm x length = 1 x 1200 mm and 1 x 2000 mm, abm. 1000 x 1000 mm x length = 4 x 2000 mm, switching channel abm. channel 1000 x 1000 mm, channel width (with multi-leaf dampers) 1600 mm INCL. SWITCHING CHANNEL FOR BOTH SUMMER AND WINTER OPERATION, EXECUTION, RETURN AIR DUCT GALVANIZED ABM. 900 X 900 MM X LENGTH = 2 X 1000 MM, ABM. 800 X 1000 MM X LENGTH = 1 X 1200 MM AND 1 X 2000 MM, ABM. 1000 X 1000 MM X LENGTH = 4 X 2000 MM, SWITCHING CHANNEL ABM. CHANNEL 1000 X 1000 MM, CHANNEL WIDTH (WITH MULTI-LEAF DAMPERS) 1600 MM
Vendedor: MELCHIOR MASCHINEN E.K.
Año de construcción: usado
Precio: 1.250 €
Ubicación: Land-chip fan<br/>  250mm stem<br/>  5.5 kw<br/>  soundproof<br/>  4. 940m ³/h<br/>  steel fan<br/>  galvanized steel housing CHIP FAN
250MM STEM
5.5 KW
SOUNDPROOF
4. 940M ³/H
STEEL FAN
GALVANIZED STEEL HOUSING
Vendedor: Jürgen Oldach - Werkzeuge und Maschinen
Año de construcción: usado
Precio: 5.800 €
Ubicación: Land-description
brand	gildemeister max muller
model	md 5s
id	7117
status	active
price	5.800 € + vat
year of manufacture	1982
location	zalau, romania

cnc lathe, gildemeister max muller md 5s manufactured in 1982, control eltropilot m, center height 351 mm, swing over bed 595, diameter without collision viewing 250 mm, max. machining diameter 400 mm, turning length 1050 mm, distance between centers 1000 mm, spindle bore 50 mm, drive power 25 kw, spindle speed 20-4000 u / min, feeding plan / laengs 5 m / min, rapid traverse 10 m / min, universal turret for 12 tools, clamping cylinder hydraulically. chuck 250 mm. power chuck berg hesf 315/32. chip conveyor. coolant system. 
 
circuit board is damaged. 
 
exworks bucharest, romania. price is negotiable.

contact
tel.: +40-359/175.575
fax: +40-259/426.248
mobil: +40-743/177.040 ; +40-740/221.698

technical inspection can be organized at least 24 hrs before the due date

we speak english. wir sprechen deutsch. (+40-740/221.698 )
hablamos español. beszélünk magyarul. (+40-743/177.040 )

irrtum, anderungen und zwischenverkauf vorbehalten /
subject to errors, changes and prior sale /
ne rezervam dreptul la greseli, modificari si vanzare prealabila DESCRIPTION BRAND GILDEMEISTER MAX MULLER MODEL MD 5S ID 7117 STATUS ACTIVE PRICE 5.800 € + VAT YEAR OF MANUFACTURE 1982 LOCATION ZALAU, ROMANIA CNC LATHE, GILDEMEISTER MAX MULLER MD 5S MANUFACTURED IN 1982, CONTROL ELTROPILOT M, CENTER HEIGHT 351 MM, SWING OVER BED 595, DIAMETER WITHOUT COLLISION VIEWING 250 MM, MAX. MACHINING DIAMETER 400 MM, TURNING LENGTH 1050 MM, DISTANCE BETWEEN CENTERS 1000 MM, SPINDLE BORE 50 MM, DRIVE POWER 25 KW, SPINDLE SPEED 20-4000 U / MIN, FEEDING PLAN / LAENGS 5 M / MIN, RAPID TRAVERSE 10 M / MIN, UNIVERSAL TURRET FOR 12 TOOLS, CLAMPING CYLINDER HYDRAULICALLY. CHUCK 250 MM. POWER CHUCK BERG HESF 315/32. CHIP CONVEYOR. COOLANT SYSTEM. CIRCUIT BOARD IS DAMAGED. EXWORKS BUCHAREST, ROMANIA. PRICE IS NEGOTIABLE. CONTACT TEL.: +40-359/175.575 FAX: +40-259/426.248 MOBIL: +40-743/177.040 ; +40-740/221.698 TECHNICAL INSPECTION CAN BE ORGANIZED AT LEAST 24 HRS BEFORE THE DUE DATE WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. (+40-740/221.698 ) HABLAMOS ESPAñOL. BESZéLüNK MAGYARUL. (+40-743/177.040 ) IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Precio: 230 €
Ubicación: -restpostem hilti würth of mapress stauf wmw siemens moeler
-16 x band clamps designation system würth 102 x 52 mm
-22 pcs screw din 912 zinc m10 x 150
-belimo nf24a-s2 spring return actuator, damper actuator, on-off, ac/dc 24 v, 10 nm, with 2 integrated auxiliary contacts
-damper trox jz-g 120 x 90 x 12 air outlet flap ventilation grille
-damper trox jz-g 60 x 90 x 12 air outlet flap ventilation grille
-11 x hatchways metu.gif" alt="Land-we offer
from a business resolution

standard parts fitinge hilti > 550 parts

condition: from camp, unused, ready for action, ovp, photos see

hilti clamps connection mm s m10 - 418761 - ca. 65
hilti clamps connection mm-s m8 - 418761 - ca. 40 pieces
hilti mqa m8 rail system quick links about 9 pieces
hilti mqa m10 rail system quick access approximately 59 units
hilti nails x-edni 16p8 for nail gun ca. 300 pieces (3 pack)
hilti clamps connection mqa-m16-r mqa-m16-r 11 pcs
hilti quick connector for rail mounting msa m10 9 pieces
in sum > 400 parts
weight: 11 kg
hiltipreis: eur750

furthermore we offer:

-3 x 3 hole angle mqw-4-f 90° orig hilti hot-dip galvanized
-9 x 4-hole angle mqw-4-f 90° orig hilti hot-dip galvanized
-14 x electric welding sleeve geberit pe-hd 55-110 mm (2 x of
-1450 x washer stauff, 11.6 x 6.5 x 0.8 us w3,.
-9 x fixed clamp post clamp müpro 1 1/4 "o.e. 40-43.
-restpostem hilti würth of mapress stauf wmw siemens moeler
-16 x band clamps designation system würth 102 x 52 mm
-22 pcs screw din 912 zinc m10 x 150
-belimo nf24a-s2 spring return actuator, damper actuator, on-off, ac/dc 24 v, 10 nm, with 2 integrated auxiliary contacts
-damper trox jz-g 120 x 90 x 12 air outlet flap ventilation grille
-damper trox jz-g 60 x 90 x 12 air outlet flap ventilation grille
-11 x hatchways metu" style="height: 18px;"> WE OFFER
FROM A BUSINESS RESOLUTION

STANDARD PARTS FITINGE HILTI > 550 PARTS

CONDITION: FROM CAMP, UNUSED, READY FOR ACTION, OVP, PHOTOS SEE

HILTI CLAMPS CONNECTION MM S M10 - 418761 - CA. 65
HILTI CLAMPS CONNECTION MM-S M8 - 418761 - CA. 40 PIECES
HILTI MQA M8 RAIL SYSTEM QUICK LINKS ABOUT 9 PIECES
HILTI MQA M10 RAIL SYSTEM QUICK ACCESS APPROXIMATELY 59 UNITS
HILTI NAILS X-EDNI 16P8 FOR NAIL GUN CA. 300 PIECES (3 PACK)
HILTI CLAMPS CONNECTION MQA-M16-R MQA-M16-R 11 PCS
HILTI QUICK CONNECTOR FOR RAIL MOUNTING MSA M10 9 PIECES
IN SUM > 400 PARTS
WEIGHT: 11 KG
HILTIPREIS: EUR750

FURTHERMORE WE OFFER:

-3 X 3 HOLE ANGLE MQW-4-F 90° ORIG HILTI HOT-DIP GALVANIZED
-9 X 4-HOLE ANGLE MQW-4-F 90° ORIG HILTI HOT-DIP GALVANIZED
-14 X ELECTRIC WELDING SLEEVE GEBERIT PE-HD 55-110 MM (2 X OF
-1450 X WASHER STAUFF, 11.6 X 6.5 X 0.8 US W3,.
-9 X FIXED CLAMP POST CLAMP MüPRO 1 1/4 "O.E. 40-43.
-RESTPOSTEM HILTI WüRTH OF MAPRESS STAUF WMW SIEMENS MOELER
-16 X BAND CLAMPS DESIGNATION SYSTEM WüRTH 102 X 52 MM
-22 PCS SCREW DIN 912 ZINC M10 X 150
-BELIMO NF24A-S2 SPRING RETURN ACTUATOR, DAMPER ACTUATOR, ON-OFF, AC/DC 24 V, 10 NM, WITH 2 INTEGRATED AUXILIARY CONTACTS
-DAMPER TROX JZ-G 120 X 90 X 12 AIR OUTLET FLAP VENTILATION GRILLE
-DAMPER TROX JZ-G 60 X 90 X 12 AIR OUTLET FLAP VENTILATION GRILLE
-11 X HATCHWAYS METU
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Ubicación: Land-with cycle control bj. 2003 (original box unused)<br/>  <br/>  on the storage conveyor with 4 stations, packages, newspaper, magazines and similar batch print products be dammed if needed and after release time eingetaktet delayed.<br/>   <br/>  advantage:<br/>  the handle between the straps allows a manual acceptance by batches.<br/>   <br/>  frequenzumfomer adjustable transportation speed<br/>  unpackaged products 30m / min and packaged products 50m / min.<br/>   <br/>  length 4 cm x 50cm<br/>  nominal width 400 mm<br/>  handle 85 mm wide and 25 mm deep working height 850 mm +/-50 mm; new WITH CYCLE CONTROL BJ. 2003 (ORIGINAL BOX UNUSED)

ON THE STORAGE CONVEYOR WITH 4 STATIONS, PACKAGES, NEWSPAPER, MAGAZINES AND SIMILAR BATCH PRINT PRODUCTS BE DAMMED IF NEEDED AND AFTER RELEASE TIME EINGETAKTET DELAYED.

ADVANTAGE:
THE HANDLE BETWEEN THE STRAPS ALLOWS A MANUAL ACCEPTANCE BY BATCHES.

FREQUENZUMFOMER ADJUSTABLE TRANSPORTATION SPEED
UNPACKAGED PRODUCTS 30M / MIN AND PACKAGED PRODUCTS 50M / MIN.

LENGTH 4 CM X 50CM
NOMINAL WIDTH 400 MM
HANDLE 85 MM WIDE AND 25 MM DEEP WORKING HEIGHT 850 MM +/-50 MM; NEW
Vendedor: 3p Vertriebsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-spectrodens is your all-purpose, modern measurement device for every application ? from pre-press to print. whether it be in pre-print for verifying proofs, for ongoing quality control at the printing press, during delivery inspection of paper and print products or in a color lab, spectrodens is exceptionally suitable, whatever your application. <br><br/> <br><br/> <br>spectrodens basic<br/> <br>functions:<br/> <br>+ automatic measurement<br/> <br>+ density cmyk<br/> <br>+ dot area,dot gain<br/> <br>+ gray and color balance<br/> <br>+ ink trapping to preucil<br/> <br>+ print contrast<br/> <br><br/> <br><br/> <br>fundamental advantages:<br/> <br>+ patented measurement head for exact and direct positioning<br/> <br>+ attractive, ergonomic design<br/> <br>+ handy and compact<br/> <br>+ self-explanatory operation<br/> <br>+ large, high-resolution display screen<br/> <br><br/> <br>+ automatic measurement function displays always the relevant values<br/> <br>+ polarization filter insertable by push of a button<br/> <br>+ precise, quick measurement (approx. 1 sec.)<br/> <br>+ approx. 10,000 measurements per battery charge<br/> <br>+ quick recharge on practical charging console<br/> <br>; good SPECTRODENS IS YOUR ALL-PURPOSE, MODERN MEASUREMENT DEVICE FOR EVERY APPLICATION ? FROM PRE-PRESS TO PRINT. WHETHER IT BE IN PRE-PRINT FOR VERIFYING PROOFS, FOR ONGOING QUALITY CONTROL AT THE PRINTING PRESS, DURING DELIVERY INSPECTION OF PAPER AND PRINT PRODUCTS OR IN A COLOR LAB, SPECTRODENS IS EXCEPTIONALLY SUITABLE, WHATEVER YOUR APPLICATION.




