7327 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Precio: 24.000 €
Ubicación: Land-flat grinding machine, almost unused, condition almost like new

manufacturer bernardo
    type bsg 4080 ahd
    year 2014
    almost unused, absolutely mint condition, estimated about 50 operating hours

electric magnetic clamping plate 800 x 400 mm
    table size approx. 910 x 405 mm
    travel in x 900 mm
    travel in y 450 mm
    holder diameter 400 mm
    maximum workpiece height 370 mm
    maximum work-piece weight 500 kg

with micrometer-carbide pulley puller
    hydraulic feed in x (longitudinal) 7 up to 23 meters per minute
    feed in y 0.1 to 8 mm per stroke
    automatic vertical (z) - delivery: 0.005 / 0.01 / 0.02 / 0.03 / 0.04 and 0.05 mm

accessories:
    flow filter grinding oil treatment
    hydraulic unit with oil cooling
    digital display bernardo sds6-2v

dimensions and weights:

basic machine
    w x d x h in cm: 270 x 230 x 190
    weight of 3,400 kg

fine filter: l x w 140 cm x 80 cm

hydraulic unit l x w 70 x 60 cm
  FLAT GRINDING MACHINE, ALMOST UNUSED, CONDITION ALMOST LIKE NEW MANUFACTURER BERNARDO TYPE BSG 4080 AHD YEAR 2014 ALMOST UNUSED, ABSOLUTELY MINT CONDITION, ESTIMATED ABOUT 50 OPERATING HOURS ELECTRIC MAGNETIC CLAMPING PLATE 800 X 400 MM TABLE SIZE APPROX. 910 X 405 MM TRAVEL IN X 900 MM TRAVEL IN Y 450 MM HOLDER DIAMETER 400 MM MAXIMUM WORKPIECE HEIGHT 370 MM MAXIMUM WORK-PIECE WEIGHT 500 KG WITH MICROMETER-CARBIDE PULLEY PULLER HYDRAULIC FEED IN X (LONGITUDINAL) 7 UP TO 23 METERS PER MINUTE FEED IN Y 0.1 TO 8 MM PER STROKE AUTOMATIC VERTICAL (Z) - DELIVERY: 0.005 / 0.01 / 0.02 / 0.03 / 0.04 AND 0.05 MM ACCESSORIES: FLOW FILTER GRINDING OIL TREATMENT HYDRAULIC UNIT WITH OIL COOLING DIGITAL DISPLAY BERNARDO SDS6-2V DIMENSIONS AND WEIGHTS: BASIC MACHINE W X D X H IN CM: 270 X 230 X 190 WEIGHT OF 3,400 KG FINE FILTER: L X W 140 CM X 80 CM HYDRAULIC UNIT L X W 70 X 60 CM
Vendedor: Umrath Handel & Verwertung
Año de construcción: usado
Ubicación: Land-grinder, pin disc mill, make alpine augsburg, type a-400 cw contraplex weitkammer, no 128316, new 1963, material mild steel, 2 driven rotors, rotor size dia. 400mm, number of pins on door side: 134 stk, house size +/- 1100x1350mm, motor 11,0 kw (housing) + 30 kw (door), 380/660 volt, with switchgear, floorspace 1,9x1,0m, total height 1,3m, weight 1500kg, extra specifications +++ revised +++size reduction millsgrinders > size reduction mills GRINDER, PIN DISC MILL, MAKE ALPINE AUGSBURG, TYPE A-400 CW CONTRAPLEX WEITKAMMER, NO 128316, NEW 1963, MATERIAL MILD STEEL, 2 DRIVEN ROTORS, ROTOR SIZE DIA. 400MM, NUMBER OF PINS ON DOOR SIDE: 134 STK, HOUSE SIZE +/- 1100X1350MM, MOTOR 11,0 KW (HOUSING) + 30 KW (DOOR), 380/660 VOLT, WITH SWITCHGEAR, FLOORSPACE 1,9X1,0M, TOTAL HEIGHT 1,3M, WEIGHT 1500KG, EXTRA SPECIFICATIONS +++ REVISED +++SIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-width 400 mm WIDTH 400 MM
Vendedor: Mr Artur Morgenshteyn
Año de construcción: usado
Precio: 350 €
Ubicación: Land-schneider ins 250 breaker, schneider ins250 breaker, schakelaar SCHNEIDER INS 250 BREAKER, SCHNEIDER INS250 BREAKER, SCHAKELAAR
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-tip height: 300 / 330 mm
top width: 3000 mm
speed range: 12-600 rpm
spindle bore: 83 mm
total power: 7.5 kw / 380 v
machine weight: about 5000 kg

equipment / accessories

4 jaw chuck
1 festst. lynette
mitlfd. lathe
4 way toolpost
chip protection tray
coolant system

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
each party has the opportunity to test the machine before making a purchase in our factory under power.
 TIP HEIGHT: 300 / 330 MM TOP WIDTH: 3000 MM SPEED RANGE: 12-600 RPM SPINDLE BORE: 83 MM TOTAL POWER: 7.5 KW / 380 V MACHINE WEIGHT: ABOUT 5000 KG EQUIPMENT / ACCESSORIES 4 JAW CHUCK 1 FESTST. LYNETTE MITLFD. LATHE 4 WAY TOOLPOST CHIP PROTECTION TRAY COOLANT SYSTEM ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EACH PARTY HAS THE OPPORTUNITY TO TEST THE MACHINE BEFORE MAKING A PURCHASE IN OUR FACTORY UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Precio: 16.900 €
Ubicación: Land-; gross weight [kg]: 7435; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 7435; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 45.000 €
Ubicación: Land-control                                   heidenhain plus it
circular diameter max.                    505 mm 
swing over plan guide                     375 mm 
travel plan (x)                           250 mm
longitudinal travel (z)                   635 mm 
spindle integrated spindle motor, power 40/100%ed 28/21 kw 
spindle head (flat flange)                5 170 h 
spindle diameter in front bearing         130 mm 
torque max (40 / 100%)                    320/240 nm
speed range                          25-5,000 rpm
number of tool stations of the tool carrier 12
shank according to din 69880              30 mm
tailstock hub automatically movable      580 mm
weight of the machine with chip conveyor 5,600 kg
dimensions l/w/h 4,3 m / 2,022 m / 1.77 m

accessories: feeder imeca master 880 mp-e

 CONTROL HEIDENHAIN PLUS IT CIRCULAR DIAMETER MAX. 505 MM SWING OVER PLAN GUIDE 375 MM TRAVEL PLAN (X) 250 MM LONGITUDINAL TRAVEL (Z) 635 MM SPINDLE INTEGRATED SPINDLE MOTOR, POWER 40/100%ED 28/21 KW SPINDLE HEAD (FLAT FLANGE) 5 170 H SPINDLE DIAMETER IN FRONT BEARING 130 MM TORQUE MAX (40 / 100%) 320/240 NM SPEED RANGE 25-5,000 RPM NUMBER OF TOOL STATIONS OF THE TOOL CARRIER 12 SHANK ACCORDING TO DIN 69880 30 MM TAILSTOCK HUB AUTOMATICALLY MOVABLE 580 MM WEIGHT OF THE MACHINE WITH CHIP CONVEYOR 5,600 KG DIMENSIONS L/W/H 4,3 M / 2,022 M / 1.77 M ACCESSORIES: FEEDER IMECA MASTER 880 MP-E
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Precio: 16.900 €
Ubicación: Land-; gross weight [kg]: 7460; rear tyres remaining: 50; front tyres remaining: 50; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 7460; REAR TYRES REMAINING: 50; FRONT TYRES REMAINING: 50; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 5.500 €
Ubicación: Land-very little used frame and drilling machine series of gannomat

specifically to the dowel hole drilling at two levels in one clamping
drill level pneumatically adjustable

motor 1,5 kw, 2800 rpm
start the engine with practical handle switch
two-jaw chuck rã¶hm 1 to 20 mm
maximum height approx. 100 mm
maximum stroke 150 mm
cross adjustment 320 mm continuously variable
2 pneumatic workpiece clamping system
grid rail for quick adjustment side to side, scanning 12 mm
stroke length adjustment with recesses
suction pipe
center stop
double bevel stop adjustable from 0 to 60 degrees
height adjustment for upper and lower level with mechanical digital display and pneumatic switching
two way adjustable work-piece supports role

a high-quality universal drilling machine for many applications
obviously extremely rarely used, see photos. comes from a small assembly operation.

ce mark

dimensions approx. 1000 x 900 x 1250 mm (lxwxh). weight approx. 300kg.

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". VERY LITTLE USED FRAME AND DRILLING MACHINE SERIES OF GANNOMAT SPECIFICALLY TO THE DOWEL HOLE DRILLING AT TWO LEVELS IN ONE CLAMPING DRILL LEVEL PNEUMATICALLY ADJUSTABLE MOTOR 1,5 KW, 2800 RPM START THE ENGINE WITH PRACTICAL HANDLE SWITCH TWO-JAW CHUCK RöHM 1 TO 20 MM MAXIMUM HEIGHT APPROX. 100 MM MAXIMUM STROKE 150 MM CROSS ADJUSTMENT 320 MM CONTINUOUSLY VARIABLE 2 PNEUMATIC WORKPIECE CLAMPING SYSTEM GRID RAIL FOR QUICK ADJUSTMENT SIDE TO SIDE, SCANNING 12 MM STROKE LENGTH ADJUSTMENT WITH RECESSES SUCTION PIPE CENTER STOP DOUBLE BEVEL STOP ADJUSTABLE FROM 0 TO 60 DEGREES HEIGHT ADJUSTMENT FOR UPPER AND LOWER LEVEL WITH MECHANICAL DIGITAL DISPLAY AND PNEUMATIC SWITCHING TWO WAY ADJUSTABLE WORK-PIECE SUPPORTS ROLE A HIGH-QUALITY UNIVERSAL DRILLING MACHINE FOR MANY APPLICATIONS OBVIOUSLY EXTREMELY RARELY USED, SEE PHOTOS. COMES FROM A SMALL ASSEMBLY OPERATION. CE MARK DIMENSIONS APPROX. 1000 X 900 X 1250 MM (LXWXH). WEIGHT APPROX. 300KG. PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Precio: 16.900 €
Ubicación: Land-; gross weight [kg]: 7450; rear tyres remaining: 50; front tyres remaining: 50; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 7450; REAR TYRES REMAINING: 50; FRONT TYRES REMAINING: 50; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-it is a used shop equipment - sales counter for sale from site fichtenau.
the interior is like new and was used only two months.
the charging device is sold in the sales order. 

price on request. IT IS A USED SHOP EQUIPMENT - SALES COUNTER FOR SALE FROM SITE FICHTENAU. THE INTERIOR IS LIKE NEW AND WAS USED ONLY TWO MONTHS. THE CHARGING DEVICE IS SOLD IN THE SALES ORDER. PRICE ON REQUEST.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 5900; rear tyres remaining: 92; front tyres remaining: 92; inspection date: 2018; amount of previous owners: 1; maximum lift capacity [kg]: 200; full service history: ja ; GROSS WEIGHT [KG]: 5900; REAR TYRES REMAINING: 92; FRONT TYRES REMAINING: 92; INSPECTION DATE: 2018; AMOUNT OF PREVIOUS OWNERS: 1; MAXIMUM LIFT CAPACITY [KG]: 200; FULL SERVICE HISTORY: JA
Vendedor: Rothlehner Arbeitsbühnen GmbH
Año de construcción: usado
Precio: 1.900 €
Ubicación: Land-glue specification unit for dowel holes and rueckwandnuten

a video of the current machine can be sent on request.

with an ergonomic lighter gun to the stating of glue in dowel holes etc.
closed glue system, this little cleaning effort
stainless steel tank for 5 l glue
stainless steel tank for 5 l of water (to clean)
rinsing process takes only about 1 minute!
selector water / glue for fast commissioning and cleaning
glue quantity easy selector switch adjustable interval trigger for constant adjustable quantity of glue or permanent operation
ideal complement to an automated drilling and dowel system.
electrical connection 230 volt
6 bar air connection
ce mark
operating instructions
original condition in the photos
has been used very little, looks almost like new.

