83 ofertas

Año de construcción: usado
Ubicación: Land-last off code: dl-367dr registration: 25.04.2014 elapsed. hours of operation: 500,6 performance: 74, 9kw displacement: 4. 400ccm test badge: 4/2017 drive type: diesel maximum speed: motornr.: perkins 4-cylinder, turbo-diesel 4.4 l type, variant, version: t-l1/t1 003sp / - fin: 10stg00495 equity / total weight: 3.843/6.000kg 
facilities: 4 course, div. control panels, air conditioning, front and rear license launcher, additional lighting, tray plateau, div. storage compartments, front hydraulic lesnik prednja hidravlika shl 24, year 2014, powershiftgetriebe with load speed, power shuttle on the steering wheel is switchable, 32/32-speed transmission 3 dw rule hydraulic control units in the rear, joystick, rear pto with 540/750/1,000 rpm, ehr with external buttons, pin wave management, all wheel management with steering angle sensors, comfort seat, air conditioning, sunroof, 2 pcs. working lights front, 2 pcs. working light rear, 2-circuit compressed air brake system, mounting air, tow bar adjustable tires: rear galaxy 480/70 r34, front: galaxy 380/70 r24 documentation: licence of types of available key: 1 comments to the condition: expressly stated, that no complete inventory and check the functionality of the auction object performed. there is still the possibility that there are significant defects. to learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. the auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. please note also the general terms and conditions of auction. 
system number: LAST OFF CODE: DL-367DR REGISTRATION: 25.04.2014 ELAPSED. HOURS OF OPERATION: 500,6 PERFORMANCE: 74, 9KW DISPLACEMENT: 4. 400CCM TEST BADGE: 4/2017 DRIVE TYPE: DIESEL MAXIMUM SPEED: MOTORNR.: PERKINS 4-CYLINDER, TURBO-DIESEL 4.4 L TYPE, VARIANT, VERSION: T-L1/T1 003SP / - FIN: 10STG00495 EQUITY / TOTAL WEIGHT: 3.843/6.000KG FACILITIES: 4 COURSE, DIV. CONTROL PANELS, AIR CONDITIONING, FRONT AND REAR LICENSE LAUNCHER, ADDITIONAL LIGHTING, TRAY PLATEAU, DIV. STORAGE COMPARTMENTS, FRONT HYDRAULIC LESNIK PREDNJA HIDRAVLIKA SHL 24, YEAR 2014, POWERSHIFTGETRIEBE WITH LOAD SPEED, POWER SHUTTLE ON THE STEERING WHEEL IS SWITCHABLE, 32/32-SPEED TRANSMISSION 3 DW RULE HYDRAULIC CONTROL UNITS IN THE REAR, JOYSTICK, REAR PTO WITH 540/750/1,000 RPM, EHR WITH EXTERNAL BUTTONS, PIN WAVE MANAGEMENT, ALL WHEEL MANAGEMENT WITH STEERING ANGLE SENSORS, COMFORT SEAT, AIR CONDITIONING, SUNROOF, 2 PCS. WORKING LIGHTS FRONT, 2 PCS. WORKING LIGHT REAR, 2-CIRCUIT COMPRESSED AIR BRAKE SYSTEM, MOUNTING AIR, TOW BAR ADJUSTABLE TIRES: REAR GALAXY 480/70 R34, FRONT: GALAXY 380/70 R24 DOCUMENTATION: LICENCE OF TYPES OF AVAILABLE KEY: 1 COMMENTS TO THE CONDITION: EXPRESSLY STATED, THAT NO COMPLETE INVENTORY AND CHECK THE FUNCTIONALITY OF THE AUCTION OBJECT PERFORMED. THERE IS STILL THE POSSIBILITY THAT THERE ARE SIGNIFICANT DEFECTS. TO LEARN ABOUT THE CONDITION AND THE EFFICIENCY OF THE AUCTION OBJECT, THE POSSIBILITY OF THE VISIT AND THIS IS HIGHLY RECOMMENDED. THE AUCTIONEER ASSUMES NO RESPONSIBILITY FOR THE QUALITY, CONDITION, COMPLETENESS, ACCESSORIES, SPECIAL PROPERTIES, OPEN OR HIDDEN DEFECTS AND OTHER DAMAGES. PLEASE NOTE ALSO THE GENERAL TERMS AND CONDITIONS OF AUCTION. SYSTEM NUMBER:
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Precio: 19.900 €
Ubicación: Land-; accessories: garnbindung, netzbindung, schneidwerk, einachser; working width [cm]: 210 ; ACCESSORIES: GARNBINDUNG, NETZBINDUNG, SCHNEIDWERK, EINACHSER; WORKING WIDTH [CM]: 210
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-read operating hours: 6.523 hours registration: 14.10.1986 fin: 21592/0868 type, variant, version: 8060 4wd indicator: bra 80137 test badge: no test notice pursuant to ⧠57a, authorities are to take over power from the buyer: 35 kw displacement: 2,592 of cc drive type : diesel equity / total weight: 2,760/3,800 kg color: grey equipment: seat 1, with top mounted signal light tyres: front 275/80-18, rear 14.9-28 documentation: licence of types of available key: 1 notes to the state: vehicle was as spare parts used paint largely bleached out, sticker residue, prov. repainting were performed, heavily used rust all around vehicle, interior, front axle, clutch heavily worn, motor leaking expressly pointed out, that no complete inventory and review of functionality of the auction object has been performed. there is still the possibility that there are significant defects. to learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. the auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. please note also the general terms and conditions of auction. READ OPERATING HOURS: 6.523 HOURS REGISTRATION: 14.10.1986 FIN: 21592/0868 TYPE, VARIANT, VERSION: 8060 4WD INDICATOR: BRA 80137 TEST BADGE: NO TEST NOTICE PURSUANT TO § 57A, AUTHORITIES ARE TO TAKE OVER POWER FROM THE BUYER: 35 KW DISPLACEMENT: 2,592 OF CC DRIVE TYPE : DIESEL EQUITY / TOTAL WEIGHT: 2,760/3,800 KG COLOR: GREY EQUIPMENT: SEAT 1, WITH TOP MOUNTED SIGNAL LIGHT TYRES: FRONT 275/80-18, REAR 14.9-28 DOCUMENTATION: LICENCE OF TYPES OF AVAILABLE KEY: 1 NOTES TO THE STATE: VEHICLE WAS AS SPARE PARTS USED PAINT LARGELY BLEACHED OUT, STICKER RESIDUE, PROV. REPAINTING WERE PERFORMED, HEAVILY USED RUST ALL AROUND VEHICLE, INTERIOR, FRONT AXLE, CLUTCH HEAVILY WORN, MOTOR LEAKING EXPRESSLY POINTED OUT, THAT NO COMPLETE INVENTORY AND REVIEW OF FUNCTIONALITY OF THE AUCTION OBJECT HAS BEEN PERFORMED. THERE IS STILL THE POSSIBILITY THAT THERE ARE SIGNIFICANT DEFECTS. TO LEARN ABOUT THE CONDITION AND THE EFFICIENCY OF THE AUCTION OBJECT, THE POSSIBILITY OF THE VISIT AND THIS IS HIGHLY RECOMMENDED. THE AUCTIONEER ASSUMES NO RESPONSIBILITY FOR THE QUALITY, CONDITION, COMPLETENESS, ACCESSORIES, SPECIAL PROPERTIES, OPEN OR HIDDEN DEFECTS AND OTHER DAMAGES. PLEASE NOTE ALSO THE GENERAL TERMS AND CONDITIONS OF AUCTION.
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Precio: used machinery auction RESALE 5.000 €
Ubicación: Land-anker maschinenbau labelling machine for cans, type: lw variant 5, fabrication number: 0934-97-116l, year of construction: 1997, 400 v, 50 hz, capacity: 150 labels per minute, s/s belt, belt width: 80 mm, becker vacuum pump, type: vt 3.25, total dimensions: 3600 mm x 1500 mm x 1700 mm. ANKER MASCHINENBAU LABELLING MACHINE FOR CANS, TYPE: LW VARIANT 5, FABRICATION NUMBER: 0934-97-116L, YEAR OF CONSTRUCTION: 1997, 400 V, 50 HZ, CAPACITY: 150 LABELS PER MINUTE, S/S BELT, BELT WIDTH: 80 MM, BECKER VACUUM PUMP, TYPE: VT 3.25, TOTAL DIMENSIONS: 3600 MM X 1500 MM X 1700 MM.
Vendedor: Industrial Auctions BV
Año de construcción: usado
Ubicación: Land-read operating hours: 2.491 h first registration: 07.12.2011 fin: zbbn17891 type, variant, version: bn/bnlcfx/vred indicator: gr-363 dm performance: 118kw displacement: 6. 728ccm drive type: diesel equity / total weight: 6.785/10.000kg color: blue facilities: continuously variable gear, sprung vorcherachse, front hydraulic pto and connections front compressed air, 4 controllers, trailer hitch, hydraulic top link, deluxe radio, deluxe seat tyres: bayside 650/65 r38 rear, 540/65 r28 front documentation: licence of types of present key: 1 notes to the state: cleaning needs, abrasions around on the tractor is pointed out explicitly that no complete inventory and check the functionality of the auction object performed. there is still the possibility that there are significant defects. to learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. the auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. please note also the general terms and conditions of auction. READ OPERATING HOURS: 2.491 H FIRST REGISTRATION: 07.12.2011 FIN: ZBBN17891 TYPE, VARIANT, VERSION: BN/BNLCFX/VRED INDICATOR: GR-363 DM PERFORMANCE: 118KW DISPLACEMENT: 6. 728CCM DRIVE TYPE: DIESEL EQUITY / TOTAL WEIGHT: 6.785/10.000KG COLOR: BLUE FACILITIES: CONTINUOUSLY VARIABLE GEAR, SPRUNG VORCHERACHSE, FRONT HYDRAULIC PTO AND CONNECTIONS FRONT COMPRESSED AIR, 4 CONTROLLERS, TRAILER HITCH, HYDRAULIC TOP LINK, DELUXE RADIO, DELUXE SEAT TYRES: BAYSIDE 650/65 R38 REAR, 540/65 R28 FRONT DOCUMENTATION: LICENCE OF TYPES OF PRESENT KEY: 1 NOTES TO THE STATE: CLEANING NEEDS, ABRASIONS AROUND ON THE TRACTOR IS POINTED OUT EXPLICITLY THAT NO COMPLETE INVENTORY AND CHECK THE FUNCTIONALITY OF THE AUCTION OBJECT PERFORMED. THERE IS STILL THE POSSIBILITY THAT THERE ARE SIGNIFICANT DEFECTS. TO LEARN ABOUT THE CONDITION AND THE EFFICIENCY OF THE AUCTION OBJECT, THE POSSIBILITY OF THE VISIT AND THIS IS HIGHLY RECOMMENDED. THE AUCTIONEER ASSUMES NO RESPONSIBILITY FOR THE QUALITY, CONDITION, COMPLETENESS, ACCESSORIES, SPECIAL PROPERTIES, OPEN OR HIDDEN DEFECTS AND OTHER DAMAGES. PLEASE NOTE ALSO THE GENERAL TERMS AND CONDITIONS OF AUCTION.
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Precio: used machinery auction RESALE 1.600 €
Ubicación: Land-weight approx.: 2000 kg<br/>dimensions (l x w x h) approx.: 6000 x 2500 x 1800 mm<br/>description: 77kw/105 ps,gebnz,divided back seat, klimatronic, lra, mal,multiflkrd,navi,neb, rcd, rain sensor,railing, particulate filter, cheuquebook, sport seats,sv, speed, zv, 4efh, 5 gear, ab front, ab side front, abs, ahk, alu, bc, col,esp,espgl.hzg WEIGHT APPROX.: 2000 KG
DIMENSIONS (L X W X H) APPROX.: 6000 X 2500 X 1800 MM
DESCRIPTION: 77KW/105 PS,GEBNZ,DIVIDED BACK SEAT, KLIMATRONIC, LRA, MAL,MULTIFLKRD,NAVI,NEB, RCD, RAIN SENSOR,RAILING, PARTICULATE FILTER, CHEUQUEBOOK, SPORT SEATS,SV, SPEED, ZV, 4EFH, 5 GEAR, AB FRONT, AB SIDE FRONT, ABS, AHK, ALU, BC, COL,ESP,ESPGL.HZG
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-read mileage: 17.898 km
matriculation year: exportieren
fin: wmax31zzz1w044249
type, variant, version: vfaeg/e2/36.000
code: sw-203fw
test badge: 06/2019
: kw 735
maximum speed: 138 km/h
displacement: 21.927 cc
drive type: diesel
equity / total weight: 22.197/32,000 kg
color: red
facilities: 2 pcs. seats, roof hatch access, div. of counter space, storage boxes, left, right and at the rear, head for roof access,
tires: 16.00/r20
documentation: types of licence available
key: 1
comments to the state: abrasions all around vehicle, sticker residue around vehicle
expressly stated, that no complete inventory and check the functionality of the auction object performed. there is still the possibility that there are significant defects. to learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. the auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. please note also the general terms and conditions and auktionsbedingungen.anlagenummer: 4350505 READ MILEAGE: 17.898 KM MATRICULATION YEAR: EXPORTIEREN FIN: WMAX31ZZZ1W044249 TYPE, VARIANT, VERSION: VFAEG/E2/36.000 CODE: SW-203FW TEST BADGE: 06/2019 : KW 735 MAXIMUM SPEED: 138 KM/H DISPLACEMENT: 21.927 CC DRIVE TYPE: DIESEL EQUITY / TOTAL WEIGHT: 22.197/32,000 KG COLOR: RED FACILITIES: 2 PCS. SEATS, ROOF HATCH ACCESS, DIV. OF COUNTER SPACE, STORAGE BOXES, LEFT, RIGHT AND AT THE REAR, HEAD FOR ROOF ACCESS, TIRES: 16.00/R20 DOCUMENTATION: TYPES OF LICENCE AVAILABLE KEY: 1 COMMENTS TO THE STATE: ABRASIONS ALL AROUND VEHICLE, STICKER RESIDUE AROUND VEHICLE EXPRESSLY STATED, THAT NO COMPLETE INVENTORY AND CHECK THE FUNCTIONALITY OF THE AUCTION OBJECT PERFORMED. THERE IS STILL THE POSSIBILITY THAT THERE ARE SIGNIFICANT DEFECTS. TO LEARN ABOUT THE CONDITION AND THE EFFICIENCY OF THE AUCTION OBJECT, THE POSSIBILITY OF THE VISIT AND THIS IS HIGHLY RECOMMENDED. THE AUCTIONEER ASSUMES NO RESPONSIBILITY FOR THE QUALITY, CONDITION, COMPLETENESS, ACCESSORIES, SPECIAL PROPERTIES, OPEN OR HIDDEN DEFECTS AND OTHER DAMAGES. PLEASE NOTE ALSO THE GENERAL TERMS AND CONDITIONS AND AUKTIONSBEDINGUNGEN.ANLAGENUMMER: 4350505
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Precio: used machinery auction RESALE 350 €
Ubicación: Land-weight approx.: 280 kg<br/>dimensions (l x w x h) approx.: 2000 x 800 x 1100 mm<br/>description: composed of: 1 sanding aggregate power 2hp, speed 1400 rpm, mounted on a cast dovetail slide , drive variant by belt and pulley, bakelite work surface size 2000 x 760 mm, height over ground approx. 890 mm, grinding machine Ø: min. 80 mm, max. 280 mm, max. grinding machine height 90 mm, with swivel casters, see photos WEIGHT APPROX.: 280 KG
DIMENSIONS (L X W X H) APPROX.: 2000 X 800 X 1100 MM
DESCRIPTION: COMPOSED OF: 1 SANDING AGGREGATE POWER 2HP, SPEED 1400 RPM, MOUNTED ON A CAST DOVETAIL SLIDE , DRIVE VARIANT BY BELT AND PULLEY, BAKELITE WORK SURFACE SIZE 2000 X 760 MM, HEIGHT OVER GROUND APPROX. 890 MM, GRINDING MACHINE Ø: MIN. 80 MM, MAX. 280 MM, MAX. GRINDING MACHINE HEIGHT 90 MM, WITH SWIVEL CASTERS, SEE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 4.500 €
Ubicación: Land-pallet rack, 6, 50 m high, used 1 ton / range, about 544 pitches â?? -:
 
price from site: â?¬4.500.-(net), dismantled and loaded:
 
manufacturer: gs scaffalature engineering
model: variant stand type: v15 r30
shelf loads: 3200 kg box load: 18000 kg (with buckling length 1500 mm)
approx. 35 pcs shelf stand 6500 mm high
about 284 pcs shelf holme length 2700 mm
about 20 pcs shelf holme length 1500 mm
approx. 12 pcs shelf holme length 1800 mm
available: timely
condition: used, well
location: d-96342 stock home PALLET RACK, 6, 50 M HIGH, USED 1 TON / RANGE, ABOUT 544 PITCHES &ACIRC;?? -: PRICE FROM SITE: &ACIRC;?&NOT;4.500.-(NET), DISMANTLED AND LOADED: MANUFACTURER: GS SCAFFALATURE ENGINEERING MODEL: VARIANT STAND TYPE: V15 R30 SHELF LOADS: 3200 KG BOX LOAD: 18000 KG (WITH BUCKLING LENGTH 1500 MM) APPROX. 35 PCS SHELF STAND 6500 MM HIGH ABOUT 284 PCS SHELF HOLME LENGTH 2700 MM ABOUT 20 PCS SHELF HOLME LENGTH 1500 MM APPROX. 12 PCS SHELF HOLME LENGTH 1800 MM AVAILABLE: TIMELY CONDITION: USED, WELL LOCATION: D-96342 STOCK HOME
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-large reamers available in a wide range of variants LARGE REAMERS AVAILABLE IN A WIDE RANGE OF VARIANTS
Vendedor: Peter Jüttermann Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-* direct importer *