SPECTRODENS BASIC

FUNCTIONS:

+ AUTOMATIC MEASUREMENT

+ DENSITY CMYK

+ DOT AREA,DOT GAIN

+ GRAY AND COLOR BALANCE

+ INK TRAPPING TO PREUCIL

+ PRINT CONTRAST





FUNDAMENTAL ADVANTAGES:

+ PATENTED MEASUREMENT HEAD FOR EXACT AND DIRECT POSITIONING

+ ATTRACTIVE, ERGONOMIC DESIGN

+ HANDY AND COMPACT

+ SELF-EXPLANATORY OPERATION

+ LARGE, HIGH-RESOLUTION DISPLAY SCREEN



+ AUTOMATIC MEASUREMENT FUNCTION DISPLAYS ALWAYS THE RELEVANT VALUES

+ POLARIZATION FILTER INSERTABLE BY PUSH OF A BUTTON

+ PRECISE, QUICK MEASUREMENT (APPROX. 1 SEC.)

+ APPROX. 10,000 MEASUREMENTS PER BATTERY CHARGE

+ QUICK RECHARGE ON PRACTICAL CHARGING CONSOLE

; GOOD
Vendedor: 3p Vertriebsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-molton damp roller washing machines<br/> <br>the most important advantages:<br/> <br>rollers can be cleaned by using only water<br/> <br>maximum durability and life span of covers<br/> <br>drying of covers without manual treatment<br/> <br>extreme short cleaning times; good MOLTON DAMP ROLLER WASHING MACHINES

THE MOST IMPORTANT ADVANTAGES:

ROLLERS CAN BE CLEANED BY USING ONLY WATER

MAXIMUM DURABILITY AND LIFE SPAN OF COVERS

DRYING OF COVERS WITHOUT MANUAL TREATMENT

EXTREME SHORT CLEANING TIMES; GOOD
Vendedor: 3p Vertriebsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-make: trump card
type: tc 600 l - 1600
year of manufacture: 03/2001
maximum working range x-y: 3085 x 1740 mm
laser power: 2400 watts
control: siemens sinumerik 840 d
hours of operation: 75079/74702/19805 (30.08.2017)
punching power: 22 to
positioning range combines: 2585 x 1650 mm
positioning range laser operation: 3085 x 1650 mm
stanzbetgrieb travel range: 3085 x 1740 mm
maximum sheet thickness: 8 mm
maximum punching diameter: 76.2 mm
maximum workpiece weight: 230 kg
max speed: 90/60/108 m / min
number of tool stations: 17
number of clamps: 4
length: 7500 mm
width: 8700 mm
height: 2400 mm
: weight 22500

standard equipment
-sturdy c frame
-coordinate guide with integrated linear magazine
-drives: maintenance-free three-phase servomotors
-hi-las high pressure cutting
-laser cutting head with 5 "lens
-laser cutting head with 7.5 "lens
-capacitive treble slides iii
-programmable cutting gas selection/pressure adjustment
-slag cone detection
-programmable power cycles
-contourlas
-logbook function laser
-compact dust collection
-rotating tool holder
-automatic designation system with retainer
-automatic tool changer with 18 stations
-3 clamps
-2 automatic part slides for parts of each 500 x 500 mm
-sensor for both part slides
-2 parts crates
-tool spray lubrication
-2 lubricant containers
-punching slug extraction
-chip bucket
-emergency shut-down hydraulic
-tank heater
-external control console
-3 drawers and shelf on the control panel
-automatic switch-off
-safety light barrier
-3.5 "floppy disk drive
-bnc and rj45 network connector

advanced facilities
-laser tlf 2400 turbo
multi tool control
-function thread forming
-function sign
-soft punch
-designation cylinder
-vibration-damped installation
-blow gun
-bulge detection

automation
-preparation for retrofit automation

MAKE: TRUMP CARD TYPE: TC 600 L - 1600 YEAR OF MANUFACTURE: 03/2001 MAXIMUM WORKING RANGE X-Y: 3085 X 1740 MM LASER POWER: 2400 WATTS CONTROL: SIEMENS SINUMERIK 840 D HOURS OF OPERATION: 75079/74702/19805 (30.08.2017) PUNCHING POWER: 22 TO POSITIONING RANGE COMBINES: 2585 X 1650 MM POSITIONING RANGE LASER OPERATION: 3085 X 1650 MM STANZBETGRIEB TRAVEL RANGE: 3085 X 1740 MM MAXIMUM SHEET THICKNESS: 8 MM MAXIMUM PUNCHING DIAMETER: 76.2 MM MAXIMUM WORKPIECE WEIGHT: 230 KG MAX SPEED: 90/60/108 M / MIN NUMBER OF TOOL STATIONS: 17 NUMBER OF CLAMPS: 4 LENGTH: 7500 MM WIDTH: 8700 MM HEIGHT: 2400 MM : WEIGHT 22500 STANDARD EQUIPMENT -STURDY C FRAME -COORDINATE GUIDE WITH INTEGRATED LINEAR MAGAZINE -DRIVES: MAINTENANCE-FREE THREE-PHASE SERVOMOTORS -HI-LAS HIGH PRESSURE CUTTING -LASER CUTTING HEAD WITH 5 "LENS -LASER CUTTING HEAD WITH 7.5 "LENS -CAPACITIVE TREBLE SLIDES III -PROGRAMMABLE CUTTING GAS SELECTION/PRESSURE ADJUSTMENT -SLAG CONE DETECTION -PROGRAMMABLE POWER CYCLES -CONTOURLAS -LOGBOOK FUNCTION LASER -COMPACT DUST COLLECTION -ROTATING TOOL HOLDER -AUTOMATIC DESIGNATION SYSTEM WITH RETAINER -AUTOMATIC TOOL CHANGER WITH 18 STATIONS -3 CLAMPS -2 AUTOMATIC PART SLIDES FOR PARTS OF EACH 500 X 500 MM -SENSOR FOR BOTH PART SLIDES -2 PARTS CRATES -TOOL SPRAY LUBRICATION -2 LUBRICANT CONTAINERS -PUNCHING SLUG EXTRACTION -CHIP BUCKET -EMERGENCY SHUT-DOWN HYDRAULIC -TANK HEATER -EXTERNAL CONTROL CONSOLE -3 DRAWERS AND SHELF ON THE CONTROL PANEL -AUTOMATIC SWITCH-OFF -SAFETY LIGHT BARRIER -3.5 "FLOPPY DISK DRIVE -BNC AND RJ45 NETWORK CONNECTOR ADVANCED FACILITIES -LASER TLF 2400 TURBO MULTI TOOL CONTROL -FUNCTION THREAD FORMING -FUNCTION SIGN -SOFT PUNCH -DESIGNATION CYLINDER -VIBRATION-DAMPED INSTALLATION -BLOW GUN -BULGE DETECTION AUTOMATION -PREPARATION FOR RETROFIT AUTOMATION
Vendedor: AGM- Rühle GmbH
Año de construcción: usado
Ubicación: Land-make: trump card
type: trumatic 6000 l - 1600 fmc
year of built: 07/2007
maximum working range x-y: 3085 x 1740 mm
laser power: 3200 watts
control: siemens sinumerik 840 d
hours of operation: 52328/52410/10903 (06/2017)
punching power: 22 to
positioning range combines: 2585 x 1650 mm
positioning range laser operation: 3085 x 1650 mm
positioning range punch operation: 3085 x 1740 mm
maximum sheet thickness: 8 mm
maximum punching diameter: 76.2 mm
maximum workpiece weight: 230 kg
max speed: 90/60/108 m / min
number of tool stations: 17
number of clamps: 4
length: 7900 mm
width: 9100 mm
height: 2400 mm
weight: 23500 kg

standard equipment - sturdy c frame
-coordinate guide with integrated linear magazine
-21 places for tools and clamps
-3 clamps
-drives: maintenance-free three-phase servomotors
-programmable presser to the repositioning with adjustable down holder force
-sensor-controlled part slides 500 x 500 mm for punching and laser station, expression cylinder on laser slide
-2 good slide
-laseraggreagat: hochfrequenzangeregter co2 laser truflow 2000,
vibration-isolated, integrated in machine frame, including
cooling unit and laser control tasc 3
-nitroline high pressure cutting
-fast processing with sprintline
-contourline for making small holes
-cutting gas pressure setting can be programmed
-laser cutting head: 5 "-lens, quick change facility, distance control controlline"
-solar
-additional cutting head with 7.5 "lens
-punching head: hydraulic mono tool holder, 360 â° rotation for all tools, automatic tool length compensation,
tool spray lubrication, 2. lubricant containers, lifting and
thread counter, punching slug extraction, chip buckets
-control: sinumerik 840 d, tft colour monitor 10,4 ", simple
operation, online help, diagnostics, maintenance logbook, technology data order tables, teleservice, 3.5 "-floppy drive"
rj45 network connector
-security: mehrstrahlige photocells, emergency shut-down linkage,
extraction and compact dust extractor, protection against scattered radiation
on the cutting head

advanced facilities
-truflow 3200 includes cutting head with 9 "lens for stainless steel
-focusline
-function multotool
-function multibend
-function thread forming
signing / fast beading
-function role technology
-function soft punch
-adaptive stroke calibration
-stripline
-1 additional clamping claw
-designation cylinder
-vibration-damped installation
-automatic switch-off
-chip conveyor with tilt tray
-blowing device hardware
-bulge detection
-ethernet switch
-pdc interface
-preparation of sortmaster box
-preparation of sortmaster pallet

automation

sheetmaster 1606

standard equipment
-loading station with cow magnets
-unloading loading platform
-plate thickness gauge for double sheet control
-cleaner plate module
-control tasc 100
-manarmpaket

advanced facilities
-magnet system
-connection for additional cleaner (12 units)
-discharge load monitoring

gripmaster (3000 x 1500 mm) standard
-scissor lift table 300 mm
-residual grids pliers with sensors
-rest grille range tipping 3000 x 1500 mm

-storage interface
-safety device for storage connection incl. 2. photoelectric sensor family