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". GLUE SPECIFICATION UNIT FOR DOWEL HOLES AND RUECKWANDNUTEN A VIDEO OF THE CURRENT MACHINE CAN BE SENT ON REQUEST. WITH AN ERGONOMIC LIGHTER GUN TO THE STATING OF GLUE IN DOWEL HOLES ETC. CLOSED GLUE SYSTEM, THIS LITTLE CLEANING EFFORT STAINLESS STEEL TANK FOR 5 L GLUE STAINLESS STEEL TANK FOR 5 L OF WATER (TO CLEAN) RINSING PROCESS TAKES ONLY ABOUT 1 MINUTE! SELECTOR WATER / GLUE FOR FAST COMMISSIONING AND CLEANING GLUE QUANTITY EASY SELECTOR SWITCH ADJUSTABLE INTERVAL TRIGGER FOR CONSTANT ADJUSTABLE QUANTITY OF GLUE OR PERMANENT OPERATION IDEAL COMPLEMENT TO AN AUTOMATED DRILLING AND DOWEL SYSTEM. ELECTRICAL CONNECTION 230 VOLT 6 BAR AIR CONNECTION CE MARK OPERATING INSTRUCTIONS ORIGINAL CONDITION IN THE PHOTOS HAS BEEN USED VERY LITTLE, LOOKS ALMOST LIKE NEW. PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6300; rear tyres remaining: 85; front tyres remaining: 85; inspection date: 2018; amount of previous owners: 1; maximum lift capacity [kg]: 200; full service history: ja ; GROSS WEIGHT [KG]: 6300; REAR TYRES REMAINING: 85; FRONT TYRES REMAINING: 85; INSPECTION DATE: 2018; AMOUNT OF PREVIOUS OWNERS: 1; MAXIMUM LIFT CAPACITY [KG]: 200; FULL SERVICE HISTORY: JA
Vendedor: Rothlehner Arbeitsbühnen GmbH
Año de construcción: usado
Precio: 5.500 €
Ubicación: Land-in technically and visually good condition.

the primus-series is the smallest conventional precision lathe, builds the hamlet for decades.
this machine has decades long proven in the single parts and small series production, in craft & industry, education, training, tool and fixture construction. all feeds, longitudinal & transverse including the castle nut thread termination function correctly and perfectly, the same applies to heidenhain position display the entire controls of the machine including the bed plan - and upper carriage, tailstock and the digital.

the bed are over the entire working surface in very good condition (see pictures). all spindles of the machine have little game are smooth-running in all directions (+-) adjustable by hand. the machine, a quick change toolpost multifix is type a (incl. 3 x steel holder) as well as a rã¶hm three-jaw chuck ã? 125 mm mounted.

this machine is in good allgemeinzustand.an of this site we want to withhold but also, the machine base has received a new paint job guess by the former owner, all from quite some time ago. this lathe comes from a private estate.
this used lathe provides you with a cost-effective alternative to a new machine that is ready for use.

technical details:

workspace:

tip height: 120 mm
top width: 430 mm
umlaufdurschmesser the bed: 245mm
belt levels drive
spindle speeds 16; by 150-3200 u/min
tailstock:

quill stroke: 80mm
taper: mk2
accessories:

digital position indicator / heidenhain vrz 710
three-jaw chuck / rã¶hm ã? 125 mm with indoor & outdoor baking set
muli fix quick change toolpost size a incl. 3 removable steel holders
chuck ã? 0-16mm
revolving lathe
bed stops
turning tool setter
control key
connection, mass & weight:

connection: 1,3kw / 380 volt with cee plug
dimensions: l 1160mm x w 650mm x h 1230mm
weight approx. 360 kg.
a tour / presentation can be pleased by appointment.

gladly we also supply, additional transport costs are created here however, depending on the location, we therefore ask for prior consultation.
  IN TECHNICALLY AND VISUALLY GOOD CONDITION. THE PRIMUS-SERIES IS THE SMALLEST CONVENTIONAL PRECISION LATHE, BUILDS THE HAMLET FOR DECADES. THIS MACHINE HAS DECADES LONG PROVEN IN THE SINGLE PARTS AND SMALL SERIES PRODUCTION, IN CRAFT & INDUSTRY, EDUCATION, TRAINING, TOOL AND FIXTURE CONSTRUCTION. ALL FEEDS, LONGITUDINAL & TRANSVERSE INCLUDING THE CASTLE NUT THREAD TERMINATION FUNCTION CORRECTLY AND PERFECTLY, THE SAME APPLIES TO HEIDENHAIN POSITION DISPLAY THE ENTIRE CONTROLS OF THE MACHINE INCLUDING THE BED PLAN - AND UPPER CARRIAGE, TAILSTOCK AND THE DIGITAL. THE BED ARE OVER THE ENTIRE WORKING SURFACE IN VERY GOOD CONDITION (SEE PICTURES). ALL SPINDLES OF THE MACHINE HAVE LITTLE GAME ARE SMOOTH-RUNNING IN ALL DIRECTIONS (+-) ADJUSTABLE BY HAND. THE MACHINE, A QUICK CHANGE TOOLPOST MULTIFIX IS TYPE A (INCL. 3 X STEEL HOLDER) AS WELL AS A RöHM THREE-JAW CHUCK � 125 MM MOUNTED. THIS MACHINE IS IN GOOD ALLGEMEINZUSTAND.AN OF THIS SITE WE WANT TO WITHHOLD BUT ALSO, THE MACHINE BASE HAS RECEIVED A NEW PAINT JOB GUESS BY THE FORMER OWNER, ALL FROM QUITE SOME TIME AGO. THIS LATHE COMES FROM A PRIVATE ESTATE. THIS USED LATHE PROVIDES YOU WITH A COST-EFFECTIVE ALTERNATIVE TO A NEW MACHINE THAT IS READY FOR USE. TECHNICAL DETAILS: WORKSPACE: TIP HEIGHT: 120 MM TOP WIDTH: 430 MM UMLAUFDURSCHMESSER THE BED: 245MM BELT LEVELS DRIVE SPINDLE SPEEDS 16; BY 150-3200 U/MIN TAILSTOCK: QUILL STROKE: 80MM TAPER: MK2 ACCESSORIES: DIGITAL POSITION INDICATOR / HEIDENHAIN VRZ 710 THREE-JAW CHUCK / RöHM � 125 MM WITH INDOOR & OUTDOOR BAKING SET MULI FIX QUICK CHANGE TOOLPOST SIZE A INCL. 3 REMOVABLE STEEL HOLDERS CHUCK � 0-16MM REVOLVING LATHE BED STOPS TURNING TOOL SETTER CONTROL KEY CONNECTION, MASS & WEIGHT: CONNECTION: 1,3KW / 380 VOLT WITH CEE PLUG DIMENSIONS: L 1160MM X W 650MM X H 1230MM WEIGHT APPROX. 360 KG. A TOUR / PRESENTATION CAN BE PLEASED BY APPOINTMENT. GLADLY WE ALSO SUPPLY, ADDITIONAL TRANSPORT COSTS ARE CREATED HERE HOWEVER, DEPENDING ON THE LOCATION, WE THEREFORE ASK FOR PRIOR CONSULTATION.
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Precio: 5.800 €
Ubicación: Land-; accessories: beleuchtung/warntafeln, plane ; ACCESSORIES: BELEUCHTUNG/WARNTAFELN, PLANE
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Precio: 19.000 €
Ubicación: Land-
machine type cnc lathe - inclined bed machine make schaublin type 110 cnc built 1998 control type cnc storage france country of origin switzerland delivery immediately cargo base stock technical details

turning diameter 420 mm turning length 300 mm control fanuc 18 t c-axis 0.001 degree speed 1750-5000 r/min turret 8 powered tools turning diameter over bed 420 mm additional information

turning diameter over bed 420 mm
 spindle bore 32 mm
 turning diameter 120 mm
 sled:
 longitudinal travel (z axis) 300 mm
 plan travel (x-axis) 180 mm
 c axis live tools turret sled: number 1
 number of positions revolver 8
 driven tools revolver 8
 spindle retainer:
 camlock
 spindle speeds:
 continuously variable
 30 rpm
 up to 5000 rpm
 without reitstock-:

feeds:
 continuously variable
 length of 0 mm/min
 up to 10000 mm/min
 map of 0 mm/min
 up to 6000 mm/min
 rapid traverse 12 m / min
 connection 50 hz 3 x 380 volt
 kw spindle motor 150 100%
 total power consumption 18 kva
 machine weight 3250 kg

miscellaneous accessories:
 clamping tongs recording
 lighting
 coolant system
 splash guard cabin complete
 central lubrication system
 electronic handwheel
 interface rs 232
 workpiece remover
 chip conveyor / / tensioning clamp device
 10 piece tool holder
 5 powered holder
 rod loader samsys 3000 MACHINE TYPE CNC LATHE - INCLINED BED MACHINE MAKE SCHAUBLIN TYPE 110 CNC BUILT 1998 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN SWITZERLAND DELIVERY IMMEDIATELY CARGO BASE STOCK TECHNICAL DETAILS TURNING DIAMETER 420 MM TURNING LENGTH 300 MM CONTROL FANUC 18 T C-AXIS 0.001 DEGREE SPEED 1750-5000 R/MIN TURRET 8 POWERED TOOLS TURNING DIAMETER OVER BED 420 MM ADDITIONAL INFORMATION TURNING DIAMETER OVER BED 420 MM SPINDLE BORE 32 MM TURNING DIAMETER 120 MM SLED: LONGITUDINAL TRAVEL (Z AXIS) 300 MM PLAN TRAVEL (X-AXIS) 180 MM C AXIS LIVE TOOLS TURRET SLED: NUMBER 1 NUMBER OF POSITIONS REVOLVER 8 DRIVEN TOOLS REVOLVER 8 SPINDLE RETAINER: CAMLOCK SPINDLE SPEEDS: CONTINUOUSLY VARIABLE 30 RPM UP TO 5000 RPM WITHOUT REITSTOCK-: FEEDS: CONTINUOUSLY VARIABLE LENGTH OF 0 MM/MIN UP TO 10000 MM/MIN MAP OF 0 MM/MIN UP TO 6000 MM/MIN RAPID TRAVERSE 12 M / MIN CONNECTION 50 HZ 3 X 380 VOLT KW SPINDLE MOTOR 150 100% TOTAL POWER CONSUMPTION 18 KVA MACHINE WEIGHT 3250 KG MISCELLANEOUS ACCESSORIES: CLAMPING TONGS RECORDING LIGHTING COOLANT SYSTEM SPLASH GUARD CABIN COMPLETE CENTRAL LUBRICATION SYSTEM ELECTRONIC HANDWHEEL INTERFACE RS 232 WORKPIECE REMOVER CHIP CONVEYOR / / TENSIONING CLAMP DEVICE 10 PIECE TOOL HOLDER 5 POWERED HOLDER ROD LOADER SAMSYS 3000
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-; power [ps]: 8; gross weight [kg]: 400; engine: hatz 1b40 ; POWER [PS]: 8; GROSS WEIGHT [KG]: 400; ENGINE: HATZ 1B40
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Precio: 27.000 €
Ubicación: Land-
machine type cnc lathe make nakamura type sc 300 built 1997 3 axis control type cnc storage france country of origin japan delivery time upon request from site of cargo base ex work technical details
turning diameter 350 mm turning length 600 mm cnc fanuc 21 t turning diameter over slide 300 mm speed 3500 r/min rapid traverse 20 / 25 (x, z) m/min power 22 kw additional information
it very good preserved machine with fanuc 21
 3 axis machine
 drehlange 600 12 expert revolver type japanese
 10 fixed holder 4 powered holder
 spaenefoederer
 feed dia 250mm
 accessories baking + holder  MACHINE TYPE CNC LATHE MAKE NAKAMURA TYPE SC 300 BUILT 1997 3 AXIS CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN JAPAN DELIVERY TIME UPON REQUEST FROM SITE OF CARGO BASE EX WORK TECHNICAL DETAILS TURNING DIAMETER 350 MM TURNING LENGTH 600 MM CNC FANUC 21 T TURNING DIAMETER OVER SLIDE 300 MM SPEED 3500 R/MIN RAPID TRAVERSE 20 / 25 (X, Z) M/MIN POWER 22 KW ADDITIONAL INFORMATION IT VERY GOOD PRESERVED MACHINE WITH FANUC 21 3 AXIS MACHINE DREHLANGE 600 12 EXPERT REVOLVER TYPE JAPANESE 10 FIXED HOLDER 4 POWERED HOLDER SPAENEFOEDERER FEED DIA 250MM ACCESSORIES BAKING + HOLDER
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-; power [ps]: 8; gross weight [kg]: 405; engine: hatz 1b40 ; POWER [PS]: 8; GROSS WEIGHT [KG]: 405; ENGINE: HATZ 1B40
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-complete pringles chip production line. (900 kg hr)
mostly built 2006