* lowest price guarantee *

-ce certificate,
-guarantee and post-guarantee service
-new machine
-in stock

technical parameters:

, cuts and stick crown

-thickness of edging 0.3-3 mm
-the width of the flange 10-65 mm
-shaft height 15-8 cm
-the minimum radius of 20 °
-3 speed
-heat output 1.65 kw
-pressure 6 bar

-dimensions: length 1100 x w. 830 x h. 1150
-weight 195 kg

-pneumatic shears for cutting flanges (tape stuck on)
-robust, rugged design
-input sensor and the truncation of the tape
-automatic download and cut strips from the tray
-easy-to-use and convenient embedded control panel

two variants of adhesive!

1. directly on the plate
2. directly to a disc

why is it so important?

hotmelt adhesive during the wrapping straight edges is applied on the plate which is then pressed against the tape. this is very good because the glued rim to the board clearly reduces dirt and causes a very strong glue. the big advantage of such machines and especially by wrapping a thin flange is that there are no wci?gi-surface is smooth.

this machine has the ability to apply the arcs.
the glue is applied on the rim. depending on the shape of the edge banded plates it is possible to set the rolls on the table in the right configuration, which allows for the free running of the arc with a roll of adhesive.

-external dimensions 1350 x 850 x 980 mm * DIRECT IMPORTER * * LOWEST PRICE GUARANTEE * -CE CERTIFICATE, -GUARANTEE AND POST-GUARANTEE SERVICE -NEW MACHINE -IN STOCK TECHNICAL PARAMETERS: , CUTS AND STICK CROWN -THICKNESS OF EDGING 0.3-3 MM -THE WIDTH OF THE FLANGE 10-65 MM -SHAFT HEIGHT 15-8 CM -THE MINIMUM RADIUS OF 20 ° -3 SPEED -HEAT OUTPUT 1.65 KW -PRESSURE 6 BAR -DIMENSIONS: LENGTH 1100 X W. 830 X H. 1150 -WEIGHT 195 KG -PNEUMATIC SHEARS FOR CUTTING FLANGES (TAPE STUCK ON) -ROBUST, RUGGED DESIGN -INPUT SENSOR AND THE TRUNCATION OF THE TAPE -AUTOMATIC DOWNLOAD AND CUT STRIPS FROM THE TRAY -EASY-TO-USE AND CONVENIENT EMBEDDED CONTROL PANEL TWO VARIANTS OF ADHESIVE! 1. DIRECTLY ON THE PLATE 2. DIRECTLY TO A DISC WHY IS IT SO IMPORTANT? HOTMELT ADHESIVE DURING THE WRAPPING STRAIGHT EDGES IS APPLIED ON THE PLATE WHICH IS THEN PRESSED AGAINST THE TAPE. THIS IS VERY GOOD BECAUSE THE GLUED RIM TO THE BOARD CLEARLY REDUCES DIRT AND CAUSES A VERY STRONG GLUE. THE BIG ADVANTAGE OF SUCH MACHINES AND ESPECIALLY BY WRAPPING A THIN FLANGE IS THAT THERE ARE NO WCI?GI-SURFACE IS SMOOTH. THIS MACHINE HAS THE ABILITY TO APPLY THE ARCS. THE GLUE IS APPLIED ON THE RIM. DEPENDING ON THE SHAPE OF THE EDGE BANDED PLATES IT IS POSSIBLE TO SET THE ROLLS ON THE TABLE IN THE RIGHT CONFIGURATION, WHICH ALLOWS FOR THE FREE RUNNING OF THE ARC WITH A ROLL OF ADHESIVE. -EXTERNAL DIMENSIONS 1350 X 850 X 980 MM
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-brikettierpresse reinbold rb 20 sv\r\n\r\ndie rb sv baureihe von reinbold ist technisch ausgereift und gleichzeitig mit neuen features ausgestattet. die baureihe umfasst zahlreiche varianten und ist für den betrieb mit jeglichen brikettierbaren wertstoffen geeignet.\r\n\r\nihre vorteile:\r\nkostengünstige entsorgung von brikettfähigen materialien\r\nbedienerfreundlich z.b. durch einfache wartung\r\nniedrige betriebskosten\r\n\r\nserienausstattung:\r\nhydrauliktank mit hydrauliköl, pumpemotor und ventilsteuerung\r\npermanent rührwerk\r\nschneckenkanal mit schneckenaustrag\r\nhandsteuerung\r\nautomatische endstellung aller zylinder\r\nbehälter: 1044 x 1044 x 1010 mm\r\nÖlmangelschalter\r\nsicherheitsschalter für Öltemperatur\r\nverchromte zange\r\n\r\nanschlussteil für transportrohr oder austragung\r\nautomatische brikettlängenüberwachung (stranglängenüberwachung)\r\nschaltschrank mit sps-steuerung (montiert an behälter)\r\nspannung: 400 volt - 50 hz - 3 ph. (sonderspannungen auf anfrage)\r\ngrundrahmen mit schwingungsdämpfenden gummifüßen\r\ngs - zeichen (staub geprüft) & ce - zeichen\r\n\r\ntechnische daten:\r\nleistung hydraulikmotor: 4 kw - 400 v - 50 hz\r\nbrikettdurchmesser: 40 mm\r\nÖlmenge: 100 liter\r\nleistung: ca. 20 - 40 kg/h (materialabhängig)\r\ngewicht: ca. 600 kg\r\n\r\ngrößere versionen der maschine und sonderausstattung auf anfrage BRIKETTIERPRESSE REINBOLD RB 20 SV\R\N\R\NDIE RB SV BAUREIHE VON REINBOLD IST TECHNISCH AUSGEREIFT UND GLEICHZEITIG MIT NEUEN FEATURES AUSGESTATTET. DIE BAUREIHE UMFASST ZAHLREICHE VARIANTEN UND IST FüR DEN BETRIEB MIT JEGLICHEN BRIKETTIERBAREN WERTSTOFFEN GEEIGNET.\R\N\R\NIHRE VORTEILE:\R\NKOSTENGüNSTIGE ENTSORGUNG VON BRIKETTFäHIGEN MATERIALIEN\R\NBEDIENERFREUNDLICH Z.B. DURCH EINFACHE WARTUNG\R\NNIEDRIGE BETRIEBSKOSTEN\R\N\R\NSERIENAUSSTATTUNG:\R\NHYDRAULIKTANK MIT HYDRAULIKöL, PUMPEMOTOR UND VENTILSTEUERUNG\R\NPERMANENT RüHRWERK\R\NSCHNECKENKANAL MIT SCHNECKENAUSTRAG\R\NHANDSTEUERUNG\R\NAUTOMATISCHE ENDSTELLUNG ALLER ZYLINDER\R\NBEHäLTER: 1044 X 1044 X 1010 MM\R\NÖLMANGELSCHALTER\R\NSICHERHEITSSCHALTER FüR ÖLTEMPERATUR\R\NVERCHROMTE ZANGE\R\N\R\NANSCHLUSSTEIL FüR TRANSPORTROHR ODER AUSTRAGUNG\R\NAUTOMATISCHE BRIKETTLäNGENüBERWACHUNG (STRANGLäNGENüBERWACHUNG)\R\NSCHALTSCHRANK MIT SPS-STEUERUNG (MONTIERT AN BEHäLTER)\R\NSPANNUNG: 400 VOLT - 50 HZ - 3 PH. (SONDERSPANNUNGEN AUF ANFRAGE)\R\NGRUNDRAHMEN MIT SCHWINGUNGSDäMPFENDEN GUMMIFüßEN\R\NGS - ZEICHEN (STAUB GEPRüFT) & CE - ZEICHEN\R\N\R\NTECHNISCHE DATEN:\R\NLEISTUNG HYDRAULIKMOTOR: 4 KW - 400 V - 50 HZ\R\NBRIKETTDURCHMESSER: 40 MM\R\NÖLMENGE: 100 LITER\R\NLEISTUNG: CA. 20 - 40 KG/H (MATERIALABHäNGIG)\R\NGEWICHT: CA. 600 KG\R\N\R\NGRößERE VERSIONEN DER MASCHINE UND SONDERAUSSTATTUNG AUF ANFRAGE
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-
edgebander cormak ebm-380

, cuts and stick crown

-machine in stock
-after reviewing the technical
-ready to go
-year of manufacture 2015

technical parameters:

-thickness of edging 0.3-3 mm
-the width of the flange 10-65 mm
-shaft height 15-8 cm
-the minimum radius of 20 °
-3 speed
-heat output 1.65 kw
-pressure 6 bar

-pneumatic shears for cutting flanges (tape stuck on)
-robust, rugged design
-input sensor and the truncation of the tape
-automatic download and cut strips from the tray
-easy-to-use and convenient embedded control panel

dimensions:
-length: 1100 mm
-width: 830 mm
-height: 1150 mm

-weight 195 kg

two variants of adhesive!
1. directly on the plate
2. directly to a disc EDGEBANDER CORMAK EBM-380 , CUTS AND STICK CROWN -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -READY TO GO -YEAR OF MANUFACTURE 2015 TECHNICAL PARAMETERS: -THICKNESS OF EDGING 0.3-3 MM -THE WIDTH OF THE FLANGE 10-65 MM -SHAFT HEIGHT 15-8 CM -THE MINIMUM RADIUS OF 20 ° -3 SPEED -HEAT OUTPUT 1.65 KW -PRESSURE 6 BAR -PNEUMATIC SHEARS FOR CUTTING FLANGES (TAPE STUCK ON) -ROBUST, RUGGED DESIGN -INPUT SENSOR AND THE TRUNCATION OF THE TAPE -AUTOMATIC DOWNLOAD AND CUT STRIPS FROM THE TRAY -EASY-TO-USE AND CONVENIENT EMBEDDED CONTROL PANEL DIMENSIONS: -LENGTH: 1100 MM -WIDTH: 830 MM -HEIGHT: 1150 MM -WEIGHT 195 KG TWO VARIANTS OF ADHESIVE! 1. DIRECTLY ON THE PLATE 2. DIRECTLY TO A DISC
Vendedor: StanDrew
Año de construcción: usado
Precio: 19.800 €
Ubicación: Land-; accessories: garnbindung, netzbindung, rollenniederhalter, schneidwerk, einachser; working width [cm]: 210 ; ACCESSORIES: GARNBINDUNG, NETZBINDUNG, ROLLENNIEDERHALTER, SCHNEIDWERK, EINACHSER; WORKING WIDTH [CM]: 210
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-control: cnc 836mefi
maximum workpiece length 300 mm.
turning diameter 110 mm.
swing over 360 mm. CONTROL: CNC 836MEFI MAXIMUM WORKPIECE LENGTH 300 MM. TURNING DIAMETER 110 MM. SWING OVER 360 MM.
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Ubicación: Land-workpiece length: 100 mm<br/>swing diameter: 80 mm<br/>number of spindles: 2 <br/>control: sin840d <br/>workpiece weight: 2,00 kg<br/>centre height: 170 mm<br/>grinding wheel diameter: 100 mm<br/>grinding wheel hole diameter: 32 <br/>grinding wheel width max.: 20 <br/>peripheral speed: max. 125 m/sec<br/>passage of steadyrest: 45 - 60 mm<br/>total power requirement: 75,00 kw<br/>weight of the machine ca.: 25,00 t<br/>dimensions of the machine ca.: 5,00 x 3,50 x h3,50 m<br/>cam grinding machine with siemens sinumerik 840d control,<br/>loading/unloading unit, co2 extinguishing system, cbn grinding wheel,<br/>tailstock, steady, diamond wheel dresser mounted on the dressing spindle,<br/>wheelhead variant 12 (two grinding spindles can be moved separately).<br/><br/><br/><br/><br/> WORKPIECE LENGTH: 100 MM
SWING DIAMETER: 80 MM
NUMBER OF SPINDLES: 2
CONTROL: SIN840D
WORKPIECE WEIGHT: 2,00 KG
CENTRE HEIGHT: 170 MM
GRINDING WHEEL DIAMETER: 100 MM
GRINDING WHEEL HOLE DIAMETER: 32
GRINDING WHEEL WIDTH MAX.: 20
PERIPHERAL SPEED: MAX. 125 M/SEC
PASSAGE OF STEADYREST: 45 - 60 MM
TOTAL POWER REQUIREMENT: 75,00 KW
WEIGHT OF THE MACHINE CA.: 25,00 T
DIMENSIONS OF THE MACHINE CA.: 5,00 X 3,50 X H3,50 M
CAM GRINDING MACHINE WITH SIEMENS SINUMERIK 840D CONTROL,
LOADING/UNLOADING UNIT, CO2 EXTINGUISHING SYSTEM, CBN GRINDING WHEEL,
TAILSTOCK, STEADY, DIAMOND WHEEL DRESSER MOUNTED ON THE DRESSING SPINDLE,
WHEELHEAD VARIANT 12 (TWO GRINDING SPINDLES CAN BE MOVED SEPARATELY).