MAKE: TRUMP CARD TYPE: TRUMATIC 6000 L - 1600 FMC YEAR OF BUILT: 07/2007 MAXIMUM WORKING RANGE X-Y: 3085 X 1740 MM LASER POWER: 3200 WATTS CONTROL: SIEMENS SINUMERIK 840 D HOURS OF OPERATION: 52328/52410/10903 (06/2017) PUNCHING POWER: 22 TO POSITIONING RANGE COMBINES: 2585 X 1650 MM POSITIONING RANGE LASER OPERATION: 3085 X 1650 MM POSITIONING RANGE PUNCH OPERATION: 3085 X 1740 MM MAXIMUM SHEET THICKNESS: 8 MM MAXIMUM PUNCHING DIAMETER: 76.2 MM MAXIMUM WORKPIECE WEIGHT: 230 KG MAX SPEED: 90/60/108 M / MIN NUMBER OF TOOL STATIONS: 17 NUMBER OF CLAMPS: 4 LENGTH: 7900 MM WIDTH: 9100 MM HEIGHT: 2400 MM WEIGHT: 23500 KG STANDARD EQUIPMENT - STURDY C FRAME -COORDINATE GUIDE WITH INTEGRATED LINEAR MAGAZINE -21 PLACES FOR TOOLS AND CLAMPS -3 CLAMPS -DRIVES: MAINTENANCE-FREE THREE-PHASE SERVOMOTORS -PROGRAMMABLE PRESSER TO THE REPOSITIONING WITH ADJUSTABLE DOWN HOLDER FORCE -SENSOR-CONTROLLED PART SLIDES 500 X 500 MM FOR PUNCHING AND LASER STATION, EXPRESSION CYLINDER ON LASER SLIDE -2 GOOD SLIDE -LASERAGGREAGAT: HOCHFREQUENZANGEREGTER CO2 LASER TRUFLOW 2000, VIBRATION-ISOLATED, INTEGRATED IN MACHINE FRAME, INCLUDING COOLING UNIT AND LASER CONTROL TASC 3 -NITROLINE HIGH PRESSURE CUTTING -FAST PROCESSING WITH SPRINTLINE -CONTOURLINE FOR MAKING SMALL HOLES -CUTTING GAS PRESSURE SETTING CAN BE PROGRAMMED -LASER CUTTING HEAD: 5 "-LENS, QUICK CHANGE FACILITY, DISTANCE CONTROL CONTROLLINE" -SOLAR -ADDITIONAL CUTTING HEAD WITH 7.5 "LENS -PUNCHING HEAD: HYDRAULIC MONO TOOL HOLDER, 360 &ACIRC;&DEG; ROTATION FOR ALL TOOLS, AUTOMATIC TOOL LENGTH COMPENSATION, TOOL SPRAY LUBRICATION, 2. LUBRICANT CONTAINERS, LIFTING AND THREAD COUNTER, PUNCHING SLUG EXTRACTION, CHIP BUCKETS -CONTROL: SINUMERIK 840 D, TFT COLOUR MONITOR 10,4 ", SIMPLE OPERATION, ONLINE HELP, DIAGNOSTICS, MAINTENANCE LOGBOOK, TECHNOLOGY DATA ORDER TABLES, TELESERVICE, 3.5 "-FLOPPY DRIVE" RJ45 NETWORK CONNECTOR -SECURITY: MEHRSTRAHLIGE PHOTOCELLS, EMERGENCY SHUT-DOWN LINKAGE, EXTRACTION AND COMPACT DUST EXTRACTOR, PROTECTION AGAINST SCATTERED RADIATION ON THE CUTTING HEAD ADVANCED FACILITIES -TRUFLOW 3200 INCLUDES CUTTING HEAD WITH 9 "LENS FOR STAINLESS STEEL -FOCUSLINE -FUNCTION MULTOTOOL -FUNCTION MULTIBEND -FUNCTION THREAD FORMING SIGNING / FAST BEADING -FUNCTION ROLE TECHNOLOGY -FUNCTION SOFT PUNCH -ADAPTIVE STROKE CALIBRATION -STRIPLINE -1 ADDITIONAL CLAMPING CLAW -DESIGNATION CYLINDER -VIBRATION-DAMPED INSTALLATION -AUTOMATIC SWITCH-OFF -CHIP CONVEYOR WITH TILT TRAY -BLOWING DEVICE HARDWARE -BULGE DETECTION -ETHERNET SWITCH -PDC INTERFACE -PREPARATION OF SORTMASTER BOX -PREPARATION OF SORTMASTER PALLET AUTOMATION SHEETMASTER 1606 STANDARD EQUIPMENT -LOADING STATION WITH COW MAGNETS -UNLOADING LOADING PLATFORM -PLATE THICKNESS GAUGE FOR DOUBLE SHEET CONTROL -CLEANER PLATE MODULE -CONTROL TASC 100 -MANARMPAKET ADVANCED FACILITIES -MAGNET SYSTEM -CONNECTION FOR ADDITIONAL CLEANER (12 UNITS) -DISCHARGE LOAD MONITORING GRIPMASTER (3000 X 1500 MM) STANDARD -SCISSOR LIFT TABLE 300 MM -RESIDUAL GRIDS PLIERS WITH SENSORS -REST GRILLE RANGE TIPPING 3000 X 1500 MM -STORAGE INTERFACE -SAFETY DEVICE FOR STORAGE CONNECTION INCL. 2. PHOTOELECTRIC SENSOR FAMILY
Vendedor: AGM- Rühle GmbH
Año de construcción: usado
Precio: 25 €
Ubicación: Land-
&bull; effective protection
&bull; now available

price: per piece

&bull; variant: u-shaped heavy duty version
&bull; color: black/yellow
&bull; size: h400xl120xwandstã¤rke 5mm
&bull; stock: 215 pieces

your advantages:

&bull; protection against damage due to storage/retrieval machines like forklifts
&bull; to effectively protect goods and pallet rack
&bull; base is wrapped in front and side
&bull; compliance with the security requirements of the professional association

all prices are net plus 19% vat and freight/shipping
a pick-up is possible by appointment only.
sale only to professionals. &BULL; EFFECTIVE PROTECTION &BULL; NOW AVAILABLE PRICE: PER PIECE &BULL; VARIANT: U-SHAPED HEAVY DUTY VERSION &BULL; COLOR: BLACK/YELLOW &BULL; SIZE: H400XL120XWANDST&ATILDE;&CURREN;RKE 5MM &BULL; STOCK: 215 PIECES YOUR ADVANTAGES: &BULL; PROTECTION AGAINST DAMAGE DUE TO STORAGE/RETRIEVAL MACHINES LIKE FORKLIFTS &BULL; TO EFFECTIVELY PROTECT GOODS AND PALLET RACK &BULL; BASE IS WRAPPED IN FRONT AND SIDE &BULL; COMPLIANCE WITH THE SECURITY REQUIREMENTS OF THE PROFESSIONAL ASSOCIATION ALL PRICES ARE NET PLUS 19% VAT AND FREIGHT/SHIPPING A PICK-UP IS POSSIBLE BY APPOINTMENT ONLY. SALE ONLY TO PROFESSIONALS.
Vendedor: HERATEC Handels GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-no. of printing heads                          6
in feeding unit
pre-treatment                            gas
drying                                       uv tunnel
average pieces output                    500 lids/min
restacking
counting unit
min. diam. round lid                     50 mm
max. diam. round lid                     285 mm
rectangular lid min. width               50 x 50 mm
rectangular lid max. width               300 x 285 mm
printing area round lid max.             250 mm
printing area rect. lid min.             50 x 50 mm
printing area rectanq. cup max.      250 x 250 mm
total connected load                     3x380 / 50 v/hz
total power connection                   26 kva
compressor min.                          5 bar
air consumption / cycle                  40-60 m?/hr.
weight                                       2000 kg. NO. OF PRINTING HEADS 6 IN FEEDING UNIT PRE-TREATMENT GAS DRYING UV TUNNEL AVERAGE PIECES OUTPUT 500 LIDS/MIN RESTACKING COUNTING UNIT MIN. DIAM. ROUND LID 50 MM MAX. DIAM. ROUND LID 285 MM RECTANGULAR LID MIN. WIDTH 50 X 50 MM RECTANGULAR LID MAX. WIDTH 300 X 285 MM PRINTING AREA ROUND LID MAX. 250 MM PRINTING AREA RECT. LID MIN. 50 X 50 MM PRINTING AREA RECTANQ. CUP MAX. 250 X 250 MM TOTAL CONNECTED LOAD 3X380 / 50 V/HZ TOTAL POWER CONNECTION 26 KVA COMPRESSOR MIN. 5 BAR AIR CONSUMPTION / CYCLE 40-60 M?/HR. WEIGHT 2000 KG.
Vendedor: Mega Plast GmbH
Año de construcción: usado
Ubicación: Land-inpress control
wallscreen
prinect press center with remote control of ink zones, ink fountain roller as well lateral, circumferential and diagonal register, with light pen, job memory card and touch screen
alcolor vario damping with circulation and refrigeration
combistar ink temperature control
autoplate xl fully automatic plate change
preset plus automatic size adjustment
automatic ink roller wash-up device
automatic blanket and impression cylinder wash-up device
ionsiator advanced in feeder and delivery
powder sprayer weko ap 500
airstar pro (water cooled)
high pile delivery with air transfer system
serial equipment INPRESS CONTROL WALLSCREEN PRINECT PRESS CENTER WITH REMOTE CONTROL OF INK ZONES, INK FOUNTAIN ROLLER AS WELL LATERAL, CIRCUMFERENTIAL AND DIAGONAL REGISTER, WITH LIGHT PEN, JOB MEMORY CARD AND TOUCH SCREEN ALCOLOR VARIO DAMPING WITH CIRCULATION AND REFRIGERATION COMBISTAR INK TEMPERATURE CONTROL AUTOPLATE XL FULLY AUTOMATIC PLATE CHANGE PRESET PLUS AUTOMATIC SIZE ADJUSTMENT AUTOMATIC INK ROLLER WASH-UP DEVICE AUTOMATIC BLANKET AND IMPRESSION CYLINDER WASH-UP DEVICE IONSIATOR ADVANCED IN FEEDER AND DELIVERY POWDER SPRAYER WEKO AP 500 AIRSTAR PRO (WATER COOLED) HIGH PILE DELIVERY WITH AIR TRANSFER SYSTEM SERIAL EQUIPMENT
Vendedor: Black Horse Machinery, S.L.
Año de construcción: usado
Precio: 25 €
Ubicación: Land-&amp;euro; 25-
each shopping cart
total loss only 23.--/ piece (not amended)
 
basket volume: 155 l
stock: 124 pieces

all prices are 19% vat and shipping in net zzgl

technical details:
 
manufacturer: seal
model: mercury weekend 160e/ka
condition: mortgage without function, handles used, partly damaged (but functional), all cars that is operational.
special feature: with child seat, box top and kleinteiltrenner.
 
the wanzl leader the company is connected to seal around the world famous german manufacturer of shopping cart. the mercury weekend 160e/ka provides you with nice shopping cart, however without deposit system - ideal for export. this practical shopping cart provides you with quality, which is successfully used in many well-known supermarket chains.

your advantages:

quality of the brand
available immediately, short delivery time, because creative commons &AMP;EURO; 25- EACH SHOPPING CART TOTAL LOSS ONLY 23.--/ PIECE (NOT AMENDED) BASKET VOLUME: 155 L STOCK: 124 PIECES ALL PRICES ARE 19% VAT AND SHIPPING IN NET ZZGL TECHNICAL DETAILS: MANUFACTURER: SEAL MODEL: MERCURY WEEKEND 160E/KA CONDITION: MORTGAGE WITHOUT FUNCTION, HANDLES USED, PARTLY DAMAGED (BUT FUNCTIONAL), ALL CARS THAT IS OPERATIONAL. SPECIAL FEATURE: WITH CHILD SEAT, BOX TOP AND KLEINTEILTRENNER. THE WANZL LEADER THE COMPANY IS CONNECTED TO SEAL AROUND THE WORLD FAMOUS GERMAN MANUFACTURER OF SHOPPING CART. THE MERCURY WEEKEND 160E/KA PROVIDES YOU WITH NICE SHOPPING CART, HOWEVER WITHOUT DEPOSIT SYSTEM - IDEAL FOR EXPORT. THIS PRACTICAL SHOPPING CART PROVIDES YOU WITH QUALITY, WHICH IS SUCCESSFULLY USED IN MANY WELL-KNOWN SUPERMARKET CHAINS. YOUR ADVANTAGES: QUALITY OF THE BRAND AVAILABLE IMMEDIATELY, SHORT DELIVERY TIME, BECAUSE CREATIVE COMMONS
Vendedor: HERATEC Handels GmbH & Co. KG
Año de construcción: usado
Precio: 3.267 €
Ubicación:
o oszillation motor-connection 24 volt by pwm controllable ( for example: tangential knife ) or
24 volt constant for motor break by st-plug

o 2 relais for maximum 1200 watt by software switchable (up from win pcnc light), 230 volt,
max. 6,0 a / plug (for example air compressor, cooling, exhaust, dust extraction).

o 0 - 10 volt for connecting a hf converter for an high frequency spindle
o 12 status-leds for monitoring all important function (power, toggle, move, x, y, z, c; overheat,

emergency stop, relais: spindle / cooling, short circuit)

o connection possibility of 4 end- or. reference switches and one emergency stop switch

o motor connection by d-sub 9-pin. (c-axis: 15-pin.)

o emergency-stop switch

o overheating protection

o short circuit protection



--------------------------------------------------------------------------------




more information, several videos about the applicability of the machine and customer implementations can be found here.



the name high-z derives from the fact, that the machines lower contruction allows to work on pieces with unlimited height.


because almost 90% of the demand for a 5-channel microstep control and subsequent expansion of an additional axis, the production of the 4-channel control won't be produced any more in the near future!



take advantage of the high-z 3d-cnc-router as a plasma cutting machine for plasma cutting of steel, etc. infos here !!!





software process for our cnc-routers:


you simply need to draw, control the tool path and finally move the machine with the generated g-codes.



usable software:



-construcam-3d - win pcnc- mach2/mach 3 - to 3d- cnc router / milling and engraving machine / engraver

-deskproto - win pcnc- mach2/mach 3 - to 3d- cnc router / milling and engraving machine
fresadora fresatrice fraiseuse jyrsintae ???????? ?????? fraisage machin freesmachine frezesanas masina frezavimo masinos ????????? ?????? frezarka freza fraesmaskin frézovací stroj frézka ?????; new ready for operation .gif" alt="Land-specifications / technical data s-400/t

cnc-portal-router / cnc-engraving machine



grabite marble soapstione slate engraving photo engraving, milling ..................





with the purchase of the t-variation of high-z cnc-router you get a proven technology with a certain icing of the cake. high-z/t cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed.




because of the used ball screws the high-z/t 3d-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. at the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible.





with this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min.




here's a video on a unloaded drive with the new high-z / t.




this 3d-milling-machine series is usable in the industrial field as well as for works like engraving, milling, drilling, measuring, cutting and measuring out systems as for example adhering of adhesive on 3d outlines.



all cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. also, all cnc-engraving-machines are equipped with an emergency stop button. an additional emergency stop you find in front of the controller.




basic equipment of all high-z cnc-milling machines:


software construcam-3d limited ( from s-720 and s-400/t ) included !!



contact free reference switch and emergency stop button as well as 22mm thick linear guide ways and individually adapted screw nuts !!