s/s super sack unloading station. 
sweco 30 in stainless steel 2-deck vibratory separator.
 advanced food systems model abm1000 1,000 lb. s/s batch mixer with 150 hp drive,
 1200 rpm with approximately 20 hp scraper and allen bradley panel view plus 1000 color touch screen operator controller and s/s two door electrical enclosure.
 machintek s/s hydraulic two roll sheeter with 18 in diameter x 42 in wide jacketed rollers,
 heat exchanger, top mounted feed hopper, remote electrical enclosure with allen bradley panel view plus 1000 color touch screen operator controller,
 s/s eight step elevated operator platform.
 heat and control 2,200 lbs. per hour fryer, 46 in wide x 40 ft. long, including 44 in wide infeed conveyor, s/s with heat and control heat exchanger, (2) - 54 in diameter x 6 ft. high s/s jacketed oil tanks with dish bottom, 2 in center bottom outlet, (3) - s/s legs, pioneer 30 hp centrifugal pump,
 1 hp stainless steel centrifugal pump,
 heat and control oil separator,
 heat and control exhaust system,
 allen bradley remote panelview plus 1000 color touch screen operator controller.
 30 in x 48 in seasoning tumbler, s/s shell, plastic interior liners,
 season applicator, 
poly diaphragm pump and 6 ft. x 8 ft.
 s/s elevated platform with guard rails and stair access.
no packing included
 COMPLETE PRINGLES CHIP PRODUCTION LINE. (900 KG HR) MOSTLY BUILT 2006 S/S SUPER SACK UNLOADING STATION. SWECO 30 IN STAINLESS STEEL 2-DECK VIBRATORY SEPARATOR. ADVANCED FOOD SYSTEMS MODEL ABM1000 1,000 LB. S/S BATCH MIXER WITH 150 HP DRIVE, 1200 RPM WITH APPROXIMATELY 20 HP SCRAPER AND ALLEN BRADLEY PANEL VIEW PLUS 1000 COLOR TOUCH SCREEN OPERATOR CONTROLLER AND S/S TWO DOOR ELECTRICAL ENCLOSURE. MACHINTEK S/S HYDRAULIC TWO ROLL SHEETER WITH 18 IN DIAMETER X 42 IN WIDE JACKETED ROLLERS, HEAT EXCHANGER, TOP MOUNTED FEED HOPPER, REMOTE ELECTRICAL ENCLOSURE WITH ALLEN BRADLEY PANEL VIEW PLUS 1000 COLOR TOUCH SCREEN OPERATOR CONTROLLER, S/S EIGHT STEP ELEVATED OPERATOR PLATFORM. HEAT AND CONTROL 2,200 LBS. PER HOUR FRYER, 46 IN WIDE X 40 FT. LONG, INCLUDING 44 IN WIDE INFEED CONVEYOR, S/S WITH HEAT AND CONTROL HEAT EXCHANGER, (2) - 54 IN DIAMETER X 6 FT. HIGH S/S JACKETED OIL TANKS WITH DISH BOTTOM, 2 IN CENTER BOTTOM OUTLET, (3) - S/S LEGS, PIONEER 30 HP CENTRIFUGAL PUMP, 1 HP STAINLESS STEEL CENTRIFUGAL PUMP, HEAT AND CONTROL OIL SEPARATOR, HEAT AND CONTROL EXHAUST SYSTEM, ALLEN BRADLEY REMOTE PANELVIEW PLUS 1000 COLOR TOUCH SCREEN OPERATOR CONTROLLER. 30 IN X 48 IN SEASONING TUMBLER, S/S SHELL, PLASTIC INTERIOR LINERS, SEASON APPLICATOR, POLY DIAPHRAGM PUMP AND 6 FT. X 8 FT. S/S ELEVATED PLATFORM WITH GUARD RAILS AND STAIR ACCESS. NO PACKING INCLUDED
Vendedor: Crezta Food Equipment
Año de construcción: usado
Ubicación: Land-220 kg; power [ps]: 4; gross weight [kg]: 220; engine: hatz1b20 220 KG; POWER [PS]: 4; GROSS WEIGHT [KG]: 220; ENGINE: HATZ1B20
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Precio: 49.000 €
Ubicación: Land-engine details

stock number 1105-02499 machine type cnc lathe - inclined bed machine make gildemeister type ctx 320 v6 built in 2003 control type cnc storage france country of origin germany delivery immediately from stock of based on cargo from site work technical details

turning diameter 505 mm turning length 450 mm control siemens 840 d shop mill lining diameter 210 mm rod diameter 51 mm turning diameter over bed slide 375 x way 213 mm z-axis 450 mm spindle speeds 25-6000 rpm spindle motor 16 / 12 kw torque on the s pindel 153 / 115 nm rapid traverse - longitudinal/plan 60/12/45 m / min c-axis 0.001 / 360 Ⱐnumber of driven tools 12 mm 㸠30 mm power 9 / 6.7 kw speed range 4500 / 4000 kw/rpm total power requirement 29 machine weight approx. 3.7 tonnes of space c a. 3.0 x 2.2 x 2.0 m accessories main and sub spindle yes and y axis c - axis 0.001 Ⱐfor main u.gegenspindel y - axis +-40 mm 12 angetr. coolant system chip conveyor additional information tools

well preserved machine
 with counter spindle
 4 axis machine
 c axis and y axe
 5 live tools + 10 fixed tools
 spaenefoerderer
 cnc siemens 840 d shop mill ENGINE DETAILS STOCK NUMBER 1105-02499 MACHINE TYPE CNC LATHE - INCLINED BED MACHINE MAKE GILDEMEISTER TYPE CTX 320 V6 BUILT IN 2003 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN GERMANY DELIVERY IMMEDIATELY FROM STOCK OF BASED ON CARGO FROM SITE WORK TECHNICAL DETAILS TURNING DIAMETER 505 MM TURNING LENGTH 450 MM CONTROL SIEMENS 840 D SHOP MILL LINING DIAMETER 210 MM ROD DIAMETER 51 MM TURNING DIAMETER OVER BED SLIDE 375 X WAY 213 MM Z-AXIS 450 MM SPINDLE SPEEDS 25-6000 RPM SPINDLE MOTOR 16 / 12 KW TORQUE ON THE S PINDEL 153 / 115 NM RAPID TRAVERSE - LONGITUDINAL/PLAN 60/12/45 M / MIN C-AXIS 0.001 / 360 ° NUMBER OF DRIVEN TOOLS 12 MM ø 30 MM POWER 9 / 6.7 KW SPEED RANGE 4500 / 4000 KW/RPM TOTAL POWER REQUIREMENT 29 MACHINE WEIGHT APPROX. 3.7 TONNES OF SPACE C A. 3.0 X 2.2 X 2.0 M ACCESSORIES MAIN AND SUB SPINDLE YES AND Y AXIS C - AXIS 0.001 ° FOR MAIN U.GEGENSPINDEL Y - AXIS +-40 MM 12 ANGETR. COOLANT SYSTEM CHIP CONVEYOR ADDITIONAL INFORMATION TOOLS WELL PRESERVED MACHINE WITH COUNTER SPINDLE 4 AXIS MACHINE C AXIS AND Y AXE 5 LIVE TOOLS + 10 FIXED TOOLS SPAENEFOERDERER CNC SIEMENS 840 D SHOP MILL
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-245 kg; power [ps]: 4; gross weight [kg]: 245; engine: hatz 1b 20 245 KG; POWER [PS]: 4; GROSS WEIGHT [KG]: 245; ENGINE: HATZ 1B 20
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Precio: 6.800 €
Ubicación: Land-it is a used eberhardt spiral mixer extendable with 2 x bowls (for max 160kg dough) for sale. the spiral kneader is fully functional. the machine has a stainless steel spiral and two stainless steel boilers. operation via membrane keyboard, has two programmable speeds. the machine has a dust cover.
 IT IS A USED EBERHARDT SPIRAL MIXER EXTENDABLE WITH 2 X BOWLS (FOR MAX 160KG DOUGH) FOR SALE. THE SPIRAL KNEADER IS FULLY FUNCTIONAL. THE MACHINE HAS A STAINLESS STEEL SPIRAL AND TWO STAINLESS STEEL BOILERS. OPERATION VIA MEMBRANE KEYBOARD, HAS TWO PROGRAMMABLE SPEEDS. THE MACHINE HAS A DUST COVER.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Ubicación: Land-386 kg; power [ps]: 8; gross weight [kg]: 386; engine: hatz 1b40 386 KG; POWER [PS]: 8; GROSS WEIGHT [KG]: 386; ENGINE: HATZ 1B40
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-lacquering automat schiele vacumat edge coat
type: technikum
start of operation 2011

was used to lacquer the edges of doors with water based lacquer
to use the machine for another purpose the screen must be changed.

components of the machine:
1. basic machine midi-version
    - frame from stainless steel
    - double membrane-lacquer pump
    - pulsation damper 1 1/2 “
    - vacuum compressor 12,5 kw to generate under pressure
    - filter components to clean the exhaust air and to filter the lacquer
- switch cabinet
2. application system edgecoat „vario“ with automatic height  
    adjustment. with the variohead differend heights of the same profiles 
    can be lacquered without retooling or machine stop.
3. edge transport with watercooled cooling plates to protect the transport 
    system.
4. nir dryer incl. control and light barrier water cooled – 
    connection to water necessary

basic machine and lacquering unit are specially coated to reduce set up times.
cooled separator system and cooled edge coating head to avoid hardening of lacquer material.

workpiece sizes:
length 1900 – 2100 mm
width 900 – 1100 mm
height max. 50 mm

power consumption approximately:
vacumat incl. cooling 15 kw
transport  2,2 kw
nir-dryer 14 kw
overall: 31,2 kw

climate condition:
temperature 15 – 40 °c
relative air humidity 20 – 80 %
dew point 8 – 25 °c
operating temperature 8 – 25 °c

compressed air need 1 x ½“ pipe, 6 bar, approx. 400 l/min.

technical details:
infeed speed 15 m/min.
distance between compressor and machine max. 3 m
cable length between switch cabinet and basic machine, vacuum compressor max. 12 m
electric connection 400 v – 3 ph 50 hz
24 v dc
line voltage fluctuation max. + - 6 %
ip 54
noise less then 85 db(a)
fence side right

 LACQUERING AUTOMAT SCHIELE VACUMAT EDGE COAT TYPE: TECHNIKUM START OF OPERATION 2011 WAS USED TO LACQUER THE EDGES OF DOORS WITH WATER BASED LACQUER TO USE THE MACHINE FOR ANOTHER PURPOSE THE SCREEN MUST BE CHANGED. COMPONENTS OF THE MACHINE: 1. BASIC MACHINE MIDI-VERSION - FRAME FROM STAINLESS STEEL - DOUBLE MEMBRANE-LACQUER PUMP - PULSATION DAMPER 1 1/2 “ - VACUUM COMPRESSOR 12,5 KW TO GENERATE UNDER PRESSURE - FILTER COMPONENTS TO CLEAN THE EXHAUST AIR AND TO FILTER THE LACQUER - SWITCH CABINET 2. APPLICATION SYSTEM EDGECOAT „VARIO“ WITH AUTOMATIC HEIGHT ADJUSTMENT. WITH THE VARIOHEAD DIFFEREND HEIGHTS OF THE SAME PROFILES CAN BE LACQUERED WITHOUT RETOOLING OR MACHINE STOP. 3. EDGE TRANSPORT WITH WATERCOOLED COOLING PLATES TO PROTECT THE TRANSPORT SYSTEM. 4. NIR DRYER INCL. CONTROL AND LIGHT BARRIER WATER COOLED – CONNECTION TO WATER NECESSARY BASIC MACHINE AND LACQUERING UNIT ARE SPECIALLY COATED TO REDUCE SET UP TIMES. COOLED SEPARATOR SYSTEM AND COOLED EDGE COATING HEAD TO AVOID HARDENING OF LACQUER MATERIAL. WORKPIECE SIZES: LENGTH 1900 – 2100 MM WIDTH 900 – 1100 MM HEIGHT MAX. 50 MM POWER CONSUMPTION APPROXIMATELY: VACUMAT INCL. COOLING 15 KW TRANSPORT 2,2 KW NIR-DRYER 14 KW OVERALL: 31,2 KW CLIMATE CONDITION: TEMPERATURE 15 – 40 °C RELATIVE AIR HUMIDITY 20 – 80 % DEW POINT 8 – 25 °C OPERATING TEMPERATURE 8 – 25 °C COMPRESSED AIR NEED 1 X ½“ PIPE, 6 BAR, APPROX. 400 L/MIN. TECHNICAL DETAILS: INFEED SPEED 15 M/MIN. DISTANCE BETWEEN COMPRESSOR AND MACHINE MAX. 3 M CABLE LENGTH BETWEEN SWITCH CABINET AND BASIC MACHINE, VACUUM COMPRESSOR MAX. 12 M ELECTRIC CONNECTION 400 V – 3 PH 50 HZ 24 V DC LINE VOLTAGE FLUCTUATION MAX. + - 6 % IP 54 NOISE LESS THEN 85 DB(A) FENCE SIDE RIGHT
Vendedor: FWB-Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-1,5 to net weight; power [ps]: 19; gross weight [kg]: 1595; engine: kubota d 1005 1,5 TO NET WEIGHT; POWER [PS]: 19; GROSS WEIGHT [KG]: 1595; ENGINE: KUBOTA D 1005
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Precio: 7.500 €
Ubicación: Land-it is a used kemper dough divider and knitting machine exacta 3-row for sale.
the machine works exactly the weight.
-range of weight: 35gr. -170gr. (in order to cover the full weight range five different chamber drum are required)
-incl. 2 x chamber drum (for 130gr + smaller weights)
-performance: with 3-row 540 pieces / hour
-hopper size: approx. 40 kg
-dimensions: length: approx. 1350cm, width: 780mm, height: approx. 1650mm
-weight: approx. 750kg
-power consumption: approx. 2.4 kw