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-abb robot

type: irb 6600 m2000
robot variant : irb 6650-200/2 75 type b
protection: standard


weight: 1780 kg ABB ROBOT TYPE: IRB 6600 M2000 ROBOT VARIANT : IRB 6650-200/2 75 TYPE B PROTECTION: STANDARD WEIGHT: 1780 KG
Vendedor: BASTA machinery
Año de construcción: usado
Ubicación: Land-workpiece length: 100 mm<br/>swing diameter: 80 mm<br/>number of spindles: 2 <br/>control: sin840d <br/>workpiece weight: 2,00 kg<br/>centre height: 170 mm<br/>grinding wheel diameter: 100 mm<br/>grinding wheel hole diameter: 32 <br/>grinding wheel width max.: 20 <br/>peripheral speed: max. 125 m/sec<br/>passage of steadyrest: 45 - 60 mm<br/>total power requirement: 75,00 kw<br/>weight of the machine ca.: 25,00 t<br/>dimensions of the machine ca.: 5,00 x 3,50 x h3,50 m<br/>cam grinding machine with siemens sinumerik 840d control, <br/>loading/unloading unit, co2 extinguishing system, cbn grinding wheel, <br/>tailstock, steady, diamond wheel dresser mounted on the dressing spindle, <br/>wheelhead variant 12 (two grinding spindles can be moved separately).<br/><br/><br/><br/><br/> WORKPIECE LENGTH: 100 MM
SWING DIAMETER: 80 MM
NUMBER OF SPINDLES: 2
CONTROL: SIN840D
WORKPIECE WEIGHT: 2,00 KG
CENTRE HEIGHT: 170 MM
GRINDING WHEEL DIAMETER: 100 MM
GRINDING WHEEL HOLE DIAMETER: 32
GRINDING WHEEL WIDTH MAX.: 20
PERIPHERAL SPEED: MAX. 125 M/SEC
PASSAGE OF STEADYREST: 45 - 60 MM
TOTAL POWER REQUIREMENT: 75,00 KW
WEIGHT OF THE MACHINE CA.: 25,00 T
DIMENSIONS OF THE MACHINE CA.: 5,00 X 3,50 X H3,50 M
CAM GRINDING MACHINE WITH SIEMENS SINUMERIK 840D CONTROL,
LOADING/UNLOADING UNIT, CO2 EXTINGUISHING SYSTEM, CBN GRINDING WHEEL,
TAILSTOCK, STEADY, DIAMOND WHEEL DRESSER MOUNTED ON THE DRESSING SPINDLE,
WHEELHEAD VARIANT 12 (TWO GRINDING SPINDLES CAN BE MOVED SEPARATELY).




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-machine : cnc gantry type, single pallet machine
manufacturer : forest ine
type : majormill
cnc control : siemens sinumeric 840
year of manufacture 2004
condition excellent
location europe
echnical specifications of the machine pallet length (b) mm 4000
pallet width (a) mm 2500
distance between uprights.	(em) mm 3500
distance under vertical spindle unit mm 1450
pallet table stroke – x axis (x) mm 4800
bottom slide stroke – y axis (y) mm 3800
ram stroke – z axis mm 1250
maximum charge on the pallet kg 1500
longitudinal movement of the table – x axis width of the table supporting the pallet mm 2200
length of the table supporting the pallet mm 4000
useful stroke of the table (inside the work area) mm 4800
speed feed mm/mn 30000
continuously variable feed rate mm/mn 1 up to 10000
positioning by measuring linear scale type heidenhain lb 382 c.
the pallet changing device is not integrated in our equipment
the pallet table is designed to receive the pallets
transversal movement of the bottom slide – y axis useful stroke of the bottom slide mm 3800
minimum distance between guideways mm 1100
high speed feed.	mm/mn 30000
continuous variance work advances mm/mn 1 up to 10000
positioning by measuring linear scale type heidenhain
ram - type z axis
ram movement mm 1250
high speed feed mm/mn 20000
stepless working feed mm/mn 1 up to 10000
positioning by measuring linear scale type heidenhain
milling head technical specification
rated power of the spindle motor kw 50
maximum power from.	rpm 200
milling head maximum torque nm 2388
distance between linear guideways mm 735
spindle speed depending of the type of accessory rpm 10 up to 4000
?ool clamping automatic
spindle unit clamping device
the bottom of the ram is equipped with automatic locking and unlocking device
angular orientation of the c axis accessories every 2.5 °
positioning by crown MACHINE : CNC GANTRY TYPE, SINGLE PALLET MACHINE MANUFACTURER : FOREST INE TYPE : MAJORMILL CNC CONTROL : SIEMENS SINUMERIC 840 YEAR OF MANUFACTURE 2004 CONDITION EXCELLENT LOCATION EUROPE ECHNICAL SPECIFICATIONS OF THE MACHINE PALLET LENGTH (B) MM 4000 PALLET WIDTH (A) MM 2500 DISTANCE BETWEEN UPRIGHTS. (EM) MM 3500 DISTANCE UNDER VERTICAL SPINDLE UNIT MM 1450 PALLET TABLE STROKE – X AXIS (X) MM 4800 BOTTOM SLIDE STROKE – Y AXIS (Y) MM 3800 RAM STROKE – Z AXIS MM 1250 MAXIMUM CHARGE ON THE PALLET KG 1500 LONGITUDINAL MOVEMENT OF THE TABLE – X AXIS WIDTH OF THE TABLE SUPPORTING THE PALLET MM 2200 LENGTH OF THE TABLE SUPPORTING THE PALLET MM 4000 USEFUL STROKE OF THE TABLE (INSIDE THE WORK AREA) MM 4800 SPEED FEED MM/MN 30000 CONTINUOUSLY VARIABLE FEED RATE MM/MN 1 UP TO 10000 POSITIONING BY MEASURING LINEAR SCALE TYPE HEIDENHAIN LB 382 C. THE PALLET CHANGING DEVICE IS NOT INTEGRATED IN OUR EQUIPMENT THE PALLET TABLE IS DESIGNED TO RECEIVE THE PALLETS TRANSVERSAL MOVEMENT OF THE BOTTOM SLIDE – Y AXIS USEFUL STROKE OF THE BOTTOM SLIDE MM 3800 MINIMUM DISTANCE BETWEEN GUIDEWAYS MM 1100 HIGH SPEED FEED. MM/MN 30000 CONTINUOUS VARIANCE WORK ADVANCES MM/MN 1 UP TO 10000 POSITIONING BY MEASURING LINEAR SCALE TYPE HEIDENHAIN RAM - TYPE Z AXIS RAM MOVEMENT MM 1250 HIGH SPEED FEED MM/MN 20000 STEPLESS WORKING FEED MM/MN 1 UP TO 10000 POSITIONING BY MEASURING LINEAR SCALE TYPE HEIDENHAIN MILLING HEAD TECHNICAL SPECIFICATION RATED POWER OF THE SPINDLE MOTOR KW 50 MAXIMUM POWER FROM. RPM 200 MILLING HEAD MAXIMUM TORQUE NM 2388 DISTANCE BETWEEN LINEAR GUIDEWAYS MM 735 SPINDLE SPEED DEPENDING OF THE TYPE OF ACCESSORY RPM 10 UP TO 4000 ?OOL CLAMPING AUTOMATIC SPINDLE UNIT CLAMPING DEVICE THE BOTTOM OF THE RAM IS EQUIPPED WITH AUTOMATIC LOCKING AND UNLOCKING DEVICE ANGULAR ORIENTATION OF THE C AXIS ACCESSORIES EVERY 2.5 ° POSITIONING BY CROWN "HIRTH" PRECISION: +/- 3 SECONDS HEADS HIGH TORQUE VERTICAL SPINDLE UNIT WITH AUTOMATIC CLAMPING SYSTEM UNDER THE RAM POWER KW 50 TORQUE NM 2388 TAPER HSK 100A SPINDLE SPEED RPM 10 UP TO 4000 TOOL CLAMPING AUTOMATIC UNIVERSAL SPINDLE UNIT WITH AUTOMATIC CLAMPING SYSTEM UNDER THE RAM POWER KW 26 TORQUE NM 496 TAPER HSK 100A SPINDLE SPEED RPM 10 UP TO 3000 TTOOL CLAMPING AUTOMATIC OPTIONAL: HORIZONTAL SPINDLE UNIT WITH AUTOMATIC CLAMPING SYSTEM UNDER THE RAM POWER – S1 KW 40 TAPER HSK 100A TORQUE NM 1910 SPINDLE SPEED RPM 10 UP TO 4000 TOOL CLAMPING AUTOMATIC ARGE CAPACITY TOOL STORAGE WITH ROBOT TOOLS TYPE HSK. A 100 THIS UNIT IS MADE WITH 2 PARTS INDEPENDENT OF THE MACHINE: 1 CIRCULAR STORAGE 1 ROBOT WITH 6 AXIS TAPER HSK. A 100 MAX TOOLS DIAMETER MM 125 MAX. DIAMETER OF TOOLS WITH NEIGHBORING FREE PLACES MM 340 MAXIMUM DIAMETER OF BORING BARS MM 500 MAX. TOOLS LENGTH MM 600 MAX TOOL WEIGHT KG 40 NUMBERS OF TOOLS IN THE FIXED MAGAZINE 183 + 14 TOOLS TIME FOR TOOL CHANGING (TOOL BY TOOL) (WITH VERTICAL AND HORIZONTAL SPINDLE UNIT) SEC. 10 OOLS CHANGER THE TOOL CHANGER IS A 6 AXIS ROBOT, SUPPLY WITH A TWO FINGERS MANIPULATOR. FIXED AND LEVEL ON THE GROUND IN HIS CENTER, IT ALLOWS AN INTERPOLATION OF THE 6 AXIS: TAKING AND REMOVING TOOLS FROM THE MODULES, THE EXCHANGE OF TOOLS ON THE VERTICAL OR HORIZONTAL PINS OF THE MACHINE, THIS MANIPULATOR IS CONTROLLED BY AN INDEPENDENT CONTROLLER, INTERFACED WITH THE NUMERICAL CONTROL OF THE MACHINE VIA A PROFIBUS LINK. MILLING UNITS STOCKAGE AND TRANSFER LOCATED ON THE LEFT OF THE MACHINE, BETWEEN THE COLUMN AND THE TOOL STORAGE, THE TRANSFER TO THE LOADING AREA IS MADE BY A HYDRAULIC MOVEMENT. AN EMPTY SLOT IS POSITIONED UNDER THE RAM TO REMOVE THE MILLING UNIT; THE RAM RETURNS TO THE STANDBY POSITION, THE DIGITALIZED ROTATION OF THE SUPPORT MAKE IT POSSIBLE TO INSTALL THE NEW MILLING UNIT IT ALLOWS TO STORE FOUR MILLING UNIT, EACH ONE IS CODED. WORKPIECE PROBE RENISHAW TYPE MP 16 SIGNALS TRANSMISSION WITH RADIO PROBE TRANSMISSION INCLUDING: 1 TRACER RMP2 1 INTERFACE MI 16 2 PROBE RMM2 1 CERAMIC STYLUS PS3 1C Æ 5 MM L 50 MM 1 TAPER HSK 100 STORAGE IN THE TOOL MAGAZINE PLANNED FOR AUTOMATIC MOUNTING OF EACH SPINDLE. CHIP CONVEYOR TYPE: METALLIC CONVEYOR BELTS 2 CONVEYORS, 300 MM WIDE, LOCATED ALONG THE TWO SIDES, POURING THE CHIPS IN A TRANSVERSE CONVEYOR, 350 MM WIDE, LOCATED AT THE FRONT OF THE MACHINE. CHIPS COLLECTING TANK @ NOT SUPPLIED SUPER-VISION" INTERACTIVE SUPPORT AND DIAGNOSTIC SYSTEM COOLANT MACHINE AIR CLEANER POWER MONITORING AND ADAPTIVE ADVANCED CONTROL TOOLS AND WEAR MANAGEMENT OVERSIGHT OF BREAKAGE TOOLS OPTIONAL: SPARE UNIVERSAL SPINDLE UNIT
Vendedor: PROFIT Machinery Point Ltd
Año de construcción: usado
Ubicación: Land-max. workpiece length: 4500 mm<br/>profile spindle: 1 stück<br/>main drive: 12 kw<br/>homag machining center genius bof 411/45 / pm<br/>-----------------------------------------------<br/>electronically controlled milling and drilling center for commission<br/>wise manufacture of furniture parts, solid wood parts and<br/>devices, e.g. windows, doors, stairs. with 1 main spindle.<br/><br/>brief description of the basic equipment:<br/>? console worktable k.<br/>? homatic control pc 83 with windows operation.<br/>? main spindle 12 kw.<br/>? plate changer 18x.<br/>? ingenious interface for editing machining<br/>aggregates with integrated pneumatic supply and drive<br/>c-axis.<br/>? woodwop programming system.<br/>? laser positioning aid.<br/><br/> <br/><br/>technical specifications:<br/>workpiece length with bof 411/45 / pm max. 4500 mm<br/><br/>workpiece width max. 1150 mm for all units<br/>max. 1300 mm for milling up to milling cutter Ø 20 mm<br/><br/>workpiece thickness max. 60 mm with standard clamp<br/>max. 200 mm with clamping templates (customer side)<br/><br/>the specified workpiece dimensions are not the<br/>max. possible processing variables per unit<br/>add - see separate table.<br/>the min. workpiece size depends on clamping devices,<br/>workpiece surface and contour.<br/>working height lower edge of workpiece 920 mm.<br/>soil conditions must correspond to the foundation plan.<br/><br/> <br/>main spindle 12 kw, water cooled<br/>for tool holder for hsk f63 - din 69893. incl.<br/>room extraction for all tools and units.<br/>three-phase asynchronous motor 12 kw at s1, 600 hz,<br/>water-cooled. the water circle holiday works automatically<br/>via pump and with temperature monitoring.<br/>tool weight max. 6 kg incl. recording.<br/>tool length max. 200 mm from engine spindle lower edge,<br/>tool Ø max. 180 mm for milling tools, max. 200 mm for grinding tools.<br/>frequency converter 15 kw for electronic<br/>speed ??control. speed ??range stepless<br/>programmable from 1500 to 18,000 1 / min. full<br/>rated power from 12,000 1 / min. in reducing the<br/>speed ??reduces the power accordingly.<br/>without tool holder and tools.<br/><br/>display changer 18-pack<br/>for tools and units with hsk f 63.<br/>plate changer for 18 tool / unit locations.<br/>tool weight max. 6 kg incl. recording.<br/>tool length max. 200 mm from engine spindle lower edge.<br/>possible tool and assembly equipment:<br/>- 18 x diameter max. 130 mm or<br/>- 9 x diameter max. 180 mm and<br/>    9 x diameter max. 70 mm.<br/>tool diameter max. 200 mm for grinding tool,<br/>axis-controlled drive of the tool plate for fast<br/>tool change.<br/><br/>aggregate interface for main spindle<br/>for connecting the processing units.<br/>incl. interface pneumatics and rotary actuator c-axis<br/>with torque drive and 3-point support. drive<br/>for all units with swivel axis. swivel range without<br/>limit. tubeless compressed air guide.<br/><br/> <br/>cnc programming system woodwop<br/>with this software package, cnc programs for<br/>the nc control can be created graphically interactively. it<br/>includes the following functions:<br/>? comfortable, completely menu-driven user interface,<br/>contour generation via an integrated contour tracing program /<br/>dimension inputs via absolute values ??or via variables<br/>for easy generation of variants (variant program),<br/>? menu-guided selection of individual processing / graphic<br/>representation of the programmed workpiece directly at the<br/>input on the screen,<br/>? automatic sealing of the parts.<br/><br/>post processor<br/>the postprocessor generates in conjunction with woodwop<br/>cnc programs in din 66025.<br/><br/>laser positioning aid for vacuum tensioner<br/>a separate subroutine will inform the machine<br/>guide with a laser beam (reticule) the exact sucker<br/>positions are displayed. the laser is at the main spindle<br/>grown.<br/><br/>vknr .: 7206<br/>4 lifting rails for console table sliding surface<br/>lifting rail with plastic gliding, on the side of the<br/>console attached.<br/>lifting device for 100 mm free space under the workpiece support.<br/>total stroke approx. 105 mm. lifting force per lifting rail 35 kg.<br/>the position on the consoles must be according to technical data<br/>be determined.<br/><br/>vknr .: 7316<br/>4 clamping element 3-stage manually for k-table<br/>3-stage mechanical / pneumatic clamping element for<br/>clamping straight wooden cantilevers, pairs of dumbbells and<br/>arches.<br/>arrangement on the side of the console with connection to the console<br/>compressed air system. clamping range 15 - 80 mm.<br/>pneumatic clamping elements lowerable for transfer<br/>at round arches.<br/>incl. pneumatically supported and lowered workpiece<br/>pads for wider workpieces.<br/>actuation via manual valve on the console. for sizing<br/>the clamping surfaces are too exciting for special profiles<br/>to adjust profile cross sections with homab.<br/><br/>vknr .: 7407<br/>drill head 17 spindles vertical<br/>1 motor, 1.9 kw, frequency controlled.<br/>infinitely variable speed 4000 - 7500 1 / min.,<br/>for vertical drilling, stroke 50 mm.<br/>16 drilling spindles up to max. 35 mm bore diameter,<br/>1 drilling spindle up to max. 20 mm bore diameter.<br/>each spindle individually retrievable.<br/>11 spindles in the x direction, 7 spindles in the y direction.<br/>arrangement of the spindles in t-shape.<br/>spindle distance 32 mm<br/>drill length 70 mm<br/>shank diameter 10 mm<br/>    <br/>vknr .: 7515<br/>1 sawing and drilling unit swiveling for tool changer<br/>for automatic replacement in the main spindle.<br/>for schmiegenschnitte and oblique holes.<br/>manual 0 - 90 ° swiveling.<br/>mounting flange Ø 30 mm with 4 countersunk countersunk<br/>screw m5. tc-Ø 52 mm. ll.<br/>prepared for chop saw Ø max. 220 mm.<br/>drill holder with weldon chuck Ø 10 mm.<br/>useful length acc. technical data.<br/>speed ??max. 9000 1 / min.<br/>unlimited pivoting over c-axis.<br/><br/><br/>vknr .: 7527<br/>1 milling / drilling unit 2 spindles horizontal Ø 16 mm<br/>for replacement in the main spindle.<br/>with 2 spindles for milling out lock case and forend<br/>horizontal at doors, staketenbohrungen etc.<br/>with integrated blow-out nozzle.<br/>two-sided spindle outlet:<br/>- 1 x weldon chuck diam. 16 mm<br/>total tool length max. 180 mm<br/>tool balance max. 135 mm<br/>- 1 x collet er 16 din 6499 with diam. 10 mm<br/>total tool length max. 70 mm<br/>tool balance max. 40 mm<br/>speed ??max. 12,000 1 / min.<br/>without tools.<br/>unlimited pivoting over c-axis<br/><br/><br/>machine without cleaning tools.<br/><br/>(technical information according to hesteller - without guarantee!)<br/><br/><br/><br/><br/><br/><br/> MAX. WORKPIECE LENGTH: 4500 MM
PROFILE SPINDLE: 1 STüCK
MAIN DRIVE: 12 KW
HOMAG MACHINING CENTER GENIUS BOF 411/45 / PM
-----------------------------------------------
ELECTRONICALLY CONTROLLED MILLING AND DRILLING CENTER FOR COMMISSION
WISE MANUFACTURE OF FURNITURE PARTS, SOLID WOOD PARTS AND
DEVICES, E.G. WINDOWS, DOORS, STAIRS. WITH 1 MAIN SPINDLE.