--------------------------------------------------------------------------------



equipment / productdetails:



odrive : 4 stepping motor by nanotec with 1600 steps/rev (1/8 step)
o2 motors for constant tension and compression during milling operation on x-axis
oguide ways x and y axle 22 mm / z axis 16mm, grinded and with 61hrc hardened surface
ofeed through of long workpieces possible, because there's no belt drive at the end of the x-axle

oball bearings at both sides of ball screws on x and y axis
otraverse speed of rapid feed: max. 7000 mm/min
otechnical resolution : 0,00625 mm ( 1/8 schritt )
oreversal error max.: +/- 10µm ( 0,01mm )

otable size / clamping area: 730 x 400 mm
otraverse paths: x=400 mm; y=280 mm; z= 110 mm
oreference- and limit switch on all axes
odouble safety emergency stop button
oenergy chain for clean cabling
ototal dinemsions incl motors: l x w x h = appr. 730 x 520 x 500mm
omilling motor anchorage: euroneck Ø43mm
oincl. software win pcnc light (optional win pcnc economy, usb or professional)

oincl. software construcam-3d limited ( recommended sell price full version 1902.81 eur)

omodular frame for universal application
oweight appr. 31 kg
ocomplete machine includet 4 driver microstep controller 4 x 3,5 ampere

oan approx. 30-minute long introduction during pick up and an unlimted telephone support are included.

oan approx. 2 hours long introduction and an installation of software on your brought note book/ pc as well as a explanation of fundamental terms of corel draw etc. possible, too.



--------------------------------------------------------------------------------



technical data contained in the price tÜv-certified control system, tailored to the cnc milling machine / cnc engraving machine:



o 4-channel stepper motor -cnc-controller with actual smd-technology

o main voltage 115 - 240 volt / 47 - 63 hz.

o motor current 4 x 3,5 ampere

o microstep controller resolution 1/10-step / 2000 steps/rev.

o 4 connections for 4 brushless motor / stepper motor

o connection with parallel port and software win pcnc light, economy or usb with win pcnc usb or

profi version. ( also possible:mach3, usbcnc, nc-easy linux emc and linux cnc and much other

stepper driver software.)

o "sleep-function" for controlling current down

o oszillation motor-connection 24 volt by pwm controllable ( for example: tangential knife ) or
24 volt constant for motor break by st-plug

o 2 relais for maximum 1200 watt by software switchable (up from win pcnc light), 230 volt,
max. 6,0 a / plug (for example air compressor, cooling, exhaust, dust extraction).

o 0 - 10 volt for connecting a hf converter for an high frequency spindle
o 12 status-leds for monitoring all important function (power, toggle, move, x, y, z, c; overheat,

emergency stop, relais: spindle / cooling, short circuit)

o connection possibility of 4 end- or. reference switches and one emergency stop switch

o motor connection by d-sub 9-pin. (c-axis: 15-pin.)

o emergency-stop switch

o overheating protection

o short circuit protection



--------------------------------------------------------------------------------




more information, several videos about the applicability of the machine and customer implementations can be found here.



the name high-z derives from the fact, that the machines lower contruction allows to work on pieces with unlimited height.


because almost 90% of the demand for a 5-channel microstep control and subsequent expansion of an additional axis, the production of the 4-channel control won't be produced any more in the near future!



take advantage of the high-z 3d-cnc-router as a plasma cutting machine for plasma cutting of steel, etc. infos here !!!





software process for our cnc-routers:


you simply need to draw, control the tool path and finally move the machine with the generated g-codes.



usable software:



-construcam-3d - win pcnc- mach2/mach 3 - to 3d- cnc router / milling and engraving machine / engraver

-deskproto - win pcnc- mach2/mach 3 - to 3d- cnc router / milling and engraving machine
fresadora fresatrice fraiseuse jyrsintae ???????? ?????? fraisage machin freesmachine frezesanas masina frezavimo masinos ????????? ?????? frezarka freza fraesmaskin frézovací stroj frézka ?????; new ready for operation " style="height: 18px;"> SPECIFICATIONS / TECHNICAL DATA S-400/T

CNC-PORTAL-ROUTER / CNC-ENGRAVING MACHINE



GRABITE MARBLE SOAPSTIONE SLATE ENGRAVING PHOTO ENGRAVING, MILLING ..................





WITH THE PURCHASE OF THE T-VARIATION OF HIGH-Z CNC-ROUTER YOU GET A PROVEN TECHNOLOGY WITH A CERTAIN ICING OF THE CAKE. HIGH-Z/T CNC-ROUTERS WAS CONCEIVED FOR ONCE MORE PRECISION (REPETITION PRECISION APPROX. 0,02MM) AND ESPECIALLY FOR HIGHER TRAVERSE SPEED.




BECAUSE OF THE USED BALL SCREWS THE HIGH-Z/T 3D-CNC-ENGRAVERS ACHIEVES A FANTASTIC PRECISION AND AN ALMOST UNMEASURABLE BACK LASH OF APPROX. 0,01MM. AT THE SAME TIME THERE ARE HIGH TRAVERSE SPEEDS UP TO APPROX. 108MM / SEC. ( 6.500 MM/MIN ) POSSIBLE.





WITH THIS CNC-MACHINES YOU'RE ABLE TO CARRY OUT AN ENGRAVE AND MILL SPEEDS OF APPROX. 4500 MM/MIN. AND EXPRESS TRAVELS UP TO 6500MM/MIN.




HERE'S A VIDEO ON A UNLOADED DRIVE WITH THE NEW HIGH-Z / T.




THIS 3D-MILLING-MACHINE SERIES IS USABLE IN THE INDUSTRIAL FIELD AS WELL AS FOR WORKS LIKE ENGRAVING, MILLING, DRILLING, MEASURING, CUTTING AND MEASURING OUT SYSTEMS AS FOR EXAMPLE ADHERING OF ADHESIVE ON 3D OUTLINES.



ALL CNC-MACHINES ARE BEING DELIVERED WITH BLACK ENERGY-CHAINS ON ALL AXIS, WHICH ALLOWS A BETTER CABLING MANAGEMENT. ALSO, ALL CNC-ENGRAVING-MACHINES ARE EQUIPPED WITH AN EMERGENCY STOP BUTTON. AN ADDITIONAL EMERGENCY STOP YOU FIND IN FRONT OF THE CONTROLLER.




BASIC EQUIPMENT OF ALL HIGH-Z CNC-MILLING MACHINES:


SOFTWARE CONSTRUCAM-3D LIMITED ( FROM S-720 AND S-400/T ) INCLUDED !!



CONTACT FREE REFERENCE SWITCH AND EMERGENCY STOP BUTTON AS WELL AS 22MM THICK LINEAR GUIDE WAYS AND INDIVIDUALLY ADAPTED SCREW NUTS !!



--------------------------------------------------------------------------------



EQUIPMENT / PRODUCTDETAILS:



ODRIVE : 4 STEPPING MOTOR BY NANOTEC WITH 1600 STEPS/REV (1/8 STEP)
O2 MOTORS FOR CONSTANT TENSION AND COMPRESSION DURING MILLING OPERATION ON X-AXIS
OGUIDE WAYS X AND Y AXLE 22 MM / Z AXIS 16MM, GRINDED AND WITH 61HRC HARDENED SURFACE
OFEED THROUGH OF LONG WORKPIECES POSSIBLE, BECAUSE THERE'S NO BELT DRIVE AT THE END OF THE X-AXLE

OBALL BEARINGS AT BOTH SIDES OF BALL SCREWS ON X AND Y AXIS
OTRAVERSE SPEED OF RAPID FEED: MAX. 7000 MM/MIN
OTECHNICAL RESOLUTION : 0,00625 MM ( 1/8 SCHRITT )
OREVERSAL ERROR MAX.: +/- 10µM ( 0,01MM )

OTABLE SIZE / CLAMPING AREA: 730 X 400 MM
OTRAVERSE PATHS: X=400 MM; Y=280 MM; Z= 110 MM
OREFERENCE- AND LIMIT SWITCH ON ALL AXES
ODOUBLE SAFETY EMERGENCY STOP BUTTON
OENERGY CHAIN FOR CLEAN CABLING
OTOTAL DINEMSIONS INCL MOTORS: L X W X H = APPR. 730 X 520 X 500MM
OMILLING MOTOR ANCHORAGE: EURONECK Ø43MM
OINCL. SOFTWARE WIN PCNC LIGHT (OPTIONAL WIN PCNC ECONOMY, USB OR PROFESSIONAL)

OINCL. SOFTWARE CONSTRUCAM-3D LIMITED ( RECOMMENDED SELL PRICE FULL VERSION 1902.81 EUR)

OMODULAR FRAME FOR UNIVERSAL APPLICATION
OWEIGHT APPR. 31 KG
OCOMPLETE MACHINE INCLUDET 4 DRIVER MICROSTEP CONTROLLER 4 X 3,5 AMPERE

OAN APPROX. 30-MINUTE LONG INTRODUCTION DURING PICK UP AND AN UNLIMTED TELEPHONE SUPPORT ARE INCLUDED.

OAN APPROX. 2 HOURS LONG INTRODUCTION AND AN INSTALLATION OF SOFTWARE ON YOUR BROUGHT NOTE BOOK/ PC AS WELL AS A EXPLANATION OF FUNDAMENTAL TERMS OF COREL DRAW ETC. POSSIBLE, TOO.



--------------------------------------------------------------------------------



TECHNICAL DATA CONTAINED IN THE PRICE TÜV-CERTIFIED CONTROL SYSTEM, TAILORED TO THE CNC MILLING MACHINE / CNC ENGRAVING MACHINE:



O 4-CHANNEL STEPPER MOTOR -CNC-CONTROLLER WITH ACTUAL SMD-TECHNOLOGY

O MAIN VOLTAGE 115 - 240 VOLT / 47 - 63 HZ.

O MOTOR CURRENT 4 X 3,5 AMPERE

O MICROSTEP CONTROLLER RESOLUTION 1/10-STEP / 2000 STEPS/REV.

O 4 CONNECTIONS FOR 4 BRUSHLESS MOTOR / STEPPER MOTOR

O CONNECTION WITH PARALLEL PORT AND SOFTWARE WIN PCNC LIGHT, ECONOMY OR USB WITH WIN PCNC USB OR

PROFI VERSION. ( ALSO POSSIBLE:MACH3, USBCNC, NC-EASY LINUX EMC AND LINUX CNC AND MUCH OTHER

STEPPER DRIVER SOFTWARE.)

O "SLEEP-FUNCTION" FOR CONTROLLING CURRENT DOWN

O OSZILLATION MOTOR-CONNECTION 24 VOLT BY PWM CONTROLLABLE ( FOR EXAMPLE: TANGENTIAL KNIFE ) OR
24 VOLT CONSTANT FOR MOTOR BREAK BY ST-PLUG

O 2 RELAIS FOR MAXIMUM 1200 WATT BY SOFTWARE SWITCHABLE (UP FROM WIN PCNC LIGHT), 230 VOLT,
MAX. 6,0 A / PLUG (FOR EXAMPLE AIR COMPRESSOR, COOLING, EXHAUST, DUST EXTRACTION).

O 0 - 10 VOLT FOR CONNECTING A HF CONVERTER FOR AN HIGH FREQUENCY SPINDLE
O 12 STATUS-LEDS FOR MONITORING ALL IMPORTANT FUNCTION (POWER, TOGGLE, MOVE, X, Y, Z, C; OVERHEAT,

EMERGENCY STOP, RELAIS: SPINDLE / COOLING, SHORT CIRCUIT)

O CONNECTION POSSIBILITY OF 4 END- OR. REFERENCE SWITCHES AND ONE EMERGENCY STOP SWITCH

O MOTOR CONNECTION BY D-SUB 9-PIN. (C-AXIS: 15-PIN.)

O EMERGENCY-STOP SWITCH

O OVERHEATING PROTECTION

O SHORT CIRCUIT PROTECTION



--------------------------------------------------------------------------------




MORE INFORMATION, SEVERAL VIDEOS ABOUT THE APPLICABILITY OF THE MACHINE AND CUSTOMER IMPLEMENTATIONS CAN BE FOUND HERE.



THE NAME HIGH-Z DERIVES FROM THE FACT, THAT THE MACHINES LOWER CONTRUCTION ALLOWS TO WORK ON PIECES WITH UNLIMITED HEIGHT.