on request, a video can be sent to from the test run. IT IS A USED KEMPER DOUGH DIVIDER AND KNITTING MACHINE EXACTA 3-ROW FOR SALE. THE MACHINE WORKS EXACTLY THE WEIGHT. -RANGE OF WEIGHT: 35GR. -170GR. (IN ORDER TO COVER THE FULL WEIGHT RANGE FIVE DIFFERENT CHAMBER DRUM ARE REQUIRED) -INCL. 2 X CHAMBER DRUM (FOR 130GR + SMALLER WEIGHTS) -PERFORMANCE: WITH 3-ROW 540 PIECES / HOUR -HOPPER SIZE: APPROX. 40 KG -DIMENSIONS: LENGTH: APPROX. 1350CM, WIDTH: 780MM, HEIGHT: APPROX. 1650MM -WEIGHT: APPROX. 750KG -POWER CONSUMPTION: APPROX. 2.4 KW ON REQUEST, A VIDEO CAN BE SENT TO FROM THE TEST RUN.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Ubicación: Land-table diameter: 800 mm<br/>table load: 2 t<br/>swivelling range: --> 95 grad<br/>max. torque: 1250 nm<br/>table rotation speed: 2 u/min<br/>working height    from         to: 550 - 1300 vertikal mm<br/>working height    from         to: 650 - 1400 horiz. mm<br/>total power requirement: 2,53 kw<br/>weight of the machine ca.: 930 kg<br/>dimensions of the machine ca.: 1,85 x 1,66 m<br/>electric 400 volt:  <br/>hand control panel:  <br/>hydraulic-device:  <br/>hydraulic positioner for permanent turning right + left, tilting,<br/>raise and lower.<br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> TABLE DIAMETER: 800 MM
TABLE LOAD: 2 T
SWIVELLING RANGE: --> 95 GRAD
MAX. TORQUE: 1250 NM
TABLE ROTATION SPEED: 2 U/MIN
WORKING HEIGHT FROM TO: 550 - 1300 VERTIKAL MM
WORKING HEIGHT FROM TO: 650 - 1400 HORIZ. MM
TOTAL POWER REQUIREMENT: 2,53 KW
WEIGHT OF THE MACHINE CA.: 930 KG
DIMENSIONS OF THE MACHINE CA.: 1,85 X 1,66 M
ELECTRIC 400 VOLT:
HAND CONTROL PANEL:
HYDRAULIC-DEVICE:
HYDRAULIC POSITIONER FOR PERMANENT TURNING RIGHT + LEFT, TILTING,
RAISE AND LOWER.
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-there are two identical machines available, max. closing force: 800kn, distance between the tie bars: 370x370mm, installation height: 250mm, max. opening path: 500mm, max. ejector force: 40kn, operational hours: ca. 45.000h.  THERE ARE TWO IDENTICAL MACHINES AVAILABLE, MAX. CLOSING FORCE: 800KN, DISTANCE BETWEEN THE TIE BARS: 370X370MM, INSTALLATION HEIGHT: 250MM, MAX. OPENING PATH: 500MM, MAX. EJECTOR FORCE: 40KN, OPERATIONAL HOURS: CA. 45.000H.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-spindle diameter: 162 mm<br/>x-travel: 12.000 mm<br/>y-travel: 6.000 mm<br/>z-travel: 1.500 mm<br/>w-axis: 700 mm<br/>v-axis: 3.000 mm<br/>control: 840 d sl  siemens<br/>main spindle::  <br/>turning speed range - main spindle: 5 - 2.800 min/-1<br/>transmission ratio: 2 <br/>power capacity - main spindel: 60 kw<br/>max. torque: 2.868 nm<br/>tool taper: sk 50 big+ <br/>spindle stroke: w: 700 mm<br/>feeds::  <br/>rapid traverse: 15 m/min<br/>feed speeds: 1 - 6.000 mm/min<br/>feed power: max. 25 kn<br/>tool-presetter::  <br/>number of toolpositions: 80 pos.<br/>tool taper: sk 50 big+ <br/>max. tool diameter: 125 / 250 mm<br/>max. tool length: 500 mm<br/>max. tool weight: 30 kg<br/>work table::  <br/>surface area: 1: 6.410 x 3.760 mm<br/>surface area: 2: 5.090 x 2.510 mm<br/>max. table load: 15.000 kg/m²<br/>t-slot - width: 36 mm<br/>t-slot - distance: 250 mm<br/>rotating-table::  <br/>surface area: 3.000 x 2.970 mm<br/>type: dv 60 mm<br/>max. table load: 60.000 kg<br/>t-slots: 14x 28h9 x 200 <br/>rotatable: b: 360 °<br/>total power requirement: 120 kva<br/>weight of the machine ca.: - t<br/>dimensions of the machine ca.: 25 x 17 x 10 m<br/>documents:  <br/>coolantsystem:  <br/>high pressure coolant: 50 bar <br/>through spindle coolant:  <br/>chip conveyor:  <br/>changing system: h/v <br/>pick-up station: autom. 5 pos. <br/>milling-unit: univ. v4 man. <br/>milling-unit: univ. kfu d5/45 <br/>facing-head: nc d´andrea ut5-800s <br/>spindle-extension: 1.200 mm <br/>cnc - boring mill<br/>union chemnitz - pcr 160<br/><br/>- starting-up in 2011<br/>- new spindle in 2016<br/>- ram-spindle<br/>- heavy-duty-machining<br/>- automatic head-changer<br/><br/>milling-heads:<br/>- v4: 2x 360° / 18kw / 1.405nm / 3.000 min/1 / man.<br/>- kfu d5/45: 2x 360°x 1° / 50kw / 1.700nm / 3.000 min/1 / autom.<br/>- ut 5-800s: 250 min/1 / u-axis 250mm<br/>- milling-head one-axis 360° / 15kw / 500nm / 1.500 min/1 / man.<br/>- spindle-extender 1.200mm<br/><br/><br/><br/><br/> SPINDLE DIAMETER: 162 MM
X-TRAVEL: 12.000 MM
Y-TRAVEL: 6.000 MM
Z-TRAVEL: 1.500 MM
W-AXIS: 700 MM
V-AXIS: 3.000 MM
CONTROL: 840 D SL SIEMENS
MAIN SPINDLE::
TURNING SPEED RANGE - MAIN SPINDLE: 5 - 2.800 MIN/-1
TRANSMISSION RATIO: 2
POWER CAPACITY - MAIN SPINDEL: 60 KW
MAX. TORQUE: 2.868 NM
TOOL TAPER: SK 50 BIG+
SPINDLE STROKE: W: 700 MM
FEEDS::
RAPID TRAVERSE: 15 M/MIN
FEED SPEEDS: 1 - 6.000 MM/MIN
FEED POWER: MAX. 25 KN
TOOL-PRESETTER::
NUMBER OF TOOLPOSITIONS: 80 POS.
TOOL TAPER: SK 50 BIG+
MAX. TOOL DIAMETER: 125 / 250 MM
MAX. TOOL LENGTH: 500 MM
MAX. TOOL WEIGHT: 30 KG
WORK TABLE::
SURFACE AREA: 1: 6.410 X 3.760 MM
SURFACE AREA: 2: 5.090 X 2.510 MM
MAX. TABLE LOAD: 15.000 KG/M²
T-SLOT - WIDTH: 36 MM
T-SLOT - DISTANCE: 250 MM
ROTATING-TABLE::
SURFACE AREA: 3.000 X 2.970 MM
TYPE: DV 60 MM
MAX. TABLE LOAD: 60.000 KG
T-SLOTS: 14X 28H9 X 200
ROTATABLE: B: 360 °
TOTAL POWER REQUIREMENT: 120 KVA
WEIGHT OF THE MACHINE CA.: - T
DIMENSIONS OF THE MACHINE CA.: 25 X 17 X 10 M
DOCUMENTS:
COOLANTSYSTEM:
HIGH PRESSURE COOLANT: 50 BAR
THROUGH SPINDLE COOLANT:
CHIP CONVEYOR:
CHANGING SYSTEM: H/V
PICK-UP STATION: AUTOM. 5 POS.
MILLING-UNIT: UNIV. V4 MAN.
MILLING-UNIT: UNIV. KFU D5/45
FACING-HEAD: NC D´ANDREA UT5-800S
SPINDLE-EXTENSION: 1.200 MM
CNC - BORING MILL
UNION CHEMNITZ - PCR 160

- STARTING-UP IN 2011
- NEW SPINDLE IN 2016
- RAM-SPINDLE
- HEAVY-DUTY-MACHINING
- AUTOMATIC HEAD-CHANGER

MILLING-HEADS:
- V4: 2X 360° / 18KW / 1.405NM / 3.000 MIN/1 / MAN.
- KFU D5/45: 2X 360°X 1° / 50KW / 1.700NM / 3.000 MIN/1 / AUTOM.
- UT 5-800S: 250 MIN/1 / U-AXIS 250MM
- MILLING-HEAD ONE-AXIS 360° / 15KW / 500NM / 1.500 MIN/1 / MAN.
- SPINDLE-EXTENDER 1.200MM




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-heating are length: 4950mm, inlet height: 840mm, conveying direction: left to right, heating: ir-radiators/ convection, number of heating zones: 11x 450mm, software: seho maxireflow, workpiece height top/ bottom: 120/ 40mm, nominal power: 53kw, length: 6600mm, machine was scarcely used.  HEATING ARE LENGTH: 4950MM, INLET HEIGHT: 840MM, CONVEYING DIRECTION: LEFT TO RIGHT, HEATING: IR-RADIATORS/ CONVECTION, NUMBER OF HEATING ZONES: 11X 450MM, SOFTWARE: SEHO MAXIREFLOW, WORKPIECE HEIGHT TOP/ BOTTOM: 120/ 40MM, NOMINAL POWER: 53KW, LENGTH: 6600MM, MACHINE WAS SCARCELY USED.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 320 mm<br/>turning length: 600 mm<br/>control: sinumerik 840d <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>cnc control sinumerik 840d<br/>c-axis<br/>driven tools<br/>12-fold revolver<br/>3-jaw chuck <br/>chip conveyor<br/>coolant device<br/><br/>technische daten / technical details:<br/>drehlänge / turning length    600    mm<br/>max. drehdurchmesser / max. turning diameter    320    mm<br/>umlauf-Ø über bett / rotary Ø over bed    505    mm<br/>umlauf-Ø über schlitten / rotary Ø over sledge    365    mm<br/>längsweg / longitudinal travel    635    mm<br/>planweg / cross travel    250    mm<br/>drehzahlbereich / spindle speed range    25-5000    upm /rpm<br/>anzahl revolverwerkzeugplätze / number of places in revolver    12    fach /fold<br/>eilgang z, x / rapid feed z, x    30/24    m/min<br/>antriebsleistung spindel / drive capacity spindle     21    kw<br/>gewicht der maschine ca. / weight ca.    5500    kg<br/>technische daten, zubehör und beschreibung der maschine sind unverbindlich -<br/>technical data, accessories and description of the machine are not binding.<br/><br/><br/><br/><br/><br/> TURNING DIAMETER: 320 MM
TURNING LENGTH: 600 MM
CONTROL: SINUMERIK 840D
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
CNC CONTROL SINUMERIK 840D
C-AXIS
DRIVEN TOOLS
12-FOLD REVOLVER
3-JAW CHUCK
CHIP CONVEYOR
COOLANT DEVICE

TECHNISCHE DATEN / TECHNICAL DETAILS:
DREHLäNGE / TURNING LENGTH 600 MM
MAX. DREHDURCHMESSER / MAX. TURNING DIAMETER 320 MM
UMLAUF-Ø üBER BETT / ROTARY Ø OVER BED 505 MM
UMLAUF-Ø üBER SCHLITTEN / ROTARY Ø OVER SLEDGE 365 MM
LäNGSWEG / LONGITUDINAL TRAVEL 635 MM
PLANWEG / CROSS TRAVEL 250 MM
DREHZAHLBEREICH / SPINDLE SPEED RANGE 25-5000 UPM /RPM
ANZAHL REVOLVERWERKZEUGPLäTZE / NUMBER OF PLACES IN REVOLVER 12 FACH /FOLD
EILGANG Z, X / RAPID FEED Z, X 30/24 M/MIN
ANTRIEBSLEISTUNG SPINDEL / DRIVE CAPACITY SPINDLE 21 KW
GEWICHT DER MASCHINE CA. / WEIGHT CA. 5500 KG
TECHNISCHE DATEN, ZUBEHöR UND BESCHREIBUNG DER MASCHINE SIND UNVERBINDLICH -
TECHNICAL DATA, ACCESSORIES AND DESCRIPTION OF THE MACHINE ARE NOT BINDING.