BRIEF DESCRIPTION OF THE BASIC EQUIPMENT:
? CONSOLE WORKTABLE K.
? HOMATIC CONTROL PC 83 WITH WINDOWS OPERATION.
? MAIN SPINDLE 12 KW.
? PLATE CHANGER 18X.
? INGENIOUS INTERFACE FOR EDITING MACHINING
AGGREGATES WITH INTEGRATED PNEUMATIC SUPPLY AND DRIVE
C-AXIS.
? WOODWOP PROGRAMMING SYSTEM.
? LASER POSITIONING AID.



TECHNICAL SPECIFICATIONS:
WORKPIECE LENGTH WITH BOF 411/45 / PM MAX. 4500 MM

WORKPIECE WIDTH MAX. 1150 MM FOR ALL UNITS
MAX. 1300 MM FOR MILLING UP TO MILLING CUTTER Ø 20 MM

WORKPIECE THICKNESS MAX. 60 MM WITH STANDARD CLAMP
MAX. 200 MM WITH CLAMPING TEMPLATES (CUSTOMER SIDE)

THE SPECIFIED WORKPIECE DIMENSIONS ARE NOT THE
MAX. POSSIBLE PROCESSING VARIABLES PER UNIT
ADD - SEE SEPARATE TABLE.
THE MIN. WORKPIECE SIZE DEPENDS ON CLAMPING DEVICES,
WORKPIECE SURFACE AND CONTOUR.
WORKING HEIGHT LOWER EDGE OF WORKPIECE 920 MM.
SOIL CONDITIONS MUST CORRESPOND TO THE FOUNDATION PLAN.


MAIN SPINDLE 12 KW, WATER COOLED
FOR TOOL HOLDER FOR HSK F63 - DIN 69893. INCL.
ROOM EXTRACTION FOR ALL TOOLS AND UNITS.
THREE-PHASE ASYNCHRONOUS MOTOR 12 KW AT S1, 600 HZ,
WATER-COOLED. THE WATER CIRCLE HOLIDAY WORKS AUTOMATICALLY
VIA PUMP AND WITH TEMPERATURE MONITORING.
TOOL WEIGHT MAX. 6 KG INCL. RECORDING.
TOOL LENGTH MAX. 200 MM FROM ENGINE SPINDLE LOWER EDGE,
TOOL Ø MAX. 180 MM FOR MILLING TOOLS, MAX. 200 MM FOR GRINDING TOOLS.
FREQUENCY CONVERTER 15 KW FOR ELECTRONIC
SPEED ??CONTROL. SPEED ??RANGE STEPLESS
PROGRAMMABLE FROM 1500 TO 18,000 1 / MIN. FULL
RATED POWER FROM 12,000 1 / MIN. IN REDUCING THE
SPEED ??REDUCES THE POWER ACCORDINGLY.
WITHOUT TOOL HOLDER AND TOOLS.

DISPLAY CHANGER 18-PACK
FOR TOOLS AND UNITS WITH HSK F 63.
PLATE CHANGER FOR 18 TOOL / UNIT LOCATIONS.
TOOL WEIGHT MAX. 6 KG INCL. RECORDING.
TOOL LENGTH MAX. 200 MM FROM ENGINE SPINDLE LOWER EDGE.
POSSIBLE TOOL AND ASSEMBLY EQUIPMENT:
- 18 X DIAMETER MAX. 130 MM OR
- 9 X DIAMETER MAX. 180 MM AND
9 X DIAMETER MAX. 70 MM.
TOOL DIAMETER MAX. 200 MM FOR GRINDING TOOL,
AXIS-CONTROLLED DRIVE OF THE TOOL PLATE FOR FAST
TOOL CHANGE.

AGGREGATE INTERFACE FOR MAIN SPINDLE
FOR CONNECTING THE PROCESSING UNITS.
INCL. INTERFACE PNEUMATICS AND ROTARY ACTUATOR C-AXIS
WITH TORQUE DRIVE AND 3-POINT SUPPORT. DRIVE
FOR ALL UNITS WITH SWIVEL AXIS. SWIVEL RANGE WITHOUT
LIMIT. TUBELESS COMPRESSED AIR GUIDE.


CNC PROGRAMMING SYSTEM WOODWOP
WITH THIS SOFTWARE PACKAGE, CNC PROGRAMS FOR
THE NC CONTROL CAN BE CREATED GRAPHICALLY INTERACTIVELY. IT
INCLUDES THE FOLLOWING FUNCTIONS:
? COMFORTABLE, COMPLETELY MENU-DRIVEN USER INTERFACE,
CONTOUR GENERATION VIA AN INTEGRATED CONTOUR TRACING PROGRAM /
DIMENSION INPUTS VIA ABSOLUTE VALUES ??OR VIA VARIABLES
FOR EASY GENERATION OF VARIANTS (VARIANT PROGRAM),
? MENU-GUIDED SELECTION OF INDIVIDUAL PROCESSING / GRAPHIC
REPRESENTATION OF THE PROGRAMMED WORKPIECE DIRECTLY AT THE
INPUT ON THE SCREEN,
? AUTOMATIC SEALING OF THE PARTS.

POST PROCESSOR
THE POSTPROCESSOR GENERATES IN CONJUNCTION WITH WOODWOP
CNC PROGRAMS IN DIN 66025.

LASER POSITIONING AID FOR VACUUM TENSIONER
A SEPARATE SUBROUTINE WILL INFORM THE MACHINE
GUIDE WITH A LASER BEAM (RETICULE) THE EXACT SUCKER
POSITIONS ARE DISPLAYED. THE LASER IS AT THE MAIN SPINDLE
GROWN.

VKNR .: 7206
4 LIFTING RAILS FOR CONSOLE TABLE SLIDING SURFACE
LIFTING RAIL WITH PLASTIC GLIDING, ON THE SIDE OF THE
CONSOLE ATTACHED.
LIFTING DEVICE FOR 100 MM FREE SPACE UNDER THE WORKPIECE SUPPORT.
TOTAL STROKE APPROX. 105 MM. LIFTING FORCE PER LIFTING RAIL 35 KG.
THE POSITION ON THE CONSOLES MUST BE ACCORDING TO TECHNICAL DATA
BE DETERMINED.

VKNR .: 7316
4 CLAMPING ELEMENT 3-STAGE MANUALLY FOR K-TABLE
3-STAGE MECHANICAL / PNEUMATIC CLAMPING ELEMENT FOR
CLAMPING STRAIGHT WOODEN CANTILEVERS, PAIRS OF DUMBBELLS AND
ARCHES.
ARRANGEMENT ON THE SIDE OF THE CONSOLE WITH CONNECTION TO THE CONSOLE
COMPRESSED AIR SYSTEM. CLAMPING RANGE 15 - 80 MM.
PNEUMATIC CLAMPING ELEMENTS LOWERABLE FOR TRANSFER
AT ROUND ARCHES.
INCL. PNEUMATICALLY SUPPORTED AND LOWERED WORKPIECE
PADS FOR WIDER WORKPIECES.
ACTUATION VIA MANUAL VALVE ON THE CONSOLE. FOR SIZING
THE CLAMPING SURFACES ARE TOO EXCITING FOR SPECIAL PROFILES
TO ADJUST PROFILE CROSS SECTIONS WITH HOMAB.

VKNR .: 7407
DRILL HEAD 17 SPINDLES VERTICAL
1 MOTOR, 1.9 KW, FREQUENCY CONTROLLED.
INFINITELY VARIABLE SPEED 4000 - 7500 1 / MIN.,
FOR VERTICAL DRILLING, STROKE 50 MM.
16 DRILLING SPINDLES UP TO MAX. 35 MM BORE DIAMETER,
1 DRILLING SPINDLE UP TO MAX. 20 MM BORE DIAMETER.
EACH SPINDLE INDIVIDUALLY RETRIEVABLE.
11 SPINDLES IN THE X DIRECTION, 7 SPINDLES IN THE Y DIRECTION.
ARRANGEMENT OF THE SPINDLES IN T-SHAPE.
SPINDLE DISTANCE 32 MM
DRILL LENGTH 70 MM
SHANK DIAMETER 10 MM

VKNR .: 7515
1 SAWING AND DRILLING UNIT SWIVELING FOR TOOL CHANGER
FOR AUTOMATIC REPLACEMENT IN THE MAIN SPINDLE.
FOR SCHMIEGENSCHNITTE AND OBLIQUE HOLES.
MANUAL 0 - 90 ° SWIVELING.
MOUNTING FLANGE Ø 30 MM WITH 4 COUNTERSUNK COUNTERSUNK
SCREW M5. TC-Ø 52 MM. LL.
PREPARED FOR CHOP SAW Ø MAX. 220 MM.
DRILL HOLDER WITH WELDON CHUCK Ø 10 MM.
USEFUL LENGTH ACC. TECHNICAL DATA.
SPEED ??MAX. 9000 1 / MIN.
UNLIMITED PIVOTING OVER C-AXIS.


VKNR .: 7527
1 MILLING / DRILLING UNIT 2 SPINDLES HORIZONTAL Ø 16 MM
FOR REPLACEMENT IN THE MAIN SPINDLE.
WITH 2 SPINDLES FOR MILLING OUT LOCK CASE AND FOREND
HORIZONTAL AT DOORS, STAKETENBOHRUNGEN ETC.
WITH INTEGRATED BLOW-OUT NOZZLE.
TWO-SIDED SPINDLE OUTLET:
- 1 X WELDON CHUCK DIAM. 16 MM
TOTAL TOOL LENGTH MAX. 180 MM
TOOL BALANCE MAX. 135 MM
- 1 X COLLET ER 16 DIN 6499 WITH DIAM. 10 MM
TOTAL TOOL LENGTH MAX. 70 MM
TOOL BALANCE MAX. 40 MM
SPEED ??MAX. 12,000 1 / MIN.
WITHOUT TOOLS.
UNLIMITED PIVOTING OVER C-AXIS


MACHINE WITHOUT CLEANING TOOLS.

(TECHNICAL INFORMATION ACCORDING TO HESTELLER - WITHOUT GUARANTEE!)






Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Precio: 275 €
Ubicación: Land-starter for bosch 0001402043 deutz f4l514 new larger quantities available kw 5.4
mounting holes 3
teeth 9
24 volt

comp. nr

0001402043 bosch

0001402059 bosch

0001410029 bosch

0001410030 bosch

0001414017 bosch

0001415010 bosch

0001416013 bosch

04667 efel

bomag 05710926

06710 efel

10.130.121 iskra

11.130.005 iskra

11.139.034 iskra

111248 cargo

19024578 remy (delco)

22609 efel

6130000 elmot

9124340 magneton (pal / skoda)

9125290 magneton (pal / skoda)

azk5113 iskra

deutz f4l514 f4l514 03 / 12/1958 1954 0kw / 60hp
deutz f4l514 variant nkf f4l514 01 / 1959 12/1963 0kw / 60hp
deutz f4l514 variant nsk f4l514 01 / 1959 12/1963 0kw / 65ps

hanomag hds - 01 / 12/1937 1937
hanomag ss 55 n d52ss55 01 / 1938 12/1939

kã¤lble 14 w khd a4l514 01 / 1969 12/1970 0kw / 66ps

khd motor a 4 l 514 a 4 l 514 khd motor f 4 l 514 f 4 l 514
khd motor sa 4 l 514 sa 4 l 514

mercedes-benz lz 10000 om 67 01/1937 12/1938
mercedes-benz lz 6000 om 65 01/1937 12/1938

mwm diesel engine d 233 v 12 d 233 v 12 01/1976 12/1977 mwm diesel engine d 234 v 6 d 6 03/1983-234 v / 165kw mwm diesel tbd engine 233 v 12 tbd 233 v 12 01/1976 12/1977 input error error reserved 
 STARTER FOR BOSCH 0001402043 DEUTZ F4L514 NEW LARGER QUANTITIES AVAILABLE KW 5.4 MOUNTING HOLES 3 TEETH 9 24 VOLT COMP. NR 0001402043 BOSCH 0001402059 BOSCH 0001410029 BOSCH 0001410030 BOSCH 0001414017 BOSCH 0001415010 BOSCH 0001416013 BOSCH 04667 EFEL BOMAG 05710926 06710 EFEL 10.130.121 ISKRA 11.130.005 ISKRA 11.139.034 ISKRA 111248 CARGO 19024578 REMY (DELCO) 22609 EFEL 6130000 ELMOT 9124340 MAGNETON (PAL / SKODA) 9125290 MAGNETON (PAL / SKODA) AZK5113 ISKRA DEUTZ F4L514 F4L514 03 / 12/1958 1954 0KW / 60HP DEUTZ F4L514 VARIANT NKF F4L514 01 / 1959 12/1963 0KW / 60HP DEUTZ F4L514 VARIANT NSK F4L514 01 / 1959 12/1963 0KW / 65PS HANOMAG HDS - 01 / 12/1937 1937 HANOMAG SS 55 N D52SS55 01 / 1938 12/1939 K&ATILDE;&CURREN;LBLE 14 W KHD A4L514 01 / 1969 12/1970 0KW / 66PS KHD MOTOR A 4 L 514 A 4 L 514 KHD MOTOR F 4 L 514 F 4 L 514 KHD MOTOR SA 4 L 514 SA 4 L 514 MERCEDES-BENZ LZ 10000 OM 67 01/1937 12/1938 MERCEDES-BENZ LZ 6000 OM 65 01/1937 12/1938 MWM DIESEL ENGINE D 233 V 12 D 233 V 12 01/1976 12/1977 MWM DIESEL ENGINE D 234 V 6 D 6 03/1983-234 V / 165KW MWM DIESEL TBD ENGINE 233 V 12 TBD 233 V 12 01/1976 12/1977 INPUT ERROR ERROR RESERVED
Vendedor: Baumaschinen Hut
Año de construcción: usado
Precio: 17.800 €
Ubicación: Land-; accessories: anzahl messer:14, ballenauswerfer, bordcomputer / monitor, garnbindung, netzbindung, schneidwerk, zentralschmierung, variable-kammer, einachser; working width [cm]: 210 ; ACCESSORIES: ANZAHL MESSER:14, BALLENAUSWERFER, BORDCOMPUTER / MONITOR, GARNBINDUNG, NETZBINDUNG, SCHNEIDWERK, ZENTRALSCHMIERUNG, VARIABLE-KAMMER, EINACHSER; WORKING WIDTH [CM]: 210
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Precio: 7.200 €
Ubicación: Land-formteikantenanleimmaschine ima pca stating direct glue glue basin and strips the length unit

a video of the current machine can be sent on request.

built no cheap edges moped, but industrial-grade by ima for continuous use.

this model was built by brandt also referred to as ktd 82 h and ktd 820.

for hot melt adhesives and pu adhesive, 140-220 â° c.
inner radii are dependent on the bending capacity of the edge material from approx. 150 mm, external radius.
adjustable heater for heating of the material of edges with narrow radii. when you select of the emitter, the feed speed are automatically lowered to the preset value (very useful for narrow radii).

edge thickness of 0,4-3, 0 mm
edge height approx. 20-50 mm
supply 400v/2, 6kw
feed adjustable

operating instructions
ce mark
very good condition

the machine is used for the gluing of edge strips to shape machined plates parts, there are two variants:

1. in the case of small workpieces the part about the ball transfer units of the table on the solid banding unit is passed (see photos)
the edge material can be cut automatically on the electrically set length and is promoted automatically to the unit. no lengthy scoring with his hand.

2. for large and heavy workpieces is this attached with the block suction cups on the table, and the banding unit hanging passed by on the federbalancer and crane boom on the workpiece (see photos)
the edge tape is inserted with hand, may be cut but before by the streifenablaenger automatically to the desired level.

flexible molding edging at the highest level.

the feed button will start after inserting the edge strip. edge feed and spotlights can be controlled either via a handle switch or foot pedal.

accessories:
vacuum pump with 4 new block cups, 26 ball rolling, auflegeplatte, crane with spring.

we have even an ima pca in use for several years and are very satisfied.

dimensions approx. 1450 x 1000 x 3040 mm (lxwxh). weight approx. 550kg.

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". FORMTEIKANTENANLEIMMASCHINE IMA PCA STATING DIRECT GLUE GLUE BASIN AND STRIPS THE LENGTH UNIT A VIDEO OF THE CURRENT MACHINE CAN BE SENT ON REQUEST. BUILT NO CHEAP EDGES MOPED, BUT INDUSTRIAL-GRADE BY IMA FOR CONTINUOUS USE. THIS MODEL WAS BUILT BY BRANDT ALSO REFERRED TO AS KTD 82 H AND KTD 820. FOR HOT MELT ADHESIVES AND PU ADHESIVE, 140-220 &ACIRC;&DEG; C. INNER RADII ARE DEPENDENT ON THE BENDING CAPACITY OF THE EDGE MATERIAL FROM APPROX. 150 MM, EXTERNAL RADIUS. ADJUSTABLE HEATER FOR HEATING OF THE MATERIAL OF EDGES WITH NARROW RADII. WHEN YOU SELECT OF THE EMITTER, THE FEED SPEED ARE AUTOMATICALLY LOWERED TO THE PRESET VALUE (VERY USEFUL FOR NARROW RADII). EDGE THICKNESS OF 0,4-3, 0 MM EDGE HEIGHT APPROX. 20-50 MM SUPPLY 400V/2, 6KW FEED ADJUSTABLE OPERATING INSTRUCTIONS CE MARK VERY GOOD CONDITION THE MACHINE IS USED FOR THE GLUING OF EDGE STRIPS TO SHAPE MACHINED PLATES PARTS, THERE ARE TWO VARIANTS: 1. IN THE CASE OF SMALL WORKPIECES THE PART ABOUT THE BALL TRANSFER UNITS OF THE TABLE ON THE SOLID BANDING UNIT IS PASSED (SEE PHOTOS) THE EDGE MATERIAL CAN BE CUT AUTOMATICALLY ON THE ELECTRICALLY SET LENGTH AND IS PROMOTED AUTOMATICALLY TO THE UNIT. NO LENGTHY SCORING WITH HIS HAND. 2. FOR LARGE AND HEAVY WORKPIECES IS THIS ATTACHED WITH THE BLOCK SUCTION CUPS ON THE TABLE, AND THE BANDING UNIT HANGING PASSED BY ON THE FEDERBALANCER AND CRANE BOOM ON THE WORKPIECE (SEE PHOTOS) THE EDGE TAPE IS INSERTED WITH HAND, MAY BE CUT BUT BEFORE BY THE STREIFENABLAENGER AUTOMATICALLY TO THE DESIRED LEVEL. FLEXIBLE MOLDING EDGING AT THE HIGHEST LEVEL. THE FEED BUTTON WILL START AFTER INSERTING THE EDGE STRIP. EDGE FEED AND SPOTLIGHTS CAN BE CONTROLLED EITHER VIA A HANDLE SWITCH OR FOOT PEDAL. ACCESSORIES: VACUUM PUMP WITH 4 NEW BLOCK CUPS, 26 BALL ROLLING, AUFLEGEPLATTE, CRANE WITH SPRING. WE HAVE EVEN AN IMA PCA IN USE FOR SEVERAL YEARS AND ARE VERY SATISFIED. DIMENSIONS APPROX. 1450 X 1000 X 3040 MM (LXWXH). WEIGHT APPROX. 550KG. PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Precio: 10.900 €
Ubicación: Land-; accessories: garnbindung, netzbindung, einachser; working width [cm]: 210 ; ACCESSORIES: GARNBINDUNG, NETZBINDUNG, EINACHSER; WORKING WIDTH [CM]: 210
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-offer / offer: angel victroy 1050/300 (4 pcs).

&gt; bj. / year 2008
&gt; erc robot (4 pcs)
&gt; gb 55mm &gt; accumulator

&gt; for more information please contact me!

&gt; core pull 4 x hydraulically to bap with shut-off valve and pressure relief
&gt; guard widened on operating side
&gt; mould heating 16 control loops including expansion cards
&gt; surcharge for worm s8 incl. rsp with chromium nitride coating mod.
&gt; design variant hv 4 with rule pump (pressure and flow control in closed-loop) for parallel motion sequence, injection and metering performance increases, injecting about battery
&gt; microcomputer cc200 a02 2.810,-windows-oriented visualization on the basis of a
 tft touch-screen colour monitor 15 inch
&gt; temperature control device interface
&gt; interface for fiege hot runner controller
&gt; etc...
 OFFER / OFFER: ANGEL VICTROY 1050/300 (4 PCS). &GT; BJ. / YEAR 2008 &GT; ERC ROBOT (4 PCS) &GT; GB 55MM &GT; ACCUMULATOR &GT; FOR MORE INFORMATION PLEASE CONTACT ME! &GT; CORE PULL 4 X HYDRAULICALLY TO BAP WITH SHUT-OFF VALVE AND PRESSURE RELIEF &GT; GUARD WIDENED ON OPERATING SIDE &GT; MOULD HEATING 16 CONTROL LOOPS INCLUDING EXPANSION CARDS &GT; SURCHARGE FOR WORM S8 INCL. RSP WITH CHROMIUM NITRIDE COATING MOD. &GT; DESIGN VARIANT HV 4 WITH RULE PUMP (PRESSURE AND FLOW CONTROL IN CLOSED-LOOP) FOR PARALLEL MOTION SEQUENCE, INJECTION AND METERING PERFORMANCE INCREASES, INJECTING ABOUT BATTERY &GT; MICROCOMPUTER CC200 A02 2.810,-WINDOWS-ORIENTED VISUALIZATION ON THE BASIS OF A TFT TOUCH-SCREEN COLOUR MONITOR 15 INCH &GT; TEMPERATURE CONTROL DEVICE INTERFACE &GT; INTERFACE FOR FIEGE HOT RUNNER CONTROLLER &GT; ETC...
Vendedor: Lovric Maschinenhandel e.U.
Año de construcción: usado
Precio: 6.000 €
Ubicación: Land-de Germany, 46325 Borken
Vendedor: Komplett-Konzept Verwertungs GmbH
Año de construcción: usado
Precio: 4.500 €
Ubicación: Land-formteikantenanleimmaschine ima pca stating direct glue glue basin

a video of the current machine can be sent on request.

built no cheap edges moped, but industrial-grade by ima for continuous use.

this model was built by brandt also referred to as ktd 82 h and ktd 820.

for hot melt adhesives and pu adhesive, 140-220 â° c.
inner radii are dependent on the bending capacity of the edge material from approx. 150 mm, external radius.
adjustable heater for heating of the material of edges with narrow radii. 

edge thickness of 0,4-3, 0 mm
edge height approx. 20-50 mm
supply 400v/2, 6kw

operating instructions
ce mark
very good condition

the machine is used for the gluing of edge strips to shape machined plates parts, there are two variants:

1. in the case of small workpieces the part about the ball transfer units of the table on the solid banding unit is passed (see photos)

2. for large and heavy workpieces is this attached with the block suction cups on the table, and the banding unit hanging passed by on the federbalancer and crane boom on the workpiece (see photos)
the edge tape is inserted with hand.

flexible molding edging at the highest level.

the feed button will start after inserting the edge strip. edge feed and spotlights can be controlled either via a handle switch or foot pedal.

accessories:
vacuum pump with 4 block cleaners, 26 ball rolling, auflegeplatte, crane with spring.

we have even an ima pca in use for several years and are very satisfied.

dimensions approx. 1450 x 1000 x 3160 mm (lxwxh). weight approx. 550kg.
machine is partially new painted.

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". FORMTEIKANTENANLEIMMASCHINE IMA PCA STATING DIRECT GLUE GLUE BASIN A VIDEO OF THE CURRENT MACHINE CAN BE SENT ON REQUEST. BUILT NO CHEAP EDGES MOPED, BUT INDUSTRIAL-GRADE BY IMA FOR CONTINUOUS USE. THIS MODEL WAS BUILT BY BRANDT ALSO REFERRED TO AS KTD 82 H AND KTD 820. FOR HOT MELT ADHESIVES AND PU ADHESIVE, 140-220 &ACIRC;&DEG; C. INNER RADII ARE DEPENDENT ON THE BENDING CAPACITY OF THE EDGE MATERIAL FROM APPROX. 150 MM, EXTERNAL RADIUS. ADJUSTABLE HEATER FOR HEATING OF THE MATERIAL OF EDGES WITH NARROW RADII. EDGE THICKNESS OF 0,4-3, 0 MM EDGE HEIGHT APPROX. 20-50 MM SUPPLY 400V/2, 6KW OPERATING INSTRUCTIONS CE MARK VERY GOOD CONDITION THE MACHINE IS USED FOR THE GLUING OF EDGE STRIPS TO SHAPE MACHINED PLATES PARTS, THERE ARE TWO VARIANTS: 1. IN THE CASE OF SMALL WORKPIECES THE PART ABOUT THE BALL TRANSFER UNITS OF THE TABLE ON THE SOLID BANDING UNIT IS PASSED (SEE PHOTOS) 2. FOR LARGE AND HEAVY WORKPIECES IS THIS ATTACHED WITH THE BLOCK SUCTION CUPS ON THE TABLE, AND THE BANDING UNIT HANGING PASSED BY ON THE FEDERBALANCER AND CRANE BOOM ON THE WORKPIECE (SEE PHOTOS) THE EDGE TAPE IS INSERTED WITH HAND. FLEXIBLE MOLDING EDGING AT THE HIGHEST LEVEL. THE FEED BUTTON WILL START AFTER INSERTING THE EDGE STRIP. EDGE FEED AND SPOTLIGHTS CAN BE CONTROLLED EITHER VIA A HANDLE SWITCH OR FOOT PEDAL. ACCESSORIES: VACUUM PUMP WITH 4 BLOCK CLEANERS, 26 BALL ROLLING, AUFLEGEPLATTE, CRANE WITH SPRING. WE HAVE EVEN AN IMA PCA IN USE FOR SEVERAL YEARS AND ARE VERY SATISFIED. DIMENSIONS APPROX. 1450 X 1000 X 3160 MM (LXWXH). WEIGHT APPROX. 550KG. MACHINE IS PARTIALLY NEW PAINTED. PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Ubicación: Land-x-travel: unbek. mm<br/>y-travel: unbek. mm<br/>z-travel:  mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> X-TRAVEL: UNBEK. MM
Y-TRAVEL: UNBEK. MM
Z-TRAVEL: MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-angel victroy 1050/300 (4 pcs).

&gt; bj. / year 2008
&gt; erc robot (4 pcs)
&gt; gb 55mm ('a' quality)
&gt; accumulator

&gt; for more information please contact me!