BECAUSE ALMOST 90% OF THE DEMAND FOR A 5-CHANNEL MICROSTEP CONTROL AND SUBSEQUENT EXPANSION OF AN ADDITIONAL AXIS, THE PRODUCTION OF THE 4-CHANNEL CONTROL WON'T BE PRODUCED ANY MORE IN THE NEAR FUTURE!



TAKE ADVANTAGE OF THE HIGH-Z 3D-CNC-ROUTER AS A PLASMA CUTTING MACHINE FOR PLASMA CUTTING OF STEEL, ETC. INFOS HERE !!!





SOFTWARE PROCESS FOR OUR CNC-ROUTERS:


YOU SIMPLY NEED TO DRAW, CONTROL THE TOOL PATH AND FINALLY MOVE THE MACHINE WITH THE GENERATED G-CODES.



USABLE SOFTWARE:



-CONSTRUCAM-3D - WIN PCNC- MACH2/MACH 3 - TO 3D- CNC ROUTER / MILLING AND ENGRAVING MACHINE / ENGRAVER

-DESKPROTO - WIN PCNC- MACH2/MACH 3 - TO 3D- CNC ROUTER / MILLING AND ENGRAVING MACHINE
FRESADORA FRESATRICE FRAISEUSE JYRSINTAE ???????? ?????? FRAISAGE MACHIN FREESMACHINE FREZESANAS MASINA FREZAVIMO MASINOS ????????? ?????? FREZARKA FREZA FRAESMASKIN FRéZOVACí STROJ FRéZKA ?????; NEW READY FOR OPERATION
Vendedor: CNC-STEP GmbH & Co. KG
Año de construcción: usado
Precio: 3.823 €
Ubicación:
-oszillation motor-connection 24 volt by pwm controllable ( for example: tangential knife ) or 24 volt constant for motor break by st-plug

- 2 relais for maximum 1200 watt by software switchable (up from win pcnc light), 230 volt, max. 6,0 a / plug (for example air compressor, cooling, exhaust, dust extraction).

- 0 - 10 volt for connecting a hf converter for an high frequency spindle

- 12 status-leds for monitoring all important function (power, toggle, move, x, y, z, c; overheat, emergency stop, relais: spindle / cooling, short circuit)

- connection possibility of 4 end- or. reference switches and one emergency stop switch

- motor connection by d-sub 9-pin. (c-axis: 15-pin.)

- emergency-stop switch

- overheating protection

- short circuit protection



--------------------------------------------------------------------------------



more information, several videos about the applicability of the machine and customer implementations can be found here.



the name high-z derives from the fact, that the machines lower contruction allows to work on pieces with unlimited height.



because almost 90% of the demand for a 5-channel microstep control and subsequent expansion of an additional axis, the production of the 4-channel control won't be produced any more in the near future!



take advantage of the high-z 3d-cnc-router as a plasma cutting machine for plasma cutting of steel, etc. infos here !!!








software process for our cnc-routers:


you simply need to draw, control the tool path and finally move the machine with the generated g-codes.



usable software:





-construcam-3d - win pcnc- mach2/mach 3 - to 3d- cnc router / milling and engraving machine / engraver

-deskproto - win pcnc- mach2/mach 3 - to 3d- cnc router / milling and engraving machine / engraver

-filounc - win pcnc- mach2/mach 3 - to 3d- cnc router / milling and engraving machine / engraver

-3d-photoformer - win pcnc- mach2/mach 3 - to 3d- cnc router / milling and engraving machine
fresadora fresatrice fraiseuse jyrsintae ???????? ?????? fraisage machin freesmachine frezesanas masina frezavimo masinos ????????? ?????? frezarka freza fraesmaskin frézovací stroj frézka ?????; new ready for operation .gif" alt="Land-specifications / technical data s-720/t

cnc-engraving-machine / milling machine / cnc-router





with the purchase of the t-variation of high-z cnc-router you get a proven technology with a certain icing of the cake in german tÜv-certified quality. high-z/t 3d-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed.



because of the used ball screws the high-z/t cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. at the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible.



with this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min.



here's a video on a unloaded drive with the new high-z / t.


this cnc-machine series is usable in the industrial field as well as for works like engraving, milling, drilling, measuring, cutting and measuring out systems as for example adhering of adhesive on 3d outlines.



all cnc-milling-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. also, all cnc-engraving-machines are equipped with an emergency stop button. an additional emergency stop you find in front of the controller.



basic equipment of all high-z cnc-milling machines:


limited software construcam-3d ( from s-720 and s-400/t ) included !!



contact free reference switch and emergency stop button as well as 22mm thick linear guide ways and individually adapted screw nuts !!





--------------------------------------------------------------------------------



equipment / productdetails:






odrive : 4 stepping motor by nanotec with 1600 steps/rev (1/8 step)
o2 motors for constant tension and compression during milling operation on x-axis
oguide ways x and y axle 22 mm / z axis 16mm, grinded and with 61hrc hardened surface
ofeed through of long workpieces possible, because there's no belt drive at the end of the x-axle

oball bearings at both sides of ball screws on x and y axis
otraverse speed of rapid feed: max. 7000 mm/min
otechnical resolution : 0,00625 mm ( 1/8 schritt )
oreversal error max.: +/- 10µm ( 0,01mm )

otable size / clamping area: 1050 x 520 mm
otraverse paths: x=720 mm; y=400 mm; z= 110 mm
oreference- and limit switch on all axes
odouble safety emergency stop button
oenergy chain for clean cabling
ototal dinemsions incl motors: l x w x h = appr. 1070 x 690 x 500mm
omilling motor anchorage: euroneck Ø43mm
oincl. software win pcnc light (optional win pcnc economy, usb or professional)

oincl. software construcam-3d limited ( recommended sell price full version 1902.81 eur)

omodular frame for universal application
oweight appr. 41 kg
ocomplete machine includet 4 driver microstep controller 4x 2,1 ampere

oan approx. 30-minute long introduction during pick up and an unlimted telephone support are included.

oan approx. 2 hours long introduction and an installation of software on your brought note book/ pc as well as a explanation of fundamental terms of corel draw etc. possible, too.



--------------------------------------------------------------------------------





technical data contained in the price tÜv-certified control system, tailored to the cnc milling machine / cnc milling machine:



- 4-channel stepper motor -cnc-controller with actual smd-technology

- main voltage 115 - 240 volt / 47 - 63 hz.

- motor current 4 x 3,5 ampere

- microstep controller resolution 1/10-step / 2000 steps/rev.

- 4 connections for 4 brushless motor / stepper motor

- connection with parallel port and software win pcnc light, economy or usb with win pcnc usb or profi version. ( also possible:mach3, usbcnc, nc-easy linux emc and linux cnc and much other stepper driver software.)

- "sleep-function" for controlling current down

-oszillation motor-connection 24 volt by pwm controllable ( for example: tangential knife ) or 24 volt constant for motor break by st-plug

- 2 relais for maximum 1200 watt by software switchable (up from win pcnc light), 230 volt, max. 6,0 a / plug (for example air compressor, cooling, exhaust, dust extraction).

- 0 - 10 volt for connecting a hf converter for an high frequency spindle

- 12 status-leds for monitoring all important function (power, toggle, move, x, y, z, c; overheat, emergency stop, relais: spindle / cooling, short circuit)

- connection possibility of 4 end- or. reference switches and one emergency stop switch

- motor connection by d-sub 9-pin. (c-axis: 15-pin.)

- emergency-stop switch

- overheating protection

- short circuit protection



--------------------------------------------------------------------------------



more information, several videos about the applicability of the machine and customer implementations can be found here.



the name high-z derives from the fact, that the machines lower contruction allows to work on pieces with unlimited height.



because almost 90% of the demand for a 5-channel microstep control and subsequent expansion of an additional axis, the production of the 4-channel control won't be produced any more in the near future!



take advantage of the high-z 3d-cnc-router as a plasma cutting machine for plasma cutting of steel, etc. infos here !!!








software process for our cnc-routers:


you simply need to draw, control the tool path and finally move the machine with the generated g-codes.



usable software:





-construcam-3d - win pcnc- mach2/mach 3 - to 3d- cnc router / milling and engraving machine / engraver

-deskproto - win pcnc- mach2/mach 3 - to 3d- cnc router / milling and engraving machine / engraver

-filounc - win pcnc- mach2/mach 3 - to 3d- cnc router / milling and engraving machine / engraver

-3d-photoformer - win pcnc- mach2/mach 3 - to 3d- cnc router / milling and engraving machine
fresadora fresatrice fraiseuse jyrsintae ???????? ?????? fraisage machin freesmachine frezesanas masina frezavimo masinos ????????? ?????? frezarka freza fraesmaskin frézovací stroj frézka ?????; new ready for operation " style="height: 18px;"> SPECIFICATIONS / TECHNICAL DATA S-720/T

CNC-ENGRAVING-MACHINE / MILLING MACHINE / CNC-ROUTER





WITH THE PURCHASE OF THE T-VARIATION OF HIGH-Z CNC-ROUTER YOU GET A PROVEN TECHNOLOGY WITH A CERTAIN ICING OF THE CAKE IN GERMAN TÜV-CERTIFIED QUALITY. HIGH-Z/T 3D-CNC-ENGRAVER WAS CONCEIVED FOR ONCE MORE PRECISION (REPETITION PRECISION APPROX. 0,02MM) AND ESPECIALLY FOR HIGHER TRAVERSE SPEED.



BECAUSE OF THE USED BALL SCREWS THE HIGH-Z/T CNC MILLING MACHINES ACHIEVES A FANTASTIC PRECISION AND AN ALMOST UNMEASURABLE BACK LASH OF APPROX. 0,01MM. AT THE SAME TIME THERE ARE HIGH TRAVERSE SPEEDS UP TO APPROX. 108MM / SEC. ( 6.500 MM/MIN ) POSSIBLE.



WITH THIS CNC-MACHINES YOU'RE ABLE TO CARRY OUT AN ENGRAVE AND MILL SPEEDS OF APPROX. 4500 MM/MIN. AND EXPRESS TRAVELS UP TO 6500MM/MIN.



HERE'S A VIDEO ON A UNLOADED DRIVE WITH THE NEW HIGH-Z / T.


THIS CNC-MACHINE SERIES IS USABLE IN THE INDUSTRIAL FIELD AS WELL AS FOR WORKS LIKE ENGRAVING, MILLING, DRILLING, MEASURING, CUTTING AND MEASURING OUT SYSTEMS AS FOR EXAMPLE ADHERING OF ADHESIVE ON 3D OUTLINES.



ALL CNC-MILLING-MACHINES ARE BEING DELIVERED WITH BLACK ENERGY-CHAINS ON ALL AXIS, WHICH ALLOWS A BETTER CABLING MANAGEMENT. ALSO, ALL CNC-ENGRAVING-MACHINES ARE EQUIPPED WITH AN EMERGENCY STOP BUTTON. AN ADDITIONAL EMERGENCY STOP YOU FIND IN FRONT OF THE CONTROLLER.



BASIC EQUIPMENT OF ALL HIGH-Z CNC-MILLING MACHINES:


LIMITED SOFTWARE CONSTRUCAM-3D ( FROM S-720 AND S-400/T ) INCLUDED !!



CONTACT FREE REFERENCE SWITCH AND EMERGENCY STOP BUTTON AS WELL AS 22MM THICK LINEAR GUIDE WAYS AND INDIVIDUALLY ADAPTED SCREW NUTS !!





--------------------------------------------------------------------------------



EQUIPMENT / PRODUCTDETAILS:






ODRIVE : 4 STEPPING MOTOR BY NANOTEC WITH 1600 STEPS/REV (1/8 STEP)
O2 MOTORS FOR CONSTANT TENSION AND COMPRESSION DURING MILLING OPERATION ON X-AXIS
OGUIDE WAYS X AND Y AXLE 22 MM / Z AXIS 16MM, GRINDED AND WITH 61HRC HARDENED SURFACE
OFEED THROUGH OF LONG WORKPIECES POSSIBLE, BECAUSE THERE'S NO BELT DRIVE AT THE END OF THE X-AXLE

OBALL BEARINGS AT BOTH SIDES OF BALL SCREWS ON X AND Y AXIS
OTRAVERSE SPEED OF RAPID FEED: MAX. 7000 MM/MIN
OTECHNICAL RESOLUTION : 0,00625 MM ( 1/8 SCHRITT )
OREVERSAL ERROR MAX.: +/- 10µM ( 0,01MM )

OTABLE SIZE / CLAMPING AREA: 1050 X 520 MM
OTRAVERSE PATHS: X=720 MM; Y=400 MM; Z= 110 MM
OREFERENCE- AND LIMIT SWITCH ON ALL AXES
ODOUBLE SAFETY EMERGENCY STOP BUTTON
OENERGY CHAIN FOR CLEAN CABLING
OTOTAL DINEMSIONS INCL MOTORS: L X W X H = APPR. 1070 X 690 X 500MM
OMILLING MOTOR ANCHORAGE: EURONECK Ø43MM
OINCL. SOFTWARE WIN PCNC LIGHT (OPTIONAL WIN PCNC ECONOMY, USB OR PROFESSIONAL)

OINCL. SOFTWARE CONSTRUCAM-3D LIMITED ( RECOMMENDED SELL PRICE FULL VERSION 1902.81 EUR)

OMODULAR FRAME FOR UNIVERSAL APPLICATION
OWEIGHT APPR. 41 KG
OCOMPLETE MACHINE INCLUDET 4 DRIVER MICROSTEP CONTROLLER 4X 2,1 AMPERE

OAN APPROX. 30-MINUTE LONG INTRODUCTION DURING PICK UP AND AN UNLIMTED TELEPHONE SUPPORT ARE INCLUDED.