Vendedor: Gustav Schönberger GmbH
Año de construcción: usado
Precio: 1.500 €
Ubicación: Land-description
brand	scotsman
model	mar 121 spl.kvp
id	0091
status	active
price	1.500 € + vat
location	oradea (ro)

ice flake machine scotsman frimont mar 121 spl.kvp. dimensions (l x w x h): 876 x 661 x 520 mm. production capacity: 850 kg / 24h (salted water), 1000 kg / 24h (freshwater). condenser capacity: 9750 kcal / h (td 10 ÷ 15 ° c). minimum ambient temperature: 5 ° c, maximum ambient temperature: 40 ° c.

exworks. price is negotiable. 

contact
tel.: +40-359/175.575
fax: +40-259/426.248
mobil: +40-743/177.040 ; +40-740/221.698

technical inspection can be organized at least 24 hrs before the due date

we speak english. wir sprechen deutsch. (+40-740/221.698 )
hablamos español. beszélünk magyarul. (+40-743/177.040 )

irrtum, anderungen und zwischenverkauf vorbehalten /
subject to errors, changes and prior sale /
ne rezervam dreptul la greseli, modificari si vanzare prealabila. DESCRIPTION BRAND SCOTSMAN MODEL MAR 121 SPL.KVP ID 0091 STATUS ACTIVE PRICE 1.500 € + VAT LOCATION ORADEA (RO) ICE FLAKE MACHINE SCOTSMAN FRIMONT MAR 121 SPL.KVP. DIMENSIONS (L X W X H): 876 X 661 X 520 MM. PRODUCTION CAPACITY: 850 KG / 24H (SALTED WATER), 1000 KG / 24H (FRESHWATER). CONDENSER CAPACITY: 9750 KCAL / H (TD 10 ÷ 15 ° C). MINIMUM AMBIENT TEMPERATURE: 5 ° C, MAXIMUM AMBIENT TEMPERATURE: 40 ° C. EXWORKS. PRICE IS NEGOTIABLE. CONTACT TEL.: +40-359/175.575 FAX: +40-259/426.248 MOBIL: +40-743/177.040 ; +40-740/221.698 TECHNICAL INSPECTION CAN BE ORGANIZED AT LEAST 24 HRS BEFORE THE DUE DATE WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. (+40-740/221.698 ) HABLAMOS ESPAñOL. BESZéLüNK MAGYARUL. (+40-743/177.040 ) IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Ubicación: Land-x-travel: 800 mm<br/>y-travel: 710 mm<br/>z-travel: 710 mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>cnc control sinumerik 840d<br/>nc-rotary table b-axis<br/>automatic tool changer for 40 tools<br/>pallet changing device, 2 pallets 630x500<br/>coolant through spindle device ikz<br/>chip conveyor<br/>coolant device<br/><br/>technische daten / technical details:<br/>x-weg / x-travel    800    mm<br/>y-weg / y-travel    710    mm<br/>z-weg / z-travel    710    mm<br/>b-achse / b-axis    360 x 0,001°    <br/>spindelaufnahme / spindle taper    sk 50    <br/>drehzahlbereich spindel / spindle speed    10000    upm /rpm<br/>vorschub / infeed    40000    mm/min<br/>eilgang / rapid feed    40    m/min<br/>antriebsleistung 40/100% ed / drive capacity 40/100% ed    37/25    kw<br/>gewicht der maschine ca. / weight ca.    15300    kg<br/>technische daten, zubehör und beschreibung der maschine sind unverbindlich -<br/>technical data, accessories and description of the machine are not binding.<br/><br/><br/><br/><br/><br/><br/> X-TRAVEL: 800 MM
Y-TRAVEL: 710 MM
Z-TRAVEL: 710 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
CNC CONTROL SINUMERIK 840D
NC-ROTARY TABLE B-AXIS
AUTOMATIC TOOL CHANGER FOR 40 TOOLS
PALLET CHANGING DEVICE, 2 PALLETS 630X500
COOLANT THROUGH SPINDLE DEVICE IKZ
CHIP CONVEYOR
COOLANT DEVICE

TECHNISCHE DATEN / TECHNICAL DETAILS:
X-WEG / X-TRAVEL 800 MM
Y-WEG / Y-TRAVEL 710 MM
Z-WEG / Z-TRAVEL 710 MM
B-ACHSE / B-AXIS 360 X 0,001°
SPINDELAUFNAHME / SPINDLE TAPER SK 50
DREHZAHLBEREICH SPINDEL / SPINDLE SPEED 10000 UPM /RPM
VORSCHUB / INFEED 40000 MM/MIN
EILGANG / RAPID FEED 40 M/MIN
ANTRIEBSLEISTUNG 40/100% ED / DRIVE CAPACITY 40/100% ED 37/25 KW
GEWICHT DER MASCHINE CA. / WEIGHT CA. 15300 KG
TECHNISCHE DATEN, ZUBEHöR UND BESCHREIBUNG DER MASCHINE SIND UNVERBINDLICH -
TECHNICAL DATA, ACCESSORIES AND DESCRIPTION OF THE MACHINE ARE NOT BINDING.






Vendedor: Gustav Schönberger GmbH
Año de construcción: usado
Precio: 1.400 €
Ubicación: Land-description
brand	ekobal
model	ekosack 50
id	0083
status	active
price	1.400 € + vat
year of manufacture	2007
location	oradea (ro)

hydraulic baling press ekobal ekopack 50 manufactured in 2007 for waste products. technical specifications: total dimensions (l x l x h): 855 x 680 x 1950 mm. bale dimensions (l x l x h): 600 x 400 x (300-700) mm. maximum bale weight: 40-70 kg. maximum pressure 5 tons ± 5%. surface pressure: 208 kpa. room dimensions (l x w x h): 600 x 400 x 900 mm. pressure compressor capacity: 0.216 m3, type of pressing chamber: interchangeable, stow-away, number of binding slots 2. pressing time: 25 s. power: 1.5 kw, voltage: 3 x 400 v / 50 hz, electrical protection: ip 54, hydraulically driven, machine weight: 310 kg.

exworks. price is negotiable. 


technical inspection can be organized at least 24 hrs before the due date

we speak english. wir sprechen deutsch. 
hablamos español. beszélünk magyarul.

irrtum, anderungen und zwischenverkauf vorbehalten /
subject to errors, changes and prior sale /
ne rezervam dreptul la greseli, modificari si vanzare prealabila. DESCRIPTION BRAND EKOBAL MODEL EKOSACK 50 ID 0083 STATUS ACTIVE PRICE 1.400 € + VAT YEAR OF MANUFACTURE 2007 LOCATION ORADEA (RO) HYDRAULIC BALING PRESS EKOBAL EKOPACK 50 MANUFACTURED IN 2007 FOR WASTE PRODUCTS. TECHNICAL SPECIFICATIONS: TOTAL DIMENSIONS (L X L X H): 855 X 680 X 1950 MM. BALE DIMENSIONS (L X L X H): 600 X 400 X (300-700) MM. MAXIMUM BALE WEIGHT: 40-70 KG. MAXIMUM PRESSURE 5 TONS ± 5%. SURFACE PRESSURE: 208 KPA. ROOM DIMENSIONS (L X W X H): 600 X 400 X 900 MM. PRESSURE COMPRESSOR CAPACITY: 0.216 M3, TYPE OF PRESSING CHAMBER: INTERCHANGEABLE, STOW-AWAY, NUMBER OF BINDING SLOTS 2. PRESSING TIME: 25 S. POWER: 1.5 KW, VOLTAGE: 3 X 400 V / 50 HZ, ELECTRICAL PROTECTION: IP 54, HYDRAULICALLY DRIVEN, MACHINE WEIGHT: 310 KG. EXWORKS. PRICE IS NEGOTIABLE. TECHNICAL INSPECTION CAN BE ORGANIZED AT LEAST 24 HRS BEFORE THE DUE DATE WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. HABLAMOS ESPAñOL. BESZéLüNK MAGYARUL. IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Precio: 3.800 €
Ubicación: Land-tenoning spindle: 1 st.<br/>number of milling agregates: 4 st.<br/>spindle diameter: 50/40 mm<br/>dimensions (l/w/h): 3500x2400x2400 mm<br/>weight: 3750 kg<br/>! machine on order for sale!<br/><br/>! can still be visited in action!<br/><br/>gubisch - centromat cw 1<br/><br/>for window and door production with 50 mm d spindles in longitudinal profiling.<br/><br/>with the following processing stations and possibilities:<br/><br/>1.0 automatically cutting the cross-cut saw from above<br/><br/>- engine power, including engine brake 3.0 kw<br/>- spindle speed 2800 rpm.<br/>- circle diameter 350 mm<br/>- spindle diameter 30 mm d<br/>- clamping flange, 1 driver 6 mm d<br/>  tc 42 mm 120 mm dia.<br/>- vertical stroke pneumatic 100 mm<br/>- horizontal stroke pneumatic 160 mm<br/>  against 2 manual 6-fold revolver stops<br/>- shaving dust hood with extraction nozzle 105 mm d<br/><br/>2.0 slot unit<br/><br/>- engine power, including engine brake 9.2 kw<br/>- spindle speed 3800 rpm.<br/>- circle diameter 320 mm max.<br/>- spindle diameter 50 mm<br/>- spindle usage length 300 mm<br/>- vertical stroke pneumatically fixed 2 x 100 mm<br/>- suitable for 3 tool sets a 100 mm<br/>- zero height 10 mm<br/>- shaving dust hood with extraction nozzle-d 160 mm<br/><br/>3.0 slot table<br/><br/>- table height above ground 920 mm<br/>- feed for 4 speeds freely adjustable:<br/>1st milling, oblique window u. tippgeschw. 7 m / min.<br/>in the tableau.<br/>2. sawing speed 7 m / min.<br/>   3. transfer speed 10 m / min. = on the device.<br/>- 4. return speed / without machining. 25 m / min.<br/>- engine power including engine brake 0.37 kw<br/>- 1 clamping cylinder with 2 additional. pressure shoes<br/>- workpiece clamping pneumatic<br/><br/>3.1 counter timber<br/>- counter holchanger with 2 positions, automatically changeable as well<br/>  manual rotation of 180 °<br/><br/>3.2 length stop<br/>- stop system with 3 scales for<br/>a) frame outside<br/>b) wing upright upright<br/>c) wings outside across<br/>- manual adjustment<br/>- length 2300 mm<br/>- swiveling for diagonal windows +/- 60 degrees<br/><br/>3.3 angle transfer<br/>       automatically via vertically indexed feed roller in the milling feed<br/><br/>4.0 milling machine<br/>       for longitudinal profiling and overturning of windows / doors with the <br/>following<br/>aggregates:<br/><br/>4.1 synchronized milling unit with automatic dipping<br/>- synchronism<br/>- automatic dipping can be used for refolding<br/>- engine power including engine brake 7.5 kw<br/>- spindle speed 6000 rpm.<br/>- circle diameter 240 mm max.<br/>- side stops adjustable for zero-d 140 mm max.<br/>  tools 112 mm min.<br/>- zero height 10 mm<br/>- spindle diameter 50 mm d<br/>- spindle useful length 100 mm<br/>- horizontal stroke pneumatic 80 mm<br/>- shaving dust hood with extraction nozzle d 120 mm<br/><br/>4.2 profile milling unit<br/><br/>- reverse<br/>- engine power including engine brake 9.2 kw<br/>- spindle speed 6000 rpm.<br/>- circle diameter 240 mm max.<br/>- side stops adjustable for zero-d 140 mm max.<br/>  tools 112 mm min.<br/>- zero height 10 mm<br/>- spindle diameter 50 mm d<br/>- spindle usage length 300 mm<br/>- vertical stroke pneumatically fixed 1 x 100 mm<br/>  suitable for 3 tool sets a 100 mm 2 x 100 mm<br/>- shaving dust hood with extraction nozzle-d 140 mm<br/><br/>4.3 fitting device<br/><br/>- reverse<br/>- engine power including engine brake 4.0 kw<br/>- spindle speed 6,000 rpm.<br/>- circle diameter 200 mm fix<br/>- zero height 10 mm<br/>- spindle diameter 50 mm d<br/>- spindle useful length 100 mm<br/>- horizontal stroke 80 mm<br/>- chip extraction with extraction nozzle-d 120 mm<br/><br/>4.4 glass bead sawing unit<br/>- reverse<br/>- engine power including engine brake 3.0 kw<br/>- spindle speed 3,000 rpm.<br/>- spindle diameter 30 mm<br/>- spindle useful length 15 mm<br/>- circle diameter 200 mm<br/>- clamping flange, 1 driver 6 mm d<br/>  tc 42 mm 85 mm d<br/>- vertical stroke pneumatic 100 mm<br/>- glazing bead removal<br/>  incl. anti-kickback device on the unit<br/>- shaving dust hood with extraction nozzle-d 80 mm<br/>- including electr. control<br/><br/>4.5 feed<br/>- motor power 0.75 kw<br/>- feed rate 6 m / min.<br/>- roller distance<br/>  in the area of ??processing units 110 mm<br/>  in the area of ??the feeder 200 mm<br/>- feed rollers individually adjustable diagonally to the stop<br/><br/>4.6 vertical right stops<br/>- stop 1 + 2 for 1 mm chip removal<br/>  adjusted<br/>- adjustable for zero diameter 112 - 140 mm<br/><br/>5.0 workpiece return device<br/>- the finished workpieces come over a sloping roller conveyor<br/> back to the operator.<br/><br/>6.0 central control<br/><br/>clear central control panel with standard control and semi-automatic<br/>in the slot or profile milling unit<br/>(3 programs for frame production iv)<br/>- single and combined operation with automatic angle transfer function<br/>- with umfälzbetriebsschaltung including 4-step control<br/>- simplest, easy to understand, logically structured handling of the controller<br/><br/>8.0 technical connection data<br/>- compressed air connection 3/8 8 bar<br/>- compressed air consumption approx<br/>- extraction air volume 135 m3 / min.<br/>- operating voltage 380 volts, 50 hz.<br/>- connected total 36.0 kw<br/>- extraction air velocity 32 m / sec.<br/>- electrical equipment according to vde 0113 / ip 54<br/>- loading weight approx. 3750 kg<br/><br/>(technical data according to manufacturer - without guarantee!)<br/><br/><br/><br/><br/> TENONING SPINDLE: 1 ST.
NUMBER OF MILLING AGREGATES: 4 ST.
SPINDLE DIAMETER: 50/40 MM
DIMENSIONS (L/W/H): 3500X2400X2400 MM
WEIGHT: 3750 KG
! MACHINE ON ORDER FOR SALE!