&gt; core pull 4 x hydraulically to bap with shut-off valve and pressure relief
&gt; guard widened on operating side
&gt; mould heating 16 control loops including expansion cards
&gt; surcharge for worm s8 incl. rsp with chromium nitride coating mod.
&gt; design variant hv 4 with rule pump (pressure and flow control in closed-loop) for parallel motion sequence, injection and metering performance increases, injecting about battery
&gt; microcomputer cc200 a02 2.810,-windows-oriented visualization on the basis of a
 tft touch-screen colour monitor 15 inch
&gt; temperature control device interface
&gt; interface for fiege hot runner controller
&gt; etc...
 ANGEL VICTROY 1050/300 (4 PCS). &GT; BJ. / YEAR 2008 &GT; ERC ROBOT (4 PCS) &GT; GB 55MM ('A' QUALITY) &GT; ACCUMULATOR &GT; FOR MORE INFORMATION PLEASE CONTACT ME! &GT; CORE PULL 4 X HYDRAULICALLY TO BAP WITH SHUT-OFF VALVE AND PRESSURE RELIEF &GT; GUARD WIDENED ON OPERATING SIDE &GT; MOULD HEATING 16 CONTROL LOOPS INCLUDING EXPANSION CARDS &GT; SURCHARGE FOR WORM S8 INCL. RSP WITH CHROMIUM NITRIDE COATING MOD. &GT; DESIGN VARIANT HV 4 WITH RULE PUMP (PRESSURE AND FLOW CONTROL IN CLOSED-LOOP) FOR PARALLEL MOTION SEQUENCE, INJECTION AND METERING PERFORMANCE INCREASES, INJECTING ABOUT BATTERY &GT; MICROCOMPUTER CC200 A02 2.810,-WINDOWS-ORIENTED VISUALIZATION ON THE BASIS OF A TFT TOUCH-SCREEN COLOUR MONITOR 15 INCH &GT; TEMPERATURE CONTROL DEVICE INTERFACE &GT; INTERFACE FOR FIEGE HOT RUNNER CONTROLLER &GT; ETC...
Vendedor: Lovric Maschinenhandel e.U.
Año de construcción: usado
Ubicación: Land-turning diameter: 340 mm<br/>turning length: 800 mm<br/>control: heidenhain pilot 3190 turn plus<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>the machine was 2018 geometrically and mechanically<br/>reconditioned and is available immediately.<br/>a set of standard turning tool holders is included.<br/><br/><br/>technical specifications<br/>working range: machine nominal length (nl) 800<br/>distance of turning spindle flange-tailstock center mm 987<br/>swing diameter over bed slide / bed mm 460/670<br/>turning diameter above bed carriage mm 340<br/><br/>work spindle (variant i, direct drive):<br/>diameter in front bearing mm 120<br/>bore through mm 83<br/>spindle head din 55026 form a size 8<br/>total speed range 1 / min 25-5000<br/>drive power at s1-100% / s6-40% ed kw 37/50<br/>max. torque at s1-100% / s6-40% ed nm 276/372<br/><br/>c-axis about main drive with disc brake<br/><br/>sleigh bed / cross slide:<br/>longitudinal travel x-axis mm 270<br/>longitudinal path -nl 800 z-axis mm 878<br/>rapid traverse x- / z-axis m / min 15<br/><br/>tool carrier system: (top right)<br/>drum tool storage - raise tool positions 12<br/>tool holder din 69880<br/>shank diameter mm 40<br/>with drive unit for rotating tools<br/>speed ??range 1 / min 4000<br/>p max. at 100% / 40% ed kw 5.2 / 9.2<br/>m max. at 100% / 40% ed nm 19/28<br/><br/>tailstock:<br/>automatically positionable via towing device<br/>pinole diameter / quill stroke mm 100/140<br/>inner cone mk 4<br/><br/>coolant system / chip conveyor:<br/>discharge height chip conveyor mm 1200<br/>hydraulic central unit and central lubrication system<br/>bed<br/>4-strip bed (45 ° arrangement) made of mineral cast (granitan)<br/>management systems<br/>guiding systems with hardened and ground steel strips.<br/>narrow flat guides with prestressed roller elements in both axes<br/>for high geometric accuracy<br/>and sliding guides for absorbing the cutting forces.<br/><br/>machine full protection with automatic chip protection door<br/><br/>cnc control heidenhain cnc pilot 3190 with turn plus<br/><br/>3 baking power chuck autoblok<br/>diameter 305 mm<br/><br/><br/><br/><br/> TURNING DIAMETER: 340 MM
TURNING LENGTH: 800 MM
CONTROL: HEIDENHAIN PILOT 3190 TURN PLUS
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
THE MACHINE WAS 2018 GEOMETRICALLY AND MECHANICALLY
RECONDITIONED AND IS AVAILABLE IMMEDIATELY.
A SET OF STANDARD TURNING TOOL HOLDERS IS INCLUDED.


TECHNICAL SPECIFICATIONS
WORKING RANGE: MACHINE NOMINAL LENGTH (NL) 800
DISTANCE OF TURNING SPINDLE FLANGE-TAILSTOCK CENTER MM 987
SWING DIAMETER OVER BED SLIDE / BED MM 460/670
TURNING DIAMETER ABOVE BED CARRIAGE MM 340

WORK SPINDLE (VARIANT I, DIRECT DRIVE):
DIAMETER IN FRONT BEARING MM 120
BORE THROUGH MM 83
SPINDLE HEAD DIN 55026 FORM A SIZE 8
TOTAL SPEED RANGE 1 / MIN 25-5000
DRIVE POWER AT S1-100% / S6-40% ED KW 37/50
MAX. TORQUE AT S1-100% / S6-40% ED NM 276/372

C-AXIS ABOUT MAIN DRIVE WITH DISC BRAKE

SLEIGH BED / CROSS SLIDE:
LONGITUDINAL TRAVEL X-AXIS MM 270
LONGITUDINAL PATH -NL 800 Z-AXIS MM 878
RAPID TRAVERSE X- / Z-AXIS M / MIN 15

TOOL CARRIER SYSTEM: (TOP RIGHT)
DRUM TOOL STORAGE - RAISE TOOL POSITIONS 12
TOOL HOLDER DIN 69880
SHANK DIAMETER MM 40
WITH DRIVE UNIT FOR ROTATING TOOLS
SPEED ??RANGE 1 / MIN 4000
P MAX. AT 100% / 40% ED KW 5.2 / 9.2
M MAX. AT 100% / 40% ED NM 19/28

TAILSTOCK:
AUTOMATICALLY POSITIONABLE VIA TOWING DEVICE
PINOLE DIAMETER / QUILL STROKE MM 100/140
INNER CONE MK 4

COOLANT SYSTEM / CHIP CONVEYOR:
DISCHARGE HEIGHT CHIP CONVEYOR MM 1200
HYDRAULIC CENTRAL UNIT AND CENTRAL LUBRICATION SYSTEM
BED
4-STRIP BED (45 ° ARRANGEMENT) MADE OF MINERAL CAST (GRANITAN)
MANAGEMENT SYSTEMS
GUIDING SYSTEMS WITH HARDENED AND GROUND STEEL STRIPS.
NARROW FLAT GUIDES WITH PRESTRESSED ROLLER ELEMENTS IN BOTH AXES
FOR HIGH GEOMETRIC ACCURACY
AND SLIDING GUIDES FOR ABSORBING THE CUTTING FORCES.

MACHINE FULL PROTECTION WITH AUTOMATIC CHIP PROTECTION DOOR

CNC CONTROL HEIDENHAIN CNC PILOT 3190 WITH TURN PLUS

3 BAKING POWER CHUCK AUTOBLOK
DIAMETER 305 MM




Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-in the sales order for sale:

silmo / okemo ozone immersion bath sterilizer variant viii / 110v ozone
masch. no. 1246 - ozone generator 86/6 1986.

documentation and spare parts list available

IN THE SALES ORDER FOR SALE: SILMO / OKEMO OZONE IMMERSION BATH STERILIZER VARIANT VIII / 110V OZONE MASCH. NO. 1246 - OZONE GENERATOR 86/6 1986. DOCUMENTATION AND SPARE PARTS LIST AVAILABLE
Vendedor: Okema Kellereimaschinen GmbH
Año de construcción: usado
Ubicación: Land-turning diameter:780 mm<br/>turning length:4.500 mm<br/>control: <br/>swing Ø over carriage:760 mm<br/>turning diameter over total length  :760 mm<br/>turning axis high over floor:1.300 mm<br/>z-axis moving:5.054 mm<br/>mainspindle drive with gear box (variante ii): <br/>power 100/60% ed:67,4/80 kw<br/>total speed:10 - 2.600 min-1<br/>speed in gear step i :10 - 975 min-1<br/>speed in gear step ii:10 - 2.600 min-1<br/>diameter in front bearing:240 mm<br/>spindle bore:160 mm<br/>spindle nose din 55026:größe 15 <br/>max. torque gear step i, ed 60%:3.135 nm<br/>max. torque gear step ii ed 60% :967 nm<br/>c ? axis: <br/>resolution of measuring system:+/- 0,001  °<br/>max. torque ed 60% :3.135  nm<br/>turning speed range:0 - 50 min-1<br/>power of brake:2.300 nm<br/>hydraulical cylinder for power chuck ovs-150 with control: <br/>2 pressure stage programmable: <br/>with integrated y-slide in tool turret : <br/>with integrated y-slide in tool turret : <br/>x-axis :435 mm<br/>y-axis:+/- 65 mm<br/>z-axis:5.054 mm<br/>rapid feed y-x-z:10/18/30 m/min<br/>max. feed:18.000/30.000 mm/min<br/>max. feed power y-/x-/z-axis:4,5/12/20 kn<br/>measurement system x- und z-axis linear, absolute, y-axis with motor measuring system: <br/>16-fold tool turret: <br/>with drive for live tools:2 x 8 pos.  <br/>tool taper:vdi 50 <br/>pitch circle 1, 8 pos. vdi 50:470 mm<br/>pitch circle 2, 8 pos. vdi 50 :590 mm<br/>spindle speed stepless:10-3.200  min-1<br/>2 pc. nc-positionable steady carriage: <br/>equipped with 2 pc. steadys: <br/>self-centering steadys brand smw : <br/>working area steady 1:45 - 310 mm<br/>working area steady 2:250 - 300 mm<br/>tailstock nc-positionable: <br/>rapid feed max.:12 m/min<br/>diameter of quill:150 mm<br/>quill speed:8 m/min<br/>quill stroke:160 mm<br/>cone:5 mk<br/>axial power manual adjustable:4- 25 kn<br/>total power requirement: kw<br/>weight of the machine ca.: t<br/>dimensions of the machine ca.: m<br/><br/> equipment, accessories  - all drives digital servo technic from siemens  - coolant unit consisting of:   coolant tank 1000 l, standard pump 11 bar/40l/min, high pressure pump 70 bar, band filter unit,    - chip conveyor  - dust exhausting brand ilt, typ unifil 60, capacity ca. 3.600 m³/h  - complete covering with automatic doors  - 1 pc. 3-jaw-chuck rÖhm duro nc 400/3  - 1 st. 3-jaw-chuck rÖhm duro nc 500/3  div. tool holders + div. live tools  TURNING DIAMETER:780 MM
TURNING LENGTH:4.500 MM
CONTROL:
SWING Ø OVER CARRIAGE:760 MM
TURNING DIAMETER OVER TOTAL LENGTH :760 MM
TURNING AXIS HIGH OVER FLOOR:1.300 MM
Z-AXIS MOVING:5.054 MM
MAINSPINDLE DRIVE WITH GEAR BOX (VARIANTE II):
POWER 100/60% ED:67,4/80 KW
TOTAL SPEED:10 - 2.600 MIN-1
SPEED IN GEAR STEP I :10 - 975 MIN-1
SPEED IN GEAR STEP II:10 - 2.600 MIN-1
DIAMETER IN FRONT BEARING:240 MM
SPINDLE BORE:160 MM
SPINDLE NOSE DIN 55026:GRößE 15
MAX. TORQUE GEAR STEP I, ED 60%:3.135 NM
MAX. TORQUE GEAR STEP II ED 60% :967 NM
C ? AXIS:
RESOLUTION OF MEASURING SYSTEM:+/- 0,001 °
MAX. TORQUE ED 60% :3.135 NM
TURNING SPEED RANGE:0 - 50 MIN-1
POWER OF BRAKE:2.300 NM
HYDRAULICAL CYLINDER FOR POWER CHUCK OVS-150 WITH CONTROL:
2 PRESSURE STAGE PROGRAMMABLE:
WITH INTEGRATED Y-SLIDE IN TOOL TURRET :
WITH INTEGRATED Y-SLIDE IN TOOL TURRET :
X-AXIS :435 MM
Y-AXIS:+/- 65 MM
Z-AXIS:5.054 MM
RAPID FEED Y-X-Z:10/18/30 M/MIN
MAX. FEED:18.000/30.000 MM/MIN
MAX. FEED POWER Y-/X-/Z-AXIS:4,5/12/20 KN
MEASUREMENT SYSTEM X- UND Z-AXIS LINEAR, ABSOLUTE, Y-AXIS WITH MOTOR MEASURING SYSTEM:
16-FOLD TOOL TURRET:
WITH DRIVE FOR LIVE TOOLS:2 X 8 POS.
TOOL TAPER:VDI 50
PITCH CIRCLE 1, 8 POS. VDI 50:470 MM
PITCH CIRCLE 2, 8 POS. VDI 50 :590 MM
SPINDLE SPEED STEPLESS:10-3.200 MIN-1
2 PC. NC-POSITIONABLE STEADY CARRIAGE:
EQUIPPED WITH 2 PC. STEADYS:
SELF-CENTERING STEADYS BRAND SMW :
WORKING AREA STEADY 1:45 - 310 MM
WORKING AREA STEADY 2:250 - 300 MM
TAILSTOCK NC-POSITIONABLE:
RAPID FEED MAX.:12 M/MIN
DIAMETER OF QUILL:150 MM
QUILL SPEED:8 M/MIN
QUILL STROKE:160 MM
CONE:5 MK
AXIAL POWER MANUAL ADJUSTABLE:4- 25 KN
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M

EQUIPMENT, ACCESSORIES - ALL DRIVES DIGITAL SERVO TECHNIC FROM SIEMENS - COOLANT UNIT CONSISTING OF: COOLANT TANK 1000 L, STANDARD PUMP 11 BAR/40L/MIN, HIGH PRESSURE PUMP 70 BAR, BAND FILTER UNIT, - CHIP CONVEYOR - DUST EXHAUSTING BRAND ILT, TYP UNIFIL 60, CAPACITY CA. 3.600 M³/H - COMPLETE COVERING WITH AUTOMATIC DOORS - 1 PC. 3-JAW-CHUCK RÖHM DURO NC 400/3 - 1 ST. 3-JAW-CHUCK RÖHM DURO NC 500/3 DIV. TOOL HOLDERS + DIV. LIVE TOOLS
Vendedor: FLECKENSTEIN Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-concrete block production machine
with board transport below the machine