OAN APPROX. 2 HOURS LONG INTRODUCTION AND AN INSTALLATION OF SOFTWARE ON YOUR BROUGHT NOTE BOOK/ PC AS WELL AS A EXPLANATION OF FUNDAMENTAL TERMS OF COREL DRAW ETC. POSSIBLE, TOO.



--------------------------------------------------------------------------------





TECHNICAL DATA CONTAINED IN THE PRICE TÜV-CERTIFIED CONTROL SYSTEM, TAILORED TO THE CNC MILLING MACHINE / CNC MILLING MACHINE:



- 4-CHANNEL STEPPER MOTOR -CNC-CONTROLLER WITH ACTUAL SMD-TECHNOLOGY

- MAIN VOLTAGE 115 - 240 VOLT / 47 - 63 HZ.

- MOTOR CURRENT 4 X 3,5 AMPERE

- MICROSTEP CONTROLLER RESOLUTION 1/10-STEP / 2000 STEPS/REV.

- 4 CONNECTIONS FOR 4 BRUSHLESS MOTOR / STEPPER MOTOR

- CONNECTION WITH PARALLEL PORT AND SOFTWARE WIN PCNC LIGHT, ECONOMY OR USB WITH WIN PCNC USB OR PROFI VERSION. ( ALSO POSSIBLE:MACH3, USBCNC, NC-EASY LINUX EMC AND LINUX CNC AND MUCH OTHER STEPPER DRIVER SOFTWARE.)

- "SLEEP-FUNCTION" FOR CONTROLLING CURRENT DOWN

-OSZILLATION MOTOR-CONNECTION 24 VOLT BY PWM CONTROLLABLE ( FOR EXAMPLE: TANGENTIAL KNIFE ) OR 24 VOLT CONSTANT FOR MOTOR BREAK BY ST-PLUG

- 2 RELAIS FOR MAXIMUM 1200 WATT BY SOFTWARE SWITCHABLE (UP FROM WIN PCNC LIGHT), 230 VOLT, MAX. 6,0 A / PLUG (FOR EXAMPLE AIR COMPRESSOR, COOLING, EXHAUST, DUST EXTRACTION).

- 0 - 10 VOLT FOR CONNECTING A HF CONVERTER FOR AN HIGH FREQUENCY SPINDLE

- 12 STATUS-LEDS FOR MONITORING ALL IMPORTANT FUNCTION (POWER, TOGGLE, MOVE, X, Y, Z, C; OVERHEAT, EMERGENCY STOP, RELAIS: SPINDLE / COOLING, SHORT CIRCUIT)

- CONNECTION POSSIBILITY OF 4 END- OR. REFERENCE SWITCHES AND ONE EMERGENCY STOP SWITCH

- MOTOR CONNECTION BY D-SUB 9-PIN. (C-AXIS: 15-PIN.)

- EMERGENCY-STOP SWITCH

- OVERHEATING PROTECTION

- SHORT CIRCUIT PROTECTION



--------------------------------------------------------------------------------



MORE INFORMATION, SEVERAL VIDEOS ABOUT THE APPLICABILITY OF THE MACHINE AND CUSTOMER IMPLEMENTATIONS CAN BE FOUND HERE.



THE NAME HIGH-Z DERIVES FROM THE FACT, THAT THE MACHINES LOWER CONTRUCTION ALLOWS TO WORK ON PIECES WITH UNLIMITED HEIGHT.



BECAUSE ALMOST 90% OF THE DEMAND FOR A 5-CHANNEL MICROSTEP CONTROL AND SUBSEQUENT EXPANSION OF AN ADDITIONAL AXIS, THE PRODUCTION OF THE 4-CHANNEL CONTROL WON'T BE PRODUCED ANY MORE IN THE NEAR FUTURE!



TAKE ADVANTAGE OF THE HIGH-Z 3D-CNC-ROUTER AS A PLASMA CUTTING MACHINE FOR PLASMA CUTTING OF STEEL, ETC. INFOS HERE !!!








SOFTWARE PROCESS FOR OUR CNC-ROUTERS:


YOU SIMPLY NEED TO DRAW, CONTROL THE TOOL PATH AND FINALLY MOVE THE MACHINE WITH THE GENERATED G-CODES.



USABLE SOFTWARE:





-CONSTRUCAM-3D - WIN PCNC- MACH2/MACH 3 - TO 3D- CNC ROUTER / MILLING AND ENGRAVING MACHINE / ENGRAVER

-DESKPROTO - WIN PCNC- MACH2/MACH 3 - TO 3D- CNC ROUTER / MILLING AND ENGRAVING MACHINE / ENGRAVER

-FILOUNC - WIN PCNC- MACH2/MACH 3 - TO 3D- CNC ROUTER / MILLING AND ENGRAVING MACHINE / ENGRAVER

-3D-PHOTOFORMER - WIN PCNC- MACH2/MACH 3 - TO 3D- CNC ROUTER / MILLING AND ENGRAVING MACHINE
FRESADORA FRESATRICE FRAISEUSE JYRSINTAE ???????? ?????? FRAISAGE MACHIN FREESMACHINE FREZESANAS MASINA FREZAVIMO MASINOS ????????? ?????? FREZARKA FREZA FRAESMASKIN FRéZOVACí STROJ FRéZKA ?????; NEW READY FOR OPERATION
Vendedor: CNC-STEP GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-1 100,000 litre underground tank water tank steel tank water tank tank tank tank offer second-hand

for the storage of hot water / firefighting water.
according to din 6608 - with bituminous insulation on the outside.

l = approx. 16.00 m / d = 2.90 m the tank is used, in drained and cleaned. the tank was repaired in our factory from outside and to isolated with bitumen. however, insulation damage may be available at the container through transport.

for use as a fire-fighting water tank we can equip completely the tank with a fire department inlet, consisting of:

-1 pcs. grp dome shaft, diameter approx. 0.80 m =, = height 0.85 m.
          complete with walk-in cover made of galvanized steel. 
-1 suction pipe with a fixed coupling acc. to din 14319
          with special lock for fire - triangular key,.
-1 pcs vent pipe with hood.
-1 pcs. sounding pipe provided with dip stick for measurement of level,
-1 pcs. dome cover with screws and seal.

the suction pipe can be used both as a filling and transfer tube. 
 
the components are prepared ready for installation - factory-  1 100,000 LITRE UNDERGROUND TANK WATER TANK STEEL TANK WATER TANK TANK TANK TANK OFFER SECOND-HAND FOR THE STORAGE OF HOT WATER / FIREFIGHTING WATER. ACCORDING TO DIN 6608 - WITH BITUMINOUS INSULATION ON THE OUTSIDE. L = APPROX. 16.00 M / D = 2.90 M THE TANK IS USED, IN DRAINED AND CLEANED. THE TANK WAS REPAIRED IN OUR FACTORY FROM OUTSIDE AND TO ISOLATED WITH BITUMEN. HOWEVER, INSULATION DAMAGE MAY BE AVAILABLE AT THE CONTAINER THROUGH TRANSPORT. FOR USE AS A FIRE-FIGHTING WATER TANK WE CAN EQUIP COMPLETELY THE TANK WITH A FIRE DEPARTMENT INLET, CONSISTING OF: -1 PCS. GRP DOME SHAFT, DIAMETER APPROX. 0.80 M =, = HEIGHT 0.85 M. COMPLETE WITH WALK-IN COVER MADE OF GALVANIZED STEEL. -1 SUCTION PIPE WITH A FIXED COUPLING ACC. TO DIN 14319 WITH SPECIAL LOCK FOR FIRE - TRIANGULAR KEY,. -1 PCS VENT PIPE WITH HOOD. -1 PCS. SOUNDING PIPE PROVIDED WITH DIP STICK FOR MEASUREMENT OF LEVEL, -1 PCS. DOME COVER WITH SCREWS AND SEAL. THE SUCTION PIPE CAN BE USED BOTH AS A FILLING AND TRANSFER TUBE. THE COMPONENTS ARE PREPARED READY FOR INSTALLATION - FACTORY-
Vendedor: Alfred Schneider Gmbh & Co. Tankbau KG
Año de construcción: usado
Precio: 43.000 €
Ubicación: Land-digital offset press ( 2 pcs available)

screen true press 344rl and true press 344r

light source  mald (multi array laser diode)
plate  processless thermal plates
printing area  max. 330 x 460 mm (13 DIGITAL OFFSET PRESS ( 2 PCS AVAILABLE) SCREEN TRUE PRESS 344RL AND TRUE PRESS 344R LIGHT SOURCE MALD (MULTI ARRAY LASER DIODE) PLATE PROCESSLESS THERMAL PLATES PRINTING AREA MAX. 330 X 460 MM (13" X 18.1") PAPER STOCK SIZE 90 X 148 MM (3.5" X 5.8") TO 340 X 470 MM (13.4" X 18.5") PAPER STOCK THICKNESS*1 0.05 TO 0.4 MM (2 TO 15.7 MIL){CAN PRINT ENVELOPES} MAX. PRINTING SPEED UP TO 7,000 SHEETS/HOUR AUTOMATIC FUNCTIONS INK KEY CONTROL, INLINE DENSITY DETECTION AND OUTPUT FUNCTION (TRUEFIT ADVANCE), DAMPENING SOLUTION LEVEL CONTROLS, PLATE LOADING/UNLOADING, BLANKET CLEANING, INK ROLLER CLEANING, DAMPENING SOLUTION ROLLER CLEANING, PAPER PRESETS, PAPER REGISTRATION OIL SUPPLY CONCENTRATED OIL (MANUAL PUMP UP) DIMENSIONS (W X D X H)*2 2.045 X 3,850 X 1,920 MM (80.6" X 151.6" X 75.6") WEIGHT 4,960 KG (10,912 LB.) POWER REQUIREMENTS THREE PHASE 380 V/400 V/415 V, 15 A, 8KW HEAT PRODUCTION 30,000 KJ (7,200 KCAL) OPTIONS DAMPENING SOLUTION CIRCULATION SYSTEM (REQUIRED OPTION), RIP, COMPRESSOR, IR DRYING UNIT, PUSH SIDE GUIDE REGISTRATION UNIT *1 THE PAPER THICKNESS THAT CAN BE HANDLED MAY VARY WITH PRINTING CONDITIONS, ENVIRONMENT, INK, AND PAPER TYPE. *2 1,000 MM (39.4") CLEARANCE AROUND THE UNIT, AND 400 MM (15.8") CLEARANCE ABOVE IT, IS REQUIRED FOR THE PLACEMENT OF OPTIONAL SYSTEMS AND FOR MAINTENANCE PURPOSES. SCREEN TRUE PRESS 344RL: 43.000 EUR (ID. 1026) SCREEN TRUE PRESS 344R: 68.000 EUR (ID. 273) EX WORKS BUCHAREST WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. (+40 740-221.698 ) HABLAMOS ESPANOL. BESZELUNK MAGYARUL. (+40 743-177.040 ) IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Precio: 17.000 €
Ubicación: Land-printing press: web offset press + sheeter (optional)  
power supply: 380 v - 3.5 a - 50 hz

variable printing format
paper width 520 mm
printing width 508 mm
diameter of feed roll 1270 mm
diameter of feed axle 70 mm
paper lenght control device
band alligner
2 inverters between 1 + 2 and 2 + 3
wet offset printing units 5
box printing group 24 PRINTING PRESS: WEB OFFSET PRESS + SHEETER (OPTIONAL) POWER SUPPLY: 380 V - 3.5 A - 50 HZ VARIABLE PRINTING FORMAT PAPER WIDTH 520 MM PRINTING WIDTH 508 MM DIAMETER OF FEED ROLL 1270 MM DIAMETER OF FEED AXLE 70 MM PAPER LENGHT CONTROL DEVICE BAND ALLIGNER 2 INVERTERS BETWEEN 1 + 2 AND 2 + 3 WET OFFSET PRINTING UNITS 5 BOX PRINTING GROUP 24" DAHLGREN ALCOHOL DAMPENING SYSTEM COOLING INSTALLATION FOR DAMPENING SYSTEM CROSS PERFORATION 24" LONGITUDINAL PERFORATION WITH 4 KNIFE SUPPORTS VARIABLE FOLDING, 12" COGWHEEL DIAMETER OF REWIND ROLL 1270 MM PLATE BENDER DEVICE ELIMINATION TABLE ADDITIONAL EQUIPMENT - INSETTER WEB SCAN VIDEO CAMERA MANUAL STROBE LAMP EX WORKS BUCHAREST WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. (+40 740-221.698) HABLAMOS ESPANOL. BESZELUNK MAGYARUL. (+40 743-177.040) IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Ubicación: Land-we have for sale  a vacuun evaporation plant:

the plant consists of:

-3-stage vacuum evaporation system vv 75 kdb,

-down-flow evaporator  condest 	13 k-niro

technical details available upon request.


vacuum evaporation is a process which has been used by the large-scale chemical industry for decades. using vacuum evaporation systems allowed ? for the first time ? utilizing the advantages of this process also in small and medium-scale applications. vacuum evaporation systems have been developed specifically for the metal machining industry as well as for applications in the field of environmental protection
they are used to treat under vacuum aqueous solutions which contain pollutants. the typical operating parameters are an absolute pressure of approx. 50...100 mbar and a boiling temperature of approx. 60...85 °c related to water. in practice one should expect a boiling temperature of approx. 60 °c to 85 °c depending on the composition and concentration of the product. it is not possible to evaporate products which contain large quantities of solvents with a boiling temperature lower than that of water. for products inclined to foaming, normally the relevant precautions must be initiated in terms of the systems and equipment. the same is applicable to highly aggressive media. in such cases, the vacuum evaporation system can be provided with a halar coat in the boiling chamber and a hastelloy and/or graphite heat exchanger.


typical fields of application include: 

?	recover of electrolytes from electroplating
 
?	keeping a uniform rinsing water quality in static rinsing tanks
 
?	volume reduction of sewage waters which are damaging to environment prior to (external) waste disposal
 
?	separation of oil/water emulsions in the metal processing industry (drilling and sliding grinding emulsions, and the like)
 
?	volume reduction of photographic sewage water prior to incineration and/or waste disposal

?	concentration of peg containing water

the advantages of the vacuum evaporation process include:

?	gentle product handling

?	low operating and maintenance expenditure

?	low power consumption due to operation with integrated heat pump (approx. 5 kw heating output per kw of electric drive capacity of refrigerating compressor) 

?	fully automatic operation

?	also suitable for highly aggressive and chloride containing media due to the use of high acid-resistant materials

?	heat recovery possible for larger systems. using heat recovery it is possible to generate industrial or heating water with a temperature of up to approx. 50 °c. 
   WE HAVE FOR SALE A VACUUN EVAPORATION PLANT: THE PLANT CONSISTS OF: -3-STAGE VACUUM EVAPORATION SYSTEM VV 75 KDB, -DOWN-FLOW EVAPORATOR CONDEST 13 K-NIRO TECHNICAL DETAILS AVAILABLE UPON REQUEST. VACUUM EVAPORATION IS A PROCESS WHICH HAS BEEN USED BY THE LARGE-SCALE CHEMICAL INDUSTRY FOR DECADES. USING VACUUM EVAPORATION SYSTEMS ALLOWED ? FOR THE FIRST TIME ? UTILIZING THE ADVANTAGES OF THIS PROCESS ALSO IN SMALL AND MEDIUM-SCALE APPLICATIONS. VACUUM EVAPORATION SYSTEMS HAVE BEEN DEVELOPED SPECIFICALLY FOR THE METAL MACHINING INDUSTRY AS WELL AS FOR APPLICATIONS IN THE FIELD OF ENVIRONMENTAL PROTECTION THEY ARE USED TO TREAT UNDER VACUUM AQUEOUS SOLUTIONS WHICH CONTAIN POLLUTANTS. THE TYPICAL OPERATING PARAMETERS ARE AN ABSOLUTE PRESSURE OF APPROX. 50...100 MBAR AND A BOILING TEMPERATURE OF APPROX. 60...85 °C RELATED TO WATER. IN PRACTICE ONE SHOULD EXPECT A BOILING TEMPERATURE OF APPROX. 60 °C TO 85 °C DEPENDING ON THE COMPOSITION AND CONCENTRATION OF THE PRODUCT. IT IS NOT POSSIBLE TO EVAPORATE PRODUCTS WHICH CONTAIN LARGE QUANTITIES OF SOLVENTS WITH A BOILING TEMPERATURE LOWER THAN THAT OF WATER. FOR PRODUCTS INCLINED TO FOAMING, NORMALLY THE RELEVANT PRECAUTIONS MUST BE INITIATED IN TERMS OF THE SYSTEMS AND EQUIPMENT. THE SAME IS APPLICABLE TO HIGHLY AGGRESSIVE MEDIA. IN SUCH CASES, THE VACUUM EVAPORATION SYSTEM CAN BE PROVIDED WITH A HALAR COAT IN THE BOILING CHAMBER AND A HASTELLOY AND/OR GRAPHITE HEAT EXCHANGER. TYPICAL FIELDS OF APPLICATION INCLUDE: ? RECOVER OF ELECTROLYTES FROM ELECTROPLATING ? KEEPING A UNIFORM RINSING WATER QUALITY IN STATIC RINSING TANKS ? VOLUME REDUCTION OF SEWAGE WATERS WHICH ARE DAMAGING TO ENVIRONMENT PRIOR TO (EXTERNAL) WASTE DISPOSAL ? SEPARATION OF OIL/WATER EMULSIONS IN THE METAL PROCESSING INDUSTRY (DRILLING AND SLIDING GRINDING EMULSIONS, AND THE LIKE) ? VOLUME REDUCTION OF PHOTOGRAPHIC SEWAGE WATER PRIOR TO INCINERATION AND/OR WASTE DISPOSAL ? CONCENTRATION OF PEG CONTAINING WATER THE ADVANTAGES OF THE VACUUM EVAPORATION PROCESS INCLUDE: ? GENTLE PRODUCT HANDLING ? LOW OPERATING AND MAINTENANCE EXPENDITURE ? LOW POWER CONSUMPTION DUE TO OPERATION WITH INTEGRATED HEAT PUMP (APPROX. 5 KW HEATING OUTPUT PER KW OF ELECTRIC DRIVE CAPACITY OF REFRIGERATING COMPRESSOR) ? FULLY AUTOMATIC OPERATION ? ALSO SUITABLE FOR HIGHLY AGGRESSIVE AND CHLORIDE CONTAINING MEDIA DUE TO THE USE OF HIGH ACID-RESISTANT MATERIALS ? HEAT RECOVERY POSSIBLE FOR LARGER SYSTEMS. USING HEAT RECOVERY IT IS POSSIBLE TO GENERATE INDUSTRIAL OR HEATING WATER WITH A TEMPERATURE OF UP TO APPROX. 50 °C.
Vendedor: AssistEquipment AS
Año de construcción: usado
Precio: 10.000 €
Ubicación: Land-omso dm 45 6-color, uv cup printer consisting of :-
accumulator tray feed
auto feed conveyor
universal screw denester
8 x mandrel indexing revolver turret
mandel spin motor
softal corona pretreatment
6 x dry offset print heads
double suction cup take-off to out feed conveyor
van dam 2 x lamp uv-curing tunnel
with 2 x hanovia uv-generators
van dam counter/ stacker with ejector tray
counted/ stacked cups returned to in feed position.
max. cup height 120 mm
max. cup dia. 130 mm
max. print length 395 mm
max. taper cup taper: 2° - 13°.
speed depending on shape & size of cups - 18,000/ hr
inclusive of vacuum pump
  OMSO DM 45 6-COLOR, UV CUP PRINTER CONSISTING OF :- ACCUMULATOR TRAY FEED AUTO FEED CONVEYOR UNIVERSAL SCREW DENESTER 8 X MANDREL INDEXING REVOLVER TURRET MANDEL SPIN MOTOR SOFTAL CORONA PRETREATMENT 6 X DRY OFFSET PRINT HEADS DOUBLE SUCTION CUP TAKE-OFF TO OUT FEED CONVEYOR VAN DAM 2 X LAMP UV-CURING TUNNEL WITH 2 X HANOVIA UV-GENERATORS VAN DAM COUNTER/ STACKER WITH EJECTOR TRAY COUNTED/ STACKED CUPS RETURNED TO IN FEED POSITION. MAX. CUP HEIGHT 120 MM MAX. CUP DIA. 130 MM MAX. PRINT LENGTH 395 MM MAX. TAPER CUP TAPER: 2° - 13°. SPEED DEPENDING ON SHAPE & SIZE OF CUPS - 18,000/ HR INCLUSIVE OF VACUUM PUMP
Vendedor: SAMPLAST INC.
Año de construcción: usado
Precio: 120 €
Ubicación: Land-posts 1600 pieces of level round screws with square beginning and mother
 16 cardboards a 100 pieces of innkeepers level round screws m10 x 45 mms to german institute for standardization 603, iso 8677
 goodness 4.6, galvanises
 original-packed, cardboards damages partly easily
 please, they follow the pdf file with our terms and conditions and order form.
 the machine can be brought forward with pleasure after appointment arrangement with us on site. we offer only machines which stand demonstration-ready in our camp, see weitere offers this anbieters.      POSTS 1600 PIECES OF LEVEL ROUND SCREWS WITH SQUARE BEGINNING AND MOTHER 16 CARDBOARDS A 100 PIECES OF INNKEEPERS LEVEL ROUND SCREWS M10 X 45 MMS TO GERMAN INSTITUTE FOR STANDARDIZATION 603, ISO 8677 GOODNESS 4.6, GALVANISES ORIGINAL-PACKED, CARDBOARDS DAMAGES PARTLY EASILY PLEASE, THEY FOLLOW THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE BROUGHT FORWARD WITH PLEASURE AFTER APPOINTMENT ARRANGEMENT WITH US ON SITE. WE OFFER ONLY MACHINES WHICH STAND DEMONSTRATION-READY IN OUR CAMP, SEE WEITERE OFFERS THIS ANBIETERS.
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Ubicación: Land-dear ladies and gentlemen,

 we can make you the following offer:

tree pick up machine of the highest quality

 to

buy, rent or lease



 valmet 921.1 harvester type
 (komatsu forest)
 in top condition

 our advantages

 lower operating costs
 whatever the weather,
 a productive,
 fewer workers,
 growing up,
 careful soil
 environmentally sound,
 less use of machinery,
 high production in strong stocks
 ecologically
 as branches and tree tops in the forest remain for fertilization

 year: 2003
 about 9000 hours of operation
 crane type valmet 1600
 cutting tool valmet 360
 nokian tyres 700/50x26.5
 equipment:

 maxi harvester, maxilog, air conditioning, blinds, heater, printer, halogen and xenon work lights, Ölfüllpumpe, central lubrication,
 fire extinguisher, radio, cab leveling, vacuum pump, air suspension seat with heated seats, automatic chain tension

the harvester has been tested and inspected and all necessary work has been performed.

 the state is ready for use.

please visit us to have view to the tree pick up machine.
pictures can be sent at short notice.

all prices are free destination world. following and all resulting costs are due to customer. 
vat is not included in the prices. 
contract agreements for every single offered item must be agreed on separately and are binding only after signing of contract. 
errors excepted. 
no guarantee for personal and material damages, caused by the buyer due to dismantling. court of competent jurisdiction shall be germany. all agreements are according to german law. a customer protection agreement (non-circumvention and non-disclosure) was settled according to icc paris, france. the seller will be the owner of all goods an material until payment was settled completely. 
all technical details, measurement specifications etc. are estimated specifications and not binding for the offerer. 
subject to prior sale. 
price upon request. 

kind regards, 

trade & translations
      DEAR LADIES AND GENTLEMEN, WE CAN MAKE YOU THE FOLLOWING OFFER: TREE PICK UP MACHINE OF THE HIGHEST QUALITY TO BUY, RENT OR LEASE VALMET 921.1 HARVESTER TYPE (KOMATSU FOREST) IN TOP CONDITION OUR ADVANTAGES LOWER OPERATING COSTS WHATEVER THE WEATHER, A PRODUCTIVE, FEWER WORKERS, GROWING UP, CAREFUL SOIL ENVIRONMENTALLY SOUND, LESS USE OF MACHINERY, HIGH PRODUCTION IN STRONG STOCKS ECOLOGICALLY AS BRANCHES AND TREE TOPS IN THE FOREST REMAIN FOR FERTILIZATION YEAR: 2003 ABOUT 9000 HOURS OF OPERATION CRANE TYPE VALMET 1600 CUTTING TOOL VALMET 360 NOKIAN TYRES 700/50X26.5 EQUIPMENT: MAXI HARVESTER, MAXILOG, AIR CONDITIONING, BLINDS, HEATER, PRINTER, HALOGEN AND XENON WORK LIGHTS, ÖLFüLLPUMPE, CENTRAL LUBRICATION, FIRE EXTINGUISHER, RADIO, CAB LEVELING, VACUUM PUMP, AIR SUSPENSION SEAT WITH HEATED SEATS, AUTOMATIC CHAIN TENSION THE HARVESTER HAS BEEN TESTED AND INSPECTED AND ALL NECESSARY WORK HAS BEEN PERFORMED. THE STATE IS READY FOR USE. PLEASE VISIT US TO HAVE VIEW TO THE TREE PICK UP MACHINE. PICTURES CAN BE SENT AT SHORT NOTICE. ALL PRICES ARE FREE DESTINATION WORLD. FOLLOWING AND ALL RESULTING COSTS ARE DUE TO CUSTOMER. VAT IS NOT INCLUDED IN THE PRICES. CONTRACT AGREEMENTS FOR EVERY SINGLE OFFERED ITEM MUST BE AGREED ON SEPARATELY AND ARE BINDING ONLY AFTER SIGNING OF CONTRACT. ERRORS EXCEPTED. NO GUARANTEE FOR PERSONAL AND MATERIAL DAMAGES, CAUSED BY THE BUYER DUE TO DISMANTLING. COURT OF COMPETENT JURISDICTION SHALL BE GERMANY. ALL AGREEMENTS ARE ACCORDING TO GERMAN LAW. A CUSTOMER PROTECTION AGREEMENT (NON-CIRCUMVENTION AND NON-DISCLOSURE) WAS SETTLED ACCORDING TO ICC PARIS, FRANCE. THE SELLER WILL BE THE OWNER OF ALL GOODS AN MATERIAL UNTIL PAYMENT WAS SETTLED COMPLETELY. ALL TECHNICAL DETAILS, MEASUREMENT SPECIFICATIONS ETC. ARE ESTIMATED SPECIFICATIONS AND NOT BINDING FOR THE OFFERER. SUBJECT TO PRIOR SALE. PRICE UPON REQUEST. KIND REGARDS, TRADE & TRANSLATIONS
Vendedor: Trade and Translations
Año de construcción: usado
Ubicación: Land-dear ladies and gentlemen,

 we can make you the following offer:

tree pick up machine of the highest quality

 to

buy, rent or lease



 valmet 921.1 harvester type
 (komatsu forest)
 in top condition

 our advantages

 lower operating costs
 whatever the weather,
 a productive,
 fewer workers,
 growing up,
 careful soil
 environmentally sound,
 less use of machinery,
 high production in strong stocks
 ecologically
 as branches and tree tops in the forest remain for fertilization

 year: 2003
 about 9000 hours of operation
 crane type valmet 1600
 cutting tool valmet 360
 nokian tyres 700/50x26.5
 equipment:

 maxi harvester, maxilog, air conditioning, blinds, heater, printer, halogen and xenon work lights, Ölfüllpumpe, central lubrication,
 fire extinguisher, radio, cab leveling, vacuum pump, air suspension seat with heated seats, automatic chain tension

the harvester has been tested and inspected and all necessary work has been performed.

 the state is ready for use.

please visit us to have view to the tree pick up machine.
pictures can be sent at short notice.

all prices are free destination world. following and all resulting costs are due to customer. 
vat is not included in the prices. 
contract agreements for every single offered item must be agreed on separately and are binding only after signing of contract. 
errors excepted. 
no guarantee for personal and material damages, caused by the buyer due to dismantling. court of competent jurisdiction shall be germany. all agreements are according to german law. a customer protection agreement (non-circumvention and non-disclosure) was settled according to icc paris, france. the seller will be the owner of all goods an material until payment was settled completely. 
all technical details, measurement specifications etc. are estimated specifications and not binding for the offerer. 
subject to prior sale. 
price upon request. 

kind regards, 

trade & translations
     DEAR LADIES AND GENTLEMEN, WE CAN MAKE YOU THE FOLLOWING OFFER: TREE PICK UP MACHINE OF THE HIGHEST QUALITY TO BUY, RENT OR LEASE VALMET 921.1 HARVESTER TYPE (KOMATSU FOREST) IN TOP CONDITION OUR ADVANTAGES LOWER OPERATING COSTS WHATEVER THE WEATHER, A PRODUCTIVE, FEWER WORKERS, GROWING UP, CAREFUL SOIL ENVIRONMENTALLY SOUND, LESS USE OF MACHINERY, HIGH PRODUCTION IN STRONG STOCKS ECOLOGICALLY AS BRANCHES AND TREE TOPS IN THE FOREST REMAIN FOR FERTILIZATION YEAR: 2003 ABOUT 9000 HOURS OF OPERATION CRANE TYPE VALMET 1600 CUTTING TOOL VALMET 360 NOKIAN TYRES 700/50X26.5 EQUIPMENT: MAXI HARVESTER, MAXILOG, AIR CONDITIONING, BLINDS, HEATER, PRINTER, HALOGEN AND XENON WORK LIGHTS, ÖLFüLLPUMPE, CENTRAL LUBRICATION, FIRE EXTINGUISHER, RADIO, CAB LEVELING, VACUUM PUMP, AIR SUSPENSION SEAT WITH HEATED SEATS, AUTOMATIC CHAIN TENSION THE HARVESTER HAS BEEN TESTED AND INSPECTED AND ALL NECESSARY WORK HAS BEEN PERFORMED. THE STATE IS READY FOR USE. PLEASE VISIT US TO HAVE VIEW TO THE TREE PICK UP MACHINE. PICTURES CAN BE SENT AT SHORT NOTICE. ALL PRICES ARE FREE DESTINATION WORLD. FOLLOWING AND ALL RESULTING COSTS ARE DUE TO CUSTOMER. VAT IS NOT INCLUDED IN THE PRICES. CONTRACT AGREEMENTS FOR EVERY SINGLE OFFERED ITEM MUST BE AGREED ON SEPARATELY AND ARE BINDING ONLY AFTER SIGNING OF CONTRACT. ERRORS EXCEPTED. NO GUARANTEE FOR PERSONAL AND MATERIAL DAMAGES, CAUSED BY THE BUYER DUE TO DISMANTLING. COURT OF COMPETENT JURISDICTION SHALL BE GERMANY. ALL AGREEMENTS ARE ACCORDING TO GERMAN LAW. A CUSTOMER PROTECTION AGREEMENT (NON-CIRCUMVENTION AND NON-DISCLOSURE) WAS SETTLED ACCORDING TO ICC PARIS, FRANCE. THE SELLER WILL BE THE OWNER OF ALL GOODS AN MATERIAL UNTIL PAYMENT WAS SETTLED COMPLETELY. ALL TECHNICAL DETAILS, MEASUREMENT SPECIFICATIONS ETC. ARE ESTIMATED SPECIFICATIONS AND NOT BINDING FOR THE OFFERER. SUBJECT TO PRIOR SALE. PRICE UPON REQUEST. KIND REGARDS, TRADE & TRANSLATIONS
Vendedor: Trade and Translations
Año de construcción: usado
Ubicación: Land-dear ladies and gentlemen,

 we can make you the following offer:

tree pick up machine of the highest quality

 to
 buy, rent or lease



 valmet 921.1 harvester type
 (komatsu forest)
 in top condition

 our advantages

 lower operating costs
 whatever the weather,
 a productive,
 fewer workers,
 growing up,
 careful soil
 environmentally sound,
 less use of machinery,
 high production in strong stocks
 ecologically
 as branches and tree tops in the forest remain for fertilization

 year: 2003
 about 9000 hours of operation
 crane type valmet 1600
 cutting tool valmet 360
 nokian tyres 700/50x26.5
 equipment:

 maxi harvester, maxilog, air conditioning, blinds, heater, printer, halogen and xenon work lights, Ölfüllpumpe, central lubrication,
 fire extinguisher, radio, cab leveling, vacuum pump, air suspension seat with heated seats, automatic chain tension

the harvester has been tested and inspected and all necessary work has been performed.

 the state is ready for use.

please visit us to have view to the tree pick up machine.
pictures can be sent at short notice.

all prices are free destination world. following and all resulting costs are due to customer. 
vat is not included in the prices. 
contract agreements for every single offered item must be agreed on separately and are binding only after signing of contract. 
errors excepted. 
no guarantee for personal and material damages, caused by the buyer due to dismantling. court of competent jurisdiction shall be germany. all agreements are according to german law. a customer protection agreement (non-circumvention and non-disclosure) was settled according to icc paris, france. the seller will be the owner of all goods an material until payment was settled completely. 
all technical details, measurement specifications etc. are estimated specifications and not binding for the offerer. 
subject to prior sale. 
price upon request. 

kind regards, 

trade & translations 
      DEAR LADIES AND GENTLEMEN, WE CAN MAKE YOU THE FOLLOWING OFFER: TREE PICK UP MACHINE OF THE HIGHEST QUALITY TO BUY, RENT OR LEASE VALMET 921.1 HARVESTER TYPE (KOMATSU FOREST) IN TOP CONDITION OUR ADVANTAGES LOWER OPERATING COSTS WHATEVER THE WEATHER, A PRODUCTIVE, FEWER WORKERS, GROWING UP, CAREFUL SOIL ENVIRONMENTALLY SOUND, LESS USE OF MACHINERY, HIGH PRODUCTION IN STRONG STOCKS ECOLOGICALLY AS BRANCHES AND TREE TOPS IN THE FOREST REMAIN FOR FERTILIZATION YEAR: 2003 ABOUT 9000 HOURS OF OPERATION CRANE TYPE VALMET 1600 CUTTING TOOL VALMET 360 NOKIAN TYRES 700/50X26.5 EQUIPMENT: MAXI HARVESTER, MAXILOG, AIR CONDITIONING, BLINDS, HEATER, PRINTER, HALOGEN AND XENON WORK LIGHTS, ÖLFüLLPUMPE, CENTRAL LUBRICATION, FIRE EXTINGUISHER, RADIO, CAB LEVELING, VACUUM PUMP, AIR SUSPENSION SEAT WITH HEATED SEATS, AUTOMATIC CHAIN TENSION THE HARVESTER HAS BEEN TESTED AND INSPECTED AND ALL NECESSARY WORK HAS BEEN PERFORMED. THE STATE IS READY FOR USE. PLEASE VISIT US TO HAVE VIEW TO THE TREE PICK UP MACHINE. PICTURES CAN BE SENT AT SHORT NOTICE. ALL PRICES ARE FREE DESTINATION WORLD. FOLLOWING AND ALL RESULTING COSTS ARE DUE TO CUSTOMER. VAT IS NOT INCLUDED IN THE PRICES. CONTRACT AGREEMENTS FOR EVERY SINGLE OFFERED ITEM MUST BE AGREED ON SEPARATELY AND ARE BINDING ONLY AFTER SIGNING OF CONTRACT. ERRORS EXCEPTED. NO GUARANTEE FOR PERSONAL AND MATERIAL DAMAGES, CAUSED BY THE BUYER DUE TO DISMANTLING. COURT OF COMPETENT JURISDICTION SHALL BE GERMANY. ALL AGREEMENTS ARE ACCORDING TO GERMAN LAW. A CUSTOMER PROTECTION AGREEMENT (NON-CIRCUMVENTION AND NON-DISCLOSURE) WAS SETTLED ACCORDING TO ICC PARIS, FRANCE. THE SELLER WILL BE THE OWNER OF ALL GOODS AN MATERIAL UNTIL PAYMENT WAS SETTLED COMPLETELY. ALL TECHNICAL DETAILS, MEASUREMENT SPECIFICATIONS ETC. ARE ESTIMATED SPECIFICATIONS AND NOT BINDING FOR THE OFFERER. SUBJECT TO PRIOR SALE. PRICE UPON REQUEST. KIND REGARDS, TRADE & TRANSLATIONS
Vendedor: Trade and Translations
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)