! CAN STILL BE VISITED IN ACTION!

GUBISCH - CENTROMAT CW 1

FOR WINDOW AND DOOR PRODUCTION WITH 50 MM D SPINDLES IN LONGITUDINAL PROFILING.

WITH THE FOLLOWING PROCESSING STATIONS AND POSSIBILITIES:

1.0 AUTOMATICALLY CUTTING THE CROSS-CUT SAW FROM ABOVE

- ENGINE POWER, INCLUDING ENGINE BRAKE 3.0 KW
- SPINDLE SPEED 2800 RPM.
- CIRCLE DIAMETER 350 MM
- SPINDLE DIAMETER 30 MM D
- CLAMPING FLANGE, 1 DRIVER 6 MM D
TC 42 MM 120 MM DIA.
- VERTICAL STROKE PNEUMATIC 100 MM
- HORIZONTAL STROKE PNEUMATIC 160 MM
AGAINST 2 MANUAL 6-FOLD REVOLVER STOPS
- SHAVING DUST HOOD WITH EXTRACTION NOZZLE 105 MM D

2.0 SLOT UNIT

- ENGINE POWER, INCLUDING ENGINE BRAKE 9.2 KW
- SPINDLE SPEED 3800 RPM.
- CIRCLE DIAMETER 320 MM MAX.
- SPINDLE DIAMETER 50 MM
- SPINDLE USAGE LENGTH 300 MM
- VERTICAL STROKE PNEUMATICALLY FIXED 2 X 100 MM
- SUITABLE FOR 3 TOOL SETS A 100 MM
- ZERO HEIGHT 10 MM
- SHAVING DUST HOOD WITH EXTRACTION NOZZLE-D 160 MM

3.0 SLOT TABLE

- TABLE HEIGHT ABOVE GROUND 920 MM
- FEED FOR 4 SPEEDS FREELY ADJUSTABLE:
1ST MILLING, OBLIQUE WINDOW U. TIPPGESCHW. 7 M / MIN.
IN THE TABLEAU.
2. SAWING SPEED 7 M / MIN.
3. TRANSFER SPEED 10 M / MIN. = ON THE DEVICE.
- 4. RETURN SPEED / WITHOUT MACHINING. 25 M / MIN.
- ENGINE POWER INCLUDING ENGINE BRAKE 0.37 KW
- 1 CLAMPING CYLINDER WITH 2 ADDITIONAL. PRESSURE SHOES
- WORKPIECE CLAMPING PNEUMATIC

3.1 COUNTER TIMBER
- COUNTER HOLCHANGER WITH 2 POSITIONS, AUTOMATICALLY CHANGEABLE AS WELL
MANUAL ROTATION OF 180 °

3.2 LENGTH STOP
- STOP SYSTEM WITH 3 SCALES FOR
A) FRAME OUTSIDE
B) WING UPRIGHT UPRIGHT
C) WINGS OUTSIDE ACROSS
- MANUAL ADJUSTMENT
- LENGTH 2300 MM
- SWIVELING FOR DIAGONAL WINDOWS +/- 60 DEGREES

3.3 ANGLE TRANSFER
AUTOMATICALLY VIA VERTICALLY INDEXED FEED ROLLER IN THE MILLING FEED

4.0 MILLING MACHINE
FOR LONGITUDINAL PROFILING AND OVERTURNING OF WINDOWS / DOORS WITH THE
FOLLOWING
AGGREGATES:

4.1 SYNCHRONIZED MILLING UNIT WITH AUTOMATIC DIPPING
- SYNCHRONISM
- AUTOMATIC DIPPING CAN BE USED FOR REFOLDING
- ENGINE POWER INCLUDING ENGINE BRAKE 7.5 KW
- SPINDLE SPEED 6000 RPM.
- CIRCLE DIAMETER 240 MM MAX.
- SIDE STOPS ADJUSTABLE FOR ZERO-D 140 MM MAX.
TOOLS 112 MM MIN.
- ZERO HEIGHT 10 MM
- SPINDLE DIAMETER 50 MM D
- SPINDLE USEFUL LENGTH 100 MM
- HORIZONTAL STROKE PNEUMATIC 80 MM
- SHAVING DUST HOOD WITH EXTRACTION NOZZLE D 120 MM

4.2 PROFILE MILLING UNIT

- REVERSE
- ENGINE POWER INCLUDING ENGINE BRAKE 9.2 KW
- SPINDLE SPEED 6000 RPM.
- CIRCLE DIAMETER 240 MM MAX.
- SIDE STOPS ADJUSTABLE FOR ZERO-D 140 MM MAX.
TOOLS 112 MM MIN.
- ZERO HEIGHT 10 MM
- SPINDLE DIAMETER 50 MM D
- SPINDLE USAGE LENGTH 300 MM
- VERTICAL STROKE PNEUMATICALLY FIXED 1 X 100 MM
SUITABLE FOR 3 TOOL SETS A 100 MM 2 X 100 MM
- SHAVING DUST HOOD WITH EXTRACTION NOZZLE-D 140 MM

4.3 FITTING DEVICE

- REVERSE
- ENGINE POWER INCLUDING ENGINE BRAKE 4.0 KW
- SPINDLE SPEED 6,000 RPM.
- CIRCLE DIAMETER 200 MM FIX
- ZERO HEIGHT 10 MM
- SPINDLE DIAMETER 50 MM D
- SPINDLE USEFUL LENGTH 100 MM
- HORIZONTAL STROKE 80 MM
- CHIP EXTRACTION WITH EXTRACTION NOZZLE-D 120 MM

4.4 GLASS BEAD SAWING UNIT
- REVERSE
- ENGINE POWER INCLUDING ENGINE BRAKE 3.0 KW
- SPINDLE SPEED 3,000 RPM.
- SPINDLE DIAMETER 30 MM
- SPINDLE USEFUL LENGTH 15 MM
- CIRCLE DIAMETER 200 MM
- CLAMPING FLANGE, 1 DRIVER 6 MM D
TC 42 MM 85 MM D
- VERTICAL STROKE PNEUMATIC 100 MM
- GLAZING BEAD REMOVAL
INCL. ANTI-KICKBACK DEVICE ON THE UNIT
- SHAVING DUST HOOD WITH EXTRACTION NOZZLE-D 80 MM
- INCLUDING ELECTR. CONTROL

4.5 FEED
- MOTOR POWER 0.75 KW
- FEED RATE 6 M / MIN.
- ROLLER DISTANCE
IN THE AREA OF ??PROCESSING UNITS 110 MM
IN THE AREA OF ??THE FEEDER 200 MM
- FEED ROLLERS INDIVIDUALLY ADJUSTABLE DIAGONALLY TO THE STOP

4.6 VERTICAL RIGHT STOPS
- STOP 1 + 2 FOR 1 MM CHIP REMOVAL
ADJUSTED
- ADJUSTABLE FOR ZERO DIAMETER 112 - 140 MM

5.0 WORKPIECE RETURN DEVICE
- THE FINISHED WORKPIECES COME OVER A SLOPING ROLLER CONVEYOR
BACK TO THE OPERATOR.

6.0 CENTRAL CONTROL

CLEAR CENTRAL CONTROL PANEL WITH STANDARD CONTROL AND SEMI-AUTOMATIC
IN THE SLOT OR PROFILE MILLING UNIT
(3 PROGRAMS FOR FRAME PRODUCTION IV)
- SINGLE AND COMBINED OPERATION WITH AUTOMATIC ANGLE TRANSFER FUNCTION
- WITH UMFäLZBETRIEBSSCHALTUNG INCLUDING 4-STEP CONTROL
- SIMPLEST, EASY TO UNDERSTAND, LOGICALLY STRUCTURED HANDLING OF THE CONTROLLER

8.0 TECHNICAL CONNECTION DATA
- COMPRESSED AIR CONNECTION 3/8 8 BAR
- COMPRESSED AIR CONSUMPTION APPROX
- EXTRACTION AIR VOLUME 135 M3 / MIN.
- OPERATING VOLTAGE 380 VOLTS, 50 HZ.
- CONNECTED TOTAL 36.0 KW
- EXTRACTION AIR VELOCITY 32 M / SEC.
- ELECTRICAL EQUIPMENT ACCORDING TO VDE 0113 / IP 54
- LOADING WEIGHT APPROX. 3750 KG

(TECHNICAL DATA ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Precio: 1.400 €
Ubicación: Land-
description
brand	lux
model	l3-vk
id	0081
status	active
price	1.400 € + vat
year of manufacture	2007
location	oradea (ro)

single-chamber vertical packing press with replaceable chamber lux l3-vk made in 2007. the press is used for pressing waste materials such as paper, cardboard, foil, fabrics, plastics, etc. technical parameters of the press: dimensions total (w x h x d) 833 x 637 x 2005 mm, chamber size (w x d x h) 600 x 400 x 920 mm, package size (w x h x d) 600 x 400 x 500 mm, bale weight 25-60 kg (depending on material), pressing force 3 t, pressing time 25 s, stroke 600 mm. power consumption 1.5 kw. voltage 230 v. weight of the press 230 kg. tilting the bale by hand.

manufacturers' website: abcs://abc.lux-ptz.com/en/products/baling-presses-3-12-t-of-pressure/l3-vk-2/

exworks. price is negotiable. 

contact
tel.: +40-359/175.575
fax: +40-259/426.248
mobil: +40-743/177.040 ; +40-740/221.698

technical inspection can be organized at least 24 hrs before the due date

we speak english. wir sprechen deutsch. (+40-740/221.698 )
hablamos español. beszélünk magyarul. (+40-743/177.040 )

irrtum, anderungen und zwischenverkauf vorbehalten /
subject to errors, changes and prior sale /
ne rezervam dreptul la greseli, modificari si vanzare prealabila.

 DESCRIPTION BRAND LUX MODEL L3-VK ID 0081 STATUS ACTIVE PRICE 1.400 € + VAT YEAR OF MANUFACTURE 2007 LOCATION ORADEA (RO) SINGLE-CHAMBER VERTICAL PACKING PRESS WITH REPLACEABLE CHAMBER LUX L3-VK MADE IN 2007. THE PRESS IS USED FOR PRESSING WASTE MATERIALS SUCH AS PAPER, CARDBOARD, FOIL, FABRICS, PLASTICS, ETC. TECHNICAL PARAMETERS OF THE PRESS: DIMENSIONS TOTAL (W X H X D) 833 X 637 X 2005 MM, CHAMBER SIZE (W X D X H) 600 X 400 X 920 MM, PACKAGE SIZE (W X H X D) 600 X 400 X 500 MM, BALE WEIGHT 25-60 KG (DEPENDING ON MATERIAL), PRESSING FORCE 3 T, PRESSING TIME 25 S, STROKE 600 MM. POWER CONSUMPTION 1.5 KW. VOLTAGE 230 V. WEIGHT OF THE PRESS 230 KG. TILTING THE BALE BY HAND. MANUFACTURERS' WEBSITE: ABCS://ABC.LUX-PTZ.COM/EN/PRODUCTS/BALING-PRESSES-3-12-T-OF-PRESSURE/L3-VK-2/ EXWORKS. PRICE IS NEGOTIABLE. CONTACT TEL.: +40-359/175.575 FAX: +40-259/426.248 MOBIL: +40-743/177.040 ; +40-740/221.698 TECHNICAL INSPECTION CAN BE ORGANIZED AT LEAST 24 HRS BEFORE THE DUE DATE WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. (+40-740/221.698 ) HABLAMOS ESPAñOL. BESZéLüNK MAGYARUL. (+40-743/177.040 ) IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA.
Vendedor: Kuhn & Partner Romania SRL
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 600 x 600 x 1400 mm<br/>description: without operating panel, see photos for details WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 600 X 1400 MM
DESCRIPTION: WITHOUT OPERATING PANEL, SEE PHOTOS FOR DETAILS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-nilpeter fa 3300, 2003
ref.nr: 2589 manufacturer nilpeter model fa 3300 year built: 2003 speed: 175 m / min. 
availability: april 2019 condition: good technical spezification: â?¢ 8 printing units
â?¢ uv drying system
â?¢ varnish unit: 1xuv drying
â?¢ rotary cut
â?¢ rotocontrol 3000 register system
â?¢ corona: vetaphone
â?¢ mounting equipment: yes, supplied with machine, de-/ relamination waste suction device, web inspection equipment, water chillers
â?¢ printing technology: uv flexo maximum
â?¢ printing width: 330 mm
â?¢ maximum material width: 340 mm
â?¢ maximum repeats range: 381 mm
â?¢ toth system: 3.175 mm (1/8 ")
â?¢ photo polymer/tape thickness: 1.70 mm / 0.38 mm
â?¢ maximum mechanical speed: 175 m / min.
â?¢ maximum unwind diameter: 750 mm
â?¢ maximum rewind diameter: 700 mm
â?¢ unwind/rewind shaft diameter: 76 mm
â?¢ material thickness: 100-220 microns
printing cylinders:
z: 64:203.2 - 65:206.4 - 67:212.7 - 68:215.9 - 75:238.1 - 80:254 - 84:266.7 - 87:279.4 - 89:282.6 - 90:285.75 - 92:146.05
- 94:298.5 - 95:301.6 - 96:304.8 - 98:311.2 - 100:317.5 - 101:320.7 - 102:323.9 - 104:330.2 - 106:336.6 - 108:342.9 - 109:346.1 - 114:362 - 115:365.1 - 116:368.3 - 120:381
magnetic cylinders:
z: 64:203.2 -  65:206.4   -  68:215.9  -  72:228.6  -  75:238.1 -  80:254 - 84:266.7 - 87:279.4 - 90:285.75 - 96:304.8 - 98:311.2 - 100:317.5 - 102:323.9 - 104:330.2 - 106:336.6 - 108:342.9 - 112:355.6- 114:362 - 116:368.3 - 120:381
anilox rolls
â?¢ 2.30 cmâ² / m â² - 340 l / cm - 2 pieces
â?¢ 2.50 cmâ² / m â² - 340 l / cm - 4 pieces
â?¢ 2.80 cm 2 / m â² - 340 l / cm - 1 piece
â?¢ 3.10 cmâ² / m â² - 340 l / cm - 1 piece
â?¢ 3.50 cmâ² / m â² - 340 l / cm - 1 piece
â?¢ 3.60 cmâ² / m â² - 340 l / cm - 3 pieces
â?¢ 4.20 cmâ² / m â² - 340 l / cm - 1 piece
â?¢ 4.50 cmâ² / m â² - 340 l / cm - 2 pieces
â?¢ 4.56 cmâ² / m â² - 340 l / cm - 1 piece
â?¢ 5.10 cmâ² / m â² - 340 l / cm - 3 pieces
â?¢ 5.60 cm 2 / m â² - 340 l / cm - 1 piece
â?¢ 6.30 cmâ² / m â² - 180 l / cm - 2 pieces
â?¢ 6.80 cm 2 / m â² - 160 l / cm - 2 pieces
â?¢ 7.00 cmâ² / m â² - 180 l / cm - 1 piece
â?¢ 7.30 cmâ² / m â² - 180 l / cm - 1 piece
â?¢ 7.70 cmâ² / m â² - 160 l / cm - 1 piece
â?¢ 8.40 cmâ² / m â² - 140 l / cm - 2 pieces
â?¢ 9.00 cmâ² / m â² - 160 l / cm - 1 piece
â?¢ 9.50 cmâ² / m â² - 160 l / cm - 1 piece
â?¢ 10.10 cmâ² / m â² - 140 l / cm - 1 piece
â?¢ 11.00 cmâ² / m â² - 140 l / cm - 1 piece
â?¢ 12.00 cmâ² / m â² - 140 l / cm - 1 piece
 NILPETER FA 3300, 2003 REF.NR: 2589 MANUFACTURER NILPETER MODEL FA 3300 YEAR BUILT: 2003 SPEED: 175 M / MIN. AVAILABILITY: APRIL 2019 CONDITION: GOOD TECHNICAL SPEZIFICATION: &ACIRC;?&CENT; 8 PRINTING UNITS &ACIRC;?&CENT; UV DRYING SYSTEM &ACIRC;?&CENT; VARNISH UNIT: 1XUV DRYING &ACIRC;?&CENT; ROTARY CUT &ACIRC;?&CENT; ROTOCONTROL 3000 REGISTER SYSTEM &ACIRC;?&CENT; CORONA: VETAPHONE &ACIRC;?&CENT; MOUNTING EQUIPMENT: YES, SUPPLIED WITH MACHINE, DE-/ RELAMINATION WASTE SUCTION DEVICE, WEB INSPECTION EQUIPMENT, WATER CHILLERS &ACIRC;?&CENT; PRINTING TECHNOLOGY: UV FLEXO MAXIMUM &ACIRC;?&CENT; PRINTING WIDTH: 330 MM &ACIRC;?&CENT; MAXIMUM MATERIAL WIDTH: 340 MM &ACIRC;?&CENT; MAXIMUM REPEATS RANGE: 381 MM &ACIRC;?&CENT; TOTH SYSTEM: 3.175 MM (1/8 ") &ACIRC;?&CENT; PHOTO POLYMER/TAPE THICKNESS: 1.70 MM / 0.38 MM &ACIRC;?&CENT; MAXIMUM MECHANICAL SPEED: 175 M / MIN. &ACIRC;?&CENT; MAXIMUM UNWIND DIAMETER: 750 MM &ACIRC;?&CENT; MAXIMUM REWIND DIAMETER: 700 MM &ACIRC;?&CENT; UNWIND/REWIND SHAFT DIAMETER: 76 MM &ACIRC;?&CENT; MATERIAL THICKNESS: 100-220 MICRONS PRINTING CYLINDERS: Z: 64:203.2 - 65:206.4 - 67:212.7 - 68:215.9 - 75:238.1 - 80:254 - 84:266.7 - 87:279.4 - 89:282.6 - 90:285.75 - 92:146.05 - 94:298.5 - 95:301.6 - 96:304.8 - 98:311.2 - 100:317.5 - 101:320.7 - 102:323.9 - 104:330.2 - 106:336.6 - 108:342.9 - 109:346.1 - 114:362 - 115:365.1 - 116:368.3 - 120:381 MAGNETIC CYLINDERS: Z: 64:203.2 - 65:206.4 - 68:215.9 - 72:228.6 - 75:238.1 - 80:254 - 84:266.7 - 87:279.4 - 90:285.75 - 96:304.8 - 98:311.2 - 100:317.5 - 102:323.9 - 104:330.2 - 106:336.6 - 108:342.9 - 112:355.6- 114:362 - 116:368.3 - 120:381 ANILOX ROLLS &ACIRC;?&CENT; 2.30 CM&ACIRC;&SUP2; / M &ACIRC;&SUP2; - 340 L / CM - 2 PIECES &ACIRC;?&CENT; 2.50 CM&ACIRC;&SUP2; / M &ACIRC;&SUP2; - 340 L / CM - 4 PIECES &ACIRC;?&CENT; 2.80 CM 2 / M &ACIRC;&SUP2; - 340 L / CM - 1 PIECE &ACIRC;?&CENT; 3.10 CM&ACIRC;&SUP2; / M &ACIRC;&SUP2; - 340 L / CM - 1 PIECE &ACIRC;?&CENT; 3.50 CM&ACIRC;&SUP2; / M &ACIRC;&SUP2; - 340 L / CM - 1 PIECE &ACIRC;?&CENT; 3.60 CM&ACIRC;&SUP2; / M &ACIRC;&SUP2; - 340 L / CM - 3 PIECES &ACIRC;?&CENT; 4.20 CM&ACIRC;&SUP2; / M &ACIRC;&SUP2; - 340 L / CM - 1 PIECE &ACIRC;?&CENT; 4.50 CM&ACIRC;&SUP2; / M &ACIRC;&SUP2; - 340 L / CM - 2 PIECES &ACIRC;?&CENT; 4.56 CM&ACIRC;&SUP2; / M &ACIRC;&SUP2; - 340 L / CM - 1 PIECE &ACIRC;?&CENT; 5.10 CM&ACIRC;&SUP2; / M &ACIRC;&SUP2; - 340 L / CM - 3 PIECES &ACIRC;?&CENT; 5.60 CM 2 / M &ACIRC;&SUP2; - 340 L / CM - 1 PIECE &ACIRC;?&CENT; 6.30 CM&ACIRC;&SUP2; / M &ACIRC;&SUP2; - 180 L / CM - 2 PIECES &ACIRC;?&CENT; 6.80 CM 2 / M &ACIRC;&SUP2; - 160 L / CM - 2 PIECES &ACIRC;?&CENT; 7.00 CM&ACIRC;&SUP2; / M &ACIRC;&SUP2; - 180 L / CM - 1 PIECE &ACIRC;?&CENT; 7.30 CM&ACIRC;&SUP2; / M &ACIRC;&SUP2; - 180 L / CM - 1 PIECE &ACIRC;?&CENT; 7.70 CM&ACIRC;&SUP2; / M &ACIRC;&SUP2; - 160 L / CM - 1 PIECE &ACIRC;?&CENT; 8.40 CM&ACIRC;&SUP2; / M &ACIRC;&SUP2; - 140 L / CM - 2 PIECES &ACIRC;?&CENT; 9.00 CM&ACIRC;&SUP2; / M &ACIRC;&SUP2; - 160 L / CM - 1 PIECE &ACIRC;?&CENT; 9.50 CM&ACIRC;&SUP2; / M &ACIRC;&SUP2; - 160 L / CM - 1 PIECE &ACIRC;?&CENT; 10.10 CM&ACIRC;&SUP2; / M &ACIRC;&SUP2; - 140 L / CM - 1 PIECE &ACIRC;?&CENT; 11.00 CM&ACIRC;&SUP2; / M &ACIRC;&SUP2; - 140 L / CM - 1 PIECE &ACIRC;?&CENT; 12.00 CM&ACIRC;&SUP2; / M &ACIRC;&SUP2; - 140 L / CM - 1 PIECE
Vendedor: PP Lion Trade e.K.
Año de construcción: usado
Precio: used machinery auction RESALE 18.000 €
Ubicación: Land-weight approx.: 2100 kg<br/>dimensions (l x w x h) approx.: 2043 x 1138 x 1760 mm<br/>description: -serial number 2602044772codl<br> -machine number 009/56995<br> -control: ge fanuc series 16i-tb<br> -operating hours total = 67037 h<br> -work = 13817 h<br> -max rotating diameter 12.7 mm<br> -max spindle speed = 12000 rpm<br> -longitudinal stroke z1 = 120 mm<br> -feed / rapid traverse = 40 m / min<br> -spindle position 0.1 degrees<br> -compression collet type schaublin 76-580<br> -cross slide<br> -radial stroke c1 = 30 m, transverse stroke y1 = 195mm<br> -feed / rapid traverse x1 = 40 m / min<br> -tool holder max number of tools 5/4 (fixed / driven)<br> -dimensions tool shank 10 x 10 mm<br> -slide x2, transverse stroke x2 = 180 mm<br> -feed / rapid traverse = 40 m / min<br> -counterspindle, longitudinal stroke z2 = 180 mm<br> -feed / rapid traverse z2 = 40 m / min<br> -incl. chip conveyor with worm drive<br> -coolant content max. 140 l<br> <br> -weight bar loader 650 kg<br> -dimensions bar loader 4000 x 500 x 150 mm<br> WEIGHT APPROX.: 2100 KG
DIMENSIONS (L X W X H) APPROX.: 2043 X 1138 X 1760 MM
DESCRIPTION: -SERIAL NUMBER 2602044772CODL
-MACHINE NUMBER 009/56995
-CONTROL: GE FANUC SERIES 16I-TB
-OPERATING HOURS TOTAL = 67037 H
-WORK = 13817 H
-MAX ROTATING DIAMETER 12.7 MM
-MAX SPINDLE SPEED = 12000 RPM
-LONGITUDINAL STROKE Z1 = 120 MM
-FEED / RAPID TRAVERSE = 40 M / MIN
-SPINDLE POSITION 0.1 DEGREES
-COMPRESSION COLLET TYPE SCHAUBLIN 76-580
-CROSS SLIDE
-RADIAL STROKE C1 = 30 M, TRANSVERSE STROKE Y1 = 195MM
-FEED / RAPID TRAVERSE X1 = 40 M / MIN
-TOOL HOLDER MAX NUMBER OF TOOLS 5/4 (FIXED / DRIVEN)
-DIMENSIONS TOOL SHANK 10 X 10 MM
-SLIDE X2, TRANSVERSE STROKE X2 = 180 MM
-FEED / RAPID TRAVERSE = 40 M / MIN
-COUNTERSPINDLE, LONGITUDINAL STROKE Z2 = 180 MM
-FEED / RAPID TRAVERSE Z2 = 40 M / MIN
-INCL. CHIP CONVEYOR WITH WORM DRIVE
-COOLANT CONTENT MAX. 140 L

-WEIGHT BAR LOADER 650 KG
-DIMENSIONS BAR LOADER 4000 X 500 X 150 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-machine specification

year: 2003 
control unit: mc4 

injection unit: .../1000
screw diameter: 55 mm 
injection pressure: 1904 bar 
injection volume: 523 ccm 
shot capacity: 476 g 

clamping unit: 200/...
clamping force: 200 t 
platen size: 915 x 910 mm 
distance between tie bars: 560 x 560 mm 
mould height: 350 mm 
opening storke: 700 mm 
max.daylight: 1050 mm 
ejector stroke: 200 mm 
drive power of the hydraulic pump: 37 kw 
cylinder heating power: 18 kw 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 5,35 x 1,90 x 2,25 m 
weight: 10550 kg 

equipment:
- 1 x pneumatic valve
- 1 x core pulls
- quality package
- increased oil cooler
- mecanic interface euromap 18 MACHINE SPECIFICATION YEAR: 2003 CONTROL UNIT: MC4 INJECTION UNIT: .../1000 SCREW DIAMETER: 55 MM INJECTION PRESSURE: 1904 BAR INJECTION VOLUME: 523 CCM SHOT CAPACITY: 476 G CLAMPING UNIT: 200/... CLAMPING FORCE: 200 T PLATEN SIZE: 915 X 910 MM DISTANCE BETWEEN TIE BARS: 560 X 560 MM MOULD HEIGHT: 350 MM OPENING STORKE: 700 MM MAX.DAYLIGHT: 1050 MM EJECTOR STROKE: 200 MM DRIVE POWER OF THE HYDRAULIC PUMP: 37 KW CYLINDER HEATING POWER: 18 KW GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 5,35 X 1,90 X 2,25 M WEIGHT: 10550 KG EQUIPMENT: - 1 X PNEUMATIC VALVE - 1 X CORE PULLS - QUALITY PACKAGE - INCREASED OIL COOLER - MECANIC INTERFACE EUROMAP 18
Vendedor: EuropNet GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 700 €
Ubicación: Land-weight approx.: 600 kg<br/>dimensions (l x w x h) approx.: 2500 x 1700 x 1600 mm<br/>feed: 7,5 m/min<br/>edge thickness: 3 mm<br/>workpiece thickness: max. 50 mm<br/>total power approx: 6,3 kw<br/>description: <h3>hebrock akv 100 vs edgebander <,/ h3>, total connected load 6.3 kw<br> equipped with a single edging plate and edge feed with scissors<br> flush trimming unit for upper and lower edge overhang<br> incl. shelf with div. edge materials<br> edge thickness max mm 3<br> flush milling<br> plate length min mm 175<br> plate thickness max mm 50<br> chamfer angle ° 45<br> feed rate max m / min 7.5<br> high-frequency motors<br> kappmesser<br> workpiece feed rollers<br> ce mark<br> dimensions 2500 x 1700 x 1600 mm<br> weight 600 kg<br></h3> WEIGHT APPROX.: 600 KG
DIMENSIONS (L X W X H) APPROX.: 2500 X 1700 X 1600 MM
FEED: 7,5 M/MIN
EDGE THICKNESS: 3 MM
WORKPIECE THICKNESS: MAX. 50 MM
TOTAL POWER APPROX: 6,3 KW
DESCRIPTION:

HEBROCK AKV 100 VS EDGEBANDER <,/ H3>, TOTAL CONNECTED LOAD 6.3 KW
EQUIPPED WITH A SINGLE EDGING PLATE AND EDGE FEED WITH SCISSORS
FLUSH TRIMMING UNIT FOR UPPER AND LOWER EDGE OVERHANG
INCL. SHELF WITH DIV. EDGE MATERIALS
EDGE THICKNESS MAX MM 3
FLUSH MILLING
PLATE LENGTH MIN MM 175
PLATE THICKNESS MAX MM 50
CHAMFER ANGLE ° 45
FEED RATE MAX M / MIN 7.5
HIGH-FREQUENCY MOTORS
KAPPMESSER
WORKPIECE FEED ROLLERS
CE MARK
DIMENSIONS 2500 X 1700 X 1600 MM
WEIGHT 600 KG

Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-8 up ctp system for conventional plates
basysprint 855
year: bough as test machien fom manufacture and installed in 2012
with sca autoloader 1 x cassette
with punch for komori
1 headmachine led laser
counter shows 50,000 plates but server has been changed and it produced 100,000
with processor interplater 88
with agfa apogee workflow
location: germany available: now
price: on request 8 UP CTP SYSTEM FOR CONVENTIONAL PLATES BASYSPRINT 855 YEAR: BOUGH AS TEST MACHIEN FOM MANUFACTURE AND INSTALLED IN 2012 WITH SCA AUTOLOADER 1 X CASSETTE WITH PUNCH FOR KOMORI 1 HEADMACHINE LED LASER COUNTER SHOWS 50,000 PLATES BUT SERVER HAS BEEN CHANGED AND IT PRODUCED 100,000 WITH PROCESSOR INTERPLATER 88 WITH AGFA APOGEE WORKFLOW LOCATION: GERMANY AVAILABLE: NOW PRICE: ON REQUEST
Vendedor: USED Machines
Año de construcción: usado
Precio: used machinery auction RESALE 2.700 €
Ubicación: Land-weight approx.: 2300 kg<br/>dimensions (l x w x h) approx.: 2600 x 2100 x 1900 mm<br/>description: <b>maho mh 600 e cnc milling machine</b><br> - serial no.: 63171<br> - control system: phillips cnc 432<br> - tool holder: sk 40<br> - travels x/y/z: 600/400/450 mm<br> - table dimensions: 1000 x 400 mm<br> - speed range: 80 - 4000 rpm<br> - feed range: 0,1 - 2000 mm/min<br> - rapid traverse x/y/z: 5/3/5 m/min<br> - total connected load: 16 kw<br> - head with quill: 80 mm stroke<br> - manual slewable (vertical and horizontal)<br> - inclusive hydraulical machine vice hilma and rotary plate, jaw width: 160 mm<br> - with tool holders and wohlhaupter boring head<br> - see video as well WEIGHT APPROX.: 2300 KG
DIMENSIONS (L X W X H) APPROX.: 2600 X 2100 X 1900 MM
DESCRIPTION: MAHO MH 600 E CNC MILLING MACHINE
- SERIAL NO.: 63171
- CONTROL SYSTEM: PHILLIPS CNC 432
- TOOL HOLDER: SK 40
- TRAVELS X/Y/Z: 600/400/450 MM
- TABLE DIMENSIONS: 1000 X 400 MM
- SPEED RANGE: 80 - 4000 RPM
- FEED RANGE: 0,1 - 2000 MM/MIN
- RAPID TRAVERSE X/Y/Z: 5/3/5 M/MIN
- TOTAL CONNECTED LOAD: 16 KW
- HEAD WITH QUILL: 80 MM STROKE
- MANUAL SLEWABLE (VERTICAL AND HORIZONTAL)
- INCLUSIVE HYDRAULICAL MACHINE VICE HILMA AND ROTARY PLATE, JAW WIDTH: 160 MM
- WITH TOOL HOLDERS AND WOHLHAUPTER BORING HEAD
- SEE VIDEO AS WELL
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-- parts washing plant eisenmann, bj. 1998
- drying oven eisenmann, bj. 1998
- automatic powder booth wagner, bj. 1997
- manual spray booth wagner, bj. 2004
- stoving oven eisenmann, bj. 1994
- water treatment plant, year 1998/2005
- chain conveyor teleflex

condition: good, fully functional

pistols and controls of the handpaintings are not included in the sales volume

for detailed information see pdf file    - PARTS WASHING PLANT EISENMANN, BJ. 1998 - DRYING OVEN EISENMANN, BJ. 1998 - AUTOMATIC POWDER BOOTH WAGNER, BJ. 1997 - MANUAL SPRAY BOOTH WAGNER, BJ. 2004 - STOVING OVEN EISENMANN, BJ. 1994 - WATER TREATMENT PLANT, YEAR 1998/2005 - CHAIN CONVEYOR TELEFLEX CONDITION: GOOD, FULLY FUNCTIONAL PISTOLS AND CONTROLS OF THE HANDPAINTINGS ARE NOT INCLUDED IN THE SALES VOLUME FOR DETAILED INFORMATION SEE PDF FILE
Vendedor: Alfred Feldmann Werkzeugmaschinen
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 600 x 600 x 1400 mm<br/>description: with operating panel, see photos for details WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 600 X 1400 MM
DESCRIPTION: WITH OPERATING PANEL, SEE PHOTOS FOR DETAILS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-suitable for printing self adhesive labels and flexible packaging &gt; 20 micron
age 2007 / 2008 installation
4 colours
printing width: 420 mm
maximum unwind diameter: 1000 mm
maximum rewind diameter: 1000 mm

experience with alu foil 28 micron.
platform for extra printing stations material width: 430mm
the unwinding and rewinding shaft: 76mm
static bar corona treater vetaphone
web guide bst
web cleaner teknek
delam relam unit uv drying system by weight 3 hot air units chill water-cooled drums
chiller included
3 the cutting station matrix rewinder 
 SUITABLE FOR PRINTING SELF ADHESIVE LABELS AND FLEXIBLE PACKAGING &GT; 20 MICRON AGE 2007 / 2008 INSTALLATION 4 COLOURS PRINTING WIDTH: 420 MM MAXIMUM UNWIND DIAMETER: 1000 MM MAXIMUM REWIND DIAMETER: 1000 MM EXPERIENCE WITH ALU FOIL 28 MICRON. PLATFORM FOR EXTRA PRINTING STATIONS MATERIAL WIDTH: 430MM THE UNWINDING AND REWINDING SHAFT: 76MM STATIC BAR CORONA TREATER VETAPHONE WEB GUIDE BST WEB CLEANER TEKNEK DELAM RELAM UNIT UV DRYING SYSTEM BY WEIGHT 3 HOT AIR UNITS CHILL WATER-COOLED DRUMS CHILLER INCLUDED 3 THE CUTTING STATION MATRIX REWINDER
Vendedor: Grafimex GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-weight approx.: 140 kg<br/>dimensions (l x w x h) approx.: 1600 x 1200 x 1300 mm<br/>description: workpiece width max 150 mm. 240 ° max. WEIGHT APPROX.: 140 KG
DIMENSIONS (L X W X H) APPROX.: 1600 X 1200 X 1300 MM
DESCRIPTION: WORKPIECE WIDTH MAX 150 MM. 240 ° MAX.
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)