the lifting and lowering ladder, as well as the finger car are not for sale  CONCRETE BLOCK PRODUCTION MACHINE WITH BOARD TRANSPORT BELOW THE MACHINE THE LIFTING AND LOWERING LADDER, AS WELL AS THE FINGER CAR ARE NOT FOR SALE
Vendedor: BeTeMa GmbH
Año de construcción: usado
Ubicación: Land-drills with morse-taper from mt1 up to mt6, normal length and extra long. as well reamers in different variants DRILLS WITH MORSE-TAPER FROM MT1 UP TO MT6, NORMAL LENGTH AND EXTRA LONG. AS WELL REAMERS IN DIFFERENT VARIANTS
Vendedor: Peter Jüttermann Werkzeugmaschinen
Año de construcción: usado
Precio: 10.995 €
Ubicación: Land-schneider electric inverter atv950c13n4f 132kw, 400/440 series altivar process atv900 product or component type frequency inverters (ean 3606480884085) device application industry application short name of the appliance atv950 version with switch-disconnectors without brake chopper destination induction motors synchronous motors mounting variant bodenstehend emc filter integrated complies with iec/en 61800-3 category c3 protection class (ip) ip54 conforms to iec 61800-5-1 ip54 conforms to iec 60529 cooling type forced-air cooling mains frequency 50-60 hz (+/-5%) number of network phases 3 phases nominal auxiliary voltage [uh, nom] 380... 440 v (-15...10%) motor power (kw) 132 kw (standard overload) 110 kw (high overload) power 232 a for 400 v (standard overload) 197 (a) for 400 v (high overload) 250 a at 380 v (standard overload) 207 a at 380 v (high overload) short circuit power ik 50 ka apparent power 161 kva at 400 v () standard overload) 136 kva at 400 v (high overload) output rated current 250 a at 2.5 of khz (standard overload) 211 (a) 2.5 khz (high overload) maximum peak current 300 a during 60 s (standard overload) 317 a during 60 s (high overload) type motor control asynchronous motor constant variable torque optimized mode torque control profile for synchronous motors permanent magnet motor output frequency 0.1.. 599 hz of rated frequency of 2.5 of khz clock frequency 2... 8 khz adjustable 2, 5... 8 khz derating factor safety function sto (safe torque off (safe torque off) sil 3 logic input 16 preset speeds communication protocol of modbus ethernet/ip, serial modbus tcp) SCHNEIDER ELECTRIC INVERTER ATV950C13N4F 132KW, 400/440 SERIES ALTIVAR PROCESS ATV900 PRODUCT OR COMPONENT TYPE FREQUENCY INVERTERS (EAN 3606480884085) DEVICE APPLICATION INDUSTRY APPLICATION SHORT NAME OF THE APPLIANCE ATV950 VERSION WITH SWITCH-DISCONNECTORS WITHOUT BRAKE CHOPPER DESTINATION INDUCTION MOTORS SYNCHRONOUS MOTORS MOUNTING VARIANT BODENSTEHEND EMC FILTER INTEGRATED COMPLIES WITH IEC/EN 61800-3 CATEGORY C3 PROTECTION CLASS (IP) IP54 CONFORMS TO IEC 61800-5-1 IP54 CONFORMS TO IEC 60529 COOLING TYPE FORCED-AIR COOLING MAINS FREQUENCY 50-60 HZ (+/-5%) NUMBER OF NETWORK PHASES 3 PHASES NOMINAL AUXILIARY VOLTAGE [UH, NOM] 380... 440 V (-15...10%) MOTOR POWER (KW) 132 KW (STANDARD OVERLOAD) 110 KW (HIGH OVERLOAD) POWER 232 A FOR 400 V (STANDARD OVERLOAD) 197 (A) FOR 400 V (HIGH OVERLOAD) 250 A AT 380 V (STANDARD OVERLOAD) 207 A AT 380 V (HIGH OVERLOAD) SHORT CIRCUIT POWER IK 50 KA APPARENT POWER 161 KVA AT 400 V () STANDARD OVERLOAD) 136 KVA AT 400 V (HIGH OVERLOAD) OUTPUT RATED CURRENT 250 A AT 2.5 OF KHZ (STANDARD OVERLOAD) 211 (A) 2.5 KHZ (HIGH OVERLOAD) MAXIMUM PEAK CURRENT 300 A DURING 60 S (STANDARD OVERLOAD) 317 A DURING 60 S (HIGH OVERLOAD) TYPE MOTOR CONTROL ASYNCHRONOUS MOTOR CONSTANT VARIABLE TORQUE OPTIMIZED MODE TORQUE CONTROL PROFILE FOR SYNCHRONOUS MOTORS PERMANENT MAGNET MOTOR OUTPUT FREQUENCY 0.1.. 599 HZ OF RATED FREQUENCY OF 2.5 OF KHZ CLOCK FREQUENCY 2... 8 KHZ ADJUSTABLE 2, 5... 8 KHZ DERATING FACTOR SAFETY FUNCTION STO (SAFE TORQUE OFF (SAFE TORQUE OFF) SIL 3 LOGIC INPUT 16 PRESET SPEEDS COMMUNICATION PROTOCOL OF MODBUS ETHERNET/IP, SERIAL MODBUS TCP)
Vendedor: KRASTEV EX-IMPORT
Año de construcción: usado
Ubicación: Land-<br>turning diameter: 1050 mm<br>turning length: 4000 mm<br>turret positions: 0<br>cnc brand: heidenhain<br>cnc model: manuel plus <br><p>make tos variant </p>
<p>type sua 100 cnc variant</p>
<p>year 11 / 2001</p>
<p>tos variant heidenhain manuel plus draaibank</p>
<p>centre height (mm)swing bed =  1.050</p>
<p>center distance (mm)swing sup = 730</p>
<p>spindle bore dbc = 4.000</p>
<p>bore = 1154 chuck 800 mm</p>
<p>3 x steady rest* mot. tailstock * feed top slide * work load 8 t</p>
<p>
TURNING DIAMETER: 1050 MM
TURNING LENGTH: 4000 MM
TURRET POSITIONS: 0
CNC BRAND: HEIDENHAIN
CNC MODEL: MANUEL PLUS

MAKE TOS VARIANT&NBSP;

TYPE SUA 100 CNC VARIANT

YEAR 11 / 2001

TOS VARIANT HEIDENHAIN MANUEL PLUS DRAAIBANK

CENTRE HEIGHT (MM)SWING BED = &NBSP;1.050

CENTER DISTANCE (MM)SWING SUP = 730

SPINDLE BORE DBC = 4.000

BORE = 1154 CHUCK 800 MM

3 X STEADY REST* MOT. TAILSTOCK * FEED TOP SLIDE * WORK LOAD 8 T

Vendedor: Mach4metal
Año de construcción: usado
Precio: 99.000 €
Ubicación: Land-courtyard mobile variant of the sm 518 proven, compact, moving axis. COURTYARD MOBILE VARIANT OF THE SM 518 PROVEN, COMPACT, MOVING AXIS.
Vendedor: Rottenkolber Umwelttechnik
Año de construcción: usado
Ubicación: Land-is this unit when in operation. without sources. fully functional. IS THIS UNIT WHEN IN OPERATION. WITHOUT SOURCES. FULLY FUNCTIONAL.
Vendedor: BHD- UG
Año de construcción: usado
Ubicación: Land-lab test equipment		
varian 3400 with varian 8035 autosampler
 LAB TEST EQUIPMENT VARIAN 3400 WITH VARIAN 8035 AUTOSAMPLER
Vendedor: UFM
Año de construcción: usado
Ubicación: Land-opp tape production line 

1. coating machine
make:p&t(korea)
manufacturing year:2014
coating : 4 coater
web width : max. 1,300?
machine speed :
max.80~8m/min
main drive motor : ac vector motor
380v, 60hz, 3p
1) 1st unwinder
*: 2shaft auto turret
* turret type
- geared motor/ worm&worm
*tension control: dancer roll/a.c servo
- ac servo motor : mitsubishi
* 3 OPP TAPE PRODUCTION LINE 1. COATING MACHINE MAKE:P&T(KOREA) MANUFACTURING YEAR:2014 COATING : 4 COATER WEB WIDTH : MAX. 1,300? MACHINE SPEED : MAX.80~8M/MIN MAIN DRIVE MOTOR : AC VECTOR MOTOR 380V, 60HZ, 3P 1) 1ST UNWINDER *: 2SHAFT AUTO TURRET * TURRET TYPE - GEARED MOTOR/ WORM&WORM *TENSION CONTROL: DANCER ROLL/A.C SERVO - AC SERVO MOTOR : MITSUBISHI * 3" AIR SHAFT + 6" ADAPTOR * SIDE-LAY ADJUSTMENT : MOTOR AUTO EPC * SHAFT CHUCKING : AIR CYLINDER * SPLICING : CROSS CUT / AUTO SPLICING 2) IN-FEED UNIT - IN-FEED ROLL : ?210? - NIP ROLL : ?180? * TENSION CONTROL - AC SERVO MOTOR : MITSUBISHI - TENSION PICK-UP : MITSYBISHI 3) WEB CLEANER ROLL(?85) - SAFETY COVER - 1ST, 2ND UNWINDER 2SET - CRONA 1SET 4) CRONA TREATMENT(MAKE:HANKOOK:KOREA) * MODEL : HK-7000 * 1ST, 2ND UNWINDER 1SET 5) MAYER BAR COATING UNIT * MAYER BAR SERVO MOTOR * BAR - FORMDE ROD, ?40?, SUS 304 6) 1ST DRY OVEN UNIT * ROLL SUPPORT TYPE(?118?, ) * JET NOZZLE HEAT FAN DRY TYPE * DRY TEMP.: MAX. 130? 7) MICRO GRAVURE COATING UNIT * MICRO GRAVUR ROLL 8) SLOT DIE & COMMA COATING UNIT * SLOT DIE & COMMA COATING UNIT CHANGEABLE * DIE, COMMA ROLL ATTACHING,DETACHING POSSIBLE * VACCUM CHAMBER UNIT * COMMA ROLL - 9) MAIN DRYING UNIT * DRY TEMP. : MAX. 200? * TEMPERATURE CONTROL AUTOMATIC 10) UV LAMP ZONE * UV TYPE - METAL HANLIDE UV LAMP : 4 LAMP - DUCT BLOWER - WAVE 365?, LENGTH 1400? - WAVE VARIANCE: VOLUME 3STAGE CONTROL - HOT MIRROR SHUTTER : AUTOMATIC CONTROL - TEMPERATURE SENSOR - CHAMBER GLASS WOOL 11) 2ND UNWINDER UNIT 12) CRONA * MODEL : HK-7000 * 1ST, 2ND UNWINDER 1SET 13) LAMINATOR UNIT * SIDE-LAY ADJUSTMENT : MOTOR, AUTO EPC - CPC ROLL : ?180?, AL+EPDM * LAMINATOR ROLL - OUT-DIA 210? (HEATING, COOLING) - STEEL+HCR - AC SERVO MOTOR : MITSUBISHI * NIP ROLL - ?180?, STKM+RTV 14) DELAMI & SCRAP WINDER UNIT 16) TRIMMING WINDER UNIT * : 3" AIR SHAFT WINDING, TRAVERSE 2. SLITTING MACHINE MAKE:P&T(KOREA) MANUFACTURING YEAR:2014 MODEL : 13S-SV-ITS-800 WEB WIDTH : MAX. 650? WEB THICKNESS : MAX.80? MACHINE SPEED : MAX.100M/MIN SLITTING : SHEAR KNIFE CUTTING * TENSION : AC SERVO * GAP ROLL UNIT : BY GAP SENSOR, LM - ROLL : ?98?, AL+NBR 3. SLITTING MACHINE MAKE:P&T(KOREA) MANUFACTURING YEAR:2014 WEB WIDTH : MAX. 1280? WEB THICKNESS : MAX.80? MACHINE SPEED : MAX.100M/MIN SLITTING TYPE : SHEAR KNIFE CUTTING 3) TRIMMING UNIT * 3" AIR SHAFT WINDING. TRAVERSE * WINDING DIA.: ?300? * WING TYPE : CENTER WINDING * TENSION : AC SERVO 4) REWINDING UNIT * TENSION : AC SERVO * GAP ROLL UNIT : LM BY GAP SENSOR - ROLL : ?98? 4. RTO MAKE:DIBOX(KOREA) MANUFACTURING YEAR:2014 MODEL : RTO-R5000-42K TYPE : ROTARY 1-CAN TYPE VOC ELIMINATION EFFICIENCY : MIN 99%, THC BASIS RTO HEAT RECOVERY EFFICIENCY : MEAN 90% CERAMIC : CERAMIC HONEYCOMB TREATMENT CAPACITY : 700N/HR? * INSIDE : SOFT CERAMIC REFRACTORY PYRO-BLOC/THERMAL * TEMPERATURE : 800±50? 2) BURNER * FUEL : GAS(LNG) * CAPACITY : 900,000KCAL/HR * MAKER : NORTH AMERICAN * FLARE DETECTOR : UV SANNER 3) ACCUMULATOR FOR HEATER * MATERIAL : SS400, T6.0 * : SOFT CERAMIC REFRACTORY PYRO-BLOC/THERMAL * :150?×150?×300?(43× 4) ROTARY VALVE * RATCHET GEAR TYPE * * DRIVE : ELEC. DRIVE * MOTOR : 380V×60HZ×3P, 3.7KW 5) RTO F.D FAN * TYPE : FORCED DRAFT / TURBO * MOTOR : 380V×60HZ×3P, 90KW * FLUID CONTROLL : INVERTER 90KW 6) PURGE FAN * FORCED DRAFT / TURBO * MOTOR : 380V×60HZ×3P, 11KW * FLUID CONTROLL : MANUAL DAMPER 7) COMBUSTION FAN MOTOR : 380V×60HZ×4P, 11KW 8) GAS DETECTOR * LEL DETCTOR : MAKER-GASTRON 5 .BOILER MAKE:SPI(KOREA) MANUFACTURING YEAR:2014 1,000,000 KCAL/HR 800,000 KCAL/HR 1) GAS BURNER * COMBUSTION CONTROL * FUEL : LPG * MOTOR : 4.5KW 6 .CLEAN ROOM MAKE:YOUNGSUNG(KOREA) MANUFACTURING YEAR:2014 DESIGN STANDARD : 10,000CLASS 7.SLICER MAKE:BOYOUNG(KOREA) MANUFACTURING YEAR:2014 MATERIAL TAPE: WIDTH 1300?, DIA. 230? SERVO MOTOR CONTROL CORE : 3" 8.MIXER MAKE:DAEDONG(KOREA) MANUFACTURING YEAR:2014 DISSOLVER 2SET HYDRAULIC VACUUM TYPE 10HP×380V ×4P×60HZ BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-double mitre saw dg 104

description 
the optimal double mitre saw for series production as well as for special applications
the universal pivoting and tilting of both saw units allows cutting of high and wide profiles as well as every type of compound mitre. consequently, many profiles can be cut without support blocks
external-dimension cuts possible for all cutting variants. consequently, no complicated length calculations are necessary. this is a big advantage when cutting special angles
pivoting range with digital angle display
safety hoods
equipped with saw blades as standard
equipped with digital display e 111 as standard
pulsed coolant system
technical specifications 
minimum cutting length at 90° 350 mm
minimum cutting length tilted at 45° 350 mm
pivoting range inwards 90° - 45° 
(up to 22.5° manual with digital display)
tilting range inwards pneumatically 90° - 45°
for cutting range, see cutting diagram
saw blade diameter 420 mm
saw blade speed 2,800 rpm
power supply 230/400 v, 3~, 50 hz
power output per motor 4 kw
compressed air supply 7 bar
air consumption per working cycle 40 l without spraying, 64 l with spraying
cutting length 
6,000 mm
options 
dg 104 m machine bed made of steel sheet 
(cutting length 4,500 mm, 6,000 mm)
software for e 555: software module for chop and oversize length cuts

machine is well maintained and working without any problem. perfect condition. machine has included e555 industrial pc. 
 DOUBLE MITRE SAW DG 104 DESCRIPTION THE OPTIMAL DOUBLE MITRE SAW FOR SERIES PRODUCTION AS WELL AS FOR SPECIAL APPLICATIONS THE UNIVERSAL PIVOTING AND TILTING OF BOTH SAW UNITS ALLOWS CUTTING OF HIGH AND WIDE PROFILES AS WELL AS EVERY TYPE OF COMPOUND MITRE. CONSEQUENTLY, MANY PROFILES CAN BE CUT WITHOUT SUPPORT BLOCKS EXTERNAL-DIMENSION CUTS POSSIBLE FOR ALL CUTTING VARIANTS. CONSEQUENTLY, NO COMPLICATED LENGTH CALCULATIONS ARE NECESSARY. THIS IS A BIG ADVANTAGE WHEN CUTTING SPECIAL ANGLES PIVOTING RANGE WITH DIGITAL ANGLE DISPLAY SAFETY HOODS EQUIPPED WITH SAW BLADES AS STANDARD EQUIPPED WITH DIGITAL DISPLAY E 111 AS STANDARD PULSED COOLANT SYSTEM TECHNICAL SPECIFICATIONS MINIMUM CUTTING LENGTH AT 90° 350 MM MINIMUM CUTTING LENGTH TILTED AT 45° 350 MM PIVOTING RANGE INWARDS 90° - 45° (UP TO 22.5° MANUAL WITH DIGITAL DISPLAY) TILTING RANGE INWARDS PNEUMATICALLY 90° - 45° FOR CUTTING RANGE, SEE CUTTING DIAGRAM SAW BLADE DIAMETER 420 MM SAW BLADE SPEED 2,800 RPM POWER SUPPLY 230/400 V, 3~, 50 HZ POWER OUTPUT PER MOTOR 4 KW COMPRESSED AIR SUPPLY 7 BAR AIR CONSUMPTION PER WORKING CYCLE 40 L WITHOUT SPRAYING, 64 L WITH SPRAYING CUTTING LENGTH 6,000 MM OPTIONS DG 104 M MACHINE BED MADE OF STEEL SHEET (CUTTING LENGTH 4,500 MM, 6,000 MM) SOFTWARE FOR E 555: SOFTWARE MODULE FOR CHOP AND OVERSIZE LENGTH CUTS MACHINE IS WELL MAINTAINED AND WORKING WITHOUT ANY PROBLEM. PERFECT CONDITION. MACHINE HAS INCLUDED E555 INDUSTRIAL PC.
Vendedor: Almetay Makine Plastik Metal Yapi Elm.San.Tic.LTD.
Año de construcción: usado
Precio: 953 €
Ubicación: Land-this offer includes:

material for:

1 basic fields and 5 extension panels 3,000 x 1,050 mm 24 7 frame trusses 2,700 x ce120 mm
   48 pins
   14 ground anchor, load signs

the bars have a usable length of 2,700 mm.

the permissible load capacity is 2,800 kg
(when uniformly distribuited load) 933 kg per pallet!

trusses are secured with locking pins and are adjustable in a grid of 50 mm.

connectors - easy assembly!
frames are assembled!

frame in height

6,900 and 5,700 mm, 4,500 mm in stock traverse variants: 3,600 mm / 1800 mm THIS OFFER INCLUDES: MATERIAL FOR: 1 BASIC FIELDS AND 5 EXTENSION PANELS 3,000 X 1,050 MM 24 7 FRAME TRUSSES 2,700 X CE120 MM 48 PINS 14 GROUND ANCHOR, LOAD SIGNS THE BARS HAVE A USABLE LENGTH OF 2,700 MM. THE PERMISSIBLE LOAD CAPACITY IS 2,800 KG (WHEN UNIFORMLY DISTRIBUITED LOAD) 933 KG PER PALLET! TRUSSES ARE SECURED WITH LOCKING PINS AND ARE ADJUSTABLE IN A GRID OF 50 MM. CONNECTORS - EASY ASSEMBLY! FRAMES ARE ASSEMBLED! FRAME IN HEIGHT 6,900 AND 5,700 MM, 4,500 MM IN STOCK TRAVERSE VARIANTS: 3,600 MM / 1800 MM
Vendedor: eth Ericus Transport u. Handelsges.mbH
Año de construcción: usado
Precio: 794 €
Ubicación: Land-this offer includes:

material for:

1 basic fields and 10 extension panels 5 frame 3,000 x 1,050 mm 16 truss 2,700 x ce110 mm
   32 pins
   10 ground stake, load signs

the bars have a usable length of 2,700 mm.

the permissible load capacity is 2,800 kg
(when uniformly distribuited load) 933 kg per pallet!

trusses are secured with locking pins and are adjustable in a grid of 50 mm.

connectors - easy assembly!
frames are assembled!

frame in height

6,900 and 5,700 mm, 4,500 mm in stock traverse variants: 3,600 mm / 1800 mm THIS OFFER INCLUDES: MATERIAL FOR: 1 BASIC FIELDS AND 10 EXTENSION PANELS 5 FRAME 3,000 X 1,050 MM 16 TRUSS 2,700 X CE110 MM 32 PINS 10 GROUND STAKE, LOAD SIGNS THE BARS HAVE A USABLE LENGTH OF 2,700 MM. THE PERMISSIBLE LOAD CAPACITY IS 2,800 KG (WHEN UNIFORMLY DISTRIBUITED LOAD) 933 KG PER PALLET! TRUSSES ARE SECURED WITH LOCKING PINS AND ARE ADJUSTABLE IN A GRID OF 50 MM. CONNECTORS - EASY ASSEMBLY! FRAMES ARE ASSEMBLED! FRAME IN HEIGHT 6,900 AND 5,700 MM, 4,500 MM IN STOCK TRAVERSE VARIANTS: 3,600 MM / 1800 MM
Vendedor: eth Ericus Transport u. Handelsges.mbH
Año de construcción: usado
Precio: 619 €
Ubicación: Land-this offer includes:

material for:

1 basic fields and 10 extension panels 5 frame 3,000 x 1,050 mm 16 truss 2,700 x ce110 mm
  32 pins
  10 ground stake, load signs

the bars have a usable length of 2,700 mm.

the permissible load capacity is 2,800 kg
(when uniformly distribuited load) 933 kg per pallet!

trusses are secured with locking pins and are adjustable in a grid of 50 mm.

connectors - easy assembly!
frames are assembled!

frame in height

6,900 and 5,700 mm, 4,500 mm in stock traverse variants: 3,600 mm / 1800 mm THIS OFFER INCLUDES: MATERIAL FOR: 1 BASIC FIELDS AND 10 EXTENSION PANELS 5 FRAME 3,000 X 1,050 MM 16 TRUSS 2,700 X CE110 MM 32 PINS 10 GROUND STAKE, LOAD SIGNS THE BARS HAVE A USABLE LENGTH OF 2,700 MM. THE PERMISSIBLE LOAD CAPACITY IS 2,800 KG (WHEN UNIFORMLY DISTRIBUITED LOAD) 933 KG PER PALLET! TRUSSES ARE SECURED WITH LOCKING PINS AND ARE ADJUSTABLE IN A GRID OF 50 MM. CONNECTORS - EASY ASSEMBLY! FRAMES ARE ASSEMBLED! FRAME IN HEIGHT 6,900 AND 5,700 MM, 4,500 MM IN STOCK TRAVERSE VARIANTS: 3,600 MM / 1800 MM
Vendedor: eth Ericus Transport u. Handelsges.mbH
Año de construcción: usado
Precio: 2.450 €
Ubicación: Land-meter read-out: 72,572 miles
power type: gas
amount of previous owners: 1
full service history: yes
axle configuration: 4x2
drive type: front
drive: left hand
engine power: 193 hp (133 kw)
engine displacement 169 in3
top speed: 144 mph
transmission: manual
emission class: euro 0
front tires: 75%
rear tires: 75%
no. of seats: 5
electric windows, auxiliary heating, adjustable steering wheel, heated seats, signal system, immobiliser, abs, airbags, electrical mirrors

fire department car, in very good condition, absolutely no rust!
electric mirrors, adjustable driver's seat, climate control, airbag, abs, servo, air/olie heater, blue light bar on roof and in grill, visibeam2 searchlight on roof.  METER READ-OUT: 72,572 MILES POWER TYPE: GAS AMOUNT OF PREVIOUS OWNERS: 1 FULL SERVICE HISTORY: YES AXLE CONFIGURATION: 4X2 DRIVE TYPE: FRONT DRIVE: LEFT HAND ENGINE POWER: 193 HP (133 KW) ENGINE DISPLACEMENT 169 IN3 TOP SPEED: 144 MPH TRANSMISSION: MANUAL EMISSION CLASS: EURO 0 FRONT TIRES: 75% REAR TIRES: 75% NO. OF SEATS: 5 ELECTRIC WINDOWS, AUXILIARY HEATING, ADJUSTABLE STEERING WHEEL, HEATED SEATS, SIGNAL SYSTEM, IMMOBILISER, ABS, AIRBAGS, ELECTRICAL MIRRORS FIRE DEPARTMENT CAR, IN VERY GOOD CONDITION, ABSOLUTELY NO RUST! ELECTRIC MIRRORS, ADJUSTABLE DRIVER'S SEAT, CLIMATE CONTROL, AIRBAG, ABS, SERVO, AIR/OLIE HEATER, BLUE LIGHT BAR ON ROOF AND IN GRILL, VISIBEAM2 SEARCHLIGHT ON ROOF.
Vendedor: MerchantSumborg AS
Año de construcción: usado
Precio: 73 €
Ubicación:
condition: good
available: by appointment or until no later than the end of april
location: berlin.gif" alt="Land-approx. 89 pieces needed hand trucks, stacking cart, package carts, alukarre - -:

site price:

price at time of purchase of the total: eur6.500.-(net) = eur73.-/ st.

price / piece (net):

option 1 - new -: eur125.-
variant 1 - used -: eur85.-
variant 2: eur75
variant 3: eur125.-

version 1 - number of pieces must be filed after approx. 50 pcs -:
manufacturer: fetra
type: a1331l
year of constr.: 2016 and new (packed z.t.original)
new: 15 pieces
needed: approx. 35 pcs
new price: eur 180.- / piece
total width: 590 mm
total height: 1300 mm
tires: air 260 x 85
weight: 9 kg
load capacity: 200 kg
blade length: 250 mm
shovel width: 320 mm
color: grey
material: aluminium
herstellertext:
from aluminium tube with aluminium shovel, very light and handy. clean welded and \"natural\", alublechschaufel on and thereby interchangeable. optional full rubber or pneumatic tyres on plastic rims, hubs with roller bearings. bent through clamp top and cross braces. for the safe transport of round items such as roles, cans, buckets etc disassembled delivery!

condition: good
available: by appointment or until no later than the end of april
location: berlin" style="height: 18px;"> APPROX. 89 PIECES NEEDED HAND TRUCKS, STACKING CART, PACKAGE CARTS, ALUKARRE - -:

SITE PRICE:

PRICE AT TIME OF PURCHASE OF THE TOTAL: EUR6.500.-(NET) = EUR73.-/ ST.

PRICE / PIECE (NET):

OPTION 1 - NEW -: EUR125.-
VARIANT 1 - USED -: EUR85.-
VARIANT 2: EUR75
VARIANT 3: EUR125.-

VERSION 1 - NUMBER OF PIECES MUST BE FILED AFTER APPROX. 50 PCS -:
MANUFACTURER: FETRA
TYPE: A1331L
YEAR OF CONSTR.: 2016 AND NEW (PACKED Z.T.ORIGINAL)
NEW: 15 PIECES
NEEDED: APPROX. 35 PCS
NEW PRICE: EUR 180.- / PIECE
TOTAL WIDTH: 590 MM
TOTAL HEIGHT: 1300 MM
TIRES: AIR 260 X 85
WEIGHT: 9 KG
LOAD CAPACITY: 200 KG
BLADE LENGTH: 250 MM
SHOVEL WIDTH: 320 MM
COLOR: GREY
MATERIAL: ALUMINIUM
HERSTELLERTEXT:
FROM ALUMINIUM TUBE WITH ALUMINIUM SHOVEL, VERY LIGHT AND HANDY. CLEAN WELDED AND \"NATURAL\", ALUBLECHSCHAUFEL ON AND THEREBY INTERCHANGEABLE. OPTIONAL FULL RUBBER OR PNEUMATIC TYRES ON PLASTIC RIMS, HUBS WITH ROLLER BEARINGS. BENT THROUGH CLAMP TOP AND CROSS BRACES. FOR THE SAFE TRANSPORT OF ROUND ITEMS SUCH AS ROLES, CANS, BUCKETS ETC DISASSEMBLED DELIVERY!

CONDITION: GOOD
AVAILABLE: BY APPOINTMENT OR UNTIL NO LATER THAN THE END OF APRIL
LOCATION: BERLIN
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Precio: 6.950 €
Ubicación: Land-wide clamping rack or pallet rack, used with chipboard, 88 fields - -:<br/>   <br/>  site price:<br/>   <br/>  price at time of purchase of the total: eur6.950.-(net), dismantled and loaded!<br/>   <br/>  subsets on request!<br/>   <br/>  manufacturer and type: unknown<br/>  capacity: unknown<br/>  year of constr.: 2016/17<br/>  all levels with wood floors (panels) and deep webs for increased payloads<br/>  partly with pallet stops (as trusses)<br/>  variant 1 - 52 fields -:<br/>  width: 2, 7m<br/>  depth: 0, 8m<br/>  number of layers: 4<br/>   <br/>  variant 2-36 fields -:<br/>  width: 2, 7m<br/>  depth: 1, 2m<br/>  number of layers: 2<br/>   <br/>  condition: good<br/>  available: by appointment or until no later than the end of april<br/>  location: berlin WIDE CLAMPING RACK OR PALLET RACK, USED WITH CHIPBOARD, 88 FIELDS - -:

SITE PRICE:

PRICE AT TIME OF PURCHASE OF THE TOTAL: EUR6.950.-(NET), DISMANTLED AND LOADED!

SUBSETS ON REQUEST!

MANUFACTURER AND TYPE: UNKNOWN
CAPACITY: UNKNOWN
YEAR OF CONSTR.: 2016/17
ALL LEVELS WITH WOOD FLOORS (PANELS) AND DEEP WEBS FOR INCREASED PAYLOADS
PARTLY WITH PALLET STOPS (AS TRUSSES)
VARIANT 1 - 52 FIELDS -:
WIDTH: 2, 7M
DEPTH: 0, 8M
NUMBER OF LAYERS: 4

VARIANT 2-36 FIELDS -:
WIDTH: 2, 7M
DEPTH: 1, 2M
NUMBER OF LAYERS: 2

CONDITION: GOOD
AVAILABLE: BY APPOINTMENT OR UNTIL NO LATER THAN THE END OF APRIL
LOCATION: BERLIN
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Precio: 830 €
Ubicación: Land-; ready for operation ; READY FOR OPERATION
Vendedor: Komplett-Konzept Verwertungs GmbH
Año de construcción: usado
Precio: 8.000 €
Ubicación: Land-; ready for operation ; READY FOR OPERATION
Vendedor: Komplett-Konzept Verwertungs GmbH
Año de construcción: usado
Precio: 4.800 €
Ubicación: Land-1 lot of 10 new pumps.
varian vacuum pump unused from army storage, 115 volt version, production date is 2011.
pump in original unopened cartons are delivered.
inquiries about shipping costs for germany, uk or eu-rest.

technical data (values in parentheses when using a 230-> 115volt converter):

free air displacement (l / min): 45.5 (2, 3 m² / h at 50 hz)
pumping speed (cfm): 1.2 (1, 8 m² / h at 50 hz)
ultimate pressure (mbar): 4 x 10-3, 2 x 10-3 mbar with gas ballast
rotational speed (rpm): 3480 (2280 at 50 hz)
inlet flange: dn 16
exhaust flange: dn 16  1 LOT OF 10 NEW PUMPS. VARIAN VACUUM PUMP UNUSED FROM ARMY STORAGE, 115 VOLT VERSION, PRODUCTION DATE IS 2011. PUMP IN ORIGINAL UNOPENED CARTONS ARE DELIVERED. INQUIRIES ABOUT SHIPPING COSTS FOR GERMANY, UK OR EU-REST. TECHNICAL DATA (VALUES IN PARENTHESES WHEN USING A 230-> 115VOLT CONVERTER): FREE AIR DISPLACEMENT (L / MIN): 45.5 (2, 3 M² / H AT 50 HZ) PUMPING SPEED (CFM): 1.2 (1, 8 M² / H AT 50 HZ) ULTIMATE PRESSURE (MBAR): 4 X 10-3, 2 X 10-3 MBAR WITH GAS BALLAST ROTATIONAL SPEED (RPM): 3480 (2280 AT 50 HZ) INLET FLANGE: DN 16 EXHAUST FLANGE: DN 16
Vendedor: Herr Michael Dinglinger
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more VARIAN types: